| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoClusterMIB | 1.3.6.1.4.1.9.9.134 | | | The MIB module for the management of a group of
devices called a 'cluster'. A cluster comprises:
1. A command switch, which is a device that can provide
a single point of management (including SNMP, Web
Console and CLI/Telnet Console) for the devices
in the cluster;
2. Zero or more expansion switches, or called the
cluster members throughout the context of this MIB,
which are devices that can be managed via a command
switch. The command switch is also considered as a
cluster member. Thus it has an entry in the MIB tables
defined below for cluster members.
Only the command switch IP address, passwords, and SNMP
community strings need to be configured in order to
provide management access to members of the cluster.
The Entity MIB is cross-referenced from this MIB for
some of its table entries, which contain useful
information about a cluster. For example, in the
Entity MIB, there is the logical table which contains
the community string. This information is used to
access detailed management information for some logical
entity (the cluster, in this case).
To determine if a particular device can be a command switch
or a member switch please refer to the device's
user's guide. |
| ciscoClusterMIBObjects | 1.3.6.1.4.1.9.9.134.1 | | | |
| ccStatus | 1.3.6.1.4.1.9.9.134.1.1 | | | |
| STR ccStatusClusterName | 1.3.6.1.4.1.9.9.134.1.1.1 | SnmpAdminString | read-write | The name of the cluster. Cluster command switch
functionality is only enabled if this object is
a non-NULL string. Strings containing all blanks
or a NULL string will disable the cluster.
This object and ccStatusClusterMode in this MIB are
the only objects that will be instantiated if the
command switch functionality is not enabled. |
| INT ccStatusClusterModeEx | 1.3.6.1.4.1.9.9.134.1.1.2 | INTEGER | read-only | The mode of the device. A device can become a member
switch only when it is added to the cluster at the command
switch. For devices that do not belong to any cluster,
the ccStatusClusterMode is set to 'none'. |
| TDO ccStatusCommanderTDomain | 1.3.6.1.4.1.9.9.134.1.1.3 | TDomain | read-only | Indicates the kind of transport service used by the command
switch of the cluster. Possible values for this object, such
as snmpUDPDomain, are defined in the Transport Mappings for
SNMPv2 document (RFC 1906). |
| ADR ccStatusCommanderTAddress | 1.3.6.1.4.1.9.9.134.1.1.4 | TAddress | read-only | The transport service address of the command switch
of the cluster. The address is formatted according to the
corresponding value of ccStatusCommanderTDomain.
For snmpUDPDomain, a TAddress is 6 octets long, the
initial 4 octets containing the IP-address in network-byte
order and the last 2 containing the UDP port in network-byte
order. Consult 'Transport Mappings for Version 2 of the
Simple Network Management Protocol' (RFC 1906) for further
information on snmpUDPDomain. |
| MAC ccStatusCommanderMacAddress | 1.3.6.1.4.1.9.9.134.1.1.5 | MacAddress | read-only | The management MAC address of the command switch of the
cluster. |
| TIM ccStatusTimeOfLastChange | 1.3.6.1.4.1.9.9.134.1.1.6 | TimeStamp | read-only | The value of sysUpTime on the command switch when
the last time the value of an instance of ccMemberOperStatus
changed. The value 0 indicates that no member's status
has ever changed since commander system initialization. |
| TDO ccStatusLastNMSAddMemberTDomain | 1.3.6.1.4.1.9.9.134.1.1.7 | TDomain | read-only | Indicates the kind of transport service used by the
the last NMS tried to add a member to the cluster. |
| ADR ccStatusLastNMSAddMemberTAddress | 1.3.6.1.4.1.9.9.134.1.1.8 | TAddress | read-only | The transport service address of the last NMS which
tried to add a member to the cluster. The address is
formatted according to the corresponding value of
ccStatusLastNMSAddMemberTDomain. |
| INT ccStatusLastFailureAddMember | 1.3.6.1.4.1.9.9.134.1.1.9 | INTEGER | read-only | The reason why the last NMS was unable to add a switch
to be a member of the cluster.
password: The member has an enable password configured.
overmax: Adding the member exceeds the maximum number of
cluster members supported by the command switch.
See ccStatusMaxNumberOfMembers.
noncandidate: The member is not a candidate switch, or it
does not show up in the candidate table.
memberNumberInUse: The member number is used by an existing
member in the cluster.
unreachable: The member is a candidate but is unreachable or
has no connectivity. |
| U32 ccStatusMaxNumberOfMembers | 1.3.6.1.4.1.9.9.134.1.1.10 | Unsigned32 | read-only | The maximum number of cluster members allowed in the
cluster. The command switch is considered as a cluster
member also. |
| STR ccStatusMemberOrder | 1.3.6.1.4.1.9.9.134.1.1.11 | SnmpAdminString | read-write | The suggested order in which the cluster members are
displayed in network management applications. The
format of the string is n1,n2,n3,n4, ..., where
is any valid member number in the cluster. The
member numbers are separated by commas with no spaces
in between. An example of the object's value is
'3,8,14,0,2' for a cluster containing member numbers
0, 2, 3, 8, and 14. |
| ccMember | 1.3.6.1.4.1.9.9.134.1.2 | | | |
| ccMemberTable | 1.3.6.1.4.1.9.9.134.1.2.1 | | not-accessible | This table contains one row per cluster member,
including the command switch. |
| ccMemberEntry | 1.3.6.1.4.1.9.9.134.1.2.1.1 | | not-accessible | An entry containing cluster management information
applicable to a particular cluster member. |
| MAC ccMemberMacAddress | 1.3.6.1.4.1.9.9.134.1.2.1.1.1 | MacAddress | not-accessible | The management MAC address of the member device. |
| U32 ccMemberNumber | 1.3.6.1.4.1.9.9.134.1.2.1.1.2 | Unsigned32 | read-create | An arbitrary value which uniquely identifies the
cluster member switch number. It ranges from 1 to
ccStatusMaxNumberOfMembers. |
| INT ccMemberOperStatus | 1.3.6.1.4.1.9.9.134.1.2.1.1.3 | INTEGER | read-only | The status of cluster management connectivity between
the command switch and a cluster member. Cluster management
connectivity is determined by the exchange of cluster
management messages between the command switch and a
cluster member. A member that has failed to exchange
cluster management messages with the command switch is
deemed to be inactive. Otherwise, it is deemed to be active. |
| I32 ccMemberEntityLogicalIndex | 1.3.6.1.4.1.9.9.134.1.2.1.1.4 | Integer32 | read-only | The value of entLogicalIndex in the ENTITY-MIB
corresponding to this cluster member. Creating an
entry in this table creates a corresponding entry
in the entLogicalTable in the ENTITY-MIB. |
| ROW ccMemberRowStatus | 1.3.6.1.4.1.9.9.134.1.2.1.1.5 | RowStatus | read-create | The status of this conceptual row. A device
is added to the cluster of a command switch by
creating an entry in this table for the device. The
devices currently eligible to be added into the
cluster are listed in the ccCandidateTable.
An attempt to add a new member may fail. See
ccStatusLastFailureAddMember for possible reasons
for that failure. |
| ccCandidate | 1.3.6.1.4.1.9.9.134.1.3 | | | |
| ccCandidateTable | 1.3.6.1.4.1.9.9.134.1.3.1 | | not-accessible | This table contains one row per cluster candidate,
A cluster candidate is a device that is currently
eligible to be added to the cluster of a command
switch. A device is eligible if it satisfies the
following conditions:
1. It supports the cluster management protocol.
2. It is directly connected to an existing cluster
member.
The entries in this table and the entries in
ccMemberTable are mutually exclusive at all
times. That is, any device that is a cluster
member never shows up in the ccCandidateTable
or is never a candidate at the same time . Also, any
candidate that shows up in ccCandidateTable should not
appear in ccMemberTable. |
| ccCandidateEntry | 1.3.6.1.4.1.9.9.134.1.3.1.1 | | not-accessible | An entry pertaining to a single candidate device. |
| MAC ccCandidateMacAddress | 1.3.6.1.4.1.9.9.134.1.3.1.1.1 | MacAddress | read-only | The MAC address of a device qualified to
to be a cluster member of the command switch
cluster. |
| ciscoClusterMIBNotificationsPrefix | 1.3.6.1.4.1.9.9.134.2 | | | |
| ciscoClusterMIBNotifications | 1.3.6.1.4.1.9.9.134.2.0 | | | |
| NTF ccStatusMemberStatusChange | 1.3.6.1.4.1.9.9.134.2.0.1 | | | A cluster member status change notification
is generated whenever the value of any instance
of ccClusterMemberOperStatus changes after the
member is completely added to the cluster. |
| ciscoClusterMIBConformance | 1.3.6.1.4.1.9.9.134.3 | | | |
| ciscoClusterMIBCompliances | 1.3.6.1.4.1.9.9.134.3.1 | | | |
| ciscoClusterCompliance | 1.3.6.1.4.1.9.9.134.3.1.1 | | | The compliance statement for the CLUSTER MIB. |
| ciscoClusterComplianceRev1 | 1.3.6.1.4.1.9.9.134.3.1.2 | | | The compliance statement for the CLUSTER MIB. |
| ciscoClusterMIBGroups | 1.3.6.1.4.1.9.9.134.3.2 | | | |
| ciscoClusterStatusGroup | 1.3.6.1.4.1.9.9.134.3.2.1 | | | The collection of objects which are used to represent
the status of the cluster. These objects are accessible
on the command switch. |
| ciscoClusterMemberStatusGroup | 1.3.6.1.4.1.9.9.134.3.2.2 | | | The collection of objects which are used to represent
the status of the cluster. These objects are accessible
on the cluster members and the command switch. |
| ciscoClusterMemberGroup | 1.3.6.1.4.1.9.9.134.3.2.3 | | | The collection of objects which are used to represent
the members of a cluster. These objects are accessible
on the command switch only. |
| ciscoClusterCandidateGroup | 1.3.6.1.4.1.9.9.134.3.2.4 | | | The collection of objects which are used to represent
cluster candidates. These objects are accessible
on the command switch only. |
| ciscoClusterNotificationGroup | 1.3.6.1.4.1.9.9.134.3.2.5 | | | The collection of notifications defined for the cluster
candidates. |
