CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB

All MIBs › CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2011-01-13

Category: Cisco Devices, Telephony and VoIP

Description: Manages Cisco TelePresence Exchange system providing conference scheduling, bridge resources, and call statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB?

CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB is a Cisco Systems proprietary MIB providing component-level configuration, status, statistics, and alarm notifications for the Cisco TelePresence Exchange System (CTX), a cloud-based video-conferencing scheduling and resource-management platform. Its service-provider table records provider key/name/description and hosted-directory number, a region table nests under a provider, an organization table (keyed under a region) records name, description, max ports, and direct-dial capability, and a resource table tracks underlying conferencing resources. As a configuration/status MIB it lets an administrator discover cluster nodes and resources, and monitor licensing, backup, and scheduling-allocation status across a multi-tenant CTX deployment. It is deployed on the Cisco TelePresence Exchange System (CTX) platform. Engineers can download the CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco TelePresence Exchange System (CTX) platform

Monitoring Examples

An administrator checks ctxOrganizationMaxPorts against actual port usage to confirm a customer organization on a Cisco TelePresence Exchange System hasn't exhausted its allocated conferencing capacity.

What Can Be Monitored

cluster node/resource discovery
licensing and scheduling-allocation status

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From CISCO-SYSLOG-MIB

SyslogSeverity

From CISCO-TC

CiscoPort

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using ctxResourceUnavailTrans OID:

Select a Cisco TelePresence Exchange System (CTX) platform as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ctxResourceUnavailTrans into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object specifies a counter that increments when the resource transitions to unreachable or failed state from another state. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF ciscoCTXSysAdminServersStatusChg	1.3.6.1.4.1.9.9.758.0.1			This notification is sent when the ctxAdminServersStatus changes. ctxStatusChangeNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysCallAbnormalDisconnect	1.3.6.1.4.1.9.9.758.0.15			This notification will be sent when there is an abnormal call disconnect. The call disconnect reason will be detailed in ctxNotifyMessage. ctxCallFailureNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysCallEnginesStatusChg	1.3.6.1.4.1.9.9.758.0.3			This notification is sent when the ctxCallEnginesStatus changes. ctxStatusChangeNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysCallSetupFailure	1.3.6.1.4.1.9.9.758.0.14			This notification will be sent when there is a call setup/routing failure between the CTX System and a resource. The cause for the setup failure will be detailed in ctxNotifyMessage. ctxCallFailureNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysClusterNodeDown	1.3.6.1.4.1.9.9.758.0.9			This notification will be sent when there is a network connectivity or probe monitor failure to the cluster node from the admin server. ctxClusterNodeAlarmNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysClusterNodeUp	1.3.6.1.4.1.9.9.758.0.10			This notification will be sent when the cluster node connectivity is restored or when the probe monitor is successful in monitoring the node after being down. ctxClusterNodeAlarmNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysDatabaseServersStatusChg	1.3.6.1.4.1.9.9.758.0.2			This notification is sent when the ctxDatabaseServerStatus changes. ctxStatusChangeNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysErrorHistoryEvent	1.3.6.1.4.1.9.9.758.0.16			This notification is sent when a new ctxErrorHistoryEntry is created. If the event being logged does not have an organization name, this varbind entry will be an empty string value. ctxErrorHistoryEventNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysLicenseFailure	1.3.6.1.4.1.9.9.758.0.7			This notification is sent for the following license violation failures: 1. DEMO License Errors a. Warnings 5 days prior to Demo License expiration if the user has not installed a permanent license. b. Error message immediately after the Demo License expiration if the user has not installed a permanent license. 2. Volume Based Licensing Errors a. Warning message that the system is reaching the license capacity if using more than 75% of current licenses b. Error Message that the system is violating the current licensing capacity and will soon start rejecting the calls if using more than 100% and less than 150% of available licenses c. Error message that the system will reject calls if claiming more than 150% of available licenses. ctxLicenseAlarmNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysResourceAllocFailure	1.3.6.1.4.1.9.9.758.0.13			This notification will be sent when a resource allocation failure occurs. ctxResourceAlarmNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysResourceDown	1.3.6.1.4.1.9.9.758.0.11			This notification will be sent when there is a network connectivity or probe monitor failure to the resource. This can be a SIP OPTION PING, XMLRPC, or network connectivity failure. The ctxNotifyMessage will contain the failure details. ctxResourceAlarmNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysResourceStatusChg	1.3.6.1.4.1.9.9.758.0.4			This notification is sent when the ctxResourceStatus changes. ctxStatusChangeNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysResourceUp	1.3.6.1.4.1.9.9.758.0.12			This notification will be sent when the resource connectivity is restored or when the probe monitor is successful in monitoring the resource after being down. ctxResourceAlarmNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysSystemBackupStatusChg	1.3.6.1.4.1.9.9.758.0.6			This notification is sent when the ctxSystemBackupStatus changes. ctxStatusChangeNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysSystemConfigStatusChg	1.3.6.1.4.1.9.9.758.0.5			This notification is sent when the ctxSystemConfigStatus changes. ctxStatusChangeNotifyEnable controls whether this notification is sent or not.
NTF ciscoCTXSysUserAuthFailure	1.3.6.1.4.1.9.9.758.0.8			This notification will be sent when a user authentication failure results in CTX System. 1. User authentication errors while trying to log into the CTX System Admin UI. 2. User authentication errors while trying to log into the CTX System CLI. ctxAuthFailureNotifyEnable controls whether this notification is sent or not.
ciscoTelepresenceExchangeSystemMIB	1.3.6.1.4.1.9.9.758			The main purpose of this MIB is to provide product component level configuration, status, statistics, events, and alarm notifications for the Cisco TelePresence Exchange System (CTX System). A network management entity can use this MIB to: - Discover cluster nodes - Discover resources and their configurations - Monitor status of all cluster nodes - Monitor status of resources - Monitor configuration status - Monitor license status - Monitor backup process status - Monitor scheduling allocation failures and port usage statistics - Monitor product level error events - Receive real time notifications for status change and error ******************************* System Overview ***************************** Cisco TelePresence Exchange System (CTX System) is a turnkey solution tailored to service providers who want to offer premium video collaboration services and TelePresence as a service to enterprise customers. The CTX System solution preserves the full TelePresence experience across enterprise and service provider boundaries, integrates with third party SD/HD video technology, and maximizes service and network value via tight integration with other Cisco video and unified collaboration products. The Cisco TelePresence Exchange is comprised of a variety of components in order to deliver a highly integrated video service platform that will meet the needs of the service provider. At the heart of the exchange is what we refer to as the core components that are standards based platforms containing custom software to deliver the majority of the systems services and functions. These core components are the Cisco TelePresence Exchange System. ***************************** System Components ***************************** The core components are broken down into three application functional areas; administration, call processing, and persistent data storage. Each application is run on a dedicated server. Each dedicated server has a backup server. For each CTX System there are six servers. The collection of servers are considered a cluster and the servers are considered nodes within the cluster. The below diagram illustrates the CTX System: Cisco TelePresence Exchange System (CTX System) /--------------------------------------------\ \| --------------- --------------- \| \| \| Admin 1 \| \| Admin 2 \| \| \| --------------- --------------- \| \| \| \| \| \| --------------- --------------- \| \| \| Call Engine 1 \| \| Call Engine 2 \| \| \| --------------- --------------- \| \| \| \| \| \| --------------- --------------- \| \| \| Database 1 \| \| Database 2 \| \| \| --------------- --------------- \| \--------------------------------------------/ The overall system requires a number of other Cisco platforms to deliver an end-to-end solution. These other platforms are configured in the CTX System as resources. ***************************** Implementation ***************************** The administration servers provide management interfaces for the CTX System cluster nodes and for the resources configured. This MIB consolidates the configuration, status, alarms, errors, and statistics for all cluster nodes. Therefore this MIB will only be implemented on the admin servers. Each admin server can be polled independently or via a virtual IP address. Each admin server functions in an active/active mode with the same set of information. Hardware and operating system level information, such as CPU, memory, power supplies, fans, etc. remain accessible in hardware and operating system specific MIBS, such as HOST-RESOURCES-MIB, IF-MIB, ... ***************************** Configuration Tables and Linking ***************************** Configuration table hierarchal structure is as follows: ___ \|- Cluster Nodes - CTX System devices \| \|- Service Providers - Logical grouping \|-- Regions - Logical grouping \| \| \| \|--- Resources - General configs for resources \| \| that are common to all resources \| \| \| \|--- SIP Configs - SIP configurations such as \| \| SIP IP, port, and protocol \| \| \| \|--- Meeting Configs - Meeting configurations \| \| such as Min/Max meeting ID's \| \| \| \|--- Capacity Configs - Media port counts, \| \| large meeting support, etc. \| \|-- Organizations All configuration table entries have a globally unique key. No two keys will be the same within or across configuration tables. The intent is to allow network management applications to use these unique keys to link or join associated tables together. Configuration tables that have an association to another table will contain a key reference object. Multiple associations may exist, so the key reference will contain a number in the object name. This number indicates only that there are multiple associations. The reference key object name will have the appended syntax 'KeyRef1'. Optionally there maybe 'KeyRef2', etc. when multiple associations exist. Example of linking associated tables: REGION TABLE Entry: ctxRegionKey.1 = STRING: 8a960c882aa5cd64012aa5d3963b0028 ctxRegionName.1 = STRING: San Francisco ctxRegionDescr.1 = STRING: null ctxRegionServiceProviderKeyRef1.1 = STRING: 8a960c882aa5cd64012aa5d144730017 RESOURCE TABLE Entry: ctxResourceKey.1 = STRING: 8a960c882aca4db8012aca9bbdb401dd ctxResourceName.1 = STRING: abc-cuvcm ctxResourceDescr.1 = STRING: abc-cuvcm ctxResourceMgmtIPType.1 = INTEGER: ipv4(1) ctxResourceMgmtIPAddr.1 = STRING: 0.0.0.0 ctxResourceDeviceType.1 = INTEGER: cuvcm(9) ctxResourceRegionKeyRef1.1 = STRING: 8a960c882aa5cd64012aa5d3963b0028 For the above entry we can see that there is a ctxResourceRegionKeyRef1 that has the ctxRegionKey value for region 'San Francisco' . Therefore resource 'abc-cuvcm' is associated to region 'San Francisco' ***************************** Glossary ******************************* CTX System : Cisco TelePresence Exchange System Service Provider : A service provider is configured in the CTX System and serves as a logical grouping of configuration objects. Region : A region is defined as a set of 'like' resources in terms of network latency, jitter, quality of service, etc. Normally a region is a geographic area such as Americas, Europe, or Asia Pacific, but a region can be a smaller set of like resources such as East and West regions. Resource : A resource is server or network device that the CTX System includes in configuration to provide call signaling, media services, scheduling, or other function. Cluster Node: A cluster node is a server within the CTX System, such as admin server, call engine server, or database server. SIP Protocol: SIP protocol is the transport protocol used to exchange messages between user agents. The protocols are described in RFC3261. Port : Port is the media session port allocation, also referred to as screen E.164 : E.164 is an ITU-T recommendation for telephone numbers. Reference link http://www.itu.int/rec/T-REC-E.164/en Endpoint: End system TelePresence device CUCM : Cisco Unified Communications Manager SBC : Session Border Controller such as ASR-1000 CUBE(sp) CTMS : Cisco TelePresence Multipoint Switch CTS : Cisco TelePresence System endpoint CTS-MAN : Cisco TelePresence Manager CUVCM : Cisco Unified Videoconferencing Manager Media2 : Tandberg MSE 8510 blade TPS : Tandberg MSE 8710 blade VCS : Tandberg Video Communication Server TMS : Tandberg Management Suite XMLRPC : XML Remote Procedure Call protocol
ciscoTelepresenceExchangeSystemMIBCompliances	1.3.6.1.4.1.9.9.758.7.1
ciscoTelepresenceExchangeSystemMIBConfigGroup	1.3.6.1.4.1.9.9.758.7.2.2			CTX System configuration object group.
ciscoTelepresenceExchangeSystemMIBConform	1.3.6.1.4.1.9.9.758.7
ciscoTelepresenceExchangeSystemMIBErrorHistoryGroup	1.3.6.1.4.1.9.9.758.7.2.5			CTX System error history table objects.
ciscoTelepresenceExchangeSystemMIBGroups	1.3.6.1.4.1.9.9.758.7.2
ciscoTelepresenceExchangeSystemMIBModuleCompliance	1.3.6.1.4.1.9.9.758.7.1.1			The compliance statement for entities which implement the Cisco Telepresence Exchange MIB.
ciscoTelepresenceExchangeSystemMIBNotfyObjectsGroup	1.3.6.1.4.1.9.9.758.7.2.4			CTX System notify objects.
ciscoTelepresenceExchangeSystemMIBNotifs	1.3.6.1.4.1.9.9.758.0
ciscoTelepresenceExchangeSystemMIBNotifyGroup	1.3.6.1.4.1.9.9.758.7.2.6			CTX System trap/notifications.
ciscoTelepresenceExchangeSystemMIBObjects	1.3.6.1.4.1.9.9.758.1
ciscoTelePresenceExchangeSystemMIBStatsGroup	1.3.6.1.4.1.9.9.758.7.2.3			Statistics object group.
ciscoTelepresenceExchangeSystemMIBStatusGroup	1.3.6.1.4.1.9.9.758.7.2.1			CTX System status object group.
CTX ctxAdminServersStatus	1.3.6.1.4.1.9.9.758.1.2.1	CtxHealthStates	read-only	This object specifies an overall system health status state for the cluster admin server nodes. This state is an indicator of the CTX System functional health in terms of the admin functions. The ctxAdminServersStatusChg notification provides real-time alerts for when this state changes. A ctxNotifyMessage will detail the reason why the state changed.
CTX ctxAllocActivePorts	1.3.6.1.4.1.9.9.758.1.3.2.1.1	CtxPorts	read-only	This object identifies the active in-use ports for the resource.
CTX ctxAllocAvailPorts	1.3.6.1.4.1.9.9.758.1.3.2.1.2	CtxPorts	read-only	This object identifies the available ports for the resource.
C32 ctxAllocFailures	1.3.6.1.4.1.9.9.758.1.3.2.1.3	Counter32	read-only	This object increments when there are not enough port resources available to process the requested allocation or if there is an error allocating the ports.
C32 ctxAllocOutOfPorts	1.3.6.1.4.1.9.9.758.1.3.2.1.4	Counter32	read-only	This object increments when there are not enough port resources available to process the requested allocation.
ctxAllocPeakHistory	1.3.6.1.4.1.9.9.758.1.3.4
CTX ctxAllocPoolActivePorts	1.3.6.1.4.1.9.9.758.1.3.3.1.2	CtxPorts	read-only	This object identifies the active in-use ports for the region.
C32 ctxAllocPoolAllocFailures	1.3.6.1.4.1.9.9.758.1.3.3.1.4	Counter32	read-only	This object increments when there are not enough port resources available to process the requested allocation or if there is an error allocating the port for the given region.
C32 ctxAllocPoolAllocOutOfPorts	1.3.6.1.4.1.9.9.758.1.3.3.1.5	Counter32	read-only	This object increments when there are not enough port resources available to process the requested allocation for the given region resource pool.
CTX ctxAllocPoolAvailPorts	1.3.6.1.4.1.9.9.758.1.3.3.1.3	CtxPorts	read-only	This object identifies the available ports for resources within the region.
ctxAllocStatsEntry	1.3.6.1.4.1.9.9.758.1.3.2.1		not-accessible	Each entry describes an individual resource and statistics for media port allocations. This table is indexed by the ctxResourceIndex. Only resources that require port allocations will have an entry in this table.
ctxAllocStatsTable	1.3.6.1.4.1.9.9.758.1.3.2		not-accessible	This table specifies the run-time scheduling port allocation statistics.
T/F ctxAuthFailureNotifyEnable	1.3.6.1.4.1.9.9.758.1.5.2.3	TruthValue	read-write	This object specifies if the authentication failure traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. The default setting for authentication failures is FALSE/disabled in order to prevent unnecessary event flooding. This object controls the generation of the following notifications: ciscoCTXSysUserAuthFailure
CTX ctxCallEnginesStatus	1.3.6.1.4.1.9.9.758.1.2.2	CtxHealthStates	read-only	This object specifies an overall system health status state for the cluster engine server nodes. This state is an indicator of the CTX System functional health in terms of the call processing engine functions. The ctxCallEnginesStatusChg notification provides real-time alerts for when this state changes. A ctxNotifyMessage will detail the reason why the state changed.
T/F ctxCallFailureNotifyEnable	1.3.6.1.4.1.9.9.758.1.5.2.6	TruthValue	read-write	This object specifies if the call failure traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the following notifications: ciscoCTXSysCallSetupFailure, ciscoCTXSysCallAbnormalDisconnect
T/F ctxClusterNodeAlarmNotifyEnable	1.3.6.1.4.1.9.9.758.1.5.2.4	TruthValue	read-write	This object specifies if the cluster node alarm traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the following notifications: ciscoCTXSysClusterNodeDown, ciscoCTXSysClusterNodeUp
STR ctxClusterNodeClusterName	1.3.6.1.4.1.9.9.758.1.1.5.1.7	DisplayString	read-only	This object specifies the cluster node cluster name as configured in the CTX System.
ctxClusterNodeEntry	1.3.6.1.4.1.9.9.758.1.1.5.1		not-accessible	Each entry describes a cluster node entry as configured in the CTX System.
STR ctxClusterNodeHostName	1.3.6.1.4.1.9.9.758.1.1.5.1.4	DisplayString	read-only	This object specifies the cluster node hostname as configured in the CTX System.
CTX ctxClusterNodeIndex	1.3.6.1.4.1.9.9.758.1.1.5.1.1	CtxIndex	not-accessible	Cluster node snmp instance configuration index.
IP ctxClusterNodeIPAddr	1.3.6.1.4.1.9.9.758.1.1.5.1.6	InetAddress	read-only	This object specifies the cluster node IP address as configured in the CTX System.
IPt ctxClusterNodeIPType	1.3.6.1.4.1.9.9.758.1.1.5.1.5	InetAddressType	read-only	This object specifies the cluster node IP address type as configured in the CTX System.
CTX ctxClusterNodeKey	1.3.6.1.4.1.9.9.758.1.1.5.1.2	CtxKeyId	read-only	This object specifies the cluster node ID key as generated by the CTX System when the cluster node entry was configured.
STR ctxClusterNodeName	1.3.6.1.4.1.9.9.758.1.1.5.1.3	DisplayString	read-only	This object specifies the cluster node name as configured in the CTX system.
CTX ctxClusterNodeOperState	1.3.6.1.4.1.9.9.758.1.1.5.1.9	CtxResourceOperState	read-only	This object specifies the operational state of the cluster node. The operational state is set by the CTX System based on configuration and proactive monitoring of the cluster node. See the textual convention CtxResourceOperState for a detail description of the various states.
ctxClusterNodeTable	1.3.6.1.4.1.9.9.758.1.1.5		not-accessible	This table specifies the configuration information for cluster nodes as they are configured in the CTX System. A cluster node is a server within the CTX System, such as admin server, call engine server, or database server.
CTX ctxClusterNodeType	1.3.6.1.4.1.9.9.758.1.1.5.1.8	CtxClusterNodeTypes	read-only	This object specifies the cluster node type as configured in the CTX System.
ctxConfigObjects	1.3.6.1.4.1.9.9.758.1.1
CTX ctxDatabaseServersStatus	1.3.6.1.4.1.9.9.758.1.2.3	CtxHealthStates	read-only	This object specifies an overall system health status state for the cluster database server nodes. This state is an indicator of the CTX System functional health in terms of the database server functions. The ctxDatabaseServersStatusChg notification provides real-time alerts for when this state changes. A ctxNotifyMessage will detail the reason why the state changed.
STR ctxErrorAlarmId	1.3.6.1.4.1.9.9.758.1.4.4.1.6	DisplayString	read-only	This object specifies the alarm ID for the event as generated by the CTX System. Alarm ID's are documented in the CTX System user guide.
STR ctxErrorAppName	1.3.6.1.4.1.9.9.758.1.4.4.1.5	DisplayString	read-only	This object specifies the application name for the message. AppNames are documented in the CTX System user guide.
STR ctxErrorAttrValStr	1.3.6.1.4.1.9.9.758.1.4.4.1.7	DisplayString	read-only	This object specifies an attribute value pair in the format of attr=value [attr=value ...]. This string is limited to 255 characters. If the attribute value string is larger than 255 characters, the string will be truncated to 254 characters and an '*' will be inserted as the 255th character as a way to indicate the message was truncated. Attributes and associated values are documented in the CTX System user guide.
ctxErrorHistoryEntry	1.3.6.1.4.1.9.9.758.1.4.4.1		not-accessible	An entry is an event that was generated by the CTX System. Events can be traps that were sent and other log messages.
T/F ctxErrorHistoryEventNotifyEnable	1.3.6.1.4.1.9.9.758.1.5.2.7	TruthValue	read-write	This object specifies if the error event history traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Notifications and other error logs are logged in the error history table. Enabling this may cause duplication for events that are in duplicate of other notifications. This may be the desired behavior of the management system. Use ctxErrorHistoryMaxSeverity to specify the maximum severity level to be logged and sent via a notification. Sending error history notifications are disabled by default. This object controls the generation of the following notifications: ciscoCTXSysErrorHistoryEvent
CTX ctxErrorHistoryLastIndex	1.3.6.1.4.1.9.9.758.1.4.3	CtxIndex	read-only	This object specifies the value of the ctxErrorIndex object corresponding to the last entry added into the table. The management entity can use this object to determine if a new entry has been added into the ctxErrorHistoryTable.
SYS ctxErrorHistoryMaxSeverity	1.3.6.1.4.1.9.9.758.1.4.2	SyslogSeverity	read-write	Defines the maximum severity of the event messages that the history table will contain. The default is notice(5), which can be changed by setting the object.
ctxErrorHistoryTable	1.3.6.1.4.1.9.9.758.1.4.4		not-accessible	This table contains a history of alarms and events generated by the CTX system. This table is a real-time history table of alarms and events for the CTX System. When the table reaches its capacity specified in ctxErrorHistoryTableSize, the agent will purge the oldest entry. The management entity can receive real-time events when an object is inserted into this table by configuring ctxErrorHistoryEventNotifyEnable to TRUE and receiving ctxErrorHistoryEvent notifications
U32 ctxErrorHistoryTableSize	1.3.6.1.4.1.9.9.758.1.4.1	Unsigned32	read-write	This object specifies the number of entries that the ctxErrorHistoryTable can contain. When the capacity of the ctxErrorHistoryTable is reached, the oldest entry in the table will be deleted in order to accommodate the new entry. A value of '0' disables the history table. The default value is set to 100 entries.
CTX ctxErrorIndex	1.3.6.1.4.1.9.9.758.1.4.4.1.1	CtxIndex	not-accessible	Error history snmp instance index.
CTX ctxErrorKey	1.3.6.1.4.1.9.9.758.1.4.4.1.2	CtxKeyId	read-only	This object specifies the error history key id. A empty string maybe used if the key is not present.
STR ctxErrorMessage	1.3.6.1.4.1.9.9.758.1.4.4.1.8	DisplayString	read-only	This object specifies the message text for the event. This string is limited to 255 characters. If the message string is larger than 255 characters, the string will be truncated to 254 characters and an '*' will be inserted as the 255th character as a way to indicate the message was truncated.
SYS ctxErrorSeverity	1.3.6.1.4.1.9.9.758.1.4.4.1.4	SyslogSeverity	read-only	This object specifies the severity for the given message.
TIM ctxErrorTimeStamp	1.3.6.1.4.1.9.9.758.1.4.4.1.3	TimeStamp	read-only	This object indicates the timestamp when the message or the notification is generated by the CTX system. The timestamp is UTC.
ctxEventHistory	1.3.6.1.4.1.9.9.758.1.4
T/F ctxLicenseAlarmNotifyEnable	1.3.6.1.4.1.9.9.758.1.5.2.2	TruthValue	read-write	This object specifies if the license alarm traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the following notifications: ciscoCTXSysLicenseFailure
ctxMediaCapacityConfigEntry	1.3.6.1.4.1.9.9.758.1.1.4.3.1		not-accessible	Each entry describes the media capacity attributes for a resource as configured in the CTX System. As described in ctxResourceTable description, this table is indexed by the ctxResourceIndex. Only entries that have media capacity attributes will have an entry in this table.
ctxMediaCapacityConfigTable	1.3.6.1.4.1.9.9.758.1.1.4.3		not-accessible	This table specifies the media capacity configuration attributes for a resource. Only resources that have media capacity attributes will have an entry in this table.
T/F ctxMediaCapacityLargeMeeting	1.3.6.1.4.1.9.9.758.1.1.4.3.1.2	TruthValue	read-only	This object specifies the large meeting reservation allowed option for the resource as configured in the CTX System.
CTX ctxMediaCapacityMaxPorts	1.3.6.1.4.1.9.9.758.1.1.4.3.1.1	CtxPorts	read-only	This object specifies the maximum port capacity for the resource as configured in the CTX System.
ctxMeetingConfigEntry	1.3.6.1.4.1.9.9.758.1.1.4.4.1		not-accessible	Each entry describes the meeting attributes for a resource as configured in the CTX System. As described in ctxResourceTable description, this table is indexed by the ctxResourceIndex. Only entries that have meeting attributes will have an entry in this table.
STR ctxMeetingConfigInterOpMaxId	1.3.6.1.4.1.9.9.758.1.1.4.4.1.4	DisplayString	read-only	This object specifies the vendor specific maximum interOp meeting ID as configured in the CTX System.
STR ctxMeetingConfigInterOpMinId	1.3.6.1.4.1.9.9.758.1.1.4.4.1.3	DisplayString	read-only	This object specifies the vendor specific minimum interOp meeting ID as configured in the CTX System.
STR ctxMeetingConfigStaticMaxId	1.3.6.1.4.1.9.9.758.1.1.4.4.1.2	DisplayString	read-only	This object specifies the vendor specific maximum static meeting ID as configured in the CTX System.
STR ctxMeetingConfigStaticMinId	1.3.6.1.4.1.9.9.758.1.1.4.4.1.1	DisplayString	read-only	This object specifies the vendor specific minimum static meeting ID as configured in the CTX System.
ctxMeetingConfigTable	1.3.6.1.4.1.9.9.758.1.1.4.4		not-accessible	This table specifies the meeting configuration attributes for a resource. Only resources that have meeting attributes will have an entry in this table.
ctxNotifyConfigObjects	1.3.6.1.4.1.9.9.758.1.5.2
STR ctxNotifyMessage	1.3.6.1.4.1.9.9.758.1.5.1	DisplayString	accessible-for-notify	This object specifies a message text for the notification that is sent. This message will indicate a short description detailing the cause for the trap. This is intended as value added information for operational support staff, such as value added information in a ticket that is generated for this trap. Event and trap de-duplication systems should ignore this varbind as this entry will vary. De-duplication should be performed on the other varbinds and should exclude both ctxNotifyMesssage and ctxNotifyState.
ctxNotifyObjects	1.3.6.1.4.1.9.9.758.1.5
OCT ctxOrganizationDescr	1.3.6.1.4.1.9.9.758.1.1.3.1.4	OCTET STRING	read-only	This object specifies the organization description as configured in the CTX System.
T/F ctxOrganizationDirectDial	1.3.6.1.4.1.9.9.758.1.1.3.1.6	TruthValue	read-only	This object specifies the organization direct dial enabled flag as configured in the CTX System. If direct dial calls are allowed, this value will be TRUE. If direct dial calls are not allowed, this value will be FALSE.
ctxOrganizationEntry	1.3.6.1.4.1.9.9.758.1.1.3.1		not-accessible	Each entry represents an organization configuration entry as configured in the CTX system.
CTX ctxOrganizationIndex	1.3.6.1.4.1.9.9.758.1.1.3.1.1	CtxIndex	not-accessible	Organization snmp instance configuration index.
CTX ctxOrganizationKey	1.3.6.1.4.1.9.9.758.1.1.3.1.2	CtxKeyId	read-only	This object specifies the organization ID key as generated by the CTX System when the organization entry was configured.
CTX ctxOrganizationMaxPorts	1.3.6.1.4.1.9.9.758.1.1.3.1.5	CtxPorts	read-only	This object specifies the organization maximum ports for scheduled meetings. The value of 0 indicates undefined.
STR ctxOrganizationName	1.3.6.1.4.1.9.9.758.1.1.3.1.3	DisplayString	read-only	This object specifies the organization name as configured in the CTX System.
CTX ctxOrganizationServiceProviderKeyRef1	1.3.6.1.4.1.9.9.758.1.1.3.1.7	CtxKeyId	read-only	This object references the ctxServiceProviderKey object from the ctxServiceProviderEntry table. This key matches the service provider key. This key provides an association reference to the service provider entry that is associated to this region entry. This object maybe null or empty if no reference is provided. See MIB description under 'Configuration Tables and Linking' for a detailed example.
ctxOrganizationTable	1.3.6.1.4.1.9.9.758.1.1.3		not-accessible	This table specifies the configuration information for an organization as they are configured in the CTX System. Organization entries provide a logical grouping of customer endpoints and resources.
ctxPeakHistAllocEntry	1.3.6.1.4.1.9.9.758.1.3.4.3.1		not-accessible	Each entry describes a single peak time interval per resource. This table is indexed by the ctxResourceIndex and ctxPeakHistAllocIntIndex. Only resources that have port allocations will have an entry in this table.
I32 ctxPeakHistAllocIntIndex	1.3.6.1.4.1.9.9.758.1.3.4.3.1.1	Integer32	not-accessible	A monotonically increasing integer which is incremented for every interval. Based on the allowed interval length the object will not wrap for life of Device. The intent of this object is to allow network management applications a mechanism that allows them to collect only those newly added interval. The network management application only needs to save the index of the last received interval and use it as a starting point when data is next collected from this table.
ctxPeakHistAllocPoolEntry	1.3.6.1.4.1.9.9.758.1.3.4.4.1		not-accessible	Each entry describes a single peak time interval per region. This table is indexed by the ctxRegionIndex and ctxPeakHistAllocPoolIntIndex.
I32 ctxPeakHistAllocPoolIntIndex	1.3.6.1.4.1.9.9.758.1.3.4.4.1.1	Integer32	not-accessible	A monotonically increasing integer which is incremented for every interval. Based on the allowed interval length the object will not wrap for life of Device. The intent of this object is to allow network management applications a mechanism that allows them to collect only those newly added interval. The network management application only needs to save the index of the last received interval and use it as a starting point when data is next collected from this table.
CTX ctxPeakHistAllocPoolPorts	1.3.6.1.4.1.9.9.758.1.3.4.4.1.3	CtxPorts	read-only	This object specifies the peak ports for the given interval. This is the maximum port count during the interval time period.
ctxPeakHistAllocPoolTable	1.3.6.1.4.1.9.9.758.1.3.4.4		not-accessible	This table specifies the run-time peak port allocation statistics for all resources within a region. This table contains peak port allocations per region for ctxHistMaxIntervals. The management entity can use this table to monitor the peak port allocations per interval. Setting ctxPeakHistMaxIntervals to 0 will disable this table and clear all entries in table.
TIM ctxPeakHistAllocPoolTS	1.3.6.1.4.1.9.9.758.1.3.4.4.1.2	TimeStamp	read-only	This object specifies the start timestamp of the interval. The interval end time is this time plus the ctxPeakHistIntTime.
CTX ctxPeakHistAllocPorts	1.3.6.1.4.1.9.9.758.1.3.4.3.1.3	CtxPorts	read-only	This object specifies the peak ports for the given interval. This is the maximum port count during the interval time period.
ctxPeakHistAllocTable	1.3.6.1.4.1.9.9.758.1.3.4.3		not-accessible	This table specifies the run-time peak statistics for resource port allocations. This table contains peak port allocations per resource for ctxHistMaxIntervals. The management entity can use this table to monitor the peak port allocations per interval. Setting ctxPeakHistMaxIntervals to 0 will disable this table and clear all entries in table.
TIM ctxPeakHistAllocTS	1.3.6.1.4.1.9.9.758.1.3.4.3.1.2	TimeStamp	read-only	This object specifies the start timestamp of the interval. The interval end time is this time plus the ctxPeakHistIntTime.
U32 ctxPeakHistIntTime	1.3.6.1.4.1.9.9.758.1.3.4.2	Unsigned32	read-write	This object specifies the time interval in minutes. Default is 15 minutes. The minimum interval time is 1 and the maximum is 1440 minutes. Changing this value will reset and clear both ctxPeakHistAllocTable and ctxPeakHistAllocPoolTable table entries.
U32 ctxPeakHistMaxIntervals	1.3.6.1.4.1.9.9.758.1.3.4.1	Unsigned32	read-write	This object specifies the number of time intervals kept in the history tables ctxPeakHistAllocTable and ctxPeakHistAllocPoolTable. The default is 96 intervals. 96 intervals at the ctxPeakHistIntTime default of 15 minutes stores peak values for 24 hours. A value of 0 will disable peak history tables from collecting data. The minimum value is 5 with a maximum of 1440. Changing this value will reset and clear both ctxPeakHistAllocTable and ctxPeakHistAllocPoolTable table entries.
C32 ctxRegionCallSetupFailures	1.3.6.1.4.1.9.9.758.1.3.3.1.1	Counter32	read-only	This object specifies a counter that increments every time a call fails to be setup correctly in this region. Mis-dialed numbers are excluded and not considered a failure.
OCT ctxRegionDescr	1.3.6.1.4.1.9.9.758.1.1.2.1.4	OCTET STRING	read-only	This object specifies the region description as configured in the CTX System.
ctxRegionEntry	1.3.6.1.4.1.9.9.758.1.1.2.1		not-accessible	Each entry describes a region entry as configured in the CTX System.
CTX ctxRegionIndex	1.3.6.1.4.1.9.9.758.1.1.2.1.1	CtxIndex	not-accessible	Region snmp instance configuration index.
CTX ctxRegionKey	1.3.6.1.4.1.9.9.758.1.1.2.1.2	CtxKeyId	read-only	This object specifies the region entry ID key as generated by the CTX System when the entry entry was configured.
STR ctxRegionName	1.3.6.1.4.1.9.9.758.1.1.2.1.3	DisplayString	read-only	This object specifies the region name as configured in the CTX System.
CTX ctxRegionServiceProviderKeyRef1	1.3.6.1.4.1.9.9.758.1.1.2.1.5	CtxKeyId	read-only	This object references the ctxServiceProviderKey object from the ctxServiceProviderEntry table. This key matches the service provider key. This key provides an association reference to the service provider entry that is associated to this region entry. This object maybe null or empty if no reference is provided. See MIB description under 'Configuration Tables and Linking' for a detailed example.
ctxRegionStatsEntry	1.3.6.1.4.1.9.9.758.1.3.3.1		not-accessible	Each entry describes statistics for a region. This table is indexed by the ctxRegionIndex.
ctxRegionStatsTable	1.3.6.1.4.1.9.9.758.1.3.3		not-accessible	This table specifies the run-time statistics for regions for scheduling port allocations and call setup failures. This table is similar to the ctxAllocStatsTable table, except this table provides statistics per region for all resources.
ctxRegionTable	1.3.6.1.4.1.9.9.758.1.1.2		not-accessible	This table specifies the configuration information for regions as they are configured in the CTX System. A region is defined as a set of 'like' resources in terms of network latency, jitter, quality of service, etc. Normally a region is a geographic area such as Americas, Europe, or Asia Pacific, but a region can be a smaller set of like resources such as East and West regions.
T/F ctxResourceAlarmNotifyEnable	1.3.6.1.4.1.9.9.758.1.5.2.5	TruthValue	read-write	This object specifies if the resource alarm traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the following notifications: ciscoCTXSysResourceDown, ciscoCTXSysResourceUp, ciscoCTXSysResourceAllocFailure
C32 ctxResourceCallSetupFailures	1.3.6.1.4.1.9.9.758.1.3.1.1.4	Counter32	read-only	This object specifies a counter that increments every time a call fails to be setup correctly to this resource. Miss-dialed numbers are excluded and not considered a failure.
OCT ctxResourceDescr	1.3.6.1.4.1.9.9.758.1.1.4.1.1.4	OCTET STRING	read-only	This object specifies the resource configuration as configured in the CTX System.
CTX ctxResourceDeviceType	1.3.6.1.4.1.9.9.758.1.1.4.1.1.7	CtxResourceType	read-only	This object specifies the resource device type as configured in the CTX System.
ctxResourceEntry	1.3.6.1.4.1.9.9.758.1.1.4.1.1		not-accessible	Each entry represents a resource configuration entry as configured in the CTX system.
CTX ctxResourceIndex	1.3.6.1.4.1.9.9.758.1.1.4.1.1.1	CtxIndex	not-accessible	Resource snmp instance configuration index.
CTX ctxResourceKey	1.3.6.1.4.1.9.9.758.1.1.4.1.1.2	CtxKeyId	read-only	This object specifies the resource ID key as generated by the CTX System when the resource entry was configured. This key is a globally unique across all configuration tables and entries. This key will persist upon restart and reboot.
IP ctxResourceMgmtIPAddr	1.3.6.1.4.1.9.9.758.1.1.4.1.1.6	InetAddress	read-only	This object specifies the management IP for the resource as configured in the CTX System. This IP address is used for provisioning, monitoring, and resource probes. The IP address 0.0.0.0 will be used if the resource does not have a management IP address configured.
IPt ctxResourceMgmtIPType	1.3.6.1.4.1.9.9.758.1.1.4.1.1.5	InetAddressType	read-only	This object specifies the management IP address type for the resource as configured in the CTX System.
STR ctxResourceName	1.3.6.1.4.1.9.9.758.1.1.4.1.1.3	DisplayString	read-only	This object specifies the resource name as configured in the CTX System.
ctxResourceObjects	1.3.6.1.4.1.9.9.758.1.1.4
CTX ctxResourceOperState	1.3.6.1.4.1.9.9.758.1.3.1.1.1	CtxResourceOperState	read-only	This object specifies the operational state of the resource. The operational state is set by the CTX System based on configuration and proactive monitoring of the resource. See the textual convention CtxResourceOperState for a detail description of the various states.
CTX ctxResourceRegionKeyRef1	1.3.6.1.4.1.9.9.758.1.1.4.1.1.8	CtxKeyId	read-only	This object references the ctxRegionKey object from the ctxRegionEntry table. This key matches the region key. This key provides an association reference to the region entry that is associated to this resource entry. This object maybe null or empty if no reference is provided. See MIB description under 'Configuration Tables and Linking' for a detailed example.
ctxResourceStatsEntry	1.3.6.1.4.1.9.9.758.1.3.1.1		not-accessible	Each entry describes an individual resource and statistics for it. This table is indexed by the ctxResourceIndex. All resources will have an entry in this table to define common resource statistics, such as operational state.
ctxResourceStatsTable	1.3.6.1.4.1.9.9.758.1.3.1		not-accessible	This table specifies the run-time resource statistics.
CTX ctxResourceStatus	1.3.6.1.4.1.9.9.758.1.2.4	CtxHealthStates	read-only	This object specifies an overall system health status state for the resources configured. This state is an indicator of the CTX System functional health in terms of the resource dependencies. The ctxResourceStatusChg notification provides real-time alerts for when this state changes. A ctxNotifyMessage will detail the reason why the state changed.
ctxResourceTable	1.3.6.1.4.1.9.9.758.1.1.4.1		not-accessible	This table specifies the configuration information for resources as they are configured in the CTX System. A resource is server or network device that the CTX System includes in configuration to provide call signaling, media services, scheduling, or other function. A resource may have additional configuration items, such as ctxSipConfigTable. Each of the other ctxResourceObjects tables are indexed by this resource entry. If a resource has SIP configurations, there will be a entry in the ctxSipConfigEntry indexed by this ctxResourceIndex. \|- Service Providers - Logical grouping \|-- Regions - Logical grouping \| \| \| \|--- Resources - General configs for resources \| \| that are common to all resources \| \| \| \|--- SIP Configs - SIP configurations such as \| \| SIP IP, port, and protocol \| \| \| \|--- Meeting Configs - Meeting configurations \| \| such as Min/Max meeting ID's \| \| \| \|--- Capacity Configs - Media port counts, \| \| large meeting support, etc.
C32 ctxResourceUnavailDuration	1.3.6.1.4.1.9.9.758.1.3.1.1.3	Counter32	read-only	Defines the total time in seconds that the resource was in either the failed or unreachable states. This counter keeps track of time in seconds on how much the resource stays in the failed and unreachable states. The duration is accumulative from SNMP start time and will reset to zero when the snmp agent is restarted.
C32 ctxResourceUnavailTransEx	1.3.6.1.4.1.9.9.758.1.3.1.1.2	Counter32	read-only	This object specifies a counter that increments when the resource transitions to unreachable or failed state from another state. The management entity can use this to track the operational stability of the resource.
OCT ctxServiceProviderDescr	1.3.6.1.4.1.9.9.758.1.1.1.1.4	OCTET STRING	read-only	This object specifies the service provider description as configured in the CTX System.
ctxServiceProviderEntry	1.3.6.1.4.1.9.9.758.1.1.1.1		not-accessible	Each entry describes a service provider entry as configured in the CTX System.
STR ctxServiceProviderHDNumber	1.3.6.1.4.1.9.9.758.1.1.1.1.5	DisplayString	read-only	This object specifies the service provider help desk number. This number is normally in the e.164 format.
CTX ctxServiceProviderIndex	1.3.6.1.4.1.9.9.758.1.1.1.1.1	CtxIndex	not-accessible	Service provider snmp instance configuration index.
CTX ctxServiceProviderKey	1.3.6.1.4.1.9.9.758.1.1.1.1.2	CtxKeyId	read-only	This object specifies the service provider ID key.
STR ctxServiceProviderName	1.3.6.1.4.1.9.9.758.1.1.1.1.3	DisplayString	read-only	This object specifies the service provider name as configured in the CTX System.
ctxServiceProviderTable	1.3.6.1.4.1.9.9.758.1.1.1		not-accessible	This table specifies the configuration information for service providers as they are configured in the CTX System. Service provider entries provide a logical grouping of regions, organizations, and resources.
ctxSipConfigEntry	1.3.6.1.4.1.9.9.758.1.1.4.2.1		not-accessible	Each entry describes the SIP attributes for a resource as configured in the CTX System. As described in ctxResourceTable description, this table is indexed by the ctxResourceIndex. Only entries that have SIP attributes will have an entry in this table.
ctxSipConfigTable	1.3.6.1.4.1.9.9.758.1.1.4.2		not-accessible	This table specifies the SIP configuration attributes for a resource. Only resources that have SIP attributes will have an entry in this table.
IP ctxSipIpAddr	1.3.6.1.4.1.9.9.758.1.1.4.2.1.2	InetAddress	read-only	This object specifies the SIP signaling IP for the resource as configured in the CTX System. This IP address is used for signaling and for SIP OPTION PING resource probes.
IPt ctxSipIpType	1.3.6.1.4.1.9.9.758.1.1.4.2.1.1	InetAddressType	read-only	This object specifies the SIP IP address type for the resource as configured in the CTX System.
CIS ctxSipPort	1.3.6.1.4.1.9.9.758.1.1.4.2.1.3	CiscoPort	read-only	This object specifies the SIP port for the resource as configured in the CTX System.
CTX ctxSipTransportProto	1.3.6.1.4.1.9.9.758.1.1.4.2.1.4	CtxSIPProtocolType	read-only	This object specifies the SIP transport protocol type as configured in the CTX System.
ctxStatisticsObjects	1.3.6.1.4.1.9.9.758.1.3
T/F ctxStatusChangeNotifyEnable	1.3.6.1.4.1.9.9.758.1.5.2.1	TruthValue	read-write	This object specifies if the status change traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the following notifications: ciscoCTXSysAdminServersStatusChg, ciscoCTXSysDatabaseServersStatusChg, ciscoCTXSysCallEnginesStatusChg, ciscoCTXSysResourceStatusChg, ciscoCTXSysSystemConfigStatusChg, ciscoCTXSysSystemBackupStatusChg
CTX ctxSystemBackupStatus	1.3.6.1.4.1.9.9.758.1.2.6	CtxHealthStates	read-only	This object specifies an overall system health status state for the system backups. This state is an indicator of the CTX System functional health in terms of the overall system backups. The ctxBackupStatusChg notification provides real-time alerts for when this state changes. A ctxNotifyMessage will detail the reason why the state changed.
CTX ctxSystemConfigStatus	1.3.6.1.4.1.9.9.758.1.2.5	CtxHealthStates	read-only	This object specifies an overall system health status state for the system configuration. This state is an indicator of the CTX System functional health in terms of the overall configuration. The ctxSystemConfigStatusChg notification provides real-time alerts for when this state changes. A ctxNotifyMessage will detail the reason why the state changed.
ctxSystemStatusObjects	1.3.6.1.4.1.9.9.758.1.2

RFC description

Cisco MIB providing configuration, status, statistics, and alarm notifications for Cisco TelePresence Exchange System video conferencing server clusters.

Start monitoring Cisco TelePresence Exchange System (CTX) platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB