| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoDpvmMIB | 1.3.6.1.4.1.9.9.421 | | | The MIB module for the management of the
Dynamic Port Vsan Membership (DPVM) module.
DPVM provides the ability to assign (virtual
storage area network) VSAN IDs dynamically
to switch ports based on the device logging
in on the port. The logging-in device can
be identified by its port World Wide Name (pWWN)
and/or its node World Wide Name (nWWN). |
| ciscoDpvmMIBNotifs | 1.3.6.1.4.1.9.9.421.0 | | | |
| ciscoDpvmMIBObjects | 1.3.6.1.4.1.9.9.421.1 | | | |
| cdpvmConfiguration | 1.3.6.1.4.1.9.9.421.1.1 | | | |
| U32 cdpvmNextAvailIndex | 1.3.6.1.4.1.9.9.421.1.1.1 | Unsigned32 | read-only | This object contains an appropriate value
to be used for cdpvmIndex when creating entries
in the cdpvmTable. The value 0 indicates that all
entries are assigned.
A management application should read
this object, get the (non-zero) value and use
same for creating an entry in the cdpvmTable.
After each retrieval and use, the agent should modify
the value to the next unassigned index.
After a manager retrieves a value the agent will
determine through its local policy when this
index value will be made available for reuse. A
suggested mechanism is to make an index available
when the corresponding entry is deleted. |
| cdpvmTable | 1.3.6.1.4.1.9.9.421.1.1.2 | | not-accessible | This table contains the set of all valid
bindings of devices to VSANs configured on
the local device. A valid binding consists
of a pWWN/nWWN bound to a VSAN. If a device
is bound to a VSAN, then when that device
logs in through a port on the local device,
that port is assigned the configured VSAN.
Such a VSAN is called a 'dynamic' VSAN.
The set of valid bindings configured in this
table should be activated by means of the
cdpvmActivate object. When activated, these
bindings are enforced and all subsequent logins
will be subject to these bindings. |
| cdpvmEntry | 1.3.6.1.4.1.9.9.421.1.1.2.1 | | not-accessible | An entry (conceptual row) in this table. Each
entry contains the mapping between a device
and its dynamic VSAN. |
| U32 cdpvmIndex | 1.3.6.1.4.1.9.9.421.1.1.2.1.1 | Unsigned32 | not-accessible | Identifies a binding between a device and its
dynamic VSAN. |
| CDP cdpvmLoginDevType | 1.3.6.1.4.1.9.9.421.1.1.2.1.2 | CdpvmDevType | read-create | Specifies the type of the corresponding
instance of cdpvmLoginDev object. |
| FCN cdpvmLoginDev | 1.3.6.1.4.1.9.9.421.1.1.2.1.3 | FcNameId | read-create | Represents the logging-in device.
If the value of the corresponding instance of
cdpvmLoginDevType is 'pwwn', then this object
contains a pWWN.
If the value of the corresponding instance of
cdpvmLoginDevType is 'nwwn', then this object
contains a nWWN.
This object MUST be set to a valid value
before or concurrently with setting the
corresponding instance of cdpvmRowStatus to
'active'.
The agent should not allow creation of 2 entries
in this table with same values for cdpvmLoginDev
and cdpvmLoginDevVsan. |
| VSA cdpvmLoginDevVsan | 1.3.6.1.4.1.9.9.421.1.1.2.1.4 | VsanIndex | read-create | Represents the VSAN to be associated to the
port on the local device on which the device
represented by cdpvmLoginDev logs in. |
| ROW cdpvmRowStatus | 1.3.6.1.4.1.9.9.421.1.1.2.1.5 | RowStatus | read-create | The status of this conceptual row.
Before setting this object to 'active', the
cdpvmLoginDev object MUST be set to a valid
value.
Only cdpvmLoginDevVsan object can be modified
when the value of this object is 'active'. |
| CPS cdpvmActivate | 1.3.6.1.4.1.9.9.421.1.1.3 | CpsmDbActivate | read-write | This object helps in activating the set
of bindings in the cdpvmTable.
Setting this object to 'activate(1)' will
result in the valid bindings present in
cdpvmTable being activated and copied
to the cpdvmEnfTable.
By default auto learn will be turned 'on'
after activation. Before activation is
attempted, it should be turned 'off'.
Setting this object to 'forceActivate(3)', will
result in forced activation, even if there are
errors during activation and the activated
bindings will be copied to the cdpvmEnfTable.
Setting this object to 'deactivate(5)', will
result in deactivation of currently activated
valid bindings (if any).
Currently active entries (if any), which
would have been present in the
cdpvmEnfTable, will be removed.
Setting this object to 'activateWithAutoLearnOff(2)'
and 'forceActivateWithAutoLearnOff(4)' is not
allowed.
Setting this object to 'noop(6)', results in
no action.
The value of this object when read is always
'noop(6)'.
Activation will not be allowed if auto-learn is
enabled. |
| CPS cdpvmActivateResult | 1.3.6.1.4.1.9.9.421.1.1.4 | CpsmActivateResult | read-only | This object indicates the outcome of the
activation. |
| T/F cdpvmAutoLearn | 1.3.6.1.4.1.9.9.421.1.1.5 | TruthValue | read-write | This object helps to 'learn' the configuration
of devices logged into the local device on all
its ports and the VSANs to which they are
associated. This information will be
populated in the the enforced binding
table (cdpvmEnfTable).
This mechanism of 'learning' the configuration of
devices and their VSAN association over a period of
time and populating the configuration
is a convenience mechanism for users.
If this object is set to 'true(1)' all subsequent
logins and their VSAN association will be populated
in the enforced binding database, provided it is
not in conflict with existing enforced bindings.
When this object is set to 'false(2)', the
mechanism of learning is stopped. The learned
entries will however be in the enforced
binding database. |
| INT cdpvmCopyEnfToConfig | 1.3.6.1.4.1.9.9.421.1.1.6 | INTEGER | read-write | This object when set to 'copy(1)', results
in the active (enforced) binding database
to be copied on to the configuration
binding database. Note that
the learned entries are also copied.
No action is taken if this object is set to
'noop(2)'.
The value of this object when read is
always 'noop'. |
| cdpvmEnfTable | 1.3.6.1.4.1.9.9.421.1.1.7 | | not-accessible | This table contains information on all
currently enforced bindings on the local
device. The enforced set of bindings is the
set of valid bindings copied from the
configuration binding database
(cdpvmTable) at the time they were
activated. These entries cannot be modified.
The learnt entries are also a part of this
table. Entries can get into this table or be
deleted from this table only by means of
explicit activation/deactivation.
Note that this table will be empty when no
valid bindings have been activated. |
| cdpvmEnfEntry | 1.3.6.1.4.1.9.9.421.1.1.7.1 | | not-accessible | An entry (conceptual row) in this table. |
| U32 cdpvmEnfIndex | 1.3.6.1.4.1.9.9.421.1.1.7.1.1 | Unsigned32 | not-accessible | The index of this entry. |
| CDP cdpvmEnfLoginDevType | 1.3.6.1.4.1.9.9.421.1.1.7.1.2 | CdpvmDevType | read-only | Specifies the type of the corresponding
instance of cdpvmEnfLoginDev. |
| FCN cdpvmEnfLoginDev | 1.3.6.1.4.1.9.9.421.1.1.7.1.3 | FcNameId | read-only | This object represents the logging in
device address. This object was copied
from the cdpvmLoginDev object in the
cdpvmTable at the time when the
currently active bindings were activated. |
| VSA cdpvmEnfLoginDevVsan | 1.3.6.1.4.1.9.9.421.1.1.7.1.4 | VsanIndex | read-only | This object represents the VSAN of the
port on the local device thru' which the
device represented by cdpvmEnfLoginDev
logs in. This object was copied
from the cdpvmLoginDevVsan object in the
cdpvmTable at the time when the
currently active bindings were activated |
| T/F cdpvmEnfIsLearnt | 1.3.6.1.4.1.9.9.421.1.1.7.1.5 | TruthValue | read-only | This object indicates if this is a learnt entry
or not.
If the value of this object is 'true', then it is
a learnt entry.
If the value of this object is 'false', then it
is not. |
| cdpvmDynPortsTable | 1.3.6.1.4.1.9.9.421.1.1.8 | | not-accessible | This table contains the set of all ports
that are operating with a dynamic VSAN on
the local device. |
| cdpvmDynPortsEntry | 1.3.6.1.4.1.9.9.421.1.1.8.1 | | not-accessible | An entry (conceptual row) in this table. |
| VSA cdpvmDynPortVsan | 1.3.6.1.4.1.9.9.421.1.1.8.1.1 | VsanIndex | read-only | The 'dynamic' VSAN of this port on the local
device. |
| FCN cdpvmDynPortDevPwwn | 1.3.6.1.4.1.9.9.421.1.1.8.1.2 | FcNameId | read-only | The pWWN of the device currently logged-in
through this port on the local device. |
| FCN cdpvmDynPortDevNwwn | 1.3.6.1.4.1.9.9.421.1.1.8.1.3 | FcNameId | read-only | The nWWN of the device currently logged-in thru'
this port on the local device. |
| CPS cdpvmDiffConfig | 1.3.6.1.4.1.9.9.421.1.1.9 | CpsmDiffDb | read-write | The config database represented by cdpvmTable
and the enforced database represented by
cdpvmEnfTable can be compared to list out the
differences.
This object specifies the reference database
for the comparison.
This object when set to 'configDb(1)', compares
the configuration database (cdpvmTable) with
respect to the enforced database (cdpvmEnfTable).
So, the enforced database will be the reference
database and the results of comparison operation
will be with respect to the enforced database.
This object when set to 'activeDb(2)', compares
the enforced database with respect to the
configuration database. So, the configured database
will be the reference database and the results of
comparison operation will be with respect to the
configuration database.
No action will be taken if this object is set
to 'noop(3)'.
The value of this object when read is always
'noop(3)'. |
| cdpvmDiffTable | 1.3.6.1.4.1.9.9.421.1.1.10 | | not-accessible | This table contains the result of the compare
operation configured by means of the
cdpvmDiffConfig object. |
| cdpvmDiffEntry | 1.3.6.1.4.1.9.9.421.1.1.10.1 | | not-accessible | An entry (conceptual row) in this table. |
| U32 cdpvmDiffIndex | 1.3.6.1.4.1.9.9.421.1.1.10.1.1 | Unsigned32 | not-accessible | The index of this entry. |
| CPS cdpvmDiffReason | 1.3.6.1.4.1.9.9.421.1.1.10.1.2 | CpsmDiffReason | read-only | This object indicates the reason for the
difference between the databases being
compared, for this entry. |
| CDP cdpvmDiffLoginDevType | 1.3.6.1.4.1.9.9.421.1.1.10.1.3 | CdpvmDevType | read-only | Specifies the type of the corresponding
instance of cdpvmDiffLoginDev object. |
| FCN cdpvmDiffLoginDev | 1.3.6.1.4.1.9.9.421.1.1.10.1.4 | FcNameId | read-only | This object represents the logging-in
device address. This object was copied
from either the cdpvmLoginDev object in
the cdpvmTable or from cdpvmEnfLoginDev
object in the cdpvmEnfTable at the time
when the comparison was done. |
| VSA cdpvmDiffLoginDevVsan | 1.3.6.1.4.1.9.9.421.1.1.10.1.5 | VsanIndex | read-only | This object represents the VSAN of the port
on the local device thru' which the device
represented by the corresponding instance of
cdpvmDiffLoginDev object, logged-in. It was
copied from either the cdpvmLoginDevVsan
object in the cdpvmTable or from
cdpvmEnfLoginDevVsan object in the
cdpvmEnfTable at the time when the comparison
was done. |
| INT cdpvmClearAutoLearn | 1.3.6.1.4.1.9.9.421.1.1.11 | INTEGER | read-write | This object assists in clearing the
auto-learnt entries.
Setting this object to 'clear(1)' will result
in all auto-learnt entries being cleared.
Setting this object to 'clearOnWwn(2)' will
result in a particular entry represented by
cdpvmClearAutoLearnWwn object being cleared.
Before setting this object to 'clearOnWwn(2)',
the cpdvmClearAutoLearnWwn object should be
set to the pWWN that is to be cleared.
Setting this object to 'noop(3)', will result
in no action being taken.
The value of this object when read is always
'noop'. |
| FCN cdpvmClearAutoLearnWwn | 1.3.6.1.4.1.9.9.421.1.1.12 | FcNameIdOrZero | read-write | Represents the port WWN (pWWN) to be used for
clearing its corresponding auto-learnt entry. |
| T/F cdpvmActivationState | 1.3.6.1.4.1.9.9.421.1.1.13 | TruthValue | read-only | This object indicates the state of activation.
If the value of this object is 'true', then
an activation has been attempted as the most
recent operation.
If the value of this object is 'false', then
an activation has not been attempted as the
most recent operation. |
| ciscoDpvmMIBConform | 1.3.6.1.4.1.9.9.421.2 | | | |
| ciscoDpvmMIBCompliances | 1.3.6.1.4.1.9.9.421.2.1 | | | |
| ciscoDpvmMIBCompliance | 1.3.6.1.4.1.9.9.421.2.1.1 | | | The compliance statement for entities which
implement the Dynamic Port VSAN Membership
Manager. |
| ciscoDpvmMIBGroups | 1.3.6.1.4.1.9.9.421.2.2 | | | |
| ciscoDpvmConfigGroup | 1.3.6.1.4.1.9.9.421.2.2.1 | | | A set of objects for configuration of
DPVM bindings. |
| ciscoDpvmEnforcedGroup | 1.3.6.1.4.1.9.9.421.2.2.2 | | | A set of objects for displaying enforced
DPVM bindings. |
| ciscoDpvmAutoLearnGroup | 1.3.6.1.4.1.9.9.421.2.2.3 | | | A set of object(s) for configuring auto-learn
of DPVM bindings. |
| ciscoDpvmDiffGroup | 1.3.6.1.4.1.9.9.421.2.2.4 | | | A set of objects for configuring and displaying
database compare operations. |
