All MIBs › CISCO-PROCESS-MIB
Organization: Cisco Systems, Inc.
Last Updated: 2010-05-06
Category: Cisco Devices, Device Management, Hardware and Environment
Description: Monitors CPU process utilization, memory consumption, and runtime statistics on Cisco routing platforms.
IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring CISCO-PROCESS-MIB with a free 30-day trial of IPNetwork Monitor.
What Is CISCO-PROCESS-MIB?
CISCO-PROCESS-MIB is a well-known Cisco-specific MIB (not a formal IETF RFC, but widely treated as a de facto standard for Cisco CPU monitoring) that reports CPU and process-level utilization and memory statistics across Cisco IOS/IOS-XE platforms. Its cpmCPUTotalTable exposes per-CPU utilization at 5-second/1-minute/5-minute intervals (cpmCPUTotal5secRev, cpmCPUTotal1minRev, cpmCPUTotal5minRev), 1/5/15-minute load averages (cpmCPULoadAvg1min/5min/15min), and detailed memory accounting (cpmCPUMemoryUsed, cpmCPUMemoryFree, cpmCPUMemoryKernelReserved, cpmCPUMemoryLowest, cpmCPUMemoryCommitted, with 64-bit HC variants for overflow-safe polling); the cpmProcessTable and cpmProcessExtRevTable report per-process CPU utilization, memory allocated/freed, runtime, respawn counts, and process type (POSIX/IOS/other), while cpmCPUThresholdTable and cpmCPUHistoryTable support configurable rising/falling CPU thresholds with notifications and historical utilization snapshots. This is one of the most heavily polled Cisco MIBs for capacity and health monitoring, since sustained high cpmCPUTotal5minRev combined with a specific process's rising cpmProcExtUtil5MinRev quickly identifies which process is driving router CPU load. It depends on CISCO-SMI, CISCO-TC, and HCNUM-TC for its enterprise anchor and 64-bit counter types, and is deployed across virtually all Cisco IOS/IOS-XE routing and switching platforms; network teams researching the cisco process mib frequently reference cpmCPUTotalTable and cpmProcessExtRevTable when building CPU-alerting dashboards.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-PROCESS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco IOS / IOS-XE routers and switches (broad platform coverage)
Monitoring Examples
An operator polls cpmCPUTotal5minRev for sustained high overall CPU utilization, then cross-references cpmProcessExtRevTable's cpmProcExtUtil5MinRev per process; a single process consistently near 100% utilization alongside a rising cpmProcessRespawnCount would indicate a runaway or crash-looping process driving router CPU load.
What Can Be Monitored
- overall CPU utilization (5 sec/1 min/5 min)
- CPU load averages (1/5/15 min)
- system memory used/free/committed
- per-process CPU utilization and memory allocation
- process respawn/crash counts
- configurable CPU rising/falling thresholds and history
This MIB depends on
Related MIBs
Imported Objects
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From CISCO-TC
| EntPhysicalIndexOrZero | |
| Unsigned64 |
From HCNUM-TC
| CounterBasedGauge64 |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowPointer | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using cpmCPUMemoryHCFree OID:
Select a Cisco IOS/IOS-XE router or switch (CPU/process monitoring) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cpmCPUMemoryHCFree into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The overall CPU wide system memory which is currently free. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if utilization exceeds 85%, a common warning threshold before sustained high load affects performance. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ciscoProcessMIB | 1.3.6.1.4.1.9.9.109 | The MIB module to describe active system processes. Virtual Machine refers to those OS which can run the code or process of a different executional model OS. Virtual Process assume the executional model of a OS which is different from Native OS. Virtual Processes are also referred as Tasks. Thread is a sequence of instructions to be executed within a program. Thread which adhere to POSIX standard is referred as a POSIX thread. | ||
| ciscoProcessMIBConformance | 1.3.6.1.4.1.9.9.109.3 | |||
| ciscoProcessMIBNotifPrefix | 1.3.6.1.4.1.9.9.109.2 | |||
| ciscoProcessMIBNotifs | 1.3.6.1.4.1.9.9.109.2.0 | |||
| ciscoProcessMIBObjects | 1.3.6.1.4.1.9.9.109.1 | |||
| cpmCompliances | 1.3.6.1.4.1.9.9.109.3.1 | |||
| cpmCPU | 1.3.6.1.4.1.9.9.109.1.1 | |||
| NTF cpmCPUFallingThreshold | 1.3.6.1.4.1.9.9.109.2.0.2 | A cpmCPUFallingThresholdTrap is sent when the configured falling threshold (cpmCPURisingThresholdValue) is reached and CPU utilization remained under threshold for configured interval (cpmCPUFallingThresholdPeriod) and such a notification is requested. | ||
| U32 cpmCPUFallingThresholdPeriod | 1.3.6.1.4.1.9.9.109.1.2.4.1.5 | Unsigned32 | read-create | This is an observation interval. The value of this object indicates that CPU utilization should be below cpmCPUFallingThresholdValue for this duration to send a cpmCPURisingThreshold notification to the NMS. |
| U32 cpmCPUFallingThresholdValue | 1.3.6.1.4.1.9.9.109.1.2.4.1.4 | Unsigned32 | read-create | The percentage falling threshold value configured by the user. The value indicates, if the percentage CPU utilization is equal to or below this value for cpmCPUFallingThresholdPeriod duration then send a cpmCPUFallingThreshold notification to the NMS. |
| cpmCPUHistory | 1.3.6.1.4.1.9.9.109.1.2.5 | |||
| TIM cpmCPUHistoryCreatedTime | 1.3.6.1.4.1.9.9.109.1.2.5.3.1.5 | TimeStamp | read-only | Time stamp with respect to sysUpTime indicating the time at which this report is created. |
| cpmCPUHistoryEntry | 1.3.6.1.4.1.9.9.109.1.2.5.3.1 | not-accessible | A historical sample of CPU utilization statistics. cpmCPUTotalIndex identifies the CPU (or group of CPUs) for which this history is collected. When the cpmCPUHistorySize is reached the least recent entry is lost. | |
| cpmCPUHistoryGroup | 1.3.6.1.4.1.9.9.109.3.2.9 | A collection of objects providing information about CPU utilization history. | ||
| G32 cpmCPUHistoryInterruptUtil | 1.3.6.1.4.1.9.9.109.1.2.5.3.1.4 | Gauge32 | read-only | Percentage of CPU utilization in the interrupt context at cpmCPUHistoryCreated. |
| TIM cpmCPUHistoryProcCreated | 1.3.6.1.4.1.9.9.109.1.2.5.4.1.4 | TimeStamp | read-only | The time when the process was created. The process ID and the time when the process was created, uniquely identifies a process. |
| U32 cpmCPUHistoryProcId | 1.3.6.1.4.1.9.9.109.1.2.5.4.1.2 | Unsigned32 | read-only | The process Id associated with this entry. |
| STR cpmCPUHistoryProcName | 1.3.6.1.4.1.9.9.109.1.2.5.4.1.3 | DisplayString | read-only | The process name associated with this entry. |
| G32 cpmCPUHistoryProcUtil | 1.3.6.1.4.1.9.9.109.1.2.5.4.1.5 | Gauge32 | read-only | The percentage CPU utilization of a process at cpmCPUHistoryCreatedTime. |
| U32 cpmCPUHistoryReportId | 1.3.6.1.4.1.9.9.109.1.2.5.3.1.1 | Unsigned32 | not-accessible | All the entries which are created at the same time will have same value for this object. When the configured threshold for being a part of History table is reached then the qualified processes become the part of history table. The entries which became the part of history table at one instant will have the same value for this object. When this object reaches the max index value then it will wrap around. |
| U32 cpmCPUHistoryReportSize | 1.3.6.1.4.1.9.9.109.1.2.5.3.1.2 | Unsigned32 | read-only | The number of process entries in a report. This object gives information about how many processes became a part of history table at one instant. |
| U32 cpmCPUHistorySize | 1.3.6.1.4.1.9.9.109.1.2.5.2 | Unsigned32 | read-write | A value configured by the user which specifies the number of reports in the history table. A report contains set of processes which crossed the cpmCPUHistoryThreshold in the last cpmCPUMonInterval along with the time at which this report is created, total and interrupt CPU utilizations. When this object is changed the new value will have effect in the next interval. |
| cpmCPUHistoryTable | 1.3.6.1.4.1.9.9.109.1.2.5.3 | not-accessible | A list of CPU utilization history entries. | |
| U32 cpmCPUHistoryThreshold | 1.3.6.1.4.1.9.9.109.1.2.5.1 | Unsigned32 | read-write | The user configured value of this object gives the minimum percent CPU utilization of a process in the last cpmCPUMonInterval duration required to be a member of history table. When this object is changed the new value will have effect in the next interval. |
| G32 cpmCPUHistoryTotalUtil | 1.3.6.1.4.1.9.9.109.1.2.5.3.1.3 | Gauge32 | read-only | Total percentage of CPU utilization at cpmCPUHistoryCreated. |
| G32 cpmCPUInterruptMonIntervalValue | 1.3.6.1.4.1.9.9.109.1.1.1.1.11 | Gauge32 | read-only | The overall CPU busy percentage in the interrupt context in the last cpmCPUMonInterval period. |
| CPU cpmCPULoadAvg15min | 1.3.6.1.4.1.9.9.109.1.1.1.1.26 | CPULoadAverage | read-only | The overall CPU load Average in the last 15 minutes period |
| CPU cpmCPULoadAvg1min | 1.3.6.1.4.1.9.9.109.1.1.1.1.24 | CPULoadAverage | read-only | The overall CPU load Average in the last 1 minute period |
| CPU cpmCPULoadAvg5min | 1.3.6.1.4.1.9.9.109.1.1.1.1.25 | CPULoadAverage | read-only | The overall CPU load Average in the last 5 minutes period |
| cpmCPULoadAvgGroup | 1.3.6.1.4.1.9.9.109.3.2.23 | A collection of objects providing CPU load average information | ||
| G32 cpmCPUMemoryCommitted | 1.3.6.1.4.1.9.9.109.1.1.1.1.27 | Gauge32 | read-only | The overall CPU wide system memory which is currently Committed. |
| G32 cpmCPUMemoryCommittedOvrflw | 1.3.6.1.4.1.9.9.109.1.1.1.1.28 | Gauge32 | read-only | This object represents the upper 32-bit of cpmCPUMemoryCommitted. This object needs to be supported only when the value of cpmCPUMemoryCommitted exceeds 32-bit, otherwise this object value would be set to 0. |
| G32 cpmCPUMemoryFree | 1.3.6.1.4.1.9.9.109.1.1.1.1.13 | Gauge32 | read-only | The overall CPU wide system memory which is currently free. |
| G32 cpmCPUMemoryFreeOvrflw | 1.3.6.1.4.1.9.9.109.1.1.1.1.18 | Gauge32 | read-only | This object represents the upper 32-bit of cpmCPUMemoryFree. This object needs to be supported only when the value of cpmCPUMemoryFree exceeds 32-bit, otherwise this object value would be set to 0. |
| NUM cpmCPUMemoryHCCommitted | 1.3.6.1.4.1.9.9.109.1.1.1.1.29 | CounterBasedGauge64 | read-only | The overall CPU wide system memory which is currently committed. This object is a 64-bit version of cpmCPUMemoryCommitted |
| C64 cpmCPUMemoryHCFreeEx | 1.3.6.1.4.1.9.9.109.1.1.1.1.19 | Counter64 | read-only | The overall CPU wide system memory which is currently free. This object is a 64-bit version of cpmCPUMemoryFree. |
| NUM cpmCPUMemoryHCKernelReserved | 1.3.6.1.4.1.9.9.109.1.1.1.1.21 | CounterBasedGauge64 | read-only | The overall CPU wide system memory which is reserved for kernel usage. This object is a 64-bit version of cpmCPUMemoryKernelReserved. |
| NUM cpmCPUMemoryHCLowest | 1.3.6.1.4.1.9.9.109.1.1.1.1.23 | CounterBasedGauge64 | read-only | The lowest free memory that has been recorded since device has booted. This object is a 64-bit version of cpmCPUMemoryLowest. |
| NUM cpmCPUMemoryHCUsed | 1.3.6.1.4.1.9.9.109.1.1.1.1.17 | CounterBasedGauge64 | read-only | The overall CPU wide system memory which is currently under use. This object is a 64-bit version of cpmCPUMemoryUsed. |
| G32 cpmCPUMemoryKernelReserved | 1.3.6.1.4.1.9.9.109.1.1.1.1.14 | Gauge32 | read-only | The overall CPU wide system memory which is reserved for kernel usage. |
| G32 cpmCPUMemoryKernelReservedOvrflw | 1.3.6.1.4.1.9.9.109.1.1.1.1.20 | Gauge32 | read-only | This object represents the upper 32-bit of cpmCPUMemoryKernelReserved. This object needs to be supported only when the value of cpmCPUMemoryKernelReserved exceeds 32-bit, otherwise this object value would be set to 0. |
| G32 cpmCPUMemoryLowest | 1.3.6.1.4.1.9.9.109.1.1.1.1.15 | Gauge32 | read-only | The lowest free memory that has been recorded since device has booted. |
| G32 cpmCPUMemoryLowestOvrflw | 1.3.6.1.4.1.9.9.109.1.1.1.1.22 | Gauge32 | read-only | This object represents the upper 32-bit of cpmCPUMemoryLowest. This object needs to be supported only when the value of cpmCPUMemoryLowest exceeds 32-bit, otherwise this object value would be set to 0. |
| G32 cpmCPUMemoryUsed | 1.3.6.1.4.1.9.9.109.1.1.1.1.12 | Gauge32 | read-only | The overall CPU wide system memory which is currently under use. |
| G32 cpmCPUMemoryUsedOvrflw | 1.3.6.1.4.1.9.9.109.1.1.1.1.16 | Gauge32 | read-only | This object represents the upper 32-bit of cpmCPUMemoryUsed. This object needs to be supported only when the value of cpmCPUMemoryUsed exceeds 32-bit, otherwise this object value would be set to 0. |
| U32 cpmCPUMonInterval | 1.3.6.1.4.1.9.9.109.1.1.1.1.9 | Unsigned32 | read-only | CPU usage monitoring interval. The value of this object in seconds indicates the how often the CPU utilization is calculated and monitored. |
| cpmCPUPosixMemoryGroup | 1.3.6.1.4.1.9.9.109.3.2.11 | A collection of common objects providing CPU wide System memory information running POSIX compliant OS. | ||
| cpmCPUProcessHistoryEntry | 1.3.6.1.4.1.9.9.109.1.2.5.4.1 | not-accessible | A historical sample of process utilization statistics. The entries in this table will have corresponding entires in the cpmCPUHistoryTable. The entries in this table get deleted when the entry associated with this entry in the cpmCPUHistoryTable gets deleted. | |
| U32 cpmCPUProcessHistoryIndex | 1.3.6.1.4.1.9.9.109.1.2.5.4.1.1 | Unsigned32 | not-accessible | An index that uniquely identifies an entry in the cmpCPUProcessHistory table among those in the same report. This index is between 1 to N, where N is the cpmCPUHistoryReportSize. |
| cpmCPUProcessHistoryTable | 1.3.6.1.4.1.9.9.109.1.2.5.4 | not-accessible | A list of process history entries. This table contains CPU utilization of processes which crossed the cpmCPUHistoryThreshold. | |
| NTF cpmCPURisingThreshold | 1.3.6.1.4.1.9.9.109.2.0.1 | A cpmCPURisingThreshold notification is sent when configured rising CPU utilization threshold (cpmCPURisingThresholdValue) is reached and CPU utilization remained above the threshold for configured interval(cpmCPURisingThresholdPeriod) and such a notification is requested. The cpmProcExtUtil5SecRev and cpmProcessTimeCreated objects can be repeated multiple times in a notification indicating the top users of CPU. | ||
| U32 cpmCPURisingThresholdPeriod | 1.3.6.1.4.1.9.9.109.1.2.4.1.3 | Unsigned32 | read-create | This is an observation interval. The value of this object indicates that the CPU utilization should be above cpmCPURisingThresholdValue for this duration to send a cpmCPURisingThreshold notification to the NMS. |
| U32 cpmCPURisingThresholdValue | 1.3.6.1.4.1.9.9.109.1.2.4.1.2 | Unsigned32 | read-create | The percentage rising threshold value configured by the user. The value indicates, if the percentage CPU utilization is equal to or above this value for cpmCPURisingThresholdPeriod duration then send a cpmCPURisingThreshold notification to the NMS. |
| INT cpmCPUThresholdClass | 1.3.6.1.4.1.9.9.109.1.2.4.1.1 | INTEGER | not-accessible | Value of this object indicates the type of utilization, which is monitored. The total(1) indicates the total CPU utilization, interrupt(2) indicates the the CPU utilization in interrupt context and process(3) indicates the CPU utilization in the process level execution context. |
| cpmCPUThresholdEntry | 1.3.6.1.4.1.9.9.109.1.2.4.1 | not-accessible | An entry containing information about CPU thresholding parameters. cpmCPUTotalIndex identifies the CPU (or group of CPUs) for which this configuration applies. | |
| ROW cpmCPUThresholdEntryStatus | 1.3.6.1.4.1.9.9.109.1.2.4.1.6 | RowStatus | read-create | The status of this table entry. |
| cpmCPUThresholdGroup | 1.3.6.1.4.1.9.9.109.3.2.8 | A collection of objects used for configuration of thresholding. | ||
| cpmCPUThresholdNotificationGroup | 1.3.6.1.4.1.9.9.109.3.2.10 | A group of notifications. | ||
| cpmCPUThresholdTable | 1.3.6.1.4.1.9.9.109.1.2.4 | not-accessible | This table contains the information about the thresholding values for CPU , configured by the user. | |
| G32 cpmCPUTotal1min | 1.3.6.1.4.1.9.9.109.1.1.1.1.4 | Gauge32 | read-only | The overall CPU busy percentage in the last 1 minute period. This object obsoletes the avgBusy1 object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal1minRev which has the changed range of value (0..100). |
| G32 cpmCPUTotal1minRev | 1.3.6.1.4.1.9.9.109.1.1.1.1.7 | Gauge32 | read-only | The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100). |
| G32 cpmCPUTotal5min | 1.3.6.1.4.1.9.9.109.1.1.1.1.5 | Gauge32 | read-only | The overall CPU busy percentage in the last 5 minute period. This object deprecates the avgBusy5 object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal5minRev which has the changed range of value (0..100). |
| G32 cpmCPUTotal5minRev | 1.3.6.1.4.1.9.9.109.1.1.1.1.8 | Gauge32 | read-only | The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100). |
| G32 cpmCPUTotal5sec | 1.3.6.1.4.1.9.9.109.1.1.1.1.3 | Gauge32 | read-only | The overall CPU busy percentage in the last 5 second period. This object obsoletes the busyPer object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal5secRev which has the changed range of value (0..100). |
| G32 cpmCPUTotal5secRev | 1.3.6.1.4.1.9.9.109.1.1.1.1.6 | Gauge32 | read-only | The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue |
| cpmCPUTotalEntry | 1.3.6.1.4.1.9.9.109.1.1.1.1 | not-accessible | Overall information about the CPU load. Entries in this table come and go as CPUs are added and removed from the system. | |
| cpmCPUTotalGroup | 1.3.6.1.4.1.9.9.109.3.2.1 | A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group is deprecated since the objects cpmCPUTotal5sec, cpmCPUTotal1min and cpmCPUTotal5min are deprecated. A new object cpmCPUTotalGroupRev is added in place of it. | ||
| cpmCPUTotalGroupRev | 1.3.6.1.4.1.9.9.109.3.2.4 | A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group deprecates cpmCPUTotalGroup. This group is deprecated since the object cpmCPUTotal5secRev is deprecated. A new object cpmCPUTotalGroupRev1 is added in place of it. | ||
| cpmCPUTotalGroupRev1 | 1.3.6.1.4.1.9.9.109.3.2.7 | A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group deprecates cpmCPUTotalGroupRev. | ||
| cpmCPUTotalHCGroup | 1.3.6.1.4.1.9.9.109.3.2.16 | A collection of High Capacity (HC) objects providing CPU load monitoring information. | ||
| U32 cpmCPUTotalIndex | 1.3.6.1.4.1.9.9.109.1.1.1.1.1 | Unsigned32 | not-accessible | An index that uniquely represents a CPU (or group of CPUs) whose CPU load information is reported by a row in this table. This index is assigned arbitrarily by the engine and is not saved over reboots. |
| cpmCPUTotalMemoryCommitGroup | 1.3.6.1.4.1.9.9.109.3.2.24 | A collection of objects providing CPU system Committed memory information. | ||
| G32 cpmCPUTotalMonIntervalValue | 1.3.6.1.4.1.9.9.109.1.1.1.1.10 | Gauge32 | read-only | The overall CPU busy percentage in the last cpmCPUMonInterval period. This object deprecates the object cpmCPUTotal5secRev. |
| cpmCPUTotalOverflowGroup | 1.3.6.1.4.1.9.9.109.3.2.15 | A collection of Overflow (Ovrflw) objects providing CPU load monitoring information. | ||
| ENT cpmCPUTotalPhysicalIndex | 1.3.6.1.4.1.9.9.109.1.1.1.1.2 | EntPhysicalIndexOrZero | read-only | The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero. |
| cpmCPUTotalTable | 1.3.6.1.4.1.9.9.109.1.1.1 | not-accessible | A table of overall CPU statistics. | |
| cpmGroups | 1.3.6.1.4.1.9.9.109.3.2 | |||
| cpmPosixProcessGroup | 1.3.6.1.4.1.9.9.109.3.2.12 | A collection of common objects providing Process information on devices running POSIX compliant OS. | ||
| cpmProcess | 1.3.6.1.4.1.9.9.109.1.2 | |||
| U32 cpmProcessAverageUSecs | 1.3.6.1.4.1.9.9.109.1.2.1.1.6 | Unsigned32 | read-only | Average elapsed CPU time in microseconds when the process was active. This object deprecates the object cpmProcessuSecs. |
| G32 cpmProcessDataSegmentSize | 1.3.6.1.4.1.9.9.109.1.2.3.1.16 | Gauge32 | read-only | This indicates the data segment of a process and all its shared objects. |
| G32 cpmProcessDataSegmentSizeOvrflw | 1.3.6.1.4.1.9.9.109.1.2.3.1.25 | Gauge32 | read-only | This object represents the upper 32-bit of cpmProcessDataSegmentSize. This object needs to be supported only when the value of cpmProcessDataSegmentSize exceeds 32-bit, otherwise this object value would be set to 0. |
| G32 cpmProcessDynamicMemorySize | 1.3.6.1.4.1.9.9.109.1.2.3.1.18 | Gauge32 | read-only | This indicates the amount of dynamic memory being used by the process. |
| G32 cpmProcessDynamicMemorySizeOvrflw | 1.3.6.1.4.1.9.9.109.1.2.3.1.29 | Gauge32 | read-only | This object represents the upper 32-bit of cpmProcessDynamicMemorySize. This object needs to be supported only when the value of cpmProcessDynamicMemorySize exceeds 32-bit, otherwise this object value would be set to 0. |
| cpmProcessEntry | 1.3.6.1.4.1.9.9.109.1.2.1.1 | not-accessible | Generic information about an active process on this device. Entries in this table come and go as processes are created and destroyed by the device. | |
| cpmProcessExtEntry | 1.3.6.1.4.1.9.9.109.1.2.2.1 | not-accessible | An entry containing additional information for a particular process. This object is deprecated by cpmProcessExtRevEntry. | |
| cpmProcessExtGroup | 1.3.6.1.4.1.9.9.109.3.2.3 | A collection of objects providing additional and more detailed process monitoring information. This group is mandatory for all cisco devices that have the internal capability to keep this information. This group is deprecated and new group cpmProcessExtGroupRev is added. | ||
| cpmProcessExtGroupRev | 1.3.6.1.4.1.9.9.109.3.2.5 | A collection of objects providing additional and more detailed process monitoring information. This group is mandatory for all cisco devices that have the internal capability to keep this information. This group is formed after deprecating cpmProcessExtGroup. cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev, cpmProcExtInvokedRev, cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev and cpmProcExtUtil5MinRev are the new objects added. | ||
| cpmProcessExtRevEntry | 1.3.6.1.4.1.9.9.109.1.2.3.1 | not-accessible | An entry containing additional information for a particular process. This object deprecates cpmProcessExtEntry. | |
| cpmProcessExtRevHCGroup | 1.3.6.1.4.1.9.9.109.3.2.18 | A collection of High Capacity objects providing additional and more detailed process monitoring information. | ||
| cpmProcessExtRevOverflowGroup | 1.3.6.1.4.1.9.9.109.3.2.17 | A collection of Overflow objects providing additional and more detailed process monitoring information. | ||
| cpmProcessExtRevTable | 1.3.6.1.4.1.9.9.109.1.2.3 | not-accessible | This table contains information that may or may not be available on all cisco devices. It contains additional objects for the more general cpmProcessTable. This object deprecates cpmProcessExtTable. | |
| cpmProcessExtTable | 1.3.6.1.4.1.9.9.109.1.2.2 | not-accessible | This table contains information that may or may not be available on all cisco devices. It contains additional objects for the more general cpmProcessTable. This object is deprecated by cpmProcessExtRevTable. | |
| cpmProcessGroup | 1.3.6.1.4.1.9.9.109.3.2.2 | A collection of objects providing common process monitoring information. This group is mandatory for all cisco devices. This object is deprecated by cpmProcessGroupRev. | ||
| cpmProcessGroupRev | 1.3.6.1.4.1.9.9.109.3.2.6 | A collection of objects providing common process monitoring information. This group is mandatory for all cisco devices. This object deprecates cpmProcessGroup. | ||
| NUM cpmProcessHCDataSegmentSize | 1.3.6.1.4.1.9.9.109.1.2.3.1.26 | CounterBasedGauge64 | read-only | This indicates the data segment of a process and all its shared objects.. This object is a 64-bit version of cpmProcessDataSegmentSize. |
| NUM cpmProcessHCDynamicMemorySize | 1.3.6.1.4.1.9.9.109.1.2.3.1.30 | CounterBasedGauge64 | read-only | This indicates the amount of dynamic memory being used by the process. This object is a 64-bit version of cpmProcessDynamicMemorySize. |
| NUM cpmProcessHCStackSize | 1.3.6.1.4.1.9.9.109.1.2.3.1.28 | CounterBasedGauge64 | read-only | This indicates the amount of stack memory used by the process. This object is a 64-bit version of cpmProcessStackSize. |
| UNS cpmProcessHCTextSegmentSize | 1.3.6.1.4.1.9.9.109.1.2.3.1.24 | Unsigned64 | read-only | This indicates the text memory of a process and all its shared objects. This object is a 64-bit version of cpmProcessTextSegmentSize. |
| STR cpmProcessLastRestartUser | 1.3.6.1.4.1.9.9.109.1.2.3.1.14 | SnmpAdminString | read-only | This indicate the user that has last restarted the process or has taken running coredump of the process. |
| INT cpmProcessMemoryCore | 1.3.6.1.4.1.9.9.109.1.2.3.1.13 | INTEGER | read-only | This indicates the part of process memory to be dumped when a process crashes. The process memory is used for debugging purposes to trace the root cause of the crash. sparse - Some operating systems support minimal dump of process core like register info, partial stack, partial memory pages especially for critical process to facilitate faster process restart. |
| STR cpmProcessName | 1.3.6.1.4.1.9.9.109.1.2.1.1.2 | DisplayString | read-only | The name associated with this process. If the name is longer than 32 characters, it will be truncated to the first 31 characters, and a `*' will be appended as the last character to imply this is a truncated process name. |
| U32 cpmProcessPID | 1.3.6.1.4.1.9.9.109.1.2.1.1.1 | Unsigned32 | read-only | This object contains the process ID. cpmTimeCreated should be checked against the last time it was polled, and if it has changed the PID has been reused and the entire entry should be polled again. |
| T/F cpmProcessRespawn | 1.3.6.1.4.1.9.9.109.1.2.3.1.10 | TruthValue | read-only | This indicates whether respawn of a process is enabled or not. If enabled the process in context repawns after it has crashed/stopped. |
| C32 cpmProcessRespawnAfterLastPatch | 1.3.6.1.4.1.9.9.109.1.2.3.1.12 | Counter32 | read-only | This indicates the number of times a process has restarted after the last patch is applied. This is to determine the stability of the last patch. |
| C32 cpmProcessRespawnCount | 1.3.6.1.4.1.9.9.109.1.2.3.1.11 | Counter32 | read-only | This indicates the number of times the process has respawned/restarted. |
| G32 cpmProcessStackSize | 1.3.6.1.4.1.9.9.109.1.2.3.1.17 | Gauge32 | read-only | This indicates the amount of stack memory used by the process. |
| G32 cpmProcessStackSizeOvrflw | 1.3.6.1.4.1.9.9.109.1.2.3.1.27 | Gauge32 | read-only | This object represents the upper 32-bit of cpmProcessStackSize. This object needs to be supported only when the value of cpmProcessStackSize exceeds 32-bit, otherwise this object value would be set to 0. |
| cpmProcessTable | 1.3.6.1.4.1.9.9.109.1.2.1 | not-accessible | A table of generic information on all active processes on this device. | |
| U32 cpmProcessTextSegmentSize | 1.3.6.1.4.1.9.9.109.1.2.3.1.15 | Unsigned32 | read-only | This indicates the text memory of a process and all its shared objects. |
| U32 cpmProcessTextSegmentSizeOvrflw | 1.3.6.1.4.1.9.9.109.1.2.3.1.23 | Unsigned32 | read-only | This object represents the upper 32-bit of cpmProcessTextSegmentSize. This object needs to be supported only when the value of cpmProcessTextSegmentSize exceeds 32-bit, otherwise this object value would be set to 0. |
| TIM cpmProcessTimeCreated | 1.3.6.1.4.1.9.9.109.1.2.1.1.5 | TimeStamp | read-only | The time when the process was created. The process ID and the time when the process was created, uniquely identifies a process. |
| INT cpmProcessType | 1.3.6.1.4.1.9.9.109.1.2.3.1.9 | INTEGER | read-only | This indicates the kind of process in context. |
| U32 cpmProcessuSecs | 1.3.6.1.4.1.9.9.109.1.2.1.1.4 | Unsigned32 | read-only | Average elapsed CPU time in microseconds when the process was active. This object is deprecated by cpmProcessAverageUSecs. |
| NUM cpmProcExtHCMemAllocatedRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.20 | CounterBasedGauge64 | read-only | The sum of all the dynamically allocated memory that this process has received from the system. This includes memory that may have been returned. This object is a 64-bit version of cpmProcExtMemAllocatedRev. |
| NUM cpmProcExtHCMemFreedRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.22 | CounterBasedGauge64 | read-only | The sum of all memory that this process has returned to the system. This object is a 64-bit version of cpmProcExtMemFreedRev. |
| C32 cpmProcExtInvoked | 1.3.6.1.4.1.9.9.109.1.2.2.1.3 | Counter32 | read-only | The number of times since cpmTimeCreated that the process has been invoked. This object is deprecated by cpmProcExtInvokedRev. |
| C32 cpmProcExtInvokedRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.3 | Counter32 | read-only | The number of times since cpmTimeCreated that the process has been invoked. This object deprecates cpmProcExtInvoked. |
| G32 cpmProcExtMemAllocated | 1.3.6.1.4.1.9.9.109.1.2.2.1.1 | Gauge32 | read-only | The sum of all the dynamically allocated memory that this process has received from the system. This includes memory that may have been returned. The sum of freed memory is provided by cpmProcExtMemFreed. This object is deprecated by cpmProcExtMemAllocatedRev. |
| G32 cpmProcExtMemAllocatedRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.1 | Gauge32 | read-only | The sum of all the dynamically allocated memory that this process has received from the system. This includes memory that may have been returned. The sum of freed memory is provided by cpmProcExtMemFreedRev. This object deprecates cpmProcExtMemAllocated. |
| G32 cpmProcExtMemAllocatedRevOvrflw | 1.3.6.1.4.1.9.9.109.1.2.3.1.19 | Gauge32 | read-only | This object represents the upper 32-bit of cpmProcExtMemAllocatedRev. This object needs to be supported only when the value of cpmProcExtMemAllocatedRev exceeds 32-bit, otherwise this object value would be set to 0. |
| G32 cpmProcExtMemFreed | 1.3.6.1.4.1.9.9.109.1.2.2.1.2 | Gauge32 | read-only | The sum of all memory that this process has returned to the system. This object is deprecated by cpmProcExtMemFreedRev. |
| G32 cpmProcExtMemFreedRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.2 | Gauge32 | read-only | The sum of all memory that this process has returned to the system. This object deprecates cpmProcExtMemFreed. |
| G32 cpmProcExtMemFreedRevOvrflw | 1.3.6.1.4.1.9.9.109.1.2.3.1.21 | Gauge32 | read-only | This object represents the upper 32-bit of cpmProcExtMemFreedRev. This object needs to be supported only when the value of cpmProcExtMemFreedRev exceeds 32-bit,otherwise this object value would be set to 0. |
| INT cpmProcExtPriority | 1.3.6.1.4.1.9.9.109.1.2.2.1.8 | INTEGER | read-write | The priority level at which the process is running. This object is deprecated by cpmProcExtPriorityRev. |
| INT cpmProcExtPriorityRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.8 | INTEGER | read-only | The priority level at which the process is running. This object deprecates cpmProcExtPriority. |
| C32 cpmProcExtRuntime | 1.3.6.1.4.1.9.9.109.1.2.2.1.4 | Counter32 | read-only | The amount of CPU time the process has used, in microseconds. This object is deprecated by cpmProcExtRuntimeRev. |
| C32 cpmProcExtRuntimeRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.4 | Counter32 | read-only | The amount of CPU time the process has used, in microseconds. This object deprecates cpmProcExtRuntime. |
| G32 cpmProcExtUtil1Min | 1.3.6.1.4.1.9.9.109.1.2.2.1.6 | Gauge32 | read-only | This object provides a general idea of how busy a process caused the processor to be over a 1 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil1MinRev which has the changed range of value (0..100). |
| G32 cpmProcExtUtil1MinRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.6 | Gauge32 | read-only | This object provides a general idea of how busy a process caused the processor to be over a 1 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil1Min and increases the value range to (0..100). |
| G32 cpmProcExtUtil5Min | 1.3.6.1.4.1.9.9.109.1.2.2.1.7 | Gauge32 | read-only | This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil5MinRev which has the changed range of value (0..100). |
| G32 cpmProcExtUtil5MinRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.7 | Gauge32 | read-only | This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil5Min and increases the value range to (0..100). |
| G32 cpmProcExtUtil5Sec | 1.3.6.1.4.1.9.9.109.1.2.2.1.5 | Gauge32 | read-only | This object provides a general idea of how busy a process caused the processor to be over a 5 second period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil5SecRev which has the changed range of value (0..100). |
| G32 cpmProcExtUtil5SecRev | 1.3.6.1.4.1.9.9.109.1.2.3.1.5 | Gauge32 | read-only | This object provides a general idea of how busy a process caused the processor to be over a 5 second period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil5Sec and increases the value range to (0..100). |
| cpmThread | 1.3.6.1.4.1.9.9.109.1.3 | |||
| NUM cpmThreadBlockingProcess | 1.3.6.1.4.1.9.9.109.1.3.1.1.5 | RowPointer | read-only | This object identifies the process on which the current thread is blocked on. This points to the cpmProcessTable of the process on which the thread in context is blocked. This is valid only to threads which are either in send/reply states. For the rest of the threads it is returned as 0.0 |
| G32 cpmThreadCpuUtilization | 1.3.6.1.4.1.9.9.109.1.3.1.1.6 | Gauge32 | read-only | This object provides a general idea on how busy the thread in context caused the processor to be. |
| cpmThreadEntry | 1.3.6.1.4.1.9.9.109.1.3.1.1 | not-accessible | An entry containing the general statistics of a POSIX thread. | |
| cpmThreadGroup | 1.3.6.1.4.1.9.9.109.3.2.13 | A collection of objects providing thread information information on devices running POSIX compliant OS. | ||
| cpmThreadHCGroup | 1.3.6.1.4.1.9.9.109.3.2.20 | A collection of High Capacity objects providing thread information on devices running POSIX compliant OS. | ||
| NUM cpmThreadHCStackSize | 1.3.6.1.4.1.9.9.109.1.3.1.1.9 | CounterBasedGauge64 | read-only | This object indicates the stack size allocated to the thread in context. This object is a 64-bit version of cpmThreadStackSize. |
| U32 cpmThreadID | 1.3.6.1.4.1.9.9.109.1.3.1.1.1 | Unsigned32 | not-accessible | This object contains the thread ID. ThreadID is Unique per process. |
| STR cpmThreadName | 1.3.6.1.4.1.9.9.109.1.3.1.1.2 | SnmpAdminString | read-only | This object represents the name of the thread. Thread names need not be unique. Hence statistics should be analyzed against thread ID. |
| cpmThreadOverflowGroup | 1.3.6.1.4.1.9.9.109.3.2.19 | A collection of Overflow objects providing thread information on devices running POSIX compliant OS. | ||
| U32 cpmThreadPriority | 1.3.6.1.4.1.9.9.109.1.3.1.1.3 | Unsigned32 | read-only | This object indicates the priority of a POSIX thread. The higher the number, the higher the priority of the thread over other threads. |
| G32 cpmThreadStackSize | 1.3.6.1.4.1.9.9.109.1.3.1.1.7 | Gauge32 | read-only | This object indicates the stack size allocated to the thread in context. |
| G32 cpmThreadStackSizeOvrflw | 1.3.6.1.4.1.9.9.109.1.3.1.1.8 | Gauge32 | read-only | This object represents the upper 32-bit of cpmThreadStackSize. This object needs to be supported only when the value of cpmThreadStackSize exceeds 32-bit, otherwise this object value would be set to 0. |
| INT cpmThreadState | 1.3.6.1.4.1.9.9.109.1.3.1.1.4 | INTEGER | read-only | This object indicates the current state of a thread. Running state means that the thread is actively consumig CPU. All the other states are just waiting states. The valid states are: other - Any other state apart from the listed ones. dead - Kernel is waiting to release the thread's resources. running - Actively running on a CPU. ready - Not running on a CPU, but is ready to run (one or more higher or equal priority threads are running). stopped - Suspended (SIGSTOP signal). send - Waiting for a server to receive a message. receive - Waiting for a client to send a message. reply - Waiting for a server to reply to a message. stack - Waiting for more stack to be allocated. waitpage - Waiting for process manager to resolve a fault on a page. sigsuspend - Suspended for a signal. sigwaitinfo - Waiting for a signal. nanosleep - Sleeping for a period of time. mutex - Waiting to acquire a mutex condvar - Waiting for a condition variable to be signalled. join - Waiting for the completion of another thread. intr - Waiting for an interrupt. sem - Waiting to acquire a semaphore. |
| cpmThreadTable | 1.3.6.1.4.1.9.9.109.1.3.1 | not-accessible | This table contains generic information about POSIX threads in the device. | |
| cpmVirtualProcess | 1.3.6.1.4.1.9.9.109.1.4 | |||
| cpmVirtualProcessEntry | 1.3.6.1.4.1.9.9.109.1.4.1.1 | not-accessible | An entry containing the general statistics of a virtual process in a virtual machine. | |
| cpmVirtualProcessGroup | 1.3.6.1.4.1.9.9.109.3.2.14 | A collection of objects providing virtual process information on devices that can run virtual machines. | ||
| cpmVirtualProcessHCGroup | 1.3.6.1.4.1.9.9.109.3.2.22 | A collection of High Capacity objects providing virtual process information on devices that can run virtual machines. | ||
| NUM cpmVirtualProcessHCMemAllocated | 1.3.6.1.4.1.9.9.109.1.4.1.1.11 | CounterBasedGauge64 | read-only | This object indicates the memory allocated by the virtual process inside the address space of a process running on Native OS. This object is a 64-bit version of cpmVirtualProcessMemAllocated. |
| NUM cpmVirtualProcessHCMemFreed | 1.3.6.1.4.1.9.9.109.1.4.1.1.13 | CounterBasedGauge64 | read-only | This object indicates the memory freed by the virtual process inside the address space of a process running on Native OS.This object is a 64-bit version of cpmVirtualProcessMemAllocated. |
| U32 cpmVirtualProcessID | 1.3.6.1.4.1.9.9.109.1.4.1.1.1 | Unsigned32 | not-accessible | This object indicates the process ID of a virtual process. PID is unique only inside one address space. Virtual process PID should be considered along with Parent process cpmProcessPID. |
| C32 cpmVirtualProcessInvokeCount | 1.3.6.1.4.1.9.9.109.1.4.1.1.8 | Counter32 | read-only | The number of times a virtual process is invoked. |
| G32 cpmVirtualProcessMemAllocated | 1.3.6.1.4.1.9.9.109.1.4.1.1.6 | Gauge32 | read-only | This object indicates the memory allocated by the virtual process inside the address space of a process running on Native OS. |
| G32 cpmVirtualProcessMemAllocatedOvrflw | 1.3.6.1.4.1.9.9.109.1.4.1.1.10 | Gauge32 | read-only | This object represents the upper 32-bit of cpmVirtualProcessMemAllocated. This object needs to be supported only when the value of cpmVirtualProcessMemAllocated exceeds 32-bit, otherwise this object value would be set to 0. |
| G32 cpmVirtualProcessMemFreed | 1.3.6.1.4.1.9.9.109.1.4.1.1.7 | Gauge32 | read-only | This object indicates the memory freed by the virtual process inside the address space of a process running on Native OS. |
| G32 cpmVirtualProcessMemFreedOvrflw | 1.3.6.1.4.1.9.9.109.1.4.1.1.12 | Gauge32 | read-only | This object represents the upper 32-bit of cpmVirtualProcessMemFreed. This object needs to be supported only when the value of cpmVirtualProcessMemFreed exceeds 32-bit, otherwise this object value would be set to 0. |
| STR cpmVirtualProcessName | 1.3.6.1.4.1.9.9.109.1.4.1.1.2 | SnmpAdminString | read-only | This object indicates the name of a virtual process. If the name is longer than 32 characters, it will be truncated to the first 31 characters, and a `*' will be appended as the last character to imply this is a truncated process name. |
| cpmVirtualProcessOverflowGroup | 1.3.6.1.4.1.9.9.109.3.2.21 | A collection of Overflow objects providing virtual process information on devices that can run virtual machines. | ||
| C32 cpmVirtualProcessRuntime | 1.3.6.1.4.1.9.9.109.1.4.1.1.9 | Counter32 | read-only | The amount of CPU time a virtual process has used in microseconds. |
| cpmVirtualProcessTable | 1.3.6.1.4.1.9.9.109.1.4.1 | not-accessible | This table contains information about virtual processes in a virtual machine. | |
| G32 cpmVirtualProcessUtil1Min | 1.3.6.1.4.1.9.9.109.1.4.1.1.4 | Gauge32 | read-only | This indicates an estimated CPU utilization by a virtual process over the last one minute. |
| G32 cpmVirtualProcessUtil5Min | 1.3.6.1.4.1.9.9.109.1.4.1.1.5 | Gauge32 | read-only | This indicates an estimated CPU utilization by a virtual process over the last 5 minutes. |
| G32 cpmVirtualProcessUtil5Sec | 1.3.6.1.4.1.9.9.109.1.4.1.1.3 | Gauge32 | read-only | This indicates an estimated CPU utilization by a virtual process over the last 5 seconds. |
| cProcessMIBCompliance | 1.3.6.1.4.1.9.9.109.3.1.1 | The compliance statement for entities which implement the Cisco Process MIB. This is deprecated and new compliance cProcessMIBComplianceRev is added. | ||
| cProcessMIBComplianceRev | 1.3.6.1.4.1.9.9.109.3.1.2 | The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBCompliance. | ||
| cProcessMIBComplianceRev1 | 1.3.6.1.4.1.9.9.109.3.1.3 | The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev. | ||
| cProcessMIBComplianceRev2 | 1.3.6.1.4.1.9.9.109.3.1.4 | The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev1. | ||
| cProcessMIBComplianceRev3 | 1.3.6.1.4.1.9.9.109.3.1.5 | The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev2. | ||
| cProcessMIBComplianceRev4 | 1.3.6.1.4.1.9.9.109.3.1.6 | The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev3. | ||
| cProcessMIBComplianceRev5 | 1.3.6.1.4.1.9.9.109.3.1.7 | The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev4 |
RFC description
Monitors CPU usage and process statistics for active system processes, virtual machines, virtual processes, and POSIX threads.
Start monitoring Cisco IOS / IOS-XE routers and switches (CPU/process monitoring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.