CISCO-SDWAN-OPER-SYSTEM-MIB

All MIBs › CISCO-SDWAN-OPER-SYSTEM-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2021-01-26

Category: Cisco Devices, Network Interfaces

Description: Provides operational system-level statistics and health metrics for Cisco SD-WAN vEdge and vManage nodes.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-SDWAN-OPER-SYSTEM-MIB?

CISCO-SDWAN-OPER-SYSTEM-MIB is a Cisco vendor MIB (under ciscoMgmt) that exposes operational system health telemetry for Cisco SD-WAN fabric nodes - vEdge routers, vSmart controllers, vManage/vBond appliances, and their virtual/hardware model variants enumerated in systemStatusModel. Under the systemStatus subtree it reports device personality and software version (systemStatusPersonality, systemStatusVersion), boot/uptime data (systemStatusRebootReason, systemStatusUptime, systemStatusMin1Avg/Min5Avg/Min15Avg load averages), CPU utilization (systemStatusCpuUser/CpuSystem/CpuIdle), memory (systemStatusMemTotal/MemUsed/MemFree/MemBuffers/MemCached, as Counter64), and disk usage (systemStatusDiskFs/DiskSize/DiskUsed/DiskAvail plus block-level DiskBsize/DiskBlocks/DiskBused/DiskBavail). It also reports vManage-specific state such as systemStatusVmanaged and systemStatusConfigTemplateName, tying an individual node back to centralized SD-WAN orchestration. This is a pure system-health/inventory MIB rather than a routing or tunnel-state MIB, deployed on Cisco SD-WAN (Viptela-derived) fabric nodes, and engineers can grab the CISCO-SDWAN-OPER-SYSTEM-MIB download when adding SD-WAN system monitoring to their NMS.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-SDWAN-OPER-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco SD-WAN (Viptela-derived, now Cisco Catalyst SD-WAN) vEdge routers, vSmart controllers, and vManage/vBond appliances

Monitoring Examples

An operator polls systemStatusCpuIdle and systemStatusMemFree on a vEdge router alongside systemStatusMin5Avg; a sustained drop in idle CPU combined with a climbing 5-minute load average and shrinking free memory would indicate the node is resource-constrained and at risk of dropping SD-WAN control-plane sessions.

What Can Be Monitored

CPU utilization (user/system/idle)
memory usage (total/used/free/buffers/cached)
disk usage and block-level statistics
system uptime and load averages
reboot reason and disk health status
vManage-managed status and assigned config template

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoSdwanOperSystemMIB	1.3.6.1.4.1.9.9.1004			This module defines the data model for system operation
ciscoSdwanOperSystemMIBCompliance	1.3.6.1.4.1.9.9.1004.3.1.1			The compliance statement for the SNMP entities that implement the ciscoSdwanOperSystemMIB module.
ciscoSdwanOperSystemMIBCompliances	1.3.6.1.4.1.9.9.1004.3.1
ciscoSdwanOperSystemMIBConform	1.3.6.1.4.1.9.9.1004.3
ciscoSdwanOperSystemMIBGroups	1.3.6.1.4.1.9.9.1004.3.2
ciscoSdwanOperSystemMIBObjects	1.3.6.1.4.1.9.9.1004.1
NTF ciscoSdwanSystemDomainIdChange	1.3.6.1.4.1.9.9.1004.0.1			System domain ID change trap
ciscoSdwanSystemMIBNotifObjects	1.3.6.1.4.1.9.9.1004.2
ciscoSdwanSystemMIBNotifs	1.3.6.1.4.1.9.9.1004.0
DOM ciscoSdwanSystemNewDomainId	1.3.6.1.4.1.9.9.1004.2.4	DomainId	read-only	New system domain ID
OCT ciscoSdwanSystemNewOrganizationName	1.3.6.1.4.1.9.9.1004.2.6	OCTET STRING	read-only	New system organization name
SIT ciscoSdwanSystemNewSiteId	1.3.6.1.4.1.9.9.1004.2.9	SiteId	read-only	New site ID
ADR ciscoSdwanSystemNewSystemIp	1.3.6.1.4.1.9.9.1004.2.12	CiscoSdwanIpAddress	read-only	New system IP address
DOM ciscoSdwanSystemOldDomainId	1.3.6.1.4.1.9.9.1004.2.3	DomainId	read-only	Old system domain ID
OCT ciscoSdwanSystemOldOrganizationName	1.3.6.1.4.1.9.9.1004.2.5	OCTET STRING	read-only	Old system organization name
SIT ciscoSdwanSystemOldSiteId	1.3.6.1.4.1.9.9.1004.2.8	SiteId	read-only	Old site ID
ADR ciscoSdwanSystemOldSystemIp	1.3.6.1.4.1.9.9.1004.2.11	CiscoSdwanIpAddress	read-only	Old system IP address
NTF ciscoSdwanSystemOrgNameChange	1.3.6.1.4.1.9.9.1004.0.2			System organization name change trap
NTF ciscoSdwanSystemPseudoCommitStatus	1.3.6.1.4.1.9.9.1004.0.3			Pseudo Commit status trap
NTF ciscoSdwanSystemSiteIdChange	1.3.6.1.4.1.9.9.1004.0.4			System site ID change trap
OCT ciscoSdwanSystemStatusStr	1.3.6.1.4.1.9.9.1004.2.7	OCTET STRING	read-only	System status
NTF ciscoSdwanSystemSystemCommit	1.3.6.1.4.1.9.9.1004.0.5			System commit trap
NTF ciscoSdwanSystemSystemIpChange	1.3.6.1.4.1.9.9.1004.0.6			System IP address change trap
OCT ciscoSdwanSystemUserName	1.3.6.1.4.1.9.9.1004.2.10	OCTET STRING	read-only	User name
cSdwanOperSystemGroup	1.3.6.1.4.1.9.9.1004.3.2.1			This is a collection of objects of oper system.
cSdwanOperSystemNotifObjsGroup	1.3.6.1.4.1.9.9.1004.3.2.2			This is a collection of objects of system notification objects.
cSdwanOperSystemNotifsGroup	1.3.6.1.4.1.9.9.1004.3.2.3			This is a collection of system notifications.
NOT netconfNotificationSeverity	1.3.6.1.4.1.9.9.1004.2.2	NotificationSeverity	read-only	Netconf notification severity level
systemStatus	1.3.6.1.4.1.9.9.1004.1.1
STR systemStatusConfigTemplateName	1.3.6.1.4.1.9.9.1004.1.1.38	String	read-only	Configuration template assigned by the vManage
STR systemStatusCpuIdle	1.3.6.1.4.1.9.9.1004.1.1.16	String	read-only	Cpu Idle
STR systemStatusCpuSystem	1.3.6.1.4.1.9.9.1004.1.1.15	String	read-only	Cpu in system
STR systemStatusCpuUser	1.3.6.1.4.1.9.9.1004.1.1.14	String	read-only	Cpu in user space
STR systemStatusDiskAvail	1.3.6.1.4.1.9.9.1004.1.1.25	String	read-only	Available disk
C64 systemStatusDiskAvailBytes	1.3.6.1.4.1.9.9.1004.1.1.29	Counter64	read-only	Available disk bytes
C64 systemStatusDiskBavail	1.3.6.1.4.1.9.9.1004.1.1.104	Counter64	read-only	Available disk blocks
C64 systemStatusDiskBlocks	1.3.6.1.4.1.9.9.1004.1.1.102	Counter64	read-only	Number of disk blocks
C64 systemStatusDiskBsize	1.3.6.1.4.1.9.9.1004.1.1.101	Counter64	read-only	Disk block size
C64 systemStatusDiskBused	1.3.6.1.4.1.9.9.1004.1.1.103	Counter64	read-only	Used disk blocks
STR systemStatusDiskFs	1.3.6.1.4.1.9.9.1004.1.1.22	String	read-only	Disk fs
STR systemStatusDiskMount	1.3.6.1.4.1.9.9.1004.1.1.30	String	read-only	Disk mount
STR systemStatusDiskSize	1.3.6.1.4.1.9.9.1004.1.1.23	String	read-only	Disk size
STR systemStatusDiskStatus	1.3.6.1.4.1.9.9.1004.1.1.5	String	read-only	Disk status
C64 systemStatusDiskTotalBytes	1.3.6.1.4.1.9.9.1004.1.1.27	Counter64	read-only	Total disk bytes
C64 systemStatusDiskUse	1.3.6.1.4.1.9.9.1004.1.1.26	Counter64	read-only	Disk use
STR systemStatusDiskUsed	1.3.6.1.4.1.9.9.1004.1.1.24	String	read-only	Disk used
C64 systemStatusDiskUsedBytes	1.3.6.1.4.1.9.9.1004.1.1.28	Counter64	read-only	Used disk bytes
U32 systemStatusFpCpuCount	1.3.6.1.4.1.9.9.1004.1.1.50	Unsigned32	read-only	FP cpu count
STR systemStatusInstallerDiskAvail	1.3.6.1.4.1.9.9.1004.1.1.68	String	read-only	Available installer disk
STR systemStatusInstallerDiskFs	1.3.6.1.4.1.9.9.1004.1.1.65	String	read-only	Installer disk fs
STR systemStatusInstallerDiskMount	1.3.6.1.4.1.9.9.1004.1.1.70	String	read-only	Installer disk mount
STR systemStatusInstallerDiskSize	1.3.6.1.4.1.9.9.1004.1.1.66	String	read-only	Installer disk size
C64 systemStatusInstallerDiskUse	1.3.6.1.4.1.9.9.1004.1.1.69	Counter64	read-only	Installer disk use
STR systemStatusInstallerDiskUsed	1.3.6.1.4.1.9.9.1004.1.1.67	String	read-only	Used installer disk
U32 systemStatusLinuxCpuCount	1.3.6.1.4.1.9.9.1004.1.1.51	Unsigned32	read-only	Linux CPU count
C64 systemStatusMemBuffers	1.3.6.1.4.1.9.9.1004.1.1.20	Counter64	read-only	Memory used for buffers
C64 systemStatusMemCached	1.3.6.1.4.1.9.9.1004.1.1.21	Counter64	read-only	Cached memory
C64 systemStatusMemFree	1.3.6.1.4.1.9.9.1004.1.1.19	Counter64	read-only	Free memory
C64 systemStatusMemTotal	1.3.6.1.4.1.9.9.1004.1.1.17	Counter64	read-only	Total memory
C64 systemStatusMemUsed	1.3.6.1.4.1.9.9.1004.1.1.18	Counter64	read-only	Used memory
STR systemStatusMin15Avg	1.3.6.1.4.1.9.9.1004.1.1.11	String	read-only	15 minute average
STR systemStatusMin1Avg	1.3.6.1.4.1.9.9.1004.1.1.9	String	read-only	1 minute average
STR systemStatusMin5Avg	1.3.6.1.4.1.9.9.1004.1.1.10	String	read-only	5 minute average
INT systemStatusModel	1.3.6.1.4.1.9.9.1004.1.1.47	INTEGER	read-only	Device model type
STR systemStatusPersonality	1.3.6.1.4.1.9.9.1004.1.1.1	String	read-only	Device type
U32 systemStatusProcs	1.3.6.1.4.1.9.9.1004.1.1.100	Unsigned32	read-only	Number of processes
STR systemStatusProductId	1.3.6.1.4.1.9.9.1004.1.1.71	String	read-only	Product id
U32 systemStatusPseudoConfirmCommit	1.3.6.1.4.1.9.9.1004.1.1.37	Unsigned32	read-only	Only valid for vmanage .. is always hidden
STR systemStatusRebootReason	1.3.6.1.4.1.9.9.1004.1.1.6	String	read-only	Reboot reason
STR systemStatusRebootType	1.3.6.1.4.1.9.9.1004.1.1.48	String	read-only	System reboot type
STR systemStatusServices	1.3.6.1.4.1.9.9.1004.1.1.31	String	read-only	Services
INT systemStatusState	1.3.6.1.4.1.9.9.1004.1.1.54	INTEGER	read-only	State
STR systemStatusSystemChassisSerialNumber	1.3.6.1.4.1.9.9.1004.1.1.64	String	read-only	Chassis serial number
STR systemStatusSystemCtrlCompatibility	1.3.6.1.4.1.9.9.1004.1.1.60	String	read-only	Control compatibility
INT systemStatusSystemFipsMode	1.3.6.1.4.1.9.9.1004.1.1.58	INTEGER	read-only	Fips mode
U32 systemStatusSystemLiLicenseEnabled	1.3.6.1.4.1.9.9.1004.1.1.63	Unsigned32	read-only	Li license enabled
STR systemStatusSystemStateDescription	1.3.6.1.4.1.9.9.1004.1.1.55	String	read-only	State description
STR systemStatusSystemTimezone	1.3.6.1.4.1.9.9.1004.1.1.61	String	read-only	Time zone
U32 systemStatusTotalCpuCount	1.3.6.1.4.1.9.9.1004.1.1.49	Unsigned32	read-only	Total CPU count
STR systemStatusUptime	1.3.6.1.4.1.9.9.1004.1.1.8	String	read-only	System up time
STR systemStatusVersion	1.3.6.1.4.1.9.9.1004.1.1.2	String	read-only	Version
T/F systemStatusVmanaged	1.3.6.1.4.1.9.9.1004.1.1.36	TruthValue	read-only	Device is managed by the vmanage

RFC description

Cisco SD-WAN operational system data model for monitoring system operation and configuration.

Start monitoring Cisco SD-WAN routers/controllers/appliances with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-SDWAN-OPER-SYSTEM-MIB

What Is CISCO-SDWAN-OPER-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description