CISCO-NTP-MIB

All MIBs › CISCO-NTP-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2006-07-31

Category: Cisco Devices, Device Management

Description: Monitors NTP time synchronization status and configuration on Cisco devices, providing information about NTP peers and clock accuracy.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring CISCO-NTP-MIB with a free 30-day trial of IPNetwork Monitor.

What Is CISCO-NTP-MIB?

CISCO-NTP-MIB is a Cisco Systems, Inc. proprietary MIB (derived from the University of Delaware's TR 98-09 NTP management model) monitoring an NTP server's synchronization state. Its objects cover system leap-indicator, stratum, precision, root delay/dispersion, reference ID/time, poll interval, current peer and clock, server status, and a peers-variable table (association ID, configured flag, peer/host address and port, leap indicator, mode, stratum, peer/host poll interval, precision). As a status/performance MIB it lets an administrator confirm which NTP peer a Cisco device is synchronized to and its clock stratum/precision. It is deployed on Cisco Systems network equipment (NTP time synchronization). Engineers can download the CISCO-NTP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-NTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Systems network equipment (NTP time synchronization)

Monitoring Examples

An administrator checks cntpSysStratum and cntpSysPeer to confirm which NTP server a Cisco device is synchronized to and how accurate its clock is.

What Can Be Monitored

NTP synchronization stratum, peer state, and clock precision

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cntpPeersFilterValidEntries OID:

Select a Cisco network equipment (NTP time synchronization) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cntpPeersFilterValidEntries into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of valid entries for a peer in the Filter Register Table. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoNtpMIB	1.3.6.1.4.1.9.9.168			This MIB module defines a MIB which provides mechanisms to monitor an NTP server. The MIB is derived from the Technical Report #Management of the NTP with SNMP# TR No. 98-09 authored by A.S. Sethi and Dave Mills in the University of Delaware. Below is a brief overview of NTP system architecture and implementation model. This will help understand the objects defined below and their relationships. NTP Intro: The Network Time Protocol (NTP) Version 3, is used to synchronize timekeeping among a set of distributed time servers and clients. The service model is based on a returnable-time design which depends only on measured clock offsets, but does not require reliable message delivery. The synchronization subnet uses a self-organizing, hierarchical master-slave configuration, with synchronization paths determined by a minimum-weight spanning tree. While multiple masters (primary servers) may exist, there is no requirement for an election protocol. System Archiecture: In the NTP model a number of primary reference sources, synchronized by wire or radio to national standards, are connected to widely accessible resources, such as backbone gateways, and operated as primary time servers. The purpose of NTP is to convey timekeeping information from these servers to other time servers via the Internet and also to cross-check clocks and mitigate errors due to equipment or propagation failures. Some number of local-net hosts or gateways, acting as secondary time servers, run NTP with one or more of the primary servers. In order to reduce the protocol overhead, the secondary servers distribute time via NTP to the remaining local-net hosts. In the interest of reliability, selected hosts can be equipped with less accurate but less expensive radio clocks and used for backup in case of failure of the primary and/or secondary servers or communication paths between them. NTP is designed to produce three products: clock offset, round-trip delay and dispersion, all of which are relative to a selected reference clock. Clock offset represents the amount to adjust the local clock to bring it into correspondence with the reference clock. Roundtrip delay provides the capability to launch a message to arrive at the reference clock at a specified time. Dispersion represents the maximum error of the local clock relative to the reference clock. Since most host time servers will synchronize via another peer time server, there are two components in each of these three products, those determined by the peer relative to the primary reference source of standard time and those measured by the host relative to the peer. Each of these components are maintained separately in the protocol in order to facilitate error control and management of the subnet itself. They provide not only precision measurements of offset and delay, but also definitive maximum error bounds, so that the user interface can determine not only the time, but the quality of the time as well. Implementation Model: In what may be the most common client/server model a client sends an NTP message to one or more servers and processes the replies as received. The server interchanges addresses and ports, overwrites certain fields in the message, recalculates the checksum and returns the message immediately. Information included in the NTP message allows the client to determine the server time with respect to local time and adjust the local clock accordingly. In addition, the message includes information to calculate the expected timekeeping accuracy and reliability, as well as select the best from possibly several servers. While the client/server model may suffice for use on local nets involving a public server and perhaps many workstation clients, the full generality of NTP requires distributed participation of a number of client/servers or peers arranged in a dynamically reconfigurable, hierarchically distributed configuration. It also requires sophisticated algorithms for association management, data manipulation and local-clock control. Glossary: 1. Host: Refers to an instantiation of the NTP protocol on a local processor. 2. Peer: Refers to an instantiation of the NTP protocol on a remote processor connected by a network path from the local host.
ciscoNtpMIBNotifs	1.3.6.1.4.1.9.9.168.0
NTF ciscoNtpSrvStatusChange	1.3.6.1.4.1.9.9.168.0.1			This notification is generated whenever the value of cntpSysSrvStatus changes.
NTF ciscoNtpHighPriorityConnFailure	1.3.6.1.4.1.9.9.168.0.2			A failure to connect with an high priority NTP server (e.g. a server at the lowest stratum) is detected.
NTF ciscoNtpHighPriorityConnRestore	1.3.6.1.4.1.9.9.168.0.3			A connection with an high priority NTP server (e.g. a server at the lowest stratum) is restored.
NTF ciscoNtpGeneralConnFailure	1.3.6.1.4.1.9.9.168.0.4			This trap is sent when the device loses connectivity to all NTP servers.
NTF ciscoNtpGeneralConnRestore	1.3.6.1.4.1.9.9.168.0.5			This trap is sent when the connection with at least one NTP server has been restored (e.g. after a ciscoNtpGeneralConnFailure).
ciscoNtpMIBObjects	1.3.6.1.4.1.9.9.168.1
cntpSystem	1.3.6.1.4.1.9.9.168.1.1
NTP cntpSysLeap	1.3.6.1.4.1.9.9.168.1.1.1	NTPLeapIndicator	read-write	Two-bit code warning of an impending leap second to be inserted in the NTP timescale. This object can be set only when the cntpSysStratum has a value of 1.
NTP cntpSysStratum	1.3.6.1.4.1.9.9.168.1.1.2	NTPStratum	read-write	The stratum of the local clock. If the value is set to 1, i.e., this is a primary reference, then the Primary-Clock procedure described in Section 3.4.6, in RFC-1305 is invoked.
I32 cntpSysPrecision	1.3.6.1.4.1.9.9.168.1.1.3	Integer32	read-only	Signed integer indicating the precision of the system clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67 ms) power-frequency clock would be assigned the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled clock would be assigned the value -9 (1.95 ms).
NTP cntpSysRootDelay	1.3.6.1.4.1.9.9.168.1.1.4	NTPSignedTimeValue	read-only	A signed fixed-point number indicating the total round-trip delay in seconds, to the primary reference source at the root of the synchronization subnet.
NTP cntpSysRootDispersion	1.3.6.1.4.1.9.9.168.1.1.5	NTPUnsignedTimeValue	read-only	The maximum error in seconds, relative to the primary reference source at the root of the synchronization subnet. Only positive values greater than zero are possible.
NTP cntpSysRefId	1.3.6.1.4.1.9.9.168.1.1.6	NTPRefId	read-only	The reference identifier of the local clock.
NTP cntpSysRefTime	1.3.6.1.4.1.9.9.168.1.1.7	NTPTimeStamp	read-only	The local time when the local clock was last updated. If the local clock has never been synchronized, the value is zero.
NUM cntpSysPoll	1.3.6.1.4.1.9.9.168.1.1.8	NTPPollInterval	read-only	The interval at which the NTP server polls other NTP servers to synchronize its clock.
OID cntpSysPeer	1.3.6.1.4.1.9.9.168.1.1.9	NTPAssocIdentifier	read-only	The current synchronization source. This will contain the unique association identifier cntpPeersAssocId of the corresponding peer entry in the cntpPeersVarTable of the peer acting as the synchronization source. If there is no peer, the value will be 0.
NTP cntpSysClock	1.3.6.1.4.1.9.9.168.1.1.10	NTPTimeStamp	read-only	The current local time. Local time is derived from the hardware clock of the particular machine and increments at intervals depending on the design used.
INT cntpSysSrvStatus	1.3.6.1.4.1.9.9.168.1.1.11	INTEGER	read-only	Current state of the NTP server with values coded as follows: 1: server status is unknown 2: server is not running 3: server is not synchronized to any time source 4: server is synchronized to its own local clock 5: server is synchronized to a local hardware refclock (e.g. GPS) 6: server is synchronized to a remote NTP server
cntpPeers	1.3.6.1.4.1.9.9.168.1.2
cntpPeersVarTable	1.3.6.1.4.1.9.9.168.1.2.1		not-accessible	This table provides information on the peers with which the local NTP server has associations. The peers are also NTP servers but running on different hosts.
cntpPeersVarEntry	1.3.6.1.4.1.9.9.168.1.2.1.1		not-accessible	Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier. Entries are automatically created when the user configures the NTP server to be associated with remote peers. Similarly entries are deleted when the user removes the peer association from the NTP server. Entries can also be created by the management station by setting values for the following objects: cntpPeersPeerAddress or cntpPeersPeerName, cntpPeersHostAddress and cntpPeersMode and making the cntpPeersEntryStatus as active(1). At the least, the management station has to set a value for cntpPeersPeerAddress or cntpPeersPeerName to make the row active.
OID cntpPeersAssocId	1.3.6.1.4.1.9.9.168.1.2.1.1.1	NTPAssocIdentifier	not-accessible	An integer value greater than 0 that uniquely identifies a peer with which the local NTP server is associated.
T/F cntpPeersConfigured	1.3.6.1.4.1.9.9.168.1.2.1.1.2	TruthValue	read-only	This is a bit indicating that the association was created from configuration information and should not be de-associated even if the peer becomes unreachable.
IP cntpPeersPeerAddress	1.3.6.1.4.1.9.9.168.1.2.1.1.3	IpAddress	read-create	The IP address of the peer. When creating a new association, a value should be set either for this object or the corresponding instance of cntpPeersPeerName, before the row is made active.
I32 cntpPeersPeerPort	1.3.6.1.4.1.9.9.168.1.2.1.1.4	Integer32	read-only	The UDP port number on which the peer receives NTP messages.
IP cntpPeersHostAddress	1.3.6.1.4.1.9.9.168.1.2.1.1.5	IpAddress	read-create	The IP address of the local host. Multi-homing can be supported using this object.
I32 cntpPeersHostPort	1.3.6.1.4.1.9.9.168.1.2.1.1.6	Integer32	read-only	The UDP port number on which the local host receives NTP messages.
NTP cntpPeersLeap	1.3.6.1.4.1.9.9.168.1.2.1.1.7	NTPLeapIndicator	read-only	Two-bit code warning of an impending leap second to be inserted in the NTP timescale of the peer.
INT cntpPeersMode	1.3.6.1.4.1.9.9.168.1.2.1.1.8	INTEGER	read-create	The association mode of the NTP server, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends periodic messages regardless of the reachability state or stratum of its peer. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer 2, symmetric passive - This type of association is ordinarily created upon arrival of a message from a peer operating in the symmetric active mode and persists only as long as the peer is reachable and operating at a stratum level less than or equal to the host; otherwise, the association is dissolved. However, the association will always persist until at least one message has been sent in reply. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer 3, client - A host operating in this mode sends periodic messages regardless of the reachability state or stratum of its peer. By operating in this mode the host, usually a LAN workstation, announces its willingness to be synchronized by, but not to synchronize the peer 4, server - This type of association is ordinarily created upon arrival of a client request message and exists only in order to reply to that request, after which the association is dissolved. By operating in this mode the host, usually a LAN time server, announces its willingness to synchronize, but not to be synchronized by the peer 5, broadcast - A host operating in this mode sends periodic messages regardless of the reachability state or stratum of the peers. By operating in this mode the host, usually a LAN time server operating on a high-speed broadcast medium, announces its willingness to synchronize all of the peers, but not to be synchronized by any of them 6, reserved for NTP control messages 7, reserved for private use. When creating a new peer association, if no value is specified for this object, it defaults to symmetricActive(1).
NTP cntpPeersStratum	1.3.6.1.4.1.9.9.168.1.2.1.1.9	NTPStratum	read-only	The stratum of the peer clock.
NUM cntpPeersPeerPoll	1.3.6.1.4.1.9.9.168.1.2.1.1.10	NTPPollInterval	read-only	The interval at which the peer polls the local host.
NUM cntpPeersHostPoll	1.3.6.1.4.1.9.9.168.1.2.1.1.11	NTPPollInterval	read-only	The interval at which the local host polls the peer.
I32 cntpPeersPrecision	1.3.6.1.4.1.9.9.168.1.2.1.1.12	Integer32	read-only	Signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67 ms) power-frequency clock would be assigned the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled clock would be assigned the value -9 (1.95 ms).
NTP cntpPeersRootDelay	1.3.6.1.4.1.9.9.168.1.2.1.1.13	NTPSignedTimeValue	read-only	A signed fixed-point number indicating the total round-trip delay in seconds, from the peer to the primary reference source at the root of the synchronization subnet.
NTP cntpPeersRootDispersion	1.3.6.1.4.1.9.9.168.1.2.1.1.14	NTPUnsignedTimeValue	read-only	The maximum error in seconds, of the peer clock relative to the primary reference source at the root of the synchronization subnet. Only positive values greater than zero are possible.
NTP cntpPeersRefId	1.3.6.1.4.1.9.9.168.1.2.1.1.15	NTPRefId	read-only	The reference identifier of the peer.
NTP cntpPeersRefTime	1.3.6.1.4.1.9.9.168.1.2.1.1.16	NTPTimeStamp	read-only	The local time at the peer when its clock was last updated. If the peer clock has never been synchronized, the value is zero.
NTP cntpPeersOrgTime	1.3.6.1.4.1.9.9.168.1.2.1.1.17	NTPTimeStamp	read-only	The local time at the peer, when its latest NTP message was sent. If the peer becomes unreachable the value is set to zero.
NTP cntpPeersReceiveTime	1.3.6.1.4.1.9.9.168.1.2.1.1.18	NTPTimeStamp	read-only	The local time, when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero.
NTP cntpPeersTransmitTime	1.3.6.1.4.1.9.9.168.1.2.1.1.19	NTPTimeStamp	read-only	The local time at which the NTP message departed the sender.
I32 cntpPeersUpdateTime	1.3.6.1.4.1.9.9.168.1.2.1.1.20	Integer32	read-only	The local time, when the most recent NTP message was received from the peer that was used to calculate the skew dispersion. This represents only the 32-bit integer part of the NTPTimestamp.
I32 cntpPeersReach	1.3.6.1.4.1.9.9.168.1.2.1.1.21	Integer32	read-only	A shift register of used to determine the reachability status of the peer, with bits entering from the least significant (rightmost) end. A peer is considered reachable if at least one bit in this register is set to one i.e, if the value of this object is non-zero. The data in the shift register would be populated by the NTP protocol procedures.
I32 cntpPeersTimer	1.3.6.1.4.1.9.9.168.1.2.1.1.22	Integer32	read-only	The interval in seconds, between transmitted NTP messages from the local host to the peer.
NTP cntpPeersOffset	1.3.6.1.4.1.9.9.168.1.2.1.1.23	NTPSignedTimeValue	read-only	The estimated offset of the peer clock relative to the local clock, in seconds. The host determines the value of this object using the NTP clock-filter algorithm.
NTP cntpPeersDelay	1.3.6.1.4.1.9.9.168.1.2.1.1.24	NTPSignedTimeValue	read-only	The estimated round-trip delay of the peer clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the NTP clock-filter algorithm.
NTP cntpPeersDispersion	1.3.6.1.4.1.9.9.168.1.2.1.1.25	NTPUnsignedTimeValue	read-only	The estimated maximum error of the peer clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the NTP clock-filter algorithm.
G32 cntpPeersFilterValidEntriesEx	1.3.6.1.4.1.9.9.168.1.2.1.1.26	Gauge32	read-only	The number of valid entries for a peer in the Filter Register Table. Since, the Filter Register Table is optional, this object will have a value 0 if the Filter Register Table is not implemented.
ROW cntpPeersEntryStatus	1.3.6.1.4.1.9.9.168.1.2.1.1.27	RowStatus	read-create	The status object for this row. When a management station is creating a new row, it should set the value for cntpPeersPeerAddress at least, before the row can be made active(1).
U32 cntpPeersUpdateTimeRev1	1.3.6.1.4.1.9.9.168.1.2.1.1.28	Unsigned32	read-only	The local time, when the most recent NTP message was received from the peer that was used to calculate the skew dispersion. This represents only the 32-bit integer part of the NTPTimestamp.
T/F cntpPeersPrefPeer	1.3.6.1.4.1.9.9.168.1.2.1.1.29	TruthValue	read-create	This object specifies whether this peer is the preferred one over the others. By default, when the value of this object is 'false', NTP chooses the peer with which to synchronize the time on the local system. If this object is set to 'true', NTP will choose the corresponding peer to synchronize the time with. If multiple entries have this object set to 'true', NTP will choose the first one to be set. This object is a means to override the selection of the peer by NTP.
IPt cntpPeersPeerType	1.3.6.1.4.1.9.9.168.1.2.1.1.30	InetAddressType	read-create	Represents the type of the corresponding instance of cntpPeersPeerName object.
IP cntpPeersPeerName	1.3.6.1.4.1.9.9.168.1.2.1.1.31	InetAddress	read-create	The address of the peer. When creating a new association, a value must be set for either this object or the corresponding instance of cntpPeersPeerAddress object, before the row is made active.
cntpFilter	1.3.6.1.4.1.9.9.168.1.3
cntpFilterRegisterTable	1.3.6.1.4.1.9.9.168.1.3.2		not-accessible	The following table contains NTP state variables used by the NTP clock filter and selection algorithms. This table depicts a shift register. Each stage in the shift register is a 3-tuple consisting of the measured clock offset, measured clock delay and measured clock dispersion associated with a single observation. An important factor affecting the accuracy and reliability of time distribution is the complex of algorithms used to reduce the effect of statistical errors and falsetickers due to failure of various subnet components, reference sources or propagation media. The NTP clock-filter and selection algorithms are designed to do exactly this. The objects in the filter register table below are used by these algorthims to minimize the error in the calculated time.
cntpFilterRegisterEntry	1.3.6.1.4.1.9.9.168.1.3.2.1		not-accessible	Each entry corresponds to one stage of the shift register, i.e., one reading of the variables clock delay, clock offset and clock dispersion. Entries are automatically created whenever a peer is configured and deleted when the peer is removed.
I32 cntpFilterIndex	1.3.6.1.4.1.9.9.168.1.3.2.1.1	Integer32	not-accessible	An integer value in the specified range that is used to index into the table. The size of the table is fixed at 8. Each entry identifies a particular reading of the clock filter variables in the shift register. Entries are added starting at index 1. The index wraps back to 1 when it reaches 8. When the index wraps back, the new entries will overwrite the old entries effectively deleting the old entry.
NTP cntpFilterPeersOffset	1.3.6.1.4.1.9.9.168.1.3.2.1.2	NTPSignedTimeValue	read-only	The offset of the peer clock relative to the local clock in seconds.
NTP cntpFilterPeersDelay	1.3.6.1.4.1.9.9.168.1.3.2.1.3	NTPSignedTimeValue	read-only	Round-trip delay of the peer clock relative to the local clock over the network path between them, in seconds. This variable can take on both positive and negative values, depending on clock precision and skew-error accumulation.
NTP cntpFilterPeersDispersion	1.3.6.1.4.1.9.9.168.1.3.2.1.4	NTPUnsignedTimeValue	read-only	The maximum error of the peer clock relative to the local clock over the network path between them, in seconds. Only positive values greater than zero are possible.
ciscoNtpMIBConformance	1.3.6.1.4.1.9.9.168.2
ciscoNtpMIBCompliances	1.3.6.1.4.1.9.9.168.2.1
ciscoNtpMIBCompliance	1.3.6.1.4.1.9.9.168.2.1.1			The compliance statement for Cisco agents which implement the Cisco NTP MIB.
ciscoNtpMIBComplianceRev1	1.3.6.1.4.1.9.9.168.2.1.2			The compliance statement for Cisco agents which implement the Cisco NTP MIB.
ciscoNtpMIBComplianceRev2	1.3.6.1.4.1.9.9.168.2.1.3			The compliance statement for Cisco agents which implement the Cisco NTP MIB.
ciscoNtpMIBComplianceRev3	1.3.6.1.4.1.9.9.168.2.1.4			The compliance statement for Cisco agents which implement the Cisco NTP MIB.
ciscoNtpMIBComplianceRev4	1.3.6.1.4.1.9.9.168.2.1.5			The compliance statement for Cisco agents which implement the Cisco NTP MIB.
ciscoNtpMIBGroups	1.3.6.1.4.1.9.9.168.2.2
ciscoNtpSysGroup	1.3.6.1.4.1.9.9.168.2.2.1			The NTP system variables.
ciscoNtpPeersGroup	1.3.6.1.4.1.9.9.168.2.2.2			The NTP peer variables.
ciscoNtpFilterGroup	1.3.6.1.4.1.9.9.168.2.2.3			The NTP clock-filter variables.
ciscoNtpPeersGroupRev1	1.3.6.1.4.1.9.9.168.2.2.4			The NTP peer variables.
ciscoNtpPeerExtGroup	1.3.6.1.4.1.9.9.168.2.2.5			The extended set of NTP peer variable(s).
ciscoNtpPeersGroupRev2	1.3.6.1.4.1.9.9.168.2.2.6			The NTP peer variables.
ciscoNtpSysExtGroup	1.3.6.1.4.1.9.9.168.2.2.7			The extended set of NTP system variable(s).
ciscoNtpSrvNotifGroup	1.3.6.1.4.1.9.9.168.2.2.8			The collection of notifications for the NTP Server.

RFC description

Cisco vendor-private MIB for Network Time Protocol server monitoring and management, tracking NTP peers, synchronization, and time server status.

Start monitoring Cisco network equipment (NTP time synchronization) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-NTP-MIB