| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoLwappTagsMIB | 1.3.6.1.4.1.9.9.858 | | | This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
Information represented by this MIB is
passed by the controller to those Cisco LWAPP APs, that can
operate in stand-alone mode.
The relationship between CC and the LWAPP APs can be depicted
as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller
and the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity is also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Native VLAN ID
A switch port and/or AP can be configured with a
'native VLAN ID'. Untagged or priority-tagged
frames are implicitly associated with the native
VLAN ID. The default native VLAN ID is '1' if
VLAN tagging is enabled. The native VLAN ID is '0'
or 'no VLAN ID' if VLAN tagging is not enabled.
Remote Edge Access Point ( REAP )
The LWAPP AP that can also act as a stand-alone AP
when it loses communication with the controller
it was associated with.
When REAP can reach the controller (connected state),
it gets help from controller to complete client
authentication. When a controller is not reachable by
REAP, it goes into standalone state and does client
authentication by itself. All data packets from
clients are either bridged locally (local-switch)
or forwarded to the controller (central-switch)
depending on the WLAN configuration.
Virtual LAN
VLAN defined in the IEEE 802.1Q VLAN standard
supports logically segmenting of LAN
infrastructure into different subnets or
workgroups so that packets are switched only
between ports within the same VLAN.
VLAN ID
Each VLAN is identified by a 12-bit 'VLAN ID'.
A VLAN ID of '0' is used to indicate 'no VLAN ID'.
Valid VLAN IDs range from '1' to '4095'.
Home AP
A REAP AP can be installed at end-user home. Home
AP ethernet port will be connected to DSL or cable
modem at home. Home AP will be primed with Controller
IP Address so that it will join with controller.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications |
| ciscoLwappTagsMIBNotifs | 1.3.6.1.4.1.9.9.858.0 | | | |
| ciscoLwappTagsMIBObjects | 1.3.6.1.4.1.9.9.858.1 | | | |
| ciscoLwappPolicyTagConfig | 1.3.6.1.4.1.9.9.858.1.1 | | | |
| cLPolicyTagConfigTable | 1.3.6.1.4.1.9.9.858.1.1.1 | | not-accessible | This table represents the policy tag configuration of
controller. Policy tag is defined as a tag which has a set of
WLAN profile names to policy profile names. Policy tag applied
to an AP decides the list of SSID gets broadcasted. The SSID
properties are defined by both WLAN profile and Policy profile. |
| cLPolicyTagConfigEntry | 1.3.6.1.4.1.9.9.858.1.1.1.1 | | not-accessible | Each entry represents a conceptual row in
cLPolicyTagConfigTable and corresponds to a policy tag in a
controller. |
| STR cLPolicyTagName | 1.3.6.1.4.1.9.9.858.1.1.1.1.1 | SnmpAdminString | not-accessible | This object uniquely identifies an entry in
cLPolicyTagConfigTable. |
| STR cLPolicyTagDescription | 1.3.6.1.4.1.9.9.858.1.1.1.1.2 | SnmpAdminString | read-write | This object is used to specify the description
of the policy tag. |
| ROW cLPolicyTagRowStatus | 1.3.6.1.4.1.9.9.858.1.1.1.1.3 | RowStatus | read-create | This object specifies the row status of the policy
tag table. |
| cLPolicyProfileConfigTable | 1.3.6.1.4.1.9.9.858.1.1.2 | | not-accessible | This table represents the policy profile configuration of
controller. |
| cLPolicyProfileConfigEntry | 1.3.6.1.4.1.9.9.858.1.1.2.1 | | not-accessible | Each entry represents a conceptual row in
CLPolicyProfileConfigEntryTable and corresponds to a
policy tag in controller. |
| STR cLProfileName | 1.3.6.1.4.1.9.9.858.1.1.2.1.1 | SnmpAdminString | not-accessible | This object uniquely identifies the wlan profile configured to
a given policy tag |
| STR cLPolicyProfileName | 1.3.6.1.4.1.9.9.858.1.1.2.1.2 | SnmpAdminString | read-create | This object uniquely identifies the policy profile
name that is mapped to the wlan profile part of this
policy tag. |
| ROW cLPolicyProfileRowStatus | 1.3.6.1.4.1.9.9.858.1.1.2.1.3 | RowStatus | read-create | This object specifies the row status of the policy
tag table. |
| cLRlanPolicyProfileConfigTable | 1.3.6.1.4.1.9.9.858.1.1.3 | | not-accessible | This table represents the mapping of the RLAN-policy
to the policy tag configuration of controller.
Policy tag is defined as a tag which has a
set of WLAN and RLAN profile names attached to policy
profile names. Policy tag, when used/attached to an AP
defines the policy names for RLAN profiles which should be
used by the clients associated to the corresponding RLANs. |
| cLRlanPolicyProfileConfigEntry | 1.3.6.1.4.1.9.9.858.1.1.3.1 | | not-accessible | Each entry represents a conceptual row in
cLRlanPolicyProfileConfigTable and corresponds to a
RLAN policy associated with the given policy tag |
| I32 cLRlanPortID | 1.3.6.1.4.1.9.9.858.1.1.3.1.1 | Integer32 | not-accessible | This object uniquely identifies an entry in
cLRlanPolicyProfileConfigTable. |
| STR cLRlanProfile | 1.3.6.1.4.1.9.9.858.1.1.3.1.2 | SnmpAdminString | not-accessible | This object identifies the RLAN profile associated
with the given cLRlanPortID. |
| STR cLRlanPolicyProfile | 1.3.6.1.4.1.9.9.858.1.1.3.1.3 | SnmpAdminString | read-write | This object uniquely identifies the RLAN policy profile
name that is mapped to the RLAN profile part of this
policy tag. |
| ROW cLRlanPolicyProfileRowStatus | 1.3.6.1.4.1.9.9.858.1.1.3.1.4 | RowStatus | read-write | This object specifies the row status of the
cLRlanPolicyProfileConfigTable table. |
| ciscoLwappSiteTagConfig | 1.3.6.1.4.1.9.9.858.1.2 | | | |
| cLSiteTagConfigTable | 1.3.6.1.4.1.9.9.858.1.2.1 | | not-accessible | This table represents the site tag configuration of controller.
Site tag is defined as a tag which has the AP join profile and
the flex profile within it. |
| cLSiteTagConfigEntry | 1.3.6.1.4.1.9.9.858.1.2.1.1 | | not-accessible | Each entry represents a conceptual row in
cLSiteTagConfigTable and corresponds to an site
tag in a controller. |
| STR cLSiteTagName | 1.3.6.1.4.1.9.9.858.1.2.1.1.1 | SnmpAdminString | not-accessible | This object uniquely represent the site tag name. |
| ROW cLSiteTagRowStatus | 1.3.6.1.4.1.9.9.858.1.2.1.1.2 | RowStatus | read-create | This object specifies the row status of the site
tag table. |
| STR cLApJoinProfName | 1.3.6.1.4.1.9.9.858.1.2.1.1.3 | SnmpAdminString | read-write | This object specifies the AP join profile name which is part of
the site tag. |
| STR cLFlexProfName | 1.3.6.1.4.1.9.9.858.1.2.1.1.4 | SnmpAdminString | read-write | This object specifies the flex profile name which is part of
the site tag. |
| STR cLSiteTagDescription | 1.3.6.1.4.1.9.9.858.1.2.1.1.5 | SnmpAdminString | read-write | This object specifies the description of the site tag. |
| INT cLReapSiteUpgradeStart | 1.3.6.1.4.1.9.9.858.1.2.1.1.6 | INTEGER | read-write | This object specifies the efficient AP image upgrade for the
heap group.
initiatePrimary - Efficient AP image upgrade for heap group
is done with primary
initiateBackup - Efficient AP image upgrade for heap group is
done with backup
abort - Efficient AP image upgrade for heap group is aborted. |
| T/F cLReapSiteTagStartCertificateDownload | 1.3.6.1.4.1.9.9.858.1.2.1.1.7 | TruthValue | read-write | This object specifies whether certificate for
EAP-TLS is enabled.
A value of 'true' indicates that EAP-TLS is enabled.
A value of 'false' indicates that EAP-TLS is disabled. |
| T/F cLIsLocalSite | 1.3.6.1.4.1.9.9.858.1.2.1.1.8 | TruthValue | read-write | This object specifies whether local site is enabled or not.
A value of 'true' indicates that local site is enabled.
A value of 'false' indicates that local site is disabled. |
| ciscoLwappRfTagConfig | 1.3.6.1.4.1.9.9.858.1.3 | | | |
| cLRfTagConfigTable | 1.3.6.1.4.1.9.9.858.1.3.1 | | not-accessible | This table represents the RF tag configuration of controller.
RF tag is defined as a tag which has a couple of RF profiles
attached to it corresponding to 11z and 11b/g radios. |
| cLRfTagConfigEntry | 1.3.6.1.4.1.9.9.858.1.3.1.1 | | not-accessible | Each entry represents a conceptual row in cLRFTagConfigTable
and corresponds to an RF tag in a Controller. |
| STR cLRfTagName | 1.3.6.1.4.1.9.9.858.1.3.1.1.1 | SnmpAdminString | not-accessible | This object uniquely identifies an RF tag entry in
cLRFTagConfigTable. |
| ROW cLRfTagRowStatus | 1.3.6.1.4.1.9.9.858.1.3.1.1.2 | RowStatus | read-create | This object specifies the row status of the RF
tag table. |
| STR cL11aRfProfName | 1.3.6.1.4.1.9.9.858.1.3.1.1.3 | SnmpAdminString | read-create | This object identifies the 802.11a RF profile configured under
RF tag. |
| STR cL11bRfProfName | 1.3.6.1.4.1.9.9.858.1.3.1.1.4 | SnmpAdminString | read-write | This object specifies the 802.11b RF profile configured under
RF tag. |
| STR cLRfTagDescription | 1.3.6.1.4.1.9.9.858.1.3.1.1.5 | SnmpAdminString | read-write | This object specifies the description
of the RF tag. |
| ciscoLwappApTag | 1.3.6.1.4.1.9.9.858.1.4 | | | |
| cLApConfigTagTable | 1.3.6.1.4.1.9.9.858.1.4.1 | | not-accessible | This table provides the mapping of AP to the various tags. |
| cLApConfigTagEntry | 1.3.6.1.4.1.9.9.858.1.4.1.1 | | not-accessible | Each entry in this table provides information about the tags
that the AP is mapped to. |
| MAC cLApConfigTagSysMacAddress | 1.3.6.1.4.1.9.9.858.1.4.1.1.1 | MacAddress | not-accessible | This object specifies the ethernet MAC of the AP and uniquely
identifies an entry in this table. |
| STR cLApConfigPolicyTagName | 1.3.6.1.4.1.9.9.858.1.4.1.1.2 | SnmpAdminString | read-write | This object specifies the policy tag that is configured for a
particular AP with cLApTagSysMacAddress as its ethernet mac. |
| STR cLApConfigRfTagName | 1.3.6.1.4.1.9.9.858.1.4.1.1.3 | SnmpAdminString | read-write | This object specifies the RF tag that is configured for a
particular AP with cLApTagSysMacAddress as its ethernet mac. |
| STR cLApConfigSiteTagName | 1.3.6.1.4.1.9.9.858.1.4.1.1.4 | SnmpAdminString | read-write | This object specifies the site tag that is configured a
particular AP with cLApTagSysMacAddress as its ethernet mac. |
| ROW cLApConfigTagRowStatus | 1.3.6.1.4.1.9.9.858.1.4.1.1.5 | RowStatus | read-create | This object specifies the row status of the site tag table. |
| cLApTagSrcTable | 1.3.6.1.4.1.9.9.858.1.4.2 | | not-accessible | This table provides the details on various AP filter source
configuration. |
| cLApTagSrcEntry | 1.3.6.1.4.1.9.9.858.1.4.2.1 | | not-accessible | Each entry in this table provides information about the AP
filter priority source config. |
| I32 cLApTagSrcPriority | 1.3.6.1.4.1.9.9.858.1.4.2.1.1 | Integer32 | not-accessible | This object specifies the priority given to the AP filter
tag source. |
| ROW cLApTagSrcRowStatus | 1.3.6.1.4.1.9.9.858.1.4.2.1.2 | RowStatus | read-create | This object specifies the row status of the AP filter
tag source table. |
| INT cLApTagSrcList | 1.3.6.1.4.1.9.9.858.1.4.2.1.3 | INTEGER | read-create | This object specifies the list sources for AP tags.
none - Invalid
static - per AP static configuration
filter - The tag details for the AP is taken from
the active filter.
ap - tags received from AP during AP join.
default - default tags.
location - tags configured under user defined Location
construct. |
| ciscoLwappApFilter | 1.3.6.1.4.1.9.9.858.1.5 | | | |
| cLApFilterTable | 1.3.6.1.4.1.9.9.858.1.5.1 | | not-accessible | This table provides the various AP filter config. |
| cLApFilterEntry | 1.3.6.1.4.1.9.9.858.1.5.1.1 | | not-accessible | Each entry in this table provides information about the AP
filter config. |
| STR cLApFilterName | 1.3.6.1.4.1.9.9.858.1.5.1.1.1 | SnmpAdminString | not-accessible | This object specifies the name given to the AP filter
configured to uniquely identify the filter. |
| ROW cLApFilterRowStatus | 1.3.6.1.4.1.9.9.858.1.5.1.1.2 | RowStatus | read-create | This object specifies the row status of the AP filter table. |
| STR cLApFilterNameApNameRule | 1.3.6.1.4.1.9.9.858.1.5.1.1.3 | SnmpAdminString | read-write | This object specifies AP name string based on which AP filter
is configured. |
| STR cLApFilterPolicyTag | 1.3.6.1.4.1.9.9.858.1.5.1.1.4 | SnmpAdminString | read-write | This object specifies policy tag details for AP filter
configured. |
| STR cLApFilterSiteTag | 1.3.6.1.4.1.9.9.858.1.5.1.1.5 | SnmpAdminString | read-write | This object specifies site tag details for AP filter
configured. |
| STR cLApFilterRfTag | 1.3.6.1.4.1.9.9.858.1.5.1.1.6 | SnmpAdminString | read-write | This object specifies RF tag details for AP filter
configured. |
| cLApFilterPriorityTable | 1.3.6.1.4.1.9.9.858.1.5.2 | | not-accessible | This table provides the various AP filter config. |
| cLApFilterPriorityEntry | 1.3.6.1.4.1.9.9.858.1.5.2.1 | | not-accessible | Each entry in this table provides information about the AP
filter priority config. |
| I32 cLApFilterPriority | 1.3.6.1.4.1.9.9.858.1.5.2.1.1 | Integer32 | not-accessible | This object specifies the priority given to the AP filter
that is configured uniquely. |
| ROW cLApFilterPriorityRowStatus | 1.3.6.1.4.1.9.9.858.1.5.2.1.2 | RowStatus | read-create | This object specifies the row status of the AP filter
priority table. |
| STR cLApFilterPriorityFilterName | 1.3.6.1.4.1.9.9.858.1.5.2.1.3 | SnmpAdminString | read-write | This object specifies AP name for which the priority
is been set. |
| ciscoLwappTagsMIBConform | 1.3.6.1.4.1.9.9.858.2 | | | |
| ciscoLwappTagsMIBCompliances | 1.3.6.1.4.1.9.9.858.2.1 | | | |
| ciscoLwappTagsMIBCompliance | 1.3.6.1.4.1.9.9.858.2.1.1 | | | The compliance statement for the SNMP entities that
implement the ciscoLwappTagsMIB module. |
| ciscoLwappTagsMIBGroups | 1.3.6.1.4.1.9.9.858.2.2 | | | |
| ciscoLwappTagsConfigGroup | 1.3.6.1.4.1.9.9.858.2.2.1 | | | This collection of objects represent the Policy tags
configuration. |
| ciscoLwappFilterConfigGroup | 1.3.6.1.4.1.9.9.858.2.2.2 | | | This collection of objects represent the AP filter
configuration. |
| ciscoLwappRlanConfigGroup | 1.3.6.1.4.1.9.9.858.2.2.3 | | | This collection of objects represent the Rlan policy
configuration. |
