CISCO-SP-MIB

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBs › CISCO-SP-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2006-01-16

Category: Cisco Devices, Quality of Service

Description: Manages service policy attachment and statistics for traffic classification and conditioning on Cisco interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-SP-MIB?

CISCO-SP-MIB is a Cisco Systems, Inc. proprietary MIB managing the SS7 Signalling Point (SP) implemented in the Cisco IOS SS7 offload product, per ITU-T Q.700/Q.701. Its objects cover the SS7 protocol variant, point code, and a large set of MTP2 (T01-T08) and MTP3 (T01-T15) protocol timer values governing link and network-layer signaling behavior. As a configuration MIB it lets an administrator confirm SS7 MTP2/MTP3 timer settings on a Cisco IOS SS7 offload signaling point. It is deployed on Cisco IOS SS7 offload platforms. Engineers can download the CISCO-SP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-SP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Cisco IOS SS7 offload platforms

Monitoring Examples

An administrator checks cSpMtp3T01 and cSpPointCode to confirm SS7 MTP3 timer and point-code configuration on a Cisco IOS SS7 offload platform.

What Can Be Monitored

  • SS7 MTP2/MTP3 timer configuration

This MIB depends on

Related MIBs

Imported Objects

From CISCO-SMI

ciscoExperimentOBJECT-IDENTITY

From CISCO-TC

InterfaceIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using cSpLinksetPacketsSent OID:

Select a Cisco IOS SS7 offload platform as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cSpLinksetPacketsSent into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of packets(message signal units) transmitted by this linkset(Q752/3.3). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in packets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Manages SS7 Signalling Point (SP) infrastructure including point codes, linksets, and statistics in Cisco IOS.

Start monitoring Cisco IOS SS7 offload platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-SP-MIB