CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB

Organization: Cisco Systems Inc.

Last Updated: 2003-11-02

Category: Cisco Devices, Wireless and WLAN

Description: Manages context services coordination on Cisco wireless LAN controllers, overseeing client roaming context distribution.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB?

CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB is a Cisco-proprietary MIB for IEEE 802.11 wireless LAN management devices (Access Points and Wireless Bridges) that participate in Cisco's WLCCP (Wireless LAN Context Control Protocol) context-management hierarchy involving Wireless Domain Services (WDS) and Wireless Network Services (WNS). Its single table, cDot11CsMgrClientTable (indexed by cDot11CsMgrClntModuleIndex), tracks each 802.11 station currently managed by the device, recording the address of its parent WDS entity (cDot11CsMgrClntParentWdsAddr), the root node address (cDot11CsMgrClntRootNodeAddr), the mobile-node authenticator address (cDot11CsMgrClntMnAuthenAddr), an operational mode, registration lifetime, and a counter of state transitions. This data is useful for verifying that wireless stations are correctly registered with their parent WDS/WNS hierarchy and for diagnosing failed or flapping roaming-context handoffs between access points in a campus wireless network. It depends on the broader WLCCP context-services framework (including the related CISCO-CONTEXT-SERVICES-CLIENT-MIB on client-side stations) and is deployed on Cisco autonomous/lightweight access points and wireless bridges acting as context-services managers. Administrators can download the CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB file to load it into their MIB browser for that purpose.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Cisco Aironet Access Points and Wireless Bridges participating in WLCCP context services (WDS/WNS roles)

Monitoring Examples

An operator polls cDot11CsMgrClientTable for a given station and checks cDot11CsMgrClntStateTransitions alongside cDot11CsMgrClntOperMode; an unexpectedly high or rapidly increasing state-transition count combined with a non-registered operational mode would indicate the station is repeatedly failing to complete secure context transfer with its parent WDS entity, a sign of roaming instability.

What Can Be Monitored

  • managed 802.11 client/station table entries
  • parent WDS entity address per client
  • root node and mobile-node authenticator addresses
  • client operational mode
  • registration lifetime
  • state transition counters
Imported Objects

From CISCO-SMI

ciscoMgmtOBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION
TimeInterval

How to Use in IPNetwork Monitor

Example using cDot11CsMgrClntStateTransitions OID:

Select a Cisco Aironet access point or wireless bridge (WLCCP) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cDot11CsMgrClntStateTransitions into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object counts the number of times the 802.11 station has transitioned between the infrastructure and distributed modes since the last reboot. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Cisco 802.11 context services manager MIB for managing wireless LAN contexts and services on Cisco Wi-Fi controllers and access points.

Start monitoring Cisco Aironet Access Points and Wireless Bridges (WLCCP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB