CISCO-PROXY-CONTROL-MIB

All MIBs › CISCO-PROXY-CONTROL-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2009-02-11

Category: Cisco Devices, Telephony and VoIP

Description: Manages proxy control configuration for media relay and application-layer gateway on Cisco voice platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-PROXY-CONTROL-MIB?

CISCO-PROXY-CONTROL-MIB extends the IETF Dial Control MIB (RFC 2128) to provide proxy management information for Cisco voice/video gateway platforms acting as media relays or application-layer gateways for protocols like H.323/T.120. It exposes both active and historical call data, including remote IP address, negotiated audio/video/T.120 UDP or TCP ports, connection identifiers, and remote endpoint type/vendor. It supports monitoring the software/call-handling status of the proxy — cProxyCallActiveTable entries reveal how many calls are currently relayed and their negotiated media ports, letting an admin spot stuck or abnormally long-lived calls, port-negotiation failures, or interoperability issues tied to a particular cProxyCallActiveEndpointVendor. It explicitly builds on and extends the IETF Dial Control MIB, so it should be read together with that standard for full call-control context. It is typically deployed on Cisco voice/video gateway or proxy platforms handling audio/video conferencing traffic (codecs referenced include GSM, AMR-NB, iLBC, and iSAC). Engineers can download the CISCO-PROXY-CONTROL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-PROXY-CONTROL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco voice/video proxy and media-relay gateways

Monitoring Examples

An operator would poll cProxyCallActiveTable/cProxyCallActiveEntry for cProxyCallActiveConnectionId and cProxyCallActiveRemoteIPAddress to enumerate currently relayed calls, then check cProxyCallActiveAudioUDPPort and cProxyCallActiveVideoUDPPort to confirm media ports were successfully negotiated. A call stuck without valid cProxyCallActiveT120TCPPort1-4 values might indicate a T.120 data-conferencing negotiation failure. cProxyCallActiveEndpointType and cProxyCallActiveEndpointVendor help identify whether failures cluster around a specific remote endpoint vendor, useful for interoperability troubleshooting; cProxyCallHistory provides the equivalent data for completed calls.

What Can Be Monitored

active call count and connection IDs
remote endpoint IP address
negotiated audio/video UDP ports
T.120 data-conferencing TCP ports
remote endpoint type and vendor
historical call records

Imported Objects

From CISCO-DIAL-CONTROL-MIB

cCallHistoryIndex

OBJECT-TYPE

From CISCO-SMI

ciscoExperiment

OBJECT-IDENTITY

From CISCO-VOICE-COMMON-DIAL-CONTROL-MIB

CvcGUid

From DIAL-CONTROL-MIB

AbsoluteCounter32
callActiveIndex	OBJECT-TYPE
callActiveSetupTime	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoProxyControlMIB	1.3.6.1.4.1.9.10.57			This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing Proxy management information. * ABBREVIATIONS, ACRONYMS AND SYMBOLS * GSM - Global System for Mobile Communication AMR-NB - Adaptive Multi Rate - Narrow Band iLBC - internet Low Bitrate Codec iSAC - internet Speech Audio Codec
ciscoProxyControlMIBCompliance	1.3.6.1.4.1.9.10.57.3.1.1			The compliance statement for entities which implement the CISCO PROXY CONTROL MIB
ciscoProxyControlMIBCompliances	1.3.6.1.4.1.9.10.57.3.1
ciscoProxyControlMIBConformance	1.3.6.1.4.1.9.10.57.3
ciscoProxyControlMIBGroups	1.3.6.1.4.1.9.10.57.3.2
ciscoProxyControlMIBNotificationPrefix	1.3.6.1.4.1.9.10.57.2
ciscoProxyControlMIBNotifications	1.3.6.1.4.1.9.10.57.2.0
ciscoProxyControlMIBObjects	1.3.6.1.4.1.9.10.57.1
cProxyCallActive	1.3.6.1.4.1.9.10.57.1.1
I32 cProxyCallActiveActualBandwidth	1.3.6.1.4.1.9.10.57.1.1.1.1.12	Integer32	read-only	The actual bandwidth used by the proxied call.
CPR cProxyCallActiveAudioCoderRate	1.3.6.1.4.1.9.10.57.1.1.1.1.13	CProxyAudioCodec	read-only	The negotiated coder rate. It specifies the transmit rate of audio compression to its associated call leg for the call.
INT cProxyCallActiveAudioUDPPort	1.3.6.1.4.1.9.10.57.1.1.1.1.3	INTEGER	read-only	Remote system UDP listener port to which to transmit voice packets for the call. A value of zero indicates that no port was used.
CVC cProxyCallActiveConnectionId	1.3.6.1.4.1.9.10.57.1.1.1.1.1	CvcGUid	read-only	The global call identifier for the Proxy call.
CPR cProxyCallActiveEndpointType	1.3.6.1.4.1.9.10.57.1.1.1.1.9	CProxyEndptType	read-only	The type of end point this proxy call leg is connected to.
INT cProxyCallActiveEndpointVendor	1.3.6.1.4.1.9.10.57.1.1.1.1.10	INTEGER	read-only	The H225 Manufacturers code for this endpoint. Zero indicates unknown vendor.
cProxyCallActiveEntry	1.3.6.1.4.1.9.10.57.1.1.1.1		not-accessible	The information regarding a single proxied call leg. An entry of this table is created when its associated call Active entry in the IETF Dial Control MIB is created and the call Active entry contains information for the call establishment to the peer on the data network. This entry is deleted when its associated Call Active entry in the IETF Dial Control MIB is deleted.
cProxyCallActiveGroup	1.3.6.1.4.1.9.10.57.3.2.1			A collection of objects providing the PROXY Call Active entry capability.
IP cProxyCallActiveRemoteIPAddress	1.3.6.1.4.1.9.10.57.1.1.1.1.2	IpAddress	read-only	Remote system IP address for the call.
I32 cProxyCallActiveRequestBandwidth	1.3.6.1.4.1.9.10.57.1.1.1.1.11	Integer32	read-only	The requested bandwidth for this proxied call leg.
NUM cProxyCallActiveRxAudioBytes	1.3.6.1.4.1.9.10.57.1.1.1.1.16	AbsoluteCounter32	read-only	The number of audio bytes received from the remote end for this call.
NUM cProxyCallActiveRxAudioPackets	1.3.6.1.4.1.9.10.57.1.1.1.1.15	AbsoluteCounter32	read-only	The number of audio packets received from the remote end for this call.
NUM cProxyCallActiveRxT120Bytes	1.3.6.1.4.1.9.10.57.1.1.1.1.24	AbsoluteCounter32	read-only	The number of T120 data bytes received from the remote end of this call.
NUM cProxyCallActiveRxT120Packets	1.3.6.1.4.1.9.10.57.1.1.1.1.23	AbsoluteCounter32	read-only	The number of T120 data packets received from the remote end for this call.
NUM cProxyCallActiveRxVideoBytes	1.3.6.1.4.1.9.10.57.1.1.1.1.20	AbsoluteCounter32	read-only	The number of video bytes received from the remote end for this call.
NUM cProxyCallActiveRxVideoPackets	1.3.6.1.4.1.9.10.57.1.1.1.1.19	AbsoluteCounter32	read-only	The number of video packets received from the remote end for this call.
INT cProxyCallActiveT120TCPPort1	1.3.6.1.4.1.9.10.57.1.1.1.1.5	INTEGER	read-only	First remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used.
INT cProxyCallActiveT120TCPPort2	1.3.6.1.4.1.9.10.57.1.1.1.1.6	INTEGER	read-only	Second remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used.
INT cProxyCallActiveT120TCPPort3	1.3.6.1.4.1.9.10.57.1.1.1.1.7	INTEGER	read-only	Third remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used.
INT cProxyCallActiveT120TCPPort4	1.3.6.1.4.1.9.10.57.1.1.1.1.8	INTEGER	read-only	Fourth remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used.
cProxyCallActiveTable	1.3.6.1.4.1.9.10.57.1.1.1		not-accessible	This table is the Proxy extension to the call Active table of IETF Dial Control MIB. It contains Proxy call leg information about specific proxied calls.
NUM cProxyCallActiveTxAudioBytes	1.3.6.1.4.1.9.10.57.1.1.1.1.18	AbsoluteCounter32	read-only	The number of audio bytes transmitted to the remote end for this call.
NUM cProxyCallActiveTxAudioPackets	1.3.6.1.4.1.9.10.57.1.1.1.1.17	AbsoluteCounter32	read-only	The number of audio packets transmitted to the remote end for this call.
NUM cProxyCallActiveTxT120Bytes	1.3.6.1.4.1.9.10.57.1.1.1.1.26	AbsoluteCounter32	read-only	The number of T120 data bytes transmitted to the remote end of this call.
NUM cProxyCallActiveTxT120Packets	1.3.6.1.4.1.9.10.57.1.1.1.1.25	AbsoluteCounter32	read-only	The number of T120 data packets transmitted to the remote end for this call.
NUM cProxyCallActiveTxVideoBytes	1.3.6.1.4.1.9.10.57.1.1.1.1.22	AbsoluteCounter32	read-only	The number of video bytes transmitted to the remote end for this call.
NUM cProxyCallActiveTxVideoPackets	1.3.6.1.4.1.9.10.57.1.1.1.1.21	AbsoluteCounter32	read-only	The number of video packets transmitted to the remote end for this call.
CPR cProxyCallActiveVideoCoderRate	1.3.6.1.4.1.9.10.57.1.1.1.1.14	CProxyVideoCodec	read-only	The negotiated coder rate. It specifies the transmit rate of video compression to its associated call leg for the call.
INT cProxyCallActiveVideoUDPPort	1.3.6.1.4.1.9.10.57.1.1.1.1.4	INTEGER	read-only	Remote system UDP listener port to which to transmit video packets for the call. A value of zero indicates that no port was used.
cProxyCallHistory	1.3.6.1.4.1.9.10.57.1.2
I32 cProxyCallHistoryActualBandwidth	1.3.6.1.4.1.9.10.57.1.2.1.1.12	Integer32	read-only	The actual bandwidth used by the proxied call.
CPR cProxyCallHistoryAudioCoderRate	1.3.6.1.4.1.9.10.57.1.2.1.1.13	CProxyAudioCodec	read-only	The negotiated coder rate. It specifies the transmit rate of audio compression to its associated call leg for the call.
INT cProxyCallHistoryAudioUDPPort	1.3.6.1.4.1.9.10.57.1.2.1.1.3	INTEGER	read-only	Remote system UDP listener port to which to transmit voice packets for the call. A value of zero indicates that no port was used.
CVC cProxyCallHistoryConnectionId	1.3.6.1.4.1.9.10.57.1.2.1.1.1	CvcGUid	read-only	The global call identifier for the Proxy call.
CPR cProxyCallHistoryEndpointType	1.3.6.1.4.1.9.10.57.1.2.1.1.9	CProxyEndptType	read-only	The type of end point this proxy call leg is connected to.
INT cProxyCallHistoryEndpointVendor	1.3.6.1.4.1.9.10.57.1.2.1.1.10	INTEGER	read-only	The H225 Manufacturers code for this endpoint. Zero indicates unknown vendor.
cProxyCallHistoryEntry	1.3.6.1.4.1.9.10.57.1.2.1.1		not-accessible	The information regarding a single proxied call leg. An entry of this table is created when its associated call History entry in the IETF Dial Control MIB is created. The call History entry contains information for the call establishment to the peer on the data network backbone via a voice over PROXY peer. The entry is deleted when its associated call History entry in the IETF Dial Control MIB is deleted.
cProxyCallHistoryGroup	1.3.6.1.4.1.9.10.57.3.2.2			A collection of objects providing the PROXY Call Active entry capability.
IP cProxyCallHistoryRemoteIPAddress	1.3.6.1.4.1.9.10.57.1.2.1.1.2	IpAddress	read-only	Remote system IP address for the call.
I32 cProxyCallHistoryRequestBandwidth	1.3.6.1.4.1.9.10.57.1.2.1.1.11	Integer32	read-only	The requested bandwidth for this proxied call leg.
NUM cProxyCallHistoryRxAudioBytes	1.3.6.1.4.1.9.10.57.1.2.1.1.16	AbsoluteCounter32	read-only	The number of audio bytes received from the remote end for this call.
NUM cProxyCallHistoryRxAudioPackets	1.3.6.1.4.1.9.10.57.1.2.1.1.15	AbsoluteCounter32	read-only	The number of audio packets received from the remote end for this call.
NUM cProxyCallHistoryRxT120Bytes	1.3.6.1.4.1.9.10.57.1.2.1.1.24	AbsoluteCounter32	read-only	The number of T120 data bytes received from the remote end for this call.
NUM cProxyCallHistoryRxT120Packets	1.3.6.1.4.1.9.10.57.1.2.1.1.23	AbsoluteCounter32	read-only	The number of T120 data packets received from the remote end for this call.
NUM cProxyCallHistoryRxVideoBytes	1.3.6.1.4.1.9.10.57.1.2.1.1.20	AbsoluteCounter32	read-only	The number of video bytes received from the remote end for this call.
NUM cProxyCallHistoryRxVideoPackets	1.3.6.1.4.1.9.10.57.1.2.1.1.19	AbsoluteCounter32	read-only	The number of video packets received from the remote end for this call.
INT cProxyCallHistoryT120TCPPort1	1.3.6.1.4.1.9.10.57.1.2.1.1.5	INTEGER	read-only	First remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used.
INT cProxyCallHistoryT120TCPPort2	1.3.6.1.4.1.9.10.57.1.2.1.1.6	INTEGER	read-only	Second remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used.
INT cProxyCallHistoryT120TCPPort3	1.3.6.1.4.1.9.10.57.1.2.1.1.7	INTEGER	read-only	Third remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used.
INT cProxyCallHistoryT120TCPPort4	1.3.6.1.4.1.9.10.57.1.2.1.1.8	INTEGER	read-only	Fourth remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used.
cProxyCallHistoryTable	1.3.6.1.4.1.9.10.57.1.2.1		not-accessible	This table is the Proxy extension to the History call table of IETF Dial Control MIB. It contains PROXY call leg information about proxied call.
NUM cProxyCallHistoryTxAudioBytes	1.3.6.1.4.1.9.10.57.1.2.1.1.18	AbsoluteCounter32	read-only	The number of audio bytes transmitted to the remote end for this call.
NUM cProxyCallHistoryTxAudioPackets	1.3.6.1.4.1.9.10.57.1.2.1.1.17	AbsoluteCounter32	read-only	The number of audio packets transmitted to the remote end for this call.
NUM cProxyCallHistoryTxT120Bytes	1.3.6.1.4.1.9.10.57.1.2.1.1.26	AbsoluteCounter32	read-only	The number of T120 data bytes transmitted to the remote end for this call.
NUM cProxyCallHistoryTxT120Packets	1.3.6.1.4.1.9.10.57.1.2.1.1.25	AbsoluteCounter32	read-only	The number of T120 data packets transmitted to the remote end for this call.
NUM cProxyCallHistoryTxVideoBytes	1.3.6.1.4.1.9.10.57.1.2.1.1.22	AbsoluteCounter32	read-only	The number of video bytes transmitted to the remote end for this call.
NUM cProxyCallHistoryTxVideoPackets	1.3.6.1.4.1.9.10.57.1.2.1.1.21	AbsoluteCounter32	read-only	The number of video packets transmitted to the remote end for this call.
CPR cProxyCallHistoryVideoCoderRate	1.3.6.1.4.1.9.10.57.1.2.1.1.14	CProxyVideoCodec	read-only	The negotiated coder rate. It specifies the transmit rate of video compression to its associated call leg for the call.
INT cProxyCallHistoryVideoUDPPort	1.3.6.1.4.1.9.10.57.1.2.1.1.4	INTEGER	read-only	Remote system UDP listener port to which to transmit video packets for the call. A value of zero indicates that no port was used.

RFC description

Enhances IETF Dial Control MIB with proxy management information for voice communications and call control.

Start monitoring Cisco voice/video proxy and media-relay gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-PROXY-CONTROL-MIB

What Is CISCO-PROXY-CONTROL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description