CISCO-PACKET-CAPTURE-MIB

All MIBs › CISCO-PACKET-CAPTURE-MIB

Organization: Cisco System, Inc.

Last Updated: 2008-07-07

Category: Cisco Devices, Network Monitoring (RMON)

Description: Manages packet capture sessions including filters, buffer size, and captured frame retrieval on Cisco devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-PACKET-CAPTURE-MIB?

CISCO-PACKET-CAPTURE-MIB is a Cisco vendor-specific MIB for managing the on-box packet capture feature available on Cisco IOS/IOS-XE and related platforms, letting administrators start, stop, and configure traffic captures directly through SNMP without a separate sniffer. It exposes session-oriented configuration and status data: how many capture sessions are allowed, per-session configuration such as packet length/rate limits and destination capture file name, control actions, and the operational status of each session. It is used to monitor the software-feature status of the device's diagnostic subsystem: the session operational status reveals whether a capture is actively running, stopped, or failed, and the maximum-sessions and configuration-status objects help detect resource limits or misconfiguration preventing a capture from starting. This is a self-contained Cisco feature MIB, though it fits within the broader Cisco embedded packet capture (EPC) diagnostic feature set on the platform. It is typically used by network engineers doing remote, non-intrusive traffic troubleshooting on Cisco routers and switches without needing local CLI or physical access. Engineers can download the CISCO-PACKET-CAPTURE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-PACKET-CAPTURE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IOS/IOS-XE router or switch

Monitoring Examples

An admin configures a capture via cpcSessionConfigTable, setting cpcSessionPacketLength, cpcSessionPacketLimits, and cpcSessionPacketRateLimit to bound the capture size, then triggers it with cpcSessionAction and polls cpcSessionOperStatus to confirm the session transitioned to a running state. If cpcSessionOperStatus instead shows a failed or inactive state, checking cpcSessionConfigStatus and cpcMaxSessionAllowed reveals whether the session hit a resource limit. cpcSessionDestFileName identifies which capture file, typically on flash or bootflash, holds the captured packets for later retrieval.

What Can Be Monitored

packet capture session operational status
active/allowed capture session count
capture packet length and rate limits
capture destination filename
session configuration status

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From CISCO-VTP-MIB

VlanIndex

From IF-MIB

ifIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoPacketCaptureMIB	1.3.6.1.4.1.9.9.602			The MIB module for the management of packet capture feature.
cpcMIBNotification	1.3.6.1.4.1.9.9.602.0
cpcMIBObjects	1.3.6.1.4.1.9.9.602.1
cpcGenericConfig	1.3.6.1.4.1.9.9.602.1.1
U32 cpcMaxSessionAllowed	1.3.6.1.4.1.9.9.602.1.1.1	Unsigned32	read-only	The maximum number of packet capture sessions allowed in cpcSessionConfigTable. A value of zero indicates no limitation on the number of configurable sessions.
cpcSessionConfigTable	1.3.6.1.4.1.9.9.602.1.1.2		not-accessible	A table of configuration to be used in the packet capture sessions. This entry may be modified if value of corresponding instance of cpcSessionConfigStatus is 'active'.
cpcSessionConfigEntry	1.3.6.1.4.1.9.9.602.1.1.2.1		not-accessible	An entry containing management information of a packet capture session.
U32 cpcSessionId	1.3.6.1.4.1.9.9.602.1.1.2.1.1	Unsigned32	not-accessible	An unique number which represents a session.
INT cpcSessionOperStatus	1.3.6.1.4.1.9.9.602.1.1.2.1.2	INTEGER	read-only	Operational status of a packet capture session. other : none of the following. inProgress : packet capture session is in progress. completed : number of captured frames has reached the value of corresponding instance of cpcSessionPacketLimits. stopped : packet capture session was administratively stopped. storageFull: storage device is full. bufferFull : storage buffer is full.
STR cpcSessionDestFileName	1.3.6.1.4.1.9.9.602.1.1.2.1.3	SnmpAdminString	read-create	The destination file name used to store the captured frames. Value of this object must be specified in the format of : for local location, or :/// for network location. This object may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress' or the value of cpcBufferOperStatus of an instance entry with same cpcSessionId in cpcBufferConfigEntry is 'exporting'.
U32 cpcSessionPacketLength	1.3.6.1.4.1.9.9.602.1.1.2.1.4	Unsigned32	read-create	The length of packet to be captured by this session. If the length of an actual packet is greater than the value of this object, the session will only capture the first number of bytes specified by this object. A value zero for this object indicates that the entire packet will be captured. This object may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
U32 cpcSessionPacketLimits	1.3.6.1.4.1.9.9.602.1.1.2.1.5	Unsigned32	read-create	The number of packets to be captured by this session. A value of zero for this object indicates that there is no limitation. When the value of this object is zero, the session remains 'inProgress' until it is administratively stopped or the storage is full. This object may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
INT cpcSessionAction	1.3.6.1.4.1.9.9.602.1.1.2.1.6	INTEGER	read-create	The action control for this capture session. Setting this object to 'start' causes the capture session to be started if it is not running. Setting this object to 'stop' terminates the capturing session if it is running. The value of this object will be changed to 'stop' when value of the corresponding instance of cpcSessionOperStatus leaves from 'inProgress' to other status. This object may only be set when the corresponding instance value of cpcSessionConfigStatus is 'active'.
ROW cpcSessionConfigStatus	1.3.6.1.4.1.9.9.602.1.1.2.1.7	RowStatus	read-create	The status of this conceptual row.
U32 cpcSessionPacketRateLimit	1.3.6.1.4.1.9.9.602.1.1.2.1.8	Unsigned32	read-create	Rate limit for this session. Only packets within the rate may be captured. A value of zero for this object indicates that there is no rate limitation. This object may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
STR cpcSessionDescr	1.3.6.1.4.1.9.9.602.1.1.2.1.9	SnmpAdminString	read-create	Provides description of this session.
U32 cpcSessionMaxSources	1.3.6.1.4.1.9.9.602.1.1.3	Unsigned32	read-only	The maximum number of entries allowed in cpcCaptureSourceIfTable for a packet capture session. A value of zero indicates no limitation on the number of configurable sources.
cpcCaptureSourceIfTable	1.3.6.1.4.1.9.9.602.1.1.4		not-accessible	A table of interface information to be used in the packet capture session.
cpcCaptureSourceIfEntry	1.3.6.1.4.1.9.9.602.1.1.4.1		not-accessible	An entry containing interface related management information for a packet capture session. The entry is created and deleted by using cpcCaptureSourceIfStatus object. The entry may not be modified, added or deleted when the corresponding value of cpcSessionOperStatus is 'inProgress'.
INT cpcCaptureSourceIfDirection	1.3.6.1.4.1.9.9.602.1.1.4.1.1	INTEGER	read-create	The direction of traffic to be captured. rx : Only ingress traffic will be captured. tx : Only egress traffic will be captured. both: Traffic from both directions will be captured. This object may be modified if value of the corresponding instance of cpcCaptureSourceIfStatus is 'active'.
ROW cpcCaptureSourceIfStatus	1.3.6.1.4.1.9.9.602.1.1.4.1.2	RowStatus	read-create	The status of this conceptual row.
cpcFilterConfig	1.3.6.1.4.1.9.9.602.1.2
U32 cpcMaxFilterAllowed	1.3.6.1.4.1.9.9.602.1.2.1	Unsigned32	read-only	The maximum number of filters allowed in a packet capture session. Value of zero indicates that there is no limitation.
cpcMacFilterTable	1.3.6.1.4.1.9.9.602.1.2.2		not-accessible	A table of MAC filter information to be used in the packet capture session.
cpcMacFilterEntry	1.3.6.1.4.1.9.9.602.1.2.2.1		not-accessible	An entry containing management information about a packet capture filter based on MAC address. The entry is created or deleted by using cpcMacFilterRowStatus object. The entry may not be modified, created or deleted when the corresponding value of cpcSessionOperStatus is 'inProgress'.
MAC cpcMacFilterMacAddress	1.3.6.1.4.1.9.9.602.1.2.2.1.1	MacAddress	not-accessible	The filtered MAC address. Incorporated with the corresponding instance value of crcMacFilterCriteria, packet capture will capture packets sending from or to the address specified by this object.
CIS cpcMacFilterCriteria	1.3.6.1.4.1.9.9.602.1.2.2.1.2	CiscoPacketCaptureFilterCriteria	not-accessible	The filter criteria of the entry.
ROW cpcMacFilterRowStatus	1.3.6.1.4.1.9.9.602.1.2.2.1.3	RowStatus	read-create	The status of this conceptual row.
cpcIpFilterTable	1.3.6.1.4.1.9.9.602.1.2.3		not-accessible	A table of IP filter information to be used in the packet capture session.
cpcIpFilterEntry	1.3.6.1.4.1.9.9.602.1.2.3.1		not-accessible	An entry containing management information if IP based packet capture filter for the packet capture session. The entry can be created or deleted by using cpcIpFilterRowStatus object. The entry may not be modified, created or deleted when value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
IPt cpcIpFilterAddressType	1.3.6.1.4.1.9.9.602.1.2.3.1.1	InetAddressType	not-accessible	The type of Internet address is configured in this packet capture filter.
IP cpcIpFilterAddress	1.3.6.1.4.1.9.9.602.1.2.3.1.2	InetAddress	not-accessible	The Internet address for the filter. The type of this address is determined by the value of the cpcIpFilterAddressType object. The cpcIpFilterAddress may not be empty due to the SIZE restriction. Incorporated with the corresponding instance value of cpcIpFilterCriteria, packet capture will capture packets sending to or from the address specified by this object.
CIS cpcIpFilterCriteria	1.3.6.1.4.1.9.9.602.1.2.3.1.3	CiscoPacketCaptureFilterCriteria	not-accessible	The filter criteria of the entry.
ADR cpcIpFilterMask	1.3.6.1.4.1.9.9.602.1.2.3.1.4	InetAddressPrefixLength	read-create	The prefix length value associated with the corresponding cpcIpFilterAddress. The value of zero indicates that no IP mask is associated with the corresponding cpcIpFilterAddress. This object may be modified while value of the corresponding instance of cpcIpFilterRowStatus is 'active'.
ROW cpcIpFilterRowStatus	1.3.6.1.4.1.9.9.602.1.2.3.1.5	RowStatus	read-create	The status of this conceptual row.
U32 cpcMaxMacFilterAllowed	1.3.6.1.4.1.9.9.602.1.2.4	Unsigned32	read-only	The maximum number of filters allowed in cpcMacFilterTable for each packet capture session. Once the number of entries in cpcMacFilterTable reaches the value of this object, if users need to create a new entry in cpcMacFilteTable, an existing entry must be removed first. Value of zero indicates that there is no limitation.
U32 cpcMaxIpFilterAllowed	1.3.6.1.4.1.9.9.602.1.2.5	Unsigned32	read-only	The maximum number of IP filter allowed in cpcIpFilterTable for each packet capture session. Once the number of entries in cpcIpFilterTable reaches the value of this object, if users need to create a new entry in cpcIpFilterTable, an existing entry must be removed first. Value of zero indicates that there is no limitation.
cpcPacketLengthFilterTable	1.3.6.1.4.1.9.9.602.1.2.6		not-accessible	A table of packet length filter configuration to be used in the packet capture sessions.
cpcPacketLengthFilterEntry	1.3.6.1.4.1.9.9.602.1.2.6.1		not-accessible	An entry contains management information about a packet capture filter based on packet length. A row is created for each entry in cpcSessionConfigTable. This entry may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
U32 cpcPacketLengthFilterMin	1.3.6.1.4.1.9.9.602.1.2.6.1.1	Unsigned32	read-write	This object specifies the minimum length of the packet to be captured. Packets having length smaller than this value will not be captured. A zero value means there is no minimum length limit. The value of cpcPacketLengthFilterMax object should not be less than that of cpcPacketLengthFilterMin object in the same row when both values are non zero.
U32 cpcPacketLengthFilterMax	1.3.6.1.4.1.9.9.602.1.2.6.1.2	Unsigned32	read-write	This object specifies the maximum length of the packet to be captured. Packets having length bigger than this value will not be captured. A zero value means there is no maximum length limit. The value of cpcPacketLengthFilterMax object should not be less than that of cpcPacketLengthFilterMin object in the same row when both values are non zero.
U32 cpcMaxEthertypeFilterAllowed	1.3.6.1.4.1.9.9.602.1.2.7	Unsigned32	read-only	The maximum number of filters allowed in cpcEthertypeFilterTable for each packet capture session. Value of zero indicates that there is no limitation.
cpcEthertypeFilterTable	1.3.6.1.4.1.9.9.602.1.2.8		not-accessible	This table lists Ethertype filter configuration to be used in the packet capture sessions.
cpcEthertypeFilterEntry	1.3.6.1.4.1.9.9.602.1.2.8.1		not-accessible	An entry contains management information about a packet capture filter based on Ethertype. This entry may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
I32 cpcEthertypeFilterValue	1.3.6.1.4.1.9.9.602.1.2.8.1.1	Integer32	not-accessible	The ethertype value to indicate which packet to be captured.
ROW cpcEthertypeFilterStatus	1.3.6.1.4.1.9.9.602.1.2.8.1.2	RowStatus	read-create	This object specifies the status of this conceptual row and is used to manage creation, and deletion of entries in this table. Whenever the current number of rows is equal to the value of cpcMaxEthertypeFilterAllowed, setting RowStatus of a new row to 'createAndGo' or 'createAndWait' should fail with an 'inconsistentValue' error. That is, to create another row, an existing row must be deleted via either setting its RowStatus object to 'destroy' or alternatively via the CLI.
U32 cpcMaxVlanFilterAllowed	1.3.6.1.4.1.9.9.602.1.2.9	Unsigned32	read-only	The maximum number of filters allowed in cpcVlanFilterTable for each packet capture session. Value of zero indicates that there is no limitation.
cpcVlanFilterTable	1.3.6.1.4.1.9.9.602.1.2.10		not-accessible	A table of VLAN filter information to be used in packet capture sessions.
cpcVlanFilterEntry	1.3.6.1.4.1.9.9.602.1.2.10.1		not-accessible	An entry contains management information about a packet capture filter based on VLAN. The entry is created or deleted using cpcVlanFilterRowStatus object. This entry may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
VLA cpcVlanFilterVlanIndex	1.3.6.1.4.1.9.9.602.1.2.10.1.1	VlanIndex	not-accessible	The VLAN index value of this filter.
ROW cpcVlanFilterRowStatus	1.3.6.1.4.1.9.9.602.1.2.10.1.2	RowStatus	read-create	This object specifies the status of this conceptual row and is used to manage creation, and deletion of entries in this table. Whenever the current number of rows is equal to the value of cpcMaxVlanFilterAllowed, setting RowStatus of a new row to 'createAndGo' or 'createAndWait' should fail with an 'inconsistentValue' error. That is, to create another row, an existing row must be deleted via either setting its RowStatus object to 'destroy' or alternatively via the CLI.
U32 cpcMaxAccessGroupFilterAllowed	1.3.6.1.4.1.9.9.602.1.2.11	Unsigned32	read-only	The maximum number of filters allowed in cpcAccessGroupFilterTable for each packet capture session. Value of zero indicates that there is no limitation.
cpcAccessGroupFilterTable	1.3.6.1.4.1.9.9.602.1.2.12		not-accessible	A table of Access-Group filter information to be used in packet capture sessions.
cpcAccessGroupFilterEntry	1.3.6.1.4.1.9.9.602.1.2.12.1		not-accessible	An entry contains management information about a packet capture filter based on Access-Group number or name. The entry is created or deleted using cpcAccessGroupFilterStatus object. This entry may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
INT cpcAccessGroupFilterType	1.3.6.1.4.1.9.9.602.1.2.12.1.1	INTEGER	not-accessible	The way the ACL denoted by cpcAccessGroupFilterName is applied to the packets. hardware: hardware based software: software based.
STR cpcAccessGroupFilterName	1.3.6.1.4.1.9.9.602.1.2.12.1.2	SnmpAdminString	not-accessible	The ACL name or ACL number used in this package capture filter.
ROW cpcAccessGroupFilterStatus	1.3.6.1.4.1.9.9.602.1.2.12.1.3	RowStatus	read-create	This object specifies the status of this conceptual row and is used to manage creation, and deletion of entries in this table. Whenever the current number of rows is equal to the value of cpcMaxAccessGroupFilterAllowed, setting RowStatus of a new row to 'createAndGo' or 'createAndWait' should fail with an 'inconsistentValue' error. That is, to create another row, an existing row must be deleted via either setting its RowStatus object to 'destroy' or alternatively via the CLI.
cpcBufferConfig	1.3.6.1.4.1.9.9.602.1.3
cpcBufferConfigTable	1.3.6.1.4.1.9.9.602.1.3.1		not-accessible	A table of buffer configuration and controls for packet capture sessions.
cpcBufferConfigEntry	1.3.6.1.4.1.9.9.602.1.3.1.1		not-accessible	An entry contains management information for a packet capture session's buffer. An entry is created corresponding to each entry in cpcSessionConfigTable. This entry may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
INT cpcBufferType	1.3.6.1.4.1.9.9.602.1.3.1.1.1	INTEGER	read-write	Type of the buffer for a packet capture session. linear : captured packets will be kept in the buffer one after the other. If there is no available space in the buffer, packet capture session will stop and value of the corresponding instance of cpcSessionOperStatus is set to 'bufferFull'. circular: If there is no space to store a captured packet completely, the oldest packet in the buffer will be overwritten.
U32 cpcBufferSize	1.3.6.1.4.1.9.9.602.1.3.1.1.2	Unsigned32	read-write	Size of the buffer for a packet capture session. A value zero for this object indicates that there is no limitation.
INT cpcBufferAction	1.3.6.1.4.1.9.9.602.1.3.1.1.3	INTEGER	read-write	The action control for this packet capture session buffer. noAction: no action (do nothing). clear: clear this capture buffer. export: exporting the buffer contents to the storage specified by cpcSessionDestFileName of cpcSessionConfigEntry with the same cpcSessionId value. When the value is set to 'noAction', no operation is performed. When read, the value 'noAction' is always returned.
INT cpcBufferOperStatus	1.3.6.1.4.1.9.9.602.1.3.1.1.4	INTEGER	read-only	Operational status of a packet capture buffer. other : none of the following. exporting : buffer is being exported to the storage denoted by cpcSessionDestFileName from cpcSessionConfigEntry indexed by the same cpcSessionId.
cpcScheduleConfig	1.3.6.1.4.1.9.9.602.1.4
cpcScheduleConfigTable	1.3.6.1.4.1.9.9.602.1.4.1		not-accessible	A table of schedule configuration and information for packet capture sessions.
cpcScheduleConfigEntry	1.3.6.1.4.1.9.9.602.1.4.1.1		not-accessible	An entry containing schedule configuration and information for a packet capture session. An entry is created corresponding to each entry in cpcSessionConfigTable if scheduled operation is required for a packet capture session. This entry may not be modified if value of the corresponding instance of cpcSessionOperStatus is 'inProgress'.
DAT cpcScheduleStartTime	1.3.6.1.4.1.9.9.602.1.4.1.1.1	DateAndTime	read-write	The date and time this packet capture session will be started. A value of all zero with length of eight indicates either the scheduled time has expired or none is scheduled.
U32 cpcScheduleCapturePeriod	1.3.6.1.4.1.9.9.602.1.4.1.1.2	Unsigned32	read-write	The length of time, in seconds, that this packet capture session will be running. Value of zero indicates that there is no restriction on the capture period.
cpcSessionStats	1.3.6.1.4.1.9.9.602.1.5
cpcSessionStatsTable	1.3.6.1.4.1.9.9.602.1.5.1		not-accessible	A table of statistic information for packet capture sessions.
cpcSessionStatsEntry	1.3.6.1.4.1.9.9.602.1.5.1.1		not-accessible	An entry contains statistic information of a packet capture session.
U32 cpcSessionPacketsReceived	1.3.6.1.4.1.9.9.602.1.5.1.1.1	Unsigned32	read-only	Indicates the number of packets received in this sessions.
U32 cpcSessionPacketsCaptured	1.3.6.1.4.1.9.9.602.1.5.1.1.2	Unsigned32	read-only	Indicates the number of packets captured in this session.
U32 cpcSessionPacketsDropped	1.3.6.1.4.1.9.9.602.1.5.1.1.3	Unsigned32	read-only	Indicates the number of packets dropped in this session.
cpcMIBConformance	1.3.6.1.4.1.9.9.602.2
cpcMIBCompliances	1.3.6.1.4.1.9.9.602.2.1
cpcCompliance	1.3.6.1.4.1.9.9.602.2.1.1			The compliance statement for devices that implement CISCO-PACKET-CAPTURE-MIB.
cpcComplianceRev1	1.3.6.1.4.1.9.9.602.2.1.2			The compliance statement for devices that implement CISCO-PACKET-CAPTURE-MIB.
cpcMIBGroups	1.3.6.1.4.1.9.9.602.2.2
cpcGenericConfigGroup	1.3.6.1.4.1.9.9.602.2.2.1			A collection of object(s) that provides the generic configuration for packet capture feature.
cpcFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.2			A collection of object(s) that provides general filter configuration for packet capture feature.
cpcMacFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.3			A collection of object(s) that provides the MAC address filter configuration for packet capture feature.
cpcIpFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.4			A collection of object(s) that provides the IP address filter configuration for packet capture feature.
cpcDestFileNameConfigGroup	1.3.6.1.4.1.9.9.602.2.2.5			A collection of object(s) that provides configuration for destination file for packet capture feature.
cpcPacketLengthFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.6			A collection of object(s) that provides packet length filter configuration for packet capture feature.
cpcEthertypeFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.7			A collection of object(s) that provides Ethertype filter configuration for packet capture feature.
cpcVlanFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.8			A collection of object(s) that provides VLAN filter configuration for packet capture feature.
cpcAccessGroupFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.9			A collection of object(s) that provides Access Group filter configuration for packet capture feature.
cpcBufferConfigGroup	1.3.6.1.4.1.9.9.602.2.2.10			A collection of object(s) that provides buffer configuration for packet capture feature.
cpcScheduleConfigGroup	1.3.6.1.4.1.9.9.602.2.2.11			A collection of object(s) that provides schedule configuration for packet capture feature.
cpcSessionStatsGroup	1.3.6.1.4.1.9.9.602.2.2.12			A collection of object(s) that provides statistic information for packet capture feature.
cpcMaxMacFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.13			A collection of object(s) that provides information on the maximum MAC address filter allowed for each packet capture session.
cpcMaxIpFilterConfigGroup	1.3.6.1.4.1.9.9.602.2.2.14			A collection of object(s) that provides information on the maximum IP address filter allowed for each packet capture session.
cpcSessionPacketRateLimitGroup	1.3.6.1.4.1.9.9.602.2.2.15			A collection of object(s) that provides rate limit configuration for packet capture feature.
cpcSessionDescrGroup	1.3.6.1.4.1.9.9.602.2.2.16			A collection of object(s) that provides session description configuration for packet capture feature.

RFC description

Manages packet capture sessions with filtering, buffering, and scheduling capabilities on Cisco devices.

Start monitoring Cisco IOS/IOS-XE router or switch (packet capture) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-PACKET-CAPTURE-MIB

What Is CISCO-PACKET-CAPTURE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description