| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoSnapshotMIB | 1.3.6.1.4.1.9.9.19 | | | Snapshot routing MIB |
| ciscoSnapshotMIBObjects | 1.3.6.1.4.1.9.9.19.1 | | | |
| I32 ciscoSnapshotForceActive | 1.3.6.1.4.1.9.9.19.1.1 | Integer32 | read-write | Forces the snapshot state to active for all entries
of the ciscoSnapshotActivityTable whose
ciscoSnapshotIfIndex value is specified as parameter.
The interface associated with ciscoSnapshotIfIndex
must be a client interface.
Retrieval of this object will return the value of the
ciscoSnapshotIfIndex that was last forced into the
active state, or 0 if no interfaces have been forced into
the active state since the router was reset |
| ciscoSnapshotInterfaceTable | 1.3.6.1.4.1.9.9.19.1.2 | | not-accessible | A list of Snapshot Routing configuration entries. |
| ciscoSnapshotInterfaceEntry | 1.3.6.1.4.1.9.9.19.1.2.1 | | not-accessible | A Snapshot Routing configuration entry.
A management station wishing to create an entry should
create the associated instance of the row status object.
It should also modify, either in the same or in successive
PDUs, the values for the other objects if the defaults are
not appropriate.
Once the appropriate instance of all the configuration
objects have been created, either by an explicit SNMP
set request or by default, the row status should be set
to active to initiate the request. Note that this entire
procedure may be initiated via a single set request which
specifies a row status of createAndGo.
In order to prevent inactive (notReady, or notInService)
entries from clogging the table, entries will be aged out,
but an entry will never be deleted within 5 minutes of
creation. |
| NUM ciscoSnapshotIfIndex | 1.3.6.1.4.1.9.9.19.1.2.1.1 | InterfaceIndex | not-accessible | The interface to which this entry pertains. |
| T/F ciscoSnapshotClient | 1.3.6.1.4.1.9.9.19.1.2.1.2 | TruthValue | read-create | When true, this router is the client snapshot router on
the interface. When false, this router is the server
snapshot router on the interface. |
| T/F ciscoSnapshotDialer | 1.3.6.1.4.1.9.9.19.1.2.1.3 | TruthValue | read-create | Indicates whether or not snapshot routing on this
interface uses Dial-on-Demand routing. |
| I32 ciscoSnapshotActiveInterval | 1.3.6.1.4.1.9.9.19.1.2.1.4 | Integer32 | read-create | The amount of time during which routes may be exchanged
between the client and server routers. |
| I32 ciscoSnapshotQuietInterval | 1.3.6.1.4.1.9.9.19.1.2.1.5 | Integer32 | read-create | The amount of time during which routes are retained and
frozen between active periods.
An instance of this object may only be present if the value
of the associated ciscoSnapshotClient object is true. |
| I32 ciscoSnapshotRetryInterval | 1.3.6.1.4.1.9.9.19.1.2.1.6 | Integer32 | read-only | The amount of time to wait and retry a route exchange if an
active period elapses with no routes being exchanged. For
example, if an interface is down (or a DDR phone number is
busy, or a DDR interface is unavailable) during the active
interval, instead of waiting for the amount of time specified
by ciscoSnapshotQuietTime to elapse before an attempt is made
to exchange routing updates again, the attempt is made after
the amount of time specified by this object has elapsed.
This value is calculated automatically based on the
ciscoSnapshotActiveInterval.
An instance of this object may only be present if the value
of the associated ciscoSnapshotClient object is true. |
| INT ciscoSnapshotIfUpAction | 1.3.6.1.4.1.9.9.19.1.2.1.7 | INTEGER | read-create | This object controls the action that takes place when the
interface associated with this entry transitions to the `up'
state while snapshot routing on the interface is in quiet
mode.
A value of goActive will cause the immediate transition to
the active state.
A value of noAction will cause no such transition. Instead,
the transition to the active state will occur normally when
the current quiet period has expired.
Going active immediately incurs extra routing protocol
overhead, but allows a fresh set of routing updates be
exchanged each time the line is brought up. This is useful
in a Dial-on-Demand routing environment.
An instance of this object may only be present if the value
of the associated ciscoSnapshotClient object is true. |
| ROW ciscoSnapshotRowStatus | 1.3.6.1.4.1.9.9.19.1.2.1.8 | RowStatus | read-create | The status of this table entry. Once the entry status is
set to active, the snapshot routing process will be
enabled for this interface. |
| ciscoSnapshotActivityTable | 1.3.6.1.4.1.9.9.19.1.3 | | not-accessible | A list of snapshot routing activity entries. |
| ciscoSnapshotActivityEntry | 1.3.6.1.4.1.9.9.19.1.3.1 | | not-accessible | A snapshot routing activity entry.
Entries in this table are added for active row entries
in the ciscoSnapshotInterfaceTable. If a row entry in
the ciscoSnapshotInterfaceTable is set to notInService,
or deleted, associated entries in this table will be
deleted.
Note that if the associated row in the
ciscoSnapshotInterfaceTable is for a server router, entries
in this table will only be present when the server is
actively involved in snapshot routing updates. |
| I32 ciscoSnapshotActivityIndex | 1.3.6.1.4.1.9.9.19.1.3.1.1 | Integer32 | not-accessible | An index value that uniquely identifies a Snapshot
Activity Entry on a given interface. |
| INT ciscoSnapshotActivityState | 1.3.6.1.4.1.9.9.19.1.3.1.2 | INTEGER | read-only | The current state of snapshot routing for this entry.
active means that routing information may be exchanged.
quiet, only present on a client snapshot interface,
means that routes are frozen, and that no routing
information may be exchanged until the active state is
reentered. serverPostActive, only present on a server
snapshot interface, means that the active period has
expired, but routing information will still be accepted
from (but not sent to) the associated client router.
transitionToQuiet, and transitionToActive, only present
on a client, are temporary states entered after the active
state, wherein any down to up transition of the interface
will cause a move to the quiet or active state, respectively.
limbo is a temporary state for activity blocks that
are in the process of being created or destroyed. |
| I32 ciscoSnapshotActivityTimer | 1.3.6.1.4.1.9.9.19.1.3.1.3 | Integer32 | read-only | The amount of time remaining in the current state. |
| I32 ciscoSnapshotExchangeTimer | 1.3.6.1.4.1.9.9.19.1.3.1.4 | Integer32 | read-only | The amount of time during the last active state, in
which protocol exchanges occurred. The minimum time required
to allow updates to be exchanged for a 'successfull update
cycle' is the greater of 3 minutes, or 1/2 the active time.
If the ciscoSnapshotExchangeTimer is less than this, the
quiet state will use the retry interval to determine when next
to go active.
An instance of this object will only be present when
the associated value of ciscoSnapshotClient is true for this
interface. |
| I32 ciscoSnapshotDialerMap | 1.3.6.1.4.1.9.9.19.1.3.1.5 | Integer32 | read-only | Index of the dialer map entry associated with this
snapshot activity record. A value of 0 indicates
that no dialer map is associated with this entry.
An instance of this object will only be present when
the associated value of ciscoSnapshotDialer is true. |
| CIS ciscoSnapshotSourceProtocol | 1.3.6.1.4.1.9.9.19.1.3.1.6 | CiscoNetworkProtocol | read-only | The protocol of the host that initiated the snapshot
routing activity associated with this record.
An instance of this object will only be present when
the associated value of ciscoSnapshotClient is false. |
| ADR ciscoSnapshotSourceAddress | 1.3.6.1.4.1.9.9.19.1.3.1.7 | CiscoNetworkAddress | read-only | The address of the host that initiated the snapshot
routing activity associated with this record.
An instance of this object will only be present when
the associated value of ciscoSnapshotClient is false. |
| OCT ciscoSnapshotProtocolsExchanged | 1.3.6.1.4.1.9.9.19.1.3.1.8 | OCTET STRING | read-only | An array of bits that indicates whether or not routing
information has been exchanged for all protocols. The
most significant bit of the first octet represents the
protocol associated with CiscoNetworkProtocol value of 0;
the least significant bit of the first octet represents
the protocol associated with CiscoNetworkProtocol value
of 7; the most significant bit of the second octet
represents the protocol associated with the
CiscoNetworkProtocol value of 8; and so forth.
Routing information for a given protocol has been exchanged
if the associated bit is set.
An instance of this object will only be present when
the associated value of ciscoSnapshotClient is true. |
| ciscoSnapshotMIBConformance | 1.3.6.1.4.1.9.9.19.2 | | | |
| ciscoSnapshotMIBCompliances | 1.3.6.1.4.1.9.9.19.2.1 | | | |
| ciscoSnapshotMIBCompliance | 1.3.6.1.4.1.9.9.19.2.1.1 | | | The compliance statement for entities which implement
the Cisco Snapshot MIB |
| ciscoSnapshotMIBGroups | 1.3.6.1.4.1.9.9.19.2.2 | | | |
| ciscoSnapshotMIBGroup | 1.3.6.1.4.1.9.9.19.2.2.1 | | | A collection of objects providing snapshot routing
ability to a Cisco agent. |
