CISCO-MOBILE-POLICY-CHARGING-CONTROL-MIB

All MIBs › CISCO-MOBILE-POLICY-CHARGING-CONTROL-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2009-07-10

Category: Cisco Devices, Mobile IP

Description: Manages mobile policy and charging control (PCC) rules and sessions for Cisco mobile packet core elements.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-MOBILE-POLICY-CHARGING-CONTROL-MIB?

CISCO-MOBILE-POLICY-CHARGING-CONTROL-MIB manages the Policy and Charging Control (PCC) function on Cisco mobile packet-core gateways, covering the Gx (3GPP) and Ty (3GPP2) interfaces between the PCEF gateway element and the Policy and Charging Rules Function (PCRF). It exposes configuration/enablement flags for error notifications and, more importantly, global statistics counters for Diameter Credit-Control and Re-Authorization message exchange (CCR/CCA/RAR/RAA). It supports monitoring the software/protocol health of the mobile gateway's policy-charging subsystem — counters like cmpccgsCCRFailures and message-sent/received totals reveal whether the gateway is successfully negotiating policy and charging rules with the PCRF, a leading indicator of session-establishment or billing problems. It explicitly depends on and complements 3GPP Gx/3GPP2 Ty standards and the underlying Diameter protocol used for PCC signaling. Typical deployment is on Cisco mobile packet-core elements (GGSN/PDN gateways) serving 3G UMTS, 4G LTE, 4G WiMax, or CDMA mobile networks, where operators typically begin with a CISCO-MOBILE-POLICY-CHARGING-CONTROL-MIB download to integrate these objects into their NMS.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-MOBILE-POLICY-CHARGING-CONTROL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco mobile packet-core gateways (GGSN/PDN gateway)

Monitoring Examples

An engineer would poll cmpccGlobalStatsTable/cmpccGlobalStatsTableEntry for cmpccgsTotalSessions alongside cmpccgsCCRInitialSent, cmpccgsCCRUpdateSent, and cmpccgsCCRFinalSent to confirm the expected volume of Credit-Control-Request messages is flowing for active PCC sessions. A rising cmpccgsCCRFailures counter relative to cmpccgsCCARecd (Credit-Control-Answers received) would indicate the PCRF is rejecting or failing to respond to rule requests, pointing to a Gx/Ty signaling problem. Enabling cmpccPreloadErrorNotifEnabled and cmpccPreloadRollbackFailedNotifEnabled lets the gateway raise traps when a policy rule preload or rollback operation fails.

What Can Be Monitored

total PCC sessions
CCR initial/update/final messages sent
CCA and RAR messages received
RAA messages sent
CCR failure count
policy preload/rollback failure notifications

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From CISCO-TC

TimeIntervalSec

From ENTITY-MIB

entPhysicalIndex	OBJECT-TYPE
entPhysicalName	OBJECT-TYPE

From HCNUM-TC

CounterBasedGauge64

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using cmpccgsCCRInitialSent OID:

Select a Cisco mobile packet-core gateway (GGSN/PDN gateway) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cmpccgsCCRInitialSent into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of CCR-Initial sent. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoMobilePolicyChargingControlMIB	1.3.6.1.4.1.9.9.690			Mobile PCC Infrastructure built on top of Policy Shim Layer, is a common interface to send and receive PCC related messages for all gateway applications that implement Gx or Ty functionality. Gx is a reference point located between the Policy and Charging Rules Function (PCRF) and the Policy and Charging Enforcement Function (PCEF). Three types of networks namely, 3G UMTS, 4G LTE and 4G WiMax use the 3GPP Gx interface as the standard policy control interface, and CDMA networks use the 3GPP2 Ty interface for the same. This MIB contains the PCC configurations/statistics which are implemented on the Mobile PCC infrastructure. Abbreviations: AAA Authentication, Authorization and Accounting AVP Attribute Value Pair. CCA Credit Control Answer. CCR Credit Control Request. PCC Policy Control and Charging. PCEF Policy and Charging Enforcement Function. PCRF Policy and Charging Rules Function. RAA Re-Authorization Answer. RAR Re-Authorization Request. CP Control Processor. TP Traffic Processor. Preload Object refers to the billing-plans, content-policies, billing-services, accounting policy-maps and service-contents downloaded during PCC through the Gx interface.
ciscoMobilePolicyChargingControlMIBNotifs	1.3.6.1.4.1.9.9.690.0
ciscoMobilePolicyChargingControlMIBObjects	1.3.6.1.4.1.9.9.690.1
NTF ciscoMobilePolicyChargingControlPreloadError	1.3.6.1.4.1.9.9.690.0.1			This notification is issued when cmpccPreloadErrorNotifEnabled is set to true, and an error occurs in preloading as indicated by the value of cmpccppsErrorState: 0 indicates PCRF has sent an incomplete Policy object. 1 indicates a mandatory AVP in the preloading message is missing. 2 indicates PCEF is not able to install/modify/remove a policy preloading object. 3 indicates PCRF sent the preloading objects in wrong order. 4 indicates PCRF tried to preload an object, which is already statically configured in PCEF. 255 indicates no error has occurred so far.
cMobilePolicyChargingControlConfigGroup	1.3.6.1.4.1.9.9.690.2.2.1			This group contains the configuration objects.
cMobilePolicyChargingControlGlobalStatsGroup	1.3.6.1.4.1.9.9.690.2.2.2			This group contains Global Statistics Objects.
cMobilePolicyChargingControlMIBCompliance	1.3.6.1.4.1.9.9.690.2.1.1			The compliance statement for entities which implement the Cisco Mobile Policy Charging Control MIB.
cMobilePolicyChargingControlMIBCompliances	1.3.6.1.4.1.9.9.690.2.1
cMobilePolicyChargingControlMIBCompliancesRev1	1.3.6.1.4.1.9.9.690.2.1.2			The compliance statement for entities which implement the Cisco Mobile Policy Charging Control MIB. This compliance statement deprecates cMobilePolicyChargingControlMIBCompliance.
cMobilePolicyChargingControlMIBConform	1.3.6.1.4.1.9.9.690.2
cMobilePolicyChargingControlMIBGroups	1.3.6.1.4.1.9.9.690.2.2
cMobilePolicyChargingControlNotifEnableGroup	1.3.6.1.4.1.9.9.690.2.2.6			This group contains the flags to enable/disable the mobile policy charging control notification objects.
cMobilePolicyChargingControlNotifGroup	1.3.6.1.4.1.9.9.690.2.2.5			This group contains the mobile policy charging control notification objects.
cMobilePolicyChargingControlPCRFMethodListStatsGroup	1.3.6.1.4.1.9.9.690.2.2.3			This group contains PCRF Method List Stats objects.
cMobilePolicyChargingControlPolicyPreloadStatsGroup	1.3.6.1.4.1.9.9.690.2.2.4			This group contains the policy preload stats objects.
cmpccConfig	1.3.6.1.4.1.9.9.690.1.1
STR cmpccDestinationRealmString	1.3.6.1.4.1.9.9.690.1.1.5	SnmpAdminString	read-write	Defines a destination realm to be used in CCR Initial requests for Policy Preloading. If a destination-realm for a profile is not specified, the destination-realm configured at global level can be selected.
cmpccGlobalStatsTable	1.3.6.1.4.1.9.9.690.1.2.1		not-accessible	This table contains the global statistics and counters pertaining to mobile policy charging control requests and responses to policy server.
cmpccGlobalStatsTableEntry	1.3.6.1.4.1.9.9.690.1.2.1.1		not-accessible	An entry (conceptual row) in the cmpccGlobalStatsTable. entPhysicalIndex identifies the entity that implements the PCEF functionality of the Gx interface. An entry will be added, when a Gx interface is identified and modelled in entityMIB, and removed when the corresponding Gx interface entry will be deleted from entityMIB.
C64 cmpccgsCCAErrors	1.3.6.1.4.1.9.9.690.1.2.1.1.11	Counter64	read-only	This object represents the total number of errors occurred in CCA.
C64 cmpccgsCCARecd	1.3.6.1.4.1.9.9.690.1.2.1.1.5	Counter64	read-only	The total number of CCA received.
C64 cmpccgsCCRFailures	1.3.6.1.4.1.9.9.690.1.2.1.1.8	Counter64	read-only	The number of failures to send CCR.
C64 cmpccgsCCRFinalSent	1.3.6.1.4.1.9.9.690.1.2.1.1.4	Counter64	read-only	The total number of CCR-final sent.
C64 cmpccgsCCRInitialSentEx	1.3.6.1.4.1.9.9.690.1.2.1.1.2	Counter64	read-only	The total number of CCR-Initial sent.
C64 cmpccgsCCRUpdateSent	1.3.6.1.4.1.9.9.690.1.2.1.1.3	Counter64	read-only	The total number of CCR-update sent.
C64 cmpccgsDuplicateRequests	1.3.6.1.4.1.9.9.690.1.2.1.1.10	Counter64	read-only	Total number of duplicate request type errors. This object represents the number of times the mpcc receives a CCR initial request for a session that already exists. When session already exists, mpcc expects to receive a CCR Update.
C64 cmpccgsMessageTypeInvalid	1.3.6.1.4.1.9.9.690.1.2.1.1.9	Counter64	read-only	Total number of invalid message type errors.
C64 cmpccgsRAAFailures	1.3.6.1.4.1.9.9.690.1.2.1.1.12	Counter64	read-only	The number of failures to send RAA.
C64 cmpccgsRAASent	1.3.6.1.4.1.9.9.690.1.2.1.1.7	Counter64	read-only	The total number of RAA sent.
C64 cmpccgsRARErrors	1.3.6.1.4.1.9.9.690.1.2.1.1.13	Counter64	read-only	This object represents the total number of errors occurred in RAR.
C64 cmpccgsRARRecd	1.3.6.1.4.1.9.9.690.1.2.1.1.6	Counter64	read-only	The total number of RAR received.
C64 cmpccgsReqNumInvalid	1.3.6.1.4.1.9.9.690.1.2.1.1.15	Counter64	read-only	The number of errors due to invalid request number.
C64 cmpccgsReqStatusInvalid	1.3.6.1.4.1.9.9.690.1.2.1.1.16	Counter64	read-only	The number of errors due to invalid request status.
C64 cmpccgsReqTypeInvalid	1.3.6.1.4.1.9.9.690.1.2.1.1.14	Counter64	read-only	The number of errors due to invalid request type.
C64 cmpccgsSessionIDInvalid	1.3.6.1.4.1.9.9.690.1.2.1.1.17	Counter64	read-only	This object represents the number of times the session id received does not exist or when the session id associated with request is not the same as the one received.
NUM cmpccgsTotalSessions	1.3.6.1.4.1.9.9.690.1.2.1.1.1	CounterBasedGauge64	read-only	The total number of sessions which are active.
STR cmpccMethodListPreload	1.3.6.1.4.1.9.9.690.1.1.4	SnmpAdminString	read-write	Defines a method-list to be used for requests to PCRF for Policy preloading.
cmpccNotifConfig	1.3.6.1.4.1.9.9.690.1.3
STR cmpccpcDestinationRealm	1.3.6.1.4.1.9.9.690.1.1.1.1.3	SnmpAdminString	read-create	Specifies the destination realm to be sent in CCR initial requests to the PCRF. For subsequent CCRs, the Origin-Realm AVP received in the last CCA is used as the Destination-Realm.
STR cmpccpcMethodList	1.3.6.1.4.1.9.9.690.1.1.1.1.2	SnmpAdminString	not-accessible	Name of the AAA method-list. The AAA method list points to the PCRF IP address through the AAA server group configuration.
STR cmpccpcProfileName	1.3.6.1.4.1.9.9.690.1.1.1.1.1	SnmpAdminString	not-accessible	Name of the PCC profile.
cmpccPCRFMethodListStatsTable	1.3.6.1.4.1.9.9.690.1.2.2		not-accessible	This table contains statistics/error counters related to a given PCRF method-list name.
cmpccPCRFMethodListStatsTableEntry	1.3.6.1.4.1.9.9.690.1.2.2.1		not-accessible	An entry (conceptual row) in the cmpccPCRFMethodListStatsTable.
ROW cmpccpcRowStatus	1.3.6.1.4.1.9.9.690.1.1.1.1.4	RowStatus	read-create	This object only facilitates the creation or deletion of a conceptual row in this table. The PCC Profile name and AAA method-list name are mandatory fields for this row to be active.
C64 cmpccpmlsCCAErrors	1.3.6.1.4.1.9.9.690.1.2.2.1.12	Counter64	read-only	This object represents the total number of errors occurred in CCA.
C64 cmpccpmlsCCARecd	1.3.6.1.4.1.9.9.690.1.2.2.1.5	Counter64	read-only	The number of CCA received.
C64 cmpccpmlsCCRFailures	1.3.6.1.4.1.9.9.690.1.2.2.1.9	Counter64	read-only	The number of failures to send CCR.
C64 cmpccpmlsCCRFinalSent	1.3.6.1.4.1.9.9.690.1.2.2.1.4	Counter64	read-only	The number of CCR-final sent.
C64 cmpccpmlsCCRInitialSent	1.3.6.1.4.1.9.9.690.1.2.2.1.2	Counter64	read-only	The number of CCR-Initial Sent.
C64 cmpccpmlsCCRUpdateSent	1.3.6.1.4.1.9.9.690.1.2.2.1.3	Counter64	read-only	The number of CCR-update sent.
C64 cmpccpmlsDuplicateRequests	1.3.6.1.4.1.9.9.690.1.2.2.1.11	Counter64	read-only	The number of duplicate request type errors.
C64 cmpccpmlsMessageTypeInvalid	1.3.6.1.4.1.9.9.690.1.2.2.1.10	Counter64	read-only	The number of invalid message type errors.
STR cmpccpmlsMethodList	1.3.6.1.4.1.9.9.690.1.2.2.1.1	SnmpAdminString	not-accessible	The Method-list associated with the session.
C64 cmpccpmlsPCRFReboots	1.3.6.1.4.1.9.9.690.1.2.2.1.8	Counter64	read-only	The number of times PCRF reboots.
C64 cmpccpmlsRAAFailures	1.3.6.1.4.1.9.9.690.1.2.2.1.13	Counter64	read-only	The number of failures to send RAA.
C64 cmpccpmlsRAASent	1.3.6.1.4.1.9.9.690.1.2.2.1.7	Counter64	read-only	The number of RAA sent.
C64 cmpccpmlsRARErrors	1.3.6.1.4.1.9.9.690.1.2.2.1.14	Counter64	read-only	This object represents the total number of errors occurred in RAR.
C64 cmpccpmlsRARRecd	1.3.6.1.4.1.9.9.690.1.2.2.1.6	Counter64	read-only	The number of RAR received.
C64 cmpccpmlsReqNumInvalid	1.3.6.1.4.1.9.9.690.1.2.2.1.16	Counter64	read-only	The number of errors due to invalid request number.
C64 cmpccpmlsReqStatusInvalid	1.3.6.1.4.1.9.9.690.1.2.2.1.17	Counter64	read-only	The number of errors due to invalid request status.
C64 cmpccpmlsReqTypeInvalid	1.3.6.1.4.1.9.9.690.1.2.2.1.15	Counter64	read-only	The number of errors due to invalid request type.
C64 cmpccpmlsSessionIDInvalid	1.3.6.1.4.1.9.9.690.1.2.2.1.18	Counter64	read-only	This object represents the number of times the session id received does not exist or when the session id associated with request is not the same as the one received.
C64 cmpccPolicyMismatch	1.3.6.1.4.1.9.9.690.1.2.5	Counter64	read-only	This object denotes the number of policy mismatch. It increments whenever any subscriber has a policy mismatch. A policy mismatch occurs when the traffic flow does not match the configured policy for the particular subscriber.
cmpccPolicyMismatchGroup	1.3.6.1.4.1.9.9.690.2.2.10			A collection of object(s) which provides information about policy mismatch.
cmpccPolicyPreloadExtStatsTable	1.3.6.1.4.1.9.9.690.1.2.4		not-accessible	This table contains the additional statistics related to objects downloaded during policy preloading. The table is indexed on entPhysicalIndex which identifies the entity that implements the PCEF functionality of the Gx interface.
cmpccPolicyPreloadExtStatsTableEntry	1.3.6.1.4.1.9.9.690.1.2.4.1		not-accessible	A row in cmpccPolicyPreloadExtStatsTable. Each entry represents the policy preload statistics for a particular Gx interface. An entry will be added in this table when a Gx interface is identified and modelled in entityMIB. When Gx interface entry is removed from entityMIB, the corresponding entry is removed from this table.
cmpccPolicyPreloadNotifGroup	1.3.6.1.4.1.9.9.690.2.2.8			A collection of notifications which provides information about errors encountered during policy preloading.
cmpccPolicyPreloadStatsTable	1.3.6.1.4.1.9.9.690.1.2.3		not-accessible	This table contains the policy preload statistics/error counters.
cmpccPolicyPreloadStatsTableEntry	1.3.6.1.4.1.9.9.690.1.2.3.1		not-accessible	An entry (conceptual row) in the cmpccPolicyPreloadStatsTable. entPhysicalIndex identifies the entity that implements the PCEF functionality of the Gx interface. An entry will be added, when a Gx interface is identified and modelled in entityMIB, and removed when the corresponding Gx interface entry will be deleted from entityMIB.
C32 cmpccppsAcctPolicyMapsDeleted	1.3.6.1.4.1.9.9.690.1.2.4.1.8	Counter32	read-only	The number of accounting policy-maps deleted during preload.
C32 cmpccppsAcctPolicyMapsDeleteFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.11	Counter32	read-only	The number of times deletion of accounting policy-maps has failed during preload.
C32 cmpccppsAcctPolicyMapsInserted	1.3.6.1.4.1.9.9.690.1.2.4.1.7	Counter32	read-only	The number of accounting policy-maps inserted during preload. The accounting policy-maps are used to match URLs or headers against a pattern, to determine whether flows will be processed by the accounting services.
C32 cmpccppsAcctPolicyMapsInsertFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.10	Counter32	read-only	The number of times insertion of accounting policy-maps has failed during preload.
C32 cmpccppsAcctPolicyMapsRollbackFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.12	Counter32	read-only	The number of times rollback has failed on insertion/deletion of accounting policy-maps during preload.
C32 cmpccppsAcctPolicyMapsRolledback	1.3.6.1.4.1.9.9.690.1.2.4.1.9	Counter32	read-only	The number of times rollback is successful on insertion/deletion of accounting policy-maps during preload. Rollback is performed when policy preload insertion/deletion has failed on one or more of the TPs on Active or Standby processor or on the Standby CP.
C32 cmpccppsAVPMissing	1.3.6.1.4.1.9.9.690.1.2.3.1.10	Counter32	read-only	The number of times the mandatory AVPs are missing.
C32 cmpccppsBillingPlansDeleted	1.3.6.1.4.1.9.9.690.1.2.4.1.26	Counter32	read-only	The number of billing-plans deleted during preload.
C32 cmpccppsBillingPlansDeleteFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.29	Counter32	read-only	The number of times deletion of billing-plans has failed during preload.
C32 cmpccppsBillingPlansInserted	1.3.6.1.4.1.9.9.690.1.2.4.1.25	Counter32	read-only	The number of billing-plans inserted during preload.
C32 cmpccppsBillingPlansInsertFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.28	Counter32	read-only	The number of times insertion of billing-plans has failed during preload.
C32 cmpccppsBillingPlansRollbackFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.30	Counter32	read-only	The number of times rollback has failed on insertion/deletion of billing-plans during preload.
C32 cmpccppsBillingPlansRolledback	1.3.6.1.4.1.9.9.690.1.2.4.1.27	Counter32	read-only	The number of times rollback is successful on insertion/deletion of billing-plans during preload. Rollback is performed when policy preload insertion/deletion has failed on one or more of the TPs on Active or Standby processor or on the Standby CP.
C32 cmpccppsBillingServicesDeleted	1.3.6.1.4.1.9.9.690.1.2.4.1.14	Counter32	read-only	The number of billing-services deleted during preload.
C32 cmpccppsBillingServicesDeleteFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.17	Counter32	read-only	The number of times deletion of billing-services has failed during preload.
C32 cmpccppsBillingServicesInserted	1.3.6.1.4.1.9.9.690.1.2.4.1.13	Counter32	read-only	The number of billing-services inserted during preload. Each billing-service represents a group of content that is billed the same way, such as billing per-click (or per-request) or billing per-IP byte, and that shares part of a subscriber quota.
C32 cmpccppsBillingServicesInsertFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.16	Counter32	read-only	The number of times insertion of billing-services has failed during preload.
C32 cmpccppsBillingServicesRollbackFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.18	Counter32	read-only	The number of times rollback has failed on insertion/deletion of billing-services during preload.
C32 cmpccppsBillingServicesRolledback	1.3.6.1.4.1.9.9.690.1.2.4.1.15	Counter32	read-only	The number of times rollback is successful on insertion/deletion of billing-services during preload. Rollback is performed when policy preload insertion/deletion has failed on one or more of the TPs on Active or Standby processor or on the Standby CP.
C32 cmpccppsCCAErrors	1.3.6.1.4.1.9.9.690.1.2.3.1.16	Counter32	read-only	This object represents the total number of errors occurred in CCA.
C32 cmpccppsCCRFailures	1.3.6.1.4.1.9.9.690.1.2.3.1.14	Counter32	read-only	The number of times failed to send CCR.
C32 cmpccppsContentPoliciesDeleted	1.3.6.1.4.1.9.9.690.1.2.4.1.20	Counter32	read-only	The number of content-policies deleted during preload.
C32 cmpccppsContentPoliciesDeleteFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.23	Counter32	read-only	The number of times deletion of content-policies has failed during preload.
C32 cmpccppsContentPoliciesInserted	1.3.6.1.4.1.9.9.690.1.2.4.1.19	Counter32	read-only	The number of content-policies inserted during preload.
C32 cmpccppsContentPoliciesInsertFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.22	Counter32	read-only	The number of times insertion of content-policies has failed during preload.
C32 cmpccppsContentPoliciesRollbackFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.24	Counter32	read-only	The number of times rollback has failed on insertion/deletion of content-policies during preload.
C32 cmpccppsContentPoliciesRolledback	1.3.6.1.4.1.9.9.690.1.2.4.1.21	Counter32	read-only	The number of times rollback is successful on insertion/deletion of content-policies during preload. Rollback is performed when policy preload insertion/deletion has failed on one or more of the TPs on Active or Standby processor or on the Standby CP.
C32 cmpccppsEnforceFailures	1.3.6.1.4.1.9.9.690.1.2.3.1.12	Counter32	read-only	The number of failures to enforce.
INT cmpccppsErrorState	1.3.6.1.4.1.9.9.690.1.2.3.1.8	INTEGER	read-only	Specifies the error condition. 'preloadInconsistentData' indicates PCRF has sent an incomplete Policy object. 'preloadAVPMissing' indicates a mandatory AVP in the preloading message is missing. 'preloadEnforceFailure' indicates PCEF is not able to install/modify/remove a policy preloading object. 'preloadWrongOrderFailure' indicates PCRF sent the preloading objects in wrong order. 'preloadStaticConfigConflict' indicates PCRF tried to preload an object, which is already statically configured in PCEF. 'preloadNoError' indicates no error has occurred so far.
C32 cmpccppsGlobalPolicyPush	1.3.6.1.4.1.9.9.690.1.2.3.1.6	Counter32	read-only	The number of Global Policy Push.
C32 cmpccppsGlobalPolicyPushAck	1.3.6.1.4.1.9.9.690.1.2.3.1.7	Counter32	read-only	The number of Global Policy Push Acknowledgements.
C32 cmpccppsMessageTypeInvalid	1.3.6.1.4.1.9.9.690.1.2.3.1.15	Counter32	read-only	The number of invalid message type errors.
C32 cmpccppsPCEFInit	1.3.6.1.4.1.9.9.690.1.2.3.1.2	Counter32	read-only	The number of PCEF initiated preloading.
C32 cmpccppsPCRFInit	1.3.6.1.4.1.9.9.690.1.2.3.1.3	Counter32	read-only	The number of PCRF initiated preloading.
INT cmpccppsPolicyPreloadStatus	1.3.6.1.4.1.9.9.690.1.2.3.1.1	INTEGER	read-only	This object denotes the state of policy preloading in the PCC. 'preloadNotInitiated' indicates that policy preloading has not been initiated. 'preloadInProgress' indicates that policy preloading is in progress. 'preloadFailed' indicates that policy preloading has failed. 'preloadTimeout' indicates that timeout has occured. 'preloadComplete' indicates that policy preloading is complete.
C32 cmpccppsPreloadDataInconsistent	1.3.6.1.4.1.9.9.690.1.2.3.1.9	Counter32	read-only	The number of times the preload data is inconsistent.
C32 cmpccppsRAAFailed	1.3.6.1.4.1.9.9.690.1.2.3.1.17	Counter32	read-only	The number of times failed to send RAA.
C32 cmpccppsRARErrors	1.3.6.1.4.1.9.9.690.1.2.3.1.18	Counter32	read-only	This object represents the total number of errors occurred in RAR.
C32 cmpccppsReq	1.3.6.1.4.1.9.9.690.1.2.3.1.4	Counter32	read-only	The number of Policy Preload requests.
C32 cmpccppsReqNumInvalid	1.3.6.1.4.1.9.9.690.1.2.3.1.20	Counter32	read-only	The number of invalid req-num errors.
C32 cmpccppsReqStatusInvalid	1.3.6.1.4.1.9.9.690.1.2.3.1.21	Counter32	read-only	The number of invalid req-status errors.
C32 cmpccppsReqTypeInvalid	1.3.6.1.4.1.9.9.690.1.2.3.1.19	Counter32	read-only	The number of invalid req-type errors.
C32 cmpccppsRes	1.3.6.1.4.1.9.9.690.1.2.3.1.5	Counter32	read-only	The number of Policy Preload responses.
C32 cmpccppsServiceContentsDeleted	1.3.6.1.4.1.9.9.690.1.2.4.1.2	Counter32	read-only	The number of service-contents deleted during preload.
C32 cmpccppsServiceContentsDeleteFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.5	Counter32	read-only	The number of times deletion of service-contents has failed during preload.
C32 cmpccppsServiceContentsInserted	1.3.6.1.4.1.9.9.690.1.2.4.1.1	Counter32	read-only	The number of service-contents inserted during preload. A service-content configuration contains the following information: Layer 3 information that specifies the IP-level details of the content. Layer 4 information that specifies transport layer parameters, such as TCP and User Datagram Protocol (UDP) port numbers.
C32 cmpccppsServiceContentsInsertFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.4	Counter32	read-only	The number of times insertion of service-contents has failed during preload.
C32 cmpccppsServiceContentsRollbackFailed	1.3.6.1.4.1.9.9.690.1.2.4.1.6	Counter32	read-only	The number of times rollback has failed on insertion/deletion of service-contents during preload.
C32 cmpccppsServiceContentsRolledback	1.3.6.1.4.1.9.9.690.1.2.4.1.3	Counter32	read-only	The number of times rollback is successful on insertion/deletion of service-contents during preload. Rollback is performed when policy preload insertion/deletion has failed on one or more of the TPs on Active or Standby processor or on the Standby CP.
C32 cmpccppsSessionIDInvalid	1.3.6.1.4.1.9.9.690.1.2.3.1.22	Counter32	read-only	This object represents the number of times the session id received does not exist or when the session id associated with request is not the same as the one received.
C32 cmpccppsStaticConfigConflicts	1.3.6.1.4.1.9.9.690.1.2.3.1.13	Counter32	read-only	The number of conflicts with static config.
C32 cmpccppsTimeoutErrors	1.3.6.1.4.1.9.9.690.1.2.3.1.23	Counter32	read-only	The number of times the preload timeout occurs.
C32 cmpccppsWrongOrderFailures	1.3.6.1.4.1.9.9.690.1.2.3.1.11	Counter32	read-only	The number of failures due to wrong order.
T/F cmpccPreloadEnable	1.3.6.1.4.1.9.9.690.1.1.2	TruthValue	read-write	Enables preloading on PCC. 'true' indicates preloading is enabled. 'false' indicates preloading is disabled.
T/F cmpccPreloadErrorNotifEnabled	1.3.6.1.4.1.9.9.690.1.3.1	TruthValue	read-write	This object controls the generation of the preload error notification ( ciscoMobilePolicyChargingControlPreloadError ). 'true' indicates that preload error notification is enabled. 'false' indicates that notification is disabled.
cmpccPreloadNotifControlGroup	1.3.6.1.4.1.9.9.690.2.2.9			A collection of object(s) which provides preload notification control configuration.
NTF cmpccPreloadRollbackFailed	1.3.6.1.4.1.9.9.690.0.2			This notification is generated when rollback of an object fails, which indicates that object could be out of sync. The cmpccppsRollbackFailedReason present in the varbind list, indicates the reason that triggers the sending for 'cmpccPreloadRollbackFailed' notification. The entPhysicalName identifies the entity that implements the PCEF functionality of the Gx interface.
T/F cmpccPreloadRollbackFailedNotifEnabled	1.3.6.1.4.1.9.9.690.1.3.2	TruthValue	read-write	This object controls the generation of cmpccPreloadRollbackFailed notification. 'true' indicates that generation of cmpccPreloadRollbackFailed is enabled. 'false' indicates that generation of cmpccPreloadRollbackFailed is disabled.
NUM cmpccPreloadTimeout	1.3.6.1.4.1.9.9.690.1.1.6	TimeIntervalSec	read-write	Specifies the maximum time in seconds in which the Policy Preloading can take place.
cmpccProfileConfigTable	1.3.6.1.4.1.9.9.690.1.1.1		not-accessible	This table contains the objects for configuring a given profile name and its associated method-list names using the RowStatus textual convention. The mpcc loadbalances the Gx requests to PCRF across these method lists that are configured. Each profile allows upto a maximum of 16 method-lists configured in it.
cmpccProfileConfigTableEntry	1.3.6.1.4.1.9.9.690.1.1.1.1		not-accessible	Each entry in the cmpccProfileConfigTable provides information about the profile name and its associated method-list name.
STR cmpccProfileDefault	1.3.6.1.4.1.9.9.690.1.1.3	SnmpAdminString	read-write	Defines a default profile to be used for requests to PCRF for user-level charging rules.
cmpccRollbackFailedGroup	1.3.6.1.4.1.9.9.690.2.2.11			A collection of object(s) which provides information about the reason that triggers the sending for 'cmpccPreloadRollbackFailed' notification.
INT cmpccRollbackFailedReason	1.3.6.1.4.1.9.9.690.1.2.6	INTEGER	read-only	This object indicates the reason that triggers the sending for 'cmpccPreloadRollbackFailed' notification. When read, this object always returns the value 'none'. Other values are relevant when this object is used as a varbind in a notification. 'none' indicates no rollback failure has occurred. 'acctPolicyMap' indicates rollback for accounting policy-map has failed. 'contentPolicy' indicates rollback for content-policy has failed. 'serviceContent' indicates rollback for service-content has failed. 'billingService' indicates rollback for billing-service has failed. 'billingPlan' indicates rollback for billing-plan has failed.
cmpccStatisticsExtGroup	1.3.6.1.4.1.9.9.690.2.2.7			A collection of objects which provide additional statistics related to objects downloaded during policy preloading.
cmpccStats	1.3.6.1.4.1.9.9.690.1.2

RFC description

Cisco mobile policy control and charging MIB managing PCRF/PCEF interactions for 3G/4G/WiMax networks.

Start monitoring Cisco mobile packet-core gateways (GGSN/PDN gateway) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-MOBILE-POLICY-CHARGING-CONTROL-MIB