CISCO-DMN-DSG-TRANSCODE-MIB

All MIBs › CISCO-DMN-DSG-TRANSCODE-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2013-07-10

Category: Cisco Devices, Satellite

Description: Manages video and audio transcoding configuration and job status on the Cisco DMN D9800 digital satellite gateway.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-DMN-DSG-TRANSCODE-MIB?

CISCO-DMN-DSG-TRANSCODE-MIB, the Transcode MIB, is part of Cisco's Digital Media Network Digital Satellite Gateway family, covering the configuration and status of video/audio transcoding functions on D9800-series gateways. It exposes per-channel transcoder configuration objects such as vertical resolution, closed-caption packet mapping, and PCR rate, along with status/informational tables reflecting current transcoder operation. Its main monitoring value is confirming the operational status of the transcoding software/hardware pipeline, letting an operator verify that a configured transcode job (indexed by transcoderCfgIndex) is applying settings correctly and running rather than stalled or in an error state, via transcoderInfo and transcoderTable. As a Cisco-specific media-processing MIB it has no significant dependency on external standard MIBs beyond general SNMP table conventions. It is deployed in cable/satellite headends where incoming video/audio streams must be transcoded before distribution to subscribers. Engineers can download the CISCO-DMN-DSG-TRANSCODE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-DMN-DSG-TRANSCODE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco D9800 digital satellite gateway (transcoding module)

Monitoring Examples

An engineer would poll transcoderCfgTable (via transcoderCfgEntry, keyed by transcoderCfgIndex) to check transcoderCfgVRes and transcoderCfgPCRRate against expected values, then cross-reference transcoderTable/transcoderInfo to confirm the transcoder job is actively processing the configured stream. If transcoderCfgApplyInband shows a configuration failed to apply, or the transcoder status in transcoderTable indicates it has stopped, viewers downstream would experience lost or degraded video, prompting a transcoderLOIAction reset. Checking transcoderCfgCCPkt1/2/3 helps confirm closed-caption packet insertion is still correctly mapped after a config change.

What Can Be Monitored

transcode job configuration status
vertical resolution setting
PCR rate
closed-caption packet mapping
transcoder operational state

Imported Objects

From CISCO-DMN-DSG-ROOT-MIB

ciscoDSGUtilities

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoDSGTranscode	1.3.6.1.4.1.1429.2.2.5.37			Cisco Transcode MIB.
transcoderInfo	1.3.6.1.4.1.1429.2.2.5.37.1
INT transcoderLOIAction	1.3.6.1.4.1.1429.2.2.5.37.1.1	INTEGER	read-write	Select whether outputs should transmit black or not transmit any data when there is a loss of input.
transcoderTable	1.3.6.1.4.1.1429.2.2.5.37.2
transcoderCfgTable	1.3.6.1.4.1.1429.2.2.5.37.2.1		not-accessible	Transcoder Configuration Table.
transcoderCfgEntry	1.3.6.1.4.1.1429.2.2.5.37.2.1.1		not-accessible	Entry for Transcoder configuration table.
I32 transcoderCfgIndex	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.1	Integer32	read-only	Transcoder index.
INT transcoderCfgApplyInband	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.2	INTEGER	read-write	Apply in band transcoder parameters.
INT transcoderCfgVRes	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.3	INTEGER	read-write	Selection for Vertical resolution.
INT transcoderCfgCCPkt1	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.4	INTEGER	read-write	Transcode Closed Caption Packet 1.
INT transcoderCfgCCPkt2	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.5	INTEGER	read-write	Transcode Closed Caption Packet 2.
INT transcoderCfgCCPkt3	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.6	INTEGER	read-only	Transcode Closed Caption Packet 3.
INT transcoderCfgPCRRate	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.7	INTEGER	read-only	PCR insertion rate in milliseconds.
INT transcoderCfgHDHRes	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.8	INTEGER	read-write	High Definition Horizontal Resolution.
INT transcoderCfgHDBitrateMode	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.9	INTEGER	read-write	HD Bit rate mode selection : Constant Bit Rate( cbr )/ Variable Bit Rate ( vbr ).
INT transcoderCfgHDBitRate	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.10	INTEGER	read-write	HD bit rate in steps of 400bps. The Lower Limit is 8Mbps for D9859 and 10Mbps for D9858.
INT transcoderCfgHDGOP	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.11	INTEGER	read-write	HD GOP selection.
INT transcoderCfgHDManualGOP	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.12	INTEGER	read-write	HD Manual GOP selection.
INT transcoderCfgHD32PullDown	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.13	INTEGER	read-write	3-2 Pulldown enabling.
INT transcoderCfgHDAspectRatio	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.14	INTEGER	read-only	HD Output Aspect ratio.
INT transcoderCfgHDARConversion	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.15	INTEGER	read-only	HD Aspect ratio conversion.
INT transcoderCfgHDVideoPreproc	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.16	INTEGER	read-only	Transcode HD Video Pre-processing.
INT transcoderCfgSDHRes	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.17	INTEGER	read-write	Standard Definition Horizontal Resolution.
INT transcoderCfgSDBitRateMode	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.18	INTEGER	read-write	Transcode SD bit rate mode : Constant Bit Rate mode ( cbr )/ Variable Bit Rate mode ( vbr ).
INT transcoderCfgSDBitRate	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.19	INTEGER	read-write	SD Bit rate in steps of 400.
INT transcoderCfgSDGOP	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.20	INTEGER	read-write	Transcode SD Group of Pictures-Format : Transparent/ Manual.
INT transcoderCfgSDManualGOP	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.21	INTEGER	read-write	Transcode SD Manual Group of Pictures - Format values.
INT transcoderCfgSD32PullDown	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.22	INTEGER	read-write	Transcode SD 3:2 Pulldown: Enabled/ disabled.
INT transcoderCfgSDAspectRatio	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.23	INTEGER	read-write	Transcode SD Aspect ratio.
INT transcoderCfgSDARConversion	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.24	INTEGER	read-write	Transcode SD Aspect ratio conversion.
INT transcoderCfgSDVideoPreproc	1.3.6.1.4.1.1429.2.2.5.37.2.1.1.25	INTEGER	read-only	Transcode SD Video Pre-processing.
transcoderStatusTable	1.3.6.1.4.1.1429.2.2.5.37.2.2		not-accessible	Transcoder status Table.
transcoderStatusEntry	1.3.6.1.4.1.1429.2.2.5.37.2.2.1		not-accessible	Entry for transcoder status table.
I32 transcoderStatusIndex	1.3.6.1.4.1.1429.2.2.5.37.2.2.1.1	Integer32	read-only	Trancoder status index.
INT transcoderStatusVideoStream	1.3.6.1.4.1.1429.2.2.5.37.2.2.1.2	INTEGER	read-only	Incoming stream format.
transcoderSubtTable	1.3.6.1.4.1.1429.2.2.5.37.2.3		not-accessible	Transcoder Subtitle Table.
transcoderSubtEntry	1.3.6.1.4.1.1429.2.2.5.37.2.3.1		not-accessible	Entry for transcoder subtitle burn-in table.
I32 transcoderSubtIndex	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.1	Integer32	read-only	Trancoder subtitle burn-in index.
INT transcoderSubtOpMode	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.2	INTEGER	read-write	Subtitle Burn-In Subtitles Mode: On/Off/Imitext/DVB.
INT transcoderSubtLangMenu	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.3	INTEGER	read-write	Subtitle Burn-In Language Preference by Language List, PMT Order or Manual Entry.
INT transcoderSubtLangList	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.4	INTEGER	read-write	Subtitle Burn-In MPEG Languages Codes from the Language List.
INT transcoderSubtPMTOrder	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.5	INTEGER	read-write	Subtitle Burn-In For Multiple Subtitle PIDs Select 1st, 2nd, 3rd, etc.
STR transcoderSubtManualEntry	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.6	DisplayString	read-write	Subtitle Burn-In Preferred Language Code.
INT transcoderSubtImitextPos	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.7	INTEGER	read-write	Subtitle Burn-In Imitext Positioning: Standard/Extended.
INT transcoderSubtForeGround	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.8	INTEGER	read-write	Subtitle Burn-In Imitext Foreground Colour: Yellow/White/Auto.
INT transcoderSubtBackGround	1.3.6.1.4.1.1429.2.2.5.37.2.3.1.9	INTEGER	read-write	Subtitle Burn-In Imitext Background Colour: None/Auto/Shadow/Opaque/Semi.

RFC description

Manages video transcoding operations on Cisco Digital Media Systems, including transcoder configuration and status monitoring.

Start monitoring Cisco DMN D9800 digital satellite gateway with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-DMN-DSG-TRANSCODE-MIB

What Is CISCO-DMN-DSG-TRANSCODE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description