CISCO-CASA-FA-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-CASA-FA-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2002-09-18

Category: Cisco Devices

Description: Manages Cisco CASA forwarding agent configuration for server load balancing.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-CASA-FA-MIB?

CISCO-CASA-FA-MIB is a Cisco Systems, Inc. proprietary MIB (used with CISCO-CASA-MIB) managing the CASA (Cisco Appliance Services Architecture) Forwarding Agent, which redirects flows to service appliances. Its wildcard-affinity objects cover total bytes/HC-bytes/packets, entry count, notification-enable flag, high-water-mark and reset action, deny/drop counts, and a wildcard-affinity table (index, source/destination address and port, protocol, fragment flag, source/destination mask, service-manager address/port, bytes/HC-bytes, packets). As a configuration/performance MIB it lets an administrator confirm which flows are being redirected to a CASA service appliance and watch denied/dropped-flow counts. It is deployed on Cisco Systems CASA-enabled network equipment. Engineers can download the CISCO-CASA-FA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-CASA-FA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Cisco Systems CASA-enabled network equipment

Monitoring Examples

An administrator checks ccfaWildcardAffDenies and ccfaWildcardAffDrops to diagnose flows being rejected by a CASA Forwarding Agent on Cisco equipment.

What Can Be Monitored

  • CASA flow redirection and deny/drop statistics
Imported Objects

From CISCO-SMI

ciscoMgmtOBJECT-IDENTITY

From CISCO-TC

CiscoIpProtocol
CiscoPort

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using ccfaWildcardAffTotalBytes OID:

Select a Cisco CASA-enabled network equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ccfaWildcardAffTotalBytes into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of bytes of data for all the packets which matched any Wildcard Affinity. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in bytes), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Cisco Appliance Services Architecture (CASA) forwarding agent management and traffic rule handling.

Start monitoring Cisco CASA-enabled network equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-CASA-FA-MIB