All MIBs › CISCO-OPTICAL-OTS-MIB
Organization: Cisco Systems, Inc.
Last Updated: 2020-04-08
Category: Cisco Devices, Optical and WDM
Description: Manages Optical Transport Section (OTS) layer parameters including amplifier and span configuration on DWDM systems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-OPTICAL-OTS-MIB?
This is a Cisco MIB for the Optical Transport Section (OTS) layer of DWDM optical transport systems, covering physical amplifier and span-level characteristics of optical line systems. It exposes controller-level objects for port type, laser status, received/transmitted optical power, total RX/TX power, amplifier gain and tilt, and variable optical attenuator (VOA) settings, plus performance-monitoring thresholds and notifications. Its monitoring emphasis is squarely on optical hardware health — laser status and RX/TX power readings reveal whether an amplifier or transceiver is degrading or has failed, and threshold-crossing notifications flag early signs of fiber-span or amplifier problems before a full outage occurs. It is Cisco-specific and is used alongside related Cisco optical MIBs for other layers (OMS, OCH) to build a complete DWDM transport picture. It is deployed on Cisco DWDM/optical transport platforms (e.g. ONS/NCS optical line systems) in long-haul and metro optical transport networks. Engineers can download the CISCO-OPTICAL-OTS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-OPTICAL-OTS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco DWDM optical transport/line system (e.g. ONS/NCS platform)
Monitoring Examples
An administrator would poll cooOtsControllerTable/cooOtsControllerEntry to read cooOtsControllerLaserStatus, cooOtsControllerRXPower, and cooOtsControllerTXPower per cooOtsControllerPortType, alongside cooOtsControllerAmpliGain and cooOtsControllerAmpliTilt for each amplifier stage. A drop in cooOtsControllerTotalRXPower combined with a laser status change would signal amplifier or fiber-span degradation, triggering a cooOtsNotifEnabled-driven threshold-crossing alert before the link fully fails.
What Can Be Monitored
- laser status
- RX/TX optical power
- total RX/TX power
- amplifier gain and tilt
- VOA attenuation
This MIB depends on
Related MIBs
Imported Objects
From CISCO-OPTICAL-MIB
| CoiIntervalType | |
| CoiOptAlarmServiceAffecting | |
| CoiOptAlarmSeverity | |
| CoiOptAlarmStatus | |
| CoiOptAlarmType | |
| CoiOpticalPower | |
| CoiOpticalWavelength |
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From IF-MIB
| ifIndex | OBJECT-TYPE |
| ifName | OBJECT-TYPE |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ciscoOpticalOtsMIB | 1.3.6.1.4.1.9.9.834 | This MIB module defines the managed objects and statistics objects for physical layer characteristics of optical line systems and optical transport devices. Performance monitoring (PM) parameters are used to gather, store, set thresholds for and report performance data for early detection of problems. Thresholds are used to set error levels for each PM parameter. During the accumulation cycle, if the current value of a performance monitoring parameter reaches or exceeds its corresponding threshold value, a threshold crossing alarm (TCA) is generated. The TCAs provide early detection of performance degradation. Glossary: OTS : Optical Transmission Section OTS-OCH : Optical Channel Information on OTS ATTN : Optical Attenuation GAIN : Optical Amplifier Gain TILT : Optical Amplifier TILT LBC : Laser Bias Current OSRI : Optical Safety Remote Interlock TX : Transmit RX : Receive VOA : Variable Optical Attenuator dB : Decibel dBm : Decibel-milliwatt mW : Milliwatt nm : Nanometer. | ||
| ciscoOpticalOtsMIBCompliance | 1.3.6.1.4.1.9.9.834.2.1.1 | The compliance statement for platforms that monitor the parameters for the optical interfaces. | ||
| ciscoOpticalOtsMIBCompliances | 1.3.6.1.4.1.9.9.834.2.1 | |||
| ciscoOpticalOtsMIBConformance | 1.3.6.1.4.1.9.9.834.2 | |||
| ciscoOpticalOtsMIBGroups | 1.3.6.1.4.1.9.9.834.2.2 | |||
| ciscoOpticalOtsMIBNotifs | 1.3.6.1.4.1.9.9.834.0 | |||
| ciscoOpticalOtsMIBObjects | 1.3.6.1.4.1.9.9.834.1 | |||
| I32 cooCurrentAmpliGainAvg | 1.3.6.1.4.1.9.9.834.1.2.2.1.14 | Integer32 | read-only | This object specifies the current average amplifier gain for the interface in 1/100 dB. |
| I32 cooCurrentAmpliGainMax | 1.3.6.1.4.1.9.9.834.1.2.2.1.13 | Integer32 | read-only | This object specifies the current maximum amplifier gain for the interface in 1/100 dB. |
| I32 cooCurrentAmpliGainMin | 1.3.6.1.4.1.9.9.834.1.2.2.1.12 | Integer32 | read-only | This object specifies the current minimum amplifier gain for the interface in 1/100 dB. |
| I32 cooCurrentAmpliGainTiltAvg | 1.3.6.1.4.1.9.9.834.1.2.2.1.17 | Integer32 | read-only | This object specifies the current average amplifier gain tilt for the interface in 1/100 dB. |
| I32 cooCurrentAmpliGainTiltMax | 1.3.6.1.4.1.9.9.834.1.2.2.1.16 | Integer32 | read-only | This object specifies the current maximum amplifier gain tilt for the interface in 1/100 dB. |
| I32 cooCurrentAmpliGainTiltMin | 1.3.6.1.4.1.9.9.834.1.2.2.1.15 | Integer32 | read-only | This object specifies the current minimum amplifier gain tilt for the interface in 1/100 dB. |
| NUM cooCurrentIntervalType | 1.3.6.1.4.1.9.9.834.1.2.2.1.1 | CoiIntervalType | not-accessible | This object represents the interval type during which the current performance statistics are accumulated. |
| U32 cooCurrentLBCAvg | 1.3.6.1.4.1.9.9.834.1.2.2.1.10 | Unsigned32 | read-only | This object specifies the current average Laser Bias Current in 1/10 percent for the interface. |
| U32 cooCurrentLBCMax | 1.3.6.1.4.1.9.9.834.1.2.2.1.4 | Unsigned32 | read-only | This object specifies the current maximum laser bias current in 1/10 percent for the interface. |
| U32 cooCurrentLBCMin | 1.3.6.1.4.1.9.9.834.1.2.2.1.7 | Unsigned32 | read-only | This object specifies the current minimum laser bias current in 1/10 percent for the interface. |
| COI cooCurrentRXPowerAvg | 1.3.6.1.4.1.9.9.834.1.2.2.1.9 | CoiOpticalPower | read-only | This object specifies the current average receive power for the interface in 1/100 dBm. |
| COI cooCurrentRXPowerMax | 1.3.6.1.4.1.9.9.834.1.2.2.1.3 | CoiOpticalPower | read-only | This object specifies the current maximum receive power for the interface in 1/100 dBm. |
| COI cooCurrentRXPowerMin | 1.3.6.1.4.1.9.9.834.1.2.2.1.6 | CoiOpticalPower | read-only | This object specifies the current minimum receive power for the interface in 1/100 dBm. |
| OCT cooCurrentTimestamp | 1.3.6.1.4.1.9.9.834.1.2.2.1.11 | OCTET STRING | read-only | This object specifies the timestamp for the current bucket for the interface. |
| COI cooCurrentTXPowerAvg | 1.3.6.1.4.1.9.9.834.1.2.2.1.8 | CoiOpticalPower | read-only | This object specifies the current average transmit power for the interface in 1/100 dBm. |
| COI cooCurrentTXPowerMax | 1.3.6.1.4.1.9.9.834.1.2.2.1.2 | CoiOpticalPower | read-only | This object specifies the current maximum transmit power for the interface in 1/100 dBm. |
| COI cooCurrentTXPowerMin | 1.3.6.1.4.1.9.9.834.1.2.2.1.5 | CoiOpticalPower | read-only | This object specifies the current minimum transmit power for the interface in 1/100 dBm. |
| I32 cooIntervalAmpliGainAvg | 1.3.6.1.4.1.9.9.834.1.2.3.1.15 | Integer32 | read-only | This object specifies the interval acerage amplifier gain in 1/100 dB for the interface. |
| I32 cooIntervalAmpliGainMax | 1.3.6.1.4.1.9.9.834.1.2.3.1.14 | Integer32 | read-only | This object specifies the interval maximum amplifier gain in 1/100 dB for the interface. |
| I32 cooIntervalAmpliGainMin | 1.3.6.1.4.1.9.9.834.1.2.3.1.13 | Integer32 | read-only | This object specifies the interval minimum amplifier gain in 1/100 dB for the interface. |
| I32 cooIntervalAmpliGainTiltAvg | 1.3.6.1.4.1.9.9.834.1.2.3.1.18 | Integer32 | read-only | This object specifies the interval average amplifier gain tilt in 1/100 dB for the interface. |
| I32 cooIntervalAmpliGainTiltMax | 1.3.6.1.4.1.9.9.834.1.2.3.1.17 | Integer32 | read-only | This object specifies the interval maximum amplifier gain tilt in 1/100 dB for the interface. |
| I32 cooIntervalAmpliGainTiltMin | 1.3.6.1.4.1.9.9.834.1.2.3.1.16 | Integer32 | read-only | This object specifies the interval minimum amplifier gain tilt in 1/100 dB for the interface. |
| U32 cooIntervalLBCAvg | 1.3.6.1.4.1.9.9.834.1.2.3.1.11 | Unsigned32 | read-only | This object specifies the interval average laser bias current in 1/10 percent for the interface. |
| U32 cooIntervalLBCMax | 1.3.6.1.4.1.9.9.834.1.2.3.1.5 | Unsigned32 | read-only | This object specifies the interval maximum laser bias current in 1/10 percent for the interface. |
| U32 cooIntervalLBCMin | 1.3.6.1.4.1.9.9.834.1.2.3.1.8 | Unsigned32 | read-only | This object specifies the interval minimum laser bias current in 1/10 percent for the interface. |
| U32 cooIntervalNum | 1.3.6.1.4.1.9.9.834.1.2.3.1.2 | Unsigned32 | not-accessible | This object identifies the interval for which the set of interval performance values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| COI cooIntervalRXPowerAvg | 1.3.6.1.4.1.9.9.834.1.2.3.1.10 | CoiOpticalPower | read-only | This object specifies the interval average receive power in 1/100 dBm for the interface. |
| COI cooIntervalRXPowerMax | 1.3.6.1.4.1.9.9.834.1.2.3.1.4 | CoiOpticalPower | read-only | This object specifies the interval maximum receive power in 1/100 dBm for the interface. |
| COI cooIntervalRXPowerMin | 1.3.6.1.4.1.9.9.834.1.2.3.1.7 | CoiOpticalPower | read-only | This object specifies the interval minimum receive power in 1/100 dBm for the interface. |
| OCT cooIntervalTimestamp | 1.3.6.1.4.1.9.9.834.1.2.3.1.12 | OCTET STRING | read-only | This object specifies the timestamp, for the bucket specified by 'cooIntervalNum', for the interface. |
| COI cooIntervalTXPowerAvg | 1.3.6.1.4.1.9.9.834.1.2.3.1.9 | CoiOpticalPower | read-only | This object specifies the interval average transmit power in 1/100 dBm for the interface. |
| COI cooIntervalTXPowerMax | 1.3.6.1.4.1.9.9.834.1.2.3.1.3 | CoiOpticalPower | read-only | This object specifies the interval maximum transmit power in 1/100 dBm for the interface. |
| COI cooIntervalTXPowerMin | 1.3.6.1.4.1.9.9.834.1.2.3.1.6 | CoiOpticalPower | read-only | This object specifies the interval minimum transmit power in 1/100 dBm for the interface. |
| NUM cooIntervalType | 1.3.6.1.4.1.9.9.834.1.2.3.1.1 | CoiIntervalType | not-accessible | This object represents the interval type during which the performance statistics are accumulated. |
| STR cooOtsAlarmAdditionalInfo | 1.3.6.1.4.1.9.9.834.1.5.5 | SnmpAdminString | accessible-for-notify | This object provides additional information about the alarm. This object would be an empty string if no additional information is specified. |
| STR cooOtsAlarmLocation | 1.3.6.1.4.1.9.9.834.1.5.1 | SnmpAdminString | accessible-for-notify | This object indicates the location of the component that raised alarm, within the device. |
| STR cooOtsAlarmName | 1.3.6.1.4.1.9.9.834.1.5.4 | SnmpAdminString | accessible-for-notify | This object represents the user-visible name, which uniquely identifies the alarm in the system. |
| COI cooOtsAlarmServiceAffecting | 1.3.6.1.4.1.9.9.834.1.5.8 | CoiOptAlarmServiceAffecting | accessible-for-notify | This object specifies the service affecting state of the alarm. |
| COI cooOtsAlarmSeverity | 1.3.6.1.4.1.9.9.834.1.5.6 | CoiOptAlarmSeverity | accessible-for-notify | This object specifies alarm severity. |
| COI cooOtsAlarmStatus | 1.3.6.1.4.1.9.9.834.1.5.7 | CoiOptAlarmStatus | accessible-for-notify | This object specifies alarm status. |
| TIM cooOtsAlarmTimeStamp | 1.3.6.1.4.1.9.9.834.1.5.3 | TimeStamp | accessible-for-notify | This object represents the time when an event occurred. This is accurate only upto a second. |
| COI cooOtsAlarmType | 1.3.6.1.4.1.9.9.834.1.5.2 | CoiOptAlarmType | accessible-for-notify | This object indicates the type of alarm that is raised. |
| cooOtsController | 1.3.6.1.4.1.9.9.834.1.1 | |||
| BIT cooOtsControllerAlarmState | 1.3.6.1.4.1.9.9.834.1.1.2.1.22 | Bits | read-only | This object indicates the current alarms status of the Optics layer. Alarms description : noDefect : No alarms highRXPwr : Input optical power reading over the fail-high threshold highTXPwr : Output optical power reading over the fail-high threshold lowRXPwr : Input optical power reading below the fail-low threshold lowTXPwr : Output optical power reading below the fail-low threshold lospRXPwr : Loss of optical power signal locRXPwr : Loss of optical continuity degLowGain : Amplifier gain degrade low degHighGain : Amplifier gain degrade high alsAmp : Amplifier automatic laser shutdown for safety reason aprAmp : Amplifier automatic power reduction noEqAutoAmp : Channels power not equalized for amplifier automatic control mode misAutoAmp : Misconfiguration for amplifier automatic control mode switchToProtect : Protected port switching to active role autoAmpliCtrlRunning : Amplifier automatic control mode algorithm running |
| COI cooOtsControllerAmpliChannelPwr | 1.3.6.1.4.1.9.9.834.1.1.2.1.13 | CoiOpticalPower | read-write | This object is used to configure the amplifier channel power in 1/100 dBm on optical OTS interfaces. |
| CIS cooOtsControllerAmpliControlMode | 1.3.6.1.4.1.9.9.834.1.1.2.1.15 | CiscoOpticalOtsAmpliControlMode | read-write | This object is used to configure the amplifier control mode. |
| CIS cooOtsControllerAmpliGain | 1.3.6.1.4.1.9.9.834.1.1.2.1.5 | CiscoOpticalOtsGainInDb | read-write | This object represents the amplifier gain value in 1/100 dB on optical OTS interfaces. |
| CIS cooOtsControllerAmpliGainRange | 1.3.6.1.4.1.9.9.834.1.1.2.1.16 | CiscoOpticalOtsAmpliGainRange | read-write | This object is used to configure the amplifier gain range. |
| CIS cooOtsControllerAmpliSafetyCtrlMode | 1.3.6.1.4.1.9.9.834.1.1.2.1.17 | CiscoOpticalOtsAmpliSafetyCtrlMode | read-write | This object is used to configure the safety control mode. |
| CIS cooOtsControllerAmpliTilt | 1.3.6.1.4.1.9.9.834.1.1.2.1.6 | CiscoOpticalOtsTiltInDb | read-write | This object represents the amplifier tilt value in 1/100 dB on optical OTS interfaces. |
| COI cooOtsControllerChannelPwrMaxDelta | 1.3.6.1.4.1.9.9.834.1.1.2.1.14 | CoiOpticalPower | read-write | This object is used to configure the maximum delta on channel power in 1/100 dBm on optical OTS interfaces. |
| cooOtsControllerEntry | 1.3.6.1.4.1.9.9.834.1.1.2.1 | not-accessible | An entry containing management information on OTS optical layer related attributes of interfaces with an ifType opticalTrasnport(196). Entries are created by the feature when a new interface is added to the ifTable. | |
| cooOtsControllerGroup | 1.3.6.1.4.1.9.9.834.2.2.3 | The collection of objects to allow configurations and give information related to the optical OTS characteristics for interfaces of ifType opticalChannel(196). | ||
| CIS cooOtsControllerLaserStatus | 1.3.6.1.4.1.9.9.834.1.1.2.1.2 | CiscoOpticalOtsLaserStatus | read-only | This object represents the current operational state of the laser. |
| CIS cooOtsControllerOsri | 1.3.6.1.4.1.9.9.834.1.1.2.1.18 | CiscoOpticalOtsOsri | read-write | This object is used to configure the OSRI. |
| CIS cooOtsControllerPortType | 1.3.6.1.4.1.9.9.834.1.1.2.1.1 | CiscoOpticalOtsPortType | read-only | This object represents the port type of the optical OTS interface. |
| CIS cooOtsControllerProtectionPortRole | 1.3.6.1.4.1.9.9.834.1.1.2.1.19 | CiscoOpticalOtsProtectionPortRole | read-only | This object represents the port role on optical channel interfaces. |
| T/F cooOtsControllerRXEnabled | 1.3.6.1.4.1.9.9.834.1.1.2.1.25 | TruthValue | read-write | This object represents the RX direction status of optical OTS interfaces. |
| COI cooOtsControllerRXLowThreshold | 1.3.6.1.4.1.9.9.834.1.1.2.1.11 | CoiOpticalPower | read-write | This object is used to configure the receive low threshold in 1/100 dBm on optical OTS interfaces. |
| COI cooOtsControllerRXPower | 1.3.6.1.4.1.9.9.834.1.1.2.1.3 | CoiOpticalPower | read-only | This object represents the receive power in 1/100 dBm on optical OTS interfaces. |
| COI cooOtsControllerRXSpanLoss | 1.3.6.1.4.1.9.9.834.1.1.2.1.23 | CoiOpticalPower | read-only | This object is used to represents the sapn loss power in 1/100 dBm on optical OTS interfaces |
| CIS cooOtsControllerRXVoaAttenuation | 1.3.6.1.4.1.9.9.834.1.1.2.1.9 | CiscoOpticalOtsVoaAttenInDb | read-write | This object represents the receive VOA attenuation value in 1/100 dBm on optical OTS interfaces. |
| CIS cooOtsControllerState | 1.3.6.1.4.1.9.9.834.1.1.2.1.20 | CiscoOpticalOtsState | read-only | This object represents the controller status of optical OTS interfaces. |
| cooOtsControllerTable | 1.3.6.1.4.1.9.9.834.1.1.2 | not-accessible | This table provides management information for OTS optical layer related attributes of interfaces with an ifType of opticalTransport(196). | |
| COI cooOtsControllerTotalRXPower | 1.3.6.1.4.1.9.9.834.1.1.2.1.7 | CoiOpticalPower | read-only | This object is used to represents the total receive power in 1/100 dBm on optical OTS interfaces. |
| COI cooOtsControllerTotalTXPower | 1.3.6.1.4.1.9.9.834.1.1.2.1.8 | CoiOpticalPower | read-only | This object is used to represents the total transmit power in 1/100 dBm on optical OTS interfaces. |
| CIS cooOtsControllerTranspAdminState | 1.3.6.1.4.1.9.9.834.1.1.2.1.21 | CiscoOpticalOtsTranspAdminState | read-only | This object represents the transport administration status on optical OTS interfaces. |
| T/F cooOtsControllerTXEnabled | 1.3.6.1.4.1.9.9.834.1.1.2.1.26 | TruthValue | read-write | This object represents the TX direction status of optical OTS interfaces. |
| COI cooOtsControllerTXLowThreshold | 1.3.6.1.4.1.9.9.834.1.1.2.1.12 | CoiOpticalPower | read-write | This object is used to configure the transmit low threshold in 1/100 dBm on optical OTS interfaces. |
| COI cooOtsControllerTXPower | 1.3.6.1.4.1.9.9.834.1.1.2.1.4 | CoiOpticalPower | read-only | This object represents the transmit power in 1/100 dBm on optical OTS interfaces. |
| COI cooOtsControllerTXSpanLoss | 1.3.6.1.4.1.9.9.834.1.1.2.1.24 | CoiOpticalPower | read-only | This object is used to represents the sapn loss power in 1/100 dBm on optical OTS interfaces |
| CIS cooOtsControllerTXVoaAttenuation | 1.3.6.1.4.1.9.9.834.1.1.2.1.10 | CiscoOpticalOtsVoaAttenInDb | read-write | This object represents the transmit VOA attenuation value in 1/100 dBm on optical OTS interfaces. |
| cooOtsCurrentEntry | 1.3.6.1.4.1.9.9.834.1.2.2.1 | not-accessible | An entry containing current information on optical layer related attributes of interfaces with an ifType opticalChannel(196). Entries are created by the feature when a new interface is added to the ifTable. | |
| cooOtsCurrentGroup | 1.3.6.1.4.1.9.9.834.2.2.6 | The collection of objects used for monitoring the current information for optical layer related attributes of interfaces with an ifType of opticalChannel(196) in a current interval. | ||
| cooOtsCurrentTable | 1.3.6.1.4.1.9.9.834.1.2.2 | not-accessible | This table provides current information for optical layer related attributes of interfaces with an ifType of opticalChannel(196), lane as cooCurrentLane and interval as cooCurrentIntervalType. | |
| NTF cooOtsEquipmentAlarm | 1.3.6.1.4.1.9.9.834.0.3 | This notification is generated whenever the optical equipment alarm is generated. | ||
| cooOtsEquipmentAlarmGroup | 1.3.6.1.4.1.9.9.834.1.5 | |||
| cooOtsEquipmentAlarmInfoGroup | 1.3.6.1.4.1.9.9.834.2.2.11 | The optical equipment notifications whenever the alarm is generated. | ||
| cooOtsGroup | 1.3.6.1.4.1.9.9.834.2.2.1 | The collection of objects to provide information related to the optical OTS characteristics for interfaces of ifType opticalChannel(196). | ||
| cooOtsIntervalEntry | 1.3.6.1.4.1.9.9.834.1.2.3.1 | not-accessible | An entry containing interval information on optical layer related attributes of interfaces with an ifType opticalChannel(196). Entries are created by the feature when a new interface is added to the ifTable. | |
| cooOtsIntervalGroup | 1.3.6.1.4.1.9.9.834.2.2.7 | The collection of objects used for monitoring the interval information for optical layer related attributes of interfaces with an ifType of opticalChannel(196) in a given interval. | ||
| cooOtsIntervalTable | 1.3.6.1.4.1.9.9.834.1.2.3 | not-accessible | This table provides interval information for optical layer related attributes of interfaces with an ifType of opticalChannel(196), lane as cooIntervalLane, Interval as cooIntervalIntervalType and history bucket as cooIntervalIntervalType. | |
| T/F cooOtsNotifEnabled | 1.3.6.1.4.1.9.9.834.1.1.1 | TruthValue | read-write | This object controls the generation of cooOtsStatusChange notification. If the value of this object is 'true', then the generation of cooOtsStatusChange notification is enabled. If the value of this object is 'false', then the generation of cooOtsStatusChange notification is disabled. |
| cooOtsNotifEnableGroup | 1.3.6.1.4.1.9.9.834.2.2.8 | The collection of objects to enable the notification generations upon an interface's alarms status change on optics OTS layer. | ||
| cooOtsNotifGroup | 1.3.6.1.4.1.9.9.834.2.2.9 | The optical status change notifications whenever the alarms status of optical OTS layer on an interface changes. | ||
| BIT cooOtsOchControllerAlarmState | 1.3.6.1.4.1.9.9.834.1.1.3.1.12 | Bits | read-only | This object indicates the current alarms status of the Optics layer. Alarms description : noDefect : No alarms highRXPwr : Input optical power reading over the fail-high threshold highTXPwr : Output optical power reading over the fail-high threshold lowRXPwr : Input optical power reading below the fail-low threshold lowTXPwr : Output optical power reading below the fail-low threshold lospRXPwr : Loss of optical power signal locRXPwr : Loss of optical continuity degLowGain : Amplifier gain degrade low degHighGain : Amplifier gain degrade high alsAmp : Amplifier automatic laser shutdown for safety reason aprAmp : Amplifier automatic power reduction noEqAutoAmp : Channels power not equalized for amplifier automatic control mode misAutoAmp : Misconfiguration for amplifier automatic control mode switchToProtect : Protected port switching to active role |
| U32 cooOtsOchControllerChannelNumber | 1.3.6.1.4.1.9.9.834.1.1.3.1.9 | Unsigned32 | read-only | This object represents the channel number on optical OTS-OCH interfaces. |
| cooOtsOchControllerEntry | 1.3.6.1.4.1.9.9.834.1.1.3.1 | not-accessible | An entry containing management information on OTS-OCH optical layer related attributes of interfaces with an ifType opticalTransport(196). Entries are created by the feature when a new interface is added to the ifTable. | |
| U32 cooOtsOchControllerFrequency | 1.3.6.1.4.1.9.9.834.1.1.3.1.8 | Unsigned32 | read-only | This object represents the frequency on optical Ots-Och channel interfaces (unit 100 MHz). |
| cooOtsOchControllerGroup | 1.3.6.1.4.1.9.9.834.2.2.4 | The collection of objects to allow configurations and give information related to the optical OTS-OCH characteristics for interfaces of ifType opticalChannel(196). | ||
| CIS cooOtsOchControllerLaserStatus | 1.3.6.1.4.1.9.9.834.1.1.3.1.2 | CiscoOpticalOtsLaserStatus | read-only | This object represents the current operational state of the laser. |
| CIS cooOtsOchControllerPortType | 1.3.6.1.4.1.9.9.834.1.1.3.1.1 | CiscoOpticalOtsPortType | read-only | This object represents the port type of the optical OTS-OCH interface. |
| COI cooOtsOchControllerRXLowThreshold | 1.3.6.1.4.1.9.9.834.1.1.3.1.5 | CoiOpticalPower | read-write | This object is used to configure the receive low threshold in 1/100 dBm on optical OTS-OCH interfaces. |
| COI cooOtsOchControllerRXPower | 1.3.6.1.4.1.9.9.834.1.1.3.1.3 | CoiOpticalPower | read-only | This object represents the receive power in 1/100 dBm on optical OTS-OCH interfaces. |
| CIS cooOtsOchControllerState | 1.3.6.1.4.1.9.9.834.1.1.3.1.10 | CiscoOpticalOtsState | read-only | This object represents the controller status of optical OTS-OCH interfaces. |
| cooOtsOchControllerTable | 1.3.6.1.4.1.9.9.834.1.1.3 | not-accessible | This table provides management information for OTS-OCH optical layer related attributes of interfaces with an ifType of opticalTransport(196). | |
| CIS cooOtsOchControllerTranspAdminState | 1.3.6.1.4.1.9.9.834.1.1.3.1.11 | CiscoOpticalOtsTranspAdminState | read-only | This object represents the transport administration status on optical OTS-OCH interfaces. |
| COI cooOtsOchControllerTXLowThreshold | 1.3.6.1.4.1.9.9.834.1.1.3.1.6 | CoiOpticalPower | read-write | This object is used to configure the transmit low threshold in 1/100 dBm on optical OTS-OCH interfaces. |
| COI cooOtsOchControllerTXPower | 1.3.6.1.4.1.9.9.834.1.1.3.1.4 | CoiOpticalPower | read-only | This object represents the transmit power in 1/100 dBm on optical OTS-OCH interfaces. |
| COI cooOtsOchControllerWavelength | 1.3.6.1.4.1.9.9.834.1.1.3.1.7 | CoiOpticalWavelength | read-only | This object represents the wavelength on optical OTS-OCH interfaces (unit 1/100 nm). |
| U32 cooOtsOchControllerWidth | 1.3.6.1.4.1.9.9.834.1.1.3.1.13 | Unsigned32 | read-only | This object represents the frequency on optical Ots-Och channel interfaces (unit 1/10 GHz). |
| cooOtsOchGroup | 1.3.6.1.4.1.9.9.834.2.2.2 | The collection of objects to give information related to the optical OTS-OCH characteristics for interfaces of ifType opticalChannel(196). | ||
| T/F cooOtsOchNotifEnabled | 1.3.6.1.4.1.9.9.834.1.1.4 | TruthValue | read-write | This object controls the generation of cooOtsOchStatusChange notification. If the value of this object is 'true', then the generation of cooOtsOchStatusChange notification is enabled. If the value of this object is 'false', then the generation of cooOtsOchStatusChange notification is disabled. |
| cooOtsOchNotifEnableGroup | 1.3.6.1.4.1.9.9.834.2.2.13 | The collection of objects to enable the notification generations upon an interface's alarms status change on optics OTS-OCH layer. | ||
| cooOtsOchNotifGroup | 1.3.6.1.4.1.9.9.834.2.2.10 | The optical status change notifications whenever the alarms status of optical OTS-OCH layer on an interface changes. | ||
| NTF cooOtsOchStatusChange | 1.3.6.1.4.1.9.9.834.0.2 | This notification is generated when the value of cooOtsOchControllerStatus changes. The varbind for this notification indicates the ifindex, ifname of the OTS-OCH interface as well as controller port type and status. | ||
| cooOtsPerformanceMonitoring | 1.3.6.1.4.1.9.9.834.1.2 | |||
| cooOtsPowerGroup | 1.3.6.1.4.1.9.9.834.2.2.12 | The collection of objects used for monitoring the total power information for optical layer related attributes of interfaces with an ifType of opticalChannel(196). | ||
| NTF cooOtsStatusChange | 1.3.6.1.4.1.9.9.834.0.1 | This notification is generated when the value of cooOtsControllerStatus changes. The varbind for this notification indicates the ifindex, ifname of the OTS interface as well as controller port type and status. | ||
| cooOtsThresholdEntry | 1.3.6.1.4.1.9.9.834.1.2.1.1 | not-accessible | An entry containing threshold information on optical layer related attributes of interfaces with an ifType opticalTransport(196). Entries are created by the feature when a new interface is added to the ifTable. | |
| cooOtsThresholdGroup | 1.3.6.1.4.1.9.9.834.2.2.5 | The collection of objects used for monitoring the threshold information for optical layer related attributes of interfaces with an ifType of opticalChannel(196). | ||
| cooOtsThresholdTable | 1.3.6.1.4.1.9.9.834.1.2.1 | not-accessible | This table provides threshold information for optical layer related attributes of interfaces with an ifType of opticalTransport(196) and interval type as cooThreshIntervalType. | |
| T/F cooThreshAmpliGainEnableMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.16 | TruthValue | read-write | This object is used to configure the enablement of the threshold maximum ampli gain for the interface. |
| T/F cooThreshAmpliGainEnableMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.17 | TruthValue | read-write | This object is used to configure the enablement of the threshold minimum ampli gain for the interface. |
| I32 cooThreshAmpliGainMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.15 | Integer32 | read-write | This object is used to configure the threshold of maximum ampli gain for the interface in 1/100 dB. |
| I32 cooThreshAmpliGainMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.14 | Integer32 | read-write | This object is used to configure the threshold of minimum ampli gain for the interface in 1/100 dB. |
| T/F cooThreshAmpliGainTiltEnableMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.20 | TruthValue | read-write | This object is used to configure the enablement of the threshold maximum ampli gain tilt for the interface. |
| T/F cooThreshAmpliGainTiltEnableMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.21 | TruthValue | read-write | This object is used to configure the enablement of the threshold minimum ampli gain tilt for the interface. |
| I32 cooThreshAmpliGainTiltMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.19 | Integer32 | read-write | This object is used to configure the threshold of maximum ampli gain tilt for the interface in 1/100 dB. |
| I32 cooThreshAmpliGainTiltMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.18 | Integer32 | read-write | This object is used to configure the threshold of minimum ampli gain tilt for the interface in 1/100 dB. |
| NUM cooThreshIntervalType | 1.3.6.1.4.1.9.9.834.1.2.1.1.1 | CoiIntervalType | not-accessible | This object represents the interval type during which the performance statistics are accumulated for the interface. |
| T/F cooThreshLBCEnableMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.13 | TruthValue | read-write | This object is used to configure the enablement of the threshold maximum laser bias current for the interface. |
| T/F cooThreshLBCEnableMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.10 | TruthValue | read-write | This object is used to configure the enablement of the threshold minimum laser bias current for the interface. |
| U32 cooThreshLBCMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.7 | Unsigned32 | read-only | This object is used to configure the threshold of maximum Laser Bias Current in 1/10 percent for the interface. |
| U32 cooThreshLBCMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.4 | Unsigned32 | read-only | This object is used to configure the threshold of minimum laser bias current in 1/10 percent. |
| T/F cooThreshRXPowerEnableMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.12 | TruthValue | read-write | This object is used to configure the enablement of the threshold maximum receive power for the interface. |
| T/F cooThreshRXPowerEnableMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.9 | TruthValue | read-write | This object is used to configure the enablement of the threshold minimum receive power for the interface. |
| COI cooThreshRXPowerMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.6 | CoiOpticalPower | read-write | This object is used to configure the threshold of maximum receive power for the interface in 1/100 dBm. |
| COI cooThreshRXPowerMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.3 | CoiOpticalPower | read-write | This object is used to configure the threshold of minimum receive power for the interface in 1/100 dBm. |
| T/F cooThreshTXPowerEnableMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.11 | TruthValue | read-write | This object is used to configure the enablement of the threshold maximum transmit power for the interface. |
| T/F cooThreshTXPowerEnableMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.8 | TruthValue | read-write | This object is used to configure the enablement of threshold minimum transmit power for the interface. |
| COI cooThreshTXPowerMax | 1.3.6.1.4.1.9.9.834.1.2.1.1.5 | CoiOpticalPower | read-write | This object is used to configure the threshold of maximum Transmit power for the interface in 1/100 dBm. |
| COI cooThreshTXPowerMin | 1.3.6.1.4.1.9.9.834.1.2.1.1.2 | CoiOpticalPower | read-write | This object is used to configure the threshold of minimum transmit power for the interface in 1/100 dBm. |
RFC description
Cisco optical transmission section interface management with performance monitoring and threshold crossing alarms.
Start monitoring Cisco DWDM optical transport/line system (ONS/NCS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.