CISCO-TELEPRESENCE-CALL-MIB

All MIBs › CISCO-TELEPRESENCE-CALL-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2014-07-24

Category: Cisco Devices, Telephony and VoIP

Description: Monitors active and historical TelePresence video call sessions, media quality, and codec statistics on Cisco endpoints.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-TELEPRESENCE-CALL-MIB?

This Cisco MIB defines managed objects for monitoring TelePresence audio-video (and sometimes audio-only add-in) calls on Cisco TelePresence endpoints and systems. It exposes call/session state data, registered local directory numbers, notification-enable flags, and information about which management system currently controls the endpoint. Its monitoring emphasis is on software/service status - call and registration state, active management-system connectivity, and endpoint operating mode - functioning as a service-health indicator for the TelePresence call-control relationship rather than reporting hardware temperature or power supply status. It implicitly depends on a call-management system (such as Cisco Unified Communications Manager or Cisco TelePresence Management Suite) since endpoints register their directory numbers and mode with an external management system tracked here. Typical deployment is on Cisco TelePresence room systems and endpoints managed through a centralized call/conference management platform. Engineers can download the CISCO-TELEPRESENCE-CALL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-TELEPRESENCE-CALL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco TelePresence room systems and endpoints

Monitoring Examples

ctpcLocalDirNumTable/ctpcLocalDirNumEntry, indexed by ctpcLocalDirNumIndex, exposes each registered ctpcLocalDirNum on the endpoint, while ctpcMgmtSysTable together with ctpcActiveMgmtSysIndex identifies which management system is currently controlling the endpoint and ctpcMode reports its current operating mode. An admin polling ctpcActiveMgmtSysIndex who sees it flip unexpectedly, or ctpcMgmtSysConnNotifyEnable-triggered notifications firing repeatedly, would suspect a failover or lost registration between primary and backup call-management systems.

What Can Be Monitored

active TelePresence call/session state
registered local directory numbers
active call-management system
endpoint operating mode
management-system connection notifications

Imported Objects

From CISCO-QOS-PIB-MIB

QosLayer2Cos

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From CISCO-TC

Unsigned64

From DIFFSERV-DSCP-TC

Dscp

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue
VariablePointer

How to Use in IPNetwork Monitor

Example using ctpcTxTotalBytes OID:

Select a Cisco TelePresence room system or endpoint as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ctpcTxTotalBytes into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object specifies the total number of bytes transmitted from a stream source. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in bytes), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoTelepresenceCallMIB	1.3.6.1.4.1.9.9.644			The MIB module defines the managed objects for Telepresence calls. Telepresence refers to a set of technologies which allow a person to feel as if they were present, to give the appearance that they were present, or to have an effect, at a location other than their true location. Telepresence call is an audio-video call; however, some Telepresence systems also support audio addin call. Different security levels are supported in some Telepresence systems; security level may be specified from call management system. Some Telepresence systems support Telepresence meeting, the agent of the corresponding systems may also support CISCO-TELEPRESENCE-MEETING-MIB.
ciscoTelepresenceCallMIBConform	1.3.6.1.4.1.9.9.644.2
ciscoTelepresenceCallMIBNotifs	1.3.6.1.4.1.9.9.644.0
ciscoTelepresenceCallMIBObjects	1.3.6.1.4.1.9.9.644.1
ciscoTpCallConfigurationGroup	1.3.6.1.4.1.9.9.644.2.2.1			A collection of objects providing the call event monitoring and notification configuration.
ciscoTpCallEventHistoryGroup	1.3.6.1.4.1.9.9.644.2.2.4			A collection of objects providing Telepresence call monitoring crossed event information.
ciscoTpCallInformationGroup	1.3.6.1.4.1.9.9.644.2.2.2			A collection of objects providing call management system information as well as system caller ID information.
ciscoTpCallInformationGroupSup1	1.3.6.1.4.1.9.9.644.2.2.7			A supplemental group of ciscoTpCallInformationGroup.
ciscoTpCallInformationGroupSup2	1.3.6.1.4.1.9.9.644.2.2.12			A supplemental group of ciscoTpCallInformationGroup.
ciscoTpCallMgmtSysConnEventHistGroup	1.3.6.1.4.1.9.9.644.2.2.6			A collection of objects providing call management system connection changes event information.
ciscoTpCallMIBCompliance	1.3.6.1.4.1.9.9.644.2.1.1			The compliance statement for entities which implement the Cisco Telepresence Call MIB.
ciscoTpCallMIBComplianceRev1	1.3.6.1.4.1.9.9.644.2.1.2			The compliance statement for entities which implement the Cisco Telepresence Call MIB.
ciscoTpCallMIBComplianceRev2	1.3.6.1.4.1.9.9.644.2.1.3			The compliance statement for entities which implement the Cisco Telepresence Call MIB.
ciscoTpCallMIBComplianceRev3	1.3.6.1.4.1.9.9.644.2.1.4			The compliance statement for entities which implement the Cisco Telepresence Call MIB.
ciscoTpCallMIBComplianceRev4	1.3.6.1.4.1.9.9.644.2.1.5			The compliance statement for entities which implement the Cisco Telepresence Call MIB.
ciscoTpCallMIBComplianceRev5	1.3.6.1.4.1.9.9.644.2.1.6			The compliance statement for entities which implement the Cisco Telepresence Call MIB.
ciscoTpCallMIBCompliances	1.3.6.1.4.1.9.9.644.2.1
ciscoTpCallMIBGroups	1.3.6.1.4.1.9.9.644.2.2
ciscoTpCallNotificationGroup	1.3.6.1.4.1.9.9.644.2.2.5			A collection of event notifications. This ciscoTpCallNotificationGroup object is not used any more.
ciscoTpCallNotificationGroupRev1	1.3.6.1.4.1.9.9.644.2.2.9			A collection of event notifications.
ciscoTpCallStatisticsGroup	1.3.6.1.4.1.9.9.644.2.2.3			A collection of objects providing Telepresence call's statistical information.
ciscoTpCallStatisticsGroupSup1	1.3.6.1.4.1.9.9.644.2.2.8			A supplemental group of ciscoTpCallStatisticsGroup.
ciscoTpCallStatisticsGroupSup2	1.3.6.1.4.1.9.9.644.2.2.10			A supplemental group of ciscoTpCallStatisticsGroup.
ciscoTpCallStatisticsGroupSup3	1.3.6.1.4.1.9.9.644.2.2.11			A supplemental group of ciscoTpCallStatisticsGroup.
U32 ctpcActiveMgmtSysIndex	1.3.6.1.4.1.9.9.644.1.2.5	Unsigned32	read-only	This object specifies the value of ctpcMgmtSysIndex which the Telepresence system currently connects. If the system is in 'nonMgmtSys' mode, this object will have value '0'
CTP ctpcAttributes	1.3.6.1.4.1.9.9.644.1.4.8.1.15	CtpcAttributes	read-only	This object specifies the connection mode of a call.
UNS ctpcAvgCallJitter	1.3.6.1.4.1.9.9.644.1.4.10.1.23	Unsigned64	read-only	This object specifies the average jitter of a stream source for a Telepresence call among all the sample periods specified in ctpcSamplePeriod.
G32 ctpcAvgCallLatency	1.3.6.1.4.1.9.9.644.1.4.9.1.3	Gauge32	read-only	This object specifies the average latency for the duration of a call.
UNS ctpcAvgPeriodJitter	1.3.6.1.4.1.9.9.644.1.4.10.1.22	Unsigned64	read-only	This object specifies the average jitter of a stream source for a Telepresence call from the most recent sample period specified in ctpcSamplePeriod. When a call is terminated, the value will be reset to '0'.
G32 ctpcAvgPeriodLatency	1.3.6.1.4.1.9.9.644.1.4.9.1.2	Gauge32	read-only	This object specifies the average latency for the last sample period specified in ctpcSamplePeriod. When a call is terminated, the value will be reset to '0'.
CTP ctpcCallTermReason	1.3.6.1.4.1.9.9.644.1.4.8.1.17	CtpcCallTerminationCode	read-only	This object specifies the call termination reason.
INT ctpcDirection	1.3.6.1.4.1.9.9.644.1.4.8.1.10	INTEGER	read-only	This object specifies the call direction. incoming (1) -- The system received a call. outgoing (2) -- The system initiated a call. unknown (3) -- The system cannot detect the direction -- of a call.
U32 ctpcDuration	1.3.6.1.4.1.9.9.644.1.4.8.1.7	Unsigned32	read-only	This object specifies the elapsed time since the call established.
ctpcEntry	1.3.6.1.4.1.9.9.644.1.4.8.1		not-accessible	An entry contains information of a Telepresence supported call. Some Telepresence systems support both audio-video call and audio-addin call. A management station wishing to create a call should create the associated instance of the row status and the remote directory number objects. ctpcIndex should be set to the next-to-be-assigned number of ctpcTableLastIndex. An instance of ctpcRemoteDirNum is required to create a call. Once the appropriate instance of all the configuration objects have been created, the row status should be set to active to initiate the request. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo. Once a call entry has been activated, it cannot be stopped. Instance of ctpcState on the created row reports the latest status of the newly created call. If a Telepresence system receives a call, a unique index will be chosen and an entry will be created by the agent, ctpcRowStatus will be set to active, and ctpcRemoteDirNum will be filled by agent if it is known.
STR ctpcExtNumberMask	1.3.6.1.4.1.9.9.644.1.2.3.1.3	SnmpAdminString	read-only	This object indicates the external number mask that configured in the management system. For example, if ctpcExtNumberMask is configured as 9728XXXXX, and ctpcLocalDirNum is configured as 12345, the external caller shall see the Directory Number (DN) as 972812345
U32 ctpcIndex	1.3.6.1.4.1.9.9.644.1.4.8.1.1	Unsigned32	not-accessible	This object specifies a unique identification of a call entry. If the chosen ctpcIndex value for the row creation is already in use by an existing entry, SNMP SetRequest to the ctpcIndex value will fail.
ctpcInfoObjects	1.3.6.1.4.1.9.9.644.1.2
U32 ctpcInitialBitRate	1.3.6.1.4.1.9.9.644.1.4.8.1.12	Unsigned32	read-create	This object specifies the initial bit rate of a Telepresence call.
U32 ctpcLatestBitRate	1.3.6.1.4.1.9.9.644.1.4.8.1.13	Unsigned32	read-only	This object specifies the current bit rate of a call. Telepresence call's bit rate may be lowered automatically due to network congestion.
IP ctpcLocalAddr	1.3.6.1.4.1.9.9.644.1.2.2	InetAddress	read-only	This object specifies the address of the system in the format given by the corresponding instance of ctpcLocalAddrType.
IPt ctpcLocalAddrType	1.3.6.1.4.1.9.9.644.1.2.1	InetAddressType	read-only	This object specifies the type of address contained in the corresponding instance of ctpcLocalAddr.
ADR ctpcLocalDirNum	1.3.6.1.4.1.9.9.644.1.2.3.1.2	CtpcE164Address	read-only	This object specifies the directory number of the Telepresence system.
ctpcLocalDirNumEntry	1.3.6.1.4.1.9.9.644.1.2.3.1		not-accessible	An entry containing information about one E.164 number.
U32 ctpcLocalDirNumIndex	1.3.6.1.4.1.9.9.644.1.2.3.1.1	Unsigned32	not-accessible	The object specifies a unique index for a local directory number entry associates to the system.
ctpcLocalDirNumTable	1.3.6.1.4.1.9.9.644.1.2.3		not-accessible	A table of information about E.164 numbers assigned to the Telepresence system. The directory numbers usually are specified by the call management system. Some Telepresence systems have only one E.164 number assigned.
STR ctpcLocalSIPCallId	1.3.6.1.4.1.9.9.644.1.4.8.1.3	SnmpAdminString	read-only	This object specifies the local SIP call ID.
UNS ctpcMaxCallJitter	1.3.6.1.4.1.9.9.644.1.4.10.1.25	Unsigned64	read-only	This object specifies the maximum average jitter of a stream source for a Telepresence call among all the sample periods specified in ctpcSamplePeriod.
U32 ctpcMaxCallJitterRecTime	1.3.6.1.4.1.9.9.644.1.4.10.1.26	Unsigned32	read-only	This object specifies the elapsed time since the call is established when the maximum jitter of a stream source is recorded.
G32 ctpcMaxCallLatency	1.3.6.1.4.1.9.9.644.1.4.9.1.5	Gauge32	read-only	This object specifies the maximum latency for the duration of a call.
U32 ctpcMaxCallLatencyRecTime	1.3.6.1.4.1.9.9.644.1.4.9.1.6	Unsigned32	read-only	This object specifies the elapsed time since the call is established when the maximum latency of a call is recorded.
UNS ctpcMaxPeriodJitter	1.3.6.1.4.1.9.9.644.1.4.10.1.24	Unsigned64	read-only	This object specifies the maximum jitter of a stream source for a Telepresence call for any sample period specified in ctpcSamplePeriod. When a call is terminated, the value will be reset to '0'.
G32 ctpcMaxPeriodLatency	1.3.6.1.4.1.9.9.644.1.4.9.1.4	Gauge32	read-only	This object specifies the maximum latency among all the sample periods.
U32 ctpcMediaDestPort	1.3.6.1.4.1.9.9.644.1.4.9.1.8	Unsigned32	read-only	This object specifies the dest port to transmit and receive the media.
U32 ctpcMediaSrcPort	1.3.6.1.4.1.9.9.644.1.4.9.1.7	Unsigned32	read-only	This object specifies the source port to transmit and receive the media.
IP ctpcMgmtSysAddr	1.3.6.1.4.1.9.9.644.1.2.6.1.3	InetAddress	read-only	This object specifies a call management system address which a Telepresence system can connect to if it is in 'mgmtSys' mode. It is in the format given by the corresponding instance of ctpcMgmtSysAddrType.
IPt ctpcMgmtSysAddrType	1.3.6.1.4.1.9.9.644.1.2.6.1.2	InetAddressType	read-only	This object specifies the type of address contained in the corresponding instance of ctpcMgmtSysAddr.
U32 ctpcMgmtSysConnEventHistLastIndex	1.3.6.1.4.1.9.9.644.1.6.2	Unsigned32	read-only	This object specifies the value of the ctpcMgmtSysConnEventHistIndex object corresponding to the last entry added to the table by the agent. If the management client uses the notifications defined by this module, then it can poll this object to determine whether it has missed a notification sent by the agent.
ctpcMgmtSysConnEventHistory	1.3.6.1.4.1.9.9.644.1.6
ctpcMgmtSysConnEventHistoryEntry	1.3.6.1.4.1.9.9.644.1.6.3.1		not-accessible	An entry contains information about a call management system connection state change event.
U32 ctpcMgmtSysConnEventHistoryIndex	1.3.6.1.4.1.9.9.644.1.6.3.1.1	Unsigned32	not-accessible	A unique non-zero integer value that identifies a row in this table. The value of this table starts from '1' and monotonically increases for each management system connection event received by the agent. If the value of this object is '4294967295', the agent will reset it to '1' upon receiving the next event.
ctpcMgmtSysConnEventHistoryTable	1.3.6.1.4.1.9.9.644.1.6.3		not-accessible	This table contains a history of call management system connection state changes. After management system initialization (i.e. when sysUpTime is reset to zero), this table records all notifications until it reaches its capacity specified in ctpcMgmtSysConnEventHistTableSize. Thereafter, it remains full by retaining the most recent notifications.
U32 ctpcMgmtSysConnEventHistTableSize	1.3.6.1.4.1.9.9.644.1.6.1	Unsigned32	read-write	This object specifies the number of entries that the ctpcMgmtSysConnEventHistoryTable can contain. When the capacity of the ctpcMgmtSysConnEventHistoryTable has reached, the value specified by this object, then the agent deletes the oldest entry in order to accommodate the new entry. A value of '0' prevents any history from being retained. Some agents restrict the maximum value of this object to be less than 500.
NTF ctpcMgmtSysConnEventNotification	1.3.6.1.4.1.9.9.644.0.3			This notification is sent when a call management system connection state change occurs.
U32 ctpcMgmtSysConnEventSIPRespCode	1.3.6.1.4.1.9.9.644.1.6.3.1.3	Unsigned32	read-only	This object specifies SIP response code from call management system when the event happened.
CTP ctpcMgmtSysConnEventStatus	1.3.6.1.4.1.9.9.644.1.6.3.1.2	CtpcMgmtSysConnStatusCode	read-only	This object specifies a call management system connection state when the event happened.
TIK ctpcMgmtSysConnEventTimeStamp	1.3.6.1.4.1.9.9.644.1.6.3.1.4	TimeTicks	read-only	This object specifies the value of the sysUpTime object at the time the notification was generated.
NTF ctpcMgmtSysConnFailNotification	1.3.6.1.4.1.9.9.644.0.1			This notification is sent when a call management system connection failure occurs. This notification is deprecated in favor of ctpcMgmtSysConnEventNotification. ctpcMgmtSysConnFailNotification object is superseded by ctpcMgmtSysConnEventNotification.
T/F ctpcMgmtSysConnNotifyEnable	1.3.6.1.4.1.9.9.644.1.1.2	TruthValue	read-write	This object controls generation of notifications for call management system connection state changes. When the object is 'true', the agent will generate notification when call management system connection state changes. When the object is 'false', the agent will not generate notification when call management system connection state changes.
CTP ctpcMgmtSysConnStatus	1.3.6.1.4.1.9.9.644.1.2.6.1.4	CtpcMgmtSysConnStatusCode	read-only	This object specifies the last connection state between the Telepresence and a call management system.
ctpcMgmtSysEntry	1.3.6.1.4.1.9.9.644.1.2.6.1		not-accessible	An entry contains information about a call management system.
U32 ctpcMgmtSysIndex	1.3.6.1.4.1.9.9.644.1.2.6.1.1	Unsigned32	not-accessible	This object specifies a unique index for a call management system entry.
U32 ctpcMgmtSysSIPRespCode	1.3.6.1.4.1.9.9.644.1.2.6.1.5	Unsigned32	read-only	This object specifies the last SIP response code from call management system.
ctpcMgmtSysTable	1.3.6.1.4.1.9.9.644.1.2.6		not-accessible	A table of configured call management systems.
INT ctpcMode	1.3.6.1.4.1.9.9.644.1.2.4	INTEGER	read-only	This object specifies the system configured call mode. It indicates if the call is processed by call management system or not. nonMgmtSys(1) -- Telepresence system that does not connect to any call management system such as Cisco Unified Communication Manager (CUCM). mgmtSys (2) -- Telepresence system that connects to a call management system. Note that some Telepresence systems support 'mgmtSys' only.
ctpcObjects	1.3.6.1.4.1.9.9.644.1.1
CTP ctpcRemoteDevice	1.3.6.1.4.1.9.9.644.1.4.8.1.16	CtpcRemoteDeviceType	read-only	This object specifies the remote device type.
ADR ctpcRemoteDirNum	1.3.6.1.4.1.9.9.644.1.4.8.1.2	CtpcE164Address	read-create	This object specifies the remote directory number of a call. Once the ctpcRowStatus is set to 'active', the ctpcRemoteDirNum cannot be changed.
ROW ctpcRowStatus	1.3.6.1.4.1.9.9.644.1.4.8.1.14	RowStatus	read-create	This object specifies the entry status of ctpcEntry. Once ctpcRowStatus is set to 'active', the call creation cannot be stopped. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences of call termination and/or losing the call statistics information. Thus, write access to this object is inappropriate for most of the Telepresence systems, and many implementations will choose not to support write-access for this object.
T/F ctpcRxActive	1.3.6.1.4.1.9.9.644.1.4.10.1.10	TruthValue	read-only	This object is set to 'true' if data received by a stream source is 'active'.
C64 ctpcRxCallAuthFailure	1.3.6.1.4.1.9.9.644.1.4.10.1.21	Counter64	read-only	This object specifies the number of authenticated packets for which verification failed.
G32 ctpcRxCallBitRate	1.3.6.1.4.1.9.9.644.1.4.10.1.37	Gauge32	read-only	This object indicates the bit rate received from a stream source.
G32 ctpcRxCallLostPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.15	Gauge32	read-only	This object specifies the micropercent of packets failed to reach a stream source.
CTP ctpcRxCodec	1.3.6.1.4.1.9.9.644.1.4.10.1.29	CtpcCodecType	read-only	This object specifies the received media codec type of a stream source.
QOS ctpcRxCoSCurrent	1.3.6.1.4.1.9.9.644.1.4.9.1.11	QosLayer2Cos	read-only	This object specifies the COS marking for the current call's incoming stream.
QOS ctpcRxCoSPrevious	1.3.6.1.4.1.9.9.644.1.4.9.1.12	QosLayer2Cos	read-only	This object specifies the previous COS marking for the current call's incoming stream.
DSC ctpcRxDscpCurrent	1.3.6.1.4.1.9.9.644.1.4.9.1.9	Dscp	read-only	This object specifies the DSCP marking for the current call's incoming stream.
DSC ctpcRxDscpPrevious	1.3.6.1.4.1.9.9.644.1.4.9.1.10	Dscp	read-only	This object specifies the previous DSCP marking for the current call's incoming stream.
C64 ctpcRxDuplicatePackets	1.3.6.1.4.1.9.9.644.1.4.10.1.17	Counter64	read-only	This object specifies the number duplicated packets received by a stream source.
U32 ctpcRxFrameRate	1.3.6.1.4.1.9.9.644.1.4.10.1.30	Unsigned32	read-only	This object specifies the received frame rate of a stream source.
C64 ctpcRxIDRPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.19	Counter64	read-only	This object specifies the number of IDR packets received by a stream source.
C64 ctpcRxLatePackets	1.3.6.1.4.1.9.9.644.1.4.10.1.18	Counter64	read-only	This object specifies the number late packets received by a stream source.
C64 ctpcRxLostPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.13	Counter64	read-only	This object specifies the number packets failed to reach a stream source.
G32 ctpcRxMaxCallLostPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.40	Gauge32	read-only	This object indicates the maximum micropercent of packets failed to reach a stream source for the duration of a call.
G32 ctpcRxMaxCallLostPacketsRecTime	1.3.6.1.4.1.9.9.644.1.4.10.1.41	Gauge32	read-only	This object indicates the elapsed time since the call is established when the maximum packet loss of a call is recorded.
G32 ctpcRxMaxPeriodLostPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.39	Gauge32	read-only	This object indicates the maximum micropercent of packets failed to reach a stream source within the last sample period that specified in ctpcSamplePeriod. When a call is terminated, the value will be reset to '0'.
C64 ctpcRxOutOfOrderPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.16	Counter64	read-only	This object specifies the number packets received out of order by a stream source.
G32 ctpcRxPeriodBitRate	1.3.6.1.4.1.9.9.644.1.4.10.1.38	Gauge32	read-only	This object indicates the bit rate received from a stream source within the last sample period that specified in ctpcSamplePeriod.
G32 ctpcRxPeriodLostPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.14	Gauge32	read-only	This object specifies the micropercent of packets failed to reach a stream source within the last sample period specified in ctpcSamplePeriod. When a call is terminated, the value will be reset to '0'.
G32 ctpcRxShapingWindow	1.3.6.1.4.1.9.9.644.1.4.10.1.20	Gauge32	read-only	This object specifies the time span between the last video packet and first video packet of a received video frame. This object is only applicable for video stream type.
C64 ctpcRxTotalBytes	1.3.6.1.4.1.9.9.644.1.4.10.1.11	Counter64	read-only	This object specifies the total number of bytes received by a stream source.
C64 ctpcRxTotalPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.12	Counter64	read-only	This object specifies the total number of packets received by a stream source.
G32 ctpcRxVideoHorzPixels	1.3.6.1.4.1.9.9.644.1.4.10.1.33	Gauge32	read-only	This object specifies the number of horizontal pixels in the incoming video stream. When a call is terminated, the value will be the last recorded number of horizontal pixels for the incoming video stream.
G32 ctpcRxVideoVertPixels	1.3.6.1.4.1.9.9.644.1.4.10.1.34	Gauge32	read-only	This object specifies the number of vertical pixels in the incoming video streams. When a call is terminated, the value will be the last recorded number of vertical pixels for the incoming video stream.
U32 ctpcSamplePeriod	1.3.6.1.4.1.9.9.644.1.4.5	Unsigned32	read-write	This object specifies a sample period by which the following objects are based on: ctpcAvgPeriodLatency, ctpcMaxPeriodLatency, ctpcTxPeriodLostPackets, ctpcRxPeriodLostPackets, ctpcAvgPeriodJitter, ctpcMaxPeriodJitter
INT ctpcSecurity	1.3.6.1.4.1.9.9.644.1.4.8.1.9	INTEGER	read-create	This object specifies the call security level. nonSecured (1) -- Neither media packets nor signaling packets are encrypted. authenticated (2) -- Signaling packets are authenticated and/or encrypted but not the media packets. secured (3) -- Both media packets and signaling packets are encrypted. unknown (4) -- Cannot detect the security state of a call.
DAT ctpcStartDateAndTime	1.3.6.1.4.1.9.9.644.1.4.8.1.6	DateAndTime	read-only	This object specifies the value of local date and time when a call is started.
CTP ctpcState	1.3.6.1.4.1.9.9.644.1.4.8.1.11	CtpcStateCode	read-create	This object specifies the call state.
CTP ctpcStatEventCrossedType	1.3.6.1.4.1.9.9.644.1.5.3.1.4	CtpcStatThreshCrossedType	read-only	This object specifies the type of threshold which was crossed and thereby triggered this event.
UNS ctpcStatEventCrossedValue	1.3.6.1.4.1.9.9.644.1.5.3.1.3	Unsigned64	read-only	This object specifies the value of monitoring object when the threshold was crossed.
U32 ctpcStatEventHistLastIndex	1.3.6.1.4.1.9.9.644.1.5.2	Unsigned32	read-only	This object specifies the value of the ctpcStatEventHistIndex object corresponding to the last entry added to the table by the agent. If the management client uses the notifications defined by this module, then it can poll this object to determine whether it has missed a notification sent by the agent.
ctpcStatEventHistory	1.3.6.1.4.1.9.9.644.1.5
ctpcStatEventHistoryEntry	1.3.6.1.4.1.9.9.644.1.5.3.1		not-accessible	An entry contains information about a Telepresence call monitoring threshold crossed event.
U32 ctpcStatEventHistoryIndex	1.3.6.1.4.1.9.9.644.1.5.3.1.1	Unsigned32	not-accessible	A unique non-zero integer value that identifies a row in this table. The value of this table starts from '1' and monotonically increases for each threshold crossed event received by the agent. If the value of this object is '4294967295', the agent will reset it to '1' upon receiving the next event.
ctpcStatEventHistoryTable	1.3.6.1.4.1.9.9.644.1.5.3		not-accessible	This table contains a history of Telepresence call monitoring thresholds crossed events. After management system initialization (i.e. when sysUpTime is reset to zero), this table records all notifications until it reaches its capacity specified in ctpcStatEventHistTableSize. Thereafter, it remains full by retaining the most recent notifications.
U32 ctpcStatEventHistTableSize	1.3.6.1.4.1.9.9.644.1.5.1	Unsigned32	read-write	This object specifies the number of entries that the ctpcStatEventHistoryTable can contain. When the capacity of the ctpcStatEventHistoryTable has reached, the value specified by this object, then the agent deletes the oldest entry in order to accommodate the new entry. A value of '0' prevents any history from being retained.
NUM ctpcStatEventMonObjectInst	1.3.6.1.4.1.9.9.644.1.5.3.1.2	VariablePointer	read-only	This object specifies a complete OID of a monitoring object which was crossed. For example, the OID of ctpcAvgPeriodLatency.1.video would represent video latency of a call with call index '1' crossed the threshold set by the corresponding ctpcStatMonitoredEntry.
TIK ctpcStatEventTimeStamp	1.3.6.1.4.1.9.9.644.1.5.3.1.5	TimeTicks	read-only	This object specifies the value of the sysUpTime object at the time the notification was generated.
U32 ctpcStatFallingThreshold	1.3.6.1.4.1.9.9.644.1.3.1.1.5	Unsigned32	read-create	This object specifies the falling threshold of a monitoring attribute. When the call period value of the corresponding attribute is less than or equal to this threshold, [ and the value at the last sampling interval was greater than this threshold, ] a single event will be generated. A single event will also be generated if the first call period value of the corresponding attribute after this entry becomes 'active' is less than or equal to this threshold and the associated ctpcStatStartupAlarm is equal to fallingAlarm(1) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the call period value of the corresponding attribute rises above this threshold and reaches the corresponding ctpcStatRisingThreshold. If this object is not specified when the row is created, default value based on the value of the corresponding instance of ctpcStatMonitoredType may be set by the agent. This object may not be modified if the associated ctpcStatMonitoredStatus object is equal to active(1).
ctpcStatMonitoredEntry	1.3.6.1.4.1.9.9.644.1.3.1.1		not-accessible	An entry contains a particular threshold configuration on an attribute for a stream type. For example, if latency of video stream is configured; average period latency of active Telepresence calls will be monitored. A management station wishing to monitor a call statistical attribute should create the associated instance of the row status. Once the appropriate instance of all the configuration objects have been created, either by an explicit SNMP set request or by default, the row status should be set to 'active' to initiate the monitoring request. Note that only active call streams are monitored.
ROW ctpcStatMonitoredStatus	1.3.6.1.4.1.9.9.644.1.3.1.1.7	RowStatus	read-create	This object specifies the status of ctpcStatMonitoredEntry. Once the entry status is set to 'active', the call statistics monitoring will be started. If this object is set to 'notInService' or 'destroy', the monitoring will be disabled to the corresponding stream type on the corresponding monitoring attribute.
INT ctpcStatMonitoredStreamType	1.3.6.1.4.1.9.9.644.1.3.1.1.2	INTEGER	not-accessible	This object specifies a active Telepresence stream type which to be monitored. If the value of this object is 'all', all stream types are monitored with the corresponding ctpcStatRisingThreshold and/or ctpcStatFallingThreshold for ctpcStatMonitoredType. Moreover, if this value is 'all', there cannot be another row for the same value of ctpcStatMonitoredType which is either 'video' or 'audio'. If ctpcStatMonitoredType has value latency(1) or authFailurePacket(4), this object will have value '0'. Note that some Telepresence systems may not support different thresholds for different stream type.
ctpcStatMonitoredTable	1.3.6.1.4.1.9.9.644.1.3.1		not-accessible	A table of configuration information for the monitoring of statistics of active Telepresence calls. The monitoring feature has a hysteresis mechanism to limit the generation of events. This mechanism generates one event as a threshold is crossed in the appropriate direction. No more events are generated for that threshold until the opposite threshold is crossed.
CTP ctpcStatMonitoredType	1.3.6.1.4.1.9.9.644.1.3.1.1.1	CtpcStatMonitoredAttribute	not-accessible	This object specifies a statistical attribute which to be monitored.
CTP ctpcStatMonitoredUnit	1.3.6.1.4.1.9.9.644.1.3.1.1.3	CtpcStatMonitoredAttributeUnit	read-only	This object specifies the corresponding unit of a monitoring attribute. The following table lists the possible values of this object, given the value of the corresponding instance of ctpcStatMonitoredType. ctpcStatMonitoredType ctpcStatMonitoredUnit ---------------------------------------------------- latency(1) milliseconds(1) jitter(2) milliseconds(1) packetLoss(3) micropercent(2) authFailurePacket(4) packets(3)
ctpcStatMonitorObjects	1.3.6.1.4.1.9.9.644.1.3
NTF ctpcStatNotificaion	1.3.6.1.4.1.9.9.644.0.2			This notification is sent when a call monitoring threshold is crossed.
T/F ctpcStatNotifyEnable	1.3.6.1.4.1.9.9.644.1.1.1	TruthValue	read-write	This object controls generation of notifications for the real-time call statistics data monitoring. Call statistics monitoring threshold can be set by creating a corresponding ctpcStatMonitoredEntry. Notification will be generated based on the value of the ctpcStatStartupAlarm and the thresholds. When the object is 'true', the agent will generate notification when the monitoring threshold is crossed. When the object is 'false', the agent will not generate notification when the monitoring threshold is crossed.
ctpcStatObjects	1.3.6.1.4.1.9.9.644.1.4
U32 ctpcStatOverallCalls	1.3.6.1.4.1.9.9.644.1.4.1	Unsigned32	read-only	This object specifies total number of calls since Telepresence system was first in service. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it wraps around and starts increasing again from '1'.
U32 ctpcStatOverallCallTime	1.3.6.1.4.1.9.9.644.1.4.2	Unsigned32	read-only	This object specifies elapsed time of calls since Telepresence system was first in service. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it wraps around and starts increasing again from '1'.
U32 ctpcStatRisingThreshold	1.3.6.1.4.1.9.9.644.1.3.1.1.4	Unsigned32	read-create	This object specifies the rising threshold of a monitoring attribute. When the call period value of the corresponding attribute is greater than or equal to this threshold, a single event will be generated. A single event will also be generated if the first call period value of the corresponding attribute after this entry becomes 'active' is greater than or equal to this threshold and the associated ctpcStatStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the call period value of the corresponding attribute falls below this threshold and reaches the corresponding ctpcStatFallingThreshold. If this object is not specified when the row is created, default value based on the value of the corresponding instance of ctpcStatMonitoredType may be set by the agent. This object may not be modified if the associated ctpcStatMonitoredStatus object is equal to active(1).
CTP ctpcStatStartupAlarm	1.3.6.1.4.1.9.9.644.1.3.1.1.6	CtpcStatAlarmMode	read-create	This object specifies the alarm that may be sent after the entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the ctpcStatRisingThreshold and ctpcStatStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the ctpcStatFallingThreshold and ctpcStatStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated ctpcStatMonitoredStatus object is equal to active(1).
ctpcStatStreamSourceEntry	1.3.6.1.4.1.9.9.644.1.4.10.1		not-accessible	An entry contains a stream source information of a call. The entry will be deleted when the corresponding ctpcEntry specified by ctpcIndex is removed.
ctpcStatStreamSourceTable	1.3.6.1.4.1.9.9.644.1.4.10		not-accessible	A table for call stream source information.
ctpcStatStreamTypeEntry	1.3.6.1.4.1.9.9.644.1.4.9.1		not-accessible	An entry contains information on a particular stream type of a call. The entry will be deleted when the corresponding ctpcEntry specified by ctpcIndex is removed.
ctpcStatStreamTypeTable	1.3.6.1.4.1.9.9.644.1.4.9		not-accessible	A table of stream type information of a call.
U32 ctpcStatTotalCalls	1.3.6.1.4.1.9.9.644.1.4.3	Unsigned32	read-only	This object specifies total number of calls since Telepresence system was last rebooted. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it wraps around and starts increasing again from '1'.
U32 ctpcStatTotalCallTime	1.3.6.1.4.1.9.9.644.1.4.4	Unsigned32	read-only	This object specifies elapsed time of calls since Telepresence system was last rebooted. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it wraps around and starts increasing again from '1'.
CTP ctpcStreamSource	1.3.6.1.4.1.9.9.644.1.4.10.1.1	CtpcStreamSourceType	not-accessible	This object specifies the call stream source.
CTP ctpcStreamType	1.3.6.1.4.1.9.9.644.1.4.9.1.1	CtpcStreamMediaType	not-accessible	This object specifies the call stream type.
ctpcTable	1.3.6.1.4.1.9.9.644.1.4.8		not-accessible	A table for Telepresence call information. After management system initialization (i.e. when sysUpTime is reset to zero), this table records all calls until it reaches its capacity specifed in ctpcTableSize. Thereafter, it remains full by retaining the most recent calls information.
U32 ctpcTableLastIndex	1.3.6.1.4.1.9.9.644.1.4.7	Unsigned32	read-only	This object specifies the value of the ctpcIndex object corresponding to the last entry added to the table. When it reaches a maximum value of 2^32-1 (4294967295 decimal), it wraps around and starts increasing again from '1'.
I32 ctpcTableSize	1.3.6.1.4.1.9.9.644.1.4.6	Integer32	read-write	This object specifies the maximum number of entries of the ctpcTable. Some agents restrict the maximum value of this object to be less than 500. When the capacity of the ctpcTable has reached the value specified by this object, then the agent deletes the oldest entry in order to accommodate the new entry. When this object is set to '-1', ctpcTableSize will not set maximum entries that ctpcTable is contained. The table size in turns may be limited by the associated MIB such as CISCO-TELEPRESENCE-MEETING-MIB.
T/F ctpcTxActive	1.3.6.1.4.1.9.9.644.1.4.10.1.2	TruthValue	read-only	This object is set to 'true' if data transmit from a stream source is 'active'.
G32 ctpcTxCallBitRate	1.3.6.1.4.1.9.9.644.1.4.10.1.35	Gauge32	read-only	This object indicates the bit rate transmitted from a stream source.
G32 ctpcTxCallLostPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.7	Gauge32	read-only	This object specifies the micropercent of packets failed to deliver from a stream source for the duration of a call.
CTP ctpcTxCodec	1.3.6.1.4.1.9.9.644.1.4.10.1.27	CtpcCodecType	read-only	This object specifies the transmitted media codec type of a stream source.
IP ctpcTxDestAddr	1.3.6.1.4.1.9.9.644.1.4.8.1.5	InetAddress	read-only	This object specifies the address of the media packets forwarded to in the format given by the corresponding instance of ctpcTxDestAddrType.
IPt ctpcTxDestAddrType	1.3.6.1.4.1.9.9.644.1.4.8.1.4	InetAddressType	read-only	This object specifies the address type of the corresponding instance of ctpcTxDestAddr.
DSC ctpcTxDscpAudioConfigured	1.3.6.1.4.1.9.9.644.1.2.8	Dscp	read-only	This object specifies the configured DSCP for outgoing streams for audio-only call.
DSC ctpcTxDscpTelepresenceConfigured	1.3.6.1.4.1.9.9.644.1.2.7	Dscp	read-only	This object specifies the configured DSCP for all outgoing streams for a Telepresence call.
U32 ctpcTxFrameRate	1.3.6.1.4.1.9.9.644.1.4.10.1.28	Unsigned32	read-only	This object specifies the transmitted frame rate of a stream source.
C64 ctpcTxIDRPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.8	Counter64	read-only	This object specifies the number of IDR packets transmitted from a stream source.
C64 ctpcTxLostPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.5	Counter64	read-only	This object specifies the number packets failed to deliver from a stream source.
G32 ctpcTxPeriodBitRate	1.3.6.1.4.1.9.9.644.1.4.10.1.36	Gauge32	read-only	This object indicates the bit rate transmitted from a stream source within the last sample period that specified in ctpcSamplePeriod.
G32 ctpcTxPeriodLostPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.6	Gauge32	read-only	This object specifies the micropercent of packets failed to deliver from a stream source within the last sample period specified in ctpcSamplePeriod. When a call is terminated, the value will be reset to '0'.
G32 ctpcTxShapingWindow	1.3.6.1.4.1.9.9.644.1.4.10.1.9	Gauge32	read-only	This object specifies the time span between the last video packet and first video packet of a transmitted video frame. This object is only applicable for video stream type.
C64 ctpcTxTotalBytesEx	1.3.6.1.4.1.9.9.644.1.4.10.1.3	Counter64	read-only	This object specifies the total number of bytes transmitted from a stream source.
C64 ctpcTxTotalPackets	1.3.6.1.4.1.9.9.644.1.4.10.1.4	Counter64	read-only	This object specifies the total number of packets transmitted from a stream source.
G32 ctpcTxVideoHorzPixels	1.3.6.1.4.1.9.9.644.1.4.10.1.31	Gauge32	read-only	This object specifies the number of horizontal pixels in the outgoing video stream. When a call is terminated, the value will be the last recorded number of horizontal pixels for the outgoing video stream.
G32 ctpcTxVideoVertPixels	1.3.6.1.4.1.9.9.644.1.4.10.1.32	Gauge32	read-only	This object specifies the number of vertical pixels in the outgoing video stream. When a call is terminated, the value will be the last recorded number of vertical pixels for the outgoing video stream.
INT ctpcType	1.3.6.1.4.1.9.9.644.1.4.8.1.8	INTEGER	read-create	This object specifies the call type. audioVideo (1) -- Telepresence call. audioOnly (2) -- Audio call. unknown (3) -- The system cannot detect the type of a call. Some Telepresence systems only support audio-video call.

RFC description

Manages and monitors audio-video telepresence calls and meetings on Cisco telepresence systems.

Start monitoring Cisco TelePresence room systems and endpoints with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-TELEPRESENCE-CALL-MIB