CISCO-ITP-DSMR-SMPP-MIB

All MIBs › CISCO-ITP-DSMR-SMPP-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2005-05-18

Category: Cisco Devices, SNA and Legacy Protocols, Telephony and VoIP

Description: Manages ITP DSMR SMPP (Short Message Peer-to-Peer) protocol connections and message routing.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-ITP-DSMR-SMPP-MIB?

CISCO-ITP-DSMR-SMPP-MIB manages Distributed Short Message Routing (DSMR) sessions that use the Short Message Peer-to-Peer (SMPP) protocol, part of Cisco's ITP (IP Transfer Point) SS7/telecom signaling technology area used for SMS routing between messaging entities. It exposes configuration data about SMPP session profiles, including bind type, timers (inactivity, keepalive, response, session-init), calling party, and send window, along with notification enablement for session-state changes. It is used to monitor the software/protocol status of SMPP sessions on a Cisco ITP platform, for example confirming a profile's cdsmrSmppProfileRowStatus is active and that session-state-change notifications fire appropriately when an SMPP bind goes up or down. It is part of the broader Cisco ITP MIB family and depends on SS7/SIGTRAN-related conventions defined in companion ITP MIBs such as CISCO-ITP-TC-MIB. It is typically deployed on Cisco ITP nodes acting as SMS routing gateways in mobile carrier signaling networks. Network engineers evaluating or troubleshooting this functionality can download the CISCO-ITP-DSMR-SMPP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-ITP-DSMR-SMPP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ITP (IP Transfer Point) SS7 signaling gateway

Monitoring Examples

An operator would poll cdsmrSmppProfileTable/cdsmrSmppProfileTableEntry, indexed by cdsmrSmppProfileName, checking cdsmrSmppProfileBindType and cdsmrSmppProfileRowStatus to confirm the SMPP session profile is correctly bound and active. Timer fields like cdsmrSmppProfileInactivityTimer, cdsmrSmppProfileKeepaliveTimer, and cdsmrSmppProfileResponseTimer reveal whether a session is configured to tolerate expected network latency. A profile whose row status is not active, or whose cdsmrSmppSessionStateNotifEnable-triggered notifications show frequent state flapping, would indicate an unstable SMPP link to the SMS peer.

What Can Be Monitored

SMPP profile bind type
session row status
inactivity/keepalive/response timers
send window size
session state-change notifications

Imported Objects

From CISCO-ITP-GSP-MIB

cgspCLLICode	OBJECT-TYPE
cgspEventSequenceNumber	OBJECT-TYPE
cgspInstNetwork	OBJECT-TYPE

From CISCO-ITP-MLR-MIB

CmlrName

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cdsmrSmppDestSentRequests OID:

Select a Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cdsmrSmppDestSentRequests into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of SMS requests sent to destination. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in requests), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoItpDsmrSmppMIB	1.3.6.1.4.1.9.9.1301			The MIB for providing information about Distributed Short Message Routing delivery using Short Message Peer-to-Peer protocol. Acronyms and Terms DSMR Distributed Short Message Routing SMPP Short Message Peer-to-Peer (protocol) SMS Short Message Service UCP Universal Computer Protocol. WRR Weighted Round Robin. A variation of the round robin algorithm that uses server weights to allow uneven distribution of traffic among a set of available servers. ********************************************
ciscoItpDsmrSmppMIBNotifs	1.3.6.1.4.1.9.9.1301.0
NTF ciscoItpDsmrSmppSessionState	1.3.6.1.4.1.9.9.1301.0.1			This notification is generated whenever UCP destination changes states. This notification provides information on the availablity of the destination to receive and process packets using the SMPP protocol.
ciscoItpDsmrSmppMIBObjects	1.3.6.1.4.1.9.9.1301.1
cdsmrSmppScalars	1.3.6.1.4.1.9.9.1301.1.0
T/F cdsmrSmppSessionStateNotifEnable	1.3.6.1.4.1.9.9.1301.1.0.1	TruthValue	read-write	A control to enable or disable notifications as follows: 'true' Indicates that the ciscoItpDsmrSmppSessionState notification should be generated.. 'false' Indicates that ciscoItpDsmrSmppSessionState notification generation is disabled.
cdsmrSmppProfileTable	1.3.6.1.4.1.9.9.1301.1.2		not-accessible	A table that is used to monitor specific information used to configure short message peer-to-peer protocol profile. Entries are added to this table via cdsmrSmppProfileRowStatus in accordance with the RowStatus convention.
cdsmrSmppProfileTableEntry	1.3.6.1.4.1.9.9.1301.1.2.1		not-accessible	Each entry defines parameter that can be used to default values for sessions.
CML cdsmrSmppProfileName	1.3.6.1.4.1.9.9.1301.1.2.1.1	CmlrName	not-accessible	A name used to define a collection of parameters for short message peer-to-peer protocol. A name that is used to identify a unique SMPP profile.
CDS cdsmrSmppProfileBindType	1.3.6.1.4.1.9.9.1301.1.2.1.2	CdsmrSmppBindType	read-create	Specifies allowed types of binds for session.
CDS cdsmrSmppProfileInactivityTimer	1.3.6.1.4.1.9.9.1301.1.2.1.3	CdsmrSmppInactivityTimer	read-create	This object defines the allowed values used to define inactivity timer used by Short Message Peer-to-Peer session. Indicates the maximum time lapse allowed time between transactions before destination is considered inactive. The value for this object should be two to three times the value specified for the cdsmrSmppProfileKeepaliveTimer object.
CDS cdsmrSmppProfileKeepaliveTimer	1.3.6.1.4.1.9.9.1301.1.2.1.4	CdsmrSmppKeepaliveTimer	read-create	This object defines the allowed values used to define keep alive timer used by Short Message Peer-to-Peer session.
T/F cdsmrSmppProfileCallingParty	1.3.6.1.4.1.9.9.1301.1.2.1.5	TruthValue	read-create	This object is used to indicate presence of optional calling party option.
CDS cdsmrSmppProfileResponseTimer	1.3.6.1.4.1.9.9.1301.1.2.1.6	CdsmrSmppResponseTimer	read-create	This object defines the allowed values used to define response timer used by Short Message Peer-to-Peer session. This is the amount of time to wait before retransmitting packet.
CDS cdsmrSmppProfileSendWindow	1.3.6.1.4.1.9.9.1301.1.2.1.7	CdsmrSmppSendWindow	read-create	This object defines the allowed size of send window used by Short Message Peer-to-Peer session window.
CDS cdsmrSmppProfileSessionInitTimer	1.3.6.1.4.1.9.9.1301.1.2.1.8	CdsmrSmppSessionInitTimer	read-create	This object defines the allowed values used to define session initiation timer used to create Short Message Peer-to-Peer session. This specifies the maximum amount of time to wait for the session Bind to be received.
ROW cdsmrSmppProfileRowStatus	1.3.6.1.4.1.9.9.1301.1.2.1.9	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cdsmrSmppProfileTable following the RowStatus textual convention.
cdsmrSmppSessionTable	1.3.6.1.4.1.9.9.1301.1.3		not-accessible	A table that is used to collection information on short message peer-to-peer protocol sessions. Entries are added to this table via cdsmrSmppSessionRowStatus in accordance with the RowStatus convention.
cdsmrSmppSessionTableEntry	1.3.6.1.4.1.9.9.1301.1.3.1		not-accessible	Each entry defines parameter and state information on short message peer-to-peer protocol sessions.
INE cdsmrSmppSessionLocalPortNumber	1.3.6.1.4.1.9.9.1301.1.3.1.1	InetPortNumber	not-accessible	Local port number used to establish short message peer-to-peer protocol.
IPt cdsmrSmppSessionLocalIpAddrType	1.3.6.1.4.1.9.9.1301.1.3.1.2	InetAddressType	read-create	This object contains the type of the local IP address used to create an session.
IP cdsmrSmppSessionLocalIpAddress	1.3.6.1.4.1.9.9.1301.1.3.1.3	InetAddress	read-create	This object contains the local IP address used to create the session with the partner of this session.
T/F cdsmrSmppSessionDynamicDest	1.3.6.1.4.1.9.9.1301.1.3.1.4	TruthValue	read-create	Indicates whether dynamic destinations are allowed as follows. 'true' - dynamic destination are allowed. 'false' - dynamic destinations are not allowed.
ROW cdsmrSmppSessionRowStatus	1.3.6.1.4.1.9.9.1301.1.3.1.5	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cdsmrSmppSessionTable following the RowStatus textual convention.
cdsmrSmppDestTable	1.3.6.1.4.1.9.9.1301.1.4		not-accessible	A table that is used to define a collection of information on short message destinations. One or more destination is defined under each session using peer to peer protocol. Entries are added to this table via cdsmrSmppDestRowStatus in accordance with the RowStatus convention.
cdsmrSmppDestTableEntry	1.3.6.1.4.1.9.9.1301.1.4.1		not-accessible	Each entry defines parameter and state information on short message peer-to-peer protocol destinations.
CML cdsmrSmppDestName	1.3.6.1.4.1.9.9.1301.1.4.1.1	CmlrName	not-accessible	A name used to uniquely identify a destination using short message peer-to-peer protocol.
CDS cdsmrSmppDestBindType	1.3.6.1.4.1.9.9.1301.1.4.1.2	CdsmrSmppBindType	read-create	Specifies allowed types of binds for session.
CDS cdsmrSmppDestInactivityTimer	1.3.6.1.4.1.9.9.1301.1.4.1.3	CdsmrSmppInactivityTimer	read-create	This object defines the allowed values used to define inactivity timer used by Short Message Peer-to-Peer session. Indicates the maximum time lapse allowed between transactions before destination is considered inactive.
CDS cdsmrSmppDestKeepaliveTimer	1.3.6.1.4.1.9.9.1301.1.4.1.4	CdsmrSmppKeepaliveTimer	read-create	This object defines the allowed values used to define keep alive timer used by Short Message Peer-to-Peer session.
T/F cdsmrSmppDestCallingParty	1.3.6.1.4.1.9.9.1301.1.4.1.5	TruthValue	read-create	This textual convention is used to indicate presence of optional calling party option.
CDS cdsmrSmppDestResponseTimer	1.3.6.1.4.1.9.9.1301.1.4.1.6	CdsmrSmppResponseTimer	read-create	This object defines the allowed values used to define response timer used by Short Message Peer-to-Peer session. This is the amount of time to wait before retransmitting packet.
CDS cdsmrSmppDestSendWindow	1.3.6.1.4.1.9.9.1301.1.4.1.7	CdsmrSmppSendWindow	read-create	This object defines the allowed size of send window used by Short Message Peer-to-Peer session.
CDS cdsmrSmppDestSessionInitTimer	1.3.6.1.4.1.9.9.1301.1.4.1.8	CdsmrSmppSessionInitTimer	read-create	This object defines the allowed values used to define session initiation timer used to create Short Message Peer-to-Peer session. This specifies the maximum amount of time to wait for the session Bind to be received.
INE cdsmrSmppDestRemotePortNumber	1.3.6.1.4.1.9.9.1301.1.4.1.9	InetPortNumber	read-create	Remote port number used to establish short message peer-to-peer protocol session.
IPt cdsmrSmppDestRemoteIpAddrType	1.3.6.1.4.1.9.9.1301.1.4.1.10	InetAddressType	read-create	This object contains the type of the remote IP address used to create an session.
IP cdsmrSmppDestRemoteIpAddress	1.3.6.1.4.1.9.9.1301.1.4.1.11	InetAddress	read-create	This object contains the remote IP address used to create the session.
CML cdsmrSmppDestProfileName	1.3.6.1.4.1.9.9.1301.1.4.1.12	CmlrName	read-create	Specifies Profile from cdsmrSmppProfileTable table to define common default parameters for destination.
INT cdsmrSmppDestState	1.3.6.1.4.1.9.9.1301.1.4.1.13	INTEGER	read-only	Current state of destination. 'active' - Destination is available. 'inactive' - Destination is unvailable. 'open' - Device is listening on port for destination to establish connection.
C32 cdsmrSmppDestSentRequestsEx	1.3.6.1.4.1.9.9.1301.1.4.1.14	Counter32	read-only	Number of SMS requests sent to destination.
C32 cdsmrSmppDestRcvdRequests	1.3.6.1.4.1.9.9.1301.1.4.1.15	Counter32	read-only	Number of SMS requests received from destination.
C32 cdsmrSmppDestSentResponses	1.3.6.1.4.1.9.9.1301.1.4.1.16	Counter32	read-only	Number of SMS responses sent to destination.
C32 cdsmrSmppDestRcvdResponses	1.3.6.1.4.1.9.9.1301.1.4.1.17	Counter32	read-only	Number of SMS responses received from destination.
ROW cdsmrSmppDestRowStatus	1.3.6.1.4.1.9.9.1301.1.4.1.18	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cdsmrSmppDestTable following the RowStatus textual convention.
ciscoItpDsmrSmppMIBConform	1.3.6.1.4.1.9.9.1301.2
ciscoItpDsmrSmppMIBCompliances	1.3.6.1.4.1.9.9.1301.2.1
ciscoItpDsmrSmppMIBCompliance	1.3.6.1.4.1.9.9.1301.2.1.1			The compliance statement for entities which implement the Cisco CISCO-ITP-MLR-MIB
ciscoItpDsmrSmppMIBGroups	1.3.6.1.4.1.9.9.1301.2.2
ciscoItpDsmrSmppGroup	1.3.6.1.4.1.9.9.1301.2.2.1			A collection of objects providing information used to configure Short Message Peer-to-Peer Protocol.
ciscoItpDsmrSmppNotificationsGroup	1.3.6.1.4.1.9.9.1301.2.2.2			DSMR Short Message Peer-to-Peer Protocol notification objects.

RFC description

Manages Distributed Short Message Routing and Short Message Peer-to-Peer protocol delivery for SMS handling.

Start monitoring Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-ITP-DSMR-SMPP-MIB