CISCO-NDE-MIB

All MIBs › CISCO-NDE-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2006-03-01

Category: Cisco Devices, Network Monitoring (RMON)

Description: Manages NetFlow Data Export (NDE) collector destinations and flow export parameters on Cisco network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-NDE-MIB?

CISCO-NDE-MIB is a Cisco Systems, Inc. proprietary MIB configuring NetFlow Data Export (NDE), which exports network-flow records (unidirectional packet sequences between source/destination endpoints) to a collector. Its objects cover the max collector count and a collector table (address type/address, port, status). As a configuration MIB it lets an administrator confirm which NetFlow collectors are configured to receive exported flow data from a Cisco device. It is deployed on Cisco Systems routers/switches with NetFlow Data Export. Engineers can download the CISCO-NDE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-NDE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Systems routers/switches (NetFlow Data Export)

Monitoring Examples

An administrator checks cndeCollectorAddress and cndeCollectorStatus to confirm NetFlow Data Export is correctly sending flow records to the intended collector on a Cisco device.

What Can Be Monitored

NetFlow collector configuration

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoNDEMIB	1.3.6.1.4.1.9.9.226			The Netflow Data Export (NDE) MIB provides instrumentation for configuration and operation of the Netflow Data Export feature. A network flow is defined as an unidirectional sequence of packets between a given source and destination endpoints. Network flows are highly granular; flow endpoints are identified both by IP address as well as by transport layer application port numbers. NetFlow also utilizes the IP Protocol type, Type of Service (ToS) and the input interface identifier to uniquely identify flows. Netflow Data Export refers to the export of Netflow Data using UDP packets to Netflow Data Collector(s). A NetFlow Data Collector (NDC) captures, filters, aggregates, and stores the data from multiple NetFlow enabled devices. NDCs provide fast, scalable, and economical Netflow data.
cndeMIBNotifs	1.3.6.1.4.1.9.9.226.0
ciscoNDEMIBObjects	1.3.6.1.4.1.9.9.226.1
cndeCollectorConfiguration	1.3.6.1.4.1.9.9.226.1.1
U32 cndeMaxCollectors	1.3.6.1.4.1.9.9.226.1.1.1	Unsigned32	read-only	Maximum number of entries allowed in the cndeCollectorTable. A zero indicates unlimitted number of entries. The agent should set this value during initialization, and the vaule for this object cannot be changed during the system's operation
cndeCollectorTable	1.3.6.1.4.1.9.9.226.1.1.2		not-accessible	A control table to configure the NDE collectors. The maximum number of entries is limited by cndeMaxCollectors. The agent sends the NDE packets to each address configured in this table.
cndeCollectorEntry	1.3.6.1.4.1.9.9.226.1.1.2.1		not-accessible	A conceptual row in the cndeCollectorEntry.
IPt cndeCollectorAddressType	1.3.6.1.4.1.9.9.226.1.1.2.1.1	InetAddressType	not-accessible	The type of Internet address used by this entry
IP cndeCollectorAddress	1.3.6.1.4.1.9.9.226.1.1.2.1.2	InetAddress	not-accessible	The Internet address of the collector. This is the address which the Netflow data is exported to.
I32 cndeCollectorPort	1.3.6.1.4.1.9.9.226.1.1.2.1.3	Integer32	not-accessible	The transport port of the collector which the Netflow data is exported to.
ROW cndeCollectorStatus	1.3.6.1.4.1.9.9.226.1.1.2.1.4	RowStatus	read-create	The status object used to manage the rows in this table.
cndeMIBNotifications	1.3.6.1.4.1.9.9.226.2
cndeMIBConformance	1.3.6.1.4.1.9.9.226.3
cndeMIBCompliances	1.3.6.1.4.1.9.9.226.3.1
cndeMIBCompliance	1.3.6.1.4.1.9.9.226.3.1.1			The compliance statement for the CISCO-NDE-MIB. Objects used in an INDEX clause normally have a MAX-ACCESS of 'not-accessible', and the SMIv2 does not allow 'not-accessible' objects to be included in a GROUP clause. Consequently, a minimum syntax cannot be specified for them in an OBJECT clause. So, the following minimum compliance is specified within this DESCRIPTION clause: --OBJECT cndeCollectorAddressType --SYNTAX InetAddressType { ipv4(1) } --DESCRIPTION -- An implementation is only required to support IPv4 -- addresses. --OBJECT cndeCollectorAddress --SYNTAX InetAddress { SIZE(4) } --DESCRIPTION -- An implementation is only required to support IPv4 -- addresses.
cndeMIBGroups	1.3.6.1.4.1.9.9.226.3.2
cndeCollectorConfigurationGroup	1.3.6.1.4.1.9.9.226.3.2.1			A collection of objects for configuring the Netflow Data Export Collectors and ports.

RFC description

Cisco vendor-private MIB for Network Data Export (NDE) monitoring and management.

Start monitoring Cisco routers/switches (NetFlow Data Export) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-NDE-MIB

What Is CISCO-NDE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description