CISCO-GSLB-SYSTEM-MIB

All MIBs › CISCO-GSLB-SYSTEM-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2011-06-06

Category: Cisco Devices, Web and Application Servers

Description: Provides management objects for monitoring system-level status, resources, and operation of the Cisco Global Site Selector (GSS) appliance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-GSLB-SYSTEM-MIB?

This is a Cisco vendor MIB for the Global Site Selector (GSS) appliance, a Global Server Load Balancer (GSLB) device that directs DNS-based traffic to the least-loaded or most-proximate resource; the MIB covers system-level status, resource information, GSLB node/peer status, and proximity statistics. It exposes networked-node identity and status data, peer GSS device relationships and reachability, and DNS-related proximity metrics used in load-balancing decisions. It is strongly monitoring-oriented for both software service status and system health — cgsNodeStatus reveals whether a GSS node is operating correctly, and the cgsPeerTable lets an administrator confirm that all peer GSS appliances in a distributed GSLB deployment are reachable and correctly identified, which is critical since a lost peer can degrade global load-balancing accuracy. It defines its own notifications (ciscoGslbSystemMIBNotifs) for GSLB-specific fault conditions and works alongside standard Cisco system/interface MIBs for underlying hardware health. It is typically deployed in multi-datacenter environments running Cisco GSS appliances to provide DNS-based global server load balancing and disaster-recovery failover, where CISCO-GSLB-SYSTEM-MIB SNMP monitoring helps confirm peer GSS nodes stay reachable across sites.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-GSLB-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Global Site Selector (GSS) appliance

Monitoring Examples

An administrator would poll cgsNodeStatus and cgsNodeLocation/cgsNodeRegion to confirm a given GSS node is healthy and correctly identifies its site, then walk cgsPeerTable/cgsPeerEntry to check cgsPeerAddress and cgsPeerDnsName for each peer GSS device — a peer entry that stops updating or shows a down status would indicate a lost peering relationship, degrading the accuracy of proximity-based DNS responses across the GSLB deployment.

What Can Be Monitored

GSLB node status
node location/region
peer GSS device reachability
peer DNS name/address
proximity statistics

Imported Objects

From CISCO-GSLB-TC-MIB

CiscoGslbNodeServices
CiscoGslbPeerStatus

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressDNS
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-MIB

sysName

OBJECT-TYPE

From SNMPv2-SMI

Counter32
Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
StorageType
TruthValue

How to Use in IPNetwork Monitor

Example using cgsProxEchoSentReqs OID:

Select a Cisco Global Site Selector (GSS) appliance (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cgsProxEchoSentReqs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object indicates the number of DRP echo requests sent by GSLB to all probed devices. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in requests), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
C32 cgsAnswerCountPerRegionId	1.3.6.1.4.1.9.9.589.1.6.3.1.9	Counter32	read-only	This object indicates the total number of times answers in this region are used in replying for DNS queries, since the GSLB device was last started.
G32 cgsAnswerCountRatePerRegionId1Min	1.3.6.1.4.1.9.9.589.1.6.3.1.10	Gauge32	read-only	This object indicates the average per second hit count for answers in this region, calculated during the last 1 minute interval.
G32 cgsAnswerCountRatePerRegionId30Min	1.3.6.1.4.1.9.9.589.1.6.3.1.12	Gauge32	read-only	This object indicates the average per second hit count for answers in this region, calculated during the last 30 minute interval.
G32 cgsAnswerCountRatePerRegionId4Hr	1.3.6.1.4.1.9.9.589.1.6.3.1.13	Gauge32	read-only	This object indicates the average per second hit count for answers in this region, calculated during the last 4 hour interval.
G32 cgsAnswerCountRatePerRegionId5Min	1.3.6.1.4.1.9.9.589.1.6.3.1.11	Gauge32	read-only	This object indicates the average per second hit count for answers in this region, calculated during the last 5 minute interval.
cgsGeneral	1.3.6.1.4.1.9.9.589.1.3
STR cgsLocationComments	1.3.6.1.4.1.9.9.589.1.6.2.1.4	SnmpAdminString	read-create	This object specifies the comments associated with the location.
cgsLocationEntry	1.3.6.1.4.1.9.9.589.1.6.2.1		not-accessible	An entry in cgsLocationTable. Each entry contains the information about a location. Entries can be added/deleted/modified by administrator action.
STR cgsLocationName	1.3.6.1.4.1.9.9.589.1.6.2.1.1	SnmpAdminString	not-accessible	This object specifies the name given uniquely for a location.
STR cgsLocationRegion	1.3.6.1.4.1.9.9.589.1.6.2.1.2	SnmpAdminString	read-create	This object specifies a region to which this location instance is associated. This object is mandatory for a row creation.
ROW cgsLocationRowStatus	1.3.6.1.4.1.9.9.589.1.6.2.1.6	RowStatus	read-create	This object is used to create/delete an entry in the cgsLocationTable
STO cgsLocationStorageType	1.3.6.1.4.1.9.9.589.1.6.2.1.5	StorageType	read-create	This object specifies the storage type for this conceptual row
cgsLocationTable	1.3.6.1.4.1.9.9.589.1.6.2		not-accessible	This table is used to configure locations on the device. It consists a list of locations configured on the GSLB device.
STR cgsLocationZone	1.3.6.1.4.1.9.9.589.1.6.2.1.3	SnmpAdminString	read-create	This object specifies a zone to which this location instance is associated.
NUM cgsNodeCommIfIndex	1.3.6.1.4.1.9.9.589.1.3.3	InterfaceIndexOrZero	read-only	This object is used as an identifier for the interface used by the GSLB device to communicate with peer GSLB devices. The value of this object must be same as the ifIndex reported by IF-MIB for the interface identified by cgsNodeCommIfName.
STR cgsNodeCommIfName	1.3.6.1.4.1.9.9.589.1.3.2	SnmpAdminString	read-write	This object specifies the textual name of the interface used by the GSLB device to communicate with peer GSLB devices. The value of this object must be same as the ifName reported by IF-MIB for the interface instance.
STR cgsNodeLocation	1.3.6.1.4.1.9.9.589.1.3.5	SnmpAdminString	read-write	This object specifies the administratively assigned location for the GSLB device.
STR cgsNodeRegion	1.3.6.1.4.1.9.9.589.1.3.6	SnmpAdminString	read-only	This object specifies the administratively assigned region for the GSLB device. This value corresponds to an instance of cgsLocationRegion from cgsLocationTable.
CIS cgsNodeService	1.3.6.1.4.1.9.9.589.1.3.1	CiscoGslbNodeServices	read-write	This object specifies the type of role of the GSLB device amongst its peers.
CIS cgsNodeStatus	1.3.6.1.4.1.9.9.589.1.3.4	CiscoGslbPeerStatus	read-only	This object specifies the status of the GSLB device as known on the GSLB network of peers.
cgsNotifControl	1.3.6.1.4.1.9.9.589.1.1
cgsNotifObjects	1.3.6.1.4.1.9.9.589.1.2
cgsPeer	1.3.6.1.4.1.9.9.589.1.4
IP cgsPeerAddress	1.3.6.1.4.1.9.9.589.1.4.1.1.2	InetAddress	not-accessible	This object specifies the GSLB peer IP address. The type of IP address is identified by cgsPeerAddressType.
IPt cgsPeerAddressType	1.3.6.1.4.1.9.9.589.1.4.1.1.1	InetAddressType	not-accessible	This object specifies the IP address type of the GSLB peer.
ADR cgsPeerDnsName	1.3.6.1.4.1.9.9.589.1.4.1.1.4	InetAddressDNS	read-only	This object specifies the host name assigned uniquely to a GSLB peer. Its value is same as the value of sysName of the GSLB peer.
cgsPeerEntry	1.3.6.1.4.1.9.9.589.1.4.1.1		not-accessible	An entry in cgsPeerEntryTable. Each entry contains information on the GSLB peers. Entries are added/deleted when a GSLB peer device is added/deleted in GSLB network of peers.
T/F cgsPeerEventNotifEnable	1.3.6.1.4.1.9.9.589.1.1.1	TruthValue	read-write	This object defines the administrative state of sending notifications to signal a GSLB peer status change.
STR cgsPeerLocation	1.3.6.1.4.1.9.9.589.1.4.1.1.3	SnmpAdminString	read-write	This object specifies the administratively assigned location of the GSLB peer. Its value must be same as the value configured in cgsLocationTable.
CIS cgsPeerPrevStatus	1.3.6.1.4.1.9.9.589.1.2.1	CiscoGslbPeerStatus	accessible-for-notify	This object is used for sending the value of cgsPeerStatus before transitioning to new state.
CIS cgsPeerService	1.3.6.1.4.1.9.9.589.1.4.1.1.5	CiscoGslbNodeServices	read-only	This object specifies the type of role the GSLB peer has in a GSLB network of peers. Its value is same as value of cgsNodeService of the GSLB peer.
CIS cgsPeerStatus	1.3.6.1.4.1.9.9.589.1.4.1.1.6	CiscoGslbPeerStatus	read-only	This object specifies the status of GSLB peer as known to the reporting GSLB device.
cgsPeerTable	1.3.6.1.4.1.9.9.589.1.4.1		not-accessible	This table lists the information on peers in the GSLB network of devices.
STR cgsPeerVersion	1.3.6.1.4.1.9.9.589.1.4.1.1.7	SnmpAdminString	read-only	This object specifies the software version installed on the GSLB peer.
C32 cgsProxEchoRcvdResps	1.3.6.1.4.1.9.9.589.1.5.1.1.7	Counter32	read-only	This object indicates the number of DRP echo responses received by GLSB from all probed devices.
C32 cgsProxEchoSentReqsEx	1.3.6.1.4.1.9.9.589.1.5.1.1.6	Counter32	read-only	This object indicates the number of DRP echo requests sent by GSLB to all probed devices.
U32 cgsProxPeakRcvdRate	1.3.6.1.4.1.9.9.589.1.5.1.1.15	Unsigned32	read-only	This object indicates the peak received DRP response rate per second.
U32 cgsProxPeakSendRate	1.3.6.1.4.1.9.9.589.1.5.1.1.14	Unsigned32	read-only	This object indicates the peak transmitted DRP request rate per second.
IP cgsProxPrimaryAddress	1.3.6.1.4.1.9.9.589.1.5.1.1.3	InetAddress	read-create	This object specifies the IP address of the primary device being probed in the proximity zone. The type of IP address is identified by cgsProxPrimaryAddressType. This object is mandatory for row creation.
IPt cgsProxPrimaryAddressType	1.3.6.1.4.1.9.9.589.1.5.1.1.2	InetAddressType	read-create	This object specifies the IP address type of the primary device being probed in the proximity zone.
C32 cgsProxRcvdMeasureResps	1.3.6.1.4.1.9.9.589.1.5.1.1.9	Counter32	read-only	This object indicates the number of DRP measured responses received by GSLB from all probed devices.
U32 cgsProxRcvdRate	1.3.6.1.4.1.9.9.589.1.5.1.1.13	Unsigned32	read-only	This object indicates the current received DRP response rate per second.
ROW cgsProxRowStatus	1.3.6.1.4.1.9.9.589.1.5.1.1.17	RowStatus	read-create	This object is used to create/delete an entry in the cgsProxZoneTable.
IP cgsProxSecondaryAddress	1.3.6.1.4.1.9.9.589.1.5.1.1.5	InetAddress	read-create	This object specifies the IP address of the secondary device that may be probed for proximity in the proximity zone. The type of IP address is identified by cgsProxSecondaryAddressType.
IPt cgsProxSecondaryAddressType	1.3.6.1.4.1.9.9.589.1.5.1.1.4	InetAddressType	read-create	This object specifies the IP address type of the secondary device that may be probed in the proximity zone.
U32 cgsProxSendRate	1.3.6.1.4.1.9.9.589.1.5.1.1.12	Unsigned32	read-only	This object indicates the current transmitted DRP request rate per second.
C32 cgsProxSentMeasureReqs	1.3.6.1.4.1.9.9.589.1.5.1.1.8	Counter32	read-only	This object indicates the number of DRP measured requests sent by GSLB to all probed devices.
STO cgsProxStorageType	1.3.6.1.4.1.9.9.589.1.5.1.1.16	StorageType	read-create	This object specifies the storage type for this conceptual row.
C32 cgsProxTotalRcvdResps	1.3.6.1.4.1.9.9.589.1.5.1.1.11	Counter32	read-only	This object indicates the total of DRP responses received by GSLB from all probed devices in the proximity zone.
C32 cgsProxTotalSentReqs	1.3.6.1.4.1.9.9.589.1.5.1.1.10	Counter32	read-only	This object indicates the total of DRP requests sent by GSLB to probed device in the proximity zone.
cgsProxZoneEntry	1.3.6.1.4.1.9.9.589.1.5.1.1		not-accessible	An entry in cgsProxZoneTable. Each entry contains information on proximity zones and probing statistics. Entries can be added/deleted/modified by administrator action.
STR cgsProxZoneName	1.3.6.1.4.1.9.9.589.1.5.1.1.1	SnmpAdminString	not-accessible	This object specifies a name given uniquely for a proximity zone.
cgsProxZoneStats	1.3.6.1.4.1.9.9.589.1.5
cgsProxZoneTable	1.3.6.1.4.1.9.9.589.1.5.1		not-accessible	This table is used for configuring proximity zones. It consists a list of proximity probing statistics for each configured proximity zone.
STR cgsRegionComments	1.3.6.1.4.1.9.9.589.1.6.1.1.2	SnmpAdminString	read-create	This object specifies the comments associated with the region.
cgsRegionEntry	1.3.6.1.4.1.9.9.589.1.6.1.1		not-accessible	An entry in cgsRegionTable. Each entry contains the information about a region. Entries can be added/deleted/modified by administrator action.
U32 cgsRegionId	1.3.6.1.4.1.9.9.589.1.6.3.1.1	Unsigned32	not-accessible	This object uniquely identifies a region.
STR cgsRegionIdComments	1.3.6.1.4.1.9.9.589.1.6.3.1.3	SnmpAdminString	read-create	This object specifies the comments associated with the region.
cgsRegionIdEntry	1.3.6.1.4.1.9.9.589.1.6.3.1		not-accessible	An entry in cgsRegionIdTable.Each entry contains the information about a region. Entries can be added/deleted/modified by administrator action.
STR cgsRegionIdName	1.3.6.1.4.1.9.9.589.1.6.3.1.2	SnmpAdminString	read-create	This object specifies the name given uniquely for a region.
ROW cgsRegionIdRowStatus	1.3.6.1.4.1.9.9.589.1.6.3.1.20	RowStatus	read-create	This object is used to create/delete an entry in the cgsRegionIdTable. Users can modify all writable objects in this row when this object value is 'active'. The cgsRegionIdName object need to be set to valid value by the users before user can activate the row.
STO cgsRegionIdStorageType	1.3.6.1.4.1.9.9.589.1.6.3.1.19	StorageType	read-create	This object specifies the storage type for this conceptual row.
cgsRegionIdTable	1.3.6.1.4.1.9.9.589.1.6.3		not-accessible	This table is used to configure regions on the device. It consists a list of regions configured on the GSLB device.
STR cgsRegionName	1.3.6.1.4.1.9.9.589.1.6.1.1.1	SnmpAdminString	not-accessible	This object specifies the name given uniquely for a region.
ROW cgsRegionRowStatus	1.3.6.1.4.1.9.9.589.1.6.1.1.4	RowStatus	read-create	This object is used to create/delete an entry in the cgsRegionTable
STO cgsRegionStorageType	1.3.6.1.4.1.9.9.589.1.6.1.1.3	StorageType	read-create	This object specifies the storage type for this conceptual row.
cgsRegionTable	1.3.6.1.4.1.9.9.589.1.6.1		not-accessible	This table is used to configure regions on the device. It consists a list of regions configured on the GSLB device.
C32 cgsReqCountPerRegionId	1.3.6.1.4.1.9.9.589.1.6.3.1.4	Counter32	read-only	This object indicates the total number of DNS requests received from this region since the GSLB device was last started.
G32 cgsReqCountRatePerRegionId1Min	1.3.6.1.4.1.9.9.589.1.6.3.1.5	Gauge32	read-only	This object indicates the average per second DNS requests received from this region, calculated during the last one minute interval.
G32 cgsReqCountRatePerRegionId30Min	1.3.6.1.4.1.9.9.589.1.6.3.1.7	Gauge32	read-only	This object indicates the average per second DNS requests received from this region , calculated during the last 30 minute interval.
G32 cgsReqCountRatePerRegionId4Hr	1.3.6.1.4.1.9.9.589.1.6.3.1.8	Gauge32	read-only	This object indicates the average per second DNS requests received from this region , calculated during the last 4 hour interval.
G32 cgsReqCountRatePerRegionId5Min	1.3.6.1.4.1.9.9.589.1.6.3.1.6	Gauge32	read-only	This object indicates the average per second DNS requests received from this region , calculated during the last 5 minute interval.
cgsResources	1.3.6.1.4.1.9.9.589.1.6
C32 cgsUnAnswerCountPerRegionId	1.3.6.1.4.1.9.9.589.1.6.3.1.14	Counter32	read-only	This object indicates the total number of times DNS requests from this region have not been answered, since the GSLB device was last started.
G32 cgsUnAnswerCountRatePerRegionId1Min	1.3.6.1.4.1.9.9.589.1.6.3.1.15	Gauge32	read-only	This object indicates the average per second unanswered DNS requests from this region, calculated during the last one minute.
G32 cgsUnAnswerCountRatePerRegionId30Min	1.3.6.1.4.1.9.9.589.1.6.3.1.17	Gauge32	read-only	This object indicates the average per second unanswered DNS requests from this region, calculated during the last 30 minute interval.
G32 cgsUnAnswerCountRatePerRegionId4Hr	1.3.6.1.4.1.9.9.589.1.6.3.1.18	Gauge32	read-only	This object indicates the average per second unanswered DNS requests from this region, calculated during the last 4 hour interval.
G32 cgsUnAnswerCountRatePerRegionId5Min	1.3.6.1.4.1.9.9.589.1.6.3.1.16	Gauge32	read-only	This object indicates the average per second unanswered DNS requests from this region, calculated during the last 5 minute interval.
ciscoGslbSystemGeneralGroup	1.3.6.1.4.1.9.9.589.2.2.1			A collection of objects providing general GSLB status.
ciscoGslbSystemMIB	1.3.6.1.4.1.9.9.589			This MIB module defines objects for network and system information of Global Server Load Balancer(GSLB) as a network device. A GSLB device is used to allocate the least-loaded and proximate resource to the requester. The MIB objects define information about GLSB status, GSLB's peers (other GSLB devices available on its network with which it interacts) information & status, GSLB's proximity information related statistics, etc. Further it defines related notifications. Acronyms and their description: DNS : Domain Name Service (RFC1035). D-proxy : Local DNS name server of the client. Proximity : Refers to the distance or delay, in terms of network topology and not geographic distance, between the requesting client's D-proxy and the resources corresponding to that request. Proximity : To respond to DNS requests with the most probing proximate answers, the GSLB device communicates with a probing device located in each proximity zone to gather round-trip time (RTT) metric information measured between the requesting client's D-proxy and the zone. The GSLB device then directs client requests to an available resource with the lowest RTT value. Probed : This is the device to which the GSLB device device sends a proximity probe. This is done to learn the proximity of the device. DRP : Director Response Protocol (DRP) is a simple User Datagram Protocol (UDP) based application developed by Cisco Systems, Inc. DRP enables Cisco Distributed-Director product to perform global load distribution and content routing in a sophisticated manner that accounts for server availability, relative client-to-server topological proximities, and client-to-server link latency to determine the best server. Using routing table intelligence in the network infrastructure, Distributed-Director transparently redirects end-user service requests to the closest server, as determined by client-to-server topological proximity or client-to-server link latency, resulting in increased access performance seen by the end user. Region : Higher-level geographical groupings that may contain one or more locations. Each location should be assigned to a region. Location : Grouping for devices with common geographical attributes. A location is assigned to a region. A location is also assigned to a zone, which is used for proximity probing. Zone : A network can be logically partioned into zones based on the arrangement of devices and network partion characteristics. A zone can be geographically related to data centers in a continent, a country, or a major city. All devices, such as web servers in a data center, that are located in the same zone have the same proximity value when communicating with other areas of the Internet. Within each zone, there is an active probing device that is configured to accept probing instructions from any GSLB device. Probing here refers to the process of measuring RTT from one probing device to a requesting D-proxy.
ciscoGslbSystemMIBCompliance	1.3.6.1.4.1.9.9.589.2.1.1			Compliance statement for entities which implement the Cisco GSLB System MIB
ciscoGslbSystemMIBComplianceRev1	1.3.6.1.4.1.9.9.589.2.1.2			Compliance statement for entities which implement the Cisco GSLB System MIB
ciscoGslbSystemMIBCompliances	1.3.6.1.4.1.9.9.589.2.1
ciscoGslbSystemMIBConform	1.3.6.1.4.1.9.9.589.2
ciscoGslbSystemMIBGroups	1.3.6.1.4.1.9.9.589.2.2
ciscoGslbSystemMIBNotifs	1.3.6.1.4.1.9.9.589.0
ciscoGslbSystemMIBObjects	1.3.6.1.4.1.9.9.589.1
ciscoGslbSystemNotifControlGroup	1.3.6.1.4.1.9.9.589.2.2.5			This group of objects controls the sending of notifications defined in this MIB module.
ciscoGslbSystemNotifGroup	1.3.6.1.4.1.9.9.589.2.2.7			A collection of objects providing GSLB System events.
ciscoGslbSystemNotifObjectsGroup	1.3.6.1.4.1.9.9.589.2.2.6			A collection of objects that convey information for notifications defined in this MIB module.
NTF ciscoGslbSystemPeerEventStatus	1.3.6.1.4.1.9.9.589.0.1			This notification is sent when the value of cgsPeerStatus changes from one state to another. This notification is reported only by a GSLB device with cgsNodeService value of 'primary'.
ciscoGslbSystemPeerGroup	1.3.6.1.4.1.9.9.589.2.2.2			A collection of objects providing GSLB peer status.
ciscoGslbSystemProxZoneGroup	1.3.6.1.4.1.9.9.589.2.2.3			A collection of objects providing GSLB proximity zone statistics.
ciscoGslbSystemResourceGroup	1.3.6.1.4.1.9.9.589.2.2.4			A collection of objects providing GSLB resource configurations.
ciscoGslbSystemResourceLocationGroup	1.3.6.1.4.1.9.9.589.2.2.8			A collection of objects providing GSLB location resource configurations.
ciscoGslbSystemResourceRegionGroup	1.3.6.1.4.1.9.9.589.2.2.9			A collection of objects providing GSLB region resource configurations.

RFC description

Manages Global Server Load Balancer (GSLB) network and system information including device status, peer interactions, and proximity statistics.

Start monitoring Cisco Global Site Selector (GSS) appliance (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-GSLB-SYSTEM-MIB