CIE1000-SYSUTIL-MIB

All MIBs › CIE1000-SYSUTIL-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2016-02-25

Category: Cisco Devices, Device Management, Hardware and Environment

Description: Manages system utilities for Cisco IE1000 industrial Ethernet switches, including CPU, memory, and system health.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIE1000-SYSUTIL-MIB?

CIE1000-SYSUTIL-MIB is a Cisco-private system-utility MIB for the Cisco IE1000 industrial Ethernet switch family, covering general device identity, capability, and health information. It exposes system information (hostname, contact, location), system time, platform capability flags (warm reboot, POST, ZTP, stack firmware check support), and a temperature-monitoring table keyed by sensor ID. Its central monitoring use is hardware/software status tracking: it lets an admin confirm the device's identity and clock, check whether power-on self-test and zero-touch provisioning are supported, and—most importantly—poll per-sensor temperature readings to catch overheating before it causes a fault in industrial/harsh environments. It is a Cisco-private module that complements the standard SNMPv2-MIB system group (sysName, sysContact) rather than duplicating it, and works alongside CIE1000-PORT-MIB and CIE1000-SYSLOG-MIB in the same product's MIB suite. It is deployed on ruggedized IE1000 switches in factory-floor, utility, and other industrial/OT environments where thermal conditions are a common operational concern, making CIE1000-SYSUTIL-MIB SNMP monitoring a standard safeguard against undetected overheating.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIE1000-SYSUTIL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IE1000 industrial Ethernet switches

Monitoring Examples

An admin would poll cie1000SysutilConfigTemperatureMonitorTable/Entry, indexed by cie1000SysutilConfigTemperatureMonitorSensorId, to track per-sensor temperature against thresholds; a sensor reading trending upward would warn of insufficient ventilation or a fan/enclosure problem before the switch overheats. cie1000SysutilConfigSystemInfoHostname, cie1000SysutilConfigSystemInfoContact, and cie1000SysutilConfigSystemInfoLocation help identify which physical switch and site an alert corresponds to, while cie1000SysutilCapabilitiesPostSupported confirms whether power-on self-test diagnostics ran successfully after a reboot.

What Can Be Monitored

chassis temperature (per sensor)
system hostname/contact/location
system time
POST/warm-reboot/ZTP capability support
stack firmware check support

Imported Objects

From CIE1000-TC

CIE1000DisplayString
CIE1000InterfaceIndex

From CISCO-IE1000-MIB

cie1000SwitchMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cie1000SysutilCapabilities	1.3.6.1.4.1.9.9.832.1.24.1.1
cie1000SysutilCapabilitiesInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.1			A collection of objects.
T/F cie1000SysutilCapabilitiesPostSupported	1.3.6.1.4.1.9.9.832.1.24.1.1.2	TruthValue	read-only	Indicate if POST(Power On Self Test) is supported or not. true(1) means it is supported. false(2) means it is not supported.
T/F cie1000SysutilCapabilitiesStackFwChkSupported	1.3.6.1.4.1.9.9.832.1.24.1.1.4	TruthValue	read-only	Indicate if stack firmware version check is supported or not. true(1) means it is supported. false(2) means it is not supported.
T/F cie1000SysutilCapabilitiesWarmRebootSupported	1.3.6.1.4.1.9.9.832.1.24.1.1.1	TruthValue	read-only	Indicate if warm restart is supported or not. true means it is supported. false means it is not supported.
T/F cie1000SysutilCapabilitiesZtpSupported	1.3.6.1.4.1.9.9.832.1.24.1.1.3	TruthValue	read-only	Indicate if ZTP(Zero Touch Provisioning) is supported or not. true(1) means it is supported. false(2) means it is not supported.
cie1000SysutilConfig	1.3.6.1.4.1.9.9.832.1.24.1.2
cie1000SysutilConfigSystemInfo	1.3.6.1.4.1.9.9.832.1.24.1.2.1
STR cie1000SysutilConfigSystemInfoContact	1.3.6.1.4.1.9.9.832.1.24.1.2.1.2	CIE1000DisplayString	read-write	Contact name.
STR cie1000SysutilConfigSystemInfoHostname	1.3.6.1.4.1.9.9.832.1.24.1.2.1.1	CIE1000DisplayString	read-write	Hostname
cie1000SysutilConfigSystemInfoInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.2			A collection of objects.
STR cie1000SysutilConfigSystemInfoLocation	1.3.6.1.4.1.9.9.832.1.24.1.2.1.3	CIE1000DisplayString	read-write	Location.
cie1000SysutilConfigSystemTime	1.3.6.1.4.1.9.9.832.1.24.1.2.2
cie1000SysutilConfigSystemTimeInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.3			A collection of objects.
STR cie1000SysutilConfigSystemTimeSystemCurTime	1.3.6.1.4.1.9.9.832.1.24.1.2.2.1	CIE1000DisplayString	read-write	Current system time
STR cie1000SysutilConfigSystemTimeSystemCurTimeFormat	1.3.6.1.4.1.9.9.832.1.24.1.2.2.2	CIE1000DisplayString	read-write	Format for setting up current system time
I32 cie1000SysutilConfigTemperatureMonitorCriticalThreshold	1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.4	Integer32	read-write	The critical threshold of temperature monior.
cie1000SysutilConfigTemperatureMonitorEntry	1.3.6.1.4.1.9.9.832.1.24.1.2.3.1		not-accessible	Each row set the sensor config.
I32 cie1000SysutilConfigTemperatureMonitorHighThreshold	1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.3	Integer32	read-write	The high threshold of temperature monior.
I32 cie1000SysutilConfigTemperatureMonitorHysteresis	1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.5	Integer32	read-write	The value of hysteresis for temperature check.
cie1000SysutilConfigTemperatureMonitorInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.4			A collection of objects.
I32 cie1000SysutilConfigTemperatureMonitorLowThreshold	1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.2	Integer32	read-write	The low threshold of temperature monior.
CIE cie1000SysutilConfigTemperatureMonitorSensorId	1.3.6.1.4.1.9.9.832.1.24.1.2.3.1.1	CIE1000SysutilTemperatureMonitorSensorType	accessible-for-notify	The identification of sensor for tempeature monitor.
cie1000SysutilConfigTemperatureMonitorTable	1.3.6.1.4.1.9.9.832.1.24.1.2.3		not-accessible	Table of temperature monitor config.
cie1000SysutilControl	1.3.6.1.4.1.9.9.832.1.24.1.4
cie1000SysutilControlRebootEntry	1.3.6.1.4.1.9.9.832.1.24.1.4.1.1		not-accessible	Each switch has a set of parameters
cie1000SysutilControlRebootInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.13			A collection of objects.
I32 cie1000SysutilControlRebootSwitchId	1.3.6.1.4.1.9.9.832.1.24.1.4.1.1.1	Integer32	accessible-for-notify	The identification of switch.
cie1000SysutilControlRebootTable	1.3.6.1.4.1.9.9.832.1.24.1.4.1		not-accessible	This is a table to reboot a swicth
CIE cie1000SysutilControlRebootType	1.3.6.1.4.1.9.9.832.1.24.1.4.1.1.2	CIE1000SysutilRebootType	read-write	Type of reboot. noReboot(0) does not reboot. coldReboot(1) is to do cold reboot. warmReboot(2) is to do warm reboot, but this is optional. The OID of vtssSysutilCapabilitiesWarmRebootSupported tells if warm reboot is supported or not. factoryReset (3) is to remove all configuration and return to factory settings.
CIE cie1000SysutilControlSystemLedClearStatus	1.3.6.1.4.1.9.9.832.1.24.1.4.2.1.2	CIE1000SysutilSystemLedClearType	read-write	Type of system LED status clearing.all(0) is used to clear all error status of the system LED and back to normal indication. fatal(1) is used to clear fatal error status of the system LED. software(2) is used to clear generic software error status of the system LED. post(3) is used to clear POST(Power On Self Test) error status of the system LED. ztp(4) is used to clear ZTP(Zero Touch Provisioning) error status of the system LED. stackFwChk(5) is used to clear stack firmware version check error status of the system LED.
cie1000SysutilControlSystemLedEntry	1.3.6.1.4.1.9.9.832.1.24.1.4.2.1		not-accessible	Each switch has a set of parameters
cie1000SysutilControlSystemLedInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.14			A collection of objects.
I32 cie1000SysutilControlSystemLedSwitchId	1.3.6.1.4.1.9.9.832.1.24.1.4.2.1.1	Integer32	accessible-for-notify	The identification of switch.
cie1000SysutilControlSystemLedTable	1.3.6.1.4.1.9.9.832.1.24.1.4.2		not-accessible	This is a table to clear the system LED error status
cie1000SysutilMib	1.3.6.1.4.1.9.9.832.1.24			This is a private version of SysUtil
cie1000SysutilMibCompliance	1.3.6.1.4.1.9.9.832.1.24.2.1.1			The compliance statement for the implementation.
cie1000SysutilMibCompliances	1.3.6.1.4.1.9.9.832.1.24.2.1
cie1000SysutilMibConformance	1.3.6.1.4.1.9.9.832.1.24.2
cie1000SysutilMibGroups	1.3.6.1.4.1.9.9.832.1.24.2.2
cie1000SysutilMibObjects	1.3.6.1.4.1.9.9.832.1.24.1
cie1000SysutilStatus	1.3.6.1.4.1.9.9.832.1.24.1.3
cie1000SysutilStatusBoardInfo	1.3.6.1.4.1.9.9.832.1.24.1.3.5
U32 cie1000SysutilStatusBoardInfoBoardID	1.3.6.1.4.1.9.9.832.1.24.1.3.5.2	Unsigned32	read-only	Board ID
MAC cie1000SysutilStatusBoardInfoBoardMacAddress	1.3.6.1.4.1.9.9.832.1.24.1.3.5.1	MacAddress	read-only	Board Mac Address
STR cie1000SysutilStatusBoardInfoBoardSerial	1.3.6.1.4.1.9.9.832.1.24.1.3.5.3	CIE1000DisplayString	read-only	Board ID
STR cie1000SysutilStatusBoardInfoBoardType	1.3.6.1.4.1.9.9.832.1.24.1.3.5.4	CIE1000DisplayString	read-only	Board ID
STR cie1000SysutilStatusBoardInfoCipSerial	1.3.6.1.4.1.9.9.832.1.24.1.3.5.5	CIE1000DisplayString	read-only	Board CIP serial number
cie1000SysutilStatusBoardInfoInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.9			A collection of objects.
cie1000SysutilStatusCpuLoad	1.3.6.1.4.1.9.9.832.1.24.1.3.1
U32 cie1000SysutilStatusCpuLoadAverage100msec	1.3.6.1.4.1.9.9.832.1.24.1.3.1.1	Unsigned32	read-only	Average CPU load (%) in 100 milli-seconds.
U32 cie1000SysutilStatusCpuLoadAverage10sec	1.3.6.1.4.1.9.9.832.1.24.1.3.1.3	Unsigned32	read-only	Average CPU load (%) in 10 seconds.
U32 cie1000SysutilStatusCpuLoadAverage1sec	1.3.6.1.4.1.9.9.832.1.24.1.3.1.2	Unsigned32	read-only	Average CPU load (%) in 1 second.
cie1000SysutilStatusCpuLoadInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.5			A collection of objects.
cie1000SysutilStatusLedStatus	1.3.6.1.4.1.9.9.832.1.24.1.3.7
STR cie1000SysutilStatusLedStatusPortDescription	1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1.4	CIE1000DisplayString	read-only	The description of system LED status.
cie1000SysutilStatusLedStatusPortEntry	1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1		not-accessible	Port interface
NUM cie1000SysutilStatusLedStatusPortIfIndex	1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
cie1000SysutilStatusLedStatusPortInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.12			A collection of objects.
CIE cie1000SysutilStatusLedStatusPortLedColor	1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1.2	CIE1000SysutilLedColor	read-only	Color of LED. off(0) - The led is off, green(1) - The led is green, red(2) - The led is red, amber(3) - The led is amber, green_red(4) - The led is bi-color greed red, green_amber(5) - The led is bi-color green amber.
CIE cie1000SysutilStatusLedStatusPortLedMode	1.3.6.1.4.1.9.9.832.1.24.1.3.7.2.1.3	CIE1000SysutilLedMode	read-only	Type of LED mode.initial(0) Initial state. solid(1) LED is solid on.off(2) LED is turned off.blinking(3) LED is blinking.alternative(4) LED is in alternative mode.
cie1000SysutilStatusLedStatusPortTable	1.3.6.1.4.1.9.9.832.1.24.1.3.7.2		not-accessible	The table is the list of port interface LED nodes. The index is the port interface
STR cie1000SysutilStatusLedStatusSystemDescription	1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1.4	CIE1000DisplayString	read-only	The description of system LED status.
cie1000SysutilStatusLedStatusSystemEntry	1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1		not-accessible	An index is a name e.g. alm
cie1000SysutilStatusLedStatusSystemInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.11			A collection of objects.
CIE cie1000SysutilStatusLedStatusSystemLedColor	1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1.2	CIE1000SysutilLedColor	read-only	Color of LED. off(0) - The led is off, green(1) - The led is green, red(2) - The led is red, amber(3) - The led is amber, green_red(4) - The led is bi-color greed red, green_amber(5) - The led is bi-color green amber.
CIE cie1000SysutilStatusLedStatusSystemLedId	1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1.1	CIE1000SysutilLedNameIndex	accessible-for-notify	The identification of the system LED.
CIE cie1000SysutilStatusLedStatusSystemLedMode	1.3.6.1.4.1.9.9.832.1.24.1.3.7.1.1.3	CIE1000SysutilLedMode	read-only	Type of LED mode.initial(0) Initial state. solid(1) LED is solid on.off(2) LED is turned off.blinking(3) LED is blinking.alternative(4) LED is in alternative mode.
cie1000SysutilStatusLedStatusSystemTable	1.3.6.1.4.1.9.9.832.1.24.1.3.7.1		not-accessible	The table is the list of LED nodes. The index is the name of the LED node
STR cie1000SysutilStatusPowerSupplyDescription	1.3.6.1.4.1.9.9.832.1.24.1.3.2.1.4	CIE1000DisplayString	read-only	The description of power supply.
cie1000SysutilStatusPowerSupplyEntry	1.3.6.1.4.1.9.9.832.1.24.1.3.2.1		not-accessible	Each row contains the power supply status.
cie1000SysutilStatusPowerSupplyInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.6			A collection of objects.
I32 cie1000SysutilStatusPowerSupplyPsuId	1.3.6.1.4.1.9.9.832.1.24.1.3.2.1.2	Integer32	accessible-for-notify	The identification of power supply.
CIE cie1000SysutilStatusPowerSupplyState	1.3.6.1.4.1.9.9.832.1.24.1.3.2.1.3	CIE1000SysutilPowerSupplyStateType	read-only	The state of power supply.
I32 cie1000SysutilStatusPowerSupplySwitchId	1.3.6.1.4.1.9.9.832.1.24.1.3.2.1.1	Integer32	accessible-for-notify	The identification of switch.
cie1000SysutilStatusPowerSupplyTable	1.3.6.1.4.1.9.9.832.1.24.1.3.2		not-accessible	Table of power supply status.
STR cie1000SysutilStatusSystemLedDescription	1.3.6.1.4.1.9.9.832.1.24.1.3.3.1.2	CIE1000DisplayString	read-only	The description of system LED status.
cie1000SysutilStatusSystemLedEntry	1.3.6.1.4.1.9.9.832.1.24.1.3.3.1		not-accessible	Each row contains the system LED status.
cie1000SysutilStatusSystemLedInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.7			A collection of objects.
I32 cie1000SysutilStatusSystemLedSwitchId	1.3.6.1.4.1.9.9.832.1.24.1.3.3.1.1	Integer32	accessible-for-notify	The identification of switch.
cie1000SysutilStatusSystemLedTable	1.3.6.1.4.1.9.9.832.1.24.1.3.3		not-accessible	Table of system LED status.
cie1000SysutilStatusSystemUptime	1.3.6.1.4.1.9.9.832.1.24.1.3.4
cie1000SysutilStatusSystemUptimeInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.8			A collection of objects.
STR cie1000SysutilStatusSystemUptimeSystemUptime	1.3.6.1.4.1.9.9.832.1.24.1.3.4.1	CIE1000DisplayString	read-only	The time since the DUT is Up.
T/F cie1000SysutilStatusTemperatureMonitorCriticalAlarm	1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.4	TruthValue	read-only	The alarm flag of temperature critical status.
cie1000SysutilStatusTemperatureMonitorEntry	1.3.6.1.4.1.9.9.832.1.24.1.3.6.1		not-accessible	Each row contains the sensor status.
T/F cie1000SysutilStatusTemperatureMonitorHighAlarm	1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.3	TruthValue	read-only	The alarm flag of temperature high status.
cie1000SysutilStatusTemperatureMonitorInfoGroup	1.3.6.1.4.1.9.9.832.1.24.2.2.10			A collection of objects.
T/F cie1000SysutilStatusTemperatureMonitorLowAlarm	1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.2	TruthValue	read-only	The alarm flag of temperature low status.
CIE cie1000SysutilStatusTemperatureMonitorSensorId	1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.1	CIE1000SysutilTemperatureMonitorSensorType	accessible-for-notify	The identification of sensor for tempeature monitor.
cie1000SysutilStatusTemperatureMonitorTable	1.3.6.1.4.1.9.9.832.1.24.1.3.6		not-accessible	Table of temperature monitor status.
I32 cie1000SysutilStatusTemperatureMonitorTemperature	1.3.6.1.4.1.9.9.832.1.24.1.3.6.1.5	Integer32	read-only	Current temperature.

RFC description

Cisco IE1000 private MIB for system utilities including board information, LED status, power supply monitoring, temperature monitoring, and reboot control.

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIE1000-SYSUTIL-MIB

What Is CIE1000-SYSUTIL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description