| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoCommonRolesMIB | 1.3.6.1.4.1.9.9.361 | | | MIB module for managing the common roles between
access methods like Command Line Interface (CLI), SNMP
and XML interfaces.
Every user on a device is associated with a role.
A user role defines access rights afforded to the users
that belog to this role. A role specifies which
commands/operations a user is able to perform on what
information.
SNMP uses VACM (View-based Access Control Model) group
to define access rights. Both SNMPv1/v2c community and
SNMPv3 user have to belong to a group in order to access
information.
CLI uses proprietary mechanisms to define the access
rights. Most of them depend on the underlying operating
system.
Groups created from SNMP are not same as the roles
created from CLI unless they are synchronized. In
addition to this, views make up the roles in VACM where
was some kind of internal rules make the roles in the
CLI. This MIB describes a framework in which a role
defined independent of access methods. It is up to the
the particular access method to convert this
framework information into the native information. For
example, SNMP needs to convert common role framework to
VACM.
Note that this framework could be also used for any
other access methods other than SNMP and CLI.
The framework needs a list of features and list of
operations they can support. Features provide the data
context and are system dependent. Operations are the
actions that can be done on the data. The role are
defined in terms of rules. Rules are essentially access
rights which specify if a certain operation on a feature
is permitted or not.
An extension to this MIB module has been defined in
CISCO-COMMON-ROLES-EXT-MIB to provide support for a
framework which has compound features, i.e., features
defined as group of other features, and also to
provide another option for how a user's access can
be restricted. |
| ciscoCommonRolesNotifications | 1.3.6.1.4.1.9.9.361.0 | | | |
| ciscoCommonRolesMIBObjects | 1.3.6.1.4.1.9.9.361.1 | | | |
| ccrInfo | 1.3.6.1.4.1.9.9.361.1.1 | | | |
| commonRoleFeatureTable | 1.3.6.1.4.1.9.9.361.1.1.1 | | not-accessible | This table lists all the features and the operations
supported by the features on the system. |
| commonRoleFeatureEntry | 1.3.6.1.4.1.9.9.361.1.1.1.1 | | not-accessible | An entry (conceptual row) in the
commonRoleFeatureTable containing information about
features and the operations supported by each of the
features. |
| U32 commonRoleFeatureIndex | 1.3.6.1.4.1.9.9.361.1.1.1.1.1 | Unsigned32 | not-accessible | An arbitrary index for this entry. |
| STR commonRoleFeatureName | 1.3.6.1.4.1.9.9.361.1.1.1.1.2 | SnmpAdminString | read-only | Name of the feature. For example, strings like 'ip',
'snmp-server' and 'vsan' are valid feature names. |
| COM commonRoleFeatureOperation | 1.3.6.1.4.1.9.9.361.1.1.1.1.3 | CommonRoleOperation | read-only | The operation associated with this feature. |
| commonRoleSupportedOperTable | 1.3.6.1.4.1.9.9.361.1.1.2 | | not-accessible | This table lists all the access methods supported on
device and the operations supported by each of the
access methods.
The operations listed in CommonRoleOperation may not
be supported by all the access methods. For example,
suppose that in the future, a new operation 'create' is
added to CommonRoleOperation. CLI may not support it;
but may be supported by XML. So this operation would not
apply to CLI. This table captures the supported
operations for each of the access methods. |
| commonRoleSupportedOperEntry | 1.3.6.1.4.1.9.9.361.1.1.2.1 | | not-accessible | An entry (conceptual row) in the
commonRoleSupportedOperTable which lists the operations
supported by the local device for a particular access
method. |
| INT commonRoleAccessMethod | 1.3.6.1.4.1.9.9.361.1.1.2.1.1 | INTEGER | not-accessible | Access method supported on this system. |
| BIT commonRoleSupportedOperation | 1.3.6.1.4.1.9.9.361.1.1.2.1.2 | Bits | read-only | Operations supported by the access method.
clear - Clear operation
config - Config/Set operation
debug - Debug operation
show - Show/Get operation
exec - Exec/Set Operation
read - Read operation
readWrite - Read/Write operation
. |
| ccrRoleConfig | 1.3.6.1.4.1.9.9.361.1.2 | | | |
| U32 commonRoleMaxRoles | 1.3.6.1.4.1.9.9.361.1.2.1 | Unsigned32 | read-only | Maximum number of common roles that can be configured
this device. i.e., the maximum number of entries in the
commonRoleTable. |
| commonRoleTable | 1.3.6.1.4.1.9.9.361.1.2.2 | | not-accessible | This table lists all the common roles configured on this
device.Common roles are the user roles which are common
across SNMP and CLI. |
| commonRoleEntry | 1.3.6.1.4.1.9.9.361.1.2.2.1 | | not-accessible | An entry (conceptual row) in the commonRoleTable. |
| STR commonRoleName | 1.3.6.1.4.1.9.9.361.1.2.2.1.1 | SnmpAdminString | not-accessible | Name of the common role. |
| STR commonRoleDescription | 1.3.6.1.4.1.9.9.361.1.2.2.1.2 | SnmpAdminString | read-create | Description of the common role. |
| INT commonRoleScopeRestriction | 1.3.6.1.4.1.9.9.361.1.2.2.1.3 | INTEGER | read-create | This object indicates if there is a scope restriction
for this role.
If the value of this object is 'none', then there no
scope restriction.
If it is 'vsan', the two objects commonRoleScope1 and
commonRoleScope2 provide the list of Virtual Storage
Area Networks (VSANs) which this role can access. The
object commonRoleScope1 provides list of VSANs from 0
through 2047 and commonRoleScope2 provides from 2048
through 4095. Each octet within the value of the the two
objects specifies a set of eight VSANs. The first octet
specifies VSANs 0 through 7 for commonRoleScope1 and
VSANs 2048 through 2054 for commonRoleScope2. Similarly,
the second octet specifies VSANs 8 through 15 and VSANs
2055 through 2062 for commonRoleScope2, etc. Within each
octet, the most significant bit represents the lowest
numbered VSAN, and the least significant bit represents
the highest numbered VSAN. Thus, each VSAN, is
represented by a single bit within the value of this
object. A role can access a VSAN if and only if that bit
has a value of '1'. If these objects have a value which
are less than 256 bytes long, then the VSANs which are
not represented are not considered to be in these list.
If both the scope objects are zero-length strings, then
this role can not access any VSANs if this object is
`vsan'. The role can access all the VSANs if the this
object is 'none'. Also, both commonRoleScope1 and
commonRoleScope2 are invalid if this object is 'none'.
Other means of restricting the scope of a role can be
defined in the future by extending this object with
additional enumerations. Each such addition will
define the restriction and any parameters it might
have, which might or might not be specified via the
corresponding values of commonRoleScope1 and
commonRoleScope2. |
| OCT commonRoleScope1 | 1.3.6.1.4.1.9.9.361.1.2.2.1.4 | OCTET STRING | read-create | This object provides the scope for the role. The actual
meaning of this object depends the value of
commonRoleScopeRestriction and is defined in that
object. |
| OCT commonRoleScope2 | 1.3.6.1.4.1.9.9.361.1.2.2.1.5 | OCTET STRING | read-create | This object provides the scope for the role. The actual
meaning of this object depends the value of
commonRoleScopeRestriction and is defined in that
object. |
| ROW commonRoleRowStatus | 1.3.6.1.4.1.9.9.361.1.2.2.1.6 | RowStatus | read-create | Status of this role. |
| ccrRuleConfig | 1.3.6.1.4.1.9.9.361.1.3 | | | |
| U32 commonRoleMaxRulesPerRole | 1.3.6.1.4.1.9.9.361.1.3.1 | Unsigned32 | read-only | Maximum number of rules that can be configured for a
role. |
| commonRoleRuleTable | 1.3.6.1.4.1.9.9.361.1.3.2 | | not-accessible | This table lists all the rules configured for roles
defined in the commonRoleTable. Each rule defines a
feature and related access-level which provides either
permit or deny access to the feature information.
Entries in this table are also created/deleted using
commonRoleRuleRowStatus.
A row in this table cannot be made 'active' until a
value is explicitly provided for that row's instances
of following objects :
- commonRoleRuleOperation
Also, the following objects cannot be modified when
'commonRoleRuleRowStatus' is 'active' :
- commonRoleRuleFeatureName
- commonRoleRuleOperation
- commonRoleRuleOperPermitted
To modify the above objects, the entry must be deleted
and re-created with new value of above objects. |
| commonRoleRuleEntry | 1.3.6.1.4.1.9.9.361.1.3.2.1 | | not-accessible | An entry (conceptual row) in the commonRoleRuleTable. |
| U32 commonRoleRuleIndex | 1.3.6.1.4.1.9.9.361.1.3.2.1.1 | Unsigned32 | not-accessible | A sequential number starting from 1, and less than or
equal to commonRoleMaxRulesPerRole, which identifies a
rule. |
| STR commonRoleRuleFeatureName | 1.3.6.1.4.1.9.9.361.1.3.2.1.2 | SnmpAdminString | read-create | Name of the feature.
If this is a zero-length string, then this rule applies
to all the features supported on the system as
enumerated in commonRoleFeatureTable. |
| COM commonRoleRuleOperation | 1.3.6.1.4.1.9.9.361.1.3.2.1.3 | CommonRoleOperation | read-create | The operation permitted for this rule. |
| T/F commonRoleRuleOperPermitted | 1.3.6.1.4.1.9.9.361.1.3.2.1.4 | TruthValue | read-create | This object tells if the operation
`commonRoleRuleOperation' is permitted on the feature
`commonRoleFeatureName'. The operation is permitted if
the value of this object is `true'.
If the value of the object is 'false', the operation is
not permitted. |
| ROW commonRoleRuleRowStatus | 1.3.6.1.4.1.9.9.361.1.3.2.1.5 | RowStatus | read-create | Status of this rule. |
| ciscoCommonRolesMIBConformance | 1.3.6.1.4.1.9.9.361.2 | | | |
| ciscoCommonRolesMIBCompliances | 1.3.6.1.4.1.9.9.361.2.1 | | | |
| ciscoCommonRolesMIBCompliance | 1.3.6.1.4.1.9.9.361.2.1.1 | | | The compliance statement for entities which
implement the CISCO-COMMON-ROLES-MIB (but not
the CISCO-COMMON-ROLES-EXT-MIB). |
| ciscoCommonRolesExtMIBCompliance | 1.3.6.1.4.1.9.9.361.2.1.2 | | | The compliance statement for entities that
implement the CISCO-COMMON-ROLES-EXT-MIB. |
| ciscoCommonRolesMIBGroups | 1.3.6.1.4.1.9.9.361.2.2 | | | |
| ccrmConfigurationGroup | 1.3.6.1.4.1.9.9.361.2.2.1 | | | A collection of objects for Common Roles
configuration. |
| ccrmConfigurationExtGroup | 1.3.6.1.4.1.9.9.361.2.2.2 | | | A collection of objects for Common Roles configuration
that need to be implemented by a device when the device
implements the CISCO-COMMON-ROLES-EXT-MIB. |
