| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoIpSlaAutoMIB | 1.3.6.1.4.1.9.9.633 | | | This module defines the MIB for IP SLA Automation. IP SLA
Automation consists of the following:
1. Use of grouping - Group is an aggregation of operations
sharing the same type, for example UDP jitter type, with
common characteristics like frequency, interval etc.
Groups are formed by policies dictated either per customer,
or by service level or any other requirements. So, for
example, there could be separate groups for customers named
Customer A, Customer B etc, or service levels named
Gold-service, Silver-service etc. A single group will contain
one and only one IP SLA operation definition or reference a
single template.
2. Use of templates - It has been observed that operations can be
configured quickly if the variants such as IP address and
ports can be configured separately and then combined with a
template consisting of invariants. This allows for re-use of
the invariant template with various combinations of destination
addresses and ports, the benefits for which are multiplied when
considering groupings.
3. Auto operations - With this feature the software will try to
automatically kickstart operations by making intelligent
assumptions. For example, if no specific operation is referenced
by the group configuration then an ICMP jitter operation is
assumed by default. |
| ciscoIpSlaAutoMIBNotifs | 1.3.6.1.4.1.9.9.633.0 | | | |
| ciscoIpSlaAutoMIBObjects | 1.3.6.1.4.1.9.9.633.1 | | | |
| cipslaAutoGroupTable | 1.3.6.1.4.1.9.9.633.1.1 | | not-accessible | A table that contains IP SLA auto measure group definitions. |
| cipslaAutoGroupEntry | 1.3.6.1.4.1.9.9.633.1.1.1 | | not-accessible | An entry containing the configurations for a particular
auto measure group. |
| STR cipslaAutoGroupName | 1.3.6.1.4.1.9.9.633.1.1.1.1 | SnmpAdminString | not-accessible | A group name which is used by a management application
to identify the group. |
| STR cipslaAutoGroupDescription | 1.3.6.1.4.1.9.9.633.1.1.1.2 | SnmpAdminString | read-create | This field is used to provide description for the group. |
| STR cipslaAutoGroupDestinationName | 1.3.6.1.4.1.9.9.633.1.1.1.3 | SnmpAdminString | read-create | This object refers to the cipslaAutoGroupDestName
in cipslaAutoGroupDestTable. If the name entered
is not present in cipslaAutoGroupDestTable, then when
group is scheduled, no ip sla operations will be created. |
| INE cipslaAutoGroupADDestPort | 1.3.6.1.4.1.9.9.633.1.1.1.4 | InetPortNumber | read-create | This object represents the destination port number
for auto discovery use. |
| STR cipslaAutoGroupOperTemplateName | 1.3.6.1.4.1.9.9.633.1.1.1.5 | SnmpAdminString | read-create | A string which is used by a management application to
identify the template which is associated with the group.
Depends on cipslaAutoGroupOperType, this object refers to
cipslaIcmpEchoTmplName in cipslaIcmpEchoTmplTable, or
cipslaUdpEchoTmplName in cipslaUdpEchoTmplTable, or
cipslaTcpConnTmplName in cipslaTcpConnTmplTable, or
cipslaIcmpJitterTmplName in cipslaIcmpJitterTmplTable, or
ciscoIpSlaUdpJitterTmplName in ciscoIpSlaUdpJitterTmplTable. |
| STR cipslaAutoGroupSchedulerId | 1.3.6.1.4.1.9.9.633.1.1.1.6 | SnmpAdminString | read-create | This object refers to the cipslaAutoGroupSchedId in
cipslaAutoGroupSchedTable, and is used to schedule
this group. |
| T/F cipslaAutoGroupQoSEnable | 1.3.6.1.4.1.9.9.633.1.1.1.7 | TruthValue | read-create | When this object is set to true, QoS is enabled for this
group and this group is linked to policy map. The
restriction is that after QoS is enabled, it can not be
disabled for this group. |
| IPS cipslaAutoGroupOperType | 1.3.6.1.4.1.9.9.633.1.1.1.8 | IpSlaOperType | read-create | This object specifies the type of IP SLA operation.
When operation type is not ICMP jitter, then
cipslaAutoGroupOperTemplateName must be specified. |
| T/F cipslaAutoGroupDestIPADEnable | 1.3.6.1.4.1.9.9.633.1.1.1.9 | TruthValue | read-create | When this object is set to true, destination IP address
is populated through auto-discovery. |
| U32 cipslaAutoGroupADMeasureRetry | 1.3.6.1.4.1.9.9.633.1.1.1.10 | Unsigned32 | read-create | This object specifies number of measurement retries to
be attempted for the discovered end point after the
connection to the end point is broken. If there is no
re-registration message received, the end point will be
in inactive state.
When the value of cipslaAutoGroupDestIPADEnable is
'false', the value of this object has no effect. |
| U32 cipslaAutoGroupADDestIPAgeout | 1.3.6.1.4.1.9.9.633.1.1.1.11 | Unsigned32 | read-create | This object represents the ageout time for the discovered
end point. If the end point becomes inactive for the period
of ageout time, the end point will be removed from the
discovered end point list.
When the value of cipslaAutoGroupDestIPADEnable is
'false', the value of this object has no effect. |
| STO cipslaAutoGroupStorageType | 1.3.6.1.4.1.9.9.633.1.1.1.12 | StorageType | read-create | The storage type of this conceptual row. |
| ROW cipslaAutoGroupRowStatus | 1.3.6.1.4.1.9.9.633.1.1.1.13 | RowStatus | read-create | The status of the conceptual group control row.
When the status is active, the other writable objects
may be modified unless the scheduler with name
specified by cipslaAutoGroupSchedulerId is scheduled. |
| cipslaAutoGroupDestTable | 1.3.6.1.4.1.9.9.633.1.2 | | not-accessible | A table contains the list of destination IP
addresses and ports associated to the auto measure
group destination name. |
| cipslaAutoGroupDestEntry | 1.3.6.1.4.1.9.9.633.1.2.1 | | not-accessible | An entry containing the destination IP addresses
and port configurations associated to auto measure
group destination name. |
| STR cipslaAutoGroupDestName | 1.3.6.1.4.1.9.9.633.1.2.1.1 | SnmpAdminString | not-accessible | This is the name for an auto measure group destination. |
| IPt cipslaAutoGroupDestIpAddrType | 1.3.6.1.4.1.9.9.633.1.2.1.2 | InetAddressType | not-accessible | The type of the internet address of a destination
for an auto measure group. |
| IP cipslaAutoGroupDestIpAddr | 1.3.6.1.4.1.9.9.633.1.2.1.3 | InetAddress | not-accessible | The internet address of a destination for an auto
measure group. The type of this address is determined
by the value of cipslaAutoGroupDestIpAddrType. |
| INE cipslaAutoGroupDestPort | 1.3.6.1.4.1.9.9.633.1.2.1.4 | InetPortNumber | not-accessible | This object represents the destination port number.
For ICMP echo and ICMP jitter, the suggested value is
'0'. |
| STO cipslaAutoGroupDestStorageType | 1.3.6.1.4.1.9.9.633.1.2.1.5 | StorageType | read-create | The storage type of this conceptual row.
By default the entry will be saved into non-volatile
memory. |
| ROW cipslaAutoGroupDestRowStatus | 1.3.6.1.4.1.9.9.633.1.2.1.6 | RowStatus | read-create | The status of the conceptual destination table control row.
No other objects in this row need to be set before this object
can become active.
During 'destroy', when cipslaAutoGroupDestIpAddr is specified
as '0.0.0.0' and cipslaAutoGroupDestPort is specified as '0',
then all the rows with same cipslaAutoGroupDestName will be
deleted. |
| cipslaReactTable | 1.3.6.1.4.1.9.9.633.1.3 | | not-accessible | A table that contains reaction configurations for templates.
Each conceptual row in cipslaReactTable corresponds
to a reaction configured for one template.
Each template can have multiple reactions and hence there can be
multiple rows for a particular template. Different template
types can have different reactions. The reaction type is
specified as cipslaReactVar based upon template type as some
reaction types are applicable just for specific template types. |
| cipslaReactEntry | 1.3.6.1.4.1.9.9.633.1.3.1 | | not-accessible | A base list of objects that define a conceptual reaction
configuration control row. |
| U32 cipslaReactConfigIndex | 1.3.6.1.4.1.9.9.633.1.3.1.1 | Unsigned32 | not-accessible | This object along with cipslaAutoGroupOperType and
cipslaAutoGroupOperTemplateName identifies
a particular reaction-configuration for one IP SLA
template.
This number is persistent across reboots. |
| IPS cipslaReactVar | 1.3.6.1.4.1.9.9.633.1.3.1.2 | IpSlaReactVar | read-create | This object specifies the type of reaction configured for an
IP SLA template. Default value is 'rtt' for ICMP echo, UDP echo
and TCP connect. Default value is 'jitterAvg' for UDP jitter and
ICMP jitter.
The reaction types 'rtt', 'timeout', 'connectionLoss' and
'verifyError' can be configured for all template types.
The reaction types 'jitterSDAvg', 'jitterDSAvg', 'jitterAvg',
'packetLateArrival', 'packetOutOfSequence',
'maxOfPositiveSD', 'maxOfNegativeSD', 'maxOfPositiveDS'
'maxOfNegativeDS', 'mos' and 'icpif' can be configured for
UDP jitter and ICMP jitter types only.
The reaction types 'packetLossDS', 'packetLossSD' and
'packetMIA' can be configured for UDP jitter type only.
The reaction types 'successivePacketLoss', 'maxOfLatencyDS',
'maxOfLatencySD', 'latencyDSAvg', 'latencySDAvg' and
'packetLoss' can be configured for ICMP jitter type only. |
| INT cipslaReactThresholdType | 1.3.6.1.4.1.9.9.633.1.3.1.3 | INTEGER | read-create | This object specifies the conditions under which
a notification ( trap ) is sent. The rttMonReactOccurred
object defined in rttMonReactTable in CISCO-RTTMON-MIB will
change accordingly:
never(1) - rttMonReactOccurred is never set
immediate(2) - rttMonReactOccurred is set to 'true' when the
value of parameter for which reaction is
configured ( e.g rtt, jitterAvg, packetLossSD,
mos etc ) violates the threshold.
Conversely, rttMonReactOccurred is set to 'false'
when the parameter ( e.g rtt, jitterAvg,
packetLossSD, mos etc ) is below the threshold
limits.
consecutive(3) - rttMonReactOccurred is set to true when the value
of parameter for which reaction is configured
( e.g rtt, jitterAvg, packetLossSD, mos etc )
violates the threshold for configured consecutive
times.
Conversely, rttMonReactOccurred is set to false
when the value of parameter ( e.g rtt, jitterAvg
packetLossSD, mos etc ) is below the threshold
limits for the same number of consecutive
operations.
xOfy(4) - rttMonReactOccurred is set to true when x
( as specified by cipslaReactThresholdCountX )
out of the last y ( as specified by
cipslaReacthresholdCountY ) times the value of
parameter for which the reaction is configured
( e.g rtt, jitterAvg, packetLossSD, mos etc )
violates the threshold.
Conversely, it is set to false when x, out of the
last y times the value of parameter
( e.g rtt, jitterAvg, packetLossSD, mos ) is
below the threshold limits.
NOTE: If x > y, this will never
generate a reaction.
average(5) - rttMonReactOccurred is set to true when the
average ( cipslaReactThresholdCountX times )
value of parameter for which reaction is
configured ( e.g rtt, jitterAvg, packetLossSD,
mos etc ) violates the threshold condition.
Conversely, it is set to false when the
average value of parameter ( e.g rtt, jitterAvg,
packetLossSD, mos etc ) is below the threshold
limits.
If this value is changed by a management station,
rttMonReactOccurred is set to false, but
no reaction is generated if the prior value of
rttMonReactOccurred was true. |
| INT cipslaReactActionType | 1.3.6.1.4.1.9.9.633.1.3.1.4 | INTEGER | read-create | Specifies what type, if any, of reaction to
generate if one of the watched
(reaction-configuration ) conditions is satisfied:
none(1) - no reaction is generated
notificationOnly(2) - a notification is generated |
| U32 cipslaReactThresholdRising | 1.3.6.1.4.1.9.9.633.1.3.1.5 | Unsigned32 | read-create | This object defines the higher threshold limit.
If the value ( e.g rtt, jitterAvg, packetLossSD etc ) rises
above this limit and if the condition specified in
cipslaReactThresholdType is satisfied, a notification is
generated.
Default value of cipslaReactThresholdRising for
'rtt' is 5000
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' 100.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'mos' is 500.
'icpif' is 93.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'successivePacketLoss' is 1000.
'maxOfLatencyDS' is 5000.
'maxOfLatencySD' is 5000.
'latencyDSAvg' is 5000.
'latencySDAvg' is 5000.
'packetLoss' is 10000.
This object is not applicable if the cipslaReactVar is
'timeout', 'connectionLoss' or 'verifyError'. For 'timeout',
'connectionLoss' and 'verifyError' default value of
cipslaReactThresholdRising will be 0. |
| U32 cipslaReactThresholdFalling | 1.3.6.1.4.1.9.9.633.1.3.1.6 | Unsigned32 | read-create | This object defines a lower threshold limit. If the
value ( e.g rtt, jitterAvg, packetLossSD etc ) falls
below this limit and if the condition specified in
cipslaReactThresholdType is satisfied, a notification
is generated. This object value can not bigger than
cipslaReactThresholdRising value.
Default value of cipslaReactThresholdFalling
'rtt' is 3000
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' 100.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'mos' is 500.
'icpif' is 93.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'successivePacketLoss' is 1000.
'maxOfLatencyDS' is 3000.
'maxOfLatencySD' is 3000.
'latencyDSAvg' is 3000.
'latencySDAvg' is 3000.
'packetLoss' is 10000.
This object is not applicable if the cipslaReactVar is
'timeout', 'connectionLoss' or 'verifyError'. For 'timeout',
'connectionLoss' and 'verifyError', default value of
cipslaReactThresholdFalling will be 0. |
| U32 cipslaReactThresholdCountX | 1.3.6.1.4.1.9.9.633.1.3.1.7 | Unsigned32 | read-create | If cipslaReactThresholdType value is 'xOfy', this object
defines the 'x' value.
If cipslaReactThresholdType value is 'consecutive'
this object defines the number of consecutive occurrences
that needs threshold violation before setting
cipslaReactOccurred as true.
If cipslaReactThresholdType value is 'average' this object
defines the number of samples that needs be considered for
calculating average.
This object has no meaning if cipslaReactThresholdType has
value of 'never' and 'immediate'. |
| U32 cipslaReactThresholdCountY | 1.3.6.1.4.1.9.9.633.1.3.1.8 | Unsigned32 | read-create | This object defines the 'y' value of the xOfy condition
if cipslaReactThresholdType is 'xOfy'. The default for the
'y' value is 5.
For other values of cipslaReactThresholdType, this object
is not applicable. |
| STO cipslaReactStorageType | 1.3.6.1.4.1.9.9.633.1.3.1.9 | StorageType | read-create | The storage type of this conceptual row.
By default the entry will be saved into non-volatile
memory. |
| ROW cipslaReactRowStatus | 1.3.6.1.4.1.9.9.633.1.3.1.10 | RowStatus | read-create | This objects indicates the status of the conceptual
Reaction Control Row.
When this object moves to active state, the conceptual row
is monitored and notifications are generated when threshold
violation takes place.
In order for this object to become active cipslaReactVar must
be defined. All other objects assume default values. When the
status is active, the following objects in that row can be
modified.
cipslaReactThresholdType,
cipslaReactActionType,
cipslaReactThresholdRising,
cipslaReactThresholdFalling,
cipslaReactThresholdCountX,
cipslaReactThresholdCountY,
cipslaReactStorageType
This object can be set to 'destroy' from any value at any time.
When this object is set to 'destroy' no reaction configuration
would exist. The reaction configuration for the template is
removed. |
| cipslaAutoGroupSchedTable | 1.3.6.1.4.1.9.9.633.1.4 | | not-accessible | A table of group scheduling definitions. |
| cipslaAutoGroupSchedEntry | 1.3.6.1.4.1.9.9.633.1.4.1 | | not-accessible | A list of objects that define specific configuration for
group scheduling. |
| STR cipslaAutoGroupSchedId | 1.3.6.1.4.1.9.9.633.1.4.1.1 | SnmpAdminString | not-accessible | This string uniquely identifies a row in the
cipslaAutoGroupSchedTable. |
| U32 cipslaAutoGroupSchedPeriod | 1.3.6.1.4.1.9.9.633.1.4.1.2 | Unsigned32 | read-create | Specifies the time duration between initiating two
IP SLA operations generated via the auto measure group. |
| U32 cipslaAutoGroupSchedInterval | 1.3.6.1.4.1.9.9.633.1.4.1.3 | Unsigned32 | read-create | Specifies the duration between initiating each RTT
operation for one IP SLA operation generated via the auto
measure group.
The value of this object is only effective when both
cipslaAutoGroupSchedMaxInterval and
cipslaAutoGroupSchedMinInterval have zero values. |
| U32 cipslaAutoGroupSchedLife | 1.3.6.1.4.1.9.9.633.1.4.1.4 | Unsigned32 | read-create | This object specifies the life of all the operations that are
getting group scheduled. This value will be placed into
cipslaAutoGroupSchedRttLife object when this conceptual control
row becomes 'active'.
The value 2147483647 has a special meaning. When this object is
set to 2147483647, the rttMonCtrlOperRttLife object for all the
operations will not decrement, and thus the life time of the
operation will never end. |
| U32 cipslaAutoGroupSchedAgeout | 1.3.6.1.4.1.9.9.633.1.4.1.5 | Unsigned32 | read-create | This object specifies the ageout value of the operations that are
getting group scheduled. This value will be placed into
rttMonSchedAdminConceptRowAgeout object for each of the
operations in the group when this conceptual control row becomes
'active'.
When this value is set to zero, the operations will never ageout. |
| U32 cipslaAutoGroupSchedMaxInterval | 1.3.6.1.4.1.9.9.633.1.4.1.6 | Unsigned32 | read-create | Specifies the max duration between initiating each RTT
operation for one IP SLA operation in the group. |
| U32 cipslaAutoGroupSchedMinInterval | 1.3.6.1.4.1.9.9.633.1.4.1.7 | Unsigned32 | read-create | Specifies the min duration between initiating each RTT
operation for one IP SLA operation in the group.
The value of this object should be lower than the value of
cipslaAutoGroupSchedMaxInterval. |
| U32 cipslaAutoGroupSchedStartTime | 1.3.6.1.4.1.9.9.633.1.4.1.8 | Unsigned32 | read-create | This is the time in seconds after which the operations of
the associated groups will take transition to active state.
When set to the value other than '1' (pending), then all
objects in this row cannot be modified. |
| STO cipslaAutoGroupSchedStorageType | 1.3.6.1.4.1.9.9.633.1.4.1.9 | StorageType | read-create | The storage type of this conceptual row.
By default the entry will be saved into non-volatile
memory. |
| ROW cipslaAutoGroupSchedRowStatus | 1.3.6.1.4.1.9.9.633.1.4.1.10 | RowStatus | read-create | The status of the conceptual group schedule control row.
When the status is active and the value of
cipslaAutoGroupSchedStartTime is '1', the other writable
objects may be modified.
This object can be set to 'destroy' from any value at any time.
When this object is set to 'destroy' it will stop all the
operations which had been group scheduled by it earlier,
before destroying the group schedule control row. |
| ciscoIpSlaAutoMIBConform | 1.3.6.1.4.1.9.9.633.2 | | | |
| ciscoIpSlaAutoMIBCompliances | 1.3.6.1.4.1.9.9.633.2.1 | | | |
| ciscoIpSlaAutoMIBCompliance | 1.3.6.1.4.1.9.9.633.2.1.1 | | | The compliance statement for IP SLA
(1) Auto Measure Group Table
(2) Destination Table
(3) Reaction Table
(4) Group Schedule Table |
| ciscoIpSlaAutoMIBGroups | 1.3.6.1.4.1.9.9.633.2.2 | | | |
| ciscoIpSlaAutoGroupConfGroup | 1.3.6.1.4.1.9.9.633.2.2.1 | | | A collection of objects related to IP SLA auto meaure group
configuration. |
| ciscoIpSlaAutoGroupDestGroup | 1.3.6.1.4.1.9.9.633.2.2.2 | | | A collection of objects related to IP SLA auto measure
group destination configuration. |
| ciscoIpSlaAutoGroupReactGroup | 1.3.6.1.4.1.9.9.633.2.2.3 | | | A collection of objects related to IP SLA auto measure
reaction configuration. |
| ciscoIpSlaAutoGroupSchedGroup | 1.3.6.1.4.1.9.9.633.2.2.4 | | | A collection of objects related to IP SLA auto measure group
schedule configuration. |
