CISCO-VIRTUAL-SWITCH-MIB

All MIBs › CISCO-VIRTUAL-SWITCH-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2015-03-04

Category: Cisco Devices

Description: Manages Cisco Virtual Switching System (VSS) domain, switch member roles, and virtual switch link (VSL) status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-VIRTUAL-SWITCH-MIB?

CISCO-VIRTUAL-SWITCH-MIB is a Cisco-proprietary MIB for managing the Virtual Switching System (VSS), a technology that combines two physical Cisco chassis into one logical switch, part of Cisco's data-center/campus switching product line. It exposes configuration and status data about the virtual switch domain, the role and capability of each member switch, the Virtual Switch Link (VSL) used to interconnect the core switches, and core-switch priority/preemption settings. This MIB is important for monitoring both hardware and software status: cvsSwitchMode and cvsSwitchConvertingStatus reveal whether a chassis is operating in standalone or virtual-switch mode or mid-conversion, cvsCoreSwitchConfigTable exposes each core switch's role/priority for determining which chassis is active, and VSL change notifications flag a critical link failure between the two chassis that could split the virtual switch. It is a Cisco enterprise MIB that builds on standard Cisco chassis/interface conventions and interacts closely with Cisco's redundancy/high-availability MIBs. It is typically deployed in Cisco Catalyst 6500/6800-series campus and data-center core switches configured in VSS mode for high availability. Network engineers researching cisco virtual switches reference this MIB to monitor Cisco Virtual Switching System (VSS) redundancy state via SNMP.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-VIRTUAL-SWITCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Catalyst 6500/6800-series switches configured for Virtual Switching System (VSS)

Monitoring Examples

An administrator would poll cvsSwitchMode and cvsSwitchConvertingStatus to confirm both chassis are correctly operating as a converted virtual switch rather than stuck mid-conversion. cvsCoreSwitchConfigTable's cvsCoreSwitchPriority and cvsCoreSwitchPreempt would be checked to verify the intended active/standby priority ordering, and a cvsVSLChangeNotifEnable-driven trap firing would immediately flag a Virtual Switch Link failure between the two chassis, a critical event that risks a dual-active split-brain condition if not addressed quickly. cvsSwitchCapability helps confirm both switch members support the same VSS feature set before combining them into one domain.

What Can Be Monitored

virtual switch domain and mode
switch conversion status
core switch role and priority
VSL (Virtual Switch Link) status/change events
switch capability
preemption configuration

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using cvsVSLTxTotalPkts OID:

Select a Cisco Catalyst 6500/6800-series switch (VSS) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cvsVSLTxTotalPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of transmitted packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoVirtualSwitchMIB	1.3.6.1.4.1.9.9.388			This MIB module defines the managed objects that support the virtual switch architecture. The virtual switch concept combines several individual distributed physical switches together to build a single logical management point. The core switches are the control point for a virtual switch, all the traffic is forwarded and distributed in the core switches, including control and data traffic. The core switches are connected through a dedicated ether channel called Virtual Switch Link (VSL) that is used for both control traffic as well as some data traffic to provide the traffic load sharing and switch redundancy between the physical chassis. One or multiple core switches can be supported in the virtual switch architecture, but only one core called 'active core' switch can be active to manage the traffic. The other is called 'standby core' switch as redundancy if there is. The concept of virtual switch is to collect many physical switches chassis together to form a single management unit to simplify the whole network architecture.
ciscoVirtualSwitchMIBConform	1.3.6.1.4.1.9.9.388.2
ciscoVirtualSwitchMIBNotifs	1.3.6.1.4.1.9.9.388.0
ciscoVirtualSwitchMIBObjects	1.3.6.1.4.1.9.9.388.1
cvsChassisEntry	1.3.6.1.4.1.9.9.388.1.2.2.1		not-accessible	An entry describes the present chassis information in the virtual switch architecture.
cvsChassisGroup	1.3.6.1.4.1.9.9.388.2.2.3			The collection of objects which are used to monitor the chassis information in virtual switch architecture.
cvsChassisObjects	1.3.6.1.4.1.9.9.388.1.2
VSS cvsChassisRole	1.3.6.1.4.1.9.9.388.1.2.2.1.2	VSSwitchRole	read-only	This object indicates the role of this chassis in the virtual switch architecture.
VSS cvsChassisSwitchID	1.3.6.1.4.1.9.9.388.1.2.2.1.1	VSSwitchID	read-only	The unique switch ID which is assigned for identifying a chassis in the virtual switch architecture.
cvsChassisTable	1.3.6.1.4.1.9.9.388.1.2.2		not-accessible	This table describes the information of the devices listed in the ENTITY-MIB entPhysicalTable in the virtual switch architecture, whose entPhysicalClass is chassis(3). This table will only be instantiated when the value of cvsSwitchMode is 'multiNode' in the virtual switch architecture.
TIM cvsChassisUpTime	1.3.6.1.4.1.9.9.388.1.2.2.1.3	TimeStamp	read-only	The time (in hundredths of a second) since the chassis device was last re-initialized.
cvsConnectionNotifsGroup	1.3.6.1.4.1.9.9.388.2.2.7			The collection of notifications for the connections in virtual switch environment.
cvsCoreSwitchConfigEntry	1.3.6.1.4.1.9.9.388.1.2.1.1		not-accessible	An entry describes the configuration for a core switch information in the virtual switch architecture.
cvsCoreSwitchConfigTable	1.3.6.1.4.1.9.9.388.1.2.1		not-accessible	This table describes the configuration information for the core switches to select the active or standby core switches in the virtual switch architecture. If cvsDomain or cvsSwitchID objects are configured to 0, this table is not instantiated.
cvsCoreSwitchGroup	1.3.6.1.4.1.9.9.388.2.2.2			The collection of objects which are used to configure the selection information of the active or standby core switches in the virtual switch environment.
VSS cvsCoreSwitchID	1.3.6.1.4.1.9.9.388.1.2.1.1.1	VSSwitchID	not-accessible	The switch number as an identifier for a core switch. If the priority value is the same, the higher switch number has the precedence to be the active core switch.
STR cvsCoreSwitchLocation	1.3.6.1.4.1.9.9.388.1.2.1.1.4	SnmpAdminString	read-write	The configured location for this core switch.
cvsCoreSwitchLocationGroup	1.3.6.1.4.1.9.9.388.2.2.10			The collection of objects which are used to configure the location information of the core switches in the virtual switch environment.
T/F cvsCoreSwitchPreempt	1.3.6.1.4.1.9.9.388.1.2.1.1.3	TruthValue	read-write	The configured preemption information for this core switch. This configuration will enable or disable the preemption of choosing the active core with higher priority.
U32 cvsCoreSwitchPriority	1.3.6.1.4.1.9.9.388.1.2.1.1.2	Unsigned32	read-write	The configured priority information for this core switch. This priority value will be used to choose active or standby core switch. The core switch with the higher numerical value will be more desirable to be chosen as an active core switch.
U32 cvsDomain	1.3.6.1.4.1.9.9.388.1.1.1	Unsigned32	read-write	The virtual switch domain identifier to recognize a virtual switch domain. Only Switches with the same domain number can be in the same virtual switch. 0 means no switch domain configured.
cvsDualActiveDetection	1.3.6.1.4.1.9.9.388.1.5
STR cvsDualActiveDetectionInformation	1.3.6.1.4.1.9.9.388.1.5.2	SnmpAdminString	accessible-for-notify	This object provides information about the dual active notification cvsDualActiveDetectionNotif, i.e., the cause of dual-active, the detection method.
NTF cvsDualActiveDetectionNotif	1.3.6.1.4.1.9.9.388.0.2			The notification will be generated when dual-active is detected.
T/F cvsDualActiveDetectionNotifEnable	1.3.6.1.4.1.9.9.388.1.5.1	TruthValue	read-write	Enable or disable the generation of cvsDualActiveDetectionNotif notification.
cvsDualActiveDetectionNotifsControlGroup	1.3.6.1.4.1.9.9.388.2.2.11			The collection of object(s) which are used to control the notification of dual active detection in the virtual switch environment.
cvsDualActiveDetectionNotifsGroup	1.3.6.1.4.1.9.9.388.2.2.13			The collection of notification(s) for the dual active detection in the virtual switch environment.
cvsDualActiveDetectionNotifsInfoGroup	1.3.6.1.4.1.9.9.388.2.2.12			The collection of object(s) providing variable binding for the dual active detection notification in the virtual switch environment.
cvsGlobalGroup	1.3.6.1.4.1.9.9.388.2.2.1			The collection of objects which are used in the virtual switch or standalone environment.
cvsGlobalObjects	1.3.6.1.4.1.9.9.388.1.1
cvsMIBCompliance	1.3.6.1.4.1.9.9.388.2.1.1			The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB.
cvsMIBCompliances	1.3.6.1.4.1.9.9.388.2.1
cvsMIBComplianceV02	1.3.6.1.4.1.9.9.388.2.1.2			The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB.
cvsMIBComplianceV03	1.3.6.1.4.1.9.9.388.2.1.3			The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB.
cvsMIBComplianceV04	1.3.6.1.4.1.9.9.388.2.1.4			The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB.
cvsMIBGroups	1.3.6.1.4.1.9.9.388.2.2
cvsModuleEntry	1.3.6.1.4.1.9.9.388.1.4.1.1		not-accessible	An entry describes the present physical module information.
cvsModuleGroup	1.3.6.1.4.1.9.9.388.2.2.6			The collection of objects which are used to monitor the physical module information.
cvsModuleObjects	1.3.6.1.4.1.9.9.388.1.4
INT cvsModuleRprWarm	1.3.6.1.4.1.9.9.388.1.4.1.1.4	INTEGER	read-only	The object indicates in-chassis standby supervisor module's redundancy state in a VS environment. 'notApplicable' : the module is not applicable for the rest of states. 'rprWarm' : the module is the in-chassis standby supervisor in rpr warm state running as a DFC (Distributed Forwarding Card). 'cSSO' : the module is the in-chassis hot standby supervisor
U32 cvsModuleSlotNumber	1.3.6.1.4.1.9.9.388.1.4.1.1.3	Unsigned32	read-only	The module slot number for this physical module. If it is in the virtual switch environment, this object returns virtual slot number. If it is in the standalone environment, this object returns physical slot number.
cvsModuleTable	1.3.6.1.4.1.9.9.388.1.4.1		not-accessible	This table describes the information of the physical modules listed in the ENTITY-MIB entPhysicalTable, whose entPhysicalClass is module(9). This table only contains physical linecards, no sub-linecards or port level module entities.
T/F cvsModuleVSLCapable	1.3.6.1.4.1.9.9.388.1.4.1.1.2	TruthValue	read-only	The physical module has the capability to build the VSL connection between 2 core switches in the virtual switch architecture or not. If any physical port in this physical module is with the capability to build the VSL connection, it means this module is VSL capable.
T/F cvsModuleVSSupported	1.3.6.1.4.1.9.9.388.1.4.1.1.1	TruthValue	read-only	The physical module is supported in the virtual switch architecture or not.
VSS cvsSwitchCapability	1.3.6.1.4.1.9.9.388.1.1.3	VSSwitchCapability	read-only	The capability of the switch can be. A physical chassis can be a standalone switch in the normal environment or a switch which is part of the virtual switch architecture.
T/F cvsSwitchConvertingStatus	1.3.6.1.4.1.9.9.388.1.1.5	TruthValue	read-only	Indicating whether the switch is in the process of converting the mode of switch which is specified in the object cvsSwitchMode. true(1) : the switch is in converting the switch mode. false(2) : the switch is not in converting the switch mode.
VSS cvsSwitchID	1.3.6.1.4.1.9.9.388.1.1.2	VSSwitchID	read-write	The unique ID which is assigned to the current switch for identifying this physical chassis as a core switch in the virtual switch architecture. 0 means no switch ID configured.
VSS cvsSwitchMode	1.3.6.1.4.1.9.9.388.1.1.4	VSSwitchMode	read-write	Converting a standalone switch in the regular switch architecture to a switch in the virtual switch architecture. Or converting a switch in the virtual switch architecture to a standalone switch in the regular switch architecture. And the value of this object can only be set to one of mode where the corresponding bits in cvsSwitchCapability is set. To prevent vague switch status, this action will not only change the switch mode, but also reload the device automatically to activate to the new switch mode.
T/F cvsVSLChangeNotifEnable	1.3.6.1.4.1.9.9.388.1.1.6	TruthValue	read-write	Enable or disable the generation of cvsVSLConnectionChangeNotif notification.
NUM cvsVSLChannelIfindex	1.3.6.1.4.1.9.9.388.1.3.1.1.1	InterfaceIndex	not-accessible	The interface index of the VSL channel interface in the core switch to be used for the VSL.
U32 cvsVSLConfiguredPortCount	1.3.6.1.4.1.9.9.388.1.3.1.1.5	Unsigned32	read-only	The number of configured ports for this VSL.
NTF cvsVSLConnectionChangeNotif	1.3.6.1.4.1.9.9.388.0.1			The notification will be generated when the state of the VSL connection is changed.
cvsVSLConnectionEntry	1.3.6.1.4.1.9.9.388.1.3.1.1		not-accessible	The entry contains connections information of the VSL channel interfaces between the core switches.
cvsVSLConnectionGroup	1.3.6.1.4.1.9.9.388.2.2.4			The collection of objects which are used to configure the VSL connection information in standalone or virtual switch environment.
ROW cvsVSLConnectionRowStatus	1.3.6.1.4.1.9.9.388.1.3.1.1.7	RowStatus	read-create	This object is a conceptual row entry that allows creating or removing entries in or from the cvsVSLConnectionTable. Creating an entry in this table means building the VSL connection and removing an entry means to remove the VSL connection.
cvsVSLConnectionTable	1.3.6.1.4.1.9.9.388.1.3.1		not-accessible	This table contains the VSLs (Virtual Switch Link) connection information of the core switches. A bundle link is a collection of two or more physical point-to-point links which are combined to form one logical link. A VSL is a bundle link which spans the core switch to connect to another core switch in the virtual switch.
VSC cvsVSLConnectOperStatus	1.3.6.1.4.1.9.9.388.1.3.1.1.3	VSConnectStatus	read-only	This object indicates the operational status of the VSL connection.
VSS cvsVSLCoreSwitchID	1.3.6.1.4.1.9.9.388.1.3.1.1.2	VSSwitchID	read-create	The switch ID will be used to form the VSL.
DAT cvsVSLLastConnectionStateChange	1.3.6.1.4.1.9.9.388.1.3.1.1.4	DateAndTime	read-only	The last time when the VSL connection was changed from up to down or down to up.
STR cvsVSLLinkPeerInterface	1.3.6.1.4.1.9.9.388.1.3.4.1.1	SnmpAdminString	read-only	This object displays the interface name of the peer interface.
cvsVSLLinkPortEntry	1.3.6.1.4.1.9.9.388.1.3.4.1		not-accessible	The entry contains the information for the configured physical ports of the VSL (Virtual Switch Link) connections in the active core switch and standby switch.
cvsVSLLinkPortGroup	1.3.6.1.4.1.9.9.388.2.2.14			The collection of object(s) which are used to get the VSL Interface Name.
cvsVSLLinkPortTable	1.3.6.1.4.1.9.9.388.1.3.4		not-accessible	This table contains the information for the configured physical ports of the VSL (Virtual Switch Link) connections in the active core switch and standby switch.
cvsVSLObjects	1.3.6.1.4.1.9.9.388.1.3
U32 cvsVSLOperationalPortCount	1.3.6.1.4.1.9.9.388.1.3.1.1.6	Unsigned32	read-only	The number of operational ports for this VSL.
C32 cvsVSLPortRxBadMacAddressPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.10	Counter32	read-only	The number of received packets with bad MAC addresses information for the port.
C32 cvsVSLPortRxBadPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.7	Counter32	read-only	The number of received packets with in invalid states for the port.
C32 cvsVSLPortRxBadSwitchIdPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.11	Counter32	read-only	The number of received packets with bad switch IDs information for the port.
C32 cvsVSLPortRxBidirPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.4	Counter32	read-only	The number of received packets indicating a bidirectional link for the port.
C32 cvsVSLPortRxDomainIdMismatchPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.12	Counter32	read-only	The number of received packets with mismatched domain IDs information for the port.
C32 cvsVSLPortRxFailPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.6	Counter32	read-only	The number of received packets with incorrect data for the port.
C32 cvsVSLPortRxMyInfoAbsentPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.9	Counter32	read-only	The number of received packets without local switch information for the port.
C32 cvsVSLPortRxMyInfoMismatchPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.8	Counter32	read-only	The number of received packets with mismatched local switch information for the port.
C32 cvsVSLPortRxPeerInfoMismatchPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.13	Counter32	read-only	The number of received packets with mismatched peer information for the port.
C32 cvsVSLPortRxUnidirPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.5	Counter32	read-only	The number of received packets that do not indicate a bidirectional link for the port.
cvsVSLPortStatsEntry	1.3.6.1.4.1.9.9.388.1.3.3.1		not-accessible	The entry contains transmitting and receiving statistics information for a configured physical port of the VSL channel interface in the active core switch.
NUM cvsVSLPortStatsIfindex	1.3.6.1.4.1.9.9.388.1.3.3.1.1	InterfaceIndex	not-accessible	The interface index for the configured physical port in the VSL.
cvsVSLPortStatsTable	1.3.6.1.4.1.9.9.388.1.3.3		not-accessible	This table contains the statistics information for the configured physical ports of the VSL (Virtual Switch Link) connection in the active core switch.
C32 cvsVSLPortTxFailPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.3	Counter32	read-only	The number of transmitted packets that had local sending failures, such as out of buffers and other internal errors for the port.
C32 cvsVSLPortTxOkPkts	1.3.6.1.4.1.9.9.388.1.3.3.1.2	Counter32	read-only	The number of transmitted packets without errors for the port.
C64 cvsVSLRxAckEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.32	Counter64	read-only	The number of received ACK EOBC packets.
C64 cvsVSLRxAckPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.18	Counter64	read-only	The number of received ACK packets.
C64 cvsVSLRxChksumErrHCPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.38	Counter64	read-only	The high capacity counter for the number of received received packets with checksum error.
C32 cvsVSLRxChksumErrPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.6	Counter32	read-only	The number of received packets with checksum error.
C64 cvsVSLRxDataEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.31	Counter64	read-only	The number of received ISSU's data EOBC packets.
C64 cvsVSLRxDataPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.17	Counter64	read-only	The number of received ISSU's data packets.
C64 cvsVSLRxErrorHCPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.37	Counter64	read-only	The high capacity counter for the number of received error packets.
C32 cvsVSLRxErrorPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.5	Counter32	read-only	The number of received error packets.
C64 cvsVSLRxLmpEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.27	Counter64	read-only	The number of received LMP EOBC packets.
C64 cvsVSLRxLmpPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.13	Counter64	read-only	The number of received LMP packets.
C64 cvsVSLRxPingEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.29	Counter64	read-only	The number of received VSL PING EOBC packets.
C64 cvsVSLRxPingPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.15	Counter64	read-only	The number of received VSL PING packets.
C64 cvsVSLRxProtoEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.30	Counter64	read-only	The number of received ISSU's protocol EOBC packets.
C64 cvsVSLRxProtoPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.16	Counter64	read-only	The number of received ISSU's protocol packets.
C64 cvsVSLRxRrpEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.28	Counter64	read-only	The number of received RRP EOBC packets.
C64 cvsVSLRxRrpPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.14	Counter64	read-only	The number of received RRP packets.
C64 cvsVSLRxTotalEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.26	Counter64	read-only	The total number of received EOBC packets.
C64 cvsVSLRxTotalHCPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.36	Counter64	read-only	The high capacity counter for the total number of received packets.
C32 cvsVSLRxTotalPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.4	Counter32	read-only	The total number of received packets.
cvsVSLStatisticsExtGroup	1.3.6.1.4.1.9.9.388.2.2.8			The collection of objects which are used to monitor the more detail VSL statistics information in virtual switch architecture.
cvsVSLStatisticsGroup	1.3.6.1.4.1.9.9.388.2.2.5			The collection of objects which are used to monitor the VSL statistics information in virtual switch architecture.
cvsVSLStatsEntry	1.3.6.1.4.1.9.9.388.1.3.2.1		not-accessible	The entry contains transmitting and receiving statistics information of the VSL channel interface in the active core switch.
cvsVSLStatsTable	1.3.6.1.4.1.9.9.388.1.3.2		not-accessible	This table contains the VSL (Virtual Switch Link) connection statistics information between the core switches in the virtual switch architecture. This table will only show the statistics information for the channel interface in the active core switch.
C64 cvsVSLTxAckEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.25	Counter64	read-only	The number of transmitted ACK EOBC packets.
C64 cvsVSLTxAckPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.12	Counter64	read-only	The number of transmitted ACK (Acknowledge) packets.
C64 cvsVSLTxChksumErrHCPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.35	Counter64	read-only	The high capacity counter for the number of transmitted packets with checksum error.
C32 cvsVSLTxChksumErrPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.3	Counter32	read-only	The number of transmitted packets with checksum error.
C64 cvsVSLTxDataEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.24	Counter64	read-only	The number of transmitted ISSU's data EOBC packets.
C64 cvsVSLTxDataPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.11	Counter64	read-only	The number of transmitted data packets, such as ISSU's .
C64 cvsVSLTxErrorHCPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.34	Counter64	read-only	The high capacity counter for the total number of transmitted error packets.
C32 cvsVSLTxErrorPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.2	Counter32	read-only	The number of transmitted error packets.
C64 cvsVSLTxLmpEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.20	Counter64	read-only	The number of transmitted LMP EOBC packets.
C64 cvsVSLTxLmpPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.7	Counter64	read-only	The number of transmitted LMP (Link Maintenance Protocol) packets.
C64 cvsVSLTxPingEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.22	Counter64	read-only	The number of transmitted VSL PING EOBC packets.
C64 cvsVSLTxPingPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.9	Counter64	read-only	The number of transmitted VSL PING packets.
C64 cvsVSLTxProtoEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.23	Counter64	read-only	The number of transmitted ISSU's protocol EOBC packets.
C64 cvsVSLTxProtoPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.10	Counter64	read-only	The number of transmitted protocol packets, such as ISSU's (In Service software Upgrade) protocol.
C64 cvsVSLTxRrpEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.21	Counter64	read-only	The number of transmitted RRP EOBC packets.
C64 cvsVSLTxRrpPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.8	Counter64	read-only	The number of transmitted RRP (Role Resolution Protocol) packets.
C64 cvsVSLTxTotalEobcPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.19	Counter64	read-only	The total number of transmitted EOBC (Ethernet Out-of-Band Channel) packets.
C64 cvsVSLTxTotalHCPkts	1.3.6.1.4.1.9.9.388.1.3.2.1.33	Counter64	read-only	The high capacity counter for the total number of transmitted packets.
C32 cvsVSLTxTotalPktsEx	1.3.6.1.4.1.9.9.388.1.3.2.1.1	Counter32	read-only	The total number of transmitted packets.
cvsVssModuleStandbyGroup	1.3.6.1.4.1.9.9.388.2.2.9			The collection of objects which are used to monitor the module in-chassis standby status information.

RFC description

Manages virtual switch architecture combining multiple physical switches into a single logical management point.

Start monitoring Cisco Catalyst 6500/6800-series switches (VSS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-VIRTUAL-SWITCH-MIB