| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoIpslaVideoProfileMIB | 1.3.6.1.4.1.9.9.766 | | | IP SLA is a capability which utilizes active monitoring for
network performance. It can be used for network
troubleshooting, network assessment and health
monitoring.
This MIB defines the following table as the collection of IP
SLA video traffic profiles that are used when generating
synthetic video traffic by configured IP SLA video operations.
cipslaVideoProfileTable
To run an IP SLA Video Operation, the MIB user should do the
following configurations:
1. Create a new or reuse the existing rttMonEchoAdminEntry with
valid rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress,
rttMonEchoAdminTargetPort, rttMonEchoAdminSourceAddress,
rttMonEchoAdminSourcePort, rttMonEchoAdminVideoTrafficProfile,
rttMonEchoAdminDscp, rttMonEchoAdminReserveDsp,
rttMonEchoAdminInputInterface, and other applicable objects (if
any) in rttMonEchoAdminTable of CISCO-RTTMON-MIB.
2. Schedule the operation to run immediately or at some
scheduled time(s) with optional recurrence(s) if desirable, by
configuring with rttMonCtrlAdminTable of CISCO-RTTMON-MIB.
3. Each occurrance of the scheduled operation generates a report
for the IP SLA VO statistics which are populated and available
in cipslaLatestVideoStatsTable and cipslaVideoAggStatsTable of
CISCO-IPSLA-VIDEO-MIB.
Glossary:
IP SLA - Cisco IOS IP Service Level Agreements
IP SLA operation - Refers to the 'video'
operation supported by IP SLA.
RTT - Round Trip Time |
| ciscoIpslaVideoProfileMIBNotifs | 1.3.6.1.4.1.9.9.766.0 | | | |
| ciscoIpslaVideoProfileMIBObjects | 1.3.6.1.4.1.9.9.766.1 | | | |
| cipslaVideoProfile | 1.3.6.1.4.1.9.9.766.1.1 | | | |
| cipslaVideoProfileTable | 1.3.6.1.4.1.9.9.766.1.1.1 | | not-accessible | This table lists the definitions of IP SLA video profiles
that contain descriptive parameters for synthetic video traffic
patterns which can be used when generating synthetic video
packets by IP SLA Video Operation. |
| cipslaVideoProfileEntry | 1.3.6.1.4.1.9.9.766.1.1.1.1 | | not-accessible | A conceptual row in the cipslaVideoProfileTable |
| U32 cipslaVideoProfileID | 1.3.6.1.4.1.9.9.766.1.1.1.1.1 | Unsigned32 | not-accessible | An arbitrary index that uniquely identifies a video profile |
| ROW cipslaVideoProfileRowStatus | 1.3.6.1.4.1.9.9.766.1.1.1.1.2 | RowStatus | read-create | This object is used to create a new row or modify or delete an
existing row in this table. |
| STO cipslaVideoProfileStorageType | 1.3.6.1.4.1.9.9.766.1.1.1.1.3 | StorageType | read-create | This object specifies the storage type for this conceptual row.
The following columnar objects are allowed to be writable
when the storageType of this conceptual row is permanent(4):
cipslaVideoProfileDescription
cipslaVideoProfileEndpointType
cipslaVideoProfileCodec
cipslaVideoProfileVideoContents
cipslaVideoProfileFrameRate
cipslaVideoProfileResolution
cipslaVideoProfileAvgBitrate
cipslaVideoProfileMaxBitrate
cipslaVideoProfileMinBitrate
cipslaVideoProfileBitrateWindowSize
cipslaVideoProfileIframeMaxSize
cipslaVideoProfileIframeRefreshInterval
cipslaVideoProfileRtpAvgSize
cipslaVideoProfileRtpJitterPattern |
| STR cipslaVideoProfileName | 1.3.6.1.4.1.9.9.766.1.1.1.1.4 | SnmpAdminString | read-create | This object specifies the name of an IP SLA video profile. |
| STR cipslaVideoProfileDescription | 1.3.6.1.4.1.9.9.766.1.1.1.1.5 | SnmpAdminString | read-create | This object specifies the detailed description string of this
video profile. |
| INT cipslaVideoProfileEndpointType | 1.3.6.1.4.1.9.9.766.1.1.1.1.6 | INTEGER | read-create | This object specifies the sender endpoint type which determines
the traffic pattern according to the encoder's characteristics
while generating and sending video packets.
custom - Allows flexibile endpoint behavior
cts1k - Cisco Telepresence System CTS-1000
cts3k - Cisco Telepresence System CTS-3000
cp99xx - Cisco CP-9900 series video IP phones
unknown - unknown endpoint type |
| CVC cipslaVideoProfileCodec | 1.3.6.1.4.1.9.9.766.1.1.1.1.7 | CvcVideoProfile | read-create | This object specifies the video codec and codec profile for how
the video contents are encoded in byte streams. |
| INT cipslaVideoProfileVideoContents | 1.3.6.1.4.1.9.9.766.1.1.1.1.8 | INTEGER | read-create | This object specifies the video contents that determine the
amount of information to be encoded by the video sender and thus
have effects on the peak rate and frame size in the video
traffic generation. This gives a high level description of the
traffic patterns, and can be overwritten by the detailed
parameters such as cipslaVideoProfileIframeRefreshInterval.
The supported video contents are as follows.
conferenceRoom - conference room scene
singlePerson - single person in video conferencing
presentation - presentation video
sports - sports activities video
streetView - video scene from street views
other - other scenes |
| U32 cipslaVideoProfileFrameRate | 1.3.6.1.4.1.9.9.766.1.1.1.1.9 | Unsigned32 | read-create | This object specifies the video frame rates in the generated
video traffic, in unit of 'frames per 1K seconds' or fpks. For
example, 30000 means 30 frames per second (fps), and 7500 means
7.5 fps. The maximum frame rate is 120 fps or 120000 fpks. |
| CVC cipslaVideoProfileResolution | 1.3.6.1.4.1.9.9.766.1.1.1.1.10 | CvcVideoResolution | read-create | This object specifies the video frame resolution of the
generated video traffic. |
| U32 cipslaVideoProfileAvgBitrate | 1.3.6.1.4.1.9.9.766.1.1.1.1.11 | Unsigned32 | read-create | This object specifies the average bit rate of a video traffic
pattern in kilo-bits per second. It is used by the sender's
encoder to upper-limit the generated video packets. |
| U32 cipslaVideoProfileMaxBitrate | 1.3.6.1.4.1.9.9.766.1.1.1.1.12 | Unsigned32 | read-create | This object specifies the maximum bit rate or peak rate of the
video traffic that can be generated by the sender's encoder, in
kilo-bits per second.
This value is valid only in the range from the average bit rate
to 10 times the average bit rate, where the average bit rate is
specified in cipslaVideoProfileAvgBitrate object. |
| U32 cipslaVideoProfileMinBitrate | 1.3.6.1.4.1.9.9.766.1.1.1.1.13 | Unsigned32 | read-create | This object specifies the minimum bit rate in kilo-bits per
second, at which the video traffic can be generated even when
the video contents are still.
This value is valid only in the range from 1 to the average bit
rate as specified in cipslaVideoProfileAvgBitrate object. |
| U32 cipslaVideoProfileBitrateWindowSize | 1.3.6.1.4.1.9.9.766.1.1.1.1.14 | Unsigned32 | read-create | This object specifies the rate control window size which is
used by the video encoder to calculate the running average bit
rate.
The smaller the value of this bit rate window size, less bursty
of the traffic; this bitrate control window size is specified
in milliseconds.
Value 0 indicates no bitrate window control. |
| U32 cipslaVideoProfileIframeMaxSize | 1.3.6.1.4.1.9.9.766.1.1.1.1.15 | Unsigned32 | read-create | This object specifies the maximum size of an I-frame that the
video encoder can generate, in kilo-bytes. |
| U32 cipslaVideoProfileIframeRefreshInterval | 1.3.6.1.4.1.9.9.766.1.1.1.1.16 | Unsigned32 | read-create | This object specifies the refresh-rate of video intra-frames,
in seconds.
Value 0 indicates that only the first frame is an intra-frame,
i.e no refresh. |
| U32 cipslaVideoProfileRtpAvgSize | 1.3.6.1.4.1.9.9.766.1.1.1.1.17 | Unsigned32 | read-create | This object specifies the average RTP packet size in generated
video traffic, in bytes. |
| INT cipslaVideoProfileRtpJitterPattern | 1.3.6.1.4.1.9.9.766.1.1.1.1.18 | INTEGER | read-create | This object specifies the output buffering control mechanism of
the video encoder when generating packets.
bursty - send packets all out at once, no buffering
shaped - send packets evenly in a frame interval, with
buffering
other - other patterns |
| ciscoIpslaVideoProfileMIBConform | 1.3.6.1.4.1.9.9.766.2 | | | |
| ciscoIpslaVideoProfileMIBCompliances | 1.3.6.1.4.1.9.9.766.2.1 | | | |
| ciscoIpslaVideoProfileMIBCompliance | 1.3.6.1.4.1.9.9.766.2.1.1 | | | This is the module-compliance for ISR G2 with PVDM3 platforms,
containing object groups and notification groups. |
| ciscoIpslaVideoProfileMIBGroups | 1.3.6.1.4.1.9.9.766.2.2 | | | |
| ciscoIpslaVideoProfileBaseGroup | 1.3.6.1.4.1.9.9.766.2.2.1 | | | The is the base group to include those objects for all
platforms implementations. |
| ciscoIpslaVideoProfileIsrg2Pvdm3Group | 1.3.6.1.4.1.9.9.766.2.2.2 | | | This is the object group to include those objects that are only
applicable to Cisco ISR G2 platforms with PVDM3. |
