CISCO-SDWAN-APP-ROUTE-MIB

All MIBs › CISCO-SDWAN-APP-ROUTE-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2021-01-26

Category: Cisco Devices, MPLS and Traffic Engineering, Quality of Service, Routing Protocols

Description: Monitors Cisco SD-WAN application-aware routing statistics and path quality metrics across WAN overlay tunnels.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-SDWAN-APP-ROUTE-MIB?

CISCO-SDWAN-APP-ROUTE-MIB defines operational data for Cisco SD-WAN's application-aware routing feature, which measures path quality across WAN overlay tunnels to steer application traffic over the best-performing path. It belongs to Cisco's SD-WAN (Viptela-derived) software-defined networking product line. The data it exposes is primarily performance-counter and path-quality data: per-flow statistics keyed by source/destination IP, port, protocol, and remote system/color (tunnel color identifying the WAN transport), including mean packet loss and mean latency. This MIB is squarely about software/network performance-status monitoring, tracking tunnel/path quality metrics that determine whether application-aware routing is steering traffic correctly, rather than classical hardware health like temperature or fan status. It operates within the broader Cisco SD-WAN MIB family and depends on the underlying overlay tunnel/color model defined elsewhere in the SD-WAN control plane. It is deployed on Cisco SD-WAN edge routers at branch and data-center sites using multiple WAN transports. Engineers can download the CISCO-SDWAN-APP-ROUTE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-SDWAN-APP-ROUTE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco SD-WAN edge routers (vEdge/IOS-XE SD-WAN)

Monitoring Examples

An administrator polls appRouteStatisticsTable/appRouteStatisticsEntry, indexed by appRouteStatisticsSrcIp, appRouteStatisticsDstIp, appRouteStatisticsProto, and port fields, to retrieve appRouteStatisticsMeanLoss and appRouteStatisticsMeanLatency for a given tunnel path. Comparing values across appRouteStatisticsLocalColor and appRouteStatisticsRemoteColor reveals which WAN path is best-performing for a given application flow. A spike in appRouteStatisticsMeanLoss or appRouteStatisticsMeanLatency toward a specific appRouteStatisticsRemoteSystemIp signals a degrading WAN path that application-aware routing should route around.

What Can Be Monitored

mean packet loss per path
mean latency per path
per-flow traffic (src/dst IP, port, protocol)
tunnel color/transport used
remote system reachability

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using appRouteStatisticsIntervalAverageLatency OID:

Select a Cisco SD-WAN (Viptela) edge router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type appRouteStatisticsIntervalAverageLatency into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the average latency. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoSdwanAppRouteMIB	1.3.6.1.4.1.9.9.1001			This module defines the data model for Cisco SDWAN application-aware routing operational data
ciscoSdwanAppRouteMIBObjects	1.3.6.1.4.1.9.9.1001.1
appRouteStatisticsTable	1.3.6.1.4.1.9.9.1001.1.2		not-accessible	Statisticst table
appRouteStatisticsEntry	1.3.6.1.4.1.9.9.1001.1.2.1		not-accessible	Statisticst table entry
ADR appRouteStatisticsSrcIp	1.3.6.1.4.1.9.9.1001.1.2.1.1	InetAddressIP	not-accessible	Local TLOC IP address
ADR appRouteStatisticsDstIp	1.3.6.1.4.1.9.9.1001.1.2.1.2	InetAddressIP	not-accessible	Remote TLOC IP address
INT appRouteStatisticsProto	1.3.6.1.4.1.9.9.1001.1.2.1.3	INTEGER	not-accessible	Protocol or encap
UNS appRouteStatisticsSrcPort	1.3.6.1.4.1.9.9.1001.1.2.1.4	UnsignedShort	not-accessible	Local port number
UNS appRouteStatisticsDstPort	1.3.6.1.4.1.9.9.1001.1.2.1.5	UnsignedShort	not-accessible	Remote port number
ADR appRouteStatisticsRemoteSystemIp	1.3.6.1.4.1.9.9.1001.1.2.1.6	InetAddressIP	read-only	Remote system IP address
INT appRouteStatisticsLocalColor	1.3.6.1.4.1.9.9.1001.1.2.1.7	INTEGER	read-only	Local TLOC color
INT appRouteStatisticsRemoteColor	1.3.6.1.4.1.9.9.1001.1.2.1.8	INTEGER	read-only	Remote TLOC color
UNS appRouteStatisticsMeanLoss	1.3.6.1.4.1.9.9.1001.1.2.1.9	UnsignedByte	read-only	Average loss in percentage across all the polling intervals
U32 appRouteStatisticsMeanLatency	1.3.6.1.4.1.9.9.1001.1.2.1.10	Unsigned32	read-only	Average latency across all the polling intervals
U32 appRouteStatisticsMeanJitter	1.3.6.1.4.1.9.9.1001.1.2.1.12	Unsigned32	read-only	Average jitter across all polling intervals
appRouteStatisticsIntervalTable	1.3.6.1.4.1.9.9.1001.1.3		not-accessible	Statistics interval table
appRouteStatisticsIntervalEntry	1.3.6.1.4.1.9.9.1001.1.3.1		not-accessible	Statistics interval table entry
UNS appRouteStatisticsIntervalIndex	1.3.6.1.4.1.9.9.1001.1.3.1.1	UnsignedByte	not-accessible	Polling interval index
I32 appRouteStatisticsIntervalTotalPackets	1.3.6.1.4.1.9.9.1001.1.3.1.2	Integer32	read-only	Total packets sent
I32 appRouteStatisticsIntervalLoss	1.3.6.1.4.1.9.9.1001.1.3.1.3	Integer32	read-only	Packets lost
C64 appRouteStatisticsIntervalAverageLatencyEx	1.3.6.1.4.1.9.9.1001.1.3.1.4	Counter64	read-only	Average latency
C64 appRouteStatisticsIntervalAverageJitter	1.3.6.1.4.1.9.9.1001.1.3.1.5	Counter64	read-only	Average jitter
C64 appRouteStatisticsIntervalTxDataPkts	1.3.6.1.4.1.9.9.1001.1.3.1.6	Counter64	read-only	Data packets transmitted
C64 appRouteStatisticsIntervalRxDataPkts	1.3.6.1.4.1.9.9.1001.1.3.1.7	Counter64	read-only	Data packets received
C64 appRouteStatisticsIntervalIpv6TxDataPkts	1.3.6.1.4.1.9.9.1001.1.3.1.8	Counter64	read-only	IPv6 Data packets transmitted
C64 appRouteStatisticsIntervalIpv6RxDataPkts	1.3.6.1.4.1.9.9.1001.1.3.1.9	Counter64	read-only	IPv6 Data packets received
appRouteSlaClassTable	1.3.6.1.4.1.9.9.1001.1.4		not-accessible	SLA class table
appRouteSlaClassEntry	1.3.6.1.4.1.9.9.1001.1.4.1		not-accessible	SLA class table entry
UNS appRouteSlaClassIndex	1.3.6.1.4.1.9.9.1001.1.4.1.1	UnsignedByte	not-accessible	SLA class index
STR appRouteSlaClassName	1.3.6.1.4.1.9.9.1001.1.4.1.2	String	read-only	Name of the SLA class
UNS appRouteSlaClassLoss	1.3.6.1.4.1.9.9.1001.1.4.1.3	UnsignedByte	read-only	Configured loss, in percentage
U32 appRouteSlaClassLatency	1.3.6.1.4.1.9.9.1001.1.4.1.4	Unsigned32	read-only	Configured latency, in milliseconds
U32 appRouteSlaClassJitter	1.3.6.1.4.1.9.9.1001.1.4.1.5	Unsigned32	read-only	Configured jitter, in milliseconds
ciscoSdwanAppRouteMIBConform	1.3.6.1.4.1.9.9.1001.3
ciscoSdwanAppRouteMIBCompliances	1.3.6.1.4.1.9.9.1001.3.1
ciscoSdwanAppRouteMIBCompliance	1.3.6.1.4.1.9.9.1001.3.1.1			The compliance statement for the SNMP entities that implement the ciscoSdwanAppRouteMIB module.
ciscoSdwanAppRouteMIBGroups	1.3.6.1.4.1.9.9.1001.3.2
cSdwanAppRouteStatisticsGroup	1.3.6.1.4.1.9.9.1001.3.2.1			This is a collection of objects of AppRoute statistics.
cSdwanAppRouteStatisticsIntervalGroup	1.3.6.1.4.1.9.9.1001.3.2.2			This is a collection of objects of AppRoute statistics interval.
cSdwanAppRouteSlaClassGroup	1.3.6.1.4.1.9.9.1001.3.2.3			This is a collection of objects of AppRoute SLA class.

RFC description

Monitors Cisco SD-WAN application-aware routing operational data.

Start monitoring Cisco SD-WAN (Viptela) edge routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-SDWAN-APP-ROUTE-MIB