All MIBs › CISCO-MGX8800-IF-MAPPING-CAPABILITY
Organization: Cisco Systems, Inc.
Last Updated: 2002-08-01
Category: Cisco Devices, Hardware and Environment, Network Interfaces, SNMP Framework
Description: Declares SNMP agent capabilities for interface mapping management on Cisco MGX 8800 WAN switching platforms.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-MGX8800-IF-MAPPING-CAPABILITY?
CISCO-MGX8800-IF-MAPPING-CAPABILITY is an AGENT-CAPABILITIES module, not a data-bearing MIB; it declares which parts of the companion CISCO-MGX8800-IF-MAPPING-MIB are actually implemented by SNMP agents running on Cisco MGX 8800 WAN switching platforms. It distinguishes capability sets for the MGX8850 Release 3.0.00 chassis versus the RPM-XF (Route Processor Module) card, documenting supported interface-mapping groups and compliance statements rather than exposing runtime counters. As a conformance module it has no direct role in monitoring hardware/software status itself; instead it tells a management station which objects in the underlying interface-mapping MIB it can rely on for that platform/release. It depends entirely on the corresponding CISCO-MGX8800-IF-MAPPING-MIB, whose object definitions it constrains. It is used during NMS/agent integration and compliance validation for Cisco MGX 8800 series ATM/WAN switches, not for day-to-day polling. Engineers can download the CISCO-MGX8800-IF-MAPPING-CAPABILITY file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-MGX8800-IF-MAPPING-CAPABILITY. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco MGX 8850 WAN switch
- Cisco RPM-XF module
Monitoring Examples
This is a conformance (AGENT-CAPABILITIES) module and defines no runtime data objects of its own, so there is no monitoring scenario to describe; it only asserts, per Cisco MGX 8850 R3.0.00 or RPM-XF release, which groups of CISCO-MGX8800-IF-MAPPING-MIB are supported.
Imported Objects
From CISCO-SMI
| ciscoAgentCapability | OBJECT-IDENTITY |
From SNMPv2-CONF
| AGENT-CAPABILITIES |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| Unsigned32 |
OIDs
RFC description
Agent capabilities for physical-to-interface mapping on Cisco MGX8850 and RPM-XF modules.
Start monitoring Cisco MGX 8850 WAN switch / RPM-XF module (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.