All MIBs › ADN-MIB
Category: DSL / Broadband Access
Description: Provides core management objects for ADN network devices including system and interface status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ADN-MIB?
ADN-MIB is an Ascom Timeplex (enterprise OID 637, ADN = Advanced Digital Network multiplexer product line) proprietary MIB extending the RFC 1604 Frame Relay Management Signalling/Logical Port groups with additional per-channel accounting and traffic-shaping detail. Its Frame Relay channel table, keyed by circuit, records bandwidth-allocation-table reference, accounting/statistics settings, line type, congestion state, procedure type, VC-trap enable, over-Bc/over-Be counts, inbound/outbound CIR/Bc/Bcs/Be, active call count, delay-sensitivity flag, configured VC type, and PVC maximum/bidirectional-range limits. As a configuration/performance MIB it lets an administrator confirm CIR/burst-size settings and watch congestion state per Frame Relay channel. It is deployed on Ascom Timeplex ADN multiplexer equipment. Engineers can download the ADN-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ADN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Ascom Timeplex ADN multiplexer equipment
Monitoring Examples
An administrator checks adnFrChanCongsState and adnFrChanInCIR to diagnose a congested Frame Relay channel on Ascom Timeplex ADN multiplexer equipment.
What Can Be Monitored
- Frame Relay channel CIR/burst configuration and congestion state
This MIB depends on
Related MIBs
Imported Objects
From ATM-MIB
| atmVclVci | OBJECT-TYPE |
| atmVclVpi | OBJECT-TYPE |
| atmVplVpi | OBJECT-TYPE |
From ATMF-CES
| atmfCESCbrIndex | OBJECT-TYPE |
From FRNETSERV-MIB
| frPVCEndptDLCIIndex | OBJECT-TYPE |
From IF-MIB
| InterfaceIndex | |
| ifAdminStatus | OBJECT-TYPE |
| ifIndex | OBJECT-TYPE |
| ifName | OBJECT-TYPE |
| ifOperStatus | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| enterprises |
From RFC1213-MIB
| PhysAddress |
From RFC1316-MIB
| AutonomousType |
From RFC1406-MIB
| dsx1LineIndex | OBJECT-TYPE |
From RFC1407-MIB
| dsx3LineIndex | OBJECT-TYPE |
From SNMPv2-PARTY-MIB
| contextEntry | OBJECT-TYPE |
| partyIndex | OBJECT-TYPE |
From SNMPv2-SMI
| Integer32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| adn | 1.3.6.1.4.1.637.3 | |||
| adn12Coupler | 1.3.6.1.4.1.637.3.1.2.5.5.3 | |||
| adn3Coupler | 1.3.6.1.4.1.637.3.1.2.5.5.1 | |||
| adn3rdParty | 1.3.6.1.4.1.637.3.1.2.2.8 | |||
| STR adn3rdPartyCardDescr | 1.3.6.1.4.1.637.3.1.5.13.1.1.1 | DisplayString | read-only | A textual string describing the card. Common Name: Description |
| adn3rdPartyCardEntry | 1.3.6.1.4.1.637.3.1.5.13.1.1 | not-accessible | A card entry containing objects that represent the access address and parameters that can be displayed in the NMS. | |
| PHY adn3rdPartyCardLocAddress | 1.3.6.1.4.1.637.3.1.5.13.1.1.3 | PhysAddress | read-only | Address of card. Common Name: Address |
| INT adn3rdPartyCardLocAddrType | 1.3.6.1.4.1.637.3.1.5.13.1.1.2 | INTEGER | read-only | Card's address type. Common Name: Address Type |
| adn3rdPartyCardTable | 1.3.6.1.4.1.637.3.1.5.13.1 | not-accessible | A list of third party card entries and attributes needed by network management. This is an extension to the adnEquipTable for third party card entries. | |
| adn3rdPartyInterface | 1.3.6.1.4.1.637.3.1.2.9 | |||
| adn3rdPartyMIB | 1.3.6.1.4.1.637.3.1.5.13 | |||
| adn8Coupler | 1.3.6.1.4.1.637.3.1.2.5.5.2 | |||
| adnAcj64 | 1.3.6.1.4.1.637.3.1.2.2.9.16 | |||
| adnAcTuj | 1.3.6.1.4.1.637.3.1.2.2.9.13 | |||
| adnAcx | 1.3.6.1.4.1.637.3.1.2.1.8 | |||
| adnAcx8 | 1.3.6.1.4.1.637.3.1.2.2.10.4 | |||
| adnAcxCard | 1.3.6.1.4.1.637.3.1.2.2.10 | |||
| adnAdjhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.26.1 | not-accessible | Each row provides information about a header of a specific learned adjacency table. | |
| IP adnAdjhdrIpAdr | 1.3.6.1.4.1.637.3.1.5.8.27.1.9 | IpAddress | read-only | The IP address of the adjacent node. If the adjacent node does not have IP address then the value is 0.0.0.0 |
| INT adnAdjhdrNum | 1.3.6.1.4.1.637.3.1.5.8.26.1.3 | INTEGER | read-only | Number of adjacent node entries in a learned adjacency table. |
| ADN adnAdjhdrStamp | 1.3.6.1.4.1.637.3.1.5.8.26.1.2 | AdnNodeTimeStamp | read-only | Time-of-day stamp of a learned adjacency table. |
| adnAdjhdrTable | 1.3.6.1.4.1.637.3.1.5.8.26 | not-accessible | Information about the headers of the learned adjacency tables for all types of service. | |
| INT adnAdjhdrVer | 1.3.6.1.4.1.637.3.1.5.8.26.1.1 | INTEGER | read-only | Version number of a learned adjacency table. These numbers start at 1 and continue upwards - allows distinguishing older from newer copies. |
| adnAdjLineEntry | 1.3.6.1.4.1.637.3.1.5.8.28.1 | not-accessible | Each entry (row) in the adnAdjLineTable provides key information about a particular logical line (channel) to the adjacent node. | |
| adnAdjLinehdrTable | 1.3.6.1.4.1.637.3.1.5.8.27 | not-accessible | Refers to the HSS routing services learned adjacency table on the control unit used to track adjacent connections, particularly for purposes of load balancing. Node-to-path table path entries reference the adjacency table. The adjacency header table provides access to the information in the adjacency table entry headers. See the related AdnAjLineTable for individual lines associated with a particular adjacent node header. | |
| adnAdjLineTable | 1.3.6.1.4.1.637.3.1.5.8.28 | not-accessible | Provides access to the line level information in the adjacency table for each adjacent node entry. | |
| NUM adnAdjLocIfIndex | 1.3.6.1.4.1.637.3.1.5.8.28.1.1 | InterfaceIndex | not-accessible | Uniquely identifies a network interface within a node. |
| INT adnAdjMetricCostHigh | 1.3.6.1.4.1.637.3.1.5.8.28.1.4 | INTEGER | read-only | High priority cost metric for this link entry. |
| INT adnAdjMetricCostLow | 1.3.6.1.4.1.637.3.1.5.8.28.1.8 | INTEGER | read-only | Low priority cost metric for this link entry. |
| INT adnAdjMetricCostMid | 1.3.6.1.4.1.637.3.1.5.8.28.1.6 | INTEGER | read-only | Mid priority cost metric for this link entry. |
| ADN adnAdjMetricIDHigh | 1.3.6.1.4.1.637.3.1.5.8.28.1.3 | AdnRoutingMetricType | read-only | High priority cost metric ID for this link entry. |
| ADN adnAdjMetricIDLow | 1.3.6.1.4.1.637.3.1.5.8.28.1.7 | AdnRoutingMetricType | read-only | Low priority cost metric ID for this link entry. |
| ADN adnAdjMetricIDMid | 1.3.6.1.4.1.637.3.1.5.8.28.1.5 | AdnRoutingMetricType | read-only | Mid priority cost metric ID for this link entry. |
| INT adnAdjNodeState | 1.3.6.1.4.1.637.3.1.5.8.27.1.5 | INTEGER | read-only | Identifies a state that governs HSS routing services adjacency formation. |
| INT adnAdjNodetype | 1.3.6.1.4.1.637.3.1.5.8.27.1.2 | INTEGER | read-only | Node type can be TPX or HSS. Commonly used to distinguish interworking characteristics. |
| INT adnAdjNumLines | 1.3.6.1.4.1.637.3.1.5.8.27.1.3 | INTEGER | read-only | Number of available logical lines (channels) in the connection to this adjacent node. |
| INT adnAdjNxtLine | 1.3.6.1.4.1.637.3.1.5.8.27.1.4 | INTEGER | read-only | Specifies the next logical line to be used for routing message traffic; allows HSS routing services to spread the routing message traffic over all logical lines comprising the connection. |
| NUM adnAdjRemIfIndex | 1.3.6.1.4.1.637.3.1.5.8.28.1.2 | InterfaceIndex | read-only | Uniquely identifies a network interface within the remote node. If the remote node is a TPX, this object identifies the T1 interface identifier. |
| INT adnAdjRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.8.27.1.7 | INTEGER | read-only | The area number part of adnAnodeIndex, the routing area number of the node at the remote endpoint. |
| INT adnAdjRemNodeMacNum | 1.3.6.1.4.1.637.3.1.5.8.27.1.6 | INTEGER | read-only | The machine number part of adnAnodeIndex, the routing node ID of the node at the remote endpoint. |
| INT adnAdjRemTpxTci | 1.3.6.1.4.1.637.3.1.5.8.28.1.9 | INTEGER | read-only | This variable provides the value of remote TPX TCI (TPX Channel Indicator) which corresponds to this ifIndex. |
| OCT adnAdjTpxAddr | 1.3.6.1.4.1.637.3.1.5.8.27.1.8 | OCTET STRING | read-only | The adjacent TPX node's x121 Address. If adnAdjNodetype is not TPX the address is 00000.... |
| adnAeiPort | 1.3.6.1.4.1.637.3.1.2.6 | |||
| INT adnAeiPortActiveOrNot | 1.3.6.1.4.1.637.3.1.5.15.4.1.1 | INTEGER | read-only | This indicates the active/standby mode of the port; it applies to all ATM boards. |
| INT adnAeiPortASEStatus | 1.3.6.1.4.1.637.3.1.5.15.23.1.2 | INTEGER | read-only | This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for ASE boards. The bit positions are : 1 : adnAeiPortOOS synchronization fault ATM Electrical Interface 2 : adnAeiPortLOS synchronization fault 8 bit parallel Atm Internal Interface 4 : adnAeiPortNFOF network FIFO overflows 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 256 : adnAeiPortNPE parity errors on payload 512 : adnAeiPortRTA routing data error status 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 error active maintenance cell received 67108864 : adnAeiPortNCRC CRC errors detected on payload field 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error in AEI reception 1073741824: adnAeiPortURC unrouted cells N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0. |
| INT adnAeiPortCEMStatus | 1.3.6.1.4.1.637.3.1.5.15.23.1.31 | INTEGER | read-only | This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for CEM8 boards. The bit positions are : 1 : adnAeiPortOOS out-of-synchronization 4 : adnAeiPortNFOF network FIFO overflows 8 : adnAeiPortIEMRAMP BGIEM chip RAM parity errors 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 256 : adnAeiPortNPE parity errors on payload 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 active maintenance cell received with error indication 131072 : adnAeiPortNSFOF network signalling FIFO overflow 262144 : adnAeiPortNFWF network FIFO write failure 524288 : adnAeiPortSFWF signalling FIFO write failure 1048576 : adnAeiPortNSFRF network signalling FIFO read failure 4194304 : adnAeiPortUSFRF user signalling FIFO read failure 8388608 : adnAeiPortUFWF user FIFO write failure 16777216 : adnAeiPortUSFOF user signalling FIFO overflow 67108864 : adnAeiPortNCRC CRC errors detected on network side 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error on network side 2147483648: adnAeiPortSFIFO load sharing FIFO overflow N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0. |
| INT adnAeiPortCIGStatus | 1.3.6.1.4.1.637.3.1.5.15.23.1.3 | INTEGER | read-only | This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for CIG boards. The bit positions are : 1 : adnAeiPortOOS out-of-synchronization 4 : adnAeiPortNFOF network FIFO overflows 8 : adnAeiPortIEMRAMP BGIEM chip RAM parity errors 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 64 : adnAeiPortCRCMA CRC errors on payload field of MA1 (Active Maintenance type 1) cells 128 : adnAeiPortCRCSIC CRC errors on payload field of SIC (Self Identified Cell) cells 256 : adnAeiPortNPE parity errors on payload 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 active maintenance cell received with error indication 131072 : adnAeiPortNSFOF network signalling FIFO overflow 262144 : adnAeiPortNFWF network FIFO write failure 524288 : adnAeiPortSFWF signalling FIFO write failure 1048576 : adnAeiPortNSFRF network signalling FIFO read failure 4194304 : adnAeiPortUSFRF user signalling FIFO read failure 8388608 : adnAeiPortUFWF user FIFO write failure 16777216 : adnAeiPortUSFOF user signalling FIFO overflow 33554432 : adnAeiPortNICI cells received on non-active ICI (Internal Communication Interface) 67108864 : adnAeiPortNCRC CRC errors detected on network side 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error on network side 268435456 : adnAeiPortUCRC CRC errors detected on user side 536870912 : adnAeiPortUAAL AAL sequence error on user side 2147483648: adnAeiPortSFIFO load sharing FIFO overflow N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0. |
| adnAeiPortEntry | 1.3.6.1.4.1.637.3.1.5.15.4.1 | not-accessible | An entry in the AEI (ATM Electrical Interface) port table. There is one entry for each port of a given ATM board, that is, two entries for HSC (High Speed Coupler) and CIG (Cell Interconnection Gateway) boards, sixteen entries for ASE (ATM Switching Element) boards. The index corresponds to equipment type 'aeiPort' in the adnEquipTable. | |
| CTR adnAeiPortErCECHCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.7 | Counter | read-only | The counter associated with the number of corrected errors in cell header; counter #4 of the ATM core. |
| adnAeiPortErCounterEntry | 1.3.6.1.4.1.637.3.1.5.15.23.1 | not-accessible | An entry in the ATM electrical interface (AEI) port error counter table. | |
| adnAeiPortErCounterTable | 1.3.6.1.4.1.637.3.1.5.15.23 | not-accessible | This table is the ATM electrical interface (AEI) port error counter table. Each counter corresponds to a defect number identified by a bit set in the adnAeiPortEratus of the adnAeiPortTable. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board. | |
| CTR adnAeiPortErCRCMA1Counter | 1.3.6.1.4.1.637.3.1.5.15.23.1.19 | Counter | read-only | The counter associated with the number of CRC errors on payload field of maintenance active cells of type 1 (MA1); counter #6 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards, the BBTP3C boards and for the HBCEx boards. |
| CTR adnAeiPortErCRCSICCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.20 | Counter | read-only | The counter associated with the number of CRC errors on payload field of self identified cells (SIC); counter #7 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards, the BBTP3C boards and for the HBCEx boards. |
| CTR adnAeiPortErEMA1Counter | 1.3.6.1.4.1.637.3.1.5.15.23.1.11 | Counter | read-only | The counter associated with the number of data maintenance cells received with error indication; counter #14 of the ATM core. |
| CTR adnAeiPortErIEMRAMPCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.18 | Counter | read-only | The counter associated with the number of BGIEM chip RAM parity errors; counter #3 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErLOSCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.15 | Counter | read-only | The counter associated with the loss of synchronization intervals; counter #1 of the ATM core; this counter is only relevant for the matrix board, for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErNAALCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.14 | Counter | read-only | The counter associated with the number of ATM adaptation layer (AAL) sequence errors on network side; counter #27 of the ATM core. |
| CTR adnAeiPortErNCRCCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.13 | Counter | read-only | The counter associated with the number of CRC errors on network side; counter #26 of the ATM core. |
| CTR adnAeiPortErNFOFCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.6 | Counter | read-only | The counter associated with the number of network FIFO overflow intervals; counter #2 of the ATM core. |
| CTR adnAeiPortErNFWFCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.22 | Counter | read-only | The counter associated with the number of network FIFO write failures; counter #18 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErNICICounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.12 | Counter | read-only | The counter associated with the number of cells received on non active internal channel identifier (ICI); counter #25 of the ATM core this counter is not relevant for the HBCEx boards. |
| CTR adnAeiPortErNMA1Counter | 1.3.6.1.4.1.637.3.1.5.15.23.1.10 | Counter | read-only | The counter associated with the number of lost data maintenance cells; counter #12 of the ATM core. |
| CTR adnAeiPortErNPECounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.9 | Counter | read-only | The counter associated with the number of parity errors on payload field of cells; counter #8 of the ATM core. |
| CTR adnAeiPortErNSFOFCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.21 | Counter | read-only | The counter associated with the number of network signalling FIFO overflows; counter #17 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErNSFRFCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.24 | Counter | read-only | The counter associated with the number of network signalling FIFO read failures; counter #20 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErOOSCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.5 | Counter | read-only | The counter associated with the duration of the out of synchronization. expressed in milliseconds; counter #0 of the ATM core. |
| INT adnAeiPortErOrWgStatus | 1.3.6.1.4.1.637.3.1.5.15.23.1.1 | INTEGER | read-only | This variable indicates the gravity of a port failure. It is a bit map represented as a sum. Each bit position maps to the corresponding position in the nominator adnAeiPortASEStatus, adnAeiPortCIGStatus or adnAeiPortHSCStatus (which defines the port's failure status). The adnAeiPortErOrWgStatus bit classifies the failure as either an error (value '1') or a warning (value '0'). A bit value of '0' can also mean the failure classification does not apply to the failure status. |
| INT adnAeiPortErOrWngStatus | 1.3.6.1.4.1.637.3.1.5.15.4.1.2 | INTEGER | read-only | This variable indicates the gravity of a port failure. It is a bit map represented as a sum. Each bit position maps to the corresponding position in the nominator adnAeiPortStatus (which defines the port's failure status). The adnAeiPortErOrWngStatus bit classifies the failure as either an error (value '1') or a warning (value '0'). A bit value of '0' can also mean the failure classification does not apply to the failure status. |
| CTR adnAeiPortErRTAGCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.16 | Counter | read-only | The counter associated with the number of unallowed routing tags; counter #9 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortErSFIFOCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.30 | Counter | read-only | The counter associated with the number of load sharing FIFO overflows; counter #31 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErSFWFCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.23 | Counter | read-only | The counter associated with the number of signalling FIFO write failures; counter #19 of the ATM core; this counter is not relevant for the matrix board., the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErUAALCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.29 | Counter | read-only | The counter associated with the number of ATM adaptation layer (AAL) sequence errors on user side; counter #29 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards, the BBTP3C boards and for the HBCEx boards. |
| CTR adnAeiPortErUCECHCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.8 | Counter | read-only | The counter associated with the number of uncorrected errors in cell header; counter #5 of the ATM core. |
| CTR adnAeiPortErUCRCCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.28 | Counter | read-only | The counter associated with the number of CRC errors ion user side; counter #28 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards, the BBTP3C boards and for the HBCEx boards. |
| CTR adnAeiPortErUFWFCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.26 | Counter | read-only | The counter associated with the number of user FIFO write failures; counter #23 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErURCCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.17 | Counter | read-only | The counter associated with the number of unrouted cells; counter #30 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortErUSFOFCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.27 | Counter | read-only | The counter associated with the number of user signalling FIFO overflows; counter #24 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAeiPortErUSFRFCounter | 1.3.6.1.4.1.637.3.1.5.15.23.1.25 | Counter | read-only | The counter associated with the number of user signalling FIFO read failures; counter #22 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| INT adnAeiPortHSCStatus | 1.3.6.1.4.1.637.3.1.5.15.23.1.4 | INTEGER | read-only | This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for HSC boards (except CEM8 boards). For HSC boards except BBTS1C and BBTP3C boards, the bit positions are : 1 : adnAeiPortOOS out-of-synchronization 4 : adnAeiPortNFOF network FIFO overflows 8 : adnAeiPortIEMRAMP BGIEM chip RAM parity errors 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 64 : adnAeiPortCRCMA CRC errors on payload field of MA1 (Active Maintenance type 1) cells 128 : adnAeiPortCRCSIC CRC errors on payload field of SIC (Self Identified Cell) cells 256 : adnAeiPortNPE parity errors on payload 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 active maintenance cell received with error indication 131072 : adnAeiPortNSFOF network signalling FIFO overflow 262144 : adnAeiPortNFWF network FIFO write failure 524288 : adnAeiPortSFWF signalling FIFO write failure 1048576 : adnAeiPortNSFRF network signalling FIFO read failure 4194304 : adnAeiPortUSFRF user signalling FIFO read failure 8388608 : adnAeiPortUFWF user FIFO write failure 16777216 : adnAeiPortUSFOF user signalling FIFO overflow 33554432 : adnAeiPortNICI cells received on non-active ICI (Internal Communication Interface) 67108864 : adnAeiPortNCRC CRC errors detected on network side 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error on network side 268435456 : adnAeiPortUCRC CRC errors detected on user side 536870912 : adnAeiPortUAAL AAL sequence error on user side 2147483648: adnAeiPortSFIFO load sharing FIFO overflow For the BBTS1C and BBTP3C boards, the bit positions are : 1 : adnAeiPortOOS synchronization fault ATM Electrical Interface 2 : adnAeiPortLOS synchronization fault 8 bit parallel Atm Internal Interface 4 : adnAeiPortNFOF network FIFO overflows 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 256 : adnAeiPortNPE parity errors on payload 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 error active maintenance cell received 67108864 : adnAeiPortNCRC CRC errors detected on payload field 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error in AEI reception N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0. |
| INT adnAeiPortLinkId | 1.3.6.1.4.1.637.3.1.5.15.4.1.5 | INTEGER | read-only | This is the adnEquipIndex of the AEI (ATM Electrical Interface) port on the ASE (ATM Switching Element) board which is linked with this AEI port. |
| INT adnAeiPortStatus | 1.3.6.1.4.1.637.3.1.5.15.4.1.3 | INTEGER | read-only | This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. For all ATM boards, except the ASE (ATM Switching Element) board, the bit positions are listed below. Errors followed by an asterisk apply to ASE boards. 1 : adnAeiPortOOS* out-of-synchronization ATM Electrical Interface 4 : adnAeiPortNFOF* network FIFO overflows 8 : adnAeiPortIEMRAMP BGIEM chip RAM parity errors 16 : adnAeiPortCECH* corrected errors in cell header 32 : adnAeiPortUCECH* uncorrected errors in cell header 64 : adnAeiPortCRCMA1 CRC errors on payload field of MA1 (Active Maintenance type 1) cells 128 : adnAeiPortCRCSIC CRC errors on payload field of SIC (Self Identified Cell) cells 256 : adnAeiPortNPE* parity errors on payload 4096 : adnAeiPortNMA1* no active maintenance cell received 16384 : adnAeiPortEMA1* error active maintenance cell received 131072 : adnAeiPortNSFOF network signalling FIFO overflow 262144 : adnAeiPortNFWF network FIFO write failure 524288 : adnAeiPortSFWF signalling FIFO write failure 1048576 : adnAeiPortNSFRF network signalling FIFO read failure 4194304 : adnAeiPortUSFRF user signalling FIFO read failure 8388608 : adnAeiPortUFWF user FIFO write failure 16777216 : adnAeiPortUSFOF user signalling FIFO overflow 33554432 : adnAeiPortNICI* cells received on non-active ICI (Internal Communication Interface) 67108864 : adnAeiPortNCRC CRC errors detected on network side 134217728 : adnAeiPortNAAL* AAL (ATM Adaptation Layer) sequence error on network side 268435456 : adnAeiPortUCRC* CRC errors detected on user side 536870912 : adnAeiPortUAAL AAL sequence error on user side For the ASE (ATM Switching Element) board, there are specific defects corresponding to the following bit positions : 2 : adnAeiPortLOS loss-of-synchronization AEI 512 : adnAeiPortRTAG error in routing tag data 1073741830: adnAeiPortURC unrouted cells N.B.: This variable is significant when the operational state of the port is disabled. When there is no port error, this variable has the value 0. |
| adnAeiPortTable | 1.3.6.1.4.1.637.3.1.5.15.4 | not-accessible | This table is the AEI (ATM Electrical Interface) port table. | |
| INT adnAeiPortTestResult | 1.3.6.1.4.1.637.3.1.5.15.4.1.4 | INTEGER | read-only | This is the result of the last test launched on the port. It is a bit map represented as a sum; therefore each bit corresponds to a possible cause for a failing test result ('0' if test succeeded, '1' if test failed). For HSC (High Speed Coupler) or CIG (Cell Interconnection Gateway) boards, the bit positions are: 1 : failure in the BGIEM chip RAM 2 : failure in loopback test in the BGAEI chip. For ASE (ATM Switching Element) boards, the bit position is: 2 : failure in loopback test in the BGAT1 chip. N.B.: When no test has been launched, this variable has the value zero. |
| adnAeiPortTraCounterEntry | 1.3.6.1.4.1.637.3.1.5.15.24.1 | not-accessible | An entry in the ATM electrical interface (AEI) port traffic counters table. | |
| adnAeiPortTraCounterTable | 1.3.6.1.4.1.637.3.1.5.15.24 | not-accessible | This table is the ATM electrical interface (AEI) port traffic counters table. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board. | |
| CTR adnAeiPortTraEBCCCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.23 | Counter | read-only | The counter associated with the number of established backward connection component; counter #18 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAeiPortTraEFCCCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.11 | Counter | read-only | The counter associated with the number of established forward connection component; counter #17 of the ATM core; this counter is not relevant for the matrix board. |
| GAU adnAeiPortTraFPTPICICounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.19 | Gauge | read-only | The counter associated with the number of free point-to-point (PTP) internal channel identifiers (ICI); counter #12 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortTraInCellsCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.21 | Counter | read-only | The counter associated with the number of incoming cells; counter #15 of the ATM core. |
| GAU adnAeiPortTraMPriorBWCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.20 | Gauge | read-only | The counter associated with the reserved mean priority bandwith (BW); Counter #14 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortTraOutCellsCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.22 | Counter | read-only | The counter associated with the number of outgoing cells; counter #16 of the ATM core. |
| GAU adnAeiPortTraPeakBWCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.18 | Gauge | read-only | The counter associated with the reserved peak bandwith (BW); counter #10 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortTraPTMBWICIRqCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.13 | Counter | read-only | The counter associated with the number of point-to-multipoint (PTM) bandwith or internal channel identifier (BW,ICI) requests; counter #5 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortTraPTMBWRjCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.15 | Counter | read-only | The counter associated with the number of point-to-multipoint (PTM) bandwith (BW) requests failure; counter #7 of the ATM core; this counter is only relevant for the matrix board. |
| GAU adnAeiPortTraPTMCnxCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.10 | Gauge | read-only | The counter associated with the number of point-to-multipoint (PTM) connections in progress; counter #14 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAeiPortTraPTMICIRjCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.17 | Counter | read-only | The counter associated with the number of point-to-multipoint (PTM) internal channel identifier (ICI) requests failure; counter #9 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortTraPTMSetRjBCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.4 | Counter | read-only | The counter associated with the number of point-to-multipoint (PTM) setup rejects due to blocking; counter #4 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAeiPortTraPTMSetRjCCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.6 | Counter | read-only | The counter associated with the number of point-to-multipoint (PTM) setup rejects due to communication; counter #6 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAeiPortTraPTMSetRqCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.2 | Counter | read-only | The counter associated with the number of point-to-multipoint (PTM) setup requests; counter #2 of the ATM core. |
| CTR adnAeiPortTraPTMSetTrCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.8 | Counter | read-only | The counter associated with the number of point-to-multipoint (PTM) setup trials; counter #8 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAeiPortTraPTPBWICIRqCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.12 | Counter | read-only | The counter associated with the number of point-to-point (PTP) bandwith or internal channel identifier (BW,ICI) requests; counter #4 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortTraPTPBWRjCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.14 | Counter | read-only | The counter associated with the number of point-to-point (PTP) bandwith (BW) requests failure; counter #6 of the ATM core; this counter is only relevant for the matrix board. |
| GAU adnAeiPortTraPTPCnxCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.9 | Gauge | read-only | The counter associated with the number of point-to-point (PTP) connections in progress; counter #13 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAeiPortTraPTPICIRjCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.16 | Counter | read-only | The counter associated with the number of point-to-point (PTP) internal channel identifier (ICI) requests failure; counter #8 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAeiPortTraPTPSetRjBCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.3 | Counter | read-only | The counter associated with the number of point-to-point (PTP) setup rejects due to blocking; counter #3 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAeiPortTraPTPSetRjCCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.5 | Counter | read-only | The counter associated with the number of point-to-point (PTP) setup rejects due to communication; counter #5 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAeiPortTraPTPSetRqCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.1 | Counter | read-only | The counter associated with the number of point-to-point (PTP) setup requests; counter #1 of the ATM core. |
| CTR adnAeiPortTraPTPSetTrCounter | 1.3.6.1.4.1.637.3.1.5.15.24.1.7 | Counter | read-only | The counter associated with the number of point-to-point (PTP) setup trials; counter #7 of the ATM core; this counter is not relevant for the matrix board. |
| INT adnAJCurLocIfIndex | 1.3.6.1.4.1.637.3.1.5.8.14.1.1 | INTEGER | not-accessible | Uniquely identifies a network interface within a node. |
| INT adnAJCurMetricCost1 | 1.3.6.1.4.1.637.3.1.5.8.14.1.2 | INTEGER | read-only | Cost in Metric 1 for a particular logical line entry with a specific type of service. |
| INT adnAJCurMetricCost2 | 1.3.6.1.4.1.637.3.1.5.8.14.1.3 | INTEGER | read-only | Cost in Metric 2 for a particular logical line entry with a specific type of service. |
| INT adnAJCurMetricCost3 | 1.3.6.1.4.1.637.3.1.5.8.14.1.4 | INTEGER | read-only | Cost in Metric 3 for a particular logical line entry with a specific type of service. |
| INT adnAJCurNodetype | 1.3.6.1.4.1.637.3.1.5.8.13.1.2 | INTEGER | read-only | Node type can be TPX or HSS. Commonly used to distinguish interworking characteristics. |
| INT adnAJCurNumLines | 1.3.6.1.4.1.637.3.1.5.8.13.1.3 | INTEGER | read-only | Number of available logical lines (channels) in the connection to this adjacent node. |
| INT adnAJCurNxtLine | 1.3.6.1.4.1.637.3.1.5.8.13.1.4 | INTEGER | read-only | Specifies the next logical line to be used for routing message traffic; allows HSS routing services to spread the routing message traffic over all logical lines comprising the connection. |
| INT adnAJCurRemIfIndex | 1.3.6.1.4.1.637.3.1.5.8.14.1.5 | INTEGER | read-only | Uniquely identifies a network interface within the HSS remote node. If the remote node is a TPX, this object identifies the T1 interface identifier. |
| adnAjLinehdrEntry | 1.3.6.1.4.1.637.3.1.5.8.27.1 | not-accessible | Each entry (row) in the adnAdjLinehdrTable provides key information about a particular adjacent node. | |
| INT adnAJManLocIfIndex | 1.3.6.1.4.1.637.3.1.5.8.11.1.1 | INTEGER | not-accessible | Identifies, uniquely within a node, a network interface. |
| INT adnAJManMetricCost1 | 1.3.6.1.4.1.637.3.1.5.8.11.1.2 | INTEGER | not-accessible | Cost in Metric 1 for a particular logical line entry with a specific type of service. |
| INT adnAJManMetricCost2 | 1.3.6.1.4.1.637.3.1.5.8.11.1.3 | INTEGER | not-accessible | Cost in Metric 2 for a particular logical line entry with a specific type of service. |
| INT adnAJManMetricCost3 | 1.3.6.1.4.1.637.3.1.5.8.11.1.4 | INTEGER | not-accessible | Cost in Metric 3 for a particular logical line entry with a specific type of service. |
| INT adnAJManNumLines | 1.3.6.1.4.1.637.3.1.5.8.10.1.2 | INTEGER | read-only | Count of the available logical lines in the connection to this adjacent node. |
| INT adnAJManRemIfIndex | 1.3.6.1.4.1.637.3.1.5.8.11.1.5 | INTEGER | read-only | Uniquely identifies a network interface within the HSS remote node. If the remote node is a TPX, this object identifies the T1 interface identifier. |
| INT adnAJNState | 1.3.6.1.4.1.637.3.1.5.8.13.1.5 | INTEGER | read-only | Identifies a state that governs HSS routing services adjacency formation. |
| STR adnAmAccountingFilePathName | 1.3.6.1.4.1.637.3.1.5.11.1.7 | DisplayString | read-only | The complete pathname of the current accounting file in the Network Management System directory which contains accounting data collected since the last posting. The complete pathname starts with and includes the root directory. |
| NTF adnAmAccountingFileReady | 1.3.6.1.4.1.637.3.1.6.1.0.3 | This trap indicates whether the accounting file, whose path the object following adnTrapCategory defines, is ready to be transferred to the NMS via FTP services. | ||
| INT adnAmCollectInterval | 1.3.6.1.4.1.637.3.1.5.11.1.2 | INTEGER | read-write | Defines the time period between collections of accounting data. The unit of time for this interval is minutes. Common Name: Acctg Collection Interval |
| ADN adnAmEnableAccounting | 1.3.6.1.4.1.637.3.1.5.11.1.1 | AdnEnableDisabled | read-write | Indicates whether accounting data is collected and processed for all subscribing applications on the node by the Node Management Subsystem. Common Name: Node Accounting |
| adnAmGroup | 1.3.6.1.4.1.637.3.1.5.11.1 | |||
| ADN adnAmMakeAccounting | 1.3.6.1.4.1.637.3.1.5.11.1.5 | AdnEnableDisabled | read-write | When adnAmMakeAccounting is enabled, the accounting data from all applications that have registered for the service are requested and collected in a common file. After waiting the time interval defined in adnAmMakeAccountingWindow to receive all responses, the accounting file is transferred to the Network Management System directory and the Network Management System is notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. |
| INT adnAmMakeAccountingWindow | 1.3.6.1.4.1.637.3.1.5.11.1.6 | INTEGER | read-write | When adnAmMakeAccounting is enabled, accounting data is requested from all applications that have registered for this service. adnAmMakeAccountingWindow is the time interval during which responses to these requests are accepted. adnAmMakeAccountingWindow is specified in units of seconds. Common Name: Make Acctg Window |
| ADN adnAmPostAccounting | 1.3.6.1.4.1.637.3.1.5.11.1.4 | AdnEnableDisabled | read-write | When adnAmPostAccounting is enabled, a file containing the current accounting data is transferred to the Network Management System directory and the Network Management System is subsequently notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. This file contains all the accounting data collected since the lasting posting. |
| INT adnAmPostInterval | 1.3.6.1.4.1.637.3.1.5.11.1.3 | INTEGER | read-write | Defines a time period between transfers of the accounting data file to the Network Management System directory. After each transfer, the Network Management System is also notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. Each posting contains only accounting data collected since the last posting. The unit of time for this interval is minutes. Common Name: Acctg Posting Interval |
| INT adnAnAddrLength | 1.3.6.1.4.1.637.3.1.5.8.18.1.8 | INTEGER | read-only | The number of digits in the Address that is supported by network. |
| OCT adnAnAdIndex | 1.3.6.1.4.1.637.3.1.5.8.18.1.2 | OCTET STRING | not-accessible | Target address, maintained as ASCII decimal. |
| adnAnEntry | 1.3.6.1.4.1.637.3.1.5.8.18.1 | not-accessible | Each entry (row) in the adnAnTable that maps an address supported in the network to the node(s) where it is supported. An address may be supported multiple times. | |
| adnAnhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.17.1 | not-accessible | Each row provides information about a header of a specific numbering plan table. | |
| INT adnAnhdrNum | 1.3.6.1.4.1.637.3.1.5.8.17.1.4 | INTEGER | read-only | Number of address entries in the address-to-node mapping table. |
| ADN adnAnhdrNumPlanIndex | 1.3.6.1.4.1.637.3.1.5.8.17.1.1 | AdnRoutesNumPlan | not-accessible | Type of address; for example, X.121. |
| ADN adnAnhdrStamp | 1.3.6.1.4.1.637.3.1.5.8.17.1.3 | AdnNodeTimeStamp | read-only | Time-of-day stamp of the address-to-node mapping table. |
| adnAnhdrTable | 1.3.6.1.4.1.637.3.1.5.8.17 | not-accessible | Information about the headers of the address-to-node table for each numbering plan. | |
| INT adnAnhdrVer | 1.3.6.1.4.1.637.3.1.5.8.17.1.2 | INTEGER | read-only | Version number of the address-to-node mapping table. |
| INT adnAnNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.8.18.1.6 | INTEGER | read-only | The area number part of adnAnNodeIndex, the routing area number of the node at the remote endpoint. |
| ADN adnAnNodeIndex | 1.3.6.1.4.1.637.3.1.5.8.18.1.3 | AdnRoutingID | read-only | Node ID for a specific node which supports the target address. Since a single target address may be supported by more than one node (several service-gateway nodes for instance), there should be a separate entry for each one. |
| INT adnAnNodeMacNum | 1.3.6.1.4.1.637.3.1.5.8.18.1.5 | INTEGER | read-only | The machine number part of adnAnNodeIndex, the routing node ID of the node at the remote endpoint. |
| ADN adnAnNumPlanIndex | 1.3.6.1.4.1.637.3.1.5.8.18.1.1 | AdnRoutesNumPlan | not-accessible | Type of address; for example, X.121. |
| ADN adnAnodeIndex | 1.3.6.1.4.1.637.3.1.5.8.27.1.1 | AdnRoutingID | not-accessible | Each adjacent node ID identifies an entry in the adjacency table. |
| INT adnAnPartialAddrFlag | 1.3.6.1.4.1.637.3.1.5.8.18.1.7 | INTEGER | read-only | When a sequence of addresses is homing through a single gateway (Gateway 1), a user can enter a partial address by setting Partial Address Flag to `YES' to support the entire range of addresses. E.g.: 31103600 to 31103699 are going to Gateway 1. User can enter 311036 to Gateway 1 with adnAnPartialAddrFlag `yes'. |
| INT adnAnRank | 1.3.6.1.4.1.637.3.1.5.8.18.1.4 | INTEGER | read-only | Rank (cost order) of the node ID to reach the address. The rank of the entry with the lowest cost is 1. |
| adnAnTable | 1.3.6.1.4.1.637.3.1.5.8.18 | not-accessible | HSS routing services address-to-node mapping table on the control unit. The address-to-node table records the node(s) in the network that supports the specified address. This table is used only by the frame relay type of service. | |
| adnApplique | 1.3.6.1.4.1.637.3.1.2.8 | |||
| adnAse | 1.3.6.1.4.1.637.3.1.2.2.5 | |||
| adnAseBoardTrMgtGroup | 1.3.6.1.4.1.637.3.1.5.15.26 | |||
| INT adnAseBoardTrMgtHMP0ObsTh | 1.3.6.1.4.1.637.3.1.5.15.26.2 | INTEGER | read-write | This indicates the first observation threshold; when the observation threshold is exceeded, the adnAseBoardTrMgtObs1Counter increases each time a cell is received; the value range of this threshold is 0..255(cells); this is relevant only for the matrix board. |
| INT adnAseBoardTrMgtHMP1ObsTh | 1.3.6.1.4.1.637.3.1.5.15.26.3 | INTEGER | read-write | This indicates the second observation threshold; when the observation threshold is exceeded, the adnAseBoardTrMgtObs2Counter increases each time a cell is received; the value range of this threshold is 0..255(cells); this is relevant only for the matrix board. |
| ADN adnAseBoardTrMgtIFR | 1.3.6.1.4.1.637.3.1.5.15.26.7 | AdnPercent | read-write | This indicates the Interface Filling Rate (IFR) for all AEI ports; this is relevant only for the matrix board. |
| INT adnAseBoardTrMgtK | 1.3.6.1.4.1.637.3.1.5.15.26.5 | INTEGER | read-write | This indicates the Connection Admission Control (CAC) overbooking factor for all AEI ports, expressed as a percentage; the value range of this percentage is 100..1000; this is relevant only for the matrix board. |
| ADN adnAseBoardTrMgtKUbr | 1.3.6.1.4.1.637.3.1.5.15.26.6 | AdnPercent | read-write | This indicates the overbooking factor allowed for Unspecified Bit Rate (UBR) connections; the percentage is used to calculate the allocated bandwidth of UBR connections; this is relevant only for the BBASEB matrix board. |
| CTR adnAseBoardTrMgtObs1Counter | 1.3.6.1.4.1.637.3.1.5.15.26.10 | Counter | read-only | The counter associated with the number of cells received since the first observation threshold is exceeded; counter #0 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAseBoardTrMgtObs2Counter | 1.3.6.1.4.1.637.3.1.5.15.26.11 | Counter | read-only | The counter associated with the number of cells received since the second observation threshold is exceeded; counter #1 of the ATM core; this counter is only relevant for the matrix board. |
| INT adnAseBoardTrMgtOBStatus | 1.3.6.1.4.1.637.3.1.5.15.26.4 | INTEGER | read-only | This variable indicates if cells are discarded because of FIFO overflow or Selective Cell Discard (SCD). It is a bit map represented as a sum. The bit positions are : 1 : Selective Cell Discard activated 2 : FIFO overflow N.B.:When there is neither overflow nor SCD activation, the corresponding bit has the value '0'. this is relevant only for the BBASEB matrix board. |
| CTR adnAseBoardTrMgtOVFLCounter | 1.3.6.1.4.1.637.3.1.5.15.26.9 | Counter | read-only | The counter associated with the number of high priority cells lost due to buffer overflow; counter #27 of the ATM core; this counter is only relevant for the BBASEB matrix board. |
| CTR adnAseBoardTrMgtSCDCounter | 1.3.6.1.4.1.637.3.1.5.15.26.8 | Counter | read-only | The counter associated with the number of low priority cells lost due to Selective Cell Discard (SCD); counter #26 of the ATM core; this counter is only relevant for the BBASEB matrix board. |
| INT adnAseBoardTrMgtSCDTh | 1.3.6.1.4.1.637.3.1.5.15.26.1 | INTEGER | read-write | This indicates the Selective Cell Discard (SCD) threshold; when the filling of the FIFO reaches the threshold, any incoming low priority cell will be discarded; the value range of this threshold is 0..255(cells); this is relevant only for the BBASEB matrix board. |
| INT adnAssocIfIndex | 1.3.6.1.4.1.637.3.1.5.19.1.3 | INTEGER | read-only | The value of this object corresponds to the ifIndex of the associated interface, this value is not significant in the case where adnProtocolType is g25 or x75. In that case a GET request on this OID will be replied with the response noSuchname into error-status field. |
| INT adnAssocNodeIndex | 1.3.6.1.4.1.637.3.1.5.19.1.4 | INTEGER | read-only | The value of this object corresponds to the adnNodeIndex of the associated node, this value is not significant in the case where adnProtocolType is g25 or x75. In that case a GET request on this OID will be replied with the response noSuchname into error-status field. |
| CTR adnAtmAal5PerfCpiErrors | 1.3.6.1.4.1.637.3.1.4.37.1.20.1.2 | Counter | read-only | The number of ATM Adaptation Layer 5 (AAL5) Common Part Convergence Sublayer (CPCS) PDUs discarded on this Virtual Channel Link (VCL) because the value of the Common Part Interface (CPI) field in the PDU trailer is not 0. |
| adnAtmAal5PerfEntry | 1.3.6.1.4.1.637.3.1.4.37.1.20.1 | not-accessible | An entry in the adnAtmAal5PerfTable. There is one entry for each ATM Adaptation Layer 5 (AAL5) Virtual Channel Connection (VCC). | |
| CTR adnAtmAal5PerfLengthErrors | 1.3.6.1.4.1.637.3.1.4.37.1.20.1.1 | Counter | read-only | The number of ATM Adaptation Layer 5 (AAL5) Common Part Convergence Sublayer (CPCS) PDUs discarded on this Virtual Channel Link (VCL) because the value of the length field in the PDU trailer is not consistent with the actual PDU payload length. |
| adnAtmAal5PerfTable | 1.3.6.1.4.1.637.3.1.4.37.1.20 | not-accessible | This table is the extension of the aal5VCCTable, described in RFC 1695. This table contains ATM Adaptation Layer 5 (AAL5) performance counters. | |
| INT adnAtmAccCalledPartyLength | 1.3.6.1.4.1.637.3.1.4.37.2.1.20 | INTEGER | not-accessible | This is the number of significant digits in object adnAtmAccCalledParty. Common Name : Length of Called Party Number. |
| OCT adnAtmAccCalledPartyNumber | 1.3.6.1.4.1.637.3.1.4.37.2.1.21 | OCTET STRING | not-accessible | This is the value of the called party number (fixed length of 40 digits). Common Name : Called Party Number. |
| INT adnAtmAccCalledPartyNumPlan | 1.3.6.1.4.1.637.3.1.4.37.2.1.19 | INTEGER | not-accessible | This is the type of numbering plan of the called party number. Common Name : Numbering Plan, Num Plan. |
| INT adnAtmAccCallingPartyLength | 1.3.6.1.4.1.637.3.1.4.37.2.1.17 | INTEGER | not-accessible | This is the number of significant digits in object adnAtmAccCallingParty. Common Name : Length of Calling Party Number. |
| OCT adnAtmAccCallingPartyNumber | 1.3.6.1.4.1.637.3.1.4.37.2.1.18 | OCTET STRING | not-accessible | This is the value of the calling party number (fixed length of 40 digits). Common Name : Calling Party Number. |
| INT adnAtmAccCallingPartyNumPlan | 1.3.6.1.4.1.637.3.1.4.37.2.1.16 | INTEGER | not-accessible | This is the type of numbering plan of the calling party number. Common Name : Numbering Plan, Num Plan. |
| INT adnAtmAccCallTerm | 1.3.6.1.4.1.637.3.1.4.37.2.1.11 | INTEGER | not-accessible | This object indicates a terminated ticket or an intermediate charging ticket : - terminated : PVC has been de-configured or disrupted SVC has been cleared (user or network cause) - intermediate : periodic collection of PVCs and long SVCs operator initiated collection of PVCs and SVCs. Intermediate tickets are for future use. Common Name : Call Terminated / not Terminated. |
| INT adnAtmAccClearingCause | 1.3.6.1.4.1.637.3.1.4.37.2.1.46 | INTEGER | read-only | ATM forum cause value in the cause information element. This object is significant when the adnAtmAccCallTerm is equal to 'terminated'. Common Name : Clearing Cause. |
| INT adnAtmAccClearingDiag | 1.3.6.1.4.1.637.3.1.4.37.2.1.47 | INTEGER | read-only | First 4 bytes of the ATM forum diagnostic value in the cause information element. This object is significant when the adnAtmAccCallTerm is equal to 'terminated'. Common Name : Diagnostic Cause. |
| INT adnAtmAccConnDuration | 1.3.6.1.4.1.637.3.1.4.37.2.1.28 | INTEGER | not-accessible | This object represents the duration (tenths of a second) while the connection has been in the transfer phase. The total duration of a connection is to be accumulated over all the intermediate tickets that are generated for that connection. Common name : Duration of the Ticket. |
| INT adnAtmAccConnectionTopology | 1.3.6.1.4.1.637.3.1.4.37.2.1.14 | INTEGER | not-accessible | This object describes the characteristics of the connection at the location where this charging ticket is generated : Only the following values can be provided in a HSS charging ticket : - pointTopoint. Common Name : Connection Topology. |
| INT adnAtmAccConnectionType | 1.3.6.1.4.1.637.3.1.4.37.2.1.13 | INTEGER | not-accessible | This is the connection type : PVC versus SVC. Only the following values can be provided in a HSS charging ticket : - pvc, - svc. Common Name : Connection Type. |
| INT adnAtmAccConnStartTime | 1.3.6.1.4.1.637.3.1.4.37.2.1.27 | INTEGER | not-accessible | In the first ticket generated : - this indicates the time of the CONNECT message when the establishment phase has been successful, - this indicates the time of the SET-UP message when the establishment phase has been unsuccessful, In the following intermediate tickets : - this indicates the time of the start of the interval. This is the coordinated universal time : number of seconds elapsed since 1970/01/01. Common name : Start Time. |
| INT adnAtmAccConnUniqueID | 1.3.6.1.4.1.637.3.1.4.37.2.1.26 | INTEGER | not-accessible | This object serves to uniquely identify the two charging tickets that are generated at both ends of an ATM connection. The ConnUniqueID is a value which is local to the calling ATM interface, it is incremented by the calling ATM interface. The ConnUniqueID is significant for : - each point to point connection, - each leaf of a point to point connection. Common name : Connection Unique Identifier |
| INT adnAtmAccCumulTransitDelay | 1.3.6.1.4.1.637.3.1.4.37.2.1.30 | INTEGER | read-only | This is the value of the transit delay provided by the network for that connection. Common name : Cumulative Transit Delay. |
| adnAtmAccEntry | 1.3.6.1.4.1.637.3.1.4.37.2.1 | not-accessible | One instance of the ATM charging ticket. | |
| INT adnAtmAccEquipType | 1.3.6.1.4.1.637.3.1.4.37.2.1.1 | INTEGER | not-accessible | This is the type of the equipment which generates this charging ticket. hss700 : Alcatel 1100 HSS Series 400/700, hss1000 : Alcatel 1100 HSS Series 1000. Common Name : Equipment Type. |
| INT adnAtmAccInterfaceType | 1.3.6.1.4.1.637.3.1.4.37.2.1.12 | INTEGER | not-accessible | Type of the ATM interface on which generates this charging ticket. Common Name : ATM Interface Type. |
| INT adnAtmAccLocalChassis | 1.3.6.1.4.1.637.3.1.4.37.2.1.4 | INTEGER | not-accessible | This is the chassis number where the interface is located. Common Name : Local Chassis |
| INT adnAtmAccLocalLine | 1.3.6.1.4.1.637.3.1.4.37.2.1.6 | INTEGER | not-accessible | This is the line number in the slot. Common Name : Local Line |
| INT adnAtmAccLocalNodeId | 1.3.6.1.4.1.637.3.1.4.37.2.1.3 | INTEGER | not-accessible | This is the identifier of the node which generates this charging ticket. For HSS, the format of the ADN Node Routing ID is used : Bits 31-23 (9 bits) reserved for future use Bits 22-16 ( 7 bits) area identifier Bits 15-0 (16 bits) machine identifier Common Name : Local Node Identifier. |
| INT adnAtmAccLocalSlot | 1.3.6.1.4.1.637.3.1.4.37.2.1.5 | INTEGER | not-accessible | This is the slot number of the interface in the chassis. Common Name : Local Slot |
| INT adnAtmAccLocalVci | 1.3.6.1.4.1.637.3.1.4.37.2.1.23 | INTEGER | not-accessible | The Virtual Channel Identifier (VCI) value on the local ATM interface. Common Name : Virtual Channel Identifier (VCI). |
| INT adnAtmAccLocalVpi | 1.3.6.1.4.1.637.3.1.4.37.2.1.22 | INTEGER | not-accessible | The Virtual Path Identifier (VPI) value on the local ATM interface. Common Name : Virtual Path Identifier (VPI). |
| INT adnAtmAccRcvPacketDiscard | 1.3.6.1.4.1.637.3.1.4.37.2.1.45 | INTEGER | read-only | Whether packet discard option is enabled, in the receiving direction, of this Virtual Channel Link (VCL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded. Common Name : Tail Packet Discard. |
| INT adnAtmAccRcvParam1 | 1.3.6.1.4.1.637.3.1.4.37.2.1.40 | INTEGER | read-only | PARAM1 : always equal to the Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction (switch point of view), of this Virtual Channel Link (VCL). Common Names: PARAM1, Receive Peak Cell Rate (PCR) Aggregate, Receive PCR Aggregate |
| INT adnAtmAccRcvParam2 | 1.3.6.1.4.1.637.3.1.4.37.2.1.41 | INTEGER | read-only | PARAM2 : always equal to the Cell Delay Variation (CDV) tolerance of the traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: PARAM2, Receive Cell Delay Variation (CDV) Tolerance, Receive CDV Tolerance |
| INT adnAtmAccRcvParam3 | 1.3.6.1.4.1.637.3.1.4.37.2.1.42 | INTEGER | read-only | Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccRcvParam3 represents one of the following values : a) The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receivinG direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Aggregate, Receive SCR Aggregate. b) The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Receive PCR CLP 0. c) The Sustainable Cell Rate (SCR) for the Cell Loss PrioritY (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Receive SCR CLP 0. Common Name : PARAM3. |
| INT adnAtmAccRcvParam4 | 1.3.6.1.4.1.637.3.1.4.37.2.1.43 | INTEGER | read-only | Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccRcvParam4 represents one of the following values : a) The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Maximum Burst Size (MBS) Aggregate, Receive MBS Aggregate. b) The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Receive MBS CLP 0. Common Name : PARAM4. |
| INT adnAtmAccRcvTagging | 1.3.6.1.4.1.637.3.1.4.37.2.1.44 | INTEGER | read-only | Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, when cells are not conformant, of this Virtual Channel Link (VCL). Common Name : Cell Tagging Option. |
| INT adnAtmAccRcvTrafficDescrType | 1.3.6.1.4.1.637.3.1.4.37.2.1.39 | INTEGER | read-only | The type of a virtual cross-connection (Virtual Path Connection (VPC) and Virtual Channel Connection (VCC)) traffic descriptor in the receive direction. Depending on the value, the following traffic parameters (defined in the same direction) are initialized: - 'pcrCdv': .PcrAggregate PARAM1 .CdvTol PARAM2 - 'pcrCdvScrMbs': .PcrAggregate PARAM1 .CdvTol PARAM2 .ScrAggregate PARAM3 .MbsAggregate PARAM4 - 'pcrCdvPcr0': .PcrAggregate PARAM1 .CdvTol PARAM2 .PcrClpZero PARAM3 - 'pcrCdvScr0Mbs0': .PcrAggregate PARAM1 .CdvTol PARAM2 .ScrClpZero PARAM3 .MbsClpZero PARAM4 Common name : Traffic Descriptor in the Receiving Direction. |
| INT adnAtmAccRemoteChassis | 1.3.6.1.4.1.637.3.1.4.37.2.1.8 | INTEGER | not-accessible | This is the chassis number where the remote interface is located. Common Name : Remote Chassis. |
| INT adnAtmAccRemoteLine | 1.3.6.1.4.1.637.3.1.4.37.2.1.10 | INTEGER | not-accessible | This is the line number in the remote slot. Common Name : Remote Line |
| INT adnAtmAccRemoteNodeId | 1.3.6.1.4.1.637.3.1.4.37.2.1.7 | INTEGER | not-accessible | This is the identifier of the node which supports the connection at the remote side. For HSS, the format of the ADN Node Routing ID is used : Bits 31-23 (9 bits) reserved for future use Bits 22-16 ( 7 bits) area identifier Bits 15-0 (16 bits) machine identifier Common Name : Remote Node Identifier. |
| INT adnAtmAccRemoteSlot | 1.3.6.1.4.1.637.3.1.4.37.2.1.9 | INTEGER | not-accessible | This is the slot number of the interface in the remote chassis. Common Name : Remote Slot |
| INT adnAtmAccRemVci | 1.3.6.1.4.1.637.3.1.4.37.2.1.25 | INTEGER | not-accessible | The Virtual Channel Identifier (VCI) value at the remote ATM interface. Common Name : Remote Virtual Channel Identifier (VCI). |
| INT adnAtmAccRemVpi | 1.3.6.1.4.1.637.3.1.4.37.2.1.24 | INTEGER | not-accessible | The Virtual Path Identifier (VPI) value at the remote ATM interface. Common Name : Remote Virtual Path Identifier (VPI). |
| INT adnAtmAccReqTransitDelay | 1.3.6.1.4.1.637.3.1.4.37.2.1.29 | INTEGER | read-only | This is the value of the transit delay required by the user for that connection. Common name : Required Transit Delay. |
| INT adnAtmAccSourceDest | 1.3.6.1.4.1.637.3.1.4.37.2.1.15 | INTEGER | not-accessible | This object indicates the location of the node which generates this charging ticket : - source : the node receives the SET-UP message from the calling user. - destination : the node transmits the SET-UP message to the called user. - transit : this value is reserved for the 1000 HSS Series 1000 system (this system may generate charging ticket on trunks for observation purposes). Common Name : Source or Destination. |
| adnAtmAccTable | 1.3.6.1.4.1.637.3.1.4.37.2 | not-accessible | This table constitutes the ATM charging ticket. None of the objects in this table can be obtained via a GET command. These objects are visible only in a charging ticket. Most of these objects duplicate objects in other tables. They are concatenated here to allow the charging ticket to be sent as a single INMP/PFXI table to conserve space. | |
| INT adnAtmAccTicketVersion | 1.3.6.1.4.1.637.3.1.4.37.2.1.2 | INTEGER | not-accessible | This is the identifier of the version (format) of this ATM charging ticket. This object is numbered per type of equipment listed in adnAtmAccEquipType. adnAtmAccTicketVersion = 1 is the first value for Alcatel 1100 HSS Series 400/700. Common Name : Charging Ticket Version. |
| INT adnAtmAccTransferCapability | 1.3.6.1.4.1.637.3.1.4.37.2.1.31 | INTEGER | read-only | The ATM Transfer Capabilities (ATC) offered on a virtual cross-connection (Virtual Path Connection (VPC) and Virtual Channel Connection (VCC)): - Constant Bit Rate (CBR) ATC: CBR Real Time (RT), CBR Non Real Time (NRT) - Variable Bit Rate (VBR) ATC: VBR RT, VBR NRT - Unspecified Bit Rate (UBR) ATC. Common Name: ATM Transfer Capability (ATC). |
| INT adnAtmAccTrmPacketDiscard | 1.3.6.1.4.1.637.3.1.4.37.2.1.38 | INTEGER | read-only | Whether packet discard option is enabled, in the transmit direction, of this Virtual Channel Link (VCL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded. Common Name : Tail Packet Discard. |
| INT adnAtmAccTrmParam1 | 1.3.6.1.4.1.637.3.1.4.37.2.1.33 | INTEGER | read-only | PARAM1 : always equal to the Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction (switch point of view), of this Virtual Channel Link (VCL). Common Names: PARAM1, Transmit Peak Cell Rate (PCR) Aggregate, Transmit PCR Aggregate |
| INT adnAtmAccTrmParam2 | 1.3.6.1.4.1.637.3.1.4.37.2.1.34 | INTEGER | read-only | PARAM2 : always equal to the Cell Delay Variation (CDV) tolerance of the traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: PARAM2, Transmit Cell Delay Variation (CDV) Tolerance, Transmit CDV Tolerance |
| INT adnAtmAccTrmParam3 | 1.3.6.1.4.1.637.3.1.4.37.2.1.35 | INTEGER | read-only | Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccTrmParam3 represents one of the following values : a) The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Sustainable Cell Rate (SCR) Aggregate, Transmit SCR Aggregate. b) The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Transmit PCR CLP 0. c) The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Transmit SCR CLP 0. Common Name : PARAM3. |
| INT adnAtmAccTrmParam4 | 1.3.6.1.4.1.637.3.1.4.37.2.1.36 | INTEGER | read-only | Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccTrmParam4 represents one of the following values : a) The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Maximum Burst Size (MBS) Aggregate, Transmit MBS Aggregate. b) The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Transmit MBS CLP 0 Common Name : PARAM4. |
| INT adnAtmAccTrmTagging | 1.3.6.1.4.1.637.3.1.4.37.2.1.37 | INTEGER | read-only | Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, when cells are not conformant, of this Virtual Channel Link (VCL). Common Name : Cell Tagging Option. |
| INT adnAtmAccTrmTrafficDescrType | 1.3.6.1.4.1.637.3.1.4.37.2.1.32 | INTEGER | read-only | The type of a virtual cross-connection (Virtual Path Connection (VPC) and Virtual Channel Connection (VCC)) traffic descriptor in the transmit direction. Depending on the value, the following traffic parameters (defined in the same direction) are initialized: - 'pcrCdv': .PcrAggregate PARAM1 .CdvTol PARAM2 - 'pcrCdvScrMbs': .PcrAggregate PARAM1 .CdvTol PARAM2 .ScrAggregate PARAM3 .MbsAggregate PARAM4 - 'pcrCdvPcr0': .PcrAggregate PARAM1 .CdvTol PARAM2 .PcrClpZero PARAM3 - 'pcrCdvScr0Mbs0': .PcrAggregate PARAM1 .CdvTol PARAM2 .ScrClpZero PARAM3 .MbsClpZero PARAM4 Common name : Traffic Descriptor in the Transmit Direction. |
| OCT adnAtmAccVcDescriptor | 1.3.6.1.4.1.637.3.1.4.37.2.1.48 | OCTET STRING | read-only | This value is a configurable 64 byte identifier for each ATM and FR Permanent Virtual Circuit (PVC). When it is not configured, the accounting and statistical records do not include this object. |
| INT adnAtmBoardASEStatus | 1.3.6.1.4.1.637.3.1.5.15.21.1.2 | INTEGER | read-only | This variable indicates the processor status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for the matrix boards. The bit positions are : 16384 : adnAtmBoardErQRP0RAMP BGQRP-0 chip RAM parity error 65536 : adnAtmBoardErQRP0FIFO BGQRP-0 chip extraction FIFO overflow 131072 : adnAtmBoardErQRP1RAMP BGQRP-1 chip RAM parity error 524288 : adnAtmBoardERQRP1FIFO BGQRP-1 chip extraction FIFO overflow 1048576 : adnAtmBoardErQRP2RAMP BGQRP-2 chip RAM parity error 4194304 : adnAtmBoardErQRP2FIFO BGQRP-2 chip extraction FIFO overflow 8388608 : adnAtmBoardErQRP3RAMP BGQRP-3 chip RAM parity error 33554432 : adnAtmBoardErQRP3FIFO BGQRP-3 chip extraction FIFO overflow 67108864 : adnAtmBoardErHMPLLPC loss of low priority cells 134217728 : adnAtmBoardErHMPLHPC loss of high priority cells 268435456 : adnAtmBoardErHMP0SYNC BGHMP-0 chip synchronization fault 2147483648: adnAtmBoardErHMP1SYNC BGHMP-1 chip synchronization fault N.B.: This variable is significant when the operational state of the processor is enabled. When there is no processor error, this variable has the value 0. |
| INT adnAtmBoardCEMStatus | 1.3.6.1.4.1.637.3.1.5.15.21.1.37 | INTEGER | read-only | This variable indicates the processor status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for CEM8 boards. The bit positions are : 1 : adnAtmBoardErUFOF user FIFO overflow 2 : adnAtmBoardErUFRF user FIFO read failure 4 : adnAtmBoardErNFOF network FIFO overflow 16 : adnAtmBoardErNFRF network FIFO read failure 512 : adnAtmBoardErLIRC0 loss of signal on IRC0 1024 : adnAtmBoardErLIRC1 loss of signal on IRC1 4096 : adnAtmBoardErAPPLIQ applique not present 131072 : adnAtmBoardErDRAMP processor DRAM parity error 2147483648: adnAtmBoardErRFIFF rate reduction FIFO full from ET to AAL1 component N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0. |
| INT adnAtmBoardCIGStatus | 1.3.6.1.4.1.637.3.1.5.15.21.1.3 | INTEGER | read-only | This variable indicates the processor status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for CIG boards. The bit positions are : 1 : adnAtmBoardErUFOF user FIFO overflow 2 : adnAtmBoardErUFRF user FIFO read failure 4 : adnAtmBoardErNFOF network FIFO overflow 8 : adnAtmBoardErPHTRAMP BGPHT chip RAM parity error 16 : adnAtmBoardErNFRF network FIFO read failure 128 : adnAtmBoardErRBOF receipt cell buffer overflow 4096 : adnAtmBoardErAPPLIQ applique not present N.B.: This variable is significant when the operational state of the processor is enabled. When there is no processor error, this variable has the value 0. |
| CTR adnAtmBoardErAPPLIQCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.25 | Counter | read-only | The counter associated with the duration of applique missing. expressed in milliseconds; counter #12 of the ATM core; this counter is not relevant for the matrix board. |
| CTR adnAtmBoardErBGETBCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.30 | Counter | read-only | The counter associated with the number of loss of cell synchronization (BGETB); counter #15 of the ATM core; this counter is only relevant for BBE1B and BBT1B boards. |
| CTR adnAtmBoardErBGMUXCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.31 | Counter | read-only | The counter associated with the number of received start of cell errors from BGMUX; counter #16 of the ATM core; this counter is only relevant for BBE1B and BBT1B boards. |
| adnAtmBoardErCounterEntry | 1.3.6.1.4.1.637.3.1.5.15.21.1 | not-accessible | An entry in the ATM boards error counter table. | |
| adnAtmBoardErCounterTable | 1.3.6.1.4.1.637.3.1.5.15.21 | not-accessible | This table is the ATM boards error counter table. Each counter corresponds to a defect number identified by a bit set in the adnProcessorStatus of the adnProcessorTable. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board. | |
| CTR adnAtmBoardErDCMMECounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.41 | Counter | read-only | The counter associated with the number of downwards cell memory management errors; counter #22 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErDCMOVCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.40 | Counter | read-only | The counter associated with the number of downwards cell memory overflows; counter #21 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErDCSECounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.38 | Counter | read-only | The counter associated with the number of downwards cell synchro errors; counter #18 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErDRAMPCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.35 | Counter | read-only | The counter associated with the number of processor DRAM parity errors; counter #17 of the ATM core; this counter is only relevant for a HBCEx board. |
| CTR adnAtmBoardErDRFOVCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.39 | Counter | read-only | The counter associated with the number of downwards receiving FIFO overflows; counter #19 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErHMP0SYNCCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.15 | Counter | read-only | The counter associated with the number of fault synchronization in the first HMP chip; counter #28 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErHMP1SYNCCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.16 | Counter | read-only | The counter associated with the number of fault synchronization in the second HMP chip; counter #31 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErHMPLHPCCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.14 | Counter | read-only | The counter associated with the number of high priority cells lost due to buffer overflow (FULC); counter #27 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErHMPLLPCCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.13 | Counter | read-only | The counter associated with the number of low priority cells lost due to Selective Cell Discard (SCD); counter #26 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErHOBCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.32 | Counter | read-only | The counter associated with the duration of overflows on high priority output buffer; this counter is not relevant for HSC boards without a high priority output buffer. expressed in milliseconds; counter #18 of the ATM core. |
| CTR adnAtmBoardErLIRC0Counter | 1.3.6.1.4.1.637.3.1.5.15.21.1.26 | Counter | read-only | The counter associated with the number of loss of signal on IRC0; counter #9 of the ATM core; this counter is only relevant for a HSC board. |
| CTR adnAtmBoardErLIRC1Counter | 1.3.6.1.4.1.637.3.1.5.15.21.1.27 | Counter | read-only | The counter associated with the duration of loss of signal on IRC1. expressed in milliseconds; counter #10 of the ATM core; this counter is only relevant for a HSC board. |
| CTR adnAtmBoardErLOBCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.34 | Counter | read-only | The counter associated with the duration of overflows on low priority output buffer; this counter is not relevant for HSC boards without a low priority output buffer; expressed in milliseconds; counter #20 of the ATM core. |
| CTR adnAtmBoardErMOBCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.33 | Counter | read-only | The counter associated with the duration of overflows on medium priority output buffer; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B); expressed in milliseconds; counter #19 of the ATM core. |
| CTR adnAtmBoardErNAVCCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.22 | Counter | read-only | The counter associated with the number of cells received on non active VC; counter #5 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErNAVPCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.23 | Counter | read-only | The counter associated with the number of cells received on non active VP; counter #6 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErNFOFCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.19 | Counter | read-only | The counter associated with the number of network FIFO overflows; counter #2 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErNFRFCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.21 | Counter | read-only | The counter associated with the number of network FIFO read failures; counter #4 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| INT adnAtmBoardErOrWgStatus | 1.3.6.1.4.1.637.3.1.5.15.21.1.1 | INTEGER | read-only | This variable indicates the gravity of a processor failure. It is a bit map represented as a sum. Each bit position maps to the corresponding position in the nominator adnASEBoardStatus, adnCIGBoardStatus or adnHSCBoardStatus (which defines the processor's failure status). The adnAtmBoardErOrWgStatus bit classifies the failure as either an error (value '1') or a warning (value '0'). A bit value of '0' can also mean the failure classification does not apply to the failure status. |
| CTR adnAtmBoardErPHTRAMPCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.20 | Counter | read-only | The counter associated with the number of BGPHT chip RAM parity errors; counter #3 of the ATM core; this counter is not relevant for the matrix board, the HBCEx boards, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErQRP0FIFOCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.6 | Counter | read-only | The counter associated with the number of the first QRP chip extraction FIFO overflows; counter #16 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErQRP0RAMPCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.5 | Counter | read-only | The counter associated with the number of the first QRP chip RAM parity errors; counter #14 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErQRP1FIFOCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.8 | Counter | read-only | The counter associated with the number of the first QRP chip extraction FIFO overflows; counter #19 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErQRP1RAMPCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.7 | Counter | read-only | The counter associated with the number of the second QRD chip RAM parity errors; counter #17 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErQRP2FIFOCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.10 | Counter | read-only | The counter associated with the number of the second QRP chip extraction FIFO overflows; counter #22 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErQRP2RAMPCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.9 | Counter | read-only | The counter associated with the number of the second QRP chip RAM parity errors; counter #20 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErQRP3FIFOCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.12 | Counter | read-only | The counter associated with the number of the third QRP chip extraction FIFO overflows; counter #25 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErQRP3RAMPCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.11 | Counter | read-only | The counter associated with the number of the third QRP chip RAM parity errors; counter #23 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardErRBOFCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.24 | Counter | read-only | The counter associated with the number of reception buffer overflows; counter #7 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErRFIFCCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.29 | Counter | read-only | The counter associated with the number of rate reduction FIFO cell alignment failures; counter #14 of the ATM core; this counter is only relevant for BBE1B and BBT1B boards. |
| CTR adnAtmBoardErRFIFFCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.36 | Counter | read-only | The counter associated with the number of Rate reduction FIFO full events from ET to AAL1 component; counter #31 of the ATM core; this counter is only relevant for a HBCEx board. |
| CTR adnAtmBoardErRFIFOCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.28 | Counter | read-only | The counter associated with the duration of rate reduction FIFO overflows (from ET to LT). expressed in milliseconds; counter #13 of the ATM core; this counter is only relevant for BBE1B and BBT1B boards. |
| CTR adnAtmBoardErRFORRF0Counter | 1.3.6.1.4.1.637.3.1.5.15.21.1.46 | Counter | read-only | The counter associated with the number of rate reduction FIFO overflows on RRF0; counter #32 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErRFORRF1Counter | 1.3.6.1.4.1.637.3.1.5.15.21.1.47 | Counter | read-only | The counter associated with the number of rate reduction FIFO overflows on RRF1; counter #33 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErRFORRF2Counter | 1.3.6.1.4.1.637.3.1.5.15.21.1.48 | Counter | read-only | The counter associated with the number of rate reduction FIFO overflows on RRF2; counter #34 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErUCMMECounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.45 | Counter | read-only | The counter associated with the number of upwards cell memory management errors; counter #26 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErUCMOVCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.44 | Counter | read-only | The counter associated with the number of upwards cell memory overflows; counter #25 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErUCSECounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.42 | Counter | read-only | The counter associated with the number of upwards cell synchro errors; counter #23 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErUFOFCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.17 | Counter | read-only | The counter associated with the number of user FIFO overflows; this counter is not relevant for the matrix board. |
| CTR adnAtmBoardErUFRFCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.18 | Counter | read-only | The counter associated with the number of user FIFO read failures; counter #1 of the ATM core; this counter is not relevant for the matrix board, for the BBTS1C boards and for the BBTP3C boards. |
| CTR adnAtmBoardErURFOVCounter | 1.3.6.1.4.1.637.3.1.5.15.21.1.43 | Counter | read-only | The counter associated with the number of upwards receiving FIFO overflows; counter #24 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards. |
| INT adnAtmBoardHSCStatus | 1.3.6.1.4.1.637.3.1.5.15.21.1.4 | INTEGER | read-only | This variable indicates the processor status.It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for HSC boards, except CEM8 boards. For all HSC boards except BBTS1C and BBTP3C boards, the bit positions are : 1 : adnAtmBoardErUFOF user FIFO overflow 2 : adnAtmBoardErUFRF user FIFO read failure 4 : adnAtmBoardErNFOF network FIFO overflow 8 : adnAtmBoardErPHTRAMP BGPHT chip RAM parity error 16 : adnAtmBoardErNFRF network FIFO read failure 128 : adnAtmBoardErRBOF receipt cell buffer overflow 512 : adnAtmBoardErLIRC0 loss of signal on IRC0 1024 : adnAtmBoardErLIRC1 loss of signal on IRC1 4096 : adnAtmBoardErAPPLIQ applique not present For the BBE1B and BBT1B boards, there are specific defects corresponding to the following bit positions : 8192 : adnAtmBoardErFIFO rate reduction FIFO overflow 16384 : adnAtmBoardErFIFC rate reduction FIFO cell alignment failure 32768 : adnAtmBoardErBGETB loss of cell synchronization 65536 : adnAtmBoardErBGETB upwards start of cell error in BGMUX(or BGMUX 2) For the BBTS1C and BBTP3C boards,the bit positions are : 1 : adnAtmBoardErPHT0FIF0 FIFO defect on PHT2-0 2 : adnAtmBoardErPHT0FIF1 FIFO defect on PHT2-1 4 : adnAtmBoardErPHT0FIF2 FIFO defect on PHT2-2 8 : adnAtmBoardErPHT0FIF3 FIFO defect on PHT2-3 512 : adnAtmBoardErLIRC0 loss of signal on IRC0 1024 : adnAtmBoardErLIRC1 loss of signal on IRC1 4096 : adnAtmBoardErAPPLIQ applique not present 8192 : adnAtmBoardErUFOF user side FIFO overflow 16384 : adnAtmBoardErUFE user side FIFO error 32768 : adnAtmBoardErEFOV extraction FIFO overflow 65636 : adnAtmBoardErQRPPRAMP QRP RAM parity error 131072 : adnAtmBoardErDRAME DRAM ECC error 262144 : adnAtmBoardErDCSE downwards cell syncho error 524288 : adnAtmBoardErDRFOV downwards receiving FIFO overflow 1048576 : adnAtmBoardErRFORRF rate reduction FIFO overflow 2097152 : adnAtmBoardErDCMOV downwards cell memory overflows 4194304 : adnAtmBoardErDCMME downwards cell memory management error 8388608 : adnAtmBoardErUCSE upwards cell synchro error 16777216 : adnAtmBoardErURFOV upwards receiving FIFO overflow 33554432 : adnAtmBoardErUCMOV upwards cell memory overflow 67108864 : adnAtmBoardErUCMME upwards cell memory management error 1342177728: adnAtmBoardErULMA0OV upwards LMA0 overflow N.B.: This variable is significant when the operational state of the processor is enabled. When there is no processor error, this variable has the value 0. |
| adnAtmBoardTraCounterEntry | 1.3.6.1.4.1.637.3.1.5.15.22.1 | not-accessible | An entry in the ATM boards traffic counter table. | |
| adnAtmBoardTraCounterTable | 1.3.6.1.4.1.637.3.1.5.15.22 | not-accessible | This table is the ATM boards traffic counter table. The counter is classified according to the board type.It is specific to the broadband ATM switching element (BBASE) board also called the matrix board. | |
| GAU adnAtmBoardTraFPTMICICounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.3 | Gauge | read-only | The counter associated with the number of free outgoing point-to-multipoint (PTM) internal channel identifiers (ICI); counter #2 of the ATM core; this counter is only relevant for the matrix board. |
| CTR adnAtmBoardTraHMP0ObsCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.1 | Counter | read-only | The counter associated with the number of cells received since the observation threshold is exceeded in the first HMP chip; counter #0 of the ATM core; this counter is only relevant for the matrix board with a HMP release 2 chip. |
| CTR adnAtmBoardTraHMP1ObsCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.2 | Counter | read-only | The counter associated with the number of cells received since the observation threshold is exceeded in the second HMP chip; counter #1 of the ATM core; this counter is only relevant for the matrix board with a HMP release 2 chip. |
| CTR adnAtmBoardTraHOBObsCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.10 | Counter | read-only | The counter associated with the number of observation threshold exceedings on high priority output buffer; counter #39 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip. |
| CTR adnAtmBoardTraLOBEFCICounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.7 | Counter | read-only | The counter associated with the number of Explicit Forward Congestion Indication (EFCI) activations on low priority output buffer; counter #36 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip. |
| CTR adnAtmBoardTraLOBObsCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.12 | Counter | read-only | The counter associated with the number of observation threshold exceedings on low priority output buffer; counter #41 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip. |
| CTR adnAtmBoardTraLOBSCDCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.5 | Counter | read-only | The counter associated with the number of Selective Cell Discard (SCD) activations on low priority output buffer; counter #34 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip. |
| CTR adnAtmBoardTraLOBTPDCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.9 | Counter | read-only | The counter associated with the number of Tail Packet Discard (TPD) activations on low priority outpur buffer; counter #38 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip. |
| CTR adnAtmBoardTraMOBEFCICounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.6 | Counter | read-only | The counter associated with the number of Explicit Forward Congestion Indication (EFCI) activations on medium priority output buffer; counter #35 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip. |
| CTR adnAtmBoardTraMOBObsCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.11 | Counter | read-only | The counter associated with the number of observation threshold exceedings on medium priority output buffer; counter #40 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip. |
| CTR adnAtmBoardTraMOBSCDCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.4 | Counter | read-only | The counter associated with the number of Selective Cell Discard (SCD) activations on medium priority output buffer; counter #33 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip. |
| CTR adnAtmBoardTraMOBTPDCounter | 1.3.6.1.4.1.637.3.1.5.15.22.1.8 | Counter | read-only | The counter associated with the number of Tail Packet Discard (TPD) activations on medium priority output buffer; counter #37 of the ATM core; this counter isis only relevant for a HSC board with BGTOB chip. |
| INT adnAtmCcCauseError | 1.3.6.1.4.1.637.3.1.6.5.19 | INTEGER | not-accessible | Cause of the User to Network Interface (UNI) cross- connection trap currently being sent. Occurs as a variable- binding of an SNMP Trap Packet Data. Unit (PDU). |
| ADN adnAtmCconnectAdminStatus | 1.3.6.1.4.1.637.3.1.6.5.17 | AdnAtmAdminStatus | not-accessible | Value that identifies the administrative status of an ATM cross-connection. |
| NTF adnAtmCconnectDown | 1.3.6.1.4.1.637.3.1.6.3.0.6 | Specifies the cause of the error or warning that occurred on an ATM cross-connection. The ATM cross-connection can be at either VP or VC level. At VP level, the adnAtmVci variable is not significant (equals 0). | ||
| INT adnAtmCconnectIndex | 1.3.6.1.4.1.637.3.1.6.5.16 | INTEGER | not-accessible | Index of the ATM cross-connection. |
| INT adnAtmCconnectLastArea | 1.3.6.1.4.1.637.3.1.6.5.43 | INTEGER | not-accessible | The area number part of adnAtmCconnectLastErrorNodeID. |
| INT adnAtmCconnectLastCanpCause | 1.3.6.1.4.1.637.3.1.6.5.26 | INTEGER | not-accessible | Last Cell Alcatel Network Protocol (CANP) cause. |
| INT adnAtmCconnectLastCause | 1.3.6.1.4.1.637.3.1.6.5.29 | INTEGER | not-accessible | ATM forum cause value in the cause information element. |
| INT adnAtmCconnectLastChassis | 1.3.6.1.4.1.637.3.1.6.5.44 | INTEGER | not-accessible | The chassis number detecting the error. |
| INT adnAtmCconnectLastDiag | 1.3.6.1.4.1.637.3.1.6.5.30 | INTEGER | not-accessible | ATM forum diagnostic value in the cause information element. |
| ADN adnAtmCconnectLastErrorNodeID | 1.3.6.1.4.1.637.3.1.6.5.27 | AdnRoutingID | not-accessible | The identifier of the node detecting the error. |
| INT adnAtmCconnectLastLocation | 1.3.6.1.4.1.637.3.1.6.5.28 | INTEGER | not-accessible | ATM forum location value in the cause information element. |
| INT adnAtmCconnectLastMachine | 1.3.6.1.4.1.637.3.1.6.5.42 | INTEGER | not-accessible | The machine number part of adnAtmCconnectLastErrorNodeID. |
| INT adnAtmCconnectLastSlot | 1.3.6.1.4.1.637.3.1.6.5.45 | INTEGER | not-accessible | The slot number of the board detecting the error. |
| ADN adnAtmCconnectOperStatus | 1.3.6.1.4.1.637.3.1.6.5.18 | AdnAtmUniOperStatus | not-accessible | Value that identifies the current operational status of an ATM cross-connection. |
| NTF adnAtmCconnectUp | 1.3.6.1.4.1.637.3.1.6.3.0.7 | After disappearance of the error or warning, a trap is sent to NMS to indicate the return to a normal state. The ATM cross-connection can be either at VP or VC level. At VP level, the adnAtmVci variable is not significant (0). | ||
| INT adnAtmCellLossTrapCause | 1.3.6.1.4.1.637.3.1.6.5.32 | INTEGER | not-accessible | Variable that gives cause of the ATM Traffic Management trap currently being sent. Occurs as a variable-binding of an SNMP trap. |
| ADN adnAtmCniVcCconnectAdminStatus | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.6 | AdnAtmAdminStatus | read-only | The current administrative status of this Virtual Channel (VC) cross-connection. The 'up' and 'down' states indicate whether or not this ATM VC cross-connection is operational. |
| ADN adnAtmCniVcCconnectDirectedPath | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.10 | AdnAtmDirectedPath | read-only | Whether this Virtual Channel Connection (VCC) uses a directed path. |
| adnAtmCniVcCconnectEntry | 1.3.6.1.4.1.637.3.1.4.37.1.11.1 | not-accessible | An entry in the Cell alcatel Network protocol Interface (CNI) Virtual Channel (VC) cross-connect table. There is one entry for each VC cross-connection on a CNI. | |
| INT adnAtmCniVcCconnectIndex | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.1 | INTEGER | not-accessible | The index of the cross-connection for this Virtual Channel Connection (VCC) on this interface. In a point-to-point cross-connection, the index equals 0. |
| ADN adnAtmCniVcCconnectOperStatus | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.7 | AdnAtmCniOperStatus | read-only | The current Virtual Channel Connection (VCC) call attempt state. |
| INT adnAtmCniVcCconnectOutCcnIndex | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.5 | INTEGER | read-only | The cross-connection index of the Virtual Path Identifier/Virtual Channel Identifier (VPI/VCI) of this node's output interface. This value can be used for call tracing if combined with adnAtmCniVcCconnectOutIfIndex, adnAtmCniVcCconnectOutVpi, and adnAtmCniVcCconnectOutVci. |
| NUM adnAtmCniVcCconnectOutIfIndex | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.2 | InterfaceIndex | read-only | The ifIndex of the output ATM interface from this node. |
| INT adnAtmCniVcCconnectOutVci | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.4 | INTEGER | read-only | The Virtual Channel Identifier (VCI) of this node's output interface. This cross-connection exits this node on another VCI. This value can be combined with adnAtmCniVcCconnectOutIfIndex and adnAtmCniVcCconnectOutVpi and used for call tracing. |
| INT adnAtmCniVcCconnectOutVpi | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.3 | INTEGER | read-only | The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmCniVcCconnectOutIfIndex, this VPI can be used for path tracing. |
| ADN adnAtmCniVcCconnectSourceDest | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.8 | AdnAtmCniSourceDest | read-only | Whether this is the source or destination side of the cross-connection. |
| INT adnAtmCniVcCconnectStatistics | 1.3.6.1.4.1.637.3.1.4.37.1.11.1.9 | INTEGER | read-only | Whether statistics are enabled for this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVclType, is set to 'pvc'; otherwise, the statistics status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. Common Name: Statistics |
| adnAtmCniVcCconnectTable | 1.3.6.1.4.1.637.3.1.4.37.1.11 | not-accessible | The Virtual Channel (VC) cross-connect table for the inter-node ATM interfaces (Cell alcatel Network protocol Interfaces (CNIs)). | |
| ADN adnAtmCniVpCconnectAdminStatus | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.5 | AdnAtmAdminStatus | read-only | The current administrative status of this Virtual Path (VP) cross-connection. The 'up' and 'down' states indicate whether or not this ATM VP cross-connection is operational. |
| ADN adnAtmCniVpCconnectDirectedPath | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.9 | AdnAtmDirectedPath | read-only | Whether this Virtual Path Connection (VPC) uses a directed path. |
| adnAtmCniVpCconnectEntry | 1.3.6.1.4.1.637.3.1.4.37.1.9.1 | not-accessible | An entry in the Cell alcatel Network protocol Interface (CNI) Virtual Path (VP) cross-connect table. There is one entry for each VP cross-connection on a CNI. | |
| INT adnAtmCniVpCconnectIndex | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.1 | INTEGER | not-accessible | The index of the cross-connection for the Virtual Path Connection (VPC) on this interface. In a point-to-point cross-connection, the index equals 0. |
| ADN adnAtmCniVpCconnectOperStatus | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.6 | AdnAtmCniOperStatus | read-only | The current Virtual Path Connection (VPC) call attempt state. |
| INT adnAtmCniVpCconnectOutCcnIndex | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.4 | INTEGER | read-only | The cross-connection index of the output Virtual Path Identifier (VPI) of this node's output ATM interface. This index can be used with adnAtmCniVpCconnectOutIfIndex and adnAtmCniVpCconnectOutVpi for call tracing. |
| NUM adnAtmCniVpCconnectOutIfIndex | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.2 | InterfaceIndex | read-only | The ifIndex of this node's output ATM interface. |
| INT adnAtmCniVpCconnectOutVpi | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.3 | INTEGER | read-only | The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmCniVpCconnectOutIfIndex, this can be used for path tracing. |
| ADN adnAtmCniVpCconnectSourceDest | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.7 | AdnAtmCniSourceDest | read-only | Whether this is the source or destination side of the cross-connection. |
| INT adnAtmCniVpCconnectStatistics | 1.3.6.1.4.1.637.3.1.4.37.1.9.1.8 | INTEGER | read-only | Whether statistics are enabled for this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'; otherwise, the statistics status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. Common Name: Statistics |
| adnAtmCniVpCconnectTable | 1.3.6.1.4.1.637.3.1.4.37.1.9 | not-accessible | The Virtual Path (VP) cross-connect table on the inter-node ATM interfaces (Cell alcatel Network protocol Interfaces (CNIs)). | |
| CTR adnAtmDs3PlcpBip8Counter | 1.3.6.1.4.1.637.3.1.4.37.1.51.1.4 | Counter | read-only | Number of 8-bits interleaved parity (BiP-8) errors. received from the remote equipment. Counter #11 of the ATM core, only available on DS3-PLCP interfaces. |
| adnAtmDs3PlcpEntry | 1.3.6.1.4.1.637.3.1.4.37.1.51.1 | not-accessible | An entry in the ADN DS3 Physical Layer Convergence Protocol (PLCP) extension table. | |
| CTR adnAtmDs3PlcpFebeCounter | 1.3.6.1.4.1.637.3.1.4.37.1.51.1.3 | Counter | read-only | Number of far end block errors (FEBE) received from the remote equipment. Counter #9 of the ATM core, only available on DS3-PLCP interfaces. |
| CTR adnAtmDs3PlcpFerfCounter | 1.3.6.1.4.1.637.3.1.4.37.1.51.1.1 | Counter | read-only | Duration of far end received failure (FERF) received from the remote equipment. FERF is also called remote alarm indication (RAI) or received yellow alarm. Counter #10 of the ATM core, only available on DS3-PLCP interfaces. |
| CTR adnAtmDs3PlcpLofCounter | 1.3.6.1.4.1.637.3.1.4.37.1.51.1.2 | Counter | read-only | Duration of loss-of-frame (LOF). Counter #12 of the ATM core, only available on DS3-PLCP interfaces. |
| CTR adnAtmDs3PlcpOofCounter | 1.3.6.1.4.1.637.3.1.4.37.1.51.1.5 | Counter | read-only | Number of out-of-frame (OOF) events. Counter #20 of the ATM core, only available on DS3-PLCP interfaces. |
| adnAtmDs3PlcpTable | 1.3.6.1.4.1.637.3.1.4.37.1.51 | not-accessible | The ADN DS3 Physical Layer Convergence Protocol (PLCP) extension table. | |
| ADN adnAtmInterfaceAddrRegistration | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.44 | AdnEnableDisabled | read-only | Whether the address registration procedure is enabled. |
| INT adnAtmInterfaceAllowedAtc | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.49 | INTEGER | read-only | Allowed ATM Transfer Capabilities (ATC) for a Virtual Path Connection (VPC) or Virtual Channel Connection (VCC) supported by the ATM interface: - 'anyAtc': The ATM interface is able to support any ATC - 'ubr1Only': The ATM interface can only support Unspecified Bit Rate 1 (UBR1) ATC. |
| INT adnAtmInterfaceBWThreshold1 | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.4 | INTEGER | read-only | The ATM interface's higher bandwidth threshold, used for path selection on the Cell alcatel Network protocol Interface (CNI) to calculate actual available bandwidth. The value, expressed as a percentage, is significant only if this is a CNI; otherwise, it is 0. Common Name: Higher Bandwidth Threshold |
| INT adnAtmInterfaceBWThreshold2 | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.5 | INTEGER | read-only | The ATM interface's medium bandwidth threshold, used for path selection on the Cell alcatel Network protocol Interface (CNI) to calculate actual available bandwidth. The value, expressed as a percentage, is significant only if this is a CNI; otherwise, it is 0. Common Name: Medium Bandwidth Threshold |
| INT adnAtmInterfaceBWThreshold3 | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.6 | INTEGER | read-only | The ATM interface's lower bandwidth threshold, used for path selection on the Cell alcatel Network protocol Interface (CNI) to calculate actual available bandwidth. The value, expressed as a percentage, is significant only if this is a CNI; otherwise, it is 0. Common Name: Lower Bandwidth Threshold |
| ADN adnAtmInterfaceCacAlgorithm | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.34 | AdnEnableDisabled | read-only | Whether Connection Admission Control (CAC) algorithm is enabled on this interface. This nominator doesn't have any impact on the CAC algorithm applied on the AEI associated to this interface. |
| INT adnAtmInterfaceCauseError | 1.3.6.1.4.1.637.3.1.6.5.20 | INTEGER | not-accessible | Cause of the ATM interface error trap. |
| ADN adnAtmInterfaceCharging | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.22 | AdnEnableDisabled | read-only | Whether charging is enabled for all Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface. For the PVCs (VPCs and VCCs) the charging status could be defined per cross-connection. |
| INT adnAtmInterfaceChargingBehaviour | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.43 | INTEGER | read-only | This object indicates the behaviour of the switch when the charging tickets could not be generated for the Virtual Connections (VCs) (Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) supported by this ATM interface: - 'acceptCalls': The new calls are accepted and the established connections are not released - 'refuseCalls': The new calls are refused and the established connections are not released - 'refuseAndReleaseCalls': The new calls are refused and the established connections are released. |
| INT adnAtmInterfaceCniBlockingStatus | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.29 | INTEGER | read-only | The blocking status of the Cell alcatel Network protocol Interface (CNI): - 'available': The CNI can be used to establish new Virtual Path Connections (VPCs) or Virtual Channel Connections (VCCs) - 'blocked': The CNI is not used for establishing new VPCs or VCCs - 'notSignificant': For all ATM interface types except 'physicalCni' and 'routlogicalCni'. Common Name: Blocking Status |
| adnAtmInterfaceConfEntry | 1.3.6.1.4.1.637.3.1.4.37.1.2.1 | not-accessible | An entry in the adnAtmInterfaceConfTable. There is one entry for each ATM interface. | |
| NTF adnAtmInterfaceConfError | 1.3.6.1.4.1.637.3.1.6.3.0.8 | Specifies a configuration inconsistency between two ATM trunks (CNIs). | ||
| adnAtmInterfaceConfTable | 1.3.6.1.4.1.637.3.1.4.37.1.2 | not-accessible | This table is the extension of the atmInterfaceConfTable table, described in RFC 1695. This table contains proprietary ATM interface configuration parameters, one entry per ATM interface. | |
| INT adnAtmInterfaceK | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.35 | INTEGER | read-only | The Connection Admission Control (CAC) overbooking factor, expressed as a percentage, on the ATM interface. |
| ADN adnAtmInterfaceKUbr | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.36 | AdnPercent | read-only | The Connection Admission Control (CAC) overbooking factor, expressed as a percentage, for Unspecified Bit Rate (UBR) connections. |
| NUM adnAtmInterfaceLowLayerIfIndex | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.1 | InterfaceIndex | read-only | The ifIndex of the logical or physical line supporting this ATM interface. The line is considered to be the lower layer of the ATM interface. Common Name: Lower Layer Interface Index |
| INT adnAtmInterfaceMaxActiveVcVpiBits | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.21 | INTEGER | read-only | The maximum number of active Virtual Path Identifier (VPI) bits configured for use on this ATM interface, in Virtual Channel (VC) switch mode. The not significant value is 0. Common Name: Max VPI Bits for VCCs |
| INT adnAtmInterfaceMaxActiveVpVpiBits | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.20 | INTEGER | read-only | The maximum number of active Virtual Path Identifier (VPI) bits configured for use on this ATM interface, in Virtual Path (VP) switch mode. The not significant value is 0. Common Name: Max VPI Bits for VPCs |
| INT adnAtmInterfaceMaxFillingRate | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.3 | INTEGER | read-only | The maximum filling rate on this ATM interface. This value is the percentage of data that can be loaded on the line. For example, if the ifspeed is 100000 Mbits and the maximum filling rate is 80%, the total bandwidth allowed on the line is 80000 Mbits. When the maximum filling rate is reached, no more calls are accepted on the ATM interface. Common Name: Filling Rate (%) |
| INT adnAtmInterfaceMaxPtMCc | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.8 | INTEGER | read-only | The maximum number of point-to-multipoint cross-connections on this ATM interface. Common Name: Max Point-to-Multipoint Cross Connections |
| INT adnAtmInterfaceMaxPtmLeafVcs | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.32 | INTEGER | read-only | The maximum number of point-to-multipoint leaf Virtual Connections (VCs) on this ATM interface. Common Name: Max Point-to-Multipoint Leaf Virtual Connections |
| INT adnAtmInterfaceMaxPtmRootVcs | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.31 | INTEGER | read-only | The maximum number of point-to-multipoint root Virtual Connections (VCs) on this ATM interface. Common Name: Max Point-to-Multipoint Root Virtual Connections |
| INT adnAtmInterfaceMaxPtpVcs | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.7 | INTEGER | read-only | The maximum number of point-to-point Virtual Connections (VCs) (Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) on this ATM interface. Common Name: Max Point-to-Point Virtual Connections |
| INT adnAtmInterfaceMaxPvcc | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.9 | INTEGER | read-only | The maximum number of permanent Virtual Channel Connections (VCCs) on this ATM interface. Common Names: Max Permanent VCCs, Max P-VCCs |
| INT adnAtmInterfaceMaxPVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.13 | INTEGER | read-only | The maximum number of permanent Virtual Path Connections (VPCs) on this ATM interface. Common Names: Max Permanent VPCs, Max P-VPCs |
| INT adnAtmInterfaceMaxSvcc | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.10 | INTEGER | read-only | The maximum number of switched Virtual Channel Connections (VCCs) on this ATM interface. Common Names: Max Switched VCCs, Max S-VCCs |
| INT adnAtmInterfaceMaxSVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.16 | INTEGER | read-only | The maximum number of switched Virtual Path Connections (VPCs) on this ATM interface. Common Names: Max Switched VPCs, Max S-VPCs |
| INT adnAtmInterfaceMaxTDOther | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.42 | INTEGER | read-only | The maximum allowed transit delay for all no delay sensitive Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface. The delay sensitivity of a connection is deduced from the ATM Transfer Capability (ATC) of the link, specified by adnAtmVplTransferCapability and adnAtmVclTransferCapability. For the PVCs (VPCs and VCCs) the maximum allowed transit could be defined per connection. This object is significant only if the interface type is not a Cell alcatel Network protocol Interface (CNI). |
| INT adnAtmInterfaceMaxTDSensitive | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.41 | INTEGER | read-only | The maximum allowed transit delay for all delay sensitive Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface. The delay sensitivity of a connection is deduced from the ATM Transfer Capability (ATC) of the link, specified by adnAtmVplTransferCapability and adnAtmVclTransferCapability. For the PVCs (VPCs and VCCs) the maximum allowed transit delay could be defined per connection. This object is significant only if the interface type is not a Cell alcatel Network protocol Interface (CNI). |
| INT adnAtmInterfaceMaxVcs | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.30 | INTEGER | read-only | The maximum number of Virtual Connections (VCs) (Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs) on this ATM interface. Common Name: Max Virtual Connections |
| INT adnAtmInterfaceMaxVpiForVccs | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.33 | INTEGER | read-only | The maximum number of Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on this ATM interface. |
| INT adnAtmInterfaceMonetaryCost | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.39 | INTEGER | read-only | The monetary cost associated to this ATM interface. This object is significant only if the interface type is a routable Cell alcatel Network protocol Interface (CNI). |
| adnAtmInterfacePerfEntry | 1.3.6.1.4.1.637.3.1.4.37.1.16.1 | not-accessible | An entry in the adnAtmInterfacePerfTable. There is one entry for each ATM interface. | |
| CTR adnAtmInterfacePerfPPtmLeafVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.11 | Counter | read-only | The number of permanent point-to-multipoint leaf Virtual Path Connections (VPCs) on this ATM interface. |
| CTR adnAtmInterfacePerfPPtmRootVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.9 | Counter | read-only | The number of permanent point-to-multipoint root Virtual Path Connections (VPCs) on this ATM interface. |
| CTR adnAtmInterfacePerfPPtpVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.7 | Counter | read-only | The number of permanent point-to-point Virtual Path Connections (VPCs) on this ATM interface. |
| CTR adnAtmInterfacePerfRcvAllocBwVccs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.6 | Counter | read-only | The allocated bandwidth, in the receiving direction, for all Virtual Channel Connections (VCCs) having a Virtual Path Identifier (VPI) with no bandwidth limiation, created on this ATM interface. |
| CTR adnAtmInterfacePerfRcvAllocBwVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.4 | Counter | read-only | The allocated bandwidth, in the receiving direction, for all Virtual Path Connections (VPCs) created on this ATM interface. |
| CTR adnAtmInterfacePerfRcvAllocBwVpiForVcc | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.2 | Counter | read-only | The allocated bandwidth, in the receiving direction, for all Virtual Path Identifiers (VPIs) dedicated to Virtual Channel Connections (VCCs). If all VPIs dedicated to VCCs have no bandwidth limitation (adnAtmVpiVccRcvBandwidth = 0), this counter equals 0. |
| CTR adnAtmInterfacePerfSPtmLeafVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.12 | Counter | read-only | The number of switched point-to-multipoint leaf Virtual Path Connections (VPCs) on this ATM interface. |
| CTR adnAtmInterfacePerfSPtmRootVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.10 | Counter | read-only | The number of switched point-to-multipoint root Virtual Path Connections (VPCs) on this ATM interface. |
| CTR adnAtmInterfacePerfSPtpVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.8 | Counter | read-only | The number of switched point-to-point Virtual Path Connections (VPCs) on this ATM interface. |
| adnAtmInterfacePerfTable | 1.3.6.1.4.1.637.3.1.4.37.1.16 | not-accessible | This table contains counters related to the ATM interface. | |
| CTR adnAtmInterfacePerfTrmAllocBwVccs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.5 | Counter | read-only | The allocated bandwidth, in the transmit direction, for all Virtual Channel Connections (VCCs) having a Virtual Path Identifier (VPI) with no bandwidth limiation, created on this ATM interface. |
| CTR adnAtmInterfacePerfTrmAllocBwVpcs | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.3 | Counter | read-only | The allocated bandwidth, in the transmit direction, for all Virtual Path Connections (VPCs) created on this ATM interface. |
| CTR adnAtmInterfacePerfTrmAllocBwVpiForVcc | 1.3.6.1.4.1.637.3.1.4.37.1.16.1.1 | Counter | read-only | The allocated bandwidth, in the transmit direction, for all Virtual Path Identifiers (VPIs) dedicated to Virtual Channel Connections (VCCs). If all VPIs dedicated to VCCs have no bandwidth limitation (adnAtmVpiVccTrmBandwidth = 0), this counter equals 0. |
| INT adnAtmInterfacePolicing | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.38 | INTEGER | read-only | The status of the policing function applied, in the receiving direction, for all Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface: - 'notPoliced': Police disabled - 'policed': Police enabled - 'supervision': Police disabled, but the police counters are updated. For the PVCs (VPCs and VCCs) the policing function could be defined per cross-connection. Common Name: Policing |
| INT adnAtmInterfacePvpcHighVpi | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.15 | INTEGER | read-only | The high value of the Virtual Path Identifier (VPI) range dedicated to permanent Virtual Path Connections (VPCs) on this ATM interface. Common Name: High VPI Value (P-VPCs) |
| INT adnAtmInterfacePvpcLowVpi | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.14 | INTEGER | read-only | The low value of the Virtual Path Identifier (VPI) range dedicated to permanent Virtual Path Connections (VPCs) on this ATM interface. Common Name: Low VPI Value (P-VPCs) |
| NUM adnAtmInterfaceRemIfIndex | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.28 | InterfaceIndex | read-only | The ifIndex of the remote ATM interface. This is significant only if this is a Cell alcatel Network protocol Interface (CNI). |
| INT adnAtmInterfaceRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.48 | INTEGER | read-only | The area number part of adnAtmInterfaceRemRoutingNodeID. |
| INT adnAtmInterfaceRemNodeMacNum | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.47 | INTEGER | read-only | The machine number part of adnAtmInterfaceRemRoutingNodeID. |
| ADN adnAtmInterfaceRemRoutingNodeID | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.27 | AdnRoutingID | read-only | The remote node identifier. This is significant only if this is a Cell alcatel Network protocol Interface (CNI). |
| INT adnAtmInterfaceSigType | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.26 | INTEGER | read-only | The type of signalling used for the interface: The following three types are allowed for non Tag Distribution Protocol (TDP) interfaces: - 'nonAssociated': An unique signalling Virtual Channel Connection (VCC) is used to control the Virtual Path Connections (VPCs) and VCCs for the interface - 'associated': Several signalling VCCs used. One controls the interface VPCs. There is also a signalling VCC for each Virtual Path Identifier (VPI) value dedicated to Virtual Channel (VC) switching which controls the VCC having the VPI value - 'noSignalling': No signalling VCC used. The following two types are allowed for TDP interfaces only: - 'ipTdp': An unique signalling VCC is used to control the VCCs for the interface. - 'ipTdpCvsi': In addition to a signalling VCC used to control the VCCs for the interface, there is an extra VCC carrying Cisco Virtual Switch Interface (CVSI) messages between the High Speed System (HSS) and the connected 'tdpAccess' acting as a Tag Switch Controller (TSC). Common Name: Signal Type |
| ADN adnAtmInterfaceStatistics | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.23 | AdnEnableDisabled | read-write | Whether statistics are enabled for all Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface. For the PVCs (VPCs and VCCs) the statistics status could be defined per cross-connection. Common Name: Statistics |
| INT adnAtmInterfaceSvcCdvTol | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.45 | INTEGER | read-only | Value of the Cell Delay Variation Tolerance (CDVTOL) for Switched Virtual Connections (SVCs). Value 0 means that the CDVTOL is chosen internally by the switch. Common Names: SVC CDV Tolerance. |
| ADN adnAtmInterfaceSvpcAllocOrd | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.17 | AdnAtmAllocOrder | read-only | The Virtual Path Identifier (VPI) allocation order for switched Virtual Path Connections (VPCs) on this ATM interface. Common Name: VPI Allocation Order (S-VPCs) |
| INT adnAtmInterfaceSvpcHighVpi | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.19 | INTEGER | read-only | The high value of the Virtual Path Identifier (VPI) range dedicated to switched Virtual Path Connections (VPCs) on this ATM interface. Common Name: High VPI Value (S-VPCs) |
| INT adnAtmInterfaceSvpcLowVpi | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.18 | INTEGER | read-only | The low value of the Virtual Path Identifier (VPI) range dedicated to switched Virtual Path Connections (VPCs) on this ATM interface. Common Name: Low VPI Value (S-VPCs) |
| INT adnAtmInterfaceTCCauseError | 1.3.6.1.4.1.637.3.1.6.5.31 | INTEGER | not-accessible | Variable that gives the cause of the ATM interface Transmission/Convergence trap currently being sent. Occurs as a variable-binding of an SNMP trap PDU. |
| NTF adnAtmInterfaceTCErrorBeg | 1.3.6.1.4.1.637.3.1.6.3.0.13 | Indicates that an error or warning has been detected by the Transmission/Convergence (TC) layer of the ATM interface. This error or warning is always confirmed. To be confirmed, an error must occur a designated number of times during a given period of time. | ||
| NTF adnAtmInterfaceTCErrorEnd | 1.3.6.1.4.1.637.3.1.6.3.0.14 | Indicates that a failure has been cleared on the ATM interface. | ||
| INT adnAtmInterfaceTransitDelay | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.40 | INTEGER | read-only | The transit delay configured for this ATM interface. This object is significant only if the interface type is a routable Cell alcatel Network protocol Interface (CNI). |
| ADN adnAtmInterfaceTraps | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.24 | AdnEnableDisabled | read-write | Whether traps are reported to the NMS for this interface. Traps can be reported at ATM interface level, virtual connection level, Signalling ATM Adaptation Layer (SAAL) level and signalling level. Common Name: Traps |
| INT adnAtmInterfaceType | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.2 | INTEGER | read-only | The type of ATM interface: - 'externalUni': On an High Speed Coupler (HSC) line - 'nni': On a HSC line, connected to a Virtual Path (VP) switched network - 'internalUniSig': On a Cell Interconnection Gateway (CIG) internal line used for special connections such as routing, signalling and ILMI - 'virtualUni': Logical interface supporting the Virtual Path Connection (VPC) used to support the logical Cell alcatel Network protocol Interfaces (CNIs) - 'physicalCni': Inter-node physical interface (on a HSC line) - 'routlogicalCni': Routable logical CNI, supported by a logical line (inter-node VPC) - 'nonroutlogicalCni': Non-routable logical CNI, known only by path select - 'nonroutlogicalCniendtoend': Non-routable logical CNI; end-to-end identical to previous one but disallowed for transit Virtual Channel Connections (VCCs) - 'internalUni': On a board internal line (e.g. Circuit Emulation Service (CES) board). - 'tdpAccess': Tag Distribution Protocol (TDP) capable access. It can be a regular Tag Edge Router (TER) or a Tag Switch Controller (TSC). It is supported by an ATM logical line - 'tdpTrunk': TDP capable trunk. It is supported by an ATM logical line. Common Name: Interface Type |
| ADN adnAtmInterfaceUbr1Tagging | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.37 | AdnEnableDisabled | read-write | Whether the switch accepts to treat the Switched Virtual Connections (SVCs) Unspecified Bit Rate (UBR) with no tagging (ubr.1) (specified in the Setup message received) as an UBR connection with tagging (ubr.2). The non significant value is 'disabled'. |
| INT adnAtmInterfaceUserNetFlg | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.25 | INTEGER | read-only | Whether the interface follows the user or network side of the protocol recommendations. Common Names: User or Network Side, User/Network |
| INT adnAtmInterfaceVccHighVpi | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.12 | INTEGER | read-only | The high value of the Virtual Path Identifier (VPI) range dedicated to Virtual Channel (VC) switching on this ATM interface. Common Name: High VPI Value |
| INT adnAtmInterfaceVccLowVpi | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.11 | INTEGER | read-only | The low value of the Virtual Path Identifier (VPI) range dedicated to Virtual Channel (VC) switching on this ATM interface. Common Name: Low VPI Value |
| ADN adnAtmInterfaceVpiForVccAllocOrd | 1.3.6.1.4.1.637.3.1.4.37.1.2.1.46 | AdnAtmAllocOrder | read-only | The allocation order for Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs). |
| adnAtmLogLineEntry | 1.3.6.1.4.1.637.3.1.4.37.1.1.1 | not-accessible | An entry in the adnAtmLogLineTable. There is one entry for each logical line. | |
| adnAtmLogLineTable | 1.3.6.1.4.1.637.3.1.4.37.1.1 | not-accessible | This table describes the logical line supporting the logical inter-node ATM interfaces. | |
| NUM adnAtmLogLineVuniIfIndex | 1.3.6.1.4.1.637.3.1.4.37.1.1.1.1 | InterfaceIndex | read-only | The ifIndex of the Virtual-User Network Interface (V-UNI) associated with this logical line. Common Name: V-UNI ifIndex |
| INT adnAtmLogLineVuniVpi | 1.3.6.1.4.1.637.3.1.4.37.1.1.1.2 | INTEGER | read-only | The Virtual Path Identifier (VPI) on the Virtual-User Network Interface (V-UNI) associated with this logical line. This VPI is unique to this logical line and is used as the logical line number. Common Name: Logical Line |
| adnAtmMIB | 1.3.6.1.4.1.637.3.1.4.37 | |||
| adnAtmMIBObjects | 1.3.6.1.4.1.637.3.1.4.37.1 | |||
| INT adnAtmReachAddrAssocIndex | 1.3.6.1.4.1.637.3.1.4.37.1.14.1.5 | INTEGER | read-only | The index of the list of the associated addresses in the adnAtmReachAssocAddrTable. This object could be significant only if the associated ATM interface support an Interim Inter-switch Signalling Protocol (IISP) link. Not significant value (65535) indicates that there is no associated address in adnAtmReachAssocAddrTable. |
| adnAtmReachAddrEntry | 1.3.6.1.4.1.637.3.1.4.37.1.14.1 | not-accessible | An entry in the adnAtmReachAddrTable. There is one entry for each element of the list. | |
| INT adnAtmReachAddrIndex | 1.3.6.1.4.1.637.3.1.4.37.1.14.1.1 | INTEGER | not-accessible | The index of an element in the list. |
| PHY adnAtmReachAddrNumber | 1.3.6.1.4.1.637.3.1.4.37.1.14.1.4 | PhysAddress | read-only | The prefix address which can be reached through the Interim Inter-switch Signalling Protocol (IISP) link supported by the associated ATM interface or the complete address registered with Interim Local Management Interface (ILMI) or configured if the Multiple Subscriber Number (MSN) service is offered. |
| INT adnAtmReachAddrNumberLength | 1.3.6.1.4.1.637.3.1.4.37.1.14.1.3 | INTEGER | read-only | The number of digits of the prefix address specified in adnAtmReachAddrNumber. If adnAtmReachAddrNumPlan is set to 'private', a digit size is equal to half a byte otherwise it is equal to one byte. |
| ADN adnAtmReachAddrNumPlan | 1.3.6.1.4.1.637.3.1.4.37.1.14.1.2 | AdnAtmNumPlan | read-only | The number plan of the prefix or complete address specified in adnAtmReachAddrNumber. Common Names: Numbering Plan, Num Plan |
| adnAtmReachAddrTable | 1.3.6.1.4.1.637.3.1.4.37.1.14 | not-accessible | This table contains either: - The list of prefix addresses which can be reached through the Interim Inter-switch Signalling Protocol (IISP) link supported by the associated ATM interface. Each prefix entry may be associated with a list of addresses specified in the AdnAtmReachAssocAddrTable - The list of complete addresses registered with Interim Local Management Interface (ILMI) or configured if the Multiple Subscriber Number (MSN) service is offered. | |
| PHY adnAtmReachAssocAddrAddress | 1.3.6.1.4.1.637.3.1.4.37.1.15.1.4 | PhysAddress | read-only | The associated address used to transit through an other network which has not the same number plan. |
| adnAtmReachAssocAddrEntry | 1.3.6.1.4.1.637.3.1.4.37.1.15.1 | not-accessible | An entry in the adnAtmReachAssocAddrTable. There is one entry for each element of each list. | |
| INT adnAtmReachAssocAddrIndex | 1.3.6.1.4.1.637.3.1.4.37.1.15.1.1 | INTEGER | not-accessible | The index of a list in the table. |
| INT adnAtmReachAssocAddrNumIndex | 1.3.6.1.4.1.637.3.1.4.37.1.15.1.2 | INTEGER | not-accessible | The index of an element in a list. |
| ADN adnAtmReachAssocAddrNumPlan | 1.3.6.1.4.1.637.3.1.4.37.1.15.1.3 | AdnAtmNumPlan | read-only | The number plan of the associated address specified by adnAtmReachAssocAddrAddress. Common Names: Numbering Plan, Num Plan |
| adnAtmReachAssocAddrTable | 1.3.6.1.4.1.637.3.1.4.37.1.15 | not-accessible | This table contains all the lists of associated addresses of prefix addresses described in the adnAtmReachAddrTable. | |
| ADN adnAtmSaalAdminStatus | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.14 | AdnAtmAdminStatus | read-only | The current administrative status of this Signalling ATM Adaptation Layer (SAAL) connection. |
| INT adnAtmSaalBandwidth | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.4 | INTEGER | read-only | The bandwidth of the Virtual Channel Connection (VCC) supporting this ATM Adaptation Layer (AAL) connection. |
| INT adnAtmSaalCCTimer | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.8 | INTEGER | read-only | The length (in milliseconds) of the Connection Control (CC) Protocol Data Unit (PDU) timer for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, the CC PDU is resent. |
| INT adnAtmSaalConnectType | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.3 | INTEGER | read-only | The type of the ATM Adaptation Layer (AAL) connection. |
| NTF adnAtmSaalDown | 1.3.6.1.4.1.637.3.1.6.3.0.15 | A problem occured on a Signalling ATM Adaptation Layer (SAAL) connection. This connection is not established. | ||
| adnAtmSaalEntry | 1.3.6.1.4.1.637.3.1.4.37.1.4.1 | not-accessible | An entry in the adnAtmSaalTable. There is one entry for each ATM Adaptation Layer (AAL) connection on an ATM interface. | |
| INT adnAtmSaalIdleTimer | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.12 | INTEGER | read-only | The time interval (in seconds) between transmissions of POLLing (POLL) Protocol Data Units (PDUs) when the connection is no longer in the data transfer phase. |
| INT adnAtmSaalKeepAliveTimer | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.11 | INTEGER | read-only | The amount of time (in milliseconds) allocated for waiting for the STATus (STAT) Protocol Data Unit (PDU) solicited by the final POLLing (POLL) PDU when activity ends on this Signalling ATM Adaptation Layer (SAAL) connection. |
| INT adnAtmSaalMaxCC | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.5 | INTEGER | read-only | The maximum number of times an unacknowledged Connection Control (CC) Protocol Data Unit (PDU) can be resent for this Signalling ATM Adaptation Layer (SAAL) connection. The connection is aborted when this value is exceeded. |
| INT adnAtmSaalMaxLength | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.13 | INTEGER | read-only | The maximum data length of the information field in Protocol Data Units (PDUs) for this Signalling ATM Adaptation Layer (SAAL) connection. |
| INT adnAtmSaalMaxPD | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.6 | INTEGER | read-only | The maximum number of Sequenced Data (SD) Protocol Data Units (PDUs) that can be sent before a polling PDU for this Signalling ATM Adaptation Layer (SAAL) connection. |
| INT adnAtmSaalMaxSTAT | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.7 | INTEGER | read-only | The maximum number of status parameters that can be sent in a STATus (STAT) Protocol Data Unit (PDU) for this Signalling ATM Adaptation Layer (SAAL) connection. The value must be an odd number. |
| INT adnAtmSaalNoRespTimer | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.9 | INTEGER | read-only | The time interval (in seconds) between STATtus (STAT) Protocol Data Units (PDUs) received for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, the connection is aborted. |
| ADN adnAtmSaalOperStatus | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.15 | AdnAtmOperStatus | read-only | The current operational status of this Signalling ATM Adaptation Layer (SAAL) connection. |
| INT adnAtmSaalPollTimer | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.10 | INTEGER | read-only | The time interval (in milliseconds) between transmissions of POLLing (POLL) Protocol Data Units (PDUs) during the data transfer phase for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, a POLL PDU is sent. |
| adnAtmSaalTable | 1.3.6.1.4.1.637.3.1.4.37.1.4 | not-accessible | This table describes the ATM Adaptation Layer (AAL) configuration used in the ATM signalling and routing protocol stacks. | |
| NTF adnAtmSaalUp | 1.3.6.1.4.1.637.3.1.6.3.0.16 | The SAAL connection is established. | ||
| INT adnAtmSaalVci | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.2 | INTEGER | not-accessible | The Virtual Channel Identifier (VCI) value of the Virtual Channel Connection (VCC) for this Signalling ATM Adaptation Layer (SAAL) connection. |
| INT adnAtmSaalVpi | 1.3.6.1.4.1.637.3.1.4.37.1.4.1.1 | INTEGER | not-accessible | The Virtual Path Identifier (VPI) value of the Virtual Channel Connection (VCC) for this Signalling ATM Adaptation Layer (SAAL) connection. |
| ADN adnAtmSigBrSendComp | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.22 | AdnEnableDisabled | read-only | Whether broadband sending complete Information Element (IE) is to be sent (by the switch) systematically in the Setup messages. |
| INT adnAtmSigCallBarring | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.27 | INTEGER | read-only | The call barring service: - 'no': No call barring - 'incoming': Incoming Setup messages (sent by the switch) are not allowed - 'outgoing': Outgoing Setup messages (received by the switch) are not allowed. |
| ADN adnAtmSigCallProc | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.21 | AdnEnableDisabled | read-only | Whether Call proceeding message is to be sent (by the switch) after a Setup message is received. |
| INT adnAtmSigClip | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.28 | INTEGER | read-only | The Calling Line Identification Presentation (CLIP) service implementation. Whether the switch is allowed to update the calling party number and subaddress Information Elements (IEs) in each Setup message sent by the switch to the called subscriber: - 'enabledWithoutOverride': The calling party number IE is transmitted (or inserted if it is not present) in the Setup message sent. If the IE is present in the Setup message received, according to the Presentation Indicator (PI) field value, the address field could be modified by the switch - 'enabledWithOverride': The calling party number IE is transmitted (or inserted if it is not present) in the Setup message sent. If the IE is present in the Setup message received, whatever the PI field value the address field is transmitted in the Setup message sent - 'disabled': The calling party number and subaddress IEs are suppressed in the Setup message sent. |
| ADN adnAtmSigClir | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.29 | AdnAtmSigPIUpdate | read-only | The Calling Line Identification Restriction (CLIR) service implementation. Whether the switch is allowed to update the Presentation Indicator (PI) field of the calling party number Information Element (IE) in each Setup message received (issued from the calling subscriber) and forwarded by the switch to the called subscriber. |
| NTF adnAtmSigCniCheckDown | 1.3.6.1.4.1.637.3.1.6.3.0.17 | A problem occured during the CANP Network Interface (CNI) checking phase of an ATM trunk. | ||
| INT adnAtmSigCniCheckingState | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.35 | INTEGER | read-only | The current status of the validity checking phase which is performed when setting an ATM trunk into service. This read-only nominator is significant only if the associated ATM interface is a trunk. Common Name: CNI validity checking |
| NTF adnAtmSigCniCheckUp | 1.3.6.1.4.1.637.3.1.6.3.0.18 | After disappearance of the error or warning, a trap is sent to NMS to indicate the return to a normal state. | ||
| INT adnAtmSigColp | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.30 | INTEGER | read-only | The COnnected Line identification Presentation (COLP) service implementation. Whether the switch is allowed to update the connected party number and subaddress Information Elements (IEs) in each Connect message received by the switch (issued from the calling subscriber) and forwarded to the called subscriber. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the connected party number and subaddress IEs do not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1. |
| ADN adnAtmSigColr | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.31 | AdnAtmSigPIUpdate | read-only | The COnnected Line identification Restriction (COLR) service implementation. Whether the switch is allowed to update the Presentation Indicator (PI) field of the connected party number Information Element (IE) in each Connect message received (issued from the calling subscriber) and forwarded by the switch to the called subscriber. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the connected party number ans subaddress IEs do not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1. |
| ADN adnAtmSigConnectScreening | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.37 | AdnAtmSigScreening | read-only | Whether the called party number Information Element (IE) of a Connect message is checked according to the administrative address associated with the interface |
| ADN adnAtmSigDdi | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.24 | AdnEnableDisabled | read-only | Whether Direct Dialing In (DDI) service is allowed. |
| adnAtmSigEntry | 1.3.6.1.4.1.637.3.1.4.37.1.5.1 | not-accessible | An entry in the adnAtmSigTable. There is one entry for each Virtual Channel Connection (VCC) controlling an ATM interface. | |
| ADN adnAtmSigMsn | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.25 | AdnEnableDisabled | read-only | Whether Multiple Subscriber Number (MSN) service is allowed. This service is allowed only if adnAtmInterfaceType is 'externalUni'. If the MSN is allowed, the associated addresses are included in adnAtmReachAssocAddrTable. |
| INT adnAtmSigProtocol | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.3 | INTEGER | read-only | The signalling protocol type. |
| INT adnAtmSigSetupAddr | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.36 | INTEGER | read-only | This nominator defines which addressing Information Element (IE) is used by the switch to forward a Setup received. - 'calledPartyNumber': The called party number is used to forward the call, this is the normal case - 'calledPartySubAddress': The called party subaddress is used to forward the call as defined in E191 standard. In this case, the switch replaces the called party number received by the called party subaddress and forwards the call with it. If no called party subaddress is received, the call is rejected - 'both': Depending on the content of the Setup received, the call is forwarded either with the: . called party subaddress (if present in the Setup received) . called party number if the call party subaddress is not present in the Setup received. |
| ADN adnAtmSigSetupScreening | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.23 | AdnAtmSigScreening | read-only | Whether the calling party number Information Element (IE) of a Setup message is checked according to the administrative address associated with the interface |
| ADN adnAtmSigSub | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.32 | AdnEnableDisabled | read-only | Whether SUBaddressing (SUB) service is allowed. Whether the network is allowed to transmit the called subaddress Information Element (IE) in each Setup message forwarded. |
| ADN adnAtmSigSvccReconnect | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.26 | AdnEnableDisabled | read-only | Whether reconnection User Network Interface (UNI) is allowed for switched Virtual Channel Connections (VCCs). |
| INT adnAtmSigT301 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.4 | INTEGER | read-only | The length (in seconds) of the timer started upon receipt of an Alerting message. This timer is stopped upon receipt of a Connect message. When the timer expires, the connection is released. |
| INT adnAtmSigT302 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.5 | INTEGER | read-only | This timer, is not implemented. The length (in seconds) of the timer started upon transmission of a Setup acknowledge message and restarted on the receipt of any Information message not containing a sending complete indication. This timer is stopped upon receipt of any of the following messages: Information message containing a sending complete indication, Alerting, or Connect request message. When the timer expires, a Call proceeding, Alerting or Connect message is sent, as appropriate if sufficient information has been received. |
| INT adnAtmSigT303 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.6 | INTEGER | read-only | The length (in seconds) of the timer started upon transmission of a Setup message. The timer is stopped upon receipt of any of the following messages: Alerting, Connect, Call Proceeding, or Release Complete. The first time this timer expires, the Setup message is resent. The second time it expires, the connection is cleared. |
| INT adnAtmSigT304 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.7 | INTEGER | read-only | This timer is not implemented. The length (in seconds) of the timer started upon receipt of a Setup acknowledge message and restarted when each Information message is sent. This timer is stopped upon receipt of an Alerting, Connect, or Call proceeding message. When the timer expires, the connection is released. |
| INT adnAtmSigT306 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.8 | INTEGER | read-only | This timer is not implemented. The length (in seconds) of the timer started upon transmission of a Release message. This timer is stopped upon receipt of a Release complete message. When this timer expires, a Release complete message is sent. |
| INT adnAtmSigT308 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.9 | INTEGER | read-only | The length (in seconds) of the timer started upon transmission of a Release message. The timer is stopped upon receipt of a Release or Release complete message. The first time this timer expires, the Release message is resent. The second time it expires, the connection is considered as cleared. |
| INT adnAtmSigT309 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.10 | INTEGER | read-only | The length (in seconds) of the timer started upon receipt of a Signalling ATM Adaptation Layer (SAAL) disconnection indication. The timer is stopped upon receipt of a SAAL reconnection indication. If the timer expires, all connections carried by the faulty SAAL connection are released. |
| INT adnAtmSigT310 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.11 | INTEGER | read-only | The length (in seconds) of the timer started upon receipt of a Call proceeding message. The timer is stopped upon receipt of a Connect or Release message. If the timer expires, the connection is released. |
| INT adnAtmSigT313 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.12 | INTEGER | read-only | The length (in seconds) of the timer started upon transmission of a Connect message. The timer is stopped upon receipt of a Connect acknowledge message. If the timer expires, the connection is cleared. This timer is only applicable on the user side of the interface. |
| INT adnAtmSigT316 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.13 | INTEGER | read-only | The length (in seconds) of the timer started upon transmission of a Restart message. The timer is stopped upon receipt of a Restart Acknowledge message. If the timer expires, the Restart message may be resent several times. |
| INT adnAtmSigT317 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.14 | INTEGER | read-only | The length (in seconds) of the timer started upon receipt of a Restart message. The timer is stopped when the internal clearing of called references is completed. If the timer expires, a maintenance message is sent. |
| INT adnAtmSigT322 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.15 | INTEGER | read-only | The length (in seconds) of the timer started upon transmission of a Status enquiry message. The timer is stopped upon receipt of a Status, Release, or Release complete message. If the timer expires, the Status enquiry message may be resent several times. |
| INT adnAtmSigT331 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.18 | INTEGER | read-only | This timer is not implemented. The length (in seconds) of the timer started upon transmission of an Leaf setup request message. The timer is stopped upon receipt of a Setup, Add party, or Leaf setup failure message. The first time this timer expires, the leaf may optionally retransmit the Leaf setup request message. The second time (or the first time if the resent is not chosen) it expires, the connection is cleared. |
| INT adnAtmSigT397 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.19 | INTEGER | read-only | This timer is not implemented. The length (in seconds) of the timer started upon receipt of an Alerting, or Add party alerting message. This timer is stopped upon receipt of an Alerting acknowledge message. When the timer expires, the connection is released. |
| INT adnAtmSigT398 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.16 | INTEGER | read-only | The length (in seconds) of the timer started upon transmission of a Drop party message. The timer is stopped upon receipt of a Drop party acknowledge, Add party reject, or Release message. If the timer expires, the connection is considered as cleared. |
| INT adnAtmSigT399 | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.17 | INTEGER | read-only | The length (in seconds) of the timer started upon transmission of an Add party message. The timer is stopped upon receipt of an Add party acknowledge, Add party reject, or Release message. If the timer expires, the connection is cleared. |
| adnAtmSigTable | 1.3.6.1.4.1.637.3.1.4.37.1.5 | not-accessible | This table describes the signalling entity controlling an ATM interface. | |
| INT adnAtmSigUserNetFlag | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.20 | INTEGER | read-only | Whether the interface follows the user or network side of the protocol recommendations. Common Names: User or Network Side, User/Network |
| ADN adnAtmSigUus | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.33 | AdnEnableDisabled | read-only | Whether User User Signalling (UUS) service is allowed. Whether the subscriber is allowed to insert the UUS Information Element (IE) in the Setup message sent. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the UUS IE does not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1. |
| INT adnAtmSigVci | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.2 | INTEGER | not-accessible | The value of the Virtual Channel Identifier (VCI) for the Virtual Channel Connection (VCC) supporting this signalling entity. |
| INT adnAtmSigVpi | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.1 | INTEGER | not-accessible | The value of the Virtual Path Identifier (VPI) for the Virtual Channel Connection (VCC) supporting this signalling entity. |
| ADN adnAtmSigVpiVciAlloc | 1.3.6.1.4.1.637.3.1.4.37.1.5.1.34 | AdnEnableDisabled | read-only | Whether the VPi and VCi number are inserted in the Setup request message. This object is significant only when the switch follows the network side of the protocol recommendations. This object is significant only if adnAtmSigProtocol is 'atmfv40'. The not significant value is 'disabled'. |
| INT adnAtmTCAlarmState | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.1 | INTEGER | read-only | This variable indicates the state of alarms of the Transmission and Convergence part of ATM layer. It includes information given by atmTCAlarmState. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnAtmTCNoAlarm bit should be set only if no other bit is set. The bit positions and their corresponding ATM core counter numbers # are: # Bit Value ------------------------------------------------------ . 1 adnAtmTCNoAlarm . No alarm present 17 2 adnAtmTCCorrectedHec . Excessive number of cells corrected . through Header Error Control (HEC) 18 4 adnAtmTCUncorrectedHec . Excessive number of cells deleted . through Header Error Control (HEC) 22 8 adnAtmTCUpwardOverflow . Upwards cell buffer overflow 26 16 adnAtmTCDownwardOverflow . Downwards cell buffer overflow 25 32 adnAtmTCLossOfAtmSignalCounter . Loss of ATM signal from the ET part . to the LT part of the board |
| INT adnAtmTCCellRateDecConfig | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.3 | INTEGER | read-only | The type of cell rate decoupling (CRD) mode selected for the ATM TC layer: - unassigned cells (ANSI), - idle cells (ITU), - no CRD for an ATM TC layer over an ATM internal line. Common Name: Cell Rate Decoupling |
| CTR adnAtmTCCorrectedHecCounter | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.6 | Counter | read-only | Number of cells corrected through Header Error Control (HEC) mechanisms. Counter #17 of the ATM core, only available on ATM interfaces over lines on BBTP3C, BBE3B, BBE3B3, BBS1B, BBS1B3, BBS1B2, BBS1B4, BBS4B or BBS4B2 board. |
| CTR adnAtmTCDownwardOverflowCounter | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.9 | Counter | read-only | Number of downward cell buffer (input buffer) overflow events. Counter #26 of the ATM core, only available on ATM-SONET, ATM-SDH, ATM-DS3, and ATM-E3 interfaces. |
| adnAtmTCEntry | 1.3.6.1.4.1.637.3.1.4.37.1.50.1 | not-accessible | An entry in the ADN Transmission Convergence (TC) extension table. | |
| CTR adnAtmTCLossOfAtmSignalCounter | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.10 | Counter | read-only | Duration of loss of ATM signal from the Exchange Termination processor (ET) to the Line Termination processor (LT). Counter #31 of the ATM core, only available on ATM interfaces over lines on BBS1B, BBS1B3, BBS1B2, or BBS1B4 board. |
| CTR adnAtmTCLossOfCellDelCounter | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.5 | Counter | read-only | Duration of loss-of-cell-delineation (LOCD). Counter #16 of the ATM core, only available on ATM-SONET, ATM-SDH, ATM-DS3-DM, ATM-E3, ATM-T1 and ATM-E1 interfaces. |
| INT adnAtmTCMappingConfig | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.4 | INTEGER | read-only | The type of mapping of ATM layer on physical layer: - other mapping : the mapping of the ATM layer is none of the following mappings, - PLCP mapping : the ATM layer is mapped on Physical Layer Convergence Protocol layer (PLCP), - direct mapping : the ATM layer is directly mapped on transmission layer. |
| INT adnAtmTCScramblerConfig | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.2 | INTEGER | read-only | Defines if ATM scrambler is active or not. |
| adnAtmTCTable | 1.3.6.1.4.1.637.3.1.4.37.1.50 | not-accessible | The ADN Transmission Convergence (TC) extension table. | |
| CTR adnAtmTCUncorrectedHecCounter | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.7 | Counter | read-only | Number of cells discarded through Header Error Control (HEC) mechanisms. Counter #18 of the ATM core, only available on ATM-SONET, ATM-SDH, ATM-DS3, ATM-E3, ATM-T1 and ATM-E1 interfaces. |
| CTR adnAtmTCUpwardOverflowCounter | 1.3.6.1.4.1.637.3.1.4.37.1.50.1.8 | Counter | read-only | Number of upward cell buffer (output buffer) overflow events. Counter #22 of the ATM core, only available on ATM interfaces over lines on BBT1B, BBE1B, BBE3B, BBE3B3, BBT3B, BBT3B2, BBT3B3, BBT3B4, BBS1B, BBS1B3, BBS1B2, BBS1B4, BBS4B or BBS4B2 board. |
| INT adnAtmTdpConnCconnectIndex | 1.3.6.1.4.1.637.3.1.5.22.4.1.3 | INTEGER | read-only | The index of the cross-connection for the Virtual Channel Connection (VCC) on this interface. In a point-to-point cross-connection, the index equals zero. In a point-to- -multipoint cross-connection, there is a different index for each leaf. Common Name: Cross Connect Index |
| adnAtmTdpConnEntry | 1.3.6.1.4.1.637.3.1.5.22.4.1 | not-accessible | An entry in the CVSI HSS Connection Table. There is one entry per TDP connection in the HSS. | |
| INT adnAtmTdpConnForwCellRate | 1.3.6.1.4.1.637.3.1.5.22.4.1.10 | INTEGER | read-only | The forward requested cell rate for this connection. This value is configured when the connection is created. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward Cell Rate |
| INT adnAtmTdpConnForwDelay | 1.3.6.1.4.1.637.3.1.5.22.4.1.12 | INTEGER | read-only | The maximum forward delay allowed for this connection. This value is configured when the connection is created. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward Delay |
| INT adnAtmTdpConnForwDelayVariation | 1.3.6.1.4.1.637.3.1.5.22.4.1.13 | INTEGER | read-only | The maximum Cell Delay Variation (CDV) in the forward direction allowed for this connection. This value is configured when the connection is created. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward CDV |
| INT adnAtmTdpConnForwMBS | 1.3.6.1.4.1.637.3.1.5.22.4.1.21 | INTEGER | read-only | The forward maximum burst size (MBS) for this connection. Forward direction is the direction of traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward MBS |
| INT adnAtmTdpConnForwPCR | 1.3.6.1.4.1.637.3.1.5.22.4.1.11 | INTEGER | read-only | The forward peak cell rate (PCR) for the connection. This value is configured when the connection is created. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward PCR |
| INT adnAtmTdpConnForwSCR | 1.3.6.1.4.1.637.3.1.5.22.4.1.20 | INTEGER | read-only | The forward sustainable cell rate (SCR) for this connection. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward SCR |
| ADN adnAtmTdpConnForwServType | 1.3.6.1.4.1.637.3.1.5.22.4.1.24 | AdnCvsiCos | read-only | The forward service type for a connection. It is a value which specifies what class of service has been requested for this connection in forward direction. Forward direction is the direction traffic from the primary to the secondary interface. Common Name: Forward Service Type |
| INT adnAtmTdpConnOutCconnectIndex | 1.3.6.1.4.1.637.3.1.5.22.4.1.8 | INTEGER | read-only | The index of the cross-connection for the Virtual Channel Connection (VCC) on the output ATM interface from this node. In a point-to-point cross-connection, the index equals zero. In a point-to-multipoint cross-connection, there is a different index for each leaf. Common Name: Out Cross Connect Index |
| NUM adnAtmTdpConnOutIfIndex | 1.3.6.1.4.1.637.3.1.5.22.4.1.5 | InterfaceIndex | read-only | The ifIndex of this node's output ATM logical interface. Common Name: Out IfIndex |
| INT adnAtmTdpConnOutVci | 1.3.6.1.4.1.637.3.1.5.22.4.1.7 | INTEGER | read-only | The Virtual Connection Identifier (VCI) of this connection on the output ATM interface from this node. In conjunction with adnAtmTdpConnOutIfIndex, this VCI can be used for path tracing. Common Name: Out VCI |
| INT adnAtmTdpConnOutVpi | 1.3.6.1.4.1.637.3.1.5.22.4.1.6 | INTEGER | read-only | The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmTdpConnOutIfIndex, this VPI can be used for path tracing. Common Name: Out VPI |
| T/F adnAtmTdpConnPriPersEPFlag | 1.3.6.1.4.1.637.3.1.5.22.4.1.18 | TruthValue | read-only | This object reflects the primary Persistent End point flag. This flag indicates that this part of connection is the first leg of a tag distribution protocol (TDP) connection. The first leg of the connection terminates at a tag edge router (TER). Common Name: Primary Endpoint Flag |
| INT adnAtmTdpConnPriSec | 1.3.6.1.4.1.637.3.1.5.22.4.1.4 | INTEGER | read-only | This object tells whether this end of the TDP connection index is Primary or Secondary. Common Name: Pri/Sec |
| INT adnAtmTdpConnRevCellRate | 1.3.6.1.4.1.637.3.1.5.22.4.1.14 | INTEGER | read-only | The reverse requested cell rate for this connection. This value is configured when the connection is created. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse Cell Rate |
| INT adnAtmTdpConnRevDelay | 1.3.6.1.4.1.637.3.1.5.22.4.1.16 | INTEGER | read-only | The maximum reverse delay allowed for this connection. This value is configured when the connection is created. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse Delay |
| INT adnAtmTdpConnRevDelayVariation | 1.3.6.1.4.1.637.3.1.5.22.4.1.17 | INTEGER | read-only | The maximum Cell Delay Variation (CDV) in the reverse direction allowed for this connection. This value is configured when the connection is created. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse CDV |
| INT adnAtmTdpConnRevMBS | 1.3.6.1.4.1.637.3.1.5.22.4.1.23 | INTEGER | read-only | The reverse maximum burst size (MBS) for this connection. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse MBS |
| INT adnAtmTdpConnRevPCR | 1.3.6.1.4.1.637.3.1.5.22.4.1.15 | INTEGER | read-only | The reverse peak cell rate (PCR) for this connection. This value is configured when the connection is created. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse PCR |
| INT adnAtmTdpConnRevSCR | 1.3.6.1.4.1.637.3.1.5.22.4.1.22 | INTEGER | read-only | The Reverse sustainable cell rate (SCR) for this connection. Reverse direction is the direction traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse SCR |
| ADN adnAtmTdpConnRevServType | 1.3.6.1.4.1.637.3.1.5.22.4.1.25 | AdnCvsiCos | read-only | The reverse service type for a connection. It is a value which specifies what class of service has been requested for this connection in reverse direction. Reverse direction is the direction of traffic from the secondary to the primary interface. Common Name: Reverse Service Type |
| T/F adnAtmTdpConnSecPersEPFlag | 1.3.6.1.4.1.637.3.1.5.22.4.1.19 | TruthValue | read-only | This object reflects the secondary Persistent End point flag. This flag indicates that this part of connection is last leg of a tag distribution protocol (TDP) connection. The last leg of the connection terminates into a tag edge router (TER). Common Name: Secondry Endpoint Flag |
| INT adnAtmTdpConnState | 1.3.6.1.4.1.637.3.1.5.22.4.1.9 | INTEGER | read-only | This object provides the state of the connection The following are the possible values it can hold. 1 - Connection Reserved- Created but not activated 2 - Connection Active - Active state Common Name: Conn State |
| adnAtmTdpConnTable | 1.3.6.1.4.1.637.3.1.5.22.4 | not-accessible | This table describes the TDP connections in the HSS. There is one entry per TDP connection in the HSS. | |
| INT adnAtmTdpConnVci | 1.3.6.1.4.1.637.3.1.5.22.4.1.2 | INTEGER | read-only | The VCI of the ATM cross connection for this TDP connection. This is also an index of the table. Common Name: VCI |
| INT adnAtmTdpConnVpi | 1.3.6.1.4.1.637.3.1.5.22.4.1.1 | INTEGER | read-only | The VPI of the ATM cross connection for this TDP connection. This is also an index of the table. Common Name: VPI |
| ADN adnAtmUniVcCconnectAdminStatus | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.6 | AdnAtmAdminStatus | read-write | The current administrative status of this Virtual Channel (VC) cross-connection. The 'up' and 'down' states specify whether or not this ATM VC cross-connection is operational. |
| INT adnAtmUniVcCconnectCauseError | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.25 | INTEGER | read-only | Global cause of the cross-connect failure. |
| INT adnAtmUniVcCconnectCharging | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.22 | INTEGER | read-write | Whether charging is enabled for this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVclType, is set to 'pvc'; otherwise, the charging status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. |
| INT adnAtmUniVcCconnectCumulMonetaryCst | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.24 | INTEGER | read-only | The current cumulative monetary cost of this Virtual Channel (VC) cross-connection. |
| INT adnAtmUniVcCconnectCumulNodes | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.20 | INTEGER | read-only | The number of nodes in the connection. If adnAtmUniVcCconnectOperStatus is 'callup', this is the current nodes count; otherwise, it is the nodes count for the last connection. Common Name: Number of Nodes |
| INT adnAtmUniVcCconnectCumulTD | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.23 | INTEGER | read-only | The current cumulative transit delay of this Virtual Channel (VC) cross-connection. |
| ADN adnAtmUniVcCconnectDirectedPath | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.10 | AdnAtmDirectedPath | read-write | Whether this Virtual Channel Connection (VCC) uses a directed path. |
| adnAtmUniVcCconnectEntry | 1.3.6.1.4.1.637.3.1.4.37.1.10.1 | not-accessible | An entry in the ATM User Network Interface (UNI) Virtual Channel (VC) cross-connect table. There is one entry for each UNI VC cross-connection. An entry describes both the local cross-connection and the end-to-end cross-connection. | |
| INT adnAtmUniVcCconnectErrorNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.34 | INTEGER | read-only | The area number part of adnAtmUniVcCconnectLastErrorNodeID. |
| INT adnAtmUniVcCconnectErrorNodeMacNum | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.33 | INTEGER | read-only | The machine number part of adnAtmUniVcCconnectLastErrorNodeID. |
| INT adnAtmUniVcCconnectFastRetry | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.12 | INTEGER | read-only | This timer specifies the amount of time to wait between failed Permanent Virtual Connection (PVC) setup attempts at the fast rate. After making attempts at this rate the number of times specified by adnAtmUniVcCconnectCRetryAttempts, the rate slows to adnAtmUniVcCconnectSlowRetry. This is significant only if adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is 'pvc', and adnAtmVclModeType is 'automatic'. Common Name: Wait Time between Fast Retries |
| INT adnAtmUniVcCconnectIndex | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.1 | INTEGER | not-accessible | The index of the cross-connection for the Virtual Channel Connection (VCC) on this interface. In a point-to-point cross-connection, the index equals zero. In a point-to- -multipoint cross-connection, there is a different index for each leaf. Common Name: Cross-connection Index |
| INT adnAtmUniVcCconnectLastCanpCause | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.26 | INTEGER | read-only | Last Cell Alcatel Network Protocol (CANP) cause. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVcCconnectLastCause | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.29 | INTEGER | read-only | ATM forum cause value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notsignificant'. |
| INT adnAtmUniVcCconnectLastChassis | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.35 | INTEGER | read-only | The chassis number detecting the error. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVcCconnectLastDiag | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.30 | INTEGER | read-only | ATM forum diagnostic value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notsignificant'. |
| ADN adnAtmUniVcCconnectLastErrorNodeID | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.27 | AdnRoutingID | read-only | The identifier of the node detecting the error. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVcCconnectLastLocation | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.28 | INTEGER | read-only | ATM forum location value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVcCconnectLastSlot | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.36 | INTEGER | read-only | The slot number of the board detecting the error. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVcCconnectMaxTransitDelay | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.21 | INTEGER | read-only | The maximum allowed transit delay of this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVplType, is set to 'pvc'. In case of 'svc', the maximum transit delay is defined per interface or could be defined in an Information Element If set to 0, the value defined per interface is used. |
| ADN adnAtmUniVcCconnectOperStatus | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.7 | AdnAtmUniOperStatus | read-only | The current Virtual Channel Connection (VCC) call attempt state. |
| INT adnAtmUniVcCconnectOutCcnIndex | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.5 | INTEGER | read-only | The cross-connection index of the output Virtual Path Identifier/Virtual Channel Identifier (VPI/VCI) of this node's output interface. This value can be combined with adnAtmUniVcCconnectOutIfIndex, adnAtmUniVcCconnectOutVpi, and adnAtmUniVcCconnectOutVci and used for call tracing. |
| NUM adnAtmUniVcCconnectOutIfIndex | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.2 | InterfaceIndex | read-only | The ifIndex of this node's output ATM interface. |
| INT adnAtmUniVcCconnectOutVci | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.4 | INTEGER | read-only | The Virtual Channel Identifier (VCI) of this node's output interface. This cross-connection exits the node on another VCI. This value can be combined with adnAtmUniVcCconnectOutIfIndex and adnAtmUniVcCconnectOutVpi and used for call tracing. |
| INT adnAtmUniVcCconnectOutVpi | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.3 | INTEGER | read-only | The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmUniVcCconnectOutIfIndex, this VPI can be used for path tracing. |
| STR adnAtmUniVcCconnectPvcDescr | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.37 | DisplayString | read-only | This object contains the Permanent Virtual Connection (PVC) description inserted in each charging ticket generated for this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVclType, is set to 'pvc'. |
| INT adnAtmUniVcCconnectRemCcnIndex | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.18 | INTEGER | read-only | The index value of the current Virtual Channel (VC) cross-connection's remote User Network Interface/Network Network Interface (UNI/NNI). Common Name: Remote UNI Cross-Connection Index |
| INT adnAtmUniVcCconnectRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.32 | INTEGER | read-only | The area number part of adnAtmUniVcCconnectRemRoutingNodeID. |
| INT adnAtmUniVcCconnectRemNodeMacNum | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.31 | INTEGER | read-only | The machine number part of adnAtmUniVpCconnectRemRoutingNodeID. |
| ADN adnAtmUniVcCconnectRemNumPlan | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.14 | AdnAtmNumPlan | read-only | The numbering plan of the remote User Network Interface (UNI) for the current Virtual Channel (VC) cross-connection. Common Names: Remote Numbering Plan, Rem Num Plan |
| PHY adnAtmUniVcCconnectRemPhysAddress | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.15 | PhysAddress | read-only | The address of the current Virtual Channel (VC) cross-connection's remote User Network Interface/Network Network Interface (UNI/NNI). Common Name: Remote Address |
| ADN adnAtmUniVcCconnectRemRoutingNodeId | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.19 | AdnRoutingID | read-only | The identifier of the node connecting the remote User Network Interface/Network Network Interface (UNI/NNI) for the current Virtual Channel (VC) cross-connection. Common Name: Remote Node Identifier |
| INT adnAtmUniVcCconnectRemVci | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.17 | INTEGER | read-only | The Virtual Channel Identifier (VCI) value of the current Virtual Channel (VC) cross-connection's remote User Network Interface/Network Network Interface (UNI/NNI). Common Name: Remote Virtual Channel Identifier (VCI) |
| INT adnAtmUniVcCconnectRemVpi | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.16 | INTEGER | read-only | The Virtual Path Identifier (VPI) of the current Virtual Channel (VC) cross-connection's remote User Network Interface/Network Network Interface (UNI/NNI). Common Name: Remote Virtual Path Identifier (VPI) |
| INT adnAtmUniVcCconnectRetryAttempts | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.11 | INTEGER | read-only | The number of call attempts to make at the fast rate (adnAtmUniVcCconnectFastRetry) before slowing the call attempt rate to adnAtmUniVcCconnectSlowRetry. adnAtmUniVcCconnectOperStatus specifies the current attempt state. This object is significant only if adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is 'pvc', and adnAtmVclModeType is 'automatic'. Common Name: Retry Attempts at Fast Rate |
| INT adnAtmUniVcCconnectSlowRetry | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.13 | INTEGER | read-only | This timer specifies the amount of time to wait between failed Permanent Virtual Connection (PVC) setup attempts at the slow rate. After making attempts at the adnAtmUniVcCconnectFastRetry rate the number of times specified by adnAtmUniVcCconnectRetryAttempts, the rate slows to this rate. This object is significant only if adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is 'pvc', and adnAtmVclModeType is 'automatic'. Common Name: Wait Time between Slow Retries |
| ADN adnAtmUniVcCconnectSourceDest | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.8 | AdnAtmUniSourceDest | read-only | Whether this is the source or destination side of the virtual cross-connection. |
| INT adnAtmUniVcCconnectStatistics | 1.3.6.1.4.1.637.3.1.4.37.1.10.1.9 | INTEGER | read-write | Whether statistics are enabled for this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVclType, is set to 'pvc'; otherwise, the statistics status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. Common Name: Statistics |
| adnAtmUniVcCconnectTable | 1.3.6.1.4.1.637.3.1.4.37.1.10 | not-accessible | The ATM User Network Interface (UNI) Virtual Channel cross-connect table. | |
| ADN adnAtmUniVpCconnectAdminStatus | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.5 | AdnAtmAdminStatus | read-write | The current administrative status of this Virtual Path (VP) cross-connection. The 'up' and 'down' states indicate whether or not this ATM VP cross-connection is operational. |
| INT adnAtmUniVpCconnectCauseError | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.23 | INTEGER | read-only | Global cause of the cross-connect failure. |
| INT adnAtmUniVpCconnectCharging | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.20 | INTEGER | read-write | Whether charging is enabled for this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'; otherwise, the charging status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. |
| INT adnAtmUniVpCconnectCumulMonetaryCst | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.22 | INTEGER | read-only | The current cumulative monetary cost of this Virtual Path (VP) cross-connection. |
| INT adnAtmUniVpCconnectCumulNodes | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.18 | INTEGER | read-only | The number of nodes in the connection. If adnAtmUniVpCconnectOperStatus is 'callup', this is the current nodes count; otherwise, it is the nodes count for the last connection. Common Name: Number of Nodes |
| INT adnAtmUniVpCconnectCumulTD | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.21 | INTEGER | read-only | The current cumulative transit delay of this Virtual Path (VP) cross-connection. |
| ADN adnAtmUniVpCconnectDirectedPath | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.9 | AdnAtmDirectedPath | read-write | Whether this Virtual Path Connection (VPC) uses a directed path. |
| adnAtmUniVpCconnectEntry | 1.3.6.1.4.1.637.3.1.4.37.1.8.1 | not-accessible | An entry in the User Network Interface (UNI) Virtual Path cross-connect table. There is one entry for each User Network Interface/Network Network Interface (UNI/NNI) Virtual Path (VP) cross-connection. An entry describes both the local cross-connection and the end-to-end cross-connection. | |
| INT adnAtmUniVpCconnectErrorNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.32 | INTEGER | read-only | The area number part of adnAtmUniVpCconnectLastErrorNodeID. |
| INT adnAtmUniVpCconnectErrorNodeMacNum | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.31 | INTEGER | read-only | The machine number part of adnAtmUniVpCconnectLastErrorNodeID. |
| INT adnAtmUniVpCconnectFastRetry | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.11 | INTEGER | read-only | This timer specifies the amount of time to wait between failed Permanent Virtual Connection (PVC) setup attempts at the fast rate. After attempting setups at this rate for adnAtmUniVpCconnectCRetryAttempts times, the rate slows to the adnAtmUniVpCconnectSlowRetry rate. This object is significant only if adnAtmUniVpCconnectSourceDest is 'source', adnAtmVplType is 'pvc', and adnAtmVplModeType is 'automatic'. Common Name: Wait Time between Fast Retries |
| INT adnAtmUniVpCconnectIndex | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.1 | INTEGER | not-accessible | The index of the cross-connection for the Virtual Path Connection (VPC) on this interface. The index is 0 for a point-to-point cross-connection. There is a different index for each leaf in a point-to-multipoint cross-connection. Common Name: Cross-connection Index |
| INT adnAtmUniVpCconnectLastCanpCause | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.24 | INTEGER | read-only | Last Cell Alcatel Network Protocol (CANP) cause. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVpCconnectLastCause | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.27 | INTEGER | read-only | ATM forum cause value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVpCconnectLastChassis | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.33 | INTEGER | read-only | The chassis number detecting the error. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVpCconnectLastDiag | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.28 | INTEGER | read-only | ATM forum diagnostic value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'. |
| ADN adnAtmUniVpCconnectLastErrorNodeID | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.25 | AdnRoutingID | read-only | The identifier of the node detecting the error. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVpCconnectLastLocation | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.26 | INTEGER | read-only | ATM forum location value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVpCconnectLastSlot | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.34 | INTEGER | read-only | The slot number of the board detecting the error. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'. |
| INT adnAtmUniVpCconnectMaxHops | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.35 | INTEGER | read-only | The maximum allowed number of hops of this Virtual Path (VP) cross-connection. If set to 65535, the value defined at node level is used. Common Name: Number of hops |
| INT adnAtmUniVpCconnectMaxTransitDelay | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.19 | INTEGER | read-only | The maximum allowed transit delay of this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'. In case of 'svc', the maximum transit delay is defined per interface or could be defined in an Information Element If set to 0, the value defined per interface is used. |
| ADN adnAtmUniVpCconnectOperStatus | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.6 | AdnAtmUniOperStatus | read-only | The current Virtual Path Connection (VPC) call attempt state. |
| INT adnAtmUniVpCconnectOutCcnIndex | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.4 | INTEGER | read-only | The cross-connection index of this output Virtual Path Identifier (VPI) of the output ATM interface from this node. This can be combined with adnAtmUniVpCconnectOutIfIndex and adnAtmUniVpCconnectOutVpi and used for call tracing. |
| NUM adnAtmUniVpCconnectOutIfIndex | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.2 | InterfaceIndex | read-only | The ifIndex of the output ATM interface from this node. |
| INT adnAtmUniVpCconnectOutVpi | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.3 | INTEGER | read-only | The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmUniVpCconnectOutIfIndex, this VPI can be used for path tracing. |
| STR adnAtmUniVpCconnectPvcDescr | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.36 | DisplayString | read-only | This object contains the Permanent Virtual Connection (PVC) description inserted in each charging ticket generated for this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'. |
| INT adnAtmUniVpCconnectRemCcnIndex | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.16 | INTEGER | read-only | The value of the remote User Network Interface/Network Network Interface (UNI/NNI) cross-connection for the current Virtual Path (VP) cross-connection. Common Name: Remote Cross-connection Index |
| INT adnAtmUniVpCconnectRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.30 | INTEGER | read-only | The area number part of adnAtmUniVpCconnectRemRoutingNodeID. |
| INT adnAtmUniVpCconnectRemNodeMacNum | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.29 | INTEGER | read-only | The machine number part of adnAtmUniVpCconnectRemRoutingNodeID. |
| ADN adnAtmUniVpCconnectRemNumPlan | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.13 | AdnAtmNumPlan | read-only | The numbering plan of the remote User Network Interface (UNI) for the current Virtual Path (VP) cross-connection. Common Names: Remote Numbering Plan, Rem Num Plan |
| PHY adnAtmUniVpCconnectRemPhysAddress | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.14 | PhysAddress | read-only | The address of the remote User Network Interface/Network Network Interface (UNI/NNI) for the current Virtual Path (VP) cross-connection. Common Name: Remote Address |
| ADN adnAtmUniVpCconnectRemRoutingNodeId | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.17 | AdnRoutingID | read-only | The identifier of the node connecting the remote User Network Interface/Network Network Interface (UNI/NNI) for the current Virtual Path (VP) cross-connection. Common Name: Remote Node Identifier |
| INT adnAtmUniVpCconnectRemVpi | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.15 | INTEGER | read-only | The Virtual Path Identifier (VPI) of the remote User Network Interface/Network Network Interface (UNI/NNI) for the current Virtual Path (VP) cross-connection. Common Name: Remote VPI |
| INT adnAtmUniVpCconnectRetryAttempts | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.10 | INTEGER | read-only | The number of call attempts to make at the fast rate (adnAtmUniVpCconnectFastRetry) before slowing the call attempt rate to adnAtmUniVpCconnectSlowRetry. The current attempt state is in adnAtmUniVpCconnectOperStatus. This object is significant only if adnAtmUniVpCconnectSourceDest is 'source', adnAtmVplType is 'pvc' and adnAtmVplModeType is 'automatic'. Common Name: Retry Attempts at Fast Rate |
| INT adnAtmUniVpCconnectSlowRetry | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.12 | INTEGER | read-only | This timer specifies the amount of time to wait between failed Permanent Virtual Connection (PVC) setup attempts at the slow rate. After attempting setups at the adnAtmUniVpCconnectFastRetry rate for adnAtmUniVpCconnectRetryAttempts times, the rate slows to the adnAtmUniVpCconnectSlowRetry rate. This is significant only if adnAtmUniVpCconnectSourceDest is 'source', adnAtmVplType is 'pvc', and adnAtmVplModeType is 'automatic'. Common Name: Wait Time between Slow Retries |
| ADN adnAtmUniVpCconnectSourceDest | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.7 | AdnAtmUniSourceDest | read-only | Whether this is the source or destination side of the virtual cross-connection. |
| INT adnAtmUniVpCconnectStatistics | 1.3.6.1.4.1.637.3.1.4.37.1.8.1.8 | INTEGER | read-write | Whether statistics are enabled for this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'; otherwise, the statistics status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. Common Name: Statistics |
| adnAtmUniVpCconnectTable | 1.3.6.1.4.1.637.3.1.4.37.1.8 | not-accessible | The ATM User Network Interface (UNI) Virtual Path cross-connect table. | |
| adnAtmVccDirRoutEntry | 1.3.6.1.4.1.637.3.1.4.37.1.13.1 | not-accessible | An entry in the adnAtmVccDirRoutTable. There is one entry for each element of each list specifing a directed path. | |
| ADN adnAtmVccDirRoutFlag | 1.3.6.1.4.1.637.3.1.4.37.1.13.1.6 | AdnAtmDirRoutFlag | read-only | Whether only the outgoing line specified must be used to reach the next node or not. |
| INT adnAtmVccDirRoutIndex | 1.3.6.1.4.1.637.3.1.4.37.1.13.1.1 | INTEGER | not-accessible | The index of an element in the list of this Virtual Channel Connection (VCC). |
| INT adnAtmVccDirRoutNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.37.1.13.1.8 | INTEGER | read-only | The area number part of adnAtmVccDirRoutNodeID. |
| ADN adnAtmVccDirRoutNodeId | 1.3.6.1.4.1.637.3.1.4.37.1.13.1.2 | AdnRoutingID | read-only | The identifier of the next node to be used to reach the destination node, for this Virtual Channel Connection (VCC). |
| INT adnAtmVccDirRoutNodeMacNum | 1.3.6.1.4.1.637.3.1.4.37.1.13.1.7 | INTEGER | read-only | The machine number part of adnAtmVccDirRoutNodeID. |
| INT adnAtmVccDirRoutOutChassis | 1.3.6.1.4.1.637.3.1.4.37.1.13.1.3 | INTEGER | read-only | The chassis number, within the current node, supporting the line used to reach the next node, specified by adnAtmVccDirRoutNodeId. |
| INT adnAtmVccDirRoutOutLine | 1.3.6.1.4.1.637.3.1.4.37.1.13.1.5 | INTEGER | read-only | The line number, within the current node, used to reach the next node, specified by adnAtmVccDirRoutNodeId. |
| INT adnAtmVccDirRoutOutSlot | 1.3.6.1.4.1.637.3.1.4.37.1.13.1.4 | INTEGER | read-only | The slot number, within the current node, supporting the line used to reach the next node, specified by adnAtmVccDirRoutNodeId. |
| adnAtmVccDirRoutTable | 1.3.6.1.4.1.637.3.1.4.37.1.13 | not-accessible | This table contains the directed path, used to set up point-to-point permanent Virtual Channel Connections (VPCs). A directed path is composed of a list of node identifier and outgoing line identifiers. This table is configured only in the origin node of the cross-connection. The path between the origin and the destination node could be partly or completely described by the list, but it is only used if adnAtmUniVcCconnectDirectedPath is set to 'enabled'. | |
| INT adnAtmVci | 1.3.6.1.4.1.637.3.1.6.5.15 | INTEGER | read-only | Virtual Channel Index (VCI) value on the ATM interface. The not significant value is 0. |
| adnAtmVclEntry | 1.3.6.1.4.1.637.3.1.4.37.1.7.1 | not-accessible | An entry in the VC Link extension table. There is one entry for each VC link. | |
| INT adnAtmVclLogLineType | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.33 | INTEGER | read-only | The type of service using the frame relay logical line: - franpOverAtm: FRANP truncking over ATM - netIWsc2OneToOne: Network interworking scenario 2 with each Fame Relay (FR) connection mapped to a single ATM Virtual Channel Connection (VCC) - netIWsc2ManyToOne: Network interworking scenario 2 with multiple FR connections multiplexed into a single ATM VCC - netIWsc1: Network interworking scenario 1 - serIW: Service interworking - issc: NMS-ISS connection over ATM. Common Name: Logical Line Type |
| INT adnAtmVclModeType | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.24 | INTEGER | read-only | Whether this permanent Virtual Channel Link (VCL) was created automatically by ATM signalling or manually by an operator. Always 'notSignificant' for Switched Virtual Connections (SVC) and InternalVc. Common Name: Creation Mode |
| adnAtmVclPerfEntry | 1.3.6.1.4.1.637.3.1.4.37.1.19.1 | not-accessible | An entry in the adnAtmVclPerfTable. There is one entry for each Virtual Channel Link (VCL). | |
| CTR adnAtmVclPerfRcvCellDiscarded | 1.3.6.1.4.1.637.3.1.4.37.1.19.1.2 | Counter | read-only | The number of cells received on the Virtual Channel Link (VCL) and discarded by the police processing. |
| CTR adnAtmVclPerfRcvCellForwarded | 1.3.6.1.4.1.637.3.1.4.37.1.19.1.1 | Counter | read-only | The number of cells received and forwarded (after police processing) on the Virtual Channel Link (VCL). |
| CTR adnAtmVclPerfRcvCellTagged | 1.3.6.1.4.1.637.3.1.4.37.1.19.1.5 | Counter | read-only | The number of cells received on the Virtual Channel Link (VCL) and tagged by the police processing. This object is significant only if the tagging option is enabled on the VCL. |
| CTR adnAtmVclPerfRcvCellVsaANonConform | 1.3.6.1.4.1.637.3.1.4.37.1.19.1.3 | Counter | read-only | The number of cells received on the Virtual Channel Link (VCL) and declared non conform by the Virtual Scheduling Algorithm (VSA) A of the police processing. This object is significant only if the VSA A is enabled. The VSA A is enabled or not according to the ATM Transfer Capability (ATC) of the VCL. |
| CTR adnAtmVclPerfRcvCellVsaBNonConform | 1.3.6.1.4.1.637.3.1.4.37.1.19.1.4 | Counter | read-only | The number of cells received on the Virtual Channel Link (VCL) and declared non conform by the Virtual Scheduling Algorithm (VSA) B of the police processing. Whatever the ATM Transfer Capability (ATC) of the VCL, the VSA B is always enabled. |
| adnAtmVclPerfTable | 1.3.6.1.4.1.637.3.1.4.37.1.19 | not-accessible | This table contains counters relative to each Virtual Channel Link (VCL). | |
| ADN adnAtmVclPolicing | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.22 | AdnAtmVlPolicing | read-only | The status of the policing function applied, in the receiving direction, of this Virtual Channel Link (VCL). |
| INT adnAtmVclPriority | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.23 | INTEGER | read-only | The Virtual Channel Link (VCL) priority level. Common Name: Priority |
| ADN adnAtmVclRcvAISStatus | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.29 | AdnAtmVlAISStatus | read-only | The Alarm Indication Signal (AIS) end-to-end state, in the receiving direction, of this permanent Virtual Channel Link (VCL). |
| INT adnAtmVclRcvBwWeighting | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.21 | INTEGER | read-only | The weight applied to the allocated bandwidth, expressed as a percentage, in the receiving direction. Common Name: Receive Bandwidth Weighting |
| INT adnAtmVclRcvCdvTol | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.20 | INTEGER | read-only | The Cell Delay Variation (CDV) tolerance of the traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Cell Delay Variation (CDV) Tolerance, Receive CDV Tolerance |
| INT adnAtmVclRcvMbsAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.18 | INTEGER | read-only | The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Maximum Burst Size (MBS) Aggregate, Receive MBS Aggregate |
| INT adnAtmVclRcvMbsClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.19 | INTEGER | read-only | The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Maximum Burst Size (MBS) Cell Priority (CLP) 0, Receive MBS CLP 0 |
| ADN adnAtmVclRcvPacketDiscard | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.32 | AdnEnableDisabled | read-only | Whether packet discard option is enabled, in the receiving direction, of this Virtual Channel Link (VCL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded. |
| INT adnAtmVclRcvPcrAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.14 | INTEGER | read-only | The Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Peak Cell Rate (PCR) Aggregate, Receive PCR Aggregate |
| INT adnAtmVclRcvPcrClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.15 | INTEGER | read-only | The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Receive PCR CLP 0 |
| INT adnAtmVclRcvScrAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.16 | INTEGER | read-only | The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Aggregate, Receive SCR Aggregate |
| INT adnAtmVclRcvScrClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.17 | INTEGER | read-only | The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Receive SCR CLP 0 |
| ADN adnAtmVclRcvTagging | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.31 | AdnEnableDisabled | read-only | Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, when cells are not conformant, of this Virtual Channel Link (VCL). |
| ADN adnAtmVclRcvTrafficDescrType | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.30 | AdnAtmVlTrfDescrType | read-only | The type of Virtual Channel Link (VCL) traffic descriptor in the receiving direction. |
| adnAtmVclTable | 1.3.6.1.4.1.637.3.1.4.37.1.7 | not-accessible | This is an extension of the VC Link table, described in RFC 1695. | |
| INT adnAtmVclTopology | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.1 | INTEGER | read-only | The topology type of this Virtual Channel Link (VCL). Common Name: Topology |
| INT adnAtmVclTrafficDescrType | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.5 | INTEGER | read-only | The type of Virtual Channel Link (VCL) traffic descriptor in the transmit and receiving direction. Depending on the value, certain traffic parameters must be initialized: - 'adnAtmTrafficDescPcrCdv': The following traffic parameters must be initialized: adnAtmVclTrmPcrAggregate, adnAtmVclRcvPcrAggregate, adnAtmVclTrmCdvTol, adnAtmVclRcvCdvTol, adnAtmVclTrmBwWeighting, adnAtmVclRcvBwWeighting, - 'adnAtmTrafficDescPcrCdvScrMbs': The following traffic parameters must be initialized: adnAtmVclTrmPcrAggregate, adnAtmVclRcvPcrAggregate, adnAtmVclTrmScrAggregate, adnAtmVclRcvScrAggregate, adnAtmVclTrmMbsAggregate, adnAtmVclRcvMbsAggregate, adnAtmVclTrmCdvTol, adnAtmVclRcvCdvTol, adnAtmVclTrmBwWeighting, adnAtmVclRcvBwWeighting. Common Name: Traffic Descriptor |
| INT adnAtmVclTrafficType | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.2 | INTEGER | read-only | The type of traffic carried on this Virtual Channel Link (VCL). Common Name: Traffic Type |
| ADN adnAtmVclTransferCapability | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.4 | AdnAtmVlTrfCapability | read-only | The ATM Transfer Capabilities (ATC) offered on this Virtual Channel Link (VCL). |
| ADN adnAtmVclTrmAISStatus | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.25 | AdnAtmVlAISStatus | read-only | The Alarm Indication Signal (AIS) end-to-end state, in the transmit direction, of this permanent Virtual Channel Link (VCL). |
| INT adnAtmVclTrmBwWeighting | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.13 | INTEGER | read-only | The weight applied to the allocated bandwidth, expressed as a percentage, in the transmit direction. Common Name: Transmit Bandwidth Weighting |
| INT adnAtmVclTrmCdvTol | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.12 | INTEGER | read-only | The Cell Delay Variation (CDV) tolerance of the traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Cell Delay Variation (CDV) Tolerance, Transmit CDV Tolerance |
| INT adnAtmVclTrmMbsAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.10 | INTEGER | read-only | The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Maximum Burst Size (MBS) Aggregate, Transmit MBS Aggregate |
| INT adnAtmVclTrmMbsClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.11 | INTEGER | read-only | The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Transmit MBS CLP 0 |
| ADN adnAtmVclTrmPacketDiscard | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.28 | AdnEnableDisabled | read-only | Whether packet discard option is enabled, in the transmit direction, of this Virtual Channel Link (VCL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded. |
| INT adnAtmVclTrmPcrAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.6 | INTEGER | read-only | The Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction (switch point of view), of this Virtual Channel Link (VCL). Common Names: Transmit Peak Cell Rate (PCR) Aggregate, Transmit PCR Aggregate |
| INT adnAtmVclTrmPcrClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.7 | INTEGER | read-only | The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Transmit PCR CLP 0 |
| INT adnAtmVclTrmScrAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.8 | INTEGER | read-only | The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Sustainable Cell Rate (SCR) Aggregate, Transmit SCR Aggregate |
| INT adnAtmVclTrmScrClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.9 | INTEGER | read-only | The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Transmit SCR CLP 0 |
| ADN adnAtmVclTrmTagging | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.27 | AdnEnableDisabled | read-only | Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, when cells are not conformant, of this Virtual Channel Link (VCL). |
| ADN adnAtmVclTrmTrafficDescrType | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.26 | AdnAtmVlTrfDescrType | read-only | The type of Virtual Channel Link (VCL) traffic descriptor in the transmit direction. |
| ADN adnAtmVclType | 1.3.6.1.4.1.637.3.1.4.37.1.7.1.3 | AdnAtmVlType | read-only | The type of this Virtual Channel Link (VCL). Common Name: VCL Type |
| adnAtmVpcDirRoutEntry | 1.3.6.1.4.1.637.3.1.4.37.1.12.1 | not-accessible | An entry in the adnAtmVpcDirRoutTable. There is one entry for each element of each list specifing a directed path. | |
| ADN adnAtmVpcDirRoutFlag | 1.3.6.1.4.1.637.3.1.4.37.1.12.1.6 | AdnAtmDirRoutFlag | read-only | Whether only the outgoing line specified must be used to reach the next node or not. |
| INT adnAtmVpcDirRoutIndex | 1.3.6.1.4.1.637.3.1.4.37.1.12.1.1 | INTEGER | not-accessible | The index of an element in the list of this Virtual Path Connection (VPC). |
| INT adnAtmVpcDirRoutNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.37.1.12.1.8 | INTEGER | read-only | The area number part of adnAtmVpcDirRoutNodeID. |
| ADN adnAtmVpcDirRoutNodeId | 1.3.6.1.4.1.637.3.1.4.37.1.12.1.2 | AdnRoutingID | read-only | The identifier of the next node to be used to reach the destination node, for this Virtual Path Connection (VPC). |
| INT adnAtmVpcDirRoutNodeMacNum | 1.3.6.1.4.1.637.3.1.4.37.1.12.1.7 | INTEGER | read-only | The machine number part of adnAtmVpcDirRoutNodeID. |
| INT adnAtmVpcDirRoutOutChassis | 1.3.6.1.4.1.637.3.1.4.37.1.12.1.3 | INTEGER | read-only | The chassis number, within the current node, supporting the line used to reach the next node, specified by adnAtmVpcDirRoutNodeId. |
| INT adnAtmVpcDirRoutOutLine | 1.3.6.1.4.1.637.3.1.4.37.1.12.1.5 | INTEGER | read-only | The line number, within the current node, used to reach the next node, specified by adnAtmVpcDirRoutNodeId. |
| INT adnAtmVpcDirRoutOutSlot | 1.3.6.1.4.1.637.3.1.4.37.1.12.1.4 | INTEGER | read-only | The slot number, within the current node, supporting the line used to reach the next node, specified by adnAtmVpcDirRoutNodeId. |
| adnAtmVpcDirRoutTable | 1.3.6.1.4.1.637.3.1.4.37.1.12 | not-accessible | This table contains the directed path, used to set up point-to-point permanent Virtual Path Connections (VPCs). A directed path is composed of a list of node identifier and outgoing line identifiers. This table is configured only in the origin node of the cross-connection. The path between the origin and the destination node could be partly or completely described by the list, but it is only used if adnAtmUniVpCconnectDirectedPath is set to 'enabled'. | |
| INT adnAtmVpi | 1.3.6.1.4.1.637.3.1.6.5.14 | INTEGER | read-only | Virtual Path Index (VPI) value on the ATM interface. Always significant. |
| adnAtmVpiVccConfEntry | 1.3.6.1.4.1.637.3.1.4.37.1.3.1 | not-accessible | An entry in the adnAtmVpiVccConfTable. There is one entry for each Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on an ATM interface. | |
| adnAtmVpiVccConfTable | 1.3.6.1.4.1.637.3.1.4.37.1.3 | not-accessible | This table describes the characteristics of the ATM interface's Virtual Path Identifiers (VPIs) dedicated to Virtual Channel Connections (VCCs). | |
| INT adnAtmVpiVccIndex | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.1 | INTEGER | not-accessible | The value of the Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on the ATM interface. |
| INT adnAtmVpiVccMaxFillingRate | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.4 | INTEGER | read-only | The bandwidth filling rate of the Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs). |
| INT adnAtmVpiVccMaxPVccs | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.6 | INTEGER | read-only | The maximum number of permanent Virtual Channel Connections (VCCs) that can be set up on this Virtual Path Identifier (VPI). Common Name: Max P-VCCs on VPI |
| INT adnAtmVpiVccMaxSVccs | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.9 | INTEGER | read-only | The maximum number of switched Virtual Channel Connections (VCCs) that can be set up on this Virtual Path Identifier (VPI). Common Name: Max S-VCCs on VPI |
| INT adnAtmVpiVccMaxVcc | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.5 | INTEGER | read-only | The maximum number of Virtual Channel Connections (VCCs) that can be set up on this Virtual Path Identifier (VPI). Common Name: Max VCCs on VPI |
| adnAtmVpiVccPerfEntry | 1.3.6.1.4.1.637.3.1.4.37.1.17.1 | not-accessible | An entry in the adnAtmVpiVccPerfTable. There is one entry for each Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on an ATM interface. | |
| CTR adnAtmVpiVccPerfPPtmLeafVccs | 1.3.6.1.4.1.637.3.1.4.37.1.17.1.7 | Counter | read-only | The number of permanent point-to-multipoint leaf Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs). |
| CTR adnAtmVpiVccPerfPPtmRootVccs | 1.3.6.1.4.1.637.3.1.4.37.1.17.1.5 | Counter | read-only | The number of permanent point-to-multipoint root Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs). |
| CTR adnAtmVpiVccPerfPPtpVccs | 1.3.6.1.4.1.637.3.1.4.37.1.17.1.3 | Counter | read-only | The number of permanent point-to-point Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs). |
| CTR adnAtmVpiVccPerfRcvAllocBwVccs | 1.3.6.1.4.1.637.3.1.4.37.1.17.1.2 | Counter | read-only | The allocated bandwidth, in the receiving direction, for all Virtual Channel Connections (VCCs).If the VPI dedicated to VCCs has no bandwidth limitation, this counter equals 0 and the allocated bandwidth is accounted in the counter adnAtmInterfacePerfRcvAllocBwVccs. |
| CTR adnAtmVpiVccPerfSPtmLeafVccs | 1.3.6.1.4.1.637.3.1.4.37.1.17.1.8 | Counter | read-only | The number of switched point-to-multipoint leaf Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs). |
| CTR adnAtmVpiVccPerfSPtmRootVccs | 1.3.6.1.4.1.637.3.1.4.37.1.17.1.6 | Counter | read-only | The number of switched point-to-multipoint root Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs). |
| CTR adnAtmVpiVccPerfSPtpVccs | 1.3.6.1.4.1.637.3.1.4.37.1.17.1.4 | Counter | read-only | The number of switched point-to-point Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs). |
| adnAtmVpiVccPerfTable | 1.3.6.1.4.1.637.3.1.4.37.1.17 | not-accessible | This table contains counters related to the Virtual Channel Link (VCL) of each Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on an ATM interface. | |
| CTR adnAtmVpiVccPerfTrmAllocBwVccs | 1.3.6.1.4.1.637.3.1.4.37.1.17.1.1 | Counter | read-only | The allocated bandwidth, in the transmit direction, for all Virtual Channel Connections (VCCs).If the VPI dedicated to VCCs has no bandwidth limitation, this counter equals 0 and the allocated bandwidth is accounted in the counter adnAtmInterfacePerfTrmAllocBwVccs. |
| INT adnAtmVpiVccPvccHighVci | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.8 | INTEGER | read-only | The high value of the Virtual Channel Identifier (VCI) range dedicated to permanent Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI). |
| INT adnAtmVpiVccPvccLowVci | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.7 | INTEGER | read-only | The low value of the Virtual Channel Identifier (VCI) range dedicated to permanent Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI). |
| INT adnAtmVpiVccRcvBandwidth | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.3 | INTEGER | read-only | The bandwidth limitation (if any) of the Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) in the receiving direction. If both adnAtmVpiVccRcvBandwidth and adnAtmVpiVccTrmBandwidth are '0', the bandwidth limitation is the interface bandwidth. |
| ADN adnAtmVpiVccSvccAllocOrd | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.10 | AdnAtmAllocOrder | read-only | The Virtual Channel Identifier (VCI) allocation order for switched Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI). |
| INT adnAtmVpiVccSvccHighVci | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.12 | INTEGER | read-only | The high value of the Virtual Channel Identifier (VCI) range dedicated to switched Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI). |
| INT adnAtmVpiVccSvccLowVci | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.11 | INTEGER | read-only | The low value of the Virtual Channel Identifier (VCI) range dedicated to switched Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI). |
| INT adnAtmVpiVccTrmBandwidth | 1.3.6.1.4.1.637.3.1.4.37.1.3.1.2 | INTEGER | read-only | The bandwidth limitation (if any) of the Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) in the transmit direction. If both adnAtmVpiVccTrmBandwidth and adnAtmVpiVccRcvBandwidth are set to zero, the bandwidth limitation is the interface bandwidth. |
| adnAtmVplEntry | 1.3.6.1.4.1.637.3.1.4.37.1.6.1 | not-accessible | An entry in the extension to the Virtual Path (VP) link table. There is one entry for each VP link. | |
| INT adnAtmVplInternodeType | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.33 | INTEGER | read-only | Whether this Virtual Path Link (VPL) is associated with an internode Virtual Path (VP) connection or not. If it is associated, indicates which traffic type can be supported for Virtual Channel Conections (VCCs) part of the internode VP. - 'notSignificant': VPL is not associated with an internode VP - 'rt': Real time traffic types - 'nrtAggregate': Non-real time traffic types with Quality Of Service (QOS) committment on aggregate traffic (Cell Loss Priority (CLP) 0+1) - 'nrtZero': Non-real time traffic types with QOS committment on CLP 0 traffic - 'u': Unspecified bit rate traffic types - 'anyAtc': Any traffic types. |
| INT adnAtmVplModeType | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.24 | INTEGER | read-only | Whether this permanent Virtual Path Link (VPL) was created automatically by ATM signalling or manually by an operator. Always 'notsignificant' for Switched Virtual Connections (SVC) and InternalVc. Common Name: Creation Mode |
| adnAtmVplPerfEntry | 1.3.6.1.4.1.637.3.1.4.37.1.18.1 | not-accessible | An entry in the adnAtmVplPerfTable. There is one entry for each Virtual Path Link (VPL). | |
| CTR adnAtmVplPerfRcvCellDiscarded | 1.3.6.1.4.1.637.3.1.4.37.1.18.1.2 | Counter | read-only | The number of cells received on the Virtual Path Link (VPL) and discarded by the police processing. |
| CTR adnAtmVplPerfRcvCellForwarded | 1.3.6.1.4.1.637.3.1.4.37.1.18.1.1 | Counter | read-only | The number of cells received and forwarded (after police processing) on the Virtual Path Link (VPL). |
| CTR adnAtmVplPerfRcvCellTagged | 1.3.6.1.4.1.637.3.1.4.37.1.18.1.5 | Counter | read-only | The number of cells received on the Virtual Path Link (VPL) and tagged by the police processing. This object is significant only if the tagging option is enabled on the VPL. |
| CTR adnAtmVplPerfRcvCellVsaANonConform | 1.3.6.1.4.1.637.3.1.4.37.1.18.1.3 | Counter | read-only | The number of cells received on the Virtual Path Link (VPL) and declared non conform by the Virtual Scheduling Algorithm (VSA) A of the police processing. This object is significant only if the VSA A is enabled. The VSA A is enabled or not according to the ATM Transfer Capability (ATC) of the VPL. |
| CTR adnAtmVplPerfRcvCellVsaBNonConform | 1.3.6.1.4.1.637.3.1.4.37.1.18.1.4 | Counter | read-only | The number of cells received on the Virtual Path Link (VPL) and declared non conform by the Virtual Scheduling Algorithm (VSA) B of the police processing. Whatever the ATM Transfer Capability (ATC) of the VPL, the VSA B is always enabled. |
| adnAtmVplPerfTable | 1.3.6.1.4.1.637.3.1.4.37.1.18 | not-accessible | This table contains counters relative to each Virtual Path Link (VPL). | |
| ADN adnAtmVplPolicing | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.22 | AdnAtmVlPolicing | read-only | The status of the policing function applied, in the receiving direction, of this Virtual Path Link (VPL). |
| INT adnAtmVplPriority | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.23 | INTEGER | read-only | The Virtual Path Link (VPL) priority level. Common Name: Priority |
| ADN adnAtmVplRcvAISStatus | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.29 | AdnAtmVlAISStatus | read-only | The Alarm Indication Signal (AIS) end-to-end state, in the receiving direction, of this permanent Virtual Path Link (VPL). |
| INT adnAtmVplRcvBwWeighting | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.21 | INTEGER | read-only | The weight applied to the allocated bandwidth, expressed as a percentage, in the receiving direction. Common Name: Receive Bandwidth Weighting |
| INT adnAtmVplRcvCdvTol | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.20 | INTEGER | read-only | The Cell Delay Variation (CDV) tolerance of the traffic, in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Cell Delay Variation (CDV) Tolerance, Receive CDV Tolerance |
| INT adnAtmVplRcvMbsAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.18 | INTEGER | read-only | The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Maximum Burst Size (MBS) Aggregate, Receive MBS Aggregate |
| INT adnAtmVplRcvMbsClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.19 | INTEGER | read-only | The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Receive MBS CLP 0 |
| ADN adnAtmVplRcvPacketDiscard | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.32 | AdnEnableDisabled | read-only | Whether packet discard option is enabled, in the receiving direction, of this Virtual Path Link (VPL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded. |
| INT adnAtmVplRcvPcrAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.14 | INTEGER | read-only | The Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Peak Cell Rate (PCR) Aggregate, Receive PCR Aggregate |
| INT adnAtmVplRcvPcrClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.15 | INTEGER | read-only | The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Receive PCR CLP 0 |
| INT adnAtmVplRcvScrAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.16 | INTEGER | read-only | The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Sustainable Cell Rate (SCR) Aggregate, Receive SCR Aggregate |
| INT adnAtmVplRcvScrClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.17 | INTEGER | read-only | The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Receive SCR CLP 0 |
| ADN adnAtmVplRcvTagging | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.31 | AdnEnableDisabled | read-only | Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, when cells are not conformant, of this Virtual Path Link (VPL). |
| ADN adnAtmVplRcvTrafficDescrType | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.30 | AdnAtmVlTrfDescrType | read-only | The type of Virtual Path Link (VPL) traffic descriptor in the receiving direction. |
| adnAtmVplTable | 1.3.6.1.4.1.637.3.1.4.37.1.6 | not-accessible | This is an extension of the Virtual Path (VP) link table, described in RFC 1695. | |
| INT adnAtmVplTopology | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.1 | INTEGER | read-only | The topology type of this Virtual Path Link (VPL). Common Name: Topology |
| INT adnAtmVplTrafficDescrType | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.5 | INTEGER | read-only | The type of Virtual Path Link (VPL) traffic descriptor in the transmit and receiving direction. Depending on the value, certain traffic parameters must be initialized: - 'adnAtmTrafficDescPcrCdv': The following traffic parameters must be initialized: adnAtmVplTrmPcrAggregate, adnAtmVplRcvPcrAggregate, adnAtmVplTrmCdvTol, adnAtmVplRcvCdvTol, adnAtmVplTrmBwWeighting, adnAtmVplRcvBwWeighting, - 'adnAtmTrafficDescPcrCdvScrMbs': The following traffic parameters must be initialized: adnAtmVplTrmPcrAggregate, adnAtmVplRcvPcrAggregate, adnAtmVplTrmScrAggregate, adnAtmVplRcvScrAggregate, adnAtmVplTrmMbsAggregate, adnAtmVplRcvMbsAggregate, adnAtmVplTrmCdvTol, adnAtmVplRcvCdvTol, adnAtmVplTrmBwWeighting, adnAtmVplRcvBwWeighting. |
| INT adnAtmVplTrafficType | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.2 | INTEGER | read-only | The type of traffic carried on this Virtual Path Link (VPL). Common Name: Traffic Type |
| ADN adnAtmVplTransferCapability | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.4 | AdnAtmVlTrfCapability | read-only | The ATM Transfer Capabilities (ATC) offered on this Virtual Path Link (VPL). |
| ADN adnAtmVplTrmAISStatus | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.25 | AdnAtmVlAISStatus | read-only | The Alarm Indication Signal (AIS) end-to-end state, in the transmit direction, of this permanent Virtual Path Link (VPL). |
| INT adnAtmVplTrmBwWeighting | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.13 | INTEGER | read-only | The weight applied to the allocated bandwidth, expressed as a percentage, in the transmit direction. Common Name: Transmit Bandwidth Weighting |
| INT adnAtmVplTrmCdvTol | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.12 | INTEGER | read-only | The Cell Delay Variation (CDV) tolerance of the traffic, in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Cell Delay Variation (CDV) Tolerance, Transmit CDV Tolerance |
| INT adnAtmVplTrmMbsAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.10 | INTEGER | read-only | The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1,) in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Maximum Burst Size (MBS) Aggregate, Transmit MBS Aggregate |
| INT adnAtmVplTrmMbsClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.11 | INTEGER | read-only | The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Transmit MBS CLP 0 |
| ADN adnAtmVplTrmPacketDiscard | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.28 | AdnEnableDisabled | read-only | Whether packet discard option is enabled, in the transmit direction, of this Virtual Path Link (VPL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded. |
| INT adnAtmVplTrmPcrAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.6 | INTEGER | read-only | The Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction (switch point of view), of this Virtual Path Link (VPL). Common Names: Transmit Peak Cell Rate (PCR) Aggregate, Transmit PCR Aggregate |
| INT adnAtmVplTrmPcrClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.7 | INTEGER | read-only | The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Transmit PCR CLP 0 |
| INT adnAtmVplTrmScrAggregate | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.8 | INTEGER | read-only | The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Sustainable Cell Rate (SCR) Aggregate, Transmit SCR Aggregate |
| INT adnAtmVplTrmScrClpZero | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.9 | INTEGER | read-only | The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Transmit SCR CLP 0 |
| ADN adnAtmVplTrmTagging | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.27 | AdnEnableDisabled | read-only | Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, when cells are not conformant, of this Virtual Path Link (VPL). |
| ADN adnAtmVplTrmTrafficDescrType | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.26 | AdnAtmVlTrfDescrType | read-only | The type of Virtual Path Link (VPL) traffic descriptor in the transmit direction. |
| ADN adnAtmVplType | 1.3.6.1.4.1.637.3.1.4.37.1.6.1.3 | AdnAtmVlType | read-only | The type of this Virtual Path Link (VPL). Common Name: VPL Type |
| adnAX | 1.3.6.1.4.1.637.3.1.2.4.5 | |||
| adnBbase3 | 1.3.6.1.4.1.637.3.1.2.2.5.1 | |||
| adnBbaseb | 1.3.6.1.4.1.637.3.1.2.2.5.1.1 | |||
| adnBbaseb1 | 1.3.6.1.4.1.637.3.1.2.2.5.1.2 | |||
| adnBbe1b | 1.3.6.1.4.1.637.3.1.2.2.3.4 | |||
| adnBbe3b | 1.3.6.1.4.1.637.3.1.2.2.3.1 | |||
| adnBbe3b3 | 1.3.6.1.4.1.637.3.1.2.2.3.1.1 | |||
| adnBbs1b | 1.3.6.1.4.1.637.3.1.2.2.3.3 | |||
| adnBbs1b2 | 1.3.6.1.4.1.637.3.1.2.2.3.6 | |||
| adnBbs1b3 | 1.3.6.1.4.1.637.3.1.2.2.3.3.1 | |||
| adnBbs1b4 | 1.3.6.1.4.1.637.3.1.2.2.3.6.1 | |||
| adnBbs4b | 1.3.6.1.4.1.637.3.1.2.2.3.11 | |||
| adnBbs4b2 | 1.3.6.1.4.1.637.3.1.2.2.3.12 | |||
| adnBbsyn | 1.3.6.1.4.1.637.3.1.2.2.11.1 | |||
| NTF adnBbsynBoardAlarm | 1.3.6.1.4.1.637.3.1.6.1.0.17 | This trap indicates an alarm from the BBSYN board. | ||
| adnBbt1b | 1.3.6.1.4.1.637.3.1.2.2.3.5 | |||
| adnBbt3b | 1.3.6.1.4.1.637.3.1.2.2.3.2 | |||
| adnBbt3b2 | 1.3.6.1.4.1.637.3.1.2.2.3.7 | |||
| adnBbt3b3 | 1.3.6.1.4.1.637.3.1.2.2.3.2.1 | |||
| adnBbt3b4 | 1.3.6.1.4.1.637.3.1.2.2.3.7.1 | |||
| adnBbtp3c | 1.3.6.1.4.1.637.3.1.2.2.3.14 | |||
| adnBbts1c | 1.3.6.1.4.1.637.3.1.2.2.3.13 | |||
| INT adnBoardAppliqueState | 1.3.6.1.4.1.637.3.1.5.15.2.1.4 | INTEGER | read-only | This indicates the operational state of an applique which is either present or absent or wrong or inaccessible. The value inaccessible is used when the board is absent and its applique can not be detected. |
| ADN adnBoardAppliqueType | 1.3.6.1.4.1.637.3.1.5.15.2.1.3 | AdnAppliqueType | read-only | This indicates the configured applique type. |
| ADN adnBoardApplPluggedType | 1.3.6.1.4.1.637.3.1.5.15.2.1.5 | AdnAppliqueType | read-only | This indicates the type of applique that is plugged in. |
| adnBoardEntry | 1.3.6.1.4.1.637.3.1.5.15.2.1 | not-accessible | An entry in the board table. There is one entry for each board configured. The index corresponds to equipment type 'card' in the adnEquipTable. | |
| INT adnBoardFaultStatus | 1.3.6.1.4.1.637.3.1.5.15.2.1.12 | INTEGER | read-only | For values 1 to 8 : this variable gives details on transitory failures of a CU (Control Unit) card. Other values : this variable gives details on failures on signals from or to a BBSYN card. For the other cards, this variable is not significant; see adnEquipTrapCause to know the reason of the last failure. The value zero indicates that there is no such type of failure. value failure ----- ------------------ 1 : Hardware problem on one LSN link (Local Sub-Network). 2 : At least one partition on this card is desynchronized. 3 : No contact is possible with this card. 4 : Hardware error. 5 : An error occurred during the initialization. 6 : The rebuild has failed. 7 : The rebuild of the card has to be done by the HSS supervision. 8 : Unknown software or firmware version 601 : primary external source recovery 602 : primary external source loss of signal 603 : primary external source qualification failure 604 : primary external source Alarm Indication Signal 605 : primary external source Loss Of Frame 606 : primary external source Excessive Error Indication 607 : primary external source Message failure indication 701 : secondary external source recovery 702 : secondary external source loss of signal 703 : secondary external source qualification failure 801 : primary line timing source recovery 802 : primary line timing source loss of signal 803 : primary line timing source qualification failure 901 : secondary line timing source recovery 902 : secondary line timing source loss of signal 903 : secondary line timing source qualification failure 1001 : partner BBSYN signal recovery 1002 : partner BBSYN loss of signal 1003 : partner BBSYN signal qualification failure 1101 : PDH output enable 1102 : PDH output disable 1201 : SDH output enable 1202 : SDH output disable 1301 : MSC output enable 1302 : MSC output disable. |
| OID adnBoardPluggedType | 1.3.6.1.4.1.637.3.1.5.15.2.1.6 | AutonomousType | read-only | This indicates the type of board that is plugged in. If no board is plugged in, this MIB object value should is set to the OBJECT IDENTIFIER { 0 0 }. |
| INT adnBoardRedundancyFailure | 1.3.6.1.4.1.637.3.1.5.15.2.1.9 | INTEGER | read-only | The value of this object is a bitmap that qualifies the switchover or the switchback failures. When the value of this object is 0, none of the failures is present. For the CU (Control Unit) board, this object is not significant and its value is always zero. bit position failure ------------ ------------------ 0 no failure 1 the primary card is not available for the switchback 2 no spare card is available for the switchover 4 RAB (Redundancy Applique Bus) busy : see adnChassisRABUsage in adnChassisTable 8 the applique switchover from the primary card to the spare card has failed |
| INT adnBoardRedundancyRole | 1.3.6.1.4.1.637.3.1.5.15.2.1.7 | INTEGER | read-only | This indicates the redundancy role of the card. A value of noRedundancy(1) is used for cards that do not support redundancy. Cards that support redundancy, but do not have a spare configured have a value of primary(2). For the CU (Control Unit) board, this object is not significant and its value is always zero. value state ----- ------------------ 0 not significant ( for CU board). 1 this card does not support redundancy. 2 primary : this card can be backed up by another board in case of failure. 3 spare : the card can back up another card in case of failure. |
| INT adnBoardRedundancyStatus | 1.3.6.1.4.1.637.3.1.5.15.2.1.8 | INTEGER | read-only | This indicates the redundancy status of the card. A card that does not support redundancy is considered a primary running for itself. For the CU (Control Unit) board, this object is not significant and its value is always zero. value status ----- ------------------ 0 not significant ( for CU board). 1 this card is a primary running for itself. 2 this card is an idle spare. 3 this card is a spare card running in place of a primary card. 4 a switchover to spare is in progress. 5 a switchback to primary is in progress. 6 the card is a primary card that is not running; a spare is running in its place. |
| INT adnBoardRedundantBind | 1.3.6.1.4.1.637.3.1.5.15.2.1.10 | INTEGER | read-only | For a primary card, this variable indicates the adnEquipIndex of the spare card which backs up this primary card. For a spare card, this variable indicates the adnEquipIndex of the primary card which is backed up by this spare card. The value zero indicates no relationship. For the CU (Control Unit) board, this object is not significant and its value is always zero. |
| INT adnBoardServiceIndicator | 1.3.6.1.4.1.637.3.1.5.15.2.1.13 | INTEGER | read-only | An indication of the services supported by this board. Boards of the same physical type may have different values for this object, depending on the services configured for the board by the NMS operator. The selection of services may also cause different software to be loaded onto the board. For the same physical board type, the software load list (SLL) may contain multiple entries, each qualified using a different value of this object as a selector. Value Meaning ------------------------------------------------------------ notSpecified(1) No specific indication is available. - This value is used for boards with - no service assignment (such as a - board in the 'spare' redundancy - role). - nodeAdmin(2) Node administration and management - services. - atmSwitching(3) ATM switching services. - frAccessAndTrunk(4) Frame relay access and trunk - services. - frxAccess(5) PSX FRX (Frame Relay eXchange) - access service. - frTrunkOverAtm(6) Frame relay trunking over ATM. - frxTrunkOverAtm(7) PSX FRX trunking over ATM. - atmAccessAndTrunk(8) ATM access and trunk services. - frAccessOverAtm(9) Frame relay access over ATM using - Frame Relay Forum (FRF) scenario 1, - scenario 2 and service interworking. - frAccessAndTrunkOverAtm(10) - Frame relay access and trunking - over ATM. The access service uses FRF - network scenario 1, scenario 2 and - service interworking. - circuitEmulation(11) Circuit emulation services. - nodeSync(12) Node-level clock synchronization - services. - ipForwarding(13) IP routing over Frame Relay or ATM. |
| INT adnBoardSwitchCause | 1.3.6.1.4.1.637.3.1.5.15.2.1.11 | INTEGER | read-only | The value of this object gives the reason why the switchover or the switchback has been initiated. This object qualifies the object adnBoardRedundancyFailure. For the CU (Control Unit) board, this object is not significant and its value is always zero. value cause ----- ------------------ 0 not significant ( for CU board) 1 neither switchover nor switchback occurred 2 manual switchover 3 automatic switchover 4 manual switchback 5 semiautomatic switchback 6 automatic switchback |
| adnBoardTable | 1.3.6.1.4.1.637.3.1.5.15.2 | not-accessible | This table is the board table. | |
| INT adnBoardTestResult | 1.3.6.1.4.1.637.3.1.5.15.2.1.14 | INTEGER | read-only | The value of this object gives the hardware tests or rebuild result. For boards other than CU (Control Unit) boards, this object is not significant and its value is always zero. value result ----- ------------------ 0 not significant 1 other result 2 The test or rebuild has been successfuly executed and no problem has been detected 3 Internal error : HSS software error 4 Action aborted : the test or rebuilt has aborted during execution 5 Hardware tests not OK : the hardware tests have been executed but the result is hardware problem. |
| INT adnBrdConfigChassisIndex | 1.3.6.1.4.1.637.3.1.5.12.2.5.1.1 | INTEGER | not-accessible | Index field that identifies the chassis. Chassis are numbered 1-7. The main chassis (i.e., the one with the active Control Unit) in a multi-chassis node is chassis number 1. In a single-chassis node, the chassis number is 1. This number is provided in hardware by a HLCID card which is plugged into the midplane. |
| OCT adnBrdConfigFileName | 1.3.6.1.4.1.637.3.1.5.12.2.5.1.5 | OCTET STRING | read-only | This object identifies the configuration file being used for this board. |
| OCT adnBrdConfigNextFileName | 1.3.6.1.4.1.637.3.1.5.12.2.5.1.6 | OCTET STRING | read-only | This object identifies the next configuration file to be used for this board, if there is an automatic rollback in progress from uncommitted configuration to committed configuration. The value of this object is not significant if there is currently no rollback in progress. |
| INT adnBrdConfigNoCfgOrFullCfg | 1.3.6.1.4.1.637.3.1.5.12.2.5.1.7 | INTEGER | read-only | This object identifies whether a Parameteric File Xfer Interface (PFXI) configuration file exists for this chassis and slot. The values mean: noConfig -- no configuration file fullConfig -- full configuration file deletedConfig -- the board has been deleted. For some board types (such as High Speed Couplers), the configuration parameters are managed entirely by the Control Unit, not by the software running on the board itself. In these cases there will be no configuration file. When a coupler board has been deleted from the uncommitted version, but still exists in the committed version, the value of this object is set to deletedConfig. |
| INT adnBrdConfigOperStatus | 1.3.6.1.4.1.637.3.1.5.12.2.5.1.3 | INTEGER | read-only | This object notifies the NMS of the results of the last command, or whether it is still in progress. |
| INT adnBrdConfigSlotIndex | 1.3.6.1.4.1.637.3.1.5.12.2.5.1.2 | INTEGER | not-accessible | Index field that identifies the slot. Slots within a chassis are numbered 1-12. The first slot on the left when facing the front of the chassis is number 1. This number is provided in hardware through hard-wiring on the midplane. Note that the HBSAC board always has a special slot identifier of 30, but this slot number is never used. |
| INT adnBrdConfigState | 1.3.6.1.4.1.637.3.1.5.12.2.5.1.4 | INTEGER | read-only | This object notifies the NMS of the `state' of configuration update processing. The values mean: committed -- This board is not currently loading configuration tables. Its configuration tables are from the committed version. actInProgWaitingForLoadInd -- An Activate command is in progress. For this board, the state machine is waiting for an indication that all requests to load tables have been received, so that the loading can begin. actInProgMiddleTransaction -- An Activate command is in progress, and for this board, the state machine is waiting for the response to a middle message within a configuration transaction. actInProgEndTransaction -- An Activate command is in progress, and for this board, the state machine is waiting for the response to a null message that signals the end of a configuration transaction. uncommitted -- This board is using uncommitted configuration tables. loadingCommittedNextFile -- This board is in the process of loading uncommitted configuration tables. The state machine is waiting for a response to a null message that signals the end of a transaction, and will then send the next configuration file, which will be the rollback file. loadingCommittedMiddleTrans -- This board is in the process of loading committed configuration tables. The state machine is waiting for a response to a middle message within the configuration transaction. loadingCommittedEndTrans -- This board is in the process of loading committed configuration tables. The state machine is waiting for a response to a null message that signals the end of a transaction. pending -- An Activate command is in progress, and this board is currently down. When the board comes up, it will be loaded with the uncommitted configuration file. |
| adnBrdConfigUpdateCntlEntry | 1.3.6.1.4.1.637.3.1.5.12.2.5.1 | not-accessible | An entry in the board configuration portion of the Update Control table. | |
| adnBrdConfigUpdateCntlTable | 1.3.6.1.4.1.637.3.1.5.12.2.5 | not-accessible | The board configuration portion of the Update Control table contains objects for board configuration operational status between the HSS and the NMS. | |
| INT adnBrdFlashBuildErrorCode | 1.3.6.1.4.1.637.3.1.6.5.69 | INTEGER | not-accessible | This object identifies a specific error for flash build. flashVolumeWriteError - an error occured while creating or writing the flash volume file on the Control Unit. This may be a disk space problem. openDescriptionFileError - the flash description file can not be opened. This may be due to a permission problem or to the absence of this file on the Control Unit. descriptionFileSyntaxError - there is some syntax error within the description file. flashComponentFileMissing - a file to be gathered in the flash volume can not be found on the Control Unit. nectarFileManagementError - a Nectar File Management error occured. otherError - any error other than the above ones. |
| INT adnBrdFlashChassisIndex | 1.3.6.1.4.1.637.3.1.5.12.2.6.1.1 | INTEGER | not-accessible | Index field that identifies the chassis. Chassis are numbered 1-7. The main chassis (i.e., the one with the active Control Unit) in a multi-chassis node is chassis number 1. In a single-chassis node, the chassis number is 1. This number is provided in hardware by a HLCID card which is plugged into the midplane. |
| adnBrdFlashContentListEntry | 1.3.6.1.4.1.637.3.1.5.12.2.6.1 | not-accessible | An entry in the board flash content portion of the Update Control table. | |
| adnBrdFlashContentListTable | 1.3.6.1.4.1.637.3.1.5.12.2.6 | not-accessible | The board flash content list is a portion of the Update Control group which contains information about the contents of a board's flash memory. | |
| INT adnBrdFlashSize | 1.3.6.1.4.1.637.3.1.5.12.2.6.1.3 | INTEGER | read-only | This object identifies the coupler board flash size in megabytes. |
| INT adnBrdFlashSlotIndex | 1.3.6.1.4.1.637.3.1.5.12.2.6.1.2 | INTEGER | not-accessible | Index field that identifies the slot. Slots within a chassis are numbered 1-12. The first slot on the left when facing the front of the chassis is number 1. This number is provided in hardware through hard-wiring on the midplane. Note that the HBSAC board always has a special slot identifier of 30, but this slot number is never used. |
| INT adnBrdFlashUpdateErrorCode | 1.3.6.1.4.1.637.3.1.6.5.68 | INTEGER | not-accessible | This object identifies a specific error for flash update. Values are: msupTimeout - on-line flash update failed due to a Main Supervisor timeout. flashWriteError - on-line flash update failed due to a flash write error. offlineFlashUpdateError - off-line flash update failed. |
| STR adnBrdFlashVolume1 | 1.3.6.1.4.1.637.3.1.5.12.2.6.1.4 | DisplayString | read-only | This object identifies the flash image file name loaded in the first volume of coupler flash. |
| STR adnBrdFlashVolume2 | 1.3.6.1.4.1.637.3.1.5.12.2.6.1.5 | DisplayString | read-only | This object identifies the flash image file name loaded in the second volume of coupler flash. |
| STR adnBrdFlashVolume3 | 1.3.6.1.4.1.637.3.1.5.12.2.6.1.6 | DisplayString | read-only | This object identifies the flash image file name loaded in the third volume of coupler flash. |
| STR adnBrdFlashVolume4 | 1.3.6.1.4.1.637.3.1.5.12.2.6.1.7 | DisplayString | read-only | This object identifies the flash image file name loaded in the fourth volume of coupler flash. |
| INT adnbroadcastLSU | 1.3.6.1.4.1.637.3.1.5.8.2.1.2 | INTEGER | read-write | If active, a trigger for a one shot link state update broadcast for this node. The status is reset to inactive when done. |
| adnCalcCtlEntry | 1.3.6.1.4.1.637.3.1.5.8.22.1 | not-accessible | Each entry (row) of the adnCalcCtlTable provides the general parameters used by the routing services for node-to-path table calculation for a specific type of service and criterion. Note that there are 3 metric types known in R 2.2. Additional metric types may be added at the end of the entry, as future requirements dictate. | |
| adnCalcCtlTable | 1.3.6.1.4.1.637.3.1.5.8.22 | not-accessible | General parameters used by the routing services for node-to-path table calculation. | |
| adnCalcMonEntry | 1.3.6.1.4.1.637.3.1.5.8.1.1 | not-accessible | Each entry (row) of the adnCalcMonTable provides the general parameters used by ' the routing services for node-to-path table calculation for a specific type of service and criterion. | |
| adnCalcMonTable | 1.3.6.1.4.1.637.3.1.5.8.1 | not-accessible | General parameters used by the routing services for node-to-path table calculation. | |
| adnCard | 1.3.6.1.4.1.637.3.1.2.2 | |||
| adnCbs | 1.3.6.1.4.1.637.3.1.2.2.9.2 | |||
| adnCbx | 1.3.6.1.4.1.637.3.1.2.2.9.7 | |||
| adnCES | 1.3.6.1.4.1.637.3.1.5.20 | |||
| NTF adnCESBufferUnderBegin | 1.3.6.1.4.1.637.3.1.6.3.0.19 | This TRAP indicates that a cell starvation condition, confirmed after a persistency check, has begun on the Circuit Emulation Service connection. A cell starvation condition means that no more ATM cells are received on the ATM connection supporting the Circuit Emulation Service connection which means an underflow in the received cells buffer The persistency check consists in waiting a certain time (default value is 2.5 s) before sending the alarm | ||
| NTF adnCESBufferUnderEnd | 1.3.6.1.4.1.637.3.1.6.3.0.20 | This TRAP indicates that a cell starvation condition has ended on the Circuit Emulation Service connection. A cell starvation condition means that no more ATM cells are received on the ATM connection supporting the Circuit Emulation Service connection which means an underflow in the received cells buffer | ||
| INT adnCESClockMode | 1.3.6.1.4.1.637.3.1.5.20.1.1.1 | INTEGER | read-write | It defines the synchronization mode associated to the Circuit Emulation Service connection: - use the value defined in atmfCESCbrClockMode - loop timing: proprietary mode used when the line is in loop timing mode |
| INT adnCESCondSignal | 1.3.6.1.4.1.637.3.1.5.20.1.1.3 | INTEGER | read-write | It specifies the pattern to be sent in the signalling nibble (ABCD bits of CAS signalling) when trunk conditioning (fault condition) on Constant Bit Rate interface is activated. It only applies to structured data transfer service. |
| adnCESConfEntry | 1.3.6.1.4.1.637.3.1.5.20.1.1 | not-accessible | Extra parameters for describing a Circuit Emulation Service connection. | |
| adnCESConfTable | 1.3.6.1.4.1.637.3.1.5.20.1 | not-accessible | A list of extra parameters associated to a Circuit Emulation Service connection. | |
| INT adnCESTrunkCondData | 1.3.6.1.4.1.637.3.1.5.20.1.1.2 | INTEGER | read-write | It specifies the pattern to be sent in the data timeslot when trunk conditioning (fault condition) on Constant Bit Rate interface is activated. It only applies to structured data transfer service. |
| INT adnCESUpDownTrapEnable | 1.3.6.1.4.1.637.3.1.5.20.1.1.4 | INTEGER | read-write | It indicates whether Circuit Emulation Service trap should be generated on the Constant Bit Rate interface. |
| adnChassis | 1.3.6.1.4.1.637.3.1.2.5 | |||
| INT adnChassisBackupMSC8kSourceIfIndex | 1.3.6.1.4.1.637.3.1.5.15.1.1.8 | INTEGER | read-only | This variable identifies the backup line timing source . In spite of the name, which is like this for historical reasons, the line timing source can be MSC (Medium Speed Coupler) 8kHz, PDH HSC (High Speed Coupler) or SDH HSC line timing source. The value of this object corresponds to the ifIndex of the line which provides the source. The value 0 is used when there is no backup line timing source located on the chassis. |
| INT adnChassisClockPropagationStatus | 1.3.6.1.4.1.637.3.1.5.15.1.1.10 | INTEGER | read-only | This object provides the status of the clock propagated from this chassis to the next. It is a bit map and a set bit indicates that the clock is present. 1 - primary 8 kHz MSC (Medium Speed Coupler) 2 - backup 8 kHz MSC 4 - primary line timing (LT0) 8 - backup line timing (LT1) 16 - primary SDH (Synchronous Digital Hierarchy) 32 - backup SDH 64 - primary PDH (Plesiochronous Digital Hierarchy) 128 - backup PDH A value of 0 indicates that no clocks are being propagated. Note that the value of this object is 0 for a single-chassis system. |
| adnChassisEntry | 1.3.6.1.4.1.637.3.1.5.15.1.1 | not-accessible | An entry in the chassis table. There is one entry for each chassis. The index corresponds to equipment type 'chassis' in the adnEquipTable. | |
| INT adnChassisMidplaneClockStatus | 1.3.6.1.4.1.637.3.1.5.15.1.1.9 | INTEGER | read-only | This object provides the status of the reference clocks on the chassis midplane. It is a bit map and a set bit indicates clock presence. The bit positions refer to the following clock references: 1 - primary 8 kHz MSC (Medium Speed Coupler) - (H80B) 2 - backup 8 kHz MSC - (H81B) 4 - primary SDH (Synchronous Digital Hierarchy) 8 - backup SDH 16 - primary PDH (Plesiochronous Digital Hierarchy) 32 - backup PDH In a multi-chassis system, a value of 0 indicates that all clock references are down. In a single-chassis system, the value of this object is 0. |
| INT adnChassisOperFanId | 1.3.6.1.4.1.637.3.1.5.15.1.1.2 | INTEGER | read-only | This variable identifies the fan trays which are operational. It is a bit map represented as a sum; therefore, it can represent multiple fan trays in the operational state. Each bit position represents a fan tray. If the bit is set, the fan tray is operational. If the bit is not set, the fan tray is not operational. The bit positions are: 1 : Fan tray number 1 is operational 2 : Fan tray number 2 is operational Note: This information is not significant if the fan tray is not present in the chassis. |
| INT adnChassisOperPowerId | 1.3.6.1.4.1.637.3.1.5.15.1.1.4 | INTEGER | read-only | This variable identifies the power supplies which are operational. It is a bit map represented as a sum; therefore, it can represent multiple power supplies in the operational state. Each bit position represents a power supply. If the bit is set, the power supply is operational. If the bit is not set, the power supply is not operational. The bit positions are: 1 : Power supply number 1 is operational 2 : Power supply number 2 is operational 4 : Power supply number 3 is operational 8 : Power supply number 4 is operational 16 : Power supply number 5 is operational 32 : Power supply number 6 is operational. Note: This information is not significant if the power supply is not present in the chassis. |
| INT adnChassisPresentFanId | 1.3.6.1.4.1.637.3.1.5.15.1.1.3 | INTEGER | read-only | This variable identifies the fan trays which are present in the chassis. It is a bit map represented as a sum; therefore it can represent multiple fan trays in the chassis. Each bit position represents a fan tray. If the bit is set, the fan tray is present. If the bit is not set, the fan tray is absent. The bit positions are: 1 : Fan tray number 1 is present 2 : Fan tray number 2 is present. |
| INT adnChassisPresentPowerId | 1.3.6.1.4.1.637.3.1.5.15.1.1.5 | INTEGER | read-only | This variable identifies the power supplies which are present in the chassis. It is a bit map represented as a sum; therefore, it can represent multiple power supplies in the chassis. Each bit position represents a power supply. If the bit is set, the power supply is present. If the bit is not set, the power supply is absent. The various bit positions are: 1 : Power supply number 1 is present 2 : Power supply number 2 is present 4 : Power supply number 3 is present 8 : Power supply number 4 is present 16 : Power supply number 5 is present 32 : Power supply number 6 is present. |
| INT adnChassisPrimaryMSC8kSourceIfIndex | 1.3.6.1.4.1.637.3.1.5.15.1.1.7 | INTEGER | read-only | This variable identifies the master line timing source . In spite of the name, which is like this for historical reasons, the line timing source can be MSC (Medium Speed Coupler) 8kHz, PDH HSC (High Speed Coupler) or SDH HSC line timing source. The value of this object corresponds to the ifIndex of the line which provides the source. The value 0 is used when there is no master line timing source located on the chassis. |
| INT adnChassisRABUsage | 1.3.6.1.4.1.637.3.1.5.15.1.1.11 | INTEGER | read-only | This variable indicates the slot number of the primary card which uses the RAB ( Redundancy Applique Bus). The value zero indicates that the RAB is not used. |
| INT adnChassisSlotNumber | 1.3.6.1.4.1.637.3.1.5.15.1.1.6 | INTEGER | read-only | This variable indicates the number of slots in the chassis. |
| INT adnChassisStandbyCUBusStatus | 1.3.6.1.4.1.637.3.1.5.15.1.1.12 | INTEGER | read-only | This variable indicates the failures of the busses connected between the chassis and the standby CU ( Control Unit) card. It is a bit map represented as a sum; therefore it can represent multiple failures. The value zero indicates that there is no failure. The bit positions are : 32 : ISL (Internal Serial Link) bus failure detected on the standby CU 64 : IOS (Input Output Service) bus failure detected on the standby CU 128 : IOS (Input Output Service) bus silence detected on the standby CU 256 : ISL (Internal Serial Link) bus state unknown on the standby CU 512 : IOS (Input Output Service) bus state unknown on the standby CU. |
| INT adnChassisStatus | 1.3.6.1.4.1.637.3.1.5.15.1.1.1 | INTEGER | read-only | This variable indicates the chassis status. It is a bit map represented as a sum; therefore, it can represent multiple failures. The bit positions are: 1 : power supply failure 4 : fan failure 8 : temperature warning 16 : SAC card (Status and Alarm Control) failure 32 : ISL (Internal Serial Link) bus failure detected on the active CU 64 : IOS (Input Output Service) bus failure detected on the active CU 128 : IOS (Input Output Service) bus silence detected on the active CU 256 : ISL (Internal Serial Link) bus state unknown on the active CU 512 : IOS (Input Output Service) bus state unknown on the active CU N.B.: This variable is significant when the operational state of the chassis is disabled. When there is no chassis error, this variable has the value 0. |
| adnChassisTable | 1.3.6.1.4.1.637.3.1.5.15.1 | not-accessible | This is the chassis table. | |
| adnCiscoIr | 1.3.6.1.4.1.637.3.1.2.2.8.1 | |||
| adnClock | 1.3.6.1.4.1.637.3.1.5.14 | |||
| adnClockConfigEntry | 1.3.6.1.4.1.637.3.1.5.14.1.1 | not-accessible | An entry in the system clock configuration table. | |
| adnClockConfigTable | 1.3.6.1.4.1.637.3.1.5.14.1 | not-accessible | The system clock configuration table. | |
| INT adnClockIfIndex | 1.3.6.1.4.1.637.3.1.5.14.1.1.1 | INTEGER | read-only | The value of this object corresponds to the ifIndex and it uniquely identifies a DS1/E1 line. |
| INT adnClockSource | 1.3.6.1.4.1.637.3.1.5.14.1.1.4 | INTEGER | read-only | The system clock source is typically derived from the line(1). In a network with no other suitable clock source, one HSS can be designated as the clock source for the entire network. That HSS would be configured as internal(2) for its primary and backup. All other HSS in the network would still use the value line(1). |
| NTF adnClockSourceDown | 1.3.6.1.4.1.637.3.1.6.1.0.16 | This trap indicates that a line configured to be a clock source has gone down. | ||
| NTF adnClockSourceUp | 1.3.6.1.4.1.637.3.1.6.1.0.15 | This trap indicates that a line configured to be a clock source has come up. | ||
| INT adnClockStatus | 1.3.6.1.4.1.637.3.1.5.14.1.1.3 | INTEGER | read-only | The system clock status can be determined by looking at this object for both the primary and backup lines. If the status is failed for both lines, it implies that the system timing is provided by a local clock. If the status is failed in the primary line and good in the backup line, it implies that the system timing is provided by the backup line. If the status is good in the primary line, it implies that the system timing is provided by the primary line. |
| NTF adnClockStatusChange | 1.3.6.1.4.1.637.3.1.6.1.0.14 | This trap signifies that one or more clocks on the indicated chassis have changed state. | ||
| INT adnClockType | 1.3.6.1.4.1.637.3.1.5.14.1.1.2 | INTEGER | read-only | This object defines the type of DS1/E1 line. |
| INT adnCMBfvcadnFrPVCEndptXmitdSigStatus | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.47 | INTEGER | read-only | This is a duplicate of adnFrPVCEndptXmitdSigStatus. |
| INT adnCMBfvcadnFrVCAccounting | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.37 | INTEGER | read-only | This is a duplicate of adnFrVCAccounting. |
| INT adnCMBfvcadnFrVCAdminState | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.5 | INTEGER | read-only | This is a duplicate of adnFrVCAdminState. |
| INT adnCMBfvcadnFrVCAttemptState | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.35 | INTEGER | read-only | This is a duplicate of adnFrVCAttemptState. |
| CTR adnCMBfvcadnFrVCBcInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.23 | Counter | read-only | This is a duplicate of adnFrVCBcInDiscards. |
| CTR adnCMBfvcadnFrVCBcOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.26 | Counter | read-only | This is a duplicate of adnFrVCBcOutDiscards. |
| CTR adnCMBfvcadnFrVCBcsInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.22 | Counter | read-only | This is a duplicate of adnFrVCBcsInDiscards. |
| CTR adnCMBfvcadnFrVCBcsOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.25 | Counter | read-only | This is a duplicate of adnFrVCBcsOutDiscards. |
| CTR adnCMBfvcadnFrVCBeInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.21 | Counter | read-only | This is a duplicate of adnFrVCBeInDiscards. |
| CTR adnCMBfvcadnFrVCBeOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.24 | Counter | read-only | This is a duplicate of adnFrVCBeOutDiscards. |
| ADN adnCMBfvcadnFrVCCos | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.73 | AdnFrCos | read-only | This is a duplicate of adnFrVCCos. |
| T/F adnCMBfvcadnFrVCDelaySensitive | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.72 | TruthValue | read-only | This is a duplicate of adnFrVCDelaySensitive. |
| STR adnCMBfvcadnFrVCDescr | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.74 | DisplayString | read-only | This is a duplicate of adnFrVCDescr. |
| CTR adnCMBfvcadnFrVCDiscardLisIn | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.28 | Counter | read-only | This is a duplicate of adnFrVCDiscardLisIn. |
| adnCMBfvcadnFrVCEntry | 1.3.6.1.4.1.637.3.1.4.10.44.3.1 | not-accessible | VC table entry. | |
| INT adnCMBfvcadnFrVCFastRetry | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.13 | INTEGER | read-only | This is a duplicate of adnFrVCFastRetry. |
| ADN adnCMBfvcadnFrVCForcedPath | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.15 | AdnEnableDisabled | read-only | This is a duplicate of adnFrVCForcedPath. |
| CTR adnCMBfvcadnFrVCFrameIN | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.17 | Counter | read-only | This is a duplicate of adnFrVCFrameIN. |
| CTR adnCMBfvcadnFrVCFrameOUT | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.18 | Counter | read-only | This is a duplicate of adnFrVCFrameOUT. |
| INT adnCMBfvcadnFrVCInBc | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.48 | INTEGER | read-only | This is a duplicate of adnFrVCInBc. |
| INT adnCMBfvcadnFrVCInBcs | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.8 | INTEGER | read-only | This is a duplicate of adnFrVCInBcs. |
| ADN adnCMBfvcadnFrVCInCongsState | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.27 | AdnCongestLevels | read-only | This is a duplicate of adnFrVCInCongsState. |
| INT adnCMBfvcadnFrVCISR | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.34 | INTEGER | read-only | This is a duplicate of adnFrVCISR. |
| INT adnCMBfvcadnFrVCLastClrCauseRX | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.42 | INTEGER | read-only | This is a duplicate of adnFrVCLastClrCauseRX. |
| INT adnCMBfvcadnFrVCLastClrCauseTX | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.44 | INTEGER | read-only | This is a duplicate of adnFrVCLastClrCauseTX. |
| INT adnCMBfvcadnFrVCLastClrDiagRX | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.43 | INTEGER | read-only | This is a duplicate of adnFrVCLastClrDiagRX. |
| INT adnCMBfvcadnFrVCLastClrDiagTX | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.45 | INTEGER | read-only | This is a duplicate of adnFrVCLastClrDiagTX. |
| INT adnCMBfvcadnFrVCLisDiscard | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.11 | INTEGER | read-only | This is a duplicate of adnFrVCLisDiscard. |
| INT adnCMBfvcadnFrVCNumNodes | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.30 | INTEGER | read-only | This is a duplicate of adnFrVCNumNodes. |
| CTR adnCMBfvcadnFrVCNumRelinks | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.29 | Counter | read-only | This is a duplicate of adnFrVCNumRelinks. |
| INT adnCMBfvcadnFrVCOperState | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.6 | INTEGER | read-only | This is a duplicate of adnFrVCOperState. |
| INT adnCMBfvcadnFrVCOutBc | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.49 | INTEGER | read-only | This is a duplicate of adnFrVCOutBc. |
| INT adnCMBfvcadnFrVCOutBcs | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.9 | INTEGER | read-only | This is a duplicate of adnFrVCOutBcs. |
| INT adnCMBfvcadnFrVCOutDlci | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.33 | INTEGER | read-only | This is a duplicate of adnFrVCOutDlci. |
| NUM adnCMBfvcadnFrVCOutifIndex | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.32 | InterfaceIndex | read-only | This is a duplicate of adnFrVCOutifIndex. |
| INT adnCMBfvcadnFrVCRemDlci | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.4 | INTEGER | read-only | This is a duplicate of adnFrVCRemDlci. |
| INT adnCMBfvcadnFrVCRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.51 | INTEGER | read-only | This is a duplicate of adnFrVCRemNodeAreaNum. |
| ADN adnCMBfvcadnFrVCRemNodeID | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.1 | AdnRoutingID | read-only | This is a duplicate of adnFrVCRemNodeID. |
| INT adnCMBfvcadnFrVCRemNodeMacNum | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.50 | INTEGER | read-only | This is a duplicate of adnFrVCRemNodeMacNum. |
| INT adnCMBfvcadnFrVCRemNumPlan | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.2 | INTEGER | read-only | This is a duplicate of adnFrVCRemNumPlan. |
| INT adnCMBfvcadnFrVCRemoteifindex | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.46 | INTEGER | read-only | This is a duplicate of adnFrVCRemoteifindex. |
| PHY adnCMBfvcadnFrVCRemPhysAddress | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.3 | PhysAddress | read-only | This is a duplicate of adnFrVCRemPhysAddress. |
| INT adnCMBfvcadnFrVCRetryAttempts | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.12 | INTEGER | read-only | This is a duplicate of adnFrVCRetryAttempts. |
| INT adnCMBfvcadnFrVCSlowRetry | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.14 | INTEGER | read-only | This is a duplicate of adnFrVCSlowRetry. |
| INT adnCMBfvcadnFrVCSourceDest | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.16 | INTEGER | read-only | This is a duplicate of adnFrVCSourceDest. |
| INT adnCMBfvcadnFrVCStatistics | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.36 | INTEGER | read-only | This is a duplicate of adnFrVCStatistics. |
| CTR adnCMBfvcadnFrVCSubFrameIN | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.19 | Counter | read-only | This is a duplicate of adnFrVCSubFrameIN. |
| CTR adnCMBfvcadnFrVCSubFrameOUT | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.20 | Counter | read-only | This is a duplicate of adnFrVCSubFrameOUT. |
| adnCMBfvcadnFrVCTable | 1.3.6.1.4.1.637.3.1.4.10.44.3 | not-accessible | These are the VC table extensions to the PVC End-Point table in RFC1604. This table is used for PVCs and SVCs. | |
| ADN adnCMBfvcadnFrVCTime | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.7 | AdnNodeTimeStamp | read-only | This is a duplicate of adnFrVCTime. |
| INT adnCMBfvcadnFrVCType | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.31 | INTEGER | read-only | This is a duplicate of adnFrVCType. |
| INT adnCMBfvcadnFrVCUniqueConnID | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.40 | INTEGER | read-only | This is a duplicate of adnFrVCUniqueConnID. |
| INT adnCMBfvcadnFrVCUserOrNet | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.10 | INTEGER | read-only | This is a duplicate of adnFrVCUserOrNet. |
| INT adnCMBfvcfrPVCEndptConnectIdentifier | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.61 | INTEGER | read-only | This is a duplicate of frPVCEndptConnectIdentifier. |
| INT adnCMBfvcfrPVCEndptDLCIIndex | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.52 | INTEGER | not-accessible | This is a duplicate of frPVCEndptDLCIIndex. |
| INT adnCMBfvcfrPVCEndptInBc | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.54 | INTEGER | read-only | This is a duplicate of frPVCEndptInBc. |
| INT adnCMBfvcfrPVCEndptInBe | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.55 | INTEGER | read-only | This is a duplicate of frPVCEndptInBe. |
| INT adnCMBfvcfrPVCEndptInCIR | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.56 | INTEGER | read-only | This is a duplicate of frPVCEndptInCIR. |
| CTR adnCMBfvcfrPVCEndptInDEFrames | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.66 | Counter | read-only | This is a duplicate of frPVCEndptInDEFrames. |
| CTR adnCMBfvcfrPVCEndptInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.69 | Counter | read-only | This is a duplicate of frPVCEndptInDiscards. |
| CTR adnCMBfvcfrPVCEndptInExcessFrames | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.67 | Counter | read-only | This is a duplicate of frPVCEndptInExcessFrames. |
| CTR adnCMBfvcfrPVCEndptInFrames | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.64 | Counter | read-only | This is a duplicate of frPVCEndptInFrames. |
| INT adnCMBfvcfrPVCEndptInMaxFrameSize | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.53 | INTEGER | read-only | This is a duplicate of frPVCEndptInMaxFrameSize. |
| CTR adnCMBfvcfrPVCEndptInOctets | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.70 | Counter | read-only | This is a duplicate of frPVCEndptInOctets. |
| INT adnCMBfvcfrPVCEndptOutBc | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.58 | INTEGER | read-only | This is a duplicate of frPVCEndptOutBc. |
| INT adnCMBfvcfrPVCEndptOutBe | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.59 | INTEGER | read-only | This is a duplicate of frPVCEndptOutBe. |
| INT adnCMBfvcfrPVCEndptOutCIR | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.60 | INTEGER | read-only | This is a duplicate of frPVCEndptOutCIR. |
| CTR adnCMBfvcfrPVCEndptOutExcessFrames | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.68 | Counter | read-only | This is a duplicate of frPVCEndptOutExcessFrames. |
| CTR adnCMBfvcfrPVCEndptOutFrames | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.65 | Counter | read-only | This is a duplicate of frPVCEndptOutFrames. |
| INT adnCMBfvcfrPVCEndptOutMaxFrameSize | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.57 | INTEGER | read-only | This is a duplicate of frPVCEndptOutMaxFrameSize. |
| CTR adnCMBfvcfrPVCEndptOutOctets | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.71 | Counter | read-only | This is a duplicate of frPVCEndptOutOctets. |
| INT adnCMBfvcfrPVCEndptRcvdSigStatus | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.63 | INTEGER | read-only | This is a duplicate of frPVCEndptRcvdSigStatus. |
| ROW adnCMBfvcfrPVCEndptRowStatus | 1.3.6.1.4.1.637.3.1.4.10.44.3.1.62 | RowStatus | read-only | This is a duplicate of frPVCEndptRowStatus. |
| adnCmic | 1.3.6.1.4.1.637.3.1.2.2.9.11 | |||
| INT adnCnmAccess | 1.3.6.1.4.1.637.3.1.5.9.2.2.1.3 | INTEGER | read-write | The access type of a particular family of Customer Network Management (CNM) interfaces within the particular CNM view. The value 'none(1)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface which is not accessible. The value 'read(2)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface which is read-only. The value 'write(3)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface with read-write permissions. |
| adnCnmEntry | 1.3.6.1.4.1.637.3.1.5.9.2.2.1 | not-accessible | An entry containing information on a particular family of Customer Network Management (CNM) interfaces. | |
| INT adnCnmIfIndex | 1.3.6.1.4.1.637.3.1.5.9.2.2.1.2 | INTEGER | not-accessible | The value of this object is equal to MIB II's ifIndex value. This Customer Network Management (CNM) interface should be a physical line or channel. |
| INT adnCnmIndex | 1.3.6.1.4.1.637.3.1.5.9.2.2.1.1 | INTEGER | not-accessible | A unique value for each Customer Network Management (CNM) view. The value for each CNM view must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. |
| adnCnmTable | 1.3.6.1.4.1.637.3.1.5.9.2.2 | not-accessible | The Customer Network Management (CNM) database. | |
| INT adnCnmType | 1.3.6.1.4.1.637.3.1.5.9.2.2.1.4 | INTEGER | read-write | The status of a particular family of Customer Network Management (CNM) interfaces within the particular CNM view. The value 'included(1)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface included in the CNM view. The value 'excluded(2)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface excluded from the CNM view. |
| NTF adnConfigStatus | 1.3.6.1.4.1.637.3.1.6.1.0.6 | This trap is sent in response to each NMS command or state change. | ||
| INT adnCongMgmtChanCUFValue | 1.3.6.1.4.1.637.3.1.5.5.1.1.1 | INTEGER | read-only | Equals the current CUF (channel utilization factor) value of the channel. |
| adnCongMgmtChanEntry | 1.3.6.1.4.1.637.3.1.5.5.1.1 | not-accessible | An entry in the frame relay channel information table. | |
| adnCongMgmtChanTable | 1.3.6.1.4.1.637.3.1.5.5.1 | not-accessible | Frame relay channel information table for congestion management. | |
| adnCongMgmtMIB | 1.3.6.1.4.1.637.3.1.5.5 | |||
| CTR adnCongMgmtVCBcInDiscards | 1.3.6.1.4.1.637.3.1.5.5.2.1.2 | Counter | read-only | Number of Bc (committed data rate) sub-frames that were discarded for ingress traffic (TPX interworking function, frame relay switching interface, or frame relay subsystem) due to ISM (internal switching mechanism) queue congestion. |
| CTR adnCongMgmtVCBcsInDiscards | 1.3.6.1.4.1.637.3.1.5.5.2.1.3 | Counter | read-only | Number of Bcs (statistically committed data rate) sub-frames that were discarded for ingress traffic (TPX interworking function, frame relay switching interface, or frame relay subsystem) due to ISM (internal switching mechanism) queue congestion. |
| CTR adnCongMgmtVCBeInDiscards | 1.3.6.1.4.1.637.3.1.5.5.2.1.4 | Counter | read-only | Number of Be (excess burst data rate) sub-frames that were discarded for ingress traffic (TPX interworking function, frame relay switching interface, or frame relay subsystem) due to ISM (internal switching mechanism) queue congestion. |
| INT adnCongMgmtVCCurrentSIR | 1.3.6.1.4.1.637.3.1.5.5.2.1.9 | INTEGER | read-only | Equals the current submission rate of this VC, if this VC belongs to the FRS (frame relay subsystem) channel. |
| INT adnCongMgmtVCDLCIIndex | 1.3.6.1.4.1.637.3.1.5.5.2.1.1 | INTEGER | not-accessible | Equal to the DLCI (data link connection identifier) value for the frame relay trunk or FRS (frame relay subsystem) local DLCI. |
| adnCongMgmtVCEntry | 1.3.6.1.4.1.637.3.1.5.5.2.1 | not-accessible | VC table entry. | |
| CTR adnCongMgmtVCInBcsSubfrmSent | 1.3.6.1.4.1.637.3.1.5.5.2.1.6 | Counter | read-only | Number of Bcs (statistically committed data rate) sub-frames sent to the ISM (internal switching mechanism). |
| CTR adnCongMgmtVCInBcSubfrmSent | 1.3.6.1.4.1.637.3.1.5.5.2.1.5 | Counter | read-only | Number of Bc (committed data rate) sub-frames sent to the ISM (internal switching mechanism). |
| CTR adnCongMgmtVCInBeSubfrmSent | 1.3.6.1.4.1.637.3.1.5.5.2.1.7 | Counter | read-only | Number of Be (excess burst data rate) sub-frames sent to the ISM (internal switching mechanism). |
| ADN adnCongMgmtVCInCongsState | 1.3.6.1.4.1.637.3.1.5.5.2.1.8 | AdnCongestLevels | read-only | Congestion level in the direction of transmit to ISM (internal switching mechanism). |
| adnCongMgmtVCTable | 1.3.6.1.4.1.637.3.1.5.5.2 | not-accessible | VC table for frame relay congestion management. | |
| INT adnContainedIndex | 1.3.6.1.4.1.637.3.1.5.2.1.4 | INTEGER | read-only | The value of this object corresponds to the adnEquipIndex of the contained component. |
| ADN adnContainedType | 1.3.6.1.4.1.637.3.1.5.2.1.3 | AdnEquipType | read-only | The value of this object corresponds to the adnEquipType of the contained component. |
| adnContainEntry | 1.3.6.1.4.1.637.3.1.5.2.1 | not-accessible | A container entry representing the containment relationship between entries in the equipment table. | |
| INT adnContainerIndex | 1.3.6.1.4.1.637.3.1.5.2.1.2 | INTEGER | read-only | The value of this object corresponds to the adnEquipIndex of the container component. Common name: Equip Index |
| INT adnContainerPosition | 1.3.6.1.4.1.637.3.1.5.2.1.5 | INTEGER | read-only | The value of this object represents the position of the contained component within the container component. |
| ADN adnContainerType | 1.3.6.1.4.1.637.3.1.5.2.1.1 | AdnEquipType | read-only | This object corresponds to the adnEquipType of the container component. |
| adnContainTable | 1.3.6.1.4.1.637.3.1.5.2 | not-accessible | A list of container entries. For example, a node contains chassis. | |
| INT adncriterionIndex | 1.3.6.1.4.1.637.3.1.5.8.1.1.2 | INTEGER | not-accessible | Rule used to generate a routing table based on the link cost metrics. |
| adnCs | 1.3.6.1.4.1.637.3.1.2.2.9.1 | |||
| adnCtas | 1.3.6.1.4.1.637.3.1.2.2.9.20 | |||
| adnCtj64 | 1.3.6.1.4.1.637.3.1.2.2.9.12 | |||
| adnCts | 1.3.6.1.4.1.637.3.1.2.2.9.10 | |||
| adnCts1 | 1.3.6.1.4.1.637.3.1.2.2.9.18 | |||
| adnCts1b | 1.3.6.1.4.1.637.3.1.2.2.9.21 | |||
| adnCts2 | 1.3.6.1.4.1.637.3.1.2.2.9.19 | |||
| adnCtuj | 1.3.6.1.4.1.637.3.1.2.2.9.5 | |||
| adnCu | 1.3.6.1.4.1.637.3.1.2.2.6 | |||
| INT adnCuCodeOperStatus | 1.3.6.1.4.1.637.3.1.5.12.2.2.1.2 | INTEGER | read-only | This object notifies the NMS of the results of the last command, or whether it is still in progress. |
| INT adnCuCodeServiceIdIndex | 1.3.6.1.4.1.637.3.1.5.12.2.2.1.1 | INTEGER | not-accessible | Index field. The value of a Control Unit service. |
| INT adnCuCodeState | 1.3.6.1.4.1.637.3.1.5.12.2.2.1.3 | INTEGER | read-only | This object notifies the NMS of the `state' of Control Unit code update processing. |
| adnCuCodeUpdateCntlEntry | 1.3.6.1.4.1.637.3.1.5.12.2.2.1 | not-accessible | An entry in the Control Unit code portion of the Update Control table. | |
| adnCuCodeUpdateCntlTable | 1.3.6.1.4.1.637.3.1.5.12.2.2 | not-accessible | The Control Unit Update Control table contains objects for Control Unit code operational status between the HSS and the NMS. | |
| INT adnCuConfigApplIdIndex | 1.3.6.1.4.1.637.3.1.5.12.2.3.1.1 | INTEGER | not-accessible | Index field - Control Unit application IDs (e.g. NMGS, SFAS, Main Supervisor, ....) |
| OCT adnCuConfigFileName | 1.3.6.1.4.1.637.3.1.5.12.2.3.1.4 | OCTET STRING | read-only | This object identifies the configuration file to be used for this Control Unit subsystem. |
| OCT adnCuConfigNextFileName | 1.3.6.1.4.1.637.3.1.5.12.2.3.1.5 | OCTET STRING | read-only | This object identifies the next configuration file to be used for this Control Unit subsystem, if there is an automatic rollback in progress from uncommitted configuration to committed configuration. The value of this object is not significant if there is currently no rollback in progress. |
| INT adnCuConfigOperStatus | 1.3.6.1.4.1.637.3.1.5.12.2.3.1.2 | INTEGER | read-only | This object notifies the NMS of the results of the last command, or whether it is still in progress. |
| INT adnCuConfigState | 1.3.6.1.4.1.637.3.1.5.12.2.3.1.3 | INTEGER | read-only | This object notifies the NMS of the `state' of Control Unit configuration update processing. The values mean: committed -- This CU application is not currently loading configuration tables. Its configuration tables are from the committed version. actInProgWaitingForLoadInd -- An Activate command is in progress, and for this CU application, the state machine is waiting for an indication that a request has been received to start loading the tables. actInProgMiddleTransaction -- An Activate command is in progress, and for this CU application, the state machine is waiting for the response to a middle message within a configuration transaction. actInProgEndTransaction -- An Activate command is in progress, and for this CU application, the state machine is waiting for the response to a null message that signals the end of a a configuration transaction. uncommitted -- This CU application is using uncommitted configuration tables. loadingCommittedNextFile -- This CU application is the the process of loading uncommitted configuration tables. The state machine is waiting for a response to a null message that signals the end of a transaction, and will then send the next configuration file, which will be the rollback file. loadingCommittedMiddleTrans -- This CU application is the the process of loading committed configuration tables. The state machine is waiting for a response to a middle message within the configuration transaction. loadingCommittedEndTrans -- This CU application is the the process of loading committed configuration tables. The state machine is waiting for a response to a null message that signals the end of a transaction. |
| adnCuConfigUpdateCntlEntry | 1.3.6.1.4.1.637.3.1.5.12.2.3.1 | not-accessible | An entry in the Control Unit Configuration Update Control table. | |
| adnCuConfigUpdateCntlTable | 1.3.6.1.4.1.637.3.1.5.12.2.3 | not-accessible | The Configuration Update Control table contains objects for Control Unit Configuration operational status between the HSS and the NMS. | |
| adnCUMain | 1.3.6.1.4.1.637.3.1.2.4.1 | |||
| adnCurAjhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.12.1 | not-accessible | Each row provides information about a header of a specific learned adjacency table. | |
| INT adnCurAjhdrNum | 1.3.6.1.4.1.637.3.1.5.8.12.1.3 | INTEGER | read-only | Number of adjacent node entries in a learned adjacency table. |
| ADN adnCurAjhdrStamp | 1.3.6.1.4.1.637.3.1.5.8.12.1.2 | AdnNodeTimeStamp | read-only | Time-of-day stamp of a learned adjacency table. |
| adnCurAjhdrTable | 1.3.6.1.4.1.637.3.1.5.8.12 | not-accessible | Information about the headers of the learned adjacency tables for all types of service. | |
| INT adnCurAjhdrVer | 1.3.6.1.4.1.637.3.1.5.8.12.1.1 | INTEGER | read-only | Version number of a learned adjacency table. |
| adnCurAjLineEntry | 1.3.6.1.4.1.637.3.1.5.8.14.1 | not-accessible | Each entry (row) in the adnCurAjLineTable provides key information about a particular logical line (channel) to the adjacent node. | |
| adnCurAjLinehdrEntry | 1.3.6.1.4.1.637.3.1.5.8.13.1 | not-accessible | Each entry (row) in the adnCurAjLinehdrTable provides key information about a particular adjacent node. | |
| adnCurAjLinehdrTable | 1.3.6.1.4.1.637.3.1.5.8.13 | not-accessible | Refers to the HSS routing services current adjacency table on the control unit used to track adjacent connections, particularly for purposes of load balancing. Node-to-path table path entries reference the adjacency table. The adjacency header table provides access to the information in the adjacency table entry headers. See the related AdnCurAjLineTable for individual lines associated with a particular adjacent node header. | |
| adnCurAjLineTable | 1.3.6.1.4.1.637.3.1.5.8.14 | not-accessible | Gives access to the line level information in the adjacency table for each adjacent node entry. This table is related to the adnCurAjhdrTable and refers only to the control unit. | |
| INT adnCurAjNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.8.13.1.7 | INTEGER | read-only | The area number part of adnCurAnodeIndex, the routing area number of the node at the remote endpoint. |
| INT adnCurAjNodeMacNum | 1.3.6.1.4.1.637.3.1.5.8.13.1.6 | INTEGER | read-only | The machine number part of adnCurAnodeIndex, the routing node ID of the node at the remote endpoint. |
| ADN adnCurAnodeIndex | 1.3.6.1.4.1.637.3.1.5.8.13.1.1 | AdnRoutingID | not-accessible | Each adjacent node ID identifies an entry in the adjacency table. Routing services treats a node ID as an unsigned 32-bit integer. |
| ADN adnCurDnodeIndex | 1.3.6.1.4.1.637.3.1.5.8.7.1.1 | AdnRoutingID | not-accessible | A destination node ID identifies an entry in the node-to-path table. |
| adnCurNPhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.6.1 | not-accessible | Each row provides information about the header of a specific automatically built node-to-path table. | |
| IP adnCurNPhdrIpAdr | 1.3.6.1.4.1.637.3.1.5.8.7.1.2 | IpAddress | read-only | The IP address of the adjacent node. |
| INT adnCurNPhdrNum | 1.3.6.1.4.1.637.3.1.5.8.6.1.3 | INTEGER | read-only | Number of destination node entries in the current node-to-path table. |
| INT adnCurNPhdrNumPth | 1.3.6.1.4.1.637.3.1.5.8.7.1.3 | INTEGER | read-only | Number of paths indicates the number of separate paths from the current node to the destination node; note that each path is uniquely associated with an adjacent node. |
| ADN adnCurNPhdrStamp | 1.3.6.1.4.1.637.3.1.5.8.6.1.2 | AdnNodeTimeStamp | read-only | Time-of-day stamp of the current node-to-path table. |
| adnCurNPhdrTable | 1.3.6.1.4.1.637.3.1.5.8.6 | not-accessible | Information about the headers of the automatically built node-to-path tables, for all the types of service and criteria. These tables are used for establishing calls within the network. | |
| INT adnCurNPhdrVer | 1.3.6.1.4.1.637.3.1.5.8.6.1.1 | INTEGER | read-only | Version number of the current node-to-path table. |
| adnCurNPPathhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.7.1 | not-accessible | Each entry (row) in the adnCurNPPathhdrTable provides all the information found in a table entry's header of the current node-to-path table on the control unit. | |
| adnCurNPPathhdrTable | 1.3.6.1.4.1.637.3.1.5.8.7 | not-accessible | Defines access to information in the destination node entry headers of the current node-to-path table on the control unit. A destination node header of a node-to-path table entry gives summary information about that destination node's routing status. See the associated adnCurNPpthTable for the path information associated with each Dnode of the adnCurNPPathhdrTable. | |
| ADN adnCurNPpthAJid | 1.3.6.1.4.1.637.3.1.5.8.8.1.3 | AdnRoutingID | read-only | An adjacent node to which this node is connected. |
| INT adnCurNPpthCost | 1.3.6.1.4.1.637.3.1.5.8.8.1.2 | INTEGER | read-only | The cost of getting to the destination from this node using this path. |
| adnCurNPpthEntry | 1.3.6.1.4.1.637.3.1.5.8.8.1 | not-accessible | Each entry (row) in the adnCurNPpthTable provides all the information in a particular path entry of the current node-to-path table on the control unit. | |
| adnCurNPpthTable | 1.3.6.1.4.1.637.3.1.5.8.8 | not-accessible | Defines access to path information in a destination node entry of a current node-to-path table on the control unit. | |
| INT adnCurPathIndex | 1.3.6.1.4.1.637.3.1.5.8.8.1.1 | INTEGER | not-accessible | Number that identifies path order: first, second, third, etc. Number of paths in a node-to-path table entry is variable. |
| INT adnCurRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.8.7.1.5 | INTEGER | read-only | The area number part of adnCurDnodeIndex, the routing area number of the node at the remote endpoint. |
| INT adnCurRemNodeMacNum | 1.3.6.1.4.1.637.3.1.5.8.7.1.4 | INTEGER | read-only | The machine number part of adnCurDnodeIndex, the routing node ID of the node at the remote endpoint. |
| INT adnCvsiActiveSesId | 1.3.6.1.4.1.637.3.1.5.22.1.2 | INTEGER | read-only | This object indicates the active session ID of the CVSI slave in the HSS. This value changes whenever the slave is restarted, powered up, switched over to or manually reset. The session IDs are used by the Tag Switch Controller (TSC) to detect the loss of synchronization. Common Name: Active Session ID |
| INT adnCvsiControllerId | 1.3.6.1.4.1.637.3.1.5.22.1.6 | INTEGER | read-only | The controller ID for the Tag Switch Controller (TSC) in this Tag Switching Router (TSR). Common Name: Controller ID |
| INT adnCvsiCurrCmdWindow | 1.3.6.1.4.1.637.3.1.5.22.1.11 | INTEGER | read-only | The number of pending commands in the CVSI slave in the HSS. A command will be pending if it has not been processed by the CVSI slave. Common Name: Current Cmd Window |
| INT adnCvsiCurrTrapWindow | 1.3.6.1.4.1.637.3.1.5.22.1.9 | INTEGER | read-only | The number of pending traps in the CVSI slave in the HSS. The traps will be pending if either the Tag Switch Controller (TSC) hasn't acknowledged them, or they could not be sent for some reason. Common Name: Current Trap Window |
| INT adnCvsiMaxCmdWindow | 1.3.6.1.4.1.637.3.1.5.22.1.10 | INTEGER | read-only | The maximum number of commands which can be pending in the CVSI slave in the HSS. A command will be pending if it has not been processed by the CVSI slave. This value is conveyed to the Tag Switch controller. Common Name: Max Cmd Window |
| INT adnCvsiMaxTrapWindow | 1.3.6.1.4.1.637.3.1.5.22.1.8 | INTEGER | read-only | The maximum number of traps which can be pending in the CVSI slave in the HSS. The traps will be pending if either the Tag Switch controller (TSC) hasn't acknowledged them, or they could not be sent for some reason. Common Name: Max Trap Window |
| adnCvsiMIB | 1.3.6.1.4.1.637.3.1.5.22 | |||
| INT adnCvsiPwrUpSesId | 1.3.6.1.4.1.637.3.1.5.22.1.3 | INTEGER | read-only | This object indicates the power-up session ID of the CVSI slave in the HSS. This value reflects the session ID which was assigned when this slave was powered up. This value may be used by the Tag Switch Controller (TSC) for detecting a more serious synchronization loss. Common Name: PowerUp Session ID |
| INT adnCvsiSlaveId | 1.3.6.1.4.1.637.3.1.5.22.1.4 | INTEGER | read-only | The slave ID corresponding to this instance of CVSI slave in HSS. This value is relevant if we have multiple slaves for each Tag Switch Controller (TSC). Common Name: Salve ID |
| INT adnCvsiSpacingRate | 1.3.6.1.4.1.637.3.1.5.22.1.13 | INTEGER | read-write | The rate at which traffic will be spaced if adnCvsiSpacingState is enabled. This rate is specified in cells per second. Common Name: Spacing Rate |
| ADN adnCvsiSpacingState | 1.3.6.1.4.1.637.3.1.5.22.1.12 | AdnEnableDisabled | read-write | Indicates whether traffic spacing is performed at all TDP interfaces. Spacing is used to reduce the peak to peak Cell Delay Variation (CDV) or to smoooth out bursty traffic coming into the network or to perform rate reduction. Common Name: Spacing State |
| INT adnCvsiSwitchId | 1.3.6.1.4.1.637.3.1.5.22.1.5 | INTEGER | read-only | The switch ID for the HSS in this Tag Switching Router (TSR). Common Name: Switch ID |
| adnCvsiSwitchInfoGroup | 1.3.6.1.4.1.637.3.1.5.22.1 | |||
| INT adnCvsiTscChnlState | 1.3.6.1.4.1.637.3.1.5.22.1.1 | INTEGER | read-only | This entry represents the status of the Tag Switch Controller (TSC) channel. This channel connects the HSS with the Tag Switch Controller (TSC). Common Name: TSC Channel State |
| NUM adnCvsiTscIfIndex | 1.3.6.1.4.1.637.3.1.5.22.1.14 | InterfaceIndex | read-write | The ifIndex of the TSC interface for this switch. Common Name: TSC ifIndex |
| INT adnCvsiVersionId | 1.3.6.1.4.1.637.3.1.5.22.1.7 | INTEGER | read-only | The version of the CVSI code running in this Tag Switching Router (TSR). Common Name: Version ID |
| adnDcFtd | 1.3.6.1.4.1.637.3.1.2.2.9.8 | |||
| adnDclmg | 1.3.6.1.4.1.637.3.1.2.2.9.9 | |||
| adnDcv11 | 1.3.6.1.4.1.637.3.1.2.2.9.15 | |||
| adnDcv35 | 1.3.6.1.4.1.637.3.1.2.2.9.14 | |||
| ADN adnDnodeIndex | 1.3.6.1.4.1.637.3.1.5.8.24.1.1 | AdnRoutingID | not-accessible | A destination node ID identifies an entry in the node-to-path table. |
| adnDs1 | 1.3.6.1.4.1.637.3.1.4.10.18 | |||
| adnDs3e3 | 1.3.6.1.4.1.637.3.1.4.10.30 | |||
| CTR adnDsx1AisCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.2 | Counter | read-only | Duration of alarm indication signal (AIS). Counter #2 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1 interfaces. |
| adnDsx1ConfigEntry | 1.3.6.1.4.1.637.3.1.4.10.18.1.1 | not-accessible | An entry in the DS1 Configuration table extension. | |
| adnDsx1ConfigTable | 1.3.6.1.4.1.637.3.1.4.10.18.1 | not-accessible | This table is the extension of the dsx1ConfigTable described in the DS1/E1 standard MIB. | |
| adnDsx1CounterEntry | 1.3.6.1.4.1.637.3.1.4.10.18.2.1 | not-accessible | An entry in the DS1/E1 ADN Counter table . | |
| adnDsx1CounterTable | 1.3.6.1.4.1.637.3.1.4.10.18.2 | not-accessible | The DS1/E1 ADN Counter table. | |
| GAU adnDsx1CurrentAESs | 1.3.6.1.4.1.637.3.1.4.10.18.3.1.3 | Gauge | read-only | Number of errored seconds of type A at path level (ESA-P) encountered during the current 15-minute interval. Common Name: Errored Seconds of type A |
| GAU adnDsx1CurrentAISSs | 1.3.6.1.4.1.637.3.1.4.10.18.3.1.4 | Gauge | read-only | Number of seconds containing one or more AIS defects at path level (AISS-P) encountered during the current 15-minute interval. Common Name: AIS Seconds |
| adnDsx1CurrentEntry | 1.3.6.1.4.1.637.3.1.4.10.18.3.1 | not-accessible | An entry in the ADN DS1/E1 Current table. | |
| GAU adnDsx1CurrentLLOSSs | 1.3.6.1.4.1.637.3.1.4.10.18.3.1.2 | Gauge | read-only | Number of seconds containing one or more LOS defects (LOSS-L) encountered during the current 15-minute interval. Common Name: LOS Seconds |
| GAU adnDsx1CurrentLSESs | 1.3.6.1.4.1.637.3.1.4.10.18.3.1.1 | Gauge | read-only | Number of Severely errored seconds (SES-L) at line level encountered during the current 15-minute interval. Common Name: Severely Errored Seconds |
| adnDsx1CurrentTable | 1.3.6.1.4.1.637.3.1.4.10.18.3 | not-accessible | The ADN DS1/E1 Current table. This table is supported by CES-T1 interfaces. This table refers to ANSI T1.231. | |
| GAU adnDsx1DayIntervalAESs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.12 | Gauge | read-only | Number of errored seconds of type A at path level (ESA-P) encountered during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalAISSs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.13 | Gauge | read-only | Number of seconds containing one or more AIS defects at path level (AISS-P) encountered during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalBESs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.8 | Gauge | read-only | The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalCSSs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.5 | Gauge | read-only | The number of Controlled Slip Seconds (CSS) encoun- tered by a DS1 interface during the current day (from 0 hours to the current time). |
| adnDsx1DayIntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.18.5.1 | not-accessible | An entry in the ADN DS1/E1 Day Interval table. | |
| GAU adnDsx1DayIntervalESs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.1 | Gauge | read-only | The number of Errored Seconds (ES) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalLCVs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.9 | Gauge | read-only | The number of Line Code Violations (LCVs) en- countered by a DS1 interface in the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalLESs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.7 | Gauge | read-only | The number of Line Errored Seconds (LES) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalLLOSSs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.11 | Gauge | read-only | Number of seconds containing one or more LOS defects (LOSS-L) encountered during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalLSESs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.10 | Gauge | read-only | Number of Severely errored seconds (SES-L) at line level encountered during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalPCVs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.6 | Gauge | read-only | The number of Path Coding Violations (PCV) encoun- tered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalSEFSs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.3 | Gauge | read-only | The number of Severely Errored Framing Seconds (SEFS) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1DayIntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.2 | Gauge | read-only | The number of Severely Errored Seconds (SES) encoun- tered by a DS1 interface during the current day (from 0 hours to the current time). |
| adnDsx1DayIntervalTable | 1.3.6.1.4.1.637.3.1.4.10.18.5 | not-accessible | The ADN DS1/E1 Day Interval table. This table is supported by CES-T1 interfaces. This table refers to ANSI T1.231. | |
| GAU adnDsx1DayIntervalUASs | 1.3.6.1.4.1.637.3.1.4.10.18.5.1.4 | Gauge | read-only | The number of Unavailable Seconds (UAS) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| NTF adnDsx1ErrorBeg | 1.3.6.1.4.1.637.3.1.6.3.0.11 | Indicates that a failure has appeared on the DS1/E1 interface. | ||
| INT adnDsx1ErrorCause | 1.3.6.1.4.1.637.3.1.6.5.33 | INTEGER | not-accessible | The cause of the DS1/E1 trap currently being sent. This variable occurs as a variable-binding of an SNMP Trap PDU. |
| NTF adnDsx1ErrorEnd | 1.3.6.1.4.1.637.3.1.6.3.0.12 | Indicates that a failure has been cleared on the DS1/E1 interface. | ||
| CTR adnDsx1ExzCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.14 | Counter | read-only | Number of excessive zeros (EXZ). Counter #31 of the ATM core, only available on ATM-T1 and CES-T1 interfaces. |
| GAU adnDsx1FarEndCurrentAESs | 1.3.6.1.4.1.637.3.1.4.10.18.6.1.1 | Gauge | read-only | Number of errored seconds of type A at path level (ESA) encountered by the remote equipment during the current 15-minute interval. Common Name: Errored Seconds of type A |
| adnDsx1FarEndCurrentEntry | 1.3.6.1.4.1.637.3.1.4.10.18.6.1 | not-accessible | An entry in the ADN Far End DS1/E1 Current table. | |
| adnDsx1FarEndCurrentTable | 1.3.6.1.4.1.637.3.1.4.10.18.6 | not-accessible | The ADN DS1/E1 Far End Current table. This table is supported by CES-T1-ESF interfaces. This table refers to ANSI T1.231. | |
| GAU adnDsx1FarEndDayIntervalAESs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.9 | Gauge | read-only | Number of errored seconds of type A at path level (ESA) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| GAU adnDsx1FarEndDayIntervalBESs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.8 | Gauge | read-only | The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1FarEndDayIntervalCSSs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.5 | Gauge | read-only | The number of Far End Controlled Slip Seconds (CSS) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| adnDsx1FarEndDayIntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.18.8.1 | not-accessible | An entry in the ADN Far End DS1/E1 Day Interval table. | |
| GAU adnDsx1FarEndDayIntervalESs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.1 | Gauge | read-only | The number of Far End Errored Seconds (ES) encoun- tered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1FarEndDayIntervalLESs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.7 | Gauge | read-only | The number of Far End Line Errored Seconds (LES) en- countered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1FarEndDayIntervalPCVs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.6 | Gauge | read-only | The number of Far End Path Coding Violations (PCV) reported via the far end block error count en- countered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1FarEndDayIntervalSEFSs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.3 | Gauge | read-only | The number of Far End Severely Errored Framing Seconds (SEFS) encountered by a DS1 interface in the cuurent day (from 0 hours to the current time). |
| GAU adnDsx1FarEndDayIntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.2 | Gauge | read-only | The number of Far End Severely Errored Seconds (SES) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| adnDsx1FarEndDayIntervalTable | 1.3.6.1.4.1.637.3.1.4.10.18.8 | not-accessible | The ADN DS1/E1 Far End Day Interval table. This table is supported by CES-T1-ESF interfaces. This table refers to ANSI T1.231. | |
| GAU adnDsx1FarEndDayIntervalUASs | 1.3.6.1.4.1.637.3.1.4.10.18.8.1.4 | Gauge | read-only | The number of Far End Unavailable Seconds (UAS) encountered by a DS1 interface during the current day (from 0 hours to the current time). |
| GAU adnDsx1FarEndIntervalAESs | 1.3.6.1.4.1.637.3.1.4.10.18.7.1.2 | Gauge | read-only | Number of errored seconds of type A at path level (ESA) encountered by the remote equipment during the current 15-minute interval. Common Name: Errored Seconds of type A |
| adnDsx1FarEndIntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.18.7.1 | not-accessible | An entry in the ADN Far End DS1/E1 Interval table. | |
| INT adnDsx1FarEndIntervalNumber | 1.3.6.1.4.1.637.3.1.4.10.18.7.1.1 | INTEGER | read-only | A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| adnDsx1FarEndIntervalTable | 1.3.6.1.4.1.637.3.1.4.10.18.7 | not-accessible | The ADN DS1/E1 Far End Interval table. This table is supported by CES-T1-ESF interfaces. This table refers to ANSI T1.231. | |
| CTR adnDsx1FebeCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.6 | Counter | read-only | Number of far end block errors (FEBE). Counter #9 of the ATM core, only available on ATM-E1 and CES-E1-CRC interfaces. |
| CTR adnDsx1FeCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.4 | Counter | read-only | Number of frame bit errors (FE). Counter #5 of the ATM core, only available on ATM-E1, CES-T1 and CES-E1-Framed interfaces. |
| CTR adnDsx1FerfCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.3 | Counter | read-only | Duration of far end received failure (FERF) received from the remote equipment. FERF is also called remote alarm indication (RAI) or received yellow alarm. Counter #3 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1-Framed interfaces. |
| GAU adnDsx1IntervalAESs | 1.3.6.1.4.1.637.3.1.4.10.18.4.1.4 | Gauge | read-only | Number of errored seconds of type A at path level (ESA-P) encountered during a particular 15-minute interval. |
| GAU adnDsx1IntervalAISSs | 1.3.6.1.4.1.637.3.1.4.10.18.4.1.5 | Gauge | read-only | Number of seconds containing one or more AIS defects at path level (AISS-P) encountered during a particular 15-minute interval. |
| adnDsx1IntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.18.4.1 | not-accessible | An entry in the ADN DS1/E1 Interval table. | |
| GAU adnDsx1IntervalLLOSSs | 1.3.6.1.4.1.637.3.1.4.10.18.4.1.3 | Gauge | read-only | Number of seconds containing one or more LOS defects (LOSS-L) encountered during a particular 15-minute interval. |
| GAU adnDsx1IntervalLSESs | 1.3.6.1.4.1.637.3.1.4.10.18.4.1.2 | Gauge | read-only | Number of Severely errored seconds (SES-L) at line level encountered during a particular 15-minute interval. |
| INT adnDsx1IntervalNumber | 1.3.6.1.4.1.637.3.1.4.10.18.4.1.1 | INTEGER | read-only | A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| adnDsx1IntervalTable | 1.3.6.1.4.1.637.3.1.4.10.18.4 | not-accessible | The ADN DS1/E1 Interval table. This table is supported by CES-T1 interfaces. This table refers to ANSI T1.231. | |
| GAU adnDsx1ItuCurrentBBEs | 1.3.6.1.4.1.637.3.1.4.10.18.9.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered during the current 15-minute interval. Common Name: Background Errored Blocks |
| adnDsx1ItuCurrentEntry | 1.3.6.1.4.1.637.3.1.4.10.18.9.1 | not-accessible | An entry in the ADN DS1/E1 Current Itu table. | |
| GAU adnDsx1ItuCurrentESs | 1.3.6.1.4.1.637.3.1.4.10.18.9.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered during the current 15-minute interval. Common Name: Errored Seconds |
| GAU adnDsx1ItuCurrentSESs | 1.3.6.1.4.1.637.3.1.4.10.18.9.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered during the current 15-minute interval. Common Name: Severely Errored Seconds |
| adnDsx1ItuCurrentTable | 1.3.6.1.4.1.637.3.1.4.10.18.9 | not-accessible | The ADN DS1/E1 Current Itu table. This table is supported by CES-E1 interfaces. This table refers to ITU G.826. | |
| GAU adnDsx1ItuCurrentUASs | 1.3.6.1.4.1.637.3.1.4.10.18.9.1.7 | Gauge | read-only | The number of unavailable seconds (UAS) encountered during the current 15-minute interval. Common Name: Unavailable Time |
| GAU adnDsx1ItuDayIntervalBBEs | 1.3.6.1.4.1.637.3.1.4.10.18.11.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered during the current day (from 0 hours to the current time). |
| adnDsx1ItuDayIntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.18.11.1 | not-accessible | An entry in the DS1/E1 Day Itu table. | |
| GAU adnDsx1ItuDayIntervalESs | 1.3.6.1.4.1.637.3.1.4.10.18.11.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered during the current day (from 0 hours to the current time). |
| GAU adnDsx1ItuDayIntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.18.11.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered during the current day (from 0 hours to the current time). |
| adnDsx1ItuDayIntervalTable | 1.3.6.1.4.1.637.3.1.4.10.18.11 | not-accessible | The ADN DS1/E1 Itu Day Interval table. This table is supported by CES-E1 interfaces. This table refers to ITU G.826. | |
| GAU adnDsx1ItuDayIntervalUASs | 1.3.6.1.4.1.637.3.1.4.10.18.11.1.7 | Gauge | read-only | Number of unavailable seconds (UAS) encountered during the current day (from 0 hours to the current time). |
| GAU adnDsx1ItuFarEndCurrentBBEs | 1.3.6.1.4.1.637.3.1.4.10.18.9.1.6 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Background Errored Blocks |
| GAU adnDsx1ItuFarEndCurrentESs | 1.3.6.1.4.1.637.3.1.4.10.18.9.1.4 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Errored Seconds |
| GAU adnDsx1ItuFarEndCurrentSESs | 1.3.6.1.4.1.637.3.1.4.10.18.9.1.5 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Severely Errored Seconds |
| GAU adnDsx1ItuFarEndDayIntervalBBEs | 1.3.6.1.4.1.637.3.1.4.10.18.11.1.6 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| GAU adnDsx1ItuFarEndDayIntervalESs | 1.3.6.1.4.1.637.3.1.4.10.18.11.1.4 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| GAU adnDsx1ItuFarEndDayIntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.18.11.1.5 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| GAU adnDsx1ItuFarEndIntervalBBEs | 1.3.6.1.4.1.637.3.1.4.10.18.10.1.7 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during a particular 15-minute interval. |
| GAU adnDsx1ItuFarEndIntervalESs | 1.3.6.1.4.1.637.3.1.4.10.18.10.1.5 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during a particular 15-minute interval. |
| GAU adnDsx1ItuFarEndIntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.18.10.1.6 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during a particular 15-minute interval. |
| GAU adnDsx1ItuIntervalBBEs | 1.3.6.1.4.1.637.3.1.4.10.18.10.1.4 | Gauge | read-only | Number of background errored blocks (BBE) encountered during a particular 15-minute interval. |
| adnDsx1ItuIntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.18.10.1 | not-accessible | An entry in the ADN DS1/E1 Interval Itu table. | |
| GAU adnDsx1ItuIntervalESs | 1.3.6.1.4.1.637.3.1.4.10.18.10.1.2 | Gauge | read-only | Number of errored seconds (ES) encountered during a particular 15-minute interval. |
| INT adnDsx1ItuIntervalNumber | 1.3.6.1.4.1.637.3.1.4.10.18.10.1.1 | INTEGER | read-only | A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| GAU adnDsx1ItuIntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.18.10.1.3 | Gauge | read-only | Number of severely errored seconds (SES) encountered during a particular 15-minute interval. |
| adnDsx1ItuIntervalTable | 1.3.6.1.4.1.637.3.1.4.10.18.10 | not-accessible | The ADN DS1/E1 Itu Interval table. This table is supported by CES-E1 interfaces. This table refers to ITU G.826. | |
| GAU adnDsx1ItuIntervalUASs | 1.3.6.1.4.1.637.3.1.4.10.18.10.1.8 | Gauge | read-only | Number of unavailable seconds (UAS) encountered in a particular 15-minute interval. |
| CTR adnDsx1LcmaCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.12 | Counter | read-only | Duration of Loss of CRC Multiframe Alignment (LCMA). Counter #30 of the ATM core, only available on CES-E1-CRC interfaces. |
| CTR adnDsx1LcvCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.11 | Counter | read-only | Number of Line Code Violations (LCV). Counter #21 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1 interfaces. |
| INT adnDsx1LineHWStatus | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.7 | INTEGER | read-only | This variable indicates the hardware status of a line. The given status value corresponds to the last test initiated by setting the nominator ifTestType with adnIfTest- TypeLineHW test identifier. If the result of the test, given by the nominator ifTestResult, is different than 'success' or 'failed', the given status value is not significant. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnDsx1LineHWNoDefect bit should be set only if no other bit is set. If the status is not significant, all the bits are reset. The bit positions are: 1 lineHWNoDefect 2 BGPHT chip failure 4 not used 8 CBD chip failure on line side 8 framer chip failure on the input side 16 framer chip failure on line side |
| INT adnDsx1LineLength | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.2 | INTEGER | read-only | The length of the DS1 line in meters. This object provides information for line build out circuitry if it exists and can profitably use the information. Accuracy should be within 30 meters. For many short lines and for lines that cannot use this information, the value zero is appropriate. Line build out circuitry sets electrical power levels in the transmitter, and sensitivity in the receiver. The line length means the distance to the nearest electrical regeneration point (which could be a simple repeater, or a CSU or DACS/multiplexer, or even a direct connection to another switch, etc. There is a possibility of increased noise (or even total signal loss) if the length is not set properly. |
| INT adnDsx1LinePerfStatus | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.9 | INTEGER | read-only | This variable indicates the performance status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple status simultaneously. - The NoDefect bit should be set only if no other bit is set. - The UnavailablePeriod indicates that the interface has entered an unavailable period. - The CurrentCrossingThreshold bit indicates that one of the current statistics counter has reached its threshold. - The DayIntervalCrossingThreshold bit indicates that one of the Day Interval statistics counter has reached its threshold. The bit positions are: 1 noDefect 2 unavailablePeriod 4 currentCrossingThreshold 8 dayIntervalCrossingThreshold |
| INT adnDsx1LineStatus | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.3 | INTEGER | read-only | This variable indicates the status of the line interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnDsx1NoAlarm bit should be set only if no other bit is set. The bit positions and their corresponding ATM core counter numbers # are: # Bit Value ------------------------------------------------------ . 1 noAlarm . No alarm present 21 2 HBERError . High bit error rate (HBER) 23 4 RLBError . Loopback requested by the remote equipment 30 8 LCMAError . Loss of CRC multiframe alignment Common Name: Line Status |
| INT adnDsx1LineType | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.1 | INTEGER | read-write | The field is used to qualify the dsx1LineType. noQual - No qualification. e1Unframed - E1 with no framing |
| CTR adnDsx1LofCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.5 | Counter | read-only | Duration of loss-of-frame (LOF). Counter #7 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1-Framed interfaces. |
| CTR adnDsx1LosCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.1 | Counter | read-only | Duration of loss-of-signal (LOS). Counter #0 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1 interfaces. |
| CTR adnDsx1LsmaCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.10 | Counter | read-only | Duration of Loss of Signalling Multiframe Alignment (LSMA). Counter #19 of the ATM core, only available on CES-E1-Multiframed interfaces. |
| INT adnDsx1MsAisTest | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.4 | INTEGER | read-write | This variable is used to send a constant alarm indication signal (AIS) to the remote equipment. This object is used only for testing and debugging. This object is available for ATM T1/E1 only. Common Name: Forcing a Line Alarm Indication Signal |
| INT adnDsx1MsFerfTest | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.5 | INTEGER | read-write | This variable is used to send a constant yellow alarm signal at the frame level to the remote equipment. This object is used only for testing and debugging. This object is available for ATM T1/E1 only. Common Name: Forcing a Line FERF Signal |
| CTR adnDsx1PcvCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.7 | Counter | read-only | Path Coding Violation (PCV) Error Event. A Path Coding Violation error event is : - a frame synchronization bit error in the T1-SF and E1 no CRC formats, - a CRC-6 error in the T1-ESF format, - a CRC-4 error in the E1 CRC formats. Counter #11 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1-CRC interfaces. |
| INT adnDsx1RemLoopbackTest | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.6 | INTEGER | read-write | This variable is used to force a loopback of the line of the remote equipment |
| CTR adnDsx1RsaCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.9 | Counter | read-only | Duration of Remote Signalling Multiframe Alarm (RSA). Counter #18 of the ATM core, only available on CES-E1-Multiframed interfaces. |
| CTR adnDsx1SefCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.13 | Counter | read-only | Number of Severely Errored Frames (SEF). Counter #30 of the ATM core, only available on CES-T1 interfaces. |
| INT adnDsx1StatType | 1.3.6.1.4.1.637.3.1.4.10.18.1.1.8 | INTEGER | read-write | The field displays the standard used for computing the statistics counters. noStatistics : no statistics are available on the ds1/E1 interface ansi : ANSI T1.231 statistics are activated itu : ITU G.826 statistics are activated |
| CTR adnDsx1Ts16AisCounter | 1.3.6.1.4.1.637.3.1.4.10.18.2.1.8 | Counter | read-only | Duration of Alarm Indication Signal in time slot 16 signalling channel (TS16AIS). Counter #17 of the ATM core, only available on CES-E1-Multiframed interfaces. |
| ADN adnDumCyclicallyReduceExcess | 1.3.6.1.4.1.637.3.1.5.11.5.3 | AdnEnableDisabled | read-write | Enables and disables the cyclical reduction of excess disk storage in Disk Utilization Management's managed filesytems. Disk Utilization Management's reduction process is an adjunct of its monitoring process. The periodicity of both processes is defined by adnDumMonitorInterval. The Disk Utilization Management's managed filesystems are also defined in adnDumGroup. |
| adnDumDirectoryEntry | 1.3.6.1.4.1.637.3.1.5.11.5.10.1 | not-accessible | An entry in the Disk Utilization Management Directory Table that defines one directory and any subdirectories under the directory. | |
| INT adnDumDirectoryIndex | 1.3.6.1.4.1.637.3.1.5.11.5.10.1.1 | INTEGER | not-accessible | Index to a table of directories on which Disk Utilization Management managed filesystems have been mounted. |
| INT adnDumDirectoryLevelUsage | 1.3.6.1.4.1.637.3.1.5.11.5.10.1.4 | INTEGER | read-only | The level of usage of aggregate disk storage with respect to the three usage thresholds, low, medium and high, in the directory on which the filesystem is mounted. |
| STR adnDumDirectoryPathname | 1.3.6.1.4.1.637.3.1.5.11.5.10.1.2 | DisplayString | read-only | The complete pathname to the directory on which a managed filesystem is mounted. The complete pathname starts with and includes the root directory. By default, the directory /hss is monitored. This includes the directory /to_nms. |
| ADN adnDumDirectoryPercentUsage | 1.3.6.1.4.1.637.3.1.5.11.5.10.1.3 | AdnPercent | read-only | The percent of the aggregate disk storage that is used in the directory on which the filesystem is mounted. |
| adnDumDirectoryTable | 1.3.6.1.4.1.637.3.1.5.11.5.10 | not-accessible | The Disk Utilization Management Directory Table defines the directories and subdirectories on which the filesytems that Disk Utilization Management manages are mounted. By default, the only filesystem monitored for disk utilization is /hss (which also contains /to_nms). | |
| ADN adnDumEnable | 1.3.6.1.4.1.637.3.1.5.11.5.1 | AdnEnableDisabled | read-write | Enables and disables all Disk Utilization Management processing. |
| NTF adnDumFileReady | 1.3.6.1.4.1.637.3.1.6.1.0.27 | This trap indicates that a file that the Network Management System normally retrieves from a managed node via FTP services is ready to be transferred to the Network Management System. | ||
| INT adnDumFileRetrievalTimeLimit | 1.3.6.1.4.1.637.3.1.5.11.5.9 | INTEGER | read-write | Defines the time period that Disk Utilization Management allows the Network Management System to retrieve files from Disk Utilization Management's managed filesystems, before determining that a reminder trap is required. The unit of time for this interval is seconds. |
| ADN adnDumFlagFileReady | 1.3.6.1.4.1.637.3.1.5.11.5.6 | AdnEnableDisabled | read-write | Enables and disables Disk Utilization Management's notification to the Network Management System of overdue file retrievals from Disk Utilization Management's managed filesystems. If file retrievals are not completed within the limit, adnDumFileRetrievalTimeLimit, Disk Utilization Management considers the retrievals overdue and notifies the Network Management System via a Simple Network Management Protocol trap. The Disk Utilization Management's managed filesystems are also defined in the adnDumGroup. |
| ADN adnDumFlagThresholdViolations | 1.3.6.1.4.1.637.3.1.5.11.5.5 | AdnEnableDisabled | read-write | Enables and disables Disk Utilization Management's notification to the Network Management System of threshold violations from Disk Utilization Management's managed filesystems. Disk Utilization Management notifies the Network Management System via a Simple Network Management Protocol trap. The Disk Utilization Management's managed filesystems are also defined in the adnDumGroup. |
| adnDumGroup | 1.3.6.1.4.1.637.3.1.5.11.5 | |||
| ADN adnDumImmediatelyReduceExcess | 1.3.6.1.4.1.637.3.1.5.11.5.4 | AdnEnableDisabled | read-write | Enables and disables the immediate reduction of excessive disk storage in Disk Utilization Management's managed filesystems. Independent of its monitoring cycle, Disk Utilization Management immediately reduces excessive disk storage. Once the excess storage is reduced, Disk Utilization Management effectively sets this object to disabled. The Disk Utilization Management's managed filesystems are also defined in the adnDumGroup. |
| ADN adnDumLogEvents | 1.3.6.1.4.1.637.3.1.5.11.5.7 | AdnEnableDisabled | read-write | Enables and disables Disk Utilization Management's maintenance of a history log file in which Disk Utilization Management events are recorded. The history log file is in an ASCII format. |
| INT adnDumMonitorInterval | 1.3.6.1.4.1.637.3.1.5.11.5.8 | INTEGER | read-write | Defines the period of time between disk monitoring by Disk Utilization Management. The unit of time for this interval is seconds. |
| ADN adnDumReduceExcessDiskStorage | 1.3.6.1.4.1.637.3.1.5.11.5.2 | AdnEnableDisabled | read-write | Enables and disables all methods to reduce excessive disk storage in Disk Utilization Management managed filesystems. Methods of reduction consist of those defined by adnDumCyclicallyReduceExcess and adnDumImmediatelyReduceExcess. The Disk Utilization Management's managed filesystems are also defined in the adnDumGroup. |
| adnDumSubdirectoryEntry | 1.3.6.1.4.1.637.3.1.5.11.5.11.1 | not-accessible | An entry in the Disk Utilization Management Subdirectory Table that defines one subdirectories under a Disk Utilization Management directory. | |
| INT adnDumSubdirectoryIndex | 1.3.6.1.4.1.637.3.1.5.11.5.11.1.1 | INTEGER | not-accessible | Index to a table of subdirectories under a directory on which a Disk Utilization Management's managed filesystem has been mounted. The value of the index is directly related to order in which the subdirectories are targeted for storage reduction. The first subdirectory in the table of subdirectories that Disk Utilization Management targets for storage reduction has index 1 |
| STR adnDumSubdirectoryPathname | 1.3.6.1.4.1.637.3.1.5.11.5.11.1.2 | DisplayString | read-only | The complete pathname to the subdirectory of a Disk Utilization Management directory. The complete pathname starts with and includes the root directory. |
| ADN adnDumSubdirectoryQuota | 1.3.6.1.4.1.637.3.1.5.11.5.11.1.3 | AdnPercent | read-write | The percent of the aggregate disk storage that is allocated to the subdirectory of the filesystem on which the parent directory is mounted. The default quota for the /hss/to_nms/perf subdirectory is 10 percent, meaning that on a first pass of the reduction cycle, old statistics files will be deleted until the /hss/to_nms/perf subdirectory is using no more than 10 percent of the total partition size. The default quota for the /hss/to_nms/fault subdirectory is 10 percent. The default quota for the /hss/to_nms/acct subdirectory is 100 percent, meaning that no accounting files will be deleted by this process. |
| adnDumSubdirectoryTable | 1.3.6.1.4.1.637.3.1.5.11.5.11 | not-accessible | The Disk Utilization Management Subdirectory Table defines the subdirectories under a Disk Utilization Management directory. A filesytem that Disk Utilization Management manages is mounted on the Disk Utilization Management directory. By default, the subdirectories under /hss which are monitored are: /hss/to_nms/perf (first priority is to delete old historical stats files.) /hss/to_nms/fault (second priority is to delete old alarm files.) /hss/to_nms/acct (third priority is to delete old accounting files, but only if the quota for accoutning is less than the default value of 100 percent.) | |
| NTF adnDumThresholdViolation | 1.3.6.1.4.1.637.3.1.6.1.0.26 | This trap indicates that one of the thresholds for disk utilization in the managed filesystem under Disk Utilization Management in the Node Management Subsystem was violated. | ||
| INT adnDumUsageThresholds | 1.3.6.1.4.1.637.3.1.5.11.5.10.1.5 | INTEGER | read-write | A set of low, medium and high limits to the amount of the aggregate disk storage that is utilized in a managed filesystem. Each value represents a percentage of the whole amount that is allocated to the particular filesystem. |
| STR adnEepromBoardName | 1.3.6.1.4.1.637.3.1.5.15.3.1.2 | DisplayString | read-only | This indicates the card type mnemonic. |
| adnEepromEntry | 1.3.6.1.4.1.637.3.1.5.15.3.1 | not-accessible | An entry in the EEPROM table. There is one entry for a given board, as there is one EEPROM on each board. The index corresponds to equipment type 'card' in the adnEquipTable. | |
| STR adnEepromFlashIdentifier | 1.3.6.1.4.1.637.3.1.5.15.3.1.6 | DisplayString | read-only | This identifies the software loaded on flash EPROM. |
| STR adnEepromIcs | 1.3.6.1.4.1.637.3.1.5.15.3.1.4 | DisplayString | read-only | This indicates the Item Change Status of the card. |
| STR adnEepromIcsChangeDate | 1.3.6.1.4.1.637.3.1.5.15.3.1.5 | DisplayString | read-only | This indicates the date of application of a change order. |
| STR adnEepromLastRepairDate | 1.3.6.1.4.1.637.3.1.5.15.3.1.7 | DisplayString | read-only | This indicates the date of most recent repair. |
| STR adnEepromPartNumberAndVariant | 1.3.6.1.4.1.637.3.1.5.15.3.1.3 | DisplayString | read-only | This indicates the Alcatel code for the card and its variant. |
| STR adnEepromSerialNumber | 1.3.6.1.4.1.637.3.1.5.15.3.1.1 | DisplayString | read-only | This indicates the serial number of the card. |
| adnEepromTable | 1.3.6.1.4.1.637.3.1.5.15.3 | not-accessible | This table is the EEPROM table. | |
| STR adnEepromWarrantyEndDate | 1.3.6.1.4.1.637.3.1.5.15.3.1.8 | DisplayString | read-only | This indicates the date of end of warranty. |
| adnEnvAcx | 1.3.6.1.4.1.637.3.1.8.7 | |||
| adnEnvHss | 1.3.6.1.4.1.637.3.1.8.5 | |||
| adnEnvironment | 1.3.6.1.4.1.637.3.1.8 | |||
| adnEnvPsx | 1.3.6.1.4.1.637.3.1.8.6 | |||
| adnEnvTp3000 | 1.3.6.1.4.1.637.3.1.8.4 | |||
| adnEnvTp4800 | 1.3.6.1.4.1.637.3.1.8.3 | |||
| adnEnvTp4900 | 1.3.6.1.4.1.637.3.1.8.1 | |||
| adnEnvTp8000 | 1.3.6.1.4.1.637.3.1.8.2 | |||
| ADN adnEquipCause | 1.3.6.1.4.1.637.3.1.6.5.8 | AdnEquipCause | not-accessible | This variable indicates the specific cause of the problem which has occurred on the equipment (chassis or board). |
| INT adnEquipControlHistory | 1.3.6.1.4.1.637.3.1.5.1.1.13 | INTEGER | read-write | The adnEquipControlHistory object is a bitmap that provides information about the cause of the last restart, switchover to spare and switchback to primary. It may be cleared by setting it to 0; no other SNMP Set operations are allowed. bit val meaning --- ------------------------------------------------------- 1 restartDueToUpdate last restart due to code or configuration update 2 restartFromOperator operator initiated last restart 4 restartDueToFailure last restart was caused by a board or node failure 8 restartDueToNode last restart caused by a node level restart; if not set, restart was at the board level 16 switchoverFromOperator operator initiated last switchover 32 switchbackFromOperator operator initiated last switchback |
| INT adnEquipControlOptions | 1.3.6.1.4.1.637.3.1.5.1.1.14 | INTEGER | read-write | The adnEquipControlOptions object provides a mechanism for controlling future reactions of the equipment. It is a bitmap of options; a value of 0 indicates that no options are in effect. bit value meaning ----- ----------------------------------------------------- 1 debugAfterCrash - place in debug mode after crash; do not reload operational code after crash. For instance, only allow viewing of a card's data structures) |
| INT adnEquipControlStatus | 1.3.6.1.4.1.637.3.1.5.1.1.12 | INTEGER | read-write | This object provides a mechanism for controlling the status of the equipment. Its value is a bitmap of controls that determine the value of adnEquipX731Admin. A value of 0 indicates that none of the status controls are in effect. bit value meaning ----- -------------------------------------------- 1 suspend - put card (except control unit (CU)) in permanent reset 2 coldRestart - restart equipment, interrupting service - node and card (except CU) on HSS; node, card and interface on TPX 4 mildRestart - restart equipment, and do not interrupt service - only for active or standby CU card 32 initiateTest - begin test - standby CU card only 64 manualSwitchover - switch to backup - primary MSC, CIG, and BBASE cards and active CU cards only 128 manualSwitchback - switch to primary - primary MSC, CIG, and BBASE cards only 256 osRebuild - all firmware and disk contents are copied fromthe active CU card - standby CU card only The following bit values are deprecated: value meaning ------ -------------------------------------------- 8 debugModeAfterCrash (do not reload operational code after crash and allow viewing of card's data structures) 16 reserveForTest |
| adnEquipEntry | 1.3.6.1.4.1.637.3.1.5.1.1 | not-accessible | An equipment entry containing objects that represent the state of hardware, firmware, or software components. Currently only hardware components are modelled. | |
| INT adnEquipIndex | 1.3.6.1.4.1.637.3.1.5.1.1.2 | INTEGER | read-only | The index of the component this entry represents. |
| TIM adnEquipInitTime | 1.3.6.1.4.1.637.3.1.5.1.1.5 | TimeStamp | read-only | The time the component initialized with respect to the initialization of the local network management subsystem measured in hundredths of a second. It is the value of sysUpTime at the time the component entered the 'enabled' operational state. If the component initialized prior to the agent's most recent initialization, this object contains a zero value. Common name: Up Since |
| INT adnEquipInstallStatus | 1.3.6.1.4.1.637.3.1.5.1.1.11 | INTEGER | read-only | The value of this object provides additional information concerning the availability status (adnEquipX731Avail) of the equipment. It is a bitmap of installation status conditions. When the value of this object is 0, none of the status conditions are present. bit value meaning qualifies ------------ --------------------------- -------------- 1 absent 'notInstalled' 2 notConfigured 'notInstalled' 4 initializationIncomplete 'offLine' 128 incorrectConfiguration 'failed' The following bit positions are deprecated: bit value meaning qualifies ------------ --------------------------- -------------- 8 operatorInitiatedLastRestart any setting 16 initializationRequired 'offLine' 32 reservedForTest 'inTest' 64 testInitiated 'inTest' |
| TIM adnEquipLastChange | 1.3.6.1.4.1.637.3.1.5.1.1.4 | TimeStamp | read-only | The value of sysUpTime at the time the component entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. Common name: Last Change Time |
| adnEquipment | 1.3.6.1.4.1.637.3.1.2 | |||
| NTF adnEquipStatusChange | 1.3.6.1.4.1.637.3.1.6.1.0.1 | This trap signifies that the indicated equipment has changed state. The trap is sent only if adnEquipTrapEnableMask has the bit set for the state or status that changed. | ||
| OID adnEquipSubType | 1.3.6.1.4.1.637.3.1.5.1.1.3 | AutonomousType | read-only | A more specific indication of the type of component this entry represents. For example, when adnEquipType is 'card' adnEquipSubType might be 'adnHbcp8'. If this information is not present, its value is set to the OBJECT IDENTIFIER { 0 0 }. Common name: Type |
| INT adnEquipSwitchbackOptions | 1.3.6.1.4.1.637.3.1.5.1.1.18 | INTEGER | read-write | The adnEquipSwitchbackOptions object provides the options in effect for the next switchback to primary. It is only significant for primary equipment and if the adnEquipSwitchoverOptions object is different from 'noSwitch'. other : used for configuration purpose when adnEquipSwitchoverOptions value is 'noSwitch', also used for Control Unit and BBSYN card. coldManual : used for primary MSC, CIG and BBASE card. coldSemiautomatic : used for primary MSC, CIG and BBASE card. The switchback is cold when the software is not already loaded onto the card; it is the case for MSC coupler, CIG and BBASE card. With the manual option, the switchback is performed only on operator request. With the semi-automatic option, the switchover is performed on HSS supervision software request when the spare card is failed, or on operator request. |
| INT adnEquipSwitchoverOptions | 1.3.6.1.4.1.637.3.1.5.1.1.15 | INTEGER | read-write | The adnEquipSwitchoverOptions object provides the options in effect for the next switchover to spare. It is only significant for primary equipment; its value is 'noSwitch' for spares and equipment that does not support redundancy. other : not used noSwitch : used for spares and equipment that do not support redundancy coldManual : used for primary MSC, CIG and BBASE card coldAutomatic : used for primary MSC, CIG and BBASE card warmAutomatic : used for Control Unit and BBSYN card. The switchover is cold when the software is not already loaded onto the card; it is the case for MSC coupler, CIG and BBASE card. Otherwise, the switchover is warm. With the manual option, the switchover is performed only on operator request. With the automatic option, the switchover is performed on HSS supervision software request when a card is failed or on operator request. |
| adnEquipTable | 1.3.6.1.4.1.637.3.1.5.1 | not-accessible | A list of equipment entries. | |
| ADN adnEquipTrapCause | 1.3.6.1.4.1.637.3.1.5.1.1.16 | AdnEquipCause | read-only | adnEquipTrapCause contains the value of the adnEquipCause field in the last trap generated by the equipment. It indicates the specific cause of the problem that appeared on the equipment. |
| INT adnEquipTrapEnableMask | 1.3.6.1.4.1.637.3.1.5.1.1.6 | INTEGER | read-write | The value of this object is a bitmap that indicates which states and statuses should cause an adnEquipStatusChange trap to be sent. bit value state/status object (common state name) ------------ ------------------- ------------------- 1 adnEquipX731Oper (operational) 2 adnEquipX731Admin (administrative) 4 adnEquipX731Usage (usage) 8 adnEquipX731Avail (availability) 16 adnEquipInstallStatus (install) 32 adnEquipControlStatus (control) Common name: Trap Enabled |
| ADN adnEquipType | 1.3.6.1.4.1.637.3.1.5.1.1.1 | AdnEquipType | read-only | The type of component this entry represents. 1 - other 5 - chassis 2 - node 6 - processor 3 - card 7 - iosPort 4 - interface 8 - aeiPort |
| INT adnEquipX731Admin | 1.3.6.1.4.1.637.3.1.5.1.1.8 | INTEGER | read-write | The value of this object represents the administrative state of this component. Common name: Administrative |
| INT adnEquipX731Avail | 1.3.6.1.4.1.637.3.1.5.1.1.10 | INTEGER | read-only | The value of this object is a bitmap that qualifies the value of the operational and administrative states. When the value of this object is 0, none of the status conditions are present. bit value resource condition ----- ------------------ 1 inTest - undergoing a test procedure 2 failed - has an internal fault preventing its operation 4 powerOff - requires power, but is not powered on 8 offLine - requires a routine operation to put it online 16 offDuty - is inactive by an internal control process 32 dependency - cannot operate because it depends on an unavailable resource 64 degraded - service provided is degraded (speed, capacity, or etc.) 128 notInstalled - not present or incomplete 256 logFull - for a log only, indicates that it is full Common name: Availability |
| INT adnEquipX731Oper | 1.3.6.1.4.1.637.3.1.5.1.1.7 | INTEGER | read-only | The value of this object represents the operational state of this component. Common name: Operational |
| INT adnEquipX731StandbyStatus | 1.3.6.1.4.1.637.3.1.5.1.1.17 | INTEGER | read-only | The adnEquipX731StandbyStatus object describes the role of spare equipment. In particular, it indicates whether the equipment is in a standby mode or acting for another piece of equipment. coldStandby means that the equipment is not synchronized with the primary equipment; it requires initialization before it can take over the role of the primary equipment. |
| INT adnEquipX731Usage | 1.3.6.1.4.1.637.3.1.5.1.1.9 | INTEGER | read-only | The value of this object represents the usage state of this component. Common name: Usage |
| adnErrors | 1.3.6.1.4.1.637.3.1.9 | |||
| adnET | 1.3.6.1.4.1.637.3.1.2.4.4 | |||
| adnExperimental | 1.3.6.1.4.1.637.3.1.3 | |||
| adnExtensions | 1.3.6.1.4.1.637.3.1.4 | |||
| INT adnFirstIfIndex | 1.3.6.1.4.1.637.3.1.5.19.1.1 | INTEGER | read-only | The value of this object corresponds to the ifIndex of the first interface. |
| INT adnFirstNodeIndex | 1.3.6.1.4.1.637.3.1.5.19.1.2 | INTEGER | read-only | The value of this object corresponds to the adnNodeIndex of the first node. |
| NTF adnFlashBuildStatus | 1.3.6.1.4.1.637.3.1.6.1.0.25 | This trap is sent for each board whose flash volume build fails. | ||
| NTF adnFlashUpdateStatus | 1.3.6.1.4.1.637.3.1.6.1.0.24 | This trap is sent for each board whose on-line or off-line flash update fails. | ||
| STR adnFmAlarmFilePathName | 1.3.6.1.4.1.637.3.1.5.11.2.11 | DisplayString | read-only | The complete pathname of the current alarm file in the Network Management System directory which contains all alarms collected since the last posting. The complete pathname starts with and includes the root directory. |
| NTF adnFmAlarmFileReady | 1.3.6.1.4.1.637.3.1.6.1.0.4 | This trap indicates whether the alarm file, whose path the object following adnTrapCategory defines, is ready to be transferred to the NMS via FTP services. | ||
| INT adnFmAlarmPostInterval | 1.3.6.1.4.1.637.3.1.5.11.2.9 | INTEGER | read-write | Defines a time period between transfers of the alarm file to the Network Management System directory. After each transfer, the Network Management System is also notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. Each posting contains only those alarms collected since the last posting. The unit of time for this interval is minutes. Common Name: Alarm Posting Interval |
| adnFmGroup | 1.3.6.1.4.1.637.3.1.5.11.2 | |||
| ADN adnFmPostAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.10 | AdnEnableDisabled | read-write | When adnFmPostAlarm is enabled, the current file is transferred to the Network Management System directory and the Network Management System is subsequently notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. This file contains all alarms saved since the lasting posting. |
| ADN adnFmSaveAdminAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.2 | AdnEnableDisabled | read-write | Indicates whether administrative alarms received from applications are saved in the alarm file. Common Name: Save Admin Alarms |
| ADN adnFmSaveClearedAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.8 | AdnEnableDisabled | read-write | Indicates whether cleared alarms received from applications are saved in the alarm file. Common Name: Save Cleared Alarms |
| ADN adnFmSaveCriticalAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.3 | AdnEnableDisabled | read-write | Indicates whether critical alarms received from applications are saved in the alarm file. Common Name: Save Critical Alarms |
| ADN adnFmSaveCrucialAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.1 | AdnEnableDisabled | read-only | Indicates whether crucial alarms received from applications are saved in the alarm file. Common Name: Save Crucial Alarms |
| ADN adnFmSaveDiagnosticAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.7 | AdnEnableDisabled | read-write | Indicates whether diagnostic alarms received from applications are saved in the alarm file. Common Name: Save Diagnostic Alarms |
| ADN adnFmSaveMajorAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.4 | AdnEnableDisabled | read-write | Indicates whether major alarms received from applications are saved in the alarm file. Common Name: Save Major Alarms |
| ADN adnFmSaveMinorAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.5 | AdnEnableDisabled | read-write | Indicates whether minor alarms received from applications are saved in the alarm file. Common Name: Save Minor Alarms |
| ADN adnFmSaveTroubleAlarm | 1.3.6.1.4.1.637.3.1.5.11.2.6 | AdnEnableDisabled | read-write | Indicates whether trouble alarms received from applications are saved in the alarm file. Common Name: Save Trouble Alarms |
| CTR adnFrAccountInExcessFrames | 1.3.6.1.4.1.637.3.1.4.10.44.5.1.6 | Counter | read-only | This indicates the number of ingress excess frames in this reporting period for this VC. |
| CTR adnFrAccountInFrames | 1.3.6.1.4.1.637.3.1.4.10.44.5.1.4 | Counter | read-only | This indicates the number of ingress frames in this reporting period for this VC. |
| CTR adnFrAccountInSegments | 1.3.6.1.4.1.637.3.1.4.10.44.5.1.2 | Counter | read-only | This indicates the number of ingress sub-frames in this reporting period for this VC. |
| CTR adnFrAccountOutExcessFrames | 1.3.6.1.4.1.637.3.1.4.10.44.5.1.7 | Counter | read-only | This indicates the number of egress excess frames in this reporting period for this VC. |
| CTR adnFrAccountOutFrames | 1.3.6.1.4.1.637.3.1.4.10.44.5.1.5 | Counter | read-only | This indicates the number of egress frames in this reporting period for this VC. |
| CTR adnFrAccountOutSegments | 1.3.6.1.4.1.637.3.1.4.10.44.5.1.3 | Counter | read-only | This indicates the number of egress sub-frames in this reporting period for this VC. |
| INT adnFrAccountTariff | 1.3.6.1.4.1.637.3.1.4.10.44.5.1.1 | INTEGER | read-only | This indicates the tariff period for these counters. A tariff period is a designated time period during which specified billing rates apply |
| adnFrAccountVCEntry | 1.3.6.1.4.1.637.3.1.4.10.44.5.1 | not-accessible | One instance of the FRS (Frame Relay Subscriber) accounting counters. | |
| adnFrAccountVCTable | 1.3.6.1.4.1.637.3.1.4.10.44.5 | not-accessible | This is the Accounting MIB table. These are the counters that are reported in the FRS (Frame Relay Subscriber) accounting record. | |
| INT adnFrAccVCadnFrChanLineType | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.26 | INTEGER | not-accessible | This is a duplicate of adnFrChanLineType. |
| STR adnFrAccVCadnFrVCDescr | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.42 | DisplayString | not-accessible | This is a duplicate of adnFrVCDescr for use in the accounting record. Common Name: Description |
| INT adnFrAccVCadnFrVCEndptInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.45 | INTEGER | not-accessible | This is a duplicate of adnFrVCEndptInDiscards. |
| INT adnFrAccVCadnFrVCInBc | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.13 | INTEGER | not-accessible | This is a duplicate of adnFrVCInBc. |
| INT adnFrAccVCadnFrVCInBcs | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.14 | INTEGER | not-accessible | This is a duplicate of adnFrVCInBcs. |
| NUM adnFrAccVCadnFrVCLocalifIndex | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.43 | InterfaceIndex | not-accessible | This is ifIndex for the VC. |
| ADN adnFrAccVCadnFrVCLocalNodeID | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.41 | AdnRoutingID | not-accessible | This is the node ID for this VC. It is a duplicate of adnNodeRoutingID in the adnNodeTable. Common Name: Local Node ID |
| INT adnFrAccVCadnFrVCNumNodes | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.27 | INTEGER | not-accessible | This is a duplicate of adnFrVCNumNodes. |
| INT adnFrAccVCadnFrVCNumRelinks | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.11 | INTEGER | not-accessible | This is a duplicate of adnFrVCNumRelinks. |
| INT adnFrAccVCadnFrVCOutBc | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.17 | INTEGER | not-accessible | This is a duplicate of adnFrVCOutBc. |
| INT adnFrAccVCadnFrVCOutBcs | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.18 | INTEGER | not-accessible | This is a duplicate of adnFrVCOutBcs. |
| INT adnFrAccVCadnFrVCRemDlci | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.3 | INTEGER | not-accessible | This is a duplicate of adnFrVCRemDlci. |
| ADN adnFrAccVCadnFrVCRemNodeID | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.5 | AdnRoutingID | not-accessible | This is a duplicate of adnFrVCRemNodeID. |
| INT adnFrAccVCadnFrVCRemNumPlan | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.8 | INTEGER | not-accessible | This is a duplicate of adnFrVCRemNumPlan. |
| INT adnFrAccVCadnFrVCRemoteifIndex | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.44 | INTEGER | not-accessible | This is a duplicate of adnFrVCRemoteifindex |
| PHY adnFrAccVCadnFrVCRemPhysAddress | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.9 | PhysAddress | not-accessible | This is a duplicate of adnFrVCRemPhysAddress. This object is deprecated in favor of adnFrAccVCSVCCalledPartyNum. |
| INT adnFrAccVCadnFrVCSourceDest | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.10 | INTEGER | not-accessible | This is a duplicate of adnFrVCSourceDest. |
| INT adnFrAccVCadnFrVCType | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.22 | INTEGER | not-accessible | This is a duplicate of adnFrVCType. |
| INT adnFrAccVCadnFrVCUniqueConnID | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.4 | INTEGER | not-accessible | This is a duplicate of adnFrVCUniqueConnID. |
| INT adnFrAccVCadnFrVCUserOrNet | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.20 | INTEGER | not-accessible | This is a duplicate of adnFrVCUserOrNet. |
| ADN adnFrAccVCadnNodeTime | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.47 | AdnNodeTimeTicks | not-accessible | This is a duplicate of adnNodeTime. GMT (Greenwich Mean Time) when the accounting records are generated. |
| INT adnFrAccVCCallTerm | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.25 | INTEGER | not-accessible | This field is placed into the accounting record to indicate if the call has been terminated or not. For a PVC - CallTerminated = PVC has been deleted CallNotTerminated = PVC has not been deleted For a SVC - CallTerminated = call has been cleared CallNotTerminated = call has not been cleared. |
| ADN adnFrAccVCCos | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.40 | AdnFrCos | not-accessible | This indicates the Class of Service (COS) for the VC. |
| adnFrAccVCEntry | 1.3.6.1.4.1.637.3.1.4.10.44.6.1 | not-accessible | One instance of the FRS (Frame Relay Subscriber) accounting record. | |
| INT adnFrAccVCfrAccountPVCSegmentSize | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.21 | INTEGER | not-accessible | This is a duplicate of frAccountPVCSegmentSize. |
| INT adnFrAccVCfrLportNumPlan | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.6 | INTEGER | not-accessible | This is a duplicate of frLportNumPlan. |
| INT adnFrAccVCfrPVCEndptDLCIIndex | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.2 | INTEGER | not-accessible | This is a duplicate of frPVCEndptDLCIIndex. |
| INT adnFrAccVCfrPVCEndptInBe | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.15 | INTEGER | not-accessible | This is a duplicate of frPVCEndptInBe. |
| INT adnFrAccVCfrPVCEndptInCIR | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.12 | INTEGER | not-accessible | This is a duplicate of frPVCEndptInCIR. |
| INT adnFrAccVCfrPVCEndptOutBe | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.19 | INTEGER | not-accessible | This is a duplicate of frPVCEndptOutBe. |
| INT adnFrAccVCfrPVCEndptOutCIR | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.16 | INTEGER | not-accessible | This is a duplicate of frPVCEndptOutCIR. |
| STR adnFrAccVCifName | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.1 | DisplayString | not-accessible | This is a duplicate of ifName for use in the accounting record. |
| PHY adnFrAccVCifPhysAddress | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.7 | PhysAddress | not-accessible | This is a duplicate of ifPhysAddress. |
| GAU adnFrAccVCifSpeed | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.46 | Gauge | not-accessible | This is a duplicate of ifSpeed. |
| T/F adnFrAccVCPVCRegroomed | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.34 | TruthValue | not-accessible | This field indicates if the PVC has been regroomed during the current accounting period. This field is initialized as false(2) and is set to true(1) when the PVC is regroomed. After the accounting period has ended and the accounting record has been collected by the NMS, the field is set to false(2). |
| PHY adnFrAccVCSVCCalledPartyNum | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.36 | PhysAddress | not-accessible | This is the number of the party called. |
| T/F adnFrAccVCSVCCallEstablished | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.37 | TruthValue | not-accessible | This indicates whether a call was established. |
| PHY adnFrAccVCSVCCallingPartyNum | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.35 | PhysAddress | not-accessible | This is the calling party number. |
| INT adnFrAccVCSVCQ933ClearingCause | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.38 | INTEGER | not-accessible | This is the clearing cause for the SVC |
| INT adnFrAccVCSVCQ933ClearingLocation | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.39 | INTEGER | not-accessible | This is the clearing location. |
| adnFrAccVCTable | 1.3.6.1.4.1.637.3.1.4.10.44.6 | not-accessible | This table constitutes the FRS (Frame Relay Subscriber) accounting record. None of the objects in this table can be obtained via an SNMP GET command. These objects are visible only in an accounting record. Most of these objects duplicate objects in other tables. They are collected here to allow the accounting record to be sent as a single table to conserve space. | |
| INT adnFrAccVCTableInExcessFrame | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.30 | INTEGER | not-accessible | This contains the ingress excess frames count for this reporting period. |
| INT adnFrAccVCTableInFrames | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.29 | INTEGER | not-accessible | This contains the ingress frame count for this reporting period. |
| INT adnFrAccVCTableInSegments | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.28 | INTEGER | not-accessible | This contains the ingress segment count for this reporting period. |
| INT adnFrAccVCTableOutExcessFrame | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.33 | INTEGER | not-accessible | This contains the egress excess frames count for this reporting period. |
| INT adnFrAccVCTableOutFrames | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.32 | INTEGER | not-accessible | This contains the egress frame count for this reporting period. |
| INT adnFrAccVCTableOutSegments | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.31 | INTEGER | not-accessible | This contains the egress segment count for this reporting period. |
| ADN adnFrAccVCTimeEndAcct | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.23 | AdnNodeTimeStamp | not-accessible | This indicates the time this accounting record was generated for this VC. Since an accounting record has this time and the previous time (adnFrAccVCTimeStartAcct), the NMS can determine the length of time an accounting record spans. The time given in coordinated universal time (UTC). |
| ADN adnFrAccVCTimeStartAcct | 1.3.6.1.4.1.637.3.1.4.10.44.6.1.24 | AdnNodeTimeStamp | not-accessible | This indicates the time the previous accounting record was sent for this VC. Since an accounting record has this time and the current time (adnFrAccVCTimeEndAcct), the NMS can determine the length of time an accounting record spans. The time is given in coordinated universal time (UTC). |
| INT adnFRAIWConfAalType | 1.3.6.1.4.1.637.3.1.5.17.1.1.5 | INTEGER | read-only | The type of ATM Adaptation Layer used on the ATM virtual channel connection (VCC) bearing the frame relay logical line. Common Name: ATM Adaptation Layer |
| CTR adnFRAIWConfCosNrtOutErrors | 1.3.6.1.4.1.637.3.1.5.17.1.1.17 | Counter | read-only | Number of errors while transmitting Class 2 data by aafd. |
| CTR adnFRAIWConfCosNrtOutOctets | 1.3.6.1.4.1.637.3.1.5.17.1.1.15 | Counter | read-only | Number of Class 2 Octets transmitted by aafd. |
| CTR adnFRAIWConfCosNrtOutPkts | 1.3.6.1.4.1.637.3.1.5.17.1.1.16 | Counter | read-only | Number of Class 2 packets (frame or subframes) transmitted by aafd. |
| CTR adnFRAIWConfCosRtOutErrors | 1.3.6.1.4.1.637.3.1.5.17.1.1.14 | Counter | read-only | Number of errors while transmitting Class 1 data by aafd. |
| CTR adnFRAIWConfCosRtOutOctets | 1.3.6.1.4.1.637.3.1.5.17.1.1.12 | Counter | read-only | Number of Class 1 Octets transmitted by aafd. |
| CTR adnFRAIWConfCosRtOutPkts | 1.3.6.1.4.1.637.3.1.5.17.1.1.13 | Counter | read-only | Number of Class 1 packets (frame or subframes) transmitted by aafd. |
| adnFRAIWConfEntry | 1.3.6.1.4.1.637.3.1.5.17.1.1 | not-accessible | An entry in the adnFRAIWConfTable. There is one entry for each frame relay logical line. | |
| INT adnFRAIWConfInitCLP | 1.3.6.1.4.1.637.3.1.5.17.1.1.6 | INTEGER | read-only | The segmentation process of every frame for the frame relay logical line generates ATM cells. This variable defines how the cell loss priority (CLP) bit for each of those cells is initialized. The names of the valid values are borrowed from the Frame Relay Forum implementation agreements concerning FR/ATM interworking (FRF.5 and FRF.8): - mode1 : The discard eligibility bit in the Q.922 core frame is copied to the CLP bit. - mode20 : Every ATM cell's CLP bit is set to zero. This mode is the only one allowed if the FR logical line is bearing a FRANP trunk or an ISS connection. - mode21 : Every ATM cell's CLP bit is set to one. This mode is the only one allowed if the FR logical line is bearing an IP forwarding connection. Common Name: Cell Loss Priority Bit |
| NUM adnFRAIWConfIUNIifIndex | 1.3.6.1.4.1.637.3.1.5.17.1.1.1 | InterfaceIndex | read-only | The ifIndex of the internal user to network interface (I-UNI) bearing the ATM virtual channel connection (VCC) associated with this frame relay logical line. Common Name: I-UNI ifIndex |
| INT adnFRAIWConfLogLineType | 1.3.6.1.4.1.637.3.1.5.17.1.1.4 | INTEGER | read-only | The type of service using the frame relay logical line: - franpOverATM : FRANP trunking over ATM - netIWsc1 : network interworking scenario 1 (defined by FRF.5) - netIWsc2OneToOne : network interworking scenario 2 with each FR connection mapped to a single ATM virtual channel connection (defined by FRF.5) - netIWsc2ManyToOne: network interworking scenario 2 with multiple FR connections multiplexed into a single ATM virtual channel connection (defined by FRF.5) - serIW : service interworking (defined by FRF.8) - issc : NMS-ISS connection over ATM - ipfw : IP Forwarding service Common Name: Logical Line Type |
| INT adnFRAIWConfSegmMbs | 1.3.6.1.4.1.637.3.1.5.17.1.1.11 | INTEGER | read-only | The maximum number of cells transmitted at the Peak Cell Rate (PCR) in the ATM flow generated on the logical line when the segmentation process generates a variable bit rate flow. When the segmentation process generates a constant bit rate flow, the segmentation maximum burst size is set to 0. Common name: Segmentation Maximum Burst Size (MBS) |
| INT adnFRAIWConfSegmPcr | 1.3.6.1.4.1.637.3.1.5.17.1.1.9 | INTEGER | read-only | The Peak Cell Rate (PCR) of the ATM flow generated on the logical line by the segmentation process of frames. Common name: Segmentation Peak Cell Rate (PCR) |
| INT adnFRAIWConfSegmScr | 1.3.6.1.4.1.637.3.1.5.17.1.1.10 | INTEGER | read-only | The Sustainable Cell Rate (SCR) of the ATM flow generated on the logical line by the segmentation process of frames when the segmentation process generates a variable bit rate flow. When the segmentation process generates a constant bit rate flow, the segmentation SCR is set to 0. Common name: Segmentation Sustainable Cell Rate (SCR) |
| ADN adnFRAIWConfStatisticsEnable | 1.3.6.1.4.1.637.3.1.5.17.1.1.8 | AdnEnableDisabled | read-write | This indicates if historical statistics generation is enabled on the frame relay logical line. Common Name: Statistics |
| adnFRAIWConfTable | 1.3.6.1.4.1.637.3.1.5.17.1 | not-accessible | This table contains the configuration parameters of the frame relay (FR) logical line. There is one entry for each FR logical line. | |
| ADN adnFRAIWConfTrapEnable | 1.3.6.1.4.1.637.3.1.5.17.1.1.7 | AdnEnableDisabled | read-write | This indicates if trap generation is enabled on the frame relay logical line in case of reception of an over-sized AAL Service Data Unit. Common Name: Trap |
| INT adnFRAIWConfVci | 1.3.6.1.4.1.637.3.1.5.17.1.1.3 | INTEGER | read-only | The virtual connection identifier (VCI) of the ATM virtual channel connection (VCC) bearing the frame relay logical line. Common name: Virtual Channel Identifier, VCI |
| INT adnFRAIWConfVpi | 1.3.6.1.4.1.637.3.1.5.17.1.1.2 | INTEGER | read-only | The virtual path identifier (VPI) of the ATM virtual channel connection (VCC) bearing the frame relay logical line. Common Name: Virtual Path Identifier, VPI |
| adnFRAIWMIB | 1.3.6.1.4.1.637.3.1.5.17 | |||
| NTF adnFRAIWOversizedSDU | 1.3.6.1.4.1.637.3.1.6.3.0.5 | This TRAP indicates that at least one oversized AAL-SDU (ATM Adaptation Layer Service Data Unit) has been received on the indicated FR logical line. | ||
| adnFranpTrunkServiceMIB | 1.3.6.1.4.1.637.3.1.5.4.1 | |||
| INT adnFrAtmSerIWAddrDLCI | 1.3.6.1.4.1.637.3.1.5.17.2.1.4 | INTEGER | read-only | The value of this object identifies the DLCI used for this FR logical line when forwarding a frame to the FR layer. The value of this object is always equal to 16. This value is used when configuring the FR PVC of the FR access on top of this logical line. Common Name: DLCI |
| INT adnFrAtmSerIWEncapsMode | 1.3.6.1.4.1.637.3.1.5.17.2.1.3 | INTEGER | read-only | The way to handle the upper layer user protocol encapsulation on the frame relay logical line: - transparent : the encapsulations are forwarded unaltered. No fragmentation/reassembly is performed. - translation : The mapping between RFC1490 and RFC1483 is performed. No fragmentation/reassembly is performed. Common Name: Encapsulation Mode |
| adnFrAtmSerIWEntry | 1.3.6.1.4.1.637.3.1.5.17.2.1 | not-accessible | An entry in the adnFrAtmSerIWTable. There is one entry for each frame relay logical line bearing service interworking. | |
| INT adnFrAtmSerIWInitDE | 1.3.6.1.4.1.637.3.1.5.17.2.1.2 | INTEGER | read-only | This variable defines how the discard eligibility (DE) bit for each frame reassembled from cells is initialized on a FR logical line used for service interworking. The names of the valid values are borrowed from the Frame Relay Forum implementation agreement concerning FR/ATM service interworking (FRF.8): - mode20 : The DE bit is set to zero. - mode21 : The DE bit is set to one. Common Name: Discard Eligibility Bit |
| INT adnFrAtmSerIWInitEFCI | 1.3.6.1.4.1.637.3.1.5.17.2.1.1 | INTEGER | read-only | The segmentation process of every frame for the frame relay logical line generates ATM cells. This variable defines how the explicit forward congestion indication (EFCI) bit for each of those cells is initialized. The names of the valid values are borrowed from the Frame Relay Forum implementation agreement concerning FR/ATM service interworking (FRF.8): - mode1 : The FECN bit in the Q.922 core frame is copied to the EFCI bit. - mode2 : Every ATM cell's EFCI bit is set to zero. Common Name: Explicit Forward Congestion Indication Bit |
| INT adnFrAtmSerIWNetN392 | 1.3.6.1.4.1.637.3.1.5.17.2.1.9 | INTEGER | read-only | The value of this object identifies the Network- side N392 error threshold value for this logical port. Common Name: NetN392 |
| INT adnFrAtmSerIWNetN393 | 1.3.6.1.4.1.637.3.1.5.17.2.1.10 | INTEGER | read-only | The value of this object identifies the Network- side N393 monitored events count value for this logical port. Common Name: NetN393 |
| INT adnFrAtmSerIWNetT392 | 1.3.6.1.4.1.637.3.1.5.17.2.1.11 | INTEGER | read-only | The value of this object identifies the Network- side T392 polling verification timer value for this logical port. Common Name: NetT392 |
| adnFrAtmSerIWTable | 1.3.6.1.4.1.637.3.1.5.17.2 | not-accessible | This table contains the parameters of the frame relay (FR) logical line. There is one entry for each FR logical line bearing service interworking. | |
| INT adnFrAtmSerIWUserN391 | 1.3.6.1.4.1.637.3.1.5.17.2.1.5 | INTEGER | read-only | The value of this object identifies the User-side N391 full status polling cycle value for this logical port. Common Name: userN391 |
| INT adnFrAtmSerIWUserN392 | 1.3.6.1.4.1.637.3.1.5.17.2.1.6 | INTEGER | read-only | The value of this object identifies the User-side N392 error threshold value for this logical port. Common Name: userN392 |
| INT adnFrAtmSerIWUserN393 | 1.3.6.1.4.1.637.3.1.5.17.2.1.7 | INTEGER | read-only | The value of this object identifies the User-side N393 monitored events count value for this logical port. Common Name: userN393 |
| INT adnFrAtmSerIWUserT391 | 1.3.6.1.4.1.637.3.1.5.17.2.1.8 | INTEGER | read-only | The value of this object identifies the User-side T391 link integrity verification polling timer value for this logical port. Common Name: userT391 |
| ADN adnFrChanAccounting | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.2 | AdnEnableDisabled | read-write | This indicates if accounting is enabled for the VCs on this channel. Common Name: Accounting |
| ADN adnFrChanBAT | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.1 | AdnPercent | read-only | This is the bandwidth allocation threshold for the channel. A value exceeding 80% is not recommended for sustained traffic loads. Common Name: BAT(%) |
| INT adnFrChanBwAllocated | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.63 | INTEGER | read-only | This is the bandwidth allocated to all VCs on this channel. |
| INT adnFrChanBwAvail | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.64 | INTEGER | read-only | This is the bandwidth available to this channel. |
| ADN adnFrChanCongsState | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.5 | AdnCongestLevels | read-only | This indicates the congestion level of this channel in the egress direction. Depending on the congestion level, some frames may be discarded. Frames are discarded according to a priority scheme. Note that an idle channel may also be classified as congested due to restricted internal resources. Common Name: Egress Congestion Level |
| INT adnFrChanCosNrtBcEgress | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.61 | INTEGER | read-only | This is the sum of committed egress bandwidth for Class of Service (COS) 'cosNrt(2)'. Common Name: COS Non Real Time Bc Commit Egress |
| INT adnFrChanCosNrtBcIngress | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.62 | INTEGER | read-only | This is the sum of committed ingress bandwidth for Class of Service (COS) 'cosNrt(2)'. Common Name: COS Non Real Time Bc Commit Ingress |
| INT adnFrChanCosRtBcEgress | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.59 | INTEGER | read-only | This is the sum of committed egress bandwidth for Class of Service (COS) 'cosRt(1)'. Common Name: COS Real Time Commit Egress |
| INT adnFrChanCosRtBcIngress | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.60 | INTEGER | read-only | This is the sum of committed ingress bandwidth for Class of Service (COS) 'cosRt(1)'. Common Name: COS Real Time Bc Commit Ingress |
| ADN adnFrChanDefaultCos | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.54 | AdnFrCos | read-write | This indicates the Class of Service (COS) for this channel. adnFrChanDefaultCos will be used for SVCs and all VCs received through a TPX Gateway. PVCs will use the COS defined in adnFrVCCos. |
| T/F adnFrChanDelaySensitive | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.20 | TruthValue | read-only | This field indicates whether VCs set up on this channel are delay sensitive. If this field is set to 'true(1)' then path selection for all VCs on this channel will be based on the criterion (delay, monetary cost, hops). Otherwise the value of adnFrVCDelaySensitive for each VC will be used. |
| NTF adnFrChanDiscardOff | 1.3.6.1.4.1.637.3.1.6.2.0.8 | Exit from frame relay data discarded at the channel level because of network congestion. | ||
| NTF adnFrChanDiscardOn | 1.3.6.1.4.1.637.3.1.6.2.0.7 | Indicates frame relay data is being discarded at the channel level because of network congestion. | ||
| adnFrChanEntry | 1.3.6.1.4.1.637.3.1.4.10.44.1.1 | not-accessible | An entry in the channel table. There will be one entry for each FRS (Frame Relay Service) channel configured. | |
| INT adnFrChanInBc | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.12 | INTEGER | read-only | This contains the ingress Bc (committed data rate) of all calls that are active on this channel. |
| INT adnFrChanInBcs | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.13 | INTEGER | read-only | This contains the ingress Bcs (statistically-committed data rate) of all calls that are active on this channel. |
| INT adnFrChanInBe | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.14 | INTEGER | read-only | This contains the ingress Be (excess burst data rate) of all calls that are active on this channel. |
| INT adnFrChanInCIR | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.11 | INTEGER | read-only | This contains the ingress CIR (committed information rate) of all calls that are active on this channel. |
| INT adnFrChanLineType | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.4 | INTEGER | read-only | This indicates if this channel is a FRIC (frame relay interface code) or FRAD (frame relay assembler/disassembler) or a frx channel. FRIC allows devices to use the frame relay backbone with Q.922A frames. FRAD allows any HDLC-compatible device to use frame relay by encapsulating the HDLC frame with the required Q.922A frame. FRX allows PSX switches to connect to a HSS switch as a special access devices. IP (Internet Protocol) indicates this channel allows IP services. Common Name: Line Type |
| INT adnFrChanMaxBcAllPVCs | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.57 | INTEGER | read-only | This field represents the maximum value of adnFrVCOutBc of all PVCs configured for the channel. |
| INT adnFrChanMaxBcsAllPVCs | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.58 | INTEGER | read-only | This field represents the maximum value of adnFrPVCOutBcs of all PVCs configured for the channel. |
| INT adnFrChanNumCallActive | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.19 | INTEGER | read-only | This contains the number of calls that are active on this channel. This only includes calls that are in the data transfer state. The object adnFrVCOperState will be 'up(1)'. |
| INT adnFrChanNumofMSN | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.55 | INTEGER | read-only | This specifies the number of Multiple Subscriber Numbers (MSN) that can be configured on this channel. |
| INT adnFrChanNxMultiBc | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.56 | INTEGER | read-write | This indicates the number of times Bc (committed data rate) can be over-subscribed for user traffic on this channel. Common Name: # Times Over Subscribe Bc |
| INT adnFrChanNxOverBcs | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.9 | INTEGER | read-only | This indicates the number of times Bcs (statistically- committed data rate) can be over-subscribed for user traffic on this channel. Common Name: # Times Over Subscribe Bcs |
| INT adnFrChanNxOverBe | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.10 | INTEGER | read-only | This indicates the number of times Be (excess burst data rate) can be over-subscribed for user traffic on this channel. Common Name: # Times Over Subscribe Be |
| INT adnFrChanOutBc | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.16 | INTEGER | read-only | This contains the egress Bc of all calls that are active on this channel. |
| INT adnFrChanOutBcs | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.17 | INTEGER | read-only | This contains the egress Bcs of all calls that are active on this channel. |
| INT adnFrChanOutBe | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.18 | INTEGER | read-only | This contains the egress Be of all calls that are active on this channel. |
| INT adnFrChanOutCIR | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.15 | INTEGER | read-only | This contains the egress CIR (Committed Information Rate) of all calls that are active on this channel. |
| INT adnFrChanProced | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.6 | INTEGER | read-only | The value of this object identifies the LIS (local in-channel signalling) procedure that is used for this UNI/NNI logical port. The UNI/NNI logical port can be performing user-to-network network-side procedures, bidirectional, user-to-network user-side procedures, or other. This object is configured and replaces frMgtVCSigProced, which is not configured. frMgtVCSigProced is readable via SNMP and mirrors this object. Common Name: LIS Interface |
| INT adnFrChanPVCBidirHigh | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.24 | INTEGER | read-write | The value of this object is used to indicate the higher number for the range of bi-directional PVC DLCIs. This number is only valid if adnFrChanVCTypeConfigured allows PVCs on this channel and adnFrChanPVCMaxNumAllowed is greater than 0. |
| INT adnFrChanPVCBidirLow | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.23 | INTEGER | read-write | The value of this object is used to indicate the lower number for the range of bi-directional PVC DLCIs. This number is only valid if adnFrChanVCTypeConfigured allows PVCs on this channel and adnFrChanPVCMaxNumAllowed is greater than 0. |
| INT adnFrChanPVCMaxAggActCIR | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.51 | INTEGER | not-accessible | Maximum aggregate CIR for active PVCs. |
| INT adnFrChanPVCMaxAggNormBe | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.53 | INTEGER | not-accessible | Maximum aggregate normalized Be (Bc/Tc) for active PVCs. |
| INT adnFrChanPVCMaxNumAllowed | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.22 | INTEGER | read-write | This is the maximum number of PVCs that can be configured on the channel. |
| ADN adnFrChanStatistics | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.3 | AdnEnableDisabled | read-write | This indicates if statistics are enabled for this channel. When enabled, performance information is reported to the NMS. Common Name: Statistics |
| INT adnFrChanSVCAddrLenIg | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.42 | INTEGER | read-only | This specifies the number of least significant bits in the address field of the Q.933 SETUP/CONNECT message should be ignored. |
| ADN adnFrChanSVCAddrValid | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.41 | AdnEnableDisabled | read-only | This specifies whether the calling party address in the setup message will be compared to the source channel address(es) and whether the connected number in the connect message will be compared to the destination channel address(es). |
| INT adnFrChanSVCBidirHigh | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.27 | INTEGER | read-write | The value of this object is used to indicate the higher number for the range of bi-directional SVC DLCIs. This number is only valid if adnFrChanVCTypeConfigured allows SVCs on this channel and adnFrChanSVCMaxNumAllowed is greater than 0. |
| INT adnFrChanSVCBidirLow | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.26 | INTEGER | read-write | The value of this object is used to indicate the lower number for the range of bi-directional SVC DLCIs. This number is only valid if adnFrChanVCTypeConfigured allows SVCs on this channel and adnFrChanSVCMaxNumAllowed is greater than 0. |
| INT adnFrChanSVCCurrentActive | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.44 | INTEGER | not-accessible | Count of the current number of active SVCs. |
| INT adnFrChanSVCFailedClrDTE | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.47 | INTEGER | not-accessible | Count of failed SVCs that were cleared by the DTE. |
| INT adnFrChanSVCFailedClrNet | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.46 | INTEGER | not-accessible | Count of failed SVCs that were cleared by the network. |
| ADN adnFrChanSVCInCallBr | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.39 | AdnEnableDisabled | read-only | This specifies that call setup messages incoming to the DTE (from the frame relay network) are not allowed and will be cleared at the destination. Common Name: Incoming Calls Barred. |
| INT adnFrChanSVCMaxAggActCIR | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.50 | INTEGER | not-accessible | Maximum aggregate CIR for active SVCs. |
| INT adnFrChanSVCMaxAggNormBe | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.52 | INTEGER | not-accessible | Maximum aggregate normalized Be (Bc/Tc) for active SVCs. |
| INT adnFrChanSVCMaxNumActive | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.43 | INTEGER | not-accessible | This is the count of the maximum number of SVCs active at one time. |
| INT adnFrChanSVCMaxNumAllowed | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.25 | INTEGER | read-write | This is the maximum number of SVC user calls allowed on the channel. |
| ADN adnFrChanSVCOutCallBr | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.40 | AdnEnableDisabled | read-only | This specifies that call setup messages outgoing from the DTE (to the frame relay network) are not allowed and will be cleared at the source. Common Name: Outgoing Calls Barred. |
| INT adnFrChanSVCSuccessClrDTE | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.49 | INTEGER | not-accessible | Count of the successful SVCs cleared by the DTE. |
| INT adnFrChanSVCSuccessClrNet | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.48 | INTEGER | not-accessible | Count of successful SVCs cleared by the network. |
| INT adnFrChanSVCT303 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.29 | INTEGER | read-only | This timer specifies the amount of time to wait for a setup response. If the timer expires, then the setup message is retransmitted. The timer value is expressed in seconds. |
| INT adnFrChanSVCT305 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.30 | INTEGER | read-only | This timer specifies the amount of time to wait for a disconnect response. If the timer expires, then the release message is transmitted. The timer value is expressed in seconds. |
| INT adnFrChanSVCT308 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.31 | INTEGER | read-only | This timer specifies the amount of time to wait for a release response. If the timer expires the first time, then the release message is retransmitted. The timer value is expressed in seconds. |
| INT adnFrChanSVCT309 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.32 | INTEGER | read-only | This data link timer specifies the amount of time to wait for re-establishment of the LAPD (link access procedure on the D-channel) link. If the timer expires, all calls will be cleared. Otherwise, calls in stable states are not lost. The timer value is expressed in seconds. |
| INT adnFrChanSVCT310 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.33 | INTEGER | read-only | This timer specifies the amount of time to wait for a connect or disconnect after receiving a Call Proceeding. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds. |
| INT adnFrChanSVCT313 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.34 | INTEGER | read-only | This timer specifies the amount of time to wait for a connect response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds. |
| INT adnFrChanSVCT315 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.35 | INTEGER | read-only | This timer specifies the amount of time to wait for a status inquiry response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds. |
| INT adnFrChanSVCT316 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.36 | INTEGER | read-only | This timer specifies the amount of time to wait for a restart response. If the timer expires, then the restart message is re-transmitted. The timer value is expressed in seconds. |
| INT adnFrChanSVCT317 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.37 | INTEGER | read-only | Reserved for future use. This restart confirm timer specifies the amount of time to wait for clearing all the calls. The timer value is expressed in seconds. |
| INT adnFrChanSVCT320 | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.38 | INTEGER | read-only | Reserved for future use. This inactivity timer specifies the amount of time to wait for a response to a call. The timer value is expressed in seconds. |
| INT adnFrChanSVCTotalProcessed | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.45 | INTEGER | not-accessible | Count of the total number of SVCs that have been processed. |
| INT adnFrChanSVCUserNetFlg | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.28 | INTEGER | read-only | This indicates whether the interface follows the user or network side of the protocol recommendations. Common Name: User/Network Protocol. |
| adnFrChanTable | 1.3.6.1.4.1.637.3.1.4.10.44.1 | not-accessible | This table is an extension of the Frame Relay Management Signalling Group table and the Frame Relay Logical Port Group table from RFC1604. | |
| ADN adnFrChanVCTraps | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.7 | AdnEnableDisabled | read-write | This indicates whether or not VC-level traps and alarms are reported for this channel. If disabled, then no VC-level traps or alarms will be reported by any VC on this channel. Common Name: VC Traps |
| INT adnFrChanVCTypeConfigured | 1.3.6.1.4.1.637.3.1.4.10.44.1.1.21 | INTEGER | read-only | This object specifies the types of VCs allowed on this channel/port. |
| ADN adnFrCosAdminStatus | 1.3.6.1.4.1.637.3.1.4.10.44.9.1.2 | AdnFrCosAdminStatus | read-write | This object provides a mechanism for controlling the status of Class of Service (COS). Set to 'locked(2)' it will cause any new calls to this Class of Service be rejected. Set to 'unlocked(1)' it will cause resumption of the normal operation. |
| adnFrCosEntry | 1.3.6.1.4.1.637.3.1.4.10.44.9.1 | not-accessible | An entry in the table. There will be one entry for each FRS (Frame Relay Service) channel configured. | |
| ADN adnFrCosIndex | 1.3.6.1.4.1.637.3.1.4.10.44.9.1.1 | AdnFrCos | read-only | The Cos (Class Of Service) index for a specific class of service managed by this frame relay interface. |
| ADN adnFrCosOperStatus | 1.3.6.1.4.1.637.3.1.4.10.44.9.1.3 | AdnFrCosOperStatus | read-only | This object indicates the operational status of Class of Service (COS). A value of 'locked(2)' indicates that any new calls will be rejected for this Class of Service (COS). A value of 'unlocked(1)' indicates normal operation. |
| adnFrCosTable | 1.3.6.1.4.1.637.3.1.4.10.44.9 | not-accessible | This table contains the Class Of Service (COS) information at the channel level for FRS (Frame Relay Service). | |
| NTF adnFrDiscardOff | 1.3.6.1.4.1.637.3.1.6.2.0.6 | Exit from frame relay data discarded because of network congestion. | ||
| NTF adnFrDiscardOn | 1.3.6.1.4.1.637.3.1.6.2.0.5 | Indicates frame relay data is being discarded because of network congestion. | ||
| adnFrForceEntry | 1.3.6.1.4.1.637.3.1.4.10.44.4.1 | not-accessible | This is one entry of the Forced Path table for the specified PVC. | |
| INT adnFrForceFlag | 1.3.6.1.4.1.637.3.1.4.10.44.4.1.3 | INTEGER | read-only | This flag indicates if this is the preferred or required path. If this flag is set to 'preferred(1)', and the interface designated by adnFrForceOutifindex is not available, then alternate interfaces are tried. If this is set to 'required(2)', and the designated interface is not available, then no additional interfaces are attempted and the call is cleared. |
| INT adnFrForceHop | 1.3.6.1.4.1.637.3.1.4.10.44.4.1.1 | INTEGER | read-only | This is the hop indicator. The value is '1' in the source node and increments for each hop through the network. |
| ADN adnFrForceNode | 1.3.6.1.4.1.637.3.1.4.10.44.4.1.2 | AdnRoutingID | read-only | This is the routing node ID of the next node in this forced path. It is required for every entry in the Forced Path table. |
| INT adnFrForceOutifindex | 1.3.6.1.4.1.637.3.1.4.10.44.4.1.4 | INTEGER | read-only | This specifies the ifIndex of the interface that the call should use when exiting this node. If adnFrForceFlag has the value 'required(2)', then this interface MUST be used. If adnFrForceFlag is set to 'preferred(1), an alternate interface can be used to get to the next node identified by adnFrForceNode if this interface is unavailable. |
| adnFrForceRoute | 1.3.6.1.4.1.637.3.1.4.10.44.4 | not-accessible | This table describes the forced path to be used for this PVC. | |
| INT adnFrFrcNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.10.44.4.1.6 | INTEGER | read-only | The area number part of the adnFrForceNode, the routing node ID of the next node in this forced path. |
| INT adnFrFrcNodeMacNum | 1.3.6.1.4.1.637.3.1.4.10.44.4.1.5 | INTEGER | read-only | The machine number part of the adnFrForceNode, the routing node ID of the next node in this forced path. |
| adnFrnetservMIB | 1.3.6.1.4.1.637.3.1.4.10.44 | |||
| INT adnFrPVCEndptXmitdSigStatus | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.47 | INTEGER | read-only | The value of this object identifies the PVC status sent via the local in-channel signaling procedures for this PVC end-point. If the logical port is performing only user-side procedures, or if the interface is inoperative, then this value should be 'none(4)'. |
| adnFrReachAddrEntry | 1.3.6.1.4.1.637.3.1.4.10.44.8.1 | not-accessible | An entry in the adnFrReachAddrTable. There is one entry for each element of the list. | |
| INT adnFrReachAddrIndex | 1.3.6.1.4.1.637.3.1.4.10.44.8.1.1 | INTEGER | not-accessible | The index of an element in the list. |
| PHY adnFrReachAddrNumber | 1.3.6.1.4.1.637.3.1.4.10.44.8.1.4 | PhysAddress | read-only | The complete address or address prefix of a location reachable through this access interface (port/channel). |
| INT adnFrReachAddrNumberLength | 1.3.6.1.4.1.637.3.1.4.10.44.8.1.3 | INTEGER | read-only | The number of digits of the prefix address specified in adnFrReachAddrNumber. |
| INT adnFrReachAddrNumPlan | 1.3.6.1.4.1.637.3.1.4.10.44.8.1.2 | INTEGER | read-only | The numbering plan of the complete address or address prefix specified in adnFrReachAddrNumber. Common Names: Numbering Plan, Num Plan. |
| adnFrReachAddrTable | 1.3.6.1.4.1.637.3.1.4.10.44.8 | not-accessible | This table contains the list of complete addresses and/or address prefixes configured for this access interface (port/channel) if the Multiple Subscriber Number (MSN) service is used. | |
| INT adnFrStatVCadnFrVCAdminState | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.25 | INTEGER | not-accessible | This is a duplicate of adnFrVCAdminState. |
| INT adnFrStatVCadnFrVCBcInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.33 | INTEGER | not-accessible | This is a duplicate of adnFrVCBcInDiscards. |
| INT adnFrStatVCadnFrVCBcOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.36 | INTEGER | not-accessible | This is a duplicate of adnFrVCBcOutDiscards. |
| INT adnFrStatVCadnFrVCBcsInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.32 | INTEGER | not-accessible | This is a duplicate of adnFrVCBcsInDiscards. |
| INT adnFrStatVCadnFrVCBcsOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.35 | INTEGER | not-accessible | This is a duplicate of adnFrVCBcsOutDiscards. |
| INT adnFrStatVCadnFrVCBeInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.31 | INTEGER | not-accessible | This is a duplicate of adnFrVCBeInDiscards. |
| INT adnFrStatVCadnFrVCBeOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.34 | INTEGER | not-accessible | This is a duplicate of adnFrVCBeOutDiscards. |
| STR adnFrStatVCadnFrVCDescr | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.43 | DisplayString | not-accessible | This is a duplicate of adnFrVCDescr. |
| INT adnFrStatVCadnFrVCDiscardLisIn | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.37 | INTEGER | not-accessible | This is a duplicate of adnFrVCDiscardLisIn. |
| INT adnFrStatVCadnFrVCFrameIN | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.27 | INTEGER | not-accessible | This is a duplicate of adnFrVCFrameIN. |
| INT adnFrStatVCadnFrVCFrameOUT | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.28 | INTEGER | not-accessible | This is a duplicate of adnFrVCFrameOUT. |
| INT adnFrStatVCadnFrVCInBc | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.13 | INTEGER | not-accessible | This is a duplicate of adnFrVCInBc. |
| INT adnFrStatVCadnFrVCInBcs | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.14 | INTEGER | not-accessible | This is a duplicate of adnFrVCInBcs. |
| ADN adnFrStatVCadnFrVCInCongsState | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.38 | AdnCongestLevels | not-accessible | This is a duplicate of adnFrVCInCongsState. |
| INT adnFrStatVCadnFrVCISR | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.20 | INTEGER | not-accessible | This is a duplicate of adnFrVCISR. |
| INT adnFrStatVCadnFrVCNumNodes | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.40 | INTEGER | not-accessible | This is a duplicate of adnFrVCNumNodes. |
| INT adnFrStatVCadnFrVCNumRelinks | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.11 | INTEGER | not-accessible | This is a duplicate of adnFrVCNumRelinks. |
| INT adnFrStatVCadnFrVCOperState | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.26 | INTEGER | not-accessible | This is a duplicate of adnFrVCOperState. |
| INT adnFrStatVCadnFrVCOutBc | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.17 | INTEGER | not-accessible | This is a duplicate of adnFrVCOutBc. |
| INT adnFrStatVCadnFrVCOutBcs | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.18 | INTEGER | not-accessible | This is a duplicate of adnFrVCOutBcs. |
| INT adnFrStatVCadnFrVCRemDlci | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.3 | INTEGER | not-accessible | This is a duplicate of adnFrVCRemDlci. |
| ADN adnFrStatVCadnFrVCRemNodeID | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.5 | AdnRoutingID | not-accessible | This is a duplicate of adnFrVCRemNodeID. |
| INT adnFrStatVCadnFrVCRemNumPlan | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.8 | INTEGER | not-accessible | This is a duplicate of adnFrVCRemNumPlan. |
| INT adnFrStatVCadnFrVCRemoteifindex | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.2 | INTEGER | not-accessible | This is a duplicate of adnFrVCRemoteifindex. |
| PHY adnFrStatVCadnFrVCRemPhysAddress | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.9 | PhysAddress | not-accessible | This is a duplicate of adnFrVCRemPhysAddress. |
| INT adnFrStatVCadnFrVCSourceDest | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.10 | INTEGER | not-accessible | This is a duplicate of adnFrVCSourceDest. |
| INT adnFrStatVCadnFrVCSubFrameIN | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.29 | INTEGER | not-accessible | This is a duplicate of adnFrVCSubFrameIN. |
| INT adnFrStatVCadnFrVCSubFrameOUT | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.30 | INTEGER | not-accessible | This is a duplicate of adnFrVCSubFrameOUT. |
| INT adnFrStatVCadnFrVCType | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.23 | INTEGER | not-accessible | This is a duplicate of adnFrVCType. |
| INT adnFrStatVCadnFrVCUniqueConnID | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.4 | INTEGER | not-accessible | This is a duplicate of adnFrVCUniqueConnID. |
| INT adnFrStatVCadnFrVCUserOrNet | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.21 | INTEGER | not-accessible | This is a duplicate of adnFrVCUserOrNet. |
| ADN adnFrStatVCadnNodeTime | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.24 | AdnNodeTimeTicks | not-accessible | This is a duplicate of adnNodeTime. |
| adnFrStatVCEntry | 1.3.6.1.4.1.637.3.1.4.10.44.7.1 | not-accessible | One instance of the FRS (Frame Relay Service) connection statistics record | |
| INT adnFrStatVCfrAccountPVCSegmentSize | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.22 | INTEGER | not-accessible | This is a duplicate of frAccountPVCSegmentSize. |
| INT adnFrStatVCfrLportNumPlan | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.6 | INTEGER | not-accessible | This is a duplicate of frLportNumPlan. |
| INT adnFrStatVCfrPVCEndptDLCIIndex | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.39 | INTEGER | not-accessible | This is a duplicate of frPVCEndptDLCIIndex. |
| INT adnFrStatVCfrPVCEndptInBe | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.15 | INTEGER | not-accessible | This is a duplicate of frPVCEndptInBe. |
| INT adnFrStatVCfrPVCEndptInCIR | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.12 | INTEGER | not-accessible | This is a duplicate of frPVCEndptInCIR. |
| INT adnFrStatVCfrPVCEndptInOctets | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.41 | INTEGER | not-accessible | This is a duplicate of frPVCEndPtInOCtets |
| INT adnFrStatVCfrPVCEndptOutBe | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.19 | INTEGER | not-accessible | This is a duplicate of frPVCEndptOutBe. |
| INT adnFrStatVCfrPVCEndptOutCIR | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.16 | INTEGER | not-accessible | This is a duplicate of frPVCEndptOutCIR. |
| INT adnFrStatVCfrPVCEndptOutOctets | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.42 | INTEGER | not-accessible | This is a duplicate of frPVCEndPtOutOctets |
| STR adnFrStatVCifName | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.1 | DisplayString | not-accessible | This is a duplicate of ifName for use in the connection-level statistics record. |
| PHY adnFrStatVCifPhysAddress | 1.3.6.1.4.1.637.3.1.4.10.44.7.1.7 | PhysAddress | not-accessible | This is a duplicate of ifPhysAddress. |
| adnFrStatVCTable | 1.3.6.1.4.1.637.3.1.4.10.44.7 | not-accessible | This table constitutes the FRS (Frame Relay Subscriber) connection-level statistics record. None of the objects in this table can ever be obtained via an SNMP GET command. These objects are only visible in a statistics record. Most of these objects duplicate objects in other tables. They are collected here to allow the statistics record to be sent as a single table to conserve space. | |
| INT adnFrtChanAddrDLCILen | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.2 | INTEGER | read-only | The value of this object identifies the Q.922 address field length and DLCI (data link connection identifier) length for this trunk port. |
| ADN adnFrtChanBAT | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.5 | AdnPercent | read-only | This is the bandwidth allocation threshold for the channel. A value exceeding 80% is not recommended for sustained traffic loads. The values for adnFrtChanMaxBcsUser, adnFrtChanMaxBcsNet, and adnFrtChanMaxBe must be less than or equal to the value of adnFrtChanBAT. Common Name: BAT(%) |
| ADN adnFrtChanDefaultCos | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.35 | AdnFrCos | read-write | The Class of Service that is applied to call with no Class of Service specified. |
| INT adnFrtChanDelayInUse | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.33 | INTEGER | read-write | The sum of the transmission and queueing delays (in milliseconds) currently used as delay cost for this channel. Common Name: Delay Cost In Use |
| INT adnFrtChanDelayMeasured | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.32 | INTEGER | read-only | The sum of the transmission and queueing delays (in milliseconds) measured on this channel. Common Name: Measured Delay Cost |
| INT adnFrtChanDelayReMeasReq | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.34 | INTEGER | read-write | Request for a new delay measurement. When set to inProgress a new delay measurement is initiated and the result is stored in the object adnFrtChanDelayMeasured. |
| adnFrtChanEntry | 1.3.6.1.4.1.637.3.1.5.4.1.1.1 | not-accessible | An entry in the channel table. There will be one entry for each FRANP (Frame Relay Alcatel Network Protocol) channel configured. | |
| ADN adnFrtChanMaxBcsNet | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.10 | AdnPercent | read-only | This field represents the maximum percentage of the channel bandwidth allowed for Bcs (statistically committed data rate) network traffic. It is specified as a percentage of the total bandwidth. It cannot exceed BAT (bandwidth allocation threshold). Therefore, the default value for this field should be no more than the minimum percentage specified for the BAT. Common Name: Max BW for Ntwk Bcs Traffic |
| ADN adnFrtChanMaxBcsUser | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.9 | AdnPercent | read-only | This field represents the maximum percentage of the channel bandwidth allowed for Bcs (statistically committed data rate) users. It is specified as a percentage of the total bandwidth. It cannot exceed BAT (bandwidth allocation threshold). Therefore, the default value for this field should be no more than the minimum percentage specified for the BAT. Common Name: Max BW for User Bcs Traffic |
| ADN adnFrtChanMaxBe | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.11 | AdnPercent | read-only | This field represents the maximum percentage of the channel bandwidth allowed for Be(excess burst data rate). It is specified as a percentage of the total channel bandwidth. It cannot exceed BAT (bandwidth allocation threshold). Therefore, the default value for this field should be no more than the minimum percentage specified for the BAT. Common Name: Max BW for Be Traffic |
| INT adnFrtChanMaxCrf | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.12 | INTEGER | read-only | This is the maximum number of user calls permitted on the trunk. Common Name: Max Num User Calls |
| INT adnFrtChanMaxDlci | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.14 | INTEGER | read-only | This is the maximum user DLCI (data link connection identifier) number permitted on the trunk. Common Name: Max DLCI Number |
| INT adnFrtChanMinDlci | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.13 | INTEGER | read-only | This is the minimum user DLCI (data link connection identifier) number permitted on the trunk. Common Name: Min DLCI Number |
| INT adnFrtChanMonetaryCost | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.31 | INTEGER | read-write | adnFrtChanMonetaryCost identifies the monetary cost of this channel. This is an arbitrary value and is significant only in relation to the monetary cost of other links. The cost is used for route selection. A value of 0 means that this cost is not taken into account for route selection Common name: Monetary Cost |
| INT adnFrtChanNxOverBcsNet | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.7 | INTEGER | read-only | This indicates the number of times Bcs (statistically committed data rate) can be over-subscribed for net- work traffic on the channel. Common Name: # Times Over Subscribe Bcs-Network |
| INT adnFrtChanNxOverBcsUser | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.6 | INTEGER | read-only | This indicates the number of times Bcs (statistically committed data rate) can be over-subscribed for user traffic on the channel. Common Name: # Times Over Subscribe Bcs-User |
| INT adnFrtChanNxOverBe | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.8 | INTEGER | read-only | This indicates the number of times Be (excess burst data rate) can be over-subscribed for the channel. Common Name: # Times Over Subscribe Be |
| ADN adnFrtChanNxOverBeControl | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.30 | AdnEnableDisabled | read-write | This indicates whether the oversubscription factor for Be is enabled or disabled. When disabled, the value for Be is not taken into account when allocating bandwidth for a call. Common Name: Be oversubscription factor control |
| INT adnFrtChanPerDlyIntrv | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.36 | INTEGER | read-write | This field defines the periodic delay sampling interval in seconds. When this interval expires, the line delay will automatically be measured. A zero value will disable periodic delay measurments. |
| NUM adnFrtChanRifIndex | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.4 | InterfaceIndex | read-only | This is the ifIndex of the interface on the remote node on which this VC is carried. This ifIndex has no local significance. |
| ADN adnFrtChanRNodeID | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.3 | AdnRoutingID | read-only | This is the remote routing node ID. |
| ADN adnFrtChanStatistics | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.19 | AdnEnableDisabled | read-write | This indicates if statistics are enabled on this channel. Common Name: Statistics |
| CTR adnFrtChanStatsBcInDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.6 | Counter | read-only | This is the sum of all of Bc (committed data rate) sub-frames that were discarded for ingress TPX IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). Common Name: Bc Discards In |
| CTR adnFrtChanStatsBcOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.9 | Counter | read-only | This indicates the sum of Bc (committed data rate) sub-frames that were discarded for egress traffic (i.e., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. Common Name: Bc Discards Out |
| CTR adnFrtChanStatsBcsInDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.7 | Counter | read-only | This is the sum of all Bcs (statistically committed data rate) sub-frames that were discarded for ingress TPX IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). Common Name: Bcs Discards In |
| CTR adnFrtChanStatsBcsOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.10 | Counter | read-only | This indicates the sum of Bcs (statistically committed data rate) sub-frames that were discarded for egress traffic (i.e., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. Common Name: Bcs Discards Out |
| CTR adnFrtChanStatsBeInDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.8 | Counter | read-only | This is the sum of all Be (excess burst data rate) sub-frames that were discarded for ingress TPX IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). Common Name: Be Discards In |
| CTR adnFrtChanStatsBeOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.11 | Counter | read-only | This indicates the sum of Be (excess burst data rate) sub-frames that were discarded for egress traffic (i.e., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. Common Name: Be Discards Out |
| INT adnFrtChanStatsCommitEgress | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.2 | INTEGER | read-only | This is the sum of committed egress bandwidth. Common Name: Commit Egress |
| INT adnFrtChanStatsCommitIngress | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.3 | INTEGER | read-only | This is the sum of committed ingress bandwidth. Common Name: Commit Ingress |
| ADN adnFrtChanStatsCongsState | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.12 | AdnCongestLevels | read-only | This indicates the congestion level of this channel in the transmit direction. It monitors the line driver transmit queue depth. |
| INT adnFrtChanStatsCosNrtBcEgress | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.15 | INTEGER | read-only | This is the sum of committed egress bandwidth for Class of Service NRT. Common Name: Non-Real Time Data Bc Commit Egress |
| INT adnFrtChanStatsCosNrtBcIngress | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.16 | INTEGER | read-only | This is the sum of committed ingress bandwidth for Class of Service NRT. Common Name: Non-Real Time Data Bc Commit Ingress |
| INT adnFrtChanStatsCosRtBcEgress | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.13 | INTEGER | read-only | This is the sum of committed egress bandwidth for Class of Service RT. Common Name: Real Time Data Bc Commit Egress |
| INT adnFrtChanStatsCosRtBcIngress | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.14 | INTEGER | read-only | This is the sum of committed ingress bandwidth for Class of Service RT. Common Name: Real Time Data Bc Commit Ingress |
| adnFrtChanStatsEntry | 1.3.6.1.4.1.637.3.1.5.4.1.2.1 | not-accessible | An entry in the channel level statistics table. There wll be one entry for each FRANP (Frame Relay Alcatel Network Protocol) channel configured. | |
| INT adnFrtChanStatsOverEgress | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.4 | INTEGER | read-only | This is the sum of overcommitted egress bandwidth. Common Name: Over Egress |
| INT adnFrtChanStatsOverIngress | 1.3.6.1.4.1.637.3.1.5.4.1.2.1.5 | INTEGER | read-only | This is the sum of overcommitted ingress bandwidth. Common Name: Over Ingress |
| adnFrtChanStatsTable | 1.3.6.1.4.1.637.3.1.5.4.1.2 | not-accessible | This table defines all the channel level statistics for FRANP_SW subsystem. | |
| INT adnFrtChanT303 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.20 | INTEGER | read-only | This timer specifies the amount of time to wait for a setup response. If the timer expires, then the setup message is retransmitted. The timer value is expressed in seconds. |
| INT adnFrtChanT305 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.21 | INTEGER | read-only | This timer specifies the amount of time to wait for a disconnect response. If the timer expires, then the release message is transmitted. The timer value is expressed in seconds. |
| INT adnFrtChanT308 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.22 | INTEGER | read-only | This timer specifies the amount of time to wait for a release response. If the timer expires the first time, then the release message is retransmitted. The timer value is expressed in seconds. |
| INT adnFrtChanT309 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.23 | INTEGER | read-only | This data link timer specifies the amount of time to wait for re-establishment of the LAPD (link access procedure on the D-channel) message. If the timer expires, all calls will be cleared. Otherwise, calls in stable states are not lost. The timer value is expressed in seconds. |
| INT adnFrtChanT310 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.24 | INTEGER | read-only | This timer specifies the amount of time to wait for a Call Proceeding response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds. |
| INT adnFrtChanT313 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.25 | INTEGER | read-only | This timer specifies the amount of time to wait for a connect response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds. |
| INT adnFrtChanT315 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.26 | INTEGER | read-only | This timer specifies the amount of time to wait for a status inquiry response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds. |
| INT adnFrtChanT316 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.27 | INTEGER | read-only | This timer specifies the amount of time to wait for a restart response. If the timer expires, then the restart message is re-transmitted. The timer value is expressed in seconds. |
| INT adnFrtChanT317 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.28 | INTEGER | read-only | Not used for Release 2.0. Reserved for future use. This restart confirm timer specifies the amount of time to wait for clearing all the calls. The timer value is expressed in seconds. |
| INT adnFrtChanT320 | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.29 | INTEGER | read-only | Not used for Release 2.0. Reserved for future use. This inactivity timer specifies the amount of time to wait for a response to a call. The timer value is expressed in seconds. |
| adnFrtChanTable | 1.3.6.1.4.1.637.3.1.5.4.1.1 | not-accessible | This table defines all the channels configured for FRANP (Frame Relay Alcatel Network Protocol). There is no existing standard MIB for Alcatel's internal network protocol. This table is owned by FRANP Signalling software module. | |
| INT adnFrtChanTotalNumDlci | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.15 | INTEGER | read-only | This is the current number of user DLCI (data link connection identifier) on the trunk. Common Name: # VC |
| INT adnFrtChanTotalUsrPVCsUp | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.37 | INTEGER | read-only | This is the current number of user PVCs for which the value of adnFrtVCOperState is up. Common Name: # PVC |
| INT adnFrtChanTotalUsrSVCsUp | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.38 | INTEGER | read-only | This is the current number of user SVCs for which the value of adnFrtVCOperState is up. Common Name: # SVC |
| INT adnFrtChanTPXBc2HSSBcsNet | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.18 | INTEGER | read-only | This flag indicates the conversion from TPX network Bc (committed data rate) to HSS user Bcs (statistically committed data rate) if a channel is configured as a TPX Interworking Function (IWF) channel. An IWF is a trunk line connecting a TPX to an HSS. Common Name: Convert TPX Bc to HSS Ntwk Bcs |
| INT adnFrtChanTPXBc2HSSBcsUsr | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.17 | INTEGER | read-only | This flag indicates the conversion from TPX user Bc (committed data rate) to HSS user Bcs (statistically committed data rate) if a channel is configured as a TPX Interworking Function (IWF) channel. An IWF is a trunk line connecting a TPX to an HSS. Common Name: Convert TPX Bc to HSS User Bcs |
| INT adnFrtChanType | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.1 | INTEGER | read-only | The value of this object identifies the type of network interface for this trunk port. Common Name: FR Trunk Type |
| INT adnFrtChanUserNetFlg | 1.3.6.1.4.1.637.3.1.5.4.1.1.1.16 | INTEGER | read-only | This indicates whether the trunk follows the user or network side of the protocol recommendations. Common Name: User/Network Protocol |
| ADN adnFrtCosAdminStatus | 1.3.6.1.4.1.637.3.1.5.4.1.5.1.2 | AdnFrCosAdminStatus | read-write | This object provides a mechanism for controlling the status of this Class of Service. Set to locked(2) it will cause any new calls to this Class of Service be rejected. Set to unlocked(1) it will cause resumption of the normal operation. |
| adnFrtCosEntry | 1.3.6.1.4.1.637.3.1.5.4.1.5.1 | not-accessible | Class of Service table entry for FRANP trunk protocol. | |
| ADN adnFrtCosIndex | 1.3.6.1.4.1.637.3.1.5.4.1.5.1.1 | AdnFrCos | read-only | The Cos (Class Of Service) index for a specific class of service managed by this frame relay interface. |
| ADN adnFrtCosOperStatus | 1.3.6.1.4.1.637.3.1.5.4.1.5.1.3 | AdnFrCosOperStatus | read-only | This object indicates the operational status of this Class of Service. A value of locked(2) indicates that any new calls will be rejected for this Class of Service. A value of unlocked(1) indicates normal operation. |
| adnFrtCosTable | 1.3.6.1.4.1.637.3.1.5.4.1.5 | not-accessible | This is the Class of Service table for FRANP trunk protocol. | |
| NUM adnFrtVCAdjacentifIndex | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.12 | InterfaceIndex | read-only | This is the ifIndex of the interface on the adjacent node on which this VC is carried. This ifIndex has no local significance. |
| ADN adnFrtVCAdjacentNodeID | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.11 | AdnRoutingID | read-only | This is the routing node ID of the adjacent node to which the channel carrying this VC is connected. |
| INT adnFrtVCAdminState | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.3 | INTEGER | read-write | The desired state of the call. Common Names: Administrative, Status Administrative |
| INT adnFrtVCBcBackward | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.14 | INTEGER | read-only | This specifies the committed data rate, in bits per second, in the backward direction. Note that backward data may be ingress or egress depending on the setting of adnFrtVCSetupDir. |
| INT adnFrtVCBcForward | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.13 | INTEGER | read-only | This specifies the committed data rate, in bits per second, in the forward direction. Note that forward data may be ingress or egress depending on the setting of adnFrtVCSetupDir. |
| INT adnFrtVCBcsBackward | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.18 | INTEGER | read-only | This specifies the statistically committed data rate, in bits per second, in the backward direction. Note that backward data may be ingress or egress depending on the setting of adnFrtVCSetupDir. |
| INT adnFrtVCBcsForward | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.17 | INTEGER | read-only | This specifies the statistically committed data rate, in bits per second, in the forward direction. Note that forward data may be ingress or egress depending on the setting of adnFrtVCSetupDir. |
| INT adnFrtVCBeBackward | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.16 | INTEGER | read-only | This specifies the excessive burst data rate, in bits per second, in the backward direction. Note that backward data may be ingress or egress depending on the setting of adnFrtVCSetupDir. |
| INT adnFrtVCBeForward | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.15 | INTEGER | read-only | This specifies the excessive burst data rate, in bits per second, in the forward direction. Note that forward data may be ingress or egress depending on the setting of adnFrtVCSetupDir. |
| INT adnFrtVCCirBackward | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.20 | INTEGER | read-only | This specifies the committed information rate, in bits per second, in the backward direction. Note that backward data may be ingress or egress depending on the setting of adnFrtVCSetupDir. |
| INT adnFrtVCCirForward | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.19 | INTEGER | read-only | This specifies the committed information rate, in bits per second, in the forward direction. Note that forward data may be ingress or egress depending on the setting of adnFrtVCSetupDir. |
| ADN adnFrtVCCos | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.28 | AdnFrCos | read-only | This indicates the Class of Service for the call. |
| INT adnFrtVCDelayCostRem | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.21 | INTEGER | read-only | The delay cost (in milliseconds) allowed between this node and the destination node for setting up this PVC. Common Name: Remaining Delay Cost |
| INT adnFrtVCDLCIIndex | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.1 | INTEGER | not-accessible | The value of this object is equal to the DLCI (data link connection identifier) value for the frame relay trunk. Common Name: Local DLCI |
| adnFrtVCEntry | 1.3.6.1.4.1.637.3.1.5.4.1.3.1 | not-accessible | VC table entry. | |
| ADN adnFrtVCForcedPath | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.5 | AdnEnableDisabled | read-only | This specifies that this VC must take a forced path through the network. |
| INT adnFrtVCHopCostRem | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.23 | INTEGER | read-only | The number of hops allowed between this node and the destination node for setting up this VC. Common Name: Remaining Hop Cost |
| INT adnFrtVCMonetaryCostRem | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.22 | INTEGER | read-only | The monetary cost allowed between this node and the destination node for setting up this VC. Common Name: Remaining Monetary Cost |
| INT adnFrtVCOperState | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.4 | INTEGER | read-only | The current state of the call. Common Names: Operational, Status Operational |
| INT adnFrtVCPathSelectMode | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.25 | INTEGER | read-only | The mode the path selection function must use to select a path for this VC. Best available service uses the lowest cost path(s) which meet the cost requirement as the primary path. With this approach, the first calls set up in the network potentially receive a higher quality service than calls which happen to arrive later. Best fit service uses the highest cost path(s) which meet the cost requirement as the primary path(s). This approach uses the least required resources to satisfy the cost function and conserves the higher quality of service for those calls which may require them. Common Name: Path Selection Mode |
| INT adnFrtVCRemoteDlci | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.8 | INTEGER | read-only | This is the ingress DLCI (data link connection identifier) associated with the VC. Common Name: Remote DLCI |
| INT adnFrtVCRemoteDlciLen | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.9 | INTEGER | read-only | This is the length of the ingress VC's DLCI (data link connection identifier). |
| NUM adnFrtVCRemoteifIndex | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.10 | InterfaceIndex | read-only | This is the ifIndex of the interface on the remote node on which this VC is carried. This ifIndex has no local significance. |
| INT adnFrtVCRoutingMode | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.24 | INTEGER | read-only | The routing mode used for routing this VC. When best effort is used, routing is done without regards to the cost requirement. When best effort is not used, routing must take into account the cost requirement. Common Name: Routing Mode |
| INT adnFrtVCRtsCritID | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.26 | INTEGER | read-only | The index into adnRtsCritSmryTable of the routing criteria applied for this VC. Common Name: Routing Criteria ID |
| INT adnFrtVCSetupDir | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.2 | INTEGER | read-only | The direction of the setup message. It can be either entering the node (ingress) or exiting the node (egress). |
| ADN adnFrtVCState | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.7 | AdnFrtVCStates | read-only | This defines the states that are implemented and supported for the Frame Relay Alcatel Network Protocol signalling interface on the trunk. |
| CTR adnFrtVCStatsBcOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.4 | Counter | read-only | This indicates the number of Bc (committed data rate) sub-frames that were discarded for egress traffic (ie., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. |
| CTR adnFrtVCStatsBcsOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.5 | Counter | read-only | This indicates the number of Bcs (statistically committed data rate) sub-frames that were discarded for egress traffic (ie., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. |
| CTR adnFrtVCStatsBeOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.6 | Counter | read-only | This indicates the number of Be (excess burst data rate) sub-frames that were discarded for egress traffic (i.e., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. |
| adnFrtVCStatsEntry | 1.3.6.1.4.1.637.3.1.5.4.1.4.1 | not-accessible | An entry in the VC statistics table. | |
| ADN adnFrtVCStatsInCongsState | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.13 | AdnCongestLevels | read-only | This indicates the congestion level of this VC in the ingress direction. This state is based on the amount of data in the calendar queue, which is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). Common Name: Congestion Level |
| CTR adnFrtVCStatsIWFBcInDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.7 | Counter | read-only | This indicates the number of Bc (committed data rate) sub-frames that were discarded for ingress TPX/IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). |
| CTR adnFrtVCStatsIWFBcOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.10 | Counter | read-only | This indicates the number of Bc (committed data rate) sub-frames that were discarded for egress TPX/IWF (Interworking Function) traffic due to XON/XOFF (flow control on and flow control off) queue congestion. |
| CTR adnFrtVCStatsIWFBcsInDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.8 | Counter | read-only | This indicates the number of Bcs (statistically committed data rate) sub-frames that were discarded for ingress TPX /IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). |
| CTR adnFrtVCStatsIWFBcsOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.11 | Counter | read-only | This indicates the number of Bcs (statistically committed data rate) sub-frames that were discarded for egress TPX /IWF (Interworking Function) traffic due to XON/XOFF (flow control on and flow control off) queue congestion. |
| CTR adnFrtVCStatsIWFBeInDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.9 | Counter | read-only | This indicates the number of Be (excess burst data rate) sub-frames that were discarded for ingress TPX/IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). |
| CTR adnFrtVCStatsIWFBeOutDiscards | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.12 | Counter | read-only | This indicates the number of Be (excess burst data rate) sub-frames that were discarded for egress TPX/IWF (Interworking Function) traffic due to XON/XOFF (flow control on and flow control off) queue congestion. |
| CTR adnFrtVCStatsSubFrameIN | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.2 | Counter | read-only | The number of ingress sub-frames for this VC. |
| CTR adnFrtVCStatsSubFrameOUT | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.3 | Counter | read-only | The number of egress sub-frames for this VC. |
| adnFrtVCStatsTable | 1.3.6.1.4.1.637.3.1.5.4.1.4 | not-accessible | This is the VC table for the FRANP (Frame Relay Alcatel Network Protocol) trunk protocol. This table is owned by FRANP Switching software module. | |
| ADN adnFrtVCStatsTime | 1.3.6.1.4.1.637.3.1.5.4.1.4.1.1 | AdnNodeTimeStamp | read-only | The time the VC was initialized. |
| adnFrtVCTable | 1.3.6.1.4.1.637.3.1.5.4.1.3 | not-accessible | This is the VC table for FRANP (Frame Relay Alcatel Network Protocol) trunk protocol. This table is owned by FRANP Signalling software module. | |
| INT adnFrtVCTrafficType | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.6 | INTEGER | read-only | This indicates if this is a user or network call. The priority given to each type of call's data in the network differs: user call priority = customer traffic; network call priority = network traffic such as alarms, accounting, and statistics. |
| INT adnFrtVCType | 1.3.6.1.4.1.637.3.1.5.4.1.3.1.27 | INTEGER | read-only | This indicates the type of VC for the call. |
| INT adnFrVCAccounting | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.37 | INTEGER | read-write | This indicates whether accounting is enabled for this VC. If it has the value 'useChannelValue(3)', this VC uses the value specified by adnFrChanAccounting. Common Name: Accounting |
| INT adnFrVCAdminState | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.5 | INTEGER | read-write | The desired state of this call. Common Name: Status Administrative, Administrative |
| INT adnFrVCAttemptState | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.35 | INTEGER | read-only | This contains the current VC call attempt state. This will start out as 'fast(1)' or 'rxcall(3)' depending on adnFrVCSourceDest. If adnFrVCSourceDest has the value 'source(1)', and the call attempt fails adnFrVCRetryAttempt times, then the call will be attempted at the slow rate (adnFrVCSlowRetry) and this object will be set to 'slow(2)'. Common Name: Attempt State |
| CTR adnFrVCBcInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.23 | Counter | read-only | This indicates the number of ingress Bc (committed data rate) frames that were discarded at the interface due to network congestion. Common Name: Bc Frame In Discards |
| CTR adnFrVCBcOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.26 | Counter | read-only | This indicates the number of egress Bc (committed data rate) frames that were discarded at the interface due to network congestion. Common Name: Bc Frame Out Discards |
| CTR adnFrVCBcsInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.22 | Counter | read-only | This indicates the number of ingress Bcs (statistically- committed data rate) frames that were discarded at the interface due to network congestion. Common Name: Bcs Frame In Discards |
| CTR adnFrVCBcsOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.25 | Counter | read-only | This indicates the number of egress Bcs (statistically- committed data rate) frames that were discarded at the interface due to network congestion. Common Name: Bcs Frame Out Discards |
| CTR adnFrVCBeInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.21 | Counter | read-only | This indicates the number of ingress Be (excessive burst data rate) frames that were discarded at the interface due to network congestion. Common Name: Be Frame In Discards |
| CTR adnFrVCBeOutDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.24 | Counter | read-only | This indicates the number of egress Be (excessive burst data rate) frames that were discarded at the interface due to network congestion. Common Name: Be Frame Out Discards |
| INT adnFrVCBwAllocated | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.74 | INTEGER | read-only | This is the bandwidth allocated to this VC. |
| ADN adnFrVCCos | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.53 | AdnFrCos | read-write | This indicates the Class of Service (COS) for the PVC. SVCs and calls received through a TPX Gateway use the COS defined in adnFrChanDefaultCos. |
| T/F adnFrVCDelaySensitive | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.52 | TruthValue | read-only | This field indicates whether the VC is delay sensitive. If either this field or adnFrChanDelaySensitive is set to 'true(1)', then path selection for the VC will be based on the criterion (delay, monetary cost, hops). Otherwise, path selection will be based on the criterion (monetary cost, delay, hops). |
| STR adnFrVCDescr | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.75 | DisplayString | read-only | A textual string describing this VC. Common Name: Description |
| CTR adnFrVCDiscardLisIn | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.28 | Counter | read-only | This indicates the number of ingress frames that were discarded because LIS (local in-channel signalling) declared the PVC inactive. This value will increment only if adnFrVCLisDiscard is set to 'discard(1)'. Common Name: Frames In Discarded (LIS down) |
| NTF adnFrVCDown | 1.3.6.1.4.1.637.3.1.6.2.0.3 | Indicates that the PVC has been set to 'down' by an NMS command. | ||
| INT adnFrVCEndptConnectIdentifier | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.63 | INTEGER | read-only | This is a duplicate of frPVCEndptConnectIdentifier. |
| INT adnFrVCEndptDLCIIndex | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.54 | INTEGER | not-accessible | This is a duplicate of frPVCEndptDLCIIndex. |
| INT adnFrVCEndptInBc | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.56 | INTEGER | read-only | This is a duplicate of frPVCEndptInBc. |
| INT adnFrVCEndptInBe | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.57 | INTEGER | read-only | This is a duplicate of frPVCEndptInBe. |
| INT adnFrVCEndptInCIR | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.58 | INTEGER | read-only | This is a duplicate of frPVCEndptInCIR. |
| CTR adnFrVCEndptInDEFrames | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.68 | Counter | read-only | This is a duplicate of frPVCEndptInDEFrames. |
| CTR adnFrVCEndptInDiscards | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.71 | Counter | read-only | This is a duplicate of frPVCEndptInDiscards. |
| CTR adnFrVCEndptInExcessFrames | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.69 | Counter | read-only | This is a duplicate of frPVCEndptInExcessFrames. |
| CTR adnFrVCEndptInFrames | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.66 | Counter | read-only | This is a duplicate of frPVCEndptInFrames. |
| INT adnFrVCEndptInMaxFrameSize | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.55 | INTEGER | read-only | This is a duplicate of frPVCEndptInMaxFrameSize. |
| CTR adnFrVCEndptInOctets | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.72 | Counter | read-only | This is a duplicate of frPVCEndptInOctets. |
| INT adnFrVCEndptOutBc | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.60 | INTEGER | read-only | This is a duplicate of frPVCEndptOutBc. |
| INT adnFrVCEndptOutBe | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.61 | INTEGER | read-only | This is a duplicate of frPVCEndptOutBe. |
| INT adnFrVCEndptOutCIR | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.62 | INTEGER | read-only | This is a duplicate of frPVCEndptOutCIR. |
| CTR adnFrVCEndptOutExcessFrames | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.70 | Counter | read-only | This is a duplicate of frPVCEndptOutExcessFrames. |
| CTR adnFrVCEndptOutFrames | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.67 | Counter | read-only | This is a duplicate of frPVCEndptOutFrames. |
| INT adnFrVCEndptOutMaxFrameSize | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.59 | INTEGER | read-only | This is a duplicate of frPVCEndptOutMaxFrameSize. |
| CTR adnFrVCEndptOutOctets | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.73 | Counter | read-only | This is a duplicate of frPVCEndptOutOctets. |
| INT adnFrVCEndptRcvdSigStatus | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.65 | INTEGER | read-only | This is a duplicate of frPVCEndptRcvdSigStatus. |
| ROW adnFrVCEndptRowStatus | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.64 | RowStatus | read-only | This is a duplicate of frPVCEndptRowStatus. |
| adnFrVCEntry | 1.3.6.1.4.1.637.3.1.4.10.44.2.1 | not-accessible | VC table entry. | |
| NTF adnFrVCExitSlowPoll | 1.3.6.1.4.1.637.3.1.6.2.0.2 | This trap indicates the return to a normal PVC call setup attempt polling interval, after the call was in the slow poll state. | ||
| INT adnFrVCFastRetry | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.13 | INTEGER | read-write | This timer specifies the amount of time to wait between failed PVC setup attempts. After attempting this rate for adnFrVCRetryAttempts times, the rate will be slowed to adnFrVCSlowRetry. This only has significance if adnFrVCSourceDest is 'source(1)'. Common Name: Fast Rate Retry Timer |
| ADN adnFrVCForcedPath | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.15 | AdnEnableDisabled | read-only | This specifies that this PVC has a forced path specified in the adnFrForceRoute table. If this object is set to 'enabled(1)' and there is no adnFrForceEntry for this PVC, then the PVC will be treated as if adnFrVCForcedPath has the value 'disabled(2)'. Common Name: Forced Path |
| CTR adnFrVCFrameIN | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.17 | Counter | read-only | This counts the number of frames forwarded to the network for this VC. Note that the value of frPVCEndptInFrames from RFC1604 gives the frames received from the user. This counter does not include the 'dummy' frames generated by congestion control. It does include the DQ (data qualified) frames, used to exchange status information with the FRS subsystem at the remote end of a call. Common Name: Frame In |
| CTR adnFrVCFrameOUT | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.18 | Counter | read-only | This counts the number of frames received from the network for this VC. Note that the value of frPVCEndptOutFrames from RFC1604 gives the frames sent to the user. This counter does not include the number of 'dummy' frames generated by congestion control. It does include the DQ (data qualified) frames. Common Name: Frame Out |
| INT adnFrVCInBc | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.48 | INTEGER | read-only | This specifies the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the ingress direction (into the frame relay network). This is a measure of the exclusively allocated trunk bandwidth required for the user's committed data. Common Name: Ingress Trunk Bc |
| INT adnFrVCInBcs | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.8 | INTEGER | read-only | This specifies the Bcs (statistically-committed data rate) for ingress data. Common Name: Ingress Bcs |
| ADN adnFrVCInCongsState | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.27 | AdnCongestLevels | read-only | This indicates the congestion level of this VC in the ingress direction. Depending on the congestion level, some frames from the user may be discarded. Frames are discarded according to a priority scheme. Note that an idle VC may also be classified as congested due to restricted internal resources. Common Name: Ingress Congestion Level |
| INT adnFrVCISR | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.34 | INTEGER | read-only | This is the initial submission rate (ISR) for ingress traffic. When the VC is determined to be idle in the ingress direction, the submission information rate (SIR) is set to the the ISR. Common Name: Initial Submission Rate |
| INT adnFrVCLastClrCauseRX | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.42 | INTEGER | read-only | This is the most recent clearing cause that was received from the network for this VC. |
| INT adnFrVCLastClrCauseTX | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.44 | INTEGER | read-only | This is the most recent clearing cause that was transmitted to the network for this VC. |
| INT adnFrVCLastClrDiagRX | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.43 | INTEGER | read-only | This is the most recent clearing diagnostic code that was received from the network for this VC. |
| INT adnFrVCLastClrDiagTX | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.45 | INTEGER | read-only | This is the most recent clearing diagnostic code that was transmitted to the network for this VC. |
| INT adnFrVCLisDiscard | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.11 | INTEGER | read-only | This object indicates whether FRS should discard ingress data if the LIS (Local In-channel Signalling) status for this PVC is inactive. If this is 'discard(1)' and the local or remote LIS status is down, then ingress data is discarded. If this is 'nodiscard(2)', then regardless of LIS status, the ingress data is not discarded. Common Name: LIS Discard Action |
| INT adnFrVCNumNodes | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.30 | INTEGER | read-only | This indicates the number of nodes in the VC connection If adnFrVCOperState is 'up(1)', then this gives the current hop count. If the adnFrVCOperState is not 'up(1)', this this gives the hop count of the last connection. |
| CTR adnFrVCNumRelinks | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.29 | Counter | read-only | Indicates the number of times the call was successfully connected. Common Name: # of Successful Links |
| INT adnFrVCOperState | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.6 | INTEGER | read-only | The current state of this call. Common Name: Status Operational, Operational |
| INT adnFrVCOutBc | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.49 | INTEGER | read-only | This specifies the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the egress direction (out of the frame relay network). This is a measure of the exclusively allocated trunk bandwidth required for the user's committed data. Common Name: Egress Trunk Bc |
| INT adnFrVCOutBcs | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.9 | INTEGER | read-only | This specifies the Bcs (statistically-committed data rate) for egress data. Common Name: Egress Bcs |
| INT adnFrVCOutDlci | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.33 | INTEGER | read-only | This is the DLCI (data link connection identifier) of the VC on the interface on which it exits this node away from this VC endpoint. This can be combined with adnFrVCOutifIndex and used for call tracing. |
| NUM adnFrVCOutifIndex | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.32 | InterfaceIndex | read-only | This is the ifIndex of the interface on which this VC exits this node away from this VC endpoint. It is usually a trunk interface. |
| INT adnFrVCRemDlci | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.4 | INTEGER | read-only | This is the DLCI (data link connection identifier) of this VC on the interface on the node at the remote end of the VC. Common Name: Remote DLCI |
| INT adnFrVCRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.51 | INTEGER | read-only | The area number part of adnFrVCRemNodeID, the routing node ID of the node at the remote endpoint of this frame relay VC. |
| ADN adnFrVCRemNodeID | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.1 | AdnRoutingID | read-only | This is the routing node ID of the destination node for this VC. It is an integer that ROUTES (HSS routing application) uses to route this call to the proper destination node. Common Name: Remote Node ID |
| INT adnFrVCRemNodeMacNum | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.50 | INTEGER | read-only | The machine number part of adnFrVCRemNodeID, the routing node ID of the node at the remote endpoint of this frame relay VC. |
| INT adnFrVCRemNumPlan | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.2 | INTEGER | read-only | This is the numbering plan of the interface on the node at the remote end of the VC. Common Name: Remote Numbering Plan |
| INT adnFrVCRemoteifindex | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.46 | INTEGER | read-only | This is the ifIndex of the interface on the node at the remote end of the VC. Together the objects adnFrVCRemNodeID, ifIndex, adnFrVCRemoteifindex, frPVCEndptDLCIIndex, adnFrVCRemDlci, and adnFrVCUniqueConnID uniquely identify VCs for accounting and statistics purposes. |
| PHY adnFrVCRemPhysAddress | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.3 | PhysAddress | read-only | This is the address of the interface on the node at the remote end of the VC. The numbering plan for that interface is given by the value of adnFrVCRemNumPlan. Common Name: Remote address |
| INT adnFrVCRetryAttempts | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.12 | INTEGER | read-only | This specifies the number of PVC call attempts to make at the fast rate (adnFrVCFastRetry) before slowing the call attempt rate to adnFrVCSlowRetry. This only has significance if adnFrVCSourceDest is 'source(1)'. The current attempt state is in adnFrVCAttemptState. Common Name: Fast Rate Retry |
| NTF adnFrVCSlowPoll | 1.3.6.1.4.1.637.3.1.6.2.0.1 | This trap is sent every time a PVC enters the slow poll state. | ||
| INT adnFrVCSlowRetry | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.14 | INTEGER | read-write | This timer specifies the amount of time to wait between failed PVC setup attempts. After attempting the adnFrVCFastRetry rate for adnFrVCRetryAttempts times, the rate will be slowed to adnFrVCSlowRetry. This only has significance if adnFrVCSourceDest is 'source(1)'. Common Name: Slow Rate Retry Timer |
| INT adnFrVCSourceDest | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.16 | INTEGER | read-only | This object indicates the call direction of this PVC. If it has the value 'source(1)', the FRS (frame relay Subscriber) subsystem will initiate the call. If it has the value 'destination(2)', FRS will wait for an incoming call request. Common Names: Source or Destination, Src/Dest |
| INT adnFrVCStatistics | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.36 | INTEGER | read-write | This indicates whether statistics are enabled for this VC. If set to 'useChannelValue(3)', this VC uses the value specified by adnFrChanStatistics. Common Name: Statistics |
| CTR adnFrVCSubFrameIN | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.19 | Counter | read-only | This counts the number of sub-frames forwarded to the network for this VC. Note that the value of frAccountPVCInSegments from RFC1604 gives the number of sub-frames received from the user. Common Name: Sub Frame In |
| CTR adnFrVCSubFrameOUT | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.20 | Counter | read-only | This counts the number of sub-frames received from the network for this VC. Note that the value of frAccountPVCOutSegments from RFC1604 gives the number of sub-frames sent to the user. Common Name: Sub Frames Out |
| adnFrVCTable | 1.3.6.1.4.1.637.3.1.4.10.44.2 | not-accessible | These are the PVC table extensions to the PVC End-Point table in RFC1604. This table is used for PVCs and SVCs. | |
| ADN adnFrVCTime | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.7 | AdnNodeTimeStamp | read-only | The time the VC was initialized. For a PVC, this is the time the PVC was configured. Common Name: Last Change |
| INT adnFrVCType | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.31 | INTEGER | read-only | This specifies the type of this connection: other, pvc ( permanent virtual connection ), svc ( switched virtual connection ) or mspvc ( multi-source permanent virtual connection ). Common Name: Type |
| INT adnFrVCUniqueConnID | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.40 | INTEGER | read-only | This is a unique connection identifier for this VC. This value is exchanged with the remote FRS (Frame Relay Subscriber) at call setup time. Both the local and the remote ends of the VC will report this value in the accounting record. |
| NTF adnFrVCUp | 1.3.6.1.4.1.637.3.1.6.2.0.4 | Indicates that the switch will attempt to make calls or accept calls for a particular PVC. The NMS has allowed the PVC to be put into service. | ||
| INT adnFrVCUserOrNet | 1.3.6.1.4.1.637.3.1.4.10.44.2.1.10 | INTEGER | read-only | This indicates if this is a User or Network call. The priority given to each type of call's data in the network differs. Common Name: Type of Call |
| adnFtd | 1.3.6.1.4.1.637.3.1.2.2.9.4 | |||
| adnHb2e1 | 1.3.6.1.4.1.637.3.1.2.2.2.3 | |||
| adnHb2et | 1.3.6.1.4.1.637.3.1.2.2.8.1.1 | |||
| adnHb2t1 | 1.3.6.1.4.1.637.3.1.2.2.2.2 | |||
| adnHb2tr | 1.3.6.1.4.1.637.3.1.2.2.8.1.2 | |||
| adnHb8ce | 1.3.6.1.4.1.637.3.1.2.2.2.4 | |||
| adnHb8ct | 1.3.6.1.4.1.637.3.1.2.2.2.5 | |||
| adnHb8cu | 1.3.6.1.4.1.637.3.1.2.2.2.6 | |||
| adnHb8e1 | 1.3.6.1.4.1.637.3.1.2.2.2.8 | |||
| adnHb8t1 | 1.3.6.1.4.1.637.3.1.2.2.2.7 | |||
| adnHbcee | 1.3.6.1.4.1.637.3.1.2.2.3.9 | |||
| adnHbcet | 1.3.6.1.4.1.637.3.1.2.2.3.8 | |||
| adnHbceu | 1.3.6.1.4.1.637.3.1.2.2.3.10 | |||
| adnHbcig1 | 1.3.6.1.4.1.637.3.1.2.2.4.1 | |||
| adnHbcig3 | 1.3.6.1.4.1.637.3.1.2.2.4.3 | |||
| adnHbcig4 | 1.3.6.1.4.1.637.3.1.2.2.4.4 | |||
| adnHbcigr | 1.3.6.1.4.1.637.3.1.2.2.4.2 | |||
| adnHbcp8 | 1.3.6.1.4.1.637.3.1.2.2.2.1 | |||
| adnHbsac | 1.3.6.1.4.1.637.3.1.2.2.7 | |||
| adnHbvss16 | 1.3.6.1.4.1.637.3.1.2.2.8.2.2 | |||
| adnHbvss8 | 1.3.6.1.4.1.637.3.1.2.2.8.2.1 | |||
| adnHsc | 1.3.6.1.4.1.637.3.1.2.2.3 | |||
| adnHscBoardTrMgtEntry | 1.3.6.1.4.1.637.3.1.5.15.25.1 | not-accessible | An entry in the ATM Traffic Management parameters table. | |
| CTR adnHscBoardTrMgtHOBCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.18 | Counter | read-only | The counter associated with the duration of overflows on high priority output buffer; this counter is not relevant for HSC boards without a high priority output buffer. expressed in milliseconds; counter #26 of the ATM core. |
| INT adnHscBoardTrMgtHOBEFCIOffTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.11 | INTEGER | read-only | This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in high priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; due to BGTOB chip constraint, the value of the threshold is adnHscBoardTrMgtHOBSize (cells); this is only relevant for HSC board with a high priority output buffer. |
| INT adnHscBoardTrMgtHOBEFCIOnTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.8 | INTEGER | read-only | This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in high priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; due to BGTOB chip constraint, the value of the threshold is adnHscBoardTrMgtHOBSize (cells); this is only relevant for HSC board with a high priority output buffer. |
| CTR adnHscBoardTrMgtHOBObsCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.27 | Counter | read-only | The counter associated with the number of observation threshold overpassings on high priority output buffer; this counter is not relevant for HSC boards without a high priority output buffer, for the BBE1B, the BBT1B boards, the BBTP3C boards and for the BBTS1C boards. |
| INT adnHscBoardTrMgtHOBObsTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.14 | INTEGER | read-write | This indicates the observation threshold in high priority output buffer; when the observation threshold is overpassed, the adnHscBoardTrMgtHOBObsCounter value increases; the value range of the threshold is 0..(adnHscBoardTrMgtHOBSize - 1)(cells); this is not relevant for BBT1B and BBE1B boards. |
| INT adnHscBoardTrMgtHOBSCDTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.5 | INTEGER | read-only | This indicates the Selective Cell Discard (SCD) threshold in high priority output buffer (OB); when the filling of the high priority OB reaches the threshold, any incoming cell which internal cell loss priority equal to 1 will be discarded; due to BGTOB chip constraint, the value of the threshold is the high priority OB size. (adnHscBoardTrMgtHOBSize). |
| INT adnHscBoardTrMgtHOBSize | 1.3.6.1.4.1.637.3.1.5.15.25.1.2 | INTEGER | read-only | This indicates the size of high priority output buffer; the allowed values are : - 115(cells) for BBT1B and BBE1B boards - 1..256(cells) for other HSC boards with output buffers. |
| CTR adnHscBoardTrMgtLOBCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.20 | Counter | read-only | The counter associated with the duration of overflows on low priority output buffer; this counter is not relevant for HSC boards without a low priority output buffer; expressed in milliseconds; counter #19 of the ATM core. |
| CTR adnHscBoardTrMgtLOBEFCICounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.24 | Counter | read-only | The counter associated with the number of Explicit Forward Congestion Indication (EFCI) activations on low priority output buffer; counter #3 of the ATM core; this counter is not relevant for HSC boards without a low priority output buffer and for BBE1B and BBT1B boards. |
| INT adnHscBoardTrMgtLOBEFCIOffTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.13 | INTEGER | read-only | This indicates the Explicit Forward Congestion Indication (EFCI) desactivation threshold in low priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the EFCI desactivation threshold is equal to the activation threshold minus 1/10 of the activation threshold; the value range of the threshold is 0..adnHscBoardTrMgtLOBSize; this is only relevant for HSC board with a low priority output buffer. |
| INT adnHscBoardTrMgtLOBEFCIOnTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.10 | INTEGER | read-write | This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in low priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the EFCI desactivation threshold is equal to the activation threshold minus 1/10 of the activation threshold; the value range of the threshold is 0..adnHscBoardTrMgtLOBSize; this is only relevant for HSC board with a low priority output buffer. |
| CTR adnHscBoardTrMgtLOBObsCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.29 | Counter | read-only | The counter associated with the number of observation threshold overpassings on low priority output buffer; this counter is not relevant for HSC boards without a low priority output buffer, the BBE1B, the BBT1B boards, the BBTP3C boards and for the BBTS1C boards. |
| INT adnHscBoardTrMgtLOBObsTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.16 | INTEGER | read-write | This indicates the observation threshold in low priority output buffer; when the observation threshold is overpassed, the adnHscBoardTrMgtLOBObsCounter value increases; the value range of the threshold is 0..(adnHscBoardTrMgtLOBSize - 1) (cells); this is not relevant for BBT1B and BBE1B boards. |
| CTR adnHscBoardTrMgtLOBSCDCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.22 | Counter | read-only | The counter associated with the number of Selective Cell Discard (SCD) activations on low priority output buffer; this counter is not relevant for HSC boards without a low priority output buffer. |
| INT adnHscBoardTrMgtLOBSCDTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.7 | INTEGER | read-only | This indicates the Selective Cell Discard (SCD) threshold in low priority output buffer (OB). when the filling of the low priority OB reaches the threshold, any incoming cell which internal cell loss priority is equal to 1 will be discarded; the value range of the threshold is 0..adnHscBoardTrMgtLOBSize(cells); For BBE1B and BBT1B boards : the value is multiple of 256. |
| INT adnHscBoardTrMgtLOBSize | 1.3.6.1.4.1.637.3.1.5.15.25.1.4 | INTEGER | read-only | This indicates the size of low priority output buffer; For BBE1B and BBT1B boards : the allowed value is 2537(cells). For BBTS1C boards : adnHscBoardTrMgtLOBSize = 7256 - adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize. For BBTP3C boards : adnHscBoardTrMgtLOBSize = 3628 - adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize. For the other HSC boards with output buffers : adnHscBoardTrMgtLOBSize = 16384 - adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize. |
| CTR adnHscBoardTrMgtLOBTPDCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.26 | Counter | read-only | The counter associated with the number of Tail Packet Discard (TPD) activations on low priority outpur buffer; counter #5 of the ATM core; this counter is not relevant for HSC boards without a low priority output buffer, for the BBE1B boards, the BBT1B boards, the BBTP3C boards and for the BBTS1C boards. |
| CTR adnHscBoardTrMgtMOBCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.19 | Counter | read-only | The counter associated with the duration of overflows on medium priority output buffer; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B); expressed in milliseconds; counter #25 of the ATM core. |
| CTR adnHscBoardTrMgtMOBEFCICounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.23 | Counter | read-only | The counter associated with the number of Explicit Forward Congestion Indication (EFCI) activations on medium priority output buffer; counter #2 of the ATM core; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B). |
| INT adnHscBoardTrMgtMOBEFCIOffTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.12 | INTEGER | read-only | This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in medium priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the EFCI desactivation threshold is equal to the activation threshold minus 1/10 of the activation threshold; the value range of the threshold is 0..adnHscBoardTrMgtMOBSize; this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B). |
| INT adnHscBoardTrMgtMOBEFCIOnTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.9 | INTEGER | read-write | This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in medium priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the EFCI desactivation threshold is equal to the activation threshold minus 1/10 of the activation threshold; the value range of the threshold is 0..adnHscBoardTrMgtMOBSize; this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B).. |
| CTR adnHscBoardTrMgtMOBObsCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.28 | Counter | read-only | The counter associated with the number of observation threshold overpassings on medium priority output buffer; this counter is not relevant for HSC boards board without a medium priority output buffer (e.g. BBT1B and BBE1B) and the BBTP3C boards and for the BBTS1C boards. |
| INT adnHscBoardTrMgtMOBObsTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.15 | INTEGER | read-write | This indicates the observation threshold in medium priority output buffer; when the observation threshold is overpassed, the adnHscBoardTrMgtMOBObsCounter value increases; the value range of the threshold is 0..(adnHscBoardTrMgtMOBSize - 1) (cells); this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B).. |
| CTR adnHscBoardTrMgtMOBSCDCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.21 | Counter | read-only | The counter associated with the number of Selective Cell Discard(SCD) activations on medium priority output buffer; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B). |
| INT adnHscBoardTrMgtMOBSCDTh | 1.3.6.1.4.1.637.3.1.5.15.25.1.6 | INTEGER | read-only | This indicates the Selective Cell Discard (SCD) threshold in medium priority output buffer (OB); when the filling of the medium priority OB reaches the threshold, any incoming cell which internal cell loss priority equal to 1 will be discarded; the value range of the threshold is 0..adnHscBoardTrMgtMOBSize(cells); this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B). |
| INT adnHscBoardTrMgtMOBSize | 1.3.6.1.4.1.637.3.1.5.15.25.1.3 | INTEGER | read-only | This indicates the size of medium priority output buffer; For BBTS1C boards : the value range of the size is 0..7255 (cells); For BBTP3C boards : the value range of the size is 0..3627 (cells); For the other HSC boards with output buffers : the value range of the size is 0..16383(cells); this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B). |
| CTR adnHscBoardTrMgtMOBTPDCounter | 1.3.6.1.4.1.637.3.1.5.15.25.1.25 | Counter | read-only | The counter associated with the number of Tail Packet Discard (TPD) activations on medium priority output buffer; counter #4 of the ATM core; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B), the BBTP3C boards and for the BBTS1C boards. |
| INT adnHscBoardTrMgtOBLineAssig | 1.3.6.1.4.1.637.3.1.5.15.25.1.1 | INTEGER | read-only | This indicates the line number the output buffer is assigned to. |
| INT adnHscBoardTrMgtOBStatus | 1.3.6.1.4.1.637.3.1.5.15.25.1.17 | INTEGER | read-only | This variable indicates the output buffers overflows status. It is a bit map represented as a sum. The bit positions are : 1 : high priority output buffer overflow 2 : medium priority output buffer overflow 4 : low priority output buffer overflow N.B.1:When there is no overflow within an output buffer, the corresponding bit has the value '0'. N.B.2:For BBE1B and BBT1B boards, bit position 2 is not significant. |
| adnHscBoardTrMgtTable | 1.3.6.1.4.1.637.3.1.5.15.25 | not-accessible | This table is the HSC Board Traffic Management parameters table. This is only relevant for HSC boards with output buffers | |
| adnHSS | 1.3.6.1.4.1.637.3.1.2.1.5 | |||
| adnHSS1X | 1.3.6.1.4.1.637.3.1.2.1.6 | |||
| adnHSS400 | 1.3.6.1.4.1.637.3.1.2.1.5.1 | |||
| adnHSS700 | 1.3.6.1.4.1.637.3.1.2.1.5.2 | |||
| adnHssAgent | 1.3.6.1.4.1.637.3.1.1.2 | |||
| NTF adnHSSBoardSwitchback | 1.3.6.1.4.1.637.3.1.6.1.0.19 | This trap indicates that a board switchback occurred. | ||
| NTF adnHSSBoardSwitchover | 1.3.6.1.4.1.637.3.1.6.1.0.18 | This trap indicates that a board switchover occurred. | ||
| adnHSSChassis | 1.3.6.1.4.1.637.3.1.2.5.5 | |||
| NTF adnHssCuDownTrap | 1.3.6.1.4.1.637.3.1.6.1.0.10 | This trap is sent every time the node supervision sends a CU down message to ISOM. | ||
| NTF adnHSSEquipStatusChange | 1.3.6.1.4.1.637.3.1.6.1.0.2 | This trap indicates that the indicated equipment has changed state. The trap is sent only if adnEquipTrapEnableMask has the bit set for the state or status that changed. | ||
| NTF adnHssStr | 1.3.6.1.4.1.637.3.1.6.1.0.13 | This trap indicates that a Software Trouble Report occurred inside the HSS | ||
| INT adnHssStrBoardType | 1.3.6.1.4.1.637.3.1.6.5.54 | INTEGER | not-accessible | Board type of the board where the STR appears. (Used only by HSS development teams. The values are described in gif_hss_equip.h .) |
| INT adnHssStrChassis | 1.3.6.1.4.1.637.3.1.6.5.55 | INTEGER | not-accessible | Chassis identifier in the node where the STR appears. |
| INT adnHssStrDay | 1.3.6.1.4.1.637.3.1.6.5.48 | INTEGER | not-accessible | The day of the STR appearance. |
| INT adnHssStrErrorCode | 1.3.6.1.4.1.637.3.1.6.5.64 | INTEGER | not-accessible | Error code. |
| STR adnHssStrFile | 1.3.6.1.4.1.637.3.1.6.5.60 | DisplayString | not-accessible | The source file name. |
| OCT adnHssStrHeader | 1.3.6.1.4.1.637.3.1.6.5.12 | OCTET STRING | not-accessible | Header information in the STR which includes: STR indentifier (adnHssStrName) date and time urgency level sender identifier (node, board type, chassis, slot, processor) software package information |
| INT adnHssStrHour | 1.3.6.1.4.1.637.3.1.6.5.49 | INTEGER | not-accessible | The hour of the STR appearance. |
| INT adnHssStrLevel | 1.3.6.1.4.1.637.3.1.6.5.52 | INTEGER | not-accessible | The STR level : 1 : fatal for nobody 2 : fatal for the sending application 3 : fatal for the local processor 4 : fatal for the local board 5 : fatal for the node. |
| INT adnHssStrLine | 1.3.6.1.4.1.637.3.1.6.5.61 | INTEGER | not-accessible | Line number in the source file. |
| INT adnHssStrMinute | 1.3.6.1.4.1.637.3.1.6.5.50 | INTEGER | not-accessible | The minute of the STR appearance. |
| INT adnHssStrMonth | 1.3.6.1.4.1.637.3.1.6.5.47 | INTEGER | not-accessible | The month of the STR appearance. |
| OCT adnHssStrMoreInfo | 1.3.6.1.4.1.637.3.1.6.5.13 | OCTET STRING | not-accessible | Additional information eventually contained in the STR. This field may be empty. |
| STR adnHssStrName | 1.3.6.1.4.1.637.3.1.6.5.11 | DisplayString | not-accessible | The STR identifier within the HSS. This is a number unique to a specific STR event type. |
| INT adnHssStrNode | 1.3.6.1.4.1.637.3.1.6.5.53 | INTEGER | not-accessible | Identify the node where the STR appears. |
| STR adnHssStrObject | 1.3.6.1.4.1.637.3.1.6.5.63 | DisplayString | not-accessible | The action or object that triggers the STR |
| INT adnHssStrPc | 1.3.6.1.4.1.637.3.1.6.5.62 | INTEGER | not-accessible | Program counter. |
| INT adnHssStrProcessor | 1.3.6.1.4.1.637.3.1.6.5.57 | INTEGER | not-accessible | Processor number on the board where the STR appears. |
| INT adnHssStrSecond | 1.3.6.1.4.1.637.3.1.6.5.51 | INTEGER | not-accessible | The second of the STR appearance. |
| INT adnHssStrSlot | 1.3.6.1.4.1.637.3.1.6.5.56 | INTEGER | not-accessible | Slot identifier in the chassis where the STR appears. |
| INT adnHssStrStadd | 1.3.6.1.4.1.637.3.1.6.5.59 | INTEGER | not-accessible | Address of the software package. |
| STR adnHssStrSwpid | 1.3.6.1.4.1.637.3.1.6.5.58 | DisplayString | not-accessible | The software package identifier. |
| INT adnHssStrYear | 1.3.6.1.4.1.637.3.1.6.5.46 | INTEGER | not-accessible | The year of the STR appearance. |
| INT adnIfAssignmentChassis | 1.3.6.1.4.1.637.3.1.5.15.15.1.1 | INTEGER | read-only | The chassis number where the control application of the ifIndex runs. |
| INT adnIfAssignmentCtrlAppli | 1.3.6.1.4.1.637.3.1.5.15.15.1.4 | INTEGER | read-only | The control application identifier of the ifIndex. |
| adnIfAssignmentEntry | 1.3.6.1.4.1.637.3.1.5.15.15.1 | not-accessible | An entry in the ifIndex assignment table. | |
| INT adnIfAssignmentLine | 1.3.6.1.4.1.637.3.1.5.15.15.1.3 | INTEGER | read-only | The line number attached to the control application of the ifIndex. |
| NUM adnIfAssignmentLowIndex | 1.3.6.1.4.1.637.3.1.5.15.15.1.5 | InterfaceIndex | read-only | The ifIndex of the subordinate layer of this ifIndex. |
| INT adnIfAssignmentSlot | 1.3.6.1.4.1.637.3.1.5.15.15.1.2 | INTEGER | read-only | The slot number where where the control application of the ifIndex runs. |
| adnIfAssignmentTable | 1.3.6.1.4.1.637.3.1.5.15.15 | not-accessible | This table maps an ifIndex to its location. | |
| INT adnIfAssignmentTSI | 1.3.6.1.4.1.637.3.1.5.15.15.1.6 | INTEGER | read-only | This indicates whether or not the ifIndex layer is at the top of a protocol stack. |
| adnIfAssocEntry | 1.3.6.1.4.1.637.3.1.5.19.1 | not-accessible | An association entry containing ifIndex of the first interface, adnNodeIndex of the first node, ifIndex of the associated interface, adnNodeIndex of the associated node and the type of protocol used on these interfaces. | |
| adnIfAssocTable | 1.3.6.1.4.1.637.3.1.5.19 | not-accessible | A list of point to point associations between the PSX/ACX internal link interfaces. | |
| INT adnIfControlStatus | 1.3.6.1.4.1.637.3.1.4.2.2.1.2 | INTEGER | read-write | This object provides a mechanism for controlling the status of the interface. Its value is a bitmap of controls that determine the value of ifAdminStatus. A value of 0 indicates that none of the status controls are in effect. 1 - reset 2 - reserve for test 4 - shutting down |
| adnIfEntry | 1.3.6.1.4.1.637.3.1.4.2.2.1 | not-accessible | An interface entry containing objects at the subnetwork layer and below for a particular interface. | |
| INT adnIfInstallStatus | 1.3.6.1.4.1.637.3.1.4.2.2.1.1 | INTEGER | read-only | The value of this object provides additional information concerning the availability status of the interface. It is a bitmap of installation status conditions. When the value of this object is 0, none of the status conditions are present. 1 - initialization incomplete 2 - last restart operator initiated 4 - reserved for test |
| adnIfMIB | 1.3.6.1.4.1.637.3.1.4.31 | |||
| adnIfMIBObjects | 1.3.6.1.4.1.637.3.1.4.31.1 | |||
| INT adnIfSubType | 1.3.6.1.4.1.637.3.1.4.2.2.1.3 | INTEGER | read-only | This object provides additional type information for interfaces with an ifType of 'other' or 'proprietary virtual'. 1 - No qualification 2 - other, FRANP (Frame Relay Alcatel Network Protocol) 3 - other, ISS (Internal Subscriber Service) 100 - proprietary virtual, FLIP (Fake Line Interface Process) 101 - proprietary virtual, ATM internal line 102 - proprietary virtual, ATM logical line (internode virtual path) 103 - proprietary virtual, frame relay logical line (interworking virtual channel connection) 104 - proprietary virtual, IP over frame relay logical line (interworking FR virtual connection) 105 - proprietary virtual, IP over ATM logical line (interworking virtual channel connection) |
| adnIfTable | 1.3.6.1.4.1.637.3.1.4.2.2 | not-accessible | A list of interface entries. The number of entries is given by the value of ifNumber. | |
| CTR adnIfTestBitsErroredHi | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.7 | Counter | read-only | The most significant 32 bits of the 64-bit internal counter of the number of test bits received that did not match the bits that were sent (i.e., number of bits in error). See also adnIfTestBitsErroredLo. Common name: Test Bits Errored High # |
| CTR adnIfTestBitsErroredLo | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.8 | Counter | read-only | The least significant 32 bits of the 64-bit internal counter of the number of test bits received that did not match the bits that were sent (i.e., number of bits in error). See also adnIfTestBitsErroredHi. Common name: Test Bits Errored Low # |
| CTR adnIfTestBitsReceivedHi | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.5 | Counter | read-only | The most significant 32 bits of the 64-bit internal counter of the number of test bits received. See also adnIfTestBitsReceivedLo. Common name: Test Bits Received High # |
| CTR adnIfTestBitsReceivedLo | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.6 | Counter | read-only | The least significant 32 bits of the 64-bit internal counter of the number of test bits received. See also adnIfTestBitsReceivedHi. Common name: Test Bits Received Low # |
| CTR adnIfTestBitsSentHi | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.3 | Counter | read-only | The most significant 32 bits of the 64-bit internal counter of the number of test bits sent. See also adnIfTestBitsSentLo. Common name: Test Bits Sent High # |
| CTR adnIfTestBitsSentLo | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.4 | Counter | read-only | The least significant 32 bits of the 64-bit internal counter of the number of test bits sent. See also adnIfTestBitsSentHi. Common name: Test Bits Sent Low # |
| adnIfTestEntry | 1.3.6.1.4.1.637.3.1.4.31.1.3.1 | not-accessible | Loop test control and results values for an interface. | |
| INT adnIfTestFailLevel | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.2 | INTEGER | read-write | Threshold for the allowable bit error rate, expressed as one in ten-to-the-power-X, where X is the value of this parameter. For example, the default value of six means that a bit error rate of more than 1 in 1,000,000 is considered failure. This parameter is only used when the HSS sets ifTestResult to success or failed at the end of a test. Common name: Fail Level |
| TIM adnIfTestStartTime | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.9 | TimeStamp | read-only | The value of sysUpTime, in hundredths of a second, when the test started. Common name: Start Time |
| TIM adnIfTestStopTime | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.10 | TimeStamp | read-only | The value of sysUpTime, in hundredths of a second, when the test stopped, or the current time if a test is in progress. Common name: Stop Time |
| adnIfTestTable | 1.3.6.1.4.1.637.3.1.4.31.1.3 | not-accessible | The ADN Interface Test Table. | |
| INT adnIfTestTimeLimit | 1.3.6.1.4.1.637.3.1.4.31.1.3.1.1 | INTEGER | read-write | The time, in hundredths of a second, that the test will run before automatically being terminated. Common name: Time Limit |
| adnIfTestType | 1.3.6.1.4.1.637.3.1.4.31.3 | |||
| adnIfTestTypeApplique | 1.3.6.1.4.1.637.3.1.4.31.3.7 | |||
| adnIfTestTypeData | 1.3.6.1.4.1.637.3.1.4.31.3.3 | |||
| adnIfTestTypeIntCoupler | 1.3.6.1.4.1.637.3.1.4.31.3.10 | |||
| adnIfTestTypeLineHW | 1.3.6.1.4.1.637.3.1.4.31.3.13 | |||
| adnIfTestTypeLineLoop | 1.3.6.1.4.1.637.3.1.4.31.3.11 | |||
| adnIfTestTypeLocalV54 | 1.3.6.1.4.1.637.3.1.4.31.3.6 | |||
| adnIfTestTypeManualV54 | 1.3.6.1.4.1.637.3.1.4.31.3.4 | |||
| adnIfTestTypeNone | 1.3.6.1.4.1.637.3.1.4.31.3.2 | |||
| adnIfTestTypeOther | 1.3.6.1.4.1.637.3.1.4.31.3.1 | |||
| adnIfTestTypePayloadLoop | 1.3.6.1.4.1.637.3.1.4.31.3.12 | |||
| adnIfTestTypePriApplBus | 1.3.6.1.4.1.637.3.1.4.31.3.8 | |||
| adnIfTestTypeRedApplBus | 1.3.6.1.4.1.637.3.1.4.31.3.9 | |||
| adnIfTestTypeRemoteV54 | 1.3.6.1.4.1.637.3.1.4.31.3.5 | |||
| adnImc | 1.3.6.1.4.1.637.3.1.2.2.9.17 | |||
| adnInterface | 1.3.6.1.4.1.637.3.1.2.3 | |||
| adnInterfaces | 1.3.6.1.4.1.637.3.1.4.2 | |||
| adnIosPort | 1.3.6.1.4.1.637.3.1.2.7 | |||
| adnIpAddrAssignmentEntry | 1.3.6.1.4.1.637.3.1.5.15.16.1 | not-accessible | An entry in the ipIndex assignment table. | |
| INT adnIpAddrAssignmentIfindex | 1.3.6.1.4.1.637.3.1.5.15.16.1.2 | INTEGER | read-only | This value is the associate ifindex to an ipIndex |
| adnIpAddrAssignmentTable | 1.3.6.1.4.1.637.3.1.5.15.16 | not-accessible | This table maps an ipIndex to its associate ifIndex | |
| IP adnIpAddress | 1.3.6.1.4.1.637.3.1.5.15.16.1.1 | IpAddress | not-accessible | This value is the ipIndex |
| adnIpfwdsMIB | 1.3.6.1.4.1.637.3.1.5.24 | |||
| adnIpIfStackEntry | 1.3.6.1.4.1.637.3.1.5.24.1.1 | not-accessible | Information on a particular relationship between IP interface and its corresponding AAL5 connections. Each of the multiplexed ifIndex has a conceptual row in the ifTable. | |
| INT adnIpIfStackHigherLayer | 1.3.6.1.4.1.637.3.1.5.24.1.1.1 | INTEGER | not-accessible | The value of ifIndex corresponding to the IP interface which runs on 'top of' an AAL5 connection identified by a corresponding instance of adnIpIfStackLowerLayer. |
| INT adnIpIfStackLowerLayer | 1.3.6.1.4.1.637.3.1.5.24.1.1.2 | INTEGER | not-accessible | The value of ifIndex corresponding to an AAL5 connection which runs 'below' the IP interface identified by the correponding instance of adnIpIfStackHigherLayer. |
| ROW adnIpIfStackStatus | 1.3.6.1.4.1.637.3.1.5.24.1.1.3 | RowStatus | read-write | The status of the relationship between two sub- layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down a connection. |
| adnIpIfStackTable | 1.3.6.1.4.1.637.3.1.5.24.1 | not-accessible | The table containing information on the relationship between an IP interface and its correponding AAL5 connections (or indices). Each of these multiplexed entities correspond to a conceptual row in the ifTable. | |
| INT adnIpRouteConfigAdminState | 1.3.6.1.4.1.637.3.1.5.23.1.1.3 | INTEGER | read-write | This object indicates the desired state of the IP Routing (GateD) component. There are typically only two selection states, Enabled(1) or Disabled(2). |
| STR adnIpRouteConfigFilePtr | 1.3.6.1.4.1.637.3.1.5.23.1.1.2 | DisplayString | read-only | This object defines the pointer to an ASCII string that points to the IP routing Configuration path/file on the HSS CU disk. |
| INT adnIpRouteConfigIndex | 1.3.6.1.4.1.637.3.1.5.23.1.1.1 | INTEGER | read-only | This object defines the Index into this table. This index will represent only one instance of any object in this table. |
| INT adnIpRouteConfigOperState | 1.3.6.1.4.1.637.3.1.5.23.1.1.4 | INTEGER | read-write | This object indicates the current state of the IP Routing (GateD) component. There are typically only two states possible, Up(1) or Down(2). |
| adnIpRouteNodeEntry | 1.3.6.1.4.1.637.3.1.5.23.1.1 | not-accessible | The IP Route Node Entry defines IP Routing Node Table Entries. | |
| adnIpRouteNodeTable | 1.3.6.1.4.1.637.3.1.5.23.1 | not-accessible | This is the IP Routing Configuration Table | |
| adnIprtMIB | 1.3.6.1.4.1.637.3.1.5.23 | |||
| INT adnIsnaIcAdminState | 1.3.6.1.4.1.637.3.1.5.6.1.1.6 | INTEGER | read-write | This object contains the desired state of the internal subscriber subsystem internal connection. |
| INT adnIsnaIcBckDlci | 1.3.6.1.4.1.637.3.1.5.6.1.1.5 | INTEGER | read-only | This object represents the backup internal connection data link connection identifier for a given internal connection defined between internal subscriber node administrator and internal subscriber operation maintenance. |
| INT adnIsnaIcBckIfindex | 1.3.6.1.4.1.637.3.1.5.6.1.1.4 | INTEGER | read-only | This object represents the backup internal connection ifIndex for a given internal connection defined between internal subscriber node administrator and internal subscriber operation and maintenance. |
| INT adnIsnaIcDlci | 1.3.6.1.4.1.637.3.1.5.6.1.1.2 | INTEGER | read-only | This object defines the second half of an internal subscriber subsystem internal connection (IC) referenced by an internal fake line DLCI. This internal fake line DLCI is mapped over common memory between the internal subscriber on the operation and maintenance processor and the frame relay service subsystem on the line termination processor. The value of this object is the same one used in a corresponding IC entry called adnIsomVcoutDlci in the adnIsomVcTable table. |
| adnIsnaIcEntry | 1.3.6.1.4.1.637.3.1.5.6.1.1 | not-accessible | Internal connection for internal subscriber subsystem (ISS) table entry. The adnIsnaIcifIndex and adnIsnaIcDlci used in this table have the same values as the ones used in the isom.mib file table adnIsomVcTable. Maintaining the same values for these objects as in the adnIsomVcTable provides the definition for a given ISS internal connection. | |
| INT adnIsnaIcifIndex | 1.3.6.1.4.1.637.3.1.5.6.1.1.1 | INTEGER | read-only | This object defines the first half of an internal subscriber subsystem internal connection (IC) referenced by an internal fake line ifIndex. This internal fake line ifIndex is mapped over common memory between the internal subscriber on the operation and maintenance processor and the frame relay service subsystem on the line termination processor. The value of this object is the same one used in a corresponding IC entry called adnIsomVcifIndex in the adnIsomVcTable table. |
| INT adnIsnaIcOperState | 1.3.6.1.4.1.637.3.1.5.6.1.1.7 | INTEGER | read-only | This object contains the current state of the ISS internal connection. |
| adnIsnaIcTable | 1.3.6.1.4.1.637.3.1.5.6.1 | not-accessible | This is the internal connection table identifying connections mapped within the internal subscriber node administrator (ISNA) and internal subscriber operation & maintenance (ISOM) software component. These connections are mapped one-for-one to frame relay DLCIs defined within the frame relay service software component. | |
| INT adnIsnaIcType | 1.3.6.1.4.1.637.3.1.5.6.1.1.3 | INTEGER | read-only | This object indicates whether this internal connection will act as the primary or backup internal connection for another internal connection. |
| adnIsnaMIB | 1.3.6.1.4.1.637.3.1.5.6 | |||
| INT adnIsnaRouteDlci | 1.3.6.1.4.1.637.3.1.5.6.2.1.2 | INTEGER | read-only | This object is mapped to adnIsnaIcDlci in the adnIsnaIcTable. |
| INT adnIsnaRouteifIndex | 1.3.6.1.4.1.637.3.1.5.6.2.1.1 | INTEGER | read-only | This object is mapped to adnIsnaIcifIndex in the adnIsnaIcTable. |
| IP adnIsnaRouteIpAddrs | 1.3.6.1.4.1.637.3.1.5.6.2.1.3 | IpAddress | read-only | Defines the IP address of any host that needs to communicate with the HSS for network management purposes. This field is used internally by the internal subscriber subsystem to link IP addresses to internal subscriber subsystem data link connection identifiers (DLCI). At a minimum, the IP address of the A1100 NMS must be entered. Any other hosts using applications that would access the HSS need their IP address entered here. |
| adnIsnaRouteIpEntry | 1.3.6.1.4.1.637.3.1.5.6.2.1 | not-accessible | This field describes IP routes for each entry in the adnIsnaRouteIpTable. | |
| IP adnIsnaRouteIpMask | 1.3.6.1.4.1.637.3.1.5.6.2.1.4 | IpAddress | read-only | Defines which bits of the IP address are examined in reading the IP address of any host that needs to communicate with the HSS. Bit fields in the mask that are set to '1' cause the address digit to be significant, bit fields that are set to '0' cause the digit to be ignored. |
| adnIsnaRouteIpTable | 1.3.6.1.4.1.637.3.1.5.6.2 | not-accessible | This is the routing table used by internal subscriber node administrator to determine to which internal connection to route a packet received from the local IP layer. The routing decision is made based on the destination IP address found in the IP packet. | |
| adnIsomMIB | 1.3.6.1.4.1.637.3.1.5.7 | |||
| INT adnIsomTrapDlci | 1.3.6.1.4.1.637.3.1.5.7.3.1.2 | INTEGER | read-only | Mapped to 'adnIsomVcOutDlci' of 'adnIsomVcTable' table, and is defined similar to 'adnIsomVcOutDlci' entry contained in the adnIsomVcTable table. Used to address the DLCI that carries SNMP CU down traps to a defined (IP host) NMS. |
| INT adnIsomTrapifIndex | 1.3.6.1.4.1.637.3.1.5.7.3.1.1 | INTEGER | read-only | This object is mapped to 'adnIsomVcifIndex' of 'adnIsomVcTable' table, and is defined similar to the 'adnIsomVcifIndex' entry contained in the adnIsomVcTable table. Used to address the DLCI that carries SNMP CU down traps to a defined NMS host. |
| IP adnIsomTrapIpAddrs | 1.3.6.1.4.1.637.3.1.5.7.3.1.3 | IpAddress | read-only | Full 4-byte NMS IP address that the Internal Subscriber Operation and maintenance subsystem uses to send a SNMP CU down trap in the event the node supervision subsystem reports a CU down condition. |
| adnIsomTrapIpEntry | 1.3.6.1.4.1.637.3.1.5.7.3.1 | not-accessible | One or several IP host address entries mapped to a single DLCI as referenced by ifIndex, adnIsomVcOutDlci, and adnIsomTrapIpAddrs. | |
| adnIsomTrapIpTable | 1.3.6.1.4.1.637.3.1.5.7.3 | not-accessible | This table contains a list of Network Management System IP (internet protocol) addresses to which an adnHSSCuDownTrap should be sent in the event that the internal subscriber subsystem detects that the CU (control unit) has gone down. The addresses in this table must match the entries in the CU relating to recipients of the adnNodeResync trap. | |
| INT adnIsomVcAdminState | 1.3.6.1.4.1.637.3.1.5.7.2.1.3 | INTEGER | read-write | Defines the desired state of this internal subscriber connection. |
| adnIsomVcEntry | 1.3.6.1.4.1.637.3.1.5.7.2.1 | not-accessible | VC table entry. | |
| INT adnIsomVcifIndex | 1.3.6.1.4.1.637.3.1.5.7.2.1.1 | INTEGER | read-only | This is the ifIndex of the internal subscriber line carrying this internal connection. |
| INT adnIsomVcOperState | 1.3.6.1.4.1.637.3.1.5.7.2.1.4 | INTEGER | read-only | Defines the current state of this internal subscriber connection. |
| INT adnIsomVcOutDlci | 1.3.6.1.4.1.637.3.1.5.7.2.1.2 | INTEGER | read-only | DLCI (Data Link Connection Identifier) for this internal connection in the direction from the internal subscriber on the OM (operations and maintenance) processor towards the FRS (frame relay service) subsystem on the LT (line termination) processor. |
| adnIsomVcTable | 1.3.6.1.4.1.637.3.1.5.7.2 | not-accessible | VC table extensions that serve as alternates to the PVC end-point table in RFC1604, which is not sufficient for the HSS network. Additionally, the Network Management System needs to know the identity of the owner of a given ADN proprietary interface and this is done by utilizing object adnIfSubType=iss of adnIfTable. | |
| ADN adnIsomVcTime | 1.3.6.1.4.1.637.3.1.5.7.2.1.5 | AdnNodeTimeStamp | read-only | Defines the time this internal subscriber connection was initialized. |
| adnIwc | 1.3.6.1.4.1.637.3.1.2.2.4 | |||
| OCT adnLaAdIndex | 1.3.6.1.4.1.637.3.1.5.8.16.1.1 | OCTET STRING | not-accessible | Address, maintained as ASCII decimal. |
| adnLac4 | 1.3.6.1.4.1.637.3.1.2.2.10.2 | |||
| adnLac8 | 1.3.6.1.4.1.637.3.1.2.2.10.3 | |||
| adnLaEntry | 1.3.6.1.4.1.637.3.1.5.8.16.1 | not-accessible | Each entry (row) in the adnLaTable maps a (local) address supported in the node to its internal identifier. | |
| adnLahdrEntry | 1.3.6.1.4.1.637.3.1.5.8.15.1 | not-accessible | Each entry (row) provides information about a header of a specific numbering plan local address table. | |
| INT adnLahdrNum | 1.3.6.1.4.1.637.3.1.5.8.15.1.4 | INTEGER | read-only | Number of address entries in the local address table. |
| ADN adnLahdrStamp | 1.3.6.1.4.1.637.3.1.5.8.15.1.3 | AdnNodeTimeStamp | read-only | Time-of-day stamp of the local address table. |
| adnLahdrTable | 1.3.6.1.4.1.637.3.1.5.8.15 | not-accessible | Provides information about the headers of the local address table separate for each numbering plan. | |
| INT adnLahdrVer | 1.3.6.1.4.1.637.3.1.5.8.15.1.2 | INTEGER | read-only | Local Address header version number. |
| INT adnLaIfIndex | 1.3.6.1.4.1.637.3.1.5.8.16.1.2 | INTEGER | read-only | Interface number at the routing completion point. |
| INT adnLapDLCIIndex | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.1 | INTEGER | not-accessible | DLCI (data link connection identifier) index. |
| CTR adnLapFlowBusyDefers | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.5 | Counter | read-only | The number of times this device was unable to transmit a frame due to a perceived remote busy condition. Busy conditions can result from the receipt of an RNR (receive not ready) from the remote device, the lack of valid sequence number space (window saturation), or other conditions. |
| INT adnLapFlowChangeReason | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.3 | INTEGER | read-only | The reason for the most recent incrementing of adnlapFlowStateChanges. |
| INT adnLapFlowCurrentMode | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.4 | INTEGER | read-only | The current condition of the session. |
| adnLapFlowEntry | 1.3.6.1.4.1.637.3.1.5.4.2.3.1 | not-accessible | This contains information regarding the effects of flow controls in LAP (link access procedure). | |
| OCT adnLapFlowFrmrReceived | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.14 | OCTET STRING | read-only | The information field of the FRMR (frame reject) most recently received. If no FRMR has been received (the normal case) or the information is not available, this will be an OCTET STRING of zero length. |
| OCT adnLapFlowFrmrSent | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.13 | OCTET STRING | read-only | The information field of the FRMR (frame reject) most recently sent. If no FRMR has been sent (the normal case) or the information is not available, this will be an OCTET STRING of zero length. |
| CTR adnLapFlowLinkResets | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.10 | Counter | read-only | The number of times a SABME (set asynchronous balanced mode extended) was received while this interface was in data transfer state. |
| CTR adnLapFlowNrErrorsIns | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.12 | Counter | read-only | The number of Nr (receive sequence number) errors that were detected on this interface while in data transfer state. |
| CTR adnLapFlowNsErrorsIns | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.11 | Counter | read-only | The number of Ns (send sequence number) errors that were detected on this interface while in data transfer state. |
| CTR adnLapFlowRejInPkts | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.7 | Counter | read-only | The number of REJ (reject) frames received by this station. |
| CTR adnLapFlowRejOutPkts | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.6 | Counter | read-only | The number of REJ (reject) frames sent by this station. |
| CTR adnLapFlowStateChanges | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.2 | Counter | read-only | The number of LAP (link access procedure) state changes, including resets. |
| CTR adnLapFlowT200Timeouts | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.8 | Counter | read-only | The number of times a transmission was resent because the T200 timer expired. |
| CTR adnLapFlowT203Timeouts | 1.3.6.1.4.1.637.3.1.5.4.2.3.1.9 | Counter | read-only | The number of times a transmission was resent because the T203 timer expired. |
| adnLapFlowTable | 1.3.6.1.4.1.637.3.1.5.4.2.3 | not-accessible | This table defines the objects recorded by LAP (link access procedure) to provide information about the traffic flow through the interface. | |
| adnLapMIB | 1.3.6.1.4.1.637.3.1.5.4.2 | |||
| INT adnLapParamAlarmsEnable | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.9 | INTEGER | read-only | Indicates whether or not alarm generation is enabled for this interface. |
| adnLapParamEntry | 1.3.6.1.4.1.637.3.1.5.4.2.1.1 | not-accessible | Configured parameter values for a specific LAP (link access procedure). | |
| INT adnLapParamKWindowSize | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.4 | INTEGER | read-only | The default window size for this interface. This is the maximum number of unacknowledged sequenced PDUs (protocol data units) that may be outstanding from this DTE at any one time. |
| INT adnLapParamN200RxmitCount | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.5 | INTEGER | read-only | The default N200 retry counter for this interface. This specifies the number of times a PDU (protocol data unit) will be resent after timer T200 expires without acknowledging the PDU. |
| INT adnLapParamN201FrameSize | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.3 | INTEGER | read-only | The default maximum N201 information field size (in number of bits) for a frame the DCE/remote DTE exchanges with this DTE. This excludes flags and 0 bits inserted for transparency. |
| INT adnLapParamPerfEnable | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.10 | INTEGER | read-only | Indicates whether or not statistics generation is enabled for this interface. |
| INT adnLapParamProtocolID | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.8 | INTEGER | read-only | This identifies the protocol to be used on this interface. Common name: Protocol |
| INT adnLapParamStationType | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.2 | INTEGER | read-only | Identifies the desired station type of this interface. |
| INT adnLapParamT200AckTimer | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.6 | INTEGER | read-only | The default T200 timer for this interface. This specifies the maximum time (in milliseconds) to wait for acknowledgment of a PDU (protocol data unit). |
| INT adnLapParamT203IdleTimer | 1.3.6.1.4.1.637.3.1.5.4.2.1.1.7 | INTEGER | read-only | The T203 timer for this interface. This specifies the maximum time (in milliseconds) to allow without frames being exchanged on the data link. A value of '2147483647' indicates that no idle timer is being kept. |
| adnLapParamTable | 1.3.6.1.4.1.637.3.1.5.4.2.1 | not-accessible | This table contains configurable LAP (link access procedure) parameters. | |
| adnLaTable | 1.3.6.1.4.1.637.3.1.5.8.16 | not-accessible | Represents the HSS routing services local address table on the control unit and provides access to information used to complete call routing to an access point within the current node. | |
| CTR adnLdrChanAbortIN | 1.3.6.1.4.1.637.3.1.5.10.1.1.4 | Counter | read-only | Number of received frames aborted (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series (RS232, V.35, V36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortAbortedFrames in the rs232SyncPortTable for the v-series line driver. |
| CTR adnLdrChanAbortOUT | 1.3.6.1.4.1.637.3.1.5.10.1.1.9 | Counter | read-only | Number of aborts that occurred during transmission (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series (RS232, V.35, V.36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortInterruptedFrames in the rs232SyncPortTable for the v-series line driver. |
| CTR adnLdrChanBusyErrIN | 1.3.6.1.4.1.637.3.1.5.10.1.1.8 | Counter | read-only | Number of sub-frames received which have the busy error. |
| CTR adnLdrChanCosNrtOutErrors | 1.3.6.1.4.1.637.3.1.5.10.1.1.20 | Counter | read-only | Number of errors while transmitting Non-real-time Class of Service data by the line driver. |
| CTR adnLdrChanCosNrtOutOctets | 1.3.6.1.4.1.637.3.1.5.10.1.1.18 | Counter | read-only | Number of Non-real-time Class of Service Octets transmitted by the line driver. |
| CTR adnLdrChanCosNrtOutPkts | 1.3.6.1.4.1.637.3.1.5.10.1.1.19 | Counter | read-only | Number of Non-real-time Class of Service packets (frame or subframes) transmitted by the line driver. |
| CTR adnLdrChanCosRtOutErrors | 1.3.6.1.4.1.637.3.1.5.10.1.1.17 | Counter | read-only | Number of errors while transmitting Real-time Class of Service data by the line driver. |
| CTR adnLdrChanCosRtOutOctets | 1.3.6.1.4.1.637.3.1.5.10.1.1.15 | Counter | read-only | Number of Real-time Class of Service Octets transmitted by the line driver. |
| CTR adnLdrChanCosRtOutPkts | 1.3.6.1.4.1.637.3.1.5.10.1.1.16 | Counter | read-only | Number of Real-time Class of Service packets (frame or subframes) transmitted by the line driver. |
| CTR adnLdrChanCrcErrIN | 1.3.6.1.4.1.637.3.1.5.10.1.1.5 | Counter | read-only | Number of frames received with a CRC errors (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series (RS232, V.35, V.36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortFrameCheckErr in the rs232SyncPortTable for the v-series line driver. |
| adnLdrChanEntry | 1.3.6.1.4.1.637.3.1.5.10.1.1 | not-accessible | An entry in the line driver (LDR) table. There is one entry for each LDR channel configured. | |
| INT adnLdrChanFlagOrIdle | 1.3.6.1.4.1.637.3.1.5.10.1.1.12 | INTEGER | read-write | This indicates whether flags or idle code is used between frames. Common Name: Flags or Idle Between Frames |
| INT adnLdrChanFramed | 1.3.6.1.4.1.637.3.1.5.10.1.1.14 | INTEGER | read-only | This indicates whether the G.703 (DS1 or E1) interface is framed or unframed (G.703 line driver only). This object is not relevant to the v-series (RS-232, V.35, V.36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. |
| INT adnLdrChanNumOfFlags | 1.3.6.1.4.1.637.3.1.5.10.1.1.11 | INTEGER | read-write | The minimum number of flags to recognize the end of one frame and the start of the next (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortMinFlags in the rs232SyncPortTable for the v-series Line Driver(LDR). |
| CTR adnLdrChanOctetAlignErrIN | 1.3.6.1.4.1.637.3.1.5.10.1.1.7 | Counter | read-only | Number of sub-frames received with misaligned octet errors. |
| CTR adnLdrChanOverRunErrIN | 1.3.6.1.4.1.637.3.1.5.10.1.1.6 | Counter | read-only | Number of sub-frames received which have overrun errors (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series (RS232, V.35, V.36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortReceiveOverrunErrs in the rs232SyncPortTable for the v-series line driver. |
| ADN adnLdrChanStatisticsFlag | 1.3.6.1.4.1.637.3.1.5.10.1.1.2 | AdnEnableDisabled | read-write | Flag indicates if statistics is enabled on this channel. Common Name: Statistics |
| CTR adnLdrChanSubFrameIN | 1.3.6.1.4.1.637.3.1.5.10.1.1.3 | Counter | read-only | Number of sub-frames received by the line driver. |
| adnLdrChanTable | 1.3.6.1.4.1.637.3.1.5.10.1 | not-accessible | This table contains all the fields supported by all the line drivers. It contains configuration, control and statistics information for the channel. | |
| INT adnLdrChanTimeSlotMask | 1.3.6.1.4.1.637.3.1.5.10.1.1.13 | INTEGER | read-only | This defines the bit location for framed subrate channels (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series or FLIP (fake line internal preocess) line drivers which will respond to an SNMP Get command with a value of zero. This object is related to dsx1LineCoding in the DS1/E1 MIB. For B8ZS (Binary-8 Zero Suppression) and HDB3 (ITU G.703 standard for E1 lines), the usual value is clear64Kbps, but the user can change this to any value. For AMI (Alternate Mark Inversion), the usual value is b8jam56Kbps, but the user can change this to any value except clear64Kbps (because it would violate pulse density). Note that the numerical values of adnLdrChanTimeSlotMask have been chosen so that they correspond to the one's complement of the bit mask used by the hardware. clear64Kbps = Binary 00000000 b8jam56Kbps = Binary 00000001 b7jam56Kbps = Binary 00000010 Any additions to this object's values should follow the same principle. Common Name: Pulse Density Mask |
| INT adnLdrChanType | 1.3.6.1.4.1.637.3.1.5.10.1.1.1 | INTEGER | read-only | Type of line driver to which the channel belongs. |
| CTR adnLdrChanUnderRunErrOUT | 1.3.6.1.4.1.637.3.1.5.10.1.1.10 | Counter | read-only | Number of underrun error that occurred during transmission (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortTransmitUnderrunErrs in the rs232SyncPortTable for the v-series Line Driver (LDR). |
| adnLdrMIB | 1.3.6.1.4.1.637.3.1.5.10 | |||
| adnLocalAddrEntry | 1.3.6.1.4.1.637.3.1.5.8.31.1 | not-accessible | Each entry (row) in the adnLocalAddrTable maps a (local) address supported in the node to a local interface. | |
| INT adnLocalAddrIfIndex | 1.3.6.1.4.1.637.3.1.5.8.31.1.3 | INTEGER | read-only | Value of Interface Index for each Local Address. |
| OCT adnLocalAddrIndex | 1.3.6.1.4.1.637.3.1.5.8.31.1.1 | OCTET STRING | not-accessible | Address, maintained as ASCII decimal. |
| INT adnLocalAddrNumIfIndex | 1.3.6.1.4.1.637.3.1.5.8.31.1.2 | INTEGER | not-accessible | Number of ifindex per local address end point or Interface number at the routing completion point. |
| adnLocalAddrTable | 1.3.6.1.4.1.637.3.1.5.8.31 | not-accessible | Represents the HSS routing services local address table on the control unit and provides access to information used to complete call routing to an access point within the current node. | |
| adnLpu | 1.3.6.1.4.1.637.3.1.2.2.1 | |||
| INT adnLSUbroadcastfreez | 1.3.6.1.4.1.637.3.1.5.8.2.1.3 | INTEGER | read-write | Status of the link state update processing. When the status is active, no link state update for the node is broadcast for a period of time. |
| adnManAjhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.9.1 | not-accessible | Each entry (row) provides the information about a header of a specific manual adjacency table. | |
| INT adnManAjhdrNum | 1.3.6.1.4.1.637.3.1.5.8.9.1.3 | INTEGER | read-only | Number of adjacent node entries in the manual adjacency table. |
| ADN adnManAjhdrStamp | 1.3.6.1.4.1.637.3.1.5.8.9.1.2 | AdnNodeTimeStamp | read-only | Time-of-day stamp of the manual adjacency table. |
| adnManAjhdrTable | 1.3.6.1.4.1.637.3.1.5.8.9 | not-accessible | Information about the headers of the manual adjacency tables for all types of service. | |
| INT adnManAjhdrVer | 1.3.6.1.4.1.637.3.1.5.8.9.1.1 | INTEGER | read-only | Version number of the manual adjacency table. |
| adnManAjLineEntry | 1.3.6.1.4.1.637.3.1.5.8.11.1 | not-accessible | Each entry (row) in the adnManAjLineTable provides key information about a particular logical line (channel) to the adjacent node. | |
| adnManAjLinehdrEntry | 1.3.6.1.4.1.637.3.1.5.8.10.1 | not-accessible | Each entry (row) in the adnManAjLinehdrTable provides key information about a particular adjacent node. | |
| adnManAjLinehdrTable | 1.3.6.1.4.1.637.3.1.5.8.10 | not-accessible | References to the HSS routing services manual adjacency table on the control unit, used to keep track of adjacent connections, particularly for purposes of load balancing. Node-to-path table path entries reference the adjacency table. The adjacency header table provides access to the information in the adjacency table entry headers. See the adnManAjLineTable for individual lines associated with a particular adjacent node, header. | |
| adnManAjLineTable | 1.3.6.1.4.1.637.3.1.5.8.11 | not-accessible | Access to the line level information in the adjacency table for each adjacent node entry. This table is related to the adnManAjhdrTable, and refers only to the control unit. | |
| INT adnManAjNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.8.10.1.4 | INTEGER | read-only | The area number part of adnManAnodeIndex, the routing area number of the node at the remote endpoint. |
| INT adnManAjNodeMacNum | 1.3.6.1.4.1.637.3.1.5.8.10.1.3 | INTEGER | read-only | The machine number part of adnManAnodeIndex, the routing node ID of the node at the remote endpoint. |
| ADN adnManAnodeIndex | 1.3.6.1.4.1.637.3.1.5.8.10.1.1 | AdnRoutingID | not-accessible | Each adjacent node ID identifies an entry in the adjacency table. |
| ADN adnManDnodeIndex | 1.3.6.1.4.1.637.3.1.5.8.4.1.1 | AdnRoutingID | not-accessible | A destination node ID identifies an entry in the node-to-path table. HSS routing services treats a node ID. |
| adnManNPhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.3.1 | not-accessible | Each row provides information about the header of a specific manual node-to-path table. | |
| INT adnManNPhdrNum | 1.3.6.1.4.1.637.3.1.5.8.3.1.3 | INTEGER | read-only | Number of destination node entries in the manual node-to-path table. |
| INT adnManNPhdrNumPth | 1.3.6.1.4.1.637.3.1.5.8.4.1.2 | INTEGER | read-only | Number of separate paths from the current node to the destination node; note that each path is uniquely associated with an adjacent node. |
| ADN adnManNPhdrStamp | 1.3.6.1.4.1.637.3.1.5.8.3.1.2 | AdnNodeTimeStamp | read-only | Time-of-day stamp of the manual node-to-path table. |
| adnManNPhdrTable | 1.3.6.1.4.1.637.3.1.5.8.3 | not-accessible | Information about the headers of the manual node-to-path tables for all types of service and criteria. | |
| INT adnManNPhdrVer | 1.3.6.1.4.1.637.3.1.5.8.3.1.1 | INTEGER | read-only | Version number of the manual node-to-path table. |
| adnManNPPathhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.4.1 | not-accessible | Each entry (row) in the adnManNPPathhdrTable provides all the information found in a table entry's header of the manual node-to-path table on the control unit. | |
| adnManNPPathhdrTable | 1.3.6.1.4.1.637.3.1.5.8.4 | not-accessible | Defines access to information in the destination node entry headers (Dnode headers) of the manual node-to-path table on the control unit. Dnode header of a node-to-path table entry gives summary information about the routing to that Dnode. See the associated adnManNPpthTable for path information associated with each Dnode header of the adnManNPPathhdrTable. | |
| ADN adnManNPpthAJid | 1.3.6.1.4.1.637.3.1.5.8.5.1.3 | AdnRoutingID | read-only | The node identifier of an adjacent node to which this node is connected, effectively the first hop of a route to the destination node. |
| INT adnManNPpthCost | 1.3.6.1.4.1.637.3.1.5.8.5.1.2 | INTEGER | read-only | Cost of getting to the destination from this node using this path. |
| adnManNPpthEntry | 1.3.6.1.4.1.637.3.1.5.8.5.1 | not-accessible | Each entry (row) in the adnManNPpthTable provides all the information in a particular path entry of the manual node-to-path table on the control unit. | |
| IP adnManNPpthIpAdr | 1.3.6.1.4.1.637.3.1.5.8.5.1.4 | IpAddress | read-only | The IP address of the destination node. |
| adnManNPpthTable | 1.3.6.1.4.1.637.3.1.5.8.5 | not-accessible | Defines access to path information in a destination node entry of the manual node-to-path table on the control unit. | |
| INT adnManPathIndex | 1.3.6.1.4.1.637.3.1.5.8.5.1.1 | INTEGER | not-accessible | Number that identifies path order: first, second, third, etc. Number of paths in an node-to-path table entry is variable. |
| INT adnManRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.8.4.1.4 | INTEGER | read-only | The area number part of adnManDnodeIndex, the routing area number of the node at the remote endpoint. |
| INT adnManRemNodeMacNum | 1.3.6.1.4.1.637.3.1.5.8.4.1.3 | INTEGER | read-only | The machine number part of adnManDnodeIndex, the routing node ID of the node at the remote endpoint. |
| INT adnMaxCost | 1.3.6.1.4.1.637.3.1.5.8.1.1.4 | INTEGER | read-only | Maximum cost of a path to an arbitrary destination node for a type of service and criterion. If the criterion is the number of hops, maximum number of hops. The default value is defined for a criterion equal to the number of hops. |
| INT adnMaxNumPath | 1.3.6.1.4.1.637.3.1.5.8.22.1.2 | INTEGER | read-only | Maximum number of paths to be presented in the node-to-path routing table, for a given destination node, for a specific type of service and criterion. |
| INT adnMaxPath | 1.3.6.1.4.1.637.3.1.5.8.1.1.3 | INTEGER | read-only | Maximum number of paths per node in the node-to-path routing table for a specific type of service and criterion. |
| adnMc4 | 1.3.6.1.4.1.637.3.1.2.2.9.6 | |||
| adnMessMonEntry | 1.3.6.1.4.1.637.3.1.5.8.2.1 | not-accessible | Each entry (row) of the adnMessMonTable provides the general parameters used by the routing services for routing message handling for a specific type of service. | |
| adnMessMonTable | 1.3.6.1.4.1.637.3.1.5.8.2 | not-accessible | General parameters used by the routing services for routing message handling. | |
| INT adnMetricDefHigh | 1.3.6.1.4.1.637.3.1.5.8.22.1.4 | INTEGER | read-only | The high priority default cost metric value used for the specified Type Of Service (TOS), criterion. The default value is set up at initialization. Thus, initially, 'adnMetricMaxHigh' is equal to 'adnMetricDefHigh'. This 'adnMetricDefHigh' allows easy recall of exactly what the default value is. |
| INT adnMetricDefLow | 1.3.6.1.4.1.637.3.1.5.8.22.1.8 | INTEGER | read-only | The low-priority default cost metric value used for the specified Type Of Service, criterion. The default value is set up at initialization. Thus, initially, 'adnMetricMaxLow' is equal to 'adnMetricDefLow'. This 'adnMetricDefLow' allows easy recall of exactly what the default value is. |
| INT adnMetricDefMid | 1.3.6.1.4.1.637.3.1.5.8.22.1.6 | INTEGER | read-only | The mid-priority default cost metric value used for the specified Type Of Service (TOS), criterion. The default value is set up at initialization. Thus, initially, 'adnMetricMaxMid' is equal to 'adnMetricDefMid'. This 'adnMetricDefMid' allows easy recall of exactly what the default value is. |
| INT adnMetricMaxHigh | 1.3.6.1.4.1.637.3.1.5.8.22.1.5 | INTEGER | read-write | The current maximum value for the high priority cost metric value. Initialized to a release specific default, SNMP changeable. The value of the object 'adnMetricMaxHigh' is what is actually used by the routing software. A key use is to identify calculated paths 'too costly' to be considered. |
| INT adnMetricMaxLow | 1.3.6.1.4.1.637.3.1.5.8.22.1.9 | INTEGER | read-write | The current maximum value for the low-priority cost metric value. Initialized to a release specific default, SNMP changeable. The value of the object 'adnMetricMaxLow' is what is actually used by the routing software. A key use is to identify calculated paths 'too costly' to be considered. |
| INT adnMetricMaxMid | 1.3.6.1.4.1.637.3.1.5.8.22.1.7 | INTEGER | read-write | The current maximum value for the mid-priority cost metric value. Initialized to a release specific default, SNMP changeable. The value of the object 'adnMetricMaxMid' is what is actually used by the routing software. A key use is to identify calculated paths 'too costly' to be considered. |
| adnMIB | 1.3.6.1.4.1.637.3.1 | |||
| adnMIBConformance | 1.3.6.1.4.1.637.3.1.7 | |||
| adnMIBTraps | 1.3.6.1.4.1.637.3.1.6 | |||
| STR adnMIBTrapVarsEquipStatusText | 1.3.6.1.4.1.637.3.1.6.5.1 | DisplayString | not-accessible | If present in an adnEquipStatusChange trap, this object contains diagnostic text describing the reason for the equipment status change. |
| INT adnMinTimeBetCalc | 1.3.6.1.4.1.637.3.1.5.8.1.1.5 | INTEGER | read-write | Minimum time between successive route calculations for a specific type of service and criterion and identifies the minimum time between completion of routing services initialization and the first routing calculation. |
| INT adnMinTimeBetLS | 1.3.6.1.4.1.637.3.1.5.8.2.1.1 | INTEGER | read-only | Minimum time between self-generated link state messages for the node. |
| INT adnMinTimeBtwCalc | 1.3.6.1.4.1.637.3.1.5.8.22.1.3 | INTEGER | read-write | Minimum time between successive route calculations for a specific type of service and criterion. |
| adnMsc | 1.3.6.1.4.1.637.3.1.2.2.2 | |||
| adnMsgMonEntry | 1.3.6.1.4.1.637.3.1.5.8.29.1 | not-accessible | Each entry (row) of the adnMsgMonTable provides the general parameters used by the routing services for routing message handling for a specific type of service. | |
| adnMsgMonTable | 1.3.6.1.4.1.637.3.1.5.8.29 | not-accessible | General parameters used by the routing services for routing message handling. | |
| adnNb41b | 1.3.6.1.4.1.637.3.1.2.2.6.1 | |||
| adnNb51b | 1.3.6.1.4.1.637.3.1.2.2.6.2 | |||
| adnNmgsMIB | 1.3.6.1.4.1.637.3.1.5.11 | |||
| adnNmsVpn | 1.3.6.1.4.1.637.3.1.5.21 | |||
| adnNmsVpnAgent | 1.3.6.1.4.1.637.3.1.1.4 | |||
| adnNmsVpnTrapVars | 1.3.6.1.4.1.637.3.1.5.21.1 | |||
| adnNode | 1.3.6.1.4.1.637.3.1.2.1 | |||
| PHY adnNodeAddress | 1.3.6.1.4.1.637.3.1.5.3.1.8 | PhysAddress | read-only | The value of this object identifies the network address of the node's management port. Common name: IP Address |
| INT adnNodeAreaNumber | 1.3.6.1.4.1.637.3.1.5.3.1.13 | INTEGER | read-only | The area number of the node. |
| INT adnNodeAtmNetPloss | 1.3.6.1.4.1.637.3.1.5.3.1.15 | INTEGER | read-only | This value is used for ATM networks. It is the same for all nodes inside a same network. This value represents the probability of cell loss specified by the operator. It is used by ATM traffic management for non real time Variable Bit Rate (VBR) connections. The stored value is the positive value of the decimal logarithm of this probability. For example : 5 means that the probability is '10 to the power of -5'. |
| INT adnNodeClockRefresh | 1.3.6.1.4.1.637.3.1.5.3.1.9 | INTEGER | read-only | This field indicates the period (in minutes) for resynchronizing the clock between CU (Control Unit) and OM (Operations and Maintenance) processors. Common name: Clock Refresh |
| OCT adnNodeCommittedVersion | 1.3.6.1.4.1.637.3.1.5.12.3.1.2 | OCTET STRING | read-only | This object identifies the pathname of the node-level version descriptor file for the committed (validated) HSS software version. The format of the filename is vd.., where is the HSS software version number and is the value modulo 100 of the NMS configuration number, which is incremented at the NMS whenever a new HSS software and/or configuration package is built. is the product release number (1 digit, 0-9), is the functional version (1 digit, 0-9), is the sub-function version within the release (2 digits, 00-99), is the fix version number, (2 digits, 01-99), and is a number that the Network Management System assigns to insure uniqueness of the version number, (2 digits, 00-99). |
| INT adnNodeConfigFrom | 1.3.6.1.4.1.637.3.1.5.3.1.16 | INTEGER | read-only | This value is used to indicate the origin of the configuration. In case of configuration from HIT (HSS Installation Tool) some checks are suppressed. |
| STR adnNodeContact | 1.3.6.1.4.1.637.3.1.5.3.1.3 | DisplayString | read-only | The textual identification of the contact person for this managed node, and information on how to contact the person. Common name: Contact |
| STR adnNodeDescr | 1.3.6.1.4.1.637.3.1.5.3.1.2 | DisplayString | read-only | A textual description of the entity. This value should include the full name and version identification of the node's hardware type, software operating system, and networking software. The value may only contain printable ASCII characters. Common names: Node Description, Description |
| adnNodeEntry | 1.3.6.1.4.1.637.3.1.5.3.1 | not-accessible | An entry that augments a equipment entry for a node. This table is based on the system table of MIB-II. | |
| INT adnNodeIndex | 1.3.6.1.4.1.637.3.1.5.3.1.1 | INTEGER | read-only | A unique value for each node in the agent's domain. This object corresponds to the adnEquipIndex in the equipment table. Release 2.0 and 2.1 only have one entry in the node table, but multiple entries may be present for the regional CU (control unit) environment. Common name: Node Index |
| STR adnNodeLocation | 1.3.6.1.4.1.637.3.1.5.3.1.5 | DisplayString | read-only | The physical location of this node (for example, `telephone closet, 3rd floor'). This information helps a service technician find the node. Common name: Location |
| INT adnNodeMachineNumber | 1.3.6.1.4.1.637.3.1.5.3.1.12 | INTEGER | read-only | The node number inside the area. |
| INT adnNodeMaxChassis | 1.3.6.1.4.1.637.3.1.5.3.1.11 | INTEGER | read-only | This field indicates the maximum number of chassis that may be configured in this node. That is, this is the maximum value of the chassis number. The value of this nominator depends upon the HSS model. |
| STR adnNodeName | 1.3.6.1.4.1.637.3.1.5.3.1.4 | DisplayString | read-only | An administratively assigned name for this managed node. By convention, this is the node's fully qualified domain name. Common name: Name |
| INT adnNodeNetworkType | 1.3.6.1.4.1.637.3.1.5.3.1.14 | INTEGER | read-only | This field indicates the type of the network. It is the same for all nodes inside a same network. This object is used by ATM signalling to fill in the location field of the CAUSE Information Element in the release messages. This object could be used by Frame Relay signalling as well. |
| INT adnNodeNMSBuildNumber | 1.3.6.1.4.1.637.3.1.5.12.3.1.5 | INTEGER | read-write | This object is the NMS configuration number of the HSS version (software and configuration package) which is transferred to and activated at the HSS. It is set by the NMS right after the install procedure. |
| INT adnNodeNMSCommitNumber | 1.3.6.1.4.1.637.3.1.5.12.3.1.4 | INTEGER | read-write | This object is the NMS configuration number of the HSS version (software and configuration package) which is committed at the HSS. It is set by the NMS as part of the commit procedure. |
| INT adnNodeNMSQbuildNumber | 1.3.6.1.4.1.637.3.1.5.12.3.1.6 | INTEGER | read-write | This object is the NMS configuration number of the HSS configuration version built using the Quick interface which is transferred to and activated at the HSS. It is incremented by the NMS after each qConfirm command, and reset after each qRebaseline command. |
| INT adnNodeNumPlan | 1.3.6.1.4.1.637.3.1.5.3.1.7 | INTEGER | read-only | The value of this object identifies the network numbering plan used for the node's management port. Common name: Network Plan |
| ADN adnNodePathAdjNodeID | 1.3.6.1.4.1.637.3.1.5.8.25.1.2 | AdnRoutingID | read-only | An adjacent node to which this node is connected. |
| INT adnNodePathCostHigh | 1.3.6.1.4.1.637.3.1.5.8.25.1.3 | INTEGER | read-only | The high priority cost metric value for getting to this destination node using this path from 'adnNodePathAdjNodeID' node using this path. |
| INT adnNodePathCostLow | 1.3.6.1.4.1.637.3.1.5.8.25.1.5 | INTEGER | read-only | The lowpriority cost metric value for getting to this destination node using this path from 'adnNodePathAdjNodeID' node using this path. |
| INT adnNodePathCostMid | 1.3.6.1.4.1.637.3.1.5.8.25.1.4 | INTEGER | read-only | The middle priority cost metric value for getting to this destination node using this path from 'adnNodePathAdjNodeID' node using this path. |
| adnNodePathEntry | 1.3.6.1.4.1.637.3.1.5.8.25.1 | not-accessible | Each entry (row) in the adnNodePathTable provides all the information in a particular path entry of the current node-to-path table on the control unit. | |
| INT adnNodePathIndex | 1.3.6.1.4.1.637.3.1.5.8.25.1.1 | INTEGER | not-accessible | Number that identifies path order: first, second, third, etc. Number of paths in a node-to-path table entry is variable. |
| INT adnNodePathRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.8.25.1.7 | INTEGER | read-only | The area number part of adnNodePathAdjNodeID, the routing node ID of the node at the remote endpoint. |
| INT adnNodePathRemNodeMacNum | 1.3.6.1.4.1.637.3.1.5.8.25.1.6 | INTEGER | read-only | The machine number part of adnNodePathAdjNodeID, the routing node ID of the node at the remote endpoint. |
| adnNodePathTable | 1.3.6.1.4.1.637.3.1.5.8.25 | not-accessible | Defines access to path information in a destination node entry of a current node-to-path table. | |
| NTF adnNodeResync | 1.3.6.1.4.1.637.3.1.6.1.0.7 | This trap notifies the NMS that the CU board has been reinitialized. | ||
| T/F adnNodeResyncTrap | 1.3.6.1.4.1.637.3.1.5.9.1.2 | TruthValue | read-write | Indicates whether the SNMP agent needs to send adnNodeResync traps. This object is set to true whenever the control unit (CU) board is reinitialized. The SNMP agent keeps sending adnNodeResync traps until the NMS acknowledges the trap by sending an SNMP Set request to reset this object. |
| ADN adnNodeRoutingID | 1.3.6.1.4.1.637.3.1.5.3.1.10 | AdnRoutingID | read-only | This field identifies the node for CANP (Cell Alcatel Network Protocol) and FRANP (Frame Relay Alcatel Network Protocol) signalling. It is also used by path select, routing, and FRS (Frame Relay Service) code. |
| OCT adnNodeRunningVersion | 1.3.6.1.4.1.637.3.1.5.12.3.1.1 | OCTET STRING | read-only | This object identifies the pathname of the node-level version descriptor file for the HSS software version that is currently running. The format of the filename is vd.., where is the HSS software version number and is the value modulo 100 of the NMS configuration number, which is incremented at the NMS whenever a new HSS software and/or configuration package is built. is the product release number (1 digit, 0-9), is the functional version (1 digit, 0-9), is the sub-function version within the release (2 digits, 00-99), is the fix version number, (2 digits, 01-99), and is a number that the Network Management System assigns to insure uniqueness of the version number, (2 digits, 00-99). |
| INT adnNodeServices | 1.3.6.1.4.1.637.3.1.5.3.1.6 | INTEGER | read-only | A value which indicates the set of services that this entity primarily offers. The value is a bitmask where each bit indicates whether the entity supports the services at the corresponding protocol stack layer. In the context of the Internet suite of protocols, values should be calculated accordingly: bit layer functionality --- ----- ------------- 1 1 physical (e.g., repeaters) 2 2 datalink/subnetwork (e.g., bridges) 4 3 internet (e.g., IP gateways) 8 4 end-to-end (e.g., IP hosts) 64 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 have the values 16 and 32, respectively. For example, a node which performs primarily routing functions would have a value of 4. In contrast, a node which is an IP host offering application services would have a value of 72 (72 = 8 + 64). Common name: Services |
| adnNodeSupervisionMIB | 1.3.6.1.4.1.637.3.1.5.15 | |||
| adnNodeTable | 1.3.6.1.4.1.637.3.1.5.3 | not-accessible | A list of node entries. | |
| ADN adnNodeTime | 1.3.6.1.4.1.637.3.1.5.9.1.1 | AdnNodeTimeTicks | read-only | The value of this object identifies the current Coordinated Universal Time (UTC) expressed in elapsed seconds by reading the UTC real-time clock on the control unit (CU) board. |
| OCT adnNodeUncommittedVersion | 1.3.6.1.4.1.637.3.1.5.12.3.1.3 | OCTET STRING | read-only | This object identifies the pathname of the node-level version descriptor file for the uncommitted (non-validated) HSS software version. The format of the filename is vd.., where is the HSS software version number and is the value modulo 100 of the NMS configuration number, which is incremented at the NMS whenever a new HSS software and/or configuration package is built. is the product release number (1 digit, 0-9), is the functional version (1 digit, 0-9), is the sub-function version within the release (2 digits, 00-99), is the fix version number, (2 digits, 01-99), and is a number that the Network Management System assigns to insure uniqueness of the version number, (2 digits, 00-99). If there is no uncommitted software version, then a null string is returned. |
| adnNPhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.23.1 | not-accessible | Each row provides information about the header of a specific automatically built node-to-path table. | |
| IP adnNPhdrIpAdr | 1.3.6.1.4.1.637.3.1.5.8.24.1.2 | IpAddress | read-only | The IP address of the adjacent node. |
| INT adnNPhdrNum | 1.3.6.1.4.1.637.3.1.5.8.23.1.3 | INTEGER | read-only | Number of destination node entries in the node-to-path table. |
| INT adnNPhdrNumPth | 1.3.6.1.4.1.637.3.1.5.8.24.1.3 | INTEGER | read-only | Number of separate paths from the current node to the destination node; note that each path is uniquely associated with an adjacent node. |
| ADN adnNPhdrStamp | 1.3.6.1.4.1.637.3.1.5.8.23.1.2 | AdnNodeTimeStamp | read-only | Time-of-day stamp of the current node-to-path table. |
| adnNPhdrTable | 1.3.6.1.4.1.637.3.1.5.8.23 | not-accessible | Information about the headers of the automatically built node-to-path tables, for all the types of service and criteria. These tables are used for establishing calls within the network. | |
| INT adnNPhdrVer | 1.3.6.1.4.1.637.3.1.5.8.23.1.1 | INTEGER | read-only | Version number of the current node-to-path table. |
| adnNPPathhdrEntry | 1.3.6.1.4.1.637.3.1.5.8.24.1 | not-accessible | Each entry (row) in the adnNPPathhdrTable provides all the information found in a table entry's header of the current node-to-path table on the control unit. | |
| adnNPPathhdrTable | 1.3.6.1.4.1.637.3.1.5.8.24 | not-accessible | Defines access to information in the destination node entry headers of the node-to-path table on the control unit. A destination node header of a node-to-path table entry gives summary information about that destination node's routing status. See the associated adnNodePathTable for the path information associated with each destination node of the adnNPPathhdrTable. | |
| ADN adnNumPlanIndex | 1.3.6.1.4.1.637.3.1.5.8.15.1.1 | AdnRoutesNumPlan | not-accessible | Type of address; for example, X.121. |
| adnOM | 1.3.6.1.4.1.637.3.1.2.4.2 | |||
| adnPac | 1.3.6.1.4.1.637.3.1.2.2.10.1 | |||
| INT adnPhyChannel | 1.3.6.1.4.1.637.3.1.5.16.1.1.4 | INTEGER | read-only | The number of the channel that supports this ifIndex. Line-level interfaces have a channel value of zero. Common Name: Channel |
| INT adnPhyChassis | 1.3.6.1.4.1.637.3.1.5.16.1.1.1 | INTEGER | read-only | The number of the chassis that supports this ifIndex. Common Name: Chassis |
| adnPhyEntry | 1.3.6.1.4.1.637.3.1.5.16.1.1 | not-accessible | An interface entry containing objects for physical and channel-level interfaces. | |
| INT adnPhyLine | 1.3.6.1.4.1.637.3.1.5.16.1.1.3 | INTEGER | read-only | The number of the line that supports this ifIndex. Common Name: Line |
| adnPhysical | 1.3.6.1.4.1.637.3.1.5.16 | |||
| INT adnPhySlot | 1.3.6.1.4.1.637.3.1.5.16.1.1.2 | INTEGER | read-only | The number of the slot that supports this ifIndex. Common Name: Card |
| adnPhyTable | 1.3.6.1.4.1.637.3.1.5.16.1 | not-accessible | A list of physical or channel-level interface entries. | |
| INT adnPmdBoardEnableDisable | 1.3.6.1.4.1.637.3.1.5.18.2.1.1 | INTEGER | read-write | This variable defines whether or not the post mortem dump (PMD) is enabled at the board level. The PMD is enabled at the board level only if it is also enabled at the node level. |
| adnPmdBoardEntry | 1.3.6.1.4.1.637.3.1.5.18.2.1 | not-accessible | An entry in the board table. There will be one entry for each board of a given node. | |
| INT adnPmdBoardFilterStatus | 1.3.6.1.4.1.637.3.1.5.18.2.1.3 | INTEGER | read-write | This variable defines whether or not the post mortem dump (PMD) filter is enabled at the board level. The PMD filter is enabled at the board level only if it is also enabled at the node level. The NMS can activate, deactivate or reset the PMD filter using this variable. After the reset action, the variable takes back its previous value at board level (either enable or disable). |
| INT adnPmdBoardKindOfPmd | 1.3.6.1.4.1.637.3.1.5.18.2.1.2 | INTEGER | read-write | This defines the type of post mortem dump (PMD) to execute. This variable applies at the board level. min : post mortem dump will be minimum (only the failure ~~~ context is provided) at the processor level, unless . the value of adnPmdProcessorKindOfPmd is short, . long or full. . In this case, the more complete PMD is chosen. short : post mortem dump will be short at the processor ~~~~~ level, unless the value of adnPmdProcessorKindOfPmd . is long or full. . In this case, the more complete PMD is chosen. . Short means only the memory areas belonging to the . faulty application and explicitly declared for the . post mortem dump are extracted from the target . memory. long : post mortem dump will be long at the processor ~~~~ level, unless the value of adnPmdProcessorKindOfPmd . is full. . In this case, the full PMD is chosen. . Long means all the memory areas explicitly declared . by the applications for the post mortem dump are . extracted from the target memory. full : post mortem dump will be full (entire memory) ~~~~ at the processor level, no matter what the value is . for adnPmdProcessorKindOfPmd, no matter what the . memory areas declared by the applications are. free : post mortem dump will be processed at the ~~~~ processor level according to the value of the . adnPmdProcessorKindOfPmd object. |
| adnPmdBoardTable | 1.3.6.1.4.1.637.3.1.5.18.2 | not-accessible | The objects in this table define the status of the post mortem dump (PMD) at the board level. The NMS can set or get the PMD status at the board level. If the PMD is disabled at the board level, it is also disabled at the processor level. If it is enabled at the board level, it may be enabled or disabled at the lower (processor) level. PMD is disable means that no PMD is generated. If the PMD filter is disabled at the board level, it is also disabled at the processor level. If it is enabled at the board level, it may be enabled or disabled at the lower (processor) level. PMD filter is disable means that no filter is applicated for each generated PMD. At each PMD a file is created. If the kind of PMD is 'free' at the board level, the kind of PMD generated is determined by the value at the processor level. If it is not 'free', the generated PMD is the most complete kind of those indicated at the board and processor levels. The kind of PMD order is as follows (from least to most complete): . min -> short -> long -> full. | |
| INT adnPmdDumpExecutionReport | 1.3.6.1.4.1.637.3.1.6.5.22 | INTEGER | not-accessible | If the PMD has actually been built, it is ok(1). If it has not been built because the filter mechanism knows that a PMD was previously built for the same fault, it is alreadyBuilt(3), and the file name is filled with the known value. |
| STR adnPmdDumpFilePathName | 1.3.6.1.4.1.637.3.1.6.5.21 | DisplayString | not-accessible | PMD pathname built in the NMS transfer directory. |
| NTF adnPmdDumpFileReady | 1.3.6.1.4.1.637.3.1.6.1.0.11 | The main PMD application sends this trap to the NMS to indicate that a PMD file is ready for collection. The full name of the PMD file is given. If adnPmdDumpExecutionReport has the value `alreadyBuilt', a PMD file already exists for the same fault, and the requested PMD has not been built. This fault has occurred for the adnPmdFrequencyCount time(s). adnPmdNodeSurveillance is set if the file has to be picked up by the NMS. This variable can be modified only by the NMS. adnPmdTargetIdentification indicates the chassis, slot and processor where the PMD has been built. | ||
| NTF adnPmdFailed | 1.3.6.1.4.1.637.3.1.6.1.0.12 | The main PMD application sends this trap to the NMS to indicate that a PMD has failed. If the PMD started and failed during execution, adnPmdDumpExecutionReport returns an error code of 'aborted'. If the PMD never started, then adnPmdDumpExecutionReport returns error code 'nok' (not okay). adnPmdNodeSurveillance is set if the file has to be picked up by the NMS. This variable can be modified only by the NMS. This variable is not relevant for the trap adnPmdFailed because the file has not been built. adnPmdTargetIdentification indicates the chassis, slot and processor where the PMD has failed. | ||
| INT adnPmdFailedDiagnostic | 1.3.6.1.4.1.637.3.1.6.5.23 | INTEGER | not-accessible | The diagnostic is sent to explain why the PMD failed. The significance of each value is described in the document 3CB00572AAAAUBZZA. |
| INT adnPmdFrequencyCount | 1.3.6.1.4.1.637.3.1.6.5.24 | INTEGER | not-accessible | This variable indicates how often a particular fault is occurring. |
| adnPmdMIB | 1.3.6.1.4.1.637.3.1.5.18 | |||
| INT adnPmdMscCrashClass | 1.3.6.1.4.1.637.3.1.6.5.34 | INTEGER | not-accessible | This field contains the class of the crash: - unknown(-1): the processor has been reset by an . external cause. - stop(0) : the reset has been asked by an process. - str(1) : a fatal str occurred. - system(2) : an exception or a system panic . occurred. - other(3) : other. |
| NTF adnPmdMscCrashIndication | 1.3.6.1.4.1.637.3.1.6.1.0.20 | The main PMD sub-system sends this trap to the NMS to indicate that a crash occurred on a MSC (Medium Speed Coupler). This trap is only a crash quick report. To get more information, the operator has to check the PMD file (if it has been authorized to be created : see adnPmdMib). | ||
| STR adnPmdMscCrashOrigin | 1.3.6.1.4.1.637.3.1.6.5.35 | DisplayString | not-accessible | This field depends on the adnPmdMscCrashClass. If adnPmdMscCrashClass is 'str' then the str name is given. If adnPmdMscCrashClass is 'stop' the process name is given. If adnPmdMscCrashClass is 'system' the name of running process when the fault occurred is given. |
| ADN adnPmdMscCrashTime | 1.3.6.1.4.1.637.3.1.6.5.36 | AdnNodeTimeTicks | not-accessible | This field is used to give the time the crash occurred at the MSC (Medium Speed Coupler) level. |
| INT adnPmdNodeEnableDisable | 1.3.6.1.4.1.637.3.1.5.18.1.1.1 | INTEGER | read-write | This variable defines whether or not the post mortem dump (PMD) is enabled at the node level. The NMS can activate or deactivate the PMD using this variable. |
| adnPmdNodeEntry | 1.3.6.1.4.1.637.3.1.5.18.1.1 | not-accessible | An entry in the node table. | |
| INT adnPmdNodeFilterStatus | 1.3.6.1.4.1.637.3.1.5.18.1.1.4 | INTEGER | read-write | This variable defines whether or not the post mortem dump (PMD) filter is enabled at the node level. The NMS can activate, deactivate or reset the PMD filter using this variable. After the reset action, the variable takes back its previous value at node level (either enable or disable). The node level is the highest one in the hierarchy. If the PMD filter is disabled at the node level, it is also disabled at the board and processor levels. If it is enabled at the node level, it is enabled or disabled at board level according to the status at this level. |
| INT adnPmdNodeKindOfPmd | 1.3.6.1.4.1.637.3.1.5.18.1.1.2 | INTEGER | read-write | This defines the type of post mortem dump (PMD) to execute. This variable applies at the node level. min : post mortem dump will be minimum (only the failure ~~~ context is provided) at the board and processor . levels, unless the values of adnPmdBoardKindOfPmd . and adnPmdProcessorKindOfPmd are short, long or . full. . In this case, the more complete PMD is chosen. short : post mortem dump will be short at the board and ~~~~~ processor levels, unless the values of . adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd . are long or full. . In this case, the more complete PMD is chosen. . Short means only the memory areas belonging to the . faulty application and explicitly declared for the . post mortem dump are extracted from the target . memory. long : post mortem dump will be long at the board and ~~~~ processor levels, unless the values of . adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd . is full. . In this case, the full PMD is chosen. . Long means all the memory areas explicitly declared . by the applications for the post mortem dump are . extracted from the target memory. full : post mortem dump will be full (entire memory) ~~~~ at the board and processor levels, no matter what . the values are for adnPmdBoardKindOfPmd and . adnPmdProcessorKindOfPmd, no matter what the memory . areas declared by the applications are. free : the post mortem dump will be processed at the board ~~~~ and processor levels according to the values of the . adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd . objects. |
| INT adnPmdNodeSurveillance | 1.3.6.1.4.1.637.3.1.5.18.1.1.3 | INTEGER | read-write | This defines whether or not the NMS will get the post mortem dump (PMD) files from the node's to_nms transfer directory. If the node is under surveillance (enable) the NMS won't get the PMD files from the to_nms transfer directory but the PMD files continues to be created in this directory. This causes no modification of the PMD mechanism behavior. |
| adnPmdNodeTable | 1.3.6.1.4.1.637.3.1.5.18.1 | not-accessible | The objects in this table define the status of the post mortem dump (PMD) at the node level. The NMS can set or get the PMD status at the node level. The node level is the highest one in the hierarchy. If the PMD is disabled at the node level, it is also disabled at the board and processor levels. If it is enabled at the node level, it may be enabled or disabled at the lower (board and processor) levels. PMD is disable means that no PMD is generated. If the PMD filter is disabled at the node level, it is also disabled at the board and processor levels. If it is enabled at the node level, it may be enabled or disabled at the lower (board and processor) levels. PMD filter is disable means that no filter is applicated for each generated PMD. At each PMD a file is created. If the kind of PMD is 'free' at the node level, the kind of PMD generated is determined by the value at the board level. If it is not 'free', the generated PMD is the most complete kind of those indicated at the node, board and processor levels. The kind of PMD order is as follows (from least to most complete): . min -> short -> long -> full. | |
| INT adnPmdProcessorEnableDisable | 1.3.6.1.4.1.637.3.1.5.18.3.1.1 | INTEGER | read-write | This variable defines whether or not the post mortem dump (PMD) is enabled at the processor level. The PMD is enabled at the processor level only if it is also enabled at the board and node levels. |
| adnPmdProcessorEntry | 1.3.6.1.4.1.637.3.1.5.18.3.1 | not-accessible | An entry in the processor table. There will be one entry for each processor of a given board. | |
| INT adnPmdProcessorFilterStatus | 1.3.6.1.4.1.637.3.1.5.18.3.1.3 | INTEGER | read-write | This variable defines whether or not the post mortem dump (PMD) filter is enabled at the processor level. The PMD filter is enabled at the processor level only if it is also enabled at board and node levels. The NMS can activate, deactivate or reset the PMD filter using this variable. After the reset action, the variable takes back its previous value at processor level (either enable or disable). |
| INT adnPmdProcessorKindOfPmd | 1.3.6.1.4.1.637.3.1.5.18.3.1.2 | INTEGER | read-write | This defines the type of post mortem dump (PMD) to execute. This variable applies at the processor level. min : post mortem dump will provide failure context only. ~~~ short : only the memory areas belonging to the faulty ~~~~~ application and explicitly declared for the post . mortem dump are extracted from the target memory. long : all the memory areas explicitly declared by ~~~~ the applications for the post mortem dump are . extracted from the target memory. full : post mortem dump will be full (entire memory), no ~~~~ matter what the memory areas declared by the . applications are. free : the post mortem dump mechanism will decide itself ~~~~ the kind of PMD to do. |
| adnPmdProcessorTable | 1.3.6.1.4.1.637.3.1.5.18.3 | not-accessible | This object defines the status of the post mortem dump (PMD) at the processor level. The NMS can set or get the PMD status at the processor level. | |
| INT adnPmdTargetIdentification | 1.3.6.1.4.1.637.3.1.6.5.25 | INTEGER | not-accessible | This variable indicates the processor experiencing the fault. The variable is expressed with 5 digits. The first one gives the chassis number, the next two digits give the slot number and the two last digits give the processor number. So, the value CSSPP means that the PMD has been generated by the processor PP of the slot SS of the chassis C. |
| INT adnPmHsCollectInterval | 1.3.6.1.4.1.637.3.1.5.11.3.2 | INTEGER | read-write | Defines the time period between collections of historical statistics. The unit of time for this interval is minutes. Common Name: Historical Stat Collect Timer |
| ADN adnPmHsEnableStats | 1.3.6.1.4.1.637.3.1.5.11.3.1 | AdnEnableDisabled | read-write | Indicates whether historical statistics are collected and processed for all subscribing applications on the node by the Node Management Subsystem. Common Name: Historical Stats Collection |
| STR adnPmHsFilePathName | 1.3.6.1.4.1.637.3.1.5.11.3.7 | DisplayString | read-only | The complete pathname of the current historical statistics file in the Network Management System directory which contains all historical statistics collected since the last posting. The complete pathname starts with and includes the root directory. |
| adnPmHsGroup | 1.3.6.1.4.1.637.3.1.5.11.3 | |||
| ADN adnPmHsMakeStats | 1.3.6.1.4.1.637.3.1.5.11.3.5 | AdnEnableDisabled | read-write | When adnPmHsMakeStats is enabled, historical statistics from all applications that have registered for the service are requested and collected in a common statistics file. After waiting the time interval defined in adnPmHsMakeStatsWindow to receive all responses, the statistics file is transferred to the Network Management System directory and the Network Management System is notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. |
| INT adnPmHsMakeStatsWindow | 1.3.6.1.4.1.637.3.1.5.11.3.6 | INTEGER | read-write | When adnPmHsMakeStats is enabled, historical statistics are requested from all applications that have registered for this service. adnPmHsMakeStatsWindow is the time interval during which responses to these requests are accepted. adnPmHsMakeStatsWindow is specified in units of seconds. Common Name: Make Historical Stats Window |
| INT adnPmHsPostInterval | 1.3.6.1.4.1.637.3.1.5.11.3.3 | INTEGER | read-write | Defines a time period between transfers of the historical statistics file to the Network Management System directory. After each transfer, the Network Management System is notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. Each posting contains only those historical statistics collected since the last posting. The unit of time for this interval is minutes. Common Name: Historical Stats Post Timer |
| ADN adnPmHsPostStats | 1.3.6.1.4.1.637.3.1.5.11.3.4 | AdnEnableDisabled | read-write | When adnPmHsPostStats is enabled, a file containing the current historical statistics is transferred to the Network Management System directory and the Network Management System is subsequently notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. This file contains all the historical statistics collected since the last posting. |
| INT adnPmIsCurrentInterval | 1.3.6.1.4.1.637.3.1.5.11.4.2 | INTEGER | read-only | One of 96 discrete time intervals (or buckets) into which the interval statistics are being collected. |
| ADN adnPmIsEnableStatsCollection | 1.3.6.1.4.1.637.3.1.5.11.4.1 | AdnEnableDisabled | read-write | Indicates whether interval statistics are collected from all subscribing applications on the node by the Node Management Subsystem. Common Name: Interval Stats Collection |
| adnPmIsGroup | 1.3.6.1.4.1.637.3.1.5.11.4 | |||
| NTF adnPmStatisticsFileReady | 1.3.6.1.4.1.637.3.1.6.1.0.5 | This trap indicates whether the historical or interval statistics file, whose path the object following adnTrapCategory defines, is ready to be transferred to the NMS via FTP services. | ||
| INT adnProcCodeChassisIndex | 1.3.6.1.4.1.637.3.1.5.12.2.4.1.1 | INTEGER | not-accessible | Index field that identifies the chassis. Chassis are numbered 1-7. The main chassis (i.e., the one with the active Control Unit) in a multi-chassis node is chassis number 1. In a single-chassis node, the chassis number is 1. This number is provided in hardware by a HLCID card which is plugged into the midplane. |
| INT adnProcCodeOperStatus | 1.3.6.1.4.1.637.3.1.5.12.2.4.1.4 | INTEGER | read-only | This object notifies the NMS of the results of the last command, or whether it is still in progress. |
| INT adnProcCodeProcessorIndex | 1.3.6.1.4.1.637.3.1.5.12.2.4.1.3 | INTEGER | not-accessible | Index field that identifies the processor on a coupler board. Processors on a coupler are numbered 0-3. The number of processors varies depending on the type of coupler. |
| INT adnProcCodeSlotIndex | 1.3.6.1.4.1.637.3.1.5.12.2.4.1.2 | INTEGER | not-accessible | Index field that identifies the slot. Slots within a chassis are numbered 1-12. The first slot on the left when facing the front of the chassis is number 1. This number is provided in hardware through hard-wiring on the midplane. Note that the HBSAC board always has a special slot identifier of 30, but this slot number is never used. |
| INT adnProcCodeState | 1.3.6.1.4.1.637.3.1.5.12.2.4.1.5 | INTEGER | read-only | This object notifies the NMS of the `state' of processor code update processing. The values are: committed -- This processor is not in the process of loading, and the software for this processor is the committed version. actInProgWaitForDownMsg -- An Activate command is in progress, this processor has been reset, and the state machine is waiting for a message confirming that the processor is now down. actInProgWaitForReloadReq -- An Activate command is in progress, this processor has already loaded at least once and then started to reload. The state machine is waiting for another load request. actInProgWaitForSwCompleteMsg -- An Activate command is in progress, and the state machine is waiting for a message to indicate that the software portion of the load has completed. uncommitted -- This processor is not in the process of loading. It is currently running uncommitted software. loadCommittedWaitForDownMsg -- This processor is in the process of loading committed software. The processor has been reset, and the state machine is waiting for a message confirming that the processor is down. loadCommittedWaitForCompleteMsg -- This processor is in the process of loading committed software. The state machine is waiting for a message to indicate that the load has completed. pending -- An Activate command is in progress, and this processor is currently down. When the processor comes up, it will be loaded with the uncommitted software version. actInProgWaitForFwareCompleteMsg -- An Activate command is in progress, and the state machine is waiting for a message to indicate that the firmware portion of the load has completed. actInProgWaitForFlashCompleteMsg -- An Activate command is in progress, and the state machine is waiting for a message to indicate that the update of code into flash memory has completed. actInProgWaitForLoadRequest -- An Activate command is in progress, and this processor has been reset. The state machine is waiting for a request to start the loading process. |
| adnProcCodeUpdateCntlEntry | 1.3.6.1.4.1.637.3.1.5.12.2.4.1 | not-accessible | An entry in the processor code portion of the Update Control table. | |
| adnProcCodeUpdateCntlTable | 1.3.6.1.4.1.637.3.1.5.12.2.4 | not-accessible | The Update Control table contains objects for processor code operational status between the HSS and the NMS. | |
| adnProcessor | 1.3.6.1.4.1.637.3.1.2.4 | |||
| adnProcessorEntry | 1.3.6.1.4.1.637.3.1.5.15.6.1 | not-accessible | An entry in the processor table. There is one entry for each processor of a given board. The index corresponds to equipment type 'processor' in the adnEquipTable. | |
| INT adnProcessorErOrWngStatus | 1.3.6.1.4.1.637.3.1.5.15.6.1.1 | INTEGER | read-only | This variable indicates the gravity of a processor failure. It is a bit map represented as a sum. Each bit position maps to the corresponding position in the nominator adnProcessorStatus (which defines the processor's failure status). The adnProcessorErOrWngStatus bit classifies the failure as either an error (value '1') or a warning (value '0'). A bit value of '0' can also mean the failure classification does not apply to the failure status. |
| INT adnProcessorStatus | 1.3.6.1.4.1.637.3.1.5.15.6.1.2 | INTEGER | read-only | This variable indicates the processor status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for ATM board processors. For all ATM boards except the ASE (ATM Switching Element),the bit positions are : 1 : adnProcessorUFOF user FIFO overflow 2 : adnProcessorUFRF user FIFO read failure 4 : adnProcessorNFOF network FIFO overflow 8 : adnProcessorPHTRAMP BGPHT chip RAM parity error 16 : adnProcessorNFRF network FIFO read failure 32 : adnProcessorNAVC cells received on non-active VC 64 : adnProcessorNAVP cells received on non-active VP 128 : adnProcessorRBOF reception cell buffer overflow 512 : adnProcessorPWF power failure For the ASE board, the bit positions are : 16384 : adnProcessorQRP0RAMP BGQRP-0 chip RAM parity error 32768 : adnProcessorQRP0DMA BGQRP-0 chip DMA (Direct Memory Access) error 65536 : adnProcessorQRP0FIFO BGQRP-0 chip extraction FIFO error 131072 : adnProcessorQRP1RAMP BGQRP-1 chip RAM parity error 262144 : adnProcessorQRP1DMA BGQRP-1 chip DMA error 524288 : adnProcessorQRP1FIFO BGQRP-1 chip extraction FIFO error 1048576 : adnProcessorQRP2RAMP BGQRP-2 chip RAM parity error 2097152 : adnProcessorQRP2DMA BGQRP-2 chip DMA error 4194304 : adnProcessorQRP2FIFO BGQRP-2 chip extraction FIFO error 8388608 : adnProcessorQRP3RAMP BGQRP-3 chip RAM parity error 16777216 : adnProcessorQRP3DMA BGQRP-3 chip DMA error 33554432 : adnProcessorQRP3FIFO BGQRP-3 chip extraction FIFO error 67108864 : adnProcessorHMP0LLPC BGHMP-0 chip loss of low-priority cells 134217728 : adnProcessorHMP0LHPC BGHMP-0 chip loss of high-priority cells 268435456 : adnProcessorHMP0SYNC BGHMP-0 chip synchronization fault 536870912 : adnProcessorHMP1LLPC BGHMP-1 chip loss of low-priority cells 1073741824: adnProcessorHMP1LHPC BGHMP-1 chip loss of high-priority cells 2147483648: adnProcessorHMP1SYNC BGHMP-1 chip synchronization fault N.B.: This variable is significant when the operational state of the processor is disabled. When there is no processor error, this variable has the value 0. |
| adnProcessorTable | 1.3.6.1.4.1.637.3.1.5.15.6 | not-accessible | This table is the processor table. | |
| adnProprietary | 1.3.6.1.4.1.637.3.1.5 | |||
| adnProtocols | 1.3.6.1.4.1.637.3.1.5.4 | |||
| INT adnProtocolType | 1.3.6.1.4.1.637.3.1.5.19.1.5 | INTEGER | read-only | The value of this object represents the protocol used on interfaces. xfr and xcm protocols are ALCATEL proprietary protocols that are used for PSX and ACX internal links. x25 is a standard protocol that is used for connecting an ACX configured as a concentrator to a PSX. g25 is an ALCATEL proprietary protocol that is used for connecting an ALCATEL 1100 NETWORK to another packet switching network via an X25 gateway link. x75 is a standard protocol used for connecting an ALCATEL 1100 NETWORK to another packet switching network via an X75 gateway link. |
| adnPsx | 1.3.6.1.4.1.637.3.1.2.1.7 | |||
| adnPsxAcxAgent | 1.3.6.1.4.1.637.3.1.1.3 | |||
| NTF adnPsxAcxEquipStatusChange | 1.3.6.1.4.1.637.3.1.6.6.0.1 | The indicated equipment has changed state. This trap is sent only if adnEquipTrapEnableMask has the bit set for the changed state or status. | ||
| adnPsxCard | 1.3.6.1.4.1.637.3.1.2.2.9 | |||
| INT adnPsxCouplerIndex | 1.3.6.1.4.1.637.3.1.6.5.40 | INTEGER | not-accessible | The value of this object corresponds to the adnEquipIndex of the coupler. Common name: Equip Index |
| INT adnPsxCouplerNumber | 1.3.6.1.4.1.637.3.1.6.5.41 | INTEGER | not-accessible | The value of this object corresponds to the Coupler number in the alarm data. Common name: PSX Coupler Number |
| NTF adnPsxCouplerStatusChange | 1.3.6.1.4.1.637.3.1.6.6.0.3 | The indicated coupler has changed state. This trap is sent to the NMS for being forwarded in proprietary ASCII format to RATP management system. | ||
| INT adnPsxFrontEndNumber | 1.3.6.1.4.1.637.3.1.6.5.39 | INTEGER | not-accessible | The value of this object corresponds to the Front end number in the alarm data. Common name: PSX Front End Number |
| INT adnPsxFtdIndex | 1.3.6.1.4.1.637.3.1.6.5.38 | INTEGER | not-accessible | The value of this object corresponds to the adnEquipIndex of the FTD card. Common name: Equip Index |
| INT adnPsxNmcAlarmCode | 1.3.6.1.4.1.637.3.1.6.5.37 | INTEGER | not-accessible | The value of this object is the code of the alarm received from the NMC. Common name: alarm code |
| NTF adnPsxVppStatusChange | 1.3.6.1.4.1.637.3.1.6.6.0.2 | The VPP of the indicated PSX has changed state. This trap is sent to the NMS for being forwarded in proprietary ASCII format to RATP management system | ||
| STR adnPVCConnectHighIfName | 1.3.6.1.4.1.637.3.1.5.21.1.2 | DisplayString | not-accessible | The ifName of the high endpoint interface for this PVC segment. The term high implies that this PVC segment end-point has the numerically higher ifIndex value than the connected/associated PVC segment end-point. |
| STR adnPVCConnectLowIfName | 1.3.6.1.4.1.637.3.1.5.21.1.1 | DisplayString | not-accessible | The ifName of the low endpoint interface for this PVC segment. The term low implies that this PVC segment end-point has the numerically lower ifIndex value than the connected/associated PVC segment end-point. |
| INT adnRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.8.24.1.5 | INTEGER | read-only | The area number part of adnDnodeIndex, the routing area number of the node at the remote endpoint. |
| INT adnRemNodeMacNum | 1.3.6.1.4.1.637.3.1.5.8.24.1.4 | INTEGER | read-only | The machine number part of adnDnodeIndex, the routing node ID of the node at the remote endpoint. |
| adnRoutesMIB | 1.3.6.1.4.1.637.3.1.5.8 | |||
| adnRoutingCriteria | 1.3.6.1.4.1.637.3.1.10 | |||
| NTF adnRoutingInaccuracyTrap | 1.3.6.1.4.1.637.3.1.6.1.0.8 | The first time the number of denied resource allocations exceeds a threshold during the previous 30 seconds, this trap is issued. When routing tables can again be successfully built during a threshold period, another trap is issued to clear this condition. | ||
| NTF adnRoutingInaccuracyTrapClear | 1.3.6.1.4.1.637.3.1.6.1.0.9 | After a potential routing table inaccuracy trap was sent, this trap generates to indicate that routing tables can be successfully built again. The number of denied resource allocations dropping lower than a threshold determines this change in condition. | ||
| adnRs232 | 1.3.6.1.4.1.637.3.1.4.10.33 | |||
| CTR adnRs232InSigChanges | 1.3.6.1.4.1.637.3.1.4.10.33.1.1.4 | Counter | read-only | The number of times the input signal has changed from 'on' to 'off' or from 'off' to 'on'. 'NoSuchInstance' is returned in case of the HBCEU board. |
| CTR adnRs232InSigDuration | 1.3.6.1.4.1.637.3.1.4.10.33.1.1.5 | Counter | read-only | The duration the input signal has been in the 'on' state for the tm(1), cts(6), dsr(7), dcd(8) signals of the HBCEU board. The duration the input signal has been in the 'off' state for the x21ind(5) signal of the HBCEU board. |
| adnRs232InSigEntry | 1.3.6.1.4.1.637.3.1.4.10.33.1.1 | not-accessible | Input control signal status for a hardware port. | |
| INT adnRs232InSigName | 1.3.6.1.4.1.637.3.1.4.10.33.1.1.2 | INTEGER | read-only | Identification of a hardware input signal, as follows: tm Test Mode lal Local Loop rdl Remote Loop x21cont X.21 Control x21ind X.21 Indication cts Clear To Send dsr Data Set Ready dcd Received Line Signal Detector The cts, dsr and dcd signals are repeated from RFC 1659 to provide an index to object adnRs232InSigDuration. |
| NUM adnRs232InSigPortIndex | 1.3.6.1.4.1.637.3.1.4.10.33.1.1.1 | InterfaceIndex | read-only | The value of adnRs232PortIndex for the port to which this entry belongs. |
| INT adnRs232InSigState | 1.3.6.1.4.1.637.3.1.4.10.33.1.1.3 | INTEGER | read-only | The current input signal state. |
| adnRs232InSigTable | 1.3.6.1.4.1.637.3.1.4.10.33.1 | not-accessible | A list of port input control signal entries, implemented and visible to the software on the port, and useful to monitor. | |
| CTR adnRs232OutSigChanges | 1.3.6.1.4.1.637.3.1.4.10.33.2.1.4 | Counter | read-only | The number of times the output signal has changed from 'on' to 'off' or from 'off' to 'on'. 'NoSuchInstance' is returned in case of the HBCEU board. |
| adnRs232OutSigEntry | 1.3.6.1.4.1.637.3.1.4.10.33.2.1 | not-accessible | Output control signal status for a hardware port. | |
| INT adnRs232OutSigName | 1.3.6.1.4.1.637.3.1.4.10.33.2.1.2 | INTEGER | read-only | Identification of a hardware output signal, as follows: tm Test Mode lal Local Loop rdl Remote Loop x21cont X.21 Control x21ind X.21 Indication cts Clear To Send dsr Data Set Ready dcd Received Line Signal Detector The cts, dsr and dcd signals are repeated from RFC 1659 for consistency with object adnRs232InSigName. The cts, dsr and dcd signals aren't used in adnRs232OutSigTable. |
| NUM adnRs232OutSigPortIndex | 1.3.6.1.4.1.637.3.1.4.10.33.2.1.1 | InterfaceIndex | read-only | The value of adnRs232PortIndex for the port to which this entry belongs. |
| INT adnRs232OutSigState | 1.3.6.1.4.1.637.3.1.4.10.33.2.1.3 | INTEGER | read-only | The current output signal state. |
| adnRs232OutSigTable | 1.3.6.1.4.1.637.3.1.4.10.33.2 | not-accessible | A list of port output control signal entries, implemented and visible to the software on the port, and useful to monitor. | |
| CTR adnRs232PortDuration | 1.3.6.1.4.1.637.3.1.4.10.33.3.1.2 | Counter | read-only | The duration for which the line has been in the 'off' state. This object applies to V35 and V36 lines of the HBCEU board. The 'off' state of the line is defined by : NOT (dcd up AND tm down AND (dsr up OR cts up)). |
| adnRs232PortEntry | 1.3.6.1.4.1.637.3.1.4.10.33.3.1 | not-accessible | ADN specific parameters values for a port. | |
| NUM adnRs232PortIndex | 1.3.6.1.4.1.637.3.1.4.10.33.3.1.1 | InterfaceIndex | read-only | The value of ifIndex of the port |
| adnRs232PortTable | 1.3.6.1.4.1.637.3.1.4.10.33.3 | not-accessible | A list of port entries. | |
| INT adnRtsbroadcastLSU | 1.3.6.1.4.1.637.3.1.5.8.29.1.2 | INTEGER | read-write | If active, a trigger for a one shot link state update broadcast for this node. The status is reset to inactive when done. |
| INT adnRtsCritCount | 1.3.6.1.4.1.637.3.1.5.8.20.1 | INTEGER | read-only | The number of entries in the criterion cost summary table. |
| adnRtsCritCountGroup | 1.3.6.1.4.1.637.3.1.5.8.20 | |||
| adnRtsCritDlyMnyHop | 1.3.6.1.4.1.637.3.1.10.2 | |||
| adnRtsCritHopNulNul | 1.3.6.1.4.1.637.3.1.10.1 | |||
| INT adnRtsCritID | 1.3.6.1.4.1.637.3.1.5.8.21.1.1 | INTEGER | not-accessible | The entry number for this entry in this criterion cost summary table. This value ranges from 1 to the value of adnRtsCritCount and is equal to the rightmost sub-identifier of the corresponding adnRtsCritOID value. |
| ADN adnRtsCritMetricHigh | 1.3.6.1.4.1.637.3.1.5.8.21.1.3 | AdnRoutingMetricType | read-only | The highest priority routing metric type of this routing criterion cost type. |
| ADN adnRtsCritMetricLow | 1.3.6.1.4.1.637.3.1.5.8.21.1.5 | AdnRoutingMetricType | read-only | The third highest priority routing metric type in this routing criterion cost type. |
| ADN adnRtsCritMetricMid | 1.3.6.1.4.1.637.3.1.5.8.21.1.4 | AdnRoutingMetricType | read-only | The second highest priority routing metric type in this routing criterion cost type. |
| adnRtsCritMnyDlyHop | 1.3.6.1.4.1.637.3.1.10.3 | |||
| ADN adnRtsCritOID | 1.3.6.1.4.1.637.3.1.5.8.21.1.2 | AdnRoutingCriteriaType | read-only | The routing criterion object identifier corresponding to adnRtsCritID. |
| adnRtsCritSmryEntry | 1.3.6.1.4.1.637.3.1.5.8.21.1 | not-accessible | An entry in the routing criteria summary table. Each entry represents a particular routing criterion. For a routing criterion consisting of the ordered set of metric types { metric1, metric2, metric3 } registered as { adnRoutingCriteria n }, the object adnRtsCritID will have the value 'n', adnRtsCritOID will have the value '{ adnRoutingCriteria n }', adnRtsCritMetricHigh will have the value 'metric1', adnRtsCritMetricMid will have the value 'metric2' and adnRtsCritMetricLow will have the value 'metric3'. | |
| adnRtsCritSmryTable | 1.3.6.1.4.1.637.3.1.5.8.21 | not-accessible | This table summarizes each supported criterion cost, giving the ID (unique identifier) and the order and IDs of the three cost metrics that comprise the criterion cost. | |
| ADN adnRtsDefaultNodeID | 1.3.6.1.4.1.637.3.1.5.8.32.1 | AdnRoutingID | read-write | This routing node ID is used if there is no matching entry (exact or partial) for a destination address in the address to node table (adnAnTable). This is created in response to CDC # 8447 to add 'sink address' feature for IISP. The default value is '0'. |
| adnRtsGlobalGroup | 1.3.6.1.4.1.637.3.1.5.8.32 | |||
| INT adnRtsLSUbroadcastfreez | 1.3.6.1.4.1.637.3.1.5.8.29.1.3 | INTEGER | read-write | Status of the link state update processing. When the status is active, no link state update for the node is broadcast for a period of time. |
| adnRtsMHStatsEntry | 1.3.6.1.4.1.637.3.1.5.8.30.1 | not-accessible | Each entry (row) in the adnRtsMHStatsTable provides node level statistics. | |
| adnRtsMHStatsTable | 1.3.6.1.4.1.637.3.1.5.8.30 | not-accessible | Statistics regarding Routes Message Handler activity associated with particular network nodes, by Type Of Service(TOS), are provided in this table. | |
| INT adnRtsMHTotDupLSU | 1.3.6.1.4.1.637.3.1.5.8.30.1.2 | INTEGER | read-only | The number of duplicate link state update messages, received from the specified node, that were discarded. |
| INT adnRtsMHTotLSU | 1.3.6.1.4.1.637.3.1.5.8.30.1.1 | INTEGER | read-only | The number of link state update messages received from the specified node. |
| INT adnRtsMHTotOldLSU | 1.3.6.1.4.1.637.3.1.5.8.30.1.3 | INTEGER | read-only | The number of link state update messages received from the specified node, that were too old and had to be discarded. |
| INT adnRtsMinTimeBetLS | 1.3.6.1.4.1.637.3.1.5.8.29.1.1 | INTEGER | read-only | Minimum time between self-generated link state messages for the node. |
| INT adnRtsTblDistfreez | 1.3.6.1.4.1.637.3.1.5.8.29.1.4 | INTEGER | read-write | Status of the table distribution processor. When the status is active, the table distributions sent to a coupler card are frozen. |
| INT adnSaConfigFrom | 1.3.6.1.4.1.637.3.1.5.9.1.3 | INTEGER | read-only | This value is used to indicate whether the node has been fully configured from the NMS, or whether the node has been installed for the first time using an HSS installation tool. In the case that an HSS installation tool was used to configure the HSS (either the HSS Installation Tool called HIT, or OSCAR, the On-Site Configuration And Restart tool), the full set of configuration files has not yet been downloaded to the node from the Network Management System. |
| INT adnSaInmpTimer | 1.3.6.1.4.1.637.3.1.5.9.4.2 | INTEGER | read-write | The value of this object identifies the length of the Internal Network Management Protocol (INMP) response timer, measured in seconds. The timer starts whenever an INMP command is sent to another subsystem. If no reply is received within that time, the INMP command fails. The value of this object should be less than the value of adnSaSnmpTimer. |
| INT adnSaLoggedTrapCategory | 1.3.6.1.4.1.637.3.1.5.9.7.1.3 | INTEGER | read-only | The category of the logged trap. This object takes the value of the adnTrapCategory variable of the logged trap that is referenced by adnSaLoggedTrapIndex and adnSaLoggedTrapPartyIndex. |
| adnSaLoggedTrapEntry | 1.3.6.1.4.1.637.3.1.5.9.7.1 | not-accessible | Information about a single trap in the log. Entries in this table are created automatically by the SNMP Agent whenever a trap is sent out. | |
| INT adnSaLoggedTrapIndex | 1.3.6.1.4.1.637.3.1.5.9.7.1.2 | INTEGER | read-only | The trap sequence number of the logged trap. This object takes the value of the snmpTrapNumbers variable of the logged trap that it references. The adnSaLoggedTrapIndex sequence number and the adnSaLoggedTrapPartyIndex together uniquely identify the logged trap. |
| INT adnSaLoggedTrapPartyIndex | 1.3.6.1.4.1.637.3.1.5.9.7.1.1 | INTEGER | read-only | The value of partyIndex for the manager to whom the logged trap was sent. This uniquely identifies the receiving manager. The adnSaLoggedTrapPartyIndex and the adnSaLoggedTrapIndex sequence number together uniquely identify the logged trap. |
| adnSaLoggedTrapReplayEntry | 1.3.6.1.4.1.637.3.1.5.9.8.1 | not-accessible | Information corresponding to a replay request from an SNMP Manager. | |
| INT adnSaLoggedTrapReplayFirst | 1.3.6.1.4.1.637.3.1.5.9.8.1.2 | INTEGER | read-write | The trap sequence number of the first trap in a sequence of one or more logged traps to be replayed. This object takes the value of the snmpTrapNumbers variable of the first trap being requested. The SNMP Agent will look in the adnSaLoggedTrapTable using the given value of adnSaLoggedTrapReplayPartyIndex in the SNMP Set request as the adnSaLoggedTrapPartyIndex, and using the value of this object as adnSaLoggedTrapIndex. After processing a replay command, the SNMP Agent resets this value back to zero. |
| INT adnSaLoggedTrapReplayLast | 1.3.6.1.4.1.637.3.1.5.9.8.1.3 | INTEGER | read-write | The trap sequence number of the last trap in a sequence of one or more logged traps to be replayed. This object takes the value of the snmpTrapNumbers variable of the last trap being requested. The SNMP Agent will look in the adnSaLoggedTrapTable using the given value of adnSaLoggedTrapReplayPartyIndex in the SNMP Set request as the adnSaLoggedTrapPartyIndex, and using the value of this object as adnSaLoggedTrapIndex. After processing a replay command, the SNMP Agent resets this value back to zero. |
| ADN adnSaLoggedTrapReplayOn | 1.3.6.1.4.1.637.3.1.5.9.8.1.4 | AdnEnableDisabled | read-write | This object is set to a value of enabled by the 1100 NMS to request trap replay. Traps numbered between adnSaLoggedTrapReplayFirst and adnSaLoggedTrapReplayLast are sent by the SNMP Agent to the manager identified by adnSaLoggedTrapReplayPartyIndex. The SNMP Agent resets this value to disabled after processing the request. |
| INT adnSaLoggedTrapReplayPartyIndex | 1.3.6.1.4.1.637.3.1.5.9.8.1.1 | INTEGER | read-write | The value of partyIndex for the manager to whom the logged traps were originally sent, and who is now requesting the replay. |
| adnSaLoggedTrapReplayTable | 1.3.6.1.4.1.637.3.1.5.9.8 | not-accessible | The SNMP Agent logged trap replay table. The 1100 NMS SNMP Manager uses this table to request retransmission from the SNMP agent of any traps which are stored in the Logged Trap Table. The 1100 NMS sends an SNMP Set command, specifying a starting sequence number and an ending sequence number (e.g., 18 and 19). Both sequence numbers must be present in the Logged Trap Table for the command to be successful. The SNMP Set command to request replay of traps must contain each of the following objects in this order: adnSaLoggedTrapReplayFirst, adnSaLoggedTrapReplayLast, adnSaLoggedTrapReplayOn. If one of the objects is missing, or the order is incorrect, an error response will be returned with an SNMP error code of genErr(5). If both starting and ending sequence numbers are found in the Logged Traps Table, the SNMP Agent will then replay the traps, starting with the first one specified, and ending with the last one specified. If the value of adnSaLoggedTrapReplayFirst is equal to adnSaLoggedTrapReplayLast, then only one trap is replayed. The ending sequence number may have a lower value than the starting sequence number, in the case that the trap sequence number has reached its maximum and rolled over through zero. The SNMP Agent will look in the adnSaLoggedTrapTable using the value given in the SNMP Set request for adnSaLoggedTrapReplayPartyIndex as the adnSaLoggedTrapPartyIndex, and using the value of adnSaLoggedTrapReplayFirst as the adnSaLoggedTrapIndex. If the first trap is found in the adnSaLoggedTrapTable, then the SNMP Agent will look for the last trap to be replayed, using the value of adnSaLoggedTrapReplayLast as the adnSaLoggedTrapIndex. If either the first trap to be replayed or the last trap to be replayed cannot be found in the adnSaLoggedTrapTable, then an error response is returned with an SNMP error code of genErr(5). The value of adnSaLoggedTrapReplayOn is set to enabled by the 1100 NMS in the Set command, and is reset to disabled by the SNMP Agent when the command has been processed. If the procesing of the command identifies any traps to be replayed, then these are all sent out immediately by the SNMP Agent. | |
| adnSaLoggedTrapTable | 1.3.6.1.4.1.637.3.1.5.9.7 | not-accessible | The SNMP Agent logged trap table. The SNMP Agent logs in this table the last several traps (up to a maximum of 10) sent from the agent to each destination party. The 1100 NMS will use the trap sequence number information to detect lost traps (from a discontinuity in the received sequence numbers, e.g., number 17 followed by number 20), and will then send an SNMP command to the HSS SNMP Agent to request replay of any lost traps (e.g., 18 and 19). The Logged Trap Table is a circular list. When the maximum capacity is reached (the maximum number of traps are already logged), then the next trap sent out overwrites the oldest trap in the Logged Trap Table. If a request is received to replay more traps than are stored in the Logged Trap Table, then the request will be refused with the SNMP error code genErr(5). The Logged Trap Table is cleared upon HSS CU restart. | |
| STR adnSaMIBFilePathName | 1.3.6.1.4.1.637.3.1.5.9.5.1 | DisplayString | read-only | The value of this object is the path and filename of the MIB template that is loaded in the agent. |
| adnSaMibMgt | 1.3.6.1.4.1.637.3.1.5.9.5 | |||
| OCT adnSaQtpFileContents | 1.3.6.1.4.1.637.3.1.5.9.6.3 | OCTET STRING | read-write | The value of this object is an octet string containing the contents of a configuration file that is to be created by the SNMP Agent. The file will be named according to the value of adnSaQtpFileName. |
| STR adnSaQtpFileName | 1.3.6.1.4.1.637.3.1.5.9.6.2 | DisplayString | read-write | The value of this object is the filename of a configuration file that is to be created by the SNMP Agent. |
| adnSaQtpGroup | 1.3.6.1.4.1.637.3.1.5.9.6 | |||
| T/F adnSaQtpInitial | 1.3.6.1.4.1.637.3.1.5.9.6.1 | TruthValue | read-write | Indicates whether the Quick Transfer Protocol is being initialized for a new sequence of SNMP Set messages. This value is set to true by the NMS in the first SNMP Set command of a sequence used to transfer a group of configuration files. The HSS resets the value of this object back to false immediately. |
| INT adnSaSnmpTimer | 1.3.6.1.4.1.637.3.1.5.9.4.1 | INTEGER | read-write | The value of this object identifies the length of the SNMP response timer, measured in seconds. The timer starts on receipt of an SNMP request. If an SNMP response cannot be returned to the NMS within that time, the SNMP command fails. |
| adnSaSystem | 1.3.6.1.4.1.637.3.1.5.9.1 | |||
| adnSaTrapFilter | 1.3.6.1.4.1.637.3.1.5.9.3 | |||
| adnSaUtility | 1.3.6.1.4.1.637.3.1.5.9.4 | |||
| adnSaViews | 1.3.6.1.4.1.637.3.1.5.9.2 | |||
| adnSE | 1.3.6.1.4.1.637.3.1.2.4.6 | |||
| adnSfasMIB | 1.3.6.1.4.1.637.3.1.5.9 | |||
| GAU adnsonetCurrentBBEs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered during the current 15-minute interval. |
| adnsonetCurrentEntry | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1 | not-accessible | An entry in the ADN SONET/SDH Current table. | |
| GAU adnsonetCurrentESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered during the current 15-minute interval. |
| GAU adnsonetCurrentSESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered during the current 15-minute interval. |
| adnsonetCurrentTable | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.1 | not-accessible | The ADN SONET/SDH Current table. | |
| GAU adnsonetCurrentUASs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1.4 | Gauge | read-only | The number of unavailable seconds (UAS) encountered during the current 15-minute interval. |
| GAU adnsonetDayBBEs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered during the current day (from 0 hours to the current time). |
| adnsonetDayEntry | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1 | not-accessible | An entry in the ADN SONET/SDH Day table. | |
| GAU adnsonetDayESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered during the current day (from 0 hours to the current time). |
| GAU adnsonetDaySESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered during the current day (from 0 hours to the current time). |
| adnsonetDayTable | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.4 | not-accessible | The ADN SONET/SDH Day table. | |
| GAU adnsonetDayUASs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1.4 | Gauge | read-only | Number of unavailable seconds (UAS) encountered during the current day (from 0 hours to the current time). |
| GAU adnsonetFarEndCurrentBBEs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.1.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during the current 15-minute interval. |
| adnsonetFarEndCurrentEntry | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.1.1 | not-accessible | An entry in the ADN SONET/SDH Far End Current table. | |
| GAU adnsonetFarEndCurrentESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.1.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during the current 15-minute interval. |
| GAU adnsonetFarEndCurrentSESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.1.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during the current 15-minute interval. |
| adnsonetFarEndCurrentTable | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.1 | not-accessible | The ADN SONET/SDH Far End Current table. | |
| GAU adnsonetFarEndDayBBEs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.4.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| adnsonetFarEndDayEntry | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.4.1 | not-accessible | An entry in the ADN SONET/SDH Far End Day table. | |
| GAU adnsonetFarEndDayESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.4.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| GAU adnsonetFarEndDaySESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.4.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| adnsonetFarEndDayTable | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.4 | not-accessible | The ADN SONET/SDH Far End Day table. | |
| GAU adnsonetFarEndIntervalBBEs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1.4 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during a particular 15-minute interval. |
| adnsonetFarEndIntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1 | not-accessible | An entry in the ADN SONET/SDH Far End Interval table. | |
| GAU adnsonetFarEndIntervalESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1.2 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during a particular 15-minute interval. |
| INT adnsonetFarEndIntervalNumber | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1.1 | INTEGER | not-accessible | A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| GAU adnsonetFarEndIntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1.3 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during a particular 15-minute interval. |
| adnsonetFarEndIntervalTable | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.2 | not-accessible | The ADN SONET/SDH Far End Interval table. | |
| adnsonetFarEndITUperf | 1.3.6.1.4.1.637.3.1.4.10.39.4.2 | |||
| GAU adnsonetFarEndTotalBBEs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.3.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End BBE statistics for the 96 15-minute intervals. |
| adnsonetFarEndTotalEntry | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.3.1 | not-accessible | An entry in the ADN SONET/SDH Far End Total table. | |
| GAU adnsonetFarEndTotalESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.3.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End ES statistics for the 96 15-minute intervals. |
| GAU adnsonetFarEndTotalSESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.3.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End SES statistics for the 96 15-minute intervals. |
| adnsonetFarEndTotalTable | 1.3.6.1.4.1.637.3.1.4.10.39.4.2.3 | not-accessible | The ADN SONET/SDH Far End Total table. | |
| GAU adnsonetIntervalBBEs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.4 | Gauge | read-only | Number of background errored blocks (BBE) encountered during a particular 15-minute interval. |
| adnsonetIntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1 | not-accessible | An entry in the ADN SONET/SDH Interval table. | |
| GAU adnsonetIntervalESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.2 | Gauge | read-only | Number of errored seconds (ES) encountered during a particular 15-minute interval. |
| INT adnsonetIntervalNumber | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.1 | INTEGER | not-accessible | A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| GAU adnsonetIntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.3 | Gauge | read-only | Number of severely errored seconds (SES) encountered during a particular 15-minute interval. |
| adnsonetIntervalTable | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.2 | not-accessible | The ADN SONET/SDH Interval table. | |
| GAU adnsonetIntervalUASs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.5 | Gauge | read-only | Number of unavailable seconds (UAS) encountered in a particular 15-minute interval. |
| adnsonetITUperf | 1.3.6.1.4.1.637.3.1.4.10.39.4.1 | |||
| adnsonetLine | 1.3.6.1.4.1.637.3.1.4.10.39.1.3 | |||
| CTR adnsonetLineAIS | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.2 | Counter | read-only | Duration of alarm indication signal (AIS). Counter #2 of the ATM core. |
| CTR adnsonetLineBIP | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.4 | Counter | read-only | Number of 24-bit interleaved parity (BIP-24) errors for STS-3c or STM-1. Number of 96-bit interleaved parity (BIP-96) errors for STS-12c or STM-4. Counter #28 of the ATM core. |
| INT adnsonetLineConfigAIS | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.7 | INTEGER | read-write | This variable indicates if a permanent alarm indication signal (AIS) can be sent on the line. For STM-1 interfaces, this option can't be activated (AIS off). For STS-3c, STS-12c, and STM-4 interfaces, this option can be activated (AIS off or AIS on). It is a configuration option that should be used only for maintenance purposes. Common Name: Forcing a Line Alarm Indication Signal |
| INT adnsonetLineConfigLoopback | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.5 | INTEGER | read-write | This variable indicates if line loopback is activated or deactivated. When activated, received frames are retransmitted on the line. Common Name: Line Loopback |
| INT adnsonetLineConfigRDI | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.6 | INTEGER | read-write | This variable indicates if a permanent remote defect indication (RDI) or Far End Receive Failure (FERF) is sent on the line. It is a configuration option that should be used only for maintenance purposes. Common Name: Forcing a Line Remote Defect Indication |
| adnsonetLineEntry | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1 | not-accessible | An entry in the ADN SONET/SDH Line Current table. | |
| INT adnsonetLineHWStatus | 1.3.6.1.4.1.637.3.1.4.10.39.5.1.1.1.1 | INTEGER | read-only | This variable indicates the hardware status of a line. The given status value corresponds to the last test initiated by setting the nominator ifTestType with adnIfTest- TypeLineHW test identifier. If the result of the test, given by the nominator ifTestResult, is different than 'success' or 'failed', the given status value is not significant. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetLineHWNoDefect bit should be set only if no other bit is set. If the status is not significant, all the bits are reset. The bit positions are : (BBTS1C board): 1 adnsonetLineHWNoDefect 2 not used 4 not used 8 PM5357 chip failure at line side 16 applique failure (BBS1B, BBS1B3, BBS1B2, or BBS1B4 boards): 1 adnsonetLineHWNoDefect 2 BGPHT chip failure 4 BGS1B chip failure at ET side 8 BGS1B chip failure at line side 16 applique failure (BBS4B, or BBS4B2 boards): 1 adnsonetLineHWNoDefect 2 BGPHT chip failure 4 not used 8 PM5355 chip failure at line side 16 applique failure |
| INT adnsonetLinePerfStatus | 1.3.6.1.4.1.637.3.1.4.10.39.5.1.1.1.2 | INTEGER | read-only | This variable indicates the performance status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetNoDefect bit should be set only if no other bit is set. The adnsonetUnavailablePeriod bit indicates that the interface has entered an unavailable period. Each CrossingThreshold bit indicates that the corresponding performance counter has reached its threshold. The bit positions are: 1 adnsonetNoDefect 2 adnsonetUnavailablePeriod 4 adnsonetCurrentCrossingThresholdESs 8 adnsonetCurrentCrossingThresholdSESs 16 adnsonetCurrentCrossingThresholdBBEs 32 adnsonetCurrentCrossingThresholdFarEndESs 64 adnsonetCurrentCrossingThresholdFarEndSESs 128 adnsonetCurrentCrossingThresholdFarEndBBEs 256 adnsonetCurrentCrossingThresholdUASs 512 adnsonetDayCrossingThresholdESs 1024 adnsonetDayCrossingThresholdSESs 2048 adnsonetDayCrossingThresholdBBEs 4096 adnsonetDayCrossingThresholdFarEndESs 8192 adnsonetDayCrossingThresholdFarEndSESs 16384 adnsonetDayCrossingThresholdFarEndBBEs 32768 adnsonetDayCrossingThresholdUASs |
| CTR adnsonetLineRcvRDI | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.3 | Counter | read-only | Duration of remote defect indication (RDI) received from the remote equipement. For a Synchronous Digital Hierarchy (SDH) line, the RDI signal is known as Multiplexing Section Far End Receive Failure (MS-FERF). Counter #3 of the ATM core. |
| INT adnsonetLineStatus | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.1 | INTEGER | read-only | This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetLineNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetLineNoDefect 2 adnsonetLineAIS 4 adnsonetLineRDI 8 adnsonetLineBIP 16 adnsonetLineHighBIP Common Name: Line State |
| adnsonetLineTable | 1.3.6.1.4.1.637.3.1.4.10.39.1.3.1 | not-accessible | The ADN SONET/SDH Line Current table. | |
| adnsonetMaintenance | 1.3.6.1.4.1.637.3.1.4.10.39.5.1 | |||
| adnsonetMaintenanceEntry | 1.3.6.1.4.1.637.3.1.4.10.39.5.1.1.1 | not-accessible | An entry in the ADN SONET/SDH Maintenance table. | |
| adnsonetMaintenanceTable | 1.3.6.1.4.1.637.3.1.4.10.39.5.1.1 | not-accessible | The ADN SONET/SDH Maintenance table. | |
| adnsonetMedium | 1.3.6.1.4.1.637.3.1.4.10.39.1.1 | |||
| CTR adnsonetMediumAppliqueFailure | 1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.4 | Counter | read-only | Duration of applique board failure. Counter #27 of the ATM core. |
| INT adnsonetMediumConfigLaserPower | 1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.6 | INTEGER | read-write | The administrative status of the laser LED on the applique: - LaserON: laser LED in service with automatic laser shutdown (ALS) function disabled, - LaserOFF: laser LED out of service, - LaserNS: laser LED not supported by the applique, - LaserONALS: laser LED in service with ALS function enabled. Common Name: Laser Power |
| INT adnsonetMediumConfigLineClockMode | 1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.5 | INTEGER | read-write | The transmit clock mode of the line: - local timing: the transmit clock is generated by the local board, - loop timing: the transmit clock is the one received from the remote equipment, - through timing: the transmit clock is derived from the recovered receive clock of another interface of the HSS. Common Name: Transmit Clock Mode |
| adnsonetMediumEntry | 1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1 | not-accessible | An entry in the ADN SONET/SDH Medium table. | |
| CTR adnsonetMediumLaserDegradation | 1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.2 | Counter | read-only | Duration of laser degradation. Counter #23 of the ATM core, only available on BBS1Bx board with HAS1B applique and on BBTS1C board. |
| CTR adnsonetMediumLaserTransmitSignalOut | 1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.3 | Counter | read-only | Duration of transmit signal out of range. Counter #24 of the ATM core, only available on BBS1Bx board with HAS1B applique and on BBTS1C board. |
| INT adnsonetMediumStatus | 1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.1 | INTEGER | read-only | This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetMediumNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetMediumNoDefect 2 adnsonetMediumLaserDegradation 4 adnsonetMediumLaserTransmitSignalOut 8 adnsonetMediumAppliqueFailure (obsolete) Common Name: Medium State |
| adnsonetMediumTable | 1.3.6.1.4.1.637.3.1.4.10.39.1.1.1 | not-accessible | The ADN SONET/SDH Medium table. | |
| adnsonetMIB | 1.3.6.1.4.1.637.3.1.4.10.39 | |||
| adnsonetObjects | 1.3.6.1.4.1.637.3.1.4.10.39.1 | |||
| adnsonetObjectsITUperf | 1.3.6.1.4.1.637.3.1.4.10.39.4 | |||
| adnsonetObjectsMaintenance | 1.3.6.1.4.1.637.3.1.4.10.39.5 | |||
| adnsonetObjectsPath | 1.3.6.1.4.1.637.3.1.4.10.39.2 | |||
| adnsonetObjectsTC | 1.3.6.1.4.1.637.3.1.4.10.39.3 | |||
| adnsonetPath | 1.3.6.1.4.1.637.3.1.4.10.39.2.1 | |||
| CTR adnsonetPathAIS | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.4 | Counter | read-only | Duration of alarm indication signal (AIS) at path level. Counter #8 of the ATM core. |
| CTR adnsonetPathBIP8 | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.6 | Counter | read-only | Number of 8-bit interleaved parity (BIP-8) errors. Counter #11 of the ATM core. |
| INT adnsonetPathConfigAIS | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.9 | INTEGER | read-write | This variable indicates if a permanent alarm indication signal (AIS) is sent on the path. This is a configuration option that should be used only for maintenance purposes. Common Name: Forcing a Path Alarm Indication Signal |
| INT adnsonetPathConfigRDI | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.8 | INTEGER | read-write | This variable indicates if a permanent remote defect indication (RDI) is sent on the path. For Synchronous Digital Hierarchy (SDH), it indicates if a permanent Far End Receive Failure (FERF) can be sent on the path. This is a configuration option that should be used only for maintenance purposes. Common Name: Forcing a Path Remote Defect Indication |
| adnsonetPathEntry | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1 | not-accessible | An entry in the ADN SONET/SDH Path Current table. | |
| CTR adnsonetPathFEBE | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.7 | Counter | read-only | Number of far end block errors (FEBE) received from the remote equipment at path level. Counter #9 of the ATM core. |
| CTR adnsonetPathLOP | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.3 | Counter | read-only | Duration of loss-of-pointer (LOP). Counter #12 of the ATM core. |
| CTR adnsonetPathRcvRDI | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.5 | Counter | read-only | Duration of remote defect indication (RDI) received from the remote equipment at path level. For Synchronous Digital Hierarchy (SDH), this signal is known as a path Far End Receive Failure (FERF) event. Counter #10 of the ATM core. |
| INT adnsonetPathStatus | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.2 | INTEGER | read-only | This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetPathNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetLineNoDefect 2 adnsonetPathSTSLOP 4 adnsonetPathSTSAIS 8 adnsonetPathSTSRDI 16 adnsonetPathUnequipped * 32 adnsonetPathSignalLabelMismatch * 64 adnsonetPathBIP8 128 adnsonetPathFEBE * not provided by HSS, but the value is required to ensure compatibility with the RFC sonetPathStatus. |
| adnsonetPathTable | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1 | not-accessible | The ADN SONET/SDH Path Current table. | |
| INT adnsonetPathWidth | 1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.1 | INTEGER | read-only | The type of Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) path. |
| adnsonetSection | 1.3.6.1.4.1.637.3.1.4.10.39.1.2 | |||
| adnsonetSectionEntry | 1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1 | not-accessible | An entry in the ADN SONET/SDH Section Current table. | |
| CTR adnsonetSectionLOF | 1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1.3 | Counter | read-only | Duration of loss-of-frame (LOF). Counter #7 of the ATM core. |
| CTR adnsonetSectionLOS | 1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1.2 | Counter | read-only | Duration of loss-of-signal (LOS). Counter #0 of the ATM core. |
| CTR adnsonetSectionOOF | 1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1.4 | Counter | read-only | Number of out-of-frame (OOF) events. Counter #29 of the ATM core. |
| INT adnsonetSectionStatus | 1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1.1 | INTEGER | read-only | This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetSectionNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetSectionNoDefect 2 adnsonetSectionLOS 4 adnsonetSectionLOF 8 adnsonetSectionOOF Common Name: Section State |
| adnsonetSectionTable | 1.3.6.1.4.1.637.3.1.4.10.39.1.2.1 | not-accessible | The ADN SONET/SDH Section Current table. | |
| adnsonetTC | 1.3.6.1.4.1.637.3.1.4.10.39.3.1 | |||
| INT adnsonetTCConfigCRD | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.8 | INTEGER | read-write | The type of cell rate decoupling (CRD) mode selected for the line: - unassigned cells (ANSI) - idle cells (ITU). Common Name: Cell Rate Decoupling |
| CTR adnsonetTCCorrectedHEC | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.3 | Counter | read-only | Number of cells corrected through Header Error Control (HEC) mechanisms. Counter #17 of the ATM core. |
| CTR adnsonetTCDownBufferOverflow | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.6 | Counter | read-only | Number of downward (to remote equipment) cell buffer overflow events. Counter #26 of the ATM core. |
| adnsonetTCEntry | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1 | not-accessible | An entry in the ADN SONET/SDH Transmission Convergence (TC) Current table. | |
| CTR adnsonetTCETtoLTLoss | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.7 | Counter | read-only | Duration of loss of ATM signal from exchange termination processor (ET) to linetermination processor (LT). Counter #25 of the ATM core. |
| CTR adnsonetTCOCD | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.2 | Counter | read-only | Duration of out-of-cell delineation (OCD). Counter #16 of the ATM core. |
| INT adnsonetTCStatus | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.1 | INTEGER | read-only | This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetTCNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetTCNoDefect 2 adnsonetTCOCD 4 adnsonetTCCorrectedHEC 8 adnsonetTCUnCorrectedHEC 16 adnsonetTCUpBufferOverflow 32 adnsonetTCDownBufferOverflow 64 adnsonetTCETtoLTLoss |
| adnsonetTCTable | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1 | not-accessible | The ADN SONET/SDH Transmission Convergence (TC) Current table. | |
| CTR adnsonetTCUnCorrectedHEC | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.4 | Counter | read-only | Number of cells discarded through Header Error Control (HEC) mechanisms. Counter #18 of the ATM core. |
| CTR adnsonetTCUpBufferOverflow | 1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.5 | Counter | read-only | Number of upward (from remote equipment) cell buffer overflow events. Counter #22 of the ATM core. |
| GAU adnsonetTotalBBEs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered during the 24-hour reporting period. It is the sum of BBE statistics for the 96 15-minute intervals. |
| adnsonetTotalEntry | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1 | not-accessible | An entry in the ADN SONET/SDH Total table. | |
| GAU adnsonetTotalESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered during the 24-hour reporting period. It is the sum of ES statistics for the 96 15-minute intervals. |
| GAU adnsonetTotalSESs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered during the 24-hour reporting period. It is the sum of SES statistics for the 96 15-minute intervals. |
| adnsonetTotalTable | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.3 | not-accessible | The ADN SONET/SDH Total table. | |
| GAU adnsonetTotalUASs | 1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1.4 | Gauge | read-only | Number of unavailable seconds (UAS) encountered during the 24-hour reporting period. It is the sum of UAS statistics for the 96 15-minute intervals. |
| INT adnSonetTrapCause | 1.3.6.1.4.1.637.3.1.6.5.10 | INTEGER | not-accessible | Variable that gives cause of the Sonet trap currently being sent. Occurs as a variable-binding of an SNMP trap. |
| adnStatsNodeEntry | 1.3.6.1.4.1.637.3.1.5.8.19.1 | not-accessible | Each entry (row) in the adnStatsNodeTable provides node level statistics. | |
| adnStatsNodeTable | 1.3.6.1.4.1.637.3.1.5.8.19 | not-accessible | Statistics node table that gives access to node level information. | |
| INT adnStatsTotDupLSU | 1.3.6.1.4.1.637.3.1.5.8.19.1.2 | INTEGER | read-only | The number of duplicate link state update messages, received from the specified node, that were discarded. |
| INT adnStatsTotLSU | 1.3.6.1.4.1.637.3.1.5.8.19.1.1 | INTEGER | read-only | The number of link state update messages received from the specified node. |
| INT adnStatsTotOldLSU | 1.3.6.1.4.1.637.3.1.5.8.19.1.3 | INTEGER | read-only | The number of link state update messages received from the specified node, that were too old and had to be discarded. |
| adnSY | 1.3.6.1.4.1.637.3.1.2.4.7 | |||
| adnSync | 1.3.6.1.4.1.637.3.1.2.2.11 | |||
| INT adnTblDistfreez | 1.3.6.1.4.1.637.3.1.5.8.2.1.4 | INTEGER | read-write | Status of the table distribution processor. When the status is active, the table distributions sent to a coupler card are frozen. |
| INT adnTdpIfABW | 1.3.6.1.4.1.637.3.1.5.22.2.1.26 | INTEGER | read-only | The bandwidth, measured in cells per second, allocated to this TDP interface. Common Name: Allocated Bandwidth |
| INT adnTdpIfAvailCellRateEgress | 1.3.6.1.4.1.637.3.1.5.22.2.1.16 | INTEGER | read-only | The available egress cell rate. The cell rate is measured in Cells/Second. The egress direction means the direction of outwards traffic flow from the interface. A value of -1 indicates that the field is not used. Common Name: Available Egress Cell Rate |
| INT adnTdpIfAvailCellRateIn | 1.3.6.1.4.1.637.3.1.5.22.2.1.17 | INTEGER | read-only | The available ingress cell rate. The cell rate is measured in Cells/Second. The ingress direction means the direction of inwards traffic flow into the interface. A value of -1 indicates that the field is not used. Common Name: Available Ingress Cell Rate |
| INT adnTdpIfAvailConnEgress | 1.3.6.1.4.1.637.3.1.5.22.2.1.12 | INTEGER | read-only | The number of available Tag Distribution Protocol (TDP) egress connections. The egress direction means the direction of outwards traffic flow from the interface. Common Name: Available Egress Connections |
| INT adnTdpIfAvailConnIn | 1.3.6.1.4.1.637.3.1.5.22.2.1.13 | INTEGER | read-only | The number of available Tag Distribution Protocol (TDP) ingress connections. The ingress direction means the direction of inwards traffic flow into the interface. Common Name: Available Ingress Connections |
| adnTdpIfEntry | 1.3.6.1.4.1.637.3.1.5.22.2.1 | not-accessible | An entry in the TDP interface table. There is one entry per TDP interface. | |
| NUM adnTdpIfIndex | 1.3.6.1.4.1.637.3.1.5.22.3.1.1 | InterfaceIndex | read-only | The ATM logical interface ifIndex corresponding to the given logical interface number. This ifIndex is the index of the adnTdpIfTable. Common Name: IfIndex |
| NUM adnTdpIfIuniIfIndex | 1.3.6.1.4.1.637.3.1.5.22.2.1.8 | InterfaceIndex | read-only | The ifIndex of the internal UNI (I-UNI) on the Cell Interconnection Gateway (CIG) associated with this TDP interface. An internal UNI is used for the CVSI connection between the Tag Switch Controller (TSC) and HSS. It is zero if this is not a TSC interface (i.e if adnTdpIfType is not equal to 'tsc'). Common Name: IUNI IfIndex |
| INT adnTdpIfLogicalNum | 1.3.6.1.4.1.637.3.1.5.22.2.1.1 | INTEGER | read-only | This is the logical interface number of this TDP interface used by the Tag Switch Controller (TSC). Common Name: Logical If Number |
| adnTdpIfLookupEntry | 1.3.6.1.4.1.637.3.1.5.22.3.1 | not-accessible | An entry in the TDP Interface lookup Table. There is one entry per TDP interface. | |
| adnTdpIfLookupTable | 1.3.6.1.4.1.637.3.1.5.22.3 | not-accessible | This table is a lookup table where a CVSI logical interface number is mapped to the corresponding ATM logical interface ifIndex. The ATM logical interface ifIndex is the index of the adnTdpIfTable. | |
| INT adnTdpIfMaxCdvEgress | 1.3.6.1.4.1.637.3.1.5.22.2.1.20 | INTEGER | read-only | The maximum Cell Delay Variation (CDV) for egress. This value is configured when an interface is created. The egress direction means the direction of outwards traffic flow from the interface. A value of -1 indicates that the field is not used. Common Name: Max Egress CDV |
| INT adnTdpIfMaxCdvIn | 1.3.6.1.4.1.637.3.1.5.22.2.1.21 | INTEGER | read-only | The maximum Cell Delay Variation (CDV) for ingress. This value is configured when an interface is created. The ingress direction means the direction of inwards traffic flow into the interface. A value of -1 indicates that the field is not used. Common Name: Max Ingress CDV |
| INT adnTdpIfMaxCellRateEgress | 1.3.6.1.4.1.637.3.1.5.22.2.1.14 | INTEGER | read-only | The maximum egress cell rate available. The cell rate is measured in Cells/Second. This value is configured when an interface is created. The egress direction means the direction of outwards traffic flow from the interface. A value of -1 indicates that the field is not used. Common Name: Max Egress Cell Rate |
| INT adnTdpIfMaxCellRateIn | 1.3.6.1.4.1.637.3.1.5.22.2.1.15 | INTEGER | read-only | The maximum ingress cell rate available. The cell rate is measured in Cells/Second. This value is configured when an interface is created. The ingress direction means the direction of inwards traffic flow into the interface. A value of -1 indicates that the field is not used. Common Name: Max Ingress Cell Rate |
| INT adnTdpIfMaxCtdEgress | 1.3.6.1.4.1.637.3.1.5.22.2.1.18 | INTEGER | read-only | The maximum Cell Transfer Delay (CTD) for egress. This value is configured when an interface is created. The egress direction means the direction of outwards traffic flow from the interface. A value of -1 indicates that the field is not used. Common Name: Max Egress CTD |
| INT adnTdpIfMaxCtdIn | 1.3.6.1.4.1.637.3.1.5.22.2.1.19 | INTEGER | read-only | The maximum Cell Transfer Delay (CTD) for ingress. This value is configured when an interface is created. The ingress direction means the direction of inwards traffic flow into the interface. A value of -1 indicates that the field is not used. Common Name: Max Ingress CTD |
| INT adnTdpIfMaxTDPConn | 1.3.6.1.4.1.637.3.1.5.22.2.1.11 | INTEGER | read-only | The maximum number of Tag Distribution protocol (TDP) connections allowed on this interface. Common Name: Max Connections |
| INT adnTdpIfPCR | 1.3.6.1.4.1.637.3.1.5.22.2.1.25 | INTEGER | read-only | The Peak Cell Rate (PCR) allowed for traffic through this interface. This rate is specified in cells per second. Common Name: PCR |
| STR adnTdpIfPhyDesc | 1.3.6.1.4.1.637.3.1.5.22.2.1.2 | DisplayString | read-only | The description of the interface. It is the 20 byte physical descriptor of the interface provided to the Tag Switch Controller (TSC). Common Name: Interface Physical Desc |
| NUM adnTdpIfPhyIfIndex | 1.3.6.1.4.1.637.3.1.5.22.2.1.6 | InterfaceIndex | read-only | The ifIndex of the physical line supporting this TDP interface. Common Name: Physical IfIndex |
| INT adnTdpIfPhyVpi | 1.3.6.1.4.1.637.3.1.5.22.2.1.7 | INTEGER | read-only | The Virtual Path Identifier (VPI) associated with the physical line supporting this TDP interface. Common Name: Physical VPI |
| ADN adnTdpIfPolicingState | 1.3.6.1.4.1.637.3.1.5.22.2.1.24 | AdnEnableDisabled | read-write | Indicates whether traffic policing is performed on this TDP interface. When policing is disabled then no traffic spacing will be done at the TDP interface no matter what the value of adnCvsiSpacingState is. Common Name: Policing |
| INT adnTdpIfRemNodeAreaNum | 1.3.6.1.4.1.637.3.1.5.22.2.1.28 | INTEGER | read-only | The area number part of adnTdpIfRemoteNodeId. |
| INT adnTdpIfRemNodeMacNum | 1.3.6.1.4.1.637.3.1.5.22.2.1.27 | INTEGER | read-only | The machine number part of adnTdpIfRemoteNodeId. |
| INT adnTdpIfRemoteLogicalNum | 1.3.6.1.4.1.637.3.1.5.22.2.1.22 | INTEGER | read-only | This entry represents the logical interface number of the remote side of the TDP trunk. This is the logical interface number of remote TDP interface used by the Tag Switch Controller (TSC). Common Name: Remote Logical Interface Number |
| ADN adnTdpIfRemoteNodeId | 1.3.6.1.4.1.637.3.1.5.22.2.1.23 | AdnRoutingID | read-only | This entry represents the node ID of the remote side HSS node of the TDP trunk. Common Name: Remote Node ID |
| INT adnTdpIfState | 1.3.6.1.4.1.637.3.1.5.22.2.1.4 | INTEGER | read-only | This object provides the state of the interface The following are the possible values it can hold: 1 - Interface Pending, the interface is being set up 2 - Interface Congested, the interface is congested 3 - Interface Opened, the interface is up 4 - Interface Up 5 - Interface Down Common Name: Interface State |
| adnTdpIfTable | 1.3.6.1.4.1.637.3.1.5.22.2 | not-accessible | This table describes the TDP Interface. This table contains proprietary TDP interface configuration parameters. There is one entry per TDP interface. A TDP interface is a logical inter-node ATM interface or an ATM interface Connected to the Tag Switch Controller (TSC). | |
| T/F adnTdpIfTrapSent | 1.3.6.1.4.1.637.3.1.5.22.2.1.5 | TruthValue | read-only | This object tells whether a trap has been sent to the Tag Switch controller The following are the possible values it can hold. A trap has to be sent when an interface is brought up or down, This object tells whether a trap has been sent after this event. The interface status transition will be based on the the TDP interface status (adnTdpIfState). Common Name: Trap Sent |
| INT adnTdpIfType | 1.3.6.1.4.1.637.3.1.5.22.2.1.3 | INTEGER | read-only | This object provides the type of the interface The following are the possible values it can hold: 1 - Tag switch controller (TSC) interface, it connects the HSS to the Tag Switch Controller (TSC). 2 - Tag distribution protocol (TDP) access interface, it connects HSS to the Tag Edge Router (TER). 3 - Tag distribution protocol (TDP) trunk interace, it is the trunk interface for the tagged data. Common Name: Interface Type |
| INT adnTdpIfVciMax | 1.3.6.1.4.1.637.3.1.5.22.2.1.9 | INTEGER | read-only | The maximum VCI value allowed on this interface. Common Name: Max VCI |
| INT adnTdpIfVciMin | 1.3.6.1.4.1.637.3.1.5.22.2.1.10 | INTEGER | read-only | The minimum VCI value allowed on this interface. Common Name: Min VCI |
| adnTelogyVs | 1.3.6.1.4.1.637.3.1.2.2.8.2 | |||
| INT adnTosIndex | 1.3.6.1.4.1.637.3.1.5.8.1.1.1 | INTEGER | not-accessible | Type of service: frame relay, ATM virtual channel, ATM virtual path, etc. |
| adnTp3000 | 1.3.6.1.4.1.637.3.1.2.1.4 | |||
| adnTp4800 | 1.3.6.1.4.1.637.3.1.2.1.3 | |||
| adnTp4900 | 1.3.6.1.4.1.637.3.1.2.1.1 | |||
| adnTp8000 | 1.3.6.1.4.1.637.3.1.2.1.2 | |||
| adnTpxAgent | 1.3.6.1.4.1.637.3.1.1.1 | |||
| adnTransmission | 1.3.6.1.4.1.637.3.1.4.10 | |||
| NTF adnTrapATMCellLossBeg | 1.3.6.1.4.1.637.3.1.6.3.0.9 | Indicates that cells are discarded because of FIFO overflow. | ||
| NTF adnTrapATMCellLossEnd | 1.3.6.1.4.1.637.3.1.6.3.0.10 | Indicates that the discard of cells has been stopped. | ||
| INT adnTrapCategory | 1.3.6.1.4.1.637.3.1.6.5.2 | INTEGER | not-accessible | For the trap currently being sent, category of the trap that occurs as a variable-binding of an SNMP trap PDU. |
| ADN adnTrapEnableCleared | 1.3.6.1.4.1.637.3.1.5.9.3.6 | AdnEnableDisabled | read-write | Indicates whether the SNMP agent is permitted to generate cleared traps. The value of this object provides a means whereby all cleared traps may be disabled. Common name: Trap Enable Cleared. |
| ADN adnTrapEnableCritical | 1.3.6.1.4.1.637.3.1.5.9.3.1 | AdnEnableDisabled | read-write | Indicates whether the SNMP agent is permitted to generate critical traps. The value of this object provides a means whereby all critical traps may be disabled. Common name: Send Critical Traps. |
| ADN adnTrapEnableDiagnostic | 1.3.6.1.4.1.637.3.1.5.9.3.5 | AdnEnableDisabled | read-write | Indicates whether the SNMP agent is permitted to generate diagnostic traps. The value of this object provides a means whereby all diagnostic traps may be disabled. Common name: Send Diagnostic Traps. |
| ADN adnTrapEnableMajor | 1.3.6.1.4.1.637.3.1.5.9.3.2 | AdnEnableDisabled | read-write | Indicates whether the SNMP agent is permitted to generate major traps. The value of this object provides a means whereby all major traps may be disabled. Common name: Send Major Traps. |
| ADN adnTrapEnableMinor | 1.3.6.1.4.1.637.3.1.5.9.3.3 | AdnEnableDisabled | read-write | Indicates whether the SNMP agent is permitted to generate minor traps. The value of this object provides a means whereby all minor traps may be disabled. Common name: Send Minor Traps. |
| ADN adnTrapEnableStr | 1.3.6.1.4.1.637.3.1.5.9.3.4 | AdnEnableDisabled | read-write | Indicates whether the SNMP agent is permitted to generate STR (Software Trouble Report) traps. The value of this object provides a means whereby all STR traps may be disabled. Common name: Send SW Trouble Traps. |
| INT adnTrapFrCongOrigin | 1.3.6.1.4.1.637.3.1.6.5.6 | INTEGER | not-accessible | Origin of the congestion trap. |
| ADN adnTrapFrCongsState | 1.3.6.1.4.1.637.3.1.6.5.4 | AdnCongestLevels | not-accessible | Current state of congestion for the affected channel or interface. |
| INT adnTrapFrIfType | 1.3.6.1.4.1.637.3.1.6.5.5 | INTEGER | not-accessible | Type of interface affected. |
| ADN adnTrapFrVCCos | 1.3.6.1.4.1.637.3.1.6.5.67 | AdnFrCos | not-accessible | Class of Service for Frame Relay. |
| INT adnTrapFrVCDLCIIndex | 1.3.6.1.4.1.637.3.1.6.5.3 | INTEGER | not-accessible | This object defines the index of the DLCI of the local end of the VC. |
| INT adnTrapReason | 1.3.6.1.4.1.637.3.1.6.5.7 | INTEGER | not-accessible | The reason for sending this trap (usually, the type of the cause object). atm-line: ATM line, fr-line: Frame Relay line, lis-link: Local Inchannel Signalling (LIS) link, lapf-lapd-link: LAPF/LAPD protocol, nms-initiated: NMS-initiated via SNMP SET command, atm-interface: ATM interface, xfr-line: Alcatel protocol for Frame Relay PSX trunk, xcm-link: Alcatel protocol for X.25 PSX trunk, x25-gateway: X.25 link to other (non ACX) X.25 network, x75-gateway: X.75 link to other X.25 network, x25-link: PSX-ACX trunk (ACX is an X.25 PSX subscriber). |
| adnTrapsATM | 1.3.6.1.4.1.637.3.1.6.3 | |||
| adnTrapsCommon | 1.3.6.1.4.1.637.3.1.6.1 | |||
| adnTrapsFrameRelay | 1.3.6.1.4.1.637.3.1.6.2 | |||
| NTF adnTrapSonetBeg | 1.3.6.1.4.1.637.3.1.6.3.0.4 | Indicates that a failure has appeared on the Sonet/SDH interface. | ||
| NTF adnTrapSonetEnd | 1.3.6.1.4.1.637.3.1.6.3.0.3 | Indicates that a failure has been cleared on the Sonet/SDH interface. | ||
| adnTrapsPsxAcx | 1.3.6.1.4.1.637.3.1.6.6 | |||
| adnTrapsTDM | 1.3.6.1.4.1.637.3.1.6.4 | |||
| adnTrapVars | 1.3.6.1.4.1.637.3.1.6.5 | |||
| INT adnUCNodeAdminCommand | 1.3.6.1.4.1.637.3.1.5.12.1.1 | INTEGER | read-write | The NMS sets a command value into this object,as follows: NULL No action to take place. install Places newly-transferred files in a read- only partition. activate HSS sends code/configuration to subsystems. commit HSS declares the activated code/ configuration to be in committed state. deactivate Changes the state of the HSS by reverting to the committed code and configuration. withdraw Deletes installed files. confirm-link Set by the NMS following receipt of successful Activate trap. qInstallActivate Places newly-transferred Quick configuration change files in a secured partition and sends configuration to subsytems. qDeactivateWithdraw Undoes Quick configuration changes and deletes installed files. qConfirmChange Confirms a Quick configuration change and sets it as an extension of the committed version. qRebaseline Install and commit a new set of configuration files to synchronize the NMS and HSS after several Quick transactions. Common Name: Administrative Command |
| INT adnUCNodeCodeFlashFlag | 1.3.6.1.4.1.637.3.1.5.12.1.22 | INTEGER | read-write | This object is used by a network operator to enable or disable the code downloading from coupler flash. The values are: disableFlash - code will be neither programmed in flash (either on-line or off-line) nor loaded from flash. offLineFlashOnly - only off-line flash update is allowed. Code can be loaded from flash. enableFlash - code can be programmed in flash (either on-line or off-line) and loaded from flash. |
| INT adnUCNodeConfigFlashFlag | 1.3.6.1.4.1.637.3.1.5.12.1.23 | INTEGER | read-write | This object is used by a network operator to enable or disable the configuration downloading from coupler flash. The values are: disableFlash - the configuration will be neither programmed in flash (either on-line or off-line) nor loaded from flash. offLineFlashOnly - only off-line flash update is allowed. The configuration can be loaded from flash. enableFlash - the configuration can be programmed in flash (either on-line or off-line) and loaded from flash. |
| INT adnUCNodeDebugCommand | 1.3.6.1.4.1.637.3.1.5.12.1.21 | INTEGER | read-write | This object is used by a network operator to enable the capture of configuration management trace information into an ASCII file, which may then be retrieved and analyzed off-line. Setting the value of this object to startTrace causes the HSS to begin saving the detailed trace of the Node Configuration Management Subsystem into the memory of the HSS Control Unit. Setting the value of this object to saveTrace causes the detailed trace of the Node Configuration Management Subsystem to be copied from HSS memory into a file stored on the HSS Control Unit disk, in /hss_pmd/.nmcm_detail_trace. The file is a snapshot of the current trace in memory. Its maximum size is 500,000 bytes. If a previous snapshot already existed in the directory /hss_pmd, then this old file is renamed to /hss_pmd/.old.nmcm_detail_trace. (A third trace file, .auto_nmcm_detail_trace, may also be present in the same directory. This contains a snapshot of the trace in memory that is saved to disk automatically in the event of an internally-detected error condition or version deactivation.) Setting the value of this object to stopTrace causes the HSS to stop saving the detailed trace into memory. NoCommand is the default value of this object, and has no effect on the node. |
| INT adnUCNodeDeliveryType | 1.3.6.1.4.1.637.3.1.5.12.1.20 | INTEGER | read-write | The type of delivery made by the NMS to the HSS. SingleReplacement means that the entire software version for the HSS is being delivered, and should replace unconditionally whatever is the current software version running at the HSS. SingleModification means that the delivery from the NMS may be full or partial, and that the HSS will detect which files have changed between the current HSS software version and the new delivery. For both singleReplacement and singleModification, there is just one single delivery tar file from the NMS, not multiple tar files. |
| INT adnUCNodeErrorChassis | 1.3.6.1.4.1.637.3.1.5.12.1.10 | INTEGER | read-only | This object identifies the chassis for which the error occurred. |
| INT adnUCNodeErrorCode | 1.3.6.1.4.1.637.3.1.5.12.1.8 | INTEGER | read-only | This object identifies a specific error defined within a group. Its interpretation depends on the value of adnUCNodeErrorGroup. Common Name: Update Error Code |
| INT adnUCNodeErrorGroup | 1.3.6.1.4.1.637.3.1.5.12.1.7 | INTEGER | read-only | This object identifies the group in which this specific error code is defined. Typically, a group corresponds to one HSS software subsystem. Common Name: Update Error Group |
| INT adnUCNodeErrorIndex1 | 1.3.6.1.4.1.637.3.1.5.12.1.14 | INTEGER | read-only | This object identifies the first index value of the table instance for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). It is zero if it does not apply, or if it cannot be represented as an integer. |
| INT adnUCNodeErrorIndex2 | 1.3.6.1.4.1.637.3.1.5.12.1.15 | INTEGER | read-only | This object identifies the second index value of the table instance for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). It is zero if it does not apply, or if it cannot be represented as an integer. |
| INT adnUCNodeErrorIndex3 | 1.3.6.1.4.1.637.3.1.5.12.1.16 | INTEGER | read-only | This object identifies the third index value of the table instance for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). It is zero if it does not apply, or if it cannot be represented as an integer. |
| INT adnUCNodeErrorIndex4 | 1.3.6.1.4.1.637.3.1.5.12.1.17 | INTEGER | read-only | This object identifies the fourth index value of the table instance for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). It is zero if it does not apply, or if it cannot be represented as an integer. |
| INT adnUCNodeErrorNominator | 1.3.6.1.4.1.637.3.1.5.12.1.18 | INTEGER | read-only | This object identifies the nominator for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). |
| INT adnUCNodeErrorProc | 1.3.6.1.4.1.637.3.1.5.12.1.12 | INTEGER | read-only | This object identifies the processor for which the error occurred, in the case of software or firmware management errors (adnUCNodeErrorType = software). |
| adnUCNodeErrors | 1.3.6.1.4.1.637.3.1.9.1 | |||
| adnUCNodeErrorsAafd | 1.3.6.1.4.1.637.3.1.9.1.19 | |||
| adnUCNodeErrorsAafdACI2TFull | 1.3.6.1.4.1.637.3.1.9.1.19.8 | |||
| adnUCNodeErrorsAafdConfig | 1.3.6.1.4.1.637.3.1.9.1.19.4 | |||
| adnUCNodeErrorsAafdCtxFail | 1.3.6.1.4.1.637.3.1.9.1.19.7 | |||
| adnUCNodeErrorsAafdDoneError | 1.3.6.1.4.1.637.3.1.9.1.19.10 | |||
| adnUCNodeErrorsAafdFmtError | 1.3.6.1.4.1.637.3.1.9.1.19.3 | |||
| adnUCNodeErrorsAafdInconsState | 1.3.6.1.4.1.637.3.1.9.1.19.9 | |||
| adnUCNodeErrorsAafdInconsTran | 1.3.6.1.4.1.637.3.1.9.1.19.5 | |||
| adnUCNodeErrorsAafdMibError | 1.3.6.1.4.1.637.3.1.9.1.19.2 | |||
| adnUCNodeErrorsAafdMissingNominator | 1.3.6.1.4.1.637.3.1.9.1.19.1 | |||
| adnUCNodeErrorsAafdTimerFail | 1.3.6.1.4.1.637.3.1.9.1.19.6 | |||
| adnUCNodeErrorsAsig | 1.3.6.1.4.1.637.3.1.9.1.21 | |||
| adnUCNodeErrorsAsigAddrMaxNb | 1.3.6.1.4.1.637.3.1.9.1.21.7 | |||
| adnUCNodeErrorsAsigCDVTooLarge | 1.3.6.1.4.1.637.3.1.9.1.21.6 | |||
| adnUCNodeErrorsAsigMaxVccNb | 1.3.6.1.4.1.637.3.1.9.1.21.4 | |||
| adnUCNodeErrorsAsigMaxVpcNb | 1.3.6.1.4.1.637.3.1.9.1.21.5 | |||
| adnUCNodeErrorsAsigNMSRequest | 1.3.6.1.4.1.637.3.1.9.1.21.101 | |||
| adnUCNodeErrorsAsigNoBandwith | 1.3.6.1.4.1.637.3.1.9.1.21.3 | |||
| adnUCNodeErrorsAsigNoMemory | 1.3.6.1.4.1.637.3.1.9.1.21.103 | |||
| adnUCNodeErrorsAsigObjectMaxNb | 1.3.6.1.4.1.637.3.1.9.1.21.1 | |||
| adnUCNodeErrorsAsigSoftware | 1.3.6.1.4.1.637.3.1.9.1.21.102 | |||
| adnUCNodeErrorsAsigVpiVccMaxNb | 1.3.6.1.4.1.637.3.1.9.1.21.2 | |||
| adnUCNodeErrorsAtmces | 1.3.6.1.4.1.637.3.1.9.1.26 | |||
| adnUCNodeErrorsAtmcesAlrStruct | 1.3.6.1.4.1.637.3.1.9.1.26.122 | |||
| adnUCNodeErrorsAtmcesAlrUnstr | 1.3.6.1.4.1.637.3.1.9.1.26.104 | |||
| adnUCNodeErrorsAtmcesBadChannel | 1.3.6.1.4.1.637.3.1.9.1.26.115 | |||
| adnUCNodeErrorsAtmcesBadChassis | 1.3.6.1.4.1.637.3.1.9.1.26.112 | |||
| adnUCNodeErrorsAtmcesBadLine | 1.3.6.1.4.1.637.3.1.9.1.26.114 | |||
| adnUCNodeErrorsAtmcesBadLineType | 1.3.6.1.4.1.637.3.1.9.1.26.103 | |||
| adnUCNodeErrorsAtmcesBadSlot | 1.3.6.1.4.1.637.3.1.9.1.26.113 | |||
| adnUCNodeErrorsAtmcesBadTsNb | 1.3.6.1.4.1.637.3.1.9.1.26.101 | |||
| adnUCNodeErrorsAtmcesBundleEmpty | 1.3.6.1.4.1.637.3.1.9.1.26.111 | |||
| adnUCNodeErrorsAtmcesBundleNtCre | 1.3.6.1.4.1.637.3.1.9.1.26.106 | |||
| adnUCNodeErrorsAtmcesBundleNtDel | 1.3.6.1.4.1.637.3.1.9.1.26.116 | |||
| adnUCNodeErrorsAtmcesBundleNtEmp | 1.3.6.1.4.1.637.3.1.9.1.26.117 | |||
| adnUCNodeErrorsAtmcesBundleNtFnd | 1.3.6.1.4.1.637.3.1.9.1.26.108 | |||
| adnUCNodeErrorsAtmcesCnxNotDel | 1.3.6.1.4.1.637.3.1.9.1.26.118 | |||
| adnUCNodeErrorsAtmcesDelReason | 1.3.6.1.4.1.637.3.1.9.1.26.4 | |||
| adnUCNodeErrorsAtmcesIncParVal | 1.3.6.1.4.1.637.3.1.9.1.26.13 | |||
| adnUCNodeErrorsAtmcesIncTranId | 1.3.6.1.4.1.637.3.1.9.1.26.1 | |||
| adnUCNodeErrorsAtmcesIncTranType | 1.3.6.1.4.1.637.3.1.9.1.26.2 | |||
| adnUCNodeErrorsAtmcesLineNotCre | 1.3.6.1.4.1.637.3.1.9.1.26.102 | |||
| adnUCNodeErrorsAtmcesMissingPar | 1.3.6.1.4.1.637.3.1.9.1.26.14 | |||
| adnUCNodeErrorsAtmcesNoBundleCre | 1.3.6.1.4.1.637.3.1.9.1.26.123 | |||
| adnUCNodeErrorsAtmcesNoLineCre | 1.3.6.1.4.1.637.3.1.9.1.26.121 | |||
| adnUCNodeErrorsAtmcesNotLinePar | 1.3.6.1.4.1.637.3.1.9.1.26.100 | |||
| adnUCNodeErrorsAtmcesNotUpdPar | 1.3.6.1.4.1.637.3.1.9.1.26.12 | |||
| adnUCNodeErrorsAtmcesNtBundlePar | 1.3.6.1.4.1.637.3.1.9.1.26.110 | |||
| adnUCNodeErrorsAtmcesOtherAtmCnx | 1.3.6.1.4.1.637.3.1.9.1.26.124 | |||
| adnUCNodeErrorsAtmcesOtherLine | 1.3.6.1.4.1.637.3.1.9.1.26.107 | |||
| adnUCNodeErrorsAtmcesOtherTran | 1.3.6.1.4.1.637.3.1.9.1.26.3 | |||
| adnUCNodeErrorsAtmline | 1.3.6.1.4.1.637.3.1.9.1.18 | |||
| adnUCNodeErrorsAtmlineBoardNotCre | 1.3.6.1.4.1.637.3.1.9.1.18.20 | |||
| adnUCNodeErrorsAtmlineIfTabNotDel | 1.3.6.1.4.1.637.3.1.9.1.18.30 | |||
| adnUCNodeErrorsAtmlineIncApplType | 1.3.6.1.4.1.637.3.1.9.1.18.27 | |||
| adnUCNodeErrorsAtmlineIncBoardType | 1.3.6.1.4.1.637.3.1.9.1.18.22 | |||
| adnUCNodeErrorsAtmlineIncParVal | 1.3.6.1.4.1.637.3.1.9.1.18.13 | |||
| adnUCNodeErrorsAtmlineIncTranId | 1.3.6.1.4.1.637.3.1.9.1.18.1 | |||
| adnUCNodeErrorsAtmlineIncTranType | 1.3.6.1.4.1.637.3.1.9.1.18.2 | |||
| adnUCNodeErrorsAtmlineInOutSpeed | 1.3.6.1.4.1.637.3.1.9.1.18.151 | |||
| adnUCNodeErrorsAtmlineLineAlCre | 1.3.6.1.4.1.637.3.1.9.1.18.21 | |||
| adnUCNodeErrorsAtmlineLineNotCre | 1.3.6.1.4.1.637.3.1.9.1.18.24 | |||
| adnUCNodeErrorsAtmlineMissingPar | 1.3.6.1.4.1.637.3.1.9.1.18.14 | |||
| adnUCNodeErrorsAtmlineNoAtmIfap | 1.3.6.1.4.1.637.3.1.9.1.18.112 | |||
| adnUCNodeErrorsAtmlineNoLowIndex | 1.3.6.1.4.1.637.3.1.9.1.18.111 | |||
| adnUCNodeErrorsAtmlineNotAtmTcPar | 1.3.6.1.4.1.637.3.1.9.1.18.110 | |||
| adnUCNodeErrorsAtmlineNotCigPar | 1.3.6.1.4.1.637.3.1.9.1.18.100 | |||
| adnUCNodeErrorsAtmlineNotDs3E3Par | 1.3.6.1.4.1.637.3.1.9.1.18.120 | |||
| adnUCNodeErrorsAtmlineNotRs232Par | 1.3.6.1.4.1.637.3.1.9.1.18.150 | |||
| adnUCNodeErrorsAtmlineNotSonetPar | 1.3.6.1.4.1.637.3.1.9.1.18.140 | |||
| adnUCNodeErrorsAtmlineNotT1E1Par | 1.3.6.1.4.1.637.3.1.9.1.18.130 | |||
| adnUCNodeErrorsAtmlineNotUpdPar | 1.3.6.1.4.1.637.3.1.9.1.18.12 | |||
| adnUCNodeErrorsAtmlineSpareBoard | 1.3.6.1.4.1.637.3.1.9.1.18.23 | |||
| adnUCNodeErrorsAtmlineTimNcpLoop | 1.3.6.1.4.1.637.3.1.9.1.18.26 | |||
| adnUCNodeErrorsAtmlineTimNotSup | 1.3.6.1.4.1.637.3.1.9.1.18.25 | |||
| adnUCNodeErrorsAtmsup | 1.3.6.1.4.1.637.3.1.9.1.17 | |||
| adnUCNodeErrorsAtmsupDM | 1.3.6.1.4.1.637.3.1.9.1.17.8 | |||
| adnUCNodeErrorsAtmsupIncIndex | 1.3.6.1.4.1.637.3.1.9.1.17.3 | |||
| adnUCNodeErrorsAtmsupIncTranId | 1.3.6.1.4.1.637.3.1.9.1.17.1 | |||
| adnUCNodeErrorsAtmsupIncTranType | 1.3.6.1.4.1.637.3.1.9.1.17.2 | |||
| adnUCNodeErrorsAtmsupSta | 1.3.6.1.4.1.637.3.1.9.1.17.6 | |||
| adnUCNodeErrorsAtmsupValue | 1.3.6.1.4.1.637.3.1.9.1.17.11 | |||
| adnUCNodeErrorsFraSi | 1.3.6.1.4.1.637.3.1.9.1.10 | |||
| adnUCNodeErrorsFraSiAddr2Long | 1.3.6.1.4.1.637.3.1.9.1.10.7 | |||
| adnUCNodeErrorsFraSiBadType | 1.3.6.1.4.1.637.3.1.9.1.10.8 | |||
| adnUCNodeErrorsFraSiCreateFail | 1.3.6.1.4.1.637.3.1.9.1.10.258 | |||
| adnUCNodeErrorsFraSiGetTransFail | 1.3.6.1.4.1.637.3.1.9.1.10.260 | |||
| adnUCNodeErrorsFraSiIntfInternalErr | 1.3.6.1.4.1.637.3.1.9.1.10.269 | |||
| adnUCNodeErrorsFraSiLength2Big | 1.3.6.1.4.1.637.3.1.9.1.10.5 | |||
| adnUCNodeErrorsFraSiNoConfigUpdate | 1.3.6.1.4.1.637.3.1.9.1.10.304 | |||
| adnUCNodeErrorsFraSiNoMalloc | 1.3.6.1.4.1.637.3.1.9.1.10.6 | |||
| adnUCNodeErrorsFraSiUpdateFail | 1.3.6.1.4.1.637.3.1.9.1.10.266 | |||
| adnUCNodeErrorsFraSiUpdateWoCreate | 1.3.6.1.4.1.637.3.1.9.1.10.268 | |||
| adnUCNodeErrorsFrs | 1.3.6.1.4.1.637.3.1.9.1.5 | |||
| adnUCNodeErrorsFrsDelTransFail | 1.3.6.1.4.1.637.3.1.9.1.5.271 | |||
| adnUCNodeErrorsFrsFailLimit | 1.3.6.1.4.1.637.3.1.9.1.5.9 | |||
| adnUCNodeErrorsFrsFailList | 1.3.6.1.4.1.637.3.1.9.1.5.10 | |||
| adnUCNodeErrorsFrsFailScan | 1.3.6.1.4.1.637.3.1.9.1.5.19 | |||
| adnUCNodeErrorsFrsFailString | 1.3.6.1.4.1.637.3.1.9.1.5.11 | |||
| adnUCNodeErrorsFrsFrcInvalIndex | 1.3.6.1.4.1.637.3.1.9.1.5.1281 | |||
| adnUCNodeErrorsFrsFrcInvalTranType | 1.3.6.1.4.1.637.3.1.9.1.5.1041 | |||
| adnUCNodeErrorsFrsIntfAddMod | 1.3.6.1.4.1.637.3.1.9.1.5.270 | |||
| adnUCNodeErrorsFrsIntfDelFail | 1.3.6.1.4.1.637.3.1.9.1.5.266 | |||
| adnUCNodeErrorsFrsIntfDelWithVC | 1.3.6.1.4.1.637.3.1.9.1.5.264 | |||
| adnUCNodeErrorsFrsIntfFrsSWFail | 1.3.6.1.4.1.637.3.1.9.1.5.1536 | |||
| adnUCNodeErrorsFrsIntfInconsTran | 1.3.6.1.4.1.637.3.1.9.1.5.268 | |||
| adnUCNodeErrorsFrsIntfIntErr | 1.3.6.1.4.1.637.3.1.9.1.5.272 | |||
| adnUCNodeErrorsFrsIntfInvalTranType | 1.3.6.1.4.1.637.3.1.9.1.5.269 | |||
| adnUCNodeErrorsFrsIntfLlceFail | 1.3.6.1.4.1.637.3.1.9.1.5.267 | |||
| adnUCNodeErrorsFrsIntfNotCre | 1.3.6.1.4.1.637.3.1.9.1.5.258 | |||
| adnUCNodeErrorsFrsIntfNotIns | 1.3.6.1.4.1.637.3.1.9.1.5.259 | |||
| adnUCNodeErrorsFrsIntfNotUp | 1.3.6.1.4.1.637.3.1.9.1.5.1026 | |||
| adnUCNodeErrorsFrsIntfTransNotCre | 1.3.6.1.4.1.637.3.1.9.1.5.260 | |||
| adnUCNodeErrorsFrsInvalAddrLength | 1.3.6.1.4.1.637.3.1.9.1.5.7 | |||
| adnUCNodeErrorsFrsInvalLength | 1.3.6.1.4.1.637.3.1.9.1.5.5 | |||
| adnUCNodeErrorsFrsInvalType | 1.3.6.1.4.1.637.3.1.9.1.5.8 | |||
| adnUCNodeErrorsFrsInvIntfTranId | 1.3.6.1.4.1.637.3.1.9.1.5.257 | |||
| adnUCNodeErrorsFrsInvVCTranId | 1.3.6.1.4.1.637.3.1.9.1.5.1025 | |||
| adnUCNodeErrorsFrsNoDelete | 1.3.6.1.4.1.637.3.1.9.1.5.1 | |||
| adnUCNodeErrorsFrsNoMemFrcPath | 1.3.6.1.4.1.637.3.1.9.1.5.1282 | |||
| adnUCNodeErrorsFrsNoMemory | 1.3.6.1.4.1.637.3.1.9.1.5.6 | |||
| adnUCNodeErrorsFrsNotConfigPar | 1.3.6.1.4.1.637.3.1.9.1.5.2 | |||
| adnUCNodeErrorsFrsNotUpdPar | 1.3.6.1.4.1.637.3.1.9.1.5.20 | |||
| adnUCNodeErrorsFrsVCAddFail | 1.3.6.1.4.1.637.3.1.9.1.5.1033 | |||
| adnUCNodeErrorsFrsVCAddMod | 1.3.6.1.4.1.637.3.1.9.1.5.1038 | |||
| adnUCNodeErrorsFrsVCDelFail | 1.3.6.1.4.1.637.3.1.9.1.5.1032 | |||
| adnUCNodeErrorsFrsVCDelTransFail | 1.3.6.1.4.1.637.3.1.9.1.5.1039 | |||
| adnUCNodeErrorsFrsVCInconsTran | 1.3.6.1.4.1.637.3.1.9.1.5.513 | |||
| adnUCNodeErrorsFrsVCIntErr | 1.3.6.1.4.1.637.3.1.9.1.5.1040 | |||
| adnUCNodeErrorsFrsVCInvalTranType | 1.3.6.1.4.1.637.3.1.9.1.5.1037 | |||
| adnUCNodeErrorsFrsVCNotCre | 1.3.6.1.4.1.637.3.1.9.1.5.1027 | |||
| adnUCNodeErrorsFrsVCNotIns | 1.3.6.1.4.1.637.3.1.9.1.5.1028 | |||
| adnUCNodeErrorsFrsVCTransNotCre | 1.3.6.1.4.1.637.3.1.9.1.5.1029 | |||
| adnUCNodeErrorsIsna | 1.3.6.1.4.1.637.3.1.9.1.6 | |||
| adnUCNodeErrorsIsnaAddConfRangeErr1 | 1.3.6.1.4.1.637.3.1.9.1.6.1027 | |||
| adnUCNodeErrorsIsnaAddConfRangeErr2 | 1.3.6.1.4.1.637.3.1.9.1.6.1031 | |||
| adnUCNodeErrorsIsnaAddConfRefused1 | 1.3.6.1.4.1.637.3.1.9.1.6.1026 | |||
| adnUCNodeErrorsIsnaAddConfRefused2 | 1.3.6.1.4.1.637.3.1.9.1.6.1030 | |||
| adnUCNodeErrorsIsnaAddConfResourceUnavail1 | 1.3.6.1.4.1.637.3.1.9.1.6.1025 | |||
| adnUCNodeErrorsIsnaAddConfResourceUnavail2 | 1.3.6.1.4.1.637.3.1.9.1.6.1029 | |||
| adnUCNodeErrorsIsnaAddConfTableName1 | 1.3.6.1.4.1.637.3.1.9.1.6.1028 | |||
| adnUCNodeErrorsIsnaAddConfTableName2 | 1.3.6.1.4.1.637.3.1.9.1.6.1032 | |||
| adnUCNodeErrorsIsnaAddConnDelPend | 1.3.6.1.4.1.637.3.1.9.1.6.257 | |||
| adnUCNodeErrorsIsnaAddConnDelPendRoute | 1.3.6.1.4.1.637.3.1.9.1.6.518 | |||
| adnUCNodeErrorsIsnaAddIfindexRoute1 | 1.3.6.1.4.1.637.3.1.9.1.6.515 | |||
| adnUCNodeErrorsIsnaAddRouteNoSuchObj | 1.3.6.1.4.1.637.3.1.9.1.6.519 | |||
| adnUCNodeErrorsIsnaDelConfPend1 | 1.3.6.1.4.1.637.3.1.9.1.6.2307 | |||
| adnUCNodeErrorsIsnaDelDelPend2 | 1.3.6.1.4.1.637.3.1.9.1.6.2563 | |||
| adnUCNodeErrorsIsnaDelInvalid | 1.3.6.1.4.1.637.3.1.9.1.6.2305 | |||
| adnUCNodeErrorsIsnaDelInvTblName | 1.3.6.1.4.1.637.3.1.9.1.6.2306 | |||
| adnUCNodeErrorsIsnaDelRouteInvDlci | 1.3.6.1.4.1.637.3.1.9.1.6.2562 | |||
| adnUCNodeErrorsIsnaDelRouteInvIfindex | 1.3.6.1.4.1.637.3.1.9.1.6.2561 | |||
| adnUCNodeErrorsIsnaDelRouteInvIp1 | 1.3.6.1.4.1.637.3.1.9.1.6.2564 | |||
| adnUCNodeErrorsIsnaDelRouteInvIp2 | 1.3.6.1.4.1.637.3.1.9.1.6.2565 | |||
| adnUCNodeErrorsIsnaInvDlciIcRoute | 1.3.6.1.4.1.637.3.1.9.1.6.516 | |||
| adnUCNodeErrorsIsnaInvIpAdrIcRoute | 1.3.6.1.4.1.637.3.1.9.1.6.517 | |||
| adnUCNodeErrorsIsom | 1.3.6.1.4.1.637.3.1.9.1.7 | |||
| adnUCNodeErrorsIsomAddConfRangeErr1 | 1.3.6.1.4.1.637.3.1.9.1.7.1026 | |||
| adnUCNodeErrorsIsomAddConfRangeErr2 | 1.3.6.1.4.1.637.3.1.9.1.7.1030 | |||
| adnUCNodeErrorsIsomAddConfRefused1 | 1.3.6.1.4.1.637.3.1.9.1.7.1025 | |||
| adnUCNodeErrorsIsomAddConfRefused2 | 1.3.6.1.4.1.637.3.1.9.1.7.1029 | |||
| adnUCNodeErrorsIsomAddConfResourceUnavail1 | 1.3.6.1.4.1.637.3.1.9.1.7.1033 | |||
| adnUCNodeErrorsIsomAddConfResourceUnavail2 | 1.3.6.1.4.1.637.3.1.9.1.7.1034 | |||
| adnUCNodeErrorsIsomAddConfTableName1 | 1.3.6.1.4.1.637.3.1.9.1.7.1028 | |||
| adnUCNodeErrorsIsomAddConfTableName2 | 1.3.6.1.4.1.637.3.1.9.1.7.1032 | |||
| adnUCNodeErrorsIsomAddConnDelPend | 1.3.6.1.4.1.637.3.1.9.1.7.513 | |||
| adnUCNodeErrorsIsomAddConnDelPendTrp | 1.3.6.1.4.1.637.3.1.9.1.7.772 | |||
| adnUCNodeErrorsIsomAddIfindexTrp1 | 1.3.6.1.4.1.637.3.1.9.1.7.769 | |||
| adnUCNodeErrorsIsomAddIfindexTrp2 | 1.3.6.1.4.1.637.3.1.9.1.7.773 | |||
| adnUCNodeErrorsIsomAddLineDelPend | 1.3.6.1.4.1.637.3.1.9.1.7.257 | |||
| adnUCNodeErrorsIsomAddTrpNoSuchObj | 1.3.6.1.4.1.637.3.1.9.1.7.774 | |||
| adnUCNodeErrorsIsomDelConfPend1 | 1.3.6.1.4.1.637.3.1.9.1.7.2307 | |||
| adnUCNodeErrorsIsomDelDelPend2 | 1.3.6.1.4.1.637.3.1.9.1.7.2563 | |||
| adnUCNodeErrorsIsomDelInvalid | 1.3.6.1.4.1.637.3.1.9.1.7.2305 | |||
| adnUCNodeErrorsIsomDelInvTblName | 1.3.6.1.4.1.637.3.1.9.1.7.2306 | |||
| adnUCNodeErrorsIsomDelLineInvState | 1.3.6.1.4.1.637.3.1.9.1.7.2817 | |||
| adnUCNodeErrorsIsomDelTrapInvDlci | 1.3.6.1.4.1.637.3.1.9.1.7.2562 | |||
| adnUCNodeErrorsIsomDelTrapInvIfindex | 1.3.6.1.4.1.637.3.1.9.1.7.2561 | |||
| adnUCNodeErrorsIsomDelTrapInvIp1 | 1.3.6.1.4.1.637.3.1.9.1.7.2564 | |||
| adnUCNodeErrorsIsomDelTrapInvIp2 | 1.3.6.1.4.1.637.3.1.9.1.7.2565 | |||
| adnUCNodeErrorsIsomInvDlciIcTrp | 1.3.6.1.4.1.637.3.1.9.1.7.770 | |||
| adnUCNodeErrorsLdrFlip | 1.3.6.1.4.1.637.3.1.9.1.12 | |||
| adnUCNodeErrorsLdrFlipConfig | 1.3.6.1.4.1.637.3.1.9.1.12.5 | |||
| adnUCNodeErrorsLdrFlipCreateLcbFailed | 1.3.6.1.4.1.637.3.1.9.1.12.14 | |||
| adnUCNodeErrorsLdrFlipGeneral | 1.3.6.1.4.1.637.3.1.9.1.12.1 | |||
| adnUCNodeErrorsLdrFlipGet | 1.3.6.1.4.1.637.3.1.9.1.12.6 | |||
| adnUCNodeErrorsLdrFlipGetFirst | 1.3.6.1.4.1.637.3.1.9.1.12.7 | |||
| adnUCNodeErrorsLdrFlipGetNext | 1.3.6.1.4.1.637.3.1.9.1.12.8 | |||
| adnUCNodeErrorsLdrFlipGetTransFailed | 1.3.6.1.4.1.637.3.1.9.1.12.13 | |||
| adnUCNodeErrorsLdrFlipIfIndex | 1.3.6.1.4.1.637.3.1.9.1.12.2 | |||
| adnUCNodeErrorsLdrFlipSet | 1.3.6.1.4.1.637.3.1.9.1.12.9 | |||
| adnUCNodeErrorsLdrFlipTableFormat | 1.3.6.1.4.1.637.3.1.9.1.12.4 | |||
| adnUCNodeErrorsLdrFlipTest | 1.3.6.1.4.1.637.3.1.9.1.12.11 | |||
| adnUCNodeErrorsLdrFlipUpdate | 1.3.6.1.4.1.637.3.1.9.1.12.10 | |||
| adnUCNodeErrorsLdrFlipUpdateFailed | 1.3.6.1.4.1.637.3.1.9.1.12.12 | |||
| adnUCNodeErrorsLdrFlipValue | 1.3.6.1.4.1.637.3.1.9.1.12.3 | |||
| adnUCNodeErrorsLdrQuicc | 1.3.6.1.4.1.637.3.1.9.1.13 | |||
| adnUCNodeErrorsLdrQuiccConfig | 1.3.6.1.4.1.637.3.1.9.1.13.5 | |||
| adnUCNodeErrorsLdrQuiccGeneral | 1.3.6.1.4.1.637.3.1.9.1.13.1 | |||
| adnUCNodeErrorsLdrQuiccGet | 1.3.6.1.4.1.637.3.1.9.1.13.6 | |||
| adnUCNodeErrorsLdrQuiccGetFirst | 1.3.6.1.4.1.637.3.1.9.1.13.7 | |||
| adnUCNodeErrorsLdrQuiccGetNext | 1.3.6.1.4.1.637.3.1.9.1.13.8 | |||
| adnUCNodeErrorsLdrQuiccGetTransFailed | 1.3.6.1.4.1.637.3.1.9.1.13.14 | |||
| adnUCNodeErrorsLdrQuiccIfIndex | 1.3.6.1.4.1.637.3.1.9.1.13.2 | |||
| adnUCNodeErrorsLdrQuiccNoMoreRoomForIfIndex | 1.3.6.1.4.1.637.3.1.9.1.13.13 | |||
| adnUCNodeErrorsLdrQuiccSet | 1.3.6.1.4.1.637.3.1.9.1.13.9 | |||
| adnUCNodeErrorsLdrQuiccTableFormat | 1.3.6.1.4.1.637.3.1.9.1.13.4 | |||
| adnUCNodeErrorsLdrQuiccTest | 1.3.6.1.4.1.637.3.1.9.1.13.11 | |||
| adnUCNodeErrorsLdrQuiccUpdate | 1.3.6.1.4.1.637.3.1.9.1.13.10 | |||
| adnUCNodeErrorsLdrQuiccUpdateFailed | 1.3.6.1.4.1.637.3.1.9.1.13.12 | |||
| adnUCNodeErrorsLdrQuiccValue | 1.3.6.1.4.1.637.3.1.9.1.13.3 | |||
| adnUCNodeErrorsLdrSpyd | 1.3.6.1.4.1.637.3.1.9.1.14 | |||
| adnUCNodeErrorsLdrSpydConfig | 1.3.6.1.4.1.637.3.1.9.1.14.8 | |||
| adnUCNodeErrorsLdrSpydDownLoad | 1.3.6.1.4.1.637.3.1.9.1.14.5 | |||
| adnUCNodeErrorsLdrSpydFrac2 | 1.3.6.1.4.1.637.3.1.9.1.14.4 | |||
| adnUCNodeErrorsLdrSpydFracInvVal | 1.3.6.1.4.1.637.3.1.9.1.14.3 | |||
| adnUCNodeErrorsLdrSpydifAdmin | 1.3.6.1.4.1.637.3.1.9.1.14.7 | |||
| adnUCNodeErrorsLdrSpydInvVal | 1.3.6.1.4.1.637.3.1.9.1.14.2 | |||
| adnUCNodeErrorsLdrSpydNoCB | 1.3.6.1.4.1.637.3.1.9.1.14.6 | |||
| adnUCNodeErrorsLdrSpydNoMemory | 1.3.6.1.4.1.637.3.1.9.1.14.1 | |||
| adnUCNodeErrorsLdrSpydTransID | 1.3.6.1.4.1.637.3.1.9.1.14.9 | |||
| INT adnUCNodeErrorSlot | 1.3.6.1.4.1.637.3.1.5.12.1.11 | INTEGER | read-only | This object identifies the slot for which the error occurred. |
| adnUCNodeErrorsMsup | 1.3.6.1.4.1.637.3.1.9.1.16 | |||
| adnUCNodeErrorsMsupActionAlreadyProgress | 1.3.6.1.4.1.637.3.1.9.1.16.12 | |||
| adnUCNodeErrorsMsupBoardCrash | 1.3.6.1.4.1.637.3.1.9.1.16.4 | |||
| adnUCNodeErrorsMsupCu1NotConf | 1.3.6.1.4.1.637.3.1.9.1.16.6 | |||
| adnUCNodeErrorsMsupCu2NotConf | 1.3.6.1.4.1.637.3.1.9.1.16.7 | |||
| adnUCNodeErrorsMsupCuForbidSwitch | 1.3.6.1.4.1.637.3.1.9.1.16.20 | |||
| adnUCNodeErrorsMsupCuInWrongSlot | 1.3.6.1.4.1.637.3.1.9.1.16.8 | |||
| adnUCNodeErrorsMsupCUModif | 1.3.6.1.4.1.637.3.1.9.1.16.142 | |||
| adnUCNodeErrorsMsupCuNotSuspend | 1.3.6.1.4.1.637.3.1.9.1.16.11 | |||
| adnUCNodeErrorsMsupInconsCuTypes | 1.3.6.1.4.1.637.3.1.9.1.16.14 | |||
| adnUCNodeErrorsMsupInconsIndex | 1.3.6.1.4.1.637.3.1.9.1.16.2 | |||
| adnUCNodeErrorsMsupInconsState | 1.3.6.1.4.1.637.3.1.9.1.16.141 | |||
| adnUCNodeErrorsMsupInconsTran | 1.3.6.1.4.1.637.3.1.9.1.16.1 | |||
| adnUCNodeErrorsMsupISLBlock | 1.3.6.1.4.1.637.3.1.9.1.16.156 | |||
| adnUCNodeErrorsMsupISLReset | 1.3.6.1.4.1.637.3.1.9.1.16.158 | |||
| adnUCNodeErrorsMsupISLUnblock | 1.3.6.1.4.1.637.3.1.9.1.16.157 | |||
| adnUCNodeErrorsMsupMissingObject | 1.3.6.1.4.1.637.3.1.9.1.16.3 | |||
| adnUCNodeErrorsMsupNotCuSlot | 1.3.6.1.4.1.637.3.1.9.1.16.9 | |||
| adnUCNodeErrorsMsupProcCreation | 1.3.6.1.4.1.637.3.1.9.1.16.155 | |||
| adnUCNodeErrorsMsupSLLReq | 1.3.6.1.4.1.637.3.1.9.1.16.159 | |||
| adnUCNodeErrorsMsupSoftwareError | 1.3.6.1.4.1.637.3.1.9.1.16.10 | |||
| adnUCNodeErrorsMsupVersionChangeProgress | 1.3.6.1.4.1.637.3.1.9.1.16.13 | |||
| adnUCNodeErrorsMsupWrongAppl | 1.3.6.1.4.1.637.3.1.9.1.16.143 | |||
| adnUCNodeErrorsMsupWrongAseConf | 1.3.6.1.4.1.637.3.1.9.1.16.152 | |||
| adnUCNodeErrorsMsupWrongCu1ApplType | 1.3.6.1.4.1.637.3.1.9.1.16.17 | |||
| adnUCNodeErrorsMsupWrongCu1Type | 1.3.6.1.4.1.637.3.1.9.1.16.15 | |||
| adnUCNodeErrorsMsupWrongCu2ApplType | 1.3.6.1.4.1.637.3.1.9.1.16.18 | |||
| adnUCNodeErrorsMsupWrongCu2Type | 1.3.6.1.4.1.637.3.1.9.1.16.16 | |||
| adnUCNodeErrorsMsupWrongRedunOptions | 1.3.6.1.4.1.637.3.1.9.1.16.146 | |||
| adnUCNodeErrorsMsupWrongRedunRole | 1.3.6.1.4.1.637.3.1.9.1.16.145 | |||
| adnUCNodeErrorsMsupWrongServInd | 1.3.6.1.4.1.637.3.1.9.1.16.151 | |||
| adnUCNodeErrorsMsupWrongSyncConf | 1.3.6.1.4.1.637.3.1.9.1.16.19 | |||
| adnUCNodeErrorsNmgs | 1.3.6.1.4.1.637.3.1.9.1.2 | |||
| adnUCNodeErrorsNmgsActivateSm | 1.3.6.1.4.1.637.3.1.9.1.2.404 | |||
| adnUCNodeErrorsNmgsAllBrdConfDs | 1.3.6.1.4.1.637.3.1.9.1.2.242 | |||
| adnUCNodeErrorsNmgsAllCuConfDs | 1.3.6.1.4.1.637.3.1.9.1.2.233 | |||
| adnUCNodeErrorsNmgsAppCuCodeDs | 1.3.6.1.4.1.637.3.1.9.1.2.236 | |||
| adnUCNodeErrorsNmgsAppCuDataDs | 1.3.6.1.4.1.637.3.1.9.1.2.237 | |||
| adnUCNodeErrorsNmgsAppCuSwDs | 1.3.6.1.4.1.637.3.1.9.1.2.240 | |||
| adnUCNodeErrorsNmgsBadFwInd | 1.3.6.1.4.1.637.3.1.9.1.2.61 | |||
| adnUCNodeErrorsNmgsBadFwSll | 1.3.6.1.4.1.637.3.1.9.1.2.60 | |||
| adnUCNodeErrorsNmgsBadPfxiFile | 1.3.6.1.4.1.637.3.1.9.1.2.74 | |||
| adnUCNodeErrorsNmgsBadSwInd | 1.3.6.1.4.1.637.3.1.9.1.2.58 | |||
| adnUCNodeErrorsNmgsBkupBrdConfDs | 1.3.6.1.4.1.637.3.1.9.1.2.227 | |||
| adnUCNodeErrorsNmgsBkupBrdConfFl | 1.3.6.1.4.1.637.3.1.9.1.2.231 | |||
| adnUCNodeErrorsNmgsBkupCuCodeDs | 1.3.6.1.4.1.637.3.1.9.1.2.239 | |||
| adnUCNodeErrorsNmgsBkupCuCodeFl | 1.3.6.1.4.1.637.3.1.9.1.2.229 | |||
| adnUCNodeErrorsNmgsBkupCuConfFl | 1.3.6.1.4.1.637.3.1.9.1.2.230 | |||
| adnUCNodeErrorsNmgsBkupNeCuCodeDs | 1.3.6.1.4.1.637.3.1.9.1.2.225 | |||
| adnUCNodeErrorsNmgsBkupNeCuConfDs | 1.3.6.1.4.1.637.3.1.9.1.2.226 | |||
| adnUCNodeErrorsNmgsBkupPrCodeDs | 1.3.6.1.4.1.637.3.1.9.1.2.228 | |||
| adnUCNodeErrorsNmgsBkupPrCodeFl | 1.3.6.1.4.1.637.3.1.9.1.2.232 | |||
| adnUCNodeErrorsNmgsBoardStatus | 1.3.6.1.4.1.637.3.1.9.1.2.18 | |||
| adnUCNodeErrorsNmgsBrdConfig | 1.3.6.1.4.1.637.3.1.9.1.2.223 | |||
| adnUCNodeErrorsNmgsBrdSw | 1.3.6.1.4.1.637.3.1.9.1.2.221 | |||
| adnUCNodeErrorsNmgsCleanDir | 1.3.6.1.4.1.637.3.1.9.1.2.215 | |||
| adnUCNodeErrorsNmgsConfirmLinkTO | 1.3.6.1.4.1.637.3.1.9.1.2.451 | |||
| adnUCNodeErrorsNmgsControlBlock | 1.3.6.1.4.1.637.3.1.9.1.2.12 | |||
| adnUCNodeErrorsNmgsCopyError | 1.3.6.1.4.1.637.3.1.9.1.2.213 | |||
| adnUCNodeErrorsNmgsCuConfig | 1.3.6.1.4.1.637.3.1.9.1.2.222 | |||
| adnUCNodeErrorsNmgsCuSw | 1.3.6.1.4.1.637.3.1.9.1.2.220 | |||
| adnUCNodeErrorsNmgsDataSetError | 1.3.6.1.4.1.637.3.1.9.1.2.59 | |||
| adnUCNodeErrorsNmgsDeactivateCm | 1.3.6.1.4.1.637.3.1.9.1.2.409 | |||
| adnUCNodeErrorsNmgsDeclareSm | 1.3.6.1.4.1.637.3.1.9.1.2.400 | |||
| adnUCNodeErrorsNmgsDelcareCm | 1.3.6.1.4.1.637.3.1.9.1.2.402 | |||
| adnUCNodeErrorsNmgsDeleteBrd | 1.3.6.1.4.1.637.3.1.9.1.2.218 | |||
| adnUCNodeErrorsNmgsDupFwInv | 1.3.6.1.4.1.637.3.1.9.1.2.300 | |||
| adnUCNodeErrorsNmgsEventState | 1.3.6.1.4.1.637.3.1.9.1.2.30 | |||
| adnUCNodeErrorsNmgsFileError | 1.3.6.1.4.1.637.3.1.9.1.2.216 | |||
| adnUCNodeErrorsNmgsFwDs | 1.3.6.1.4.1.637.3.1.9.1.2.201 | |||
| adnUCNodeErrorsNmgsFwDupFile | 1.3.6.1.4.1.637.3.1.9.1.2.203 | |||
| adnUCNodeErrorsNmgsFwOpenFail | 1.3.6.1.4.1.637.3.1.9.1.2.204 | |||
| adnUCNodeErrorsNmgsFwSll | 1.3.6.1.4.1.637.3.1.9.1.2.202 | |||
| adnUCNodeErrorsNmgsGeneralError | 1.3.6.1.4.1.637.3.1.9.1.2.69 | |||
| adnUCNodeErrorsNmgsIacsSend | 1.3.6.1.4.1.637.3.1.9.1.2.73 | |||
| adnUCNodeErrorsNmgsInmpSend | 1.3.6.1.4.1.637.3.1.9.1.2.11 | |||
| adnUCNodeErrorsNmgsInstallDsError | 1.3.6.1.4.1.637.3.1.9.1.2.217 | |||
| adnUCNodeErrorsNmgsInstallSm | 1.3.6.1.4.1.637.3.1.9.1.2.401 | |||
| adnUCNodeErrorsNmgsInvalidEvent | 1.3.6.1.4.1.637.3.1.9.1.2.1 | |||
| adnUCNodeErrorsNmgsIsolateCm | 1.3.6.1.4.1.637.3.1.9.1.2.405 | |||
| adnUCNodeErrorsNmgsLoadFailed | 1.3.6.1.4.1.637.3.1.9.1.2.19 | |||
| adnUCNodeErrorsNmgsLocError | 1.3.6.1.4.1.637.3.1.9.1.2.72 | |||
| adnUCNodeErrorsNmgsLocNoSuchInstance | 1.3.6.1.4.1.637.3.1.9.1.2.70 | |||
| adnUCNodeErrorsNmgsLocNoSuchService | 1.3.6.1.4.1.637.3.1.9.1.2.71 | |||
| adnUCNodeErrorsNmgsLocQaFailed | 1.3.6.1.4.1.637.3.1.9.1.2.75 | |||
| adnUCNodeErrorsNmgsMajorVersionCm | 1.3.6.1.4.1.637.3.1.9.1.2.406 | |||
| adnUCNodeErrorsNmgsMergeDelta | 1.3.6.1.4.1.637.3.1.9.1.2.219 | |||
| adnUCNodeErrorsNmgsNmciMsgFail | 1.3.6.1.4.1.637.3.1.9.1.2.452 | |||
| adnUCNodeErrorsNmgsNoDelta | 1.3.6.1.4.1.637.3.1.9.1.2.16 | |||
| adnUCNodeErrorsNmgsNoDldCmdFile | 1.3.6.1.4.1.637.3.1.9.1.2.302 | |||
| adnUCNodeErrorsNmgsNoDownloadCmdFile | 1.3.6.1.4.1.637.3.1.9.1.2.54 | |||
| adnUCNodeErrorsNmgsNoFullConfig | 1.3.6.1.4.1.637.3.1.9.1.2.15 | |||
| adnUCNodeErrorsNmgsNoFwInv | 1.3.6.1.4.1.637.3.1.9.1.2.205 | |||
| adnUCNodeErrorsNmgsNoFwInvFile | 1.3.6.1.4.1.637.3.1.9.1.2.304 | |||
| adnUCNodeErrorsNmgsNoRollback | 1.3.6.1.4.1.637.3.1.9.1.2.17 | |||
| adnUCNodeErrorsNmgsNoSllFile | 1.3.6.1.4.1.637.3.1.9.1.2.350 | |||
| adnUCNodeErrorsNmgsNoSmiFileStatus | 1.3.6.1.4.1.637.3.1.9.1.2.57 | |||
| adnUCNodeErrorsNmgsNoSrliFile | 1.3.6.1.4.1.637.3.1.9.1.2.305 | |||
| adnUCNodeErrorsNmgsNotOnUptList | 1.3.6.1.4.1.637.3.1.9.1.2.301 | |||
| adnUCNodeErrorsNmgsNullInmpSend | 1.3.6.1.4.1.637.3.1.9.1.2.10 | |||
| adnUCNodeErrorsNmgsPfxiAccess | 1.3.6.1.4.1.637.3.1.9.1.2.13 | |||
| adnUCNodeErrorsNmgsProcDown | 1.3.6.1.4.1.637.3.1.9.1.2.62 | |||
| adnUCNodeErrorsNmgsProcNoSll | 1.3.6.1.4.1.637.3.1.9.1.2.52 | |||
| adnUCNodeErrorsNmgsProcResetRequest | 1.3.6.1.4.1.637.3.1.9.1.2.50 | |||
| adnUCNodeErrorsNmgsProcStatusRequest | 1.3.6.1.4.1.637.3.1.9.1.2.51 | |||
| adnUCNodeErrorsNmgsReplCuConfDs | 1.3.6.1.4.1.637.3.1.9.1.2.234 | |||
| adnUCNodeErrorsNmgsReplSfasMibDs | 1.3.6.1.4.1.637.3.1.9.1.2.235 | |||
| adnUCNodeErrorsNmgsScriptFail | 1.3.6.1.4.1.637.3.1.9.1.2.212 | |||
| adnUCNodeErrorsNmgsSendSll | 1.3.6.1.4.1.637.3.1.9.1.2.56 | |||
| adnUCNodeErrorsNmgsSfasMib | 1.3.6.1.4.1.637.3.1.9.1.2.224 | |||
| adnUCNodeErrorsNmgsSllOpen | 1.3.6.1.4.1.637.3.1.9.1.2.53 | |||
| adnUCNodeErrorsNmgsSoftwareError | 1.3.6.1.4.1.637.3.1.9.1.2.3 | |||
| adnUCNodeErrorsNmgsStatusRequest | 1.3.6.1.4.1.637.3.1.9.1.2.14 | |||
| adnUCNodeErrorsNmgsSuppressSm | 1.3.6.1.4.1.637.3.1.9.1.2.408 | |||
| adnUCNodeErrorsNmgsSysError | 1.3.6.1.4.1.637.3.1.9.1.2.214 | |||
| adnUCNodeErrorsNmgsTimeout | 1.3.6.1.4.1.637.3.1.9.1.2.31 | |||
| adnUCNodeErrorsNmgsTimingProblem | 1.3.6.1.4.1.637.3.1.9.1.2.2 | |||
| adnUCNodeErrorsNmgsTooLongSll | 1.3.6.1.4.1.637.3.1.9.1.2.4 | |||
| adnUCNodeErrorsNmgsTooManySwp | 1.3.6.1.4.1.637.3.1.9.1.2.303 | |||
| adnUCNodeErrorsNmgsTransList | 1.3.6.1.4.1.637.3.1.9.1.2.20 | |||
| adnUCNodeErrorsNmgsUncomAvail | 1.3.6.1.4.1.637.3.1.9.1.2.210 | |||
| adnUCNodeErrorsNmgsUncomRunning | 1.3.6.1.4.1.637.3.1.9.1.2.211 | |||
| adnUCNodeErrorsNmgsUndefFileInSll | 1.3.6.1.4.1.637.3.1.9.1.2.55 | |||
| adnUCNodeErrorsNmgsUnknownVsn | 1.3.6.1.4.1.637.3.1.9.1.2.450 | |||
| adnUCNodeErrorsNmgsUpdBrdConfDs | 1.3.6.1.4.1.637.3.1.9.1.2.241 | |||
| adnUCNodeErrorsNmgsValidateSm | 1.3.6.1.4.1.637.3.1.9.1.2.407 | |||
| adnUCNodeErrorsNmgsVerifySm | 1.3.6.1.4.1.637.3.1.9.1.2.403 | |||
| adnUCNodeErrorsNmgsWriteCuCodeDs | 1.3.6.1.4.1.637.3.1.9.1.2.238 | |||
| adnUCNodeErrorsPmd | 1.3.6.1.4.1.637.3.1.9.1.20 | |||
| adnUCNodeErrorsPmdConvIndex | 1.3.6.1.4.1.637.3.1.9.1.20.32 | |||
| adnUCNodeErrorsPmdDatagramSend | 1.3.6.1.4.1.637.3.1.9.1.20.6 | |||
| adnUCNodeErrorsPmdInconsIndex | 1.3.6.1.4.1.637.3.1.9.1.20.2 | |||
| adnUCNodeErrorsPmdInconsTran | 1.3.6.1.4.1.637.3.1.9.1.20.1 | |||
| adnUCNodeErrorsPmdMaxDefer | 1.3.6.1.4.1.637.3.1.9.1.20.35 | |||
| adnUCNodeErrorsSfas | 1.3.6.1.4.1.637.3.1.9.1.1 | |||
| adnUCNodeErrorsSfasInternalErr | 1.3.6.1.4.1.637.3.1.9.1.1.1 | |||
| INT adnUCNodeErrorStatus | 1.3.6.1.4.1.637.3.1.5.12.1.6 | INTEGER | read-only | This object notifies the NMS of the exact error detected by the HSS configuration management. For configuration table errors, this is the SNMP error code defined in RFC 1448. For software or firmware management errors, the value is genErr(5). Common Name: Update Error Status |
| OCT adnUCNodeErrorTableName | 1.3.6.1.4.1.637.3.1.5.12.1.13 | OCTET STRING | read-only | This object identifies the MIB table name for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). |
| INT adnUCNodeErrorType | 1.3.6.1.4.1.637.3.1.5.12.1.5 | INTEGER | read-only | This object notifies the NMS of the type of error detected by the HSS configuration management. no-err -- There is no error config -- Error occurred in configuration file management software -- Error occurred in firmware or software management. Common Name: Update Error Type |
| INT adnUCNodeExceptionCode | 1.3.6.1.4.1.637.3.1.5.12.1.9 | INTEGER | read-only | This object identifies an exception condition, if an error was detected during configuration table processing (adnUCNodeErrorType = config). Values may be zero (no exception), 0x80 (no such object) or 0x81 (no such instance). Common Name: Update Exception Code |
| adnUCNodeGroup | 1.3.6.1.4.1.637.3.1.5.12.1 | |||
| INT adnUCNodeOperCommand | 1.3.6.1.4.1.637.3.1.5.12.1.2 | INTEGER | read-only | This object indicates the current or last command accepted and processed by the HSS. Common Name: Oper Command |
| INT adnUCNodeOperStatus | 1.3.6.1.4.1.637.3.1.5.12.1.3 | INTEGER | read-only | This object notifies the NMS of the results of the last command, or if it is still in progress. Common Name: Oper Command Status |
| INT adnUCNodeState | 1.3.6.1.4.1.637.3.1.5.12.1.4 | INTEGER | read-only | This object notifies the NMS of the `state' of code/ configuration update processing. The values are: committed -- The node is running the committed software version. activateInProgress -- An Activate command is in progress. uncommitted -- The node is running the uncommitted software version. activateInProgressSuspended -- An Activate command is in progress. The processing of the Activate is suspended while the Control Unit board waits for a confirmation that any coupler boards that have been reset have gone down, before Activate processing continues. loadingCommittedSuspended -- The node is in the process of loading the committed software version, due to a Deactivate command or an automatic rollback. The processing of the deactivation is suspended while the Control Unit board waits for a confirmation that any coupler boards that have been reset have gone down, before deactivation processing continues. loadingCommitted -- The node is in the process of loading the committed software version, due to a Deactivate command or an automatic rollback. qConfirmed -- The node is running a confirmed Quick configuration change on top of the committed version. qActivateInProgress -- A Quick Install&Activate command is in progress. qUnconfirmed -- The node is running the unconfirmed Quick configuration. qLoadingConfirmed -- The node is in the process of loading the confirmed Quick configuration, due to a Quick Deactivate&Withdraw command or an automatic rollback. qRebaselineInProgress -- A Quick Rebaseline command is in progress. Common name: Update Control Status |
| INT adnUCNodeUncommittedAvail | 1.3.6.1.4.1.637.3.1.5.12.1.19 | INTEGER | read-only | This object indicates whether there is an uncommitted version installed. The values are: available -- There is a uncommitted version installed. unavailable -- There is no uncommitted version installed. Common Name: Uncommitted Version |
| adnUpdateCntl | 1.3.6.1.4.1.637.3.1.5.12.2 | |||
| adnUpdateCntlMIB | 1.3.6.1.4.1.637.3.1.5.12 | |||
| adnUtr | 1.3.6.1.4.1.637.3.1.2.2.9.3 | |||
| adnVerInfoGroup | 1.3.6.1.4.1.637.3.1.5.12.3 | |||
| adnVerInfoNodeGroup | 1.3.6.1.4.1.637.3.1.5.12.3.1 | |||
| adnVersion | 1.3.6.1.4.1.637.3.1.1 | |||
| adnViewEntry | 1.3.6.1.4.1.637.3.1.5.9.2.1.1 | not-accessible | An entry containing Customer Network Management (CNM) view information applicable to a particular context. | |
| INT adnViewIndex | 1.3.6.1.4.1.637.3.1.5.9.2.1.1.1 | INTEGER | read-write | If the value of an instance of this object is greater than zero, then this corresponding conceptual row in the contextTable refers to a Customer Network Management (CNM) view. The value of the instance identifies the particular CNM view which has the same value as the instance of the adnCnmIndex object. If the value of an instance of this object is zero, then there is no CNM view. |
| adnViewTable | 1.3.6.1.4.1.637.3.1.5.9.2.1 | not-accessible | The Customer Network Management (CNM) View table which contains an additional object for the Context table. | |
| CTR adnX3AISCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.2 | Counter | read-only | Duration of alarm indication signal (AIS). Counter #2 of the ATM core, only available on BBT3Bx, BBE3Bx and BBTP3C boards. |
| INT adnX3AisTest | 1.3.6.1.4.1.637.3.1.4.10.30.1.1.3 | INTEGER | read-write | This variable is used to send a constant alarm indication signal (AIS) to the remote equipment. This object is used only for testing and debugging. Common Name: Forcing a Line Alarm Indication Signal |
| CTR adnX3Bip8Counter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.11 | Counter | read-only | Number of 8-bits interleaved parity (BIP-8) errors. Counter #11 of the ATM core, only available on BBE3Bx boards and BBTP3C board with HATE3C applique. |
| INT adnX3CauseError | 1.3.6.1.4.1.637.3.1.6.5.9 | INTEGER | not-accessible | The cause of the DS3/E3 trap currently being sent. This variable occurs as a variable-binding of an SNMP Trap PDU. |
| CTR adnX3CBitCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.5 | Counter | read-only | Number of C-bit parity errors. Counter #5 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique. |
| CTR adnX3CBitFebeCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.6 | Counter | read-only | Number of C-bit far end block errors (FEBE). Counter #6 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique. |
| adnX3ConfigEntry | 1.3.6.1.4.1.637.3.1.4.10.30.1.1 | not-accessible | An entry in the DS3/E3 Configuration table extension. | |
| adnX3ConfigTable | 1.3.6.1.4.1.637.3.1.4.10.30.1 | not-accessible | This table is the extension of the dsx3ConfigTable described in the DS3/E3 standard MIB. | |
| adnX3CounterEntry | 1.3.6.1.4.1.637.3.1.4.10.30.2.1 | not-accessible | An entry in the DS3/E3 ADN Counter table. | |
| adnX3CounterTable | 1.3.6.1.4.1.637.3.1.4.10.30.2 | not-accessible | The DS3/E3 ADN Counter table. | |
| GAU adnX3CurrentBBEs | 1.3.6.1.4.1.637.3.1.4.10.30.3.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered during the current 15-minute interval. Common Name: Background Errored Blocks |
| adnX3CurrentEntry | 1.3.6.1.4.1.637.3.1.4.10.30.3.1 | not-accessible | An entry in the DS3/E3 Current table. | |
| GAU adnX3CurrentESs | 1.3.6.1.4.1.637.3.1.4.10.30.3.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered during the current 15-minute interval. Common Name: Errored Seconds |
| GAU adnX3CurrentFarEndBBEs | 1.3.6.1.4.1.637.3.1.4.10.30.3.1.6 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Background Errored Blocks |
| GAU adnX3CurrentFarEndESs | 1.3.6.1.4.1.637.3.1.4.10.30.3.1.4 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Errored Seconds |
| GAU adnX3CurrentFarEndSESs | 1.3.6.1.4.1.637.3.1.4.10.30.3.1.5 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Severely Errored Seconds |
| GAU adnX3CurrentSESs | 1.3.6.1.4.1.637.3.1.4.10.30.3.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered during the current 15-minute interval. Common Name: Severely Errored Seconds |
| adnX3CurrentTable | 1.3.6.1.4.1.637.3.1.4.10.30.3 | not-accessible | The DS3/E3 Current table. | |
| GAU adnX3CurrentUASs | 1.3.6.1.4.1.637.3.1.4.10.30.3.1.7 | Gauge | read-only | The number of unavailable seconds (UAS) encountered during the current 15-minute interval. Common Name: Unavailable Time |
| GAU adnX3DayBBEs | 1.3.6.1.4.1.637.3.1.4.10.30.5.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered during the current day (from 0 hours to the current time). |
| adnX3DayEntry | 1.3.6.1.4.1.637.3.1.4.10.30.5.1 | not-accessible | An entry in the DS3/E3 Day table. | |
| GAU adnX3DayESs | 1.3.6.1.4.1.637.3.1.4.10.30.5.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered during the current day (from 0 hours to the current time). |
| GAU adnX3DayFarEndBBEs | 1.3.6.1.4.1.637.3.1.4.10.30.5.1.6 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| GAU adnX3DayFarEndESs | 1.3.6.1.4.1.637.3.1.4.10.30.5.1.4 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| GAU adnX3DayFarEndSESs | 1.3.6.1.4.1.637.3.1.4.10.30.5.1.5 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during the current day (from 0 hours to the current time). |
| GAU adnX3DaySESs | 1.3.6.1.4.1.637.3.1.4.10.30.5.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered during the current day (from 0 hours to the current time). |
| adnX3DayTable | 1.3.6.1.4.1.637.3.1.4.10.30.5 | not-accessible | The DS3/E3 Day table. | |
| GAU adnX3DayUASs | 1.3.6.1.4.1.637.3.1.4.10.30.5.1.7 | Gauge | read-only | Number of unavailable seconds (UAS) encountered during the current day (from 0 hours to the current time). |
| CTR adnX3DownwardsFIFOCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.16 | Counter | read-only | Number of downward (to remote equipment) cell buffer overflow events, only available on BBT3B and BBE3B boards. Counter #26 of the ATM core |
| NTF adnX3ErrorBeg | 1.3.6.1.4.1.637.3.1.6.3.0.2 | Indicates that a failure has appeared on the DS3/E3 interface. | ||
| NTF adnX3ErrorEnd | 1.3.6.1.4.1.637.3.1.6.3.0.1 | Indicates that a failure has been cleared on the DS3/E3 interface. | ||
| CTR adnX3FebeCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.9 | Counter | read-only | Number of far end block errors (FEBE). Counter #9 of the ATM core, only available on BBE3Bx boards and BBTP3C board with HATE3C applique. |
| CTR adnX3HBERCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.17 | Counter | read-only | Duration of high bit error rate (HBER). Counter #30 of the ATM core, only available on BBT3B board. |
| CTR adnX3HECCorrectedCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.13 | Counter | read-only | Number of cells corrected through Header Error Control (HEC) mechanisms. Counter #17 of the ATM core, only available on BBE3B board. |
| CTR adnX3HECUncorrectedCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.14 | Counter | read-only | Number of cells discarded through Header Error Control (HEC) mechanisms. Counter #18 of the ATM core, only available on BBT3B and BBE3B boards. |
| INT adnX3IdleCellFillingconfig | 1.3.6.1.4.1.637.3.1.4.10.30.1.1.5 | INTEGER | read-write | The type of cell rate decoupling (CRD) mode selected for the line: - unassigned cells, according to ATM Forum standard - idle cells, according to ITU standart. Common Name: Inserted Cell Type |
| CTR adnX3IdleCodeCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.18 | Counter | read-only | Duration of idle code reception. Counter #28 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique. |
| GAU adnX3IntervalBBEs | 1.3.6.1.4.1.637.3.1.4.10.30.4.1.4 | Gauge | read-only | Number of background errored blocks (BBE) encountered during a particular 15-minute interval. |
| adnX3IntervalEntry | 1.3.6.1.4.1.637.3.1.4.10.30.4.1 | not-accessible | An entry in the DS3/E3 Interval table. | |
| GAU adnX3IntervalESs | 1.3.6.1.4.1.637.3.1.4.10.30.4.1.2 | Gauge | read-only | Number of errored seconds (ES) encountered during a particular 15-minute interval. |
| GAU adnX3IntervalFarEndBBEs | 1.3.6.1.4.1.637.3.1.4.10.30.4.1.7 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during a particular 15-minute interval. |
| GAU adnX3IntervalFarEndESs | 1.3.6.1.4.1.637.3.1.4.10.30.4.1.5 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during a particular 15-minute interval. |
| GAU adnX3IntervalFarEndSESs | 1.3.6.1.4.1.637.3.1.4.10.30.4.1.6 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during a particular 15-minute interval. |
| INT adnX3IntervalNumber | 1.3.6.1.4.1.637.3.1.4.10.30.4.1.1 | INTEGER | read-only | A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| GAU adnX3IntervalSESs | 1.3.6.1.4.1.637.3.1.4.10.30.4.1.3 | Gauge | read-only | Number of severely errored seconds (SES) encountered during a particular 15-minute interval. |
| adnX3IntervalTable | 1.3.6.1.4.1.637.3.1.4.10.30.4 | not-accessible | The DS3/E3 Interval table. | |
| GAU adnX3IntervalUASs | 1.3.6.1.4.1.637.3.1.4.10.30.4.1.8 | Gauge | read-only | Number of unavailable seconds (UAS) encountered in a particular 15-minute interval. |
| CTR adnX3LCVCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.8 | Counter | read-only | Number of line code violations (LCV). Counter #21 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique. Common Name: Line Code Viol |
| INT adnX3LineHWStatus | 1.3.6.1.4.1.637.3.1.4.10.30.1.1.8 | INTEGER | read-only | This variable indicates the hardware status of a line. The given status value corresponds to the last test initiated by setting the nominator ifTestType with adnIfTest- TypeLineHW test identifier. If the result of the test, given by the nominator ifTestResult, is different than 'success' or 'failed', the given status value is not significant. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnX3LineHWNoDefect bit should be set only if no other bit is set. If the status is not significant, all the bits are reset. The bit positions are: (BBT3B, BBT3B2, BBT3B3, or BBT3B4 boards): 1 adnX3LineHWNoDefect 2 BGPHT chip failure 4 BGP45 chip failure on line side 8 DS3 PLPP chip failure on line side 16 Applique failure (BBE3B, or BBE3B3 boards): 1 adnX3LineHWNoDefect 2 BGPHT chip failure 4 not used 8 BGP43 chip failure on line side 16 MRT chip failure (BBTP3C board with HATT3C applique): 1 adnX3LineHWNoDefect 2 not used 4 not used 8 PM7346 chip failure on line side 16 applique failure (BBTP3C board with HATE3C applique): 1 adnX3LineHWNoDefect 2 not used 4 BGP45 chip failure on line side 8 PM7346 chip failure on line side 16 applique failure |
| INT adnX3LinePerfStatus | 1.3.6.1.4.1.637.3.1.4.10.30.1.1.7 | INTEGER | read-only | This variable indicates the performance status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple status simultaneously. The adnX3NoDefect bit should be set only if no other bit is set. The adnX3UnavailablePeriod indicates that the interface has entered an unavailable period. Each CrossingThreshold bit indicates that the corresponding performance counter has reached its threshold. The bit positions are: 1 adnX3NoDefect 2 adnX3UnavailablePeriod 4 adnX3CurrentCrossingThresholdESs 8 adnX3CurrentCrossingThresholdSESs 16 adnX3CurrentCrossingThresholdBBEs 32 adnX3CurrentCrossingThresholdFarEndESs 64 adnX3CurrentCrossingThresholdFarEndSESs 128 adnX3CurrentCrossingThresholdFarEndBBEs 256 adnX3CurrentCrossingThresholdUASs 512 adnX3DayCrossingThresholdESs 1024 adnX3DayCrossingThresholdSESs 2048 adnX3DayCrossingThresholdBBEs 4096 adnX3DayCrossingThresholdFarEndESs 8192 adnX3DayCrossingThresholdFarEndSESs 16384 adnX3DayCrossingThresholdFarEndBBEs 32768 adnX3DayCrossingThresholdUASs |
| INT adnX3LineStatus | 1.3.6.1.4.1.637.3.1.4.10.30.1.1.6 | INTEGER | read-only | This variable indicates the status of the line interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnX3NoAlarm bit should be set only if no other bit is set. The bit positions and their corresponding ATM core counter numbers # are: # Bit Value ------------------------------------------------------ . 1 adnX3NoAlarm . No alarm present 10 2 adnX3RcvRAIFailure . Receiving yellow/remote alarm (RAI) . indication . 4 adnX3reserved . Not used 2 8 adndsx3RcvAIS . Receiving alarm indication signals . (AIS) . 16 adnX3reserved . Not used 7 32 adnX3LOF . Receiving loss-of-frame (LOF) . signals 0 64 adnX3LOS . Receiving loss-of-signal (LOS) . 128 adnX3LoopbackState . Looping the received signal . 256 adnX3reserved . Not used 3 512 adnX3RcvFerfAlarm . Receiving Far End Receive Failures . (FERF) DS3 yellow alarm 4 1024 adnX3PbitError . P-bit parity error counter threshold . reached 5 2048 adnX3CbitError . C-bit parity error counter threshold . reached 6 4096 adnX3FEBEError . Far end block errors (FEBE) counter . threshold reached 9 8192 adnX3FEBEError -- obsolete -- . FEBE Physical Layer Convergence . Protocol (PLCP) counter threshold . reached 11 16384 adnX3BIP8Error -- obsolete -- . 8-bits interleaved parity (BIP-8) . counter threshold reached 12 32768 adnX3LOFPlcpError . LOF DS3 PLCP counter threshold . reached 16 65536 adnX3LOCDError . Loss-of-cell-delineation (LOCD) . counter threshold reached 17 131072 adnX3HECCorrected . Corrected Header Error Control (HEC) . counter threshold reached 18 262144 adnX3HECUncorrected . Uncorrected HEC counter threshold . reached 20 524288 adnX3OOFPlcpError -- obsolete -- . Out-of-frame (OOF) PLCP counter . threshold reached 21 1048576 adnX3LCVError -- obsolete -- . Line code violation (LCV) counter . threshold reached 22 2097152 adnX3UpwardsFIFO . Upwards cell buffer overflow 26 4194304 adnX3DownwardsFIFO -- obsolete -- . Downwards cell buffer overflow 28 8388608 adnX3IdleCode . Idle Code counter threshold reached 29 16777216 adnX3OOFError . OOF counter threshold reached 30 33554432 adnX3HBERError -- obsolete -- . High bit error rate (HBER) counter . threshold reached 31 67108864 adnX3ChangeMode . Change Mode counter threshold reached Common Name: Line Status |
| CTR adnX3LOCDCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.19 | Counter | read-only | Duration of loss-of-cell-delineation (LOCD). Counter #16 of the ATM core, only available on BBT3B and BBE3B boards. |
| CTR adnX3LOFCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.7 | Counter | read-only | Duration of loss-of-frame (LOF). Counter #7 of the ATM core, only available on BBT3Bx, BBE3Bx and BBTP3C boards. |
| CTR adnX3LOSCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.1 | Counter | read-only | Duration of loss-of-signal (LOS). Counter #0 of the ATM core, only available on BBT3Bx, BBE3Bx and BBTP3C boards. |
| CTR adnX3ModeChangeCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.20 | Counter | read-only | Duration of DS3 application mode change. Counter #31 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique. |
| INT adnX3MsferfTest | 1.3.6.1.4.1.637.3.1.4.10.30.1.1.1 | INTEGER | read-write | This variable is used to send a constant yellow alarm signal at the frame level to the remote equipment. This object is used only for testing and debugging. Common Name: Forcing a Line FERF Signal |
| CTR adnX3OOFCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.12 | Counter | read-only | Number of out-of-frame (OOF) errors. Counter #29 of the ATM core, only available on BBT3Bx, BBE3Bx and BBTP3C boards. |
| CTR adnX3PathferfCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.10 | Counter | read-only | Duration of far end received failure (FERF) received from the remote equipment at path level. FERF is also called remote alarm indication (RAI) or received yellow alarm. Counter #10 of the ATM core, only available on BBE3Bx boards and BBTP3C board with HATE3C applique. |
| INT adnX3PathferfTest | 1.3.6.1.4.1.637.3.1.4.10.30.1.1.2 | INTEGER | read-write | This variable is used to send a constant yellow alarm signal at the path level to the remote equipment. This object is used only for testing and debugging. Common Name: Forcing a Path FERF Signal |
| CTR adnX3PBitCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.4 | Counter | read-only | Number of P-bit parity errors. Counter #4 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique. |
| CTR adnX3PlcpLOFCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.21 | Counter | read-only | Duration of loss-of-frame (LOF) at the Physical Layer Convergence Protocol (PLCP) level. Counter #12 of the ATM core, only available on BBT3B board. |
| CTR adnX3PlcpOOFCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.22 | Counter | read-only | Number of out-of-frame (OOF) events at the Physical Layer Convergence Protocol (PLCP) level. Counter #20 of the ATM core, only available on BBT3B board. |
| INT adnX3Scramblerconfig | 1.3.6.1.4.1.637.3.1.4.10.30.1.1.4 | INTEGER | read-write | Defines if the DS3 Physical Layer Convergence Protocol (PLCP) scrambler is active or not. Common Name: D3 Scrambler |
| GAU adnX3TotalBBEs | 1.3.6.1.4.1.637.3.1.4.10.30.6.1.3 | Gauge | read-only | Number of background errored blocks (BBE) encountered during the 24-hour reporting period. It is the sum of BBE statistics for the 96 15-minute intervals. |
| adnX3TotalEntry | 1.3.6.1.4.1.637.3.1.4.10.30.6.1 | not-accessible | An entry in the DS3/E3 Total table. | |
| GAU adnX3TotalESs | 1.3.6.1.4.1.637.3.1.4.10.30.6.1.1 | Gauge | read-only | Number of errored seconds (ES) encountered during the 24-hour reporting period. It is the sum of ES statistics for the 96 15-minute intervals. |
| GAU adnX3TotalFarEndBBEs | 1.3.6.1.4.1.637.3.1.4.10.30.6.1.6 | Gauge | read-only | Number of background errored blocks (BBE) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End BBE statistics for the 96 15-minute intervals. |
| GAU adnX3TotalFarEndESs | 1.3.6.1.4.1.637.3.1.4.10.30.6.1.4 | Gauge | read-only | Number of errored seconds (ES) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End ES statistics for the 96 15-minute intervals. |
| GAU adnX3TotalFarEndSESs | 1.3.6.1.4.1.637.3.1.4.10.30.6.1.5 | Gauge | read-only | Number of severely errored seconds (SES) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End SES statistics for the 96 15-minute intervals. |
| GAU adnX3TotalSESs | 1.3.6.1.4.1.637.3.1.4.10.30.6.1.2 | Gauge | read-only | Number of severely errored seconds (SES) encountered during the 24-hour reporting period. It is the sum of SES statistics for the 96 15-minute intervals. |
| adnX3TotalTable | 1.3.6.1.4.1.637.3.1.4.10.30.6 | not-accessible | The DS3/E3 Total table. | |
| GAU adnX3TotalUASs | 1.3.6.1.4.1.637.3.1.4.10.30.6.1.7 | Gauge | read-only | Number of unavailable seconds (UAS) encountered during the 24-hour reporting period. It is the sum of UAS statistics for the 96 15-minute intervals. |
| CTR adnX3UpwardsFIFOCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.15 | Counter | read-only | Number of upward (from remote equipment) cell buffer overflow events, only available on BBT3B and BBE3B boards. Counter #22 of the ATM core |
| CTR adnX3YellowAlarmCounter | 1.3.6.1.4.1.637.3.1.4.10.30.2.1.3 | Counter | read-only | Duration of far end received failure (FERF) received from the remote equipment at DS3 level. FERF is also called remote alarm indication (RAI) or received yellow alarm. Counter #3 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique. |
| adnXP | 1.3.6.1.4.1.637.3.1.2.4.3 | |||
| alcatel | 1.3.6.1.4.1.637 |
RFC description
Manages Alcatel Data Networks equipment including system configuration, environment monitoring, and network interfaces across ATM, Frame Relay, and SONET technologies.
Start monitoring Ascom Timeplex ADN multiplexers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.