DASAN-DSL-MIB

All MIBs › DASAN-DSL-MIB

Organization: Dasan Co., Ltd.

Last Updated: 2001-04-19

Category: DASAN Networks, DSL / Broadband Access

Description: Monitors DSL line configuration, performance counters, and error statistics on Dasan access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-DSL-MIB?

DASAN-DSL-MIB is a Dasan (DASAN Zhone/DZS) proprietary MIB reporting module/port inventory and line quality for SDSL access equipment. Its module table records description, type, physical address, operational status, uptime, available memory, and port-numbering base, while a DSL-port table records description, type, ifIndex, admin/operational status, modem status, and line quality. As a hardware/performance-status MIB it lets an administrator confirm SDSL line quality and modem status per port. It is deployed on Dasan (DASAN Zhone/DZS) SDSL access equipment. Engineers can download the DASAN-DSL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-DSL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dasan (DASAN Zhone/DZS) SDSL access equipment

Monitoring Examples

An administrator checks portLineQuality alongside portModemStatus to diagnose a subscriber-facing SDSL port reporting throughput issues on Dasan access equipment.

What Can Be Monitored

SDSL port line quality and modem status

Imported Objects

From DASAN-SMI

dasanMgmt

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SLE-TC-MIB

SleControlRequestResultType
SleControlStatusType

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
PhysAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT agingTime	1.3.6.1.4.1.6296.9.3.1.4.2.1.3	INTEGER	read-only	Elapased time since last RX activity from this MAC-addressed host.
dasanDslMIB	1.3.6.1.4.1.6296.9.3			The MIB module to describe SDSL product.
dasanDslMIBObjects	1.3.6.1.4.1.6296.9.3.1
dasanDslMIBObjects2	1.3.6.1.4.1.6296.9.3.2
dsCpeNosAutoUpBase	1.3.6.1.4.1.6296.9.3.2.9.1.1
INT dsCpeNosAutoUpConfStatus	1.3.6.1.4.1.6296.9.3.2.9.1.1.1	INTEGER	read-only	Description.
dsCpeNosAutoUpControl	1.3.6.1.4.1.6296.9.3.2.9.1.2
INT dsCpeNosAutoUpControlConfStatus	1.3.6.1.4.1.6296.9.3.2.9.1.2.6	INTEGER	read-write	Description.
SLE dsCpeNosAutoUpControlReqResult	1.3.6.1.4.1.6296.9.3.2.9.1.2.5	SleControlRequestResultType	read-only	Description.
INT dsCpeNosAutoUpControlRequest	1.3.6.1.4.1.6296.9.3.2.9.1.2.1	INTEGER	read-write	Description.
SLE dsCpeNosAutoUpControlStatus	1.3.6.1.4.1.6296.9.3.2.9.1.2.2	SleControlStatusType	read-only	Description.
G32 dsCpeNosAutoUpControlTimer	1.3.6.1.4.1.6296.9.3.2.9.1.2.3	Gauge32	read-write	Description.
TIK dsCpeNosAutoUpControlTimeStamp	1.3.6.1.4.1.6296.9.3.2.9.1.2.4	TimeTicks	read-only	Description.
dsCpeNosAutoUpCtrl	1.3.6.1.4.1.6296.9.3.2.9.2
dsCpeNosAutoUpCtrlControl	1.3.6.1.4.1.6296.9.3.2.9.2.2
U32 dsCpeNosAutoUpCtrlControlFWSize	1.3.6.1.4.1.6296.9.3.2.9.2.2.10	Unsigned32	read-write	Description.
OCT dsCpeNosAutoUpCtrlControlHW	1.3.6.1.4.1.6296.9.3.2.9.2.2.7	OCTET STRING	read-write	Description.
OCT dsCpeNosAutoUpCtrlControlName	1.3.6.1.4.1.6296.9.3.2.9.2.2.6	OCTET STRING	read-write	Description.
OCT dsCpeNosAutoUpCtrlControlNewFW	1.3.6.1.4.1.6296.9.3.2.9.2.2.9	OCTET STRING	read-write	Description.
OCT dsCpeNosAutoUpCtrlControlOldFW	1.3.6.1.4.1.6296.9.3.2.9.2.2.8	OCTET STRING	read-write	Description.
SLE dsCpeNosAutoUpCtrlControlReqResult	1.3.6.1.4.1.6296.9.3.2.9.2.2.5	SleControlRequestResultType	read-only	Description.
INT dsCpeNosAutoUpCtrlControlRequest	1.3.6.1.4.1.6296.9.3.2.9.2.2.1	INTEGER	read-write	Description.
SLE dsCpeNosAutoUpCtrlControlStatus	1.3.6.1.4.1.6296.9.3.2.9.2.2.2	SleControlStatusType	read-only	Description.
G32 dsCpeNosAutoUpCtrlControlTimer	1.3.6.1.4.1.6296.9.3.2.9.2.2.3	Gauge32	read-write	Description.
TIK dsCpeNosAutoUpCtrlControlTimeStamp	1.3.6.1.4.1.6296.9.3.2.9.2.2.4	TimeTicks	read-only	Description.
dsCpeNosAutoUpCtrlEntry	1.3.6.1.4.1.6296.9.3.2.9.2.1.1		not-accessible	Description.
U32 dsCpeNosAutoUpCtrlFWSize	1.3.6.1.4.1.6296.9.3.2.9.2.1.1.5	Unsigned32	read-only	Description.
OCT dsCpeNosAutoUpCtrlHW	1.3.6.1.4.1.6296.9.3.2.9.2.1.1.2	OCTET STRING	read-only	Description.
OCT dsCpeNosAutoUpCtrlName	1.3.6.1.4.1.6296.9.3.2.9.2.1.1.1	OCTET STRING	read-only	Description.
OCT dsCpeNosAutoUpCtrlNewFW	1.3.6.1.4.1.6296.9.3.2.9.2.1.1.4	OCTET STRING	read-only	Description.
OCT dsCpeNosAutoUpCtrlOldFW	1.3.6.1.4.1.6296.9.3.2.9.2.1.1.3	OCTET STRING	read-only	Description.
dsCpeNosAutoUpCtrlTable	1.3.6.1.4.1.6296.9.3.2.9.2.1		not-accessible	Description.
dsCpeNosAutoUpInfo	1.3.6.1.4.1.6296.9.3.2.9.1
dsCpeNosAutoUpNos	1.3.6.1.4.1.6296.9.3.2.9.5
dsCpeNosAutoUpNosControl	1.3.6.1.4.1.6296.9.3.2.9.5.2
OCT dsCpeNosAutoUpNosControlDestName	1.3.6.1.4.1.6296.9.3.2.9.5.2.10	OCTET STRING	read-write	Description.
OCT dsCpeNosAutoUpNosControlPasswd	1.3.6.1.4.1.6296.9.3.2.9.5.2.8	OCTET STRING	read-write	Description.
SLE dsCpeNosAutoUpNosControlReqResult	1.3.6.1.4.1.6296.9.3.2.9.5.2.5	SleControlRequestResultType	read-only	Description.
INT dsCpeNosAutoUpNosControlRequest	1.3.6.1.4.1.6296.9.3.2.9.5.2.1	INTEGER	read-write	Description.
IP dsCpeNosAutoUpNosControlServerIP	1.3.6.1.4.1.6296.9.3.2.9.5.2.6	IpAddress	read-write	Description.
OCT dsCpeNosAutoUpNosControlSrcName	1.3.6.1.4.1.6296.9.3.2.9.5.2.9	OCTET STRING	read-write	Description.
SLE dsCpeNosAutoUpNosControlStatus	1.3.6.1.4.1.6296.9.3.2.9.5.2.2	SleControlStatusType	read-only	Description.
G32 dsCpeNosAutoUpNosControlTimer	1.3.6.1.4.1.6296.9.3.2.9.5.2.3	Gauge32	read-write	Description.
TIK dsCpeNosAutoUpNosControlTimeStamp	1.3.6.1.4.1.6296.9.3.2.9.5.2.4	TimeTicks	read-only	Description.
OCT dsCpeNosAutoUpNosControlUserID	1.3.6.1.4.1.6296.9.3.2.9.5.2.7	OCTET STRING	read-write	Description.
dsCpeNosAutoUpNosEntry	1.3.6.1.4.1.6296.9.3.2.9.5.1.1		not-accessible	Description.
OCT dsCpeNosAutoUpNosName	1.3.6.1.4.1.6296.9.3.2.9.5.1.1.1	OCTET STRING	read-only	Description.
I32 dsCpeNosAutoUpNosSize	1.3.6.1.4.1.6296.9.3.2.9.5.1.1.2	Integer32	read-only	Description.
dsCpeNosAutoUpNosTable	1.3.6.1.4.1.6296.9.3.2.9.5.1		not-accessible	Description.
dsCpeNosAutoUpPort	1.3.6.1.4.1.6296.9.3.2.9.4
dsCpeNosAutoUpPortControl	1.3.6.1.4.1.6296.9.3.2.9.4.2
I32 dsCpeNosAutoUpPortControlPortNum	1.3.6.1.4.1.6296.9.3.2.9.4.2.6	Integer32	read-write	Description.
SLE dsCpeNosAutoUpPortControlReqResult	1.3.6.1.4.1.6296.9.3.2.9.4.2.5	SleControlRequestResultType	read-only	Description.
INT dsCpeNosAutoUpPortControlRequest	1.3.6.1.4.1.6296.9.3.2.9.4.2.1	INTEGER	read-write	Description.
I32 dsCpeNosAutoUpPortControlRetry	1.3.6.1.4.1.6296.9.3.2.9.4.2.7	Integer32	read-write	Description.
SLE dsCpeNosAutoUpPortControlStatus	1.3.6.1.4.1.6296.9.3.2.9.4.2.2	SleControlStatusType	read-only	Description.
I32 dsCpeNosAutoUpPortControlTimeout	1.3.6.1.4.1.6296.9.3.2.9.4.2.8	Integer32	read-write	Description.
G32 dsCpeNosAutoUpPortControlTimer	1.3.6.1.4.1.6296.9.3.2.9.4.2.3	Gauge32	read-write	Description.
TIK dsCpeNosAutoUpPortControlTimeStamp	1.3.6.1.4.1.6296.9.3.2.9.4.2.4	TimeTicks	read-only	Description.
I32 dsCpeNosAutoUpPortCurrCtrl	1.3.6.1.4.1.6296.9.3.2.9.4.1.1.7	Integer32	read-only	Description.
I32 dsCpeNosAutoUpPortCurrSched	1.3.6.1.4.1.6296.9.3.2.9.4.1.1.6	Integer32	read-only	Description.
I32 dsCpeNosAutoUpPortCurrState	1.3.6.1.4.1.6296.9.3.2.9.4.1.1.5	Integer32	read-only	Description.
dsCpeNosAutoUpPortEntry	1.3.6.1.4.1.6296.9.3.2.9.4.1.1		not-accessible	Description.
I32 dsCpeNosAutoUpPortPortNum	1.3.6.1.4.1.6296.9.3.2.9.4.1.1.1	Integer32	read-only	Description.
I32 dsCpeNosAutoUpPortRetry	1.3.6.1.4.1.6296.9.3.2.9.4.1.1.2	Integer32	read-only	Description.
OCT dsCpeNosAutoUpPortSchedMap	1.3.6.1.4.1.6296.9.3.2.9.4.1.1.4	OCTET STRING	read-only	Description.
dsCpeNosAutoUpPortTable	1.3.6.1.4.1.6296.9.3.2.9.4.1		not-accessible	Description.
I32 dsCpeNosAutoUpPortTimeout	1.3.6.1.4.1.6296.9.3.2.9.4.1.1.3	Integer32	read-only	Description.
dsCpeNosAutoUpResultLog	1.3.6.1.4.1.6296.9.3.2.9.6
dsCpeNosAutoUpRLogControl	1.3.6.1.4.1.6296.9.3.2.9.6.2
OCT dsCpeNosAutoUpRLogControlDestName	1.3.6.1.4.1.6296.9.3.2.9.6.2.10	OCTET STRING	read-write	Description.
OCT dsCpeNosAutoUpRLogControlPasswd	1.3.6.1.4.1.6296.9.3.2.9.6.2.8	OCTET STRING	read-write	Description.
SLE dsCpeNosAutoUpRLogControlReqResult	1.3.6.1.4.1.6296.9.3.2.9.6.2.5	SleControlRequestResultType	read-only	Description.
INT dsCpeNosAutoUpRLogControlRequest	1.3.6.1.4.1.6296.9.3.2.9.6.2.1	INTEGER	read-write	Description.
IP dsCpeNosAutoUpRLogControlServerIP	1.3.6.1.4.1.6296.9.3.2.9.6.2.6	IpAddress	read-write	Description.
OCT dsCpeNosAutoUpRLogControlSrcName	1.3.6.1.4.1.6296.9.3.2.9.6.2.9	OCTET STRING	read-write	Description.
SLE dsCpeNosAutoUpRLogControlStatus	1.3.6.1.4.1.6296.9.3.2.9.6.2.2	SleControlStatusType	read-only	Description.
G32 dsCpeNosAutoUpRLogControlTimer	1.3.6.1.4.1.6296.9.3.2.9.6.2.3	Gauge32	read-write	Description.
TIK dsCpeNosAutoUpRLogControlTimeStamp	1.3.6.1.4.1.6296.9.3.2.9.6.2.4	TimeTicks	read-only	Description.
OCT dsCpeNosAutoUpRLogControlUserID	1.3.6.1.4.1.6296.9.3.2.9.6.2.7	OCTET STRING	read-write	Description.
dsCpeNosAutoUpRLogEntry	1.3.6.1.4.1.6296.9.3.2.9.6.1.1		not-accessible	Description.
OCT dsCpeNosAutoUpRLogName	1.3.6.1.4.1.6296.9.3.2.9.6.1.1.1	OCTET STRING	read-only	Description.
dsCpeNosAutoUpRLogTable	1.3.6.1.4.1.6296.9.3.2.9.6.1		not-accessible	Description.
OCT dsCpeNosAutoUpRLogValue	1.3.6.1.4.1.6296.9.3.2.9.6.1.1.2	OCTET STRING	read-only	Description.
dsCpeNosAutoUpSched	1.3.6.1.4.1.6296.9.3.2.9.3
dsCpeNosAutoUpSchedControl	1.3.6.1.4.1.6296.9.3.2.9.3.2
OCT dsCpeNosAutoUpSchedControlCtrlMap	1.3.6.1.4.1.6296.9.3.2.9.3.2.16	OCTET STRING	read-write	Description.
I32 dsCpeNosAutoupSchedControlDay	1.3.6.1.4.1.6296.9.3.2.9.3.2.12	Integer32	read-write	Description.
I32 dsCpeNosAutoUpSchedControlHour	1.3.6.1.4.1.6296.9.3.2.9.3.2.13	Integer32	read-write	Description.
I32 dsCpeNosAutoUpSchedControlInterval	1.3.6.1.4.1.6296.9.3.2.9.3.2.9	Integer32	read-write	Description.
I32 dsCpeNosAutoUpSchedControlMinute	1.3.6.1.4.1.6296.9.3.2.9.3.2.14	Integer32	read-write	Description.
I32 dsCpeNosAutoUpSchedControlMonth	1.3.6.1.4.1.6296.9.3.2.9.3.2.11	Integer32	read-write	Description.
OCT dsCpeNosAutoUpSchedControlName	1.3.6.1.4.1.6296.9.3.2.9.3.2.6	OCTET STRING	read-write	Description.
OCT dsCpeNosAutoUpSchedControlPortMap	1.3.6.1.4.1.6296.9.3.2.9.3.2.15	OCTET STRING	read-write	Description.
SLE dsCpeNosAutoUpSchedControlReqResult	1.3.6.1.4.1.6296.9.3.2.9.3.2.5	SleControlRequestResultType	read-only	Description.
INT dsCpeNosAutoUpSchedControlRequest	1.3.6.1.4.1.6296.9.3.2.9.3.2.1	INTEGER	read-write	Description.
I32 dsCpeNosAutoUpSchedControlSec	1.3.6.1.4.1.6296.9.3.2.9.3.2.8	Integer32	read-write	Description.
SLE dsCpeNosAutoUpSchedControlStatus	1.3.6.1.4.1.6296.9.3.2.9.3.2.2	SleControlStatusType	read-only	Description.
G32 dsCpeNosAutoUpSchedControlTimer	1.3.6.1.4.1.6296.9.3.2.9.3.2.3	Gauge32	read-write	Description.
TIK dsCpeNosAutoUpSchedControlTimeStamp	1.3.6.1.4.1.6296.9.3.2.9.3.2.4	TimeTicks	read-only	Description.
INT dsCpeNosAutoUpSchedControlType	1.3.6.1.4.1.6296.9.3.2.9.3.2.7	INTEGER	read-write	Description.
I32 dsCpeNosAutoUpSchedControlYear	1.3.6.1.4.1.6296.9.3.2.9.3.2.10	Integer32	read-write	Description.
dsCpeNosAutoUpSchedCount	1.3.6.1.4.1.6296.9.3.2.9.7
dsCpeNosAutoUpSchedCountControl	1.3.6.1.4.1.6296.9.3.2.9.7.2
I32 dsCpeNosAutoUpSchedCountControlPort	1.3.6.1.4.1.6296.9.3.2.9.7.2.6	Integer32	read-write	Description.
I32 dsCpeNosAutoUpSchedCountControlReqResult	1.3.6.1.4.1.6296.9.3.2.9.7.2.5	Integer32	read-write	Description.
INT dsCpeNosAutoUpSchedCountControlRequest	1.3.6.1.4.1.6296.9.3.2.9.7.2.1	INTEGER	read-write	Description.
I32 dsCpeNosAutoUpSchedCountControlStatus	1.3.6.1.4.1.6296.9.3.2.9.7.2.2	Integer32	read-only	Description.
G32 dsCpeNosAutoUpSchedCountControlTimer	1.3.6.1.4.1.6296.9.3.2.9.7.2.3	Gauge32	read-write	Description.
TIK dsCpeNosAutoUpSchedCountControlTimeStamp	1.3.6.1.4.1.6296.9.3.2.9.7.2.4	TimeTicks	read-only	Description.
dsCpeNosAutoUpSchedCountEntry	1.3.6.1.4.1.6296.9.3.2.9.7.1.1		not-accessible	Description.
I32 dsCpeNosAutoUpSchedCountFail	1.3.6.1.4.1.6296.9.3.2.9.7.1.1.3	Integer32	read-only	Description.
I32 dsCpeNosAutoUpSchedCountPort	1.3.6.1.4.1.6296.9.3.2.9.7.1.1.1	Integer32	read-only	Description.
I32 dsCpeNosAutoUpSchedCountSched	1.3.6.1.4.1.6296.9.3.2.9.7.1.1.2	Integer32	read-only	Description.
dsCpeNosAutoUpSchedCountTable	1.3.6.1.4.1.6296.9.3.2.9.7.1		not-accessible	Description.
I32 dsCpeNosAutoUpSchedCountTotal	1.3.6.1.4.1.6296.9.3.2.9.7.1.1.4	Integer32	read-only	Description.
OCT dsCpeNosAutoUpSchedCtrlMap	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.11	OCTET STRING	read-only	Description.
I32 dsCpeNosAutoUpSchedDay	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.7	Integer32	read-only	Description.
dsCpeNosAutoUpSchedEntry	1.3.6.1.4.1.6296.9.3.2.9.3.1.1		not-accessible	Description.
I32 dsCpeNosAutoUpSchedHour	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.8	Integer32	read-only	Description.
I32 dsCpeNosAutoUpSchedInterval	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.4	Integer32	read-only	Description.
I32 dsCpeNosAutoUpSchedMinute	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.9	Integer32	read-only	Description.
I32 dsCpeNosAutoUpSchedMonth	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.6	Integer32	read-only	Description.
OCT dsCpeNosAutoUpSchedName	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.1	OCTET STRING	read-only	Description.
OCT dsCpeNosAutoUpSchedPortMap	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.10	OCTET STRING	read-only	Description.
I32 dsCpeNosAutoUpSchedSec	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.3	Integer32	read-only	Description.
dsCpeNosAutoUpSchedTable	1.3.6.1.4.1.6296.9.3.2.9.3.1		not-accessible	Description.
INT dsCpeNosAutoUpSchedType	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.2	INTEGER	read-only	Description.
I32 dsCpeNosAutoUpSchedYear	1.3.6.1.4.1.6296.9.3.2.9.3.1.1.5	Integer32	read-only	Description.
dsDslLearnedMacs	1.3.6.1.4.1.6296.9.3.1.4
dsDslModules	1.3.6.1.4.1.6296.9.3.1.2
dsDslPortEntry	1.3.6.1.4.1.6296.9.3.1.3.2.1		not-accessible	An entry containing management information applicable to a particular port.
INT dsDslPortNumber	1.3.6.1.4.1.6296.9.3.1.3.1	INTEGER	read-only	The number of DSL modules (regardless of their current state) present on this system.
dsDslPorts	1.3.6.1.4.1.6296.9.3.1.3
dsDslPortTable	1.3.6.1.4.1.6296.9.3.1.3.2		not-accessible	A list of module entries. The number of entries is given by the value of moduleNumber.
dsDslSystem	1.3.6.1.4.1.6296.9.3.1.1
dsVdslCpeNosAutoUp	1.3.6.1.4.1.6296.9.3.2.9
dsVdslLine	1.3.6.1.4.1.6296.9.3.2.3
INT dsVdslLineCfgChannel	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.27	INTEGER	read-write	.
INT dsVdslLineCfgDownINP	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.21	INTEGER	read-write	Vdsl downstream INP .
U32 dsVdslLineCfgDownMaxDataRate	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.10	Unsigned32	read-create	Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derived from the sum of maximum downstream fast and slow channel data rates.
INT dsVdslLineCfgDownMaxInterDelay	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.16	INTEGER	read-create	Specifies the maximum interleave delay for the downstream slow channel.
U32 dsVdslLineCfgDownMaxSnrMgn	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.4	Unsigned32	read-create	Specifies the maximum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
U32 dsVdslLineCfgDownMinDataRate	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.11	Unsigned32	read-create	Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derived from the sum of minimum downstream fast and slow channel data rates.
U32 dsVdslLineCfgDownMinSnrMgn	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.5	Unsigned32	read-create	Specifies the minimum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
U32 dsVdslLineCfgDownTargetSnrMgn	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.6	Unsigned32	read-create	Specifies the target downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization.
C64 dsVdslLineCfgHamband	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.20	Counter64	read-write	dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000
INT dsVdslLineCfgLineProfile	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.29	INTEGER	read-write	sym25(1), asym50-3b(2), asym50-4b(3), asym70(4), asym100(5), sym100(6), 8a(8), 8b(9), 8c(10), 8d(11), 12a(12), 12b(13), 17a(14), 30a(15), 12a997(16), 12b997(17), v17a_8k(18)
INT dsVdslLineCfgOptionband	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.31	INTEGER	read-write	dsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4) Annex M
INT dsVdslLineCfgPBOLength	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.23	INTEGER	read-only	dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10)
dsVdslLineCfgProfile	1.3.6.1.4.1.6296.9.3.2.6.1
INT dsVdslLineCfgProfileAction	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.33	INTEGER	read-write	real set to profile parameter at the time. profile parameter is followings. dsVdslLineCfgStandard, dsVdslLineCfgLineProfile, dsVdslLineCfgToneDisableMode, dsVdslLineCfgOptionband.
dsVdslLineCfgProfileEntry	1.3.6.1.4.1.6296.9.3.2.6.1.1.1		not-accessible	Each entry consists of a list of parameters that represents the configuration of a VDSL line. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document.
STR dsVdslLineCfgProfileName	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.1	DisplayString	not-accessible	This object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document.
dsVdslLineCfgProfileTable	1.3.6.1.4.1.6296.9.3.2.6.1.1		not-accessible	This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the VDSL line. Entries in this table MUST be maintained in a persistent manner.
ROW dsVdslLineCfgProfRowStatus	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.100	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to 'destroy' or 'outOfService') it must be first unreferenced from all associated lines.
INT dsVdslLineCfgPSDMaskLevel	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.24	INTEGER	read-only	dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11)
INT dsVdslLineCfgStandard	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.28	INTEGER	read-write	VDSL Standard.
INT dsVdslLineCfgTCMAdmin	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.25	INTEGER	read-write	.
INT dsVdslLineCfgToneDisableMode	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.30	INTEGER	read-write	normal(1), isdn(2), adsl(3), adsl2(4), t-lan(5), adsl-safe(6)
INT dsVdslLineCfgUpboEnable	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.26	INTEGER	read-write	.
INT dsVdslLineCfgUpINP	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.22	INTEGER	read-write	Vdsl upstream INP.
U32 dsVdslLineCfgUpMaxDataRate	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.12	Unsigned32	read-create	Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second.
INT dsVdslLineCfgUpMaxInterDelay	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.17	INTEGER	read-create	Specifies the maximum interleave delay for the upstream slow channel.
U32 dsVdslLineCfgUpMaxSnrMgn	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.7	Unsigned32	read-create	Specifies the maximum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
U32 dsVdslLineCfgUpMinDataRate	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.13	Unsigned32	read-create	Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second.
U32 dsVdslLineCfgUpMinSnrMgn	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.8	Unsigned32	read-create	Specifies the minimum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
U32 dsVdslLineCfgUpTargetSnrMgn	1.3.6.1.4.1.6296.9.3.2.6.1.1.1.9	Unsigned32	read-create	Specifies the target upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization.
dsVdslLineConfig	1.3.6.1.4.1.6296.9.3.2.3.2
dsVdslLineConfigEntry	1.3.6.1.4.1.6296.9.3.2.3.2.1.1		not-accessible	Description.
INT dsVdslLineConfigMicroCutStatCleared	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.6	INTEGER	read-write	Description.
I32 dsVdslLineConfigMicroCutStatCurrent	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.4	Integer32	read-only	Description.
I32 dsVdslLineConfigMicroCutStatLinkdown	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.5	Integer32	read-only	Description.
I32 dsVdslLineConfigMicroCutStatTotal	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.3	Integer32	read-only	Description.
I32 dsVdslLineConfigMicroCutThreshold	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.2	Integer32	read-write	-1 means default threshold value.
dsVdslLineConfigTable	1.3.6.1.4.1.6296.9.3.2.3.2.1		not-accessible	Description.
INT dsVdslLineConfigTrustSnr	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.7	INTEGER	read-write	Description.
INT dsVdslLineConfigTrustSnrStatCleared	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.17	INTEGER	read-write	Description.
I32 dsVdslLineConfigTrustSnrStatDownRunning	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.14	Integer32	read-only	Description.
I32 dsVdslLineConfigTrustSnrStatDownTime	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.15	Integer32	read-only	Description.
I32 dsVdslLineConfigTrustSnrStatLinkdown	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.16	Integer32	read-only	Description.
I32 dsVdslLineConfigTrustSnrStatUpRunning	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.12	Integer32	read-only	Description.
I32 dsVdslLineConfigTrustSnrStatUpTime	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.13	Integer32	read-only	Description.
I32 dsVdslLineConfigTrustSnrThreshDownMargin	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.10	Integer32	read-write	-1 means default value
I32 dsVdslLineConfigTrustSnrThreshDownTime	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.11	Integer32	read-write	-1 means default value
I32 dsVdslLineConfigTrustSnrThreshUpMargin	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.8	Integer32	read-write	-1 means default value
I32 dsVdslLineConfigTrustSnrThreshUpTime	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.9	Integer32	read-write	-1 means default value
INT dsVdslLineConfMicroCut	1.3.6.1.4.1.6296.9.3.2.3.2.1.1.1	INTEGER	read-write	Description.
dsVdslLinePsdShaping	1.3.6.1.4.1.6296.9.3.2.3.1
I32 dsVdslLinePsdShapingDsEwlLength	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.23	Integer32	read-write	Description.
INT dsVdslLinePsdShapingDsEwlName	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.22	INTEGER	read-write	Description.
INT dsVdslLinePsdShapingDsFlag	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.21	INTEGER	read-write	Description.
I32 dsVdslLinePsdShapingDsFreqMax	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.25	Integer32	read-write	Description.
I32 dsVdslLinePsdShapingDsFreqMin	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.24	Integer32	read-write	Description.
dsVdslLinePsdShapingEntry	1.3.6.1.4.1.6296.9.3.2.3.1.1.1		not-accessible	Description.
dsVdslLinePsdShapingTable	1.3.6.1.4.1.6296.9.3.2.3.1.1		not-accessible	Description.
INT dsVdslLinePsdShapingUsAutoDr	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.6	INTEGER	read-write	Description.
INT dsVdslLinePsdShapingUsAutoStatus	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.5	INTEGER	read-write	Description.
INT dsVdslLinePsdShapingUsClearAutoDr	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.11	INTEGER	read-write	Description.
I32 dsVdslLinePsdShapingUsCurrentTryCount	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.7	Integer32	read-write	Description.
I32 dsVdslLinePsdShapingUsEwlLength	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.3	Integer32	read-write	Description.
INT dsVdslLinePsdShapingUsEwlName	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.2	INTEGER	read-write	Description.
I32 dsVdslLinePsdShapingUsEwlOnAutoDr	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.8	Integer32	read-write	Description.
INT dsVdslLinePsdShapingUsFlag	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.1	INTEGER	read-write	Description.
INT dsVdslLinePsdShapingUsMethodType	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.13	INTEGER	read-write	Description.
I32 dsVdslLinePsdShapingUsRetryCount	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.4	Integer32	read-write	Description.
I32 dsVdslLinePsdShapingUsStepCount	1.3.6.1.4.1.6296.9.3.2.3.1.1.1.14	Integer32	read-write	Description.
dsVdslLineStatus	1.3.6.1.4.1.6296.9.3.2.3.11
INT dsVdslLineStatusCpeLinkdownReason	1.3.6.1.4.1.6296.9.3.2.3.11.1.1.1	INTEGER	read-only	Description.
dsVdslLineStatusEntry	1.3.6.1.4.1.6296.9.3.2.3.11.1.1		not-accessible	Description.
dsVdslLineStatusTable	1.3.6.1.4.1.6296.9.3.2.3.11.1		not-accessible	Description.
dsVdslNotifications	1.3.6.1.4.1.6296.9.3.2.0
dsVdslObjectGroup	1.3.6.1.4.1.6296.9.3.2.20			Description.
dsVdslPM	1.3.6.1.4.1.6296.9.3.2.5
U32 dsVdslPM15minCorrBlk	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.5	Unsigned32	read-only	Description.
U32 dsVdslPM15minCRC	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.7	Unsigned32	read-only	Description.
U32 dsVdslPM15minCRCs	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.25	Unsigned32	read-only	Description.
G32 dsVdslPM15minElapsedTime	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.28	Gauge32	read-write	Description.
U32 dsVdslPM15minESs	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.22	Unsigned32	read-only	Description.
I32 dsVdslPM15minInterval	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.1	Integer32	not-accessible	Performance Data Interval number 1 is the most recent previous interval; interval 0 is current.
U32 dsVdslPM15minLof	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.3	Unsigned32	read-only	Description.
U32 dsVdslPM15minLofs	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.20	Unsigned32	read-only	Description.
U32 dsVdslPM15minLol	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.4	Unsigned32	read-only	Description.
U32 dsVdslPM15minLols	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.21	Unsigned32	read-only	Description.
U32 dsVdslPM15minLos	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.2	Unsigned32	read-only	Description.
U32 dsVdslPM15minLoss	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.19	Unsigned32	read-only	Description.
U32 dsVdslPM15minServiceError	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.8	Unsigned32	read-only	Description.
U32 dsVdslPM15minSESs	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.23	Unsigned32	read-only	Description.
U32 dsVdslPM15minUASs	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.24	Unsigned32	read-only	Description.
U32 dsVdslPM15minUnCorrBlk	1.3.6.1.4.1.6296.9.3.2.5.2.2.1.6	Unsigned32	read-only	Description.
U32 dsVdslPM1dayCorrBlk	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.5	Unsigned32	read-only	Description.
U32 dsVdslPM1dayCRC	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.7	Unsigned32	read-only	Description.
U32 dsVdslPM1dayCRCs	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.25	Unsigned32	read-only	Description.
G32 dsVdslPM1dayElapsedTime	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.29	Gauge32	read-write	Description.
U32 dsVdslPM1dayESs	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.22	Unsigned32	read-only	Description.
I32 dsVdslPM1dayInterval	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.1	Integer32	not-accessible	Performance Data Interval number 1 is the most recent previous interval; interval 0 is current.
U32 dsVdslPM1dayLof	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.3	Unsigned32	read-only	Description.
U32 dsVdslPM1dayLofs	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.20	Unsigned32	read-only	Description.
U32 dsVdslPM1dayLol	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.4	Unsigned32	read-only	Description.
U32 dsVdslPM1dayLols	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.21	Unsigned32	read-only	Description.
U32 dsVdslPM1dayLos	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.2	Unsigned32	read-only	Description.
U32 dsVdslPM1dayLoss	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.19	Unsigned32	read-only	Description.
U32 dsVdslPM1daySESs	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.23	Unsigned32	read-only	Description.
U32 dsVdslPM1dayUASs	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.24	Unsigned32	read-only	Description.
U32 dsVdslPM1dayUnCorrBlk	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.6	Unsigned32	read-only	Description.
INT dsVdslPMClear	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.30	INTEGER	read-write	clear all error statistic counter with timer.
U32 dsVdslPMCorrBlk	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.4	Unsigned32	read-write	Description.
dsVdslPMCoStat15minEntry	1.3.6.1.4.1.6296.9.3.2.5.2.2.1		not-accessible	Description.
dsVdslPMCoStat15minTable	1.3.6.1.4.1.6296.9.3.2.5.2.2		not-accessible	Description.
dsVdslPMCoStat1dayEntry	1.3.6.1.4.1.6296.9.3.2.5.2.3.1		not-accessible	Description.
dsVdslPMCoStat1dayTable	1.3.6.1.4.1.6296.9.3.2.5.2.3		not-accessible	Description.
dsVdslPMCoStatEntry	1.3.6.1.4.1.6296.9.3.2.5.2.1.1		not-accessible	Description.
dsVdslPMCoStatTable	1.3.6.1.4.1.6296.9.3.2.5.2.1		not-accessible	Description.
INT dsVdslPMCpeClear	1.3.6.1.4.1.6296.9.3.2.5.2.4.1.6	INTEGER	read-write	Description.
U32 dsVdslPMCpeCorrBlk	1.3.6.1.4.1.6296.9.3.2.5.2.4.1.3	Unsigned32	read-only	Description.
U32 dsVdslPMCpeCRC	1.3.6.1.4.1.6296.9.3.2.5.2.4.1.5	Unsigned32	read-only	Description.
U32 dsVdslPMCpeLof	1.3.6.1.4.1.6296.9.3.2.5.2.4.1.2	Unsigned32	read-only	Description.
U32 dsVdslPMCpeLos	1.3.6.1.4.1.6296.9.3.2.5.2.4.1.1	Unsigned32	read-only	Description.
dsVdslPMCpeStatEntry	1.3.6.1.4.1.6296.9.3.2.5.2.4.1		not-accessible	Description.
dsVdslPMCpeStatTable	1.3.6.1.4.1.6296.9.3.2.5.2.4		not-accessible	Description.
U32 dsVdslPMCpeUnCorrBlk	1.3.6.1.4.1.6296.9.3.2.5.2.4.1.4	Unsigned32	read-only	Description.
U32 dsVdslPMCRC	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.6	Unsigned32	read-write	Description.
U32 dsVdslPMCRCs	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.24	Unsigned32	read-write	Description.
U32 dsVdslPMdayServiceError	1.3.6.1.4.1.6296.9.3.2.5.2.3.1.8	Unsigned32	read-only	Description.
U32 dsVdslPMESs	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.21	Unsigned32	read-write	Description.
U32 dsVdslPMLof	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.2	Unsigned32	read-write	Description.
U32 dsVdslPMLofs	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.19	Unsigned32	read-write	Description.
U32 dsVdslPMLol	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.3	Unsigned32	read-write	Description.
U32 dsVdslPMLols	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.20	Unsigned32	read-write	Description.
U32 dsVdslPMLos	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.1	Unsigned32	read-write	The LOS total statistic value. set to 0 to clear count.
U32 dsVdslPMLoss	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.18	Unsigned32	read-write	Description.
TIK dsVdslPMMACleared	1.3.6.1.4.1.6296.9.3.2.5.1.1.1.7	TimeTicks	read-only	.
C64 dsVdslPMMAEnetCrcErrCnt	1.3.6.1.4.1.6296.9.3.2.5.1.1.1.6	Counter64	read-only	.
dsVdslPMMAEntry	1.3.6.1.4.1.6296.9.3.2.5.1.1.1		not-accessible	.
C64 dsVdslPMMARxCRCErr	1.3.6.1.4.1.6296.9.3.2.5.1.1.1.2	Counter64	read-only	.
C64 dsVdslPMMARxDrop	1.3.6.1.4.1.6296.9.3.2.5.1.1.1.3	Counter64	read-only	.
C64 dsVdslPMMARxFrameCount	1.3.6.1.4.1.6296.9.3.2.5.1.1.1.1	Counter64	read-only	.
dsVdslPMMATable	1.3.6.1.4.1.6296.9.3.2.5.1.1		not-accessible	.
C64 dsVdslPMMATxDrop	1.3.6.1.4.1.6296.9.3.2.5.1.1.1.5	Counter64	read-only	.
C64 dsVdslPMMATxFrameCount	1.3.6.1.4.1.6296.9.3.2.5.1.1.1.4	Counter64	read-only	.
dsVdslPMMediaAdaptor	1.3.6.1.4.1.6296.9.3.2.5.1
U32 dsVdslPMServiceError	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.7	Unsigned32	read-write	Description.
U32 dsVdslPMSESs	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.22	Unsigned32	read-write	Description.
dsVdslPMStatCount	1.3.6.1.4.1.6296.9.3.2.5.2
U32 dsVdslPMUASs	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.23	Unsigned32	read-write	Description.
U32 dsVdslPMUnCorrBlk	1.3.6.1.4.1.6296.9.3.2.5.2.1.1.5	Unsigned32	read-write	Description.
dsVdslProfile	1.3.6.1.4.1.6296.9.3.2.6
dsVdslStatus	1.3.6.1.4.1.6296.9.3.2.2
INT dsVdslStatusBAAction	1.3.6.1.4.1.6296.9.3.2.2.1.4	INTEGER	read-write	.
I32 dsVdslStatusBABitLoading	1.3.6.1.4.1.6296.9.3.2.2.1.7.1.2	Integer32	read-only	.
dsVdslStatusBAEntry	1.3.6.1.4.1.6296.9.3.2.2.1.7.1		not-accessible	.
I32 dsVdslStatusBAIfindex	1.3.6.1.4.1.6296.9.3.2.2.1.1	Integer32	read-write	.
OCT dsVdslStatusBALastTime	1.3.6.1.4.1.6296.9.3.2.2.1.6	OCTET STRING	read-only	.
INT dsVdslStatusBAPhySide	1.3.6.1.4.1.6296.9.3.2.2.1.2	INTEGER	read-write	.
INT dsVdslStatusBASectionIndex	1.3.6.1.4.1.6296.9.3.2.2.1.7.1.1	INTEGER	not-accessible	.
I32 dsVdslStatusBASectionSize	1.3.6.1.4.1.6296.9.3.2.2.1.3	Integer32	read-write	.
INT dsVdslStatusBAStatus	1.3.6.1.4.1.6296.9.3.2.2.1.5	INTEGER	read-only	.
dsVdslStatusBATable	1.3.6.1.4.1.6296.9.3.2.2.1.7		not-accessible	.
dsVdslStatusBitAlloc	1.3.6.1.4.1.6296.9.3.2.2.1
dsVdslSystemBaseInfo	1.3.6.1.4.1.6296.9.3.2.1
I32 dsVdslSystemBmeReset	1.3.6.1.4.1.6296.9.3.2.1.3	Integer32	read-write	select bme-number to reset
OCT dsVdslSystemFWVersion	1.3.6.1.4.1.6296.9.3.2.1.1	OCTET STRING	read-only	.
INT dsVdslSystemLowPowerMode	1.3.6.1.4.1.6296.9.3.2.1.2	INTEGER	read-write	.
OCT dsVdslSystemUpboConfArrayK1	1.3.6.1.4.1.6296.9.3.2.1.50.1.2	OCTET STRING	read-write	Description.
OCT dsVdslSystemUpboConfArrayK2	1.3.6.1.4.1.6296.9.3.2.1.50.1.3	OCTET STRING	read-write	Description.
dsVdslSystemUpboConfEntry	1.3.6.1.4.1.6296.9.3.2.1.50.1		not-accessible	Description.
INT dsVdslSystemUpboConfLength	1.3.6.1.4.1.6296.9.3.2.1.50.1.1	INTEGER	read-only	Description.
dsVdslSystemUpboConfTable	1.3.6.1.4.1.6296.9.3.2.1.50		not-accessible	Description.
PHY macAddress	1.3.6.1.4.1.6296.9.3.1.4.2.1.2	PhysAddress	read-only	MAC address learned on this port.
macEntry	1.3.6.1.4.1.6296.9.3.1.4.2.1		not-accessible	Each entry contains one MAC address and its aging time.
INT macIndex	1.3.6.1.4.1.6296.9.3.1.4.2.1.1	INTEGER	read-only	MAC table entry index.
INT macNumber	1.3.6.1.4.1.6296.9.3.1.4.1	INTEGER	read-only	The number of DSL modules (regardless of their current state) present on this system.
macTable	1.3.6.1.4.1.6296.9.3.1.4.2		not-accessible	A list of module entries. The number of entries is given by the value of moduleNumber.
INT moduleAvailableMemory	1.3.6.1.4.1.6296.9.3.1.2.3.1.7	INTEGER	read-only	The amount of free memory in this module.
STR moduleDescr	1.3.6.1.4.1.6296.9.3.1.2.3.1.2	DisplayString	read-only	A textual string containing information about the module. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
moduleEntry	1.3.6.1.4.1.6296.9.3.1.2.3.1		not-accessible	An entry containing management information applicable to a particular module.
INT moduleIndex	1.3.6.1.4.1.6296.9.3.1.2.3.1.1	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT moduleNumber	1.3.6.1.4.1.6296.9.3.1.2.1	INTEGER	read-only	The number of DSL modules (regardless of their current state) present on this system.
INT moduleOperStatus	1.3.6.1.4.1.6296.9.3.1.2.3.1.5	INTEGER	read-only	The current operational state of the module.
PHY modulePhysAddress	1.3.6.1.4.1.6296.9.3.1.2.3.1.4	PhysAddress	read-only	The module's address at its ethernet interface. For example, this object normally contains a MAC address.
INT modulePortIndexBase	1.3.6.1.4.1.6296.9.3.1.2.3.1.9	INTEGER	read-only	Port index base for this module. Port index range of this module is from modulePortIndexBase to (modulePortInexBase + modulePortNumber - 1).
INT modulePortNumber	1.3.6.1.4.1.6296.9.3.1.2.3.1.8	INTEGER	read-only	The number of ethernet ports and ethernet-like DSL ports (regardless of their current state) present on this module.
OID moduleSpecific	1.3.6.1.4.1.6296.9.3.1.2.3.1.10	OBJECT IDENTIFIER	read-only	A reference to MIB definitions specific to the particular media being used to realize the module. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1903. In fact, it is recommended that the module- specific MIB specify what value moduleSpecific should/can take for values of moduleType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }.
moduleTable	1.3.6.1.4.1.6296.9.3.1.2.3		not-accessible	A list of module entries. The number of entries is given by the value of moduleNumber.
TIK moduleTableLastChange	1.3.6.1.4.1.6296.9.3.1.2.2	TimeTicks	read-only	The value of sysUpTime at the time of the last creation or deletion of an entry in the moduleTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
STR moduleType	1.3.6.1.4.1.6296.9.3.1.2.3.1.3	DisplayString	read-only	The type of module. This string defines the type of DSL module type. For instance, this can be SDSL, VDSL or SDSL.
STR moduleUpTime	1.3.6.1.4.1.6296.9.3.1.2.3.1.6	DisplayString	read-only	Elasped time since this module has been boot up.
INT portAdminStatus	1.3.6.1.4.1.6296.9.3.1.3.2.1.5	INTEGER	read-only	The current administrative state of the port.
STR portDescr	1.3.6.1.4.1.6296.9.3.1.3.2.1.2	DisplayString	read-only	A textual string containing information about the port.
INT portDownStreamSpeed	1.3.6.1.4.1.6296.9.3.1.3.2.1.10	INTEGER	read-only	An estimate of the port's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.
INT portIfIndex	1.3.6.1.4.1.6296.9.3.1.3.2.1.4	INTEGER	read-only	ifIndex which is defined in interface mib.
INT portIndex	1.3.6.1.4.1.6296.9.3.1.3.2.1.1	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
STR portLastModemStatusChange	1.3.6.1.4.1.6296.9.3.1.3.2.1.11	DisplayString	read-only	Elasped time since modem status has been changed.
STR portLineQuality	1.3.6.1.4.1.6296.9.3.1.3.2.1.8	DisplayString	read-only	The ascii string which describes the quality of link. Description can be distinct for DSL link type.
INT portModemStatus	1.3.6.1.4.1.6296.9.3.1.3.2.1.7	INTEGER	read-write	idle : system does not try to establish modem link. trying : system is trying to establish modem link. established : modem link has been established. If trying is written, modem will be reset and the system will try to re-establish modem link. If idle is set, system will not manage modem connection. When established is written, it will be ignored silently.
INT portOperStatus	1.3.6.1.4.1.6296.9.3.1.3.2.1.6	INTEGER	read-only	The current operational state of the port.
OID portSpecific	1.3.6.1.4.1.6296.9.3.1.3.2.1.12	OBJECT IDENTIFIER	read-only	A reference to MIB definitions specific to the particular media being used to realize the module. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1903. In fact, it is recommended that the module- specific MIB specify what value moduleSpecific should/can take for values of moduleType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }.
STR portType	1.3.6.1.4.1.6296.9.3.1.3.2.1.3	DisplayString	read-only	The type of communication port. This string defines the type of port. Each module has one or more ethernet port(s) and xDSL ports.
INT portUpStreamSpeed	1.3.6.1.4.1.6296.9.3.1.3.2.1.9	INTEGER	read-only	An estimate of the port's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.

RFC description

Manages DASAN DSL/SDSL product configurations and DSL module status.

Start monitoring Dasan (DASAN Zhone/DZS) SDSL access equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-DSL-MIB

What Is DASAN-DSL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description