DASAN-GFAST-MIB

Description: Manages G.fast DSL line profile, vectoring, and performance monitoring on Dasan access nodes.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

DASAN-GFAST-MIB is a vendor MIB from DASAN Networks describing management of G.fast DSL access lines, per its module description "The MIB module to describe G-FAST." No sample objects were available in the supplied excerpt, so specific leaf names cannot be confirmed, but a G.fast MIB would typically be expected to expose per-line profile configuration, vectoring group membership, and performance counters such as attainable bit rate, SNR margin, and error counts. It would be used to monitor the hardware/line status of G.fast ports, revealing degraded line quality, vectoring faults, or a line failing to train to its expected rate. It directly depends on the ITU-T G.9700/G.9701 G.fast standard and likely complements generic DSL/xDSL line MIBs. It is deployed by broadband access providers using DASAN access nodes to deliver very-high-speed G.fast DSL service to subscribers. Engineers can download the DASAN-GFAST-MIB file directly to load it into their MIB browser.

No specific object or table names were provided in the supplied excerpt, so a concrete polling example with real leaf names cannot be honestly constructed. In general, an operator managing G.fast lines would expect to poll per-line rate and SNR margin objects to detect a line that has retrained at a lower rate due to noise or crosstalk. Confirming exact object names would require the full MIB source.

Describes G-FAST broadband technology management for Dasan network access devices.