All MIBs › DASAN-ADSL-MIB
Organization: Dasan Co., Ltd.
Last Updated: 2004-07-15
Category: DASAN Networks, DSL / Broadband Access
Description: Monitors ADSL line statistics, attenuation, and training status on Dasan DSL access multiplexers.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DASAN-ADSL-MIB?
This MIB is a DASAN Networks proprietary extension to the standard ADSL-LINE-MIB, adding vendor-specific objects to ADSL DSL Access Multiplexer (DSLAM) line and channel tables. It exposes DSL line configuration (line coding type, transmit configuration, transceiver capability) and extended per-line data such as UTOPIA Layer-2 addressing and transceiver capability versus actual negotiated rates. Monitoring focus is on DSL physical-layer hardware status: transceiver capability negotiation, line coding type, and transmit configuration reveal whether a subscriber's DSL line is synced correctly or experiencing training/attenuation issues. It is explicitly stated as an extension to the standard ADSL-LINE-MIB (RFC 2662), extending its Atuc/Atur physical, channel, and performance-data tables. Deployment context is DASAN ADSL DSLAM line cards delivering broadband DSL service to subscribers in carrier access networks. Engineers can download the DASAN-ADSL-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-ADSL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- DASAN Networks ADSL DSLAM line card
- DSL access multiplexer
Monitoring Examples
Poll dsAdslLineExtnTable (accessed via dsAdslLineExtnAction) for dsAdslLineExtnTransAtucCap versus dsAdslLineExtnTransAtucActual to detect a subscriber line negotiating a lower rate than its capability suggests, and check dsDslSystemLineCodingType and dsDslSystemLineTxCfg for line configuration mismatches. These extend the standard adslLineTable/adslAtucPhysTable objects from ADSL-LINE-MIB with DASAN-specific detail.
What Can Be Monitored
- DSL line coding type
- transmit configuration
- transceiver capability vs. actual negotiated rate
- UTOPIA L2 addressing
- per-line training/status
This MIB depends on
Related MIBs
Imported Objects
From ADSL-LINE-MIB
| adslAtucChanIntervalNumber | OBJECT-TYPE |
| adslAtucIntervalNumber | OBJECT-TYPE |
| adslAturChanIntervalNumber | OBJECT-TYPE |
| adslLineAlarmConfProfileName | OBJECT-TYPE |
| adslLineConfProfileName | OBJECT-TYPE |
From DASAN-SMI
| dasanMgmt | OBJECT-IDENTITY |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| mib-2 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using dsAdslAtucPhysExtnTxAtmCellCounter OID:
Select a DASAN Networks ADSL DSLAM line card as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dsAdslAtucPhysExtnTxAtmCellCounter into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object Provides transmit ATM cell counter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dasanAdslLineMIB | 1.3.6.1.4.1.6296.9.5.1 | |||
| dasanAdslMIB | 1.3.6.1.4.1.6296.9.5 | The MIB module to describe ADSL product. The MIB module that provides objects that are proprietary and extension to ADSL- LINE-MIB. The MIB include extension to following Tables. 1.) adslLineTable 2.) adslAtucPhysTable 3.) adslAturPhysTable 4.) adslAtucChanTable 5.) adslAturChanTable 6.) adslAtucPerfDataTable --7.) adslAturPerfDataTable 8.) adslAtucIntervalTable --9.) adslAturIntervalTable 10.) adslAtucChanPerfDataTable 11.) adslAturChanPerfDataTable 12.) adslAtucChanIntervalTable 13.) adslAturChanIntervalTable 14.) adslLineConfProfileTable 15.) adslLineAlarmConfProfileTable The MIB also include a set of scalar(s) clubbed under the group 'dsAdslCapabilityGroup'. | ||
| dasanAdslMIBObjects | 1.3.6.1.4.1.6296.9.5.1.1 | |||
| INT dsAdslAtucChanExtnCurrAtmStatus | 1.3.6.1.4.1.6296.9.5.1.1.6.1.1 | INTEGER | read-only | indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'. |
| dsAdslAtucChanExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.6.1 | not-accessible | An entry (conceptual row) in the dsAdslAtucChanExtnTable. The Table is indexed by ifIndex. | |
| INT dsAdslAtucChanExtnRsDepth | 1.3.6.1.4.1.6296.9.5.1.1.6.1.3 | INTEGER | read-only | Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1. |
| INT dsAdslAtucChanExtnRsRedundancy | 1.3.6.1.4.1.6296.9.5.1.1.6.1.4 | INTEGER | read-only | Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction. |
| INT dsAdslAtucChanExtnRsSymbols | 1.3.6.1.4.1.6296.9.5.1.1.6.1.2 | INTEGER | read-only | Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1. |
| dsAdslAtucChanExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.6 | not-accessible | This table provides one row for each ATUC channel. This Table is an extention to adslAtucChanTable defined in rfc 2662. | |
| dsAdslAtucChanIntervalExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.14.1 | not-accessible | An entry (conceptual row) in the dsAdslAtucChanIntervalExtnTable. The Table is indexed by ifIndex and adslAtucChanIntervalNumber. | |
| C32 dsAdslAtucChanIntervalExtnHec | 1.3.6.1.4.1.6296.9.5.1.1.14.1.4 | Counter32 | read-only | Indicates Header error check counter on this channel during this interval. |
| C32 dsAdslAtucChanIntervalExtnNcd | 1.3.6.1.4.1.6296.9.5.1.1.14.1.2 | Counter32 | read-only | Indicates count of no cell delineation on this channel for this interval. |
| C32 dsAdslAtucChanIntervalExtnOcd | 1.3.6.1.4.1.6296.9.5.1.1.14.1.3 | Counter32 | read-only | Indicates count of out cell delineation on this channel for this interval. |
| dsAdslAtucChanIntervalExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.14 | not-accessible | This table provides a row for each ATUC channel's performance data collection interval. This table is an extension to adslAtucChanIntervalTable defined in rfc 2662. | |
| C32 dsAdslAtucChanIntervalExtnTimeElapsed | 1.3.6.1.4.1.6296.9.5.1.1.14.1.1 | Counter32 | read-only | Total time elapsed (in seconds) in this interval. |
| G32 dsAdslAtucChanPerfDataExtnCurr15MinHec | 1.3.6.1.4.1.6296.9.5.1.1.12.1.7 | Gauge32 | read-only | Header error check counter(hec) on this channel within the current 15 minute time interval. |
| G32 dsAdslAtucChanPerfDataExtnCurr15MinNcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.5 | Gauge32 | read-only | Count of no cell delineation(ncd) on this channel within the current 15 minute time interval. |
| G32 dsAdslAtucChanPerfDataExtnCurr15MinOcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.6 | Gauge32 | read-only | Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval. |
| G32 dsAdslAtucChanPerfDataExtnCurr1DayHec | 1.3.6.1.4.1.6296.9.5.1.1.12.1.10 | Gauge32 | read-only | Header error check counter (hec) on this channel within the current 1 day time interval. |
| G32 dsAdslAtucChanPerfDataExtnCurr1DayNcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.8 | Gauge32 | read-only | Count of no cell delineation (ncd) on this channel within the current 1 day time interval. |
| G32 dsAdslAtucChanPerfDataExtnCurr1DayOcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.9 | Gauge32 | read-only | Count of out of cell delineation (ocd) on this channel within the current 1 day time interval. |
| dsAdslAtucChanPerfDataExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.12.1 | not-accessible | An entry (conceptual row) in the dsAdslAtucChanPerfDataExtnTable. The Table is indexed by ifIndex. | |
| G32 dsAdslAtucChanPerfDataExtnHec | 1.3.6.1.4.1.6296.9.5.1.1.12.1.4 | Gauge32 | read-only | Header error check counter(hec) on this channel. |
| G32 dsAdslAtucChanPerfDataExtnNcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.2 | Gauge32 | read-only | Count of no cell delineation(ncd) on this channel. |
| G32 dsAdslAtucChanPerfDataExtnOcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.3 | Gauge32 | read-only | Count of out of cell delineation (ocd) on this channel. |
| G32 dsAdslAtucChanPerfDataExtnPrev1DayHec | 1.3.6.1.4.1.6296.9.5.1.1.12.1.13 | Gauge32 | read-only | Header error check counter(hec) on this channel within the most recent previous 1-day period. |
| G32 dsAdslAtucChanPerfDataExtnPrev1DayNcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.11 | Gauge32 | read-only | Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period. |
| G32 dsAdslAtucChanPerfDataExtnPrev1DayOcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.12 | Gauge32 | read-only | Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period. |
| dsAdslAtucChanPerfDataExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.12 | not-accessible | This table provides one row for each ATUC channel. This table is an extention to adslAtucChanPerfDataTable. | |
| G32 dsAdslAtucChanPerfDataExtnTimeElapsed | 1.3.6.1.4.1.6296.9.5.1.1.12.1.1 | Gauge32 | read-only | Total elapsed seconds in this interval. |
| dsAdslAtucIntervalExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.10.1 | not-accessible | An entry (conceptual row) in the dsAdslAtucIntervalExtnTable. The Table is indexed by ifIndex and adslAtucIntervalNumber. | |
| G32 dsAdslAtucIntervalExtnFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.10.1.2 | Gauge32 | read-only | This variable indicates Count of seconds in the interval when there was Failed Fast Retrains. |
| G32 dsAdslAtucIntervalExtnFastR | 1.3.6.1.4.1.6296.9.5.1.1.10.1.1 | Gauge32 | read-only | This variable indicates Count of seconds in the interval when there was Fast Retrains. |
| G32 dsAdslAtucIntervalExtnSesL | 1.3.6.1.4.1.6296.9.5.1.1.10.1.3 | Gauge32 | read-only | This variable indicates Count of seconds in the interval when there was severely errored seconds. |
| dsAdslAtucIntervalExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.10 | not-accessible | This table provides one row for each ATUC performance data collection interval. This Table is an extention to adslAtucIntervalTable defined in rfc 2662. | |
| G32 dsAdslAtucIntervalExtnTimeElapsed | 1.3.6.1.4.1.6296.9.5.1.1.10.1.5 | Gauge32 | read-only | This variable indicates the total Elapsed time in this interval. |
| G32 dsAdslAtucIntervalExtnUasL | 1.3.6.1.4.1.6296.9.5.1.1.10.1.4 | Gauge32 | read-only | This variable indicates Count of seconds in the interval when there was unavailable errored seconds. |
| G32 dsAdslAtucMSGds | 1.3.6.1.4.1.6296.9.5.1.1.4.1.37 | Gauge32 | read-only | Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet. |
| NTF dsAdslAtucOpStateChangeTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.1 | Operational state of the transceiver is changed | ||
| G32 dsAdslAtucPerfDataExtnCurr15MinFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.6 | Gauge32 | read-only | Count of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2 |
| G32 dsAdslAtucPerfDataExtnCurr15MinFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.5 | Gauge32 | read-only | Count of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1 |
| G32 dsAdslAtucPerfDataExtnCurr15MinFecsL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.19 | Gauge32 | read-only | Count of 1-second intervals, in the current 15 minute interval, with one or more forward error correction (FEC) anomalies (Not available for ADSL). |
| G32 dsAdslAtucPerfDataExtnCurr15MinLossL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.23 | Gauge32 | read-only | . |
| G32 dsAdslAtucPerfDataExtnCurr15MinSesL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.7 | Gauge32 | read-only | Count of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7 |
| G32 dsAdslAtucPerfDataExtnCurr15MinUasL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.8 | Gauge32 | read-only | Count of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9 |
| G32 dsAdslAtucPerfDataExtnCurr1DayFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.10 | Gauge32 | read-only | Count of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2 |
| G32 dsAdslAtucPerfDataExtnCurr1DayFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.9 | Gauge32 | read-only | Count of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1 |
| G32 dsAdslAtucPerfDataExtnCurr1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.20 | Gauge32 | read-only | NCount of 1-second intervals, during the current day as measured by adslAtucPerfCurr1Day-TimeElapsed, with one or moreforward error correction (FEC) anomalies (Not available for ADSL). |
| G32 dsAdslAtucPerfDataExtnCurr1DayLossL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.24 | Gauge32 | read-only | . |
| G32 dsAdslAtucPerfDataExtnCurr1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.11 | Gauge32 | read-only | Count of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7 |
| G32 dsAdslAtucPerfDataExtnCurr1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.12 | Gauge32 | read-only | Count of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9 |
| dsAdslAtucPerfDataExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.8.1 | not-accessible | An entry (conceptual row) in the dsAdslAtucPerfDataExtnTable. The Table is indexed by ifIndex. | |
| G32 dsAdslAtucPerfDataExtnPrev1DayFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.14 | Gauge32 | read-only | Count of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2 |
| G32 dsAdslAtucPerfDataExtnPrev1DayFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.13 | Gauge32 | read-only | Count of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1 |
| G32 dsAdslAtucPerfDataExtnPrev1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.21 | Gauge32 | read-only | Count of 1-second intervals, within the most recent previous 1-day period, with one or more forward error correction (FEC) anomalies (Not available for ADSL). |
| G32 dsAdslAtucPerfDataExtnPrev1DayLossL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.25 | Gauge32 | read-only | . |
| G32 dsAdslAtucPerfDataExtnPrev1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.15 | Gauge32 | read-only | Count of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7 |
| G32 dsAdslAtucPerfDataExtnPrev1DayTimeElapsed | 1.3.6.1.4.1.6296.9.5.1.1.8.1.17 | Gauge32 | read-only | Total elapsed seconds in this interval in seconds. |
| G32 dsAdslAtucPerfDataExtnPrev1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.16 | Gauge32 | read-only | Count of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9 |
| G32 dsAdslAtucPerfDataExtnStatFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.2 | Gauge32 | read-only | The value of this object indicates the count of failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2 |
| G32 dsAdslAtucPerfDataExtnStatFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.1 | Gauge32 | read-only | The value of this object indicates the count of fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1 |
| G32 dsAdslAtucPerfDataExtnStatFecsL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.18 | Gauge32 | read-only | Count of 1-second intervals with one or more forward error correction (FEC) anomalies since agent reset (Not available for ADSL). |
| G32 dsAdslAtucPerfDataExtnStatLossL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.22 | Gauge32 | read-only | Count of 1-second intervals containing one or more loss of signal (LOS) defects (Not available for ADSL). |
| G32 dsAdslAtucPerfDataExtnStatSesL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.3 | Gauge32 | read-only | The value of this object indicates the count of severely errored second line. REFERENCE ITU G.997.1 Section 7.2.1.1.7 |
| G32 dsAdslAtucPerfDataExtnStatUasL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.4 | Gauge32 | read-only | The value of this object indicates the count of unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9 |
| dsAdslAtucPerfDataExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.8 | not-accessible | This table provides one row for each ATUC. This table is extention to adslAtucPerfDataTable defined in rfc-2662. | |
| NTF dsAdslAtucPerfESsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.11 | Errored Seconds 1-day interval threshold reached | ||
| NTF dsAdslAtucPerfFailedFastRThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.3 | Failed retrains 15-minute interval threshold reached | ||
| NTF dsAdslAtucPerfFecsLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.14 | Forward error correction Seconds 1-day interval threshold reached | ||
| NTF dsAdslAtucPerfFecsLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.6 | Forward error correction 15-minute interval threshold reached | ||
| NTF dsAdslAtucPerfLofsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.7 | Loss of Frames 1-day interval threshold reached | ||
| NTF dsAdslAtucPerfLolsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.9 | Loss of Link 1-day interval threshold reached | ||
| NTF dsAdslAtucPerfLossThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.8 | Loss of Signal 1-day interval threshold reached | ||
| NTF dsAdslAtucPerfLprsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.10 | Loss of Power 1-day interval threshold reached | ||
| NTF dsAdslAtucPerfSesLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.12 | Severely Errored Seconds 1-day interval threshold reached | ||
| NTF dsAdslAtucPerfSesLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.4 | Severely Errored Seconds 15-minute interval threshold reached | ||
| NTF dsAdslAtucPerfUasLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.13 | Unavailable Errored Seconds 1-day interval threshold reached | ||
| NTF dsAdslAtucPerfUasLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.5 | Unavailable Errored Seconds 15-minute interval threshold reached | ||
| INT dsAdslAtucPhysExtnActualStd | 1.3.6.1.4.1.6296.9.5.1.1.4.1.2 | INTEGER | read-only | This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection. |
| INT dsAdslAtucPhysExtnBertError | 1.3.6.1.4.1.6296.9.5.1.1.4.1.3 | INTEGER | read-only | This object indicates the No. of bit errors detected during BERT. |
| INT dsAdslAtucPhysExtnBertSync | 1.3.6.1.4.1.6296.9.5.1.1.4.1.9 | INTEGER | read-only | Indicates if the Signal is in Sync or not. |
| INT dsAdslAtucPhysExtnChanPerfBE | 1.3.6.1.4.1.6296.9.5.1.1.4.1.24 | INTEGER | read-only | The near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL). |
| INT dsAdslAtucPhysExtnChanPerfCD | 1.3.6.1.4.1.6296.9.5.1.1.4.1.23 | INTEGER | read-only | The near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state. (Not available for ADSL). |
| INT dsAdslAtucPhysExtnChanPerfCU | 1.3.6.1.4.1.6296.9.5.1.1.4.1.33 | INTEGER | read-only | The near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL). |
| INT dsAdslAtucPhysExtnChipVersion | 1.3.6.1.4.1.6296.9.5.1.1.4.1.35 | INTEGER | read-only | GlobespanVirata parameter that indicates the DSP version number. |
| INT dsAdslAtucPhysExtnDataBoostStatus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.21 | INTEGER | read-only | This object indicates whether DataBoost is utilized for the connection. |
| OCT dsAdslAtucPhysExtnDeltHLINpsus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.26 | OCTET STRING | read-only | DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. |
| INT dsAdslAtucPhysExtnDeltHLINSCus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.25 | INTEGER | read-only | DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus). |
| INT dsAdslAtucPhysExtnDeltHLOGMTus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.27 | INTEGER | read-only | DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus). |
| OCT dsAdslAtucPhysExtnDeltHLOGpsus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.28 | OCTET STRING | read-only | DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. |
| INT dsAdslAtucPhysExtnDeltLastTxState | 1.3.6.1.4.1.6296.9.5.1.1.4.1.31 | INTEGER | read-only | DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus). |
| INT dsAdslAtucPhysExtnDeltQLNMTus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.29 | INTEGER | read-only | DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus). |
| OCT dsAdslAtucPhysExtnDeltQLNpsus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.30 | OCTET STRING | read-only | DELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. |
| dsAdslAtucPhysExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.4.1 | not-accessible | An entry (conceptual row) in the dsAdslAtucPhysExtnTable. The Table is indexed by ifIndex. | |
| INT dsAdslAtucPhysExtnExtendedPsdStatus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.34 | INTEGER | read-only | GlobespanVirata parameter that indicates whether an extended or the standard upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation. |
| INT dsAdslAtucPhysExtnIdleBertCells | 1.3.6.1.4.1.6296.9.5.1.1.4.1.8 | INTEGER | read-only | Number of idle cells. |
| INT dsAdslAtucPhysExtnIdleBertError | 1.3.6.1.4.1.6296.9.5.1.1.4.1.7 | INTEGER | read-only | Number of bit errors. |
| INT dsAdslAtucPhysExtnOpState | 1.3.6.1.4.1.6296.9.5.1.1.4.1.1 | INTEGER | read-only | This object indicates the operational state of the ATU. Values include idle,handshake, training, etc. |
| INT dsAdslAtucPhysExtnParametricTestResult | 1.3.6.1.4.1.6296.9.5.1.1.4.1.10 | INTEGER | read-only | Indicates the Result of the Parametric Test conducted on the Xcvr. |
| INT dsAdslAtucPhysExtnPilotTone | 1.3.6.1.4.1.6296.9.5.1.1.4.1.36 | INTEGER | read-only | GlobespanVirata parameter that indicates the Pilot Tone Index. |
| INT dsAdslAtucPhysExtnPMState | 1.3.6.1.4.1.6296.9.5.1.1.4.1.32 | INTEGER | read-only | Line Power Management State. (Not available for ADSL). |
| INT dsAdslAtucPhysExtnPsdMaskMode | 1.3.6.1.4.1.6296.9.5.1.1.4.1.38 | INTEGER | read-only | GlobespanVirata parameter that indicates the actual Psd Mask currently being used. |
| INT dsAdslAtucPhysExtnRxAtmCellCounter | 1.3.6.1.4.1.6296.9.5.1.1.4.1.5 | INTEGER | read-only | This object Provides receive ATM cell counter. |
| INT dsAdslAtucPhysExtnStartProgress | 1.3.6.1.4.1.6296.9.5.1.1.4.1.6 | INTEGER | read-only | This object provides current detailed start up information to be used for debugging. |
| dsAdslAtucPhysExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.4 | not-accessible | This table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662. | |
| OCT dsAdslAtucPhysExtnTestArray | 1.3.6.1.4.1.6296.9.5.1.1.4.1.22 | OCTET STRING | read-only | This object indicates the Parametric Test Array. Every Four octects refer to one element in this array of octets. |
| C32 dsAdslAtucPhysExtnTxAtmCellCounterEx | 1.3.6.1.4.1.6296.9.5.1.1.4.1.4 | Counter32 | read-only | This object Provides transmit ATM cell counter. |
| NTF dsAdslAtucPmStateChangeTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.2 | Current PM state of the transceiver is changed. | ||
| dsAdslAtucTraps | 1.3.6.1.4.1.6296.9.5.1.2.1 | |||
| INT dsAdslAturChanExtnCurrAtmStatus | 1.3.6.1.4.1.6296.9.5.1.1.7.1.1 | INTEGER | read-only | This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect. |
| dsAdslAturChanExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.7.1 | not-accessible | An entry (conceptual row) in the dsAdslAturChanExtnTable. The Table is indexed by IfIndex. | |
| U32 dsAdslAturChanExtnRsDepth | 1.3.6.1.4.1.6296.9.5.1.1.7.1.3 | Unsigned32 | read-only | This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1. |
| U32 dsAdslAturChanExtnRsRedundancy | 1.3.6.1.4.1.6296.9.5.1.1.7.1.4 | Unsigned32 | read-only | This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction. |
| U32 dsAdslAturChanExtnRsSymbols | 1.3.6.1.4.1.6296.9.5.1.1.7.1.2 | Unsigned32 | read-only | This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1. |
| dsAdslAturChanExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.7 | not-accessible | This table is extention to adslAturChanTable defined in rfc-2662. This table provides one row for each ATUR channel. ADSL channel interfaces are those Interface Table entries where ifType is equal to adslInterleave(124) or adslFast(125). | |
| dsAdslAturChanIntervalExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.15.1 | not-accessible | An entry (conceptual row) in the dsAdslAturChanIntervalExtnTable. The Table is indexed by IfIndex and dsAdslAturChanIntervalExtnNumber. | |
| G32 dsAdslAturChanIntervalExtnHec | 1.3.6.1.4.1.6296.9.5.1.1.15.1.2 | Gauge32 | read-only | Indicates Header error check counter on this channel during this interval. |
| G32 dsAdslAturChanIntervalExtnNcd | 1.3.6.1.4.1.6296.9.5.1.1.15.1.1 | Gauge32 | read-only | Indicates count of no cell delineation on this channel for this interval. |
| dsAdslAturChanIntervalExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.15 | not-accessible | This table is extention to adslAturChanIntervalTable defined in rfc-2662. This table provides one row for each ATUR channel's performance data collection interval. | |
| G32 dsAdslAturChanPerfDataExtnCurr15MinHec | 1.3.6.1.4.1.6296.9.5.1.1.13.1.4 | Gauge32 | read-only | Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval. |
| G32 dsAdslAturChanPerfDataExtnCurr15MinNcd | 1.3.6.1.4.1.6296.9.5.1.1.13.1.3 | Gauge32 | read-only | Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval. |
| G32 dsAdslAturChanPerfDataExtnCurr1DayHec | 1.3.6.1.4.1.6296.9.5.1.1.13.1.6 | Gauge32 | read-only | Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval. |
| G32 dsAdslAturChanPerfDataExtnCurr1DayNcd | 1.3.6.1.4.1.6296.9.5.1.1.13.1.5 | Gauge32 | read-only | Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval. |
| dsAdslAturChanPerfDataExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.13.1 | not-accessible | An entry (conceptual row) in the dsAdslAturChanPerfDataExtnTable. The Table is indexed by IfIndex. | |
| G32 dsAdslAturChanPerfDataExtnHec | 1.3.6.1.4.1.6296.9.5.1.1.13.1.2 | Gauge32 | read-only | Number of packets with Header error check (HEC) error on this channel. |
| G32 dsAdslAturChanPerfDataExtnNcd | 1.3.6.1.4.1.6296.9.5.1.1.13.1.1 | Gauge32 | read-only | Number of packets with no cell delineation(NCD) error on this channel. |
| G32 dsAdslAturChanPerfDataExtnPrev1DayHec | 1.3.6.1.4.1.6296.9.5.1.1.13.1.8 | Gauge32 | read-only | Number of packets with Header error check (HEC) error on this channel within the most recent previous period. |
| G32 dsAdslAturChanPerfDataExtnPrev1DayNcd | 1.3.6.1.4.1.6296.9.5.1.1.13.1.7 | Gauge32 | read-only | Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period. |
| dsAdslAturChanPerfDataExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.13 | not-accessible | This table is extention to adslAturChanPerfDataTable defined in rfc-2662. This table contains the Performance Data for that ATU-R channel (fast or interleaved). | |
| G32 dsAdslAturMSGus | 1.3.6.1.4.1.6296.9.5.1.1.5.1.12 | Gauge32 | read-only | Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet. |
| G32 dsAdslAturPerfDataExtnCurr15MinFecsL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.10 | Gauge32 | read-only | Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL). |
| G32 dsAdslAturPerfDataExtnCurr15MinLossL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.14 | Gauge32 | read-only | . |
| G32 dsAdslAturPerfDataExtnCurr15MinSesL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.2 | Gauge32 | read-only | . |
| G32 dsAdslAturPerfDataExtnCurr15MinUasL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.6 | Gauge32 | read-only | . |
| G32 dsAdslAturPerfDataExtnCurr1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.11 | Gauge32 | read-only | Count of 1-second intervals, during the current day as measured by adslAturPerfCurr1Day-TimeElapsed, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL). |
| G32 dsAdslAturPerfDataExtnCurr1DayLossL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.15 | Gauge32 | read-only | . |
| G32 dsAdslAturPerfDataExtnCurr1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.3 | Gauge32 | read-only | . |
| G32 dsAdslAturPerfDataExtnCurr1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.7 | Gauge32 | read-only | . |
| dsAdslAturPerfDataExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.9.1 | not-accessible | An entry (conceptual row) in the dsAdslAturPerfDataExtnTable. The Table is indexed by ifIndex. | |
| G32 dsAdslAturPerfDataExtnPrev1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.12 | Gauge32 | read-only | Count of 1-second intervals, within the most recent previous 1-day period, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL). |
| G32 dsAdslAturPerfDataExtnPrev1DayLossL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.16 | Gauge32 | read-only | . |
| G32 dsAdslAturPerfDataExtnPrev1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.4 | Gauge32 | read-only | . |
| G32 dsAdslAturPerfDataExtnPrev1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.8 | Gauge32 | read-only | . |
| C32 dsAdslAturPerfDataExtnStatFecsL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.9 | Counter32 | read-only | Count of 1-second intervals with one or more far end forward error correction (FFEC) anomalies since agent reset (Not available for ADSL). |
| C32 dsAdslAturPerfDataExtnStatLossL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.13 | Counter32 | read-only | Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL). |
| C32 dsAdslAturPerfDataExtnStatSesL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.1 | Counter32 | read-only | . |
| C32 dsAdslAturPerfDataExtnStatUasL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.5 | Counter32 | read-only | . |
| dsAdslAturPerfDataExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.9 | not-accessible | This table provides one row for each ATU-R. ADSL physical interfaces are those Interface Table Entries where ifType is equal to adsl(94). This table is an extn to 'adslAturPerfDataExtTable' which is part of ADSL-LINE-EXT-MIB (rfc 3440). | |
| NTF dsAdslAturPerfESsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.7 | Errored Seconds 1-day interval threshold reached | ||
| NTF dsAdslAturPerfFecsLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.10 | Forward error correction Seconds 1-day interval threshold is reached | ||
| NTF dsAdslAturPerfFecsLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.3 | Forward error correction 15-minute interval threshold reached | ||
| NTF dsAdslAturPerfLofsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.4 | Loss of Frames 1-day interval threshold reached | ||
| NTF dsAdslAturPerfLossThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.5 | Loss of Signal 1-day interval threshold reached | ||
| NTF dsAdslAturPerfLprsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.6 | Loss of Power 1-day interval threshold reached | ||
| NTF dsAdslAturPerfSesLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.8 | Severely Errored Seconds 1-day interval threshold reached | ||
| NTF dsAdslAturPerfUasLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.9 | Unavailable Errored Seconds 1-day interval threshold reached | ||
| INT dsAdslAturPhysExtnChanPerfBE | 1.3.6.1.4.1.6296.9.5.1.1.5.1.4 | INTEGER | read-only | The far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL). |
| INT dsAdslAturPhysExtnChanPerfCD | 1.3.6.1.4.1.6296.9.5.1.1.5.1.2 | INTEGER | read-only | The far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(Not available for ADSL). |
| INT dsAdslAturPhysExtnChanPerfCU | 1.3.6.1.4.1.6296.9.5.1.1.5.1.3 | INTEGER | read-only | The far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL). |
| OCT dsAdslAturPhysExtnConfig | 1.3.6.1.4.1.6296.9.5.1.1.5.1.1 | OCTET STRING | read-only | This object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode). |
| OCT dsAdslAturPhysExtnDeltHLINpsds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.6 | OCTET STRING | read-only | DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets. |
| INT dsAdslAturPhysExtnDeltHLINSCds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.5 | INTEGER | read-only | DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus). |
| INT dsAdslAturPhysExtnDeltHLOGMTds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.7 | INTEGER | read-only | DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus). |
| OCT dsAdslAturPhysExtnDeltHLOGpsus | 1.3.6.1.4.1.6296.9.5.1.1.5.1.8 | OCTET STRING | read-only | DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). |
| INT dsAdslAturPhysExtnDeltLastTxState | 1.3.6.1.4.1.6296.9.5.1.1.5.1.11 | INTEGER | read-only | DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus). |
| INT dsAdslAturPhysExtnDeltQLNMTds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.9 | INTEGER | read-only | DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus). |
| OCT dsAdslAturPhysExtnDeltQLNpsds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.10 | OCTET STRING | read-only | DELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets. |
| dsAdslAturPhysExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.5.1 | not-accessible | An entry (conceptual row) in the dsAdslAturPhysExtnTable. The Table is indexed by IfIndex. | |
| dsAdslAturPhysExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.5 | not-accessible | This table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR. | |
| NTF dsAdslAturSesLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.1 | Severely Errored Seconds 15-minute interval threshold reached | ||
| dsAdslAturTraps | 1.3.6.1.4.1.6296.9.5.1.2.2 | |||
| NTF dsAdslAturUasLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.2 | Unavailable Errored Seconds 15-minute interval threshold reached | ||
| dsAdslCapabilityGroup | 1.3.6.1.4.1.6296.9.5.1.1.2 | |||
| BIT dsAdslCapabilityLineTxCap | 1.3.6.1.4.1.6296.9.5.1.1.2.1 | Bits | read-only | This bitmap specifies which all transmission modes, which the ATU-C is capable of supporting. Right now support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MND |
| dsAdslLineAlarmConfProfileExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.17.1 | not-accessible | An entry (conceptual row) in the dsAdslLineAlarmConfProfileExtnTable. The Table is indexed by adslLineAlarmConfProfileName. | |
| dsAdslLineAlarmConfProfileExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.17 | not-accessible | This table contains information on the ADSL line configuration. This table is an extention to adslLineAlarmConfProfileExtnTable defined in rfc 2662. | |
| OCT dsAdslLineAlarmConfProfileName | 1.3.6.1.4.1.6296.9.5.1.1.17.1.1 | OCTET STRING | not-accessible | This object is used by the line alarm configuration Extn table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEND |
| INT dsAdslLineAlarmExtnAtucOpStateTrapEnable | 1.3.6.1.4.1.6296.9.5.1.1.17.1.5 | INTEGER | read-write | Enables and disables the OpStateChangeTrap. |
| INT dsAdslLineAlarmExtnAtucPmStateTrapEnable | 1.3.6.1.4.1.6296.9.5.1.1.17.1.25 | INTEGER | read-write | Enables and disables the PmStateChangeTrap. |
| INT dsAdslLineAlarmExtnAtucThresh15MinFailFastR | 1.3.6.1.4.1.6296.9.5.1.1.17.1.2 | INTEGER | read-write | The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap. |
| I32 dsAdslLineAlarmExtnAtucThresh15MinFecsL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.6 | Integer32 | read-write | The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'. |
| INT dsAdslLineAlarmExtnAtucThresh15MinSesL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.3 | INTEGER | read-write | The number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP to send an adslAtucSesLTrap. |
| INT dsAdslLineAlarmExtnAtucThresh15MinUasL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.4 | INTEGER | read-write | The first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucUasLThreshTrap notifications will be generated. |
| I32 dsAdslLineAlarmExtnAtucThresh1DayESs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.11 | Integer32 | read-write | The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfESsThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAtucThresh1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.14 | Integer32 | read-write | The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh1Day'. |
| I32 dsAdslLineAlarmExtnAtucThresh1DayLofs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.7 | Integer32 | read-write | The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLofsThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAtucThresh1DayLols | 1.3.6.1.4.1.6296.9.5.1.1.17.1.9 | Integer32 | read-write | The number of Loss of Link Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLolsThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAtucThresh1DayLoss | 1.3.6.1.4.1.6296.9.5.1.1.17.1.8 | Integer32 | read-write | The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLossThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAtucThresh1DayLprs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.10 | Integer32 | read-write | The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLprsThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAtucThresh1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.12 | Integer32 | read-write | The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfSesLThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAtucThresh1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.13 | Integer32 | read-write | The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAtucPerfUasLThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAturThresh15MinFecsL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.15 | Integer32 | read-write | The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh'. |
| I32 dsAdslLineAlarmExtnAturThresh15MinSesL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.23 | Integer32 | read-write | The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'. |
| I32 dsAdslLineAlarmExtnAturThresh15MinUasL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.24 | Integer32 | read-write | The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'. |
| I32 dsAdslLineAlarmExtnAturThresh1DayESs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.19 | Integer32 | read-write | The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfESsThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAturThresh1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.22 | Integer32 | read-write | The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh1Day'. |
| I32 dsAdslLineAlarmExtnAturThresh1DayLofs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.16 | Integer32 | read-write | The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLofsThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAturThresh1DayLoss | 1.3.6.1.4.1.6296.9.5.1.1.17.1.17 | Integer32 | read-write | The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLossThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAturThresh1DayLprs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.18 | Integer32 | read-write | The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLprsThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAturThresh1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.20 | Integer32 | read-write | The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfSesLThresh1DayTrap'. |
| I32 dsAdslLineAlarmExtnAturThresh1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.21 | Integer32 | read-write | The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAturPerfUasLThresh1DayTrap'. |
| INT dsAdslLineConfProfileExtnAdvertisedCapabilities | 1.3.6.1.4.1.6296.9.5.1.1.16.1.32 | INTEGER | read-write | Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+. |
| INT dsAdslLineConfProfileExtnAnnexType | 1.3.6.1.4.1.6296.9.5.1.1.16.1.26 | INTEGER | read-write | This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. |
| INT dsAdslLineConfProfileExtnAtucConfMinINP | 1.3.6.1.4.1.6296.9.5.1.1.16.1.63 | INTEGER | read-only | Parameter used to specify the minimum impulse noise protection for the downstream bearer channel. |
| dsAdslLineConfProfileExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.16.1 | not-accessible | An entry (conceptual row) in the dsAdslLineConfProfileExtnTable. The Table is indexed by adslLineConfProfileName. | |
| INT dsAdslLineConfProfileExtnIntCorrectionDown | 1.3.6.1.4.1.6296.9.5.1.1.16.1.18 | INTEGER | read-write | This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled. |
| INT dsAdslLineConfProfileExtnLineDmtConfMode | 1.3.6.1.4.1.6296.9.5.1.1.16.1.34 | INTEGER | read-write | Selects if there is overlap or no overlap of bins. |
| INT dsAdslLineConfProfileExtnLineType | 1.3.6.1.4.1.6296.9.5.1.1.16.1.4 | INTEGER | read-write | This object is used to configure the ADSL physical line mode. |
| INT dsAdslLineConfProfileExtnMaxDCo | 1.3.6.1.4.1.6296.9.5.1.1.16.1.30 | INTEGER | read-write | This object is used to indicate Maximum interleaving depth supported by the customer's hardware. |
| INT dsAdslLineConfProfileExtnPML0Time | 1.3.6.1.4.1.6296.9.5.1.1.16.1.43 | INTEGER | read-write | PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state. |
| INT dsAdslLineConfProfileExtnPML2ATPR | 1.3.6.1.4.1.6296.9.5.1.1.16.1.45 | INTEGER | read-write | PM configuration parameter, related to the L2 low power state. This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state. |
| INT dsAdslLineConfProfileExtnPML2EntryRateMinTime | 1.3.6.1.4.1.6296.9.5.1.1.16.1.66 | INTEGER | read-write | PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum interval of time that the net data rate for the bearer channel should stay below GSMIB_adslAtucConfGsPML2EntryThresholdRate before autonomous entry into low power state (L2). The minimum entry rate time is coded in seconds, and can range from 900 to 65535. |
| INT dsAdslLineConfProfileExtnPML2EntryThresholdRate | 1.3.6.1.4.1.6296.9.5.1.1.16.1.64 | INTEGER | read-write | PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous entry into low power state (L2). The data rate is coded in bit/s, and must be less than or equal to the value of GSMIB_adslAtucConfGsPML2Exit ThresholdRate. |
| INT dsAdslLineConfProfileExtnPML2ExitThresholdRate | 1.3.6.1.4.1.6296.9.5.1.1.16.1.65 | INTEGER | read-write | PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous exit from low power state (L2). The data rate is coded in bit/s, and must be less than the value of GSMIB_adslAtucConfPML2MinRate. |
| INT dsAdslLineConfProfileExtnPML2Rate | 1.3.6.1.4.1.6296.9.5.1.1.16.1.46 | INTEGER | read-write | PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s. |
| INT dsAdslLineConfProfileExtnPML2Time | 1.3.6.1.4.1.6296.9.5.1.1.16.1.44 | INTEGER | read-write | PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. |
| BIT dsAdslLineConfProfileExtnPMMode | 1.3.6.1.4.1.6296.9.5.1.1.16.1.42 | Bits | read-write | PM-related parameter used by the ATU-C to set the allowed link states. |
| INT dsAdslLineConfProfileExtnPsdMaskType | 1.3.6.1.4.1.6296.9.5.1.1.16.1.33 | INTEGER | read-write | Selects the PSD mask option to be used. |
| INT dsAdslLineConfProfileExtnRsFastOvrhdDown | 1.3.6.1.4.1.6296.9.5.1.1.16.1.17 | INTEGER | read-write | Sets the percentage overhead for the downstream-fast buffer. |
| INT dsAdslLineConfProfileExtnRsFastOvrhdUp | 1.3.6.1.4.1.6296.9.5.1.1.16.1.19 | INTEGER | read-write | Sets the 4576014verhead for the upstream-fast buffer. |
| INT dsAdslLineConfProfileExtnRsIntCorrectionUp | 1.3.6.1.4.1.6296.9.5.1.1.16.1.3 | INTEGER | read-write | Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3. |
| INT dsAdslLineConfProfileExtnRxBinAdjust | 1.3.6.1.4.1.6296.9.5.1.1.16.1.10 | INTEGER | read-write | Employs Rx Start/End bin settings. |
| INT dsAdslLineConfProfileExtnRxEndBin | 1.3.6.1.4.1.6296.9.5.1.1.16.1.9 | INTEGER | read-write | Highest bin number allowed for Rx signal. The Range and default value for ADSL+ is 0x01 - 0x1ff and 0x1d respectively. |
| INT dsAdslLineConfProfileExtnRxStartBin | 1.3.6.1.4.1.6296.9.5.1.1.16.1.8 | INTEGER | read-write | Lowest bin number allowed for Rx signal. The Range for ADSL+ is 0x01 - 0x1ff. The default for Annex B is 0x01. |
| INT dsAdslLineConfProfileExtnStandard | 1.3.6.1.4.1.6296.9.5.1.1.16.1.13 | INTEGER | read-write | Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. |
| dsAdslLineConfProfileExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.16 | not-accessible | This table contains information on the ADSL line configuration. This Table is an extension to adslLineConfProfileTable. | |
| INT dsAdslLineConfProfileExtnTxEndBin | 1.3.6.1.4.1.6296.9.5.1.1.16.1.5 | INTEGER | read-write | Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff and 0x1ff respectively. |
| INT dsAdslLineConfProfileExtnTxPowerAttenuation | 1.3.6.1.4.1.6296.9.5.1.1.16.1.15 | INTEGER | read-write | Specifies value of Tx power attenuation. |
| INT dsAdslLineConfProfileExtnTxStartBin | 1.3.6.1.4.1.6296.9.5.1.1.16.1.6 | INTEGER | read-write | Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 0x40 respectively. |
| INT dsAdslLineConfProfileExtnUpstreamPSD | 1.3.6.1.4.1.6296.9.5.1.1.16.1.41 | INTEGER | read-write | This object sets the upstream PSD to be either extended or standard. Used for GSpan Plus only. |
| OCT dsAdslLineConfProfileName | 1.3.6.1.4.1.6296.9.5.1.1.16.1.1 | OCTET STRING | not-accessible | This object is used by the line configuration table in order to identify a row of this table. |
| INT dsAdslLineExtnAction | 1.3.6.1.4.1.6296.9.5.1.1.3.1.1 | INTEGER | read-write | this object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests. |
| INT dsAdslLineExtnClockType | 1.3.6.1.4.1.6296.9.5.1.1.3.1.6 | INTEGER | read-only | This object indicates parameter to set use of either crystal or oscillator. |
| dsAdslLineExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.3.1 | not-accessible | An entry (conceptual row) in the dsAdslLineExtnTable. The Table is indexed by ifIndex. | |
| INT dsAdslLineExtnLineDmtTrellis | 1.3.6.1.4.1.6296.9.5.1.1.3.1.7 | INTEGER | read-only | Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage. |
| dsAdslLineExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.3 | not-accessible | This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662. | |
| BIT dsAdslLineExtnTransAtucActual | 1.3.6.1.4.1.6296.9.5.1.1.3.1.5 | Bits | read-only | The transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1. |
| BIT dsAdslLineExtnTransAtucCap | 1.3.6.1.4.1.6296.9.5.1.1.3.1.4 | Bits | read-only | The transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1. |
| INT dsAdslLineExtnUtopiaL2RxAddr | 1.3.6.1.4.1.6296.9.5.1.1.3.1.2 | INTEGER | read-only | This object indicates UTOPIA Level 2 Rx address for a line. |
| INT dsAdslLineExtnUtopiaL2TxAddr | 1.3.6.1.4.1.6296.9.5.1.1.3.1.3 | INTEGER | read-only | This object indicates UTOPIA Level 2 Tx address for a line. |
| dsAdslTrap | 1.3.6.1.4.1.6296.9.5.1.2 | |||
| INT dsDslSystemDslType | 1.3.6.1.4.1.6296.9.5.1.1.1.1 | INTEGER | read-write | This object identifies the firmware to be downloaded. |
| INT dsDslSystemLineCodingType | 1.3.6.1.4.1.6296.9.5.1.1.1.2 | INTEGER | read-write | This object indicates ADSL line code type. |
| BIT dsDslSystemLineTxCfg | 1.3.6.1.4.1.6296.9.5.1.1.1.3 | Bits | read-write | This object indicates transmission capabilities with which the DSL system is configured. |
| dsDslSystemParamGroup | 1.3.6.1.4.1.6296.9.5.1.1.1 |
RFC description
ADSL and ADSL2+ line management MIB providing proprietary extensions to ADSL-LINE-MIB tables and performance data.
Start monitoring DASAN Networks ADSL DSLAM line card with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.