All MIBs › ADN-MIB › adnAtmAccRcvParam3
adnAtmAccRcvParam3
Module: ADN-MIB
OID (symbolic): ADN-MIB::adnAtmAccRcvParam3
OID (numeric): 1.3.6.1.4.1.637.3.1.4.37.2.1.42
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccRcvParam3 represents one of the following values : a) The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receivinG direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Aggregate, Receive SCR Aggregate. b) The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Receive PCR CLP 0. c) The Sustainable Cell Rate (SCR) for the Cell Loss PrioritY (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Receive SCR CLP 0. Common Name : PARAM3.
What is adnAtmAccRcvParam3?
This OID stores either the Sustainable Cell Rate (SCR) for aggregate traffic or the Peak Cell Rate for low-priority cells, depending on the traffic descriptor configuration. Network engineers need this to understand whether the link enforces average long-term rates (SCR) or peak burst rates, ensuring traffic compliance. A value of 51800 cells-per-second indicates the channel should maintain that average rate over time, allowing temporary bursts without penalty.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.637.3.1.4.37.2.1.42 snmpwalk -v2c -c public <target> ADN-MIB::adnAtmAccRcvParam3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.637.3.1.4.37.2.1.42.1 snmpget -v2c -c public <target> ADN-MIB::adnAtmAccRcvParam3.1
Start monitoring Ascom Timeplex ADN multiplexers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADN-MIB::adnAtmAccRcvParam3 OID value, configure state conditions and alerts, and monitor any Ascom Timeplex ADN multiplexers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.637 | alcatel | ADN-MIB |
| 1.3.6.1.4.1.637.3 | adn | ADN-MIB |
| 1.3.6.1.4.1.637.3.1 | adnMIB | ADN-MIB |
| 1.3.6.1.4.1.637.3.1.4 | adnExtensions | ADN-MIB |
| 1.3.6.1.4.1.637.3.1.4.37 | adnAtmMIB | ADN-MIB |
| 1.3.6.1.4.1.637.3.1.4.37.2 | adnAtmAccTable | ADN-MIB |
| 1.3.6.1.4.1.637.3.1.4.37.2.1 | adnAtmAccEntry | ADN-MIB |
| 1.3.6.1.4.1.637.3.1.4.37.2.1.42 | adnAtmAccRcvParam3 | ADN-MIB |