CM-FACILITY-MIB

All MIBs › CM-FACILITY-MIB

Organization: ADVA Optical Networking SE

Last Updated: 2021-01-27

Category: Optical and WDM

Description:

Manages facility and port configuration on ADVA FSP150CM/CC optical networking devices, handling network interface provisioning and monitoring.

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

AdminState
AfpTagControl
CmTrafficACLPriorityType
CmTrafficAclFilterActionType
CmTrafficAclFilterType
CmTrafficAclProtocolType
EthernetMediaType
EthernetPortSpeed
F3DisplayString
FlowSecState
IpVersion
OperationalState
PriorityMapMode
SecondaryState
SfpConnectorValue
SfpIdentifierValue
SfpMediaType
SignalDirectionType
TDMFrequencySourceType
TrafficDirection
UsbOperationalMode
VlanEthertype
VlanId
VlanPriority
VlanTagType

From CM-ENTITY-MIB

f3UsbHostIndex	OBJECT-TYPE
neIndex	OBJECT-TYPE
networkElementEntry	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From ENTITY-MIB

PhysicalIndex

From F3-LAG-MIB

f3LagIndex

OBJECT-TYPE

From F3-SYNC-MIB

ClkSignalType
SSMQualityLevel
SquelchControl
TimeSource

From IF-MIB

InterfaceIndex

From IPV6-TC

Ipv6Address

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

What Is CM-FACILITY-MIB?

CM-FACILITY-MIB is an ADVA Optical Networking MIB that defines facility (physical/logical port) management for the FSP150CM/CC (F3) product line of carrier Ethernet access and demarcation devices. It exposes port-level configuration and operational data — administrative and operational state, a "secondary state" that flags conditions like local/remote faults or loopback, physical/logical index mappings, MTU, media type, and configured versus negotiated link speed. This makes it directly useful for monitoring hardware status: cmEthernetAccPortOperationalState and cmEthernetAccPortSecondaryState reveal whether a given access port is up, degraded, or in an alarmed condition, while cmEthernetAccPortNegotiatedSpeed versus cmEthernetAccPortConfigSpeed exposes auto-negotiation mismatches that commonly cause performance problems. It builds on ADVA's broader entity/equipment MIB framework for the FSP150 platform and typically works alongside standard IF-MIB interface counters for full port visibility. It is deployed by carriers and enterprises using ADVA FSP150CM/CC devices for Carrier Ethernet access, demarcation, and service assurance at the network edge. Network engineers typically download the CM-FACILITY-MIB from ADVA's support portal or a MIB repository before compiling it alongside the platform's other FSP150 modules.

IPNetwork Monitor allows you to monitor SNMP objects defined in CM-FACILITY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

Ethernet access port admin state
Ethernet access port operational state
port secondary/fault state
configured vs. negotiated link speed
port MTU and media type

Supported Devices

ADVA FSP 150-XO106 (2022) — compact, temperature-hardened 10GbE Carrier Ethernet demarcation device for outdoor pole/wall mounting, same FSP150 family as the CM/CC platforms

Monitoring Examples

An operator would poll cmEthernetAccPortTable/cmEthernetAccPortEntry, checking cmEthernetAccPortAdminState against cmEthernetAccPortOperationalState to spot a port that's administratively enabled but operationally down, and cmEthernetAccPortSecondaryState to see whether the port is reporting a specific fault condition such as a loss-of-signal or loopback state. Comparing cmEthernetAccPortConfigSpeed to cmEthernetAccPortNegotiatedSpeed would catch an auto-negotiation mismatch that's silently degrading throughput on a customer-facing Ethernet access port, while cmEthernetAccPortMTU confirms jumbo-frame settings are correctly provisioned for the service.

OIDs

OID symbolic	OID numeric	Type	Access	Description
POR bits8PortGroupActivePorts	1.3.6.1.4.1.2544.1.12.4.1.78.1.16	PortState	read-write	This object represents the Active State for each port of the BITS 8 Port Group.
ADM bits8PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.78.1.3	AdminState	read-write	This object represents the Administrative State of the BITS 8 Port Group.
POR bits8PortGroupClkIfEnabledPorts	1.3.6.1.4.1.2544.1.12.4.1.78.1.17	PortState	read-write	This object represents the Clock Enabling State for each port of the BITS 8 Port Group.
bits8PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.78.1		not-accessible	A conceptual row in the bits8PortGroupTable.
BIT bits8PortGroupFrameFormat	1.3.6.1.4.1.2544.1.12.4.1.78.1.8	BitsFrameFormat	read-write	This object represents the BITS 8 Port Group Frame Format. When the group is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When the group is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. When the group is configured for a Line Type of 2048kHz, the value is none. R4.1CC and R4.3CC do not support e1-unframed.
bits8PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.34			A collection of objects used to manage the Bits 8 Port Group function.
NUM bits8PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.78.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bits8PortGroupIndex, bits8PortGroupIfIndex.
BIT bits8PortGroupImpedance	1.3.6.1.4.1.2544.1.12.4.1.78.1.14	BitsPortImpedanceMode	read-write	This object provides the line impedance mode for the BITS 8 Port Group.
I32 bits8PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.78.1.1	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, portIndex, bits8PortGroupIndex.
LIN bits8PortGroupLineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.78.1.13	LineBuildOut	read-write	This object allows to manage the line build out on the BITS 8 Port Group when the Line Type is T1.
BIT bits8PortGroupLineCode	1.3.6.1.4.1.2544.1.12.4.1.78.1.7	BitsPortLineCode	read-write	This object represents the BITS 8 Port Group Line Code. When the group is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the group is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3. When the group is configured for a Line Type of 2048kHz, the value is none.
BIT bits8PortGroupLineType	1.3.6.1.4.1.2544.1.12.4.1.78.1.6	BitsPortLineType	read-write	This object represents the BITS 8 Port Group Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode.
OPE bits8PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.78.1.4	OperationalState	read-only	This object represents the Operational State of the BITS 8 Port Group.
T/F bits8PortGroupQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.78.1.10	TruthValue	read-write	This object allows to specify whether the BITS 8 Port Group can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
ROW bits8PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.78.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of bits8PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with bits8PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The bits8PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
SAB bits8PortGroupSaBitDesignation	1.3.6.1.4.1.2544.1.12.4.1.78.1.9	SaBitDesignation	read-write	This object represents the BITS 8 Port Group Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is None. For E1 Line Type, the default value is bit4 and it can only have a value of None if QL Mode is disabled, otherwise, None is an invalid value.
SEC bits8PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.78.1.5	SecondaryState	read-only	This object represents the Secondary State of the BITS 8 Port Group.
SSM bits8PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.78.1.12	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the BITS 8 Port Group. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determine whether or not to squelch the output of the BITS 8 Port Group. If the system's QL is lower than the Squelch QL, the output is squelched. If the BITS group's QL Mode is disabled, then the received QL value is not applicable.
bits8PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.78		not-accessible	A list of entries corresponding to BITS 8 Port Group Facilities for configuration purposes.
SSM bits8PortGroupTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.78.1.11	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the BITS 8 Port Group. If the BITS group's QL Mode is disabled, then the received QL value is not applicable.
ADM bitsPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.16.1.5	AdminState	read-write	This object represents the Administrative State of the BITS Port.
T/F bitsPortAis	1.3.6.1.4.1.2544.1.12.4.1.16.1.23	TruthValue	read-write	This object allows to set the AIS signal for the BITS-OUT port.
SSM bitsPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.15	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the BITS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
T/F bitsPortCrc4	1.3.6.1.4.1.2544.1.12.4.1.16.1.21	TruthValue	read-write	This object allows to include or not the CRC to the signal of the BITS-OUT port.
PHY bitsPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
bitsPortEntry	1.3.6.1.4.1.2544.1.12.4.1.16.1		not-accessible	A conceptual row in the bitsPortTable.
SSM bitsPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.14	SSMQualityLevel	read-write	This object allows to specify the expected QL when the BITS Port is enabled for QL Mode. This object allows the user to set a minimum expected received Quality Level on the port. The default value shall be None.
BIT bitsPortFrameFormat	1.3.6.1.4.1.2544.1.12.4.1.16.1.11	BitsFrameFormat	read-write	This object represents the BITS Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When the port is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. When the port is configured for a Line Type of 2048kHz, the value is none. R4.1CC and R4.3CC do not support e1-unframed.
bitsPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.5			A collection of objects used to manage the F3 Bits Port function.
INT bitsPortIdleCode	1.3.6.1.4.1.2544.1.12.4.1.16.1.22	INTEGER	read-write	This object allows to manage the Idle Code for the BITS-OUT port.
NUM bitsPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for Bits Port. An integer index value used to uniquely identify this Bits Port.
BIT bitsPortImpedance	1.3.6.1.4.1.2544.1.12.4.1.16.1.20	BitsPortImpedanceMode	read-only	This object provides the impedance mode for the BITS-OUT port.
I32 bitsPortIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.2	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bitsPortIndex.
LIN bitsPortLineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.16.1.19	LineBuildOut	read-write	This object allows to manage the line build out on the BITS-OUT port when the Line Type is T1.
BIT bitsPortLineCode	1.3.6.1.4.1.2544.1.12.4.1.16.1.10	BitsPortLineCode	read-write	This object represents the BITS Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the port is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3. When the port is configured for a Line Type of 2048kHz, the value is none.
BIT bitsPortLineType	1.3.6.1.4.1.2544.1.12.4.1.16.1.9	BitsPortLineType	read-write	This object represents the BITS Port Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode.
OPE bitsPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.16.1.6	OperationalState	read-only	This object represents the Operational State of the BITS Port.
T/F bitsPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.16.1.13	TruthValue	read-write	This object allows to specify whether the BITS Port can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM bitsPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.16	SSMQualityLevel	read-only	This object provides the Received QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
SAB bitsPortSaBitDesignation	1.3.6.1.4.1.2544.1.12.4.1.16.1.12	SaBitDesignation	read-write	This object represents the BITS Port Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is None. For E1 Line Type, the default value is bit4 and it can only have a value of None if QL Mode is disabled, otherwise, None is an invalid value.
SAB bitsPortSaBitsAdminState	1.3.6.1.4.1.2544.1.12.4.1.16.1.24	SaBitsState	read-write	This object allows to manage the five Sa Bit values, from bit4 to bit8, for the BITS-OUT port. The object value is a BIT string that concatenate the Sa Bit values. The Sa Bit values are applied to each of the five Sa Bits of the output signal except to the one that carries SSM information when QL Mode is enabled.
SEC bitsPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.16.1.7	SecondaryState	read-only	This object represents the Secondary State of the BITS Port.
SIG bitsPortSignalFrequency	1.3.6.1.4.1.2544.1.12.4.1.16.1.27	SignalFrequency	read-write	Indicates the signal frequency of the port. Possible value are 100 kHz, 1 MHz, 1544 kHz, 2048 kHz, 5 MHz, 25 Mhz or 50 MHz. It can be set only to a port that is dedicated to yield a variety of frequencies.
SIG bitsPortSignalShape	1.3.6.1.4.1.2544.1.12.4.1.16.1.26	SignalShape	read-only	This object represents the Port Signal Shape. Indicates whether the signal has a sine or a square shape.
SQU bitsPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.16.1.25	SquelchControl	read-only	This object indicates the Squelch Control for the port. The Squelch Control determines the type of squelch control used to squelch an output of the port.
SSM bitsPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.18	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the BITS-OUT port. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determine whether or not to squelch the output of the BITS-OUT port. If the system's QL is lower than the Squelch QL, the output is squelched. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
bitsPortTable	1.3.6.1.4.1.2544.1.12.4.1.16		not-accessible	A list of entries corresponding to BITS Port Facilities for configuration purposes.
SSM bitsPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.17	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
BIT bitsPortType	1.3.6.1.4.1.2544.1.12.4.1.16.1.8	BitsPortType	read-only	This object represents the BITS Port Type.
I32 bitsPortTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.1	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Value 1 stands for BITS-IN, 2 for BITS-OUT.
ccGroup	1.3.6.1.4.1.2544.1.12.4.2.2.53			A collection of objects used to manage the CC Card.
CCA ccGroupActivePorts	1.3.6.1.4.1.2544.1.12.4.1.112.1.5	CcActivePortState	read-write	This object represents the Active State for each port of the CC 10 output port Group.
STR ccGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.112.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the group entity.
CCP ccGroupDutyCycle	1.3.6.1.4.1.2544.1.12.4.1.112.1.7	CcPortDutyCycle	read-write	63/37 or 50/50 duty cycles.
PHY ccGroupEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this input port as an entity in entityPhysical entries with entPhysicalIndex value.
ccGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.112.1		not-accessible	A conceptual row in the ccGroupTable.
NUM ccGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this group as an interface in ifTable entries with ifIndex value.
I32 ccGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.1	Integer32	read-only	An integer index value used to uniquely identify this CC Group.
I32 ccGroupPhaseAdjust	1.3.6.1.4.1.2544.1.12.4.1.112.1.6	Integer32	read-write	The delay of CC output. This value is duplicated to all the CC outputs of all the CC cards in the same 54x0. This value is usually derived from a phase measurement of the CC input. It could also use a different method to derive the CC Phase Adjust..
ccGroupTable	1.3.6.1.4.1.2544.1.12.4.1.112		not-accessible	A list of entries corresponding to Composite group output Facilities for configuration purposes.
ADM ccInputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.111.1.5	AdminState	read-write	This object represents the Administrative State of the CC input Port.
STR ccInputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.111.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the input port entity.
PHY ccInputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this input port as an entity in entityPhysical entries with entPhysicalIndex value.
ccInputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.111.1		not-accessible	A conceptual row in the ccInputPortTable.
NUM ccInputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this input port as an interface in ifTable entries with ifIndex value.
I32 ccInputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.1	Integer32	read-only	An integer index value used to uniquely identify this CC input Port.
OPE ccInputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.111.1.6	OperationalState	read-only	This object represents the Operational State of the CC input Port.
SEC ccInputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.111.1.7	SecondaryState	read-only	This object represents the Secondary State of the CC input port.
ccInputPortTable	1.3.6.1.4.1.2544.1.12.4.1.111		not-accessible	A list of entries corresponding to Composite input Port Facilities for configuration purposes.
ADM clk16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.80.1.3	AdminState	read-only	This object represents the Administrative State of the Pulse Per Second Port.
STR clk16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.80.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
SIG clk16PortGroupDirection	1.3.6.1.4.1.2544.1.12.4.1.80.1.7	SignalDirectionType	read-only	This object allows specification of the signal type (i.e. input or output).
clk16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.80.1		not-accessible	A conceptual row in the clk16PortGroupTable.
clk16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.36			A collection of objects used to manage the CLK 16 port card Group function.
NUM clk16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.80.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
I32 clk16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.80.1.1	Integer32	read-only	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
OPE clk16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.80.1.4	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
ROW clk16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.80.1.10	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with clk16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC clk16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.80.1.5	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
SQU clk16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.80.1.8	SquelchControl	read-only	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSM clk16PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.80.1.9	SSMQualityLevel	read-only	This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
clk16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.80		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
T/F cmAccPortExtBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.4	TruthValue	read-write	Whether broadcast packets need be limited per port.
U32 cmAccPortExtBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.6	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmAccPortExtBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.5	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
T/F cmAccPortExtCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.7	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
U32 cmAccPortExtCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.9	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
U32 cmAccPortExtCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.8	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
cmAccPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.75.1		not-accessible	A conceptual row in the cmAccPortExtTable.
T/F cmAccPortExtMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.1	TruthValue	read-write	Whether multicast packets need be limited on this port.
U32 cmAccPortExtMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.3	Unsigned32	read-write	The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmAccPortExtMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.2	Unsigned32	read-write	The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
NUM cmAccPortExtRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.75.1.10	VariablePointer	read-write	This object allows to set priority map profile.
cmAccPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.75		not-accessible	A list of entries corresponding to Access Port for configuration purposes.
T/F cmAccPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.22.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
cmAccPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.22.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
I32 cmAccPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.22.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
VLA cmAccPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.22.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmAccPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.22.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
cmAccPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.22		not-accessible	Ethernet Access Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
VLA cmAccPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.23.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmAccPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.23.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmAccPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.21.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
VLA cmAccPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.21.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
cmAccPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.21.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
I32 cmAccPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.21.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
VLA cmAccPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.21.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
cmAccPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.21		not-accessible	Ethernet Access Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Access port.
cmAccPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.23.1		not-accessible	A conceptual row in the cmAccPortPcpDEPairEntry.
I32 cmAccPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.23.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
cmAccPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.23		not-accessible	Ethernet Access Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
ADM cmAccPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.12.1.3	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
I32 cmAccPortQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.12.1.24	Integer32	read-write	This object specifies the average frame size before fragmentation.
U32 cmAccPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.12.1.12	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
U32 cmAccPortQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.12.1.10	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 cmAccPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 cmAccPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.6	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
I32 cmAccPortQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.12.1.13	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
TRA cmAccPortQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.12.1.2	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
U32 cmAccPortQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.12.1.11	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 cmAccPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.8	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
cmAccPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.12.1		not-accessible	A conceptual row in the cmAccPortQosShaperTable. These entries represent a Quality of Service Shaper.
I32 cmAccPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.12.1.1	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper.
OPE cmAccPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.12.1.4	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
SEC cmAccPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.12.1.5	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
U32 cmAccPortQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.15	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.
U32 cmAccPortQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.14	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.
U32 cmAccPortQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.17	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.16	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
cmAccPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.12		not-accessible	A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port is in evpl mode and are relevant for traffic in the network to access direction.
I32 cmAccPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.12.1.25	Integer32	read-write	This object specifies the wfq weight value.
U32 cmAccPortQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.12.1.20	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 cmAccPortQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.19	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 cmAccPortQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.18	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 cmAccPortQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.12.1.23	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
U32 cmAccPortQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.22	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 cmAccPortQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.21	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
I32 cmEgressCOS	1.3.6.1.4.1.2544.1.12.4.1.32.1.2	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmEgressCOSIndex	1.3.6.1.4.1.2544.1.12.4.1.32.1.1	Integer32	read-only	The integer index used to uniquely identify this Egress Priority Map Entry
PRI cmEgressOuterTagCtrl	1.3.6.1.4.1.2544.1.12.4.1.32.1.3	PrioMapControlType	read-write	This object defines the behavior of the Priority portion of the frame transmit out. If NONE is selected, the outgoing priority bits are left unchanged. If SWAP is selected, the priority bits are changed by the value specified in the Outer-Tag Priority parameter.
VLA cmEgressOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.32.1.4	VlanPriority	read-write	This object defines the new priority bits to be used, it is available only if Outer-Tag PRIOCTL is set to SWAP.
cmEgressPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.32.1		not-accessible	A conceptual row in the cmEgressPrioMapTable.
cmEgressPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.32		not-accessible	A list of entries corresponding to Egress Priority Mapping for configuration purposes.
ADM cmElineFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.28.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
STR cmElineFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.28.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the Flow.
cmElineFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.28.1		not-accessible	A conceptual row in the cmElineFlowTable. These entries represent an Flow.
NUM cmElineFlowFP1	1.3.6.1.4.1.2544.1.12.4.1.28.1.6	VariablePointer	read-create	This object allows SNMP management entities to provide a flowpoint with the Flow.
NUM cmElineFlowFP2	1.3.6.1.4.1.2544.1.12.4.1.28.1.7	VariablePointer	read-create	This object allows SNMP management entities to provide another flowpoint with the Flow.
I32 cmElineFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.28.1.1	Integer32	read-create	The integer index value corresponding to an Flow.
OPE cmElineFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.28.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
ROW cmElineFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.28.1.9	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmElineFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmElineFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmElineFlowRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC cmElineFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.28.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
STO cmElineFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.28.1.8	StorageType	read-create	The type of storage configured for this entry.
cmElineFlowTable	1.3.6.1.4.1.2544.1.12.4.1.28		not-accessible	A list of entries corresponding to Flows for configuration purposes.
NUM cmEncapFlowPointAssociatedFlowId	1.3.6.1.4.1.2544.1.12.4.1.113.1.3	VariablePointer	read-only	This object provides the association of an Flow with an Encap FlowPoint.
STR cmEncapFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.113.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the FlowPoint.
FLO cmEncapFlowPointCTagControl	1.3.6.1.4.1.2544.1.12.4.1.113.1.5	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3EncapFlowPointCTagVlanId) and priority (f3EncapFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3EncapFlowPointCTagVlanId and f3EncapFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3EncapFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
VLA cmEncapFlowPointCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.113.1.6	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3EncapFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmEncapFlowPointCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.113.1.7	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3EncapFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
T/F cmEncapFlowPointEgressInnerTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.113.1.12	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmEncapFlowPointEgressOuterTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.113.1.11	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
cmEncapFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.113.1		not-accessible	A conceptual row in the cmEncapFlowPointTable. These entries represent an Encap FlowPoint.
cmEncapFlowPointGroup	1.3.6.1.4.1.2544.1.12.4.2.2.54			A collection of objects used to manage the encap flow point entry Group.
I32 cmEncapFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.113.1.1	Integer32	read-create	The integer index value corresponding to an Encap FlowPoint.
NUM cmEncapFlowPointRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.113.1.4	VariablePointer	read-create	This object specifies EoMpls Pw object OID.
NUM cmEncapFlowPointRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.113.1.13	VariablePointer	read-write	This object allows to set priority map profile.
ROW cmEncapFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.113.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmEncapFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmEncapFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmEncapFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
FLO cmEncapFlowPointSTagControl	1.3.6.1.4.1.2544.1.12.4.1.113.1.8	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3EncapFlowPointSTagVlanId) and priority (f3EncapFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3EncapFlowPointSTagVlanId and f3EncapFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3EncapFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
VLA cmEncapFlowPointSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.113.1.9	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3EncapFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmEncapFlowPointSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.113.1.10	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3EncapFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
STO cmEncapFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.113.1.14	StorageType	read-create	The type of storage configured for this entry.
cmEncapFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.113		not-accessible	A list of entries corresponding to Encap FlowPoint for configuration purposes.
T/F cmEthernetAccPortA2NPushPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.85	TruthValue	read-write	This object allows to specify whether cmEthernetAccPortPortVlanId value will be PUSHed on untagged frames or not in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetAccPortA2nSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.115	TruthValue	read-write	This object allows to Enable/Disable the Swapping of Priority Vlan Id in the A2N direction.
ADM cmEthernetAccPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.1.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Access Port.
CMA cmEthernetAccPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.1.1.69	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet Access port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames.
SSM cmEthernetAccPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.93	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Access Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
T/F cmEthernetAccPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.81	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
STR cmEthernetAccPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.3.1.4	DisplayString	read-write	A textual string containing description of cable span.
T/F cmEthernetAccPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.3.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
cmEthernetAccPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.3.1		not-accessible	A conceptual row in the cmEthernetAccPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Access Port.
I32 cmEthernetAccPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.3.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
STR cmEthernetAccPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.3.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
cmEthernetAccPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.3		not-accessible	A list of entries corresponding to Ethernet Access Port Cable Length Benchmark.
ETH cmEthernetAccPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.1.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Access Port.
CMC cmEthernetAccPortCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.2.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
cmEthernetAccPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.2.1		not-accessible	A conceptual row in the cmEthernetAccPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port.
I32 cmEthernetAccPortCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.2.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmEthernetAccPortCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
STR cmEthernetAccPortCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.2.1.3	DisplayString	read-only	This provides description of CPD Filter.
CMC cmEthernetAccPortCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.2.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
I32 cmEthernetAccPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.2.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
MAC cmEthernetAccPortCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
MAC cmEthernetAccPortCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.2.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
I32 cmEthernetAccPortCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.2.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmEthernetAccPortCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
cmEthernetAccPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.2		not-accessible	A list of entries corresponding to Ethernet Access Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
CMC cmEthernetAccPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetAccPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetAccPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetAccPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetAccPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetAccPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetAccPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetAccPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetAccPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
cmEthernetAccPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.13.1		not-accessible	A conceptual row in the cmEthernetAccPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port.
CMC cmEthernetAccPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetAccPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetAccPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetAccPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
I32 cmEthernetAccPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.13.1.1	Integer32	read-only	Unique Index value to access the CPD row.
CMC cmEthernetAccPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetAccPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
MAC cmEthernetAccPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.13.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
CMC cmEthernetAccPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetAccPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetAccPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetAccPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetAccPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetAccPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetAccPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetAccPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetAccPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetAccPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetAccPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetAccPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetAccPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetAccPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetAccPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetAccPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetAccPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetAccPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetAccPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetAccPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetAccPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetAccPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetAccPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetAccPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetAccPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetAccPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
CMC cmEthernetAccPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.49	CmControlProtocolDispType	read-write	PTP untagged frame Disposition type.
CMC cmEthernetAccPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetAccPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
cmEthernetAccPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.13		not-accessible	A list of entries corresponding to Ethernet Access Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device.
CMC cmEthernetAccPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetAccPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetAccPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetAccPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
I32 cmEthernetAccPortDefaultCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.120	Integer32	read-write	The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is supported. This value is assigned to a frame received on a port when: - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame is untagged - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame has a single VLAN tag - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag; and the frame is untagged - the cmEthernetAccPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype - the cmEthernetAccPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype. This attribute has been deprecated and is not supported. The Default COS is determined from the flowpoint's associated Priority Mapping Profle.
T/F cmEthernetAccPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.1.1.96	TruthValue	read-write	This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bit set. In the receive direction, it uses the S-TAG DEI when enabled, else ignores it. The following comment is NOT relevant to OSA8.1.1, since this object is still supported by OSA8.1.1. The object has been deprecated. The respective configuration should be managed by following objects: cmEthernetAccPortRxDeiAction, cmEthernetAccPortTxDeiAction, cmEthernetAccPortRxDeiOuterTagType, cmEthernetAccPortTxDeiOuterTagType.
CMD cmEthernetAccPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.23	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Access Port.
CMD cmEthernetAccPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.25	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Access Port.
CMD cmEthernetAccPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.24	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.19	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.20	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.21	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.22	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Access Port.
STR cmEthernetAccPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.1.1.26	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Access Port.
CMD cmEthernetAccPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.27	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Access Port.
DAT cmEthernetAccPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.1.1.28	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
MAC cmEthernetAccPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.118	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
PHY cmEthernetAccPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
cmEthernetAccPortEntry	1.3.6.1.4.1.2544.1.12.4.1.1.1		not-accessible	A conceptual row in the cmEthernetAccPortTable.
SSM cmEthernetAccPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.92	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Access Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetAccPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
NUM cmEthernetAccPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Access Port. An integer index value used to uniquely identify this Ethernet Access Port.
T/F cmEthernetAccPortIndependentShaperBW	1.3.6.1.4.1.2544.1.12.4.1.1.1.122	TruthValue	read-write	This object describes whether the shaper bw independent.
I32 cmEthernetAccPortIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex. From release 5.6CC zero value becomes valid. The zero value is used in Network Element level objects which contain cmEthernetAccPortIndex in the index which is not-applicable for these objects e.g. Pass-thru Flows, Shapers or Policers.
VLA cmEthernetAccPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.1.1.119	VlanTagType	read-write	Indicates which VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is only applicable on products when Flowpoint Model is supported. inner-vlantag: The inner VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no inner VLAN tag (untagged or single-tagged) will have a COS equal to the default COS of the port. outer-vlantag: The outer VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no outer VLAN tag (untagged) will have a COS equal to the default COS of the port. This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
CME cmEthernetAccPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.1.1.18	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Access Port.
STR cmEthernetAccPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.1.1.38	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.1.1.39	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.1.1.40	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
INT cmEthernetAccPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.1.1.37	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
T/F cmEthernetAccPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.67.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
cmEthernetAccPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.67.1		not-accessible	A conceptual row in the cmEthernetAccPortJdsuExtTable.
cmEthernetAccPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.67		not-accessible	A list of entries corresponding to Ethernet Access Port Facilities for JDSU configuration purposes.
IP cmEthernetAccPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.1.1.123	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
VLA cmEthernetAccPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.67.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
STR cmEthernetAccPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.67.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
T/F cmEthernetAccPortJumboFramesEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.12	TruthValue	read-write	This object allows enabling/disabling jumbo frames support on the Ethernet Access Port. This object is only applicable for Ethernet Access Port on R3.1CM NTU Card.
U32 cmEthernetAccPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.1.1.112	Unsigned32	read-only	Channel number of WDM tunable XFP setting.
T/F cmEthernetAccPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.1.1.111	TruthValue	read-only	Channel number of WDM tunable XFP setting.
OID cmEthernetAccPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.1.1.110	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
T/F cmEthernetAccPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.1.1.45	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
I32 cmEthernetAccPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.1.1.44	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
T/F cmEthernetAccPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.41	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Access Port.
I32 cmEthernetAccPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.1.1.47	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet access port.
T/F cmEthernetAccPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.46	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
CMR cmEthernetAccPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.1.1.48	CmRemoteLinkIds	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet access port. By setting the appropriate bit positions, the Ethernet access port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end.
CMR cmEthernetAccPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.1.1.83	CmRemoteLinkIds	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Access Port.
CML cmEthernetAccPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.1.1.42	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType.
CML cmEthernetAccPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.1.1.43	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled.
CML cmEthernetAccPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.1.1.82	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Access Port's behavior when link loss forwarding trigger events occur on the Network Port. This provides ability to configure per access port LLF behavior.
T/F cmEthernetAccPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.105	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
CML cmEthernetAccPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.1.1.29	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Access Port.
MAC cmEthernetAccPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.104	MacAddress	read-write	This object allows to set Acc Port Destination MAC Address for frame matching when Acc Port Destination MAC Control is enabled.
T/F cmEthernetAccPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.102	TruthValue	read-write	This object allows to Enable/Disable the Acc Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
MAC cmEthernetAccPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.103	MacAddress	read-write	This object allows to set Acc Port Source MAC Address for frame matching when Acc Port Source MAC Control is enabled.
T/F cmEthernetAccPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.101	TruthValue	read-write	This object allows to Enable/Disable the Acc Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
CML cmEthernetAccPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.30	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Access Port.
CMS cmEthernetAccPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.1.1.32	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
IP cmEthernetAccPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.1.1.136	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
T/F cmEthernetAccPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.135	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
ADR cmEthernetAccPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.1.1.138	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
T/F cmEthernetAccPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.137	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
I32 cmEthernetAccPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.1.1.31	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Access Port.
T/F cmEthernetAccPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.114	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Access Port.
CME cmEthernetAccPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.70	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Access port.
CME cmEthernetAccPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.1.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Access Port.
ETH cmEthernetAccPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.1.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Access Port.
ETH cmEthernetAccPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.1.1.113	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Access Port.
CME cmEthernetAccPortMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.65	CmEthernetSvcPortMode	read-write	This object allows specification of whether the Ethernet Access Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offering MAC based services) mode.
I32 cmEthernetAccPortMTU	1.3.6.1.4.1.2544.1.12.4.1.1.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Access Port. The object is made read-write for FSP150CC devices.
T/F cmEthernetAccPortN2APopPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.86	TruthValue	read-write	This object allows to specify whether cmEthernetAccPortPortVlanId value will be POPed in the Network to Access direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetAccPortN2aSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.116	TruthValue	read-write	This object allows to Enable/Disable the Swapping of Priority Vlan Id in the N2A direction.
T/F cmEthernetAccPortN2AVlanTrunkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.84	TruthValue	read-write	This object allows to enable or disable the VLAN trunking on Ethernet Access port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of the access port. This object is only applicable for connection-oriented, evpl service type.
ETH cmEthernetAccPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.1.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Access Port.
CMC cmEthernetAccPortOamAdminDisposition	1.3.6.1.4.1.2544.1.12.4.1.1.1.50	CmControlProtocolDispType	read-write	Ethernet Access Port's EFM OAM Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
CMO cmEthernetAccPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.1.1.75	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
CMO cmEthernetAccPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.1.1.51	CmOamDiscoveryState	read-only	Ethernet Access Port's OAM discovery state.
T/F cmEthernetAccPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.74	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Access Port.
I32 cmEthernetAccPortOamId	1.3.6.1.4.1.2544.1.12.4.1.1.1.49	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
T/F cmEthernetAccPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.53	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port supports interpreting Link Events.
I32 cmEthernetAccPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.1.1.56	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Access Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
CMO cmEthernetAccPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.57	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
T/F cmEthernetAccPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.1.1.54	TruthValue	read-write	This object allows specification of whether the Ethernet Access Port is capable of OAM remote loopback mode.
T/F cmEthernetAccPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.55	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetAccPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.52	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port supports sending variable response OAMPDUs.
T/F cmEthernetAccPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.60	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
MAC cmEthernetAccPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.58	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
I32 cmEthernetAccPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.1.1.63	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
CMO cmEthernetAccPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.64	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
T/F cmEthernetAccPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.1.1.61	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetAccPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.62	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetAccPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.59	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
OPE cmEthernetAccPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.1.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Access Port.
U32 cmEthernetAccPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.1.1.131	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Access Port.
T/F cmEthernetAccPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.1.1.130	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Access Port.
STR cmEthernetAccPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.1.1.34	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.1.1.35	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.1.1.36	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
INT cmEthernetAccPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.1.1.33	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
PCP cmEthernetAccPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.1.1.97	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag.
PCP cmEthernetAccPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.98	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetAccPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmAccPortPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
T/F cmEthernetAccPortPersistentLoopbackControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.134	TruthValue	read-write	This object allows enabling/disabling of Persistent Loopback Control. The loopback configuration parameters do not survive restart as typically maintenance actions are not persist. Setting this attribute to true shall persist the loopback configuration parameters. When it is set to false the loopback configuration parameters shall not survive a restart.
POE cmEthernetAccPortPoEStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.140	PoEStatus	read-only	This object provides the status of Power Over Ethernet Detection.
VLA cmEthernetAccPortPortVlanId	1.3.6.1.4.1.2544.1.12.4.1.1.1.87	VlanId	read-write	This object allows to specify the Ethernet Access Port VLAN Id to PUSH on untagged frames in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled is set to true.
VLA cmEthernetAccPortPortVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.1.1.88	VlanPriority	read-write	This object allows to specify the Ethernet Access Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetAccPortPortVlanId) on untagged frames in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled is set to true.
TOG cmEthernetAccPortPowerdDeviceDetection	1.3.6.1.4.1.2544.1.12.4.1.1.1.139	ToggleValue	read-write	This object allows to manage (enable/disable) Power Over Ethernet Detection.
PRI cmEthernetAccPortPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.89	PriorityMapMode	read-write	This object allows to specify the Ethernet Access Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented, evpl service type.
U32 cmEthernetAccPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.1.1.79	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Access Port. Setting this value to 0 will disable the Q-in-Q override on the Access Port.
T/F cmEthernetAccPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.91	TruthValue	read-write	This object allows to specify whether the Ethernet Access Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetAccPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM cmEthernetAccPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.94	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
RXD cmEthernetAccPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.106	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
DEI cmEthernetAccPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.1.1.108	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
CMC cmEthernetAccPortRxPauseDisposition	1.3.6.1.4.1.2544.1.12.4.1.1.1.67	CmControlProtocolDispType	read-write	This object allows management of RX pause frames on Ethernet Access port. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
T/F cmEthernetAccPortRxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.80	TruthValue	read-write	This object allows to enable/disable the RX PAUSE on the Access Port. This object is not applicable for FSP150CM NTU Card. On NTU Card cmEthernetAccPortRxPauseDisposition object should be used to provision RxPause disposition.
SEC cmEthernetAccPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.1.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Access Port.
SFP cmEthernetAccPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.1.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
DAT cmEthernetAccPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.1.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetAccPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.1.1.133	DisplayString	read-only	This object provides the hardware revision of the SFP.
OID cmEthernetAccPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.1.1.141	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
I32 cmEthernetAccPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.1.1.72	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetAccPortMediaType is fiber.
I32 cmEthernetAccPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.1.1.129	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
SFP cmEthernetAccPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.1.1.73	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetAccPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.1.1.132	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetAccPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.1.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
I32 cmEthernetAccPortSfpReach	1.3.6.1.4.1.2544.1.12.4.1.1.1.71	Integer32	read-only	This object provides the SFP Reach in meters. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetAccPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.1.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetAccPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.1.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
U32 cmEthernetAccPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.1.1.78	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled.
U32 cmEthernetAccPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.1.1.77	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled.
T/F cmEthernetAccPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.76	TruthValue	read-write	This object allows to manage the Access Port Shaping. When enabled, values in cmEthernetAccPortShapedSpeedLo and cmEthernetAccPortShapedSpeedHi are applicable.
T/F cmEthernetAccPortSilentStartControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.128	TruthValue	read-write	Allows enabling/disabling of silent start.
MAC cmEthernetAccPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.99	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
CME cmEthernetAccPortSvcType	1.3.6.1.4.1.2544.1.12.4.1.1.1.66	CmEthernetSvcType	read-write	This object allows specification of whether the Ethernet Access Port provides transparent port based services, or multi-flow VLAN based services.
VLA cmEthernetAccPortSwapPriorityVID	1.3.6.1.4.1.2544.1.12.4.1.1.1.117	VlanId	read-write	This object allows to specify the value of Vlan Id for the Swapping of Priority Vlan Id operation for both the A2N and N2A direction.
T/F cmEthernetAccPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.90	TruthValue	read-write	This object allows to specify whether the Ethernet Access Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
cmEthernetAccPortTable	1.3.6.1.4.1.2544.1.12.4.1.1		not-accessible	A list of entries corresponding to Ethernet Access Port Facilities for configuration purposes.
ETH cmEthernetAccPortTrafficModel	1.3.6.1.4.1.2544.1.12.4.1.1.1.121	EthernetPortTrafficModel	read-write	The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model.
SSM cmEthernetAccPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.95	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
TXD cmEthernetAccPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.107	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
DEI cmEthernetAccPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.1.1.109	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
T/F cmEthernetAccPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.68	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet Access port.
I32 cmEthernetAccPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.125	Integer32	read-write	This object used to specify the wfq group cos value.
U32 cmEthernetAccPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.1.1.127	Unsigned32	read-write	This object used to specify the wfq group eir high 32 bits value.
U32 cmEthernetAccPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.1.1.126	Unsigned32	read-write	This object used to specify the wfq group eir low 32 bits value.
I32 cmEthernetAccPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.124	Integer32	read-write	This object used to specify the wfq segmentation cos value.
XGE cmEthernetAccPortXgePhyType	1.3.6.1.4.1.2544.1.12.4.1.1.1.100	XgePhyType	read-write	This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps. This attribute is only applicable for ports configured to work at speed-10G-full. For other speeds the value of this object must be 'not-applicable' and cannot be changed.
NUM cmEthernetFlowPointAssociatedCpdProfile	1.3.6.1.4.1.2544.1.12.4.1.36.1.2	VariablePointer	read-write	An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.
cmEthernetFlowPointCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.36.1		not-accessible	A conceptual row in the cmEthernetFlowPointCpdTable.
I32 cmEthernetFlowPointCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.36.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
cmEthernetFlowPointCpdTable	1.3.6.1.4.1.2544.1.12.4.1.36		not-accessible	A list of entries corresponding to Ethernet Flow Point CPD for configuration purposes.
ADM cmEthernetMgmtPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.9.1.3	AdminState	read-write	This object represents the Administrative State of the Ethernet Management Port.
ETH cmEthernetMgmtPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.9.1.7	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Management Port.
PHY cmEthernetMgmtPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.9.1.2	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
cmEthernetMgmtPortEntry	1.3.6.1.4.1.2544.1.12.4.1.9.1		not-accessible	A conceptual row in the cmEthernetMgmtPortTable.
I32 cmEthernetMgmtPortIndex	1.3.6.1.4.1.2544.1.12.4.1.9.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Management Port within a card. Note that each Ethernet Management Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetMgmtPortIndex.
CME cmEthernetMgmtPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.9.1.10	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Management port.
CME cmEthernetMgmtPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.9.1.9	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Management Port.
ETH cmEthernetMgmtPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.9.1.11	EthernetMediaType	read-only	This object represents the type of Ethernet Media on the Ethernet Management Port.
I32 cmEthernetMgmtPortMTU	1.3.6.1.4.1.2544.1.12.4.1.9.1.6	Integer32	read-only	This object provides the MTU on the Ethernet Management Port.
ETH cmEthernetMgmtPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.9.1.8	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Management Port.
OPE cmEthernetMgmtPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.9.1.4	OperationalState	read-only	This object represents the Operational State of the Ethernet Management Port.
SEC cmEthernetMgmtPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.9.1.5	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Management Port.
cmEthernetMgmtPortTable	1.3.6.1.4.1.2544.1.12.4.1.9		not-accessible	A list of entries corresponding to Ethernet Management Port Facilities for configuration purposes.
ADM cmEthernetNetPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.7.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Network Port.
CMA cmEthernetNetPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.7.1.67	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet Network port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames. This object is not applicable for FSP150CC Release 4.1 products.
NUM cmEthernetNetPortAssociatedTdmEntity	1.3.6.1.4.1.2544.1.12.4.1.56.1.2	VariablePointer	read-write	This object describes the associated working path of TDM network port.
SSM cmEthernetNetPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.84	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Network Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
T/F cmEthernetNetPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.80	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
STR cmEthernetNetPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.19.1.4	DisplayString	read-write	A textual string containing description of cable span.
T/F cmEthernetNetPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.19.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
cmEthernetNetPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.19.1		not-accessible	A conceptual row in the cmEthernetNetPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Network Port.
I32 cmEthernetNetPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.19.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
STR cmEthernetNetPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.19.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
cmEthernetNetPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.19		not-accessible	A list of entries corresponding to Ethernet Network Port Cable Length Benchmark.
ETH cmEthernetNetPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.7.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Network Port.
CMC cmEthernetNetPortCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.8.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
cmEthernetNetPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.8.1		not-accessible	A conceptual row in the cmEthernetNetPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
I32 cmEthernetNetPortCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.8.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmEthernetNetPortCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
STR cmEthernetNetPortCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.8.1.3	DisplayString	read-only	This provides description of CPD Filter.
CMC cmEthernetNetPortCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.8.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
I32 cmEthernetNetPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.8.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
MAC cmEthernetNetPortCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
MAC cmEthernetNetPortCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.8.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
I32 cmEthernetNetPortCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.8.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmEthernetNetPortCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
cmEthernetNetPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.8		not-accessible	A list of entries corresponding to Ethernet Network Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
CMC cmEthernetNetPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetNetPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetNetPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetNetPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetNetPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetNetPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetNetPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetNetPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetNetPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
cmEthernetNetPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.15.1		not-accessible	A conceptual row in the cmEthernetNetPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
CMC cmEthernetNetPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetNetPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetNetPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetNetPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
I32 cmEthernetNetPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.15.1.1	Integer32	read-only	Unique Index value to access the CPD row.
CMC cmEthernetNetPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetNetPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
MAC cmEthernetNetPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.15.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
CMC cmEthernetNetPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetNetPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetNetPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetNetPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetNetPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetNetPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetNetPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetNetPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetNetPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetNetPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetNetPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetNetPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetNetPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetNetPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetNetPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetNetPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetNetPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetNetPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetNetPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetNetPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetNetPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetNetPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetNetPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetNetPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetNetPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetNetPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
CMC cmEthernetNetPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.49	CmControlProtocolDispType	read-write	PTP non forwarding untagged frame Disposition type.
CMC cmEthernetNetPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetNetPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
cmEthernetNetPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.15		not-accessible	A list of entries corresponding to Ethernet Network Port Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices.
CMC cmEthernetNetPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetNetPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetNetPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetNetPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
I32 cmEthernetNetPortDefaultCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.109	Integer32	read-write	The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is supported. This value is assigned to a frame received on a port when: - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame is untagged - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame has a single VLAN tag - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag; and the frame is untagged - the cmEthernetNetPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype - the cmEthernetNetPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype. This attribute has been deprecated and is not supported. The Default COS is determined from the flowpoint's associated Priority Mapping Profle.
T/F cmEthernetNetPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.7.1.88	TruthValue	read-write	This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bit set. In the receive direction, it uses the S-TAG DEI when enabled, else ignores it. The following comment is NOT relevant to OSA8.1.1, since this object is still supported by OSA8.1.1. The object has been deprecated. The respective configuration should be managed by following objects: cmEthernetNetPortRxDeiAction, cmEthernetNetPortTxDeiAction, cmEthernetNetPortRxDeiOuterTagType, cmEthernetNetPortTxDeiOuterTagType.
CMD cmEthernetNetPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.23	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Network Port.
CMD cmEthernetNetPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.25	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Network Port.
CMD cmEthernetNetPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.24	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.19	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.20	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.21	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.22	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Network Port.
STR cmEthernetNetPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.7.1.26	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Network Port.
CMD cmEthernetNetPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.27	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Access Port.
DAT cmEthernetNetPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.7.1.28	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
MAC cmEthernetNetPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.107	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
PCP cmEthernetNetPortEncapPcpDEEncodingType	1.3.6.1.4.1.2544.1.12.4.1.7.1.116	PcpDEEncType	read-write	This is a port level control the mode of drop eligibility encoding in PCP bits of the VLAN tag in encapsulation header.
PCP cmEthernetNetPortEncapPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.117	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortEncapPcpDEEncodingType is of type 7p1d, 6p2d, 5p3d, the cmNetPortEncapPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PHY cmEthernetNetPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
cmEthernetNetPortEntry	1.3.6.1.4.1.2544.1.12.4.1.7.1		not-accessible	A conceptual row in the cmEthernetNetPortTable.
PCP cmEthernetNetPortExpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.112	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in exp bits of the VLAN tag.
PCP cmEthernetNetPortExpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.113	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortExpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortExpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
SSM cmEthernetNetPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.83	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Network Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetNetPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
cmEthernetNetPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.56.1		not-accessible	A conceptual row in the cmEthernetNetPortExtTable.
cmEthernetNetPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.56		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes.
NUM cmEthernetNetPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Network Port. An integer index value used to uniquely identify this Ethernet Network Port.
T/F cmEthernetNetPortIndependentShaperBW	1.3.6.1.4.1.2544.1.12.4.1.7.1.111	TruthValue	read-write	This object describes the shaper BW whether independent.
I32 cmEthernetNetPortIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Network Port within a card. Note that each Ethernet Network Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex.
VLA cmEthernetNetPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.7.1.108	VlanTagType	read-write	Indicates the VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is only applicable on products when Flowpoint Model is supported. inner-vlantag: The inner VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no inner VLAN tag (untagged or single-tagged) will have a COS equal to the default COS of the port. outer-vlantag: The outer VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no outer VLAN tag (untagged) will have a COS equal to the default COS of the port. This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
CME cmEthernetNetPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.7.1.18	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Network Port.
STR cmEthernetNetPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.7.1.38	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.7.1.39	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.7.1.40	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
INT cmEthernetNetPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.7.1.37	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
T/F cmEthernetNetPortInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.56.1.3	TruthValue	read-write	This object allows to insert AIS out from TDM network port when it is in maintenance state.
PCP cmEthernetNetPortIpPrecDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.114	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in Ip Prec bits of the VLAN tag.
PCP cmEthernetNetPortIpPrecDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.115	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Ip Prec Drop Eligibility Pairs. When the cmEthernetNetPortIpPrecDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortIpPrecDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
T/F cmEthernetNetPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.68.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
cmEthernetNetPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.68.1		not-accessible	A conceptual row in the cmEthernetNetPortJdsuExtTable.
cmEthernetNetPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.68		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for JDSU configuration purposes.
IP cmEthernetNetPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.7.1.118	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
VLA cmEthernetNetPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.68.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
STR cmEthernetNetPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.68.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
T/F cmEthernetNetPortJumboFramesEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.12	TruthValue	read-write	This object allows enabling/disabling jumbo frames support on the Ethernet Network Port. This object is only applicable for Ethernet Network Port on R3.1CM NTU Card.
U32 cmEthernetNetPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.7.1.104	Unsigned32	read-only	Channel number of WDM tunable XFP setting.
T/F cmEthernetNetPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.7.1.103	TruthValue	read-only	Channel number of WDM tunable XFP setting.
OID cmEthernetNetPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.7.1.102	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
T/F cmEthernetNetPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.7.1.45	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
I32 cmEthernetNetPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.7.1.44	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
T/F cmEthernetNetPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.41	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Network Port.
I32 cmEthernetNetPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.7.1.47	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet Network port.
T/F cmEthernetNetPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.46	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
CMR cmEthernetNetPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.7.1.48	CmRemoteLinkIds	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet Network port. By setting the appropriate bit positions, the Ethernet Network port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end.
CMR cmEthernetNetPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.7.1.79	CmRemoteLinkIds	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Network Port.
CML cmEthernetNetPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.7.1.42	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetNetPortLinkLossFwdEnabled is enabled. This object is only valid for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType.
CML cmEthernetNetPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.7.1.43	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled.
CML cmEthernetNetPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.7.1.78	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Network Port's behavior when link loss forwarding trigger events occur on the Access Port.
T/F cmEthernetNetPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.97	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
CML cmEthernetNetPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.7.1.29	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Network Port.
MAC cmEthernetNetPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.96	MacAddress	read-write	This object allows to set Net Port Destination MAC Address for frame matching when Net Port Destination MAC Control is enabled.
T/F cmEthernetNetPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.94	TruthValue	read-write	This object allows to Enable/Disable the Net Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
MAC cmEthernetNetPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.95	MacAddress	read-write	This object allows to set Net Port Source MAC Address for frame matching when Net Port Source MAC Control is enabled.
T/F cmEthernetNetPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.93	TruthValue	read-write	This object allows to Enable/Disable the Net Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
CML cmEthernetNetPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.30	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Network Port.
CMS cmEthernetNetPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.7.1.32	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
IP cmEthernetNetPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.7.1.131	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
T/F cmEthernetNetPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.130	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
ADR cmEthernetNetPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.7.1.133	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
T/F cmEthernetNetPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.132	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
I32 cmEthernetNetPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.7.1.31	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Network Port.
T/F cmEthernetNetPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.106	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Network Port.
CME cmEthernetNetPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.68	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Network port.
CME cmEthernetNetPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.7.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Network Port.
ETH cmEthernetNetPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.7.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Network Port.
ETH cmEthernetNetPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.7.1.105	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Network Port.
I32 cmEthernetNetPortMTU	1.3.6.1.4.1.2544.1.12.4.1.7.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Network Port.
ETH cmEthernetNetPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.7.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Network Port.
CMC cmEthernetNetPortOamAdminDisposition	1.3.6.1.4.1.2544.1.12.4.1.7.1.50	CmControlProtocolDispType	read-write	Ethernet Network Port's EFM OAM Administrative Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
CMO cmEthernetNetPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.7.1.73	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
CMO cmEthernetNetPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.7.1.51	CmOamDiscoveryState	read-only	Ethernet Network Port's OAM discovery state.
T/F cmEthernetNetPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.72	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Network Port.
I32 cmEthernetNetPortOamId	1.3.6.1.4.1.2544.1.12.4.1.7.1.49	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
T/F cmEthernetNetPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.53	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port supports interpreting Link Events.
I32 cmEthernetNetPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.7.1.56	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Network Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
CMO cmEthernetNetPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.57	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
T/F cmEthernetNetPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.7.1.54	TruthValue	read-write	This object allows specification of whether the Ethernet Network Port is capable of OAM remote loopback mode.
T/F cmEthernetNetPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.55	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetNetPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.52	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port supports sending variable response OAMPDUs.
T/F cmEthernetNetPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.60	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
MAC cmEthernetNetPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.58	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
I32 cmEthernetNetPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.7.1.63	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
CMO cmEthernetNetPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.64	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
T/F cmEthernetNetPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.7.1.61	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetNetPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.62	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetNetPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.59	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
OPE cmEthernetNetPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.7.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Network Port.
U32 cmEthernetNetPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.7.1.126	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Network Port.
T/F cmEthernetNetPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.7.1.125	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Network Port.
STR cmEthernetNetPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.7.1.34	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.7.1.35	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.7.1.36	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
INT cmEthernetNetPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.7.1.33	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
PCP cmEthernetNetPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.89	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag.
PCP cmEthernetNetPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.90	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
T/F cmEthernetNetPortPersistentLoopbackControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.129	TruthValue	read-write	This object allows enabling/disabling of Persistent Loopback Control. The loopback configuration parameters do not survive restart as typically maintenance actions are not persist. Setting this attribute to true shall persist the loopback configuration parameters. When it is set to false the loopback configuration parameters shall not survive a restart.
PPP cmEthernetNetPortPppoeConnStatus	1.3.6.1.4.1.2544.1.12.4.1.103.1.15	PPPoEConnectionStatus	read-only	This object provides the connection status of pppoe connection.
T/F cmEthernetNetPortPppoeInnerVlanControl	1.3.6.1.4.1.2544.1.12.4.1.103.1.5	TruthValue	read-write	This object specify inner vlan whether enabled.
U32 cmEthernetNetPortPppoeInnerVlanEtherType	1.3.6.1.4.1.2544.1.12.4.1.103.1.6	Unsigned32	read-write	This object specify inner vlan ether type value.
VLA cmEthernetNetPortPppoeInnerVlanId	1.3.6.1.4.1.2544.1.12.4.1.103.1.7	VlanId	read-write	This object specify vlan id of inner tag.
VLA cmEthernetNetPortPppoeInnerVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.103.1.8	VlanPriority	read-write	This object specify vlan priority of inner tag.
U32 cmEthernetNetPortPppoeLcpKeepAlivePeriod	1.3.6.1.4.1.2544.1.12.4.1.103.1.10	Unsigned32	read-write	The service name requested.
U32 cmEthernetNetPortPppoeLcpRetryThreshold	1.3.6.1.4.1.2544.1.12.4.1.103.1.11	Unsigned32	read-write	This object specify the lcp retry threshold.
T/F cmEthernetNetPortPppoeOuterVlanControl	1.3.6.1.4.1.2544.1.12.4.1.103.1.1	TruthValue	read-write	This object specify outer vlan whether enabled.
U32 cmEthernetNetPortPppoeOuterVlanEtherType	1.3.6.1.4.1.2544.1.12.4.1.103.1.2	Unsigned32	read-write	This object specify outer vlan ether type value.
VLA cmEthernetNetPortPppoeOuterVlanId	1.3.6.1.4.1.2544.1.12.4.1.103.1.3	VlanId	read-write	This object specify vlan id of outer tag.
VLA cmEthernetNetPortPppoeOuterVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.103.1.4	VlanPriority	read-write	This object specify vlan priority of outer tag.
cmEthernetNetPortPppoeParamEntry	1.3.6.1.4.1.2544.1.12.4.1.103.1		not-accessible	A conceptual row in the cmEthernetNetPortPppoeParamTable.
cmEthernetNetPortPppoeParamTable	1.3.6.1.4.1.2544.1.12.4.1.103		not-accessible	A list of entries corresponding to Ethernet Network Port PPPoE Parameters for configuration purposes.
STR cmEthernetNetPortPppoeRxAcName	1.3.6.1.4.1.2544.1.12.4.1.103.1.12	DisplayString	read-only	The ac name received.
STR cmEthernetNetPortPppoeRxServiceName	1.3.6.1.4.1.2544.1.12.4.1.103.1.13	DisplayString	read-only	The service names received.
STR cmEthernetNetPortPppoeServiceName	1.3.6.1.4.1.2544.1.12.4.1.103.1.9	DisplayString	read-write	The service name requested.
U32 cmEthernetNetPortPppoeSessionId	1.3.6.1.4.1.2544.1.12.4.1.103.1.14	Unsigned32	read-only	pppoe session id.
PRI cmEthernetNetPortPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.87	PriorityMapMode	read-only	This object provides the Priority Mapping Mode used for classification of frames.
U32 cmEthernetNetPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.7.1.77	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Network Port. Setting this value to 0 will disable the Q-in-Q override on the Network Port.
T/F cmEthernetNetPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.82	TruthValue	read-write	This object allows to specify whether the Ethernet Network Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetNetPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM cmEthernetNetPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.85	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
RXD cmEthernetNetPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.98	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
DEI cmEthernetNetPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.7.1.100	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
CMC cmEthernetNetPortRxPauseDisposition	1.3.6.1.4.1.2544.1.12.4.1.7.1.65	CmControlProtocolDispType	read-write	This object allows enabling/disabling receive pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products.
SEC cmEthernetNetPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.7.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Network Port.
SFP cmEthernetNetPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.7.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
DAT cmEthernetNetPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.7.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.7.1.128	DisplayString	read-only	This object provides the hardware revision of the SFP.
OID cmEthernetNetPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.7.1.134	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
I32 cmEthernetNetPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.7.1.70	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetNetPortMediaType is fiber.
I32 cmEthernetNetPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.7.1.124	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
SFP cmEthernetNetPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.7.1.71	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.7.1.127	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetNetPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.7.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
I32 cmEthernetNetPortSfpReach	1.3.6.1.4.1.2544.1.12.4.1.7.1.69	Integer32	read-only	This object provides the SFP Reach in meters. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.7.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.7.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
U32 cmEthernetNetPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.7.1.76	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.
U32 cmEthernetNetPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.7.1.75	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.
T/F cmEthernetNetPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.74	TruthValue	read-write	This object allows to manage the Network Port Shaping. When enabled, values in cmEthernetNetPortShapedSpeedLo and cmEthernetNetPortShapedSpeedHi are applicable.
T/F cmEthernetNetPortSilentStartControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.123	TruthValue	read-write	Allows enabling/disabling of silent start.
MAC cmEthernetNetPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.91	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
T/F cmEthernetNetPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.81	TruthValue	read-write	This object allows to specify whether the Ethernet Network Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
cmEthernetNetPortTable	1.3.6.1.4.1.2544.1.12.4.1.7		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes.
GFP cmEthernetNetPortTDMEncapsulation	1.3.6.1.4.1.2544.1.12.4.1.56.1.1	GFPEncapsulationType	read-write	This object describes the GFP Encapsulation type of the TDM network port.
ETH cmEthernetNetPortTrafficModel	1.3.6.1.4.1.2544.1.12.4.1.7.1.110	EthernetPortTrafficModel	read-write	The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model.
SSM cmEthernetNetPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.86	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
TXD cmEthernetNetPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.99	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
DEI cmEthernetNetPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.7.1.101	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
T/F cmEthernetNetPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.66	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products.
I32 cmEthernetNetPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.120	Integer32	read-write	This object is used to specify the wfq group COS value.
U32 cmEthernetNetPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.7.1.122	Unsigned32	read-write	This object is used to specify the wfq group eir high 32 bits value.
U32 cmEthernetNetPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.7.1.121	Unsigned32	read-write	This object is used to specify the wfq group eir low 32 bits value.
I32 cmEthernetNetPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.119	Integer32	read-write	This object is used to specify the wfq segmentation COS value.
U32 cmEthernetNetPortXdslActualLinkRateDownStream	1.3.6.1.4.1.2544.1.12.4.1.104.1.9	Unsigned32	read-only	Actual link rate downstream.
U32 cmEthernetNetPortXdslActualLinkRateUpStream	1.3.6.1.4.1.2544.1.12.4.1.104.1.8	Unsigned32	read-only	Actual link rate upstream.
XDS cmEthernetNetPortXdslAnnex	1.3.6.1.4.1.2544.1.12.4.1.104.1.13	XDSLAnnex	read-only	Annex version after handshake.
T/F cmEthernetNetPortXdslBitSwapEnabled	1.3.6.1.4.1.2544.1.12.4.1.104.1.3	TruthValue	read-write	Enable/disable bitswap.
XDS cmEthernetNetPortXdslCarrierSet	1.3.6.1.4.1.2544.1.12.4.1.104.1.11	XDSLCarrierSet	read-write	Specify the carrier set.
T/F cmEthernetNetPortXdslConnControl	1.3.6.1.4.1.2544.1.12.4.1.104.1.1	TruthValue	read-write	This object enable/disable xdsl link.
XDS cmEthernetNetPortXdslControlChannel	1.3.6.1.4.1.2544.1.12.4.1.104.1.10	XDSLControlChannel	read-write	Actual link rate downstream.
VDS cmEthernetNetPortXdslCurVdslProfile	1.3.6.1.4.1.2544.1.12.4.1.104.1.7	VDSLProfileField	read-only	Selected vdsl profile.
U32 cmEthernetNetPortXdslDsAttainableRate	1.3.6.1.4.1.2544.1.12.4.1.104.1.20	Unsigned32	read-only	Attainable link rate downstream.
I32 cmEthernetNetPortXdslDsLineAttenuation	1.3.6.1.4.1.2544.1.12.4.1.104.1.17	Integer32	read-only	Downstream line attenuation.
I32 cmEthernetNetPortXdslDsSignalAttenuation	1.3.6.1.4.1.2544.1.12.4.1.104.1.16	Integer32	read-only	Downstream signal attenuation.
I32 cmEthernetNetPortXdslDsSNRMargin	1.3.6.1.4.1.2544.1.12.4.1.104.1.14	Integer32	read-only	Downstream SNR margin.
I32 cmEthernetNetPortXdslDsTxPower	1.3.6.1.4.1.2544.1.12.4.1.104.1.18	Integer32	read-only	Downstream transmit power.
T/F cmEthernetNetPortXdslGvectorEnabled	1.3.6.1.4.1.2544.1.12.4.1.104.1.4	TruthValue	read-write	Enable/disable G.vector.
XDS cmEthernetNetPortXdslMode	1.3.6.1.4.1.2544.1.12.4.1.104.1.12	XDSLMode	read-only	Xdsl mode after handshake.
XDS cmEthernetNetPortXdslModulationMode	1.3.6.1.4.1.2544.1.12.4.1.104.1.2	XDSLModulationMode	read-write	Xdsl modulation.
cmEthernetNetPortXdslParamEntry	1.3.6.1.4.1.2544.1.12.4.1.104.1		not-accessible	A conceptual row in the cmEthernetNetPortXdslParamTable.
cmEthernetNetPortXdslParamTable	1.3.6.1.4.1.2544.1.12.4.1.104		not-accessible	A list of entries corresponding to Ethernet Network Port XDSL Parameters for configuration purposes.
XDS cmEthernetNetPortXdslStatus	1.3.6.1.4.1.2544.1.12.4.1.104.1.6	XDSLStatus	read-only	Xdsl link status.
U32 cmEthernetNetPortXdslUsAttainableRate	1.3.6.1.4.1.2544.1.12.4.1.104.1.21	Unsigned32	read-only	attainable link rate upstream.
I32 cmEthernetNetPortXdslUsSNRMargin	1.3.6.1.4.1.2544.1.12.4.1.104.1.15	Integer32	read-only	Upstream SNR margin.
I32 cmEthernetNetPortXdslUsTxPower	1.3.6.1.4.1.2544.1.12.4.1.104.1.19	Integer32	read-only	Upstream transmit power.
VDS cmEthernetNetPortXdslVdslProfile	1.3.6.1.4.1.2544.1.12.4.1.104.1.5	VDSLProfileFields	read-write	Selected vdsl profile.
XGE cmEthernetNetPortXgePhyType	1.3.6.1.4.1.2544.1.12.4.1.7.1.92	XgePhyType	read-write	This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps. This attribute is only applicable for ports configured to work at speed-10G-full. For other speeds the value of this object must be 'not-applicable' and cannot be changed.
ADM cmEthernetTrafficPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.27.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Port.
CMA cmEthernetTrafficPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.27.1.59	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames.
NUM cmEthernetTrafficPortAssociatedCpdProfile	1.3.6.1.4.1.2544.1.12.4.1.35.1.2	VariablePointer	read-write	An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.
SSM cmEthernetTrafficPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.77	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port TransmitQL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
T/F cmEthernetTrafficPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.105	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
T/F cmEthernetTrafficPortBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.6	TruthValue	read-write	Whether broadcast packets need be limited per port.
U32 cmEthernetTrafficPortBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.8	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmEthernetTrafficPortBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmEthernetTrafficPortBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.7	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmEthernetTrafficPortBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
NUM cmEthernetTrafficPortBwResourcePort	1.3.6.1.4.1.2544.1.12.4.1.27.1.145	VariablePointer	read-write	Specifies a port whose bandwidth resources will be used. This object is applicable only for VM Server ports.
STR cmEthernetTrafficPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.65.1.4	DisplayString	read-write	A textual string containing description of cable span.
T/F cmEthernetTrafficPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.65.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
cmEthernetTrafficPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.65.1		not-accessible	A conceptual row in the cmEthernetTrafficPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Traffic Port.
I32 cmEthernetTrafficPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.65.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
STR cmEthernetTrafficPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.65.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
cmEthernetTrafficPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.65		not-accessible	A list of entries corresponding to Ethernet Traffic Port Cable Length Benchmark.
T/F cmEthernetTrafficPortCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.9	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
U32 cmEthernetTrafficPortCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.11	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
U32 cmEthernetTrafficPortCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.10	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
ETH cmEthernetTrafficPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.27.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Port.
cmEthernetTrafficPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.35.1		not-accessible	A conceptual row in the cmEthernetTrafficPortCpdTable.
I32 cmEthernetTrafficPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.35.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
cmEthernetTrafficPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.35		not-accessible	A list of entries corresponding to Ethernet Port CPD for configuration purposes.
CMC cmEthernetTrafficPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetTrafficPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetTrafficPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetTrafficPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetTrafficPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetTrafficPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetTrafficPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetTrafficPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
cmEthernetTrafficPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.97.1		not-accessible	A conceptual row in the cmEthernetTrafficPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Traffic Port.
CMC cmEthernetTrafficPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetTrafficPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetTrafficPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetTrafficPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
I32 cmEthernetTrafficPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.97.1.1	Integer32	read-only	Unique Index value to access the CPD row.
CMC cmEthernetTrafficPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetTrafficPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
MAC cmEthernetTrafficPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.97.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
CMC cmEthernetTrafficPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetTrafficPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetTrafficPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetTrafficPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetTrafficPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetTrafficPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetTrafficPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetTrafficPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetTrafficPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
CMC cmEthernetTrafficPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.49	CmControlProtocolDispType	read-write	PTP untagged frame Disposition type.
CMC cmEthernetTrafficPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetTrafficPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
cmEthernetTrafficPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.97		not-accessible	A list of entries corresponding to Ethernet Traffic Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device.
CMC cmEthernetTrafficPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetTrafficPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetTrafficPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetTrafficPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
T/F cmEthernetTrafficPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.27.1.91	TruthValue	read-write	This object describes whether use DEI bit in S-tag to recognize Drop Eligibility Parameter for ingress S-tag packets or Set DEI bit for egress S-tag Packets. This object is still supported by OSA8.1.1
TRA cmEthernetTrafficPortDeleteEntitiesAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.106	TrafficPortDeleteEntitiesAction	read-write	This object allows to delete esa entities relate this port and Cfm entities relate this port.
CMD cmEthernetTrafficPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.99	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.101	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.100	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.95	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.96	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.97	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.98	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Traffic Port.
STR cmEthernetTrafficPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.27.1.102	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.103	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Traffic Port.
DAT cmEthernetTrafficPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.104	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
MAC cmEthernetTrafficPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.124	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
T/F cmEthernetTrafficPortEgressPopPriorityVidEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.68	TruthValue	read-write	This object defines the egress PopPriorityVid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped back to VID=0. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortEgressSwapPriorityVIDEnabled
T/F cmEthernetTrafficPortEgressPopPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.67	TruthValue	read-write	This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be POPed in the egress direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortEgressSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.126	TruthValue	read-write	This object defines the egress Swap Priority Vid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped back to VID=0.
T/F cmEthernetTrafficPortEgressVlanTrunkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.65	TruthValue	read-write	This object allows to enable or disable the VLAN trunking on Ethernet port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of the port. This object is only applicable for connection-oriented, evpl service type.
PHY cmEthernetTrafficPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
cmEthernetTrafficPortEntry	1.3.6.1.4.1.2544.1.12.4.1.27.1		not-accessible	A conceptual row in the cmEthernetTrafficPortTable.
PCP cmEthernetTrafficPortExpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.27.1.128	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in exp bits of the VLAN tag.
PCP cmEthernetTrafficPortExpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.129	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetTrafficPortExpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmEthernetTrafficPortExpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
SSM cmEthernetTrafficPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.76	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
cmEthernetTrafficPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.52.1		not-accessible	A conceptual row in the cmEthernetTrafficPortExtTable.
cmEthernetTrafficPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.52		not-accessible	A list of entries corresponding to Ethernet Facilities for configuration purposes.
cmEthernetTrafficPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.27			A collection of objects used to manage the traffic port entry Group.
NUM cmEthernetTrafficPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Port. An integer index value used to uniquely identify this Ethernet Port.
I32 cmEthernetTrafficPortIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Port within a card. Note that each Ethernet Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex.
VLA cmEthernetTrafficPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.27.1.73	VlanTagType	read-create	This object is used to specify whether the EthernetTrafficPort uses the inner-tag or the outer-tag in determining the COS (Class of Service). This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
T/F cmEthernetTrafficPortIngressPopPriorityVidEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.110	TruthValue	read-write	This object defines the Ingress PopPriorityVid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortIngressSwapPriorityVIDEnabled
PRI cmEthernetTrafficPortIngressPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.72	PriorityMapMode	read-write	This object allows to specify the Ethernet Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortIngressPushPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.66	TruthValue	read-write	This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be PUSHed on untagged frames or not in the ingress direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortIngressSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.125	TruthValue	read-write	This object defines the Ingress Swap Priority Vid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID.
CME cmEthernetTrafficPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.27.1.94	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Traffic Port.
STR cmEthernetTrafficPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.27.1.85	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.27.1.86	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.27.1.87	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
INT cmEthernetTrafficPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.27.1.84	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled
T/F cmEthernetTrafficPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.94.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
cmEthernetTrafficPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.94.1		not-accessible	A conceptual row in the cmEthernetTrafficPortJdsuExtTable.
cmEthernetTrafficPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.43			A collection of objects used to manage the F3 Ethernet Traffic Port JDSU extense function.
cmEthernetTrafficPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.94		not-accessible	A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes.
T/F cmEthernetTrafficPortJdsuLoopbackEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.108	TruthValue	read-write	This object allows to enable or disable jdsu loopback on this port. Note: This object is deprecated.
IP cmEthernetTrafficPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.27.1.130	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
VLA cmEthernetTrafficPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.94.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
VLA cmEthernetTrafficPortJdsuLoopbackVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.109	VlanId	read-only	This object allows to set the jdsu loopback vlan. if status is jdsu-terminal-port-tailend(19) or jdsu-facility-port-tailend(21), then VID is 0 means not applicable. Note: This object is deprecated.
STR cmEthernetTrafficPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.94.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
U32 cmEthernetTrafficPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.90	Unsigned32	read-only	This object describes this module's frequency, and the step is 1GHZ.
T/F cmEthernetTrafficPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.27.1.89	TruthValue	read-only	This object means this module whether tunnable.
OID cmEthernetTrafficPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.88	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
T/F cmEthernetTrafficPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.27.1.33	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
I32 cmEthernetTrafficPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.27.1.32	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
T/F cmEthernetTrafficPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.29	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Port.
I32 cmEthernetTrafficPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.27.1.35	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet port.
T/F cmEthernetTrafficPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.34	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
STR cmEthernetTrafficPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.27.1.36	DisplayString	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet port. The Ethernet port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end. Input format allows multiple Remote Link Ids seperated by comma (e.g. 1,2,3,10,20...). Number range is product-specific (for EGX8.1, max value is 554). Empty string clears the configuration.
STR cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.27.1.38	DisplayString	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Ethernet Port.
CML cmEthernetTrafficPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.27.1.30	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled.
CML cmEthernetTrafficPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.27.1.31	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled.
CML cmEthernetTrafficPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.27.1.37	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Ethernet Port's behavior when link loss forwarding trigger events occur on the Port. This provides ability to configure per Ethernet port LLF behavior.
T/F cmEthernetTrafficPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.121	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
CML cmEthernetTrafficPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.27.1.21	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Port.
MAC cmEthernetTrafficPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.120	MacAddress	read-write	This object allows to set Traffic Port Destination MAC Address for frame matching when Traffic Port Destination MAC Control is enabled.
T/F cmEthernetTrafficPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.118	TruthValue	read-write	This object allows to Enable/Disable the Traffic Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
MAC cmEthernetTrafficPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.119	MacAddress	read-write	This object allows to set Traffic Port Source MAC Address for frame matching when Traffic Port Source MAC Control is enabled.
T/F cmEthernetTrafficPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.117	TruthValue	read-write	This object allows to Enable/Disable the Traffic Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
CML cmEthernetTrafficPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.22	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Port.
CMS cmEthernetTrafficPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.27.1.24	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
IP cmEthernetTrafficPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.27.1.149	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
T/F cmEthernetTrafficPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.148	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
ADR cmEthernetTrafficPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.27.1.151	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
T/F cmEthernetTrafficPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.150	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
I32 cmEthernetTrafficPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.23	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Port.
T/F cmEthernetTrafficPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.123	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Traffic Port.
CML cmEthernetTrafficPortLpbkConfig	1.3.6.1.4.1.2544.1.12.4.1.69.1.8	CmLoopbackType	read-write	This object represent the vlan loopback action.
cmEthernetTrafficPortLpbkEntry	1.3.6.1.4.1.2544.1.12.4.1.69.1		not-accessible	A conceptual row in the cmEthernetTrafficPortLpbkTable. These entries represent Vlan loopback on the Ethernet Traffic Port.
I32 cmEthernetTrafficPortLpbkIndex	1.3.6.1.4.1.2544.1.12.4.1.69.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this vlan loopback entry.
T/F cmEthernetTrafficPortLpbkInnerVlanEnabled	1.3.6.1.4.1.2544.1.12.4.1.69.1.2	TruthValue	read-write	This object represent the inner vlan whether enabled.
STR cmEthernetTrafficPortLpbkInnerVlanTag	1.3.6.1.4.1.2544.1.12.4.1.69.1.3	DisplayString	read-write	This object represent the inner vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
T/F cmEthernetTrafficPortLpbkOuterVlanEnabled	1.3.6.1.4.1.2544.1.12.4.1.69.1.4	TruthValue	read-write	This object represent the outter vlan whether enabled.
STR cmEthernetTrafficPortLpbkOuterVlanTag	1.3.6.1.4.1.2544.1.12.4.1.69.1.5	DisplayString	read-write	This object represent the outter vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
CML cmEthernetTrafficPortLpbkStatus	1.3.6.1.4.1.2544.1.12.4.1.69.1.7	CmLoopbackType	read-only	This object represent the vlan loopback status.
cmEthernetTrafficPortLpbkTable	1.3.6.1.4.1.2544.1.12.4.1.69		not-accessible	A list of entries corresponding to Vlan loopback on Ethernet Traffic Port.
I32 cmEthernetTrafficPortLpbkTime	1.3.6.1.4.1.2544.1.12.4.1.69.1.6	Integer32	read-write	This object represent the vlan loopback time.
I32 cmEthernetTrafficPortMaxMpFpNum	1.3.6.1.4.1.2544.1.12.4.1.27.1.107	Integer32	read-write	This object allows to set the mpflow max fp number, and now only the ports on ethernet10x1GCard, ethernet1x10GCard, ethernet1x10GHighPerCard, ethernet10x1GHighPerCard support this attribute. for others, cann't be set and will return 0.
T/F cmEthernetTrafficPortMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.3	TruthValue	read-write	Whether multicast packets need be limited on this port.
U32 cmEthernetTrafficPortMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.5	Unsigned32	read-write	The rate limiting for multicast packets per port When cmEthernetTrafficPortMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmEthernetTrafficPortMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.4	Unsigned32	read-write	The rate limiting for multicast packets per port When cmEthernetTrafficPortMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
CME cmEthernetTrafficPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.12	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet port.
CME cmEthernetTrafficPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.27.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Port.
ETH cmEthernetTrafficPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Port. The media type includes, copper (1) fiber (2) coppersfp (3) CM Aggregation Product doesn't support copper.
ETH cmEthernetTrafficPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.27.1.122	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Traffic Port.
CME cmEthernetTrafficPortMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.115	CmEthernetSvcPortMode	read-write	This object allows specification of whether the Ethernet Traffic Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offering MAC based services) mode.
I32 cmEthernetTrafficPortMTU	1.3.6.1.4.1.2544.1.12.4.1.27.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Port. The object is made read-write for FSP150CC devices.
ETH cmEthernetTrafficPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.27.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Port.
CMO cmEthernetTrafficPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.27.1.55	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
CMO cmEthernetTrafficPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.27.1.40	CmOamDiscoveryState	read-only	Ethernet Port's OAM discovery state.
T/F cmEthernetTrafficPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.54	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Traffic Port.
I32 cmEthernetTrafficPortOamId	1.3.6.1.4.1.2544.1.12.4.1.27.1.39	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
T/F cmEthernetTrafficPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.42	TruthValue	read-only	This object allows specification of whether the Ethernet Port supports interpreting Link Events.
I32 cmEthernetTrafficPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.27.1.45	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
CMO cmEthernetTrafficPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.46	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
T/F cmEthernetTrafficPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.27.1.43	TruthValue	read-write	This object allows specification of whether the Ethernet Port is capable of OAM remote loopback mode.
T/F cmEthernetTrafficPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.44	TruthValue	read-only	This object allows specification of whether the Ethernet Port is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetTrafficPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.41	TruthValue	read-only	This object allows specification of whether the Ethernet Port supports sending variable response OAMPDUs.
T/F cmEthernetTrafficPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.49	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
MAC cmEthernetTrafficPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.47	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
I32 cmEthernetTrafficPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.27.1.52	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
CMO cmEthernetTrafficPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.53	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
T/F cmEthernetTrafficPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.27.1.50	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetTrafficPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.51	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetTrafficPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.48	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
OPE cmEthernetTrafficPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.27.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Port.
U32 cmEthernetTrafficPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.27.1.142	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Traffic Port.
T/F cmEthernetTrafficPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.27.1.141	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Traffic Port.
STR cmEthernetTrafficPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.27.1.26	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.27.1.27	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.27.1.28	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
INT cmEthernetTrafficPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.27.1.25	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled
T/F cmEthernetTrafficPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.63.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
cmEthernetTrafficPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.63.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
I32 cmEthernetTrafficPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.63.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
VLA cmEthernetTrafficPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.63.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmEthernetTrafficPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.63.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
cmEthernetTrafficPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.63		not-accessible	EthernetTraffic Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
VLA cmEthernetTrafficPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.64.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmEthernetTrafficPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.64.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmEthernetTrafficPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.62.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
VLA cmEthernetTrafficPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.62.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
cmEthernetTrafficPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.62.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
I32 cmEthernetTrafficPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.62.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
VLA cmEthernetTrafficPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.62.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
cmEthernetTrafficPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.62		not-accessible	EthernetTraffic Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the EthernetTraffic port.
PCP cmEthernetTrafficPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.27.1.92	PcpDEEncType	read-write	This object describes the PCP encoding mode for egress packets and the PCP decoding mode for ingress packets on this port.
cmEthernetTrafficPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.64.1		not-accessible	A conceptual row in the cmAccPortPcpDEPairEntry.
I32 cmEthernetTrafficPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.64.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
PCP cmEthernetTrafficPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.93	PcpDEPairsAction	read-write	This object describes this port pcp de pairs action.
cmEthernetTrafficPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.64		not-accessible	EthernetTraffic Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmEthernetTrafficPortPcpGroup	1.3.6.1.4.1.2544.1.12.4.2.2.25			A collection of objects used to manage the traffic port pcp Group.
XGE cmEthernetTrafficPortPhyType	1.3.6.1.4.1.2544.1.12.4.1.27.1.80	XgePhyType	read-write	This object is valid only to XGE card. And the value should be LAN or WAN when it is XGE card.
CHA cmEthernetTrafficPortPlugChannelType	1.3.6.1.4.1.2544.1.12.4.1.27.1.156	ChannelType	read-write	This specifies plug's type channel configuration.
OID cmEthernetTrafficPortPlugFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.159	FrequencyIdentifier	read-write	If Channel Type is FREQUENCY, this is the local plug's frequency.
GME cmEthernetTrafficPortPlugGMetroAutoTuningMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.155	GMetroAutoTuningMode	read-write	This is tuning mode for G.Metro plug.
OID cmEthernetTrafficPortPlugITUCbandChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.157	ITUCBandChannelIdentifier	read-write	If Channel Type is ITU-CBAND, this is the local plug's ITU C-band channel.
PLU cmEthernetTrafficPortPlugMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.154	PlugMode	read-write	This specifies if the plug is acting as head-end or tail-end.
OUT cmEthernetTrafficPortPlugOutOfBandChannelStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.160	OutOfBandChannelStatus	read-only	Status of the out of band channel between the local and remote plug.
OID cmEthernetTrafficPortPlugRelativeChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.158	RelativeChannelIdentifier	read-write	If Channel Type is RELATIVE-CHANNEL-NUMBER, this is the local plug's relative channel.
PLU cmEthernetTrafficPortPlugType	1.3.6.1.4.1.2544.1.12.4.1.27.1.153	PlugType	read-write	This specifies the port's plug type.
VLA cmEthernetTrafficPortPortVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.69	VlanId	read-write	This object allows to specify the Ethernet Port VLAN Id to PUSH on untagged frames in the to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled is set to true.
VLA cmEthernetTrafficPortPortVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.27.1.70	VlanPriority	read-write	This object allows to specify the Ethernet Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetTrafficPortPortVlanId) on untagged frames in the ingress direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled is set to true.
VLA cmEthernetTrafficPortPriorityVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.71	VlanId	read-write	This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is only applicable for connection-oriented, evpl service type. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortSwapPriorityVID
U32 cmEthernetTrafficPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.27.1.63	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Port.
T/F cmEthernetTrafficPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.75	TruthValue	read-write	This object allows to specify whether the Ethernet Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM cmEthernetTrafficPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.78	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
NUM cmEthernetTrafficPortRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.52.1.12	VariablePointer	read-write	This object allows to set priority map profile.
NUM cmEthernetTrafficPortRelatedVCG	1.3.6.1.4.1.2544.1.12.4.1.52.1.2	VariablePointer	read-only	This object describes the related VCG of the traffic port.
OID cmEthernetTrafficPortRemotePlugFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.163	FrequencyIdentifier	read-write	If Channel Type is FREQUENCY, this is the remote plug's frequency.
OID cmEthernetTrafficPortRemotePlugITUCbandChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.161	ITUCBandChannelIdentifier	read-write	If Channel Type is ITU-CBAND, this is the remote plug's ITU C-band channel.
OID cmEthernetTrafficPortRemotePlugRelativeChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.162	RelativeChannelIdentifier	read-write	If Channel Type is RELATIVE-CHANNEL-NUMBER, this is the remote plug's relative channel.
SFP cmEthernetTrafficPortRemoteSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.174	SfpConnectorValue	read-only	This object provides Connector Type of the Remote SFP.
DAT cmEthernetTrafficPortRemoteSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.27.1.169	DateAndTime	read-only	This object provides the date of manufacture of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.27.1.167	DisplayString	read-only	This object provides the hardware revision of the Remote SFP.
OID cmEthernetTrafficPortRemoteSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.175	SfpIdentifierValue	read-only	This object provides the Remote SFP identifier value.
U32 cmEthernetTrafficPortRemoteSfpLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.172	Unsigned32	read-only	This object provides frequency of the Remote SFP, the step is 1GHZ.
I32 cmEthernetTrafficPortRemoteSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.171	Integer32	read-only	This object provides Laser Wave Length in nano meters of the Remote SFP.
I32 cmEthernetTrafficPortRemoteSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.170	Integer32	read-only	This object provides Link Length of the Remote SFP.
SFP cmEthernetTrafficPortRemoteSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.173	SfpMediaType	read-only	This object provides Media Type of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpName	1.3.6.1.4.1.2544.1.12.4.1.27.1.165	DisplayString	read-only	This object provides the official name of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.166	DisplayString	read-only	This object provides the part number of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.168	DisplayString	read-only	This object provides the serial number of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.27.1.164	DisplayString	read-only	This object provides the vendor name of the Remote SFP.
ROW cmEthernetTrafficPortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.82	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmEthernetTrafficPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmEthernetTrafficPortRowStatus object may be modified if the associated instance of this object is equal to active(1).
RXD cmEthernetTrafficPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.111	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
DEI cmEthernetTrafficPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.27.1.113	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
T/F cmEthernetTrafficPortRxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.57	TruthValue	read-write	This object defines the RxPause enable or disable of the port.
SYN cmEthernetTrafficPortRxSsmQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.132	SynceRxSsmQl	read-write	This object allows to manage how RX quality level is utilized on OSA540X ethernet port.
SEC cmEthernetTrafficPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.27.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Port.
CME cmEthernetTrafficPortServiceType	1.3.6.1.4.1.2544.1.12.4.1.27.1.116	CmEthernetSvcType	read-write	This object allows specification of whether the Ethernet Traffic Port provides transparent port based services, or multi-flow VLAN based services.
SFP cmEthernetTrafficPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
DAT cmEthernetTrafficPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.27.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
STR cmEthernetTrafficPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.27.1.147	DisplayString	read-only	This object provides the hardware revision of the SFP.
OID cmEthernetTrafficPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.152	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
I32 cmEthernetTrafficPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.19	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetTrafficPortMediaType is fiber.
U32 cmEthernetTrafficPortSfpLaserWaveLengthPicometer	1.3.6.1.4.1.2544.1.12.4.1.27.1.81	Unsigned32	read-only	This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then cmEthernetTrafficPortSfpLaserWaveLength=1510 and cmTrafficPortSfpLaserWaveLengthPicometer=10.
I32 cmEthernetTrafficPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.18	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
SFP cmEthernetTrafficPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.20	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
STR cmEthernetTrafficPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.27.1.146	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetTrafficPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
STR cmEthernetTrafficPortSfpRxPowerLevel	1.3.6.1.4.1.2544.1.12.4.1.27.1.144	DisplayString	read-only	This object provides the SFP TX power level in dBm. The format would be [+/-]XX.YYYY. Note: the sign [+/-] and the decimal point (.YYYY) are optional.
STR cmEthernetTrafficPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is shown only when cmEthernetTrafficPortMediaType is fiber.
STR cmEthernetTrafficPortSfpTxPowerLevel	1.3.6.1.4.1.2544.1.12.4.1.27.1.143	DisplayString	read-only	This object provides the SFP TX power level in dBm. The format would be [+/-]XX.YYYY. Note: the sign [+/-] and the decimal point (.YYYY) are optional.
STR cmEthernetTrafficPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.27.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
U32 cmEthernetTrafficPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.27.1.62	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled.
U32 cmEthernetTrafficPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.27.1.61	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Ethernet Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled.
T/F cmEthernetTrafficPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.60	TruthValue	read-write	This object allows to manage the Ethernet Port Shaping. When enabled, values in cmEthernetTrafficPortShapedSpeedLo and cmEthernetTrafficPortShapedSpeedHi are applicable.
MAC cmEthernetTrafficPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.83	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
CME cmEthernetTrafficPortSvcType	1.3.6.1.4.1.2544.1.12.4.1.27.1.56	CmEthernetTrafficSvcType	read-write	This object allows specification of whether the Ethernet Port is port based or vlan based.
VLA cmEthernetTrafficPortSwapPriorityVID	1.3.6.1.4.1.2544.1.12.4.1.27.1.127	VlanId	read-write	This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.74	TruthValue	read-write	This object allows to specify whether the Ethernet Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
SYN cmEthernetTrafficPortSyncEMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.133	SynceMode	read-write	This object allows to manage SyncE mode (master or slave) on OSA540X ethernet port.
STR cmEthernetTrafficPortSyncEServiceAvailablePercentage	1.3.6.1.4.1.2544.1.12.4.1.27.1.136	DisplayString	read-only	This object allows to manage service available in percentage [XXX.YY%] for SYNCE.
U32 cmEthernetTrafficPortSyncEServiceAvailableTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.134	Unsigned32	read-only	This object allows to manage service available time (seconds) for SYNCE.
U32 cmEthernetTrafficPortSyncEServiceUnavailableTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.135	Unsigned32	read-only	This object allows to manage service unavailable time (seconds) for SYNCE.
cmEthernetTrafficPortTable	1.3.6.1.4.1.2544.1.12.4.1.27		not-accessible	A list of entries corresponding to Ethernet Facilities for configuration purposes.
AFP cmEthernetTrafficPortTagFrameControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.64	AfpTagControl	read-write	This object defines if c-tag/s-tag frame is allowed to pass through, available only when AFP is set to Tagged.
GFP cmEthernetTrafficPortTDMEncapsulation	1.3.6.1.4.1.2544.1.12.4.1.52.1.1	GFPEncapsulationType	read-write	This object describes the GFP Encapsulation type of the traffic port.
SSM cmEthernetTrafficPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.79	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
TXD cmEthernetTrafficPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.112	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
DEI cmEthernetTrafficPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.27.1.114	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
T/F cmEthernetTrafficPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.58	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet port.
TOG cmEthernetTrafficPortTxSsm	1.3.6.1.4.1.2544.1.12.4.1.27.1.131	ToggleValue	read-write	This object allows to manage (enable/disable) TX SMM on OSA540X ethernet port.
I32 cmEthernetTrafficPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.27.1.138	Integer32	read-write	This object is used to specify the wfq group cos value.
U32 cmEthernetTrafficPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.27.1.140	Unsigned32	read-write	This object is used to specify the wfq group eir high 32 bits value.
U32 cmEthernetTrafficPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.27.1.139	Unsigned32	read-write	This object is used to specify the wfq group eir low 32 bits value.
I32 cmEthernetTrafficPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.27.1.137	Integer32	read-write	This object is used to specify the wfq segmentation cos value.
cmFacilityCompliance	1.3.6.1.4.1.2544.1.12.4.2.1.1			Describes the requirements for conformance to the CM Facility group.
cmFacilityCompliances	1.3.6.1.4.1.2544.1.12.4.2.1
cmFacilityConformance	1.3.6.1.4.1.2544.1.12.4.2
cmFacilityGroups	1.3.6.1.4.1.2544.1.12.4.2.2
cmFacilityMIB	1.3.6.1.4.1.2544.1.12.4			This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
cmFacilityObjectGroup	1.3.6.1.4.1.2544.1.12.4.2.2.1			*******************THIS GROUP IS NOW DEPRECATED ******************* A collection of objects used to manage the CM Facility group.
cmFacilityObjects	1.3.6.1.4.1.2544.1.12.4.1
T/F cmFlowA2NBroadcastRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.59	TruthValue	read-write	Whether broadcast frames are limited per Flow.
U32 cmFlowA2NBroadcastRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.61	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
U32 cmFlowA2NBroadcastRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.60	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
U32 cmFlowA2NCIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.8	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the lower 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 CIR.
U32 cmFlowA2NCIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.21	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. This value represents the upper 32 bits of CIR (lower is provided in cmFlowA2NCIR). For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 CIR.
T/F cmFlowA2NCombinedRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.62	TruthValue	read-write	Whether both multicast and broadcast frames are limited per Flow.
U32 cmFlowA2NCombinedRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.64	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
U32 cmFlowA2NCombinedRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.63	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
U32 cmFlowA2NEIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the lower 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 EIR.
U32 cmFlowA2NEIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.22	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 EIR.
T/F cmFlowA2NMulticastRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.56	TruthValue	read-write	Whether multicast frames are limited per Flow.
U32 cmFlowA2NMulticastRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.58	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
U32 cmFlowA2NMulticastRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.57	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
SHA cmFlowA2NShapingType	1.3.6.1.4.1.2544.1.12.4.1.4.1.45	ShapingType	read-create	This object is used to specify whether the traffic in A2N direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbased flows the value of this attribute is flow-based and cannot be changed. In case of regular and default flows Fsp150 products may support both port-based and flow-based shaping.
FLO cmFlowAction	1.3.6.1.4.1.2544.1.12.4.1.4.1.18	FlowVlanActionType	read-write	This object is applicable only when Port is in connection-oriented evpl mode and the cmFlowType is regular. This object allows to add or remove the VLAN members specified by cmFlowActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowActionVlan and then should specify cmFlowAction on whether to add/remove the specified VLAN member.
STR cmFlowActionVlan	1.3.6.1.4.1.2544.1.12.4.1.4.1.19	DisplayString	read-create	This object is applicable only when Port is in connection-oriented evpl mode. This object allows adding/removing VLAN members to a connection-oriented evpl regular flow. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmFlowAction.
ADM cmFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.4.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
T/F cmFlowAutoBandwidthConfigEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.48	TruthValue	read-create	This object is applicable for Flows on the PWE3 Ethernet Backplane Port. When set to TRUE bandwidth of this Flow will be automatically adjusted when PWE3 SATOPs are provisioned. The bandwidth will be adjusted based on the TDM entities of associated SATOPs. Flow on ports other than PWE3 Ethernet Backplane Port will always have this value set to FALSE and it is not configurable.
I32 cmFlowAutoCIRPercentage	1.3.6.1.4.1.2544.1.12.4.1.4.1.52	Integer32	read-create	This object specifies the percentage of available CIR on the Network ports assigned to this Flow when cmFlowAutoBandwidthConfigEnabled is TRUE. The flow guaranteedBW is set to available BW multiplied by this value. This object is only applicable to Tranparent Flow. The value of this object should be 0 for Access Flow.
STR cmFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.4.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the Flow.
FLO cmFlowConfigType	1.3.6.1.4.1.2544.1.12.4.1.4.1.54	FlowConfigType	read-only	This object specifies if this Flow is an Access Flow or Pass-thru Flow.
I32 cmFlowCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.16	Integer32	read-create	This object allows specification of the COS (Class of Service) value for the Traffic Flow. This value is used at flow creation time to identify the COS level of the A2N and N2A shaper. In case of a multi-COS flow, this value is not applicable when multiple policers/shapers exist on the flow. This object is also applicable to specify the COS of a connection-oriented epl service.
CMC cmFlowCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.5.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
cmFlowCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.5.1		not-accessible	A conceptual row in the cmFlowCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
I32 cmFlowCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.5.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmFlowCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
STR cmFlowCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.5.1.3	DisplayString	read-only	This provides description of CPD Filter.
CMC cmFlowCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.5.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
I32 cmFlowCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.5.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
MAC cmFlowCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
MAC cmFlowCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.5.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
I32 cmFlowCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.5.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmFlowCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
cmFlowCpdTable	1.3.6.1.4.1.2544.1.12.4.1.5		not-accessible	A list of entries corresponding to Flow Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
CMA cmFlowCpdV2ActiveControlProtocols	1.3.6.1.4.1.2544.1.12.4.1.14.1.27	CmActiveControlProtocolsType	read-only	List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
CMC cmFlowCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmFlowCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmFlowCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmFlowCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmFlowCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmFlowCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmFlowCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmFlowCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmFlowCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.29	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
cmFlowCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.14.1		not-accessible	A conceptual row in the cmFlowCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Flow.
CMC cmFlowCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmFlowCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmFlowCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmFlowCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
I32 cmFlowCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.14.1.1	Integer32	read-only	Unique Index value to access the CPD row.
CMC cmFlowCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmFlowCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmFlowCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmFlowCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmFlowCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmFlowCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmFlowCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmFlowCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmFlowCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmFlowCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmFlowCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmFlowCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmFlowCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmFlowCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmFlowCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmFlowCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmFlowCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmFlowCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmFlowCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmFlowCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmFlowCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmFlowCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmFlowCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmFlowCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmFlowCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmFlowCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmFlowCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmFlowCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmFlowCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
cmFlowCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.14		not-accessible	A list of entries corresponding to Ethernet Flow Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices.
CMC cmFlowCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmFlowCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmFlowCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmFlowCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
FLO cmFlowCTagControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.30	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowCTagVlanId) and priority (cmFlowCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowCTagVlanId; if the type is 'none', no C-TAG management is performed. This object is not applicable for Tranparent Flow; the value should be 'none'.
T/F cmFlowCTagMatchRxPrio	1.3.6.1.4.1.2544.1.12.4.1.4.1.33	TruthValue	read-create	This object is used to specify whether the C-TAG priority be used or ignored for traffic in the N2A direction. This is only applicable if cmFlowCTagControl is 'push'. This object is not applicable for Tranparent Flow; the value should be FALSE.
VLA cmFlowCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.4.1.31	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push', 'swapvid' and 'pushvid' control types. This object is not applicable for Tranparent Flow; the value should be 0.
VLA cmFlowCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.4.1.32	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
cmFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.4.1		not-accessible	A conceptual row in the cmFlowTable. These entries represent an Ethernet Flow.
I32 cmFlowESFramesLossThreshold	1.3.6.1.4.1.2544.1.12.4.1.4.1.39	Integer32	read-write	This object is used to specify the number of frames lost per flow that starts counting Errored Seconds (ES) on the flow. This functionality is applicable if the flow is monitored using the Y.1731 ESA functionality.
U32 cmFlowGuaranteedA2NBandwidthHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.27	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of guaranteed bandwidth (upper 32 bits) of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 guaranteed bandwidth.
U32 cmFlowGuaranteedA2NBandwidthLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.26	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of guaranteed bandwidth (lower 32 bits) of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 guaranteed bandwidth.
T/F cmFlowHCOSMgmtEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.25	TruthValue	read-create	This object allows management of Hierarchical COS on the Flow.
T/F cmFlowIndependentA2NShaperBW	1.3.6.1.4.1.2544.1.12.4.1.4.1.71	TruthValue	read-write	This object used to specify the flow related A2N shaper BW whether independent.
I32 cmFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.4.1.1	Integer32	read-create	The integer index value corresponding to an Ethernet Flow.
T/F cmFlowInnerTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.43	TruthValue	read-create	This object is used to specify whether the flow participates in inner-tag (second) priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N inner-tag priority to be specified based on incoming priority at Access Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should FALSE.
NUM cmFlowLoopAvoidanceObject	1.3.6.1.4.1.2544.1.12.4.1.4.1.53	VariablePointer	read-create	This object specifies the Loop Avoidance instance to which this Flow belongs. This object is appicable only for Transparent Flow and should point to the ERP instance for which this Flows carries pass-thru traffic. In case of Access Flow the value of this object should be zeroDotZero.
U32 cmFlowMaximumA2NBandwidthHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.29	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of maximum bandwidth (upper 32 bits) of a flow. This is the peak limit of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 maximum bandwidth.
U32 cmFlowMaximumA2NBandwidthLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.28	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of maximum bandwidth (lower 32 bits) of a flow. This is the peak limit of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 maximum bandwidth.
T/F cmFlowMultiCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.7	TruthValue	read-create	This object allows specification of multiple COS (Class of Service) Flow.
U32 cmFlowN2ACIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.11	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 CIR.
U32 cmFlowN2ACIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.23	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. This value represents the upper 32 bits of CIR (lower is provided in cmFlowN2ACIR). For a Multi COS flow, this value is settable only at creation time. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 CIR.
VLA cmFlowN2ACOSPriorityTagType	1.3.6.1.4.1.2544.1.12.4.1.4.1.38	VlanTagType	read-create	This object is used to specify whether the flow uses the inner-tag or the outer-tag in determining the COS (Class of Service) in the N2A direction. This object is applicable in the case of a Multi COS Flow. This object is not supported for Tranparent Flow;
U32 cmFlowN2AEIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.12	Unsigned32	read-create	This object represents the Excess Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 EIR.
U32 cmFlowN2AEIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.24	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Network to Access (N2A) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 EIR.
T/F cmFlowN2AOuterTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.44	TruthValue	read-create	This object is used to specify whether the flow participates in outer-tag priority swap in the A2N direction. The Priority Mapping Table cmNetPortPrioMapTable allows the N2A outer-tag priority to be specified based on incoming priority at Network Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowN2ARateLimitingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.10	TruthValue	read-create	This object allows management of the N2A rate limiting, independent of A2N rate limiting. When not enabled, N2A specification is the same as A2N. This object is not applicable for Tranparent Flow; the value should be FALSE.
SHA cmFlowN2AShapingType	1.3.6.1.4.1.2544.1.12.4.1.4.1.46	ShapingType	read-create	This object is used to specify whether the traffic in N2A direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbased flows the value of this attribute is flow-based and cannot be changed. In case of regular and default flows Fsp150 products may support both port-based and flow-based shaping.
T/F cmFlowN2NForwardingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.55	TruthValue	read-create	This object is used to specify whether n2n forwarding is enabled on particular Flow.
OPE cmFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.4.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
T/F cmFlowOuterTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.37	TruthValue	read-create	This object is used to specify whether the flow participates in outer-tag priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N outer-tag priority to be specified based on incoming priority at Access Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should be FALSE.
ACL cmFlowPointAclNoMatchDisposition	1.3.6.1.4.1.2544.1.12.4.1.29.1.58	AclNoMatchDispositionType	read-write	This attribute allows specify ACL no match disposition type
ADM cmFlowPointAdminState	1.3.6.1.4.1.2544.1.12.4.1.29.1.3	AdminState	read-write	This object represents the Administrative State of the FlowPoint.
NUM cmFlowPointAssociatedAclProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.21	VariablePointer	read-create	This object provides the association of an Flow with an ACL profile.
NUM cmFlowPointAssociatedFlowId	1.3.6.1.4.1.2544.1.12.4.1.29.1.6	VariablePointer	read-only	This object provides the association of an Flow with an FlowPoint.
T/F cmFlowPointAutoBandwidthConfigEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.47	TruthValue	read-create	This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available port bandwidth multiplied by the value of the cmFlowPointAutoCIRPercentage object. For a Hierarchical-COS Flow Point, the cmFlowPointMaximumBWLo and cmFlowPointMaximumBWHi are set to the maximum port bandwidth; the cmFlowPointGuaranteedBWLo and cmFlowPointGuaranteedBWHi are set to the available port bandwidth multiplied by the value of the cmFlowPointAutoCIRPercentage object. The value of this object must be FALSE when cmFlowPointIngressMultiCOSEnabled is TRUE and cmFlowPointHierarchicalCOSEnabled is FALSE.
I32 cmFlowPointAutoCIRPercentage	1.3.6.1.4.1.2544.1.12.4.1.29.1.48	Integer32	read-create	This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when cmFlowPointAutoBandwidthConfigEnabled is TRUE.
T/F cmFlowPointBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.29	TruthValue	read-write	Whether broadcast packets need be limited per FP.
U32 cmFlowPointBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.31	Unsigned32	read-write	The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmFlowPointBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.30	Unsigned32	read-write	The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
STR cmFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.29.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the FlowPoint.
T/F cmFlowPointColorMarkingSupported	1.3.6.1.4.1.2544.1.12.4.1.29.1.20	TruthValue	read-create	This object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed will be remarked according the meter result. If set to Disabled, the DEI bit is forced to 0.
CMC cmFlowPointCpdProfileBPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmFlowPointCpdProfileBridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.14	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmFlowPointCpdProfileBridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.22	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmFlowPointCpdProfileCdpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmFlowPointCpdProfileCiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.3	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmFlowPointCpdProfileCustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.49	CmControlProtocolDispType	read-write	The customer lldp Disposition type.
CMC cmFlowPointCpdProfileDtpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmFlowPointCpdProfileEfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmFlowPointCpdProfileELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.50	CmControlProtocolDispType	read-write	The ELMI Disposition type.
cmFlowPointCpdProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.34.1		not-accessible	A conceptual row in the cmFlowPointCpdProfileTable. These entries represent a Control Protocol Disposition of a flow point filtering criteria of the System.
CMC cmFlowPointCpdProfileGARPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.27	CmControlProtocolDispType	read-write	Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmFlowPointCpdProfileGARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.24	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmFlowPointCpdProfileGMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmFlowPointCpdProfileGVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.26	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22).
I32 cmFlowPointCpdProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.34.1.1	Integer32	read-only	Unique Index value to access the CPD profile row.
CMC cmFlowPointCpdProfileIslDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmFlowPointCpdProfileL2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmFlowPointCpdProfileLACPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmFlowPointCpdProfileLACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmFlowPointCpdProfileLANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.23	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmFlowPointCpdProfileLldpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP.
CMC cmFlowPointCpdProfileMac00DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmFlowPointCpdProfileMac01DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmFlowPointCpdProfileMac02DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmFlowPointCpdProfileMac03DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmFlowPointCpdProfileMac04DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmFlowPointCpdProfileMac05DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmFlowPointCpdProfileMac06DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmFlowPointCpdProfileMac07DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmFlowPointCpdProfileMac08DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmFlowPointCpdProfileMac09DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmFlowPointCpdProfileMac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmFlowPointCpdProfileMac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmFlowPointCpdProfileMac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmFlowPointCpdProfileMac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmFlowPointCpdProfileMac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmFlowPointCpdProfileMac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.46	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
STR cmFlowPointCpdProfileName	1.3.6.1.4.1.2544.1.12.4.1.34.1.2	DisplayString	read-write	This object describes the alias of the cpd V3 profile entry.
CMC cmFlowPointCpdProfileNearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.47	CmControlProtocolDispType	read-write	The nearest lldp Disposition type.
CMC cmFlowPointCpdProfileNonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.48	CmControlProtocolDispType	read-write	The non tp mr lldp Disposition type.
CMC cmFlowPointCpdProfilePagpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmFlowPointCpdProfilePauseDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmFlowPointCpdProfilePortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmFlowPointCpdProfilePvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
ROW cmFlowPointCpdProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.34.1.30	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmCpdProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmCpdProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmCpdProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
CMC cmFlowPointCpdProfileSSMDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
STO cmFlowPointCpdProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.34.1.29	StorageType	read-create	The type of storage configured for this entry.
cmFlowPointCpdProfileTable	1.3.6.1.4.1.2544.1.12.4.1.34		not-accessible	A list of entries corresponding to System Control Protocol Disposition V3 profile.
CMC cmFlowPointCpdProfileUdldDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmFlowPointCpdProfileUplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmFlowPointCpdProfileVlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmFlowPointCpdProfileVtpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
FLO cmFlowPointCTagControl	1.3.6.1.4.1.2544.1.12.4.1.29.1.13	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowPointCTagVlanId) and priority (cmFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified cmFlowPointCTagVlanId and cmFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
VLA cmFlowPointCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.29.1.14	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmFlowPointCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.15	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
T/F cmFlowPointDefaultMemberEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.25	TruthValue	read-write	defaultMemberEnabled with enabled means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.
T/F cmFlowPointEfEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.54	TruthValue	read-create	When enabled FlowPoint is configured to monitor elephant(large) flows. When disabled, elephant flow management is not supported on the FlowPoint.
EFI cmFlowPointEfIdentificationFields	1.3.6.1.4.1.2544.1.12.4.1.29.1.59	EfIdentificationFieldType	read-write	The Elephant Flows are identified per flowpoint. This object specifies the type of Elephant Flow identification based on specific fields in the L2-L4 headers. The identification includes the Source MAC Address, Destination MAC Address, Source IP Address, Destination IP Address, IP Protocol, Source Port and Destination Port. For Source and Destination ports, the supported protocols are TCP, UDP and SCTP.
EFI cmFlowPointEfIdentificationType	1.3.6.1.4.1.2544.1.12.4.1.29.1.55	EfIdentificationType	read-write	The Elephant Flows are identified per flowpoint. This object specifies the type of Elephant Flow identification based on specific fields in the L2-L4 headers. The five-tuple identification includes the Source MAC Address, Destination MAC Address, Source IP Address, Destination IP Address and IP Protocol. The seven-tuple identification includes the five-tuple fields as well as Source Port and Destination Port. For Source and Destination ports, the supported protocols are TCP, UDP and SCTP.
U32 cmFlowPointEfRateThresholdHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.57	Unsigned32	read-write	This object specifies the threshold for the rate to declare a flow as an Elephant Flow. If cmFlowPointEfEnabled is enabled and this is set to 0, it is same as cmFlowPointEfEnabled control being disabled. This object only represents higher-order 32 bits.
U32 cmFlowPointEfRateThresholdLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.56	Unsigned32	read-write	This object specifies the threshold for the rate to declare a flow as an Elephant Flow. If cmFlowPointEfEnabled is enabled and this is set to 0, it is same as cmFlowPointEfEnabled control being disabled. This object only represents lower-order 32 bits.
T/F cmFlowPointEgressInnerTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.46	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmFlowPointEgressOuterTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.19	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled,it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
SHA cmFlowPointEgressShapingType	1.3.6.1.4.1.2544.1.12.4.1.29.1.45	ShapingType	read-write	This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
STR cmFlowPointElmiEvcIdentifier	1.3.6.1.4.1.2544.1.12.4.1.29.1.52	DisplayString	read-create	This object specifies FlowPoint Evc Identifier required for E-LMI feature.
cmFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.29.1		not-accessible	A conceptual row in the cmFlowPointTable. These entries represent an FlowPoint. If the flowpoint attached to a lag, the slotIndex should be 255(255 is used to identify the flowpoint belongs to lag), and the cmEthernetTrafficPortIndex should be the f3LagIndex.
T/F cmFlowPointFrameFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.49	TruthValue	read-create	When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
cmFlowPointGroup	1.3.6.1.4.1.2544.1.12.4.2.2.28			A collection of objects used to manage the flow point entry Group.
U32 cmFlowPointGuaranteedBWHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.40	Unsigned32	read-write	This attribute description the flow point guaranteed bandwidth. This objects only represents high 32 bits.
U32 cmFlowPointGuaranteedBWLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.39	Unsigned32	read-write	This attribute description the flow point guaranteed bandwidth. This objects only represents low 32 bits.
T/F cmFlowPointHierarchicalCosEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.34	TruthValue	read-write	Enable or Disable Hierarchical COS shaping (flow shaping).
I32 cmFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.29.1.1	Integer32	read-create	The integer index value corresponding to an FlowPoint.
I32 cmFlowPointIngressCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.8	Integer32	read-create	This object allows specification of ingress COS (Class of Service) FlowPoint.
T/F cmFlowPointIngressMultiCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.7	TruthValue	read-create	This object allows specification of ingress multiple COS (Class of Service) FlowPoint.
T/F cmFlowPointIngressUntaggedFrameEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.12	TruthValue	read-create	This object allows to specify whether or not the flowpoint supports untagged frame.
STR cmFlowPointIngressVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.29.1.9	DisplayString	read-create	It allows specification of VLAN members of the FlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flowpoint is created, this attribute can only be updated using cmFlowPointVlanMemberAction and cmFlowPointVlanMemberActionVlan objects.
NUM cmFlowPointLoopAvoidance	1.3.6.1.4.1.2544.1.12.4.1.29.1.33	VariablePointer	read-write	EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
U32 cmFlowPointMaximumBWHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.38	Unsigned32	read-write	This attribute description the flow point maximum bandwidth. This objects only represents high 32 bits.
U32 cmFlowPointMaximumBWLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.37	Unsigned32	read-write	This attribute description the flow point maximum bandwidth. This objects only represents low 32 bits.
T/F cmFlowPointMcastAndBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.42	TruthValue	read-write	Whether multicast packets and broadcast packets need be limited per FP.
U32 cmFlowPointMcastAndBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.44	Unsigned32	read-write	The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmFlowPointMcastAndBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.43	Unsigned32	read-write	The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
T/F cmFlowPointMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.26	TruthValue	read-write	Whether multicast packets need be limited per FP.
U32 cmFlowPointMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.28	Unsigned32	read-write	The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmFlowPointMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.27	Unsigned32	read-write	The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
OPE cmFlowPointOperationalState	1.3.6.1.4.1.2544.1.12.4.1.29.1.4	OperationalState	read-only	This object represents the Operational State of the FlowPoint.
NUM cmFlowPointRefElpObject	1.3.6.1.4.1.2544.1.12.4.1.29.1.53	VariablePointer	read-create	This object specifies ELP object OID.
NUM cmFlowPointRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.29.1.51	VariablePointer	read-create	This object specifies EoMpls Pw object OID.
NUM cmFlowPointRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.41	VariablePointer	read-write	This object allows to set priority map profile.
ROW cmFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.29.1.24	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC cmFlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.29.1.5	SecondaryState	read-only	This object represents the Secondary State of the FlowPoint.
I32 cmFlowPointSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.29.1.22	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA functionality.
NUM cmFlowPointSplitHorizonGroupOID	1.3.6.1.4.1.2544.1.12.4.1.29.1.32	VariablePointer	read-write	Specifies the Split-Horizon Group EID. If there is no SHG, the value is none.
FLO cmFlowPointSTagControl	1.3.6.1.4.1.2544.1.12.4.1.29.1.16	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowPointSTagVlanId) and priority (cmFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified cmFlowPointSTagVlanId and cmFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
VLA cmFlowPointSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.29.1.17	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmFlowPointSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.18	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
STO cmFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.29.1.23	StorageType	read-create	The type of storage configured for this entry.
cmFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.29		not-accessible	A list of entries corresponding to FlowPoint for configuration purposes.
T/F cmFlowPointUsePortPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.50	TruthValue	read-write	This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
FLO cmFlowPointVlanMemberAction	1.3.6.1.4.1.2544.1.12.4.1.29.1.10	FlowVlanActionType	read-write	This object allows to add or remove the VLAN members specified by cmFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowPointVlanMemberActionVlan and then should specify cmFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
STR cmFlowPointVlanMemberActionVlan	1.3.6.1.4.1.2544.1.12.4.1.29.1.11	DisplayString	read-create	This object allows adding/removing VLAN members to a flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmFlowPointVlanMemberAction.
I32 cmFlowPointWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.61	Integer32	read-write	This object is used to specify wfq group COS value.
U32 cmFlowPointWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.63	Unsigned32	read-write	This object is used to specify wfq group EIR high 32 bits value.
U32 cmFlowPointWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.62	Unsigned32	read-write	This object is used to specify wfq group EIR low 32 bits value.
I32 cmFlowPointWfqOutPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.36	Integer32	read-write	This attribute description the WFQ out priority.
I32 cmFlowPointWfqQid	1.3.6.1.4.1.2544.1.12.4.1.29.1.35	Integer32	read-write	This attribute description the WFQ Qid.
I32 cmFlowPointWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.60	Integer32	read-write	This object is used to specify wfq segmentation COS value.
POL cmFlowPolicingControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.51	PolicingControl	read-create	This object specifies the direction(s) in which Poling is enabled on traffic within this Flow when cmFlowPolicingEnabled is TRUE.
T/F cmFlowPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.41	TruthValue	read-create	This object is applicable only when Port is in connection-oriented mode. This object is applicable to both epl and evpl mode flows. This object allows to enable/disable the policing function on the flow.
NUM cmFlowPort1	1.3.6.1.4.1.2544.1.12.4.1.4.1.49	VariablePointer	read-create	This object specifies a physical or logical port on the Access side of the Flow. This can be Access Port, Access LAG or Access Split Horizion Group. In case of Tranparent Flow this object specifies port1 of the Flow which is Network-1.
NUM cmFlowPort2	1.3.6.1.4.1.2544.1.12.4.1.4.1.50	VariablePointer	read-create	This object specifies a physical or logical port on the Network side of the Flow. This can be Network Port, Network LAG, Network Split Horizion Group ERP or Protection Group. In case of Tranparent Flow this object specifies port2 of the Flow which is Network-2.
T/F cmFlowPreserveSTagProperties	1.3.6.1.4.1.2544.1.12.4.1.4.1.42	TruthValue	read-create	This object is applicable only when Port is in connection-oriented mode. This object is applicable to evpl mode Regular flows, when S-TAG control is specified as SWAPVID. When enabled, this attribute preserves the EtherType (0x88a8) and DEI (Drop Eligibility Indicator) bit in the incoming S-TAG (both from Access and Network Port perspective) into the outgoing S-TAG. When not enabled, the incoming tag is considered as a Q-TAG (0x8100) and both EtherType and CFI (Canonical Form Indicator) bits are over-written by the S-TAG Ethertype (0x88a8) and DEI bit. This object is not applicable for Tranparent Flow; the value should be FALSE.
STR cmFlowRefConnectGuardFlowList	1.3.6.1.4.1.2544.1.12.4.1.4.1.69	DisplayString	read-write	This object specifies the secure flow list, it should be f3ConnectGuardFlowIndex value list split with comma.
NUM cmFlowRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.4.1.66	VariablePointer	read-write	This object specifies EoMpls Pw object OID.
NUM cmFlowRefN2APrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.4.1.67	VariablePointer	read-write	This object used to specify the flow's N2A direction profile.
NUM cmFlowRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.4.1.65	VariablePointer	read-write	This object used to specify the flow's profile.
ROW cmFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.4.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
SEC cmFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.4.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
T/F cmFlowSecureBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.68	TruthValue	read-write	This object can be used to enable/disable secure block.
STR cmFlowSecureStateList	1.3.6.1.4.1.2544.1.12.4.1.4.1.70	DisplayString	read-only	This object specifies the secure state list, it should be secure state value list and split with comma. For detailed description how to identify values, please see FlowSecState in CM-COMMON-MIB.
I32 cmFlowSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.4.1.40	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flow. This functionality is applicable if the flow is monitored using the Y.1731 ESA functionality.
FLO cmFlowSTagControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.34	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'swapvid', and 'none'. If the type is 'push', the VLAN Id (cmFlowSTagVlanId) and priority (cmFlowSTagVlanPriority) are pushed onto the frame; if the type is 'swapvid', the VLAN Id(12 bits) is swapped with the specified cmFlowSTagVlanId; type is 'none', no S-TAG manament is performed. This object is not applicable for Tranparent Flow; the value should be 'none'.
T/F cmFlowSTagMatchRxPrio	1.3.6.1.4.1.2544.1.12.4.1.4.1.47	TruthValue	read-create	This object indicates whether the S-TAG priority is used or ignored for traffic in the N2A direction. This is only applicable if cmFlowSTagControl is 'push'. This object is not applicable for Tranparent Flow; the value should be FALSE.
VLA cmFlowSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.4.1.35	VlanId	read-create	This object allows specification of the VLAN Id to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
VLA cmFlowSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.4.1.36	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
STO cmFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.4.1.13	StorageType	read-create	The type of storage configured for this entry.
cmFlowTable	1.3.6.1.4.1.2544.1.12.4.1.4		not-accessible	A list of entries corresponding to Ethernet Flows for configuration purposes. If the corresponding Ethernet Access Port's cmEthernetAccPortMode is connection-oriented and cmEthernetAccPortSvcType is epl, there exists a single Flow in this table. No Flow creation or deletion is allowed on this table for FSP150CM NTU based services. Since Fsp150 R5.6CC release this table is used to manage 2 types of Flows: - Access Port Flow as in the previous releases - Tranparent Flow (new in 5.6CC) A Transparent Flow is Flow between Network-1 and Network-2 ports used to convey pass-thru traffic in the ring topology e.g. ERP. Few of the existing attributes will have new semantix for Transperent Flow. Transparent Flow is a NE level object and hence has different indexing than the Access Port Flow. The valid indices are neIndex and cmFlowIndex. The remaining indices will have constant values as follows: shelfIndex = 1 slotIndex = 255 cmEthernetAccPortIndex = 0
FLO cmFlowTrafficType	1.3.6.1.4.1.2544.1.12.4.1.4.1.15	FlowTrafficType	read-only	This object provides information on the type of traffic flow supported by the system, i.e.'shaped-only' flows (support only shaping) or 'policed-shaped' (support policing and shaping) flows. 'shaped-only' flow exists for FSP150CM NTU and CPMR access ports. 'policed-shaped' flows are supported in FSP150CC devices. Please note that this object refers to how traffic profiles are managed on devices and is independent of the policing enabling/disabling feature.
CMF cmFlowType	1.3.6.1.4.1.2544.1.12.4.1.4.1.6	CmFlowType	read-create	This object represents the type of the Flow.
T/F cmFlowUntaggedMemberEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.20	TruthValue	read-create	This object is applicable only when Port is in connection-oriented evpl mode for a regular flow as well as default flow. This object allows to specify whether or not the flow supports untagged traffic.
STR cmFlowVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.4.1.17	DisplayString	read-create	This object is applicable only when Port is in connection-oriented evpl mode. This attribute is mandatory if creation of connection-oriented evpl regular flow is desired. It allows specification of VLAN members of the Flow. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flow is created, this attribute can only be updated using cmFlowAction and cmFlowActionVlan objects.
I32 cmFlowWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.73	Integer32	read-write	This object used to specify the flow related wfq group COS value.
U32 cmFlowWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.75	Unsigned32	read-write	This object used to specify the flow related wfq group EIR high 32 bits value.
U32 cmFlowWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.74	Unsigned32	read-write	This object used to specify the flow related wfq group EIR low 32 bits value.
I32 cmFlowWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.72	Integer32	read-write	This object used to specify the flow related wfq segmentation COS value.
I32 cmIngressPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.31.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
cmIngressPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.31.1		not-accessible	A conceptual row in the cmIngressPrioMapTable.
I32 cmIngressPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.31.1.1	Integer32	read-only	The integer index value corresponding to a priority value based on the cmEthernetTrafficPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmIngressPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.31.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmEthernetTrafficPortIngressPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
cmIngressPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.31		not-accessible	A list of entries corresponding to Ingress Priority Mapping for configuration purposes.
ADM cmMPFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.60.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
I32 cmMPFlowAgingTimer	1.3.6.1.4.1.2544.1.12.4.1.60.1.7	Integer32	read-write	MAC Table Entry will be removed from the forwarding table after an inactivity time represented by this entry. Not used in EG-X.
STR cmMPFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.60.1.2	F3DisplayString	read-write	This object allows SNMP management entities to provide a circuit identifier with the MPFlow.
cmMPFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.60.1		not-accessible	A conceptual row in the cmMPFlowTable.
STR cmMPFlowFPList	1.3.6.1.4.1.2544.1.12.4.1.60.1.13	F3DisplayString	read-write	This object only used to display trap and Flow point list. Fp will be add in the cmMPFlowMemberTable.
NUM cmMPFlowFwdTableSizeProfileID	1.3.6.1.4.1.2544.1.12.4.1.60.1.8	VariablePointer	read-write	Profile ID for Maximum number of MAC Table Entries for the flow
cmMPFlowGroup	1.3.6.1.4.1.2544.1.12.4.2.2.23			A collection of objects used to manage the MP flow entry Group.
I32 cmMPFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.60.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this MultiPointFlow.
LEA cmMPFlowLearningConfigAction	1.3.6.1.4.1.2544.1.12.4.1.60.1.12	LearningConfigAction	read-write	This objects allows performing user action on Learning Table.
T/F cmMPFlowLearningEnabled	1.3.6.1.4.1.2544.1.12.4.1.60.1.6	TruthValue	read-write	DISABLED: The forwarding function of the Flow does not dynamically learn MAC address to flowpoint mapping. ENABLED: The forwarding function of the Flow dynamically learns MAC address to flowpoint mapping based on ingress flowpoing and source MAC address.
cmMPFlowMemberEntry	1.3.6.1.4.1.2544.1.12.4.1.61.1		not-accessible	A conceptual row in the cmMPFlowMemberTable.
NUM cmMPFlowMemberFPIndex	1.3.6.1.4.1.2544.1.12.4.1.61.1.1	VariablePointer	not-accessible	This object describes the relate Flow point.
cmMPFlowMemberGroup	1.3.6.1.4.1.2544.1.12.4.2.2.24			A collection of objects used to manage the MP flow Member entry Group.
cmMPFlowMemberTable	1.3.6.1.4.1.2544.1.12.4.1.61		not-accessible	A list of entries corresponding to MPFlowMember.
OPE cmMPFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.60.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
ROW cmMPFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.61.1.2	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMPFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMPFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
ROW cmMPFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.60.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMPFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMPFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
SEC cmMPFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.60.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
STO cmMPFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.60.1.10	StorageType	read-create	The type of storage configured for this entry.
cmMPFlowTable	1.3.6.1.4.1.2544.1.12.4.1.60		not-accessible	A list of entries corresponding to MPFlow.
LEA cmMPFlowtableFullAction	1.3.6.1.4.1.2544.1.12.4.1.60.1.9	LearningAction	read-write	Action on ingress frames when the number of MAC Table entires has reached the maximum defined by tableSize. BLOCK: A frame with a Source MAC address not in the MAC Table will be discarded. FORWARD: A frame with a Source MAC address not in the MAC table will not be learned and will be flooded to other flowpoints.
T/F cmNetPortEncapPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.91.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming EncapPcp value.
cmNetPortEncapPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.91.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEDecTable.
I32 cmNetPortEncapPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.91.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible decoding table.
VLA cmNetPortEncapPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.91.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortEncapPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.91.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming EncapPcp value.
cmNetPortEncapPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.91		not-accessible	Ethernet Network Port EncapPcp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
VLA cmNetPortEncapPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.92.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmNetPortEncapPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.92.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortEncapPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.90.1.4	VlanPriority	read-write	This object is the EncapPcp value that has a priority value with implicit drop eligibility encoded into it.
VLA cmNetPortEncapPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.90.1.3	VlanPriority	read-write	This object is the EncapPcp value that has a priority value with implicit drop ineligibility encoded into it.
cmNetPortEncapPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.90.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEEncTable.
I32 cmNetPortEncapPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.90.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible encoding table.
VLA cmNetPortEncapPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.90.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
cmNetPortEncapPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.90		not-accessible	Ethernet Network Port EncapPcp drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortEncapPcpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.41			A collection of objects used to manage the encap PCP de decoding and encoding group function.
cmNetPortEncapPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.92.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEPairEntry.
I32 cmNetPortEncapPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.92.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible priority pair table.
cmNetPortEncapPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.92		not-accessible	Ethernet Network Port EncapPcp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the EncapPcp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
T/F cmNetPortExpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.85.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming Exp value.
cmNetPortExpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.85.1		not-accessible	A conceptual row in the cmNetPortExpDEDecTable.
I32 cmNetPortExpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.85.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible decoding table.
VLA cmNetPortExpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.85.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortExpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.85.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming Exp value.
cmNetPortExpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.85		not-accessible	Ethernet Network Port Exp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
VLA cmNetPortExpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.86.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmNetPortExpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.86.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortExpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.84.1.4	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop eligibility encoded into it.
VLA cmNetPortExpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.84.1.3	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop ineligibility encoded into it.
cmNetPortExpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.84.1		not-accessible	A conceptual row in the cmNetPortExpDEEncTable.
I32 cmNetPortExpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.84.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible encoding table.
VLA cmNetPortExpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.84.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
cmNetPortExpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.84		not-accessible	Ethernet Network Port Exp drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortExpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.39			A collection of objects used to manage the exp de decoding and encoding group function.
cmNetPortExpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.86.1		not-accessible	A conceptual row in the cmNetPortExpDEPairEntry.
I32 cmNetPortExpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.86.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible priority pair table.
cmNetPortExpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.86		not-accessible	Ethernet Network Port Exp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the Exp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
T/F cmNetPortExtBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.4	TruthValue	read-write	Whether broadcast packets need be limited per port.
U32 cmNetPortExtBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.6	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmNetPortExtBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.5	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
T/F cmNetPortExtCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.7	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
U32 cmNetPortExtCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.9	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
U32 cmNetPortExtCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.8	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
cmNetPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.76.1		not-accessible	A conceptual row in the cmNetPortExtTable.
T/F cmNetPortExtMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.1	TruthValue	read-write	Whether multicast packets need be limited on this port.
U32 cmNetPortExtMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.3	Unsigned32	read-write	The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmNetPortExtMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.2	Unsigned32	read-write	The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
NUM cmNetPortExtRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.76.1.10	VariablePointer	read-write	This object allows to set priority map profile.
cmNetPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.76		not-accessible	A list of entries corresponding to Network Port for configuration purposes.
T/F cmNetPortIpPrecDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.88.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming IpPrec value.
cmNetPortIpPrecDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.88.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEDecTable.
I32 cmNetPortIpPrecDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.88.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible decoding table.
VLA cmNetPortIpPrecDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.88.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortIpPrecDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.88.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming IpPrec value.
cmNetPortIpPrecDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.88		not-accessible	Ethernet Network Port IpPrec drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
VLA cmNetPortIpPrecDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.89.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmNetPortIpPrecDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.89.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortIpPrecDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.87.1.4	VlanPriority	read-write	This object is the IpPrec value that has a priority value with implicit drop eligibility encoded into it.
VLA cmNetPortIpPrecDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.87.1.3	VlanPriority	read-write	This object is the IpPrec value that has a priority value with implicit drop ineligibility encoded into it.
cmNetPortIpPrecDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.87.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEEncTable.
I32 cmNetPortIpPrecDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.87.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible encoding table.
VLA cmNetPortIpPrecDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.87.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
cmNetPortIpPrecDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.87		not-accessible	Ethernet Network Port IpPrec drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortIpPrecDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.40			A collection of objects used to manage the ip prec de decoding and encoding group function.
cmNetPortIpPrecDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.89.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEPairEntry.
I32 cmNetPortIpPrecDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.89.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible priority pair table.
cmNetPortIpPrecDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.89		not-accessible	Ethernet Network Port IpPrec drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the IpPrec DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
T/F cmNetPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.25.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
cmNetPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.25.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
I32 cmNetPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.25.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
VLA cmNetPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.25.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.25.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
cmNetPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.25		not-accessible	Ethernet Network Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
VLA cmNetPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.26.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmNetPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.26.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.24.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
VLA cmNetPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.24.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
cmNetPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.24.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
I32 cmNetPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.24.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
VLA cmNetPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.24.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
cmNetPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.24		not-accessible	Ethernet Network Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.26.1		not-accessible	A conceptual row in the cmNetPortPcpDEPairEntry.
I32 cmNetPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.26.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
cmNetPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.26		not-accessible	Ethernet Network Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
I32 cmNetPortPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.20.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
cmNetPortPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.20.1		not-accessible	A conceptual row in the cmNetPortPrioMapTable.
I32 cmNetPortPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.20.1.1	Integer32	read-only	The integer index value corresponding to a priority value.
I32 cmNetPortPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.20.1.2	Integer32	read-write	The integer index value corresponding to a priority value.
VLA cmNetPortPrioMapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.20.1.4	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (N2A direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowN2AOuterTagPrioEnabled'.
cmNetPortPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.20		not-accessible	A list of entries corresponding to Ethernet Network Port Priority Mappings in multi Class of Service (COS) mode.
ADM cmOAMFlowPointAdminState	1.3.6.1.4.1.2544.1.12.4.1.30.1.3	AdminState	read-write	This object represents the Administrative State of the OAMFlowPoint.
STR cmOAMFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.30.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the OAMFlowPoint.
cmOAMFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.30.1		not-accessible	A conceptual row in the cmOAMFlowPointTable. These entries represent an FlowPoint. If the oam flowpoint attached to a lag, the slotIndex should be 255(255 is used to identify the oam flowpoint belongs to lag), and the cmEthernetTrafficPortIndex should be the f3LagIndex.
I32 cmOAMFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.30.1.1	Integer32	read-create	The integer index value corresponding to an OAMFlowPoint.
T/F cmOAMFlowPointIngressUntaggedFrameSupported	1.3.6.1.4.1.2544.1.12.4.1.30.1.9	TruthValue	read-create	This object allows to specify whether or not the OAMFlowPoint supports untagged frame.
STR cmOAMFlowPointIngressVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.30.1.6	DisplayString	read-create	It allows specification of VLAN members of the OAMFlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flowpoint is created, this attribute can only be updated using cmOAMFlowPointVlanMemberAction and cmOAMFlowPointVlanMemberActionVlan objects.
OPE cmOAMFlowPointOperationalState	1.3.6.1.4.1.2544.1.12.4.1.30.1.4	OperationalState	read-only	This object represents the Operational State of the OAMFlowPoint.
ROW cmOAMFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.30.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmOAMFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmOAMFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmOAMFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC cmOAMFlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.30.1.5	SecondaryState	read-only	This object represents the Secondary State of the OAMFlowPoint.
I32 cmOAMFlowPointSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.30.1.10	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the oam flowpoint. This functionality is applicable if the oam flowpoint is monitored using the Y.1731 ESA functionality.
STO cmOAMFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.30.1.11	StorageType	read-create	The type of storage configured for this entry.
cmOAMFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.30		not-accessible	A list of entries corresponding to OAMFlowPoint for configuration purposes.
FLO cmOAMFlowPointVlanMemberAction	1.3.6.1.4.1.2544.1.12.4.1.30.1.7	FlowVlanActionType	read-write	This object allows to add or remove the VLAN members specified by cmOAMFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmOAMFlowPointVlanMemberActionVlan and then should specify cmOAMFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
STR cmOAMFlowPointVlanMemberActionVlan	1.3.6.1.4.1.2544.1.12.4.1.30.1.8	DisplayString	read-create	This object allows adding/removing VLAN members to a oam flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmOAMFlowPointVlanMemberAction.
NUM cmPethPsePortExtAssociatedPort	1.3.6.1.4.1.2544.1.12.4.1.58.1.3	VariablePointer	read-write	This object means the oid of associated physical port.
cmPethPsePortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.58.1		not-accessible	A conceptual row in the cmPethPsePortExtEntry.
I32 cmPethPsePortExtGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.58.1.1	Integer32	not-accessible	This object has the same value with the group index in pethPsePortTalbe.
I32 cmPethPsePortExtIndex	1.3.6.1.4.1.2544.1.12.4.1.58.1.2	Integer32	not-accessible	This object has the same value with the port index in pethPsePortTalbe.
cmPethPsePortExtTable	1.3.6.1.4.1.2544.1.12.4.1.58		not-accessible	A list of entries corresponding to PsePortExtEntry.
CMC cmPortCpdProfileBPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmPortCpdProfileBridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.14	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmPortCpdProfileBridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.22	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmPortCpdProfileCdpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmPortCpdProfileCiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.3	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmPortCpdProfileCustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.49	CmControlProtocolDispType	read-write	The customer lldp Disposition type.
CMC cmPortCpdProfileDtpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmPortCpdProfileEfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmPortCpdProfileELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.50	CmControlProtocolDispType	read-write	The ELMI Disposition type.
cmPortCpdProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.33.1		not-accessible	A conceptual row in the cmPortCpdProfileTable. These entries represent a Control Protocol Disposition of a port filtering criteria of the System.
CMC cmPortCpdProfileGARPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.27	CmControlProtocolDispType	read-write	Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmPortCpdProfileGARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.24	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmPortCpdProfileGMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmPortCpdProfileGVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.26	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22).
I32 cmPortCpdProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.33.1.1	Integer32	read-only	Unique Index value to access the CPD profile row.
CMC cmPortCpdProfileIslDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmPortCpdProfileL2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmPortCpdProfileLACPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmPortCpdProfileLACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmPortCpdProfileLANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.23	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmPortCpdProfileLldpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP.
CMC cmPortCpdProfileMac00DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmPortCpdProfileMac01DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmPortCpdProfileMac02DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmPortCpdProfileMac03DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmPortCpdProfileMac04DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmPortCpdProfileMac05DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmPortCpdProfileMac06DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmPortCpdProfileMac07DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmPortCpdProfileMac08DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmPortCpdProfileMac09DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmPortCpdProfileMac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmPortCpdProfileMac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmPortCpdProfileMac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmPortCpdProfileMac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmPortCpdProfileMac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmPortCpdProfileMac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.46	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
STR cmPortCpdProfileName	1.3.6.1.4.1.2544.1.12.4.1.33.1.2	DisplayString	read-write	This object describes the alias of the cpd V3 profile entry.
CMC cmPortCpdProfileNearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.47	CmControlProtocolDispType	read-write	The nearest lldp Disposition type.
CMC cmPortCpdProfileNonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.48	CmControlProtocolDispType	read-write	The non tp mr lldp Disposition type.
CMC cmPortCpdProfilePagpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmPortCpdProfilePauseDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmPortCpdProfilePortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmPortCpdProfilePvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
ROW cmPortCpdProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.33.1.30	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmCpdProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmCpdProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmCpdProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
CMC cmPortCpdProfileSSMDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
STO cmPortCpdProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.33.1.29	StorageType	read-create	The type of storage configured for this entry.
cmPortCpdProfileTable	1.3.6.1.4.1.2544.1.12.4.1.33		not-accessible	A list of entries corresponding to System Control Protocol Disposition V3 profile.
CMC cmPortCpdProfileUdldDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmPortCpdProfileUplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmPortCpdProfileVlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmPortCpdProfileVtpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
I32 cmPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.10.1.5	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
cmPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.10.1		not-accessible	A conceptual row in the cmPrioMapTable.
I32 cmPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.10.1.1	Integer32	read-only	The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
VLA cmPrioMapInnerTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.7	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority. Note that, each flow participates or not in inner-tag priority mapping, using the object 'cmFlowInnerTagPrioEnabled'.
I32 cmPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
VLA cmPrioMapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.6	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowOuterTagPrioEnabled'.
cmPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.10		not-accessible	A list of entries corresponding to Ethernet Priority Mappings in multi Class of Service (COS) mode. This table is applicable only when the Access Port is in connection-oriented evpl mode.
I32 cmPrioMapV2IngressPrioMappingCOS	1.3.6.1.4.1.2544.1.12.4.1.71.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
cmPrioMapV2IngressPrioMappingEntry	1.3.6.1.4.1.2544.1.12.4.1.71.1		not-accessible	A conceptual row in the cmPrioMapV2IngressPrioMappingTable.
cmPrioMapV2IngressPrioMappingGroup	1.3.6.1.4.1.2544.1.12.4.2.2.33			A collection of objects used to manage the priority map group.
I32 cmPrioMapV2IngressPrioMappingIndex	1.3.6.1.4.1.2544.1.12.4.1.71.1.1	Integer32	not-accessible	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmPrioMapV2IngressPrioMappingInPriority	1.3.6.1.4.1.2544.1.12.4.1.71.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
cmPrioMapV2IngressPrioMappingTable	1.3.6.1.4.1.2544.1.12.4.1.71		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
cmPrioMapV2PrioMappingCOSEntry	1.3.6.1.4.1.2544.1.12.4.1.72.1		not-accessible	A conceptual row in the cmPrioMapV2PrioMappingCOSTable.
I32 cmPrioMapV2PrioMappingCOSIndex	1.3.6.1.4.1.2544.1.12.4.1.72.1.1	Integer32	not-accessible	The index of this entry.
I32 cmPrioMapV2PrioMappingCOSInnerTagPri	1.3.6.1.4.1.2544.1.12.4.1.72.1.4	Integer32	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority.
I32 cmPrioMapV2PrioMappingCOSOuterTagPri	1.3.6.1.4.1.2544.1.12.4.1.72.1.3	Integer32	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority.
cmPrioMapV2PrioMappingCOSTable	1.3.6.1.4.1.2544.1.12.4.1.72		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
I32 cmPrioMapV2PrioMappingCOSValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.2	Integer32	read-only	This allows specification of the COS Value, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmPrioMapV2PrioMappingDscpValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.8	Integer32	read-write	This object allows configuring DSCP value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingEncapInnerTagPriority	1.3.6.1.4.1.2544.1.12.4.1.72.1.6	Integer32	read-write	This object allows configuring encapsulation inner tag priority value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingEncapOuterDscpValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.7	Integer32	read-write	This object allows configuring encapsulation outer DSCP value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingEncapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.72.1.5	Integer32	read-write	This object allows configuring encapsulation outer tag priority value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingPriCOS	1.3.6.1.4.1.2544.1.12.4.1.73.1.5	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
cmPrioMapV2PrioMappingPriEntry	1.3.6.1.4.1.2544.1.12.4.1.73.1		not-accessible	A conceptual row in the cmPrioMapV2PrioMappingPriTable.
I32 cmPrioMapV2PrioMappingPriIndex	1.3.6.1.4.1.2544.1.12.4.1.73.1.1	Integer32	not-accessible	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmPrioMapV2PrioMappingPriInPrio	1.3.6.1.4.1.2544.1.12.4.1.73.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
PRI cmPrioMapV2PrioMappingPriPrioControl	1.3.6.1.4.1.2544.1.12.4.1.73.1.3	PrioMapControlType	read-write	This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapV2XTagPriority.
cmPrioMapV2PrioMappingPriTable	1.3.6.1.4.1.2544.1.12.4.1.73		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
I32 cmPrioMapV2PrioMappingPriXTagPrio	1.3.6.1.4.1.2544.1.12.4.1.73.1.4	Integer32	read-write	This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapV2XTagControl as 'swap'.
STR cmPrioMapV2ProfileAlias	1.3.6.1.4.1.2544.1.12.4.1.70.1.2	DisplayString	read-write	The integer index value describes the profile alias.
NUM cmPrioMapV2ProfileAppliedObj	1.3.6.1.4.1.2544.1.12.4.1.74.1.1	VariablePointer	read-only	The object describe the profile Applied to. It maybe the access port or network port or flow etc.
cmPrioMapV2ProfileAppliedObjEntry	1.3.6.1.4.1.2544.1.12.4.1.74.1		not-accessible	A conceptual row in the cmPrioMapV2ProfileAppliedObjTable.
cmPrioMapV2ProfileAppliedObjTable	1.3.6.1.4.1.2544.1.12.4.1.74		not-accessible	A list of entries corresponding to Ethernet Priority Mappings V2 Profile AppliedObj.
T/F cmPrioMapV2ProfileCosMapControl	1.3.6.1.4.1.2544.1.12.4.1.70.1.8	TruthValue	read-write	This object is used to control whether has cmPrioMapV2PrioMappingCOSTable in profile.
COS cmPrioMapV2ProfileCosMapModeType	1.3.6.1.4.1.2544.1.12.4.1.70.1.7	CosMappingMode	read-write	This object is used to specify Cos mapping mode type.
U32 cmPrioMapV2ProfileDefaultCos	1.3.6.1.4.1.2544.1.12.4.1.70.1.9	Unsigned32	read-write	This object is used to specify the Default COS to be used when the Ingress Priority Mapping function does not match.
U32 cmPrioMapV2ProfileEgressCos	1.3.6.1.4.1.2544.1.12.4.1.70.1.10	Unsigned32	read-write	This object is used to specify the Default COS to be used when the Egress Priority Mapping function does not match.
cmPrioMapV2ProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.70.1		not-accessible	A conceptual row in the cmPrioMapV2ProfileTable.
cmPrioMapV2ProfileGroup	1.3.6.1.4.1.2544.1.12.4.2.2.32			A collection of objects used to manage the priority map profile group.
I32 cmPrioMapV2ProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.70.1.1	Integer32	not-accessible	The integer index value describes the profile index.
VLA cmPrioMapV2ProfileIngressCosPriority	1.3.6.1.4.1.2544.1.12.4.1.70.1.6	VlanTagType	read-create	This object is used to specify whether the profile uses the inner-tag or the outer-tag in determining the COS (Class of Service).
PRI cmPrioMapV2ProfileMapModeType	1.3.6.1.4.1.2544.1.12.4.1.70.1.3	PriorityMapMode	read-write	The integer index value describes the profile PriorityMapMode.
ROW cmPrioMapV2ProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.70.1.5	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmPrioMapV2ProfileStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmPrioMapV2ProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmPrioMapV2ProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
STO cmPrioMapV2ProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.70.1.4	StorageType	read-create	The type of storage configured for this entry.
cmPrioMapV2ProfileTable	1.3.6.1.4.1.2544.1.12.4.1.70		not-accessible	A list of entries corresponding to Ethernet Priority Mappings V2 Profile.
PRI cmPrioMapXTagControl	1.3.6.1.4.1.2544.1.12.4.1.10.1.3	PrioMapControlType	read-write	This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapXTagPriority.
VLA cmPrioMapXTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.4	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapXTagControl as 'swap'.
cmPseEXTGroup	1.3.6.1.4.1.2544.1.12.4.2.2.22			A collection of objects used to manage the pse group ext entry Group.
cmPsePortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.21			A collection of objects used to manage the pse port ext entry Group.
ADM cmQosFlowPolicerAdminState	1.3.6.1.4.1.2544.1.12.4.1.11.1.4	AdminState	read-write	This object represents the Administrative State of the QOS Flow Policer.
POL cmQosFlowPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.4.1.11.1.13	PolicerAlgorithmType	read-only	This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
NUM cmQosFlowPolicerAssociatedShaper	1.3.6.1.4.1.2544.1.12.4.1.11.1.17	VariablePointer	read-create	This object allows specification of the QOS Shaper associated with this Policer. Multiple Policers can map to single Shaper. The corresponding row with the specified QOS value must exist in cmQosShaperTable when this value is specified.
I32 cmQosFlowPolicerCBS	1.3.6.1.4.1.2544.1.12.4.1.11.1.11	Integer32	read-create	This object allows specification of the Commited Burst Size (CBS) on Policer.
U32 cmQosFlowPolicerCIRHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.8	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR.
U32 cmQosFlowPolicerCIRLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.7	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR.
U32 cmQosFlowPolicerCIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.20	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits.
U32 cmQosFlowPolicerCIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.21	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.
T/F cmQosFlowPolicerColorMarkingFlag	1.3.6.1.4.1.2544.1.12.4.1.11.1.15	TruthValue	read-create	This object allows specification of Policer Color Marking Flag. The policer will set/clear the DEI (Drop Eligibility Indication) bit of the frame on an S-TAG if this flag is enabled. This object is not supported - setting any value will not have effect on the System.
POL cmQosFlowPolicerColorMode	1.3.6.1.4.1.2544.1.12.4.1.11.1.14	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F cmQosFlowPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.11.1.16	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
TRA cmQosFlowPolicerDirection	1.3.6.1.4.1.2544.1.12.4.1.11.1.3	TrafficDirection	read-create	This object is allows specification of Policer direction as 'a2n' or 'n2a'.
I32 cmQosFlowPolicerEBS	1.3.6.1.4.1.2544.1.12.4.1.11.1.12	Integer32	read-create	This object allows specification of the Excess Burst Size (EBS) on the Policer.
U32 cmQosFlowPolicerEIRHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.10	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR.
U32 cmQosFlowPolicerEIRLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.9	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR.
U32 cmQosFlowPolicerEIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.22	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits.
U32 cmQosFlowPolicerEIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.23	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits.
cmQosFlowPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.11.1		not-accessible	A conceptual row in the cmQosFlowPolicerTable. These entries represent a Quality of Service Policer.
NUM cmQosFlowPolicerEnvelopeObject	1.3.6.1.4.1.2544.1.12.4.1.11.1.24	VariablePointer	read-write	This object allows specification of envelope object.
I32 cmQosFlowPolicerIndex	1.3.6.1.4.1.2544.1.12.4.1.11.1.2	Integer32	read-create	The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. In release 5.6CC the range is extended to 1..16 to support duplicate N2A policers on a Flow. The duplicate policers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 going from Network 1 port; indices 9..16 represent policers for COS 0..7 going from Network 2 port. In case of single-cos Flow index 1 represents policer going from Network 1 port; index 9 represents policer going from Network 2 port.
OPE cmQosFlowPolicerOperationalState	1.3.6.1.4.1.2544.1.12.4.1.11.1.5	OperationalState	read-only	This object represents the Operational State of the QOS Flow Policer.
T/F cmQosFlowPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.11.1.26	TruthValue	read-write	This object describes whether the policing is enabled.
I32 cmQosFlowPolicerRank	1.3.6.1.4.1.2544.1.12.4.1.11.1.25	Integer32	read-write	This object allows specification of rank value.
ROW cmQosFlowPolicerRowStatus	1.3.6.1.4.1.2544.1.12.4.1.11.1.19	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosFlowPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosFlowPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosFlowPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC cmQosFlowPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.11.1.6	SecondaryState	read-only	This object represents the Secondary State of the QOS Flow Policer.
STO cmQosFlowPolicerStorageType	1.3.6.1.4.1.2544.1.12.4.1.11.1.18	StorageType	read-create	The type of storage configured for this entry.
cmQosFlowPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.11		not-accessible	A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes.
I32 cmQosFlowPolicerTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.11.1.1	Integer32	read-create	The unique index value corresponding to a Quality of Service Policer's direction. Values 1 and 2 are applicable to the Access Flow Policer - value of 1 stands for A2N direction, - value of 2 stands for N2A direction. Values 3 and 4 are applicable to Pass-thru Flow Policer (new in 5.6CC release): - value of 3 stands for N1toN2 direction - value of 4 stands for N2toN1 direction
I32 cmQosPolicerProfileCBS	1.3.6.1.4.1.2544.1.12.4.1.39.1.7	Integer32	read-create	This object allows specification of the Commited Burst Size (CBS) on Policer Profile.
U32 cmQosPolicerProfileCIRHi	1.3.6.1.4.1.2544.1.12.4.1.39.1.4	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the upper 32 bits of the CIR.
U32 cmQosPolicerProfileCIRLo	1.3.6.1.4.1.2544.1.12.4.1.39.1.3	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the lower 32 bits of the CIR.
POL cmQosPolicerProfileColorMode	1.3.6.1.4.1.2544.1.12.4.1.39.1.9	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F cmQosPolicerProfileCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.39.1.10	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
I32 cmQosPolicerProfileEBS	1.3.6.1.4.1.2544.1.12.4.1.39.1.8	Integer32	read-create	This object allows specification of the Excess Burst Size (EBS) on the Policer Profile.
U32 cmQosPolicerProfileEIRHi	1.3.6.1.4.1.2544.1.12.4.1.39.1.6	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the upper 32 bits of the EIR.
U32 cmQosPolicerProfileEIRLo	1.3.6.1.4.1.2544.1.12.4.1.39.1.5	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the lower 32 bits of the EIR.
cmQosPolicerProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.39.1		not-accessible	A conceptual row in the cmQosPolicerProfileTable. These entries represent a Quality of Service Policer.
I32 cmQosPolicerProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.39.1.1	Integer32	read-create	This object defines the Policer profile ID. Up to 1000 profiles can be specified per system.
STR cmQosPolicerProfileName	1.3.6.1.4.1.2544.1.12.4.1.39.1.2	DisplayString	read-create	This object defines the alias for this profile
ROW cmQosPolicerProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.39.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosPolicerProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosPolicerProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosPolicerProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
STO cmQosPolicerProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.39.1.11	StorageType	read-create	The type of storage configured for this entry.
cmQosPolicerProfileTable	1.3.6.1.4.1.2544.1.12.4.1.39		not-accessible	A list of entries corresponding to Quality of Service Policer for configuration purposes.
ADM cmQosPolicerV2AdminState	1.3.6.1.4.1.2544.1.12.4.1.41.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Policer.
NUM cmQosPolicerV2AssociatedProfile	1.3.6.1.4.1.2544.1.12.4.1.41.1.6	VariablePointer	read-create	This object define the queue profile ID to be used, it is associated with the cmQosPolicerProfileIndex.
T/F cmQosPolicerV2ColorMarkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.41.1.5	TruthValue	read-only	This object indicates the colorMarking state of the QOS Policer.
cmQosPolicerV2Entry	1.3.6.1.4.1.2544.1.12.4.1.41.1		not-accessible	A conceptual row in the cmQosPolicerV2Table. These entries represent a Quality of Service Policer.
I32 cmQosPolicerV2Index	1.3.6.1.4.1.2544.1.12.4.1.41.1.1	Integer32	read-create	The Policer Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
OPE cmQosPolicerV2OperationalState	1.3.6.1.4.1.2544.1.12.4.1.41.1.3	OperationalState	read-only	This object represents the Operational State of the QOS Policer.
T/F cmQosPolicerV2PolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.41.1.9	TruthValue	read-write	Whether enable or disable the functionality of policing for this COS.
ROW cmQosPolicerV2RowStatus	1.3.6.1.4.1.2544.1.12.4.1.41.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosPolicerV2RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosPolicerV2RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosPolicerV2RowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC cmQosPolicerV2SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.41.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS Policer.
STO cmQosPolicerV2StorageType	1.3.6.1.4.1.2544.1.12.4.1.41.1.7	StorageType	read-create	The type of storage configured for this entry.
cmQosPolicerV2Table	1.3.6.1.4.1.2544.1.12.4.1.41		not-accessible	A list of entries corresponding to Quality of Service Policer for configuration purposes.
I32 cmQosQueueProfileBufferSize	1.3.6.1.4.1.2544.1.12.4.1.40.1.3	Integer32	read-create	This object defines the buffer size of the selected queues.
cmQosQueueProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.40.1		not-accessible	A conceptual row in the cmQosQueueProfileTable. These entries represent a Quality of Service Queue.
I32 cmQosQueueProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.40.1.1	Integer32	read-create	This object defines the Queue profile ID. Up to 64 profiles can be specified per system.
STR cmQosQueueProfileName	1.3.6.1.4.1.2544.1.12.4.1.40.1.2	DisplayString	read-create	This object defines the alias for this profile
T/F cmQosQueueProfileREDEnabled	1.3.6.1.4.1.2544.1.12.4.1.40.1.4	TruthValue	read-create	This object defines whether the WRED is enabled as congestion algorithm or not. If disabled, then the following RED parameters (cmQueueProfileWREDDp0MinTh, cmQueueProfileWREDDp0MaxTh and cmQueueProfileWREDDp0MaxProb) must not be specified.
ROW cmQosQueueProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.40.1.6	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosQueueProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosQueueProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosQueueProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
STO cmQosQueueProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.40.1.5	StorageType	read-create	The type of storage configured for this entry.
cmQosQueueProfileTable	1.3.6.1.4.1.2544.1.12.4.1.40		not-accessible	A list of entries corresponding to Quality of Service Queue for configuration purposes.
ADM cmQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.6.1.4	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
I32 cmQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.6.1.27	Integer32	read-write	This object specifies the average frame size before fragmentation.
U32 cmQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.6.1.11	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
U32 cmQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.6.1.8	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 cmQosShaperCIR	1.3.6.1.4.1.2544.1.12.4.1.6.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 cmQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.15	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
I32 cmQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.6.1.14	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
TRA cmQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.6.1.3	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
U32 cmQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.6.1.10	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 cmQosShaperEIR	1.3.6.1.4.1.2544.1.12.4.1.6.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Lower 32 bits) of a Shaper.
U32 cmQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.16	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
cmQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.6.1		not-accessible	A conceptual row in the cmQosShaperTable. These entries represent a Quality of Service Shaper.
I32 cmQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.6.1.2	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper. In release 5.6CC the range is extended to 1..16 to support duplicate A2N shapers on a Flow. The duplicate shapers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent shapers of COS 0..7 going to Network 1 port; indices 9..16 represent shapers for COS 0..7 going to Network 2 port. In case of single-cos Flow index 1 represents shaper going to Network 1 port; index 9 represents shaper going to Network 2 port.
OPE cmQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.6.1.5	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
ROW cmQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.6.1.13	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC cmQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.6.1.6	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
U32 cmQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.18	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) on the Shaper.
U32 cmQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.6.1.17	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits) of a Shaper.
U32 cmQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.20	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 cmQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.6.1.19	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Lower 32 bits) of a Shaper.
STO cmQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.6.1.12	StorageType	read-create	The type of storage configured for this entry.
cmQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.6		not-accessible	A list of entries corresponding to Ethernet Quality of Service Shaper for configuration purposes.
I32 cmQosShaperTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.6.1.1	Integer32	read-create	The unique index value corresponding to a Quality of Service Shaper's direction. Values 1 and 2 are applicable to the Access Flow Shaper: - value of 1 stands for A2N direction, - value of 2 stands for N2A direction. Values 3 and 4 are applicable to Pass-thru Flow Shaper (new in 5.6CC release): - value of 3 stands for N1toN2 direction - value of 4 stands for N2toN1 direction
C64 cmQosShaperV2ActualCIR	1.3.6.1.4.1.2544.1.12.4.1.42.1.16	Counter64	read-only	This object specifies the actual CIR.
C64 cmQosShaperV2ActualEIR	1.3.6.1.4.1.2544.1.12.4.1.42.1.17	Counter64	read-only	This object specifies the actual EIR.
U32 cmQosShaperV2AdditionalCIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.14	Unsigned32	read-write	This object specifies the Higher 32 bits of additional CIR.
U32 cmQosShaperV2AdditionalCIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.13	Unsigned32	read-write	This object specifies the Lower 32 bits of additional CIR.
ADM cmQosShaperV2AdminState	1.3.6.1.4.1.2544.1.12.4.1.42.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
NUM cmQosShaperV2AssociatedQueueProfile	1.3.6.1.4.1.2544.1.12.4.1.42.1.5	VariablePointer	read-create	This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex.
U32 cmQosShaperV2CIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.7	Unsigned32	read-write	This object specifies the Higher 32 bits of CIR.
U32 cmQosShaperV2CIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.6	Unsigned32	read-write	This object specifies the Lower 32 bits of CIR.
U32 cmQosShaperV2EIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.9	Unsigned32	read-write	This object specifies the Higher 32 bits of EIR.
U32 cmQosShaperV2EIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.8	Unsigned32	read-write	This object specifies the Lower 32 bits of EIR.
cmQosShaperV2Entry	1.3.6.1.4.1.2544.1.12.4.1.42.1		not-accessible	A conceptual row in the cmQosShaperV2Table. These entries represent a Quality of Service Shaper.
I32 cmQosShaperV2Index	1.3.6.1.4.1.2544.1.12.4.1.42.1.1	Integer32	read-create	The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
I32 cmQosShaperV2IngressAverageFrameSize	1.3.6.1.4.1.2544.1.12.4.1.42.1.10	Integer32	read-create	This object defines the average frame size for accounting for Meter/Shaping.
T/F cmQosShaperV2LowLatencyControl	1.3.6.1.4.1.2544.1.12.4.1.42.1.18	TruthValue	read-write	This object specifies low latency control whether enabled.
OPE cmQosShaperV2OperationalState	1.3.6.1.4.1.2544.1.12.4.1.42.1.3	OperationalState	read-only	This object represents the Operational State of the QOS ShaperV2.
ROW cmQosShaperV2RowStatus	1.3.6.1.4.1.2544.1.12.4.1.42.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosShaperV2RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosShaperV2RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosShaperV2RowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC cmQosShaperV2SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.42.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS QosShaperV2.
STO cmQosShaperV2StorageType	1.3.6.1.4.1.2544.1.12.4.1.42.1.11	StorageType	read-create	The type of storage configured for this entry.
cmQosShaperV2Table	1.3.6.1.4.1.2544.1.12.4.1.42		not-accessible	A list of entries corresponding to Quality of Service ShaperV2 for configuration purposes.
I32 cmQosShaperV2WFQWeight	1.3.6.1.4.1.2544.1.12.4.1.42.1.15	Integer32	read-write	Weight of queue to be scheduled by WFQ mechanism.
I32 cmQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.6.1.28	Integer32	read-write	This object specifies the wfq weight value.
U32 cmQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.6.1.23	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 cmQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.22	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 cmQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.21	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 cmQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.6.1.26	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
U32 cmQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.25	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 cmQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.24	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
T/F cmTrafficAclDstIpFilterEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.10	TruthValue	read-write	This object enable/disable Destination IPV4 or IPV6 address filter criteria.
IP cmTrafficAclDstIpV4Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.13	IpAddress	read-write	The destination IP address of Acl entry.
IP cmTrafficAclDstIpV4AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.14	IpAddress	read-write	The destination IP mask of Acl entry.
ADR cmTrafficAclDstIpV6Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.17	Ipv6Address	read-write	The destination IPV6 address of Acl entry.
ADR cmTrafficAclDstIpV6AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.18	Ipv6Address	read-write	The destination IPV6 mask of Acl entry.
MAC cmTrafficAclDstMacAddr	1.3.6.1.4.1.2544.1.12.4.1.38.1.7	MacAddress	read-write	The destination MAC address of Acl entry.
T/F cmTrafficAclDstMacAddrEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.8	TruthValue	read-write	This object enables/disables destination MAC address of Acl entry.
T/F cmTrafficAclEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.4	TruthValue	read-write	This object enables/disables the Acl entity.
CMT cmTrafficAclFilterAction	1.3.6.1.4.1.2544.1.12.4.1.38.1.2	CmTrafficAclFilterActionType	read-write	Currently, 'permit' and 'deny' are supported.
CMT cmTrafficAclFilterType	1.3.6.1.4.1.2544.1.12.4.1.38.1.3	CmTrafficAclFilterType	read-write	This object describes the Acl filter type.
CMT cmTrafficAclIpQosType	1.3.6.1.4.1.2544.1.12.4.1.38.1.25	CmTrafficACLPriorityType	read-write	This object describes QosType Acl entry.
T/F cmTrafficAclIpQosTypeEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.27	TruthValue	read-write	This object enables/disables qos type of acl entry.
I32 cmTrafficAclIpQosValue	1.3.6.1.4.1.2544.1.12.4.1.38.1.26	Integer32	read-write	This object describes QOS value of Acl entry.
cmTrafficAclProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.37.1		not-accessible	An entry containing information applicable to a system ACL Profile that can be configured.
I32 cmTrafficAclProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.37.1.1	Integer32	read-create	An arbitrary integer index value used to uniquely identify Traffic ACL profile entry.
STR cmTrafficAclProfileName	1.3.6.1.4.1.2544.1.12.4.1.37.1.2	DisplayString	read-write	This object describes the alias of the Acl profile entry.
ROW cmTrafficAclProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.37.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficAclProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficAclProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficAclProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
STO cmTrafficAclProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.37.1.3	StorageType	read-create	The type of storage configured for this entry.
cmTrafficAclProfileTable	1.3.6.1.4.1.2544.1.12.4.1.37		not-accessible	A list of entries corresponding to the Traffic Profile Rules Entry. It provides upto 4000 Traffic ACL Rules to be configured.
CMT cmTrafficAclProtocolType	1.3.6.1.4.1.2544.1.12.4.1.38.1.32	CmTrafficAclProtocolType	read-write	This object describes protocol type of Acl entry.
T/F cmTrafficAclProtocolTypeEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.33	TruthValue	read-write	This object enables/disables protocol type of Acl entry.
ROW cmTrafficAclRowStatus	1.3.6.1.4.1.2544.1.12.4.1.38.1.35	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficAclRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficAclRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficAclRowStatus object may be modified if the associated instance of this object is equal to active(1).
CMA cmTrafficAclRscAllocation	1.3.6.1.4.1.2544.1.12.4.1.44	CmAclConfiguration	read-write	This object is defined to set traffic acl resource allocation. Supported actions are: all-bk-l2(1) - all bank allocated to l2. all-bk-l2-ipv4(2) - all bank allocated to l2/ipv4. two-bk-l2-ipv4(3) - two thirds allocated to l2/ipv4, the left belongs to ipv6. one-bk-l2-ipv4(4) - one thirds allocated to l2/ipv4, the left belongs to ipv6. none-bk-l2-ipv4(5) - all bank allocated to ipv6.
cmTrafficAclRulesEntry	1.3.6.1.4.1.2544.1.12.4.1.38.1		not-accessible	An entry containing information applicable to a system ACL Rules that can be configured.
I32 cmTrafficAclRulesIndex	1.3.6.1.4.1.2544.1.12.4.1.38.1.1	Integer32	read-create	An arbitrary integer index value used to uniquely identify Traffic ACL profile entry. The manager may not assume any particular semantics or meaning to this index, except that it identifies a logical row in the table.
cmTrafficAclRulesTable	1.3.6.1.4.1.2544.1.12.4.1.38		not-accessible	A list of entries corresponding to the Traffic ACL Rules Entry.
T/F cmTrafficAclSrcIpFilterEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.9	TruthValue	read-write	This object enable/disable Source IPV4 or IPV6 address filter criteria.
IP cmTrafficAclSrcIpV4Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.11	IpAddress	read-write	The source IP address of Acl entry.
IP cmTrafficAclSrcIpV4AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.12	IpAddress	read-write	The source IP mask of Acl entry.
ADR cmTrafficAclSrcIpV6Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.15	Ipv6Address	read-write	The source IPV6 address of Acl entry.
ADR cmTrafficAclSrcIpV6AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.16	Ipv6Address	read-write	The source IPV6 mask of Acl entry.
MAC cmTrafficAclSrcMacAddr	1.3.6.1.4.1.2544.1.12.4.1.38.1.5	MacAddress	read-write	The source mac address of Acl entry.
T/F cmTrafficAclSrcMacAddrEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.6	TruthValue	read-write	This object enables/disables source MAC address of Acl entry.
STO cmTrafficAclStorageType	1.3.6.1.4.1.2544.1.12.4.1.38.1.34	StorageType	read-create	The type of storage configured for this entry.
T/F cmTrafficAclTcpUdpDstPortEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.24	TruthValue	read-write	This object enables/disables TCP/UDP destination port of Acl entry.
I32 cmTrafficAclTcpUdpDstPortMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.23	Integer32	read-write	This object describes TCP/UDP maximum destination port number of Acl entry.
I32 cmTrafficAclTcpUdpDstPortNum	1.3.6.1.4.1.2544.1.12.4.1.38.1.22	Integer32	read-write	This object describes TCP/UDP minimum destination port number of Acl entry.
T/F cmTrafficAclTcpUdpSrcPortEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.21	TruthValue	read-write	This object enables/disables TCP/UDP source port of Acl entry.
I32 cmTrafficAclTcpUdpSrcPortMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.20	Integer32	read-write	This object describes TCP/UDP maximum source port number of Acl entry.
I32 cmTrafficAclTcpUdpSrcPortNum	1.3.6.1.4.1.2544.1.12.4.1.38.1.19	Integer32	read-write	This object describes TCP/UDP minimum source port number of Acl entry.
VLA cmTrafficAclVlanId	1.3.6.1.4.1.2544.1.12.4.1.38.1.28	VlanId	read-write	This object describes the vlan Id of Acl entry.
T/F cmTrafficAclVlanIdEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.29	TruthValue	read-write	This object enables/disables Vlan Id of Acl entry.
I32 cmTrafficAclVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.38.1.30	Integer32	read-write	This object describes the Vlan Priority of Acl entry.
T/F cmTrafficAclVlanPriorityEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.31	TruthValue	read-write	This object enables/disables Vlan Priority of Acl entry.
cmTrafficPortLpbkGroup	1.3.6.1.4.1.2544.1.12.4.2.2.31			A collection of objects used to manage the traffic port lpbk group.
U32 cmTrafficPortQosShaperAdditionalCIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.15	Unsigned32	read-create	This object specifies the Higher 32 bits of additional CIR.
U32 cmTrafficPortQosShaperAdditionalCIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.14	Unsigned32	read-create	This object specifies the Lower 32 bits of additional CIR.
ADM cmTrafficPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.43.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
NUM cmTrafficPortQosShaperAssociatedQueueProfile	1.3.6.1.4.1.2544.1.12.4.1.43.1.5	VariablePointer	read-create	This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex.
I32 cmTrafficPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.43.1.6	Integer32	read-create	This object defines the buffer size of Shaper.
U32 cmTrafficPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.8	Unsigned32	read-create	This object specifies the Higher 32 bits of CIR.
U32 cmTrafficPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.7	Unsigned32	read-create	This object specifies the Lower 32 bits of CIR.
U32 cmTrafficPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.10	Unsigned32	read-create	This object specifies the Higher 32 bits of EIR.
U32 cmTrafficPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.9	Unsigned32	read-create	This object specifies the Lower 32 bits of EIR.
cmTrafficPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.43.1		not-accessible	A conceptual row in the cmTrafficPortQosShaperTable. These entries represent a Quality of Service Shaper.
cmTrafficPortQosShaperGroup	1.3.6.1.4.1.2544.1.12.4.2.2.51			A collection of objects used to manage the Ethernet Traffic Port QOS Shaper.
I32 cmTrafficPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.43.1.1	Integer32	read-create	The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
I32 cmTrafficPortQosShaperIngressAverageFrameSize	1.3.6.1.4.1.2544.1.12.4.1.43.1.13	Integer32	read-create	This object defines the average frame size for accounting for Meter/Shaping.
OPE cmTrafficPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.43.1.3	OperationalState	read-only	This object represents the Operational State of the QOS ShaperV2.
ROW cmTrafficPortQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.43.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficPortQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficPortQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficPortQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC cmTrafficPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.43.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS LagQosShaper.
STO cmTrafficPortQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.43.1.11	StorageType	read-create	The type of storage configured for this entry.
cmTrafficPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.43		not-accessible	A list of entries corresponding to Quality of Service Shaper for configuration purposes.
I32 cmTrafficPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.43.1.16	Integer32	read-write	This object specifies the wfq weight value of the QoS shaper.
cpdV2Group	1.3.6.1.4.1.2544.1.12.4.2.2.9			A collection of objects used to manage the Control Protocol Disposition version 2 function.
cpdV2TrafficPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.46			A collection of objects used to manage the Control Protocol Disposition version 2 function.
ADM e1t1AdminState	1.3.6.1.4.1.2544.1.12.4.1.50.1.5	AdminState	read-write	This object represents the Administrative State of the E1/T1.
PHY e1t1EntityIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
e1t1Entry	1.3.6.1.4.1.2544.1.12.4.1.50.1		not-accessible	A conceptual row in the e1t1Table.
E1T e1t1FrameFormat	1.3.6.1.4.1.2544.1.12.4.1.50.1.16	E1T1FrameFormat	read-write	This object represents the E1/T1 Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf, t1-esf and t1-unframed and the default value is t1-unframed. When the port is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. R5.4CC supports only t1-unframed for T1 Line type.
NUM e1t1IdlePatternProfile	1.3.6.1.4.1.2544.1.12.4.1.50.1.20	VariablePointer	read-write	This object allows selecting Idle Pattern Profile for the E1/T1 interface. Idle Patter Profile is represented by an object in the f3Pwe3IdlePatternProfileTable
NUM e1t1IfIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for E1/T1. An integer index value used to uniquely identify this E1/T1 interface.
U32 e1t1Index	1.3.6.1.4.1.2544.1.12.4.1.50.1.2	Unsigned32	not-accessible	Index value used to uniquely identify this E1/T1 interface, within the parent container specified by e1t1ParentIfIndex.
T/F e1t1InsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.50.1.12	TruthValue	read-write	This object allows to insert AIS out from E1/T1 when it is in maintenance state.
e1t1InterfaceGroup	1.3.6.1.4.1.2544.1.12.4.2.2.14			A collection of objects used to manage the E1/T1 Interface Group.
LIN e1t1LineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.50.1.17	LineBuildOut	read-write	This object represents Line Build Out on E1/T1 port.
E1T e1t1LineCode	1.3.6.1.4.1.2544.1.12.4.1.50.1.15	E1T1LineCode	read-write	This object represents the E1/T1 Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the port is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3.
E1T e1t1LineType	1.3.6.1.4.1.2544.1.12.4.1.50.1.14	E1T1LineType	read-only	This object represents the E1/T1 Line Type. Determines whether the E1/T1 interface operates in T1 or E1 mode.
CML e1t1LoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.50.1.8	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the E1/T1.
NUM e1t1LoopbackProfile	1.3.6.1.4.1.2544.1.12.4.1.50.1.21	VariablePointer	read-write	This object allows selecting Loopback Profile for the E1/T1 interface. Loopback Profile is represented by an object in the f3Pwe3LoopbackProfileTable
CML e1t1LoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.50.1.9	CmLoopbackType	read-only	This object provides status of the current loopback on the E1/T1.
I32 e1t1LoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.50.1.10	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the E1/T1.
OPE e1t1OperationalState	1.3.6.1.4.1.2544.1.12.4.1.50.1.6	OperationalState	read-only	This object represents the Operational State of the E1/T1.
NUM e1t1ParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.1	InterfaceIndex	not-accessible	This object represents the parent (container) object's interface index. In the case when parent of E1T1Entry does not have a InterfaceIndex then the e1t1ParentIfIndex shall have the value of 2147483647, e.g. if parent of E1T1Entry is a card represented in pseudoWireE1T1CardTable.
T/F e1t1PatternLpbkControl	1.3.6.1.4.1.2544.1.12.4.1.50.1.23	TruthValue	read-write	This object allows to enable or disable Pattern Loopback on a E1 port.
E1T e1t1RcvSensitivity	1.3.6.1.4.1.2544.1.12.4.1.50.1.19	E1T1RcvSensitivity	read-write	This object allows configuring the reciever sensitivity based on expected signal strength
NUM e1t1RelatedContainerId	1.3.6.1.4.1.2544.1.12.4.1.50.1.22	VariablePointer	read-only	This object describes the related container VCG.
T/F e1t1RemoteLoopbackRequest	1.3.6.1.4.1.2544.1.12.4.1.50.1.11	TruthValue	read-write	This object allows to specify to repond the remote loopback request or not.
ROW e1t1RowStatus	1.3.6.1.4.1.2544.1.12.4.1.50.1.13	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of e1t1RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with e1t1RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The e1t1RowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC e1t1SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.50.1.7	SecondaryState	read-only	This object represents the Secondary State of the E1/T1.
e1t1Table	1.3.6.1.4.1.2544.1.12.4.1.50		not-accessible	A list of entries corresponding to E1/T1.
NUM e1t1TimingDomain	1.3.6.1.4.1.2544.1.12.4.1.50.1.18	VariablePointer	read-write	This object represents Timing Domain that the E1/T1 interface uses as timing source. The Timing Domain is a Synchronization Entity represented by an object in the f3SyncTable
ADM e3t3AdminState	1.3.6.1.4.1.2544.1.12.4.1.51.1.5	AdminState	read-write	This object represents the Administrative State of the E3/T3.
T/F e3t3CBitEnable	1.3.6.1.4.1.2544.1.12.4.1.51.1.13	TruthValue	read-write	The object provides whether C-Bit Parity is enabled/disabled.
PHY e3t3EntityIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
e3t3Entry	1.3.6.1.4.1.2544.1.12.4.1.51.1		not-accessible	A conceptual row in the e3t3Table.
E3T e3t3FrameFormat	1.3.6.1.4.1.2544.1.12.4.1.51.1.16	E3T3FrameFormat	read-write	This object represents the Frame Format of the E3/T3.
NUM e3t3IfIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for E3/T3. An integer index value used to uniquely identify this E3/T3 interface.
U32 e3t3Index	1.3.6.1.4.1.2544.1.12.4.1.51.1.2	Unsigned32	not-accessible	This object is his index.
T/F e3t3InsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.51.1.12	TruthValue	read-write	This object allows to insert AIS out from E3/T3 when it is in maintenance state.
e3t3InterfaceGroup	1.3.6.1.4.1.2544.1.12.4.2.2.15			A collection of objects used to manage the E3/T3 Interface Group.
CML e3t3LoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.51.1.8	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the E3/T3.
CML e3t3LoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.51.1.9	CmLoopbackType	read-only	This object provides status of the current loopback on the E3/T3.
I32 e3t3LoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.51.1.10	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the E3/T3.
OPE e3t3OperationalState	1.3.6.1.4.1.2544.1.12.4.1.51.1.6	OperationalState	read-only	This object represents the Operational State of the E3/T3.
NUM e3t3ParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex.
NUM e3t3RelatedContainerId	1.3.6.1.4.1.2544.1.12.4.1.51.1.17	VariablePointer	read-only	This object describe the related contained VCG.
T/F e3t3RemoteLoopbackRequest	1.3.6.1.4.1.2544.1.12.4.1.51.1.11	TruthValue	read-write	This object allows to specify to repond the remote loopback request or not.
ROW e3t3RowStatus	1.3.6.1.4.1.2544.1.12.4.1.51.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of e3t3RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with e3t3RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The e3t3RowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC e3t3SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.51.1.7	SecondaryState	read-only	This object represents the Secondary State of the E3/T3.
T/F e3t3T3Channelized	1.3.6.1.4.1.2544.1.12.4.1.51.1.14	TruthValue	read-write	The object provides whether the T3 tunnel is channlized with T1.
e3t3Table	1.3.6.1.4.1.2544.1.12.4.1.51		not-accessible	A list of entries corresponding to E3/T3.
ethernetAccessPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.2			A collection of objects used to manage the F3 Ethernet Access Port function.
ethernetAccessPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.29			A collection of objects used to manage the F3 Ethernet Access Port JDSU extense function.
ethernetMgmtPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.4			A collection of objects used to manage the F3 Ethernet Management Port function.
ethernetNetworkPortExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.19			A collection of objects used to manage the F3 Ethernet Network Port extense function.
ethernetNetworkPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.3			A collection of objects used to manage the F3 Ethernet Network Port function.
ethernetNetworkPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.30			A collection of objects used to manage the F3 Ethernet Network Port JDSU extense function.
T/F f3AclRuleActive	1.3.6.1.4.1.2544.1.12.4.1.99.1.51	TruthValue	read-write	The ACL Rule Active activates/deactivates ACL Rule.
ADM f3AclRuleAdminState	1.3.6.1.4.1.2544.1.12.4.1.99.1.2	AdminState	read-write	This object allows user configure the Acl Rule in-service or management state.
STR f3AclRuleAlias	1.3.6.1.4.1.2544.1.12.4.1.99.1.3	F3DisplayString	read-write	The ACL rule alias.
I32 f3AclRuleCOS	1.3.6.1.4.1.2544.1.12.4.1.99.1.7	Integer32	read-write	The ACL rule class of service.
T/F f3AclRuleCosOverrideControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.6	TruthValue	read-write	The ACL rule COS Override control.
T/F f3AclRuleDstIpv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.38	TruthValue	read-write	The ACL rule Destination IPv4 Adress control whether enabled.
IP f3AclRuleDstIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.40	IpAddress	read-write	The ACL rule destination ipv4 adress high limit.
IP f3AclRuleDstIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.39	IpAddress	read-write	The ACL rule Destination IPv4 Adress low limit.
ADR f3AclRuleDstIpv6Address	1.3.6.1.4.1.2544.1.12.4.1.99.1.56	Ipv6Address	read-write	The ACL rule destination ipv6 adress.
T/F f3AclRuleDstIpv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.55	TruthValue	read-write	The ACL rule destination ipv6 Adress is control enabled.
I32 f3AclRuleDstIpv6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.4.1.99.1.57	Integer32	read-write	The ACL rule destination ipv6 prefix length.
MAC f3AclRuleDstMacAddress	1.3.6.1.4.1.2544.1.12.4.1.99.1.12	MacAddress	read-write	The ACL rule dynamic Destination MAC address.
T/F f3AclRuleDstMacAddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.11	TruthValue	read-write	The ACL rule dynamic Destination MAC address control.
MAC f3AclRuleDstMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.99.1.13	MacAddress	read-write	The ACL rule dynamic Destination MAC address mask.
T/F f3AclRuleDstPortControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.44	TruthValue	read-write	The ACL rule destination port whether enabled.
I32 f3AclRuleDstPortHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.46	Integer32	read-write	The ACL rule destination port low limit.
I32 f3AclRuleDstPortLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.45	Integer32	read-write	The ACL rule destination port low limit.
f3AclRuleEntry	1.3.6.1.4.1.2544.1.12.4.1.99.1		not-accessible	A conceptual row in the f3AclRuleTable.
I32 f3AclRuleEtherType	1.3.6.1.4.1.2544.1.12.4.1.99.1.29	Integer32	read-write	The ACL rule outer vlan ether type.
T/F f3AclRuleEtherTypeControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.28	TruthValue	read-write	The ACL rule outer vlan ether type control.
f3AclRuleGroup	1.3.6.1.4.1.2544.1.12.4.2.2.47			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint ACL Rule.
I32 f3AclRuleIndex	1.3.6.1.4.1.2544.1.12.4.1.99.1.1	Integer32	not-accessible	The ACL rule number.
T/F f3AclRuleInnerVlanPcpControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.23	TruthValue	read-write	The ACL rule inner vlan PCP control.
VLA f3AclRuleInnerVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.25	VlanPriority	read-write	The ACL rule inner vlan PCP priority high limit.
VLA f3AclRuleInnerVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.24	VlanPriority	read-write	The ACL rule inner vlan PCP priority low limit.
T/F f3AclRuleInnerVlanVIDControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.17	TruthValue	read-write	The ACL rule inner VID control.
VLA f3AclRuleInnerVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.19	VlanId	read-write	The ACL rule Inner Vlan ID high limit.
VLA f3AclRuleInnerVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.18	VlanId	read-write	The ACL rule inner Vlan ID low limit.
T/F f3AclRuleIpv4PriorityControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.30	TruthValue	read-write	The ACL rule IPv4 Priority control whether enabled.
I32 f3AclRuleIpv4PriorityHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.32	Integer32	read-write	The ACL rule ipv4 priority high limit.
I32 f3AclRuleIpv4PriorityLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.31	Integer32	read-write	The ACL rule IPv4 priority low limit.
I32 f3AclRuleIpV6FlowLabel	1.3.6.1.4.1.2544.1.12.4.1.99.1.59	Integer32	read-write	The ACL rule ipv6 Flow Label.
T/F f3AclRuleIpV6FlowLabelControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.58	TruthValue	read-write	The ACL rule ipv6 Flow Label Control enables/disables Flow Label.
ACL f3AclRuleOperation	1.3.6.1.4.1.2544.1.12.4.1.99.1.5	AclRuleOperation	read-write	The ACL rule action.
U32 f3AclRuleOuterVlanDei	1.3.6.1.4.1.2544.1.12.4.1.99.1.27	Unsigned32	read-write	The ACL rule outer vlan DEI.
T/F f3AclRuleOuterVlanDeiControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.26	TruthValue	read-write	The ACL rule outer vlan DEI control.
T/F f3AclRuleOuterVlanPcpControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.20	TruthValue	read-write	The ACL rule outer vlan PCP control.
VLA f3AclRuleOuterVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.22	VlanPriority	read-write	The ACL rule outer vlan PCP priority high limit.
VLA f3AclRuleOuterVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.21	VlanPriority	read-write	The ACL rule outer vlan PCP priority low limit.
T/F f3AclRuleOuterVlanVIDControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.14	TruthValue	read-write	The ACL rule outer VID control.
VLA f3AclRuleOuterVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.16	VlanId	read-write	The ACL rule outer Vlan ID high limit.
VLA f3AclRuleOuterVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.15	VlanId	read-write	The ACL rule outer Vlan ID low limit.
I32 f3AclRulePriority	1.3.6.1.4.1.2544.1.12.4.1.99.1.4	Integer32	read-write	The ACL rule priority.
T/F f3AclRulePriorityControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.60	TruthValue	read-write	The ACL rule Priority control whether enabled.
I32 f3AclRulePriorityHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.62	Integer32	read-write	The ACL rule priority high limit.
I32 f3AclRulePriorityLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.61	Integer32	read-write	The ACL rule priority low limit.
T/F f3AclRuleProtocolControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.33	TruthValue	read-write	The ACL rule protocol control whether enabled.
I32 f3AclRuleProtocolNumber	1.3.6.1.4.1.2544.1.12.4.1.99.1.34	Integer32	read-write	The ACL rule protocol number.
ROW f3AclRuleRowStatus	1.3.6.1.4.1.2544.1.12.4.1.99.1.50	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3AclRuleSrcIpv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.35	TruthValue	read-write	The ACL rule source IPv4 Adress control whether enabled.
IP f3AclRuleSrcIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.37	IpAddress	read-write	The ACL rule source ipv4 adress high limit.
IP f3AclRuleSrcIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.36	IpAddress	read-write	The ACL rule source IPv4 Adress low limit.
ADR f3AclRuleSrcIpv6Address	1.3.6.1.4.1.2544.1.12.4.1.99.1.53	Ipv6Address	read-write	The ACL rule source ipv6 adress high limit.
T/F f3AclRuleSrcIpv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.52	TruthValue	read-write	The ACL rule source ipv6 adress is control enabled.
I32 f3AclRuleSrcIpv6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.4.1.99.1.54	Integer32	read-write	The ACL rule source ipv6 prefix length.
MAC f3AclRuleSrcMacAddress	1.3.6.1.4.1.2544.1.12.4.1.99.1.9	MacAddress	read-write	The ACL rule dynamic Source MAC address.
T/F f3AclRuleSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.8	TruthValue	read-write	The ACL rule Source MAC address control.
MAC f3AclRuleSrcMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.99.1.10	MacAddress	read-write	The ACL rule dynamic Source MAC address mask.
T/F f3AclRuleSrcPortControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.41	TruthValue	read-write	The ACL rule source port whether enabled.
I32 f3AclRuleSrcPortHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.43	Integer32	read-write	The ACL rule source port low limit.
I32 f3AclRuleSrcPortLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.42	Integer32	read-write	The ACL rule source port low limit.
STO f3AclRuleStorageType	1.3.6.1.4.1.2544.1.12.4.1.99.1.49	StorageType	read-create	The type of storage configured for this entry.
f3AclRuleTable	1.3.6.1.4.1.2544.1.12.4.1.99		not-accessible	A list of entries for the L2 ACL rule.
I32 f3AclRuleTcpFlags	1.3.6.1.4.1.2544.1.12.4.1.99.1.48	Integer32	read-write	The ACL rule outer vlan TCP flags.
T/F f3AclRuleTcpFlagsControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.47	TruthValue	read-write	The ACL rule outer vlan TCP flags control.
NUM f3EnvelopeAssocPolicer	1.3.6.1.4.1.2544.1.12.4.1.83.1.1	VariablePointer	read-only	Pointer to a policer instance which is associated with envelope.
f3EnvelopeAssocPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.83.1		not-accessible	A conceptual row in the f3EnvelopeAssocPolicerTable.
f3EnvelopeAssocPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.83		not-accessible	A list of entries corresponding to Flows which are envelope associated policers instance
T/F f3EthernetTrafficPortExpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.101.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming Exp value.
f3EthernetTrafficPortExpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.101.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEDecTable.
I32 f3EthernetTrafficPortExpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.101.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible decoding table.
VLA f3EthernetTrafficPortExpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.101.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA f3EthernetTrafficPortExpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.101.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming Exp value.
f3EthernetTrafficPortExpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.101		not-accessible	Ethernet Traffic Port Exp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
VLA f3EthernetTrafficPortExpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.102.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA f3EthernetTrafficPortExpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.102.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA f3EthernetTrafficPortExpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.100.1.4	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop eligibility encoded into it.
VLA f3EthernetTrafficPortExpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.100.1.3	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop ineligibility encoded into it.
f3EthernetTrafficPortExpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.100.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEEncTable.
I32 f3EthernetTrafficPortExpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.100.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible encoding table.
VLA f3EthernetTrafficPortExpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.100.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
f3EthernetTrafficPortExpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.100		not-accessible	Ethernet Traffic Port Exp drop eligibility encoding table. This is applied to a frame that is egressing at the Traffic Port.
f3EthernetTrafficPortExpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.48			A collection of objects used to manage the F3 Ethernet Traffic Port Exp De Decoding/Encoding group function.
f3EthernetTrafficPortExpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.102.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEPairEntry.
I32 f3EthernetTrafficPortExpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.102.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible priority pair table.
f3EthernetTrafficPortExpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.102		not-accessible	Ethernet Traffic Port Exp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the Exp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
CMA f3FlowPointCpdV2ActiveControlProtocols	1.3.6.1.4.1.2544.1.12.4.1.98.1.23	CmActiveControlProtocolsType	read-only	List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
CMC f3FlowPointCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC f3FlowPointCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC f3FlowPointCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.43	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC f3FlowPointCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC f3FlowPointCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC f3FlowPointCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.24	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
f3FlowPointCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.98.1		not-accessible	A conceptual row in the f3FlowPointCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Flow Point.
CMC f3FlowPointCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.22	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC f3FlowPointCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC f3FlowPointCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
I32 f3FlowPointCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.98.1.1	Integer32	not-accessible	Unique Index value to access the CPD row.
CMC f3FlowPointCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.2	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC f3FlowPointCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC f3FlowPointCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC f3FlowPointCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC f3FlowPointCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC f3FlowPointCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.25	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC f3FlowPointCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.26	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC f3FlowPointCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.27	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC f3FlowPointCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.28	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC f3FlowPointCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.29	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC f3FlowPointCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC f3FlowPointCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC f3FlowPointCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC f3FlowPointCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC f3FlowPointCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC f3FlowPointCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC f3FlowPointCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC f3FlowPointCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC f3FlowPointCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC f3FlowPointCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC f3FlowPointCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC f3FlowPointCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.41	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC f3FlowPointCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.42	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC f3FlowPointCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC f3FlowPointCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC f3FlowPointCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC f3FlowPointCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC f3FlowPointCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
f3FlowPointCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.98		not-accessible	A list of entries corresponding to Flow Point Control Protocol Disposition V2.
CMC f3FlowPointCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC f3FlowPointCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC f3FlowPointCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC f3FlowPointCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
ADM f3FpQosPolicerAdminState	1.3.6.1.4.1.2544.1.12.4.1.96.1.2	AdminState	read-create	This object represents the Administrative State of a Policer.
POL f3FpQosPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.4.1.96.1.11	PolicerAlgorithmType	read-only	This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
I32 f3FpQosPolicerCBS	1.3.6.1.4.1.2544.1.12.4.1.96.1.9	Integer32	read-create	This object represents the Commited Burst Size (CBS) of a Policer.
U32 f3FpQosPolicerCIRHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.
U32 f3FpQosPolicerCIRLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.
U32 f3FpQosPolicerCIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.17	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits.
U32 f3FpQosPolicerCIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.18	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.
POL f3FpQosPolicerColorMode	1.3.6.1.4.1.2544.1.12.4.1.96.1.12	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F f3FpQosPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.96.1.13	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
I32 f3FpQosPolicerEBS	1.3.6.1.4.1.2544.1.12.4.1.96.1.10	Integer32	read-create	This object represents the Excess Burst Size (EBS) of a Policer.
U32 f3FpQosPolicerEIRHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
U32 f3FpQosPolicerEIRLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
U32 f3FpQosPolicerEIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.19	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits.
U32 f3FpQosPolicerEIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.20	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits.
f3FpQosPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.96.1		not-accessible	A conceptual row in the f3FpQosPolicerTable. These entries represent an Flow Point Quality of Service Policer.
NUM f3FpQosPolicerEnvelopeObject	1.3.6.1.4.1.2544.1.12.4.1.96.1.21	VariablePointer	read-write	This object allows specification of envelope object.
f3FpQosPolicerGroup	1.3.6.1.4.1.2544.1.12.4.2.2.45			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint Policer.
I32 f3FpQosPolicerIndex	1.3.6.1.4.1.2544.1.12.4.1.96.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
OPE f3FpQosPolicerOperationalState	1.3.6.1.4.1.2544.1.12.4.1.96.1.3	OperationalState	read-only	This object represents the Operational State of a Policer.
T/F f3FpQosPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.96.1.14	TruthValue	read-create	This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.
I32 f3FpQosPolicerRank	1.3.6.1.4.1.2544.1.12.4.1.96.1.22	Integer32	read-write	This object allows specification of rank value.
ROW f3FpQosPolicerRowStatus	1.3.6.1.4.1.2544.1.12.4.1.96.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3FpQosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3FpQosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3FpQosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC f3FpQosPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.96.1.4	SecondaryState	read-only	This object represents the Secondary State of a Policer.
STO f3FpQosPolicerStorageType	1.3.6.1.4.1.2544.1.12.4.1.96.1.15	StorageType	read-create	The type of storage configured for this entry.
f3FpQosPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.96		not-accessible	A list of entries corresponding to Flow Point Quality of Service Policer for configuration purposes.
ADM f3FpQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.95.1.2	AdminState	read-create	This object represents the Administrative State of a Shaper.
U32 f3FpQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.95.1.11	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
U32 f3FpQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.95.1.9	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of a Shaper.
U32 f3FpQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.95.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.
U32 f3FpQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.95.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.
I32 f3FpQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.95.1.12	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
U32 f3FpQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.95.1.10	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of a Shaper.
U32 f3FpQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.95.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3FpQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.95.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
f3FpQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.95.1		not-accessible	A conceptual row in the f3FpQosShaperTable. These entries represent an Flow Point Quality of Service Shaper.
f3FpQosShaperGroup	1.3.6.1.4.1.2544.1.12.4.2.2.44			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint Shaper.
I32 f3FpQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.95.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Shaper.
OPE f3FpQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.95.1.3	OperationalState	read-only	This object represents the Operational State of a Shaper.
ROW f3FpQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.95.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3FpQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3FpQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3FpQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC f3FpQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.95.1.4	SecondaryState	read-only	This object represents the Secondary State of the Shaper.
STO f3FpQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.95.1.13	StorageType	read-create	The type of storage configured for this entry.
f3FpQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.95		not-accessible	A list of entries corresponding to Flow Point Quality of Service Shaper for configuration purposes.
I32 f3FpQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.95.1.15	Integer32	read-write	This object represents the wfq weight of the QoS Shaper.
f3Gps10MhzPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.18			A collection of objects used to manage the F3 GPS 10 Mhz Port Group.
ADM f3GPSReceiverPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.57.1.4	AdminState	read-write	This object represents the Administrative State of the GPS Receiver Port.
I32 f3GPSReceiverPortAGC	1.3.6.1.4.1.2544.1.12.4.1.57.1.41	Integer32	read-only	This object represents the Automatic Gain Control (AGC) level for the GNSS receiver.
STR f3GPSReceiverPortAlias	1.3.6.1.4.1.2544.1.12.4.1.57.1.18	DisplayString	read-create	This object provides an alias to the GPS port
U32 f3GPSReceiverPortAntennaCableLength	1.3.6.1.4.1.2544.1.12.4.1.57.1.8	Unsigned32	read-write	This object allows for configuration of the GPS Antenna cable length in meters. This object is deprecated and replaced by f3GPSReceiverPortAntennaDelayValue.
DEL f3GPSReceiverPortAntennaDelayType	1.3.6.1.4.1.2544.1.12.4.1.57.1.20	DelayOption	read-write	This object configures GNSS antenna cable delay type (units)
I32 f3GPSReceiverPortAntennaDelayValue	1.3.6.1.4.1.2544.1.12.4.1.57.1.19	Integer32	read-write	This object configures GNSS antenna cable delay used by the GNSS Receiver Port, in units determined by f3GPSReceiverPortAntennaDelayType object.
GPS f3GPSReceiverPortAntennaStatus	1.3.6.1.4.1.2544.1.12.4.1.57.1.9	GPSAntennaStatus	read-only	This object provides the GPS Receiver Port Antenna status.
U32 f3GPSReceiverPortCNOMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.21	Unsigned32	read-write	This object configures the C/No mask in dB-Hz units, used by the GNSS Receiver Port.
U32 f3GPSReceiverPortCoordinateAltitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.25	Unsigned32	read-only	This object provides the GNSS Receiver Port coordinate altitude in meters.
STR f3GPSReceiverPortCoordinateLatitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.23	DisplayString	read-write	This object provides the GNSS Receiver Port coordinate latitude in the following format: N\|Sddd:mm:ss.sss (d=degrees, m=minutes, s=seconds) e.g. N37:22:44.123.
STR f3GPSReceiverPortCoordinateLongitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.24	DisplayString	read-write	This object provides the GNSS Receiver Port coordinate longitude in the following format: E\|Wddd:mm:ss.sss (d=degrees, m=minutes, s=seconds) e.g. E157:53:33.456.
STR f3GPSReceiverPortCoordinateStringAltitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.33	DisplayString	read-write	When Self Survey Control is disabled, this object configures the GNSS Receiver Port altitude in meters. The altitude is of the form [+/-]XXXXX[.Y] where XXXXX can be any between -400 and 10000 value and Y allows precision of 1 decimal after the floating point. Note that the sign and .Y are optional. When Self Survey Control is enabled, this object is not configurable and displays the GNSS Receiver Port altitude in meters.
U32 f3GPSReceiverPortElevationMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.22	Unsigned32	read-write	This object configures the elevation mask in degrees, used by the GNSS Receiver Port.
PHY f3GPSReceiverPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
f3GPSReceiverPortEntry	1.3.6.1.4.1.2544.1.12.4.1.57.1		not-accessible	A conceptual row in the f3GPSReceiverPortTable.
U32 f3GPSReceiverPortFailureSuspendTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.48	Unsigned32	read-write	This object represents the Failure Suspend Time for the GNSS receiver.
I32 f3GPSReceiverPortFirmwareUpgradePercent	1.3.6.1.4.1.2544.1.12.4.1.57.1.26	Integer32	read-only	This object describes the firmware upgrade percent value. Note: value 255 means NA.
TOG f3GPSReceiverPortForcedAntennaConnected	1.3.6.1.4.1.2544.1.12.4.1.57.1.37	ToggleValue	read-write	This object allows to manage the antenna connected mode on OSA540X.
DYN f3GPSReceiverPortGnssDynamicModel	1.3.6.1.4.1.2544.1.12.4.1.57.1.53	DynamicModelType	read-write	This object defines the dynamic model of GNSS. For example, whether the GNSS receiver is stationary, automotive etc.
CON f3GPSReceiverPortGnssSystem	1.3.6.1.4.1.2544.1.12.4.1.57.1.14	ConstellationType	read-write	This object configure Constellation Type of the GPS Antenna.
CON f3GPSReceiverPortGnssSystemsBitMap	1.3.6.1.4.1.2544.1.12.4.1.57.1.17	ConstellationTypesBitMap	read-write	This object configures GNSS constellation types supported by a GNSS Receiver Port
DAT f3GPSReceiverPortGnssTOD	1.3.6.1.4.1.2544.1.12.4.1.57.1.16	DateAndTime	read-only	This object provides the last time was executed.
f3GPSReceiverPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.20			A collection of objects used to manage the F3 GPS Receiver Port Group.
U32 f3GPSReceiverPortHDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.46	Unsigned32	read-only	This object provides the dimensionless HDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet or the receiver is in navigation mode. The value is expressed in hundredth of the HDOP definition. For instance, a value of 153 means that HDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the minimum range value 0.
U32 f3GPSReceiverPortHorizontalAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.43	Unsigned32	read-only	This object represents the horizontal accuracy (in millimeters) of the position fix determined by the GNSS receiver.
NUM f3GPSReceiverPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this GPS Receiver Port.
I32 f3GPSReceiverPortIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this GPS Receiver Port within the card.
INS f3GPSReceiverPortInstallationType	1.3.6.1.4.1.2544.1.12.4.1.57.1.15	InstallationType	read-write	This object configure Installation Type of the GPS Antenna.
LOC f3GPSReceiverPortLocationMode	1.3.6.1.4.1.2544.1.12.4.1.57.1.34	LocationMode	read-write	This object allows to manage location mode for the GNSS receiver on OSA540X.
U32 f3GPSReceiverPortNumTrackingSatellites	1.3.6.1.4.1.2544.1.12.4.1.57.1.11	Unsigned32	read-only	This object provides information on the number of tracking satellites.
OPE f3GPSReceiverPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.57.1.5	OperationalState	read-only	This object represents the Operational State of the GPS Receiver Port.
U32 f3GPSReceiverPortPDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.31	Unsigned32	read-only	This object provides the dimensionless PDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet. The value is expressed in hundredth of the PDOP definition. For instance, a value of 153 means that PDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the maximum range value 4095.
U32 f3GPSReceiverPortPDOPMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.27	Unsigned32	read-write	This object configures PDOP Mask used by the GNSS Receiver. The mask value is expressed in hundredth of the PDOP definition value and it is rounded to the nearest multiple of hundreds. For instance, a value of 200 means that GNSS Receiver stops collecting data when f3GPSReceiverPortPDOP value exceeds 200.
PPS f3GPSReceiverPortPPSGenCondition	1.3.6.1.4.1.2544.1.12.4.1.57.1.7	PPSGenCondition	read-write	This object allows for configuration of the PPS generation condition. PPS is generated when at least one satellite is tracked or when at least three satellites are tracked.
T/F f3GPSReceiverPortPPSGeneratedFlag	1.3.6.1.4.1.2544.1.12.4.1.57.1.13	TruthValue	read-only	This object indicates whether there are enough usable satellites to provide accurate PPS output.
T/F f3GPSReceiverPortSatellitesUsableFlag	1.3.6.1.4.1.2544.1.12.4.1.57.1.10	TruthValue	read-only	This object provides information on whether the satellites are usable. It is set to TRUE, when ephemeris and health data for at least one satellite is available.
U32 f3GPSReceiverPortSatMin1Threshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.29	Unsigned32	read-write	This object configures the first threshold for the minimum of satellites used by the GNSS Receiver. SatMin1 must be stricly greater than SatMin2.
U32 f3GPSReceiverPortSatMin2Threshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.30	Unsigned32	read-write	This object configures the second threshold for the minimum of satellites used by the GNSS Receiver. SatMin1 must be stricly greater than SatMin2.
SEC f3GPSReceiverPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.57.1.6	SecondaryState	read-only	This object represents the Secondary State of the GPS Receiver Port.
TOG f3GPSReceiverPortSelfSurveyControl	1.3.6.1.4.1.2544.1.12.4.1.57.1.32	ToggleValue	read-write	This object allows to enable or disable the automatic location control. When it is enabled, the location of the equipment is evaluated by GNSS Receiver. When it is disabled the position is given by Coordinate Lattitude, Coordinate Longitude, and Altitude.
U32 f3GPSReceiverPortSelfSurveyPeriod	1.3.6.1.4.1.2544.1.12.4.1.57.1.28	Unsigned32	read-write	This object configures the Self Survey Period used by the GNSS Receiver.
U32 f3GPSReceiverPortSelfSurveyPositionAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.42	Unsigned32	read-write	This object configures the Self Survey Position accuracy threshold (in millimeters) used by the GNSS Receiver.
U32 f3GPSReceiverPortSelfSurveyProgress	1.3.6.1.4.1.2544.1.12.4.1.57.1.12	Unsigned32	read-only	This object provides information on the percentage of fixes collected so far.
STR f3GPSReceiverPortServiceAvailablePercentage	1.3.6.1.4.1.2544.1.12.4.1.57.1.40	DisplayString	read-only	This object allows to manage service available in percentage [XXX.YY%] for GNSS.
U32 f3GPSReceiverPortServiceAvailableTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.38	Unsigned32	read-only	This object allows to manage service available time (seconds) for GNSS.
U32 f3GPSReceiverPortServiceUnavailableTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.39	Unsigned32	read-only	This object allows to manage service unavailable time (seconds) for GNSS.
U32 f3GPSReceiverPortSpoofingLocationDifference	1.3.6.1.4.1.2544.1.12.4.1.57.1.52	Unsigned32	read-only	This object provides the calculated Location difference (in meters) based on position information provided by default and secondary GNSS receivers in 5405.
U32 f3GPSReceiverPortSpoofingLocationThreshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.51	Unsigned32	read-write	This object defines the threshold (in meters) for generating Location spoofing alarm in 5405.
U32 f3GPSReceiverPortSpoofingPpsDifference	1.3.6.1.4.1.2544.1.12.4.1.57.1.50	Unsigned32	read-only	This object provides the calculated PPS difference (in nanoseconds ) provided by default and secondary GNSS receivers in 5405.
U32 f3GPSReceiverPortSpoofingPpsThreshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.49	Unsigned32	read-write	This object defines the threshold (in nanoseconds ) for generating PPS spoofing alarm in 5405.
f3GPSReceiverPortTable	1.3.6.1.4.1.2544.1.12.4.1.57		not-accessible	A list of entries corresponding to the GPS Receiver Port Facilities.
U32 f3GPSReceiverPortTDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.45	Unsigned32	read-only	This object provides the dimensionless TDOP value calculated by the GNSS Receiver. The value is expressed in hundredth of the TDOP definition. For instance, a value of 153 means that TDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver, the value is shown with the minimum range value 0.
TIM f3GPSReceiverPortTimeAdvanceMode	1.3.6.1.4.1.2544.1.12.4.1.57.1.35	TimeAdvanceMode	read-write	This object allows to manage time advance mode for the GNSS on OSA540X.
I32 f3GPSReceiverPortTimeAdvanceValue	1.3.6.1.4.1.2544.1.12.4.1.57.1.36	Integer32	read-write	This object allows to configure time advance value (ns) for the GNSS on OSA540X.
U32 f3GPSReceiverPortVDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.47	Unsigned32	read-only	This object provides the dimensionless VDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet or the receiver is in navigation mode. The value is expressed in hundredth of the VDOP definition. For instance, a value of 153 means that VDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the minimum range value 0.
U32 f3GPSReceiverPortVerticalAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.44	Unsigned32	read-only	This object represents the vertical accuracy (in millimeters) of the position fix determined by the GNSS receiver.
ADM f3IrigOpticalOutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.107.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
STR f3IrigOpticalOutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.107.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
IRI f3IrigOpticalOutputPortControlField	1.3.6.1.4.1.2544.1.12.4.1.107.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
PHY f3IrigOpticalOutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
f3IrigOpticalOutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.107.1		not-accessible	A conceptual row in the f3IrigOpticalOutputPortTable.
NUM f3IrigOpticalOutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
I32 f3IrigOpticalOutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG optical output port in it parent card.
OPE f3IrigOpticalOutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.107.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
SEC f3IrigOpticalOutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.107.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
f3IrigOpticalOutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.107		not-accessible	A list of entries corresponding to IRIG Optical output ports.
IRI f3IrigOpticalOutputPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.107.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
STR f3IrigOutputGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.109.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output group entity.
PHY f3IrigOutputGroupEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
f3IrigOutputGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.109.1		not-accessible	A conceptual row in the f3IrigOutputGroupTable.
T/F f3IrigOutputGroupExtensionDetection	1.3.6.1.4.1.2544.1.12.4.1.109.1.6	TruthValue	read-only	This object allows to manage the Control field of the IRIG output group.
IRI f3IrigOutputGroupExtensionType	1.3.6.1.4.1.2544.1.12.4.1.109.1.5	IrigGroupExtensionType	read-write	This object allows to manage the Time Code of the IRIG output group.
NUM f3IrigOutputGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
I32 f3IrigOutputGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG output group in its parent card.
f3IrigOutputGroupTable	1.3.6.1.4.1.2544.1.12.4.1.109		not-accessible	A list of entries corresponding to output groups.
ADM f3IrigOutputUnitPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.110.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
STR f3IrigOutputUnitPortAlias	1.3.6.1.4.1.2544.1.12.4.1.110.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
IRI f3IrigOutputUnitPortControlField	1.3.6.1.4.1.2544.1.12.4.1.110.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
IRI f3IrigOutputUnitPortDigitalVoltage	1.3.6.1.4.1.2544.1.12.4.1.110.1.11	IrigDigitalSignalVoltage	read-write	This object allows to manage, for digital output type only, the voltage of the IRIG output port.
PHY f3IrigOutputUnitPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
f3IrigOutputUnitPortEntry	1.3.6.1.4.1.2544.1.12.4.1.110.1		not-accessible	A conceptual row in the f3IrigOutputUnitPortTable.
NUM f3IrigOutputUnitPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
I32 f3IrigOutputUnitPortIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG output unit port in its output group.
OPE f3IrigOutputUnitPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.110.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
SEC f3IrigOutputUnitPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.110.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
f3IrigOutputUnitPortTable	1.3.6.1.4.1.2544.1.12.4.1.110		not-accessible	A list of entries corresponding to IRIG output unit ports in IRIG output groups for management purposes.
IRI f3IrigOutputUnitPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.110.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
IRI f3IrigOutputUnitPortType	1.3.6.1.4.1.2544.1.12.4.1.110.1.10	IrigOutputType	read-write	This object allows to manage the output type, digital or analogous, of the IRIG output port.
f3IrigPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.52			A collection of objects used to manage IRIG Card and Port.
ADM f3IrigRelayOutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.108.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
STR f3IrigRelayOutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.108.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
PHY f3IrigRelayOutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
f3IrigRelayOutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.108.1		not-accessible	A conceptual row in the f3IrigRelayOutputPortTable.
NUM f3IrigRelayOutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
I32 f3IrigRelayOutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG time relay output port in its parent card.
OPE f3IrigRelayOutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.108.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
IRI f3IrigRelayOutputPortRelayOperation	1.3.6.1.4.1.2544.1.12.4.1.108.1.8	IrigRelayOperation	read-write	This object allows to manage the relay operation of the IRIG output port.
SEC f3IrigRelayOutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.108.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
f3IrigRelayOutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.108		not-accessible	A list of entries corresponding to IRIG time relay output ports.
ADM f3IrigRs422OutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.106.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
STR f3IrigRs422OutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.106.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
IRI f3IrigRs422OutputPortControlField	1.3.6.1.4.1.2544.1.12.4.1.106.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
PHY f3IrigRs422OutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
f3IrigRs422OutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.106.1		not-accessible	A conceptual row in the f3IrigRs422OutputPortTable.
NUM f3IrigRs422OutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
I32 f3IrigRs422OutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG RS422 output port in its parent card.
OPE f3IrigRs422OutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.106.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
SEC f3IrigRs422OutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.106.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
f3IrigRs422OutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.106		not-accessible	A list of entries corresponding to IRIG RS422 output ports.
IRI f3IrigRs422OutputPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.106.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
ADM f3NetPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.45.1.3	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
I32 f3NetPortQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.45.1.24	Integer32	read-write	This object specifies the average frame size before fragmentation.
U32 f3NetPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.45.1.12	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
U32 f3NetPortQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.45.1.10	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 f3NetPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 f3NetPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.6	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
I32 f3NetPortQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.45.1.13	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
TRA f3NetPortQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.45.1.2	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
U32 f3NetPortQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.45.1.11	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 f3NetPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.8	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
f3NetPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.45.1		not-accessible	A conceptual row in the f3NetPortQosShaperTable. These entries represent a Quality of Service Shaper.
I32 f3NetPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.45.1.1	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper.
OPE f3NetPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.45.1.4	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
SEC f3NetPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.45.1.5	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
U32 f3NetPortQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.15	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.
U32 f3NetPortQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.14	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.
U32 f3NetPortQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.17	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.16	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
f3NetPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.45		not-accessible	A list of entries corresponding to Ethernet Network Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Network Port is in evpl mode and are relevant for traffic in the access to network direction.
I32 f3NetPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.45.1.25	Integer32	read-write	This object specifies the wfq weight value.
U32 f3NetPortQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.45.1.20	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 f3NetPortQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.19	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 f3NetPortQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.18	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 f3NetPortQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.45.1.23	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
U32 f3NetPortQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.22	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 f3NetPortQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.21	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
T/F f3PolicerEnvelopeCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.82.1.2	TruthValue	read-write	This object allows specification of Policer Envelope Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level
f3PolicerEnvelopeEntry	1.3.6.1.4.1.2544.1.12.4.1.82.1		not-accessible	A conceptual row in the f3PolicerEnvelopeTable.
f3PolicerEnvelopeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.38			A collection of objects used to manage the policer envelope group function.
I32 f3PolicerEnvelopeIndex	1.3.6.1.4.1.2544.1.12.4.1.82.1.1	Integer32	not-accessible	An integer index value used to uniquely identify policer envelope.
ROW f3PolicerEnvelopeRowStatus	1.3.6.1.4.1.2544.1.12.4.1.82.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PolicerEnvelopeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UsbWIFIDonglePortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PolicerEnvelopeRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
STO f3PolicerEnvelopeStorageType	1.3.6.1.4.1.2544.1.12.4.1.82.1.3	StorageType	read-create	The type of storage configured for this entry.
f3PolicerEnvelopeTable	1.3.6.1.4.1.2544.1.12.4.1.82		not-accessible	A list of entries corresponding to policer envelope for configuration purposes.
ADM f3PulsePerSecondPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.53.1.4	AdminState	read-write	This object represents the Administrative State of the Pulse Per Second Port.
STR f3PulsePerSecondPortAlias	1.3.6.1.4.1.2544.1.12.4.1.53.1.21	DisplayString	read-create	This object allows SNMP management entities to provide an alias to the PPS port.
U32 f3PulsePerSecondPortAssumedClockClass	1.3.6.1.4.1.2544.1.12.4.1.53.1.22	Unsigned32	read-write	This object allows specification of the Assumed Clock Class for an input PPS port. It is only an indication and cannot be set for an output PPS Port.
U32 f3PulsePerSecondPortClockAccuracy	1.3.6.1.4.1.2544.1.12.4.1.53.1.14	Unsigned32	read-only	This object specify PPS port clock accuracy.
U32 f3PulsePerSecondPortClockClass	1.3.6.1.4.1.2544.1.12.4.1.53.1.13	Unsigned32	read-only	This object specify PPS port clock class.
I32 f3PulsePerSecondPortDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.53.1.12	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds in 8 nanoseconds steps. For input port, that is with input Signal Direction, the valid values are -5000000 to 5000000. Whereas for output port, the valid values are 0 to 90. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
SIG f3PulsePerSecondPortDirection	1.3.6.1.4.1.2544.1.12.4.1.53.1.10	SignalDirectionType	read-write	This object allows specification of the signal type (i.e. input or output).
PHY f3PulsePerSecondPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
f3PulsePerSecondPortEntry	1.3.6.1.4.1.2544.1.12.4.1.53.1		not-accessible	A conceptual row in the f3PulsePerSecondPortTable.
f3PulsePerSecondPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.16			A collection of objects used to manage the F3 Pulse Per Second Group.
NUM f3PulsePerSecondPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
PPS f3PulsePerSecondPortImpedance	1.3.6.1.4.1.2544.1.12.4.1.53.1.20	PpsPortImpedanceMode	read-write	This object allows specification of the impedance mode for an input PPS port. It is only an indication and cannot be set for an output PPS Port.
I32 f3PulsePerSecondPortIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
PPS f3PulsePerSecondPortInputRate	1.3.6.1.4.1.2544.1.12.4.1.53.1.11	PPSInputRate	read-write	This object allows specification of the PPS Input Rate.
OPE f3PulsePerSecondPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.53.1.5	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
U32 f3PulsePerSecondPortOutputDelay	1.3.6.1.4.1.2544.1.12.4.1.53.1.17	Unsigned32	read-write	This object allows specification of the PPS Output Delay in nanoseconds. The valid values are 0 to 999999999 in 10 nanoseconds steps. Values which are not multiple of 10 will be automatically rounded up to the next multiple of 10.
NUM f3PulsePerSecondPortPhyInterfaceType	1.3.6.1.4.1.2544.1.12.4.1.53.1.16	PPSPhyInterfaceType	read-write	This object specify PPS physical interface type.
PPS f3PulsePerSecondPortPolarity	1.3.6.1.4.1.2544.1.12.4.1.53.1.19	PpsPolarity	read-write	This object allows specification of the Polarity of the PPS signal on the PPS Port.
SEC f3PulsePerSecondPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.53.1.6	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
SQU f3PulsePerSecondPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.53.1.7	SquelchControl	read-write	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSM f3PulsePerSecondPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.53.1.8	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the Pulse Per Second port. This value is used when f3PulsePerSecondPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
f3PulsePerSecondPortTable	1.3.6.1.4.1.2544.1.12.4.1.53		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
TIM f3PulsePerSecondPortTimeSource	1.3.6.1.4.1.2544.1.12.4.1.53.1.15	TimeSource	read-only	This object specify PPS port time source.
NUM f3PulsePerSecondPortTODSource	1.3.6.1.4.1.2544.1.12.4.1.53.1.9	VariablePointer	read-write	This object allows to set the Pulse Per Second Source for the Port.
U32 f3PulsePerSecondPortWidth	1.3.6.1.4.1.2544.1.12.4.1.53.1.18	Unsigned32	read-write	This object allows specification of the Width of the PPS signal on the PPS Port. The valid values are 0 to 250000 in 1 microsecond unit.
U32 f3SatelliteAzimuth	1.3.6.1.4.1.2544.1.12.4.1.93.1.7	Unsigned32	read-only	This object indicates the Satellite Entry Azimuth Angle in degrees.
U32 f3SatelliteCNO	1.3.6.1.4.1.2544.1.12.4.1.93.1.5	Unsigned32	read-only	This object indicates the Satellite Entry Signal Level (Carrier-to-Noise power ratio) in dB-Hz units.
U32 f3SatelliteElevation	1.3.6.1.4.1.2544.1.12.4.1.93.1.8	Unsigned32	read-only	This object indicates the Satellite Entry Elevation Angle in degrees.
f3SatelliteEntry	1.3.6.1.4.1.2544.1.12.4.1.93.1		not-accessible	A conceptual row in the f3SatelliteTable Entries can be created/deleted in this table by management application action.
NUM f3SatelliteGnssReceiverPort	1.3.6.1.4.1.2544.1.12.4.1.93.1.9	VariablePointer	read-only	This object provides the GNSS Receiver Port OID related to this Satellite Entry.
f3SatelliteGroup	1.3.6.1.4.1.2544.1.12.4.2.2.42			A collection of objects used to manage the GNSS satellite group function.
SAT f3SatelliteHealth	1.3.6.1.4.1.2544.1.12.4.1.93.1.6	SatelliteHealth	read-only	This object indicates the Satellite Entry Health.
U32 f3SatelliteIndex	1.3.6.1.4.1.2544.1.12.4.1.93.1.1	Unsigned32	not-accessible	An integer index value used to uniquely identify this Satellite Entry in the f3SatelliteTable.
T/F f3SatelliteInUse	1.3.6.1.4.1.2544.1.12.4.1.93.1.2	TruthValue	read-only	This object indicates whether the Satellite Entry been used by GNSS receiver. It is supported only on OSA542x devices.
U32 f3SatelliteSV	1.3.6.1.4.1.2544.1.12.4.1.93.1.3	Unsigned32	read-only	This object indicates the Satellite Entry SV PRN number.
CON f3SatelliteSVType	1.3.6.1.4.1.2544.1.12.4.1.93.1.4	ConstellationTypesBitMap	read-only	This object indicates the Satellite Entry Constellation Type.
f3SatelliteTable	1.3.6.1.4.1.2544.1.12.4.1.93		not-accessible	A list of GNSS Satellite entries on the NIDs.
ADM f3TimeOfDayPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.55.1.4	AdminState	read-write	This object represents the Administrative State of the Time Of Day Port.
STR f3TimeOfDayPortAlias	1.3.6.1.4.1.2544.1.12.4.1.55.1.14	DisplayString	read-create	This object allows SNMP management entities to provide an alias to the Time Of Day port.
U32 f3TimeOfDayPortAssumedClockClass	1.3.6.1.4.1.2544.1.12.4.1.55.1.15	Unsigned32	read-write	This object allows specification of the Assumed Clock Class for an input TOD port. It is only an indication and cannot be set for an output TOD Port.
I32 f3TimeOfDayPortDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.55.1.13	Integer32	read-write	This object allows specification of the TOD external Delay Compensation in nanoseconds. For input port, that is with input Signal Direction, the valid values are -5000000 to 5000000 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
PHY f3TimeOfDayPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
f3TimeOfDayPortEntry	1.3.6.1.4.1.2544.1.12.4.1.55.1		not-accessible	A conceptual row in the f3TimeOfDayPortTable.
f3TimeOfDayPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.17			A collection of objects used to manage the F3 Time of Day Port Group.
NUM f3TimeOfDayPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port.
I32 f3TimeOfDayPortIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Time Of Day Port within the card.
PPS f3TimeOfDayPortInputRate	1.3.6.1.4.1.2544.1.12.4.1.55.1.12	PPSInputRate	read-write	This object allows specification of the Time Of Day Input Rate.
OPE f3TimeOfDayPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.55.1.5	OperationalState	read-only	This object represents the Operational State of the Time Of Day Port.
TOD f3TimeOfDayPortOutputFormat	1.3.6.1.4.1.2544.1.12.4.1.55.1.10	TODOutputFormat	read-write	This object allows to set the Output Format for the Time Of Day port. The Output Format is used to determine the type of output format of the TOD port.
SEC f3TimeOfDayPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.55.1.6	SecondaryState	read-only	This object represents the Secondary State of the Time Of Day Port.
SIG f3TimeOfDayPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.55.1.11	SignalDirectionType	read-write	This object allows specification of the signal direction type (i.e. input or output).
SQU f3TimeOfDayPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.55.1.7	SquelchControl	read-write	This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSM f3TimeOfDayPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.55.1.8	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the Time Of Day port. This value is used when f3TimeOfDayPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
f3TimeOfDayPortTable	1.3.6.1.4.1.2544.1.12.4.1.55		not-accessible	A list of entries corresponding to Time Of Day Port Facilities.
NUM f3TimeOfDayPortTODSource	1.3.6.1.4.1.2544.1.12.4.1.55.1.9	VariablePointer	read-write	This object allows to set the Time Of Day Source for the Port.
USB f3Usb3GDCNMuxOperationalMode	1.3.6.1.4.1.2544.1.12.4.1.46.1.38	UsbOperationalMode	read-write	This object describe the USB operatioan mode.
F3U f3Usb3GDCNPINCodeAction	1.3.6.1.4.1.2544.1.12.4.1.46.1.32	F3Usb3GDCNPINCodeActionType	read-create	This Action is for PIN code operation.
ADM f3Usb3GDCNPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.46.1.4	AdminState	read-write	This object represents the Administrative State of the G3 DCN Port.
STR f3Usb3GDCNPortAPN	1.3.6.1.4.1.2544.1.12.4.1.46.1.23	DisplayString	read-write	This object allows configure the Access Point Name of the G3 DCN Port.
STR f3Usb3GDCNPortConfirmPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.30	DisplayString	read-create	This object is the Confirm Pin Code.
F3U f3Usb3GDCNPortConnectionStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.16	F3Usb3GNetworkConnectionState	read-only	This object provides the Wirless Connection Status of the G3 DCN Port.
STR f3Usb3GDCNPortCurrentPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.28	DisplayString	read-create	This object is the Current Pin Code.
STR f3Usb3GDCNPortCurrentPukCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.31	DisplayString	read-create	This object is the Current Puk Code.
STR f3Usb3GDCNPortDailNumber	1.3.6.1.4.1.2544.1.12.4.1.46.1.26	DisplayString	read-write	This object allows configure the Dail Number of the G3 DCN Port.
IP f3Usb3GDCNPortDNS1	1.3.6.1.4.1.2544.1.12.4.1.46.1.21	IpAddress	read-only	This first DNS of the interface.
IP f3Usb3GDCNPortDNS2	1.3.6.1.4.1.2544.1.12.4.1.46.1.22	IpAddress	read-only	This second DNS of the interface.
PHY f3Usb3GDCNPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
f3Usb3GDCNPortEntry	1.3.6.1.4.1.2544.1.12.4.1.46.1		not-accessible	A conceptual row in the f3Usb3GDCNPortTable.
STR f3Usb3GDCNPortFirmwareVersion	1.3.6.1.4.1.2544.1.12.4.1.46.1.12	DisplayString	read-only	This object provides the Firmware Version of the G3 DCN Port..
STR f3Usb3GDCNPortFSN	1.3.6.1.4.1.2544.1.12.4.1.46.1.9	DisplayString	read-only	This object provides the Factory Serial Number of the G3 DCN Port.
STR f3Usb3GDCNPortHardwareVersion	1.3.6.1.4.1.2544.1.12.4.1.46.1.11	DisplayString	read-only	This object provides the Hardware Version of the G3 DCN Port.
NUM f3Usb3GDCNPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for G3 DCN Port. An integer index value used to uniquely identify this G3 DCN Port.
STR f3Usb3GDCNPortIMEI	1.3.6.1.4.1.2544.1.12.4.1.46.1.10	DisplayString	read-only	This object provides the International Mobile Equipment Identity of the G3 DCN Port.
STR f3Usb3GDCNPortIMSI	1.3.6.1.4.1.2544.1.12.4.1.46.1.35	DisplayString	read-only	This object provides the International Mobile Subscriber Identity of the G3 DCN Port.
I32 f3Usb3GDCNPortIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, f3Usb3GDCNPortIndex
IP f3Usb3GDCNPortIpAddress	1.3.6.1.4.1.2544.1.12.4.1.46.1.39	IpAddress	read-only	The IP address of this port.
STR f3Usb3GDCNPortModel	1.3.6.1.4.1.2544.1.12.4.1.46.1.8	DisplayString	read-only	This object provides the Model of the G3 DCN Port.
I32 f3Usb3GDCNPortMTU	1.3.6.1.4.1.2544.1.12.4.1.46.1.19	Integer32	read-only	This object provides the MTU of the G3 DCN Port.
IP f3Usb3GDCNPortNetMask	1.3.6.1.4.1.2544.1.12.4.1.46.1.40	IpAddress	read-only	The IP subnet mask of this port.
STR f3Usb3GDCNPortNewPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.29	DisplayString	read-create	This object is the New Pin code.
OPE f3Usb3GDCNPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.46.1.5	OperationalState	read-only	This object represents the Operational State of the G3 DCN Port.
STR f3Usb3GDCNPortPassword	1.3.6.1.4.1.2544.1.12.4.1.46.1.25	DisplayString	read-write	This object allows configure the Password of the G3 DCN Port.
I32 f3Usb3GDCNPortPINLeftChances	1.3.6.1.4.1.2544.1.12.4.1.46.1.14	Integer32	read-only	This object provides the Left Chances for PIN input of the G3 DCN Port.
G3A f3Usb3GDCNPortPINStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.36	G3AuthStatus	read-only	This status of PIN/PUK
STR f3Usb3GDCNPortProviderName	1.3.6.1.4.1.2544.1.12.4.1.46.1.20	DisplayString	read-only	This object provides the Wireless Service Provider Name of the G3 DCN Port.
I32 f3Usb3GDCNPortPUKLeftChances	1.3.6.1.4.1.2544.1.12.4.1.46.1.15	Integer32	read-only	This object provides the Left Chances for PUK input of the G3 DCN Port.
I32 f3Usb3GDCNPortRedialTimer	1.3.6.1.4.1.2544.1.12.4.1.46.1.27	Integer32	read-write	This object allows configure the Retail Timer of the G3 DCN Port.
ROW f3Usb3GDCNPortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.34	RowStatus	read-write	The status of this row. The f3Usb3GDCNPortRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
F3U f3Usb3GDCNPortRSSI	1.3.6.1.4.1.2544.1.12.4.1.46.1.17	F3Usb3GRecvSignalStrengthInd	read-only	This object provides the Received Signal Strength Indication of the G3 DCN Port.
SEC f3Usb3GDCNPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.46.1.6	SecondaryState	read-only	This object represents the Secondary State of the G3 DCN Port.
F3U f3Usb3GDCNPortSIMStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.13	F3Usb3GSimCardState	read-only	This object provides the SIM card Status of the G3 DCN Port.
I32 f3Usb3GDCNPortSpeed	1.3.6.1.4.1.2544.1.12.4.1.46.1.18	Integer32	read-only	This object provides the Connection Speed of the G3 DCN Port.
STO f3Usb3GDCNPortStorageType	1.3.6.1.4.1.2544.1.12.4.1.46.1.33	StorageType	read-create	The type of storage configured for this entry.
f3Usb3GDCNPortTable	1.3.6.1.4.1.2544.1.12.4.1.46		not-accessible	3G DCN Port table. The table contains parameters of 3G USB modem.
STR f3Usb3GDCNPortUserName	1.3.6.1.4.1.2544.1.12.4.1.46.1.24	DisplayString	read-write	This object allows configure the User Name of the G3 DCN Port.
STR f3Usb3GDCNPortVendorName	1.3.6.1.4.1.2544.1.12.4.1.46.1.7	DisplayString	read-only	This object provides the Vendor Name of the G3 DCN Port.
USB f3UsbDCNPortMobileNetworkType	1.3.6.1.4.1.2544.1.12.4.1.46.1.37	UsbDCNMobileNetworkType	read-only	This object describe the mobile network type.
STR f3UsbWIFIDonglePortAccessdUsers	1.3.6.1.4.1.2544.1.12.4.1.77.1.17	DisplayString	read-only	The users list of accessed via WIFI dongle port.
ADM f3UsbWIFIDonglePortAdminState	1.3.6.1.4.1.2544.1.12.4.1.77.1.4	AdminState	read-write	This object represents the Administrative State of this Port.
WIF f3UsbWIFIDonglePortEncryption	1.3.6.1.4.1.2544.1.12.4.1.77.1.9	WIFIEncryptionType	read-write	The encryption type of this port.
PHY f3UsbWIFIDonglePortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
f3UsbWIFIDonglePortEntry	1.3.6.1.4.1.2544.1.12.4.1.77.1		not-accessible	A conceptual row in the f3UsbWIFIDonglePortTable.
NUM f3UsbWIFIDonglePortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for WIFI dongle Port. An integer index value used to uniquely identify this Port
I32 f3UsbWIFIDonglePortIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.1	Integer32	not-accessible	An integer index value used to uniquely identify WIFI dongle port.
IP f3UsbWIFIDonglePortIPAddress	1.3.6.1.4.1.2544.1.12.4.1.77.1.10	IpAddress	read-write	The IP address of this port.
STR f3UsbWIFIDonglePortName	1.3.6.1.4.1.2544.1.12.4.1.77.1.18	DisplayString	read-only	The WIFI dongle port name.
OPE f3UsbWIFIDonglePortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.77.1.5	OperationalState	read-only	This object represents the Operational State of this Port.
STR f3UsbWIFIDonglePortPassword	1.3.6.1.4.1.2544.1.12.4.1.77.1.8	DisplayString	read-write	This object represents the password value of this SSID.
ROW f3UsbWIFIDonglePortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.77.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3UsbWIFIDonglePortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UsbWIFIDonglePortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3UsbWIFIDonglePortRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
SEC f3UsbWIFIDonglePortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.77.1.6	SecondaryState	read-only	This object represents the Secondary State of this Port.
STR f3UsbWIFIDonglePortSSID	1.3.6.1.4.1.2544.1.12.4.1.77.1.7	DisplayString	read-write	This object represents the SSID value of this port.
STO f3UsbWIFIDonglePortStorageType	1.3.6.1.4.1.2544.1.12.4.1.77.1.15	StorageType	read-create	The type of storage configured for this entry.
f3UsbWIFIDonglePortTable	1.3.6.1.4.1.2544.1.12.4.1.77		not-accessible	A list of entries corresponding to wifi dongle Port for configuration purposes.
IP f3UsbWIFIDonglePortWIFIAllocatedIPEnd	1.3.6.1.4.1.2544.1.12.4.1.77.1.14	IpAddress	read-write	The last IP address could be allocated.
IP f3UsbWIFIDonglePortWIFIAllocatedIPFrom	1.3.6.1.4.1.2544.1.12.4.1.77.1.13	IpAddress	read-write	The start IP address could be allocated.
DHC f3UsbWIFIDonglePortWIFIDHCPRole	1.3.6.1.4.1.2544.1.12.4.1.77.1.12	DHCPType	read-only	The DHCP role type of this port.
IP f3UsbWIFIDonglePortwWIFIIPNetMask	1.3.6.1.4.1.2544.1.12.4.1.77.1.11	IpAddress	read-write	The IP address mask of this port.
f3XdslAndPpppoeParamGroup	1.3.6.1.4.1.2544.1.12.4.2.2.49			A collection of objects used to manage the F3 Ethernet Traffic Port XDSL Parameter.
ADM gps10MHzPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.18.1.4	AdminState	read-write	This object represents the Administrative State of the Port.
STR gps10MHzPortAlias	1.3.6.1.4.1.2544.1.12.4.1.18.1.15	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
SSM gps10MHzPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.18.1.14	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the GPS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
U32 gps10MHzPortClockAccuracy	1.3.6.1.4.1.2544.1.12.4.1.18.1.12	Unsigned32	read-only	This object specify GPS port clock accuracy.
U32 gps10MHzPortClockClass	1.3.6.1.4.1.2544.1.12.4.1.18.1.11	Unsigned32	read-only	This object specify GPS port clock class.
PHY gps10MHzPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
gps10MHzPortEntry	1.3.6.1.4.1.2544.1.12.4.1.18.1		not-accessible	A conceptual row in the GPS 10MHz Port Table.
NUM gps10MHzPortFrequencySource	1.3.6.1.4.1.2544.1.12.4.1.18.1.10	VariablePointer	read-write	This object allows to set the Frequency Source for the Port.
NUM gps10MHzPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for the IEEE Ethernet Port.
I32 gps10MHzPortIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.1	Integer32	read-only	An integer index value used to uniquely identify the IEEE Ethernet Port.
CLK gps10MHzPortInputSignalType	1.3.6.1.4.1.2544.1.12.4.1.18.1.16	ClkSignalType	read-write	This object allows specification of the input signal type (i.e. 10mhz or 2048khz).
OPE gps10MHzPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.18.1.5	OperationalState	read-only	This object represents the Operational State of the Port.
SEC gps10MHzPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.18.1.6	SecondaryState	read-only	This object represents the Secondary State of the Port.
SIG gps10MHzPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.18.1.7	SignalDirectionType	read-write	This object allows specification of the signal type (i.e. input or output).
SQU gps10MHzPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.18.1.8	SquelchControl	read-write	This object allows to set the Squelch Control for the 10MHz port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port. Only option supported is squelch-ql.
SSM gps10MHzPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.18.1.9	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
gps10MHzPortTable	1.3.6.1.4.1.2544.1.12.4.1.18		not-accessible	A list of entries corresponding to GPS 10MHz Facilities for configuration purposes.
TIM gps10MHzPortTimeSource	1.3.6.1.4.1.2544.1.12.4.1.18.1.13	TimeSource	read-only	This object specify GPS port time source.
ADM ieee1588EthernetPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.17.1.4	AdminState	read-write	This object represents the Administrative State of the Port.
ETH ieee1588EthernetPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.17.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Port.
PHY ieee1588EthernetPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ieee1588EthernetPortEntry	1.3.6.1.4.1.2544.1.12.4.1.17.1		not-accessible	A conceptual row in the IEEE Ethernet Port Table.
NUM ieee1588EthernetPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for the IEEE Ethernet Port.
I32 ieee1588EthernetPortIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.1	Integer32	read-only	An integer index value used to uniquely identify the IEEE Ethernet Port.
CME ieee1588EthernetPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.17.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Port.
ETH ieee1588EthernetPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.17.1.8	EthernetMediaType	read-write	This object represents the type of Media.
I32 ieee1588EthernetPortMTU	1.3.6.1.4.1.2544.1.12.4.1.17.1.7	Integer32	read-write	This object provides the MTU on the Port.
ETH ieee1588EthernetPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.17.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Port.
OPE ieee1588EthernetPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.17.1.5	OperationalState	read-only	This object represents the Operational State of the Port.
SEC ieee1588EthernetPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.17.1.6	SecondaryState	read-only	This object represents the Secondary State of the Port.
ieee1588EthernetPortTable	1.3.6.1.4.1.2544.1.12.4.1.17		not-accessible	A list of entries corresponding to IEEE Ethernet Port Facilities for configuration purposes.
I32 neTMParamsAgingtime	1.3.6.1.4.1.2544.1.12.4.1.66.1.2	Integer32	read-create	The object describe the system aging time.
BAN neTMParamsBandwidthProfileMode	1.3.6.1.4.1.2544.1.12.4.1.66.1.1	BandwidthProfileMode	read-create	A Network Element level Bandwidth Profile Mode shall be supported which will indicate if the CIR/EIR is interpreted as Information Rate (IR) or Line Rate (LR). In IR mode BWP is enforced based on number of bytes beginning with DA and ending with FCS as it was received at a port which is called the Service Frame in MEF terminology. In LR mode the BWP is enforced based on the whole frame including IFG, Preamble and SFD.
neTMParamsGroup	1.3.6.1.4.1.2544.1.12.4.2.2.26			A collection of objects used to manage the ne facility entry Group.
networkElementTMParamsEntry	1.3.6.1.4.1.2544.1.12.4.1.66.1		not-accessible	A conceptual row in the networkElementTMParamsTable.
networkElementTMParamsTable	1.3.6.1.4.1.2544.1.12.4.1.66		not-accessible	Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
ADM ocnStmAdminState	1.3.6.1.4.1.2544.1.12.4.1.47.1.4	AdminState	read-write	This object represents the Administrative State of the OCn/STM interface.
SSM ocnStmAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.30	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the OCn/STM interface. This object is only applicable for Synchronous OCn/STM interface. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port TransmitQL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
BIT ocnStmBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.47.1.23	BitErrRate	read-write	This object provides the threshold of B2DEG.
BIT ocnStmBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.47.1.22	BitErrRate	read-write	This object provide the threshold of B2EXC.
PHY ocnStmEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this OCn/STM interface.
ocnStmEntry	1.3.6.1.4.1.2544.1.12.4.1.47.1		not-accessible	A conceptual row in the ocnStmTable.
EOT ocnStmEoTDMMode	1.3.6.1.4.1.2544.1.12.4.1.47.1.17	EoTDMMode	read-write	This object provides the TDM Mode base on OCn/STM interface. EoPDH means VCG container is PDH; EoTDM means VCG container is VC of SDH/SONET
SSM ocnStmExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.29	SSMQualityLevel	read-write	This object allows to specify the expected QL when the OCn/STM interface is enabled for QL Mode. This object is only applicable for Synchronous OCn/STM interface, when ocnStmQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
STR ocnStmExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.26	DisplayString	read-write	This object provides the expected J0 on the OCn/STM interface.
TDM ocnStmFreqSourceType	1.3.6.1.4.1.2544.1.12.4.1.47.1.34	TDMFrequencySourceType	read-write	This object represents the TDM Frequency source of OCN/STM port.
ocnStmGroup	1.3.6.1.4.1.2544.1.12.4.2.2.11			A collection of objects used to manage the OCN/STM Line.
TDM ocnStmHighOrderPathType	1.3.6.1.4.1.2544.1.12.4.1.47.1.35	TDMPathType	read-write	This object provides the High Order Path Type of the OCn/STM interface.
NUM ocnStmIfIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn/STM interface. An integer index value used to uniquely identify this OCn/STM interface.
I32 ocnStmIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.1	Integer32	not-accessible	Unique index value associated with the OCn/STM interface.
T/F ocnStmInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.47.1.21	TruthValue	read-write	This object allows to insert AIS-L out from OCn/STM interface when it is in maintenance state.
CML ocnStmLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.47.1.18	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn/STM interface.
CML ocnStmLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.47.1.19	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn/STM interface.
I32 ocnStmLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.47.1.20	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn/STM interface.
MUL ocnStmMultiplexingStructures	1.3.6.1.4.1.2544.1.12.4.1.47.1.16	MultiplexingStructure	read-write	This object provides the TDM Multiplexing Structure base on OCn/STM interface.
OPE ocnStmOperationalState	1.3.6.1.4.1.2544.1.12.4.1.47.1.5	OperationalState	read-only	This object represents the Operational State of the OCn/STM interface.
OCN ocnStmPortType	1.3.6.1.4.1.2544.1.12.4.1.47.1.33	OCNSTMPortType	read-only	This object represents the OCN/STM Port Type. Determines whether the OCN/STM port operates in OC or STM mode.
T/F ocnStmQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.47.1.28	TruthValue	read-write	This object allows to specify whether the OCn/STM interface can be enabled/disabled for QL Mode. This object is only applicable for Synchronous OCn/STM interface, when ocnStmQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM ocnStmReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.31	SSMQualityLevel	read-only	This object provides the Received QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous OCn/STM interface.
STR ocnStmRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.24	DisplayString	read-only	This object provides the recevied J0 on the OCn/STM interface.
SEC ocnStmSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.47.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn/STM interface.
SFP ocnStmSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.47.1.11	SfpConnectorValue	read-only	This object provides the SFP connector value.
DAT ocnStmSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.47.1.10	DateAndTime	read-only	This object provides the date of manufacture of the SFP.
STR ocnStmSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.47.1.37	DisplayString	read-only	This object provides the hardware revision of the SFP.
I32 ocnStmSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.47.1.13	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters.
U32 ocnStmSfpLaserWaveLengthPicometer	1.3.6.1.4.1.2544.1.12.4.1.47.1.14	Unsigned32	read-only	This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then ocnStmSfpLaserWaveLength=1510 and ocnStmSfpLaserWaveLengthPicometer=10.
I32 ocnStmSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.47.1.12	Integer32	read-only	This object provides the SFP Link Length.
SFP ocnStmSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.47.1.15	SfpMediaType	read-only	This object provides the SFP Media Type.
STR ocnStmSfpName	1.3.6.1.4.1.2544.1.12.4.1.47.1.36	DisplayString	read-only	This object provides the official name of the SFP.
STR ocnStmSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.47.1.8	DisplayString	read-only	This object provides the part number of the SFP.
STR ocnStmSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.47.1.9	DisplayString	read-only	This object provides the serial number of the SFP.
STR ocnStmSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.47.1.7	DisplayString	read-only	This object provides the vendor name of the SFP.
ocnStmTable	1.3.6.1.4.1.2544.1.12.4.1.47		not-accessible	A list of entries corresponding to OCn/STM interface.
TRA ocnStmTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.47.1.27	TrailTraceFormat	read-write	This object provides the J0 length mode on the OCn/STM interface.
SSM ocnStmTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.32	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous OCn/STM interface.
STR ocnStmTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.25	DisplayString	read-write	This object provides the transmit J0 on the OCn/STM interface.
pcpEncodeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.8			A collection of objects used to manage the F3 Priority Mapping function.
pethMainPseEXTEntry	1.3.6.1.4.1.2544.1.12.4.1.59.1		not-accessible	A conceptual row in the pethMainPseEXTEntry.
I32 pethMainPseExtGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.59.1.1	Integer32	not-accessible	This object has the same value with the group index in pethMainPseEXTTable.
PSE pethMainPseExtNonStandardPD	1.3.6.1.4.1.2544.1.12.4.1.59.1.2	PSENonStandardPD	read-write	disabled: don't support non-standard PD, enabled: support non-standard PD
pethMainPseEXTTable	1.3.6.1.4.1.2544.1.12.4.1.59		not-accessible	A list of entries corresponding to PethMainPseEXTEntry.
PSE pethPsePortExtAvailablePowerLevel	1.3.6.1.4.1.2544.1.12.4.1.58.1.5	PsePowerLevel	read-write	This object means the pse port available power level.
U32 pethPsePortExtPowerConsumption	1.3.6.1.4.1.2544.1.12.4.1.58.1.4	Unsigned32	read-only	This object means the power consumption of each port in mWatts.
ADM pps16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.79.1.3	AdminState	read-only	This object represents the Administrative State of the Pulse Per Second Port.
STR pps16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.79.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
I32 pps16PortGroupDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.79.1.10	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
SIG pps16PortGroupDirection	1.3.6.1.4.1.2544.1.12.4.1.79.1.9	SignalDirectionType	read-only	This object allows specification of the signal type (i.e. input or output).
pps16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.79.1		not-accessible	A conceptual row in the pps16PortGroupTable.
pps16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.35			A collection of objects used to manage the Pps 16 port card Group function.
NUM pps16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.79.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
I32 pps16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.79.1.1	Integer32	read-only	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
OPE pps16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.79.1.4	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
ROW pps16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.79.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pps16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pps16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pps16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC pps16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.79.1.5	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
SQU pps16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.79.1.7	SquelchControl	read-only	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
pps16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.79		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
NUM pps16PortGroupTODSource	1.3.6.1.4.1.2544.1.12.4.1.79.1.8	VariablePointer	read-only	This object allows to set the Pulse Per Second Source for the Port.
prioMapGroup	1.3.6.1.4.1.2544.1.12.4.2.2.7			A collection of objects used to manage the F3 Priority Mapping function.
ADM sciPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.105.1.2	AdminState	read-write	This object represents the Administrative State of the SCI Port.
sciPortEntry	1.3.6.1.4.1.2544.1.12.4.1.105.1		not-accessible	A conceptual row in the sciPortTable.
sciPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.50			A collection of objects used to manage the SCI port.
I32 sciPortIndex	1.3.6.1.4.1.2544.1.12.4.1.105.1.1	Integer32	read-only	An integer index value used to uniquely identify this SCI Port.
OPE sciPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.105.1.3	OperationalState	read-only	This object represents the Operational State of the SCI Port.
SCI sciPortRxSsmQL	1.3.6.1.4.1.2544.1.12.4.1.105.1.6	SciRxSsmQL	read-write	This object allows to manage the RX QL of the SCI port.
SCI sciPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.105.1.5	SciSignalDirection	read-write	This object allows to manage the signal direction of the SCI port.
SCI sciPortSignalMode	1.3.6.1.4.1.2544.1.12.4.1.105.1.4	SciSignalMode	read-write	This object allows to manage the signal mode of the SCI port.
sciPortTable	1.3.6.1.4.1.2544.1.12.4.1.105		not-accessible	A list of entries corresponding to SCI Port Facilities for configuration purposes.
ADM stsVcPathAdminState	1.3.6.1.4.1.2544.1.12.4.1.48.1.4	AdminState	read-write	This object represents the Administrative State of the OCn Path.
BIT stsVcPathBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.48.1.12	BitErrRate	read-write	This object provides the threshold of B3DEG.
BIT stsVcPathBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.48.1.11	BitErrRate	read-write	This object provide the threshold of B3EXC.
stsVcPathEntry	1.3.6.1.4.1.2544.1.12.4.1.48.1		not-accessible	A conceptual row in the stsVcPathTable.
U32 stsVcPathExpectedSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.19	Unsigned32	read-write	This object provides the expected C2 on the OCn Path.
STR stsVcPathExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.16	DisplayString	read-write	This object provides the expected J1 on the OCn Path.
stsVcPathGroup	1.3.6.1.4.1.2544.1.12.4.2.2.12			A collection of objects used to manage the STS/VC Higher Order Path.
NUM stsVcPathIfIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn Path. An integer index value used to uniquely identify this OCn Path interface.
U32 stsVcPathIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.2	Unsigned32	not-accessible	This object is his index.
T/F stsVcPathInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.48.1.10	TruthValue	read-write	This object allows to insert AIS-P out from OCn Path when it is in maintenance state.
CML stsVcPathLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.48.1.7	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn Path.
CML stsVcPathLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.48.1.8	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn Path.
I32 stsVcPathLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.48.1.9	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn Path.
TDM stsVcPathLowOrderPathType	1.3.6.1.4.1.2544.1.12.4.1.48.1.21	TDMPathType	read-write	This object provides the low Order Path Type of the sts vc interface.
OPE stsVcPathOperationalState	1.3.6.1.4.1.2544.1.12.4.1.48.1.5	OperationalState	read-only	This object represents the Operational State of the OCn Path.
NUM stsVcPathParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex. Based on the Multiplexing hierarchy, this object points to the container's interface index.
ROW stsVcPathRowStatus	1.3.6.1.4.1.2544.1.12.4.1.48.1.20	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stsVcPathRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stsVcPathRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stsVcPathRowStatus object may be modified if the associated instance of this object is equal to active(1).
U32 stsVcPathRxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.17	Unsigned32	read-only	This object provides the recevied C2 on the OCn Path.
STR stsVcPathRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.14	DisplayString	read-only	This object provides the recevied J1 on the OCn Path.
SEC stsVcPathSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.48.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn Path.
stsVcPathTable	1.3.6.1.4.1.2544.1.12.4.1.48		not-accessible	A list of entries corresponding to OCn Path.
TRA stsVcPathTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.48.1.13	TrailTraceFormat	read-write	This object provides the J1 length mode on the OCn Path.
U32 stsVcPathTxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.18	Unsigned32	read-write	This object provides the transmit C2 on the OCn Path.
STR stsVcPathTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.15	DisplayString	read-write	This object provides the transmit J1 on the OCn Path.
ADM todPps16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.81.1.3	AdminState	read-only	This object represents the Administrative State of the Time Of Day Port.
STR todPps16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.81.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
I32 todPps16PortGroupDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.81.1.11	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
todPps16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.81.1		not-accessible	A conceptual row in the todPps16PortGroupTable.
todPps16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.37			A collection of objects used to manage the TOD and PPS 16 port card Group function.
NUM todPps16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.81.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port.
I32 todPps16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.81.1.1	Integer32	read-only	An integer index value used to uniquely identify this Time Of Day Port within the card.
OPE todPps16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.81.1.4	OperationalState	read-only	This object represents the Operational State of the Time Of Day Port.
TOD todPps16PortGroupOutputFormat	1.3.6.1.4.1.2544.1.12.4.1.81.1.10	TODOutputFormat	read-only	This object allows to set the Output Format for the Time Of Day port. The Output Format is used to determine the type of output format of the TOD port.
ROW todPps16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.81.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with todPps16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
SEC todPps16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.81.1.5	SecondaryState	read-only	This object represents the Secondary State of the Time Of Day Port.
SQU todPps16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.81.1.7	SquelchControl	read-only	This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSM todPps16PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.81.1.8	SSMQualityLevel	read-only	This object allows to set the Squelch QL for the Time Of Day port. This value is used when todPps16PortGroupSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
todPps16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.81		not-accessible	A list of entries corresponding to Time Of Day Port Facilities.
NUM todPps16PortGroupTODSource	1.3.6.1.4.1.2544.1.12.4.1.81.1.9	VariablePointer	read-only	This object allows to set the Time Of Day Source for the Port.
trafficGroup	1.3.6.1.4.1.2544.1.12.4.2.2.6			A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers.
trafficGroupCmHub	1.3.6.1.4.1.2544.1.12.4.2.2.10			A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers.
ADM vtVcPathAdminState	1.3.6.1.4.1.2544.1.12.4.1.49.1.4	AdminState	read-write	This object represents the Administrative State of the OCn VT1.5/VC12.
BIT vtVcPathBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.49.1.12	BitErrRate	read-write	This object provides the threshold of BERDEG.
BIT vtVcPathBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.49.1.11	BitErrRate	read-write	This object provide the threshold of BEREXC.
vtVcPathEntry	1.3.6.1.4.1.2544.1.12.4.1.49.1		not-accessible	A conceptual row in the vtVcPathTable.
U32 vtVcPathExpectedSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.19	Unsigned32	read-write	This object provides the expected V5 byte(b5-b7) on the OCn VT1.5/VC12.
STR vtVcPathExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.16	DisplayString	read-write	This object provides the expected J2 on the OCn VT1.5/VC12.
vtVcPathGroup	1.3.6.1.4.1.2544.1.12.4.2.2.13			A collection of objects used to manage the VT/VC Lower Order Path.
NUM vtVcPathIfIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn VT1.5/VC12. An integer index value used to uniquely identify this OCn VT1.5/VC12 interface.
U32 vtVcPathIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.2	Unsigned32	not-accessible	This object represents the unique number of the Path within the parent container represented by vtvcPathParentIfIndex.
T/F vtVcPathInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.49.1.10	TruthValue	read-write	This object allows to insert AIS-P out from OCn VT1.5/VC12 when it is in maintenance state.
CML vtVcPathLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.49.1.7	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn VT1.5/VC12.
CML vtVcPathLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.49.1.8	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn VT1.5/VC12.
I32 vtVcPathLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.49.1.9	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn VT1.5/VC12.
OPE vtVcPathOperationalState	1.3.6.1.4.1.2544.1.12.4.1.49.1.5	OperationalState	read-only	This object represents the Operational State of the OCn VT1.5/VC12.
NUM vtVcPathParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex.
ROW vtVcPathRowStatus	1.3.6.1.4.1.2544.1.12.4.1.49.1.20	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of vtVcPathRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with vtVcPathRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The vtVcPathRowStatus object may be modified if the associated instance of this object is equal to active(1).
U32 vtVcPathRxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.17	Unsigned32	read-only	This object provides the recevied V5 byte(b5-b7) on the OCn VT1.5/VC12.
STR vtVcPathRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.14	DisplayString	read-only	This object provides the recevied J2 on the OCn VT1.5/VC12.
SEC vtVcPathSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.49.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn VT1.5/VC12.
vtVcPathTable	1.3.6.1.4.1.2544.1.12.4.1.49		not-accessible	A list of entries corresponding to VT1.5/VC12. These represent the lower order path (LOP) entities.
TRA vtVcPathTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.49.1.13	TrailTraceFormat	read-only	This object provides the J2 length mode on the OCn VT1.5/VC12.
U32 vtVcPathTxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.18	Unsigned32	read-write	This object provides the transmit V5 byte(b5-b7) on the OCn VT1.5/VC12.
STR vtVcPathTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.15	DisplayString	read-write	This object provides the transmit J2 on the OCn VT1.5/VC12.

OID symbolic	OID numeric	Type	Access	Description
cmFacilityMIB	1.3.6.1.4.1.2544.1.12.4			This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
cmFacilityObjects	1.3.6.1.4.1.2544.1.12.4.1
cmEthernetAccPortTable	1.3.6.1.4.1.2544.1.12.4.1.1		not-accessible	A list of entries corresponding to Ethernet Access Port Facilities for configuration purposes.
cmEthernetAccPortEntry	1.3.6.1.4.1.2544.1.12.4.1.1.1		not-accessible	A conceptual row in the cmEthernetAccPortTable.
I32 cmEthernetAccPortIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex. From release 5.6CC zero value becomes valid. The zero value is used in Network Element level objects which contain cmEthernetAccPortIndex in the index which is not-applicable for these objects e.g. Pass-thru Flows, Shapers or Policers.
NUM cmEthernetAccPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Access Port. An integer index value used to uniquely identify this Ethernet Access Port.
PHY cmEthernetAccPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM cmEthernetAccPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.1.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Access Port.
OPE cmEthernetAccPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.1.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Access Port.
SEC cmEthernetAccPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.1.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Access Port.
I32 cmEthernetAccPortMTU	1.3.6.1.4.1.2544.1.12.4.1.1.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Access Port. The object is made read-write for FSP150CC devices.
ETH cmEthernetAccPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.1.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Access Port.
ETH cmEthernetAccPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.1.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Access Port.
ETH cmEthernetAccPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.1.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Access Port.
CME cmEthernetAccPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.1.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Access Port.
T/F cmEthernetAccPortJumboFramesEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.12	TruthValue	read-write	This object allows enabling/disabling jumbo frames support on the Ethernet Access Port. This object is only applicable for Ethernet Access Port on R3.1CM NTU Card.
STR cmEthernetAccPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.1.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetAccPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.1.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetAccPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.1.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
DAT cmEthernetAccPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.1.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
SFP cmEthernetAccPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.1.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
CME cmEthernetAccPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.1.1.18	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.19	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.20	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.21	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.22	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.23	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Access Port.
CMD cmEthernetAccPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.24	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Access Port.
CMD cmEthernetAccPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.25	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Access Port.
STR cmEthernetAccPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.1.1.26	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Access Port.
CMD cmEthernetAccPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.27	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Access Port.
DAT cmEthernetAccPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.1.1.28	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
CML cmEthernetAccPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.1.1.29	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Access Port.
CML cmEthernetAccPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.30	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Access Port.
I32 cmEthernetAccPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.1.1.31	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Access Port.
CMS cmEthernetAccPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.1.1.32	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
INT cmEthernetAccPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.1.1.33	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
STR cmEthernetAccPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.1.1.34	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.1.1.35	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.1.1.36	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
INT cmEthernetAccPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.1.1.37	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
STR cmEthernetAccPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.1.1.38	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.1.1.39	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.1.1.40	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
T/F cmEthernetAccPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.41	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Access Port.
CML cmEthernetAccPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.1.1.42	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType.
CML cmEthernetAccPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.1.1.43	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled.
I32 cmEthernetAccPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.1.1.44	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
T/F cmEthernetAccPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.1.1.45	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
T/F cmEthernetAccPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.46	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
I32 cmEthernetAccPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.1.1.47	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet access port.
CMR cmEthernetAccPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.1.1.48	CmRemoteLinkIds	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet access port. By setting the appropriate bit positions, the Ethernet access port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end.
I32 cmEthernetAccPortOamId	1.3.6.1.4.1.2544.1.12.4.1.1.1.49	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
CMC cmEthernetAccPortOamAdminDisposition	1.3.6.1.4.1.2544.1.12.4.1.1.1.50	CmControlProtocolDispType	read-write	Ethernet Access Port's EFM OAM Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
CMO cmEthernetAccPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.1.1.51	CmOamDiscoveryState	read-only	Ethernet Access Port's OAM discovery state.
T/F cmEthernetAccPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.52	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port supports sending variable response OAMPDUs.
T/F cmEthernetAccPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.53	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port supports interpreting Link Events.
T/F cmEthernetAccPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.1.1.54	TruthValue	read-write	This object allows specification of whether the Ethernet Access Port is capable of OAM remote loopback mode.
T/F cmEthernetAccPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.55	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port is capable of sending OAMPDUs when the receive path is non-operational.
I32 cmEthernetAccPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.1.1.56	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Access Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
CMO cmEthernetAccPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.57	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
MAC cmEthernetAccPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.58	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
T/F cmEthernetAccPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.59	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
T/F cmEthernetAccPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.60	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
T/F cmEthernetAccPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.1.1.61	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetAccPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.62	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
I32 cmEthernetAccPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.1.1.63	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
CMO cmEthernetAccPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.64	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
CME cmEthernetAccPortMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.65	CmEthernetSvcPortMode	read-write	This object allows specification of whether the Ethernet Access Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offering MAC based services) mode.
CME cmEthernetAccPortSvcType	1.3.6.1.4.1.2544.1.12.4.1.1.1.66	CmEthernetSvcType	read-write	This object allows specification of whether the Ethernet Access Port provides transparent port based services, or multi-flow VLAN based services.
CMC cmEthernetAccPortRxPauseDisposition	1.3.6.1.4.1.2544.1.12.4.1.1.1.67	CmControlProtocolDispType	read-write	This object allows management of RX pause frames on Ethernet Access port. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
T/F cmEthernetAccPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.68	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet Access port.
CMA cmEthernetAccPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.1.1.69	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet Access port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames.
CME cmEthernetAccPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.70	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Access port.
I32 cmEthernetAccPortSfpReach	1.3.6.1.4.1.2544.1.12.4.1.1.1.71	Integer32	read-only	This object provides the SFP Reach in meters. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
I32 cmEthernetAccPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.1.1.72	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetAccPortMediaType is fiber.
SFP cmEthernetAccPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.1.1.73	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
T/F cmEthernetAccPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.74	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Access Port.
CMO cmEthernetAccPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.1.1.75	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
T/F cmEthernetAccPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.76	TruthValue	read-write	This object allows to manage the Access Port Shaping. When enabled, values in cmEthernetAccPortShapedSpeedLo and cmEthernetAccPortShapedSpeedHi are applicable.
U32 cmEthernetAccPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.1.1.77	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled.
U32 cmEthernetAccPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.1.1.78	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled.
U32 cmEthernetAccPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.1.1.79	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Access Port. Setting this value to 0 will disable the Q-in-Q override on the Access Port.
T/F cmEthernetAccPortRxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.80	TruthValue	read-write	This object allows to enable/disable the RX PAUSE on the Access Port. This object is not applicable for FSP150CM NTU Card. On NTU Card cmEthernetAccPortRxPauseDisposition object should be used to provision RxPause disposition.
T/F cmEthernetAccPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.81	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
CML cmEthernetAccPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.1.1.82	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Access Port's behavior when link loss forwarding trigger events occur on the Network Port. This provides ability to configure per access port LLF behavior.
CMR cmEthernetAccPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.1.1.83	CmRemoteLinkIds	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Access Port.
T/F cmEthernetAccPortN2AVlanTrunkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.84	TruthValue	read-write	This object allows to enable or disable the VLAN trunking on Ethernet Access port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of the access port. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetAccPortA2NPushPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.85	TruthValue	read-write	This object allows to specify whether cmEthernetAccPortPortVlanId value will be PUSHed on untagged frames or not in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetAccPortN2APopPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.86	TruthValue	read-write	This object allows to specify whether cmEthernetAccPortPortVlanId value will be POPed in the Network to Access direction. This object is only applicable for connection-oriented, evpl service type.
VLA cmEthernetAccPortPortVlanId	1.3.6.1.4.1.2544.1.12.4.1.1.1.87	VlanId	read-write	This object allows to specify the Ethernet Access Port VLAN Id to PUSH on untagged frames in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled is set to true.
VLA cmEthernetAccPortPortVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.1.1.88	VlanPriority	read-write	This object allows to specify the Ethernet Access Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetAccPortPortVlanId) on untagged frames in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled is set to true.
PRI cmEthernetAccPortPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.89	PriorityMapMode	read-write	This object allows to specify the Ethernet Access Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetAccPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.90	TruthValue	read-write	This object allows to specify whether the Ethernet Access Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
T/F cmEthernetAccPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.91	TruthValue	read-write	This object allows to specify whether the Ethernet Access Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetAccPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM cmEthernetAccPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.92	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Access Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetAccPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
SSM cmEthernetAccPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.93	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Access Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM cmEthernetAccPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.94	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
SSM cmEthernetAccPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.95	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
T/F cmEthernetAccPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.1.1.96	TruthValue	read-write	This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bit set. In the receive direction, it uses the S-TAG DEI when enabled, else ignores it. The following comment is NOT relevant to OSA8.1.1, since this object is still supported by OSA8.1.1. The object has been deprecated. The respective configuration should be managed by following objects: cmEthernetAccPortRxDeiAction, cmEthernetAccPortTxDeiAction, cmEthernetAccPortRxDeiOuterTagType, cmEthernetAccPortTxDeiOuterTagType.
PCP cmEthernetAccPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.1.1.97	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag.
PCP cmEthernetAccPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.98	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetAccPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmAccPortPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
MAC cmEthernetAccPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.99	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
XGE cmEthernetAccPortXgePhyType	1.3.6.1.4.1.2544.1.12.4.1.1.1.100	XgePhyType	read-write	This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps. This attribute is only applicable for ports configured to work at speed-10G-full. For other speeds the value of this object must be 'not-applicable' and cannot be changed.
T/F cmEthernetAccPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.101	TruthValue	read-write	This object allows to Enable/Disable the Acc Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetAccPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.102	TruthValue	read-write	This object allows to Enable/Disable the Acc Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
MAC cmEthernetAccPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.103	MacAddress	read-write	This object allows to set Acc Port Source MAC Address for frame matching when Acc Port Source MAC Control is enabled.
MAC cmEthernetAccPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.104	MacAddress	read-write	This object allows to set Acc Port Destination MAC Address for frame matching when Acc Port Destination MAC Control is enabled.
T/F cmEthernetAccPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.105	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
RXD cmEthernetAccPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.106	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
TXD cmEthernetAccPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.107	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
DEI cmEthernetAccPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.1.1.108	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
DEI cmEthernetAccPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.1.1.109	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
OID cmEthernetAccPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.1.1.110	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
T/F cmEthernetAccPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.1.1.111	TruthValue	read-only	Channel number of WDM tunable XFP setting.
U32 cmEthernetAccPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.1.1.112	Unsigned32	read-only	Channel number of WDM tunable XFP setting.
ETH cmEthernetAccPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.1.1.113	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Access Port.
T/F cmEthernetAccPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.114	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Access Port.
T/F cmEthernetAccPortA2nSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.115	TruthValue	read-write	This object allows to Enable/Disable the Swapping of Priority Vlan Id in the A2N direction.
T/F cmEthernetAccPortN2aSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.116	TruthValue	read-write	This object allows to Enable/Disable the Swapping of Priority Vlan Id in the N2A direction.
VLA cmEthernetAccPortSwapPriorityVID	1.3.6.1.4.1.2544.1.12.4.1.1.1.117	VlanId	read-write	This object allows to specify the value of Vlan Id for the Swapping of Priority Vlan Id operation for both the A2N and N2A direction.
MAC cmEthernetAccPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.118	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
VLA cmEthernetAccPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.1.1.119	VlanTagType	read-write	Indicates which VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is only applicable on products when Flowpoint Model is supported. inner-vlantag: The inner VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no inner VLAN tag (untagged or single-tagged) will have a COS equal to the default COS of the port. outer-vlantag: The outer VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no outer VLAN tag (untagged) will have a COS equal to the default COS of the port. This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
I32 cmEthernetAccPortDefaultCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.120	Integer32	read-write	The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is supported. This value is assigned to a frame received on a port when: - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame is untagged - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame has a single VLAN tag - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag; and the frame is untagged - the cmEthernetAccPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype - the cmEthernetAccPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype. This attribute has been deprecated and is not supported. The Default COS is determined from the flowpoint's associated Priority Mapping Profle.
ETH cmEthernetAccPortTrafficModel	1.3.6.1.4.1.2544.1.12.4.1.1.1.121	EthernetPortTrafficModel	read-write	The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model.
T/F cmEthernetAccPortIndependentShaperBW	1.3.6.1.4.1.2544.1.12.4.1.1.1.122	TruthValue	read-write	This object describes whether the shaper bw independent.
IP cmEthernetAccPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.1.1.123	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
I32 cmEthernetAccPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.124	Integer32	read-write	This object used to specify the wfq segmentation cos value.
I32 cmEthernetAccPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.125	Integer32	read-write	This object used to specify the wfq group cos value.
U32 cmEthernetAccPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.1.1.126	Unsigned32	read-write	This object used to specify the wfq group eir low 32 bits value.
U32 cmEthernetAccPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.1.1.127	Unsigned32	read-write	This object used to specify the wfq group eir high 32 bits value.
T/F cmEthernetAccPortSilentStartControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.128	TruthValue	read-write	Allows enabling/disabling of silent start.
I32 cmEthernetAccPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.1.1.129	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
T/F cmEthernetAccPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.1.1.130	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Access Port.
U32 cmEthernetAccPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.1.1.131	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Access Port.
STR cmEthernetAccPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.1.1.132	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetAccPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.1.1.133	DisplayString	read-only	This object provides the hardware revision of the SFP.
T/F cmEthernetAccPortPersistentLoopbackControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.134	TruthValue	read-write	This object allows enabling/disabling of Persistent Loopback Control. The loopback configuration parameters do not survive restart as typically maintenance actions are not persist. Setting this attribute to true shall persist the loopback configuration parameters. When it is set to false the loopback configuration parameters shall not survive a restart.
T/F cmEthernetAccPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.135	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
IP cmEthernetAccPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.1.1.136	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
T/F cmEthernetAccPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.137	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
ADR cmEthernetAccPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.1.1.138	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
TOG cmEthernetAccPortPowerdDeviceDetection	1.3.6.1.4.1.2544.1.12.4.1.1.1.139	ToggleValue	read-write	This object allows to manage (enable/disable) Power Over Ethernet Detection.
POE cmEthernetAccPortPoEStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.140	PoEStatus	read-only	This object provides the status of Power Over Ethernet Detection.
OID cmEthernetAccPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.1.1.141	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
cmEthernetAccPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.2		not-accessible	A list of entries corresponding to Ethernet Access Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
cmEthernetAccPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.2.1		not-accessible	A conceptual row in the cmEthernetAccPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port.
I32 cmEthernetAccPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.2.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
CMC cmEthernetAccPortCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.2.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
STR cmEthernetAccPortCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.2.1.3	DisplayString	read-only	This provides description of CPD Filter.
CMC cmEthernetAccPortCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.2.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
MAC cmEthernetAccPortCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.2.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
MAC cmEthernetAccPortCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
I32 cmEthernetAccPortCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.2.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmEthernetAccPortCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
I32 cmEthernetAccPortCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.2.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmEthernetAccPortCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
cmEthernetAccPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.3		not-accessible	A list of entries corresponding to Ethernet Access Port Cable Length Benchmark.
cmEthernetAccPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.3.1		not-accessible	A conceptual row in the cmEthernetAccPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Access Port.
I32 cmEthernetAccPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.3.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
T/F cmEthernetAccPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.3.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
STR cmEthernetAccPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.3.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
STR cmEthernetAccPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.3.1.4	DisplayString	read-write	A textual string containing description of cable span.
cmFlowTable	1.3.6.1.4.1.2544.1.12.4.1.4		not-accessible	A list of entries corresponding to Ethernet Flows for configuration purposes. If the corresponding Ethernet Access Port's cmEthernetAccPortMode is connection-oriented and cmEthernetAccPortSvcType is epl, there exists a single Flow in this table. No Flow creation or deletion is allowed on this table for FSP150CM NTU based services. Since Fsp150 R5.6CC release this table is used to manage 2 types of Flows: - Access Port Flow as in the previous releases - Tranparent Flow (new in 5.6CC) A Transparent Flow is Flow between Network-1 and Network-2 ports used to convey pass-thru traffic in the ring topology e.g. ERP. Few of the existing attributes will have new semantix for Transperent Flow. Transparent Flow is a NE level object and hence has different indexing than the Access Port Flow. The valid indices are neIndex and cmFlowIndex. The remaining indices will have constant values as follows: shelfIndex = 1 slotIndex = 255 cmEthernetAccPortIndex = 0
cmFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.4.1		not-accessible	A conceptual row in the cmFlowTable. These entries represent an Ethernet Flow.
I32 cmFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.4.1.1	Integer32	read-create	The integer index value corresponding to an Ethernet Flow.
STR cmFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.4.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the Flow.
ADM cmFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.4.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
OPE cmFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.4.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
SEC cmFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.4.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
CMF cmFlowType	1.3.6.1.4.1.2544.1.12.4.1.4.1.6	CmFlowType	read-create	This object represents the type of the Flow.
T/F cmFlowMultiCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.7	TruthValue	read-create	This object allows specification of multiple COS (Class of Service) Flow.
U32 cmFlowA2NCIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.8	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the lower 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 CIR.
U32 cmFlowA2NEIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the lower 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 EIR.
T/F cmFlowN2ARateLimitingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.10	TruthValue	read-create	This object allows management of the N2A rate limiting, independent of A2N rate limiting. When not enabled, N2A specification is the same as A2N. This object is not applicable for Tranparent Flow; the value should be FALSE.
U32 cmFlowN2ACIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.11	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 CIR.
U32 cmFlowN2AEIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.12	Unsigned32	read-create	This object represents the Excess Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 EIR.
STO cmFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.4.1.13	StorageType	read-create	The type of storage configured for this entry.
ROW cmFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.4.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
FLO cmFlowTrafficType	1.3.6.1.4.1.2544.1.12.4.1.4.1.15	FlowTrafficType	read-only	This object provides information on the type of traffic flow supported by the system, i.e.'shaped-only' flows (support only shaping) or 'policed-shaped' (support policing and shaping) flows. 'shaped-only' flow exists for FSP150CM NTU and CPMR access ports. 'policed-shaped' flows are supported in FSP150CC devices. Please note that this object refers to how traffic profiles are managed on devices and is independent of the policing enabling/disabling feature.
I32 cmFlowCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.16	Integer32	read-create	This object allows specification of the COS (Class of Service) value for the Traffic Flow. This value is used at flow creation time to identify the COS level of the A2N and N2A shaper. In case of a multi-COS flow, this value is not applicable when multiple policers/shapers exist on the flow. This object is also applicable to specify the COS of a connection-oriented epl service.
STR cmFlowVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.4.1.17	DisplayString	read-create	This object is applicable only when Port is in connection-oriented evpl mode. This attribute is mandatory if creation of connection-oriented evpl regular flow is desired. It allows specification of VLAN members of the Flow. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flow is created, this attribute can only be updated using cmFlowAction and cmFlowActionVlan objects.
FLO cmFlowAction	1.3.6.1.4.1.2544.1.12.4.1.4.1.18	FlowVlanActionType	read-write	This object is applicable only when Port is in connection-oriented evpl mode and the cmFlowType is regular. This object allows to add or remove the VLAN members specified by cmFlowActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowActionVlan and then should specify cmFlowAction on whether to add/remove the specified VLAN member.
STR cmFlowActionVlan	1.3.6.1.4.1.2544.1.12.4.1.4.1.19	DisplayString	read-create	This object is applicable only when Port is in connection-oriented evpl mode. This object allows adding/removing VLAN members to a connection-oriented evpl regular flow. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmFlowAction.
T/F cmFlowUntaggedMemberEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.20	TruthValue	read-create	This object is applicable only when Port is in connection-oriented evpl mode for a regular flow as well as default flow. This object allows to specify whether or not the flow supports untagged traffic.
U32 cmFlowA2NCIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.21	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. This value represents the upper 32 bits of CIR (lower is provided in cmFlowA2NCIR). For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 CIR.
U32 cmFlowA2NEIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.22	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 EIR.
U32 cmFlowN2ACIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.23	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. This value represents the upper 32 bits of CIR (lower is provided in cmFlowN2ACIR). For a Multi COS flow, this value is settable only at creation time. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 CIR.
U32 cmFlowN2AEIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.24	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Network to Access (N2A) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 EIR.
T/F cmFlowHCOSMgmtEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.25	TruthValue	read-create	This object allows management of Hierarchical COS on the Flow.
U32 cmFlowGuaranteedA2NBandwidthLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.26	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of guaranteed bandwidth (lower 32 bits) of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 guaranteed bandwidth.
U32 cmFlowGuaranteedA2NBandwidthHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.27	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of guaranteed bandwidth (upper 32 bits) of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 guaranteed bandwidth.
U32 cmFlowMaximumA2NBandwidthLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.28	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of maximum bandwidth (lower 32 bits) of a flow. This is the peak limit of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 maximum bandwidth.
U32 cmFlowMaximumA2NBandwidthHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.29	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of maximum bandwidth (upper 32 bits) of a flow. This is the peak limit of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 maximum bandwidth.
FLO cmFlowCTagControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.30	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowCTagVlanId) and priority (cmFlowCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowCTagVlanId; if the type is 'none', no C-TAG management is performed. This object is not applicable for Tranparent Flow; the value should be 'none'.
VLA cmFlowCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.4.1.31	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push', 'swapvid' and 'pushvid' control types. This object is not applicable for Tranparent Flow; the value should be 0.
VLA cmFlowCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.4.1.32	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
T/F cmFlowCTagMatchRxPrio	1.3.6.1.4.1.2544.1.12.4.1.4.1.33	TruthValue	read-create	This object is used to specify whether the C-TAG priority be used or ignored for traffic in the N2A direction. This is only applicable if cmFlowCTagControl is 'push'. This object is not applicable for Tranparent Flow; the value should be FALSE.
FLO cmFlowSTagControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.34	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'swapvid', and 'none'. If the type is 'push', the VLAN Id (cmFlowSTagVlanId) and priority (cmFlowSTagVlanPriority) are pushed onto the frame; if the type is 'swapvid', the VLAN Id(12 bits) is swapped with the specified cmFlowSTagVlanId; type is 'none', no S-TAG manament is performed. This object is not applicable for Tranparent Flow; the value should be 'none'.
VLA cmFlowSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.4.1.35	VlanId	read-create	This object allows specification of the VLAN Id to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
VLA cmFlowSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.4.1.36	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
T/F cmFlowOuterTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.37	TruthValue	read-create	This object is used to specify whether the flow participates in outer-tag priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N outer-tag priority to be specified based on incoming priority at Access Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should be FALSE.
VLA cmFlowN2ACOSPriorityTagType	1.3.6.1.4.1.2544.1.12.4.1.4.1.38	VlanTagType	read-create	This object is used to specify whether the flow uses the inner-tag or the outer-tag in determining the COS (Class of Service) in the N2A direction. This object is applicable in the case of a Multi COS Flow. This object is not supported for Tranparent Flow;
I32 cmFlowESFramesLossThreshold	1.3.6.1.4.1.2544.1.12.4.1.4.1.39	Integer32	read-write	This object is used to specify the number of frames lost per flow that starts counting Errored Seconds (ES) on the flow. This functionality is applicable if the flow is monitored using the Y.1731 ESA functionality.
I32 cmFlowSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.4.1.40	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flow. This functionality is applicable if the flow is monitored using the Y.1731 ESA functionality.
T/F cmFlowPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.41	TruthValue	read-create	This object is applicable only when Port is in connection-oriented mode. This object is applicable to both epl and evpl mode flows. This object allows to enable/disable the policing function on the flow.
T/F cmFlowPreserveSTagProperties	1.3.6.1.4.1.2544.1.12.4.1.4.1.42	TruthValue	read-create	This object is applicable only when Port is in connection-oriented mode. This object is applicable to evpl mode Regular flows, when S-TAG control is specified as SWAPVID. When enabled, this attribute preserves the EtherType (0x88a8) and DEI (Drop Eligibility Indicator) bit in the incoming S-TAG (both from Access and Network Port perspective) into the outgoing S-TAG. When not enabled, the incoming tag is considered as a Q-TAG (0x8100) and both EtherType and CFI (Canonical Form Indicator) bits are over-written by the S-TAG Ethertype (0x88a8) and DEI bit. This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowInnerTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.43	TruthValue	read-create	This object is used to specify whether the flow participates in inner-tag (second) priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N inner-tag priority to be specified based on incoming priority at Access Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should FALSE.
T/F cmFlowN2AOuterTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.44	TruthValue	read-create	This object is used to specify whether the flow participates in outer-tag priority swap in the A2N direction. The Priority Mapping Table cmNetPortPrioMapTable allows the N2A outer-tag priority to be specified based on incoming priority at Network Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should be FALSE.
SHA cmFlowA2NShapingType	1.3.6.1.4.1.2544.1.12.4.1.4.1.45	ShapingType	read-create	This object is used to specify whether the traffic in A2N direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbased flows the value of this attribute is flow-based and cannot be changed. In case of regular and default flows Fsp150 products may support both port-based and flow-based shaping.
SHA cmFlowN2AShapingType	1.3.6.1.4.1.2544.1.12.4.1.4.1.46	ShapingType	read-create	This object is used to specify whether the traffic in N2A direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbased flows the value of this attribute is flow-based and cannot be changed. In case of regular and default flows Fsp150 products may support both port-based and flow-based shaping.
T/F cmFlowSTagMatchRxPrio	1.3.6.1.4.1.2544.1.12.4.1.4.1.47	TruthValue	read-create	This object indicates whether the S-TAG priority is used or ignored for traffic in the N2A direction. This is only applicable if cmFlowSTagControl is 'push'. This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowAutoBandwidthConfigEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.48	TruthValue	read-create	This object is applicable for Flows on the PWE3 Ethernet Backplane Port. When set to TRUE bandwidth of this Flow will be automatically adjusted when PWE3 SATOPs are provisioned. The bandwidth will be adjusted based on the TDM entities of associated SATOPs. Flow on ports other than PWE3 Ethernet Backplane Port will always have this value set to FALSE and it is not configurable.
NUM cmFlowPort1	1.3.6.1.4.1.2544.1.12.4.1.4.1.49	VariablePointer	read-create	This object specifies a physical or logical port on the Access side of the Flow. This can be Access Port, Access LAG or Access Split Horizion Group. In case of Tranparent Flow this object specifies port1 of the Flow which is Network-1.
NUM cmFlowPort2	1.3.6.1.4.1.2544.1.12.4.1.4.1.50	VariablePointer	read-create	This object specifies a physical or logical port on the Network side of the Flow. This can be Network Port, Network LAG, Network Split Horizion Group ERP or Protection Group. In case of Tranparent Flow this object specifies port2 of the Flow which is Network-2.
POL cmFlowPolicingControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.51	PolicingControl	read-create	This object specifies the direction(s) in which Poling is enabled on traffic within this Flow when cmFlowPolicingEnabled is TRUE.
I32 cmFlowAutoCIRPercentage	1.3.6.1.4.1.2544.1.12.4.1.4.1.52	Integer32	read-create	This object specifies the percentage of available CIR on the Network ports assigned to this Flow when cmFlowAutoBandwidthConfigEnabled is TRUE. The flow guaranteedBW is set to available BW multiplied by this value. This object is only applicable to Tranparent Flow. The value of this object should be 0 for Access Flow.
NUM cmFlowLoopAvoidanceObject	1.3.6.1.4.1.2544.1.12.4.1.4.1.53	VariablePointer	read-create	This object specifies the Loop Avoidance instance to which this Flow belongs. This object is appicable only for Transparent Flow and should point to the ERP instance for which this Flows carries pass-thru traffic. In case of Access Flow the value of this object should be zeroDotZero.
FLO cmFlowConfigType	1.3.6.1.4.1.2544.1.12.4.1.4.1.54	FlowConfigType	read-only	This object specifies if this Flow is an Access Flow or Pass-thru Flow.
T/F cmFlowN2NForwardingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.55	TruthValue	read-create	This object is used to specify whether n2n forwarding is enabled on particular Flow.
T/F cmFlowA2NMulticastRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.56	TruthValue	read-write	Whether multicast frames are limited per Flow.
U32 cmFlowA2NMulticastRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.57	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
U32 cmFlowA2NMulticastRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.58	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
T/F cmFlowA2NBroadcastRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.59	TruthValue	read-write	Whether broadcast frames are limited per Flow.
U32 cmFlowA2NBroadcastRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.60	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
U32 cmFlowA2NBroadcastRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.61	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
T/F cmFlowA2NCombinedRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.62	TruthValue	read-write	Whether both multicast and broadcast frames are limited per Flow.
U32 cmFlowA2NCombinedRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.63	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
U32 cmFlowA2NCombinedRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.64	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
NUM cmFlowRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.4.1.65	VariablePointer	read-write	This object used to specify the flow's profile.
NUM cmFlowRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.4.1.66	VariablePointer	read-write	This object specifies EoMpls Pw object OID.
NUM cmFlowRefN2APrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.4.1.67	VariablePointer	read-write	This object used to specify the flow's N2A direction profile.
T/F cmFlowSecureBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.68	TruthValue	read-write	This object can be used to enable/disable secure block.
STR cmFlowRefConnectGuardFlowList	1.3.6.1.4.1.2544.1.12.4.1.4.1.69	DisplayString	read-write	This object specifies the secure flow list, it should be f3ConnectGuardFlowIndex value list split with comma.
STR cmFlowSecureStateList	1.3.6.1.4.1.2544.1.12.4.1.4.1.70	DisplayString	read-only	This object specifies the secure state list, it should be secure state value list and split with comma. For detailed description how to identify values, please see FlowSecState in CM-COMMON-MIB.
T/F cmFlowIndependentA2NShaperBW	1.3.6.1.4.1.2544.1.12.4.1.4.1.71	TruthValue	read-write	This object used to specify the flow related A2N shaper BW whether independent.
I32 cmFlowWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.72	Integer32	read-write	This object used to specify the flow related wfq segmentation COS value.
I32 cmFlowWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.73	Integer32	read-write	This object used to specify the flow related wfq group COS value.
U32 cmFlowWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.74	Unsigned32	read-write	This object used to specify the flow related wfq group EIR low 32 bits value.
U32 cmFlowWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.75	Unsigned32	read-write	This object used to specify the flow related wfq group EIR high 32 bits value.
cmFlowCpdTable	1.3.6.1.4.1.2544.1.12.4.1.5		not-accessible	A list of entries corresponding to Flow Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
cmFlowCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.5.1		not-accessible	A conceptual row in the cmFlowCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
I32 cmFlowCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.5.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
CMC cmFlowCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.5.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
STR cmFlowCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.5.1.3	DisplayString	read-only	This provides description of CPD Filter.
CMC cmFlowCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.5.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
MAC cmFlowCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.5.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
MAC cmFlowCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
I32 cmFlowCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.5.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmFlowCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
I32 cmFlowCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.5.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmFlowCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
cmQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.6		not-accessible	A list of entries corresponding to Ethernet Quality of Service Shaper for configuration purposes.
cmQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.6.1		not-accessible	A conceptual row in the cmQosShaperTable. These entries represent a Quality of Service Shaper.
I32 cmQosShaperTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.6.1.1	Integer32	read-create	The unique index value corresponding to a Quality of Service Shaper's direction. Values 1 and 2 are applicable to the Access Flow Shaper: - value of 1 stands for A2N direction, - value of 2 stands for N2A direction. Values 3 and 4 are applicable to Pass-thru Flow Shaper (new in 5.6CC release): - value of 3 stands for N1toN2 direction - value of 4 stands for N2toN1 direction
I32 cmQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.6.1.2	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper. In release 5.6CC the range is extended to 1..16 to support duplicate A2N shapers on a Flow. The duplicate shapers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent shapers of COS 0..7 going to Network 1 port; indices 9..16 represent shapers for COS 0..7 going to Network 2 port. In case of single-cos Flow index 1 represents shaper going to Network 1 port; index 9 represents shaper going to Network 2 port.
TRA cmQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.6.1.3	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
ADM cmQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.6.1.4	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
OPE cmQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.6.1.5	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
SEC cmQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.6.1.6	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
U32 cmQosShaperCIR	1.3.6.1.4.1.2544.1.12.4.1.6.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 cmQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.6.1.8	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 cmQosShaperEIR	1.3.6.1.4.1.2544.1.12.4.1.6.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Lower 32 bits) of a Shaper.
U32 cmQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.6.1.10	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 cmQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.6.1.11	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
STO cmQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.6.1.12	StorageType	read-create	The type of storage configured for this entry.
ROW cmQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.6.1.13	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
I32 cmQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.6.1.14	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
U32 cmQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.15	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 cmQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.16	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.6.1.17	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits) of a Shaper.
U32 cmQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.18	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) on the Shaper.
U32 cmQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.6.1.19	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Lower 32 bits) of a Shaper.
U32 cmQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.20	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 cmQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.21	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 cmQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.22	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 cmQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.6.1.23	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 cmQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.24	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
U32 cmQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.25	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 cmQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.6.1.26	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
I32 cmQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.6.1.27	Integer32	read-write	This object specifies the average frame size before fragmentation.
I32 cmQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.6.1.28	Integer32	read-write	This object specifies the wfq weight value.
cmEthernetNetPortTable	1.3.6.1.4.1.2544.1.12.4.1.7		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes.
cmEthernetNetPortEntry	1.3.6.1.4.1.2544.1.12.4.1.7.1		not-accessible	A conceptual row in the cmEthernetNetPortTable.
I32 cmEthernetNetPortIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Network Port within a card. Note that each Ethernet Network Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex.
NUM cmEthernetNetPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Network Port. An integer index value used to uniquely identify this Ethernet Network Port.
PHY cmEthernetNetPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM cmEthernetNetPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.7.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Network Port.
OPE cmEthernetNetPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.7.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Network Port.
SEC cmEthernetNetPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.7.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Network Port.
I32 cmEthernetNetPortMTU	1.3.6.1.4.1.2544.1.12.4.1.7.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Network Port.
ETH cmEthernetNetPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.7.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Network Port.
ETH cmEthernetNetPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.7.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Network Port.
ETH cmEthernetNetPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.7.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Network Port.
CME cmEthernetNetPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.7.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Network Port.
T/F cmEthernetNetPortJumboFramesEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.12	TruthValue	read-write	This object allows enabling/disabling jumbo frames support on the Ethernet Network Port. This object is only applicable for Ethernet Network Port on R3.1CM NTU Card.
STR cmEthernetNetPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.7.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.7.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.7.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
DAT cmEthernetNetPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.7.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
SFP cmEthernetNetPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.7.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
CME cmEthernetNetPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.7.1.18	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.19	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.20	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.21	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.22	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.23	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Network Port.
CMD cmEthernetNetPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.24	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Network Port.
CMD cmEthernetNetPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.25	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Network Port.
STR cmEthernetNetPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.7.1.26	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Network Port.
CMD cmEthernetNetPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.27	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Access Port.
DAT cmEthernetNetPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.7.1.28	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
CML cmEthernetNetPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.7.1.29	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Network Port.
CML cmEthernetNetPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.30	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Network Port.
I32 cmEthernetNetPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.7.1.31	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Network Port.
CMS cmEthernetNetPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.7.1.32	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
INT cmEthernetNetPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.7.1.33	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
STR cmEthernetNetPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.7.1.34	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.7.1.35	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.7.1.36	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
INT cmEthernetNetPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.7.1.37	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
STR cmEthernetNetPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.7.1.38	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.7.1.39	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.7.1.40	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
T/F cmEthernetNetPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.41	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Network Port.
CML cmEthernetNetPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.7.1.42	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetNetPortLinkLossFwdEnabled is enabled. This object is only valid for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType.
CML cmEthernetNetPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.7.1.43	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled.
I32 cmEthernetNetPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.7.1.44	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
T/F cmEthernetNetPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.7.1.45	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
T/F cmEthernetNetPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.46	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
I32 cmEthernetNetPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.7.1.47	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet Network port.
CMR cmEthernetNetPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.7.1.48	CmRemoteLinkIds	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet Network port. By setting the appropriate bit positions, the Ethernet Network port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end.
I32 cmEthernetNetPortOamId	1.3.6.1.4.1.2544.1.12.4.1.7.1.49	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
CMC cmEthernetNetPortOamAdminDisposition	1.3.6.1.4.1.2544.1.12.4.1.7.1.50	CmControlProtocolDispType	read-write	Ethernet Network Port's EFM OAM Administrative Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
CMO cmEthernetNetPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.7.1.51	CmOamDiscoveryState	read-only	Ethernet Network Port's OAM discovery state.
T/F cmEthernetNetPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.52	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port supports sending variable response OAMPDUs.
T/F cmEthernetNetPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.53	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port supports interpreting Link Events.
T/F cmEthernetNetPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.7.1.54	TruthValue	read-write	This object allows specification of whether the Ethernet Network Port is capable of OAM remote loopback mode.
T/F cmEthernetNetPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.55	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port is capable of sending OAMPDUs when the receive path is non-operational.
I32 cmEthernetNetPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.7.1.56	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Network Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
CMO cmEthernetNetPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.57	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
MAC cmEthernetNetPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.58	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
T/F cmEthernetNetPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.59	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
T/F cmEthernetNetPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.60	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
T/F cmEthernetNetPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.7.1.61	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetNetPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.62	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
I32 cmEthernetNetPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.7.1.63	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
CMO cmEthernetNetPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.64	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
CMC cmEthernetNetPortRxPauseDisposition	1.3.6.1.4.1.2544.1.12.4.1.7.1.65	CmControlProtocolDispType	read-write	This object allows enabling/disabling receive pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products.
T/F cmEthernetNetPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.66	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products.
CMA cmEthernetNetPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.7.1.67	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet Network port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames. This object is not applicable for FSP150CC Release 4.1 products.
CME cmEthernetNetPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.68	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Network port.
I32 cmEthernetNetPortSfpReach	1.3.6.1.4.1.2544.1.12.4.1.7.1.69	Integer32	read-only	This object provides the SFP Reach in meters. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
I32 cmEthernetNetPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.7.1.70	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetNetPortMediaType is fiber.
SFP cmEthernetNetPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.7.1.71	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
T/F cmEthernetNetPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.72	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Network Port.
CMO cmEthernetNetPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.7.1.73	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
T/F cmEthernetNetPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.74	TruthValue	read-write	This object allows to manage the Network Port Shaping. When enabled, values in cmEthernetNetPortShapedSpeedLo and cmEthernetNetPortShapedSpeedHi are applicable.
U32 cmEthernetNetPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.7.1.75	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.
U32 cmEthernetNetPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.7.1.76	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.
U32 cmEthernetNetPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.7.1.77	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Network Port. Setting this value to 0 will disable the Q-in-Q override on the Network Port.
CML cmEthernetNetPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.7.1.78	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Network Port's behavior when link loss forwarding trigger events occur on the Access Port.
CMR cmEthernetNetPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.7.1.79	CmRemoteLinkIds	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Network Port.
T/F cmEthernetNetPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.80	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
T/F cmEthernetNetPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.81	TruthValue	read-write	This object allows to specify whether the Ethernet Network Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
T/F cmEthernetNetPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.82	TruthValue	read-write	This object allows to specify whether the Ethernet Network Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetNetPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM cmEthernetNetPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.83	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Network Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetNetPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
SSM cmEthernetNetPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.84	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Network Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM cmEthernetNetPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.85	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
SSM cmEthernetNetPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.86	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
PRI cmEthernetNetPortPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.87	PriorityMapMode	read-only	This object provides the Priority Mapping Mode used for classification of frames.
T/F cmEthernetNetPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.7.1.88	TruthValue	read-write	This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bit set. In the receive direction, it uses the S-TAG DEI when enabled, else ignores it. The following comment is NOT relevant to OSA8.1.1, since this object is still supported by OSA8.1.1. The object has been deprecated. The respective configuration should be managed by following objects: cmEthernetNetPortRxDeiAction, cmEthernetNetPortTxDeiAction, cmEthernetNetPortRxDeiOuterTagType, cmEthernetNetPortTxDeiOuterTagType.
PCP cmEthernetNetPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.89	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag.
PCP cmEthernetNetPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.90	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
MAC cmEthernetNetPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.91	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
XGE cmEthernetNetPortXgePhyType	1.3.6.1.4.1.2544.1.12.4.1.7.1.92	XgePhyType	read-write	This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps. This attribute is only applicable for ports configured to work at speed-10G-full. For other speeds the value of this object must be 'not-applicable' and cannot be changed.
T/F cmEthernetNetPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.93	TruthValue	read-write	This object allows to Enable/Disable the Net Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetNetPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.94	TruthValue	read-write	This object allows to Enable/Disable the Net Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
MAC cmEthernetNetPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.95	MacAddress	read-write	This object allows to set Net Port Source MAC Address for frame matching when Net Port Source MAC Control is enabled.
MAC cmEthernetNetPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.96	MacAddress	read-write	This object allows to set Net Port Destination MAC Address for frame matching when Net Port Destination MAC Control is enabled.
T/F cmEthernetNetPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.97	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
RXD cmEthernetNetPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.98	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
TXD cmEthernetNetPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.99	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
DEI cmEthernetNetPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.7.1.100	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
DEI cmEthernetNetPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.7.1.101	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
OID cmEthernetNetPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.7.1.102	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
T/F cmEthernetNetPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.7.1.103	TruthValue	read-only	Channel number of WDM tunable XFP setting.
U32 cmEthernetNetPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.7.1.104	Unsigned32	read-only	Channel number of WDM tunable XFP setting.
ETH cmEthernetNetPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.7.1.105	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Network Port.
T/F cmEthernetNetPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.106	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Network Port.
MAC cmEthernetNetPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.107	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
VLA cmEthernetNetPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.7.1.108	VlanTagType	read-write	Indicates the VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is only applicable on products when Flowpoint Model is supported. inner-vlantag: The inner VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no inner VLAN tag (untagged or single-tagged) will have a COS equal to the default COS of the port. outer-vlantag: The outer VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no outer VLAN tag (untagged) will have a COS equal to the default COS of the port. This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
I32 cmEthernetNetPortDefaultCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.109	Integer32	read-write	The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is supported. This value is assigned to a frame received on a port when: - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame is untagged - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame has a single VLAN tag - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag; and the frame is untagged - the cmEthernetNetPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype - the cmEthernetNetPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype. This attribute has been deprecated and is not supported. The Default COS is determined from the flowpoint's associated Priority Mapping Profle.
ETH cmEthernetNetPortTrafficModel	1.3.6.1.4.1.2544.1.12.4.1.7.1.110	EthernetPortTrafficModel	read-write	The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model.
T/F cmEthernetNetPortIndependentShaperBW	1.3.6.1.4.1.2544.1.12.4.1.7.1.111	TruthValue	read-write	This object describes the shaper BW whether independent.
PCP cmEthernetNetPortExpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.112	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in exp bits of the VLAN tag.
PCP cmEthernetNetPortExpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.113	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortExpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortExpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PCP cmEthernetNetPortIpPrecDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.114	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in Ip Prec bits of the VLAN tag.
PCP cmEthernetNetPortIpPrecDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.115	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Ip Prec Drop Eligibility Pairs. When the cmEthernetNetPortIpPrecDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortIpPrecDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PCP cmEthernetNetPortEncapPcpDEEncodingType	1.3.6.1.4.1.2544.1.12.4.1.7.1.116	PcpDEEncType	read-write	This is a port level control the mode of drop eligibility encoding in PCP bits of the VLAN tag in encapsulation header.
PCP cmEthernetNetPortEncapPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.117	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortEncapPcpDEEncodingType is of type 7p1d, 6p2d, 5p3d, the cmNetPortEncapPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
IP cmEthernetNetPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.7.1.118	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
I32 cmEthernetNetPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.119	Integer32	read-write	This object is used to specify the wfq segmentation COS value.
I32 cmEthernetNetPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.120	Integer32	read-write	This object is used to specify the wfq group COS value.
U32 cmEthernetNetPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.7.1.121	Unsigned32	read-write	This object is used to specify the wfq group eir low 32 bits value.
U32 cmEthernetNetPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.7.1.122	Unsigned32	read-write	This object is used to specify the wfq group eir high 32 bits value.
T/F cmEthernetNetPortSilentStartControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.123	TruthValue	read-write	Allows enabling/disabling of silent start.
I32 cmEthernetNetPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.7.1.124	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
T/F cmEthernetNetPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.7.1.125	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Network Port.
U32 cmEthernetNetPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.7.1.126	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Network Port.
STR cmEthernetNetPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.7.1.127	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetNetPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.7.1.128	DisplayString	read-only	This object provides the hardware revision of the SFP.
T/F cmEthernetNetPortPersistentLoopbackControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.129	TruthValue	read-write	This object allows enabling/disabling of Persistent Loopback Control. The loopback configuration parameters do not survive restart as typically maintenance actions are not persist. Setting this attribute to true shall persist the loopback configuration parameters. When it is set to false the loopback configuration parameters shall not survive a restart.
T/F cmEthernetNetPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.130	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
IP cmEthernetNetPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.7.1.131	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
T/F cmEthernetNetPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.132	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
ADR cmEthernetNetPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.7.1.133	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
OID cmEthernetNetPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.7.1.134	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
cmEthernetNetPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.8		not-accessible	A list of entries corresponding to Ethernet Network Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
cmEthernetNetPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.8.1		not-accessible	A conceptual row in the cmEthernetNetPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
I32 cmEthernetNetPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.8.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
CMC cmEthernetNetPortCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.8.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
STR cmEthernetNetPortCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.8.1.3	DisplayString	read-only	This provides description of CPD Filter.
CMC cmEthernetNetPortCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.8.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
MAC cmEthernetNetPortCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.8.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
MAC cmEthernetNetPortCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
I32 cmEthernetNetPortCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.8.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmEthernetNetPortCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
I32 cmEthernetNetPortCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.8.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmEthernetNetPortCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
cmEthernetMgmtPortTable	1.3.6.1.4.1.2544.1.12.4.1.9		not-accessible	A list of entries corresponding to Ethernet Management Port Facilities for configuration purposes.
cmEthernetMgmtPortEntry	1.3.6.1.4.1.2544.1.12.4.1.9.1		not-accessible	A conceptual row in the cmEthernetMgmtPortTable.
I32 cmEthernetMgmtPortIndex	1.3.6.1.4.1.2544.1.12.4.1.9.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Management Port within a card. Note that each Ethernet Management Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetMgmtPortIndex.
PHY cmEthernetMgmtPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.9.1.2	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM cmEthernetMgmtPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.9.1.3	AdminState	read-write	This object represents the Administrative State of the Ethernet Management Port.
OPE cmEthernetMgmtPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.9.1.4	OperationalState	read-only	This object represents the Operational State of the Ethernet Management Port.
SEC cmEthernetMgmtPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.9.1.5	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Management Port.
I32 cmEthernetMgmtPortMTU	1.3.6.1.4.1.2544.1.12.4.1.9.1.6	Integer32	read-only	This object provides the MTU on the Ethernet Management Port.
ETH cmEthernetMgmtPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.9.1.7	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Management Port.
ETH cmEthernetMgmtPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.9.1.8	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Management Port.
CME cmEthernetMgmtPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.9.1.9	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Management Port.
CME cmEthernetMgmtPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.9.1.10	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Management port.
ETH cmEthernetMgmtPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.9.1.11	EthernetMediaType	read-only	This object represents the type of Ethernet Media on the Ethernet Management Port.
cmPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.10		not-accessible	A list of entries corresponding to Ethernet Priority Mappings in multi Class of Service (COS) mode. This table is applicable only when the Access Port is in connection-oriented evpl mode.
cmPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.10.1		not-accessible	A conceptual row in the cmPrioMapTable.
I32 cmPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.10.1.1	Integer32	read-only	The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
PRI cmPrioMapXTagControl	1.3.6.1.4.1.2544.1.12.4.1.10.1.3	PrioMapControlType	read-write	This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapXTagPriority.
VLA cmPrioMapXTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.4	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapXTagControl as 'swap'.
I32 cmPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.10.1.5	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
VLA cmPrioMapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.6	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowOuterTagPrioEnabled'.
VLA cmPrioMapInnerTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.7	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority. Note that, each flow participates or not in inner-tag priority mapping, using the object 'cmFlowInnerTagPrioEnabled'.
cmQosFlowPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.11		not-accessible	A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes.
cmQosFlowPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.11.1		not-accessible	A conceptual row in the cmQosFlowPolicerTable. These entries represent a Quality of Service Policer.
I32 cmQosFlowPolicerTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.11.1.1	Integer32	read-create	The unique index value corresponding to a Quality of Service Policer's direction. Values 1 and 2 are applicable to the Access Flow Policer - value of 1 stands for A2N direction, - value of 2 stands for N2A direction. Values 3 and 4 are applicable to Pass-thru Flow Policer (new in 5.6CC release): - value of 3 stands for N1toN2 direction - value of 4 stands for N2toN1 direction
I32 cmQosFlowPolicerIndex	1.3.6.1.4.1.2544.1.12.4.1.11.1.2	Integer32	read-create	The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. In release 5.6CC the range is extended to 1..16 to support duplicate N2A policers on a Flow. The duplicate policers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 going from Network 1 port; indices 9..16 represent policers for COS 0..7 going from Network 2 port. In case of single-cos Flow index 1 represents policer going from Network 1 port; index 9 represents policer going from Network 2 port.
TRA cmQosFlowPolicerDirection	1.3.6.1.4.1.2544.1.12.4.1.11.1.3	TrafficDirection	read-create	This object is allows specification of Policer direction as 'a2n' or 'n2a'.
ADM cmQosFlowPolicerAdminState	1.3.6.1.4.1.2544.1.12.4.1.11.1.4	AdminState	read-write	This object represents the Administrative State of the QOS Flow Policer.
OPE cmQosFlowPolicerOperationalState	1.3.6.1.4.1.2544.1.12.4.1.11.1.5	OperationalState	read-only	This object represents the Operational State of the QOS Flow Policer.
SEC cmQosFlowPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.11.1.6	SecondaryState	read-only	This object represents the Secondary State of the QOS Flow Policer.
U32 cmQosFlowPolicerCIRLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.7	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR.
U32 cmQosFlowPolicerCIRHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.8	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR.
U32 cmQosFlowPolicerEIRLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.9	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR.
U32 cmQosFlowPolicerEIRHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.10	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR.
I32 cmQosFlowPolicerCBS	1.3.6.1.4.1.2544.1.12.4.1.11.1.11	Integer32	read-create	This object allows specification of the Commited Burst Size (CBS) on Policer.
I32 cmQosFlowPolicerEBS	1.3.6.1.4.1.2544.1.12.4.1.11.1.12	Integer32	read-create	This object allows specification of the Excess Burst Size (EBS) on the Policer.
POL cmQosFlowPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.4.1.11.1.13	PolicerAlgorithmType	read-only	This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
POL cmQosFlowPolicerColorMode	1.3.6.1.4.1.2544.1.12.4.1.11.1.14	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F cmQosFlowPolicerColorMarkingFlag	1.3.6.1.4.1.2544.1.12.4.1.11.1.15	TruthValue	read-create	This object allows specification of Policer Color Marking Flag. The policer will set/clear the DEI (Drop Eligibility Indication) bit of the frame on an S-TAG if this flag is enabled. This object is not supported - setting any value will not have effect on the System.
T/F cmQosFlowPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.11.1.16	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
NUM cmQosFlowPolicerAssociatedShaper	1.3.6.1.4.1.2544.1.12.4.1.11.1.17	VariablePointer	read-create	This object allows specification of the QOS Shaper associated with this Policer. Multiple Policers can map to single Shaper. The corresponding row with the specified QOS value must exist in cmQosShaperTable when this value is specified.
STO cmQosFlowPolicerStorageType	1.3.6.1.4.1.2544.1.12.4.1.11.1.18	StorageType	read-create	The type of storage configured for this entry.
ROW cmQosFlowPolicerRowStatus	1.3.6.1.4.1.2544.1.12.4.1.11.1.19	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosFlowPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosFlowPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosFlowPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
U32 cmQosFlowPolicerCIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.20	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits.
U32 cmQosFlowPolicerCIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.21	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.
U32 cmQosFlowPolicerEIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.22	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits.
U32 cmQosFlowPolicerEIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.23	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits.
NUM cmQosFlowPolicerEnvelopeObject	1.3.6.1.4.1.2544.1.12.4.1.11.1.24	VariablePointer	read-write	This object allows specification of envelope object.
I32 cmQosFlowPolicerRank	1.3.6.1.4.1.2544.1.12.4.1.11.1.25	Integer32	read-write	This object allows specification of rank value.
T/F cmQosFlowPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.11.1.26	TruthValue	read-write	This object describes whether the policing is enabled.
cmAccPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.12		not-accessible	A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port is in evpl mode and are relevant for traffic in the network to access direction.
cmAccPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.12.1		not-accessible	A conceptual row in the cmAccPortQosShaperTable. These entries represent a Quality of Service Shaper.
I32 cmAccPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.12.1.1	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper.
TRA cmAccPortQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.12.1.2	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
ADM cmAccPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.12.1.3	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
OPE cmAccPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.12.1.4	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
SEC cmAccPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.12.1.5	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
U32 cmAccPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.6	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 cmAccPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 cmAccPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.8	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.12.1.10	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 cmAccPortQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.12.1.11	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 cmAccPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.12.1.12	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
I32 cmAccPortQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.12.1.13	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
U32 cmAccPortQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.14	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.
U32 cmAccPortQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.15	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.
U32 cmAccPortQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.16	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.17	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.18	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 cmAccPortQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.19	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 cmAccPortQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.12.1.20	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 cmAccPortQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.21	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
U32 cmAccPortQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.22	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 cmAccPortQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.12.1.23	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
I32 cmAccPortQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.12.1.24	Integer32	read-write	This object specifies the average frame size before fragmentation.
I32 cmAccPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.12.1.25	Integer32	read-write	This object specifies the wfq weight value.
cmEthernetAccPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.13		not-accessible	A list of entries corresponding to Ethernet Access Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device.
cmEthernetAccPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.13.1		not-accessible	A conceptual row in the cmEthernetAccPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port.
I32 cmEthernetAccPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.13.1.1	Integer32	read-only	Unique Index value to access the CPD row.
CMC cmEthernetAccPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetAccPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetAccPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetAccPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetAccPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetAccPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmEthernetAccPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetAccPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetAccPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetAccPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetAccPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmEthernetAccPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetAccPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetAccPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetAccPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetAccPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetAccPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetAccPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmEthernetAccPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetAccPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetAccPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetAccPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetAccPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetAccPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC cmEthernetAccPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetAccPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetAccPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
MAC cmEthernetAccPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.13.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
CMC cmEthernetAccPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetAccPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetAccPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetAccPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetAccPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetAccPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetAccPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetAccPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetAccPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetAccPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetAccPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetAccPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetAccPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetAccPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetAccPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetAccPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetAccPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetAccPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetAccPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetAccPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.49	CmControlProtocolDispType	read-write	PTP untagged frame Disposition type.
CMC cmEthernetAccPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
cmFlowCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.14		not-accessible	A list of entries corresponding to Ethernet Flow Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices.
cmFlowCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.14.1		not-accessible	A conceptual row in the cmFlowCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Flow.
I32 cmFlowCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.14.1.1	Integer32	read-only	Unique Index value to access the CPD row.
CMC cmFlowCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmFlowCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmFlowCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmFlowCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmFlowCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmFlowCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmFlowCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmFlowCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmFlowCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmFlowCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmFlowCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmFlowCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmFlowCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmFlowCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmFlowCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmFlowCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmFlowCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmFlowCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmFlowCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmFlowCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmFlowCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmFlowCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmFlowCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmFlowCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC cmFlowCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMA cmFlowCpdV2ActiveControlProtocols	1.3.6.1.4.1.2544.1.12.4.1.14.1.27	CmActiveControlProtocolsType	read-only	List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
CMC cmFlowCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmFlowCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.29	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC cmFlowCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmFlowCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmFlowCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmFlowCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmFlowCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmFlowCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmFlowCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmFlowCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmFlowCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmFlowCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmFlowCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmFlowCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmFlowCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmFlowCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmFlowCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmFlowCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmFlowCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmFlowCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmFlowCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
cmEthernetNetPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.15		not-accessible	A list of entries corresponding to Ethernet Network Port Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices.
cmEthernetNetPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.15.1		not-accessible	A conceptual row in the cmEthernetNetPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
I32 cmEthernetNetPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.15.1.1	Integer32	read-only	Unique Index value to access the CPD row.
CMC cmEthernetNetPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetNetPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetNetPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetNetPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetNetPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetNetPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmEthernetNetPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetNetPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetNetPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetNetPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetNetPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmEthernetNetPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetNetPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetNetPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetNetPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetNetPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetNetPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetNetPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmEthernetNetPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetNetPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetNetPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetNetPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetNetPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetNetPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC cmEthernetNetPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetNetPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetNetPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
MAC cmEthernetNetPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.15.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
CMC cmEthernetNetPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetNetPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetNetPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetNetPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetNetPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetNetPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetNetPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetNetPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetNetPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetNetPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetNetPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetNetPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetNetPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetNetPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetNetPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetNetPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetNetPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetNetPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetNetPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetNetPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.49	CmControlProtocolDispType	read-write	PTP non forwarding untagged frame Disposition type.
CMC cmEthernetNetPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
bitsPortTable	1.3.6.1.4.1.2544.1.12.4.1.16		not-accessible	A list of entries corresponding to BITS Port Facilities for configuration purposes.
bitsPortEntry	1.3.6.1.4.1.2544.1.12.4.1.16.1		not-accessible	A conceptual row in the bitsPortTable.
I32 bitsPortTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.1	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Value 1 stands for BITS-IN, 2 for BITS-OUT.
I32 bitsPortIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.2	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bitsPortIndex.
NUM bitsPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for Bits Port. An integer index value used to uniquely identify this Bits Port.
PHY bitsPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM bitsPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.16.1.5	AdminState	read-write	This object represents the Administrative State of the BITS Port.
OPE bitsPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.16.1.6	OperationalState	read-only	This object represents the Operational State of the BITS Port.
SEC bitsPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.16.1.7	SecondaryState	read-only	This object represents the Secondary State of the BITS Port.
BIT bitsPortType	1.3.6.1.4.1.2544.1.12.4.1.16.1.8	BitsPortType	read-only	This object represents the BITS Port Type.
BIT bitsPortLineType	1.3.6.1.4.1.2544.1.12.4.1.16.1.9	BitsPortLineType	read-write	This object represents the BITS Port Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode.
BIT bitsPortLineCode	1.3.6.1.4.1.2544.1.12.4.1.16.1.10	BitsPortLineCode	read-write	This object represents the BITS Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the port is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3. When the port is configured for a Line Type of 2048kHz, the value is none.
BIT bitsPortFrameFormat	1.3.6.1.4.1.2544.1.12.4.1.16.1.11	BitsFrameFormat	read-write	This object represents the BITS Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When the port is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. When the port is configured for a Line Type of 2048kHz, the value is none. R4.1CC and R4.3CC do not support e1-unframed.
SAB bitsPortSaBitDesignation	1.3.6.1.4.1.2544.1.12.4.1.16.1.12	SaBitDesignation	read-write	This object represents the BITS Port Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is None. For E1 Line Type, the default value is bit4 and it can only have a value of None if QL Mode is disabled, otherwise, None is an invalid value.
T/F bitsPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.16.1.13	TruthValue	read-write	This object allows to specify whether the BITS Port can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM bitsPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.14	SSMQualityLevel	read-write	This object allows to specify the expected QL when the BITS Port is enabled for QL Mode. This object allows the user to set a minimum expected received Quality Level on the port. The default value shall be None.
SSM bitsPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.15	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the BITS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM bitsPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.16	SSMQualityLevel	read-only	This object provides the Received QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
SSM bitsPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.17	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
SSM bitsPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.18	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the BITS-OUT port. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determine whether or not to squelch the output of the BITS-OUT port. If the system's QL is lower than the Squelch QL, the output is squelched. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
LIN bitsPortLineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.16.1.19	LineBuildOut	read-write	This object allows to manage the line build out on the BITS-OUT port when the Line Type is T1.
BIT bitsPortImpedance	1.3.6.1.4.1.2544.1.12.4.1.16.1.20	BitsPortImpedanceMode	read-only	This object provides the impedance mode for the BITS-OUT port.
T/F bitsPortCrc4	1.3.6.1.4.1.2544.1.12.4.1.16.1.21	TruthValue	read-write	This object allows to include or not the CRC to the signal of the BITS-OUT port.
INT bitsPortIdleCode	1.3.6.1.4.1.2544.1.12.4.1.16.1.22	INTEGER	read-write	This object allows to manage the Idle Code for the BITS-OUT port.
T/F bitsPortAis	1.3.6.1.4.1.2544.1.12.4.1.16.1.23	TruthValue	read-write	This object allows to set the AIS signal for the BITS-OUT port.
SAB bitsPortSaBitsAdminState	1.3.6.1.4.1.2544.1.12.4.1.16.1.24	SaBitsState	read-write	This object allows to manage the five Sa Bit values, from bit4 to bit8, for the BITS-OUT port. The object value is a BIT string that concatenate the Sa Bit values. The Sa Bit values are applied to each of the five Sa Bits of the output signal except to the one that carries SSM information when QL Mode is enabled.
SQU bitsPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.16.1.25	SquelchControl	read-only	This object indicates the Squelch Control for the port. The Squelch Control determines the type of squelch control used to squelch an output of the port.
SIG bitsPortSignalShape	1.3.6.1.4.1.2544.1.12.4.1.16.1.26	SignalShape	read-only	This object represents the Port Signal Shape. Indicates whether the signal has a sine or a square shape.
SIG bitsPortSignalFrequency	1.3.6.1.4.1.2544.1.12.4.1.16.1.27	SignalFrequency	read-write	Indicates the signal frequency of the port. Possible value are 100 kHz, 1 MHz, 1544 kHz, 2048 kHz, 5 MHz, 25 Mhz or 50 MHz. It can be set only to a port that is dedicated to yield a variety of frequencies.
ieee1588EthernetPortTable	1.3.6.1.4.1.2544.1.12.4.1.17		not-accessible	A list of entries corresponding to IEEE Ethernet Port Facilities for configuration purposes.
ieee1588EthernetPortEntry	1.3.6.1.4.1.2544.1.12.4.1.17.1		not-accessible	A conceptual row in the IEEE Ethernet Port Table.
I32 ieee1588EthernetPortIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.1	Integer32	read-only	An integer index value used to uniquely identify the IEEE Ethernet Port.
NUM ieee1588EthernetPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for the IEEE Ethernet Port.
PHY ieee1588EthernetPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM ieee1588EthernetPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.17.1.4	AdminState	read-write	This object represents the Administrative State of the Port.
OPE ieee1588EthernetPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.17.1.5	OperationalState	read-only	This object represents the Operational State of the Port.
SEC ieee1588EthernetPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.17.1.6	SecondaryState	read-only	This object represents the Secondary State of the Port.
I32 ieee1588EthernetPortMTU	1.3.6.1.4.1.2544.1.12.4.1.17.1.7	Integer32	read-write	This object provides the MTU on the Port.
ETH ieee1588EthernetPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.17.1.8	EthernetMediaType	read-write	This object represents the type of Media.
ETH ieee1588EthernetPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.17.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Port.
ETH ieee1588EthernetPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.17.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Port.
CME ieee1588EthernetPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.17.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Port.
gps10MHzPortTable	1.3.6.1.4.1.2544.1.12.4.1.18		not-accessible	A list of entries corresponding to GPS 10MHz Facilities for configuration purposes.
gps10MHzPortEntry	1.3.6.1.4.1.2544.1.12.4.1.18.1		not-accessible	A conceptual row in the GPS 10MHz Port Table.
I32 gps10MHzPortIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.1	Integer32	read-only	An integer index value used to uniquely identify the IEEE Ethernet Port.
NUM gps10MHzPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for the IEEE Ethernet Port.
PHY gps10MHzPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM gps10MHzPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.18.1.4	AdminState	read-write	This object represents the Administrative State of the Port.
OPE gps10MHzPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.18.1.5	OperationalState	read-only	This object represents the Operational State of the Port.
SEC gps10MHzPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.18.1.6	SecondaryState	read-only	This object represents the Secondary State of the Port.
SIG gps10MHzPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.18.1.7	SignalDirectionType	read-write	This object allows specification of the signal type (i.e. input or output).
SQU gps10MHzPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.18.1.8	SquelchControl	read-write	This object allows to set the Squelch Control for the 10MHz port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port. Only option supported is squelch-ql.
SSM gps10MHzPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.18.1.9	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
NUM gps10MHzPortFrequencySource	1.3.6.1.4.1.2544.1.12.4.1.18.1.10	VariablePointer	read-write	This object allows to set the Frequency Source for the Port.
U32 gps10MHzPortClockClass	1.3.6.1.4.1.2544.1.12.4.1.18.1.11	Unsigned32	read-only	This object specify GPS port clock class.
U32 gps10MHzPortClockAccuracy	1.3.6.1.4.1.2544.1.12.4.1.18.1.12	Unsigned32	read-only	This object specify GPS port clock accuracy.
TIM gps10MHzPortTimeSource	1.3.6.1.4.1.2544.1.12.4.1.18.1.13	TimeSource	read-only	This object specify GPS port time source.
SSM gps10MHzPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.18.1.14	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the GPS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
STR gps10MHzPortAlias	1.3.6.1.4.1.2544.1.12.4.1.18.1.15	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
CLK gps10MHzPortInputSignalType	1.3.6.1.4.1.2544.1.12.4.1.18.1.16	ClkSignalType	read-write	This object allows specification of the input signal type (i.e. 10mhz or 2048khz).
cmEthernetNetPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.19		not-accessible	A list of entries corresponding to Ethernet Network Port Cable Length Benchmark.
cmEthernetNetPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.19.1		not-accessible	A conceptual row in the cmEthernetNetPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Network Port.
I32 cmEthernetNetPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.19.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
T/F cmEthernetNetPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.19.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
STR cmEthernetNetPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.19.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
STR cmEthernetNetPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.19.1.4	DisplayString	read-write	A textual string containing description of cable span.
cmNetPortPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.20		not-accessible	A list of entries corresponding to Ethernet Network Port Priority Mappings in multi Class of Service (COS) mode.
cmNetPortPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.20.1		not-accessible	A conceptual row in the cmNetPortPrioMapTable.
I32 cmNetPortPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.20.1.1	Integer32	read-only	The integer index value corresponding to a priority value.
I32 cmNetPortPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.20.1.2	Integer32	read-write	The integer index value corresponding to a priority value.
I32 cmNetPortPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.20.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
VLA cmNetPortPrioMapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.20.1.4	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (N2A direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowN2AOuterTagPrioEnabled'.
cmAccPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.21		not-accessible	Ethernet Access Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Access port.
cmAccPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.21.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
I32 cmAccPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.21.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
VLA cmAccPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.21.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmAccPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.21.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmAccPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.21.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
cmAccPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.22		not-accessible	Ethernet Access Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmAccPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.22.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
I32 cmAccPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.22.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
VLA cmAccPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.22.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmAccPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.22.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
T/F cmAccPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.22.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
cmAccPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.23		not-accessible	Ethernet Access Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmAccPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.23.1		not-accessible	A conceptual row in the cmAccPortPcpDEPairEntry.
I32 cmAccPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.23.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
VLA cmAccPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.23.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmAccPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.23.1.3	VlanPriority	read-write	This object is the drop eligible priority.
cmNetPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.24		not-accessible	Ethernet Network Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.24.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
I32 cmNetPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.24.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
VLA cmNetPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.24.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmNetPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.24.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmNetPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.24.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
cmNetPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.25		not-accessible	Ethernet Network Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmNetPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.25.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
I32 cmNetPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.25.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
VLA cmNetPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.25.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.25.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
T/F cmNetPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.25.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
cmNetPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.26		not-accessible	Ethernet Network Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmNetPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.26.1		not-accessible	A conceptual row in the cmNetPortPcpDEPairEntry.
I32 cmNetPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.26.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
VLA cmNetPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.26.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.26.1.3	VlanPriority	read-write	This object is the drop eligible priority.
cmEthernetTrafficPortTable	1.3.6.1.4.1.2544.1.12.4.1.27		not-accessible	A list of entries corresponding to Ethernet Facilities for configuration purposes.
cmEthernetTrafficPortEntry	1.3.6.1.4.1.2544.1.12.4.1.27.1		not-accessible	A conceptual row in the cmEthernetTrafficPortTable.
I32 cmEthernetTrafficPortIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Port within a card. Note that each Ethernet Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex.
NUM cmEthernetTrafficPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Port. An integer index value used to uniquely identify this Ethernet Port.
PHY cmEthernetTrafficPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM cmEthernetTrafficPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.27.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Port.
OPE cmEthernetTrafficPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.27.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Port.
SEC cmEthernetTrafficPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.27.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Port.
I32 cmEthernetTrafficPortMTU	1.3.6.1.4.1.2544.1.12.4.1.27.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Port. The object is made read-write for FSP150CC devices.
ETH cmEthernetTrafficPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Port. The media type includes, copper (1) fiber (2) coppersfp (3) CM Aggregation Product doesn't support copper.
ETH cmEthernetTrafficPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.27.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Port.
ETH cmEthernetTrafficPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.27.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Port.
CME cmEthernetTrafficPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.27.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Port.
CME cmEthernetTrafficPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.12	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet port.
STR cmEthernetTrafficPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.27.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
STR cmEthernetTrafficPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
STR cmEthernetTrafficPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is shown only when cmEthernetTrafficPortMediaType is fiber.
DAT cmEthernetTrafficPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.27.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
SFP cmEthernetTrafficPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
I32 cmEthernetTrafficPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.18	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
I32 cmEthernetTrafficPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.19	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetTrafficPortMediaType is fiber.
SFP cmEthernetTrafficPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.20	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
CML cmEthernetTrafficPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.27.1.21	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Port.
CML cmEthernetTrafficPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.22	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Port.
I32 cmEthernetTrafficPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.23	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Port.
CMS cmEthernetTrafficPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.27.1.24	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
INT cmEthernetTrafficPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.27.1.25	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled
STR cmEthernetTrafficPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.27.1.26	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.27.1.27	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.27.1.28	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
T/F cmEthernetTrafficPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.29	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Port.
CML cmEthernetTrafficPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.27.1.30	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled.
CML cmEthernetTrafficPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.27.1.31	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled.
I32 cmEthernetTrafficPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.27.1.32	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
T/F cmEthernetTrafficPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.27.1.33	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
T/F cmEthernetTrafficPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.34	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
I32 cmEthernetTrafficPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.27.1.35	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet port.
STR cmEthernetTrafficPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.27.1.36	DisplayString	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet port. The Ethernet port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end. Input format allows multiple Remote Link Ids seperated by comma (e.g. 1,2,3,10,20...). Number range is product-specific (for EGX8.1, max value is 554). Empty string clears the configuration.
CML cmEthernetTrafficPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.27.1.37	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Ethernet Port's behavior when link loss forwarding trigger events occur on the Port. This provides ability to configure per Ethernet port LLF behavior.
STR cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.27.1.38	DisplayString	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Ethernet Port.
I32 cmEthernetTrafficPortOamId	1.3.6.1.4.1.2544.1.12.4.1.27.1.39	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
CMO cmEthernetTrafficPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.27.1.40	CmOamDiscoveryState	read-only	Ethernet Port's OAM discovery state.
T/F cmEthernetTrafficPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.41	TruthValue	read-only	This object allows specification of whether the Ethernet Port supports sending variable response OAMPDUs.
T/F cmEthernetTrafficPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.42	TruthValue	read-only	This object allows specification of whether the Ethernet Port supports interpreting Link Events.
T/F cmEthernetTrafficPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.27.1.43	TruthValue	read-write	This object allows specification of whether the Ethernet Port is capable of OAM remote loopback mode.
T/F cmEthernetTrafficPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.44	TruthValue	read-only	This object allows specification of whether the Ethernet Port is capable of sending OAMPDUs when the receive path is non-operational.
I32 cmEthernetTrafficPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.27.1.45	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
CMO cmEthernetTrafficPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.46	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
MAC cmEthernetTrafficPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.47	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
T/F cmEthernetTrafficPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.48	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
T/F cmEthernetTrafficPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.49	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
T/F cmEthernetTrafficPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.27.1.50	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetTrafficPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.51	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
I32 cmEthernetTrafficPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.27.1.52	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
CMO cmEthernetTrafficPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.53	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
T/F cmEthernetTrafficPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.54	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Traffic Port.
CMO cmEthernetTrafficPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.27.1.55	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
CME cmEthernetTrafficPortSvcType	1.3.6.1.4.1.2544.1.12.4.1.27.1.56	CmEthernetTrafficSvcType	read-write	This object allows specification of whether the Ethernet Port is port based or vlan based.
T/F cmEthernetTrafficPortRxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.57	TruthValue	read-write	This object defines the RxPause enable or disable of the port.
T/F cmEthernetTrafficPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.58	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet port.
CMA cmEthernetTrafficPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.27.1.59	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames.
T/F cmEthernetTrafficPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.60	TruthValue	read-write	This object allows to manage the Ethernet Port Shaping. When enabled, values in cmEthernetTrafficPortShapedSpeedLo and cmEthernetTrafficPortShapedSpeedHi are applicable.
U32 cmEthernetTrafficPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.27.1.61	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Ethernet Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled.
U32 cmEthernetTrafficPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.27.1.62	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled.
U32 cmEthernetTrafficPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.27.1.63	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Port.
AFP cmEthernetTrafficPortTagFrameControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.64	AfpTagControl	read-write	This object defines if c-tag/s-tag frame is allowed to pass through, available only when AFP is set to Tagged.
T/F cmEthernetTrafficPortEgressVlanTrunkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.65	TruthValue	read-write	This object allows to enable or disable the VLAN trunking on Ethernet port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of the port. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortIngressPushPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.66	TruthValue	read-write	This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be PUSHed on untagged frames or not in the ingress direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortEgressPopPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.67	TruthValue	read-write	This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be POPed in the egress direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortEgressPopPriorityVidEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.68	TruthValue	read-write	This object defines the egress PopPriorityVid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped back to VID=0. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortEgressSwapPriorityVIDEnabled
VLA cmEthernetTrafficPortPortVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.69	VlanId	read-write	This object allows to specify the Ethernet Port VLAN Id to PUSH on untagged frames in the to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled is set to true.
VLA cmEthernetTrafficPortPortVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.27.1.70	VlanPriority	read-write	This object allows to specify the Ethernet Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetTrafficPortPortVlanId) on untagged frames in the ingress direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled is set to true.
VLA cmEthernetTrafficPortPriorityVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.71	VlanId	read-write	This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is only applicable for connection-oriented, evpl service type. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortSwapPriorityVID
PRI cmEthernetTrafficPortIngressPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.72	PriorityMapMode	read-write	This object allows to specify the Ethernet Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented, evpl service type.
VLA cmEthernetTrafficPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.27.1.73	VlanTagType	read-create	This object is used to specify whether the EthernetTrafficPort uses the inner-tag or the outer-tag in determining the COS (Class of Service). This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
T/F cmEthernetTrafficPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.74	TruthValue	read-write	This object allows to specify whether the Ethernet Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
T/F cmEthernetTrafficPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.75	TruthValue	read-write	This object allows to specify whether the Ethernet Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM cmEthernetTrafficPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.76	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
SSM cmEthernetTrafficPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.77	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port TransmitQL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM cmEthernetTrafficPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.78	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
SSM cmEthernetTrafficPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.79	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
XGE cmEthernetTrafficPortPhyType	1.3.6.1.4.1.2544.1.12.4.1.27.1.80	XgePhyType	read-write	This object is valid only to XGE card. And the value should be LAN or WAN when it is XGE card.
U32 cmEthernetTrafficPortSfpLaserWaveLengthPicometer	1.3.6.1.4.1.2544.1.12.4.1.27.1.81	Unsigned32	read-only	This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then cmEthernetTrafficPortSfpLaserWaveLength=1510 and cmTrafficPortSfpLaserWaveLengthPicometer=10.
ROW cmEthernetTrafficPortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.82	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmEthernetTrafficPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmEthernetTrafficPortRowStatus object may be modified if the associated instance of this object is equal to active(1).
MAC cmEthernetTrafficPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.83	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
INT cmEthernetTrafficPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.27.1.84	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled
STR cmEthernetTrafficPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.27.1.85	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.27.1.86	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.27.1.87	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
OID cmEthernetTrafficPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.88	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
T/F cmEthernetTrafficPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.27.1.89	TruthValue	read-only	This object means this module whether tunnable.
U32 cmEthernetTrafficPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.90	Unsigned32	read-only	This object describes this module's frequency, and the step is 1GHZ.
T/F cmEthernetTrafficPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.27.1.91	TruthValue	read-write	This object describes whether use DEI bit in S-tag to recognize Drop Eligibility Parameter for ingress S-tag packets or Set DEI bit for egress S-tag Packets. This object is still supported by OSA8.1.1
PCP cmEthernetTrafficPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.27.1.92	PcpDEEncType	read-write	This object describes the PCP encoding mode for egress packets and the PCP decoding mode for ingress packets on this port.
PCP cmEthernetTrafficPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.93	PcpDEPairsAction	read-write	This object describes this port pcp de pairs action.
CME cmEthernetTrafficPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.27.1.94	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.95	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.96	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.97	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.98	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.99	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.100	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.101	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Traffic Port.
STR cmEthernetTrafficPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.27.1.102	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.103	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Traffic Port.
DAT cmEthernetTrafficPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.104	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
T/F cmEthernetTrafficPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.105	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
TRA cmEthernetTrafficPortDeleteEntitiesAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.106	TrafficPortDeleteEntitiesAction	read-write	This object allows to delete esa entities relate this port and Cfm entities relate this port.
I32 cmEthernetTrafficPortMaxMpFpNum	1.3.6.1.4.1.2544.1.12.4.1.27.1.107	Integer32	read-write	This object allows to set the mpflow max fp number, and now only the ports on ethernet10x1GCard, ethernet1x10GCard, ethernet1x10GHighPerCard, ethernet10x1GHighPerCard support this attribute. for others, cann't be set and will return 0.
T/F cmEthernetTrafficPortJdsuLoopbackEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.108	TruthValue	read-write	This object allows to enable or disable jdsu loopback on this port. Note: This object is deprecated.
VLA cmEthernetTrafficPortJdsuLoopbackVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.109	VlanId	read-only	This object allows to set the jdsu loopback vlan. if status is jdsu-terminal-port-tailend(19) or jdsu-facility-port-tailend(21), then VID is 0 means not applicable. Note: This object is deprecated.
T/F cmEthernetTrafficPortIngressPopPriorityVidEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.110	TruthValue	read-write	This object defines the Ingress PopPriorityVid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortIngressSwapPriorityVIDEnabled
RXD cmEthernetTrafficPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.111	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
TXD cmEthernetTrafficPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.112	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
DEI cmEthernetTrafficPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.27.1.113	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
DEI cmEthernetTrafficPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.27.1.114	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
CME cmEthernetTrafficPortMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.115	CmEthernetSvcPortMode	read-write	This object allows specification of whether the Ethernet Traffic Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offering MAC based services) mode.
CME cmEthernetTrafficPortServiceType	1.3.6.1.4.1.2544.1.12.4.1.27.1.116	CmEthernetSvcType	read-write	This object allows specification of whether the Ethernet Traffic Port provides transparent port based services, or multi-flow VLAN based services.
T/F cmEthernetTrafficPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.117	TruthValue	read-write	This object allows to Enable/Disable the Traffic Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetTrafficPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.118	TruthValue	read-write	This object allows to Enable/Disable the Traffic Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
MAC cmEthernetTrafficPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.119	MacAddress	read-write	This object allows to set Traffic Port Source MAC Address for frame matching when Traffic Port Source MAC Control is enabled.
MAC cmEthernetTrafficPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.120	MacAddress	read-write	This object allows to set Traffic Port Destination MAC Address for frame matching when Traffic Port Destination MAC Control is enabled.
T/F cmEthernetTrafficPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.121	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
ETH cmEthernetTrafficPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.27.1.122	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Traffic Port.
T/F cmEthernetTrafficPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.123	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Traffic Port.
MAC cmEthernetTrafficPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.124	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
T/F cmEthernetTrafficPortIngressSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.125	TruthValue	read-write	This object defines the Ingress Swap Priority Vid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID.
T/F cmEthernetTrafficPortEgressSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.126	TruthValue	read-write	This object defines the egress Swap Priority Vid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped back to VID=0.
VLA cmEthernetTrafficPortSwapPriorityVID	1.3.6.1.4.1.2544.1.12.4.1.27.1.127	VlanId	read-write	This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is only applicable for connection-oriented, evpl service type.
PCP cmEthernetTrafficPortExpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.27.1.128	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in exp bits of the VLAN tag.
PCP cmEthernetTrafficPortExpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.129	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetTrafficPortExpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmEthernetTrafficPortExpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
IP cmEthernetTrafficPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.27.1.130	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
TOG cmEthernetTrafficPortTxSsm	1.3.6.1.4.1.2544.1.12.4.1.27.1.131	ToggleValue	read-write	This object allows to manage (enable/disable) TX SMM on OSA540X ethernet port.
SYN cmEthernetTrafficPortRxSsmQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.132	SynceRxSsmQl	read-write	This object allows to manage how RX quality level is utilized on OSA540X ethernet port.
SYN cmEthernetTrafficPortSyncEMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.133	SynceMode	read-write	This object allows to manage SyncE mode (master or slave) on OSA540X ethernet port.
U32 cmEthernetTrafficPortSyncEServiceAvailableTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.134	Unsigned32	read-only	This object allows to manage service available time (seconds) for SYNCE.
U32 cmEthernetTrafficPortSyncEServiceUnavailableTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.135	Unsigned32	read-only	This object allows to manage service unavailable time (seconds) for SYNCE.
STR cmEthernetTrafficPortSyncEServiceAvailablePercentage	1.3.6.1.4.1.2544.1.12.4.1.27.1.136	DisplayString	read-only	This object allows to manage service available in percentage [XXX.YY%] for SYNCE.
I32 cmEthernetTrafficPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.27.1.137	Integer32	read-write	This object is used to specify the wfq segmentation cos value.
I32 cmEthernetTrafficPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.27.1.138	Integer32	read-write	This object is used to specify the wfq group cos value.
U32 cmEthernetTrafficPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.27.1.139	Unsigned32	read-write	This object is used to specify the wfq group eir low 32 bits value.
U32 cmEthernetTrafficPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.27.1.140	Unsigned32	read-write	This object is used to specify the wfq group eir high 32 bits value.
T/F cmEthernetTrafficPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.27.1.141	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Traffic Port.
U32 cmEthernetTrafficPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.27.1.142	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Traffic Port.
STR cmEthernetTrafficPortSfpTxPowerLevel	1.3.6.1.4.1.2544.1.12.4.1.27.1.143	DisplayString	read-only	This object provides the SFP TX power level in dBm. The format would be [+/-]XX.YYYY. Note: the sign [+/-] and the decimal point (.YYYY) are optional.
STR cmEthernetTrafficPortSfpRxPowerLevel	1.3.6.1.4.1.2544.1.12.4.1.27.1.144	DisplayString	read-only	This object provides the SFP TX power level in dBm. The format would be [+/-]XX.YYYY. Note: the sign [+/-] and the decimal point (.YYYY) are optional.
NUM cmEthernetTrafficPortBwResourcePort	1.3.6.1.4.1.2544.1.12.4.1.27.1.145	VariablePointer	read-write	Specifies a port whose bandwidth resources will be used. This object is applicable only for VM Server ports.
STR cmEthernetTrafficPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.27.1.146	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetTrafficPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.27.1.147	DisplayString	read-only	This object provides the hardware revision of the SFP.
T/F cmEthernetTrafficPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.148	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
IP cmEthernetTrafficPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.27.1.149	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
T/F cmEthernetTrafficPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.150	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
ADR cmEthernetTrafficPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.27.1.151	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
OID cmEthernetTrafficPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.152	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
PLU cmEthernetTrafficPortPlugType	1.3.6.1.4.1.2544.1.12.4.1.27.1.153	PlugType	read-write	This specifies the port's plug type.
PLU cmEthernetTrafficPortPlugMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.154	PlugMode	read-write	This specifies if the plug is acting as head-end or tail-end.
GME cmEthernetTrafficPortPlugGMetroAutoTuningMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.155	GMetroAutoTuningMode	read-write	This is tuning mode for G.Metro plug.
CHA cmEthernetTrafficPortPlugChannelType	1.3.6.1.4.1.2544.1.12.4.1.27.1.156	ChannelType	read-write	This specifies plug's type channel configuration.
OID cmEthernetTrafficPortPlugITUCbandChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.157	ITUCBandChannelIdentifier	read-write	If Channel Type is ITU-CBAND, this is the local plug's ITU C-band channel.
OID cmEthernetTrafficPortPlugRelativeChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.158	RelativeChannelIdentifier	read-write	If Channel Type is RELATIVE-CHANNEL-NUMBER, this is the local plug's relative channel.
OID cmEthernetTrafficPortPlugFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.159	FrequencyIdentifier	read-write	If Channel Type is FREQUENCY, this is the local plug's frequency.
OUT cmEthernetTrafficPortPlugOutOfBandChannelStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.160	OutOfBandChannelStatus	read-only	Status of the out of band channel between the local and remote plug.
OID cmEthernetTrafficPortRemotePlugITUCbandChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.161	ITUCBandChannelIdentifier	read-write	If Channel Type is ITU-CBAND, this is the remote plug's ITU C-band channel.
OID cmEthernetTrafficPortRemotePlugRelativeChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.162	RelativeChannelIdentifier	read-write	If Channel Type is RELATIVE-CHANNEL-NUMBER, this is the remote plug's relative channel.
OID cmEthernetTrafficPortRemotePlugFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.163	FrequencyIdentifier	read-write	If Channel Type is FREQUENCY, this is the remote plug's frequency.
STR cmEthernetTrafficPortRemoteSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.27.1.164	DisplayString	read-only	This object provides the vendor name of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpName	1.3.6.1.4.1.2544.1.12.4.1.27.1.165	DisplayString	read-only	This object provides the official name of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.166	DisplayString	read-only	This object provides the part number of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.27.1.167	DisplayString	read-only	This object provides the hardware revision of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.168	DisplayString	read-only	This object provides the serial number of the Remote SFP.
DAT cmEthernetTrafficPortRemoteSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.27.1.169	DateAndTime	read-only	This object provides the date of manufacture of the Remote SFP.
I32 cmEthernetTrafficPortRemoteSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.170	Integer32	read-only	This object provides Link Length of the Remote SFP.
I32 cmEthernetTrafficPortRemoteSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.171	Integer32	read-only	This object provides Laser Wave Length in nano meters of the Remote SFP.
U32 cmEthernetTrafficPortRemoteSfpLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.172	Unsigned32	read-only	This object provides frequency of the Remote SFP, the step is 1GHZ.
SFP cmEthernetTrafficPortRemoteSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.173	SfpMediaType	read-only	This object provides Media Type of the Remote SFP.
SFP cmEthernetTrafficPortRemoteSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.174	SfpConnectorValue	read-only	This object provides Connector Type of the Remote SFP.
OID cmEthernetTrafficPortRemoteSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.175	SfpIdentifierValue	read-only	This object provides the Remote SFP identifier value.
cmElineFlowTable	1.3.6.1.4.1.2544.1.12.4.1.28		not-accessible	A list of entries corresponding to Flows for configuration purposes.
cmElineFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.28.1		not-accessible	A conceptual row in the cmElineFlowTable. These entries represent an Flow.
I32 cmElineFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.28.1.1	Integer32	read-create	The integer index value corresponding to an Flow.
STR cmElineFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.28.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the Flow.
ADM cmElineFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.28.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
OPE cmElineFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.28.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
SEC cmElineFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.28.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
NUM cmElineFlowFP1	1.3.6.1.4.1.2544.1.12.4.1.28.1.6	VariablePointer	read-create	This object allows SNMP management entities to provide a flowpoint with the Flow.
NUM cmElineFlowFP2	1.3.6.1.4.1.2544.1.12.4.1.28.1.7	VariablePointer	read-create	This object allows SNMP management entities to provide another flowpoint with the Flow.
STO cmElineFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.28.1.8	StorageType	read-create	The type of storage configured for this entry.
ROW cmElineFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.28.1.9	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmElineFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmElineFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmElineFlowRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.29		not-accessible	A list of entries corresponding to FlowPoint for configuration purposes.
cmFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.29.1		not-accessible	A conceptual row in the cmFlowPointTable. These entries represent an FlowPoint. If the flowpoint attached to a lag, the slotIndex should be 255(255 is used to identify the flowpoint belongs to lag), and the cmEthernetTrafficPortIndex should be the f3LagIndex.
I32 cmFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.29.1.1	Integer32	read-create	The integer index value corresponding to an FlowPoint.
STR cmFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.29.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the FlowPoint.
ADM cmFlowPointAdminState	1.3.6.1.4.1.2544.1.12.4.1.29.1.3	AdminState	read-write	This object represents the Administrative State of the FlowPoint.
OPE cmFlowPointOperationalState	1.3.6.1.4.1.2544.1.12.4.1.29.1.4	OperationalState	read-only	This object represents the Operational State of the FlowPoint.
SEC cmFlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.29.1.5	SecondaryState	read-only	This object represents the Secondary State of the FlowPoint.
NUM cmFlowPointAssociatedFlowId	1.3.6.1.4.1.2544.1.12.4.1.29.1.6	VariablePointer	read-only	This object provides the association of an Flow with an FlowPoint.
T/F cmFlowPointIngressMultiCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.7	TruthValue	read-create	This object allows specification of ingress multiple COS (Class of Service) FlowPoint.
I32 cmFlowPointIngressCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.8	Integer32	read-create	This object allows specification of ingress COS (Class of Service) FlowPoint.
STR cmFlowPointIngressVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.29.1.9	DisplayString	read-create	It allows specification of VLAN members of the FlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flowpoint is created, this attribute can only be updated using cmFlowPointVlanMemberAction and cmFlowPointVlanMemberActionVlan objects.
FLO cmFlowPointVlanMemberAction	1.3.6.1.4.1.2544.1.12.4.1.29.1.10	FlowVlanActionType	read-write	This object allows to add or remove the VLAN members specified by cmFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowPointVlanMemberActionVlan and then should specify cmFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
STR cmFlowPointVlanMemberActionVlan	1.3.6.1.4.1.2544.1.12.4.1.29.1.11	DisplayString	read-create	This object allows adding/removing VLAN members to a flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmFlowPointVlanMemberAction.
T/F cmFlowPointIngressUntaggedFrameEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.12	TruthValue	read-create	This object allows to specify whether or not the flowpoint supports untagged frame.
FLO cmFlowPointCTagControl	1.3.6.1.4.1.2544.1.12.4.1.29.1.13	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowPointCTagVlanId) and priority (cmFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified cmFlowPointCTagVlanId and cmFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
VLA cmFlowPointCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.29.1.14	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmFlowPointCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.15	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
FLO cmFlowPointSTagControl	1.3.6.1.4.1.2544.1.12.4.1.29.1.16	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowPointSTagVlanId) and priority (cmFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified cmFlowPointSTagVlanId and cmFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
VLA cmFlowPointSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.29.1.17	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmFlowPointSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.18	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
T/F cmFlowPointEgressOuterTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.19	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled,it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmFlowPointColorMarkingSupported	1.3.6.1.4.1.2544.1.12.4.1.29.1.20	TruthValue	read-create	This object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed will be remarked according the meter result. If set to Disabled, the DEI bit is forced to 0.
NUM cmFlowPointAssociatedAclProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.21	VariablePointer	read-create	This object provides the association of an Flow with an ACL profile.
I32 cmFlowPointSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.29.1.22	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA functionality.
STO cmFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.29.1.23	StorageType	read-create	The type of storage configured for this entry.
ROW cmFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.29.1.24	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F cmFlowPointDefaultMemberEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.25	TruthValue	read-write	defaultMemberEnabled with enabled means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.
T/F cmFlowPointMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.26	TruthValue	read-write	Whether multicast packets need be limited per FP.
U32 cmFlowPointMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.27	Unsigned32	read-write	The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmFlowPointMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.28	Unsigned32	read-write	The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F cmFlowPointBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.29	TruthValue	read-write	Whether broadcast packets need be limited per FP.
U32 cmFlowPointBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.30	Unsigned32	read-write	The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmFlowPointBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.31	Unsigned32	read-write	The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
NUM cmFlowPointSplitHorizonGroupOID	1.3.6.1.4.1.2544.1.12.4.1.29.1.32	VariablePointer	read-write	Specifies the Split-Horizon Group EID. If there is no SHG, the value is none.
NUM cmFlowPointLoopAvoidance	1.3.6.1.4.1.2544.1.12.4.1.29.1.33	VariablePointer	read-write	EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
T/F cmFlowPointHierarchicalCosEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.34	TruthValue	read-write	Enable or Disable Hierarchical COS shaping (flow shaping).
I32 cmFlowPointWfqQid	1.3.6.1.4.1.2544.1.12.4.1.29.1.35	Integer32	read-write	This attribute description the WFQ Qid.
I32 cmFlowPointWfqOutPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.36	Integer32	read-write	This attribute description the WFQ out priority.
U32 cmFlowPointMaximumBWLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.37	Unsigned32	read-write	This attribute description the flow point maximum bandwidth. This objects only represents low 32 bits.
U32 cmFlowPointMaximumBWHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.38	Unsigned32	read-write	This attribute description the flow point maximum bandwidth. This objects only represents high 32 bits.
U32 cmFlowPointGuaranteedBWLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.39	Unsigned32	read-write	This attribute description the flow point guaranteed bandwidth. This objects only represents low 32 bits.
U32 cmFlowPointGuaranteedBWHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.40	Unsigned32	read-write	This attribute description the flow point guaranteed bandwidth. This objects only represents high 32 bits.
NUM cmFlowPointRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.41	VariablePointer	read-write	This object allows to set priority map profile.
T/F cmFlowPointMcastAndBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.42	TruthValue	read-write	Whether multicast packets and broadcast packets need be limited per FP.
U32 cmFlowPointMcastAndBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.43	Unsigned32	read-write	The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmFlowPointMcastAndBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.44	Unsigned32	read-write	The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
SHA cmFlowPointEgressShapingType	1.3.6.1.4.1.2544.1.12.4.1.29.1.45	ShapingType	read-write	This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
T/F cmFlowPointEgressInnerTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.46	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmFlowPointAutoBandwidthConfigEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.47	TruthValue	read-create	This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available port bandwidth multiplied by the value of the cmFlowPointAutoCIRPercentage object. For a Hierarchical-COS Flow Point, the cmFlowPointMaximumBWLo and cmFlowPointMaximumBWHi are set to the maximum port bandwidth; the cmFlowPointGuaranteedBWLo and cmFlowPointGuaranteedBWHi are set to the available port bandwidth multiplied by the value of the cmFlowPointAutoCIRPercentage object. The value of this object must be FALSE when cmFlowPointIngressMultiCOSEnabled is TRUE and cmFlowPointHierarchicalCOSEnabled is FALSE.
I32 cmFlowPointAutoCIRPercentage	1.3.6.1.4.1.2544.1.12.4.1.29.1.48	Integer32	read-create	This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when cmFlowPointAutoBandwidthConfigEnabled is TRUE.
T/F cmFlowPointFrameFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.49	TruthValue	read-create	When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
T/F cmFlowPointUsePortPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.50	TruthValue	read-write	This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
NUM cmFlowPointRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.29.1.51	VariablePointer	read-create	This object specifies EoMpls Pw object OID.
STR cmFlowPointElmiEvcIdentifier	1.3.6.1.4.1.2544.1.12.4.1.29.1.52	DisplayString	read-create	This object specifies FlowPoint Evc Identifier required for E-LMI feature.
NUM cmFlowPointRefElpObject	1.3.6.1.4.1.2544.1.12.4.1.29.1.53	VariablePointer	read-create	This object specifies ELP object OID.
T/F cmFlowPointEfEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.54	TruthValue	read-create	When enabled FlowPoint is configured to monitor elephant(large) flows. When disabled, elephant flow management is not supported on the FlowPoint.
EFI cmFlowPointEfIdentificationType	1.3.6.1.4.1.2544.1.12.4.1.29.1.55	EfIdentificationType	read-write	The Elephant Flows are identified per flowpoint. This object specifies the type of Elephant Flow identification based on specific fields in the L2-L4 headers. The five-tuple identification includes the Source MAC Address, Destination MAC Address, Source IP Address, Destination IP Address and IP Protocol. The seven-tuple identification includes the five-tuple fields as well as Source Port and Destination Port. For Source and Destination ports, the supported protocols are TCP, UDP and SCTP.
U32 cmFlowPointEfRateThresholdLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.56	Unsigned32	read-write	This object specifies the threshold for the rate to declare a flow as an Elephant Flow. If cmFlowPointEfEnabled is enabled and this is set to 0, it is same as cmFlowPointEfEnabled control being disabled. This object only represents lower-order 32 bits.
U32 cmFlowPointEfRateThresholdHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.57	Unsigned32	read-write	This object specifies the threshold for the rate to declare a flow as an Elephant Flow. If cmFlowPointEfEnabled is enabled and this is set to 0, it is same as cmFlowPointEfEnabled control being disabled. This object only represents higher-order 32 bits.
ACL cmFlowPointAclNoMatchDisposition	1.3.6.1.4.1.2544.1.12.4.1.29.1.58	AclNoMatchDispositionType	read-write	This attribute allows specify ACL no match disposition type
EFI cmFlowPointEfIdentificationFields	1.3.6.1.4.1.2544.1.12.4.1.29.1.59	EfIdentificationFieldType	read-write	The Elephant Flows are identified per flowpoint. This object specifies the type of Elephant Flow identification based on specific fields in the L2-L4 headers. The identification includes the Source MAC Address, Destination MAC Address, Source IP Address, Destination IP Address, IP Protocol, Source Port and Destination Port. For Source and Destination ports, the supported protocols are TCP, UDP and SCTP.
I32 cmFlowPointWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.60	Integer32	read-write	This object is used to specify wfq segmentation COS value.
I32 cmFlowPointWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.61	Integer32	read-write	This object is used to specify wfq group COS value.
U32 cmFlowPointWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.62	Unsigned32	read-write	This object is used to specify wfq group EIR low 32 bits value.
U32 cmFlowPointWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.63	Unsigned32	read-write	This object is used to specify wfq group EIR high 32 bits value.
cmOAMFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.30		not-accessible	A list of entries corresponding to OAMFlowPoint for configuration purposes.
cmOAMFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.30.1		not-accessible	A conceptual row in the cmOAMFlowPointTable. These entries represent an FlowPoint. If the oam flowpoint attached to a lag, the slotIndex should be 255(255 is used to identify the oam flowpoint belongs to lag), and the cmEthernetTrafficPortIndex should be the f3LagIndex.
I32 cmOAMFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.30.1.1	Integer32	read-create	The integer index value corresponding to an OAMFlowPoint.
STR cmOAMFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.30.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the OAMFlowPoint.
ADM cmOAMFlowPointAdminState	1.3.6.1.4.1.2544.1.12.4.1.30.1.3	AdminState	read-write	This object represents the Administrative State of the OAMFlowPoint.
OPE cmOAMFlowPointOperationalState	1.3.6.1.4.1.2544.1.12.4.1.30.1.4	OperationalState	read-only	This object represents the Operational State of the OAMFlowPoint.
SEC cmOAMFlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.30.1.5	SecondaryState	read-only	This object represents the Secondary State of the OAMFlowPoint.
STR cmOAMFlowPointIngressVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.30.1.6	DisplayString	read-create	It allows specification of VLAN members of the OAMFlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flowpoint is created, this attribute can only be updated using cmOAMFlowPointVlanMemberAction and cmOAMFlowPointVlanMemberActionVlan objects.
FLO cmOAMFlowPointVlanMemberAction	1.3.6.1.4.1.2544.1.12.4.1.30.1.7	FlowVlanActionType	read-write	This object allows to add or remove the VLAN members specified by cmOAMFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmOAMFlowPointVlanMemberActionVlan and then should specify cmOAMFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
STR cmOAMFlowPointVlanMemberActionVlan	1.3.6.1.4.1.2544.1.12.4.1.30.1.8	DisplayString	read-create	This object allows adding/removing VLAN members to a oam flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmOAMFlowPointVlanMemberAction.
T/F cmOAMFlowPointIngressUntaggedFrameSupported	1.3.6.1.4.1.2544.1.12.4.1.30.1.9	TruthValue	read-create	This object allows to specify whether or not the OAMFlowPoint supports untagged frame.
I32 cmOAMFlowPointSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.30.1.10	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the oam flowpoint. This functionality is applicable if the oam flowpoint is monitored using the Y.1731 ESA functionality.
STO cmOAMFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.30.1.11	StorageType	read-create	The type of storage configured for this entry.
ROW cmOAMFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.30.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmOAMFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmOAMFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmOAMFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmIngressPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.31		not-accessible	A list of entries corresponding to Ingress Priority Mapping for configuration purposes.
cmIngressPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.31.1		not-accessible	A conceptual row in the cmIngressPrioMapTable.
I32 cmIngressPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.31.1.1	Integer32	read-only	The integer index value corresponding to a priority value based on the cmEthernetTrafficPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmIngressPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.31.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmEthernetTrafficPortIngressPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
I32 cmIngressPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.31.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
cmEgressPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.32		not-accessible	A list of entries corresponding to Egress Priority Mapping for configuration purposes.
cmEgressPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.32.1		not-accessible	A conceptual row in the cmEgressPrioMapTable.
I32 cmEgressCOSIndex	1.3.6.1.4.1.2544.1.12.4.1.32.1.1	Integer32	read-only	The integer index used to uniquely identify this Egress Priority Map Entry
I32 cmEgressCOS	1.3.6.1.4.1.2544.1.12.4.1.32.1.2	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
PRI cmEgressOuterTagCtrl	1.3.6.1.4.1.2544.1.12.4.1.32.1.3	PrioMapControlType	read-write	This object defines the behavior of the Priority portion of the frame transmit out. If NONE is selected, the outgoing priority bits are left unchanged. If SWAP is selected, the priority bits are changed by the value specified in the Outer-Tag Priority parameter.
VLA cmEgressOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.32.1.4	VlanPriority	read-write	This object defines the new priority bits to be used, it is available only if Outer-Tag PRIOCTL is set to SWAP.
cmPortCpdProfileTable	1.3.6.1.4.1.2544.1.12.4.1.33		not-accessible	A list of entries corresponding to System Control Protocol Disposition V3 profile.
cmPortCpdProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.33.1		not-accessible	A conceptual row in the cmPortCpdProfileTable. These entries represent a Control Protocol Disposition of a port filtering criteria of the System.
I32 cmPortCpdProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.33.1.1	Integer32	read-only	Unique Index value to access the CPD profile row.
STR cmPortCpdProfileName	1.3.6.1.4.1.2544.1.12.4.1.33.1.2	DisplayString	read-write	This object describes the alias of the cpd V3 profile entry.
CMC cmPortCpdProfileCiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.3	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmPortCpdProfileIslDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmPortCpdProfilePagpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmPortCpdProfileUdldDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmPortCpdProfileCdpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmPortCpdProfileVtpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmPortCpdProfileDtpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmPortCpdProfilePvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmPortCpdProfileUplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmPortCpdProfileVlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmPortCpdProfileL2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmPortCpdProfileBridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.14	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmPortCpdProfileBPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmPortCpdProfilePauseDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmPortCpdProfileLACPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmPortCpdProfileLACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmPortCpdProfileEfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmPortCpdProfileSSMDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmPortCpdProfilePortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmPortCpdProfileBridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.22	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmPortCpdProfileLANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.23	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmPortCpdProfileGARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.24	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmPortCpdProfileGMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmPortCpdProfileGVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.26	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22).
CMC cmPortCpdProfileGARPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.27	CmControlProtocolDispType	read-write	Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmPortCpdProfileLldpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP.
STO cmPortCpdProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.33.1.29	StorageType	read-create	The type of storage configured for this entry.
ROW cmPortCpdProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.33.1.30	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmCpdProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmCpdProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmCpdProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
CMC cmPortCpdProfileMac00DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmPortCpdProfileMac01DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmPortCpdProfileMac02DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmPortCpdProfileMac03DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmPortCpdProfileMac04DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmPortCpdProfileMac05DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmPortCpdProfileMac06DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmPortCpdProfileMac07DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmPortCpdProfileMac08DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmPortCpdProfileMac09DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmPortCpdProfileMac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmPortCpdProfileMac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmPortCpdProfileMac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmPortCpdProfileMac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmPortCpdProfileMac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmPortCpdProfileMac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.46	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmPortCpdProfileNearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.47	CmControlProtocolDispType	read-write	The nearest lldp Disposition type.
CMC cmPortCpdProfileNonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.48	CmControlProtocolDispType	read-write	The non tp mr lldp Disposition type.
CMC cmPortCpdProfileCustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.49	CmControlProtocolDispType	read-write	The customer lldp Disposition type.
CMC cmPortCpdProfileELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.50	CmControlProtocolDispType	read-write	The ELMI Disposition type.
cmFlowPointCpdProfileTable	1.3.6.1.4.1.2544.1.12.4.1.34		not-accessible	A list of entries corresponding to System Control Protocol Disposition V3 profile.
cmFlowPointCpdProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.34.1		not-accessible	A conceptual row in the cmFlowPointCpdProfileTable. These entries represent a Control Protocol Disposition of a flow point filtering criteria of the System.
I32 cmFlowPointCpdProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.34.1.1	Integer32	read-only	Unique Index value to access the CPD profile row.
STR cmFlowPointCpdProfileName	1.3.6.1.4.1.2544.1.12.4.1.34.1.2	DisplayString	read-write	This object describes the alias of the cpd V3 profile entry.
CMC cmFlowPointCpdProfileCiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.3	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmFlowPointCpdProfileIslDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmFlowPointCpdProfilePagpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmFlowPointCpdProfileUdldDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmFlowPointCpdProfileCdpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmFlowPointCpdProfileVtpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmFlowPointCpdProfileDtpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmFlowPointCpdProfilePvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmFlowPointCpdProfileUplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmFlowPointCpdProfileVlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmFlowPointCpdProfileL2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmFlowPointCpdProfileBridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.14	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmFlowPointCpdProfileBPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmFlowPointCpdProfilePauseDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmFlowPointCpdProfileLACPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmFlowPointCpdProfileLACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmFlowPointCpdProfileEfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmFlowPointCpdProfileSSMDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmFlowPointCpdProfilePortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmFlowPointCpdProfileBridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.22	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmFlowPointCpdProfileLANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.23	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmFlowPointCpdProfileGARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.24	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmFlowPointCpdProfileGMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmFlowPointCpdProfileGVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.26	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22).
CMC cmFlowPointCpdProfileGARPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.27	CmControlProtocolDispType	read-write	Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmFlowPointCpdProfileLldpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP.
STO cmFlowPointCpdProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.34.1.29	StorageType	read-create	The type of storage configured for this entry.
ROW cmFlowPointCpdProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.34.1.30	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmCpdProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmCpdProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmCpdProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
CMC cmFlowPointCpdProfileMac00DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmFlowPointCpdProfileMac01DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmFlowPointCpdProfileMac02DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmFlowPointCpdProfileMac03DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmFlowPointCpdProfileMac04DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmFlowPointCpdProfileMac05DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmFlowPointCpdProfileMac06DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmFlowPointCpdProfileMac07DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmFlowPointCpdProfileMac08DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmFlowPointCpdProfileMac09DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmFlowPointCpdProfileMac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmFlowPointCpdProfileMac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmFlowPointCpdProfileMac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmFlowPointCpdProfileMac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmFlowPointCpdProfileMac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmFlowPointCpdProfileMac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.46	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmFlowPointCpdProfileNearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.47	CmControlProtocolDispType	read-write	The nearest lldp Disposition type.
CMC cmFlowPointCpdProfileNonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.48	CmControlProtocolDispType	read-write	The non tp mr lldp Disposition type.
CMC cmFlowPointCpdProfileCustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.49	CmControlProtocolDispType	read-write	The customer lldp Disposition type.
CMC cmFlowPointCpdProfileELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.50	CmControlProtocolDispType	read-write	The ELMI Disposition type.
cmEthernetTrafficPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.35		not-accessible	A list of entries corresponding to Ethernet Port CPD for configuration purposes.
cmEthernetTrafficPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.35.1		not-accessible	A conceptual row in the cmEthernetTrafficPortCpdTable.
I32 cmEthernetTrafficPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.35.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
NUM cmEthernetTrafficPortAssociatedCpdProfile	1.3.6.1.4.1.2544.1.12.4.1.35.1.2	VariablePointer	read-write	An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.
cmEthernetFlowPointCpdTable	1.3.6.1.4.1.2544.1.12.4.1.36		not-accessible	A list of entries corresponding to Ethernet Flow Point CPD for configuration purposes.
cmEthernetFlowPointCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.36.1		not-accessible	A conceptual row in the cmEthernetFlowPointCpdTable.
I32 cmEthernetFlowPointCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.36.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
NUM cmEthernetFlowPointAssociatedCpdProfile	1.3.6.1.4.1.2544.1.12.4.1.36.1.2	VariablePointer	read-write	An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.
cmTrafficAclProfileTable	1.3.6.1.4.1.2544.1.12.4.1.37		not-accessible	A list of entries corresponding to the Traffic Profile Rules Entry. It provides upto 4000 Traffic ACL Rules to be configured.
cmTrafficAclProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.37.1		not-accessible	An entry containing information applicable to a system ACL Profile that can be configured.
I32 cmTrafficAclProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.37.1.1	Integer32	read-create	An arbitrary integer index value used to uniquely identify Traffic ACL profile entry.
STR cmTrafficAclProfileName	1.3.6.1.4.1.2544.1.12.4.1.37.1.2	DisplayString	read-write	This object describes the alias of the Acl profile entry.
STO cmTrafficAclProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.37.1.3	StorageType	read-create	The type of storage configured for this entry.
ROW cmTrafficAclProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.37.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficAclProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficAclProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficAclProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmTrafficAclRulesTable	1.3.6.1.4.1.2544.1.12.4.1.38		not-accessible	A list of entries corresponding to the Traffic ACL Rules Entry.
cmTrafficAclRulesEntry	1.3.6.1.4.1.2544.1.12.4.1.38.1		not-accessible	An entry containing information applicable to a system ACL Rules that can be configured.
I32 cmTrafficAclRulesIndex	1.3.6.1.4.1.2544.1.12.4.1.38.1.1	Integer32	read-create	An arbitrary integer index value used to uniquely identify Traffic ACL profile entry. The manager may not assume any particular semantics or meaning to this index, except that it identifies a logical row in the table.
CMT cmTrafficAclFilterAction	1.3.6.1.4.1.2544.1.12.4.1.38.1.2	CmTrafficAclFilterActionType	read-write	Currently, 'permit' and 'deny' are supported.
CMT cmTrafficAclFilterType	1.3.6.1.4.1.2544.1.12.4.1.38.1.3	CmTrafficAclFilterType	read-write	This object describes the Acl filter type.
T/F cmTrafficAclEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.4	TruthValue	read-write	This object enables/disables the Acl entity.
MAC cmTrafficAclSrcMacAddr	1.3.6.1.4.1.2544.1.12.4.1.38.1.5	MacAddress	read-write	The source mac address of Acl entry.
T/F cmTrafficAclSrcMacAddrEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.6	TruthValue	read-write	This object enables/disables source MAC address of Acl entry.
MAC cmTrafficAclDstMacAddr	1.3.6.1.4.1.2544.1.12.4.1.38.1.7	MacAddress	read-write	The destination MAC address of Acl entry.
T/F cmTrafficAclDstMacAddrEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.8	TruthValue	read-write	This object enables/disables destination MAC address of Acl entry.
T/F cmTrafficAclSrcIpFilterEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.9	TruthValue	read-write	This object enable/disable Source IPV4 or IPV6 address filter criteria.
T/F cmTrafficAclDstIpFilterEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.10	TruthValue	read-write	This object enable/disable Destination IPV4 or IPV6 address filter criteria.
IP cmTrafficAclSrcIpV4Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.11	IpAddress	read-write	The source IP address of Acl entry.
IP cmTrafficAclSrcIpV4AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.12	IpAddress	read-write	The source IP mask of Acl entry.
IP cmTrafficAclDstIpV4Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.13	IpAddress	read-write	The destination IP address of Acl entry.
IP cmTrafficAclDstIpV4AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.14	IpAddress	read-write	The destination IP mask of Acl entry.
ADR cmTrafficAclSrcIpV6Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.15	Ipv6Address	read-write	The source IPV6 address of Acl entry.
ADR cmTrafficAclSrcIpV6AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.16	Ipv6Address	read-write	The source IPV6 mask of Acl entry.
ADR cmTrafficAclDstIpV6Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.17	Ipv6Address	read-write	The destination IPV6 address of Acl entry.
ADR cmTrafficAclDstIpV6AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.18	Ipv6Address	read-write	The destination IPV6 mask of Acl entry.
I32 cmTrafficAclTcpUdpSrcPortNum	1.3.6.1.4.1.2544.1.12.4.1.38.1.19	Integer32	read-write	This object describes TCP/UDP minimum source port number of Acl entry.
I32 cmTrafficAclTcpUdpSrcPortMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.20	Integer32	read-write	This object describes TCP/UDP maximum source port number of Acl entry.
T/F cmTrafficAclTcpUdpSrcPortEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.21	TruthValue	read-write	This object enables/disables TCP/UDP source port of Acl entry.
I32 cmTrafficAclTcpUdpDstPortNum	1.3.6.1.4.1.2544.1.12.4.1.38.1.22	Integer32	read-write	This object describes TCP/UDP minimum destination port number of Acl entry.
I32 cmTrafficAclTcpUdpDstPortMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.23	Integer32	read-write	This object describes TCP/UDP maximum destination port number of Acl entry.
T/F cmTrafficAclTcpUdpDstPortEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.24	TruthValue	read-write	This object enables/disables TCP/UDP destination port of Acl entry.
CMT cmTrafficAclIpQosType	1.3.6.1.4.1.2544.1.12.4.1.38.1.25	CmTrafficACLPriorityType	read-write	This object describes QosType Acl entry.
I32 cmTrafficAclIpQosValue	1.3.6.1.4.1.2544.1.12.4.1.38.1.26	Integer32	read-write	This object describes QOS value of Acl entry.
T/F cmTrafficAclIpQosTypeEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.27	TruthValue	read-write	This object enables/disables qos type of acl entry.
VLA cmTrafficAclVlanId	1.3.6.1.4.1.2544.1.12.4.1.38.1.28	VlanId	read-write	This object describes the vlan Id of Acl entry.
T/F cmTrafficAclVlanIdEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.29	TruthValue	read-write	This object enables/disables Vlan Id of Acl entry.
I32 cmTrafficAclVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.38.1.30	Integer32	read-write	This object describes the Vlan Priority of Acl entry.
T/F cmTrafficAclVlanPriorityEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.31	TruthValue	read-write	This object enables/disables Vlan Priority of Acl entry.
CMT cmTrafficAclProtocolType	1.3.6.1.4.1.2544.1.12.4.1.38.1.32	CmTrafficAclProtocolType	read-write	This object describes protocol type of Acl entry.
T/F cmTrafficAclProtocolTypeEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.33	TruthValue	read-write	This object enables/disables protocol type of Acl entry.
STO cmTrafficAclStorageType	1.3.6.1.4.1.2544.1.12.4.1.38.1.34	StorageType	read-create	The type of storage configured for this entry.
ROW cmTrafficAclRowStatus	1.3.6.1.4.1.2544.1.12.4.1.38.1.35	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficAclRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficAclRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficAclRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmQosPolicerProfileTable	1.3.6.1.4.1.2544.1.12.4.1.39		not-accessible	A list of entries corresponding to Quality of Service Policer for configuration purposes.
cmQosPolicerProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.39.1		not-accessible	A conceptual row in the cmQosPolicerProfileTable. These entries represent a Quality of Service Policer.
I32 cmQosPolicerProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.39.1.1	Integer32	read-create	This object defines the Policer profile ID. Up to 1000 profiles can be specified per system.
STR cmQosPolicerProfileName	1.3.6.1.4.1.2544.1.12.4.1.39.1.2	DisplayString	read-create	This object defines the alias for this profile
U32 cmQosPolicerProfileCIRLo	1.3.6.1.4.1.2544.1.12.4.1.39.1.3	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the lower 32 bits of the CIR.
U32 cmQosPolicerProfileCIRHi	1.3.6.1.4.1.2544.1.12.4.1.39.1.4	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the upper 32 bits of the CIR.
U32 cmQosPolicerProfileEIRLo	1.3.6.1.4.1.2544.1.12.4.1.39.1.5	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the lower 32 bits of the EIR.
U32 cmQosPolicerProfileEIRHi	1.3.6.1.4.1.2544.1.12.4.1.39.1.6	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the upper 32 bits of the EIR.
I32 cmQosPolicerProfileCBS	1.3.6.1.4.1.2544.1.12.4.1.39.1.7	Integer32	read-create	This object allows specification of the Commited Burst Size (CBS) on Policer Profile.
I32 cmQosPolicerProfileEBS	1.3.6.1.4.1.2544.1.12.4.1.39.1.8	Integer32	read-create	This object allows specification of the Excess Burst Size (EBS) on the Policer Profile.
POL cmQosPolicerProfileColorMode	1.3.6.1.4.1.2544.1.12.4.1.39.1.9	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F cmQosPolicerProfileCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.39.1.10	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
STO cmQosPolicerProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.39.1.11	StorageType	read-create	The type of storage configured for this entry.
ROW cmQosPolicerProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.39.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosPolicerProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosPolicerProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosPolicerProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmQosQueueProfileTable	1.3.6.1.4.1.2544.1.12.4.1.40		not-accessible	A list of entries corresponding to Quality of Service Queue for configuration purposes.
cmQosQueueProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.40.1		not-accessible	A conceptual row in the cmQosQueueProfileTable. These entries represent a Quality of Service Queue.
I32 cmQosQueueProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.40.1.1	Integer32	read-create	This object defines the Queue profile ID. Up to 64 profiles can be specified per system.
STR cmQosQueueProfileName	1.3.6.1.4.1.2544.1.12.4.1.40.1.2	DisplayString	read-create	This object defines the alias for this profile
I32 cmQosQueueProfileBufferSize	1.3.6.1.4.1.2544.1.12.4.1.40.1.3	Integer32	read-create	This object defines the buffer size of the selected queues.
T/F cmQosQueueProfileREDEnabled	1.3.6.1.4.1.2544.1.12.4.1.40.1.4	TruthValue	read-create	This object defines whether the WRED is enabled as congestion algorithm or not. If disabled, then the following RED parameters (cmQueueProfileWREDDp0MinTh, cmQueueProfileWREDDp0MaxTh and cmQueueProfileWREDDp0MaxProb) must not be specified.
STO cmQosQueueProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.40.1.5	StorageType	read-create	The type of storage configured for this entry.
ROW cmQosQueueProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.40.1.6	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosQueueProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosQueueProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosQueueProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmQosPolicerV2Table	1.3.6.1.4.1.2544.1.12.4.1.41		not-accessible	A list of entries corresponding to Quality of Service Policer for configuration purposes.
cmQosPolicerV2Entry	1.3.6.1.4.1.2544.1.12.4.1.41.1		not-accessible	A conceptual row in the cmQosPolicerV2Table. These entries represent a Quality of Service Policer.
I32 cmQosPolicerV2Index	1.3.6.1.4.1.2544.1.12.4.1.41.1.1	Integer32	read-create	The Policer Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
ADM cmQosPolicerV2AdminState	1.3.6.1.4.1.2544.1.12.4.1.41.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Policer.
OPE cmQosPolicerV2OperationalState	1.3.6.1.4.1.2544.1.12.4.1.41.1.3	OperationalState	read-only	This object represents the Operational State of the QOS Policer.
SEC cmQosPolicerV2SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.41.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS Policer.
T/F cmQosPolicerV2ColorMarkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.41.1.5	TruthValue	read-only	This object indicates the colorMarking state of the QOS Policer.
NUM cmQosPolicerV2AssociatedProfile	1.3.6.1.4.1.2544.1.12.4.1.41.1.6	VariablePointer	read-create	This object define the queue profile ID to be used, it is associated with the cmQosPolicerProfileIndex.
STO cmQosPolicerV2StorageType	1.3.6.1.4.1.2544.1.12.4.1.41.1.7	StorageType	read-create	The type of storage configured for this entry.
ROW cmQosPolicerV2RowStatus	1.3.6.1.4.1.2544.1.12.4.1.41.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosPolicerV2RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosPolicerV2RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosPolicerV2RowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F cmQosPolicerV2PolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.41.1.9	TruthValue	read-write	Whether enable or disable the functionality of policing for this COS.
cmQosShaperV2Table	1.3.6.1.4.1.2544.1.12.4.1.42		not-accessible	A list of entries corresponding to Quality of Service ShaperV2 for configuration purposes.
cmQosShaperV2Entry	1.3.6.1.4.1.2544.1.12.4.1.42.1		not-accessible	A conceptual row in the cmQosShaperV2Table. These entries represent a Quality of Service Shaper.
I32 cmQosShaperV2Index	1.3.6.1.4.1.2544.1.12.4.1.42.1.1	Integer32	read-create	The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
ADM cmQosShaperV2AdminState	1.3.6.1.4.1.2544.1.12.4.1.42.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
OPE cmQosShaperV2OperationalState	1.3.6.1.4.1.2544.1.12.4.1.42.1.3	OperationalState	read-only	This object represents the Operational State of the QOS ShaperV2.
SEC cmQosShaperV2SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.42.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS QosShaperV2.
NUM cmQosShaperV2AssociatedQueueProfile	1.3.6.1.4.1.2544.1.12.4.1.42.1.5	VariablePointer	read-create	This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex.
U32 cmQosShaperV2CIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.6	Unsigned32	read-write	This object specifies the Lower 32 bits of CIR.
U32 cmQosShaperV2CIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.7	Unsigned32	read-write	This object specifies the Higher 32 bits of CIR.
U32 cmQosShaperV2EIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.8	Unsigned32	read-write	This object specifies the Lower 32 bits of EIR.
U32 cmQosShaperV2EIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.9	Unsigned32	read-write	This object specifies the Higher 32 bits of EIR.
I32 cmQosShaperV2IngressAverageFrameSize	1.3.6.1.4.1.2544.1.12.4.1.42.1.10	Integer32	read-create	This object defines the average frame size for accounting for Meter/Shaping.
STO cmQosShaperV2StorageType	1.3.6.1.4.1.2544.1.12.4.1.42.1.11	StorageType	read-create	The type of storage configured for this entry.
ROW cmQosShaperV2RowStatus	1.3.6.1.4.1.2544.1.12.4.1.42.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosShaperV2RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosShaperV2RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosShaperV2RowStatus object may be modified if the associated instance of this object is equal to active(1).
U32 cmQosShaperV2AdditionalCIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.13	Unsigned32	read-write	This object specifies the Lower 32 bits of additional CIR.
U32 cmQosShaperV2AdditionalCIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.14	Unsigned32	read-write	This object specifies the Higher 32 bits of additional CIR.
I32 cmQosShaperV2WFQWeight	1.3.6.1.4.1.2544.1.12.4.1.42.1.15	Integer32	read-write	Weight of queue to be scheduled by WFQ mechanism.
C64 cmQosShaperV2ActualCIR	1.3.6.1.4.1.2544.1.12.4.1.42.1.16	Counter64	read-only	This object specifies the actual CIR.
C64 cmQosShaperV2ActualEIR	1.3.6.1.4.1.2544.1.12.4.1.42.1.17	Counter64	read-only	This object specifies the actual EIR.
T/F cmQosShaperV2LowLatencyControl	1.3.6.1.4.1.2544.1.12.4.1.42.1.18	TruthValue	read-write	This object specifies low latency control whether enabled.
cmTrafficPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.43		not-accessible	A list of entries corresponding to Quality of Service Shaper for configuration purposes.
cmTrafficPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.43.1		not-accessible	A conceptual row in the cmTrafficPortQosShaperTable. These entries represent a Quality of Service Shaper.
I32 cmTrafficPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.43.1.1	Integer32	read-create	The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
ADM cmTrafficPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.43.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
OPE cmTrafficPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.43.1.3	OperationalState	read-only	This object represents the Operational State of the QOS ShaperV2.
SEC cmTrafficPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.43.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS LagQosShaper.
NUM cmTrafficPortQosShaperAssociatedQueueProfile	1.3.6.1.4.1.2544.1.12.4.1.43.1.5	VariablePointer	read-create	This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex.
I32 cmTrafficPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.43.1.6	Integer32	read-create	This object defines the buffer size of Shaper.
U32 cmTrafficPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.7	Unsigned32	read-create	This object specifies the Lower 32 bits of CIR.
U32 cmTrafficPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.8	Unsigned32	read-create	This object specifies the Higher 32 bits of CIR.
U32 cmTrafficPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.9	Unsigned32	read-create	This object specifies the Lower 32 bits of EIR.
U32 cmTrafficPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.10	Unsigned32	read-create	This object specifies the Higher 32 bits of EIR.
STO cmTrafficPortQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.43.1.11	StorageType	read-create	The type of storage configured for this entry.
ROW cmTrafficPortQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.43.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficPortQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficPortQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficPortQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
I32 cmTrafficPortQosShaperIngressAverageFrameSize	1.3.6.1.4.1.2544.1.12.4.1.43.1.13	Integer32	read-create	This object defines the average frame size for accounting for Meter/Shaping.
U32 cmTrafficPortQosShaperAdditionalCIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.14	Unsigned32	read-create	This object specifies the Lower 32 bits of additional CIR.
U32 cmTrafficPortQosShaperAdditionalCIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.15	Unsigned32	read-create	This object specifies the Higher 32 bits of additional CIR.
I32 cmTrafficPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.43.1.16	Integer32	read-write	This object specifies the wfq weight value of the QoS shaper.
CMA cmTrafficAclRscAllocation	1.3.6.1.4.1.2544.1.12.4.1.44	CmAclConfiguration	read-write	This object is defined to set traffic acl resource allocation. Supported actions are: all-bk-l2(1) - all bank allocated to l2. all-bk-l2-ipv4(2) - all bank allocated to l2/ipv4. two-bk-l2-ipv4(3) - two thirds allocated to l2/ipv4, the left belongs to ipv6. one-bk-l2-ipv4(4) - one thirds allocated to l2/ipv4, the left belongs to ipv6. none-bk-l2-ipv4(5) - all bank allocated to ipv6.
f3NetPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.45		not-accessible	A list of entries corresponding to Ethernet Network Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Network Port is in evpl mode and are relevant for traffic in the access to network direction.
f3NetPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.45.1		not-accessible	A conceptual row in the f3NetPortQosShaperTable. These entries represent a Quality of Service Shaper.
I32 f3NetPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.45.1.1	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper.
TRA f3NetPortQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.45.1.2	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
ADM f3NetPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.45.1.3	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
OPE f3NetPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.45.1.4	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
SEC f3NetPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.45.1.5	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
U32 f3NetPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.6	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 f3NetPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 f3NetPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.8	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.45.1.10	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 f3NetPortQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.45.1.11	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 f3NetPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.45.1.12	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
I32 f3NetPortQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.45.1.13	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
U32 f3NetPortQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.14	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.
U32 f3NetPortQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.15	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.
U32 f3NetPortQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.16	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.17	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.18	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 f3NetPortQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.19	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 f3NetPortQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.45.1.20	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 f3NetPortQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.21	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
U32 f3NetPortQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.22	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 f3NetPortQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.45.1.23	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
I32 f3NetPortQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.45.1.24	Integer32	read-write	This object specifies the average frame size before fragmentation.
I32 f3NetPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.45.1.25	Integer32	read-write	This object specifies the wfq weight value.
f3Usb3GDCNPortTable	1.3.6.1.4.1.2544.1.12.4.1.46		not-accessible	3G DCN Port table. The table contains parameters of 3G USB modem.
f3Usb3GDCNPortEntry	1.3.6.1.4.1.2544.1.12.4.1.46.1		not-accessible	A conceptual row in the f3Usb3GDCNPortTable.
I32 f3Usb3GDCNPortIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, f3Usb3GDCNPortIndex
NUM f3Usb3GDCNPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for G3 DCN Port. An integer index value used to uniquely identify this G3 DCN Port.
PHY f3Usb3GDCNPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM f3Usb3GDCNPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.46.1.4	AdminState	read-write	This object represents the Administrative State of the G3 DCN Port.
OPE f3Usb3GDCNPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.46.1.5	OperationalState	read-only	This object represents the Operational State of the G3 DCN Port.
SEC f3Usb3GDCNPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.46.1.6	SecondaryState	read-only	This object represents the Secondary State of the G3 DCN Port.
STR f3Usb3GDCNPortVendorName	1.3.6.1.4.1.2544.1.12.4.1.46.1.7	DisplayString	read-only	This object provides the Vendor Name of the G3 DCN Port.
STR f3Usb3GDCNPortModel	1.3.6.1.4.1.2544.1.12.4.1.46.1.8	DisplayString	read-only	This object provides the Model of the G3 DCN Port.
STR f3Usb3GDCNPortFSN	1.3.6.1.4.1.2544.1.12.4.1.46.1.9	DisplayString	read-only	This object provides the Factory Serial Number of the G3 DCN Port.
STR f3Usb3GDCNPortIMEI	1.3.6.1.4.1.2544.1.12.4.1.46.1.10	DisplayString	read-only	This object provides the International Mobile Equipment Identity of the G3 DCN Port.
STR f3Usb3GDCNPortHardwareVersion	1.3.6.1.4.1.2544.1.12.4.1.46.1.11	DisplayString	read-only	This object provides the Hardware Version of the G3 DCN Port.
STR f3Usb3GDCNPortFirmwareVersion	1.3.6.1.4.1.2544.1.12.4.1.46.1.12	DisplayString	read-only	This object provides the Firmware Version of the G3 DCN Port..
F3U f3Usb3GDCNPortSIMStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.13	F3Usb3GSimCardState	read-only	This object provides the SIM card Status of the G3 DCN Port.
I32 f3Usb3GDCNPortPINLeftChances	1.3.6.1.4.1.2544.1.12.4.1.46.1.14	Integer32	read-only	This object provides the Left Chances for PIN input of the G3 DCN Port.
I32 f3Usb3GDCNPortPUKLeftChances	1.3.6.1.4.1.2544.1.12.4.1.46.1.15	Integer32	read-only	This object provides the Left Chances for PUK input of the G3 DCN Port.
F3U f3Usb3GDCNPortConnectionStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.16	F3Usb3GNetworkConnectionState	read-only	This object provides the Wirless Connection Status of the G3 DCN Port.
F3U f3Usb3GDCNPortRSSI	1.3.6.1.4.1.2544.1.12.4.1.46.1.17	F3Usb3GRecvSignalStrengthInd	read-only	This object provides the Received Signal Strength Indication of the G3 DCN Port.
I32 f3Usb3GDCNPortSpeed	1.3.6.1.4.1.2544.1.12.4.1.46.1.18	Integer32	read-only	This object provides the Connection Speed of the G3 DCN Port.
I32 f3Usb3GDCNPortMTU	1.3.6.1.4.1.2544.1.12.4.1.46.1.19	Integer32	read-only	This object provides the MTU of the G3 DCN Port.
STR f3Usb3GDCNPortProviderName	1.3.6.1.4.1.2544.1.12.4.1.46.1.20	DisplayString	read-only	This object provides the Wireless Service Provider Name of the G3 DCN Port.
IP f3Usb3GDCNPortDNS1	1.3.6.1.4.1.2544.1.12.4.1.46.1.21	IpAddress	read-only	This first DNS of the interface.
IP f3Usb3GDCNPortDNS2	1.3.6.1.4.1.2544.1.12.4.1.46.1.22	IpAddress	read-only	This second DNS of the interface.
STR f3Usb3GDCNPortAPN	1.3.6.1.4.1.2544.1.12.4.1.46.1.23	DisplayString	read-write	This object allows configure the Access Point Name of the G3 DCN Port.
STR f3Usb3GDCNPortUserName	1.3.6.1.4.1.2544.1.12.4.1.46.1.24	DisplayString	read-write	This object allows configure the User Name of the G3 DCN Port.
STR f3Usb3GDCNPortPassword	1.3.6.1.4.1.2544.1.12.4.1.46.1.25	DisplayString	read-write	This object allows configure the Password of the G3 DCN Port.
STR f3Usb3GDCNPortDailNumber	1.3.6.1.4.1.2544.1.12.4.1.46.1.26	DisplayString	read-write	This object allows configure the Dail Number of the G3 DCN Port.
I32 f3Usb3GDCNPortRedialTimer	1.3.6.1.4.1.2544.1.12.4.1.46.1.27	Integer32	read-write	This object allows configure the Retail Timer of the G3 DCN Port.
STR f3Usb3GDCNPortCurrentPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.28	DisplayString	read-create	This object is the Current Pin Code.
STR f3Usb3GDCNPortNewPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.29	DisplayString	read-create	This object is the New Pin code.
STR f3Usb3GDCNPortConfirmPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.30	DisplayString	read-create	This object is the Confirm Pin Code.
STR f3Usb3GDCNPortCurrentPukCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.31	DisplayString	read-create	This object is the Current Puk Code.
F3U f3Usb3GDCNPINCodeAction	1.3.6.1.4.1.2544.1.12.4.1.46.1.32	F3Usb3GDCNPINCodeActionType	read-create	This Action is for PIN code operation.
STO f3Usb3GDCNPortStorageType	1.3.6.1.4.1.2544.1.12.4.1.46.1.33	StorageType	read-create	The type of storage configured for this entry.
ROW f3Usb3GDCNPortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.34	RowStatus	read-write	The status of this row. The f3Usb3GDCNPortRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
STR f3Usb3GDCNPortIMSI	1.3.6.1.4.1.2544.1.12.4.1.46.1.35	DisplayString	read-only	This object provides the International Mobile Subscriber Identity of the G3 DCN Port.
G3A f3Usb3GDCNPortPINStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.36	G3AuthStatus	read-only	This status of PIN/PUK
USB f3UsbDCNPortMobileNetworkType	1.3.6.1.4.1.2544.1.12.4.1.46.1.37	UsbDCNMobileNetworkType	read-only	This object describe the mobile network type.
USB f3Usb3GDCNMuxOperationalMode	1.3.6.1.4.1.2544.1.12.4.1.46.1.38	UsbOperationalMode	read-write	This object describe the USB operatioan mode.
IP f3Usb3GDCNPortIpAddress	1.3.6.1.4.1.2544.1.12.4.1.46.1.39	IpAddress	read-only	The IP address of this port.
IP f3Usb3GDCNPortNetMask	1.3.6.1.4.1.2544.1.12.4.1.46.1.40	IpAddress	read-only	The IP subnet mask of this port.
ocnStmTable	1.3.6.1.4.1.2544.1.12.4.1.47		not-accessible	A list of entries corresponding to OCn/STM interface.
ocnStmEntry	1.3.6.1.4.1.2544.1.12.4.1.47.1		not-accessible	A conceptual row in the ocnStmTable.
I32 ocnStmIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.1	Integer32	not-accessible	Unique index value associated with the OCn/STM interface.
NUM ocnStmIfIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn/STM interface. An integer index value used to uniquely identify this OCn/STM interface.
PHY ocnStmEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this OCn/STM interface.
ADM ocnStmAdminState	1.3.6.1.4.1.2544.1.12.4.1.47.1.4	AdminState	read-write	This object represents the Administrative State of the OCn/STM interface.
OPE ocnStmOperationalState	1.3.6.1.4.1.2544.1.12.4.1.47.1.5	OperationalState	read-only	This object represents the Operational State of the OCn/STM interface.
SEC ocnStmSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.47.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn/STM interface.
STR ocnStmSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.47.1.7	DisplayString	read-only	This object provides the vendor name of the SFP.
STR ocnStmSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.47.1.8	DisplayString	read-only	This object provides the part number of the SFP.
STR ocnStmSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.47.1.9	DisplayString	read-only	This object provides the serial number of the SFP.
DAT ocnStmSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.47.1.10	DateAndTime	read-only	This object provides the date of manufacture of the SFP.
SFP ocnStmSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.47.1.11	SfpConnectorValue	read-only	This object provides the SFP connector value.
I32 ocnStmSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.47.1.12	Integer32	read-only	This object provides the SFP Link Length.
I32 ocnStmSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.47.1.13	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters.
U32 ocnStmSfpLaserWaveLengthPicometer	1.3.6.1.4.1.2544.1.12.4.1.47.1.14	Unsigned32	read-only	This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then ocnStmSfpLaserWaveLength=1510 and ocnStmSfpLaserWaveLengthPicometer=10.
SFP ocnStmSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.47.1.15	SfpMediaType	read-only	This object provides the SFP Media Type.
MUL ocnStmMultiplexingStructures	1.3.6.1.4.1.2544.1.12.4.1.47.1.16	MultiplexingStructure	read-write	This object provides the TDM Multiplexing Structure base on OCn/STM interface.
EOT ocnStmEoTDMMode	1.3.6.1.4.1.2544.1.12.4.1.47.1.17	EoTDMMode	read-write	This object provides the TDM Mode base on OCn/STM interface. EoPDH means VCG container is PDH; EoTDM means VCG container is VC of SDH/SONET
CML ocnStmLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.47.1.18	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn/STM interface.
CML ocnStmLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.47.1.19	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn/STM interface.
I32 ocnStmLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.47.1.20	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn/STM interface.
T/F ocnStmInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.47.1.21	TruthValue	read-write	This object allows to insert AIS-L out from OCn/STM interface when it is in maintenance state.
BIT ocnStmBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.47.1.22	BitErrRate	read-write	This object provide the threshold of B2EXC.
BIT ocnStmBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.47.1.23	BitErrRate	read-write	This object provides the threshold of B2DEG.
STR ocnStmRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.24	DisplayString	read-only	This object provides the recevied J0 on the OCn/STM interface.
STR ocnStmTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.25	DisplayString	read-write	This object provides the transmit J0 on the OCn/STM interface.
STR ocnStmExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.26	DisplayString	read-write	This object provides the expected J0 on the OCn/STM interface.
TRA ocnStmTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.47.1.27	TrailTraceFormat	read-write	This object provides the J0 length mode on the OCn/STM interface.
T/F ocnStmQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.47.1.28	TruthValue	read-write	This object allows to specify whether the OCn/STM interface can be enabled/disabled for QL Mode. This object is only applicable for Synchronous OCn/STM interface, when ocnStmQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM ocnStmExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.29	SSMQualityLevel	read-write	This object allows to specify the expected QL when the OCn/STM interface is enabled for QL Mode. This object is only applicable for Synchronous OCn/STM interface, when ocnStmQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
SSM ocnStmAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.30	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the OCn/STM interface. This object is only applicable for Synchronous OCn/STM interface. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port TransmitQL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM ocnStmReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.31	SSMQualityLevel	read-only	This object provides the Received QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous OCn/STM interface.
SSM ocnStmTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.32	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous OCn/STM interface.
OCN ocnStmPortType	1.3.6.1.4.1.2544.1.12.4.1.47.1.33	OCNSTMPortType	read-only	This object represents the OCN/STM Port Type. Determines whether the OCN/STM port operates in OC or STM mode.
TDM ocnStmFreqSourceType	1.3.6.1.4.1.2544.1.12.4.1.47.1.34	TDMFrequencySourceType	read-write	This object represents the TDM Frequency source of OCN/STM port.
TDM ocnStmHighOrderPathType	1.3.6.1.4.1.2544.1.12.4.1.47.1.35	TDMPathType	read-write	This object provides the High Order Path Type of the OCn/STM interface.
STR ocnStmSfpName	1.3.6.1.4.1.2544.1.12.4.1.47.1.36	DisplayString	read-only	This object provides the official name of the SFP.
STR ocnStmSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.47.1.37	DisplayString	read-only	This object provides the hardware revision of the SFP.
stsVcPathTable	1.3.6.1.4.1.2544.1.12.4.1.48		not-accessible	A list of entries corresponding to OCn Path.
stsVcPathEntry	1.3.6.1.4.1.2544.1.12.4.1.48.1		not-accessible	A conceptual row in the stsVcPathTable.
NUM stsVcPathParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex. Based on the Multiplexing hierarchy, this object points to the container's interface index.
U32 stsVcPathIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.2	Unsigned32	not-accessible	This object is his index.
NUM stsVcPathIfIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn Path. An integer index value used to uniquely identify this OCn Path interface.
ADM stsVcPathAdminState	1.3.6.1.4.1.2544.1.12.4.1.48.1.4	AdminState	read-write	This object represents the Administrative State of the OCn Path.
OPE stsVcPathOperationalState	1.3.6.1.4.1.2544.1.12.4.1.48.1.5	OperationalState	read-only	This object represents the Operational State of the OCn Path.
SEC stsVcPathSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.48.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn Path.
CML stsVcPathLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.48.1.7	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn Path.
CML stsVcPathLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.48.1.8	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn Path.
I32 stsVcPathLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.48.1.9	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn Path.
T/F stsVcPathInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.48.1.10	TruthValue	read-write	This object allows to insert AIS-P out from OCn Path when it is in maintenance state.
BIT stsVcPathBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.48.1.11	BitErrRate	read-write	This object provide the threshold of B3EXC.
BIT stsVcPathBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.48.1.12	BitErrRate	read-write	This object provides the threshold of B3DEG.
TRA stsVcPathTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.48.1.13	TrailTraceFormat	read-write	This object provides the J1 length mode on the OCn Path.
STR stsVcPathRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.14	DisplayString	read-only	This object provides the recevied J1 on the OCn Path.
STR stsVcPathTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.15	DisplayString	read-write	This object provides the transmit J1 on the OCn Path.
STR stsVcPathExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.16	DisplayString	read-write	This object provides the expected J1 on the OCn Path.
U32 stsVcPathRxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.17	Unsigned32	read-only	This object provides the recevied C2 on the OCn Path.
U32 stsVcPathTxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.18	Unsigned32	read-write	This object provides the transmit C2 on the OCn Path.
U32 stsVcPathExpectedSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.19	Unsigned32	read-write	This object provides the expected C2 on the OCn Path.
ROW stsVcPathRowStatus	1.3.6.1.4.1.2544.1.12.4.1.48.1.20	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stsVcPathRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stsVcPathRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stsVcPathRowStatus object may be modified if the associated instance of this object is equal to active(1).
TDM stsVcPathLowOrderPathType	1.3.6.1.4.1.2544.1.12.4.1.48.1.21	TDMPathType	read-write	This object provides the low Order Path Type of the sts vc interface.
vtVcPathTable	1.3.6.1.4.1.2544.1.12.4.1.49		not-accessible	A list of entries corresponding to VT1.5/VC12. These represent the lower order path (LOP) entities.
vtVcPathEntry	1.3.6.1.4.1.2544.1.12.4.1.49.1		not-accessible	A conceptual row in the vtVcPathTable.
NUM vtVcPathParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex.
U32 vtVcPathIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.2	Unsigned32	not-accessible	This object represents the unique number of the Path within the parent container represented by vtvcPathParentIfIndex.
NUM vtVcPathIfIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn VT1.5/VC12. An integer index value used to uniquely identify this OCn VT1.5/VC12 interface.
ADM vtVcPathAdminState	1.3.6.1.4.1.2544.1.12.4.1.49.1.4	AdminState	read-write	This object represents the Administrative State of the OCn VT1.5/VC12.
OPE vtVcPathOperationalState	1.3.6.1.4.1.2544.1.12.4.1.49.1.5	OperationalState	read-only	This object represents the Operational State of the OCn VT1.5/VC12.
SEC vtVcPathSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.49.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn VT1.5/VC12.
CML vtVcPathLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.49.1.7	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn VT1.5/VC12.
CML vtVcPathLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.49.1.8	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn VT1.5/VC12.
I32 vtVcPathLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.49.1.9	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn VT1.5/VC12.
T/F vtVcPathInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.49.1.10	TruthValue	read-write	This object allows to insert AIS-P out from OCn VT1.5/VC12 when it is in maintenance state.
BIT vtVcPathBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.49.1.11	BitErrRate	read-write	This object provide the threshold of BEREXC.
BIT vtVcPathBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.49.1.12	BitErrRate	read-write	This object provides the threshold of BERDEG.
TRA vtVcPathTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.49.1.13	TrailTraceFormat	read-only	This object provides the J2 length mode on the OCn VT1.5/VC12.
STR vtVcPathRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.14	DisplayString	read-only	This object provides the recevied J2 on the OCn VT1.5/VC12.
STR vtVcPathTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.15	DisplayString	read-write	This object provides the transmit J2 on the OCn VT1.5/VC12.
STR vtVcPathExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.16	DisplayString	read-write	This object provides the expected J2 on the OCn VT1.5/VC12.
U32 vtVcPathRxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.17	Unsigned32	read-only	This object provides the recevied V5 byte(b5-b7) on the OCn VT1.5/VC12.
U32 vtVcPathTxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.18	Unsigned32	read-write	This object provides the transmit V5 byte(b5-b7) on the OCn VT1.5/VC12.
U32 vtVcPathExpectedSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.19	Unsigned32	read-write	This object provides the expected V5 byte(b5-b7) on the OCn VT1.5/VC12.
ROW vtVcPathRowStatus	1.3.6.1.4.1.2544.1.12.4.1.49.1.20	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of vtVcPathRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with vtVcPathRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The vtVcPathRowStatus object may be modified if the associated instance of this object is equal to active(1).
e1t1Table	1.3.6.1.4.1.2544.1.12.4.1.50		not-accessible	A list of entries corresponding to E1/T1.
e1t1Entry	1.3.6.1.4.1.2544.1.12.4.1.50.1		not-accessible	A conceptual row in the e1t1Table.
NUM e1t1ParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.1	InterfaceIndex	not-accessible	This object represents the parent (container) object's interface index. In the case when parent of E1T1Entry does not have a InterfaceIndex then the e1t1ParentIfIndex shall have the value of 2147483647, e.g. if parent of E1T1Entry is a card represented in pseudoWireE1T1CardTable.
U32 e1t1Index	1.3.6.1.4.1.2544.1.12.4.1.50.1.2	Unsigned32	not-accessible	Index value used to uniquely identify this E1/T1 interface, within the parent container specified by e1t1ParentIfIndex.
NUM e1t1IfIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for E1/T1. An integer index value used to uniquely identify this E1/T1 interface.
PHY e1t1EntityIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM e1t1AdminState	1.3.6.1.4.1.2544.1.12.4.1.50.1.5	AdminState	read-write	This object represents the Administrative State of the E1/T1.
OPE e1t1OperationalState	1.3.6.1.4.1.2544.1.12.4.1.50.1.6	OperationalState	read-only	This object represents the Operational State of the E1/T1.
SEC e1t1SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.50.1.7	SecondaryState	read-only	This object represents the Secondary State of the E1/T1.
CML e1t1LoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.50.1.8	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the E1/T1.
CML e1t1LoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.50.1.9	CmLoopbackType	read-only	This object provides status of the current loopback on the E1/T1.
I32 e1t1LoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.50.1.10	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the E1/T1.
T/F e1t1RemoteLoopbackRequest	1.3.6.1.4.1.2544.1.12.4.1.50.1.11	TruthValue	read-write	This object allows to specify to repond the remote loopback request or not.
T/F e1t1InsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.50.1.12	TruthValue	read-write	This object allows to insert AIS out from E1/T1 when it is in maintenance state.
ROW e1t1RowStatus	1.3.6.1.4.1.2544.1.12.4.1.50.1.13	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of e1t1RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with e1t1RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The e1t1RowStatus object may be modified if the associated instance of this object is equal to active(1).
E1T e1t1LineType	1.3.6.1.4.1.2544.1.12.4.1.50.1.14	E1T1LineType	read-only	This object represents the E1/T1 Line Type. Determines whether the E1/T1 interface operates in T1 or E1 mode.
E1T e1t1LineCode	1.3.6.1.4.1.2544.1.12.4.1.50.1.15	E1T1LineCode	read-write	This object represents the E1/T1 Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the port is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3.
E1T e1t1FrameFormat	1.3.6.1.4.1.2544.1.12.4.1.50.1.16	E1T1FrameFormat	read-write	This object represents the E1/T1 Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf, t1-esf and t1-unframed and the default value is t1-unframed. When the port is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. R5.4CC supports only t1-unframed for T1 Line type.
LIN e1t1LineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.50.1.17	LineBuildOut	read-write	This object represents Line Build Out on E1/T1 port.
NUM e1t1TimingDomain	1.3.6.1.4.1.2544.1.12.4.1.50.1.18	VariablePointer	read-write	This object represents Timing Domain that the E1/T1 interface uses as timing source. The Timing Domain is a Synchronization Entity represented by an object in the f3SyncTable
E1T e1t1RcvSensitivity	1.3.6.1.4.1.2544.1.12.4.1.50.1.19	E1T1RcvSensitivity	read-write	This object allows configuring the reciever sensitivity based on expected signal strength
NUM e1t1IdlePatternProfile	1.3.6.1.4.1.2544.1.12.4.1.50.1.20	VariablePointer	read-write	This object allows selecting Idle Pattern Profile for the E1/T1 interface. Idle Patter Profile is represented by an object in the f3Pwe3IdlePatternProfileTable
NUM e1t1LoopbackProfile	1.3.6.1.4.1.2544.1.12.4.1.50.1.21	VariablePointer	read-write	This object allows selecting Loopback Profile for the E1/T1 interface. Loopback Profile is represented by an object in the f3Pwe3LoopbackProfileTable
NUM e1t1RelatedContainerId	1.3.6.1.4.1.2544.1.12.4.1.50.1.22	VariablePointer	read-only	This object describes the related container VCG.
T/F e1t1PatternLpbkControl	1.3.6.1.4.1.2544.1.12.4.1.50.1.23	TruthValue	read-write	This object allows to enable or disable Pattern Loopback on a E1 port.
e3t3Table	1.3.6.1.4.1.2544.1.12.4.1.51		not-accessible	A list of entries corresponding to E3/T3.
e3t3Entry	1.3.6.1.4.1.2544.1.12.4.1.51.1		not-accessible	A conceptual row in the e3t3Table.
NUM e3t3ParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex.
U32 e3t3Index	1.3.6.1.4.1.2544.1.12.4.1.51.1.2	Unsigned32	not-accessible	This object is his index.
NUM e3t3IfIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for E3/T3. An integer index value used to uniquely identify this E3/T3 interface.
PHY e3t3EntityIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM e3t3AdminState	1.3.6.1.4.1.2544.1.12.4.1.51.1.5	AdminState	read-write	This object represents the Administrative State of the E3/T3.
OPE e3t3OperationalState	1.3.6.1.4.1.2544.1.12.4.1.51.1.6	OperationalState	read-only	This object represents the Operational State of the E3/T3.
SEC e3t3SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.51.1.7	SecondaryState	read-only	This object represents the Secondary State of the E3/T3.
CML e3t3LoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.51.1.8	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the E3/T3.
CML e3t3LoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.51.1.9	CmLoopbackType	read-only	This object provides status of the current loopback on the E3/T3.
I32 e3t3LoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.51.1.10	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the E3/T3.
T/F e3t3RemoteLoopbackRequest	1.3.6.1.4.1.2544.1.12.4.1.51.1.11	TruthValue	read-write	This object allows to specify to repond the remote loopback request or not.
T/F e3t3InsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.51.1.12	TruthValue	read-write	This object allows to insert AIS out from E3/T3 when it is in maintenance state.
T/F e3t3CBitEnable	1.3.6.1.4.1.2544.1.12.4.1.51.1.13	TruthValue	read-write	The object provides whether C-Bit Parity is enabled/disabled.
T/F e3t3T3Channelized	1.3.6.1.4.1.2544.1.12.4.1.51.1.14	TruthValue	read-write	The object provides whether the T3 tunnel is channlized with T1.
ROW e3t3RowStatus	1.3.6.1.4.1.2544.1.12.4.1.51.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of e3t3RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with e3t3RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The e3t3RowStatus object may be modified if the associated instance of this object is equal to active(1).
E3T e3t3FrameFormat	1.3.6.1.4.1.2544.1.12.4.1.51.1.16	E3T3FrameFormat	read-write	This object represents the Frame Format of the E3/T3.
NUM e3t3RelatedContainerId	1.3.6.1.4.1.2544.1.12.4.1.51.1.17	VariablePointer	read-only	This object describe the related contained VCG.
cmEthernetTrafficPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.52		not-accessible	A list of entries corresponding to Ethernet Facilities for configuration purposes.
cmEthernetTrafficPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.52.1		not-accessible	A conceptual row in the cmEthernetTrafficPortExtTable.
GFP cmEthernetTrafficPortTDMEncapsulation	1.3.6.1.4.1.2544.1.12.4.1.52.1.1	GFPEncapsulationType	read-write	This object describes the GFP Encapsulation type of the traffic port.
NUM cmEthernetTrafficPortRelatedVCG	1.3.6.1.4.1.2544.1.12.4.1.52.1.2	VariablePointer	read-only	This object describes the related VCG of the traffic port.
T/F cmEthernetTrafficPortMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.3	TruthValue	read-write	Whether multicast packets need be limited on this port.
U32 cmEthernetTrafficPortMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.4	Unsigned32	read-write	The rate limiting for multicast packets per port When cmEthernetTrafficPortMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmEthernetTrafficPortMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.5	Unsigned32	read-write	The rate limiting for multicast packets per port When cmEthernetTrafficPortMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F cmEthernetTrafficPortBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.6	TruthValue	read-write	Whether broadcast packets need be limited per port.
U32 cmEthernetTrafficPortBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.7	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmEthernetTrafficPortBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmEthernetTrafficPortBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.8	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmEthernetTrafficPortBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F cmEthernetTrafficPortCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.9	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
U32 cmEthernetTrafficPortCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.10	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
U32 cmEthernetTrafficPortCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.11	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
NUM cmEthernetTrafficPortRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.52.1.12	VariablePointer	read-write	This object allows to set priority map profile.
f3PulsePerSecondPortTable	1.3.6.1.4.1.2544.1.12.4.1.53		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
f3PulsePerSecondPortEntry	1.3.6.1.4.1.2544.1.12.4.1.53.1		not-accessible	A conceptual row in the f3PulsePerSecondPortTable.
I32 f3PulsePerSecondPortIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
NUM f3PulsePerSecondPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
PHY f3PulsePerSecondPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM f3PulsePerSecondPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.53.1.4	AdminState	read-write	This object represents the Administrative State of the Pulse Per Second Port.
OPE f3PulsePerSecondPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.53.1.5	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
SEC f3PulsePerSecondPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.53.1.6	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
SQU f3PulsePerSecondPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.53.1.7	SquelchControl	read-write	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSM f3PulsePerSecondPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.53.1.8	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the Pulse Per Second port. This value is used when f3PulsePerSecondPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
NUM f3PulsePerSecondPortTODSource	1.3.6.1.4.1.2544.1.12.4.1.53.1.9	VariablePointer	read-write	This object allows to set the Pulse Per Second Source for the Port.
SIG f3PulsePerSecondPortDirection	1.3.6.1.4.1.2544.1.12.4.1.53.1.10	SignalDirectionType	read-write	This object allows specification of the signal type (i.e. input or output).
PPS f3PulsePerSecondPortInputRate	1.3.6.1.4.1.2544.1.12.4.1.53.1.11	PPSInputRate	read-write	This object allows specification of the PPS Input Rate.
I32 f3PulsePerSecondPortDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.53.1.12	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds in 8 nanoseconds steps. For input port, that is with input Signal Direction, the valid values are -5000000 to 5000000. Whereas for output port, the valid values are 0 to 90. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
U32 f3PulsePerSecondPortClockClass	1.3.6.1.4.1.2544.1.12.4.1.53.1.13	Unsigned32	read-only	This object specify PPS port clock class.
U32 f3PulsePerSecondPortClockAccuracy	1.3.6.1.4.1.2544.1.12.4.1.53.1.14	Unsigned32	read-only	This object specify PPS port clock accuracy.
TIM f3PulsePerSecondPortTimeSource	1.3.6.1.4.1.2544.1.12.4.1.53.1.15	TimeSource	read-only	This object specify PPS port time source.
NUM f3PulsePerSecondPortPhyInterfaceType	1.3.6.1.4.1.2544.1.12.4.1.53.1.16	PPSPhyInterfaceType	read-write	This object specify PPS physical interface type.
U32 f3PulsePerSecondPortOutputDelay	1.3.6.1.4.1.2544.1.12.4.1.53.1.17	Unsigned32	read-write	This object allows specification of the PPS Output Delay in nanoseconds. The valid values are 0 to 999999999 in 10 nanoseconds steps. Values which are not multiple of 10 will be automatically rounded up to the next multiple of 10.
U32 f3PulsePerSecondPortWidth	1.3.6.1.4.1.2544.1.12.4.1.53.1.18	Unsigned32	read-write	This object allows specification of the Width of the PPS signal on the PPS Port. The valid values are 0 to 250000 in 1 microsecond unit.
PPS f3PulsePerSecondPortPolarity	1.3.6.1.4.1.2544.1.12.4.1.53.1.19	PpsPolarity	read-write	This object allows specification of the Polarity of the PPS signal on the PPS Port.
PPS f3PulsePerSecondPortImpedance	1.3.6.1.4.1.2544.1.12.4.1.53.1.20	PpsPortImpedanceMode	read-write	This object allows specification of the impedance mode for an input PPS port. It is only an indication and cannot be set for an output PPS Port.
STR f3PulsePerSecondPortAlias	1.3.6.1.4.1.2544.1.12.4.1.53.1.21	DisplayString	read-create	This object allows SNMP management entities to provide an alias to the PPS port.
U32 f3PulsePerSecondPortAssumedClockClass	1.3.6.1.4.1.2544.1.12.4.1.53.1.22	Unsigned32	read-write	This object allows specification of the Assumed Clock Class for an input PPS port. It is only an indication and cannot be set for an output PPS Port.
f3TimeOfDayPortTable	1.3.6.1.4.1.2544.1.12.4.1.55		not-accessible	A list of entries corresponding to Time Of Day Port Facilities.
f3TimeOfDayPortEntry	1.3.6.1.4.1.2544.1.12.4.1.55.1		not-accessible	A conceptual row in the f3TimeOfDayPortTable.
I32 f3TimeOfDayPortIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Time Of Day Port within the card.
NUM f3TimeOfDayPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port.
PHY f3TimeOfDayPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM f3TimeOfDayPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.55.1.4	AdminState	read-write	This object represents the Administrative State of the Time Of Day Port.
OPE f3TimeOfDayPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.55.1.5	OperationalState	read-only	This object represents the Operational State of the Time Of Day Port.
SEC f3TimeOfDayPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.55.1.6	SecondaryState	read-only	This object represents the Secondary State of the Time Of Day Port.
SQU f3TimeOfDayPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.55.1.7	SquelchControl	read-write	This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSM f3TimeOfDayPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.55.1.8	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the Time Of Day port. This value is used when f3TimeOfDayPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
NUM f3TimeOfDayPortTODSource	1.3.6.1.4.1.2544.1.12.4.1.55.1.9	VariablePointer	read-write	This object allows to set the Time Of Day Source for the Port.
TOD f3TimeOfDayPortOutputFormat	1.3.6.1.4.1.2544.1.12.4.1.55.1.10	TODOutputFormat	read-write	This object allows to set the Output Format for the Time Of Day port. The Output Format is used to determine the type of output format of the TOD port.
SIG f3TimeOfDayPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.55.1.11	SignalDirectionType	read-write	This object allows specification of the signal direction type (i.e. input or output).
PPS f3TimeOfDayPortInputRate	1.3.6.1.4.1.2544.1.12.4.1.55.1.12	PPSInputRate	read-write	This object allows specification of the Time Of Day Input Rate.
I32 f3TimeOfDayPortDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.55.1.13	Integer32	read-write	This object allows specification of the TOD external Delay Compensation in nanoseconds. For input port, that is with input Signal Direction, the valid values are -5000000 to 5000000 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
STR f3TimeOfDayPortAlias	1.3.6.1.4.1.2544.1.12.4.1.55.1.14	DisplayString	read-create	This object allows SNMP management entities to provide an alias to the Time Of Day port.
U32 f3TimeOfDayPortAssumedClockClass	1.3.6.1.4.1.2544.1.12.4.1.55.1.15	Unsigned32	read-write	This object allows specification of the Assumed Clock Class for an input TOD port. It is only an indication and cannot be set for an output TOD Port.
cmEthernetNetPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.56		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes.
cmEthernetNetPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.56.1		not-accessible	A conceptual row in the cmEthernetNetPortExtTable.
GFP cmEthernetNetPortTDMEncapsulation	1.3.6.1.4.1.2544.1.12.4.1.56.1.1	GFPEncapsulationType	read-write	This object describes the GFP Encapsulation type of the TDM network port.
NUM cmEthernetNetPortAssociatedTdmEntity	1.3.6.1.4.1.2544.1.12.4.1.56.1.2	VariablePointer	read-write	This object describes the associated working path of TDM network port.
T/F cmEthernetNetPortInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.56.1.3	TruthValue	read-write	This object allows to insert AIS out from TDM network port when it is in maintenance state.
f3GPSReceiverPortTable	1.3.6.1.4.1.2544.1.12.4.1.57		not-accessible	A list of entries corresponding to the GPS Receiver Port Facilities.
f3GPSReceiverPortEntry	1.3.6.1.4.1.2544.1.12.4.1.57.1		not-accessible	A conceptual row in the f3GPSReceiverPortTable.
I32 f3GPSReceiverPortIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this GPS Receiver Port within the card.
NUM f3GPSReceiverPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this GPS Receiver Port.
PHY f3GPSReceiverPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM f3GPSReceiverPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.57.1.4	AdminState	read-write	This object represents the Administrative State of the GPS Receiver Port.
OPE f3GPSReceiverPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.57.1.5	OperationalState	read-only	This object represents the Operational State of the GPS Receiver Port.
SEC f3GPSReceiverPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.57.1.6	SecondaryState	read-only	This object represents the Secondary State of the GPS Receiver Port.
PPS f3GPSReceiverPortPPSGenCondition	1.3.6.1.4.1.2544.1.12.4.1.57.1.7	PPSGenCondition	read-write	This object allows for configuration of the PPS generation condition. PPS is generated when at least one satellite is tracked or when at least three satellites are tracked.
U32 f3GPSReceiverPortAntennaCableLength	1.3.6.1.4.1.2544.1.12.4.1.57.1.8	Unsigned32	read-write	This object allows for configuration of the GPS Antenna cable length in meters. This object is deprecated and replaced by f3GPSReceiverPortAntennaDelayValue.
GPS f3GPSReceiverPortAntennaStatus	1.3.6.1.4.1.2544.1.12.4.1.57.1.9	GPSAntennaStatus	read-only	This object provides the GPS Receiver Port Antenna status.
T/F f3GPSReceiverPortSatellitesUsableFlag	1.3.6.1.4.1.2544.1.12.4.1.57.1.10	TruthValue	read-only	This object provides information on whether the satellites are usable. It is set to TRUE, when ephemeris and health data for at least one satellite is available.
U32 f3GPSReceiverPortNumTrackingSatellites	1.3.6.1.4.1.2544.1.12.4.1.57.1.11	Unsigned32	read-only	This object provides information on the number of tracking satellites.
U32 f3GPSReceiverPortSelfSurveyProgress	1.3.6.1.4.1.2544.1.12.4.1.57.1.12	Unsigned32	read-only	This object provides information on the percentage of fixes collected so far.
T/F f3GPSReceiverPortPPSGeneratedFlag	1.3.6.1.4.1.2544.1.12.4.1.57.1.13	TruthValue	read-only	This object indicates whether there are enough usable satellites to provide accurate PPS output.
CON f3GPSReceiverPortGnssSystem	1.3.6.1.4.1.2544.1.12.4.1.57.1.14	ConstellationType	read-write	This object configure Constellation Type of the GPS Antenna.
INS f3GPSReceiverPortInstallationType	1.3.6.1.4.1.2544.1.12.4.1.57.1.15	InstallationType	read-write	This object configure Installation Type of the GPS Antenna.
DAT f3GPSReceiverPortGnssTOD	1.3.6.1.4.1.2544.1.12.4.1.57.1.16	DateAndTime	read-only	This object provides the last time was executed.
CON f3GPSReceiverPortGnssSystemsBitMap	1.3.6.1.4.1.2544.1.12.4.1.57.1.17	ConstellationTypesBitMap	read-write	This object configures GNSS constellation types supported by a GNSS Receiver Port
STR f3GPSReceiverPortAlias	1.3.6.1.4.1.2544.1.12.4.1.57.1.18	DisplayString	read-create	This object provides an alias to the GPS port
I32 f3GPSReceiverPortAntennaDelayValue	1.3.6.1.4.1.2544.1.12.4.1.57.1.19	Integer32	read-write	This object configures GNSS antenna cable delay used by the GNSS Receiver Port, in units determined by f3GPSReceiverPortAntennaDelayType object.
DEL f3GPSReceiverPortAntennaDelayType	1.3.6.1.4.1.2544.1.12.4.1.57.1.20	DelayOption	read-write	This object configures GNSS antenna cable delay type (units)
U32 f3GPSReceiverPortCNOMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.21	Unsigned32	read-write	This object configures the C/No mask in dB-Hz units, used by the GNSS Receiver Port.
U32 f3GPSReceiverPortElevationMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.22	Unsigned32	read-write	This object configures the elevation mask in degrees, used by the GNSS Receiver Port.
STR f3GPSReceiverPortCoordinateLatitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.23	DisplayString	read-write	This object provides the GNSS Receiver Port coordinate latitude in the following format: N\|Sddd:mm:ss.sss (d=degrees, m=minutes, s=seconds) e.g. N37:22:44.123.
STR f3GPSReceiverPortCoordinateLongitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.24	DisplayString	read-write	This object provides the GNSS Receiver Port coordinate longitude in the following format: E\|Wddd:mm:ss.sss (d=degrees, m=minutes, s=seconds) e.g. E157:53:33.456.
U32 f3GPSReceiverPortCoordinateAltitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.25	Unsigned32	read-only	This object provides the GNSS Receiver Port coordinate altitude in meters.
I32 f3GPSReceiverPortFirmwareUpgradePercent	1.3.6.1.4.1.2544.1.12.4.1.57.1.26	Integer32	read-only	This object describes the firmware upgrade percent value. Note: value 255 means NA.
U32 f3GPSReceiverPortPDOPMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.27	Unsigned32	read-write	This object configures PDOP Mask used by the GNSS Receiver. The mask value is expressed in hundredth of the PDOP definition value and it is rounded to the nearest multiple of hundreds. For instance, a value of 200 means that GNSS Receiver stops collecting data when f3GPSReceiverPortPDOP value exceeds 200.
U32 f3GPSReceiverPortSelfSurveyPeriod	1.3.6.1.4.1.2544.1.12.4.1.57.1.28	Unsigned32	read-write	This object configures the Self Survey Period used by the GNSS Receiver.
U32 f3GPSReceiverPortSatMin1Threshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.29	Unsigned32	read-write	This object configures the first threshold for the minimum of satellites used by the GNSS Receiver. SatMin1 must be stricly greater than SatMin2.
U32 f3GPSReceiverPortSatMin2Threshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.30	Unsigned32	read-write	This object configures the second threshold for the minimum of satellites used by the GNSS Receiver. SatMin1 must be stricly greater than SatMin2.
U32 f3GPSReceiverPortPDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.31	Unsigned32	read-only	This object provides the dimensionless PDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet. The value is expressed in hundredth of the PDOP definition. For instance, a value of 153 means that PDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the maximum range value 4095.
TOG f3GPSReceiverPortSelfSurveyControl	1.3.6.1.4.1.2544.1.12.4.1.57.1.32	ToggleValue	read-write	This object allows to enable or disable the automatic location control. When it is enabled, the location of the equipment is evaluated by GNSS Receiver. When it is disabled the position is given by Coordinate Lattitude, Coordinate Longitude, and Altitude.
STR f3GPSReceiverPortCoordinateStringAltitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.33	DisplayString	read-write	When Self Survey Control is disabled, this object configures the GNSS Receiver Port altitude in meters. The altitude is of the form [+/-]XXXXX[.Y] where XXXXX can be any between -400 and 10000 value and Y allows precision of 1 decimal after the floating point. Note that the sign and .Y are optional. When Self Survey Control is enabled, this object is not configurable and displays the GNSS Receiver Port altitude in meters.
LOC f3GPSReceiverPortLocationMode	1.3.6.1.4.1.2544.1.12.4.1.57.1.34	LocationMode	read-write	This object allows to manage location mode for the GNSS receiver on OSA540X.
TIM f3GPSReceiverPortTimeAdvanceMode	1.3.6.1.4.1.2544.1.12.4.1.57.1.35	TimeAdvanceMode	read-write	This object allows to manage time advance mode for the GNSS on OSA540X.
I32 f3GPSReceiverPortTimeAdvanceValue	1.3.6.1.4.1.2544.1.12.4.1.57.1.36	Integer32	read-write	This object allows to configure time advance value (ns) for the GNSS on OSA540X.
TOG f3GPSReceiverPortForcedAntennaConnected	1.3.6.1.4.1.2544.1.12.4.1.57.1.37	ToggleValue	read-write	This object allows to manage the antenna connected mode on OSA540X.
U32 f3GPSReceiverPortServiceAvailableTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.38	Unsigned32	read-only	This object allows to manage service available time (seconds) for GNSS.
U32 f3GPSReceiverPortServiceUnavailableTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.39	Unsigned32	read-only	This object allows to manage service unavailable time (seconds) for GNSS.
STR f3GPSReceiverPortServiceAvailablePercentage	1.3.6.1.4.1.2544.1.12.4.1.57.1.40	DisplayString	read-only	This object allows to manage service available in percentage [XXX.YY%] for GNSS.
I32 f3GPSReceiverPortAGC	1.3.6.1.4.1.2544.1.12.4.1.57.1.41	Integer32	read-only	This object represents the Automatic Gain Control (AGC) level for the GNSS receiver.
U32 f3GPSReceiverPortSelfSurveyPositionAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.42	Unsigned32	read-write	This object configures the Self Survey Position accuracy threshold (in millimeters) used by the GNSS Receiver.
U32 f3GPSReceiverPortHorizontalAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.43	Unsigned32	read-only	This object represents the horizontal accuracy (in millimeters) of the position fix determined by the GNSS receiver.
U32 f3GPSReceiverPortVerticalAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.44	Unsigned32	read-only	This object represents the vertical accuracy (in millimeters) of the position fix determined by the GNSS receiver.
U32 f3GPSReceiverPortTDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.45	Unsigned32	read-only	This object provides the dimensionless TDOP value calculated by the GNSS Receiver. The value is expressed in hundredth of the TDOP definition. For instance, a value of 153 means that TDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver, the value is shown with the minimum range value 0.
U32 f3GPSReceiverPortHDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.46	Unsigned32	read-only	This object provides the dimensionless HDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet or the receiver is in navigation mode. The value is expressed in hundredth of the HDOP definition. For instance, a value of 153 means that HDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the minimum range value 0.
U32 f3GPSReceiverPortVDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.47	Unsigned32	read-only	This object provides the dimensionless VDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet or the receiver is in navigation mode. The value is expressed in hundredth of the VDOP definition. For instance, a value of 153 means that VDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the minimum range value 0.
U32 f3GPSReceiverPortFailureSuspendTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.48	Unsigned32	read-write	This object represents the Failure Suspend Time for the GNSS receiver.
U32 f3GPSReceiverPortSpoofingPpsThreshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.49	Unsigned32	read-write	This object defines the threshold (in nanoseconds ) for generating PPS spoofing alarm in 5405.
U32 f3GPSReceiverPortSpoofingPpsDifference	1.3.6.1.4.1.2544.1.12.4.1.57.1.50	Unsigned32	read-only	This object provides the calculated PPS difference (in nanoseconds ) provided by default and secondary GNSS receivers in 5405.
U32 f3GPSReceiverPortSpoofingLocationThreshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.51	Unsigned32	read-write	This object defines the threshold (in meters) for generating Location spoofing alarm in 5405.
U32 f3GPSReceiverPortSpoofingLocationDifference	1.3.6.1.4.1.2544.1.12.4.1.57.1.52	Unsigned32	read-only	This object provides the calculated Location difference (in meters) based on position information provided by default and secondary GNSS receivers in 5405.
DYN f3GPSReceiverPortGnssDynamicModel	1.3.6.1.4.1.2544.1.12.4.1.57.1.53	DynamicModelType	read-write	This object defines the dynamic model of GNSS. For example, whether the GNSS receiver is stationary, automotive etc.
cmPethPsePortExtTable	1.3.6.1.4.1.2544.1.12.4.1.58		not-accessible	A list of entries corresponding to PsePortExtEntry.
cmPethPsePortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.58.1		not-accessible	A conceptual row in the cmPethPsePortExtEntry.
I32 cmPethPsePortExtGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.58.1.1	Integer32	not-accessible	This object has the same value with the group index in pethPsePortTalbe.
I32 cmPethPsePortExtIndex	1.3.6.1.4.1.2544.1.12.4.1.58.1.2	Integer32	not-accessible	This object has the same value with the port index in pethPsePortTalbe.
NUM cmPethPsePortExtAssociatedPort	1.3.6.1.4.1.2544.1.12.4.1.58.1.3	VariablePointer	read-write	This object means the oid of associated physical port.
U32 pethPsePortExtPowerConsumption	1.3.6.1.4.1.2544.1.12.4.1.58.1.4	Unsigned32	read-only	This object means the power consumption of each port in mWatts.
PSE pethPsePortExtAvailablePowerLevel	1.3.6.1.4.1.2544.1.12.4.1.58.1.5	PsePowerLevel	read-write	This object means the pse port available power level.
pethMainPseEXTTable	1.3.6.1.4.1.2544.1.12.4.1.59		not-accessible	A list of entries corresponding to PethMainPseEXTEntry.
pethMainPseEXTEntry	1.3.6.1.4.1.2544.1.12.4.1.59.1		not-accessible	A conceptual row in the pethMainPseEXTEntry.
I32 pethMainPseExtGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.59.1.1	Integer32	not-accessible	This object has the same value with the group index in pethMainPseEXTTable.
PSE pethMainPseExtNonStandardPD	1.3.6.1.4.1.2544.1.12.4.1.59.1.2	PSENonStandardPD	read-write	disabled: don't support non-standard PD, enabled: support non-standard PD
cmMPFlowTable	1.3.6.1.4.1.2544.1.12.4.1.60		not-accessible	A list of entries corresponding to MPFlow.
cmMPFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.60.1		not-accessible	A conceptual row in the cmMPFlowTable.
I32 cmMPFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.60.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this MultiPointFlow.
STR cmMPFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.60.1.2	F3DisplayString	read-write	This object allows SNMP management entities to provide a circuit identifier with the MPFlow.
ADM cmMPFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.60.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
OPE cmMPFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.60.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
SEC cmMPFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.60.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
T/F cmMPFlowLearningEnabled	1.3.6.1.4.1.2544.1.12.4.1.60.1.6	TruthValue	read-write	DISABLED: The forwarding function of the Flow does not dynamically learn MAC address to flowpoint mapping. ENABLED: The forwarding function of the Flow dynamically learns MAC address to flowpoint mapping based on ingress flowpoing and source MAC address.
I32 cmMPFlowAgingTimer	1.3.6.1.4.1.2544.1.12.4.1.60.1.7	Integer32	read-write	MAC Table Entry will be removed from the forwarding table after an inactivity time represented by this entry. Not used in EG-X.
NUM cmMPFlowFwdTableSizeProfileID	1.3.6.1.4.1.2544.1.12.4.1.60.1.8	VariablePointer	read-write	Profile ID for Maximum number of MAC Table Entries for the flow
LEA cmMPFlowtableFullAction	1.3.6.1.4.1.2544.1.12.4.1.60.1.9	LearningAction	read-write	Action on ingress frames when the number of MAC Table entires has reached the maximum defined by tableSize. BLOCK: A frame with a Source MAC address not in the MAC Table will be discarded. FORWARD: A frame with a Source MAC address not in the MAC table will not be learned and will be flooded to other flowpoints.
STO cmMPFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.60.1.10	StorageType	read-create	The type of storage configured for this entry.
ROW cmMPFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.60.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMPFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMPFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
LEA cmMPFlowLearningConfigAction	1.3.6.1.4.1.2544.1.12.4.1.60.1.12	LearningConfigAction	read-write	This objects allows performing user action on Learning Table.
STR cmMPFlowFPList	1.3.6.1.4.1.2544.1.12.4.1.60.1.13	F3DisplayString	read-write	This object only used to display trap and Flow point list. Fp will be add in the cmMPFlowMemberTable.
cmMPFlowMemberTable	1.3.6.1.4.1.2544.1.12.4.1.61		not-accessible	A list of entries corresponding to MPFlowMember.
cmMPFlowMemberEntry	1.3.6.1.4.1.2544.1.12.4.1.61.1		not-accessible	A conceptual row in the cmMPFlowMemberTable.
NUM cmMPFlowMemberFPIndex	1.3.6.1.4.1.2544.1.12.4.1.61.1.1	VariablePointer	not-accessible	This object describes the relate Flow point.
ROW cmMPFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.61.1.2	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMPFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMPFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
cmEthernetTrafficPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.62		not-accessible	EthernetTraffic Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the EthernetTraffic port.
cmEthernetTrafficPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.62.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
I32 cmEthernetTrafficPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.62.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
VLA cmEthernetTrafficPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.62.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmEthernetTrafficPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.62.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmEthernetTrafficPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.62.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
cmEthernetTrafficPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.63		not-accessible	EthernetTraffic Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmEthernetTrafficPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.63.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
I32 cmEthernetTrafficPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.63.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
VLA cmEthernetTrafficPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.63.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmEthernetTrafficPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.63.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
T/F cmEthernetTrafficPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.63.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
cmEthernetTrafficPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.64		not-accessible	EthernetTraffic Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmEthernetTrafficPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.64.1		not-accessible	A conceptual row in the cmAccPortPcpDEPairEntry.
I32 cmEthernetTrafficPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.64.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
VLA cmEthernetTrafficPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.64.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmEthernetTrafficPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.64.1.3	VlanPriority	read-write	This object is the drop eligible priority.
cmEthernetTrafficPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.65		not-accessible	A list of entries corresponding to Ethernet Traffic Port Cable Length Benchmark.
cmEthernetTrafficPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.65.1		not-accessible	A conceptual row in the cmEthernetTrafficPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Traffic Port.
I32 cmEthernetTrafficPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.65.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
T/F cmEthernetTrafficPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.65.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
STR cmEthernetTrafficPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.65.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
STR cmEthernetTrafficPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.65.1.4	DisplayString	read-write	A textual string containing description of cable span.
networkElementTMParamsTable	1.3.6.1.4.1.2544.1.12.4.1.66		not-accessible	Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
networkElementTMParamsEntry	1.3.6.1.4.1.2544.1.12.4.1.66.1		not-accessible	A conceptual row in the networkElementTMParamsTable.
BAN neTMParamsBandwidthProfileMode	1.3.6.1.4.1.2544.1.12.4.1.66.1.1	BandwidthProfileMode	read-create	A Network Element level Bandwidth Profile Mode shall be supported which will indicate if the CIR/EIR is interpreted as Information Rate (IR) or Line Rate (LR). In IR mode BWP is enforced based on number of bytes beginning with DA and ending with FCS as it was received at a port which is called the Service Frame in MEF terminology. In LR mode the BWP is enforced based on the whole frame including IFG, Preamble and SFD.
I32 neTMParamsAgingtime	1.3.6.1.4.1.2544.1.12.4.1.66.1.2	Integer32	read-create	The object describe the system aging time.
cmEthernetAccPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.67		not-accessible	A list of entries corresponding to Ethernet Access Port Facilities for JDSU configuration purposes.
cmEthernetAccPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.67.1		not-accessible	A conceptual row in the cmEthernetAccPortJdsuExtTable.
T/F cmEthernetAccPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.67.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
VLA cmEthernetAccPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.67.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
STR cmEthernetAccPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.67.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
cmEthernetNetPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.68		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for JDSU configuration purposes.
cmEthernetNetPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.68.1		not-accessible	A conceptual row in the cmEthernetNetPortJdsuExtTable.
T/F cmEthernetNetPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.68.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
VLA cmEthernetNetPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.68.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
STR cmEthernetNetPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.68.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
cmEthernetTrafficPortLpbkTable	1.3.6.1.4.1.2544.1.12.4.1.69		not-accessible	A list of entries corresponding to Vlan loopback on Ethernet Traffic Port.
cmEthernetTrafficPortLpbkEntry	1.3.6.1.4.1.2544.1.12.4.1.69.1		not-accessible	A conceptual row in the cmEthernetTrafficPortLpbkTable. These entries represent Vlan loopback on the Ethernet Traffic Port.
I32 cmEthernetTrafficPortLpbkIndex	1.3.6.1.4.1.2544.1.12.4.1.69.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this vlan loopback entry.
T/F cmEthernetTrafficPortLpbkInnerVlanEnabled	1.3.6.1.4.1.2544.1.12.4.1.69.1.2	TruthValue	read-write	This object represent the inner vlan whether enabled.
STR cmEthernetTrafficPortLpbkInnerVlanTag	1.3.6.1.4.1.2544.1.12.4.1.69.1.3	DisplayString	read-write	This object represent the inner vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
T/F cmEthernetTrafficPortLpbkOuterVlanEnabled	1.3.6.1.4.1.2544.1.12.4.1.69.1.4	TruthValue	read-write	This object represent the outter vlan whether enabled.
STR cmEthernetTrafficPortLpbkOuterVlanTag	1.3.6.1.4.1.2544.1.12.4.1.69.1.5	DisplayString	read-write	This object represent the outter vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
I32 cmEthernetTrafficPortLpbkTime	1.3.6.1.4.1.2544.1.12.4.1.69.1.6	Integer32	read-write	This object represent the vlan loopback time.
CML cmEthernetTrafficPortLpbkStatus	1.3.6.1.4.1.2544.1.12.4.1.69.1.7	CmLoopbackType	read-only	This object represent the vlan loopback status.
CML cmEthernetTrafficPortLpbkConfig	1.3.6.1.4.1.2544.1.12.4.1.69.1.8	CmLoopbackType	read-write	This object represent the vlan loopback action.
cmPrioMapV2ProfileTable	1.3.6.1.4.1.2544.1.12.4.1.70		not-accessible	A list of entries corresponding to Ethernet Priority Mappings V2 Profile.
cmPrioMapV2ProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.70.1		not-accessible	A conceptual row in the cmPrioMapV2ProfileTable.
I32 cmPrioMapV2ProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.70.1.1	Integer32	not-accessible	The integer index value describes the profile index.
STR cmPrioMapV2ProfileAlias	1.3.6.1.4.1.2544.1.12.4.1.70.1.2	DisplayString	read-write	The integer index value describes the profile alias.
PRI cmPrioMapV2ProfileMapModeType	1.3.6.1.4.1.2544.1.12.4.1.70.1.3	PriorityMapMode	read-write	The integer index value describes the profile PriorityMapMode.
STO cmPrioMapV2ProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.70.1.4	StorageType	read-create	The type of storage configured for this entry.
ROW cmPrioMapV2ProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.70.1.5	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmPrioMapV2ProfileStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmPrioMapV2ProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmPrioMapV2ProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
VLA cmPrioMapV2ProfileIngressCosPriority	1.3.6.1.4.1.2544.1.12.4.1.70.1.6	VlanTagType	read-create	This object is used to specify whether the profile uses the inner-tag or the outer-tag in determining the COS (Class of Service).
COS cmPrioMapV2ProfileCosMapModeType	1.3.6.1.4.1.2544.1.12.4.1.70.1.7	CosMappingMode	read-write	This object is used to specify Cos mapping mode type.
T/F cmPrioMapV2ProfileCosMapControl	1.3.6.1.4.1.2544.1.12.4.1.70.1.8	TruthValue	read-write	This object is used to control whether has cmPrioMapV2PrioMappingCOSTable in profile.
U32 cmPrioMapV2ProfileDefaultCos	1.3.6.1.4.1.2544.1.12.4.1.70.1.9	Unsigned32	read-write	This object is used to specify the Default COS to be used when the Ingress Priority Mapping function does not match.
U32 cmPrioMapV2ProfileEgressCos	1.3.6.1.4.1.2544.1.12.4.1.70.1.10	Unsigned32	read-write	This object is used to specify the Default COS to be used when the Egress Priority Mapping function does not match.
cmPrioMapV2IngressPrioMappingTable	1.3.6.1.4.1.2544.1.12.4.1.71		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
cmPrioMapV2IngressPrioMappingEntry	1.3.6.1.4.1.2544.1.12.4.1.71.1		not-accessible	A conceptual row in the cmPrioMapV2IngressPrioMappingTable.
I32 cmPrioMapV2IngressPrioMappingIndex	1.3.6.1.4.1.2544.1.12.4.1.71.1.1	Integer32	not-accessible	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmPrioMapV2IngressPrioMappingInPriority	1.3.6.1.4.1.2544.1.12.4.1.71.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
I32 cmPrioMapV2IngressPrioMappingCOS	1.3.6.1.4.1.2544.1.12.4.1.71.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
cmPrioMapV2PrioMappingCOSTable	1.3.6.1.4.1.2544.1.12.4.1.72		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
cmPrioMapV2PrioMappingCOSEntry	1.3.6.1.4.1.2544.1.12.4.1.72.1		not-accessible	A conceptual row in the cmPrioMapV2PrioMappingCOSTable.
I32 cmPrioMapV2PrioMappingCOSIndex	1.3.6.1.4.1.2544.1.12.4.1.72.1.1	Integer32	not-accessible	The index of this entry.
I32 cmPrioMapV2PrioMappingCOSValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.2	Integer32	read-only	This allows specification of the COS Value, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmPrioMapV2PrioMappingCOSOuterTagPri	1.3.6.1.4.1.2544.1.12.4.1.72.1.3	Integer32	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority.
I32 cmPrioMapV2PrioMappingCOSInnerTagPri	1.3.6.1.4.1.2544.1.12.4.1.72.1.4	Integer32	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority.
I32 cmPrioMapV2PrioMappingEncapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.72.1.5	Integer32	read-write	This object allows configuring encapsulation outer tag priority value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingEncapInnerTagPriority	1.3.6.1.4.1.2544.1.12.4.1.72.1.6	Integer32	read-write	This object allows configuring encapsulation inner tag priority value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingEncapOuterDscpValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.7	Integer32	read-write	This object allows configuring encapsulation outer DSCP value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingDscpValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.8	Integer32	read-write	This object allows configuring DSCP value of ingress cos mapping.
cmPrioMapV2PrioMappingPriTable	1.3.6.1.4.1.2544.1.12.4.1.73		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
cmPrioMapV2PrioMappingPriEntry	1.3.6.1.4.1.2544.1.12.4.1.73.1		not-accessible	A conceptual row in the cmPrioMapV2PrioMappingPriTable.
I32 cmPrioMapV2PrioMappingPriIndex	1.3.6.1.4.1.2544.1.12.4.1.73.1.1	Integer32	not-accessible	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmPrioMapV2PrioMappingPriInPrio	1.3.6.1.4.1.2544.1.12.4.1.73.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
PRI cmPrioMapV2PrioMappingPriPrioControl	1.3.6.1.4.1.2544.1.12.4.1.73.1.3	PrioMapControlType	read-write	This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapV2XTagPriority.
I32 cmPrioMapV2PrioMappingPriXTagPrio	1.3.6.1.4.1.2544.1.12.4.1.73.1.4	Integer32	read-write	This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapV2XTagControl as 'swap'.
I32 cmPrioMapV2PrioMappingPriCOS	1.3.6.1.4.1.2544.1.12.4.1.73.1.5	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
cmPrioMapV2ProfileAppliedObjTable	1.3.6.1.4.1.2544.1.12.4.1.74		not-accessible	A list of entries corresponding to Ethernet Priority Mappings V2 Profile AppliedObj.
cmPrioMapV2ProfileAppliedObjEntry	1.3.6.1.4.1.2544.1.12.4.1.74.1		not-accessible	A conceptual row in the cmPrioMapV2ProfileAppliedObjTable.
NUM cmPrioMapV2ProfileAppliedObj	1.3.6.1.4.1.2544.1.12.4.1.74.1.1	VariablePointer	read-only	The object describe the profile Applied to. It maybe the access port or network port or flow etc.
cmAccPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.75		not-accessible	A list of entries corresponding to Access Port for configuration purposes.
cmAccPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.75.1		not-accessible	A conceptual row in the cmAccPortExtTable.
T/F cmAccPortExtMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.1	TruthValue	read-write	Whether multicast packets need be limited on this port.
U32 cmAccPortExtMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.2	Unsigned32	read-write	The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmAccPortExtMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.3	Unsigned32	read-write	The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F cmAccPortExtBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.4	TruthValue	read-write	Whether broadcast packets need be limited per port.
U32 cmAccPortExtBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.5	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmAccPortExtBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.6	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F cmAccPortExtCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.7	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
U32 cmAccPortExtCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.8	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
U32 cmAccPortExtCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.9	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
NUM cmAccPortExtRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.75.1.10	VariablePointer	read-write	This object allows to set priority map profile.
cmNetPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.76		not-accessible	A list of entries corresponding to Network Port for configuration purposes.
cmNetPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.76.1		not-accessible	A conceptual row in the cmNetPortExtTable.
T/F cmNetPortExtMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.1	TruthValue	read-write	Whether multicast packets need be limited on this port.
U32 cmNetPortExtMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.2	Unsigned32	read-write	The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmNetPortExtMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.3	Unsigned32	read-write	The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F cmNetPortExtBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.4	TruthValue	read-write	Whether broadcast packets need be limited per port.
U32 cmNetPortExtBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.5	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmNetPortExtBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.6	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
T/F cmNetPortExtCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.7	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
U32 cmNetPortExtCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.8	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
U32 cmNetPortExtCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.9	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
NUM cmNetPortExtRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.76.1.10	VariablePointer	read-write	This object allows to set priority map profile.
f3UsbWIFIDonglePortTable	1.3.6.1.4.1.2544.1.12.4.1.77		not-accessible	A list of entries corresponding to wifi dongle Port for configuration purposes.
f3UsbWIFIDonglePortEntry	1.3.6.1.4.1.2544.1.12.4.1.77.1		not-accessible	A conceptual row in the f3UsbWIFIDonglePortTable.
I32 f3UsbWIFIDonglePortIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.1	Integer32	not-accessible	An integer index value used to uniquely identify WIFI dongle port.
NUM f3UsbWIFIDonglePortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for WIFI dongle Port. An integer index value used to uniquely identify this Port
PHY f3UsbWIFIDonglePortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
ADM f3UsbWIFIDonglePortAdminState	1.3.6.1.4.1.2544.1.12.4.1.77.1.4	AdminState	read-write	This object represents the Administrative State of this Port.
OPE f3UsbWIFIDonglePortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.77.1.5	OperationalState	read-only	This object represents the Operational State of this Port.
SEC f3UsbWIFIDonglePortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.77.1.6	SecondaryState	read-only	This object represents the Secondary State of this Port.
STR f3UsbWIFIDonglePortSSID	1.3.6.1.4.1.2544.1.12.4.1.77.1.7	DisplayString	read-write	This object represents the SSID value of this port.
STR f3UsbWIFIDonglePortPassword	1.3.6.1.4.1.2544.1.12.4.1.77.1.8	DisplayString	read-write	This object represents the password value of this SSID.
WIF f3UsbWIFIDonglePortEncryption	1.3.6.1.4.1.2544.1.12.4.1.77.1.9	WIFIEncryptionType	read-write	The encryption type of this port.
IP f3UsbWIFIDonglePortIPAddress	1.3.6.1.4.1.2544.1.12.4.1.77.1.10	IpAddress	read-write	The IP address of this port.
IP f3UsbWIFIDonglePortwWIFIIPNetMask	1.3.6.1.4.1.2544.1.12.4.1.77.1.11	IpAddress	read-write	The IP address mask of this port.
DHC f3UsbWIFIDonglePortWIFIDHCPRole	1.3.6.1.4.1.2544.1.12.4.1.77.1.12	DHCPType	read-only	The DHCP role type of this port.
IP f3UsbWIFIDonglePortWIFIAllocatedIPFrom	1.3.6.1.4.1.2544.1.12.4.1.77.1.13	IpAddress	read-write	The start IP address could be allocated.
IP f3UsbWIFIDonglePortWIFIAllocatedIPEnd	1.3.6.1.4.1.2544.1.12.4.1.77.1.14	IpAddress	read-write	The last IP address could be allocated.
STO f3UsbWIFIDonglePortStorageType	1.3.6.1.4.1.2544.1.12.4.1.77.1.15	StorageType	read-create	The type of storage configured for this entry.
ROW f3UsbWIFIDonglePortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.77.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3UsbWIFIDonglePortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UsbWIFIDonglePortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3UsbWIFIDonglePortRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
STR f3UsbWIFIDonglePortAccessdUsers	1.3.6.1.4.1.2544.1.12.4.1.77.1.17	DisplayString	read-only	The users list of accessed via WIFI dongle port.
STR f3UsbWIFIDonglePortName	1.3.6.1.4.1.2544.1.12.4.1.77.1.18	DisplayString	read-only	The WIFI dongle port name.
bits8PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.78		not-accessible	A list of entries corresponding to BITS 8 Port Group Facilities for configuration purposes.
bits8PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.78.1		not-accessible	A conceptual row in the bits8PortGroupTable.
I32 bits8PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.78.1.1	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, portIndex, bits8PortGroupIndex.
NUM bits8PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.78.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bits8PortGroupIndex, bits8PortGroupIfIndex.
ADM bits8PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.78.1.3	AdminState	read-write	This object represents the Administrative State of the BITS 8 Port Group.
OPE bits8PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.78.1.4	OperationalState	read-only	This object represents the Operational State of the BITS 8 Port Group.
SEC bits8PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.78.1.5	SecondaryState	read-only	This object represents the Secondary State of the BITS 8 Port Group.
BIT bits8PortGroupLineType	1.3.6.1.4.1.2544.1.12.4.1.78.1.6	BitsPortLineType	read-write	This object represents the BITS 8 Port Group Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode.
BIT bits8PortGroupLineCode	1.3.6.1.4.1.2544.1.12.4.1.78.1.7	BitsPortLineCode	read-write	This object represents the BITS 8 Port Group Line Code. When the group is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the group is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3. When the group is configured for a Line Type of 2048kHz, the value is none.
BIT bits8PortGroupFrameFormat	1.3.6.1.4.1.2544.1.12.4.1.78.1.8	BitsFrameFormat	read-write	This object represents the BITS 8 Port Group Frame Format. When the group is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When the group is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. When the group is configured for a Line Type of 2048kHz, the value is none. R4.1CC and R4.3CC do not support e1-unframed.
SAB bits8PortGroupSaBitDesignation	1.3.6.1.4.1.2544.1.12.4.1.78.1.9	SaBitDesignation	read-write	This object represents the BITS 8 Port Group Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is None. For E1 Line Type, the default value is bit4 and it can only have a value of None if QL Mode is disabled, otherwise, None is an invalid value.
T/F bits8PortGroupQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.78.1.10	TruthValue	read-write	This object allows to specify whether the BITS 8 Port Group can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
SSM bits8PortGroupTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.78.1.11	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the BITS 8 Port Group. If the BITS group's QL Mode is disabled, then the received QL value is not applicable.
SSM bits8PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.78.1.12	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the BITS 8 Port Group. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determine whether or not to squelch the output of the BITS 8 Port Group. If the system's QL is lower than the Squelch QL, the output is squelched. If the BITS group's QL Mode is disabled, then the received QL value is not applicable.
LIN bits8PortGroupLineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.78.1.13	LineBuildOut	read-write	This object allows to manage the line build out on the BITS 8 Port Group when the Line Type is T1.
BIT bits8PortGroupImpedance	1.3.6.1.4.1.2544.1.12.4.1.78.1.14	BitsPortImpedanceMode	read-write	This object provides the line impedance mode for the BITS 8 Port Group.
ROW bits8PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.78.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of bits8PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with bits8PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The bits8PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
POR bits8PortGroupActivePorts	1.3.6.1.4.1.2544.1.12.4.1.78.1.16	PortState	read-write	This object represents the Active State for each port of the BITS 8 Port Group.
POR bits8PortGroupClkIfEnabledPorts	1.3.6.1.4.1.2544.1.12.4.1.78.1.17	PortState	read-write	This object represents the Clock Enabling State for each port of the BITS 8 Port Group.
pps16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.79		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
pps16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.79.1		not-accessible	A conceptual row in the pps16PortGroupTable.
I32 pps16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.79.1.1	Integer32	read-only	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
NUM pps16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.79.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
ADM pps16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.79.1.3	AdminState	read-only	This object represents the Administrative State of the Pulse Per Second Port.
OPE pps16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.79.1.4	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
SEC pps16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.79.1.5	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
STR pps16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.79.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
SQU pps16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.79.1.7	SquelchControl	read-only	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
NUM pps16PortGroupTODSource	1.3.6.1.4.1.2544.1.12.4.1.79.1.8	VariablePointer	read-only	This object allows to set the Pulse Per Second Source for the Port.
SIG pps16PortGroupDirection	1.3.6.1.4.1.2544.1.12.4.1.79.1.9	SignalDirectionType	read-only	This object allows specification of the signal type (i.e. input or output).
I32 pps16PortGroupDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.79.1.10	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
ROW pps16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.79.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pps16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pps16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pps16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
clk16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.80		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
clk16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.80.1		not-accessible	A conceptual row in the clk16PortGroupTable.
I32 clk16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.80.1.1	Integer32	read-only	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
NUM clk16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.80.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
ADM clk16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.80.1.3	AdminState	read-only	This object represents the Administrative State of the Pulse Per Second Port.
OPE clk16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.80.1.4	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
SEC clk16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.80.1.5	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
STR clk16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.80.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
SIG clk16PortGroupDirection	1.3.6.1.4.1.2544.1.12.4.1.80.1.7	SignalDirectionType	read-only	This object allows specification of the signal type (i.e. input or output).
SQU clk16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.80.1.8	SquelchControl	read-only	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSM clk16PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.80.1.9	SSMQualityLevel	read-only	This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
ROW clk16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.80.1.10	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with clk16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
todPps16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.81		not-accessible	A list of entries corresponding to Time Of Day Port Facilities.
todPps16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.81.1		not-accessible	A conceptual row in the todPps16PortGroupTable.
I32 todPps16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.81.1.1	Integer32	read-only	An integer index value used to uniquely identify this Time Of Day Port within the card.
NUM todPps16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.81.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port.
ADM todPps16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.81.1.3	AdminState	read-only	This object represents the Administrative State of the Time Of Day Port.
OPE todPps16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.81.1.4	OperationalState	read-only	This object represents the Operational State of the Time Of Day Port.
SEC todPps16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.81.1.5	SecondaryState	read-only	This object represents the Secondary State of the Time Of Day Port.
STR todPps16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.81.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
SQU todPps16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.81.1.7	SquelchControl	read-only	This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSM todPps16PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.81.1.8	SSMQualityLevel	read-only	This object allows to set the Squelch QL for the Time Of Day port. This value is used when todPps16PortGroupSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
NUM todPps16PortGroupTODSource	1.3.6.1.4.1.2544.1.12.4.1.81.1.9	VariablePointer	read-only	This object allows to set the Time Of Day Source for the Port.
TOD todPps16PortGroupOutputFormat	1.3.6.1.4.1.2544.1.12.4.1.81.1.10	TODOutputFormat	read-only	This object allows to set the Output Format for the Time Of Day port. The Output Format is used to determine the type of output format of the TOD port.
I32 todPps16PortGroupDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.81.1.11	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
ROW todPps16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.81.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with todPps16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3PolicerEnvelopeTable	1.3.6.1.4.1.2544.1.12.4.1.82		not-accessible	A list of entries corresponding to policer envelope for configuration purposes.
f3PolicerEnvelopeEntry	1.3.6.1.4.1.2544.1.12.4.1.82.1		not-accessible	A conceptual row in the f3PolicerEnvelopeTable.
I32 f3PolicerEnvelopeIndex	1.3.6.1.4.1.2544.1.12.4.1.82.1.1	Integer32	not-accessible	An integer index value used to uniquely identify policer envelope.
T/F f3PolicerEnvelopeCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.82.1.2	TruthValue	read-write	This object allows specification of Policer Envelope Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level
STO f3PolicerEnvelopeStorageType	1.3.6.1.4.1.2544.1.12.4.1.82.1.3	StorageType	read-create	The type of storage configured for this entry.
ROW f3PolicerEnvelopeRowStatus	1.3.6.1.4.1.2544.1.12.4.1.82.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PolicerEnvelopeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UsbWIFIDonglePortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PolicerEnvelopeRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
f3EnvelopeAssocPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.83		not-accessible	A list of entries corresponding to Flows which are envelope associated policers instance
f3EnvelopeAssocPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.83.1		not-accessible	A conceptual row in the f3EnvelopeAssocPolicerTable.
NUM f3EnvelopeAssocPolicer	1.3.6.1.4.1.2544.1.12.4.1.83.1.1	VariablePointer	read-only	Pointer to a policer instance which is associated with envelope.
cmNetPortExpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.84		not-accessible	Ethernet Network Port Exp drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortExpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.84.1		not-accessible	A conceptual row in the cmNetPortExpDEEncTable.
I32 cmNetPortExpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.84.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible encoding table.
VLA cmNetPortExpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.84.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmNetPortExpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.84.1.3	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmNetPortExpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.84.1.4	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop eligibility encoded into it.
cmNetPortExpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.85		not-accessible	Ethernet Network Port Exp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmNetPortExpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.85.1		not-accessible	A conceptual row in the cmNetPortExpDEDecTable.
I32 cmNetPortExpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.85.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible decoding table.
VLA cmNetPortExpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.85.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortExpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.85.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming Exp value.
T/F cmNetPortExpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.85.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming Exp value.
cmNetPortExpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.86		not-accessible	Ethernet Network Port Exp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the Exp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmNetPortExpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.86.1		not-accessible	A conceptual row in the cmNetPortExpDEPairEntry.
I32 cmNetPortExpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.86.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible priority pair table.
VLA cmNetPortExpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.86.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortExpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.86.1.3	VlanPriority	read-write	This object is the drop eligible priority.
cmNetPortIpPrecDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.87		not-accessible	Ethernet Network Port IpPrec drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortIpPrecDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.87.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEEncTable.
I32 cmNetPortIpPrecDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.87.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible encoding table.
VLA cmNetPortIpPrecDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.87.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmNetPortIpPrecDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.87.1.3	VlanPriority	read-write	This object is the IpPrec value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmNetPortIpPrecDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.87.1.4	VlanPriority	read-write	This object is the IpPrec value that has a priority value with implicit drop eligibility encoded into it.
cmNetPortIpPrecDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.88		not-accessible	Ethernet Network Port IpPrec drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmNetPortIpPrecDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.88.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEDecTable.
I32 cmNetPortIpPrecDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.88.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible decoding table.
VLA cmNetPortIpPrecDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.88.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortIpPrecDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.88.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming IpPrec value.
T/F cmNetPortIpPrecDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.88.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming IpPrec value.
cmNetPortIpPrecDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.89		not-accessible	Ethernet Network Port IpPrec drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the IpPrec DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmNetPortIpPrecDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.89.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEPairEntry.
I32 cmNetPortIpPrecDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.89.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible priority pair table.
VLA cmNetPortIpPrecDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.89.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortIpPrecDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.89.1.3	VlanPriority	read-write	This object is the drop eligible priority.
cmNetPortEncapPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.90		not-accessible	Ethernet Network Port EncapPcp drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortEncapPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.90.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEEncTable.
I32 cmNetPortEncapPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.90.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible encoding table.
VLA cmNetPortEncapPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.90.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmNetPortEncapPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.90.1.3	VlanPriority	read-write	This object is the EncapPcp value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmNetPortEncapPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.90.1.4	VlanPriority	read-write	This object is the EncapPcp value that has a priority value with implicit drop eligibility encoded into it.
cmNetPortEncapPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.91		not-accessible	Ethernet Network Port EncapPcp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmNetPortEncapPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.91.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEDecTable.
I32 cmNetPortEncapPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.91.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible decoding table.
VLA cmNetPortEncapPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.91.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortEncapPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.91.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming EncapPcp value.
T/F cmNetPortEncapPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.91.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming EncapPcp value.
cmNetPortEncapPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.92		not-accessible	Ethernet Network Port EncapPcp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the EncapPcp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmNetPortEncapPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.92.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEPairEntry.
I32 cmNetPortEncapPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.92.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible priority pair table.
VLA cmNetPortEncapPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.92.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortEncapPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.92.1.3	VlanPriority	read-write	This object is the drop eligible priority.
f3SatelliteTable	1.3.6.1.4.1.2544.1.12.4.1.93		not-accessible	A list of GNSS Satellite entries on the NIDs.
f3SatelliteEntry	1.3.6.1.4.1.2544.1.12.4.1.93.1		not-accessible	A conceptual row in the f3SatelliteTable Entries can be created/deleted in this table by management application action.
U32 f3SatelliteIndex	1.3.6.1.4.1.2544.1.12.4.1.93.1.1	Unsigned32	not-accessible	An integer index value used to uniquely identify this Satellite Entry in the f3SatelliteTable.
T/F f3SatelliteInUse	1.3.6.1.4.1.2544.1.12.4.1.93.1.2	TruthValue	read-only	This object indicates whether the Satellite Entry been used by GNSS receiver. It is supported only on OSA542x devices.
U32 f3SatelliteSV	1.3.6.1.4.1.2544.1.12.4.1.93.1.3	Unsigned32	read-only	This object indicates the Satellite Entry SV PRN number.
CON f3SatelliteSVType	1.3.6.1.4.1.2544.1.12.4.1.93.1.4	ConstellationTypesBitMap	read-only	This object indicates the Satellite Entry Constellation Type.
U32 f3SatelliteCNO	1.3.6.1.4.1.2544.1.12.4.1.93.1.5	Unsigned32	read-only	This object indicates the Satellite Entry Signal Level (Carrier-to-Noise power ratio) in dB-Hz units.
SAT f3SatelliteHealth	1.3.6.1.4.1.2544.1.12.4.1.93.1.6	SatelliteHealth	read-only	This object indicates the Satellite Entry Health.
U32 f3SatelliteAzimuth	1.3.6.1.4.1.2544.1.12.4.1.93.1.7	Unsigned32	read-only	This object indicates the Satellite Entry Azimuth Angle in degrees.
U32 f3SatelliteElevation	1.3.6.1.4.1.2544.1.12.4.1.93.1.8	Unsigned32	read-only	This object indicates the Satellite Entry Elevation Angle in degrees.
NUM f3SatelliteGnssReceiverPort	1.3.6.1.4.1.2544.1.12.4.1.93.1.9	VariablePointer	read-only	This object provides the GNSS Receiver Port OID related to this Satellite Entry.
cmEthernetTrafficPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.94		not-accessible	A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes.
cmEthernetTrafficPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.94.1		not-accessible	A conceptual row in the cmEthernetTrafficPortJdsuExtTable.
T/F cmEthernetTrafficPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.94.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
VLA cmEthernetTrafficPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.94.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
STR cmEthernetTrafficPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.94.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
f3FpQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.95		not-accessible	A list of entries corresponding to Flow Point Quality of Service Shaper for configuration purposes.
f3FpQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.95.1		not-accessible	A conceptual row in the f3FpQosShaperTable. These entries represent an Flow Point Quality of Service Shaper.
I32 f3FpQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.95.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Shaper.
ADM f3FpQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.95.1.2	AdminState	read-create	This object represents the Administrative State of a Shaper.
OPE f3FpQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.95.1.3	OperationalState	read-only	This object represents the Operational State of a Shaper.
SEC f3FpQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.95.1.4	SecondaryState	read-only	This object represents the Secondary State of the Shaper.
U32 f3FpQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.95.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.
U32 f3FpQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.95.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.
U32 f3FpQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.95.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3FpQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.95.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3FpQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.95.1.9	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of a Shaper.
U32 f3FpQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.95.1.10	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of a Shaper.
U32 f3FpQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.95.1.11	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
I32 f3FpQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.95.1.12	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
STO f3FpQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.95.1.13	StorageType	read-create	The type of storage configured for this entry.
ROW f3FpQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.95.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3FpQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3FpQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3FpQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
I32 f3FpQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.95.1.15	Integer32	read-write	This object represents the wfq weight of the QoS Shaper.
f3FpQosPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.96		not-accessible	A list of entries corresponding to Flow Point Quality of Service Policer for configuration purposes.
f3FpQosPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.96.1		not-accessible	A conceptual row in the f3FpQosPolicerTable. These entries represent an Flow Point Quality of Service Policer.
I32 f3FpQosPolicerIndex	1.3.6.1.4.1.2544.1.12.4.1.96.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
ADM f3FpQosPolicerAdminState	1.3.6.1.4.1.2544.1.12.4.1.96.1.2	AdminState	read-create	This object represents the Administrative State of a Policer.
OPE f3FpQosPolicerOperationalState	1.3.6.1.4.1.2544.1.12.4.1.96.1.3	OperationalState	read-only	This object represents the Operational State of a Policer.
SEC f3FpQosPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.96.1.4	SecondaryState	read-only	This object represents the Secondary State of a Policer.
U32 f3FpQosPolicerCIRLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.
U32 f3FpQosPolicerCIRHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.
U32 f3FpQosPolicerEIRLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
U32 f3FpQosPolicerEIRHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
I32 f3FpQosPolicerCBS	1.3.6.1.4.1.2544.1.12.4.1.96.1.9	Integer32	read-create	This object represents the Commited Burst Size (CBS) of a Policer.
I32 f3FpQosPolicerEBS	1.3.6.1.4.1.2544.1.12.4.1.96.1.10	Integer32	read-create	This object represents the Excess Burst Size (EBS) of a Policer.
POL f3FpQosPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.4.1.96.1.11	PolicerAlgorithmType	read-only	This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
POL f3FpQosPolicerColorMode	1.3.6.1.4.1.2544.1.12.4.1.96.1.12	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F f3FpQosPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.96.1.13	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
T/F f3FpQosPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.96.1.14	TruthValue	read-create	This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.
STO f3FpQosPolicerStorageType	1.3.6.1.4.1.2544.1.12.4.1.96.1.15	StorageType	read-create	The type of storage configured for this entry.
ROW f3FpQosPolicerRowStatus	1.3.6.1.4.1.2544.1.12.4.1.96.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3FpQosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3FpQosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3FpQosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
U32 f3FpQosPolicerCIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.17	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits.
U32 f3FpQosPolicerCIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.18	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.
U32 f3FpQosPolicerEIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.19	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits.
U32 f3FpQosPolicerEIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.20	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits.
NUM f3FpQosPolicerEnvelopeObject	1.3.6.1.4.1.2544.1.12.4.1.96.1.21	VariablePointer	read-write	This object allows specification of envelope object.
I32 f3FpQosPolicerRank	1.3.6.1.4.1.2544.1.12.4.1.96.1.22	Integer32	read-write	This object allows specification of rank value.
cmEthernetTrafficPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.97		not-accessible	A list of entries corresponding to Ethernet Traffic Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device.
cmEthernetTrafficPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.97.1		not-accessible	A conceptual row in the cmEthernetTrafficPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Traffic Port.
I32 cmEthernetTrafficPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.97.1.1	Integer32	read-only	Unique Index value to access the CPD row.
CMC cmEthernetTrafficPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetTrafficPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetTrafficPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetTrafficPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetTrafficPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetTrafficPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmEthernetTrafficPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetTrafficPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetTrafficPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetTrafficPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetTrafficPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmEthernetTrafficPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetTrafficPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetTrafficPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetTrafficPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetTrafficPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetTrafficPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetTrafficPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmEthernetTrafficPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetTrafficPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetTrafficPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetTrafficPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetTrafficPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetTrafficPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC cmEthernetTrafficPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetTrafficPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetTrafficPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
MAC cmEthernetTrafficPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.97.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
CMC cmEthernetTrafficPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetTrafficPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.49	CmControlProtocolDispType	read-write	PTP untagged frame Disposition type.
CMC cmEthernetTrafficPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
f3FlowPointCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.98		not-accessible	A list of entries corresponding to Flow Point Control Protocol Disposition V2.
f3FlowPointCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.98.1		not-accessible	A conceptual row in the f3FlowPointCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Flow Point.
I32 f3FlowPointCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.98.1.1	Integer32	not-accessible	Unique Index value to access the CPD row.
CMC f3FlowPointCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.2	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC f3FlowPointCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC f3FlowPointCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC f3FlowPointCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC f3FlowPointCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC f3FlowPointCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC f3FlowPointCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC f3FlowPointCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC f3FlowPointCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC f3FlowPointCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC f3FlowPointCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC f3FlowPointCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC f3FlowPointCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC f3FlowPointCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC f3FlowPointCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC f3FlowPointCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC f3FlowPointCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC f3FlowPointCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC f3FlowPointCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC f3FlowPointCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC f3FlowPointCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.22	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMA f3FlowPointCpdV2ActiveControlProtocols	1.3.6.1.4.1.2544.1.12.4.1.98.1.23	CmActiveControlProtocolsType	read-only	List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
CMC f3FlowPointCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.24	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC f3FlowPointCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.25	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC f3FlowPointCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.26	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC f3FlowPointCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.27	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC f3FlowPointCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.28	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC f3FlowPointCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.29	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC f3FlowPointCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC f3FlowPointCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC f3FlowPointCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC f3FlowPointCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC f3FlowPointCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC f3FlowPointCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC f3FlowPointCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC f3FlowPointCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC f3FlowPointCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC f3FlowPointCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC f3FlowPointCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC f3FlowPointCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.41	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC f3FlowPointCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.42	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC f3FlowPointCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.43	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
f3AclRuleTable	1.3.6.1.4.1.2544.1.12.4.1.99		not-accessible	A list of entries for the L2 ACL rule.
f3AclRuleEntry	1.3.6.1.4.1.2544.1.12.4.1.99.1		not-accessible	A conceptual row in the f3AclRuleTable.
I32 f3AclRuleIndex	1.3.6.1.4.1.2544.1.12.4.1.99.1.1	Integer32	not-accessible	The ACL rule number.
ADM f3AclRuleAdminState	1.3.6.1.4.1.2544.1.12.4.1.99.1.2	AdminState	read-write	This object allows user configure the Acl Rule in-service or management state.
STR f3AclRuleAlias	1.3.6.1.4.1.2544.1.12.4.1.99.1.3	F3DisplayString	read-write	The ACL rule alias.
I32 f3AclRulePriority	1.3.6.1.4.1.2544.1.12.4.1.99.1.4	Integer32	read-write	The ACL rule priority.
ACL f3AclRuleOperation	1.3.6.1.4.1.2544.1.12.4.1.99.1.5	AclRuleOperation	read-write	The ACL rule action.
T/F f3AclRuleCosOverrideControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.6	TruthValue	read-write	The ACL rule COS Override control.
I32 f3AclRuleCOS	1.3.6.1.4.1.2544.1.12.4.1.99.1.7	Integer32	read-write	The ACL rule class of service.
T/F f3AclRuleSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.8	TruthValue	read-write	The ACL rule Source MAC address control.
MAC f3AclRuleSrcMacAddress	1.3.6.1.4.1.2544.1.12.4.1.99.1.9	MacAddress	read-write	The ACL rule dynamic Source MAC address.
MAC f3AclRuleSrcMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.99.1.10	MacAddress	read-write	The ACL rule dynamic Source MAC address mask.
T/F f3AclRuleDstMacAddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.11	TruthValue	read-write	The ACL rule dynamic Destination MAC address control.
MAC f3AclRuleDstMacAddress	1.3.6.1.4.1.2544.1.12.4.1.99.1.12	MacAddress	read-write	The ACL rule dynamic Destination MAC address.
MAC f3AclRuleDstMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.99.1.13	MacAddress	read-write	The ACL rule dynamic Destination MAC address mask.
T/F f3AclRuleOuterVlanVIDControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.14	TruthValue	read-write	The ACL rule outer VID control.
VLA f3AclRuleOuterVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.15	VlanId	read-write	The ACL rule outer Vlan ID low limit.
VLA f3AclRuleOuterVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.16	VlanId	read-write	The ACL rule outer Vlan ID high limit.
T/F f3AclRuleInnerVlanVIDControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.17	TruthValue	read-write	The ACL rule inner VID control.
VLA f3AclRuleInnerVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.18	VlanId	read-write	The ACL rule inner Vlan ID low limit.
VLA f3AclRuleInnerVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.19	VlanId	read-write	The ACL rule Inner Vlan ID high limit.
T/F f3AclRuleOuterVlanPcpControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.20	TruthValue	read-write	The ACL rule outer vlan PCP control.
VLA f3AclRuleOuterVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.21	VlanPriority	read-write	The ACL rule outer vlan PCP priority low limit.
VLA f3AclRuleOuterVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.22	VlanPriority	read-write	The ACL rule outer vlan PCP priority high limit.
T/F f3AclRuleInnerVlanPcpControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.23	TruthValue	read-write	The ACL rule inner vlan PCP control.
VLA f3AclRuleInnerVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.24	VlanPriority	read-write	The ACL rule inner vlan PCP priority low limit.
VLA f3AclRuleInnerVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.25	VlanPriority	read-write	The ACL rule inner vlan PCP priority high limit.
T/F f3AclRuleOuterVlanDeiControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.26	TruthValue	read-write	The ACL rule outer vlan DEI control.
U32 f3AclRuleOuterVlanDei	1.3.6.1.4.1.2544.1.12.4.1.99.1.27	Unsigned32	read-write	The ACL rule outer vlan DEI.
T/F f3AclRuleEtherTypeControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.28	TruthValue	read-write	The ACL rule outer vlan ether type control.
I32 f3AclRuleEtherType	1.3.6.1.4.1.2544.1.12.4.1.99.1.29	Integer32	read-write	The ACL rule outer vlan ether type.
T/F f3AclRuleIpv4PriorityControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.30	TruthValue	read-write	The ACL rule IPv4 Priority control whether enabled.
I32 f3AclRuleIpv4PriorityLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.31	Integer32	read-write	The ACL rule IPv4 priority low limit.
I32 f3AclRuleIpv4PriorityHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.32	Integer32	read-write	The ACL rule ipv4 priority high limit.
T/F f3AclRuleProtocolControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.33	TruthValue	read-write	The ACL rule protocol control whether enabled.
I32 f3AclRuleProtocolNumber	1.3.6.1.4.1.2544.1.12.4.1.99.1.34	Integer32	read-write	The ACL rule protocol number.
T/F f3AclRuleSrcIpv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.35	TruthValue	read-write	The ACL rule source IPv4 Adress control whether enabled.
IP f3AclRuleSrcIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.36	IpAddress	read-write	The ACL rule source IPv4 Adress low limit.
IP f3AclRuleSrcIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.37	IpAddress	read-write	The ACL rule source ipv4 adress high limit.
T/F f3AclRuleDstIpv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.38	TruthValue	read-write	The ACL rule Destination IPv4 Adress control whether enabled.
IP f3AclRuleDstIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.39	IpAddress	read-write	The ACL rule Destination IPv4 Adress low limit.
IP f3AclRuleDstIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.40	IpAddress	read-write	The ACL rule destination ipv4 adress high limit.
T/F f3AclRuleSrcPortControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.41	TruthValue	read-write	The ACL rule source port whether enabled.
I32 f3AclRuleSrcPortLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.42	Integer32	read-write	The ACL rule source port low limit.
I32 f3AclRuleSrcPortHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.43	Integer32	read-write	The ACL rule source port low limit.
T/F f3AclRuleDstPortControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.44	TruthValue	read-write	The ACL rule destination port whether enabled.
I32 f3AclRuleDstPortLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.45	Integer32	read-write	The ACL rule destination port low limit.
I32 f3AclRuleDstPortHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.46	Integer32	read-write	The ACL rule destination port low limit.
T/F f3AclRuleTcpFlagsControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.47	TruthValue	read-write	The ACL rule outer vlan TCP flags control.
I32 f3AclRuleTcpFlags	1.3.6.1.4.1.2544.1.12.4.1.99.1.48	Integer32	read-write	The ACL rule outer vlan TCP flags.
STO f3AclRuleStorageType	1.3.6.1.4.1.2544.1.12.4.1.99.1.49	StorageType	read-create	The type of storage configured for this entry.
ROW f3AclRuleRowStatus	1.3.6.1.4.1.2544.1.12.4.1.99.1.50	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3AclRuleActive	1.3.6.1.4.1.2544.1.12.4.1.99.1.51	TruthValue	read-write	The ACL Rule Active activates/deactivates ACL Rule.
T/F f3AclRuleSrcIpv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.52	TruthValue	read-write	The ACL rule source ipv6 adress is control enabled.
ADR f3AclRuleSrcIpv6Address	1.3.6.1.4.1.2544.1.12.4.1.99.1.53	Ipv6Address	read-write	The ACL rule source ipv6 adress high limit.
I32 f3AclRuleSrcIpv6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.4.1.99.1.54	Integer32	read-write	The ACL rule source ipv6 prefix length.
T/F f3AclRuleDstIpv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.55	TruthValue	read-write	The ACL rule destination ipv6 Adress is control enabled.
ADR f3AclRuleDstIpv6Address	1.3.6.1.4.1.2544.1.12.4.1.99.1.56	Ipv6Address	read-write	The ACL rule destination ipv6 adress.
I32 f3AclRuleDstIpv6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.4.1.99.1.57	Integer32	read-write	The ACL rule destination ipv6 prefix length.
T/F f3AclRuleIpV6FlowLabelControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.58	TruthValue	read-write	The ACL rule ipv6 Flow Label Control enables/disables Flow Label.
I32 f3AclRuleIpV6FlowLabel	1.3.6.1.4.1.2544.1.12.4.1.99.1.59	Integer32	read-write	The ACL rule ipv6 Flow Label.
T/F f3AclRulePriorityControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.60	TruthValue	read-write	The ACL rule Priority control whether enabled.
I32 f3AclRulePriorityLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.61	Integer32	read-write	The ACL rule priority low limit.
I32 f3AclRulePriorityHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.62	Integer32	read-write	The ACL rule priority high limit.
f3EthernetTrafficPortExpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.100		not-accessible	Ethernet Traffic Port Exp drop eligibility encoding table. This is applied to a frame that is egressing at the Traffic Port.
f3EthernetTrafficPortExpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.100.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEEncTable.
I32 f3EthernetTrafficPortExpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.100.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible encoding table.
VLA f3EthernetTrafficPortExpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.100.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA f3EthernetTrafficPortExpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.100.1.3	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop ineligibility encoded into it.
VLA f3EthernetTrafficPortExpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.100.1.4	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop eligibility encoded into it.
f3EthernetTrafficPortExpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.101		not-accessible	Ethernet Traffic Port Exp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
f3EthernetTrafficPortExpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.101.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEDecTable.
I32 f3EthernetTrafficPortExpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.101.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible decoding table.
VLA f3EthernetTrafficPortExpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.101.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA f3EthernetTrafficPortExpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.101.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming Exp value.
T/F f3EthernetTrafficPortExpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.101.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming Exp value.
f3EthernetTrafficPortExpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.102		not-accessible	Ethernet Traffic Port Exp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the Exp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
f3EthernetTrafficPortExpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.102.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEPairEntry.
I32 f3EthernetTrafficPortExpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.102.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible priority pair table.
VLA f3EthernetTrafficPortExpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.102.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA f3EthernetTrafficPortExpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.102.1.3	VlanPriority	read-write	This object is the drop eligible priority.
cmEthernetNetPortPppoeParamTable	1.3.6.1.4.1.2544.1.12.4.1.103		not-accessible	A list of entries corresponding to Ethernet Network Port PPPoE Parameters for configuration purposes.
cmEthernetNetPortPppoeParamEntry	1.3.6.1.4.1.2544.1.12.4.1.103.1		not-accessible	A conceptual row in the cmEthernetNetPortPppoeParamTable.
T/F cmEthernetNetPortPppoeOuterVlanControl	1.3.6.1.4.1.2544.1.12.4.1.103.1.1	TruthValue	read-write	This object specify outer vlan whether enabled.
U32 cmEthernetNetPortPppoeOuterVlanEtherType	1.3.6.1.4.1.2544.1.12.4.1.103.1.2	Unsigned32	read-write	This object specify outer vlan ether type value.
VLA cmEthernetNetPortPppoeOuterVlanId	1.3.6.1.4.1.2544.1.12.4.1.103.1.3	VlanId	read-write	This object specify vlan id of outer tag.
VLA cmEthernetNetPortPppoeOuterVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.103.1.4	VlanPriority	read-write	This object specify vlan priority of outer tag.
T/F cmEthernetNetPortPppoeInnerVlanControl	1.3.6.1.4.1.2544.1.12.4.1.103.1.5	TruthValue	read-write	This object specify inner vlan whether enabled.
U32 cmEthernetNetPortPppoeInnerVlanEtherType	1.3.6.1.4.1.2544.1.12.4.1.103.1.6	Unsigned32	read-write	This object specify inner vlan ether type value.
VLA cmEthernetNetPortPppoeInnerVlanId	1.3.6.1.4.1.2544.1.12.4.1.103.1.7	VlanId	read-write	This object specify vlan id of inner tag.
VLA cmEthernetNetPortPppoeInnerVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.103.1.8	VlanPriority	read-write	This object specify vlan priority of inner tag.
STR cmEthernetNetPortPppoeServiceName	1.3.6.1.4.1.2544.1.12.4.1.103.1.9	DisplayString	read-write	The service name requested.
U32 cmEthernetNetPortPppoeLcpKeepAlivePeriod	1.3.6.1.4.1.2544.1.12.4.1.103.1.10	Unsigned32	read-write	The service name requested.
U32 cmEthernetNetPortPppoeLcpRetryThreshold	1.3.6.1.4.1.2544.1.12.4.1.103.1.11	Unsigned32	read-write	This object specify the lcp retry threshold.
STR cmEthernetNetPortPppoeRxAcName	1.3.6.1.4.1.2544.1.12.4.1.103.1.12	DisplayString	read-only	The ac name received.
STR cmEthernetNetPortPppoeRxServiceName	1.3.6.1.4.1.2544.1.12.4.1.103.1.13	DisplayString	read-only	The service names received.
U32 cmEthernetNetPortPppoeSessionId	1.3.6.1.4.1.2544.1.12.4.1.103.1.14	Unsigned32	read-only	pppoe session id.
PPP cmEthernetNetPortPppoeConnStatus	1.3.6.1.4.1.2544.1.12.4.1.103.1.15	PPPoEConnectionStatus	read-only	This object provides the connection status of pppoe connection.
cmEthernetNetPortXdslParamTable	1.3.6.1.4.1.2544.1.12.4.1.104		not-accessible	A list of entries corresponding to Ethernet Network Port XDSL Parameters for configuration purposes.
cmEthernetNetPortXdslParamEntry	1.3.6.1.4.1.2544.1.12.4.1.104.1		not-accessible	A conceptual row in the cmEthernetNetPortXdslParamTable.
T/F cmEthernetNetPortXdslConnControl	1.3.6.1.4.1.2544.1.12.4.1.104.1.1	TruthValue	read-write	This object enable/disable xdsl link.
XDS cmEthernetNetPortXdslModulationMode	1.3.6.1.4.1.2544.1.12.4.1.104.1.2	XDSLModulationMode	read-write	Xdsl modulation.
T/F cmEthernetNetPortXdslBitSwapEnabled	1.3.6.1.4.1.2544.1.12.4.1.104.1.3	TruthValue	read-write	Enable/disable bitswap.
T/F cmEthernetNetPortXdslGvectorEnabled	1.3.6.1.4.1.2544.1.12.4.1.104.1.4	TruthValue	read-write	Enable/disable G.vector.
VDS cmEthernetNetPortXdslVdslProfile	1.3.6.1.4.1.2544.1.12.4.1.104.1.5	VDSLProfileFields	read-write	Selected vdsl profile.
XDS cmEthernetNetPortXdslStatus	1.3.6.1.4.1.2544.1.12.4.1.104.1.6	XDSLStatus	read-only	Xdsl link status.
VDS cmEthernetNetPortXdslCurVdslProfile	1.3.6.1.4.1.2544.1.12.4.1.104.1.7	VDSLProfileField	read-only	Selected vdsl profile.
U32 cmEthernetNetPortXdslActualLinkRateUpStream	1.3.6.1.4.1.2544.1.12.4.1.104.1.8	Unsigned32	read-only	Actual link rate upstream.
U32 cmEthernetNetPortXdslActualLinkRateDownStream	1.3.6.1.4.1.2544.1.12.4.1.104.1.9	Unsigned32	read-only	Actual link rate downstream.
XDS cmEthernetNetPortXdslControlChannel	1.3.6.1.4.1.2544.1.12.4.1.104.1.10	XDSLControlChannel	read-write	Actual link rate downstream.
XDS cmEthernetNetPortXdslCarrierSet	1.3.6.1.4.1.2544.1.12.4.1.104.1.11	XDSLCarrierSet	read-write	Specify the carrier set.
XDS cmEthernetNetPortXdslMode	1.3.6.1.4.1.2544.1.12.4.1.104.1.12	XDSLMode	read-only	Xdsl mode after handshake.
XDS cmEthernetNetPortXdslAnnex	1.3.6.1.4.1.2544.1.12.4.1.104.1.13	XDSLAnnex	read-only	Annex version after handshake.
I32 cmEthernetNetPortXdslDsSNRMargin	1.3.6.1.4.1.2544.1.12.4.1.104.1.14	Integer32	read-only	Downstream SNR margin.
I32 cmEthernetNetPortXdslUsSNRMargin	1.3.6.1.4.1.2544.1.12.4.1.104.1.15	Integer32	read-only	Upstream SNR margin.
I32 cmEthernetNetPortXdslDsSignalAttenuation	1.3.6.1.4.1.2544.1.12.4.1.104.1.16	Integer32	read-only	Downstream signal attenuation.
I32 cmEthernetNetPortXdslDsLineAttenuation	1.3.6.1.4.1.2544.1.12.4.1.104.1.17	Integer32	read-only	Downstream line attenuation.
I32 cmEthernetNetPortXdslDsTxPower	1.3.6.1.4.1.2544.1.12.4.1.104.1.18	Integer32	read-only	Downstream transmit power.
I32 cmEthernetNetPortXdslUsTxPower	1.3.6.1.4.1.2544.1.12.4.1.104.1.19	Integer32	read-only	Upstream transmit power.
U32 cmEthernetNetPortXdslDsAttainableRate	1.3.6.1.4.1.2544.1.12.4.1.104.1.20	Unsigned32	read-only	Attainable link rate downstream.
U32 cmEthernetNetPortXdslUsAttainableRate	1.3.6.1.4.1.2544.1.12.4.1.104.1.21	Unsigned32	read-only	attainable link rate upstream.
sciPortTable	1.3.6.1.4.1.2544.1.12.4.1.105		not-accessible	A list of entries corresponding to SCI Port Facilities for configuration purposes.
sciPortEntry	1.3.6.1.4.1.2544.1.12.4.1.105.1		not-accessible	A conceptual row in the sciPortTable.
I32 sciPortIndex	1.3.6.1.4.1.2544.1.12.4.1.105.1.1	Integer32	read-only	An integer index value used to uniquely identify this SCI Port.
ADM sciPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.105.1.2	AdminState	read-write	This object represents the Administrative State of the SCI Port.
OPE sciPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.105.1.3	OperationalState	read-only	This object represents the Operational State of the SCI Port.
SCI sciPortSignalMode	1.3.6.1.4.1.2544.1.12.4.1.105.1.4	SciSignalMode	read-write	This object allows to manage the signal mode of the SCI port.
SCI sciPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.105.1.5	SciSignalDirection	read-write	This object allows to manage the signal direction of the SCI port.
SCI sciPortRxSsmQL	1.3.6.1.4.1.2544.1.12.4.1.105.1.6	SciRxSsmQL	read-write	This object allows to manage the RX QL of the SCI port.
f3IrigRs422OutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.106		not-accessible	A list of entries corresponding to IRIG RS422 output ports.
f3IrigRs422OutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.106.1		not-accessible	A conceptual row in the f3IrigRs422OutputPortTable.
I32 f3IrigRs422OutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG RS422 output port in its parent card.
NUM f3IrigRs422OutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
PHY f3IrigRs422OutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
STR f3IrigRs422OutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.106.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
ADM f3IrigRs422OutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.106.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
OPE f3IrigRs422OutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.106.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
SEC f3IrigRs422OutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.106.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
IRI f3IrigRs422OutputPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.106.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
IRI f3IrigRs422OutputPortControlField	1.3.6.1.4.1.2544.1.12.4.1.106.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
f3IrigOpticalOutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.107		not-accessible	A list of entries corresponding to IRIG Optical output ports.
f3IrigOpticalOutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.107.1		not-accessible	A conceptual row in the f3IrigOpticalOutputPortTable.
I32 f3IrigOpticalOutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG optical output port in it parent card.
NUM f3IrigOpticalOutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
PHY f3IrigOpticalOutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
STR f3IrigOpticalOutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.107.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
ADM f3IrigOpticalOutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.107.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
OPE f3IrigOpticalOutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.107.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
SEC f3IrigOpticalOutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.107.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
IRI f3IrigOpticalOutputPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.107.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
IRI f3IrigOpticalOutputPortControlField	1.3.6.1.4.1.2544.1.12.4.1.107.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
f3IrigRelayOutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.108		not-accessible	A list of entries corresponding to IRIG time relay output ports.
f3IrigRelayOutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.108.1		not-accessible	A conceptual row in the f3IrigRelayOutputPortTable.
I32 f3IrigRelayOutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG time relay output port in its parent card.
NUM f3IrigRelayOutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
PHY f3IrigRelayOutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
STR f3IrigRelayOutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.108.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
ADM f3IrigRelayOutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.108.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
OPE f3IrigRelayOutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.108.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
SEC f3IrigRelayOutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.108.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
IRI f3IrigRelayOutputPortRelayOperation	1.3.6.1.4.1.2544.1.12.4.1.108.1.8	IrigRelayOperation	read-write	This object allows to manage the relay operation of the IRIG output port.
f3IrigOutputGroupTable	1.3.6.1.4.1.2544.1.12.4.1.109		not-accessible	A list of entries corresponding to output groups.
f3IrigOutputGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.109.1		not-accessible	A conceptual row in the f3IrigOutputGroupTable.
I32 f3IrigOutputGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG output group in its parent card.
NUM f3IrigOutputGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
PHY f3IrigOutputGroupEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
STR f3IrigOutputGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.109.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output group entity.
IRI f3IrigOutputGroupExtensionType	1.3.6.1.4.1.2544.1.12.4.1.109.1.5	IrigGroupExtensionType	read-write	This object allows to manage the Time Code of the IRIG output group.
T/F f3IrigOutputGroupExtensionDetection	1.3.6.1.4.1.2544.1.12.4.1.109.1.6	TruthValue	read-only	This object allows to manage the Control field of the IRIG output group.
f3IrigOutputUnitPortTable	1.3.6.1.4.1.2544.1.12.4.1.110		not-accessible	A list of entries corresponding to IRIG output unit ports in IRIG output groups for management purposes.
f3IrigOutputUnitPortEntry	1.3.6.1.4.1.2544.1.12.4.1.110.1		not-accessible	A conceptual row in the f3IrigOutputUnitPortTable.
I32 f3IrigOutputUnitPortIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG output unit port in its output group.
NUM f3IrigOutputUnitPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
PHY f3IrigOutputUnitPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
STR f3IrigOutputUnitPortAlias	1.3.6.1.4.1.2544.1.12.4.1.110.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
ADM f3IrigOutputUnitPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.110.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
OPE f3IrigOutputUnitPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.110.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
SEC f3IrigOutputUnitPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.110.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
IRI f3IrigOutputUnitPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.110.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
IRI f3IrigOutputUnitPortControlField	1.3.6.1.4.1.2544.1.12.4.1.110.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
IRI f3IrigOutputUnitPortType	1.3.6.1.4.1.2544.1.12.4.1.110.1.10	IrigOutputType	read-write	This object allows to manage the output type, digital or analogous, of the IRIG output port.
IRI f3IrigOutputUnitPortDigitalVoltage	1.3.6.1.4.1.2544.1.12.4.1.110.1.11	IrigDigitalSignalVoltage	read-write	This object allows to manage, for digital output type only, the voltage of the IRIG output port.
ccInputPortTable	1.3.6.1.4.1.2544.1.12.4.1.111		not-accessible	A list of entries corresponding to Composite input Port Facilities for configuration purposes.
ccInputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.111.1		not-accessible	A conceptual row in the ccInputPortTable.
I32 ccInputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.1	Integer32	read-only	An integer index value used to uniquely identify this CC input Port.
NUM ccInputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this input port as an interface in ifTable entries with ifIndex value.
PHY ccInputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this input port as an entity in entityPhysical entries with entPhysicalIndex value.
STR ccInputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.111.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the input port entity.
ADM ccInputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.111.1.5	AdminState	read-write	This object represents the Administrative State of the CC input Port.
OPE ccInputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.111.1.6	OperationalState	read-only	This object represents the Operational State of the CC input Port.
SEC ccInputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.111.1.7	SecondaryState	read-only	This object represents the Secondary State of the CC input port.
ccGroupTable	1.3.6.1.4.1.2544.1.12.4.1.112		not-accessible	A list of entries corresponding to Composite group output Facilities for configuration purposes.
ccGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.112.1		not-accessible	A conceptual row in the ccGroupTable.
I32 ccGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.1	Integer32	read-only	An integer index value used to uniquely identify this CC Group.
NUM ccGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this group as an interface in ifTable entries with ifIndex value.
PHY ccGroupEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this input port as an entity in entityPhysical entries with entPhysicalIndex value.
STR ccGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.112.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the group entity.
CCA ccGroupActivePorts	1.3.6.1.4.1.2544.1.12.4.1.112.1.5	CcActivePortState	read-write	This object represents the Active State for each port of the CC 10 output port Group.
I32 ccGroupPhaseAdjust	1.3.6.1.4.1.2544.1.12.4.1.112.1.6	Integer32	read-write	The delay of CC output. This value is duplicated to all the CC outputs of all the CC cards in the same 54x0. This value is usually derived from a phase measurement of the CC input. It could also use a different method to derive the CC Phase Adjust..
CCP ccGroupDutyCycle	1.3.6.1.4.1.2544.1.12.4.1.112.1.7	CcPortDutyCycle	read-write	63/37 or 50/50 duty cycles.
cmEncapFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.113		not-accessible	A list of entries corresponding to Encap FlowPoint for configuration purposes.
cmEncapFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.113.1		not-accessible	A conceptual row in the cmEncapFlowPointTable. These entries represent an Encap FlowPoint.
I32 cmEncapFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.113.1.1	Integer32	read-create	The integer index value corresponding to an Encap FlowPoint.
STR cmEncapFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.113.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the FlowPoint.
NUM cmEncapFlowPointAssociatedFlowId	1.3.6.1.4.1.2544.1.12.4.1.113.1.3	VariablePointer	read-only	This object provides the association of an Flow with an Encap FlowPoint.
NUM cmEncapFlowPointRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.113.1.4	VariablePointer	read-create	This object specifies EoMpls Pw object OID.
FLO cmEncapFlowPointCTagControl	1.3.6.1.4.1.2544.1.12.4.1.113.1.5	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3EncapFlowPointCTagVlanId) and priority (f3EncapFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3EncapFlowPointCTagVlanId and f3EncapFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3EncapFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
VLA cmEncapFlowPointCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.113.1.6	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3EncapFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmEncapFlowPointCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.113.1.7	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3EncapFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
FLO cmEncapFlowPointSTagControl	1.3.6.1.4.1.2544.1.12.4.1.113.1.8	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3EncapFlowPointSTagVlanId) and priority (f3EncapFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3EncapFlowPointSTagVlanId and f3EncapFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3EncapFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
VLA cmEncapFlowPointSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.113.1.9	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3EncapFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmEncapFlowPointSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.113.1.10	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3EncapFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
T/F cmEncapFlowPointEgressOuterTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.113.1.11	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmEncapFlowPointEgressInnerTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.113.1.12	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
NUM cmEncapFlowPointRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.113.1.13	VariablePointer	read-write	This object allows to set priority map profile.
STO cmEncapFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.113.1.14	StorageType	read-create	The type of storage configured for this entry.
ROW cmEncapFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.113.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmEncapFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmEncapFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmEncapFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmFacilityConformance	1.3.6.1.4.1.2544.1.12.4.2
cmFacilityCompliances	1.3.6.1.4.1.2544.1.12.4.2.1
cmFacilityCompliance	1.3.6.1.4.1.2544.1.12.4.2.1.1			Describes the requirements for conformance to the CM Facility group.
cmFacilityGroups	1.3.6.1.4.1.2544.1.12.4.2.2
cmFacilityObjectGroup	1.3.6.1.4.1.2544.1.12.4.2.2.1			*******************THIS GROUP IS NOW DEPRECATED ******************* A collection of objects used to manage the CM Facility group.
ethernetAccessPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.2			A collection of objects used to manage the F3 Ethernet Access Port function.
ethernetNetworkPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.3			A collection of objects used to manage the F3 Ethernet Network Port function.
ethernetMgmtPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.4			A collection of objects used to manage the F3 Ethernet Management Port function.
bitsPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.5			A collection of objects used to manage the F3 Bits Port function.
trafficGroup	1.3.6.1.4.1.2544.1.12.4.2.2.6			A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers.
prioMapGroup	1.3.6.1.4.1.2544.1.12.4.2.2.7			A collection of objects used to manage the F3 Priority Mapping function.
pcpEncodeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.8			A collection of objects used to manage the F3 Priority Mapping function.
cpdV2Group	1.3.6.1.4.1.2544.1.12.4.2.2.9			A collection of objects used to manage the Control Protocol Disposition version 2 function.
trafficGroupCmHub	1.3.6.1.4.1.2544.1.12.4.2.2.10			A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers.
ocnStmGroup	1.3.6.1.4.1.2544.1.12.4.2.2.11			A collection of objects used to manage the OCN/STM Line.
stsVcPathGroup	1.3.6.1.4.1.2544.1.12.4.2.2.12			A collection of objects used to manage the STS/VC Higher Order Path.
vtVcPathGroup	1.3.6.1.4.1.2544.1.12.4.2.2.13			A collection of objects used to manage the VT/VC Lower Order Path.
e1t1InterfaceGroup	1.3.6.1.4.1.2544.1.12.4.2.2.14			A collection of objects used to manage the E1/T1 Interface Group.
e3t3InterfaceGroup	1.3.6.1.4.1.2544.1.12.4.2.2.15			A collection of objects used to manage the E3/T3 Interface Group.
f3PulsePerSecondPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.16			A collection of objects used to manage the F3 Pulse Per Second Group.
f3TimeOfDayPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.17			A collection of objects used to manage the F3 Time of Day Port Group.
f3Gps10MhzPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.18			A collection of objects used to manage the F3 GPS 10 Mhz Port Group.
ethernetNetworkPortExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.19			A collection of objects used to manage the F3 Ethernet Network Port extense function.
f3GPSReceiverPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.20			A collection of objects used to manage the F3 GPS Receiver Port Group.
cmPsePortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.21			A collection of objects used to manage the pse port ext entry Group.
cmPseEXTGroup	1.3.6.1.4.1.2544.1.12.4.2.2.22			A collection of objects used to manage the pse group ext entry Group.
cmMPFlowGroup	1.3.6.1.4.1.2544.1.12.4.2.2.23			A collection of objects used to manage the MP flow entry Group.
cmMPFlowMemberGroup	1.3.6.1.4.1.2544.1.12.4.2.2.24			A collection of objects used to manage the MP flow Member entry Group.
cmEthernetTrafficPortPcpGroup	1.3.6.1.4.1.2544.1.12.4.2.2.25			A collection of objects used to manage the traffic port pcp Group.
neTMParamsGroup	1.3.6.1.4.1.2544.1.12.4.2.2.26			A collection of objects used to manage the ne facility entry Group.
cmEthernetTrafficPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.27			A collection of objects used to manage the traffic port entry Group.
cmFlowPointGroup	1.3.6.1.4.1.2544.1.12.4.2.2.28			A collection of objects used to manage the flow point entry Group.
ethernetAccessPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.29			A collection of objects used to manage the F3 Ethernet Access Port JDSU extense function.
ethernetNetworkPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.30			A collection of objects used to manage the F3 Ethernet Network Port JDSU extense function.
cmTrafficPortLpbkGroup	1.3.6.1.4.1.2544.1.12.4.2.2.31			A collection of objects used to manage the traffic port lpbk group.
cmPrioMapV2ProfileGroup	1.3.6.1.4.1.2544.1.12.4.2.2.32			A collection of objects used to manage the priority map profile group.
cmPrioMapV2IngressPrioMappingGroup	1.3.6.1.4.1.2544.1.12.4.2.2.33			A collection of objects used to manage the priority map group.
bits8PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.34			A collection of objects used to manage the Bits 8 Port Group function.
pps16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.35			A collection of objects used to manage the Pps 16 port card Group function.
clk16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.36			A collection of objects used to manage the CLK 16 port card Group function.
todPps16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.37			A collection of objects used to manage the TOD and PPS 16 port card Group function.
f3PolicerEnvelopeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.38			A collection of objects used to manage the policer envelope group function.
cmNetPortExpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.39			A collection of objects used to manage the exp de decoding and encoding group function.
cmNetPortIpPrecDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.40			A collection of objects used to manage the ip prec de decoding and encoding group function.
cmNetPortEncapPcpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.41			A collection of objects used to manage the encap PCP de decoding and encoding group function.
f3SatelliteGroup	1.3.6.1.4.1.2544.1.12.4.2.2.42			A collection of objects used to manage the GNSS satellite group function.
cmEthernetTrafficPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.43			A collection of objects used to manage the F3 Ethernet Traffic Port JDSU extense function.
f3FpQosShaperGroup	1.3.6.1.4.1.2544.1.12.4.2.2.44			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint Shaper.
f3FpQosPolicerGroup	1.3.6.1.4.1.2544.1.12.4.2.2.45			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint Policer.
cpdV2TrafficPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.46			A collection of objects used to manage the Control Protocol Disposition version 2 function.
f3AclRuleGroup	1.3.6.1.4.1.2544.1.12.4.2.2.47			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint ACL Rule.
f3EthernetTrafficPortExpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.48			A collection of objects used to manage the F3 Ethernet Traffic Port Exp De Decoding/Encoding group function.
f3XdslAndPpppoeParamGroup	1.3.6.1.4.1.2544.1.12.4.2.2.49			A collection of objects used to manage the F3 Ethernet Traffic Port XDSL Parameter.
sciPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.50			A collection of objects used to manage the SCI port.
cmTrafficPortQosShaperGroup	1.3.6.1.4.1.2544.1.12.4.2.2.51			A collection of objects used to manage the Ethernet Traffic Port QOS Shaper.
f3IrigPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.52			A collection of objects used to manage IRIG Card and Port.
ccGroup	1.3.6.1.4.1.2544.1.12.4.2.2.53			A collection of objects used to manage the CC Card.
cmEncapFlowPointGroup	1.3.6.1.4.1.2544.1.12.4.2.2.54			A collection of objects used to manage the encap flow point entry Group.

AclNoMatchDispositionType (1)
ACL cmFlowPointAclNoMatchDisposition	1.3.6.1.4.1.2544.1.12.4.1.29.1.58	AclNoMatchDispositionType	read-write	This attribute allows specify ACL no match disposition type
AclRuleOperation (1)
ACL f3AclRuleOperation	1.3.6.1.4.1.2544.1.12.4.1.99.1.5	AclRuleOperation	read-write	The ACL rule action.
AdminState (42)
ADM bits8PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.78.1.3	AdminState	read-write	This object represents the Administrative State of the BITS 8 Port Group.
ADM bitsPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.16.1.5	AdminState	read-write	This object represents the Administrative State of the BITS Port.
ADM ccInputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.111.1.5	AdminState	read-write	This object represents the Administrative State of the CC input Port.
ADM clk16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.80.1.3	AdminState	read-only	This object represents the Administrative State of the Pulse Per Second Port.
ADM cmAccPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.12.1.3	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
ADM cmElineFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.28.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
ADM cmEthernetAccPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.1.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Access Port.
ADM cmEthernetMgmtPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.9.1.3	AdminState	read-write	This object represents the Administrative State of the Ethernet Management Port.
ADM cmEthernetNetPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.7.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Network Port.
ADM cmEthernetTrafficPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.27.1.4	AdminState	read-write	This object represents the Administrative State of the Ethernet Port.
ADM cmFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.4.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
ADM cmFlowPointAdminState	1.3.6.1.4.1.2544.1.12.4.1.29.1.3	AdminState	read-write	This object represents the Administrative State of the FlowPoint.
ADM cmMPFlowAdminState	1.3.6.1.4.1.2544.1.12.4.1.60.1.3	AdminState	read-write	This object represents the Administrative State of the Flow.
ADM cmOAMFlowPointAdminState	1.3.6.1.4.1.2544.1.12.4.1.30.1.3	AdminState	read-write	This object represents the Administrative State of the OAMFlowPoint.
ADM cmQosFlowPolicerAdminState	1.3.6.1.4.1.2544.1.12.4.1.11.1.4	AdminState	read-write	This object represents the Administrative State of the QOS Flow Policer.
ADM cmQosPolicerV2AdminState	1.3.6.1.4.1.2544.1.12.4.1.41.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Policer.
ADM cmQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.6.1.4	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
ADM cmQosShaperV2AdminState	1.3.6.1.4.1.2544.1.12.4.1.42.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
ADM cmTrafficPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.43.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
ADM e1t1AdminState	1.3.6.1.4.1.2544.1.12.4.1.50.1.5	AdminState	read-write	This object represents the Administrative State of the E1/T1.
ADM e3t3AdminState	1.3.6.1.4.1.2544.1.12.4.1.51.1.5	AdminState	read-write	This object represents the Administrative State of the E3/T3.
ADM f3AclRuleAdminState	1.3.6.1.4.1.2544.1.12.4.1.99.1.2	AdminState	read-write	This object allows user configure the Acl Rule in-service or management state.
ADM f3FpQosPolicerAdminState	1.3.6.1.4.1.2544.1.12.4.1.96.1.2	AdminState	read-create	This object represents the Administrative State of a Policer.
ADM f3FpQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.95.1.2	AdminState	read-create	This object represents the Administrative State of a Shaper.
ADM f3GPSReceiverPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.57.1.4	AdminState	read-write	This object represents the Administrative State of the GPS Receiver Port.
ADM f3IrigOpticalOutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.107.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
ADM f3IrigOutputUnitPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.110.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
ADM f3IrigRelayOutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.108.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
ADM f3IrigRs422OutputPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.106.1.5	AdminState	read-write	This object represents the administrative state of the IRIG output port.
ADM f3NetPortQosShaperAdminState	1.3.6.1.4.1.2544.1.12.4.1.45.1.3	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
ADM f3PulsePerSecondPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.53.1.4	AdminState	read-write	This object represents the Administrative State of the Pulse Per Second Port.
ADM f3TimeOfDayPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.55.1.4	AdminState	read-write	This object represents the Administrative State of the Time Of Day Port.
ADM f3Usb3GDCNPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.46.1.4	AdminState	read-write	This object represents the Administrative State of the G3 DCN Port.
ADM f3UsbWIFIDonglePortAdminState	1.3.6.1.4.1.2544.1.12.4.1.77.1.4	AdminState	read-write	This object represents the Administrative State of this Port.
ADM gps10MHzPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.18.1.4	AdminState	read-write	This object represents the Administrative State of the Port.
ADM ieee1588EthernetPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.17.1.4	AdminState	read-write	This object represents the Administrative State of the Port.
ADM ocnStmAdminState	1.3.6.1.4.1.2544.1.12.4.1.47.1.4	AdminState	read-write	This object represents the Administrative State of the OCn/STM interface.
ADM pps16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.79.1.3	AdminState	read-only	This object represents the Administrative State of the Pulse Per Second Port.
ADM sciPortAdminState	1.3.6.1.4.1.2544.1.12.4.1.105.1.2	AdminState	read-write	This object represents the Administrative State of the SCI Port.
ADM stsVcPathAdminState	1.3.6.1.4.1.2544.1.12.4.1.48.1.4	AdminState	read-write	This object represents the Administrative State of the OCn Path.
ADM todPps16PortGroupAdminState	1.3.6.1.4.1.2544.1.12.4.1.81.1.3	AdminState	read-only	This object represents the Administrative State of the Time Of Day Port.
ADM vtVcPathAdminState	1.3.6.1.4.1.2544.1.12.4.1.49.1.4	AdminState	read-write	This object represents the Administrative State of the OCn VT1.5/VC12.
AfpTagControl (1)
AFP cmEthernetTrafficPortTagFrameControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.64	AfpTagControl	read-write	This object defines if c-tag/s-tag frame is allowed to pass through, available only when AFP is set to Tagged.
BandwidthProfileMode (1)
BAN neTMParamsBandwidthProfileMode	1.3.6.1.4.1.2544.1.12.4.1.66.1.1	BandwidthProfileMode	read-create	A Network Element level Bandwidth Profile Mode shall be supported which will indicate if the CIR/EIR is interpreted as Information Rate (IR) or Line Rate (LR). In IR mode BWP is enforced based on number of bytes beginning with DA and ending with FCS as it was received at a port which is called the Service Frame in MEF terminology. In LR mode the BWP is enforced based on the whole frame including IFG, Preamble and SFD.
BitErrRate (6)
BIT ocnStmBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.47.1.23	BitErrRate	read-write	This object provides the threshold of B2DEG.
BIT ocnStmBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.47.1.22	BitErrRate	read-write	This object provide the threshold of B2EXC.
BIT stsVcPathBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.48.1.12	BitErrRate	read-write	This object provides the threshold of B3DEG.
BIT stsVcPathBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.48.1.11	BitErrRate	read-write	This object provide the threshold of B3EXC.
BIT vtVcPathBerDegThreshold	1.3.6.1.4.1.2544.1.12.4.1.49.1.12	BitErrRate	read-write	This object provides the threshold of BERDEG.
BIT vtVcPathBerExcThreshold	1.3.6.1.4.1.2544.1.12.4.1.49.1.11	BitErrRate	read-write	This object provide the threshold of BEREXC.
BitsFrameFormat (2)
BIT bits8PortGroupFrameFormat	1.3.6.1.4.1.2544.1.12.4.1.78.1.8	BitsFrameFormat	read-write	This object represents the BITS 8 Port Group Frame Format. When the group is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When the group is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. When the group is configured for a Line Type of 2048kHz, the value is none. R4.1CC and R4.3CC do not support e1-unframed.
BIT bitsPortFrameFormat	1.3.6.1.4.1.2544.1.12.4.1.16.1.11	BitsFrameFormat	read-write	This object represents the BITS Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When the port is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. When the port is configured for a Line Type of 2048kHz, the value is none. R4.1CC and R4.3CC do not support e1-unframed.
BitsPortImpedanceMode (2)
BIT bits8PortGroupImpedance	1.3.6.1.4.1.2544.1.12.4.1.78.1.14	BitsPortImpedanceMode	read-write	This object provides the line impedance mode for the BITS 8 Port Group.
BIT bitsPortImpedance	1.3.6.1.4.1.2544.1.12.4.1.16.1.20	BitsPortImpedanceMode	read-only	This object provides the impedance mode for the BITS-OUT port.
BitsPortLineCode (2)
BIT bits8PortGroupLineCode	1.3.6.1.4.1.2544.1.12.4.1.78.1.7	BitsPortLineCode	read-write	This object represents the BITS 8 Port Group Line Code. When the group is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the group is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3. When the group is configured for a Line Type of 2048kHz, the value is none.
BIT bitsPortLineCode	1.3.6.1.4.1.2544.1.12.4.1.16.1.10	BitsPortLineCode	read-write	This object represents the BITS Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the port is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3. When the port is configured for a Line Type of 2048kHz, the value is none.
BitsPortLineType (2)
BIT bits8PortGroupLineType	1.3.6.1.4.1.2544.1.12.4.1.78.1.6	BitsPortLineType	read-write	This object represents the BITS 8 Port Group Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode.
BIT bitsPortLineType	1.3.6.1.4.1.2544.1.12.4.1.16.1.9	BitsPortLineType	read-write	This object represents the BITS Port Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode.
BitsPortType (1)
BIT bitsPortType	1.3.6.1.4.1.2544.1.12.4.1.16.1.8	BitsPortType	read-only	This object represents the BITS Port Type.
CcActivePortState (1)
CCA ccGroupActivePorts	1.3.6.1.4.1.2544.1.12.4.1.112.1.5	CcActivePortState	read-write	This object represents the Active State for each port of the CC 10 output port Group.
CcPortDutyCycle (1)
CCP ccGroupDutyCycle	1.3.6.1.4.1.2544.1.12.4.1.112.1.7	CcPortDutyCycle	read-write	63/37 or 50/50 duty cycles.
ChannelType (1)
CHA cmEthernetTrafficPortPlugChannelType	1.3.6.1.4.1.2544.1.12.4.1.27.1.156	ChannelType	read-write	This specifies plug's type channel configuration.
ClkSignalType (1)
CLK gps10MHzPortInputSignalType	1.3.6.1.4.1.2544.1.12.4.1.18.1.16	ClkSignalType	read-write	This object allows specification of the input signal type (i.e. 10mhz or 2048khz).
CmAclConfiguration (1)
CMA cmTrafficAclRscAllocation	1.3.6.1.4.1.2544.1.12.4.1.44	CmAclConfiguration	read-write	This object is defined to set traffic acl resource allocation. Supported actions are: all-bk-l2(1) - all bank allocated to l2. all-bk-l2-ipv4(2) - all bank allocated to l2/ipv4. two-bk-l2-ipv4(3) - two thirds allocated to l2/ipv4, the left belongs to ipv6. one-bk-l2-ipv4(4) - one thirds allocated to l2/ipv4, the left belongs to ipv6. none-bk-l2-ipv4(5) - all bank allocated to ipv6.
CmActiveControlProtocolsType (2)
CMA cmFlowCpdV2ActiveControlProtocols	1.3.6.1.4.1.2544.1.12.4.1.14.1.27	CmActiveControlProtocolsType	read-only	List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
CMA f3FlowPointCpdV2ActiveControlProtocols	1.3.6.1.4.1.2544.1.12.4.1.98.1.23	CmActiveControlProtocolsType	read-only	List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions.
CmAfpType (3)
CMA cmEthernetAccPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.1.1.69	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet Access port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames.
CMA cmEthernetNetPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.7.1.67	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet Network port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames. This object is not applicable for FSP150CC Release 4.1 products.
CMA cmEthernetTrafficPortAfpType	1.3.6.1.4.1.2544.1.12.4.1.27.1.59	CmAfpType	read-write	This object allows specification of the Acceptable Frame Policy on Ethernet port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames.
CmControlProtocolDispType (330)
CMC cmEthernetAccPortCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.2.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
CMC cmEthernetAccPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetAccPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetAccPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetAccPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetAccPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetAccPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetAccPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetAccPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetAccPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC cmEthernetAccPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetAccPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetAccPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetAccPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC cmEthernetAccPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetAccPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmEthernetAccPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetAccPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetAccPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetAccPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetAccPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetAccPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetAccPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetAccPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetAccPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetAccPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetAccPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetAccPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetAccPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetAccPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetAccPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetAccPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetAccPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetAccPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetAccPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetAccPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetAccPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetAccPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetAccPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetAccPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetAccPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetAccPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
CMC cmEthernetAccPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.49	CmControlProtocolDispType	read-write	PTP untagged frame Disposition type.
CMC cmEthernetAccPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetAccPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmEthernetAccPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetAccPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetAccPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetAccPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.13.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmEthernetAccPortOamAdminDisposition	1.3.6.1.4.1.2544.1.12.4.1.1.1.50	CmControlProtocolDispType	read-write	Ethernet Access Port's EFM OAM Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
CMC cmEthernetAccPortRxPauseDisposition	1.3.6.1.4.1.2544.1.12.4.1.1.1.67	CmControlProtocolDispType	read-write	This object allows management of RX pause frames on Ethernet Access port. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
CMC cmEthernetNetPortCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.8.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
CMC cmEthernetNetPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetNetPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetNetPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetNetPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetNetPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetNetPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetNetPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetNetPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetNetPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC cmEthernetNetPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetNetPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetNetPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetNetPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC cmEthernetNetPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetNetPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmEthernetNetPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetNetPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetNetPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetNetPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetNetPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetNetPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetNetPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetNetPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetNetPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetNetPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetNetPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetNetPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetNetPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetNetPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetNetPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetNetPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetNetPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetNetPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetNetPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetNetPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetNetPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetNetPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetNetPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetNetPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetNetPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetNetPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
CMC cmEthernetNetPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.49	CmControlProtocolDispType	read-write	PTP non forwarding untagged frame Disposition type.
CMC cmEthernetNetPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetNetPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmEthernetNetPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetNetPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetNetPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetNetPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.15.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmEthernetNetPortOamAdminDisposition	1.3.6.1.4.1.2544.1.12.4.1.7.1.50	CmControlProtocolDispType	read-write	Ethernet Network Port's EFM OAM Administrative Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables.
CMC cmEthernetNetPortRxPauseDisposition	1.3.6.1.4.1.2544.1.12.4.1.7.1.65	CmControlProtocolDispType	read-write	This object allows enabling/disabling receive pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products.
CMC cmEthernetTrafficPortCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmEthernetTrafficPortCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmEthernetTrafficPortCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmEthernetTrafficPortCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmEthernetTrafficPortCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmEthernetTrafficPortCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmEthernetTrafficPortCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmEthernetTrafficPortCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.28	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC cmEthernetTrafficPortCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmEthernetTrafficPortCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmEthernetTrafficPortCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmEthernetTrafficPortCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC cmEthernetTrafficPortCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmEthernetTrafficPortCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmEthernetTrafficPortCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmEthernetTrafficPortCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmEthernetTrafficPortCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmEthernetTrafficPortCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.27	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmEthernetTrafficPortCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmEthernetTrafficPortCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmEthernetTrafficPortCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmEthernetTrafficPortCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmEthernetTrafficPortCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmEthernetTrafficPortCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmEthernetTrafficPortCpdV2PtpTaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.50	CmControlProtocolDispType	read-write	PTP tagged frame Disposition type.
CMC cmEthernetTrafficPortCpdV2PtpUntaggedDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.49	CmControlProtocolDispType	read-write	PTP untagged frame Disposition type.
CMC cmEthernetTrafficPortCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmEthernetTrafficPortCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmEthernetTrafficPortCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmEthernetTrafficPortCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmEthernetTrafficPortCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmEthernetTrafficPortCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.97.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmFlowCpdDispType	1.3.6.1.4.1.2544.1.12.4.1.5.1.4	CmControlProtocolDispType	read-write	This enables specification of disposion type of CPD Filter.
CMC cmFlowCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmFlowCpdV2BridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.13	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmFlowCpdV2BridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.21	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmFlowCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmFlowCpdV2CiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.2	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmFlowCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.48	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC cmFlowCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmFlowCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmFlowCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.29	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC cmFlowCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.26	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmFlowCpdV2GARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.23	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmFlowCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.24	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmFlowCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC cmFlowCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmFlowCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmFlowCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmFlowCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmFlowCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.22	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmFlowCpdV2LLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00.
CMC cmFlowCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmFlowCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmFlowCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmFlowCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmFlowCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmFlowCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmFlowCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmFlowCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmFlowCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmFlowCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmFlowCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmFlowCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmFlowCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmFlowCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmFlowCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmFlowCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmFlowCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.46	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC cmFlowCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.47	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC cmFlowCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmFlowCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmFlowCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmFlowCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmFlowCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmFlowCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmFlowCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmFlowCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmFlowCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.14.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmFlowPointCpdProfileBPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmFlowPointCpdProfileBridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.14	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmFlowPointCpdProfileBridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.22	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmFlowPointCpdProfileCdpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmFlowPointCpdProfileCiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.3	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmFlowPointCpdProfileCustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.49	CmControlProtocolDispType	read-write	The customer lldp Disposition type.
CMC cmFlowPointCpdProfileDtpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmFlowPointCpdProfileEfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmFlowPointCpdProfileELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.50	CmControlProtocolDispType	read-write	The ELMI Disposition type.
CMC cmFlowPointCpdProfileGARPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.27	CmControlProtocolDispType	read-write	Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmFlowPointCpdProfileGARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.24	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmFlowPointCpdProfileGMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmFlowPointCpdProfileGVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.26	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22).
CMC cmFlowPointCpdProfileIslDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmFlowPointCpdProfileL2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmFlowPointCpdProfileLACPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmFlowPointCpdProfileLACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmFlowPointCpdProfileLANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.23	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmFlowPointCpdProfileLldpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP.
CMC cmFlowPointCpdProfileMac00DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmFlowPointCpdProfileMac01DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmFlowPointCpdProfileMac02DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmFlowPointCpdProfileMac03DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmFlowPointCpdProfileMac04DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmFlowPointCpdProfileMac05DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmFlowPointCpdProfileMac06DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmFlowPointCpdProfileMac07DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmFlowPointCpdProfileMac08DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmFlowPointCpdProfileMac09DispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmFlowPointCpdProfileMac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmFlowPointCpdProfileMac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmFlowPointCpdProfileMac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmFlowPointCpdProfileMac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmFlowPointCpdProfileMac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmFlowPointCpdProfileMac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.46	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmFlowPointCpdProfileNearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.47	CmControlProtocolDispType	read-write	The nearest lldp Disposition type.
CMC cmFlowPointCpdProfileNonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.48	CmControlProtocolDispType	read-write	The non tp mr lldp Disposition type.
CMC cmFlowPointCpdProfilePagpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmFlowPointCpdProfilePauseDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmFlowPointCpdProfilePortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmFlowPointCpdProfilePvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmFlowPointCpdProfileSSMDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmFlowPointCpdProfileUdldDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmFlowPointCpdProfileUplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmFlowPointCpdProfileVlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmFlowPointCpdProfileVtpDispType	1.3.6.1.4.1.2544.1.12.4.1.34.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC cmPortCpdProfileBPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC cmPortCpdProfileBridgeGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.14	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.
CMC cmPortCpdProfileBridgeReservedDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.22	CmControlProtocolDispType	read-write	Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.
CMC cmPortCpdProfileCdpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC cmPortCpdProfileCiscoGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.3	CmControlProtocolDispType	read-write	Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting.
CMC cmPortCpdProfileCustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.49	CmControlProtocolDispType	read-write	The customer lldp Disposition type.
CMC cmPortCpdProfileDtpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC cmPortCpdProfileEfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC cmPortCpdProfileELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.50	CmControlProtocolDispType	read-write	The ELMI Disposition type.
CMC cmPortCpdProfileGARPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.27	CmControlProtocolDispType	read-write	Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.
CMC cmPortCpdProfileGARPGroupDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.24	CmControlProtocolDispType	read-write	Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC cmPortCpdProfileGMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.25	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC cmPortCpdProfileGVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.26	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22).
CMC cmPortCpdProfileIslDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC cmPortCpdProfileL2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC cmPortCpdProfileLACPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC cmPortCpdProfileLACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC cmPortCpdProfileLANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.23	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC cmPortCpdProfileLldpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.28	CmControlProtocolDispType	read-write	Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP.
CMC cmPortCpdProfileMac00DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC cmPortCpdProfileMac01DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC cmPortCpdProfileMac02DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC cmPortCpdProfileMac03DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC cmPortCpdProfileMac04DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC cmPortCpdProfileMac05DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC cmPortCpdProfileMac06DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC cmPortCpdProfileMac07DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC cmPortCpdProfileMac08DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC cmPortCpdProfileMac09DispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC cmPortCpdProfileMac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.41	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC cmPortCpdProfileMac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.42	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC cmPortCpdProfileMac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.43	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC cmPortCpdProfileMac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.44	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC cmPortCpdProfileMac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.45	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC cmPortCpdProfileMac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.46	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC cmPortCpdProfileNearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.47	CmControlProtocolDispType	read-write	The nearest lldp Disposition type.
CMC cmPortCpdProfileNonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.48	CmControlProtocolDispType	read-write	The non tp mr lldp Disposition type.
CMC cmPortCpdProfilePagpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC cmPortCpdProfilePauseDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC cmPortCpdProfilePortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC cmPortCpdProfilePvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC cmPortCpdProfileSSMDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC cmPortCpdProfileUdldDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC cmPortCpdProfileUplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC cmPortCpdProfileVlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC cmPortCpdProfileVtpDispType	1.3.6.1.4.1.2544.1.12.4.1.33.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CMC f3FlowPointCpdV2BPDUDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.12	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).
CMC f3FlowPointCpdV2CdpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.5	CmControlProtocolDispType	read-write	Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).
CMC f3FlowPointCpdV2CustomerLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.43	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.
CMC f3FlowPointCpdV2DtpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.7	CmControlProtocolDispType	read-write	Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).
CMC f3FlowPointCpdV2EfmOamDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.16	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).
CMC f3FlowPointCpdV2ELMIDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.24	CmControlProtocolDispType	read-write	ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.
CMC f3FlowPointCpdV2GARPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.22	CmControlProtocolDispType	read-write	Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.
CMC f3FlowPointCpdV2GMRPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.20	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).
CMC f3FlowPointCpdV2GVRPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.21	CmControlProtocolDispType	read-write	Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).
CMC f3FlowPointCpdV2IslDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.2	CmControlProtocolDispType	read-write	Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).
CMC f3FlowPointCpdV2L2PTDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.11	CmControlProtocolDispType	read-write	Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).
CMC f3FlowPointCpdV2LACPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.14	CmControlProtocolDispType	read-write	Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).
CMC f3FlowPointCpdV2LACPMarkerDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.15	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).
CMC f3FlowPointCpdV2LANBridgesDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.19	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).
CMC f3FlowPointCpdV2Mac00DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.25	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:00 Disposition type.
CMC f3FlowPointCpdV2Mac01DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.26	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:01 Disposition type.
CMC f3FlowPointCpdV2Mac02DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.27	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:02 Disposition type.
CMC f3FlowPointCpdV2Mac03DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.28	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:03 Disposition type.
CMC f3FlowPointCpdV2Mac04DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.29	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:04 Disposition type.
CMC f3FlowPointCpdV2Mac05DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.30	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:05 Disposition type.
CMC f3FlowPointCpdV2Mac06DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.31	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:06 Disposition type.
CMC f3FlowPointCpdV2Mac07DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.32	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:07 Disposition type.
CMC f3FlowPointCpdV2Mac08DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.33	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:08 Disposition type.
CMC f3FlowPointCpdV2Mac09DispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.34	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:09 Disposition type.
CMC f3FlowPointCpdV2Mac0ADispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.35	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0A Disposition type.
CMC f3FlowPointCpdV2Mac0BDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.36	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0B Disposition type.
CMC f3FlowPointCpdV2Mac0CDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.37	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0C Disposition type.
CMC f3FlowPointCpdV2Mac0DDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.38	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0D Disposition type.
CMC f3FlowPointCpdV2Mac0EDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.39	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0E Disposition type.
CMC f3FlowPointCpdV2Mac0FDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.40	CmControlProtocolDispType	read-write	MAC Address 01:80:C2:00:00:0F Disposition type.
CMC f3FlowPointCpdV2NearestLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.41	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.
CMC f3FlowPointCpdV2NonTpmrLLDPDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.42	CmControlProtocolDispType	read-write	LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.
CMC f3FlowPointCpdV2PagpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.3	CmControlProtocolDispType	read-write	Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).
CMC f3FlowPointCpdV2PauseDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.13	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).
CMC f3FlowPointCpdV2PortAuthenDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.18	CmControlProtocolDispType	read-write	Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).
CMC f3FlowPointCpdV2PvstpPlusDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.8	CmControlProtocolDispType	read-write	Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).
CMC f3FlowPointCpdV2SSMDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.17	CmControlProtocolDispType	read-write	Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).
CMC f3FlowPointCpdV2UdldDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.4	CmControlProtocolDispType	read-write	Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).
CMC f3FlowPointCpdV2UplinkFastDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.9	CmControlProtocolDispType	read-write	Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).
CMC f3FlowPointCpdV2VlanBridgeDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.10	CmControlProtocolDispType	read-write	Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).
CMC f3FlowPointCpdV2VtpDispType	1.3.6.1.4.1.2544.1.12.4.1.98.1.6	CmControlProtocolDispType	read-write	Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).
CmControlProtocolFilterType (3)
CMC cmEthernetAccPortCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.2.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
CMC cmEthernetNetPortCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.8.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
CMC cmFlowCpdFilterType	1.3.6.1.4.1.2544.1.12.4.1.5.1.2	CmControlProtocolFilterType	read-only	This enables specification of type of CPD Filter.
CmDiagAutoNegCondType (3)
CMD cmEthernetAccPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.23	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Access Port.
CMD cmEthernetNetPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.23	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Network Port.
CMD cmEthernetTrafficPortDiagnoseAutoNegCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.99	CmDiagAutoNegCondType	read-only	This object provides auto negotiation results of the diagnosis test on Ethernet Traffic Port.
CmDiagCableCondType (12)
CMD cmEthernetAccPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.19	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.20	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.21	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Access Port.
CMD cmEthernetAccPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.1.1.22	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Access Port.
CMD cmEthernetNetPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.19	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.20	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.21	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Network Port.
CMD cmEthernetNetPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.7.1.22	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Network Port.
CMD cmEthernetTrafficPortDiagnosePair1Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.95	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 1 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair2Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.96	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 2 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair3Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.97	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 3 on Ethernet Traffic Port.
CMD cmEthernetTrafficPortDiagnosePair4Cond	1.3.6.1.4.1.2544.1.12.4.1.27.1.98	CmDiagCableCondType	read-only	This object provides diagnosis results for the cable Pair 4 on Ethernet Traffic Port.
CmDiagEfmOamLpbkCondType (3)
CMD cmEthernetAccPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.25	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Access Port.
CMD cmEthernetNetPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.25	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Network Port.
CMD cmEthernetTrafficPortDiagnoseEfmLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.101	CmDiagEfmOamLpbkCondType	read-only	This object provides remote EFM loopback results of the diagnosis test on Ethernet Traffic Port.
CmDiagLpbkCondType (3)
CMD cmEthernetAccPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.1.1.24	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Access Port.
CMD cmEthernetNetPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.7.1.24	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Network Port.
CMD cmEthernetTrafficPortDiagnoseLpbkCond	1.3.6.1.4.1.2544.1.12.4.1.27.1.100	CmDiagLpbkCondType	read-only	This object provides port loopback results of the diagnosis test on Ethernet Traffic Port.
CmDiagTestStatus (3)
CMD cmEthernetAccPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.27	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Access Port.
CMD cmEthernetNetPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.27	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Access Port.
CMD cmEthernetTrafficPortDiagnoseTestStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.103	CmDiagTestStatus	read-only	This object provides the current status of the diagnosis test on Ethernet Traffic Port.
CmEthernetDiagAction (3)
CME cmEthernetAccPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.1.1.18	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Access Port.
CME cmEthernetNetPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.7.1.18	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Network Port.
CME cmEthernetTrafficPortInitiateDiag	1.3.6.1.4.1.2544.1.12.4.1.27.1.94	CmEthernetDiagAction	read-write	This object allows to initiate Etherjack diagnosis on the Ethernet Traffic Port.
CmEthernetMDIXType (9)
CME cmEthernetAccPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.70	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Access port.
CME cmEthernetAccPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.1.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Access Port.
CME cmEthernetMgmtPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.9.1.10	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Management port.
CME cmEthernetMgmtPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.9.1.9	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Management Port.
CME cmEthernetNetPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.68	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet Network port.
CME cmEthernetNetPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.7.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Network Port.
CME cmEthernetTrafficPortMDIXStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.12	CmEthernetMDIXType	read-only	This object provides the current MDIX status of the Ethernet port.
CME cmEthernetTrafficPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.27.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Ethernet Port.
CME ieee1588EthernetPortMDIXType	1.3.6.1.4.1.2544.1.12.4.1.17.1.11	CmEthernetMDIXType	read-write	This object allows management of MDIX property on Port.
CmEthernetSvcPortMode (2)
CME cmEthernetAccPortMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.65	CmEthernetSvcPortMode	read-write	This object allows specification of whether the Ethernet Access Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offering MAC based services) mode.
CME cmEthernetTrafficPortMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.115	CmEthernetSvcPortMode	read-write	This object allows specification of whether the Ethernet Traffic Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offering MAC based services) mode.
CmEthernetSvcType (2)
CME cmEthernetAccPortSvcType	1.3.6.1.4.1.2544.1.12.4.1.1.1.66	CmEthernetSvcType	read-write	This object allows specification of whether the Ethernet Access Port provides transparent port based services, or multi-flow VLAN based services.
CME cmEthernetTrafficPortServiceType	1.3.6.1.4.1.2544.1.12.4.1.27.1.116	CmEthernetSvcType	read-write	This object allows specification of whether the Ethernet Traffic Port provides transparent port based services, or multi-flow VLAN based services.
CmEthernetTrafficSvcType (1)
CME cmEthernetTrafficPortSvcType	1.3.6.1.4.1.2544.1.12.4.1.27.1.56	CmEthernetTrafficSvcType	read-write	This object allows specification of whether the Ethernet Port is port based or vlan based.
CmFlowType (1)
CMF cmFlowType	1.3.6.1.4.1.2544.1.12.4.1.4.1.6	CmFlowType	read-create	This object represents the type of the Flow.
CmLinkLossFwdSignalType (3)
CML cmEthernetAccPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.1.1.42	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType.
CML cmEthernetNetPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.7.1.42	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetNetPortLinkLossFwdEnabled is enabled. This object is only valid for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType.
CML cmEthernetTrafficPortLinkLossFwdSignalType	1.3.6.1.4.1.2544.1.12.4.1.27.1.30	CmLinkLossFwdSignalType	read-write	This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled.
CmLinkLossFwdTriggerTypes (3)
CML cmEthernetAccPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.1.1.43	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled.
CML cmEthernetNetPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.7.1.43	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled.
CML cmEthernetTrafficPortLinkLossFwdTriggerTypes	1.3.6.1.4.1.2544.1.12.4.1.27.1.31	CmLinkLossFwdTriggerTypes	read-write	This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled.
CmLinkLossFwdTxActionType (3)
CML cmEthernetAccPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.1.1.82	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Access Port's behavior when link loss forwarding trigger events occur on the Network Port. This provides ability to configure per access port LLF behavior.
CML cmEthernetNetPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.7.1.78	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Network Port's behavior when link loss forwarding trigger events occur on the Access Port.
CML cmEthernetTrafficPortLinkLossFwdTxActionType	1.3.6.1.4.1.2544.1.12.4.1.27.1.37	CmLinkLossFwdTxActionType	read-write	This object allows to specify the Ethernet Port's behavior when link loss forwarding trigger events occur on the Port. This provides ability to configure per Ethernet port LLF behavior.
CmLoopbackType (18)
CML cmEthernetAccPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.1.1.29	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Access Port.
CML cmEthernetAccPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.30	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Access Port.
CML cmEthernetNetPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.7.1.29	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Network Port.
CML cmEthernetNetPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.7.1.30	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Network Port.
CML cmEthernetTrafficPortLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.27.1.21	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the Ethernet Port.
CML cmEthernetTrafficPortLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.22	CmLoopbackType	read-only	This object provides status of the current loopback on the Ethernet Port.
CML cmEthernetTrafficPortLpbkConfig	1.3.6.1.4.1.2544.1.12.4.1.69.1.8	CmLoopbackType	read-write	This object represent the vlan loopback action.
CML cmEthernetTrafficPortLpbkStatus	1.3.6.1.4.1.2544.1.12.4.1.69.1.7	CmLoopbackType	read-only	This object represent the vlan loopback status.
CML e1t1LoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.50.1.8	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the E1/T1.
CML e1t1LoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.50.1.9	CmLoopbackType	read-only	This object provides status of the current loopback on the E1/T1.
CML e3t3LoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.51.1.8	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the E3/T3.
CML e3t3LoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.51.1.9	CmLoopbackType	read-only	This object provides status of the current loopback on the E3/T3.
CML ocnStmLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.47.1.18	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn/STM interface.
CML ocnStmLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.47.1.19	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn/STM interface.
CML stsVcPathLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.48.1.7	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn Path.
CML stsVcPathLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.48.1.8	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn Path.
CML vtVcPathLoopbackConfig	1.3.6.1.4.1.2544.1.12.4.1.49.1.7	CmLoopbackType	read-write	This object allows to initiate loopbacks on on the OCn VT1.5/VC12.
CML vtVcPathLoopbackStatus	1.3.6.1.4.1.2544.1.12.4.1.49.1.8	CmLoopbackType	read-only	This object provides status of the current loopback on the OCn VT1.5/VC12.
CmOamAdminState (3)
CMO cmEthernetAccPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.1.1.75	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
CMO cmEthernetNetPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.7.1.73	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
CMO cmEthernetTrafficPortOamAdminState	1.3.6.1.4.1.2544.1.12.4.1.27.1.55	CmOamAdminState	read-only	This object provides the EFM OAM Admin State.
CmOamDiscoveryState (3)
CMO cmEthernetAccPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.1.1.51	CmOamDiscoveryState	read-only	Ethernet Access Port's OAM discovery state.
CMO cmEthernetNetPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.7.1.51	CmOamDiscoveryState	read-only	Ethernet Network Port's OAM discovery state.
CMO cmEthernetTrafficPortOamDiscoveryState	1.3.6.1.4.1.2544.1.12.4.1.27.1.40	CmOamDiscoveryState	read-only	Ethernet Port's OAM discovery state.
CmOamMode (6)
CMO cmEthernetAccPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.57	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
CMO cmEthernetAccPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.64	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
CMO cmEthernetNetPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.57	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
CMO cmEthernetNetPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.64	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
CMO cmEthernetTrafficPortOamLocalMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.46	CmOamMode	read-write	This object allows to configure the OAM sublayer entity in either Active or Passive mode.
CMO cmEthernetTrafficPortOamRemoteMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.53	CmOamMode	read-only	This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
CmRemoteLinkIds (4)
CMR cmEthernetAccPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.1.1.48	CmRemoteLinkIds	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet access port. By setting the appropriate bit positions, the Ethernet access port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end.
CMR cmEthernetAccPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.1.1.83	CmRemoteLinkIds	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Access Port.
CMR cmEthernetNetPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.7.1.48	CmRemoteLinkIds	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet Network port. By setting the appropriate bit positions, the Ethernet Network port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end.
CMR cmEthernetNetPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.7.1.79	CmRemoteLinkIds	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Network Port.
CmSwapSADAType (3)
CMS cmEthernetAccPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.1.1.32	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
CMS cmEthernetNetPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.7.1.32	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
CMS cmEthernetTrafficPortLoopbackSwapSADA	1.3.6.1.4.1.2544.1.12.4.1.27.1.24	CmSwapSADAType	read-write	This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
CmTrafficAclFilterActionType (1)
CMT cmTrafficAclFilterAction	1.3.6.1.4.1.2544.1.12.4.1.38.1.2	CmTrafficAclFilterActionType	read-write	Currently, 'permit' and 'deny' are supported.
CmTrafficAclFilterType (1)
CMT cmTrafficAclFilterType	1.3.6.1.4.1.2544.1.12.4.1.38.1.3	CmTrafficAclFilterType	read-write	This object describes the Acl filter type.
CmTrafficACLPriorityType (1)
CMT cmTrafficAclIpQosType	1.3.6.1.4.1.2544.1.12.4.1.38.1.25	CmTrafficACLPriorityType	read-write	This object describes QosType Acl entry.
CmTrafficAclProtocolType (1)
CMT cmTrafficAclProtocolType	1.3.6.1.4.1.2544.1.12.4.1.38.1.32	CmTrafficAclProtocolType	read-write	This object describes protocol type of Acl entry.
ConstellationType (1)
CON f3GPSReceiverPortGnssSystem	1.3.6.1.4.1.2544.1.12.4.1.57.1.14	ConstellationType	read-write	This object configure Constellation Type of the GPS Antenna.
ConstellationTypesBitMap (2)
CON f3GPSReceiverPortGnssSystemsBitMap	1.3.6.1.4.1.2544.1.12.4.1.57.1.17	ConstellationTypesBitMap	read-write	This object configures GNSS constellation types supported by a GNSS Receiver Port
CON f3SatelliteSVType	1.3.6.1.4.1.2544.1.12.4.1.93.1.4	ConstellationTypesBitMap	read-only	This object indicates the Satellite Entry Constellation Type.
CosMappingMode (1)
COS cmPrioMapV2ProfileCosMapModeType	1.3.6.1.4.1.2544.1.12.4.1.70.1.7	CosMappingMode	read-write	This object is used to specify Cos mapping mode type.
Counter64 (2)
C64 cmQosShaperV2ActualCIR	1.3.6.1.4.1.2544.1.12.4.1.42.1.16	Counter64	read-only	This object specifies the actual CIR.
C64 cmQosShaperV2ActualEIR	1.3.6.1.4.1.2544.1.12.4.1.42.1.17	Counter64	read-only	This object specifies the actual EIR.
DateAndTime (9)
DAT cmEthernetAccPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.1.1.28	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
DAT cmEthernetAccPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.1.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
DAT cmEthernetNetPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.7.1.28	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
DAT cmEthernetNetPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.7.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
DAT cmEthernetTrafficPortDiagnoseTestTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.104	DateAndTime	read-only	This object provides the time when diagnosis test was last executed.
DAT cmEthernetTrafficPortRemoteSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.27.1.169	DateAndTime	read-only	This object provides the date of manufacture of the Remote SFP.
DAT cmEthernetTrafficPortSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.27.1.16	DateAndTime	read-only	This object provides the date of manufacture of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
DAT f3GPSReceiverPortGnssTOD	1.3.6.1.4.1.2544.1.12.4.1.57.1.16	DateAndTime	read-only	This object provides the last time was executed.
DAT ocnStmSfpDateOfManufacture	1.3.6.1.4.1.2544.1.12.4.1.47.1.10	DateAndTime	read-only	This object provides the date of manufacture of the SFP.
DeiOuterTagType (6)
DEI cmEthernetAccPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.1.1.108	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
DEI cmEthernetAccPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.1.1.109	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
DEI cmEthernetNetPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.7.1.100	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
DEI cmEthernetNetPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.7.1.101	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
DEI cmEthernetTrafficPortRxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.27.1.113	DeiOuterTagType	read-write	This object allows to specify the Receive DEI Outer Tag Type.
DEI cmEthernetTrafficPortTxDeiOuterTagType	1.3.6.1.4.1.2544.1.12.4.1.27.1.114	DeiOuterTagType	read-write	This object allows to specify the Transmit DEI Outer Tag Type.
DelayOption (1)
DEL f3GPSReceiverPortAntennaDelayType	1.3.6.1.4.1.2544.1.12.4.1.57.1.20	DelayOption	read-write	This object configures GNSS antenna cable delay type (units)
DHCPType (1)
DHC f3UsbWIFIDonglePortWIFIDHCPRole	1.3.6.1.4.1.2544.1.12.4.1.77.1.12	DHCPType	read-only	The DHCP role type of this port.
DisplayString (135)
STR ccGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.112.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the group entity.
STR ccInputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.111.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the input port entity.
STR clk16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.80.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
STR cmElineFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.28.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the Flow.
STR cmEncapFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.113.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the FlowPoint.
STR cmEthernetAccPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.3.1.4	DisplayString	read-write	A textual string containing description of cable span.
STR cmEthernetAccPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.3.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
STR cmEthernetAccPortCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.2.1.3	DisplayString	read-only	This provides description of CPD Filter.
STR cmEthernetAccPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.1.1.26	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Access Port.
STR cmEthernetAccPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.1.1.38	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.1.1.39	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.1.1.40	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.67.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
STR cmEthernetAccPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.1.1.34	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.1.1.35	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.1.1.36	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetAccPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.1.1.133	DisplayString	read-only	This object provides the hardware revision of the SFP.
STR cmEthernetAccPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.1.1.132	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetAccPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.1.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetAccPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.1.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetAccPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.1.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.19.1.4	DisplayString	read-write	A textual string containing description of cable span.
STR cmEthernetNetPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.19.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
STR cmEthernetNetPortCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.8.1.3	DisplayString	read-only	This provides description of CPD Filter.
STR cmEthernetNetPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.7.1.26	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Network Port.
STR cmEthernetNetPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.7.1.38	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.7.1.39	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.7.1.40	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.68.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
STR cmEthernetNetPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.7.1.34	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.7.1.35	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.7.1.36	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetNetPortPppoeRxAcName	1.3.6.1.4.1.2544.1.12.4.1.103.1.12	DisplayString	read-only	The ac name received.
STR cmEthernetNetPortPppoeRxServiceName	1.3.6.1.4.1.2544.1.12.4.1.103.1.13	DisplayString	read-only	The service names received.
STR cmEthernetNetPortPppoeServiceName	1.3.6.1.4.1.2544.1.12.4.1.103.1.9	DisplayString	read-write	The service name requested.
STR cmEthernetNetPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.7.1.128	DisplayString	read-only	This object provides the hardware revision of the SFP.
STR cmEthernetNetPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.7.1.127	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetNetPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.7.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.7.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetNetPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.7.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
STR cmEthernetTrafficPortClbDescr	1.3.6.1.4.1.2544.1.12.4.1.65.1.4	DisplayString	read-write	A textual string containing description of cable span.
STR cmEthernetTrafficPortClbLength	1.3.6.1.4.1.2544.1.12.4.1.65.1.3	DisplayString	read-write	Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional.
STR cmEthernetTrafficPortDiagnoseResult	1.3.6.1.4.1.2544.1.12.4.1.27.1.102	DisplayString	read-only	This object provides results of the diagnosis test in string form on Ethernet Traffic Port.
STR cmEthernetTrafficPortInnerVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.27.1.85	DisplayString	read-write	This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortInnerVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.27.1.86	DisplayString	read-write	This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortInnerVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.27.1.87	DisplayString	read-write	This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortJDSULoopbackVlanList	1.3.6.1.4.1.2544.1.12.4.1.94.1.3	DisplayString	read-only	The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
STR cmEthernetTrafficPortLinkLossFwdRemoteLinkIds	1.3.6.1.4.1.2544.1.12.4.1.27.1.36	DisplayString	read-write	This object allows enabling/disabling Remote Link Ids on Ethernet port. The Ethernet port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end. Input format allows multiple Remote Link Ids seperated by comma (e.g. 1,2,3,10,20...). Number range is product-specific (for EGX8.1, max value is 554). Empty string clears the configuration.
STR cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds	1.3.6.1.4.1.2544.1.12.4.1.27.1.38	DisplayString	read-only	This object provides the received Remote Link IDs in EFM RLD messages on the Ethernet Port.
STR cmEthernetTrafficPortLpbkInnerVlanTag	1.3.6.1.4.1.2544.1.12.4.1.69.1.3	DisplayString	read-write	This object represent the inner vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortLpbkOuterVlanTag	1.3.6.1.4.1.2544.1.12.4.1.69.1.5	DisplayString	read-write	This object represent the outter vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortOuterVlanLoopback1	1.3.6.1.4.1.2544.1.12.4.1.27.1.26	DisplayString	read-write	This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortOuterVlanLoopback2	1.3.6.1.4.1.2544.1.12.4.1.27.1.27	DisplayString	read-write	This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortOuterVlanLoopback3	1.3.6.1.4.1.2544.1.12.4.1.27.1.28	DisplayString	read-write	This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR cmEthernetTrafficPortRemoteSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.27.1.167	DisplayString	read-only	This object provides the hardware revision of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpName	1.3.6.1.4.1.2544.1.12.4.1.27.1.165	DisplayString	read-only	This object provides the official name of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.166	DisplayString	read-only	This object provides the part number of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.168	DisplayString	read-only	This object provides the serial number of the Remote SFP.
STR cmEthernetTrafficPortRemoteSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.27.1.164	DisplayString	read-only	This object provides the vendor name of the Remote SFP.
STR cmEthernetTrafficPortSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.27.1.147	DisplayString	read-only	This object provides the hardware revision of the SFP.
STR cmEthernetTrafficPortSfpName	1.3.6.1.4.1.2544.1.12.4.1.27.1.146	DisplayString	read-only	This object provides the official name of the SFP.
STR cmEthernetTrafficPortSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.14	DisplayString	read-only	This object provides the part number of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
STR cmEthernetTrafficPortSfpRxPowerLevel	1.3.6.1.4.1.2544.1.12.4.1.27.1.144	DisplayString	read-only	This object provides the SFP TX power level in dBm. The format would be [+/-]XX.YYYY. Note: the sign [+/-] and the decimal point (.YYYY) are optional.
STR cmEthernetTrafficPortSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.27.1.15	DisplayString	read-only	This object provides the serial number of the SFP. This is shown only when cmEthernetTrafficPortMediaType is fiber.
STR cmEthernetTrafficPortSfpTxPowerLevel	1.3.6.1.4.1.2544.1.12.4.1.27.1.143	DisplayString	read-only	This object provides the SFP TX power level in dBm. The format would be [+/-]XX.YYYY. Note: the sign [+/-] and the decimal point (.YYYY) are optional.
STR cmEthernetTrafficPortSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.27.1.13	DisplayString	read-only	This object provides the vendor name of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
STR cmEthernetTrafficPortSyncEServiceAvailablePercentage	1.3.6.1.4.1.2544.1.12.4.1.27.1.136	DisplayString	read-only	This object allows to manage service available in percentage [XXX.YY%] for SYNCE.
STR cmFlowActionVlan	1.3.6.1.4.1.2544.1.12.4.1.4.1.19	DisplayString	read-create	This object is applicable only when Port is in connection-oriented evpl mode. This object allows adding/removing VLAN members to a connection-oriented evpl regular flow. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmFlowAction.
STR cmFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.4.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the Flow.
STR cmFlowCpdFilterDescr	1.3.6.1.4.1.2544.1.12.4.1.5.1.3	DisplayString	read-only	This provides description of CPD Filter.
STR cmFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.29.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the FlowPoint.
STR cmFlowPointCpdProfileName	1.3.6.1.4.1.2544.1.12.4.1.34.1.2	DisplayString	read-write	This object describes the alias of the cpd V3 profile entry.
STR cmFlowPointElmiEvcIdentifier	1.3.6.1.4.1.2544.1.12.4.1.29.1.52	DisplayString	read-create	This object specifies FlowPoint Evc Identifier required for E-LMI feature.
STR cmFlowPointIngressVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.29.1.9	DisplayString	read-create	It allows specification of VLAN members of the FlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flowpoint is created, this attribute can only be updated using cmFlowPointVlanMemberAction and cmFlowPointVlanMemberActionVlan objects.
STR cmFlowPointVlanMemberActionVlan	1.3.6.1.4.1.2544.1.12.4.1.29.1.11	DisplayString	read-create	This object allows adding/removing VLAN members to a flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmFlowPointVlanMemberAction.
STR cmFlowRefConnectGuardFlowList	1.3.6.1.4.1.2544.1.12.4.1.4.1.69	DisplayString	read-write	This object specifies the secure flow list, it should be f3ConnectGuardFlowIndex value list split with comma.
STR cmFlowSecureStateList	1.3.6.1.4.1.2544.1.12.4.1.4.1.70	DisplayString	read-only	This object specifies the secure state list, it should be secure state value list and split with comma. For detailed description how to identify values, please see FlowSecState in CM-COMMON-MIB.
STR cmFlowVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.4.1.17	DisplayString	read-create	This object is applicable only when Port is in connection-oriented evpl mode. This attribute is mandatory if creation of connection-oriented evpl regular flow is desired. It allows specification of VLAN members of the Flow. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flow is created, this attribute can only be updated using cmFlowAction and cmFlowActionVlan objects.
STR cmOAMFlowPointCircuitName	1.3.6.1.4.1.2544.1.12.4.1.30.1.2	DisplayString	read-create	This object allows SNMP management entities to provide a circuit identifier with the OAMFlowPoint.
STR cmOAMFlowPointIngressVlanMemberList	1.3.6.1.4.1.2544.1.12.4.1.30.1.6	DisplayString	read-create	It allows specification of VLAN members of the OAMFlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flowpoint is created, this attribute can only be updated using cmOAMFlowPointVlanMemberAction and cmOAMFlowPointVlanMemberActionVlan objects.
STR cmOAMFlowPointVlanMemberActionVlan	1.3.6.1.4.1.2544.1.12.4.1.30.1.8	DisplayString	read-create	This object allows adding/removing VLAN members to a oam flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmOAMFlowPointVlanMemberAction.
STR cmPortCpdProfileName	1.3.6.1.4.1.2544.1.12.4.1.33.1.2	DisplayString	read-write	This object describes the alias of the cpd V3 profile entry.
STR cmPrioMapV2ProfileAlias	1.3.6.1.4.1.2544.1.12.4.1.70.1.2	DisplayString	read-write	The integer index value describes the profile alias.
STR cmQosPolicerProfileName	1.3.6.1.4.1.2544.1.12.4.1.39.1.2	DisplayString	read-create	This object defines the alias for this profile
STR cmQosQueueProfileName	1.3.6.1.4.1.2544.1.12.4.1.40.1.2	DisplayString	read-create	This object defines the alias for this profile
STR cmTrafficAclProfileName	1.3.6.1.4.1.2544.1.12.4.1.37.1.2	DisplayString	read-write	This object describes the alias of the Acl profile entry.
STR f3GPSReceiverPortAlias	1.3.6.1.4.1.2544.1.12.4.1.57.1.18	DisplayString	read-create	This object provides an alias to the GPS port
STR f3GPSReceiverPortCoordinateLatitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.23	DisplayString	read-write	This object provides the GNSS Receiver Port coordinate latitude in the following format: N\|Sddd:mm:ss.sss (d=degrees, m=minutes, s=seconds) e.g. N37:22:44.123.
STR f3GPSReceiverPortCoordinateLongitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.24	DisplayString	read-write	This object provides the GNSS Receiver Port coordinate longitude in the following format: E\|Wddd:mm:ss.sss (d=degrees, m=minutes, s=seconds) e.g. E157:53:33.456.
STR f3GPSReceiverPortCoordinateStringAltitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.33	DisplayString	read-write	When Self Survey Control is disabled, this object configures the GNSS Receiver Port altitude in meters. The altitude is of the form [+/-]XXXXX[.Y] where XXXXX can be any between -400 and 10000 value and Y allows precision of 1 decimal after the floating point. Note that the sign and .Y are optional. When Self Survey Control is enabled, this object is not configurable and displays the GNSS Receiver Port altitude in meters.
STR f3GPSReceiverPortServiceAvailablePercentage	1.3.6.1.4.1.2544.1.12.4.1.57.1.40	DisplayString	read-only	This object allows to manage service available in percentage [XXX.YY%] for GNSS.
STR f3IrigOpticalOutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.107.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
STR f3IrigOutputGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.109.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output group entity.
STR f3IrigOutputUnitPortAlias	1.3.6.1.4.1.2544.1.12.4.1.110.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
STR f3IrigRelayOutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.108.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
STR f3IrigRs422OutputPortAlias	1.3.6.1.4.1.2544.1.12.4.1.106.1.4	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the output port entity.
STR f3PulsePerSecondPortAlias	1.3.6.1.4.1.2544.1.12.4.1.53.1.21	DisplayString	read-create	This object allows SNMP management entities to provide an alias to the PPS port.
STR f3TimeOfDayPortAlias	1.3.6.1.4.1.2544.1.12.4.1.55.1.14	DisplayString	read-create	This object allows SNMP management entities to provide an alias to the Time Of Day port.
STR f3Usb3GDCNPortAPN	1.3.6.1.4.1.2544.1.12.4.1.46.1.23	DisplayString	read-write	This object allows configure the Access Point Name of the G3 DCN Port.
STR f3Usb3GDCNPortConfirmPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.30	DisplayString	read-create	This object is the Confirm Pin Code.
STR f3Usb3GDCNPortCurrentPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.28	DisplayString	read-create	This object is the Current Pin Code.
STR f3Usb3GDCNPortCurrentPukCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.31	DisplayString	read-create	This object is the Current Puk Code.
STR f3Usb3GDCNPortDailNumber	1.3.6.1.4.1.2544.1.12.4.1.46.1.26	DisplayString	read-write	This object allows configure the Dail Number of the G3 DCN Port.
STR f3Usb3GDCNPortFirmwareVersion	1.3.6.1.4.1.2544.1.12.4.1.46.1.12	DisplayString	read-only	This object provides the Firmware Version of the G3 DCN Port..
STR f3Usb3GDCNPortFSN	1.3.6.1.4.1.2544.1.12.4.1.46.1.9	DisplayString	read-only	This object provides the Factory Serial Number of the G3 DCN Port.
STR f3Usb3GDCNPortHardwareVersion	1.3.6.1.4.1.2544.1.12.4.1.46.1.11	DisplayString	read-only	This object provides the Hardware Version of the G3 DCN Port.
STR f3Usb3GDCNPortIMEI	1.3.6.1.4.1.2544.1.12.4.1.46.1.10	DisplayString	read-only	This object provides the International Mobile Equipment Identity of the G3 DCN Port.
STR f3Usb3GDCNPortIMSI	1.3.6.1.4.1.2544.1.12.4.1.46.1.35	DisplayString	read-only	This object provides the International Mobile Subscriber Identity of the G3 DCN Port.
STR f3Usb3GDCNPortModel	1.3.6.1.4.1.2544.1.12.4.1.46.1.8	DisplayString	read-only	This object provides the Model of the G3 DCN Port.
STR f3Usb3GDCNPortNewPinCode	1.3.6.1.4.1.2544.1.12.4.1.46.1.29	DisplayString	read-create	This object is the New Pin code.
STR f3Usb3GDCNPortPassword	1.3.6.1.4.1.2544.1.12.4.1.46.1.25	DisplayString	read-write	This object allows configure the Password of the G3 DCN Port.
STR f3Usb3GDCNPortProviderName	1.3.6.1.4.1.2544.1.12.4.1.46.1.20	DisplayString	read-only	This object provides the Wireless Service Provider Name of the G3 DCN Port.
STR f3Usb3GDCNPortUserName	1.3.6.1.4.1.2544.1.12.4.1.46.1.24	DisplayString	read-write	This object allows configure the User Name of the G3 DCN Port.
STR f3Usb3GDCNPortVendorName	1.3.6.1.4.1.2544.1.12.4.1.46.1.7	DisplayString	read-only	This object provides the Vendor Name of the G3 DCN Port.
STR f3UsbWIFIDonglePortAccessdUsers	1.3.6.1.4.1.2544.1.12.4.1.77.1.17	DisplayString	read-only	The users list of accessed via WIFI dongle port.
STR f3UsbWIFIDonglePortName	1.3.6.1.4.1.2544.1.12.4.1.77.1.18	DisplayString	read-only	The WIFI dongle port name.
STR f3UsbWIFIDonglePortPassword	1.3.6.1.4.1.2544.1.12.4.1.77.1.8	DisplayString	read-write	This object represents the password value of this SSID.
STR f3UsbWIFIDonglePortSSID	1.3.6.1.4.1.2544.1.12.4.1.77.1.7	DisplayString	read-write	This object represents the SSID value of this port.
STR gps10MHzPortAlias	1.3.6.1.4.1.2544.1.12.4.1.18.1.15	DisplayString	read-write	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
STR ocnStmExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.26	DisplayString	read-write	This object provides the expected J0 on the OCn/STM interface.
STR ocnStmRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.24	DisplayString	read-only	This object provides the recevied J0 on the OCn/STM interface.
STR ocnStmSfpHardwareRevision	1.3.6.1.4.1.2544.1.12.4.1.47.1.37	DisplayString	read-only	This object provides the hardware revision of the SFP.
STR ocnStmSfpName	1.3.6.1.4.1.2544.1.12.4.1.47.1.36	DisplayString	read-only	This object provides the official name of the SFP.
STR ocnStmSfpPartNumber	1.3.6.1.4.1.2544.1.12.4.1.47.1.8	DisplayString	read-only	This object provides the part number of the SFP.
STR ocnStmSfpSerialNumber	1.3.6.1.4.1.2544.1.12.4.1.47.1.9	DisplayString	read-only	This object provides the serial number of the SFP.
STR ocnStmSfpVendorName	1.3.6.1.4.1.2544.1.12.4.1.47.1.7	DisplayString	read-only	This object provides the vendor name of the SFP.
STR ocnStmTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.47.1.25	DisplayString	read-write	This object provides the transmit J0 on the OCn/STM interface.
STR pps16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.79.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
STR stsVcPathExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.16	DisplayString	read-write	This object provides the expected J1 on the OCn Path.
STR stsVcPathRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.14	DisplayString	read-only	This object provides the recevied J1 on the OCn Path.
STR stsVcPathTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.48.1.15	DisplayString	read-write	This object provides the transmit J1 on the OCn Path.
STR todPps16PortGroupAlias	1.3.6.1.4.1.2544.1.12.4.1.81.1.6	DisplayString	read-only	This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity.
STR vtVcPathExpectedTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.16	DisplayString	read-write	This object provides the expected J2 on the OCn VT1.5/VC12.
STR vtVcPathRxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.14	DisplayString	read-only	This object provides the recevied J2 on the OCn VT1.5/VC12.
STR vtVcPathTxTrailTrace	1.3.6.1.4.1.2544.1.12.4.1.49.1.15	DisplayString	read-write	This object provides the transmit J2 on the OCn VT1.5/VC12.
DynamicModelType (1)
DYN f3GPSReceiverPortGnssDynamicModel	1.3.6.1.4.1.2544.1.12.4.1.57.1.53	DynamicModelType	read-write	This object defines the dynamic model of GNSS. For example, whether the GNSS receiver is stationary, automotive etc.
E1T1FrameFormat (1)
E1T e1t1FrameFormat	1.3.6.1.4.1.2544.1.12.4.1.50.1.16	E1T1FrameFormat	read-write	This object represents the E1/T1 Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf, t1-esf and t1-unframed and the default value is t1-unframed. When the port is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. R5.4CC supports only t1-unframed for T1 Line type.
E1T1LineCode (1)
E1T e1t1LineCode	1.3.6.1.4.1.2544.1.12.4.1.50.1.15	E1T1LineCode	read-write	This object represents the E1/T1 Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the port is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3.
E1T1LineType (1)
E1T e1t1LineType	1.3.6.1.4.1.2544.1.12.4.1.50.1.14	E1T1LineType	read-only	This object represents the E1/T1 Line Type. Determines whether the E1/T1 interface operates in T1 or E1 mode.
E1T1RcvSensitivity (1)
E1T e1t1RcvSensitivity	1.3.6.1.4.1.2544.1.12.4.1.50.1.19	E1T1RcvSensitivity	read-write	This object allows configuring the reciever sensitivity based on expected signal strength
E3T3FrameFormat (1)
E3T e3t3FrameFormat	1.3.6.1.4.1.2544.1.12.4.1.51.1.16	E3T3FrameFormat	read-write	This object represents the Frame Format of the E3/T3.
EfIdentificationFieldType (1)
EFI cmFlowPointEfIdentificationFields	1.3.6.1.4.1.2544.1.12.4.1.29.1.59	EfIdentificationFieldType	read-write	The Elephant Flows are identified per flowpoint. This object specifies the type of Elephant Flow identification based on specific fields in the L2-L4 headers. The identification includes the Source MAC Address, Destination MAC Address, Source IP Address, Destination IP Address, IP Protocol, Source Port and Destination Port. For Source and Destination ports, the supported protocols are TCP, UDP and SCTP.
EfIdentificationType (1)
EFI cmFlowPointEfIdentificationType	1.3.6.1.4.1.2544.1.12.4.1.29.1.55	EfIdentificationType	read-write	The Elephant Flows are identified per flowpoint. This object specifies the type of Elephant Flow identification based on specific fields in the L2-L4 headers. The five-tuple identification includes the Source MAC Address, Destination MAC Address, Source IP Address, Destination IP Address and IP Protocol. The seven-tuple identification includes the five-tuple fields as well as Source Port and Destination Port. For Source and Destination ports, the supported protocols are TCP, UDP and SCTP.
EoTDMMode (1)
EOT ocnStmEoTDMMode	1.3.6.1.4.1.2544.1.12.4.1.47.1.17	EoTDMMode	read-write	This object provides the TDM Mode base on OCn/STM interface. EoPDH means VCG container is PDH; EoTDM means VCG container is VC of SDH/SONET
EthernetMediaType (8)
ETH cmEthernetAccPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.1.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Access Port.
ETH cmEthernetAccPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.1.1.113	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Access Port.
ETH cmEthernetMgmtPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.9.1.11	EthernetMediaType	read-only	This object represents the type of Ethernet Media on the Ethernet Management Port.
ETH cmEthernetNetPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.7.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Network Port.
ETH cmEthernetNetPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.7.1.105	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Network Port.
ETH cmEthernetTrafficPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.8	EthernetMediaType	read-write	This object represents the type of Ethernet Media on the Ethernet Port. The media type includes, copper (1) fiber (2) coppersfp (3) CM Aggregation Product doesn't support copper.
ETH cmEthernetTrafficPortMediaTypeAutoSelected	1.3.6.1.4.1.2544.1.12.4.1.27.1.122	EthernetMediaType	read-only	This object provides the auto selected Ethernet Media of the Ethernet Traffic Port.
ETH ieee1588EthernetPortMediaType	1.3.6.1.4.1.2544.1.12.4.1.17.1.8	EthernetMediaType	read-write	This object represents the type of Media.
EthernetPortSpeed (10)
ETH cmEthernetAccPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.1.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Access Port.
ETH cmEthernetAccPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.1.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Access Port.
ETH cmEthernetMgmtPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.9.1.7	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Management Port.
ETH cmEthernetMgmtPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.9.1.8	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Management Port.
ETH cmEthernetNetPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.7.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Network Port.
ETH cmEthernetNetPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.7.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Network Port.
ETH cmEthernetTrafficPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.27.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Ethernet Port.
ETH cmEthernetTrafficPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.27.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Ethernet Port.
ETH ieee1588EthernetPortConfigSpeed	1.3.6.1.4.1.2544.1.12.4.1.17.1.9	EthernetPortSpeed	read-write	This object allows to configure the speed of the Port.
ETH ieee1588EthernetPortNegotiatedSpeed	1.3.6.1.4.1.2544.1.12.4.1.17.1.10	EthernetPortSpeed	read-only	This object provides the negotiated speed of the Port.
EthernetPortTrafficModel (2)
ETH cmEthernetAccPortTrafficModel	1.3.6.1.4.1.2544.1.12.4.1.1.1.121	EthernetPortTrafficModel	read-write	The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model.
ETH cmEthernetNetPortTrafficModel	1.3.6.1.4.1.2544.1.12.4.1.7.1.110	EthernetPortTrafficModel	read-write	The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model.
F3DisplayString (3)
STR cmMPFlowCircuitName	1.3.6.1.4.1.2544.1.12.4.1.60.1.2	F3DisplayString	read-write	This object allows SNMP management entities to provide a circuit identifier with the MPFlow.
STR cmMPFlowFPList	1.3.6.1.4.1.2544.1.12.4.1.60.1.13	F3DisplayString	read-write	This object only used to display trap and Flow point list. Fp will be add in the cmMPFlowMemberTable.
STR f3AclRuleAlias	1.3.6.1.4.1.2544.1.12.4.1.99.1.3	F3DisplayString	read-write	The ACL rule alias.
F3Usb3GDCNPINCodeActionType (1)
F3U f3Usb3GDCNPINCodeAction	1.3.6.1.4.1.2544.1.12.4.1.46.1.32	F3Usb3GDCNPINCodeActionType	read-create	This Action is for PIN code operation.
F3Usb3GNetworkConnectionState (1)
F3U f3Usb3GDCNPortConnectionStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.16	F3Usb3GNetworkConnectionState	read-only	This object provides the Wirless Connection Status of the G3 DCN Port.
F3Usb3GRecvSignalStrengthInd (1)
F3U f3Usb3GDCNPortRSSI	1.3.6.1.4.1.2544.1.12.4.1.46.1.17	F3Usb3GRecvSignalStrengthInd	read-only	This object provides the Received Signal Strength Indication of the G3 DCN Port.
F3Usb3GSimCardState (1)
F3U f3Usb3GDCNPortSIMStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.13	F3Usb3GSimCardState	read-only	This object provides the SIM card Status of the G3 DCN Port.
FlowConfigType (1)
FLO cmFlowConfigType	1.3.6.1.4.1.2544.1.12.4.1.4.1.54	FlowConfigType	read-only	This object specifies if this Flow is an Access Flow or Pass-thru Flow.
FlowTagControl (6)
FLO cmEncapFlowPointCTagControl	1.3.6.1.4.1.2544.1.12.4.1.113.1.5	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3EncapFlowPointCTagVlanId) and priority (f3EncapFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3EncapFlowPointCTagVlanId and f3EncapFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3EncapFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
FLO cmEncapFlowPointSTagControl	1.3.6.1.4.1.2544.1.12.4.1.113.1.8	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3EncapFlowPointSTagVlanId) and priority (f3EncapFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3EncapFlowPointSTagVlanId and f3EncapFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3EncapFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
FLO cmFlowCTagControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.30	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowCTagVlanId) and priority (cmFlowCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowCTagVlanId; if the type is 'none', no C-TAG management is performed. This object is not applicable for Tranparent Flow; the value should be 'none'.
FLO cmFlowPointCTagControl	1.3.6.1.4.1.2544.1.12.4.1.29.1.13	FlowTagControl	read-create	This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowPointCTagVlanId) and priority (cmFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified cmFlowPointCTagVlanId and cmFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed.
FLO cmFlowPointSTagControl	1.3.6.1.4.1.2544.1.12.4.1.29.1.16	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowPointSTagVlanId) and priority (cmFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified cmFlowPointSTagVlanId and cmFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed.
FLO cmFlowSTagControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.34	FlowTagControl	read-create	This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'swapvid', and 'none'. If the type is 'push', the VLAN Id (cmFlowSTagVlanId) and priority (cmFlowSTagVlanPriority) are pushed onto the frame; if the type is 'swapvid', the VLAN Id(12 bits) is swapped with the specified cmFlowSTagVlanId; type is 'none', no S-TAG manament is performed. This object is not applicable for Tranparent Flow; the value should be 'none'.
FlowTrafficType (1)
FLO cmFlowTrafficType	1.3.6.1.4.1.2544.1.12.4.1.4.1.15	FlowTrafficType	read-only	This object provides information on the type of traffic flow supported by the system, i.e.'shaped-only' flows (support only shaping) or 'policed-shaped' (support policing and shaping) flows. 'shaped-only' flow exists for FSP150CM NTU and CPMR access ports. 'policed-shaped' flows are supported in FSP150CC devices. Please note that this object refers to how traffic profiles are managed on devices and is independent of the policing enabling/disabling feature.
FlowVlanActionType (3)
FLO cmFlowAction	1.3.6.1.4.1.2544.1.12.4.1.4.1.18	FlowVlanActionType	read-write	This object is applicable only when Port is in connection-oriented evpl mode and the cmFlowType is regular. This object allows to add or remove the VLAN members specified by cmFlowActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowActionVlan and then should specify cmFlowAction on whether to add/remove the specified VLAN member.
FLO cmFlowPointVlanMemberAction	1.3.6.1.4.1.2544.1.12.4.1.29.1.10	FlowVlanActionType	read-write	This object allows to add or remove the VLAN members specified by cmFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowPointVlanMemberActionVlan and then should specify cmFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
FLO cmOAMFlowPointVlanMemberAction	1.3.6.1.4.1.2544.1.12.4.1.30.1.7	FlowVlanActionType	read-write	This object allows to add or remove the VLAN members specified by cmOAMFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmOAMFlowPointVlanMemberActionVlan and then should specify cmOAMFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
FrequencyIdentifier (2)
OID cmEthernetTrafficPortPlugFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.159	FrequencyIdentifier	read-write	If Channel Type is FREQUENCY, this is the local plug's frequency.
OID cmEthernetTrafficPortRemotePlugFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.163	FrequencyIdentifier	read-write	If Channel Type is FREQUENCY, this is the remote plug's frequency.
G3AuthStatus (1)
G3A f3Usb3GDCNPortPINStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.36	G3AuthStatus	read-only	This status of PIN/PUK
GFPEncapsulationType (2)
GFP cmEthernetNetPortTDMEncapsulation	1.3.6.1.4.1.2544.1.12.4.1.56.1.1	GFPEncapsulationType	read-write	This object describes the GFP Encapsulation type of the TDM network port.
GFP cmEthernetTrafficPortTDMEncapsulation	1.3.6.1.4.1.2544.1.12.4.1.52.1.1	GFPEncapsulationType	read-write	This object describes the GFP Encapsulation type of the traffic port.
GMetroAutoTuningMode (1)
GME cmEthernetTrafficPortPlugGMetroAutoTuningMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.155	GMetroAutoTuningMode	read-write	This is tuning mode for G.Metro plug.
GPSAntennaStatus (1)
GPS f3GPSReceiverPortAntennaStatus	1.3.6.1.4.1.2544.1.12.4.1.57.1.9	GPSAntennaStatus	read-only	This object provides the GPS Receiver Port Antenna status.
InstallationType (1)
INS f3GPSReceiverPortInstallationType	1.3.6.1.4.1.2544.1.12.4.1.57.1.15	InstallationType	read-write	This object configure Installation Type of the GPS Antenna.
INTEGER (7)
INT bitsPortIdleCode	1.3.6.1.4.1.2544.1.12.4.1.16.1.22	INTEGER	read-write	This object allows to manage the Idle Code for the BITS-OUT port.
INT cmEthernetAccPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.1.1.37	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
INT cmEthernetAccPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.1.1.33	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
INT cmEthernetNetPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.7.1.37	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
INT cmEthernetNetPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.7.1.33	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled.
INT cmEthernetTrafficPortInnerVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.27.1.84	INTEGER	read-write	This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled
INT cmEthernetTrafficPortOuterVlanLoopbackMask	1.3.6.1.4.1.2544.1.12.4.1.27.1.25	INTEGER	read-write	This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled
Integer32 (261)
I32 bits8PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.78.1.1	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, portIndex, bits8PortGroupIndex.
I32 bitsPortIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.2	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bitsPortIndex.
I32 bitsPortTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.1	Integer32	read-only	An integer index value used to uniquely identify this BITS Port within the card. Value 1 stands for BITS-IN, 2 for BITS-OUT.
I32 ccGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.1	Integer32	read-only	An integer index value used to uniquely identify this CC Group.
I32 ccGroupPhaseAdjust	1.3.6.1.4.1.2544.1.12.4.1.112.1.6	Integer32	read-write	The delay of CC output. This value is duplicated to all the CC outputs of all the CC cards in the same 54x0. This value is usually derived from a phase measurement of the CC input. It could also use a different method to derive the CC Phase Adjust..
I32 ccInputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.1	Integer32	read-only	An integer index value used to uniquely identify this CC input Port.
I32 clk16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.80.1.1	Integer32	read-only	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
I32 cmAccPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.22.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
I32 cmAccPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.21.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
I32 cmAccPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.23.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
I32 cmAccPortQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.12.1.24	Integer32	read-write	This object specifies the average frame size before fragmentation.
I32 cmAccPortQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.12.1.13	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
I32 cmAccPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.12.1.1	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper.
I32 cmAccPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.12.1.25	Integer32	read-write	This object specifies the wfq weight value.
I32 cmEgressCOS	1.3.6.1.4.1.2544.1.12.4.1.32.1.2	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmEgressCOSIndex	1.3.6.1.4.1.2544.1.12.4.1.32.1.1	Integer32	read-only	The integer index used to uniquely identify this Egress Priority Map Entry
I32 cmElineFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.28.1.1	Integer32	read-create	The integer index value corresponding to an Flow.
I32 cmEncapFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.113.1.1	Integer32	read-create	The integer index value corresponding to an Encap FlowPoint.
I32 cmEthernetAccPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.3.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
I32 cmEthernetAccPortCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.2.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmEthernetAccPortCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
I32 cmEthernetAccPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.2.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
I32 cmEthernetAccPortCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.2.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmEthernetAccPortCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
I32 cmEthernetAccPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.13.1.1	Integer32	read-only	Unique Index value to access the CPD row.
I32 cmEthernetAccPortDefaultCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.120	Integer32	read-write	The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is supported. This value is assigned to a frame received on a port when: - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame is untagged - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame has a single VLAN tag - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag; and the frame is untagged - the cmEthernetAccPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype - the cmEthernetAccPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype. This attribute has been deprecated and is not supported. The Default COS is determined from the flowpoint's associated Priority Mapping Profle.
I32 cmEthernetAccPortIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex. From release 5.6CC zero value becomes valid. The zero value is used in Network Element level objects which contain cmEthernetAccPortIndex in the index which is not-applicable for these objects e.g. Pass-thru Flows, Shapers or Policers.
I32 cmEthernetAccPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.1.1.44	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
I32 cmEthernetAccPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.1.1.47	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet access port.
I32 cmEthernetAccPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.1.1.31	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Access Port.
I32 cmEthernetAccPortMTU	1.3.6.1.4.1.2544.1.12.4.1.1.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Access Port. The object is made read-write for FSP150CC devices.
I32 cmEthernetAccPortOamId	1.3.6.1.4.1.2544.1.12.4.1.1.1.49	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
I32 cmEthernetAccPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.1.1.56	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Access Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
I32 cmEthernetAccPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.1.1.63	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
I32 cmEthernetAccPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.1.1.72	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetAccPortMediaType is fiber.
I32 cmEthernetAccPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.1.1.129	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
I32 cmEthernetAccPortSfpReach	1.3.6.1.4.1.2544.1.12.4.1.1.1.71	Integer32	read-only	This object provides the SFP Reach in meters. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
I32 cmEthernetAccPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.125	Integer32	read-write	This object used to specify the wfq group cos value.
I32 cmEthernetAccPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.1.1.124	Integer32	read-write	This object used to specify the wfq segmentation cos value.
I32 cmEthernetFlowPointCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.36.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
I32 cmEthernetMgmtPortIndex	1.3.6.1.4.1.2544.1.12.4.1.9.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Management Port within a card. Note that each Ethernet Management Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetMgmtPortIndex.
I32 cmEthernetMgmtPortMTU	1.3.6.1.4.1.2544.1.12.4.1.9.1.6	Integer32	read-only	This object provides the MTU on the Ethernet Management Port.
I32 cmEthernetNetPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.19.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
I32 cmEthernetNetPortCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.8.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmEthernetNetPortCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
I32 cmEthernetNetPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.8.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
I32 cmEthernetNetPortCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.8.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmEthernetNetPortCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
I32 cmEthernetNetPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.15.1.1	Integer32	read-only	Unique Index value to access the CPD row.
I32 cmEthernetNetPortDefaultCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.109	Integer32	read-write	The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is supported. This value is assigned to a frame received on a port when: - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame is untagged - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame has a single VLAN tag - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag; and the frame is untagged - the cmEthernetNetPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype - the cmEthernetNetPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype. This attribute has been deprecated and is not supported. The Default COS is determined from the flowpoint's associated Priority Mapping Profle.
I32 cmEthernetNetPortIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Network Port within a card. Note that each Ethernet Network Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex.
I32 cmEthernetNetPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.7.1.44	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
I32 cmEthernetNetPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.7.1.47	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet Network port.
I32 cmEthernetNetPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.7.1.31	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Network Port.
I32 cmEthernetNetPortMTU	1.3.6.1.4.1.2544.1.12.4.1.7.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Network Port.
I32 cmEthernetNetPortOamId	1.3.6.1.4.1.2544.1.12.4.1.7.1.49	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
I32 cmEthernetNetPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.7.1.56	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Network Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
I32 cmEthernetNetPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.7.1.63	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
I32 cmEthernetNetPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.7.1.70	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetNetPortMediaType is fiber.
I32 cmEthernetNetPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.7.1.124	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
I32 cmEthernetNetPortSfpReach	1.3.6.1.4.1.2544.1.12.4.1.7.1.69	Integer32	read-only	This object provides the SFP Reach in meters. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
I32 cmEthernetNetPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.120	Integer32	read-write	This object is used to specify the wfq group COS value.
I32 cmEthernetNetPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.7.1.119	Integer32	read-write	This object is used to specify the wfq segmentation COS value.
I32 cmEthernetNetPortXdslDsLineAttenuation	1.3.6.1.4.1.2544.1.12.4.1.104.1.17	Integer32	read-only	Downstream line attenuation.
I32 cmEthernetNetPortXdslDsSignalAttenuation	1.3.6.1.4.1.2544.1.12.4.1.104.1.16	Integer32	read-only	Downstream signal attenuation.
I32 cmEthernetNetPortXdslDsSNRMargin	1.3.6.1.4.1.2544.1.12.4.1.104.1.14	Integer32	read-only	Downstream SNR margin.
I32 cmEthernetNetPortXdslDsTxPower	1.3.6.1.4.1.2544.1.12.4.1.104.1.18	Integer32	read-only	Downstream transmit power.
I32 cmEthernetNetPortXdslUsSNRMargin	1.3.6.1.4.1.2544.1.12.4.1.104.1.15	Integer32	read-only	Upstream SNR margin.
I32 cmEthernetNetPortXdslUsTxPower	1.3.6.1.4.1.2544.1.12.4.1.104.1.19	Integer32	read-only	Upstream transmit power.
I32 cmEthernetTrafficPortClbIndex	1.3.6.1.4.1.2544.1.12.4.1.65.1.1	Integer32	read-only	An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
I32 cmEthernetTrafficPortCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.35.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
I32 cmEthernetTrafficPortCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.97.1.1	Integer32	read-only	Unique Index value to access the CPD row.
I32 cmEthernetTrafficPortIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Port within a card. Note that each Ethernet Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex.
I32 cmEthernetTrafficPortLinkLossFwdDelay	1.3.6.1.4.1.2544.1.12.4.1.27.1.32	Integer32	read-write	This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
I32 cmEthernetTrafficPortLinkLossFwdLocalLinkId	1.3.6.1.4.1.2544.1.12.4.1.27.1.35	Integer32	read-write	This object allows configuration of the Local Link Id on Ethernet port.
I32 cmEthernetTrafficPortLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.23	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the Ethernet Port.
I32 cmEthernetTrafficPortLpbkIndex	1.3.6.1.4.1.2544.1.12.4.1.69.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this vlan loopback entry.
I32 cmEthernetTrafficPortLpbkTime	1.3.6.1.4.1.2544.1.12.4.1.69.1.6	Integer32	read-write	This object represent the vlan loopback time.
I32 cmEthernetTrafficPortMaxMpFpNum	1.3.6.1.4.1.2544.1.12.4.1.27.1.107	Integer32	read-write	This object allows to set the mpflow max fp number, and now only the ports on ethernet10x1GCard, ethernet1x10GCard, ethernet1x10GHighPerCard, ethernet10x1GHighPerCard support this attribute. for others, cann't be set and will return 0.
I32 cmEthernetTrafficPortMTU	1.3.6.1.4.1.2544.1.12.4.1.27.1.7	Integer32	read-write	This object provides the MTU on the Ethernet Port. The object is made read-write for FSP150CC devices.
I32 cmEthernetTrafficPortOamId	1.3.6.1.4.1.2544.1.12.4.1.27.1.39	Integer32	read-only	OAM Id. This is unique EFM OAM sublayer port id.
I32 cmEthernetTrafficPortOamLocalMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.27.1.45	Integer32	read-only	This object represents the largest OAMPDU, in octets, supported by the Ethernet Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used.
I32 cmEthernetTrafficPortOamRemoteMaxPDUSize	1.3.6.1.4.1.2544.1.12.4.1.27.1.52	Integer32	read-only	This object allows retrieval of the remote OAM entity maximum OAMPDU size.
I32 cmEthernetTrafficPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.63.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
I32 cmEthernetTrafficPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.62.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
I32 cmEthernetTrafficPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.64.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
I32 cmEthernetTrafficPortRemoteSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.171	Integer32	read-only	This object provides Laser Wave Length in nano meters of the Remote SFP.
I32 cmEthernetTrafficPortRemoteSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.170	Integer32	read-only	This object provides Link Length of the Remote SFP.
I32 cmEthernetTrafficPortSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.19	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetTrafficPortMediaType is fiber.
I32 cmEthernetTrafficPortSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.27.1.18	Integer32	read-only	This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
I32 cmEthernetTrafficPortWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.27.1.138	Integer32	read-write	This object is used to specify the wfq group cos value.
I32 cmEthernetTrafficPortWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.27.1.137	Integer32	read-write	This object is used to specify the wfq segmentation cos value.
I32 cmFlowAutoCIRPercentage	1.3.6.1.4.1.2544.1.12.4.1.4.1.52	Integer32	read-create	This object specifies the percentage of available CIR on the Network ports assigned to this Flow when cmFlowAutoBandwidthConfigEnabled is TRUE. The flow guaranteedBW is set to available BW multiplied by this value. This object is only applicable to Tranparent Flow. The value of this object should be 0 for Access Flow.
I32 cmFlowCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.16	Integer32	read-create	This object allows specification of the COS (Class of Service) value for the Traffic Flow. This value is used at flow creation time to identify the COS level of the A2N and N2A shaper. In case of a multi-COS flow, this value is not applicable when multiple policers/shapers exist on the flow. This object is also applicable to specify the COS of a connection-oriented epl service.
I32 cmFlowCpdEthertype	1.3.6.1.4.1.2544.1.12.4.1.5.1.7	Integer32	read-write	This enables provides the Filter Ethertype to match.
I32 cmFlowCpdEthertypeMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.8	Integer32	read-write	This enables provides the Filter Ethertype Mask to match.
I32 cmFlowCpdIndex	1.3.6.1.4.1.2544.1.12.4.1.5.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this CPD Service Entry.
I32 cmFlowCpdSubtype	1.3.6.1.4.1.2544.1.12.4.1.5.1.9	Integer32	read-write	This enables provides the Filter Subtype to match.
I32 cmFlowCpdSubtypeMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.10	Integer32	read-write	This enables provides the Filter Subtype Mask to match.
I32 cmFlowCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.14.1.1	Integer32	read-only	Unique Index value to access the CPD row.
I32 cmFlowESFramesLossThreshold	1.3.6.1.4.1.2544.1.12.4.1.4.1.39	Integer32	read-write	This object is used to specify the number of frames lost per flow that starts counting Errored Seconds (ES) on the flow. This functionality is applicable if the flow is monitored using the Y.1731 ESA functionality.
I32 cmFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.4.1.1	Integer32	read-create	The integer index value corresponding to an Ethernet Flow.
I32 cmFlowPointAutoCIRPercentage	1.3.6.1.4.1.2544.1.12.4.1.29.1.48	Integer32	read-create	This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when cmFlowPointAutoBandwidthConfigEnabled is TRUE.
I32 cmFlowPointCpdProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.34.1.1	Integer32	read-only	Unique Index value to access the CPD profile row.
I32 cmFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.29.1.1	Integer32	read-create	The integer index value corresponding to an FlowPoint.
I32 cmFlowPointIngressCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.8	Integer32	read-create	This object allows specification of ingress COS (Class of Service) FlowPoint.
I32 cmFlowPointSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.29.1.22	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA functionality.
I32 cmFlowPointWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.61	Integer32	read-write	This object is used to specify wfq group COS value.
I32 cmFlowPointWfqOutPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.36	Integer32	read-write	This attribute description the WFQ out priority.
I32 cmFlowPointWfqQid	1.3.6.1.4.1.2544.1.12.4.1.29.1.35	Integer32	read-write	This attribute description the WFQ Qid.
I32 cmFlowPointWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.60	Integer32	read-write	This object is used to specify wfq segmentation COS value.
I32 cmFlowSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.4.1.40	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flow. This functionality is applicable if the flow is monitored using the Y.1731 ESA functionality.
I32 cmFlowWfqGroupCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.73	Integer32	read-write	This object used to specify the flow related wfq group COS value.
I32 cmFlowWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.72	Integer32	read-write	This object used to specify the flow related wfq segmentation COS value.
I32 cmIngressPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.31.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmIngressPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.31.1.1	Integer32	read-only	The integer index value corresponding to a priority value based on the cmEthernetTrafficPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmIngressPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.31.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmEthernetTrafficPortIngressPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
I32 cmMPFlowAgingTimer	1.3.6.1.4.1.2544.1.12.4.1.60.1.7	Integer32	read-write	MAC Table Entry will be removed from the forwarding table after an inactivity time represented by this entry. Not used in EG-X.
I32 cmMPFlowIndex	1.3.6.1.4.1.2544.1.12.4.1.60.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this MultiPointFlow.
I32 cmNetPortEncapPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.91.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible decoding table.
I32 cmNetPortEncapPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.90.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible encoding table.
I32 cmNetPortEncapPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.92.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the EncapPcp drop eligible priority pair table.
I32 cmNetPortExpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.85.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible decoding table.
I32 cmNetPortExpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.84.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible encoding table.
I32 cmNetPortExpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.86.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible priority pair table.
I32 cmNetPortIpPrecDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.88.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible decoding table.
I32 cmNetPortIpPrecDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.87.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible encoding table.
I32 cmNetPortIpPrecDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.89.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the IpPrec drop eligible priority pair table.
I32 cmNetPortPcpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.25.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible decoding table.
I32 cmNetPortPcpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.24.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.
I32 cmNetPortPcpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.26.1.1	Integer32	read-only	An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.
I32 cmNetPortPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.20.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmNetPortPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.20.1.1	Integer32	read-only	The integer index value corresponding to a priority value.
I32 cmNetPortPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.20.1.2	Integer32	read-write	The integer index value corresponding to a priority value.
I32 cmOAMFlowPointIndex	1.3.6.1.4.1.2544.1.12.4.1.30.1.1	Integer32	read-create	The integer index value corresponding to an OAMFlowPoint.
I32 cmOAMFlowPointSESFramesLossThresholdRatio	1.3.6.1.4.1.2544.1.12.4.1.30.1.10	Integer32	read-write	This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the oam flowpoint. This functionality is applicable if the oam flowpoint is monitored using the Y.1731 ESA functionality.
I32 cmPethPsePortExtGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.58.1.1	Integer32	not-accessible	This object has the same value with the group index in pethPsePortTalbe.
I32 cmPethPsePortExtIndex	1.3.6.1.4.1.2544.1.12.4.1.58.1.2	Integer32	not-accessible	This object has the same value with the port index in pethPsePortTalbe.
I32 cmPortCpdProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.33.1.1	Integer32	read-only	Unique Index value to access the CPD profile row.
I32 cmPrioMapCOS	1.3.6.1.4.1.2544.1.12.4.1.10.1.5	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmPrioMapIndex	1.3.6.1.4.1.2544.1.12.4.1.10.1.1	Integer32	read-only	The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmPrioMapInPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
I32 cmPrioMapV2IngressPrioMappingCOS	1.3.6.1.4.1.2544.1.12.4.1.71.1.3	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmPrioMapV2IngressPrioMappingIndex	1.3.6.1.4.1.2544.1.12.4.1.71.1.1	Integer32	not-accessible	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmPrioMapV2IngressPrioMappingInPriority	1.3.6.1.4.1.2544.1.12.4.1.71.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
I32 cmPrioMapV2PrioMappingCOSIndex	1.3.6.1.4.1.2544.1.12.4.1.72.1.1	Integer32	not-accessible	The index of this entry.
I32 cmPrioMapV2PrioMappingCOSInnerTagPri	1.3.6.1.4.1.2544.1.12.4.1.72.1.4	Integer32	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority.
I32 cmPrioMapV2PrioMappingCOSOuterTagPri	1.3.6.1.4.1.2544.1.12.4.1.72.1.3	Integer32	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority.
I32 cmPrioMapV2PrioMappingCOSValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.2	Integer32	read-only	This allows specification of the COS Value, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmPrioMapV2PrioMappingDscpValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.8	Integer32	read-write	This object allows configuring DSCP value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingEncapInnerTagPriority	1.3.6.1.4.1.2544.1.12.4.1.72.1.6	Integer32	read-write	This object allows configuring encapsulation inner tag priority value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingEncapOuterDscpValue	1.3.6.1.4.1.2544.1.12.4.1.72.1.7	Integer32	read-write	This object allows configuring encapsulation outer DSCP value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingEncapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.72.1.5	Integer32	read-write	This object allows configuring encapsulation outer tag priority value of ingress cos mapping.
I32 cmPrioMapV2PrioMappingPriCOS	1.3.6.1.4.1.2544.1.12.4.1.73.1.5	Integer32	read-write	This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.
I32 cmPrioMapV2PrioMappingPriIndex	1.3.6.1.4.1.2544.1.12.4.1.73.1.1	Integer32	not-accessible	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.
I32 cmPrioMapV2PrioMappingPriInPrio	1.3.6.1.4.1.2544.1.12.4.1.73.1.2	Integer32	read-write	The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.
I32 cmPrioMapV2PrioMappingPriXTagPrio	1.3.6.1.4.1.2544.1.12.4.1.73.1.4	Integer32	read-write	This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapV2XTagControl as 'swap'.
I32 cmPrioMapV2ProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.70.1.1	Integer32	not-accessible	The integer index value describes the profile index.
I32 cmQosFlowPolicerCBS	1.3.6.1.4.1.2544.1.12.4.1.11.1.11	Integer32	read-create	This object allows specification of the Commited Burst Size (CBS) on Policer.
I32 cmQosFlowPolicerEBS	1.3.6.1.4.1.2544.1.12.4.1.11.1.12	Integer32	read-create	This object allows specification of the Excess Burst Size (EBS) on the Policer.
I32 cmQosFlowPolicerIndex	1.3.6.1.4.1.2544.1.12.4.1.11.1.2	Integer32	read-create	The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. In release 5.6CC the range is extended to 1..16 to support duplicate N2A policers on a Flow. The duplicate policers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 going from Network 1 port; indices 9..16 represent policers for COS 0..7 going from Network 2 port. In case of single-cos Flow index 1 represents policer going from Network 1 port; index 9 represents policer going from Network 2 port.
I32 cmQosFlowPolicerRank	1.3.6.1.4.1.2544.1.12.4.1.11.1.25	Integer32	read-write	This object allows specification of rank value.
I32 cmQosFlowPolicerTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.11.1.1	Integer32	read-create	The unique index value corresponding to a Quality of Service Policer's direction. Values 1 and 2 are applicable to the Access Flow Policer - value of 1 stands for A2N direction, - value of 2 stands for N2A direction. Values 3 and 4 are applicable to Pass-thru Flow Policer (new in 5.6CC release): - value of 3 stands for N1toN2 direction - value of 4 stands for N2toN1 direction
I32 cmQosPolicerProfileCBS	1.3.6.1.4.1.2544.1.12.4.1.39.1.7	Integer32	read-create	This object allows specification of the Commited Burst Size (CBS) on Policer Profile.
I32 cmQosPolicerProfileEBS	1.3.6.1.4.1.2544.1.12.4.1.39.1.8	Integer32	read-create	This object allows specification of the Excess Burst Size (EBS) on the Policer Profile.
I32 cmQosPolicerProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.39.1.1	Integer32	read-create	This object defines the Policer profile ID. Up to 1000 profiles can be specified per system.
I32 cmQosPolicerV2Index	1.3.6.1.4.1.2544.1.12.4.1.41.1.1	Integer32	read-create	The Policer Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
I32 cmQosQueueProfileBufferSize	1.3.6.1.4.1.2544.1.12.4.1.40.1.3	Integer32	read-create	This object defines the buffer size of the selected queues.
I32 cmQosQueueProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.40.1.1	Integer32	read-create	This object defines the Queue profile ID. Up to 64 profiles can be specified per system.
I32 cmQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.6.1.27	Integer32	read-write	This object specifies the average frame size before fragmentation.
I32 cmQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.6.1.14	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
I32 cmQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.6.1.2	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper. In release 5.6CC the range is extended to 1..16 to support duplicate A2N shapers on a Flow. The duplicate shapers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent shapers of COS 0..7 going to Network 1 port; indices 9..16 represent shapers for COS 0..7 going to Network 2 port. In case of single-cos Flow index 1 represents shaper going to Network 1 port; index 9 represents shaper going to Network 2 port.
I32 cmQosShaperTypeIndex	1.3.6.1.4.1.2544.1.12.4.1.6.1.1	Integer32	read-create	The unique index value corresponding to a Quality of Service Shaper's direction. Values 1 and 2 are applicable to the Access Flow Shaper: - value of 1 stands for A2N direction, - value of 2 stands for N2A direction. Values 3 and 4 are applicable to Pass-thru Flow Shaper (new in 5.6CC release): - value of 3 stands for N1toN2 direction - value of 4 stands for N2toN1 direction
I32 cmQosShaperV2Index	1.3.6.1.4.1.2544.1.12.4.1.42.1.1	Integer32	read-create	The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
I32 cmQosShaperV2IngressAverageFrameSize	1.3.6.1.4.1.2544.1.12.4.1.42.1.10	Integer32	read-create	This object defines the average frame size for accounting for Meter/Shaping.
I32 cmQosShaperV2WFQWeight	1.3.6.1.4.1.2544.1.12.4.1.42.1.15	Integer32	read-write	Weight of queue to be scheduled by WFQ mechanism.
I32 cmQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.6.1.28	Integer32	read-write	This object specifies the wfq weight value.
I32 cmTrafficAclIpQosValue	1.3.6.1.4.1.2544.1.12.4.1.38.1.26	Integer32	read-write	This object describes QOS value of Acl entry.
I32 cmTrafficAclProfileIndex	1.3.6.1.4.1.2544.1.12.4.1.37.1.1	Integer32	read-create	An arbitrary integer index value used to uniquely identify Traffic ACL profile entry.
I32 cmTrafficAclRulesIndex	1.3.6.1.4.1.2544.1.12.4.1.38.1.1	Integer32	read-create	An arbitrary integer index value used to uniquely identify Traffic ACL profile entry. The manager may not assume any particular semantics or meaning to this index, except that it identifies a logical row in the table.
I32 cmTrafficAclTcpUdpDstPortMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.23	Integer32	read-write	This object describes TCP/UDP maximum destination port number of Acl entry.
I32 cmTrafficAclTcpUdpDstPortNum	1.3.6.1.4.1.2544.1.12.4.1.38.1.22	Integer32	read-write	This object describes TCP/UDP minimum destination port number of Acl entry.
I32 cmTrafficAclTcpUdpSrcPortMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.20	Integer32	read-write	This object describes TCP/UDP maximum source port number of Acl entry.
I32 cmTrafficAclTcpUdpSrcPortNum	1.3.6.1.4.1.2544.1.12.4.1.38.1.19	Integer32	read-write	This object describes TCP/UDP minimum source port number of Acl entry.
I32 cmTrafficAclVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.38.1.30	Integer32	read-write	This object describes the Vlan Priority of Acl entry.
I32 cmTrafficPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.43.1.6	Integer32	read-create	This object defines the buffer size of Shaper.
I32 cmTrafficPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.43.1.1	Integer32	read-create	The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
I32 cmTrafficPortQosShaperIngressAverageFrameSize	1.3.6.1.4.1.2544.1.12.4.1.43.1.13	Integer32	read-create	This object defines the average frame size for accounting for Meter/Shaping.
I32 cmTrafficPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.43.1.16	Integer32	read-write	This object specifies the wfq weight value of the QoS shaper.
I32 e1t1LoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.50.1.10	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the E1/T1.
I32 e3t3LoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.51.1.10	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the E3/T3.
I32 f3AclRuleCOS	1.3.6.1.4.1.2544.1.12.4.1.99.1.7	Integer32	read-write	The ACL rule class of service.
I32 f3AclRuleDstIpv6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.4.1.99.1.57	Integer32	read-write	The ACL rule destination ipv6 prefix length.
I32 f3AclRuleDstPortHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.46	Integer32	read-write	The ACL rule destination port low limit.
I32 f3AclRuleDstPortLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.45	Integer32	read-write	The ACL rule destination port low limit.
I32 f3AclRuleEtherType	1.3.6.1.4.1.2544.1.12.4.1.99.1.29	Integer32	read-write	The ACL rule outer vlan ether type.
I32 f3AclRuleIndex	1.3.6.1.4.1.2544.1.12.4.1.99.1.1	Integer32	not-accessible	The ACL rule number.
I32 f3AclRuleIpv4PriorityHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.32	Integer32	read-write	The ACL rule ipv4 priority high limit.
I32 f3AclRuleIpv4PriorityLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.31	Integer32	read-write	The ACL rule IPv4 priority low limit.
I32 f3AclRuleIpV6FlowLabel	1.3.6.1.4.1.2544.1.12.4.1.99.1.59	Integer32	read-write	The ACL rule ipv6 Flow Label.
I32 f3AclRulePriority	1.3.6.1.4.1.2544.1.12.4.1.99.1.4	Integer32	read-write	The ACL rule priority.
I32 f3AclRulePriorityHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.62	Integer32	read-write	The ACL rule priority high limit.
I32 f3AclRulePriorityLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.61	Integer32	read-write	The ACL rule priority low limit.
I32 f3AclRuleProtocolNumber	1.3.6.1.4.1.2544.1.12.4.1.99.1.34	Integer32	read-write	The ACL rule protocol number.
I32 f3AclRuleSrcIpv6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.4.1.99.1.54	Integer32	read-write	The ACL rule source ipv6 prefix length.
I32 f3AclRuleSrcPortHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.43	Integer32	read-write	The ACL rule source port low limit.
I32 f3AclRuleSrcPortLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.42	Integer32	read-write	The ACL rule source port low limit.
I32 f3AclRuleTcpFlags	1.3.6.1.4.1.2544.1.12.4.1.99.1.48	Integer32	read-write	The ACL rule outer vlan TCP flags.
I32 f3EthernetTrafficPortExpDEDecIndex	1.3.6.1.4.1.2544.1.12.4.1.101.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible decoding table.
I32 f3EthernetTrafficPortExpDEEncIndex	1.3.6.1.4.1.2544.1.12.4.1.100.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible encoding table.
I32 f3EthernetTrafficPortExpDEPairIndex	1.3.6.1.4.1.2544.1.12.4.1.102.1.1	Integer32	not-accessible	An integer index value used to uniquely identify a row in the Exp drop eligible priority pair table.
I32 f3FlowPointCpdV2Index	1.3.6.1.4.1.2544.1.12.4.1.98.1.1	Integer32	not-accessible	Unique Index value to access the CPD row.
I32 f3FpQosPolicerCBS	1.3.6.1.4.1.2544.1.12.4.1.96.1.9	Integer32	read-create	This object represents the Commited Burst Size (CBS) of a Policer.
I32 f3FpQosPolicerEBS	1.3.6.1.4.1.2544.1.12.4.1.96.1.10	Integer32	read-create	This object represents the Excess Burst Size (EBS) of a Policer.
I32 f3FpQosPolicerIndex	1.3.6.1.4.1.2544.1.12.4.1.96.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represents COS 1 and so on.
I32 f3FpQosPolicerRank	1.3.6.1.4.1.2544.1.12.4.1.96.1.22	Integer32	read-write	This object allows specification of rank value.
I32 f3FpQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.95.1.12	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
I32 f3FpQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.95.1.1	Integer32	not-accessible	The unique integer index value corresponding to a Quality of Service Shaper.
I32 f3FpQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.95.1.15	Integer32	read-write	This object represents the wfq weight of the QoS Shaper.
I32 f3GPSReceiverPortAGC	1.3.6.1.4.1.2544.1.12.4.1.57.1.41	Integer32	read-only	This object represents the Automatic Gain Control (AGC) level for the GNSS receiver.
I32 f3GPSReceiverPortAntennaDelayValue	1.3.6.1.4.1.2544.1.12.4.1.57.1.19	Integer32	read-write	This object configures GNSS antenna cable delay used by the GNSS Receiver Port, in units determined by f3GPSReceiverPortAntennaDelayType object.
I32 f3GPSReceiverPortFirmwareUpgradePercent	1.3.6.1.4.1.2544.1.12.4.1.57.1.26	Integer32	read-only	This object describes the firmware upgrade percent value. Note: value 255 means NA.
I32 f3GPSReceiverPortIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this GPS Receiver Port within the card.
I32 f3GPSReceiverPortTimeAdvanceValue	1.3.6.1.4.1.2544.1.12.4.1.57.1.36	Integer32	read-write	This object allows to configure time advance value (ns) for the GNSS on OSA540X.
I32 f3IrigOpticalOutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG optical output port in it parent card.
I32 f3IrigOutputGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG output group in its parent card.
I32 f3IrigOutputUnitPortIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG output unit port in its output group.
I32 f3IrigRelayOutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG time relay output port in its parent card.
I32 f3IrigRs422OutputPortIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IRIG RS422 output port in its parent card.
I32 f3NetPortQosShaperAvgFrameSizeBeforeFragment	1.3.6.1.4.1.2544.1.12.4.1.45.1.24	Integer32	read-write	This object specifies the average frame size before fragmentation.
I32 f3NetPortQosShaperCOS	1.3.6.1.4.1.2544.1.12.4.1.45.1.13	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
I32 f3NetPortQosShaperIndex	1.3.6.1.4.1.2544.1.12.4.1.45.1.1	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper.
I32 f3NetPortQosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.4.1.45.1.25	Integer32	read-write	This object specifies the wfq weight value.
I32 f3PolicerEnvelopeIndex	1.3.6.1.4.1.2544.1.12.4.1.82.1.1	Integer32	not-accessible	An integer index value used to uniquely identify policer envelope.
I32 f3PulsePerSecondPortDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.53.1.12	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds in 8 nanoseconds steps. For input port, that is with input Signal Direction, the valid values are -5000000 to 5000000. Whereas for output port, the valid values are 0 to 90. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
I32 f3PulsePerSecondPortIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
I32 f3TimeOfDayPortDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.55.1.13	Integer32	read-write	This object allows specification of the TOD external Delay Compensation in nanoseconds. For input port, that is with input Signal Direction, the valid values are -5000000 to 5000000 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
I32 f3TimeOfDayPortIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Time Of Day Port within the card.
I32 f3Usb3GDCNPortIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.1	Integer32	read-only	An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, f3Usb3GDCNPortIndex
I32 f3Usb3GDCNPortMTU	1.3.6.1.4.1.2544.1.12.4.1.46.1.19	Integer32	read-only	This object provides the MTU of the G3 DCN Port.
I32 f3Usb3GDCNPortPINLeftChances	1.3.6.1.4.1.2544.1.12.4.1.46.1.14	Integer32	read-only	This object provides the Left Chances for PIN input of the G3 DCN Port.
I32 f3Usb3GDCNPortPUKLeftChances	1.3.6.1.4.1.2544.1.12.4.1.46.1.15	Integer32	read-only	This object provides the Left Chances for PUK input of the G3 DCN Port.
I32 f3Usb3GDCNPortRedialTimer	1.3.6.1.4.1.2544.1.12.4.1.46.1.27	Integer32	read-write	This object allows configure the Retail Timer of the G3 DCN Port.
I32 f3Usb3GDCNPortSpeed	1.3.6.1.4.1.2544.1.12.4.1.46.1.18	Integer32	read-only	This object provides the Connection Speed of the G3 DCN Port.
I32 f3UsbWIFIDonglePortIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.1	Integer32	not-accessible	An integer index value used to uniquely identify WIFI dongle port.
I32 gps10MHzPortIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.1	Integer32	read-only	An integer index value used to uniquely identify the IEEE Ethernet Port.
I32 ieee1588EthernetPortIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.1	Integer32	read-only	An integer index value used to uniquely identify the IEEE Ethernet Port.
I32 ieee1588EthernetPortMTU	1.3.6.1.4.1.2544.1.12.4.1.17.1.7	Integer32	read-write	This object provides the MTU on the Port.
I32 neTMParamsAgingtime	1.3.6.1.4.1.2544.1.12.4.1.66.1.2	Integer32	read-create	The object describe the system aging time.
I32 ocnStmIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.1	Integer32	not-accessible	Unique index value associated with the OCn/STM interface.
I32 ocnStmLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.47.1.20	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn/STM interface.
I32 ocnStmSfpLaserWaveLength	1.3.6.1.4.1.2544.1.12.4.1.47.1.13	Integer32	read-only	This object provides the SFP Laser Wave Length in nano meters.
I32 ocnStmSfpLinkLength	1.3.6.1.4.1.2544.1.12.4.1.47.1.12	Integer32	read-only	This object provides the SFP Link Length.
I32 pethMainPseExtGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.59.1.1	Integer32	not-accessible	This object has the same value with the group index in pethMainPseEXTTable.
I32 pps16PortGroupDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.79.1.10	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
I32 pps16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.79.1.1	Integer32	read-only	An integer index value used to uniquely identify this Pulse Per Second Port within the card.
I32 sciPortIndex	1.3.6.1.4.1.2544.1.12.4.1.105.1.1	Integer32	read-only	An integer index value used to uniquely identify this SCI Port.
I32 stsVcPathLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.48.1.9	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn Path.
I32 todPps16PortGroupDelayCompensation	1.3.6.1.4.1.2544.1.12.4.1.81.1.11	Integer32	read-write	This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8.
I32 todPps16PortGroupIndex	1.3.6.1.4.1.2544.1.12.4.1.81.1.1	Integer32	read-only	An integer index value used to uniquely identify this Time Of Day Port within the card.
I32 vtVcPathLoopbackTime	1.3.6.1.4.1.2544.1.12.4.1.49.1.9	Integer32	read-write	This object allows to specify time for timed-loopbacks on on the OCn VT1.5/VC12.
InterfaceIndex (31)
NUM bits8PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.78.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bits8PortGroupIndex, bits8PortGroupIfIndex.
NUM bitsPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for Bits Port. An integer index value used to uniquely identify this Bits Port.
NUM ccGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this group as an interface in ifTable entries with ifIndex value.
NUM ccInputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this input port as an interface in ifTable entries with ifIndex value.
NUM clk16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.80.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
NUM cmEthernetAccPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Access Port. An integer index value used to uniquely identify this Ethernet Access Port.
NUM cmEthernetNetPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Network Port. An integer index value used to uniquely identify this Ethernet Network Port.
NUM cmEthernetTrafficPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Ethernet Port. An integer index value used to uniquely identify this Ethernet Port.
NUM e1t1IfIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for E1/T1. An integer index value used to uniquely identify this E1/T1 interface.
NUM e1t1ParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.1	InterfaceIndex	not-accessible	This object represents the parent (container) object's interface index. In the case when parent of E1T1Entry does not have a InterfaceIndex then the e1t1ParentIfIndex shall have the value of 2147483647, e.g. if parent of E1T1Entry is a card represented in pseudoWireE1T1CardTable.
NUM e3t3IfIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for E3/T3. An integer index value used to uniquely identify this E3/T3 interface.
NUM e3t3ParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex.
NUM f3GPSReceiverPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this GPS Receiver Port.
NUM f3IrigOpticalOutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
NUM f3IrigOutputGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
NUM f3IrigOutputUnitPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
NUM f3IrigRelayOutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
NUM f3IrigRs422OutputPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.2	InterfaceIndex	read-only	An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value.
NUM f3PulsePerSecondPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
NUM f3TimeOfDayPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port.
NUM f3Usb3GDCNPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for G3 DCN Port. An integer index value used to uniquely identify this G3 DCN Port.
NUM f3UsbWIFIDonglePortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for WIFI dongle Port. An integer index value used to uniquely identify this Port
NUM gps10MHzPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for the IEEE Ethernet Port.
NUM ieee1588EthernetPortIfIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for the IEEE Ethernet Port.
NUM ocnStmIfIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn/STM interface. An integer index value used to uniquely identify this OCn/STM interface.
NUM pps16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.79.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port.
NUM stsVcPathIfIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn Path. An integer index value used to uniquely identify this OCn Path interface.
NUM stsVcPathParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex. Based on the Multiplexing hierarchy, this object points to the container's interface index.
NUM todPps16PortGroupIfIndex	1.3.6.1.4.1.2544.1.12.4.1.81.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port.
NUM vtVcPathIfIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.3	InterfaceIndex	read-only	This object has the same value as ifIndex for OCn VT1.5/VC12. An integer index value used to uniquely identify this OCn VT1.5/VC12 interface.
NUM vtVcPathParentIfIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.1	InterfaceIndex	not-accessible	This object is its parent's ifindex.
IpAddress (22)
IP cmEthernetAccPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.1.1.123	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
IP cmEthernetAccPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.1.1.136	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
IP cmEthernetNetPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.7.1.118	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
IP cmEthernetNetPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.7.1.131	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
IP cmEthernetTrafficPortJdsuLoopbackSrcIp	1.3.6.1.4.1.2544.1.12.4.1.27.1.130	IpAddress	read-only	This object is applicable when there is jdsu l3 loopback.
IP cmEthernetTrafficPortLoopbackTestReflectorIPv4Address	1.3.6.1.4.1.2544.1.12.4.1.27.1.149	IpAddress	read-write	This is the Test Reflector Interface IPv4 address.
IP cmTrafficAclDstIpV4Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.13	IpAddress	read-write	The destination IP address of Acl entry.
IP cmTrafficAclDstIpV4AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.14	IpAddress	read-write	The destination IP mask of Acl entry.
IP cmTrafficAclSrcIpV4Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.11	IpAddress	read-write	The source IP address of Acl entry.
IP cmTrafficAclSrcIpV4AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.12	IpAddress	read-write	The source IP mask of Acl entry.
IP f3AclRuleDstIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.40	IpAddress	read-write	The ACL rule destination ipv4 adress high limit.
IP f3AclRuleDstIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.39	IpAddress	read-write	The ACL rule Destination IPv4 Adress low limit.
IP f3AclRuleSrcIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.37	IpAddress	read-write	The ACL rule source ipv4 adress high limit.
IP f3AclRuleSrcIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.36	IpAddress	read-write	The ACL rule source IPv4 Adress low limit.
IP f3Usb3GDCNPortDNS1	1.3.6.1.4.1.2544.1.12.4.1.46.1.21	IpAddress	read-only	This first DNS of the interface.
IP f3Usb3GDCNPortDNS2	1.3.6.1.4.1.2544.1.12.4.1.46.1.22	IpAddress	read-only	This second DNS of the interface.
IP f3Usb3GDCNPortIpAddress	1.3.6.1.4.1.2544.1.12.4.1.46.1.39	IpAddress	read-only	The IP address of this port.
IP f3Usb3GDCNPortNetMask	1.3.6.1.4.1.2544.1.12.4.1.46.1.40	IpAddress	read-only	The IP subnet mask of this port.
IP f3UsbWIFIDonglePortIPAddress	1.3.6.1.4.1.2544.1.12.4.1.77.1.10	IpAddress	read-write	The IP address of this port.
IP f3UsbWIFIDonglePortWIFIAllocatedIPEnd	1.3.6.1.4.1.2544.1.12.4.1.77.1.14	IpAddress	read-write	The last IP address could be allocated.
IP f3UsbWIFIDonglePortWIFIAllocatedIPFrom	1.3.6.1.4.1.2544.1.12.4.1.77.1.13	IpAddress	read-write	The start IP address could be allocated.
IP f3UsbWIFIDonglePortwWIFIIPNetMask	1.3.6.1.4.1.2544.1.12.4.1.77.1.11	IpAddress	read-write	The IP address mask of this port.
Ipv6Address (9)
ADR cmEthernetAccPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.1.1.138	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
ADR cmEthernetNetPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.7.1.133	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
ADR cmEthernetTrafficPortLoopbackTestReflectorIPv6Address	1.3.6.1.4.1.2544.1.12.4.1.27.1.151	Ipv6Address	read-write	This is the Test Reflector Interface IPv6 address.
ADR cmTrafficAclDstIpV6Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.17	Ipv6Address	read-write	The destination IPV6 address of Acl entry.
ADR cmTrafficAclDstIpV6AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.18	Ipv6Address	read-write	The destination IPV6 mask of Acl entry.
ADR cmTrafficAclSrcIpV6Addr	1.3.6.1.4.1.2544.1.12.4.1.38.1.15	Ipv6Address	read-write	The source IPV6 address of Acl entry.
ADR cmTrafficAclSrcIpV6AddrMask	1.3.6.1.4.1.2544.1.12.4.1.38.1.16	Ipv6Address	read-write	The source IPV6 mask of Acl entry.
ADR f3AclRuleDstIpv6Address	1.3.6.1.4.1.2544.1.12.4.1.99.1.56	Ipv6Address	read-write	The ACL rule destination ipv6 adress.
ADR f3AclRuleSrcIpv6Address	1.3.6.1.4.1.2544.1.12.4.1.99.1.53	Ipv6Address	read-write	The ACL rule source ipv6 adress high limit.
IrigControlField (3)
IRI f3IrigOpticalOutputPortControlField	1.3.6.1.4.1.2544.1.12.4.1.107.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
IRI f3IrigOutputUnitPortControlField	1.3.6.1.4.1.2544.1.12.4.1.110.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
IRI f3IrigRs422OutputPortControlField	1.3.6.1.4.1.2544.1.12.4.1.106.1.9	IrigControlField	read-write	This object allows to manage the Control field of the IRIG output port.
IrigDigitalSignalVoltage (1)
IRI f3IrigOutputUnitPortDigitalVoltage	1.3.6.1.4.1.2544.1.12.4.1.110.1.11	IrigDigitalSignalVoltage	read-write	This object allows to manage, for digital output type only, the voltage of the IRIG output port.
IrigGroupExtensionType (1)
IRI f3IrigOutputGroupExtensionType	1.3.6.1.4.1.2544.1.12.4.1.109.1.5	IrigGroupExtensionType	read-write	This object allows to manage the Time Code of the IRIG output group.
IrigOutputType (1)
IRI f3IrigOutputUnitPortType	1.3.6.1.4.1.2544.1.12.4.1.110.1.10	IrigOutputType	read-write	This object allows to manage the output type, digital or analogous, of the IRIG output port.
IrigRelayOperation (1)
IRI f3IrigRelayOutputPortRelayOperation	1.3.6.1.4.1.2544.1.12.4.1.108.1.8	IrigRelayOperation	read-write	This object allows to manage the relay operation of the IRIG output port.
IrigTimeCode (3)
IRI f3IrigOpticalOutputPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.107.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
IRI f3IrigOutputUnitPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.110.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
IRI f3IrigRs422OutputPortTimeCode	1.3.6.1.4.1.2544.1.12.4.1.106.1.8	IrigTimeCode	read-write	This object allows to manage the Time Code of the IRIG output port.
ITUCBandChannelIdentifier (2)
OID cmEthernetTrafficPortPlugITUCbandChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.157	ITUCBandChannelIdentifier	read-write	If Channel Type is ITU-CBAND, this is the local plug's ITU C-band channel.
OID cmEthernetTrafficPortRemotePlugITUCbandChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.161	ITUCBandChannelIdentifier	read-write	If Channel Type is ITU-CBAND, this is the remote plug's ITU C-band channel.
LearningAction (1)
LEA cmMPFlowtableFullAction	1.3.6.1.4.1.2544.1.12.4.1.60.1.9	LearningAction	read-write	Action on ingress frames when the number of MAC Table entires has reached the maximum defined by tableSize. BLOCK: A frame with a Source MAC address not in the MAC Table will be discarded. FORWARD: A frame with a Source MAC address not in the MAC table will not be learned and will be flooded to other flowpoints.
LearningConfigAction (1)
LEA cmMPFlowLearningConfigAction	1.3.6.1.4.1.2544.1.12.4.1.60.1.12	LearningConfigAction	read-write	This objects allows performing user action on Learning Table.
LineBuildOut (3)
LIN bits8PortGroupLineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.78.1.13	LineBuildOut	read-write	This object allows to manage the line build out on the BITS 8 Port Group when the Line Type is T1.
LIN bitsPortLineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.16.1.19	LineBuildOut	read-write	This object allows to manage the line build out on the BITS-OUT port when the Line Type is T1.
LIN e1t1LineBuildOut	1.3.6.1.4.1.2544.1.12.4.1.50.1.17	LineBuildOut	read-write	This object represents Line Build Out on E1/T1 port.
LocationMode (1)
LOC f3GPSReceiverPortLocationMode	1.3.6.1.4.1.2544.1.12.4.1.57.1.34	LocationMode	read-write	This object allows to manage location mode for the GNSS receiver on OSA540X.
MacAddress (30)
MAC cmEthernetAccPortCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.2.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
MAC cmEthernetAccPortCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.2.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
MAC cmEthernetAccPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.13.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
MAC cmEthernetAccPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.118	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
MAC cmEthernetAccPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.104	MacAddress	read-write	This object allows to set Acc Port Destination MAC Address for frame matching when Acc Port Destination MAC Control is enabled.
MAC cmEthernetAccPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.103	MacAddress	read-write	This object allows to set Acc Port Source MAC Address for frame matching when Acc Port Source MAC Control is enabled.
MAC cmEthernetAccPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.58	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
MAC cmEthernetAccPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.1.1.99	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
MAC cmEthernetNetPortCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.8.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
MAC cmEthernetNetPortCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.8.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
MAC cmEthernetNetPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.15.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
MAC cmEthernetNetPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.107	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
MAC cmEthernetNetPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.96	MacAddress	read-write	This object allows to set Net Port Destination MAC Address for frame matching when Net Port Destination MAC Control is enabled.
MAC cmEthernetNetPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.95	MacAddress	read-write	This object allows to set Net Port Source MAC Address for frame matching when Net Port Source MAC Control is enabled.
MAC cmEthernetNetPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.58	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
MAC cmEthernetNetPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.7.1.91	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
MAC cmEthernetTrafficPortCpdV2L2PTTunnelMac	1.3.6.1.4.1.2544.1.12.4.1.97.1.29	MacAddress	read-write	Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.
MAC cmEthernetTrafficPortDiagnosticMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.124	MacAddress	read-only	This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
MAC cmEthernetTrafficPortLoopbackDestMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.120	MacAddress	read-write	This object allows to set Traffic Port Destination MAC Address for frame matching when Traffic Port Destination MAC Control is enabled.
MAC cmEthernetTrafficPortLoopbackSourceMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.119	MacAddress	read-write	This object allows to set Traffic Port Source MAC Address for frame matching when Traffic Port Source MAC Control is enabled.
MAC cmEthernetTrafficPortOamRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.47	MacAddress	read-only	This object allows retrieval of the Remote Mac Address.
MAC cmEthernetTrafficPortSSMRemoteMacAddress	1.3.6.1.4.1.2544.1.12.4.1.27.1.83	MacAddress	read-only	This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
MAC cmFlowCpdMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.5.1.6	MacAddress	read-write	This enables provides the Filter MAC Address Mask to match.
MAC cmFlowCpdMacAddressMatch	1.3.6.1.4.1.2544.1.12.4.1.5.1.5	MacAddress	read-write	This enables provides the Filter MAC Address to match.
MAC cmTrafficAclDstMacAddr	1.3.6.1.4.1.2544.1.12.4.1.38.1.7	MacAddress	read-write	The destination MAC address of Acl entry.
MAC cmTrafficAclSrcMacAddr	1.3.6.1.4.1.2544.1.12.4.1.38.1.5	MacAddress	read-write	The source mac address of Acl entry.
MAC f3AclRuleDstMacAddress	1.3.6.1.4.1.2544.1.12.4.1.99.1.12	MacAddress	read-write	The ACL rule dynamic Destination MAC address.
MAC f3AclRuleDstMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.99.1.13	MacAddress	read-write	The ACL rule dynamic Destination MAC address mask.
MAC f3AclRuleSrcMacAddress	1.3.6.1.4.1.2544.1.12.4.1.99.1.9	MacAddress	read-write	The ACL rule dynamic Source MAC address.
MAC f3AclRuleSrcMacAddressMask	1.3.6.1.4.1.2544.1.12.4.1.99.1.10	MacAddress	read-write	The ACL rule dynamic Source MAC address mask.
MultiplexingStructure (1)
MUL ocnStmMultiplexingStructures	1.3.6.1.4.1.2544.1.12.4.1.47.1.16	MultiplexingStructure	read-write	This object provides the TDM Multiplexing Structure base on OCn/STM interface.
OCNSTMPortType (1)
OCN ocnStmPortType	1.3.6.1.4.1.2544.1.12.4.1.47.1.33	OCNSTMPortType	read-only	This object represents the OCN/STM Port Type. Determines whether the OCN/STM port operates in OC or STM mode.
OperationalState (41)
OPE bits8PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.78.1.4	OperationalState	read-only	This object represents the Operational State of the BITS 8 Port Group.
OPE bitsPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.16.1.6	OperationalState	read-only	This object represents the Operational State of the BITS Port.
OPE ccInputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.111.1.6	OperationalState	read-only	This object represents the Operational State of the CC input Port.
OPE clk16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.80.1.4	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
OPE cmAccPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.12.1.4	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
OPE cmElineFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.28.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
OPE cmEthernetAccPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.1.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Access Port.
OPE cmEthernetMgmtPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.9.1.4	OperationalState	read-only	This object represents the Operational State of the Ethernet Management Port.
OPE cmEthernetNetPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.7.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Network Port.
OPE cmEthernetTrafficPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.27.1.5	OperationalState	read-only	This object represents the Operational State of the Ethernet Port.
OPE cmFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.4.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
OPE cmFlowPointOperationalState	1.3.6.1.4.1.2544.1.12.4.1.29.1.4	OperationalState	read-only	This object represents the Operational State of the FlowPoint.
OPE cmMPFlowOperationalState	1.3.6.1.4.1.2544.1.12.4.1.60.1.4	OperationalState	read-only	This object represents the Operational State of the Flow.
OPE cmOAMFlowPointOperationalState	1.3.6.1.4.1.2544.1.12.4.1.30.1.4	OperationalState	read-only	This object represents the Operational State of the OAMFlowPoint.
OPE cmQosFlowPolicerOperationalState	1.3.6.1.4.1.2544.1.12.4.1.11.1.5	OperationalState	read-only	This object represents the Operational State of the QOS Flow Policer.
OPE cmQosPolicerV2OperationalState	1.3.6.1.4.1.2544.1.12.4.1.41.1.3	OperationalState	read-only	This object represents the Operational State of the QOS Policer.
OPE cmQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.6.1.5	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
OPE cmQosShaperV2OperationalState	1.3.6.1.4.1.2544.1.12.4.1.42.1.3	OperationalState	read-only	This object represents the Operational State of the QOS ShaperV2.
OPE cmTrafficPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.43.1.3	OperationalState	read-only	This object represents the Operational State of the QOS ShaperV2.
OPE e1t1OperationalState	1.3.6.1.4.1.2544.1.12.4.1.50.1.6	OperationalState	read-only	This object represents the Operational State of the E1/T1.
OPE e3t3OperationalState	1.3.6.1.4.1.2544.1.12.4.1.51.1.6	OperationalState	read-only	This object represents the Operational State of the E3/T3.
OPE f3FpQosPolicerOperationalState	1.3.6.1.4.1.2544.1.12.4.1.96.1.3	OperationalState	read-only	This object represents the Operational State of a Policer.
OPE f3FpQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.95.1.3	OperationalState	read-only	This object represents the Operational State of a Shaper.
OPE f3GPSReceiverPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.57.1.5	OperationalState	read-only	This object represents the Operational State of the GPS Receiver Port.
OPE f3IrigOpticalOutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.107.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
OPE f3IrigOutputUnitPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.110.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
OPE f3IrigRelayOutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.108.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
OPE f3IrigRs422OutputPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.106.1.6	OperationalState	read-only	This object represents the operational state of the IRIG output port.
OPE f3NetPortQosShaperOperationalState	1.3.6.1.4.1.2544.1.12.4.1.45.1.4	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
OPE f3PulsePerSecondPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.53.1.5	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
OPE f3TimeOfDayPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.55.1.5	OperationalState	read-only	This object represents the Operational State of the Time Of Day Port.
OPE f3Usb3GDCNPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.46.1.5	OperationalState	read-only	This object represents the Operational State of the G3 DCN Port.
OPE f3UsbWIFIDonglePortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.77.1.5	OperationalState	read-only	This object represents the Operational State of this Port.
OPE gps10MHzPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.18.1.5	OperationalState	read-only	This object represents the Operational State of the Port.
OPE ieee1588EthernetPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.17.1.5	OperationalState	read-only	This object represents the Operational State of the Port.
OPE ocnStmOperationalState	1.3.6.1.4.1.2544.1.12.4.1.47.1.5	OperationalState	read-only	This object represents the Operational State of the OCn/STM interface.
OPE pps16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.79.1.4	OperationalState	read-only	This object represents the Operational State of the Pulse Per Second Port.
OPE sciPortOperationalState	1.3.6.1.4.1.2544.1.12.4.1.105.1.3	OperationalState	read-only	This object represents the Operational State of the SCI Port.
OPE stsVcPathOperationalState	1.3.6.1.4.1.2544.1.12.4.1.48.1.5	OperationalState	read-only	This object represents the Operational State of the OCn Path.
OPE todPps16PortGroupOperationalState	1.3.6.1.4.1.2544.1.12.4.1.81.1.4	OperationalState	read-only	This object represents the Operational State of the Time Of Day Port.
OPE vtVcPathOperationalState	1.3.6.1.4.1.2544.1.12.4.1.49.1.5	OperationalState	read-only	This object represents the Operational State of the OCn VT1.5/VC12.
OutOfBandChannelStatus (1)
OUT cmEthernetTrafficPortPlugOutOfBandChannelStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.160	OutOfBandChannelStatus	read-only	Status of the out of band channel between the local and remote plug.
PcpDEEncType (7)
PCP cmEthernetAccPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.1.1.97	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag.
PCP cmEthernetNetPortEncapPcpDEEncodingType	1.3.6.1.4.1.2544.1.12.4.1.7.1.116	PcpDEEncType	read-write	This is a port level control the mode of drop eligibility encoding in PCP bits of the VLAN tag in encapsulation header.
PCP cmEthernetNetPortExpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.112	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in exp bits of the VLAN tag.
PCP cmEthernetNetPortIpPrecDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.114	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in Ip Prec bits of the VLAN tag.
PCP cmEthernetNetPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.7.1.89	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag.
PCP cmEthernetTrafficPortExpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.27.1.128	PcpDEEncType	read-write	This is a port level control that specifies the mode of drop eligibility encoding in exp bits of the VLAN tag.
PCP cmEthernetTrafficPortPcpDEEncType	1.3.6.1.4.1.2544.1.12.4.1.27.1.92	PcpDEEncType	read-write	This object describes the PCP encoding mode for egress packets and the PCP decoding mode for ingress packets on this port.
PcpDEPairsAction (7)
PCP cmEthernetAccPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.98	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetAccPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmAccPortPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PCP cmEthernetNetPortEncapPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.117	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortEncapPcpDEEncodingType is of type 7p1d, 6p2d, 5p3d, the cmNetPortEncapPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PCP cmEthernetNetPortExpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.113	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortExpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortExpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PCP cmEthernetNetPortIpPrecDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.115	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Ip Prec Drop Eligibility Pairs. When the cmEthernetNetPortIpPrecDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortIpPrecDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PCP cmEthernetNetPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.90	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PCP cmEthernetTrafficPortExpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.129	PcpDEPairsAction	read-write	This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetTrafficPortExpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmEthernetTrafficPortExpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility.
PCP cmEthernetTrafficPortPcpDEPairsAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.93	PcpDEPairsAction	read-write	This object describes this port pcp de pairs action.
PhysicalIndex (22)
PHY bitsPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.16.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY ccGroupEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.112.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this input port as an entity in entityPhysical entries with entPhysicalIndex value.
PHY ccInputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.111.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this input port as an entity in entityPhysical entries with entPhysicalIndex value.
PHY cmEthernetAccPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.1.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY cmEthernetMgmtPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.9.1.2	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY cmEthernetNetPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.7.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY cmEthernetTrafficPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.27.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY e1t1EntityIndex	1.3.6.1.4.1.2544.1.12.4.1.50.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY e3t3EntityIndex	1.3.6.1.4.1.2544.1.12.4.1.51.1.4	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY f3GPSReceiverPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.57.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY f3IrigOpticalOutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.107.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
PHY f3IrigOutputGroupEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.109.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
PHY f3IrigOutputUnitPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.110.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
PHY f3IrigRelayOutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.108.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
PHY f3IrigRs422OutputPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.106.1.3	PhysicalIndex	read-only	An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value.
PHY f3PulsePerSecondPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.53.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY f3TimeOfDayPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.55.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY f3Usb3GDCNPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.46.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY f3UsbWIFIDonglePortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.77.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY gps10MHzPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.18.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY ieee1588EthernetPortEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.17.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this port.
PHY ocnStmEntityIndex	1.3.6.1.4.1.2544.1.12.4.1.47.1.3	PhysicalIndex	read-only	Entity Index from ENTITY-MIB for this OCn/STM interface.
PlugMode (1)
PLU cmEthernetTrafficPortPlugMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.154	PlugMode	read-write	This specifies if the plug is acting as head-end or tail-end.
PlugType (1)
PLU cmEthernetTrafficPortPlugType	1.3.6.1.4.1.2544.1.12.4.1.27.1.153	PlugType	read-write	This specifies the port's plug type.
PoEStatus (1)
POE cmEthernetAccPortPoEStatus	1.3.6.1.4.1.2544.1.12.4.1.1.1.140	PoEStatus	read-only	This object provides the status of Power Over Ethernet Detection.
PolicerAlgorithmType (2)
POL cmQosFlowPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.4.1.11.1.13	PolicerAlgorithmType	read-only	This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
POL f3FpQosPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.4.1.96.1.11	PolicerAlgorithmType	read-only	This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
PolicerColorMode (3)
POL cmQosFlowPolicerColorMode	1.3.6.1.4.1.2544.1.12.4.1.11.1.14	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
POL cmQosPolicerProfileColorMode	1.3.6.1.4.1.2544.1.12.4.1.39.1.9	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
POL f3FpQosPolicerColorMode	1.3.6.1.4.1.2544.1.12.4.1.96.1.12	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
PolicingControl (1)
POL cmFlowPolicingControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.51	PolicingControl	read-create	This object specifies the direction(s) in which Poling is enabled on traffic within this Flow when cmFlowPolicingEnabled is TRUE.
PortState (2)
POR bits8PortGroupActivePorts	1.3.6.1.4.1.2544.1.12.4.1.78.1.16	PortState	read-write	This object represents the Active State for each port of the BITS 8 Port Group.
POR bits8PortGroupClkIfEnabledPorts	1.3.6.1.4.1.2544.1.12.4.1.78.1.17	PortState	read-write	This object represents the Clock Enabling State for each port of the BITS 8 Port Group.
PPPoEConnectionStatus (1)
PPP cmEthernetNetPortPppoeConnStatus	1.3.6.1.4.1.2544.1.12.4.1.103.1.15	PPPoEConnectionStatus	read-only	This object provides the connection status of pppoe connection.
PPSGenCondition (1)
PPS f3GPSReceiverPortPPSGenCondition	1.3.6.1.4.1.2544.1.12.4.1.57.1.7	PPSGenCondition	read-write	This object allows for configuration of the PPS generation condition. PPS is generated when at least one satellite is tracked or when at least three satellites are tracked.
PPSInputRate (2)
PPS f3PulsePerSecondPortInputRate	1.3.6.1.4.1.2544.1.12.4.1.53.1.11	PPSInputRate	read-write	This object allows specification of the PPS Input Rate.
PPS f3TimeOfDayPortInputRate	1.3.6.1.4.1.2544.1.12.4.1.55.1.12	PPSInputRate	read-write	This object allows specification of the Time Of Day Input Rate.
PPSPhyInterfaceType (1)
NUM f3PulsePerSecondPortPhyInterfaceType	1.3.6.1.4.1.2544.1.12.4.1.53.1.16	PPSPhyInterfaceType	read-write	This object specify PPS physical interface type.
PpsPolarity (1)
PPS f3PulsePerSecondPortPolarity	1.3.6.1.4.1.2544.1.12.4.1.53.1.19	PpsPolarity	read-write	This object allows specification of the Polarity of the PPS signal on the PPS Port.
PpsPortImpedanceMode (1)
PPS f3PulsePerSecondPortImpedance	1.3.6.1.4.1.2544.1.12.4.1.53.1.20	PpsPortImpedanceMode	read-write	This object allows specification of the impedance mode for an input PPS port. It is only an indication and cannot be set for an output PPS Port.
PrioMapControlType (3)
PRI cmEgressOuterTagCtrl	1.3.6.1.4.1.2544.1.12.4.1.32.1.3	PrioMapControlType	read-write	This object defines the behavior of the Priority portion of the frame transmit out. If NONE is selected, the outgoing priority bits are left unchanged. If SWAP is selected, the priority bits are changed by the value specified in the Outer-Tag Priority parameter.
PRI cmPrioMapV2PrioMappingPriPrioControl	1.3.6.1.4.1.2544.1.12.4.1.73.1.3	PrioMapControlType	read-write	This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapV2XTagPriority.
PRI cmPrioMapXTagControl	1.3.6.1.4.1.2544.1.12.4.1.10.1.3	PrioMapControlType	read-write	This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapXTagPriority.
PriorityMapMode (4)
PRI cmEthernetAccPortPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.1.1.89	PriorityMapMode	read-write	This object allows to specify the Ethernet Access Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented, evpl service type.
PRI cmEthernetNetPortPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.7.1.87	PriorityMapMode	read-only	This object provides the Priority Mapping Mode used for classification of frames.
PRI cmEthernetTrafficPortIngressPrioMapMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.72	PriorityMapMode	read-write	This object allows to specify the Ethernet Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented, evpl service type.
PRI cmPrioMapV2ProfileMapModeType	1.3.6.1.4.1.2544.1.12.4.1.70.1.3	PriorityMapMode	read-write	The integer index value describes the profile PriorityMapMode.
PSENonStandardPD (1)
PSE pethMainPseExtNonStandardPD	1.3.6.1.4.1.2544.1.12.4.1.59.1.2	PSENonStandardPD	read-write	disabled: don't support non-standard PD, enabled: support non-standard PD
PsePowerLevel (1)
PSE pethPsePortExtAvailablePowerLevel	1.3.6.1.4.1.2544.1.12.4.1.58.1.5	PsePowerLevel	read-write	This object means the pse port available power level.
RelativeChannelIdentifier (2)
OID cmEthernetTrafficPortPlugRelativeChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.158	RelativeChannelIdentifier	read-write	If Channel Type is RELATIVE-CHANNEL-NUMBER, this is the local plug's relative channel.
OID cmEthernetTrafficPortRemotePlugRelativeChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.162	RelativeChannelIdentifier	read-write	If Channel Type is RELATIVE-CHANNEL-NUMBER, this is the remote plug's relative channel.
RowStatus (34)
ROW bits8PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.78.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of bits8PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with bits8PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The bits8PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW clk16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.80.1.10	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with clk16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmElineFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.28.1.9	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmElineFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmElineFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmElineFlowRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmEncapFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.113.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmEncapFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmEncapFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmEncapFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmEthernetTrafficPortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.27.1.82	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmEthernetTrafficPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmEthernetTrafficPortRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmFlowPointCpdProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.34.1.30	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmCpdProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmCpdProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmCpdProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.29.1.24	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.4.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
ROW cmMPFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.61.1.2	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMPFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMPFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
ROW cmMPFlowRowStatus	1.3.6.1.4.1.2544.1.12.4.1.60.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMPFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMPFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
ROW cmOAMFlowPointRowStatus	1.3.6.1.4.1.2544.1.12.4.1.30.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmOAMFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmOAMFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmOAMFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmPortCpdProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.33.1.30	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmCpdProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmCpdProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmCpdProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmPrioMapV2ProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.70.1.5	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmPrioMapV2ProfileStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmPrioMapV2ProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmPrioMapV2ProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmQosFlowPolicerRowStatus	1.3.6.1.4.1.2544.1.12.4.1.11.1.19	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosFlowPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosFlowPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosFlowPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmQosPolicerProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.39.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosPolicerProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosPolicerProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosPolicerProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmQosPolicerV2RowStatus	1.3.6.1.4.1.2544.1.12.4.1.41.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosPolicerV2RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosPolicerV2RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosPolicerV2RowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmQosQueueProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.40.1.6	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosQueueProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosQueueProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosQueueProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.6.1.13	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmQosShaperV2RowStatus	1.3.6.1.4.1.2544.1.12.4.1.42.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosShaperV2RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosShaperV2RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosShaperV2RowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmTrafficAclProfileRowStatus	1.3.6.1.4.1.2544.1.12.4.1.37.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficAclProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficAclProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficAclProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmTrafficAclRowStatus	1.3.6.1.4.1.2544.1.12.4.1.38.1.35	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficAclRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficAclRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficAclRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW cmTrafficPortQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.43.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficPortQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficPortQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficPortQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW e1t1RowStatus	1.3.6.1.4.1.2544.1.12.4.1.50.1.13	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of e1t1RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with e1t1RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The e1t1RowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW e3t3RowStatus	1.3.6.1.4.1.2544.1.12.4.1.51.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of e3t3RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with e3t3RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The e3t3RowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW f3AclRuleRowStatus	1.3.6.1.4.1.2544.1.12.4.1.99.1.50	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW f3FpQosPolicerRowStatus	1.3.6.1.4.1.2544.1.12.4.1.96.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3FpQosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3FpQosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3FpQosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW f3FpQosShaperRowStatus	1.3.6.1.4.1.2544.1.12.4.1.95.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3FpQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3FpQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3FpQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW f3PolicerEnvelopeRowStatus	1.3.6.1.4.1.2544.1.12.4.1.82.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PolicerEnvelopeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UsbWIFIDonglePortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PolicerEnvelopeRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
ROW f3Usb3GDCNPortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.46.1.34	RowStatus	read-write	The status of this row. The f3Usb3GDCNPortRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
ROW f3UsbWIFIDonglePortRowStatus	1.3.6.1.4.1.2544.1.12.4.1.77.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3UsbWIFIDonglePortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UsbWIFIDonglePortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3UsbWIFIDonglePortRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode.
ROW pps16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.79.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pps16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pps16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pps16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW stsVcPathRowStatus	1.3.6.1.4.1.2544.1.12.4.1.48.1.20	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stsVcPathRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stsVcPathRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stsVcPathRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW todPps16PortGroupRowStatus	1.3.6.1.4.1.2544.1.12.4.1.81.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with todPps16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
ROW vtVcPathRowStatus	1.3.6.1.4.1.2544.1.12.4.1.49.1.20	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of vtVcPathRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with vtVcPathRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The vtVcPathRowStatus object may be modified if the associated instance of this object is equal to active(1).
RxDeiAction (3)
RXD cmEthernetAccPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.106	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
RXD cmEthernetNetPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.98	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
RXD cmEthernetTrafficPortRxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.111	RxDeiAction	read-write	This object allows to specify the Receive DEI Action.
SaBitDesignation (2)
SAB bits8PortGroupSaBitDesignation	1.3.6.1.4.1.2544.1.12.4.1.78.1.9	SaBitDesignation	read-write	This object represents the BITS 8 Port Group Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is None. For E1 Line Type, the default value is bit4 and it can only have a value of None if QL Mode is disabled, otherwise, None is an invalid value.
SAB bitsPortSaBitDesignation	1.3.6.1.4.1.2544.1.12.4.1.16.1.12	SaBitDesignation	read-write	This object represents the BITS Port Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is None. For E1 Line Type, the default value is bit4 and it can only have a value of None if QL Mode is disabled, otherwise, None is an invalid value.
SaBitsState (1)
SAB bitsPortSaBitsAdminState	1.3.6.1.4.1.2544.1.12.4.1.16.1.24	SaBitsState	read-write	This object allows to manage the five Sa Bit values, from bit4 to bit8, for the BITS-OUT port. The object value is a BIT string that concatenate the Sa Bit values. The Sa Bit values are applied to each of the five Sa Bits of the output signal except to the one that carries SSM information when QL Mode is enabled.
SatelliteHealth (1)
SAT f3SatelliteHealth	1.3.6.1.4.1.2544.1.12.4.1.93.1.6	SatelliteHealth	read-only	This object indicates the Satellite Entry Health.
SciRxSsmQL (1)
SCI sciPortRxSsmQL	1.3.6.1.4.1.2544.1.12.4.1.105.1.6	SciRxSsmQL	read-write	This object allows to manage the RX QL of the SCI port.
SciSignalDirection (1)
SCI sciPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.105.1.5	SciSignalDirection	read-write	This object allows to manage the signal direction of the SCI port.
SciSignalMode (1)
SCI sciPortSignalMode	1.3.6.1.4.1.2544.1.12.4.1.105.1.4	SciSignalMode	read-write	This object allows to manage the signal mode of the SCI port.
SecondaryState (40)
SEC bits8PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.78.1.5	SecondaryState	read-only	This object represents the Secondary State of the BITS 8 Port Group.
SEC bitsPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.16.1.7	SecondaryState	read-only	This object represents the Secondary State of the BITS Port.
SEC ccInputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.111.1.7	SecondaryState	read-only	This object represents the Secondary State of the CC input port.
SEC clk16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.80.1.5	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
SEC cmAccPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.12.1.5	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
SEC cmElineFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.28.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
SEC cmEthernetAccPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.1.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Access Port.
SEC cmEthernetMgmtPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.9.1.5	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Management Port.
SEC cmEthernetNetPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.7.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Network Port.
SEC cmEthernetTrafficPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.27.1.6	SecondaryState	read-only	This object represents the Secondary State of the Ethernet Port.
SEC cmFlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.29.1.5	SecondaryState	read-only	This object represents the Secondary State of the FlowPoint.
SEC cmFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.4.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
SEC cmMPFlowSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.60.1.5	SecondaryState	read-only	This object represents the Secondary State of the Flow.
SEC cmOAMFlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.30.1.5	SecondaryState	read-only	This object represents the Secondary State of the OAMFlowPoint.
SEC cmQosFlowPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.11.1.6	SecondaryState	read-only	This object represents the Secondary State of the QOS Flow Policer.
SEC cmQosPolicerV2SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.41.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS Policer.
SEC cmQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.6.1.6	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
SEC cmQosShaperV2SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.42.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS QosShaperV2.
SEC cmTrafficPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.43.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS LagQosShaper.
SEC e1t1SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.50.1.7	SecondaryState	read-only	This object represents the Secondary State of the E1/T1.
SEC e3t3SecondaryState	1.3.6.1.4.1.2544.1.12.4.1.51.1.7	SecondaryState	read-only	This object represents the Secondary State of the E3/T3.
SEC f3FpQosPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.96.1.4	SecondaryState	read-only	This object represents the Secondary State of a Policer.
SEC f3FpQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.95.1.4	SecondaryState	read-only	This object represents the Secondary State of the Shaper.
SEC f3GPSReceiverPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.57.1.6	SecondaryState	read-only	This object represents the Secondary State of the GPS Receiver Port.
SEC f3IrigOpticalOutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.107.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
SEC f3IrigOutputUnitPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.110.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
SEC f3IrigRelayOutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.108.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
SEC f3IrigRs422OutputPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.106.1.7	SecondaryState	read-only	This object represents the Secondary State of the IRIG output port.
SEC f3NetPortQosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.45.1.5	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
SEC f3PulsePerSecondPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.53.1.6	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
SEC f3TimeOfDayPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.55.1.6	SecondaryState	read-only	This object represents the Secondary State of the Time Of Day Port.
SEC f3Usb3GDCNPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.46.1.6	SecondaryState	read-only	This object represents the Secondary State of the G3 DCN Port.
SEC f3UsbWIFIDonglePortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.77.1.6	SecondaryState	read-only	This object represents the Secondary State of this Port.
SEC gps10MHzPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.18.1.6	SecondaryState	read-only	This object represents the Secondary State of the Port.
SEC ieee1588EthernetPortSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.17.1.6	SecondaryState	read-only	This object represents the Secondary State of the Port.
SEC ocnStmSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.47.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn/STM interface.
SEC pps16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.79.1.5	SecondaryState	read-only	This object represents the Secondary State of the Pulse Per Second Port.
SEC stsVcPathSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.48.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn Path.
SEC todPps16PortGroupSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.81.1.5	SecondaryState	read-only	This object represents the Secondary State of the Time Of Day Port.
SEC vtVcPathSecondaryState	1.3.6.1.4.1.2544.1.12.4.1.49.1.6	SecondaryState	read-only	This object represents the Secondary State of the OCn VT1.5/VC12.
SfpChannelIdentifier (3)
OID cmEthernetAccPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.1.1.110	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
OID cmEthernetNetPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.7.1.102	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
OID cmEthernetTrafficPortLaserWDMChannel	1.3.6.1.4.1.2544.1.12.4.1.27.1.88	SfpChannelIdentifier	read-write	Channel number of WDM tunable XFP setting.
SfpConnectorValue (5)
SFP cmEthernetAccPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.1.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
SFP cmEthernetNetPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.7.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
SFP cmEthernetTrafficPortRemoteSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.174	SfpConnectorValue	read-only	This object provides Connector Type of the Remote SFP.
SFP cmEthernetTrafficPortSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.17	SfpConnectorValue	read-only	This object provides the SFP connector value. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.
SFP ocnStmSfpConnectorValue	1.3.6.1.4.1.2544.1.12.4.1.47.1.11	SfpConnectorValue	read-only	This object provides the SFP connector value.
SfpIdentifierValue (4)
OID cmEthernetAccPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.1.1.141	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
OID cmEthernetNetPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.7.1.134	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
OID cmEthernetTrafficPortRemoteSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.175	SfpIdentifierValue	read-only	This object provides the Remote SFP identifier value.
OID cmEthernetTrafficPortSfpIdentifierValue	1.3.6.1.4.1.2544.1.12.4.1.27.1.152	SfpIdentifierValue	read-only	This object provides the SFP identifier value.
SfpMediaType (5)
SFP cmEthernetAccPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.1.1.73	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.
SFP cmEthernetNetPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.7.1.71	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
SFP cmEthernetTrafficPortRemoteSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.173	SfpMediaType	read-only	This object provides Media Type of the Remote SFP.
SFP cmEthernetTrafficPortSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.27.1.20	SfpMediaType	read-only	This object provides the SFP Media Type. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.
SFP ocnStmSfpMediaType	1.3.6.1.4.1.2544.1.12.4.1.47.1.15	SfpMediaType	read-only	This object provides the SFP Media Type.
ShapingType (3)
SHA cmFlowA2NShapingType	1.3.6.1.4.1.2544.1.12.4.1.4.1.45	ShapingType	read-create	This object is used to specify whether the traffic in A2N direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbased flows the value of this attribute is flow-based and cannot be changed. In case of regular and default flows Fsp150 products may support both port-based and flow-based shaping.
SHA cmFlowN2AShapingType	1.3.6.1.4.1.2544.1.12.4.1.4.1.46	ShapingType	read-create	This object is used to specify whether the traffic in N2A direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbased flows the value of this attribute is flow-based and cannot be changed. In case of regular and default flows Fsp150 products may support both port-based and flow-based shaping.
SHA cmFlowPointEgressShapingType	1.3.6.1.4.1.2544.1.12.4.1.29.1.45	ShapingType	read-write	This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
SignalDirectionType (5)
SIG clk16PortGroupDirection	1.3.6.1.4.1.2544.1.12.4.1.80.1.7	SignalDirectionType	read-only	This object allows specification of the signal type (i.e. input or output).
SIG f3PulsePerSecondPortDirection	1.3.6.1.4.1.2544.1.12.4.1.53.1.10	SignalDirectionType	read-write	This object allows specification of the signal type (i.e. input or output).
SIG f3TimeOfDayPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.55.1.11	SignalDirectionType	read-write	This object allows specification of the signal direction type (i.e. input or output).
SIG gps10MHzPortSignalDirection	1.3.6.1.4.1.2544.1.12.4.1.18.1.7	SignalDirectionType	read-write	This object allows specification of the signal type (i.e. input or output).
SIG pps16PortGroupDirection	1.3.6.1.4.1.2544.1.12.4.1.79.1.9	SignalDirectionType	read-only	This object allows specification of the signal type (i.e. input or output).
SignalFrequency (1)
SIG bitsPortSignalFrequency	1.3.6.1.4.1.2544.1.12.4.1.16.1.27	SignalFrequency	read-write	Indicates the signal frequency of the port. Possible value are 100 kHz, 1 MHz, 1544 kHz, 2048 kHz, 5 MHz, 25 Mhz or 50 MHz. It can be set only to a port that is dedicated to yield a variety of frequencies.
SignalShape (1)
SIG bitsPortSignalShape	1.3.6.1.4.1.2544.1.12.4.1.16.1.26	SignalShape	read-only	This object represents the Port Signal Shape. Indicates whether the signal has a sine or a square shape.
SquelchControl (7)
SQU bitsPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.16.1.25	SquelchControl	read-only	This object indicates the Squelch Control for the port. The Squelch Control determines the type of squelch control used to squelch an output of the port.
SQU clk16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.80.1.8	SquelchControl	read-only	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SQU f3PulsePerSecondPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.53.1.7	SquelchControl	read-write	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SQU f3TimeOfDayPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.55.1.7	SquelchControl	read-write	This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SQU gps10MHzPortSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.18.1.8	SquelchControl	read-write	This object allows to set the Squelch Control for the 10MHz port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port. Only option supported is squelch-ql.
SQU pps16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.79.1.7	SquelchControl	read-only	This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SQU todPps16PortGroupSquelchControl	1.3.6.1.4.1.2544.1.12.4.1.81.1.7	SquelchControl	read-only	This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port.
SSMQualityLevel (29)
SSM bits8PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.78.1.12	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the BITS 8 Port Group. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determine whether or not to squelch the output of the BITS 8 Port Group. If the system's QL is lower than the Squelch QL, the output is squelched. If the BITS group's QL Mode is disabled, then the received QL value is not applicable.
SSM bits8PortGroupTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.78.1.11	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the BITS 8 Port Group. If the BITS group's QL Mode is disabled, then the received QL value is not applicable.
SSM bitsPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.15	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the BITS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM bitsPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.14	SSMQualityLevel	read-write	This object allows to specify the expected QL when the BITS Port is enabled for QL Mode. This object allows the user to set a minimum expected received Quality Level on the port. The default value shall be None.
SSM bitsPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.16	SSMQualityLevel	read-only	This object provides the Received QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
SSM bitsPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.18	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the BITS-OUT port. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determine whether or not to squelch the output of the BITS-OUT port. If the system's QL is lower than the Squelch QL, the output is squelched. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
SSM bitsPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.16.1.17	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
SSM clk16PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.80.1.9	SSMQualityLevel	read-only	This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
SSM cmEthernetAccPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.93	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Access Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM cmEthernetAccPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.92	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Access Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetAccPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
SSM cmEthernetAccPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.94	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
SSM cmEthernetAccPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.1.1.95	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
SSM cmEthernetNetPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.84	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Network Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM cmEthernetNetPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.83	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Network Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetNetPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
SSM cmEthernetNetPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.85	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
SSM cmEthernetNetPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.7.1.86	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
SSM cmEthernetTrafficPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.77	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the Ethernet Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port TransmitQL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM cmEthernetTrafficPortExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.76	SSMQualityLevel	read-write	This object allows to specify the expected QL when the Ethernet Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
SSM cmEthernetTrafficPortReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.78	SSMQualityLevel	read-only	This object provides the Received QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports.
SSM cmEthernetTrafficPortTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.79	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports.
SSM f3PulsePerSecondPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.53.1.8	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the Pulse Per Second port. This value is used when f3PulsePerSecondPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
SSM f3TimeOfDayPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.55.1.8	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the Time Of Day port. This value is used when f3TimeOfDayPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
SSM gps10MHzPortAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.18.1.14	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the GPS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM gps10MHzPortSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.18.1.9	SSMQualityLevel	read-write	This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
SSM ocnStmAssumedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.30	SSMQualityLevel	read-write	This object allows to specify the assumed QL on the OCn/STM interface. This object is only applicable for Synchronous OCn/STM interface. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port TransmitQL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference.
SSM ocnStmExpectedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.29	SSMQualityLevel	read-write	This object allows to specify the expected QL when the OCn/STM interface is enabled for QL Mode. This object is only applicable for Synchronous OCn/STM interface, when ocnStmQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None.
SSM ocnStmReceivedQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.31	SSMQualityLevel	read-only	This object provides the Received QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous OCn/STM interface.
SSM ocnStmTransmitQL	1.3.6.1.4.1.2544.1.12.4.1.47.1.32	SSMQualityLevel	read-only	This object provides the Transmitted QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous OCn/STM interface.
SSM todPps16PortGroupSquelchQL	1.3.6.1.4.1.2544.1.12.4.1.81.1.8	SSMQualityLevel	read-only	This object allows to set the Squelch QL for the Time Of Day port. This value is used when todPps16PortGroupSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.
StorageType (24)
STO cmElineFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.28.1.8	StorageType	read-create	The type of storage configured for this entry.
STO cmEncapFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.113.1.14	StorageType	read-create	The type of storage configured for this entry.
STO cmFlowPointCpdProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.34.1.29	StorageType	read-create	The type of storage configured for this entry.
STO cmFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.29.1.23	StorageType	read-create	The type of storage configured for this entry.
STO cmFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.4.1.13	StorageType	read-create	The type of storage configured for this entry.
STO cmMPFlowStorageType	1.3.6.1.4.1.2544.1.12.4.1.60.1.10	StorageType	read-create	The type of storage configured for this entry.
STO cmOAMFlowPointStorageType	1.3.6.1.4.1.2544.1.12.4.1.30.1.11	StorageType	read-create	The type of storage configured for this entry.
STO cmPortCpdProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.33.1.29	StorageType	read-create	The type of storage configured for this entry.
STO cmPrioMapV2ProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.70.1.4	StorageType	read-create	The type of storage configured for this entry.
STO cmQosFlowPolicerStorageType	1.3.6.1.4.1.2544.1.12.4.1.11.1.18	StorageType	read-create	The type of storage configured for this entry.
STO cmQosPolicerProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.39.1.11	StorageType	read-create	The type of storage configured for this entry.
STO cmQosPolicerV2StorageType	1.3.6.1.4.1.2544.1.12.4.1.41.1.7	StorageType	read-create	The type of storage configured for this entry.
STO cmQosQueueProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.40.1.5	StorageType	read-create	The type of storage configured for this entry.
STO cmQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.6.1.12	StorageType	read-create	The type of storage configured for this entry.
STO cmQosShaperV2StorageType	1.3.6.1.4.1.2544.1.12.4.1.42.1.11	StorageType	read-create	The type of storage configured for this entry.
STO cmTrafficAclProfileStorageType	1.3.6.1.4.1.2544.1.12.4.1.37.1.3	StorageType	read-create	The type of storage configured for this entry.
STO cmTrafficAclStorageType	1.3.6.1.4.1.2544.1.12.4.1.38.1.34	StorageType	read-create	The type of storage configured for this entry.
STO cmTrafficPortQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.43.1.11	StorageType	read-create	The type of storage configured for this entry.
STO f3AclRuleStorageType	1.3.6.1.4.1.2544.1.12.4.1.99.1.49	StorageType	read-create	The type of storage configured for this entry.
STO f3FpQosPolicerStorageType	1.3.6.1.4.1.2544.1.12.4.1.96.1.15	StorageType	read-create	The type of storage configured for this entry.
STO f3FpQosShaperStorageType	1.3.6.1.4.1.2544.1.12.4.1.95.1.13	StorageType	read-create	The type of storage configured for this entry.
STO f3PolicerEnvelopeStorageType	1.3.6.1.4.1.2544.1.12.4.1.82.1.3	StorageType	read-create	The type of storage configured for this entry.
STO f3Usb3GDCNPortStorageType	1.3.6.1.4.1.2544.1.12.4.1.46.1.33	StorageType	read-create	The type of storage configured for this entry.
STO f3UsbWIFIDonglePortStorageType	1.3.6.1.4.1.2544.1.12.4.1.77.1.15	StorageType	read-create	The type of storage configured for this entry.
SynceMode (1)
SYN cmEthernetTrafficPortSyncEMode	1.3.6.1.4.1.2544.1.12.4.1.27.1.133	SynceMode	read-write	This object allows to manage SyncE mode (master or slave) on OSA540X ethernet port.
SynceRxSsmQl (1)
SYN cmEthernetTrafficPortRxSsmQL	1.3.6.1.4.1.2544.1.12.4.1.27.1.132	SynceRxSsmQl	read-write	This object allows to manage how RX quality level is utilized on OSA540X ethernet port.
TDMFrequencySourceType (1)
TDM ocnStmFreqSourceType	1.3.6.1.4.1.2544.1.12.4.1.47.1.34	TDMFrequencySourceType	read-write	This object represents the TDM Frequency source of OCN/STM port.
TDMPathType (2)
TDM ocnStmHighOrderPathType	1.3.6.1.4.1.2544.1.12.4.1.47.1.35	TDMPathType	read-write	This object provides the High Order Path Type of the OCn/STM interface.
TDM stsVcPathLowOrderPathType	1.3.6.1.4.1.2544.1.12.4.1.48.1.21	TDMPathType	read-write	This object provides the low Order Path Type of the sts vc interface.
TimeAdvanceMode (1)
TIM f3GPSReceiverPortTimeAdvanceMode	1.3.6.1.4.1.2544.1.12.4.1.57.1.35	TimeAdvanceMode	read-write	This object allows to manage time advance mode for the GNSS on OSA540X.
TimeSource (2)
TIM f3PulsePerSecondPortTimeSource	1.3.6.1.4.1.2544.1.12.4.1.53.1.15	TimeSource	read-only	This object specify PPS port time source.
TIM gps10MHzPortTimeSource	1.3.6.1.4.1.2544.1.12.4.1.18.1.13	TimeSource	read-only	This object specify GPS port time source.
TODOutputFormat (2)
TOD f3TimeOfDayPortOutputFormat	1.3.6.1.4.1.2544.1.12.4.1.55.1.10	TODOutputFormat	read-write	This object allows to set the Output Format for the Time Of Day port. The Output Format is used to determine the type of output format of the TOD port.
TOD todPps16PortGroupOutputFormat	1.3.6.1.4.1.2544.1.12.4.1.81.1.10	TODOutputFormat	read-only	This object allows to set the Output Format for the Time Of Day port. The Output Format is used to determine the type of output format of the TOD port.
ToggleValue (4)
TOG cmEthernetAccPortPowerdDeviceDetection	1.3.6.1.4.1.2544.1.12.4.1.1.1.139	ToggleValue	read-write	This object allows to manage (enable/disable) Power Over Ethernet Detection.
TOG cmEthernetTrafficPortTxSsm	1.3.6.1.4.1.2544.1.12.4.1.27.1.131	ToggleValue	read-write	This object allows to manage (enable/disable) TX SMM on OSA540X ethernet port.
TOG f3GPSReceiverPortForcedAntennaConnected	1.3.6.1.4.1.2544.1.12.4.1.57.1.37	ToggleValue	read-write	This object allows to manage the antenna connected mode on OSA540X.
TOG f3GPSReceiverPortSelfSurveyControl	1.3.6.1.4.1.2544.1.12.4.1.57.1.32	ToggleValue	read-write	This object allows to enable or disable the automatic location control. When it is enabled, the location of the equipment is evaluated by GNSS Receiver. When it is disabled the position is given by Coordinate Lattitude, Coordinate Longitude, and Altitude.
TrafficDirection (4)
TRA cmAccPortQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.12.1.2	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
TRA cmQosFlowPolicerDirection	1.3.6.1.4.1.2544.1.12.4.1.11.1.3	TrafficDirection	read-create	This object is allows specification of Policer direction as 'a2n' or 'n2a'.
TRA cmQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.6.1.3	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
TRA f3NetPortQosShaperDirection	1.3.6.1.4.1.2544.1.12.4.1.45.1.2	TrafficDirection	read-only	The direction of the Quality of Service Shaper.
TrafficPortDeleteEntitiesAction (1)
TRA cmEthernetTrafficPortDeleteEntitiesAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.106	TrafficPortDeleteEntitiesAction	read-write	This object allows to delete esa entities relate this port and Cfm entities relate this port.
TrailTraceFormat (3)
TRA ocnStmTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.47.1.27	TrailTraceFormat	read-write	This object provides the J0 length mode on the OCn/STM interface.
TRA stsVcPathTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.48.1.13	TrailTraceFormat	read-write	This object provides the J1 length mode on the OCn Path.
TRA vtVcPathTrailTraceFormat	1.3.6.1.4.1.2544.1.12.4.1.49.1.13	TrailTraceFormat	read-only	This object provides the J2 length mode on the OCn VT1.5/VC12.
TruthValue (230)
T/F bits8PortGroupQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.78.1.10	TruthValue	read-write	This object allows to specify whether the BITS 8 Port Group can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
T/F bitsPortAis	1.3.6.1.4.1.2544.1.12.4.1.16.1.23	TruthValue	read-write	This object allows to set the AIS signal for the BITS-OUT port.
T/F bitsPortCrc4	1.3.6.1.4.1.2544.1.12.4.1.16.1.21	TruthValue	read-write	This object allows to include or not the CRC to the signal of the BITS-OUT port.
T/F bitsPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.16.1.13	TruthValue	read-write	This object allows to specify whether the BITS Port can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
T/F cmAccPortExtBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.4	TruthValue	read-write	Whether broadcast packets need be limited per port.
T/F cmAccPortExtCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.7	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
T/F cmAccPortExtMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.75.1.1	TruthValue	read-write	Whether multicast packets need be limited on this port.
T/F cmAccPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.22.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
T/F cmEncapFlowPointEgressInnerTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.113.1.12	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmEncapFlowPointEgressOuterTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.113.1.11	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmEthernetAccPortA2NPushPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.85	TruthValue	read-write	This object allows to specify whether cmEthernetAccPortPortVlanId value will be PUSHed on untagged frames or not in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetAccPortA2nSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.115	TruthValue	read-write	This object allows to Enable/Disable the Swapping of Priority Vlan Id in the A2N direction.
T/F cmEthernetAccPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.81	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
T/F cmEthernetAccPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.3.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
T/F cmEthernetAccPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.1.1.96	TruthValue	read-write	This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bit set. In the receive direction, it uses the S-TAG DEI when enabled, else ignores it. The following comment is NOT relevant to OSA8.1.1, since this object is still supported by OSA8.1.1. The object has been deprecated. The respective configuration should be managed by following objects: cmEthernetAccPortRxDeiAction, cmEthernetAccPortTxDeiAction, cmEthernetAccPortRxDeiOuterTagType, cmEthernetAccPortTxDeiOuterTagType.
T/F cmEthernetAccPortIndependentShaperBW	1.3.6.1.4.1.2544.1.12.4.1.1.1.122	TruthValue	read-write	This object describes whether the shaper bw independent.
T/F cmEthernetAccPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.67.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
T/F cmEthernetAccPortJumboFramesEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.12	TruthValue	read-write	This object allows enabling/disabling jumbo frames support on the Ethernet Access Port. This object is only applicable for Ethernet Access Port on R3.1CM NTU Card.
T/F cmEthernetAccPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.1.1.111	TruthValue	read-only	Channel number of WDM tunable XFP setting.
T/F cmEthernetAccPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.1.1.45	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
T/F cmEthernetAccPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.41	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Access Port.
T/F cmEthernetAccPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.46	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
T/F cmEthernetAccPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.105	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
T/F cmEthernetAccPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.102	TruthValue	read-write	This object allows to Enable/Disable the Acc Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetAccPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.101	TruthValue	read-write	This object allows to Enable/Disable the Acc Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetAccPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.135	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
T/F cmEthernetAccPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.137	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
T/F cmEthernetAccPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.114	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Access Port.
T/F cmEthernetAccPortN2APopPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.86	TruthValue	read-write	This object allows to specify whether cmEthernetAccPortPortVlanId value will be POPed in the Network to Access direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetAccPortN2aSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.116	TruthValue	read-write	This object allows to Enable/Disable the Swapping of Priority Vlan Id in the N2A direction.
T/F cmEthernetAccPortN2AVlanTrunkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.84	TruthValue	read-write	This object allows to enable or disable the VLAN trunking on Ethernet Access port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of the access port. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetAccPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.74	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Access Port.
T/F cmEthernetAccPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.53	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port supports interpreting Link Events.
T/F cmEthernetAccPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.1.1.54	TruthValue	read-write	This object allows specification of whether the Ethernet Access Port is capable of OAM remote loopback mode.
T/F cmEthernetAccPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.55	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetAccPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.52	TruthValue	read-only	This object allows specification of whether the Ethernet Access Port supports sending variable response OAMPDUs.
T/F cmEthernetAccPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.60	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
T/F cmEthernetAccPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.1.1.61	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetAccPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.62	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetAccPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.59	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
T/F cmEthernetAccPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.1.1.130	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Access Port.
T/F cmEthernetAccPortPersistentLoopbackControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.134	TruthValue	read-write	This object allows enabling/disabling of Persistent Loopback Control. The loopback configuration parameters do not survive restart as typically maintenance actions are not persist. Setting this attribute to true shall persist the loopback configuration parameters. When it is set to false the loopback configuration parameters shall not survive a restart.
T/F cmEthernetAccPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.91	TruthValue	read-write	This object allows to specify whether the Ethernet Access Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetAccPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
T/F cmEthernetAccPortRxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.80	TruthValue	read-write	This object allows to enable/disable the RX PAUSE on the Access Port. This object is not applicable for FSP150CM NTU Card. On NTU Card cmEthernetAccPortRxPauseDisposition object should be used to provision RxPause disposition.
T/F cmEthernetAccPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.76	TruthValue	read-write	This object allows to manage the Access Port Shaping. When enabled, values in cmEthernetAccPortShapedSpeedLo and cmEthernetAccPortShapedSpeedHi are applicable.
T/F cmEthernetAccPortSilentStartControl	1.3.6.1.4.1.2544.1.12.4.1.1.1.128	TruthValue	read-write	Allows enabling/disabling of silent start.
T/F cmEthernetAccPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.90	TruthValue	read-write	This object allows to specify whether the Ethernet Access Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
T/F cmEthernetAccPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.1.1.68	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet Access port.
T/F cmEthernetNetPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.80	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
T/F cmEthernetNetPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.19.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
T/F cmEthernetNetPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.7.1.88	TruthValue	read-write	This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bit set. In the receive direction, it uses the S-TAG DEI when enabled, else ignores it. The following comment is NOT relevant to OSA8.1.1, since this object is still supported by OSA8.1.1. The object has been deprecated. The respective configuration should be managed by following objects: cmEthernetNetPortRxDeiAction, cmEthernetNetPortTxDeiAction, cmEthernetNetPortRxDeiOuterTagType, cmEthernetNetPortTxDeiOuterTagType.
T/F cmEthernetNetPortIndependentShaperBW	1.3.6.1.4.1.2544.1.12.4.1.7.1.111	TruthValue	read-write	This object describes the shaper BW whether independent.
T/F cmEthernetNetPortInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.56.1.3	TruthValue	read-write	This object allows to insert AIS out from TDM network port when it is in maintenance state.
T/F cmEthernetNetPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.68.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
T/F cmEthernetNetPortJumboFramesEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.12	TruthValue	read-write	This object allows enabling/disabling jumbo frames support on the Ethernet Network Port. This object is only applicable for Ethernet Network Port on R3.1CM NTU Card.
T/F cmEthernetNetPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.7.1.103	TruthValue	read-only	Channel number of WDM tunable XFP setting.
T/F cmEthernetNetPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.7.1.45	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
T/F cmEthernetNetPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.41	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Network Port.
T/F cmEthernetNetPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.46	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
T/F cmEthernetNetPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.97	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
T/F cmEthernetNetPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.94	TruthValue	read-write	This object allows to Enable/Disable the Net Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetNetPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.93	TruthValue	read-write	This object allows to Enable/Disable the Net Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetNetPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.130	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
T/F cmEthernetNetPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.132	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
T/F cmEthernetNetPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.106	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Network Port.
T/F cmEthernetNetPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.72	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Network Port.
T/F cmEthernetNetPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.53	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port supports interpreting Link Events.
T/F cmEthernetNetPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.7.1.54	TruthValue	read-write	This object allows specification of whether the Ethernet Network Port is capable of OAM remote loopback mode.
T/F cmEthernetNetPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.55	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetNetPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.52	TruthValue	read-only	This object allows specification of whether the Ethernet Network Port supports sending variable response OAMPDUs.
T/F cmEthernetNetPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.60	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
T/F cmEthernetNetPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.7.1.61	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetNetPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.62	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetNetPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.59	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
T/F cmEthernetNetPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.7.1.125	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Network Port.
T/F cmEthernetNetPortPersistentLoopbackControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.129	TruthValue	read-write	This object allows enabling/disabling of Persistent Loopback Control. The loopback configuration parameters do not survive restart as typically maintenance actions are not persist. Setting this attribute to true shall persist the loopback configuration parameters. When it is set to false the loopback configuration parameters shall not survive a restart.
T/F cmEthernetNetPortPppoeInnerVlanControl	1.3.6.1.4.1.2544.1.12.4.1.103.1.5	TruthValue	read-write	This object specify inner vlan whether enabled.
T/F cmEthernetNetPortPppoeOuterVlanControl	1.3.6.1.4.1.2544.1.12.4.1.103.1.1	TruthValue	read-write	This object specify outer vlan whether enabled.
T/F cmEthernetNetPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.82	TruthValue	read-write	This object allows to specify whether the Ethernet Network Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetNetPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
T/F cmEthernetNetPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.74	TruthValue	read-write	This object allows to manage the Network Port Shaping. When enabled, values in cmEthernetNetPortShapedSpeedLo and cmEthernetNetPortShapedSpeedHi are applicable.
T/F cmEthernetNetPortSilentStartControl	1.3.6.1.4.1.2544.1.12.4.1.7.1.123	TruthValue	read-write	Allows enabling/disabling of silent start.
T/F cmEthernetNetPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.81	TruthValue	read-write	This object allows to specify whether the Ethernet Network Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
T/F cmEthernetNetPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.7.1.66	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products.
T/F cmEthernetNetPortXdslBitSwapEnabled	1.3.6.1.4.1.2544.1.12.4.1.104.1.3	TruthValue	read-write	Enable/disable bitswap.
T/F cmEthernetNetPortXdslConnControl	1.3.6.1.4.1.2544.1.12.4.1.104.1.1	TruthValue	read-write	This object enable/disable xdsl link.
T/F cmEthernetNetPortXdslGvectorEnabled	1.3.6.1.4.1.2544.1.12.4.1.104.1.4	TruthValue	read-write	Enable/disable G.vector.
T/F cmEthernetTrafficPortAutoDiagEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.105	TruthValue	read-write	This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
T/F cmEthernetTrafficPortBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.6	TruthValue	read-write	Whether broadcast packets need be limited per port.
T/F cmEthernetTrafficPortClbEnabled	1.3.6.1.4.1.2544.1.12.4.1.65.1.2	TruthValue	read-write	This enables specification of Cable Length Benchmark entry.
T/F cmEthernetTrafficPortCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.9	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
T/F cmEthernetTrafficPortDeiEnable	1.3.6.1.4.1.2544.1.12.4.1.27.1.91	TruthValue	read-write	This object describes whether use DEI bit in S-tag to recognize Drop Eligibility Parameter for ingress S-tag packets or Set DEI bit for egress S-tag Packets. This object is still supported by OSA8.1.1
T/F cmEthernetTrafficPortEgressPopPriorityVidEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.68	TruthValue	read-write	This object defines the egress PopPriorityVid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped back to VID=0. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortEgressSwapPriorityVIDEnabled
T/F cmEthernetTrafficPortEgressPopPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.67	TruthValue	read-write	This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be POPed in the egress direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortEgressSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.126	TruthValue	read-write	This object defines the egress Swap Priority Vid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped back to VID=0.
T/F cmEthernetTrafficPortEgressVlanTrunkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.65	TruthValue	read-write	This object allows to enable or disable the VLAN trunking on Ethernet port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of the port. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortIngressPopPriorityVidEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.110	TruthValue	read-write	This object defines the Ingress PopPriorityVid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortIngressSwapPriorityVIDEnabled
T/F cmEthernetTrafficPortIngressPushPVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.66	TruthValue	read-write	This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be PUSHed on untagged frames or not in the ingress direction. This object is only applicable for connection-oriented, evpl service type.
T/F cmEthernetTrafficPortIngressSwapPriorityVIDEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.125	TruthValue	read-write	This object defines the Ingress Swap Priority Vid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID.
T/F cmEthernetTrafficPortJDSUControlFramesSnoopingEnabled	1.3.6.1.4.1.2544.1.12.4.1.94.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
T/F cmEthernetTrafficPortJdsuLoopbackEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.108	TruthValue	read-write	This object allows to enable or disable jdsu loopback on this port. Note: This object is deprecated.
T/F cmEthernetTrafficPortLaserIsTunable	1.3.6.1.4.1.2544.1.12.4.1.27.1.89	TruthValue	read-only	This object means this module whether tunnable.
T/F cmEthernetTrafficPortLinkLossFwdActive	1.3.6.1.4.1.2544.1.12.4.1.27.1.33	TruthValue	read-only	This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
T/F cmEthernetTrafficPortLinkLossFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.29	TruthValue	read-write	This object allows enabling/disabling link loss forwarding on the Ethernet Port.
T/F cmEthernetTrafficPortLinkLossFwdPartnerEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.34	TruthValue	read-only	This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
T/F cmEthernetTrafficPortLoopbackBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.121	TruthValue	read-write	This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames.
T/F cmEthernetTrafficPortLoopbackDestMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.118	TruthValue	read-write	This object allows to Enable/Disable the Traffic Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetTrafficPortLoopbackSourceMacControlEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.117	TruthValue	read-write	This object allows to Enable/Disable the Traffic Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
T/F cmEthernetTrafficPortLoopbackTestReflectorIPv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.148	TruthValue	read-write	Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface.
T/F cmEthernetTrafficPortLoopbackTestReflectorIPv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.27.1.150	TruthValue	read-write	Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface.
T/F cmEthernetTrafficPortLowLatencyQueuingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.123	TruthValue	read-write	This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Traffic Port.
T/F cmEthernetTrafficPortLpbkInnerVlanEnabled	1.3.6.1.4.1.2544.1.12.4.1.69.1.2	TruthValue	read-write	This object represent the inner vlan whether enabled.
T/F cmEthernetTrafficPortLpbkOuterVlanEnabled	1.3.6.1.4.1.2544.1.12.4.1.69.1.4	TruthValue	read-write	This object represent the outter vlan whether enabled.
T/F cmEthernetTrafficPortMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.52.1.3	TruthValue	read-write	Whether multicast packets need be limited on this port.
T/F cmEthernetTrafficPortOamEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.54	TruthValue	read-write	This object allows to manage the EFM OAM on Ethernet Traffic Port.
T/F cmEthernetTrafficPortOamLocalLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.42	TruthValue	read-only	This object allows specification of whether the Ethernet Port supports interpreting Link Events.
T/F cmEthernetTrafficPortOamLocalOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.27.1.43	TruthValue	read-write	This object allows specification of whether the Ethernet Port is capable of OAM remote loopback mode.
T/F cmEthernetTrafficPortOamLocalUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.44	TruthValue	read-only	This object allows specification of whether the Ethernet Port is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetTrafficPortOamLocalVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.41	TruthValue	read-only	This object allows specification of whether the Ethernet Port supports sending variable response OAMPDUs.
T/F cmEthernetTrafficPortOamRemoteLinkEventsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.49	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
T/F cmEthernetTrafficPortOamRemoteOamLoopbacksSupported	1.3.6.1.4.1.2544.1.12.4.1.27.1.50	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
T/F cmEthernetTrafficPortOamRemoteUnidirSupportEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.51	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
T/F cmEthernetTrafficPortOamRemoteVarRtrvsEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.48	TruthValue	read-only	This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
T/F cmEthernetTrafficPortOuterTagTpidOverride	1.3.6.1.4.1.2544.1.12.4.1.27.1.141	TruthValue	read-write	This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Traffic Port.
T/F cmEthernetTrafficPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.63.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
T/F cmEthernetTrafficPortQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.75	TruthValue	read-write	This object allows to specify whether the Ethernet Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
T/F cmEthernetTrafficPortRxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.57	TruthValue	read-write	This object defines the RxPause enable or disable of the port.
T/F cmEthernetTrafficPortShapingEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.60	TruthValue	read-write	This object allows to manage the Ethernet Port Shaping. When enabled, values in cmEthernetTrafficPortShapedSpeedLo and cmEthernetTrafficPortShapedSpeedHi are applicable.
T/F cmEthernetTrafficPortSyncEEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.74	TruthValue	read-write	This object allows to specify whether the Ethernet Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC.
T/F cmEthernetTrafficPortTxPauseEnabled	1.3.6.1.4.1.2544.1.12.4.1.27.1.58	TruthValue	read-write	This object allows enabling/disabling transmit pause frames on Ethernet port.
T/F cmFlowA2NBroadcastRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.59	TruthValue	read-write	Whether broadcast frames are limited per Flow.
T/F cmFlowA2NCombinedRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.62	TruthValue	read-write	Whether both multicast and broadcast frames are limited per Flow.
T/F cmFlowA2NMulticastRateLimitControl	1.3.6.1.4.1.2544.1.12.4.1.4.1.56	TruthValue	read-write	Whether multicast frames are limited per Flow.
T/F cmFlowAutoBandwidthConfigEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.48	TruthValue	read-create	This object is applicable for Flows on the PWE3 Ethernet Backplane Port. When set to TRUE bandwidth of this Flow will be automatically adjusted when PWE3 SATOPs are provisioned. The bandwidth will be adjusted based on the TDM entities of associated SATOPs. Flow on ports other than PWE3 Ethernet Backplane Port will always have this value set to FALSE and it is not configurable.
T/F cmFlowCTagMatchRxPrio	1.3.6.1.4.1.2544.1.12.4.1.4.1.33	TruthValue	read-create	This object is used to specify whether the C-TAG priority be used or ignored for traffic in the N2A direction. This is only applicable if cmFlowCTagControl is 'push'. This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowHCOSMgmtEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.25	TruthValue	read-create	This object allows management of Hierarchical COS on the Flow.
T/F cmFlowIndependentA2NShaperBW	1.3.6.1.4.1.2544.1.12.4.1.4.1.71	TruthValue	read-write	This object used to specify the flow related A2N shaper BW whether independent.
T/F cmFlowInnerTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.43	TruthValue	read-create	This object is used to specify whether the flow participates in inner-tag (second) priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N inner-tag priority to be specified based on incoming priority at Access Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should FALSE.
T/F cmFlowMultiCOS	1.3.6.1.4.1.2544.1.12.4.1.4.1.7	TruthValue	read-create	This object allows specification of multiple COS (Class of Service) Flow.
T/F cmFlowN2AOuterTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.44	TruthValue	read-create	This object is used to specify whether the flow participates in outer-tag priority swap in the A2N direction. The Priority Mapping Table cmNetPortPrioMapTable allows the N2A outer-tag priority to be specified based on incoming priority at Network Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowN2ARateLimitingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.10	TruthValue	read-create	This object allows management of the N2A rate limiting, independent of A2N rate limiting. When not enabled, N2A specification is the same as A2N. This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowN2NForwardingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.55	TruthValue	read-create	This object is used to specify whether n2n forwarding is enabled on particular Flow.
T/F cmFlowOuterTagPrioEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.37	TruthValue	read-create	This object is used to specify whether the flow participates in outer-tag priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N outer-tag priority to be specified based on incoming priority at Access Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowPointAutoBandwidthConfigEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.47	TruthValue	read-create	This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available port bandwidth multiplied by the value of the cmFlowPointAutoCIRPercentage object. For a Hierarchical-COS Flow Point, the cmFlowPointMaximumBWLo and cmFlowPointMaximumBWHi are set to the maximum port bandwidth; the cmFlowPointGuaranteedBWLo and cmFlowPointGuaranteedBWHi are set to the available port bandwidth multiplied by the value of the cmFlowPointAutoCIRPercentage object. The value of this object must be FALSE when cmFlowPointIngressMultiCOSEnabled is TRUE and cmFlowPointHierarchicalCOSEnabled is FALSE.
T/F cmFlowPointBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.29	TruthValue	read-write	Whether broadcast packets need be limited per FP.
T/F cmFlowPointColorMarkingSupported	1.3.6.1.4.1.2544.1.12.4.1.29.1.20	TruthValue	read-create	This object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed will be remarked according the meter result. If set to Disabled, the DEI bit is forced to 0.
T/F cmFlowPointDefaultMemberEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.25	TruthValue	read-write	defaultMemberEnabled with enabled means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.
T/F cmFlowPointEfEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.54	TruthValue	read-create	When enabled FlowPoint is configured to monitor elephant(large) flows. When disabled, elephant flow management is not supported on the FlowPoint.
T/F cmFlowPointEgressInnerTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.46	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmFlowPointEgressOuterTagPrioMapEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.19	TruthValue	read-create	This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled,it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.
T/F cmFlowPointFrameFwdEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.49	TruthValue	read-create	When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
T/F cmFlowPointHierarchicalCosEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.34	TruthValue	read-write	Enable or Disable Hierarchical COS shaping (flow shaping).
T/F cmFlowPointIngressMultiCOS	1.3.6.1.4.1.2544.1.12.4.1.29.1.7	TruthValue	read-create	This object allows specification of ingress multiple COS (Class of Service) FlowPoint.
T/F cmFlowPointIngressUntaggedFrameEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.12	TruthValue	read-create	This object allows to specify whether or not the flowpoint supports untagged frame.
T/F cmFlowPointMcastAndBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.42	TruthValue	read-write	Whether multicast packets and broadcast packets need be limited per FP.
T/F cmFlowPointMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.29.1.26	TruthValue	read-write	Whether multicast packets need be limited per FP.
T/F cmFlowPointUsePortPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.50	TruthValue	read-write	This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
T/F cmFlowPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.41	TruthValue	read-create	This object is applicable only when Port is in connection-oriented mode. This object is applicable to both epl and evpl mode flows. This object allows to enable/disable the policing function on the flow.
T/F cmFlowPreserveSTagProperties	1.3.6.1.4.1.2544.1.12.4.1.4.1.42	TruthValue	read-create	This object is applicable only when Port is in connection-oriented mode. This object is applicable to evpl mode Regular flows, when S-TAG control is specified as SWAPVID. When enabled, this attribute preserves the EtherType (0x88a8) and DEI (Drop Eligibility Indicator) bit in the incoming S-TAG (both from Access and Network Port perspective) into the outgoing S-TAG. When not enabled, the incoming tag is considered as a Q-TAG (0x8100) and both EtherType and CFI (Canonical Form Indicator) bits are over-written by the S-TAG Ethertype (0x88a8) and DEI bit. This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowSecureBlockingEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.68	TruthValue	read-write	This object can be used to enable/disable secure block.
T/F cmFlowSTagMatchRxPrio	1.3.6.1.4.1.2544.1.12.4.1.4.1.47	TruthValue	read-create	This object indicates whether the S-TAG priority is used or ignored for traffic in the N2A direction. This is only applicable if cmFlowSTagControl is 'push'. This object is not applicable for Tranparent Flow; the value should be FALSE.
T/F cmFlowUntaggedMemberEnabled	1.3.6.1.4.1.2544.1.12.4.1.4.1.20	TruthValue	read-create	This object is applicable only when Port is in connection-oriented evpl mode for a regular flow as well as default flow. This object allows to specify whether or not the flow supports untagged traffic.
T/F cmMPFlowLearningEnabled	1.3.6.1.4.1.2544.1.12.4.1.60.1.6	TruthValue	read-write	DISABLED: The forwarding function of the Flow does not dynamically learn MAC address to flowpoint mapping. ENABLED: The forwarding function of the Flow dynamically learns MAC address to flowpoint mapping based on ingress flowpoing and source MAC address.
T/F cmNetPortEncapPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.91.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming EncapPcp value.
T/F cmNetPortExpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.85.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming Exp value.
T/F cmNetPortExtBcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.4	TruthValue	read-write	Whether broadcast packets need be limited per port.
T/F cmNetPortExtCombinedRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.7	TruthValue	read-write	Whether multicast and broadcast packets need be limited per port.
T/F cmNetPortExtMcastRateLimitEnabled	1.3.6.1.4.1.2544.1.12.4.1.76.1.1	TruthValue	read-write	Whether multicast packets need be limited on this port.
T/F cmNetPortIpPrecDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.88.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming IpPrec value.
T/F cmNetPortPcpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.25.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming PCP value.
T/F cmOAMFlowPointIngressUntaggedFrameSupported	1.3.6.1.4.1.2544.1.12.4.1.30.1.9	TruthValue	read-create	This object allows to specify whether or not the OAMFlowPoint supports untagged frame.
T/F cmPrioMapV2ProfileCosMapControl	1.3.6.1.4.1.2544.1.12.4.1.70.1.8	TruthValue	read-write	This object is used to control whether has cmPrioMapV2PrioMappingCOSTable in profile.
T/F cmQosFlowPolicerColorMarkingFlag	1.3.6.1.4.1.2544.1.12.4.1.11.1.15	TruthValue	read-create	This object allows specification of Policer Color Marking Flag. The policer will set/clear the DEI (Drop Eligibility Indication) bit of the frame on an S-TAG if this flag is enabled. This object is not supported - setting any value will not have effect on the System.
T/F cmQosFlowPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.11.1.16	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
T/F cmQosFlowPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.11.1.26	TruthValue	read-write	This object describes whether the policing is enabled.
T/F cmQosPolicerProfileCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.39.1.10	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
T/F cmQosPolicerV2ColorMarkingEnabled	1.3.6.1.4.1.2544.1.12.4.1.41.1.5	TruthValue	read-only	This object indicates the colorMarking state of the QOS Policer.
T/F cmQosPolicerV2PolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.41.1.9	TruthValue	read-write	Whether enable or disable the functionality of policing for this COS.
T/F cmQosQueueProfileREDEnabled	1.3.6.1.4.1.2544.1.12.4.1.40.1.4	TruthValue	read-create	This object defines whether the WRED is enabled as congestion algorithm or not. If disabled, then the following RED parameters (cmQueueProfileWREDDp0MinTh, cmQueueProfileWREDDp0MaxTh and cmQueueProfileWREDDp0MaxProb) must not be specified.
T/F cmQosShaperV2LowLatencyControl	1.3.6.1.4.1.2544.1.12.4.1.42.1.18	TruthValue	read-write	This object specifies low latency control whether enabled.
T/F cmTrafficAclDstIpFilterEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.10	TruthValue	read-write	This object enable/disable Destination IPV4 or IPV6 address filter criteria.
T/F cmTrafficAclDstMacAddrEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.8	TruthValue	read-write	This object enables/disables destination MAC address of Acl entry.
T/F cmTrafficAclEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.4	TruthValue	read-write	This object enables/disables the Acl entity.
T/F cmTrafficAclIpQosTypeEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.27	TruthValue	read-write	This object enables/disables qos type of acl entry.
T/F cmTrafficAclProtocolTypeEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.33	TruthValue	read-write	This object enables/disables protocol type of Acl entry.
T/F cmTrafficAclSrcIpFilterEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.9	TruthValue	read-write	This object enable/disable Source IPV4 or IPV6 address filter criteria.
T/F cmTrafficAclSrcMacAddrEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.6	TruthValue	read-write	This object enables/disables source MAC address of Acl entry.
T/F cmTrafficAclTcpUdpDstPortEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.24	TruthValue	read-write	This object enables/disables TCP/UDP destination port of Acl entry.
T/F cmTrafficAclTcpUdpSrcPortEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.21	TruthValue	read-write	This object enables/disables TCP/UDP source port of Acl entry.
T/F cmTrafficAclVlanIdEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.29	TruthValue	read-write	This object enables/disables Vlan Id of Acl entry.
T/F cmTrafficAclVlanPriorityEnabled	1.3.6.1.4.1.2544.1.12.4.1.38.1.31	TruthValue	read-write	This object enables/disables Vlan Priority of Acl entry.
T/F e1t1InsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.50.1.12	TruthValue	read-write	This object allows to insert AIS out from E1/T1 when it is in maintenance state.
T/F e1t1PatternLpbkControl	1.3.6.1.4.1.2544.1.12.4.1.50.1.23	TruthValue	read-write	This object allows to enable or disable Pattern Loopback on a E1 port.
T/F e1t1RemoteLoopbackRequest	1.3.6.1.4.1.2544.1.12.4.1.50.1.11	TruthValue	read-write	This object allows to specify to repond the remote loopback request or not.
T/F e3t3CBitEnable	1.3.6.1.4.1.2544.1.12.4.1.51.1.13	TruthValue	read-write	The object provides whether C-Bit Parity is enabled/disabled.
T/F e3t3InsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.51.1.12	TruthValue	read-write	This object allows to insert AIS out from E3/T3 when it is in maintenance state.
T/F e3t3RemoteLoopbackRequest	1.3.6.1.4.1.2544.1.12.4.1.51.1.11	TruthValue	read-write	This object allows to specify to repond the remote loopback request or not.
T/F e3t3T3Channelized	1.3.6.1.4.1.2544.1.12.4.1.51.1.14	TruthValue	read-write	The object provides whether the T3 tunnel is channlized with T1.
T/F f3AclRuleActive	1.3.6.1.4.1.2544.1.12.4.1.99.1.51	TruthValue	read-write	The ACL Rule Active activates/deactivates ACL Rule.
T/F f3AclRuleCosOverrideControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.6	TruthValue	read-write	The ACL rule COS Override control.
T/F f3AclRuleDstIpv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.38	TruthValue	read-write	The ACL rule Destination IPv4 Adress control whether enabled.
T/F f3AclRuleDstIpv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.55	TruthValue	read-write	The ACL rule destination ipv6 Adress is control enabled.
T/F f3AclRuleDstMacAddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.11	TruthValue	read-write	The ACL rule dynamic Destination MAC address control.
T/F f3AclRuleDstPortControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.44	TruthValue	read-write	The ACL rule destination port whether enabled.
T/F f3AclRuleEtherTypeControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.28	TruthValue	read-write	The ACL rule outer vlan ether type control.
T/F f3AclRuleInnerVlanPcpControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.23	TruthValue	read-write	The ACL rule inner vlan PCP control.
T/F f3AclRuleInnerVlanVIDControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.17	TruthValue	read-write	The ACL rule inner VID control.
T/F f3AclRuleIpv4PriorityControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.30	TruthValue	read-write	The ACL rule IPv4 Priority control whether enabled.
T/F f3AclRuleIpV6FlowLabelControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.58	TruthValue	read-write	The ACL rule ipv6 Flow Label Control enables/disables Flow Label.
T/F f3AclRuleOuterVlanDeiControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.26	TruthValue	read-write	The ACL rule outer vlan DEI control.
T/F f3AclRuleOuterVlanPcpControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.20	TruthValue	read-write	The ACL rule outer vlan PCP control.
T/F f3AclRuleOuterVlanVIDControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.14	TruthValue	read-write	The ACL rule outer VID control.
T/F f3AclRulePriorityControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.60	TruthValue	read-write	The ACL rule Priority control whether enabled.
T/F f3AclRuleProtocolControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.33	TruthValue	read-write	The ACL rule protocol control whether enabled.
T/F f3AclRuleSrcIpv4AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.35	TruthValue	read-write	The ACL rule source IPv4 Adress control whether enabled.
T/F f3AclRuleSrcIpv6AddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.52	TruthValue	read-write	The ACL rule source ipv6 adress is control enabled.
T/F f3AclRuleSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.8	TruthValue	read-write	The ACL rule Source MAC address control.
T/F f3AclRuleSrcPortControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.41	TruthValue	read-write	The ACL rule source port whether enabled.
T/F f3AclRuleTcpFlagsControl	1.3.6.1.4.1.2544.1.12.4.1.99.1.47	TruthValue	read-write	The ACL rule outer vlan TCP flags control.
T/F f3EthernetTrafficPortExpDEDecDropEligible	1.3.6.1.4.1.2544.1.12.4.1.101.1.4	TruthValue	read-write	This object is the drop eligibility decoded from a incoming Exp value.
T/F f3FpQosPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.96.1.13	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
T/F f3FpQosPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.4.1.96.1.14	TruthValue	read-create	This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.
T/F f3GPSReceiverPortPPSGeneratedFlag	1.3.6.1.4.1.2544.1.12.4.1.57.1.13	TruthValue	read-only	This object indicates whether there are enough usable satellites to provide accurate PPS output.
T/F f3GPSReceiverPortSatellitesUsableFlag	1.3.6.1.4.1.2544.1.12.4.1.57.1.10	TruthValue	read-only	This object provides information on whether the satellites are usable. It is set to TRUE, when ephemeris and health data for at least one satellite is available.
T/F f3IrigOutputGroupExtensionDetection	1.3.6.1.4.1.2544.1.12.4.1.109.1.6	TruthValue	read-only	This object allows to manage the Control field of the IRIG output group.
T/F f3PolicerEnvelopeCouplingFlag	1.3.6.1.4.1.2544.1.12.4.1.82.1.2	TruthValue	read-write	This object allows specification of Policer Envelope Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level
T/F f3SatelliteInUse	1.3.6.1.4.1.2544.1.12.4.1.93.1.2	TruthValue	read-only	This object indicates whether the Satellite Entry been used by GNSS receiver. It is supported only on OSA542x devices.
T/F ocnStmInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.47.1.21	TruthValue	read-write	This object allows to insert AIS-L out from OCn/STM interface when it is in maintenance state.
T/F ocnStmQLModeEnabled	1.3.6.1.4.1.2544.1.12.4.1.47.1.28	TruthValue	read-write	This object allows to specify whether the OCn/STM interface can be enabled/disabled for QL Mode. This object is only applicable for Synchronous OCn/STM interface, when ocnStmQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
T/F stsVcPathInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.48.1.10	TruthValue	read-write	This object allows to insert AIS-P out from OCn Path when it is in maintenance state.
T/F vtVcPathInsertingAIS	1.3.6.1.4.1.2544.1.12.4.1.49.1.10	TruthValue	read-write	This object allows to insert AIS-P out from OCn VT1.5/VC12 when it is in maintenance state.
TxDeiAction (3)
TXD cmEthernetAccPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.1.1.107	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
TXD cmEthernetNetPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.7.1.99	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
TXD cmEthernetTrafficPortTxDeiAction	1.3.6.1.4.1.2544.1.12.4.1.27.1.112	TxDeiAction	read-write	This object allows to specify the Transmit DEI Action.
Unsigned32 (228)
U32 cmAccPortExtBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.6	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmAccPortExtBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.5	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmAccPortExtCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.9	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
U32 cmAccPortExtCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.8	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
U32 cmAccPortExtMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.75.1.3	Unsigned32	read-write	The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmAccPortExtMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.75.1.2	Unsigned32	read-write	The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmAccPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.12.1.12	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
U32 cmAccPortQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.12.1.10	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 cmAccPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 cmAccPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.6	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 cmAccPortQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.12.1.11	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 cmAccPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.8	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.15	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.
U32 cmAccPortQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.14	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.
U32 cmAccPortQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.12.1.17	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.12.1.16	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 cmAccPortQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.12.1.20	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 cmAccPortQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.19	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 cmAccPortQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.18	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 cmAccPortQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.12.1.23	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
U32 cmAccPortQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.22	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 cmAccPortQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.12.1.21	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
U32 cmEthernetAccPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.1.1.112	Unsigned32	read-only	Channel number of WDM tunable XFP setting.
U32 cmEthernetAccPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.1.1.131	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Access Port.
U32 cmEthernetAccPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.1.1.79	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Access Port. Setting this value to 0 will disable the Q-in-Q override on the Access Port.
U32 cmEthernetAccPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.1.1.78	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled.
U32 cmEthernetAccPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.1.1.77	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled.
U32 cmEthernetAccPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.1.1.127	Unsigned32	read-write	This object used to specify the wfq group eir high 32 bits value.
U32 cmEthernetAccPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.1.1.126	Unsigned32	read-write	This object used to specify the wfq group eir low 32 bits value.
U32 cmEthernetNetPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.7.1.104	Unsigned32	read-only	Channel number of WDM tunable XFP setting.
U32 cmEthernetNetPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.7.1.126	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Network Port.
U32 cmEthernetNetPortPppoeInnerVlanEtherType	1.3.6.1.4.1.2544.1.12.4.1.103.1.6	Unsigned32	read-write	This object specify inner vlan ether type value.
U32 cmEthernetNetPortPppoeLcpKeepAlivePeriod	1.3.6.1.4.1.2544.1.12.4.1.103.1.10	Unsigned32	read-write	The service name requested.
U32 cmEthernetNetPortPppoeLcpRetryThreshold	1.3.6.1.4.1.2544.1.12.4.1.103.1.11	Unsigned32	read-write	This object specify the lcp retry threshold.
U32 cmEthernetNetPortPppoeOuterVlanEtherType	1.3.6.1.4.1.2544.1.12.4.1.103.1.2	Unsigned32	read-write	This object specify outer vlan ether type value.
U32 cmEthernetNetPortPppoeSessionId	1.3.6.1.4.1.2544.1.12.4.1.103.1.14	Unsigned32	read-only	pppoe session id.
U32 cmEthernetNetPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.7.1.77	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Network Port. Setting this value to 0 will disable the Q-in-Q override on the Network Port.
U32 cmEthernetNetPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.7.1.76	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.
U32 cmEthernetNetPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.7.1.75	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.
U32 cmEthernetNetPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.7.1.122	Unsigned32	read-write	This object is used to specify the wfq group eir high 32 bits value.
U32 cmEthernetNetPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.7.1.121	Unsigned32	read-write	This object is used to specify the wfq group eir low 32 bits value.
U32 cmEthernetNetPortXdslActualLinkRateDownStream	1.3.6.1.4.1.2544.1.12.4.1.104.1.9	Unsigned32	read-only	Actual link rate downstream.
U32 cmEthernetNetPortXdslActualLinkRateUpStream	1.3.6.1.4.1.2544.1.12.4.1.104.1.8	Unsigned32	read-only	Actual link rate upstream.
U32 cmEthernetNetPortXdslDsAttainableRate	1.3.6.1.4.1.2544.1.12.4.1.104.1.20	Unsigned32	read-only	Attainable link rate downstream.
U32 cmEthernetNetPortXdslUsAttainableRate	1.3.6.1.4.1.2544.1.12.4.1.104.1.21	Unsigned32	read-only	attainable link rate upstream.
U32 cmEthernetTrafficPortBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.8	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmEthernetTrafficPortBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmEthernetTrafficPortBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.7	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmEthernetTrafficPortBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmEthernetTrafficPortCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.11	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
U32 cmEthernetTrafficPortCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.10	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
U32 cmEthernetTrafficPortLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.90	Unsigned32	read-only	This object describes this module's frequency, and the step is 1GHZ.
U32 cmEthernetTrafficPortMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.52.1.5	Unsigned32	read-write	The rate limiting for multicast packets per port When cmEthernetTrafficPortMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmEthernetTrafficPortMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.52.1.4	Unsigned32	read-write	The rate limiting for multicast packets per port When cmEthernetTrafficPortMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmEthernetTrafficPortOuterTagTpid	1.3.6.1.4.1.2544.1.12.4.1.27.1.142	Unsigned32	read-write	This object allows to specify the egress Outer Tag TPID on the Ethernet Traffic Port.
U32 cmEthernetTrafficPortQinQEtherType	1.3.6.1.4.1.2544.1.12.4.1.27.1.63	Unsigned32	read-write	This object allows to specify the Q-in-Q Ether Type on the Port.
U32 cmEthernetTrafficPortRemoteSfpLaserFrequency	1.3.6.1.4.1.2544.1.12.4.1.27.1.172	Unsigned32	read-only	This object provides frequency of the Remote SFP, the step is 1GHZ.
U32 cmEthernetTrafficPortSfpLaserWaveLengthPicometer	1.3.6.1.4.1.2544.1.12.4.1.27.1.81	Unsigned32	read-only	This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then cmEthernetTrafficPortSfpLaserWaveLength=1510 and cmTrafficPortSfpLaserWaveLengthPicometer=10.
U32 cmEthernetTrafficPortShapedSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.27.1.62	Unsigned32	read-write	This object allows to specify the higher 32 bits of the Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled.
U32 cmEthernetTrafficPortShapedSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.27.1.61	Unsigned32	read-write	This object allows to specify the lower 32 bits of the Ethernet Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled.
U32 cmEthernetTrafficPortSyncEServiceAvailableTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.134	Unsigned32	read-only	This object allows to manage service available time (seconds) for SYNCE.
U32 cmEthernetTrafficPortSyncEServiceUnavailableTime	1.3.6.1.4.1.2544.1.12.4.1.27.1.135	Unsigned32	read-only	This object allows to manage service unavailable time (seconds) for SYNCE.
U32 cmEthernetTrafficPortWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.27.1.140	Unsigned32	read-write	This object is used to specify the wfq group eir high 32 bits value.
U32 cmEthernetTrafficPortWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.27.1.139	Unsigned32	read-write	This object is used to specify the wfq group eir low 32 bits value.
U32 cmFlowA2NBroadcastRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.61	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
U32 cmFlowA2NBroadcastRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.60	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
U32 cmFlowA2NCIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.8	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the lower 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 CIR.
U32 cmFlowA2NCIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.21	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. This value represents the upper 32 bits of CIR (lower is provided in cmFlowA2NCIR). For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 CIR.
U32 cmFlowA2NCombinedRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.64	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
U32 cmFlowA2NCombinedRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.63	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
U32 cmFlowA2NEIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the lower 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 EIR.
U32 cmFlowA2NEIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.22	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 EIR.
U32 cmFlowA2NMulticastRateLimitHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.58	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits.
U32 cmFlowA2NMulticastRateLimitLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.57	Unsigned32	read-write	The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits.
U32 cmFlowGuaranteedA2NBandwidthHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.27	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of guaranteed bandwidth (upper 32 bits) of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 guaranteed bandwidth.
U32 cmFlowGuaranteedA2NBandwidthLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.26	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of guaranteed bandwidth (lower 32 bits) of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 guaranteed bandwidth.
U32 cmFlowMaximumA2NBandwidthHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.29	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of maximum bandwidth (upper 32 bits) of a flow. This is the peak limit of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 maximum bandwidth.
U32 cmFlowMaximumA2NBandwidthLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.28	Unsigned32	read-write	This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of maximum bandwidth (lower 32 bits) of a flow. This is the peak limit of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 maximum bandwidth.
U32 cmFlowN2ACIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.11	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 CIR.
U32 cmFlowN2ACIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.23	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. This value represents the upper 32 bits of CIR (lower is provided in cmFlowN2ACIR). For a Multi COS flow, this value is settable only at creation time. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 CIR.
U32 cmFlowN2AEIR	1.3.6.1.4.1.2544.1.12.4.1.4.1.12	Unsigned32	read-create	This object represents the Excess Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 EIR.
U32 cmFlowN2AEIRHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.24	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) on an Flow in the Network to Access (N2A) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 EIR.
U32 cmFlowPointBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.31	Unsigned32	read-write	The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmFlowPointBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.30	Unsigned32	read-write	The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmFlowPointEfRateThresholdHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.57	Unsigned32	read-write	This object specifies the threshold for the rate to declare a flow as an Elephant Flow. If cmFlowPointEfEnabled is enabled and this is set to 0, it is same as cmFlowPointEfEnabled control being disabled. This object only represents higher-order 32 bits.
U32 cmFlowPointEfRateThresholdLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.56	Unsigned32	read-write	This object specifies the threshold for the rate to declare a flow as an Elephant Flow. If cmFlowPointEfEnabled is enabled and this is set to 0, it is same as cmFlowPointEfEnabled control being disabled. This object only represents lower-order 32 bits.
U32 cmFlowPointGuaranteedBWHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.40	Unsigned32	read-write	This attribute description the flow point guaranteed bandwidth. This objects only represents high 32 bits.
U32 cmFlowPointGuaranteedBWLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.39	Unsigned32	read-write	This attribute description the flow point guaranteed bandwidth. This objects only represents low 32 bits.
U32 cmFlowPointMaximumBWHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.38	Unsigned32	read-write	This attribute description the flow point maximum bandwidth. This objects only represents high 32 bits.
U32 cmFlowPointMaximumBWLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.37	Unsigned32	read-write	This attribute description the flow point maximum bandwidth. This objects only represents low 32 bits.
U32 cmFlowPointMcastAndBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.44	Unsigned32	read-write	The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmFlowPointMcastAndBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.43	Unsigned32	read-write	The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmFlowPointMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.28	Unsigned32	read-write	The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmFlowPointMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.27	Unsigned32	read-write	The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmFlowPointWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.29.1.63	Unsigned32	read-write	This object is used to specify wfq group EIR high 32 bits value.
U32 cmFlowPointWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.29.1.62	Unsigned32	read-write	This object is used to specify wfq group EIR low 32 bits value.
U32 cmFlowWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.4.1.4.1.75	Unsigned32	read-write	This object used to specify the flow related wfq group EIR high 32 bits value.
U32 cmFlowWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.4.1.4.1.74	Unsigned32	read-write	This object used to specify the flow related wfq group EIR low 32 bits value.
U32 cmNetPortExtBcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.6	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmNetPortExtBcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.5	Unsigned32	read-write	The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmNetPortExtCombinedRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.9	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits.
U32 cmNetPortExtCombinedRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.8	Unsigned32	read-write	The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits.
U32 cmNetPortExtMcastRateLimitSpeedHi	1.3.6.1.4.1.2544.1.12.4.1.76.1.3	Unsigned32	read-write	The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.
U32 cmNetPortExtMcastRateLimitSpeedLo	1.3.6.1.4.1.2544.1.12.4.1.76.1.2	Unsigned32	read-write	The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.
U32 cmPrioMapV2ProfileDefaultCos	1.3.6.1.4.1.2544.1.12.4.1.70.1.9	Unsigned32	read-write	This object is used to specify the Default COS to be used when the Ingress Priority Mapping function does not match.
U32 cmPrioMapV2ProfileEgressCos	1.3.6.1.4.1.2544.1.12.4.1.70.1.10	Unsigned32	read-write	This object is used to specify the Default COS to be used when the Egress Priority Mapping function does not match.
U32 cmQosFlowPolicerCIRHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.8	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR.
U32 cmQosFlowPolicerCIRLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.7	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR.
U32 cmQosFlowPolicerCIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.20	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits.
U32 cmQosFlowPolicerCIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.21	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.
U32 cmQosFlowPolicerEIRHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.10	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR.
U32 cmQosFlowPolicerEIRLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.9	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR.
U32 cmQosFlowPolicerEIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.11.1.22	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits.
U32 cmQosFlowPolicerEIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.11.1.23	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits.
U32 cmQosPolicerProfileCIRHi	1.3.6.1.4.1.2544.1.12.4.1.39.1.4	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the upper 32 bits of the CIR.
U32 cmQosPolicerProfileCIRLo	1.3.6.1.4.1.2544.1.12.4.1.39.1.3	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the lower 32 bits of the CIR.
U32 cmQosPolicerProfileEIRHi	1.3.6.1.4.1.2544.1.12.4.1.39.1.6	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the upper 32 bits of the EIR.
U32 cmQosPolicerProfileEIRLo	1.3.6.1.4.1.2544.1.12.4.1.39.1.5	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the lower 32 bits of the EIR.
U32 cmQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.6.1.11	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
U32 cmQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.6.1.8	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 cmQosShaperCIR	1.3.6.1.4.1.2544.1.12.4.1.6.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 cmQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.15	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 cmQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.6.1.10	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 cmQosShaperEIR	1.3.6.1.4.1.2544.1.12.4.1.6.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Lower 32 bits) of a Shaper.
U32 cmQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.16	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.18	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) on the Shaper.
U32 cmQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.6.1.17	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits) of a Shaper.
U32 cmQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.6.1.20	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 cmQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.6.1.19	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Lower 32 bits) of a Shaper.
U32 cmQosShaperV2AdditionalCIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.14	Unsigned32	read-write	This object specifies the Higher 32 bits of additional CIR.
U32 cmQosShaperV2AdditionalCIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.13	Unsigned32	read-write	This object specifies the Lower 32 bits of additional CIR.
U32 cmQosShaperV2CIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.7	Unsigned32	read-write	This object specifies the Higher 32 bits of CIR.
U32 cmQosShaperV2CIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.6	Unsigned32	read-write	This object specifies the Lower 32 bits of CIR.
U32 cmQosShaperV2EIRHi	1.3.6.1.4.1.2544.1.12.4.1.42.1.9	Unsigned32	read-write	This object specifies the Higher 32 bits of EIR.
U32 cmQosShaperV2EIRLo	1.3.6.1.4.1.2544.1.12.4.1.42.1.8	Unsigned32	read-write	This object specifies the Lower 32 bits of EIR.
U32 cmQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.6.1.23	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 cmQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.22	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 cmQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.21	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 cmQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.6.1.26	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
U32 cmQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.25	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 cmQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.6.1.24	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
U32 cmTrafficPortQosShaperAdditionalCIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.15	Unsigned32	read-create	This object specifies the Higher 32 bits of additional CIR.
U32 cmTrafficPortQosShaperAdditionalCIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.14	Unsigned32	read-create	This object specifies the Lower 32 bits of additional CIR.
U32 cmTrafficPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.8	Unsigned32	read-create	This object specifies the Higher 32 bits of CIR.
U32 cmTrafficPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.7	Unsigned32	read-create	This object specifies the Lower 32 bits of CIR.
U32 cmTrafficPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.43.1.10	Unsigned32	read-create	This object specifies the Higher 32 bits of EIR.
U32 cmTrafficPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.43.1.9	Unsigned32	read-create	This object specifies the Lower 32 bits of EIR.
U32 e1t1Index	1.3.6.1.4.1.2544.1.12.4.1.50.1.2	Unsigned32	not-accessible	Index value used to uniquely identify this E1/T1 interface, within the parent container specified by e1t1ParentIfIndex.
U32 e3t3Index	1.3.6.1.4.1.2544.1.12.4.1.51.1.2	Unsigned32	not-accessible	This object is his index.
U32 f3AclRuleOuterVlanDei	1.3.6.1.4.1.2544.1.12.4.1.99.1.27	Unsigned32	read-write	The ACL rule outer vlan DEI.
U32 f3FpQosPolicerCIRHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.
U32 f3FpQosPolicerCIRLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.
U32 f3FpQosPolicerCIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.17	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits.
U32 f3FpQosPolicerCIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.18	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.
U32 f3FpQosPolicerEIRHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
U32 f3FpQosPolicerEIRLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.
U32 f3FpQosPolicerEIRMaxHi	1.3.6.1.4.1.2544.1.12.4.1.96.1.19	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits.
U32 f3FpQosPolicerEIRMaxLo	1.3.6.1.4.1.2544.1.12.4.1.96.1.20	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits.
U32 f3FpQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.95.1.11	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
U32 f3FpQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.95.1.9	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of a Shaper.
U32 f3FpQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.95.1.6	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.
U32 f3FpQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.95.1.5	Unsigned32	read-create	This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.
U32 f3FpQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.95.1.10	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of a Shaper.
U32 f3FpQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.95.1.8	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3FpQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.95.1.7	Unsigned32	read-create	This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.
U32 f3GPSReceiverPortAntennaCableLength	1.3.6.1.4.1.2544.1.12.4.1.57.1.8	Unsigned32	read-write	This object allows for configuration of the GPS Antenna cable length in meters. This object is deprecated and replaced by f3GPSReceiverPortAntennaDelayValue.
U32 f3GPSReceiverPortCNOMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.21	Unsigned32	read-write	This object configures the C/No mask in dB-Hz units, used by the GNSS Receiver Port.
U32 f3GPSReceiverPortCoordinateAltitude	1.3.6.1.4.1.2544.1.12.4.1.57.1.25	Unsigned32	read-only	This object provides the GNSS Receiver Port coordinate altitude in meters.
U32 f3GPSReceiverPortElevationMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.22	Unsigned32	read-write	This object configures the elevation mask in degrees, used by the GNSS Receiver Port.
U32 f3GPSReceiverPortFailureSuspendTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.48	Unsigned32	read-write	This object represents the Failure Suspend Time for the GNSS receiver.
U32 f3GPSReceiverPortHDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.46	Unsigned32	read-only	This object provides the dimensionless HDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet or the receiver is in navigation mode. The value is expressed in hundredth of the HDOP definition. For instance, a value of 153 means that HDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the minimum range value 0.
U32 f3GPSReceiverPortHorizontalAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.43	Unsigned32	read-only	This object represents the horizontal accuracy (in millimeters) of the position fix determined by the GNSS receiver.
U32 f3GPSReceiverPortNumTrackingSatellites	1.3.6.1.4.1.2544.1.12.4.1.57.1.11	Unsigned32	read-only	This object provides information on the number of tracking satellites.
U32 f3GPSReceiverPortPDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.31	Unsigned32	read-only	This object provides the dimensionless PDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet. The value is expressed in hundredth of the PDOP definition. For instance, a value of 153 means that PDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the maximum range value 4095.
U32 f3GPSReceiverPortPDOPMask	1.3.6.1.4.1.2544.1.12.4.1.57.1.27	Unsigned32	read-write	This object configures PDOP Mask used by the GNSS Receiver. The mask value is expressed in hundredth of the PDOP definition value and it is rounded to the nearest multiple of hundreds. For instance, a value of 200 means that GNSS Receiver stops collecting data when f3GPSReceiverPortPDOP value exceeds 200.
U32 f3GPSReceiverPortSatMin1Threshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.29	Unsigned32	read-write	This object configures the first threshold for the minimum of satellites used by the GNSS Receiver. SatMin1 must be stricly greater than SatMin2.
U32 f3GPSReceiverPortSatMin2Threshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.30	Unsigned32	read-write	This object configures the second threshold for the minimum of satellites used by the GNSS Receiver. SatMin1 must be stricly greater than SatMin2.
U32 f3GPSReceiverPortSelfSurveyPeriod	1.3.6.1.4.1.2544.1.12.4.1.57.1.28	Unsigned32	read-write	This object configures the Self Survey Period used by the GNSS Receiver.
U32 f3GPSReceiverPortSelfSurveyPositionAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.42	Unsigned32	read-write	This object configures the Self Survey Position accuracy threshold (in millimeters) used by the GNSS Receiver.
U32 f3GPSReceiverPortSelfSurveyProgress	1.3.6.1.4.1.2544.1.12.4.1.57.1.12	Unsigned32	read-only	This object provides information on the percentage of fixes collected so far.
U32 f3GPSReceiverPortServiceAvailableTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.38	Unsigned32	read-only	This object allows to manage service available time (seconds) for GNSS.
U32 f3GPSReceiverPortServiceUnavailableTime	1.3.6.1.4.1.2544.1.12.4.1.57.1.39	Unsigned32	read-only	This object allows to manage service unavailable time (seconds) for GNSS.
U32 f3GPSReceiverPortSpoofingLocationDifference	1.3.6.1.4.1.2544.1.12.4.1.57.1.52	Unsigned32	read-only	This object provides the calculated Location difference (in meters) based on position information provided by default and secondary GNSS receivers in 5405.
U32 f3GPSReceiverPortSpoofingLocationThreshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.51	Unsigned32	read-write	This object defines the threshold (in meters) for generating Location spoofing alarm in 5405.
U32 f3GPSReceiverPortSpoofingPpsDifference	1.3.6.1.4.1.2544.1.12.4.1.57.1.50	Unsigned32	read-only	This object provides the calculated PPS difference (in nanoseconds ) provided by default and secondary GNSS receivers in 5405.
U32 f3GPSReceiverPortSpoofingPpsThreshold	1.3.6.1.4.1.2544.1.12.4.1.57.1.49	Unsigned32	read-write	This object defines the threshold (in nanoseconds ) for generating PPS spoofing alarm in 5405.
U32 f3GPSReceiverPortTDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.45	Unsigned32	read-only	This object provides the dimensionless TDOP value calculated by the GNSS Receiver. The value is expressed in hundredth of the TDOP definition. For instance, a value of 153 means that TDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver, the value is shown with the minimum range value 0.
U32 f3GPSReceiverPortVDOP	1.3.6.1.4.1.2544.1.12.4.1.57.1.47	Unsigned32	read-only	This object provides the dimensionless VDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet or the receiver is in navigation mode. The value is expressed in hundredth of the VDOP definition. For instance, a value of 153 means that VDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the minimum range value 0.
U32 f3GPSReceiverPortVerticalAccuracy	1.3.6.1.4.1.2544.1.12.4.1.57.1.44	Unsigned32	read-only	This object represents the vertical accuracy (in millimeters) of the position fix determined by the GNSS receiver.
U32 f3NetPortQosShaperBufferSize	1.3.6.1.4.1.2544.1.12.4.1.45.1.12	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
U32 f3NetPortQosShaperCBS	1.3.6.1.4.1.2544.1.12.4.1.45.1.10	Unsigned32	read-create	This object represents the Commited Burst Size (CBS) of the Shaper.
U32 f3NetPortQosShaperCIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.7	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 f3NetPortQosShaperCIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.6	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 f3NetPortQosShaperEBS	1.3.6.1.4.1.2544.1.12.4.1.45.1.11	Unsigned32	read-create	This object represents the Excess Burst Size (EBS) of the Shaper.
U32 f3NetPortQosShaperEIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.9	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperEIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.8	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperSoamCIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.15	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.
U32 f3NetPortQosShaperSoamCIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.14	Unsigned32	read-create	This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.
U32 f3NetPortQosShaperSoamEIRHi	1.3.6.1.4.1.2544.1.12.4.1.45.1.17	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperSoamEIRLo	1.3.6.1.4.1.2544.1.12.4.1.45.1.16	Unsigned32	read-create	This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.
U32 f3NetPortQosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.4.1.45.1.20	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 f3NetPortQosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.19	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 f3NetPortQosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.18	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 f3NetPortQosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.4.1.45.1.23	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
U32 f3NetPortQosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.22	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 f3NetPortQosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.4.1.45.1.21	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
U32 f3PulsePerSecondPortAssumedClockClass	1.3.6.1.4.1.2544.1.12.4.1.53.1.22	Unsigned32	read-write	This object allows specification of the Assumed Clock Class for an input PPS port. It is only an indication and cannot be set for an output PPS Port.
U32 f3PulsePerSecondPortClockAccuracy	1.3.6.1.4.1.2544.1.12.4.1.53.1.14	Unsigned32	read-only	This object specify PPS port clock accuracy.
U32 f3PulsePerSecondPortClockClass	1.3.6.1.4.1.2544.1.12.4.1.53.1.13	Unsigned32	read-only	This object specify PPS port clock class.
U32 f3PulsePerSecondPortOutputDelay	1.3.6.1.4.1.2544.1.12.4.1.53.1.17	Unsigned32	read-write	This object allows specification of the PPS Output Delay in nanoseconds. The valid values are 0 to 999999999 in 10 nanoseconds steps. Values which are not multiple of 10 will be automatically rounded up to the next multiple of 10.
U32 f3PulsePerSecondPortWidth	1.3.6.1.4.1.2544.1.12.4.1.53.1.18	Unsigned32	read-write	This object allows specification of the Width of the PPS signal on the PPS Port. The valid values are 0 to 250000 in 1 microsecond unit.
U32 f3SatelliteAzimuth	1.3.6.1.4.1.2544.1.12.4.1.93.1.7	Unsigned32	read-only	This object indicates the Satellite Entry Azimuth Angle in degrees.
U32 f3SatelliteCNO	1.3.6.1.4.1.2544.1.12.4.1.93.1.5	Unsigned32	read-only	This object indicates the Satellite Entry Signal Level (Carrier-to-Noise power ratio) in dB-Hz units.
U32 f3SatelliteElevation	1.3.6.1.4.1.2544.1.12.4.1.93.1.8	Unsigned32	read-only	This object indicates the Satellite Entry Elevation Angle in degrees.
U32 f3SatelliteIndex	1.3.6.1.4.1.2544.1.12.4.1.93.1.1	Unsigned32	not-accessible	An integer index value used to uniquely identify this Satellite Entry in the f3SatelliteTable.
U32 f3SatelliteSV	1.3.6.1.4.1.2544.1.12.4.1.93.1.3	Unsigned32	read-only	This object indicates the Satellite Entry SV PRN number.
U32 f3TimeOfDayPortAssumedClockClass	1.3.6.1.4.1.2544.1.12.4.1.55.1.15	Unsigned32	read-write	This object allows specification of the Assumed Clock Class for an input TOD port. It is only an indication and cannot be set for an output TOD Port.
U32 gps10MHzPortClockAccuracy	1.3.6.1.4.1.2544.1.12.4.1.18.1.12	Unsigned32	read-only	This object specify GPS port clock accuracy.
U32 gps10MHzPortClockClass	1.3.6.1.4.1.2544.1.12.4.1.18.1.11	Unsigned32	read-only	This object specify GPS port clock class.
U32 ocnStmSfpLaserWaveLengthPicometer	1.3.6.1.4.1.2544.1.12.4.1.47.1.14	Unsigned32	read-only	This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then ocnStmSfpLaserWaveLength=1510 and ocnStmSfpLaserWaveLengthPicometer=10.
U32 pethPsePortExtPowerConsumption	1.3.6.1.4.1.2544.1.12.4.1.58.1.4	Unsigned32	read-only	This object means the power consumption of each port in mWatts.
U32 stsVcPathExpectedSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.19	Unsigned32	read-write	This object provides the expected C2 on the OCn Path.
U32 stsVcPathIndex	1.3.6.1.4.1.2544.1.12.4.1.48.1.2	Unsigned32	not-accessible	This object is his index.
U32 stsVcPathRxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.17	Unsigned32	read-only	This object provides the recevied C2 on the OCn Path.
U32 stsVcPathTxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.48.1.18	Unsigned32	read-write	This object provides the transmit C2 on the OCn Path.
U32 vtVcPathExpectedSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.19	Unsigned32	read-write	This object provides the expected V5 byte(b5-b7) on the OCn VT1.5/VC12.
U32 vtVcPathIndex	1.3.6.1.4.1.2544.1.12.4.1.49.1.2	Unsigned32	not-accessible	This object represents the unique number of the Path within the parent container represented by vtvcPathParentIfIndex.
U32 vtVcPathRxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.17	Unsigned32	read-only	This object provides the recevied V5 byte(b5-b7) on the OCn VT1.5/VC12.
U32 vtVcPathTxSignalLabel	1.3.6.1.4.1.2544.1.12.4.1.49.1.18	Unsigned32	read-write	This object provides the transmit V5 byte(b5-b7) on the OCn VT1.5/VC12.
UsbDCNMobileNetworkType (1)
USB f3UsbDCNPortMobileNetworkType	1.3.6.1.4.1.2544.1.12.4.1.46.1.37	UsbDCNMobileNetworkType	read-only	This object describe the mobile network type.
UsbOperationalMode (1)
USB f3Usb3GDCNMuxOperationalMode	1.3.6.1.4.1.2544.1.12.4.1.46.1.38	UsbOperationalMode	read-write	This object describe the USB operatioan mode.
VariablePointer (48)
NUM cmAccPortExtRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.75.1.10	VariablePointer	read-write	This object allows to set priority map profile.
NUM cmElineFlowFP1	1.3.6.1.4.1.2544.1.12.4.1.28.1.6	VariablePointer	read-create	This object allows SNMP management entities to provide a flowpoint with the Flow.
NUM cmElineFlowFP2	1.3.6.1.4.1.2544.1.12.4.1.28.1.7	VariablePointer	read-create	This object allows SNMP management entities to provide another flowpoint with the Flow.
NUM cmEncapFlowPointAssociatedFlowId	1.3.6.1.4.1.2544.1.12.4.1.113.1.3	VariablePointer	read-only	This object provides the association of an Flow with an Encap FlowPoint.
NUM cmEncapFlowPointRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.113.1.4	VariablePointer	read-create	This object specifies EoMpls Pw object OID.
NUM cmEncapFlowPointRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.113.1.13	VariablePointer	read-write	This object allows to set priority map profile.
NUM cmEthernetFlowPointAssociatedCpdProfile	1.3.6.1.4.1.2544.1.12.4.1.36.1.2	VariablePointer	read-write	An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.
NUM cmEthernetNetPortAssociatedTdmEntity	1.3.6.1.4.1.2544.1.12.4.1.56.1.2	VariablePointer	read-write	This object describes the associated working path of TDM network port.
NUM cmEthernetTrafficPortAssociatedCpdProfile	1.3.6.1.4.1.2544.1.12.4.1.35.1.2	VariablePointer	read-write	An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.
NUM cmEthernetTrafficPortBwResourcePort	1.3.6.1.4.1.2544.1.12.4.1.27.1.145	VariablePointer	read-write	Specifies a port whose bandwidth resources will be used. This object is applicable only for VM Server ports.
NUM cmEthernetTrafficPortRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.52.1.12	VariablePointer	read-write	This object allows to set priority map profile.
NUM cmEthernetTrafficPortRelatedVCG	1.3.6.1.4.1.2544.1.12.4.1.52.1.2	VariablePointer	read-only	This object describes the related VCG of the traffic port.
NUM cmFlowLoopAvoidanceObject	1.3.6.1.4.1.2544.1.12.4.1.4.1.53	VariablePointer	read-create	This object specifies the Loop Avoidance instance to which this Flow belongs. This object is appicable only for Transparent Flow and should point to the ERP instance for which this Flows carries pass-thru traffic. In case of Access Flow the value of this object should be zeroDotZero.
NUM cmFlowPointAssociatedAclProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.21	VariablePointer	read-create	This object provides the association of an Flow with an ACL profile.
NUM cmFlowPointAssociatedFlowId	1.3.6.1.4.1.2544.1.12.4.1.29.1.6	VariablePointer	read-only	This object provides the association of an Flow with an FlowPoint.
NUM cmFlowPointLoopAvoidance	1.3.6.1.4.1.2544.1.12.4.1.29.1.33	VariablePointer	read-write	EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
NUM cmFlowPointRefElpObject	1.3.6.1.4.1.2544.1.12.4.1.29.1.53	VariablePointer	read-create	This object specifies ELP object OID.
NUM cmFlowPointRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.29.1.51	VariablePointer	read-create	This object specifies EoMpls Pw object OID.
NUM cmFlowPointRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.29.1.41	VariablePointer	read-write	This object allows to set priority map profile.
NUM cmFlowPointSplitHorizonGroupOID	1.3.6.1.4.1.2544.1.12.4.1.29.1.32	VariablePointer	read-write	Specifies the Split-Horizon Group EID. If there is no SHG, the value is none.
NUM cmFlowPort1	1.3.6.1.4.1.2544.1.12.4.1.4.1.49	VariablePointer	read-create	This object specifies a physical or logical port on the Access side of the Flow. This can be Access Port, Access LAG or Access Split Horizion Group. In case of Tranparent Flow this object specifies port1 of the Flow which is Network-1.
NUM cmFlowPort2	1.3.6.1.4.1.2544.1.12.4.1.4.1.50	VariablePointer	read-create	This object specifies a physical or logical port on the Network side of the Flow. This can be Network Port, Network LAG, Network Split Horizion Group ERP or Protection Group. In case of Tranparent Flow this object specifies port2 of the Flow which is Network-2.
NUM cmFlowRefEoMplsPwObject	1.3.6.1.4.1.2544.1.12.4.1.4.1.66	VariablePointer	read-write	This object specifies EoMpls Pw object OID.
NUM cmFlowRefN2APrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.4.1.67	VariablePointer	read-write	This object used to specify the flow's N2A direction profile.
NUM cmFlowRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.4.1.65	VariablePointer	read-write	This object used to specify the flow's profile.
NUM cmMPFlowFwdTableSizeProfileID	1.3.6.1.4.1.2544.1.12.4.1.60.1.8	VariablePointer	read-write	Profile ID for Maximum number of MAC Table Entries for the flow
NUM cmMPFlowMemberFPIndex	1.3.6.1.4.1.2544.1.12.4.1.61.1.1	VariablePointer	not-accessible	This object describes the relate Flow point.
NUM cmNetPortExtRefPrioMapProfile	1.3.6.1.4.1.2544.1.12.4.1.76.1.10	VariablePointer	read-write	This object allows to set priority map profile.
NUM cmPethPsePortExtAssociatedPort	1.3.6.1.4.1.2544.1.12.4.1.58.1.3	VariablePointer	read-write	This object means the oid of associated physical port.
NUM cmPrioMapV2ProfileAppliedObj	1.3.6.1.4.1.2544.1.12.4.1.74.1.1	VariablePointer	read-only	The object describe the profile Applied to. It maybe the access port or network port or flow etc.
NUM cmQosFlowPolicerAssociatedShaper	1.3.6.1.4.1.2544.1.12.4.1.11.1.17	VariablePointer	read-create	This object allows specification of the QOS Shaper associated with this Policer. Multiple Policers can map to single Shaper. The corresponding row with the specified QOS value must exist in cmQosShaperTable when this value is specified.
NUM cmQosFlowPolicerEnvelopeObject	1.3.6.1.4.1.2544.1.12.4.1.11.1.24	VariablePointer	read-write	This object allows specification of envelope object.
NUM cmQosPolicerV2AssociatedProfile	1.3.6.1.4.1.2544.1.12.4.1.41.1.6	VariablePointer	read-create	This object define the queue profile ID to be used, it is associated with the cmQosPolicerProfileIndex.
NUM cmQosShaperV2AssociatedQueueProfile	1.3.6.1.4.1.2544.1.12.4.1.42.1.5	VariablePointer	read-create	This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex.
NUM cmTrafficPortQosShaperAssociatedQueueProfile	1.3.6.1.4.1.2544.1.12.4.1.43.1.5	VariablePointer	read-create	This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex.
NUM e1t1IdlePatternProfile	1.3.6.1.4.1.2544.1.12.4.1.50.1.20	VariablePointer	read-write	This object allows selecting Idle Pattern Profile for the E1/T1 interface. Idle Patter Profile is represented by an object in the f3Pwe3IdlePatternProfileTable
NUM e1t1LoopbackProfile	1.3.6.1.4.1.2544.1.12.4.1.50.1.21	VariablePointer	read-write	This object allows selecting Loopback Profile for the E1/T1 interface. Loopback Profile is represented by an object in the f3Pwe3LoopbackProfileTable
NUM e1t1RelatedContainerId	1.3.6.1.4.1.2544.1.12.4.1.50.1.22	VariablePointer	read-only	This object describes the related container VCG.
NUM e1t1TimingDomain	1.3.6.1.4.1.2544.1.12.4.1.50.1.18	VariablePointer	read-write	This object represents Timing Domain that the E1/T1 interface uses as timing source. The Timing Domain is a Synchronization Entity represented by an object in the f3SyncTable
NUM e3t3RelatedContainerId	1.3.6.1.4.1.2544.1.12.4.1.51.1.17	VariablePointer	read-only	This object describe the related contained VCG.
NUM f3EnvelopeAssocPolicer	1.3.6.1.4.1.2544.1.12.4.1.83.1.1	VariablePointer	read-only	Pointer to a policer instance which is associated with envelope.
NUM f3FpQosPolicerEnvelopeObject	1.3.6.1.4.1.2544.1.12.4.1.96.1.21	VariablePointer	read-write	This object allows specification of envelope object.
NUM f3PulsePerSecondPortTODSource	1.3.6.1.4.1.2544.1.12.4.1.53.1.9	VariablePointer	read-write	This object allows to set the Pulse Per Second Source for the Port.
NUM f3SatelliteGnssReceiverPort	1.3.6.1.4.1.2544.1.12.4.1.93.1.9	VariablePointer	read-only	This object provides the GNSS Receiver Port OID related to this Satellite Entry.
NUM f3TimeOfDayPortTODSource	1.3.6.1.4.1.2544.1.12.4.1.55.1.9	VariablePointer	read-write	This object allows to set the Time Of Day Source for the Port.
NUM gps10MHzPortFrequencySource	1.3.6.1.4.1.2544.1.12.4.1.18.1.10	VariablePointer	read-write	This object allows to set the Frequency Source for the Port.
NUM pps16PortGroupTODSource	1.3.6.1.4.1.2544.1.12.4.1.79.1.8	VariablePointer	read-only	This object allows to set the Pulse Per Second Source for the Port.
NUM todPps16PortGroupTODSource	1.3.6.1.4.1.2544.1.12.4.1.81.1.9	VariablePointer	read-only	This object allows to set the Time Of Day Source for the Port.
VDSLProfileField (1)
VDS cmEthernetNetPortXdslCurVdslProfile	1.3.6.1.4.1.2544.1.12.4.1.104.1.7	VDSLProfileField	read-only	Selected vdsl profile.
VDSLProfileFields (1)
VDS cmEthernetNetPortXdslVdslProfile	1.3.6.1.4.1.2544.1.12.4.1.104.1.5	VDSLProfileFields	read-write	Selected vdsl profile.
VlanId (22)
VLA cmEncapFlowPointCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.113.1.6	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3EncapFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmEncapFlowPointSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.113.1.9	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3EncapFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmEthernetAccPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.67.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
VLA cmEthernetAccPortPortVlanId	1.3.6.1.4.1.2544.1.12.4.1.1.1.87	VlanId	read-write	This object allows to specify the Ethernet Access Port VLAN Id to PUSH on untagged frames in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled is set to true.
VLA cmEthernetAccPortSwapPriorityVID	1.3.6.1.4.1.2544.1.12.4.1.1.1.117	VlanId	read-write	This object allows to specify the value of Vlan Id for the Swapping of Priority Vlan Id operation for both the A2N and N2A direction.
VLA cmEthernetNetPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.68.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
VLA cmEthernetNetPortPppoeInnerVlanId	1.3.6.1.4.1.2544.1.12.4.1.103.1.7	VlanId	read-write	This object specify vlan id of inner tag.
VLA cmEthernetNetPortPppoeOuterVlanId	1.3.6.1.4.1.2544.1.12.4.1.103.1.3	VlanId	read-write	This object specify vlan id of outer tag.
VLA cmEthernetTrafficPortJDSULoopbackVlan	1.3.6.1.4.1.2544.1.12.4.1.94.1.2	VlanId	read-only	Applicable when port in JDSU VLAN loopback.
VLA cmEthernetTrafficPortJdsuLoopbackVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.109	VlanId	read-only	This object allows to set the jdsu loopback vlan. if status is jdsu-terminal-port-tailend(19) or jdsu-facility-port-tailend(21), then VID is 0 means not applicable. Note: This object is deprecated.
VLA cmEthernetTrafficPortPortVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.69	VlanId	read-write	This object allows to specify the Ethernet Port VLAN Id to PUSH on untagged frames in the to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled is set to true.
VLA cmEthernetTrafficPortPriorityVlanId	1.3.6.1.4.1.2544.1.12.4.1.27.1.71	VlanId	read-write	This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is only applicable for connection-oriented, evpl service type. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortSwapPriorityVID
VLA cmEthernetTrafficPortSwapPriorityVID	1.3.6.1.4.1.2544.1.12.4.1.27.1.127	VlanId	read-write	This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is only applicable for connection-oriented, evpl service type.
VLA cmFlowCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.4.1.31	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push', 'swapvid' and 'pushvid' control types. This object is not applicable for Tranparent Flow; the value should be 0.
VLA cmFlowPointCTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.29.1.14	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmFlowPointSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.29.1.17	VlanId	read-create	This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.
VLA cmFlowSTagVlanId	1.3.6.1.4.1.2544.1.12.4.1.4.1.35	VlanId	read-create	This object allows specification of the VLAN Id to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
VLA cmTrafficAclVlanId	1.3.6.1.4.1.2544.1.12.4.1.38.1.28	VlanId	read-write	This object describes the vlan Id of Acl entry.
VLA f3AclRuleInnerVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.19	VlanId	read-write	The ACL rule Inner Vlan ID high limit.
VLA f3AclRuleInnerVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.18	VlanId	read-write	The ACL rule inner Vlan ID low limit.
VLA f3AclRuleOuterVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.16	VlanId	read-write	The ACL rule outer Vlan ID high limit.
VLA f3AclRuleOuterVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.15	VlanId	read-write	The ACL rule outer Vlan ID low limit.
VlanPriority (68)
VLA cmAccPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.22.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmAccPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.22.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
VLA cmAccPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.23.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmAccPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.23.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmAccPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.21.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
VLA cmAccPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.21.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmAccPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.21.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmEgressOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.32.1.4	VlanPriority	read-write	This object defines the new priority bits to be used, it is available only if Outer-Tag PRIOCTL is set to SWAP.
VLA cmEncapFlowPointCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.113.1.7	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3EncapFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
VLA cmEncapFlowPointSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.113.1.10	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3EncapFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
VLA cmEthernetAccPortPortVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.1.1.88	VlanPriority	read-write	This object allows to specify the Ethernet Access Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetAccPortPortVlanId) on untagged frames in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled is set to true.
VLA cmEthernetNetPortPppoeInnerVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.103.1.8	VlanPriority	read-write	This object specify vlan priority of inner tag.
VLA cmEthernetNetPortPppoeOuterVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.103.1.4	VlanPriority	read-write	This object specify vlan priority of outer tag.
VLA cmEthernetTrafficPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.63.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmEthernetTrafficPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.63.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
VLA cmEthernetTrafficPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.64.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmEthernetTrafficPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.64.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmEthernetTrafficPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.62.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
VLA cmEthernetTrafficPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.62.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmEthernetTrafficPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.62.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmEthernetTrafficPortPortVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.27.1.70	VlanPriority	read-write	This object allows to specify the Ethernet Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetTrafficPortPortVlanId) on untagged frames in the ingress direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled is set to true.
VLA cmFlowCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.4.1.32	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
VLA cmFlowPointCTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.15	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.
VLA cmFlowPointSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.29.1.18	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.
VLA cmFlowSTagVlanPriority	1.3.6.1.4.1.2544.1.12.4.1.4.1.36	VlanPriority	read-create	This object allows specification of the VLAN Priority to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0.
VLA cmNetPortEncapPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.91.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortEncapPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.91.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming EncapPcp value.
VLA cmNetPortEncapPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.92.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmNetPortEncapPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.92.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortEncapPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.90.1.4	VlanPriority	read-write	This object is the EncapPcp value that has a priority value with implicit drop eligibility encoded into it.
VLA cmNetPortEncapPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.90.1.3	VlanPriority	read-write	This object is the EncapPcp value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmNetPortEncapPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.90.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmNetPortExpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.85.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortExpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.85.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming Exp value.
VLA cmNetPortExpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.86.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmNetPortExpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.86.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortExpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.84.1.4	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop eligibility encoded into it.
VLA cmNetPortExpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.84.1.3	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmNetPortExpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.84.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmNetPortIpPrecDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.88.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortIpPrecDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.88.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming IpPrec value.
VLA cmNetPortIpPrecDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.89.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmNetPortIpPrecDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.89.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortIpPrecDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.87.1.4	VlanPriority	read-write	This object is the IpPrec value that has a priority value with implicit drop eligibility encoded into it.
VLA cmNetPortIpPrecDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.87.1.3	VlanPriority	read-write	This object is the IpPrec value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmNetPortIpPrecDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.87.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmNetPortPcpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.25.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA cmNetPortPcpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.25.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming PCP value.
VLA cmNetPortPcpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.26.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA cmNetPortPcpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.26.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA cmNetPortPcpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.24.1.4	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.
VLA cmNetPortPcpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.24.1.3	VlanPriority	read-write	This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.
VLA cmNetPortPcpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.24.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VLA cmNetPortPrioMapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.20.1.4	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (N2A direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowN2AOuterTagPrioEnabled'.
VLA cmPrioMapInnerTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.7	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority. Note that, each flow participates or not in inner-tag priority mapping, using the object 'cmFlowInnerTagPrioEnabled'.
VLA cmPrioMapOuterTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.6	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowOuterTagPrioEnabled'.
VLA cmPrioMapXTagPriority	1.3.6.1.4.1.2544.1.12.4.1.10.1.4	VlanPriority	read-write	This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapXTagControl as 'swap'.
VLA f3AclRuleInnerVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.25	VlanPriority	read-write	The ACL rule inner vlan PCP priority high limit.
VLA f3AclRuleInnerVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.24	VlanPriority	read-write	The ACL rule inner vlan PCP priority low limit.
VLA f3AclRuleOuterVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.22	VlanPriority	read-write	The ACL rule outer vlan PCP priority high limit.
VLA f3AclRuleOuterVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.4.1.99.1.21	VlanPriority	read-write	The ACL rule outer vlan PCP priority low limit.
VLA f3EthernetTrafficPortExpDEDecInPriority	1.3.6.1.4.1.2544.1.12.4.1.101.1.2	VlanPriority	read-write	This object is the input priority that is decoded to get priority and the drop eligibility of a frame.
VLA f3EthernetTrafficPortExpDEDecOutPriority	1.3.6.1.4.1.2544.1.12.4.1.101.1.3	VlanPriority	read-write	This object is the priority value decoded from a incoming Exp value.
VLA f3EthernetTrafficPortExpDEDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.102.1.3	VlanPriority	read-write	This object is the drop eligible priority.
VLA f3EthernetTrafficPortExpDEDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.102.1.2	VlanPriority	read-write	This object is the drop ineligible priority.
VLA f3EthernetTrafficPortExpDEEncDropEligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.100.1.4	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop eligibility encoded into it.
VLA f3EthernetTrafficPortExpDEEncDropIneligiblePrio	1.3.6.1.4.1.2544.1.12.4.1.100.1.3	VlanPriority	read-write	This object is the Exp value that has a priority value with implicit drop ineligibility encoded into it.
VLA f3EthernetTrafficPortExpDEEncInPriority	1.3.6.1.4.1.2544.1.12.4.1.100.1.2	VlanPriority	read-write	This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.
VlanTagType (5)
VLA cmEthernetAccPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.1.1.119	VlanTagType	read-write	Indicates which VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is only applicable on products when Flowpoint Model is supported. inner-vlantag: The inner VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no inner VLAN tag (untagged or single-tagged) will have a COS equal to the default COS of the port. outer-vlantag: The outer VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no outer VLAN tag (untagged) will have a COS equal to the default COS of the port. This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
VLA cmEthernetNetPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.7.1.108	VlanTagType	read-write	Indicates the VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is only applicable on products when Flowpoint Model is supported. inner-vlantag: The inner VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no inner VLAN tag (untagged or single-tagged) will have a COS equal to the default COS of the port. outer-vlantag: The outer VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no outer VLAN tag (untagged) will have a COS equal to the default COS of the port. This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
VLA cmEthernetTrafficPortIngressCOSPriority	1.3.6.1.4.1.2544.1.12.4.1.27.1.73	VlanTagType	read-create	This object is used to specify whether the EthernetTrafficPort uses the inner-tag or the outer-tag in determining the COS (Class of Service). This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner.
VLA cmFlowN2ACOSPriorityTagType	1.3.6.1.4.1.2544.1.12.4.1.4.1.38	VlanTagType	read-create	This object is used to specify whether the flow uses the inner-tag or the outer-tag in determining the COS (Class of Service) in the N2A direction. This object is applicable in the case of a Multi COS Flow. This object is not supported for Tranparent Flow;
VLA cmPrioMapV2ProfileIngressCosPriority	1.3.6.1.4.1.2544.1.12.4.1.70.1.6	VlanTagType	read-create	This object is used to specify whether the profile uses the inner-tag or the outer-tag in determining the COS (Class of Service).
WIFIEncryptionType (1)
WIF f3UsbWIFIDonglePortEncryption	1.3.6.1.4.1.2544.1.12.4.1.77.1.9	WIFIEncryptionType	read-write	The encryption type of this port.
XDSLAnnex (1)
XDS cmEthernetNetPortXdslAnnex	1.3.6.1.4.1.2544.1.12.4.1.104.1.13	XDSLAnnex	read-only	Annex version after handshake.
XDSLCarrierSet (1)
XDS cmEthernetNetPortXdslCarrierSet	1.3.6.1.4.1.2544.1.12.4.1.104.1.11	XDSLCarrierSet	read-write	Specify the carrier set.
XDSLControlChannel (1)
XDS cmEthernetNetPortXdslControlChannel	1.3.6.1.4.1.2544.1.12.4.1.104.1.10	XDSLControlChannel	read-write	Actual link rate downstream.
XDSLMode (1)
XDS cmEthernetNetPortXdslMode	1.3.6.1.4.1.2544.1.12.4.1.104.1.12	XDSLMode	read-only	Xdsl mode after handshake.
XDSLModulationMode (1)
XDS cmEthernetNetPortXdslModulationMode	1.3.6.1.4.1.2544.1.12.4.1.104.1.2	XDSLModulationMode	read-write	Xdsl modulation.
XDSLStatus (1)
XDS cmEthernetNetPortXdslStatus	1.3.6.1.4.1.2544.1.12.4.1.104.1.6	XDSLStatus	read-only	Xdsl link status.
XgePhyType (3)
XGE cmEthernetAccPortXgePhyType	1.3.6.1.4.1.2544.1.12.4.1.1.1.100	XgePhyType	read-write	This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps. This attribute is only applicable for ports configured to work at speed-10G-full. For other speeds the value of this object must be 'not-applicable' and cannot be changed.
XGE cmEthernetNetPortXgePhyType	1.3.6.1.4.1.2544.1.12.4.1.7.1.92	XgePhyType	read-write	This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps. This attribute is only applicable for ports configured to work at speed-10G-full. For other speeds the value of this object must be 'not-applicable' and cannot be changed.
XGE cmEthernetTrafficPortPhyType	1.3.6.1.4.1.2544.1.12.4.1.27.1.80	XgePhyType	read-write	This object is valid only to XGE card. And the value should be LAN or WAN when it is XGE card.
No type (282)
bits8PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.78.1		not-accessible	A conceptual row in the bits8PortGroupTable.
bits8PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.34			A collection of objects used to manage the Bits 8 Port Group function.
bits8PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.78		not-accessible	A list of entries corresponding to BITS 8 Port Group Facilities for configuration purposes.
bitsPortEntry	1.3.6.1.4.1.2544.1.12.4.1.16.1		not-accessible	A conceptual row in the bitsPortTable.
bitsPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.5			A collection of objects used to manage the F3 Bits Port function.
bitsPortTable	1.3.6.1.4.1.2544.1.12.4.1.16		not-accessible	A list of entries corresponding to BITS Port Facilities for configuration purposes.
ccGroup	1.3.6.1.4.1.2544.1.12.4.2.2.53			A collection of objects used to manage the CC Card.
ccGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.112.1		not-accessible	A conceptual row in the ccGroupTable.
ccGroupTable	1.3.6.1.4.1.2544.1.12.4.1.112		not-accessible	A list of entries corresponding to Composite group output Facilities for configuration purposes.
ccInputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.111.1		not-accessible	A conceptual row in the ccInputPortTable.
ccInputPortTable	1.3.6.1.4.1.2544.1.12.4.1.111		not-accessible	A list of entries corresponding to Composite input Port Facilities for configuration purposes.
clk16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.80.1		not-accessible	A conceptual row in the clk16PortGroupTable.
clk16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.36			A collection of objects used to manage the CLK 16 port card Group function.
clk16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.80		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
cmAccPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.75.1		not-accessible	A conceptual row in the cmAccPortExtTable.
cmAccPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.75		not-accessible	A list of entries corresponding to Access Port for configuration purposes.
cmAccPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.22.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
cmAccPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.22		not-accessible	Ethernet Access Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmAccPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.21.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
cmAccPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.21		not-accessible	Ethernet Access Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Access port.
cmAccPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.23.1		not-accessible	A conceptual row in the cmAccPortPcpDEPairEntry.
cmAccPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.23		not-accessible	Ethernet Access Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmAccPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.12.1		not-accessible	A conceptual row in the cmAccPortQosShaperTable. These entries represent a Quality of Service Shaper.
cmAccPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.12		not-accessible	A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port is in evpl mode and are relevant for traffic in the network to access direction.
cmEgressPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.32.1		not-accessible	A conceptual row in the cmEgressPrioMapTable.
cmEgressPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.32		not-accessible	A list of entries corresponding to Egress Priority Mapping for configuration purposes.
cmElineFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.28.1		not-accessible	A conceptual row in the cmElineFlowTable. These entries represent an Flow.
cmElineFlowTable	1.3.6.1.4.1.2544.1.12.4.1.28		not-accessible	A list of entries corresponding to Flows for configuration purposes.
cmEncapFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.113.1		not-accessible	A conceptual row in the cmEncapFlowPointTable. These entries represent an Encap FlowPoint.
cmEncapFlowPointGroup	1.3.6.1.4.1.2544.1.12.4.2.2.54			A collection of objects used to manage the encap flow point entry Group.
cmEncapFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.113		not-accessible	A list of entries corresponding to Encap FlowPoint for configuration purposes.
cmEthernetAccPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.3.1		not-accessible	A conceptual row in the cmEthernetAccPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Access Port.
cmEthernetAccPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.3		not-accessible	A list of entries corresponding to Ethernet Access Port Cable Length Benchmark.
cmEthernetAccPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.2.1		not-accessible	A conceptual row in the cmEthernetAccPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port.
cmEthernetAccPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.2		not-accessible	A list of entries corresponding to Ethernet Access Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
cmEthernetAccPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.13.1		not-accessible	A conceptual row in the cmEthernetAccPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port.
cmEthernetAccPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.13		not-accessible	A list of entries corresponding to Ethernet Access Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device.
cmEthernetAccPortEntry	1.3.6.1.4.1.2544.1.12.4.1.1.1		not-accessible	A conceptual row in the cmEthernetAccPortTable.
cmEthernetAccPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.67.1		not-accessible	A conceptual row in the cmEthernetAccPortJdsuExtTable.
cmEthernetAccPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.67		not-accessible	A list of entries corresponding to Ethernet Access Port Facilities for JDSU configuration purposes.
cmEthernetAccPortTable	1.3.6.1.4.1.2544.1.12.4.1.1		not-accessible	A list of entries corresponding to Ethernet Access Port Facilities for configuration purposes.
cmEthernetFlowPointCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.36.1		not-accessible	A conceptual row in the cmEthernetFlowPointCpdTable.
cmEthernetFlowPointCpdTable	1.3.6.1.4.1.2544.1.12.4.1.36		not-accessible	A list of entries corresponding to Ethernet Flow Point CPD for configuration purposes.
cmEthernetMgmtPortEntry	1.3.6.1.4.1.2544.1.12.4.1.9.1		not-accessible	A conceptual row in the cmEthernetMgmtPortTable.
cmEthernetMgmtPortTable	1.3.6.1.4.1.2544.1.12.4.1.9		not-accessible	A list of entries corresponding to Ethernet Management Port Facilities for configuration purposes.
cmEthernetNetPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.19.1		not-accessible	A conceptual row in the cmEthernetNetPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Network Port.
cmEthernetNetPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.19		not-accessible	A list of entries corresponding to Ethernet Network Port Cable Length Benchmark.
cmEthernetNetPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.8.1		not-accessible	A conceptual row in the cmEthernetNetPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
cmEthernetNetPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.8		not-accessible	A list of entries corresponding to Ethernet Network Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
cmEthernetNetPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.15.1		not-accessible	A conceptual row in the cmEthernetNetPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
cmEthernetNetPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.15		not-accessible	A list of entries corresponding to Ethernet Network Port Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices.
cmEthernetNetPortEntry	1.3.6.1.4.1.2544.1.12.4.1.7.1		not-accessible	A conceptual row in the cmEthernetNetPortTable.
cmEthernetNetPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.56.1		not-accessible	A conceptual row in the cmEthernetNetPortExtTable.
cmEthernetNetPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.56		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes.
cmEthernetNetPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.68.1		not-accessible	A conceptual row in the cmEthernetNetPortJdsuExtTable.
cmEthernetNetPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.68		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for JDSU configuration purposes.
cmEthernetNetPortPppoeParamEntry	1.3.6.1.4.1.2544.1.12.4.1.103.1		not-accessible	A conceptual row in the cmEthernetNetPortPppoeParamTable.
cmEthernetNetPortPppoeParamTable	1.3.6.1.4.1.2544.1.12.4.1.103		not-accessible	A list of entries corresponding to Ethernet Network Port PPPoE Parameters for configuration purposes.
cmEthernetNetPortTable	1.3.6.1.4.1.2544.1.12.4.1.7		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes.
cmEthernetNetPortXdslParamEntry	1.3.6.1.4.1.2544.1.12.4.1.104.1		not-accessible	A conceptual row in the cmEthernetNetPortXdslParamTable.
cmEthernetNetPortXdslParamTable	1.3.6.1.4.1.2544.1.12.4.1.104		not-accessible	A list of entries corresponding to Ethernet Network Port XDSL Parameters for configuration purposes.
cmEthernetTrafficPortClbEntry	1.3.6.1.4.1.2544.1.12.4.1.65.1		not-accessible	A conceptual row in the cmEthernetTrafficPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Traffic Port.
cmEthernetTrafficPortClbTable	1.3.6.1.4.1.2544.1.12.4.1.65		not-accessible	A list of entries corresponding to Ethernet Traffic Port Cable Length Benchmark.
cmEthernetTrafficPortCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.35.1		not-accessible	A conceptual row in the cmEthernetTrafficPortCpdTable.
cmEthernetTrafficPortCpdTable	1.3.6.1.4.1.2544.1.12.4.1.35		not-accessible	A list of entries corresponding to Ethernet Port CPD for configuration purposes.
cmEthernetTrafficPortCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.97.1		not-accessible	A conceptual row in the cmEthernetTrafficPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Traffic Port.
cmEthernetTrafficPortCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.97		not-accessible	A list of entries corresponding to Ethernet Traffic Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device.
cmEthernetTrafficPortEntry	1.3.6.1.4.1.2544.1.12.4.1.27.1		not-accessible	A conceptual row in the cmEthernetTrafficPortTable.
cmEthernetTrafficPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.52.1		not-accessible	A conceptual row in the cmEthernetTrafficPortExtTable.
cmEthernetTrafficPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.52		not-accessible	A list of entries corresponding to Ethernet Facilities for configuration purposes.
cmEthernetTrafficPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.27			A collection of objects used to manage the traffic port entry Group.
cmEthernetTrafficPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.4.1.94.1		not-accessible	A conceptual row in the cmEthernetTrafficPortJdsuExtTable.
cmEthernetTrafficPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.43			A collection of objects used to manage the F3 Ethernet Traffic Port JDSU extense function.
cmEthernetTrafficPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.4.1.94		not-accessible	A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes.
cmEthernetTrafficPortLpbkEntry	1.3.6.1.4.1.2544.1.12.4.1.69.1		not-accessible	A conceptual row in the cmEthernetTrafficPortLpbkTable. These entries represent Vlan loopback on the Ethernet Traffic Port.
cmEthernetTrafficPortLpbkTable	1.3.6.1.4.1.2544.1.12.4.1.69		not-accessible	A list of entries corresponding to Vlan loopback on Ethernet Traffic Port.
cmEthernetTrafficPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.63.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
cmEthernetTrafficPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.63		not-accessible	EthernetTraffic Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmEthernetTrafficPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.62.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
cmEthernetTrafficPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.62		not-accessible	EthernetTraffic Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the EthernetTraffic port.
cmEthernetTrafficPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.64.1		not-accessible	A conceptual row in the cmAccPortPcpDEPairEntry.
cmEthernetTrafficPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.64		not-accessible	EthernetTraffic Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmEthernetTrafficPortPcpGroup	1.3.6.1.4.1.2544.1.12.4.2.2.25			A collection of objects used to manage the traffic port pcp Group.
cmEthernetTrafficPortTable	1.3.6.1.4.1.2544.1.12.4.1.27		not-accessible	A list of entries corresponding to Ethernet Facilities for configuration purposes.
cmFacilityCompliance	1.3.6.1.4.1.2544.1.12.4.2.1.1			Describes the requirements for conformance to the CM Facility group.
cmFacilityCompliances	1.3.6.1.4.1.2544.1.12.4.2.1
cmFacilityConformance	1.3.6.1.4.1.2544.1.12.4.2
cmFacilityGroups	1.3.6.1.4.1.2544.1.12.4.2.2
cmFacilityMIB	1.3.6.1.4.1.2544.1.12.4			This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
cmFacilityObjectGroup	1.3.6.1.4.1.2544.1.12.4.2.2.1			*******************THIS GROUP IS NOW DEPRECATED ******************* A collection of objects used to manage the CM Facility group.
cmFacilityObjects	1.3.6.1.4.1.2544.1.12.4.1
cmFlowCpdEntry	1.3.6.1.4.1.2544.1.12.4.1.5.1		not-accessible	A conceptual row in the cmFlowCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port.
cmFlowCpdTable	1.3.6.1.4.1.2544.1.12.4.1.5		not-accessible	A list of entries corresponding to Flow Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x.
cmFlowCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.14.1		not-accessible	A conceptual row in the cmFlowCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Flow.
cmFlowCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.14		not-accessible	A list of entries corresponding to Ethernet Flow Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices.
cmFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.4.1		not-accessible	A conceptual row in the cmFlowTable. These entries represent an Ethernet Flow.
cmFlowPointCpdProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.34.1		not-accessible	A conceptual row in the cmFlowPointCpdProfileTable. These entries represent a Control Protocol Disposition of a flow point filtering criteria of the System.
cmFlowPointCpdProfileTable	1.3.6.1.4.1.2544.1.12.4.1.34		not-accessible	A list of entries corresponding to System Control Protocol Disposition V3 profile.
cmFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.29.1		not-accessible	A conceptual row in the cmFlowPointTable. These entries represent an FlowPoint. If the flowpoint attached to a lag, the slotIndex should be 255(255 is used to identify the flowpoint belongs to lag), and the cmEthernetTrafficPortIndex should be the f3LagIndex.
cmFlowPointGroup	1.3.6.1.4.1.2544.1.12.4.2.2.28			A collection of objects used to manage the flow point entry Group.
cmFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.29		not-accessible	A list of entries corresponding to FlowPoint for configuration purposes.
cmFlowTable	1.3.6.1.4.1.2544.1.12.4.1.4		not-accessible	A list of entries corresponding to Ethernet Flows for configuration purposes. If the corresponding Ethernet Access Port's cmEthernetAccPortMode is connection-oriented and cmEthernetAccPortSvcType is epl, there exists a single Flow in this table. No Flow creation or deletion is allowed on this table for FSP150CM NTU based services. Since Fsp150 R5.6CC release this table is used to manage 2 types of Flows: - Access Port Flow as in the previous releases - Tranparent Flow (new in 5.6CC) A Transparent Flow is Flow between Network-1 and Network-2 ports used to convey pass-thru traffic in the ring topology e.g. ERP. Few of the existing attributes will have new semantix for Transperent Flow. Transparent Flow is a NE level object and hence has different indexing than the Access Port Flow. The valid indices are neIndex and cmFlowIndex. The remaining indices will have constant values as follows: shelfIndex = 1 slotIndex = 255 cmEthernetAccPortIndex = 0
cmIngressPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.31.1		not-accessible	A conceptual row in the cmIngressPrioMapTable.
cmIngressPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.31		not-accessible	A list of entries corresponding to Ingress Priority Mapping for configuration purposes.
cmMPFlowEntry	1.3.6.1.4.1.2544.1.12.4.1.60.1		not-accessible	A conceptual row in the cmMPFlowTable.
cmMPFlowGroup	1.3.6.1.4.1.2544.1.12.4.2.2.23			A collection of objects used to manage the MP flow entry Group.
cmMPFlowMemberEntry	1.3.6.1.4.1.2544.1.12.4.1.61.1		not-accessible	A conceptual row in the cmMPFlowMemberTable.
cmMPFlowMemberGroup	1.3.6.1.4.1.2544.1.12.4.2.2.24			A collection of objects used to manage the MP flow Member entry Group.
cmMPFlowMemberTable	1.3.6.1.4.1.2544.1.12.4.1.61		not-accessible	A list of entries corresponding to MPFlowMember.
cmMPFlowTable	1.3.6.1.4.1.2544.1.12.4.1.60		not-accessible	A list of entries corresponding to MPFlow.
cmNetPortEncapPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.91.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEDecTable.
cmNetPortEncapPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.91		not-accessible	Ethernet Network Port EncapPcp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmNetPortEncapPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.90.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEEncTable.
cmNetPortEncapPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.90		not-accessible	Ethernet Network Port EncapPcp drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortEncapPcpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.41			A collection of objects used to manage the encap PCP de decoding and encoding group function.
cmNetPortEncapPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.92.1		not-accessible	A conceptual row in the cmNetPortEncapPcpDEPairEntry.
cmNetPortEncapPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.92		not-accessible	Ethernet Network Port EncapPcp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the EncapPcp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmNetPortExpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.85.1		not-accessible	A conceptual row in the cmNetPortExpDEDecTable.
cmNetPortExpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.85		not-accessible	Ethernet Network Port Exp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmNetPortExpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.84.1		not-accessible	A conceptual row in the cmNetPortExpDEEncTable.
cmNetPortExpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.84		not-accessible	Ethernet Network Port Exp drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortExpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.39			A collection of objects used to manage the exp de decoding and encoding group function.
cmNetPortExpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.86.1		not-accessible	A conceptual row in the cmNetPortExpDEPairEntry.
cmNetPortExpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.86		not-accessible	Ethernet Network Port Exp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the Exp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmNetPortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.76.1		not-accessible	A conceptual row in the cmNetPortExtTable.
cmNetPortExtTable	1.3.6.1.4.1.2544.1.12.4.1.76		not-accessible	A list of entries corresponding to Network Port for configuration purposes.
cmNetPortIpPrecDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.88.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEDecTable.
cmNetPortIpPrecDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.88		not-accessible	Ethernet Network Port IpPrec drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmNetPortIpPrecDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.87.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEEncTable.
cmNetPortIpPrecDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.87		not-accessible	Ethernet Network Port IpPrec drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortIpPrecDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.40			A collection of objects used to manage the ip prec de decoding and encoding group function.
cmNetPortIpPrecDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.89.1		not-accessible	A conceptual row in the cmNetPortIpPrecDEPairEntry.
cmNetPortIpPrecDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.89		not-accessible	Ethernet Network Port IpPrec drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the IpPrec DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmNetPortPcpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.25.1		not-accessible	A conceptual row in the ethernetPBPcpDEDecPortTable.
cmNetPortPcpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.25		not-accessible	Ethernet Network Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
cmNetPortPcpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.24.1		not-accessible	A conceptual row in the ethernetPBPcpDEEncPortTable.
cmNetPortPcpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.24		not-accessible	Ethernet Network Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Network port.
cmNetPortPcpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.26.1		not-accessible	A conceptual row in the cmNetPortPcpDEPairEntry.
cmNetPortPcpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.26		not-accessible	Ethernet Network Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
cmNetPortPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.20.1		not-accessible	A conceptual row in the cmNetPortPrioMapTable.
cmNetPortPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.20		not-accessible	A list of entries corresponding to Ethernet Network Port Priority Mappings in multi Class of Service (COS) mode.
cmOAMFlowPointEntry	1.3.6.1.4.1.2544.1.12.4.1.30.1		not-accessible	A conceptual row in the cmOAMFlowPointTable. These entries represent an FlowPoint. If the oam flowpoint attached to a lag, the slotIndex should be 255(255 is used to identify the oam flowpoint belongs to lag), and the cmEthernetTrafficPortIndex should be the f3LagIndex.
cmOAMFlowPointTable	1.3.6.1.4.1.2544.1.12.4.1.30		not-accessible	A list of entries corresponding to OAMFlowPoint for configuration purposes.
cmPethPsePortExtEntry	1.3.6.1.4.1.2544.1.12.4.1.58.1		not-accessible	A conceptual row in the cmPethPsePortExtEntry.
cmPethPsePortExtTable	1.3.6.1.4.1.2544.1.12.4.1.58		not-accessible	A list of entries corresponding to PsePortExtEntry.
cmPortCpdProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.33.1		not-accessible	A conceptual row in the cmPortCpdProfileTable. These entries represent a Control Protocol Disposition of a port filtering criteria of the System.
cmPortCpdProfileTable	1.3.6.1.4.1.2544.1.12.4.1.33		not-accessible	A list of entries corresponding to System Control Protocol Disposition V3 profile.
cmPrioMapEntry	1.3.6.1.4.1.2544.1.12.4.1.10.1		not-accessible	A conceptual row in the cmPrioMapTable.
cmPrioMapTable	1.3.6.1.4.1.2544.1.12.4.1.10		not-accessible	A list of entries corresponding to Ethernet Priority Mappings in multi Class of Service (COS) mode. This table is applicable only when the Access Port is in connection-oriented evpl mode.
cmPrioMapV2IngressPrioMappingEntry	1.3.6.1.4.1.2544.1.12.4.1.71.1		not-accessible	A conceptual row in the cmPrioMapV2IngressPrioMappingTable.
cmPrioMapV2IngressPrioMappingGroup	1.3.6.1.4.1.2544.1.12.4.2.2.33			A collection of objects used to manage the priority map group.
cmPrioMapV2IngressPrioMappingTable	1.3.6.1.4.1.2544.1.12.4.1.71		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
cmPrioMapV2PrioMappingCOSEntry	1.3.6.1.4.1.2544.1.12.4.1.72.1		not-accessible	A conceptual row in the cmPrioMapV2PrioMappingCOSTable.
cmPrioMapV2PrioMappingCOSTable	1.3.6.1.4.1.2544.1.12.4.1.72		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
cmPrioMapV2PrioMappingPriEntry	1.3.6.1.4.1.2544.1.12.4.1.73.1		not-accessible	A conceptual row in the cmPrioMapV2PrioMappingPriTable.
cmPrioMapV2PrioMappingPriTable	1.3.6.1.4.1.2544.1.12.4.1.73		not-accessible	A list of entries corresponding to Ethernet Priority Mappings.
cmPrioMapV2ProfileAppliedObjEntry	1.3.6.1.4.1.2544.1.12.4.1.74.1		not-accessible	A conceptual row in the cmPrioMapV2ProfileAppliedObjTable.
cmPrioMapV2ProfileAppliedObjTable	1.3.6.1.4.1.2544.1.12.4.1.74		not-accessible	A list of entries corresponding to Ethernet Priority Mappings V2 Profile AppliedObj.
cmPrioMapV2ProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.70.1		not-accessible	A conceptual row in the cmPrioMapV2ProfileTable.
cmPrioMapV2ProfileGroup	1.3.6.1.4.1.2544.1.12.4.2.2.32			A collection of objects used to manage the priority map profile group.
cmPrioMapV2ProfileTable	1.3.6.1.4.1.2544.1.12.4.1.70		not-accessible	A list of entries corresponding to Ethernet Priority Mappings V2 Profile.
cmPseEXTGroup	1.3.6.1.4.1.2544.1.12.4.2.2.22			A collection of objects used to manage the pse group ext entry Group.
cmPsePortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.21			A collection of objects used to manage the pse port ext entry Group.
cmQosFlowPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.11.1		not-accessible	A conceptual row in the cmQosFlowPolicerTable. These entries represent a Quality of Service Policer.
cmQosFlowPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.11		not-accessible	A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes.
cmQosPolicerProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.39.1		not-accessible	A conceptual row in the cmQosPolicerProfileTable. These entries represent a Quality of Service Policer.
cmQosPolicerProfileTable	1.3.6.1.4.1.2544.1.12.4.1.39		not-accessible	A list of entries corresponding to Quality of Service Policer for configuration purposes.
cmQosPolicerV2Entry	1.3.6.1.4.1.2544.1.12.4.1.41.1		not-accessible	A conceptual row in the cmQosPolicerV2Table. These entries represent a Quality of Service Policer.
cmQosPolicerV2Table	1.3.6.1.4.1.2544.1.12.4.1.41		not-accessible	A list of entries corresponding to Quality of Service Policer for configuration purposes.
cmQosQueueProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.40.1		not-accessible	A conceptual row in the cmQosQueueProfileTable. These entries represent a Quality of Service Queue.
cmQosQueueProfileTable	1.3.6.1.4.1.2544.1.12.4.1.40		not-accessible	A list of entries corresponding to Quality of Service Queue for configuration purposes.
cmQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.6.1		not-accessible	A conceptual row in the cmQosShaperTable. These entries represent a Quality of Service Shaper.
cmQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.6		not-accessible	A list of entries corresponding to Ethernet Quality of Service Shaper for configuration purposes.
cmQosShaperV2Entry	1.3.6.1.4.1.2544.1.12.4.1.42.1		not-accessible	A conceptual row in the cmQosShaperV2Table. These entries represent a Quality of Service Shaper.
cmQosShaperV2Table	1.3.6.1.4.1.2544.1.12.4.1.42		not-accessible	A list of entries corresponding to Quality of Service ShaperV2 for configuration purposes.
cmTrafficAclProfileEntry	1.3.6.1.4.1.2544.1.12.4.1.37.1		not-accessible	An entry containing information applicable to a system ACL Profile that can be configured.
cmTrafficAclProfileTable	1.3.6.1.4.1.2544.1.12.4.1.37		not-accessible	A list of entries corresponding to the Traffic Profile Rules Entry. It provides upto 4000 Traffic ACL Rules to be configured.
cmTrafficAclRulesEntry	1.3.6.1.4.1.2544.1.12.4.1.38.1		not-accessible	An entry containing information applicable to a system ACL Rules that can be configured.
cmTrafficAclRulesTable	1.3.6.1.4.1.2544.1.12.4.1.38		not-accessible	A list of entries corresponding to the Traffic ACL Rules Entry.
cmTrafficPortLpbkGroup	1.3.6.1.4.1.2544.1.12.4.2.2.31			A collection of objects used to manage the traffic port lpbk group.
cmTrafficPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.43.1		not-accessible	A conceptual row in the cmTrafficPortQosShaperTable. These entries represent a Quality of Service Shaper.
cmTrafficPortQosShaperGroup	1.3.6.1.4.1.2544.1.12.4.2.2.51			A collection of objects used to manage the Ethernet Traffic Port QOS Shaper.
cmTrafficPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.43		not-accessible	A list of entries corresponding to Quality of Service Shaper for configuration purposes.
cpdV2Group	1.3.6.1.4.1.2544.1.12.4.2.2.9			A collection of objects used to manage the Control Protocol Disposition version 2 function.
cpdV2TrafficPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.46			A collection of objects used to manage the Control Protocol Disposition version 2 function.
e1t1Entry	1.3.6.1.4.1.2544.1.12.4.1.50.1		not-accessible	A conceptual row in the e1t1Table.
e1t1InterfaceGroup	1.3.6.1.4.1.2544.1.12.4.2.2.14			A collection of objects used to manage the E1/T1 Interface Group.
e1t1Table	1.3.6.1.4.1.2544.1.12.4.1.50		not-accessible	A list of entries corresponding to E1/T1.
e3t3Entry	1.3.6.1.4.1.2544.1.12.4.1.51.1		not-accessible	A conceptual row in the e3t3Table.
e3t3InterfaceGroup	1.3.6.1.4.1.2544.1.12.4.2.2.15			A collection of objects used to manage the E3/T3 Interface Group.
e3t3Table	1.3.6.1.4.1.2544.1.12.4.1.51		not-accessible	A list of entries corresponding to E3/T3.
ethernetAccessPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.2			A collection of objects used to manage the F3 Ethernet Access Port function.
ethernetAccessPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.29			A collection of objects used to manage the F3 Ethernet Access Port JDSU extense function.
ethernetMgmtPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.4			A collection of objects used to manage the F3 Ethernet Management Port function.
ethernetNetworkPortExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.19			A collection of objects used to manage the F3 Ethernet Network Port extense function.
ethernetNetworkPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.3			A collection of objects used to manage the F3 Ethernet Network Port function.
ethernetNetworkPortJdsuExtGroup	1.3.6.1.4.1.2544.1.12.4.2.2.30			A collection of objects used to manage the F3 Ethernet Network Port JDSU extense function.
f3AclRuleEntry	1.3.6.1.4.1.2544.1.12.4.1.99.1		not-accessible	A conceptual row in the f3AclRuleTable.
f3AclRuleGroup	1.3.6.1.4.1.2544.1.12.4.2.2.47			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint ACL Rule.
f3AclRuleTable	1.3.6.1.4.1.2544.1.12.4.1.99		not-accessible	A list of entries for the L2 ACL rule.
f3EnvelopeAssocPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.83.1		not-accessible	A conceptual row in the f3EnvelopeAssocPolicerTable.
f3EnvelopeAssocPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.83		not-accessible	A list of entries corresponding to Flows which are envelope associated policers instance
f3EthernetTrafficPortExpDEDecEntry	1.3.6.1.4.1.2544.1.12.4.1.101.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEDecTable.
f3EthernetTrafficPortExpDEDecTable	1.3.6.1.4.1.2544.1.12.4.1.101		not-accessible	Ethernet Traffic Port Exp drop eligibility decoding table. This is applied to a frame that is ingressing at a port.
f3EthernetTrafficPortExpDEEncEntry	1.3.6.1.4.1.2544.1.12.4.1.100.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEEncTable.
f3EthernetTrafficPortExpDEEncTable	1.3.6.1.4.1.2544.1.12.4.1.100		not-accessible	Ethernet Traffic Port Exp drop eligibility encoding table. This is applied to a frame that is egressing at the Traffic Port.
f3EthernetTrafficPortExpDeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.48			A collection of objects used to manage the F3 Ethernet Traffic Port Exp De Decoding/Encoding group function.
f3EthernetTrafficPortExpDEPairEntry	1.3.6.1.4.1.2544.1.12.4.1.102.1		not-accessible	A conceptual row in the f3EthernetTrafficPortExpDEPairEntry.
f3EthernetTrafficPortExpDEPairTable	1.3.6.1.4.1.2544.1.12.4.1.102		not-accessible	Ethernet Traffic Port Exp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the Exp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.
f3FlowPointCpdV2Entry	1.3.6.1.4.1.2544.1.12.4.1.98.1		not-accessible	A conceptual row in the f3FlowPointCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Flow Point.
f3FlowPointCpdV2Table	1.3.6.1.4.1.2544.1.12.4.1.98		not-accessible	A list of entries corresponding to Flow Point Control Protocol Disposition V2.
f3FpQosPolicerEntry	1.3.6.1.4.1.2544.1.12.4.1.96.1		not-accessible	A conceptual row in the f3FpQosPolicerTable. These entries represent an Flow Point Quality of Service Policer.
f3FpQosPolicerGroup	1.3.6.1.4.1.2544.1.12.4.2.2.45			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint Policer.
f3FpQosPolicerTable	1.3.6.1.4.1.2544.1.12.4.1.96		not-accessible	A list of entries corresponding to Flow Point Quality of Service Policer for configuration purposes.
f3FpQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.95.1		not-accessible	A conceptual row in the f3FpQosShaperTable. These entries represent an Flow Point Quality of Service Shaper.
f3FpQosShaperGroup	1.3.6.1.4.1.2544.1.12.4.2.2.44			A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint Shaper.
f3FpQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.95		not-accessible	A list of entries corresponding to Flow Point Quality of Service Shaper for configuration purposes.
f3Gps10MhzPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.18			A collection of objects used to manage the F3 GPS 10 Mhz Port Group.
f3GPSReceiverPortEntry	1.3.6.1.4.1.2544.1.12.4.1.57.1		not-accessible	A conceptual row in the f3GPSReceiverPortTable.
f3GPSReceiverPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.20			A collection of objects used to manage the F3 GPS Receiver Port Group.
f3GPSReceiverPortTable	1.3.6.1.4.1.2544.1.12.4.1.57		not-accessible	A list of entries corresponding to the GPS Receiver Port Facilities.
f3IrigOpticalOutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.107.1		not-accessible	A conceptual row in the f3IrigOpticalOutputPortTable.
f3IrigOpticalOutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.107		not-accessible	A list of entries corresponding to IRIG Optical output ports.
f3IrigOutputGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.109.1		not-accessible	A conceptual row in the f3IrigOutputGroupTable.
f3IrigOutputGroupTable	1.3.6.1.4.1.2544.1.12.4.1.109		not-accessible	A list of entries corresponding to output groups.
f3IrigOutputUnitPortEntry	1.3.6.1.4.1.2544.1.12.4.1.110.1		not-accessible	A conceptual row in the f3IrigOutputUnitPortTable.
f3IrigOutputUnitPortTable	1.3.6.1.4.1.2544.1.12.4.1.110		not-accessible	A list of entries corresponding to IRIG output unit ports in IRIG output groups for management purposes.
f3IrigPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.52			A collection of objects used to manage IRIG Card and Port.
f3IrigRelayOutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.108.1		not-accessible	A conceptual row in the f3IrigRelayOutputPortTable.
f3IrigRelayOutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.108		not-accessible	A list of entries corresponding to IRIG time relay output ports.
f3IrigRs422OutputPortEntry	1.3.6.1.4.1.2544.1.12.4.1.106.1		not-accessible	A conceptual row in the f3IrigRs422OutputPortTable.
f3IrigRs422OutputPortTable	1.3.6.1.4.1.2544.1.12.4.1.106		not-accessible	A list of entries corresponding to IRIG RS422 output ports.
f3NetPortQosShaperEntry	1.3.6.1.4.1.2544.1.12.4.1.45.1		not-accessible	A conceptual row in the f3NetPortQosShaperTable. These entries represent a Quality of Service Shaper.
f3NetPortQosShaperTable	1.3.6.1.4.1.2544.1.12.4.1.45		not-accessible	A list of entries corresponding to Ethernet Network Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Network Port is in evpl mode and are relevant for traffic in the access to network direction.
f3PolicerEnvelopeEntry	1.3.6.1.4.1.2544.1.12.4.1.82.1		not-accessible	A conceptual row in the f3PolicerEnvelopeTable.
f3PolicerEnvelopeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.38			A collection of objects used to manage the policer envelope group function.
f3PolicerEnvelopeTable	1.3.6.1.4.1.2544.1.12.4.1.82		not-accessible	A list of entries corresponding to policer envelope for configuration purposes.
f3PulsePerSecondPortEntry	1.3.6.1.4.1.2544.1.12.4.1.53.1		not-accessible	A conceptual row in the f3PulsePerSecondPortTable.
f3PulsePerSecondPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.16			A collection of objects used to manage the F3 Pulse Per Second Group.
f3PulsePerSecondPortTable	1.3.6.1.4.1.2544.1.12.4.1.53		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
f3SatelliteEntry	1.3.6.1.4.1.2544.1.12.4.1.93.1		not-accessible	A conceptual row in the f3SatelliteTable Entries can be created/deleted in this table by management application action.
f3SatelliteGroup	1.3.6.1.4.1.2544.1.12.4.2.2.42			A collection of objects used to manage the GNSS satellite group function.
f3SatelliteTable	1.3.6.1.4.1.2544.1.12.4.1.93		not-accessible	A list of GNSS Satellite entries on the NIDs.
f3TimeOfDayPortEntry	1.3.6.1.4.1.2544.1.12.4.1.55.1		not-accessible	A conceptual row in the f3TimeOfDayPortTable.
f3TimeOfDayPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.17			A collection of objects used to manage the F3 Time of Day Port Group.
f3TimeOfDayPortTable	1.3.6.1.4.1.2544.1.12.4.1.55		not-accessible	A list of entries corresponding to Time Of Day Port Facilities.
f3Usb3GDCNPortEntry	1.3.6.1.4.1.2544.1.12.4.1.46.1		not-accessible	A conceptual row in the f3Usb3GDCNPortTable.
f3Usb3GDCNPortTable	1.3.6.1.4.1.2544.1.12.4.1.46		not-accessible	3G DCN Port table. The table contains parameters of 3G USB modem.
f3UsbWIFIDonglePortEntry	1.3.6.1.4.1.2544.1.12.4.1.77.1		not-accessible	A conceptual row in the f3UsbWIFIDonglePortTable.
f3UsbWIFIDonglePortTable	1.3.6.1.4.1.2544.1.12.4.1.77		not-accessible	A list of entries corresponding to wifi dongle Port for configuration purposes.
f3XdslAndPpppoeParamGroup	1.3.6.1.4.1.2544.1.12.4.2.2.49			A collection of objects used to manage the F3 Ethernet Traffic Port XDSL Parameter.
gps10MHzPortEntry	1.3.6.1.4.1.2544.1.12.4.1.18.1		not-accessible	A conceptual row in the GPS 10MHz Port Table.
gps10MHzPortTable	1.3.6.1.4.1.2544.1.12.4.1.18		not-accessible	A list of entries corresponding to GPS 10MHz Facilities for configuration purposes.
ieee1588EthernetPortEntry	1.3.6.1.4.1.2544.1.12.4.1.17.1		not-accessible	A conceptual row in the IEEE Ethernet Port Table.
ieee1588EthernetPortTable	1.3.6.1.4.1.2544.1.12.4.1.17		not-accessible	A list of entries corresponding to IEEE Ethernet Port Facilities for configuration purposes.
neTMParamsGroup	1.3.6.1.4.1.2544.1.12.4.2.2.26			A collection of objects used to manage the ne facility entry Group.
networkElementTMParamsEntry	1.3.6.1.4.1.2544.1.12.4.1.66.1		not-accessible	A conceptual row in the networkElementTMParamsTable.
networkElementTMParamsTable	1.3.6.1.4.1.2544.1.12.4.1.66		not-accessible	Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table.
ocnStmEntry	1.3.6.1.4.1.2544.1.12.4.1.47.1		not-accessible	A conceptual row in the ocnStmTable.
ocnStmGroup	1.3.6.1.4.1.2544.1.12.4.2.2.11			A collection of objects used to manage the OCN/STM Line.
ocnStmTable	1.3.6.1.4.1.2544.1.12.4.1.47		not-accessible	A list of entries corresponding to OCn/STM interface.
pcpEncodeGroup	1.3.6.1.4.1.2544.1.12.4.2.2.8			A collection of objects used to manage the F3 Priority Mapping function.
pethMainPseEXTEntry	1.3.6.1.4.1.2544.1.12.4.1.59.1		not-accessible	A conceptual row in the pethMainPseEXTEntry.
pethMainPseEXTTable	1.3.6.1.4.1.2544.1.12.4.1.59		not-accessible	A list of entries corresponding to PethMainPseEXTEntry.
pps16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.79.1		not-accessible	A conceptual row in the pps16PortGroupTable.
pps16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.35			A collection of objects used to manage the Pps 16 port card Group function.
pps16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.79		not-accessible	A list of entries corresponding to Pulse Per Second Port Facilities.
prioMapGroup	1.3.6.1.4.1.2544.1.12.4.2.2.7			A collection of objects used to manage the F3 Priority Mapping function.
sciPortEntry	1.3.6.1.4.1.2544.1.12.4.1.105.1		not-accessible	A conceptual row in the sciPortTable.
sciPortGroup	1.3.6.1.4.1.2544.1.12.4.2.2.50			A collection of objects used to manage the SCI port.
sciPortTable	1.3.6.1.4.1.2544.1.12.4.1.105		not-accessible	A list of entries corresponding to SCI Port Facilities for configuration purposes.
stsVcPathEntry	1.3.6.1.4.1.2544.1.12.4.1.48.1		not-accessible	A conceptual row in the stsVcPathTable.
stsVcPathGroup	1.3.6.1.4.1.2544.1.12.4.2.2.12			A collection of objects used to manage the STS/VC Higher Order Path.
stsVcPathTable	1.3.6.1.4.1.2544.1.12.4.1.48		not-accessible	A list of entries corresponding to OCn Path.
todPps16PortGroupEntry	1.3.6.1.4.1.2544.1.12.4.1.81.1		not-accessible	A conceptual row in the todPps16PortGroupTable.
todPps16PortGroupGroup	1.3.6.1.4.1.2544.1.12.4.2.2.37			A collection of objects used to manage the TOD and PPS 16 port card Group function.
todPps16PortGroupTable	1.3.6.1.4.1.2544.1.12.4.1.81		not-accessible	A list of entries corresponding to Time Of Day Port Facilities.
trafficGroup	1.3.6.1.4.1.2544.1.12.4.2.2.6			A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers.
trafficGroupCmHub	1.3.6.1.4.1.2544.1.12.4.2.2.10			A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers.
vtVcPathEntry	1.3.6.1.4.1.2544.1.12.4.1.49.1		not-accessible	A conceptual row in the vtVcPathTable.
vtVcPathGroup	1.3.6.1.4.1.2544.1.12.4.2.2.13			A collection of objects used to manage the VT/VC Lower Order Path.
vtVcPathTable	1.3.6.1.4.1.2544.1.12.4.1.49		not-accessible	A list of entries corresponding to VT1.5/VC12. These represent the lower order path (LOP) entities.

RFC description

Vendor-private MIB for cable modem facility and resource management on cable access networks.

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CM-FACILITY-MIB

This MIB depends on

Related MIBs

What Is CM-FACILITY-MIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description