All MIBs › CM-FACILITY-MIB › cmEthernetTrafficPortJDSULoopbackVlan
cmEthernetTrafficPortJDSULoopbackVlan
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetTrafficPortJDSULoopbackVlan
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.94.1.2
Node type: OBJECT-TYPE
Type: VlanId
Access: read-only
Description:
Applicable when port in JDSU VLAN loopback.
What is cmEthernetTrafficPortJDSULoopbackVlan?
This OID holds a VLAN ID number (1-4094) that identifies which virtual local area network the port is currently looped back to. When a port enters JDSU loopback mode (a hardware test state), this tells you which VLAN that loopback test is using. A network technician would check this value while running hardware diagnostics on a JDSU optical interface to confirm the test traffic is isolated on the correct VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.94.1.2 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortJDSULoopbackVlan
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.94.1.2.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortJDSULoopbackVlan.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.94 | cmEthernetTrafficPortJdsuExtTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.94.1 | cmEthernetTrafficPortJdsuExtEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.94.1.2 | cmEthernetTrafficPortJDSULoopbackVlan | CM-FACILITY-MIB |