CM-FACILITY-MIB :: cmFlowPointEgressShapingType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-FACILITY-MIBcmFlowPointEgressShapingType

cmFlowPointEgressShapingType

Module: CM-FACILITY-MIB

OID (symbolic): CM-FACILITY-MIB::cmFlowPointEgressShapingType

OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.29.1.45

Node type: OBJECT-TYPE

Type: ShapingType

Access: read-write

Description: This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.

What is cmFlowPointEgressShapingType?

This read-write object specifies the egress shaping type applied to this FlowPoint's outbound traffic, controlling how the flow's rate is smoothed before leaving the device; as of the 8.1.1 release only flow-based shaping is supported. An administrator sets this to select the shaping method used to enforce this flow's bandwidth contract on egress. For example, since only flow-based shaping is currently supported, an administrator configuring a new flow point on 8.1.1 firmware would leave or set this to the flow-based option rather than attempting an unsupported shaping type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.29.1.45
snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmFlowPointEgressShapingType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.29.1.45.1
snmpget -v2c -c public <target> CM-FACILITY-MIB::cmFlowPointEgressShapingType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.29.1.45.1 s <value>

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmFlowPointEgressShapingType OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.4cmFacilityMIBCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1cmFacilityObjectsCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.29cmFlowPointTableCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.29.1cmFlowPointEntryCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.29.1.45cmFlowPointEgressShapingTypeCM-FACILITY-MIB