CM-FACILITY-MIB :: f3FpQosPolicerCIRMaxLo

MIB Reference — IPNetwork Monitor

All MIBsCM-FACILITY-MIBf3FpQosPolicerCIRMaxLo

f3FpQosPolicerCIRMaxLo

Module: CM-FACILITY-MIB

OID (symbolic): CM-FACILITY-MIB::f3FpQosPolicerCIRMaxLo

OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.96.1.18

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description:

This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.

What is f3FpQosPolicerCIRMaxLo?

This object represents the lower 32 bits of the maximum Committed Information Rate (CIR) setting on a QoS traffic policer, specifying the guaranteed minimum bandwidth that a connection must not exceed. The CIR is split into two 32-bit fields for 64-bit precision in setting bandwidth limits. Operators adjust this when enforcing service-level agreements to prevent traffic from consuming more than contracted bandwidth.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.96.1.18
snmpwalk -v2c -c public <target> CM-FACILITY-MIB::f3FpQosPolicerCIRMaxLo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.96.1.18.1
snmpget -v2c -c public <target> CM-FACILITY-MIB::f3FpQosPolicerCIRMaxLo.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.96.1.18.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
1.3.6.1.4.1.2544.1.12.4cmFacilityMIBCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1cmFacilityObjectsCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.96f3FpQosPolicerTableCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.96.1f3FpQosPolicerEntryCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.96.1.18f3FpQosPolicerCIRMaxLoCM-FACILITY-MIB