All MIBs › CM-FACILITY-MIB › cmEthernetAccPortInnerVlanLoopback3
cmEthernetAccPortInnerVlanLoopback3
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetAccPortInnerVlanLoopback3
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.1.1.40
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.1.1.40 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetAccPortInnerVlanLoopback3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.1.1.40.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetAccPortInnerVlanLoopback3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.1.1.40.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.1 | cmEthernetAccPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1 | cmEthernetAccPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.40 | cmEthernetAccPortInnerVlanLoopback3 | CM-FACILITY-MIB |