CM-FACILITY-MIB :: cmFlowPointMcastRateLimitSpeedLo

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-FACILITY-MIBcmFlowPointMcastRateLimitSpeedLo

cmFlowPointMcastRateLimitSpeedLo

Module: CM-FACILITY-MIB

OID (symbolic): CM-FACILITY-MIB::cmFlowPointMcastRateLimitSpeedLo

OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.29.1.27

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped.

This objects only represents low 32 bits.

What is cmFlowPointMcastRateLimitSpeedLo?

This read-write object holds the lower 32 bits of the multicast rate-limit speed for this FlowPoint, and if cmFlowPointMcastRateLimitEnabled is on with this value set to 0, all multicast frames on the flow are dropped entirely. An administrator sets this value to cap multicast bandwidth to a specific rate, or intentionally to zero to block multicast traffic on that flow altogether. For example, setting this to 0 on a flow point where multicast service is not purchased effectively blocks any multicast traffic that customer might inject.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.29.1.27
snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmFlowPointMcastRateLimitSpeedLo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.29.1.27.1
snmpget -v2c -c public <target> CM-FACILITY-MIB::cmFlowPointMcastRateLimitSpeedLo.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.29.1.27.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cmFlowPointMcastRateLimitSpeedLo.1

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmFlowPointMcastRateLimitSpeedLo OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.4cmFacilityMIBCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1cmFacilityObjectsCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.29cmFlowPointTableCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.29.1cmFlowPointEntryCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.29.1.27cmFlowPointMcastRateLimitSpeedLoCM-FACILITY-MIB