CM-FACILITY-MIB :: cmQosFlowPolicerEIRLo

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-FACILITY-MIBcmQosFlowPolicerEIRLo

cmQosFlowPolicerEIRLo

Module: CM-FACILITY-MIB

OID (symbolic): CM-FACILITY-MIB::cmQosFlowPolicerEIRLo

OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.11.1.9

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR.

What is cmQosFlowPolicerEIRLo?

This read-create Unsigned32 holds the lower 32 bits of the Excess Information Rate (EIR) on a QoS Flow Policer, the additional burst-above-CIR rate that gets marked out-of-profile ('yellow') rather than immediately dropped. Admins configure this to control how much above-committed traffic a customer is allowed to burst through the policer before frames start being discarded outright. For example, allowing a customer's uplink policer to accept an extra 5 Mbps of best-effort burst above their committed rate, an admin would set cmQosFlowPolicerEIRLo to represent that 5 Mbps excess allowance.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.4cmFacilityMIBCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1cmFacilityObjectsCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.11cmQosFlowPolicerTableCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.11.1cmQosFlowPolicerEntryCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.11.1.9cmQosFlowPolicerEIRLoCM-FACILITY-MIB