All MIBs › CM-FACILITY-MIB › cmEthernetNetPortJDSUControlFramesSnoopingEnabled
cmEthernetNetPortJDSUControlFramesSnoopingEnabled
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetNetPortJDSUControlFramesSnoopingEnabled
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.68.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state.
What is cmEthernetNetPortJDSUControlFramesSnoopingEnabled?
This read-write boolean object enables or disables the device's ability to intercept and respond to JDSU (optical test equipment vendor) in-band loopback and hello control frames sent over an Ethernet port. When enabled, the device will react to these test commands; when disabled, the device forwards JDSU frames to the processor without filtering. Field technicians use this to enable automatic loopback testing and diagnostics when connecting JDSU test equipment to Ethernet ports for troubleshooting optical circuits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.68.1.1 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortJDSUControlFramesSnoopingEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.68.1.1.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortJDSUControlFramesSnoopingEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.68.1.1.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetNetPortJDSUControlFramesSnoopingEnabled OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.68 | cmEthernetNetPortJdsuExtTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.68.1 | cmEthernetNetPortJdsuExtEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.68.1.1 | cmEthernetNetPortJDSUControlFramesSnoopingEnabled | CM-FACILITY-MIB |