All MIBs › CM-FACILITY-MIB › cmEthernetNetPortOuterVlanLoopback3
cmEthernetNetPortOuterVlanLoopback3
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetNetPortOuterVlanLoopback3
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.7.1.36
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
What is cmEthernetNetPortOuterVlanLoopback3?
This read-write DisplayString (0..6 chars) specifies, in the form X-Y, which outer VLAN 3 traffic to loop back on an Ethernet Network Port, valid only when the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. It gives an admin a third independent VLAN loopback slot so up to three separate customer VLANs on the same physical port can each be tested without affecting the others. For example, setting cmEthernetNetPortOuterVlanLoopback3 to '310-*' loops back all priorities of outer VLAN 310 while VLANs handled by the Loopback2 and mask-selected first VLAN slot remain configured independently.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.36 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortOuterVlanLoopback3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.36.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortOuterVlanLoopback3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.36.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetNetPortOuterVlanLoopback3 OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.7 | cmEthernetNetPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1 | cmEthernetNetPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.36 | cmEthernetNetPortOuterVlanLoopback3 | CM-FACILITY-MIB |