All MIBs › CM-FACILITY-MIB › cmEthernetTrafficPortQLModeEnabled
cmEthernetTrafficPortQLModeEnabled
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetTrafficPortQLModeEnabled
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.27.1.75
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object allows to specify whether the Ethernet Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs.
What is cmEthernetTrafficPortQLModeEnabled?
This TruthValue enables or disables Quality Level (QL) Mode on a Synchronous Ethernet capable port, which governs whether the port peers Synchronization Status Message (SSM) slow-protocol PDUs on receive and periodically transmits them. An administrator cares because turning this on makes the port actively participate in SyncE clock-quality signaling used to keep network timing synchronized across carrier equipment. For example, enabling QL Mode on a SyncE uplink port causes it to both listen for incoming SSM quality-level advertisements and send its own out toward the connected device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.75 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortQLModeEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.75.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortQLModeEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.75.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetTrafficPortQLModeEnabled OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27 | cmEthernetTrafficPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1 | cmEthernetTrafficPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.75 | cmEthernetTrafficPortQLModeEnabled | CM-FACILITY-MIB |