ADVA-FSPR7-MODULE-ENCRYPTION-MIB

All MIBs › ADVA-FSPR7-MODULE-ENCRYPTION-MIB

Organization: ADVA Optical Networking

Last Updated: 2013-08-20

Category: Optical and WDM, Vendor: ADVA Optical

Description: Manages optical layer encryption module configuration and key management on the ADVA Optical Networking FSP R7 platform.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ADVA-FSPR7-MODULE-ENCRYPTION-MIB?

ADVA-FSPR7-MODULE-ENCRYPTION-MIB is a vendor-specific MIB for the ADVA Optical Networking FSP 3000 R7 (FSPR7) optical transport platform, covering configuration and management of optical-layer encryption modules and their cryptographic officer access controls. It exposes objects for crypto officer password management, per-module configuration including firmware update state/version and self-test operation, and module/port encryption status tables. Its monitoring value spans both software and hardware status: cryptoModuleConfigFirmwareVersion and cryptoModuleConfigFirmwareUpdateState track software state of the encryption module, cryptoModuleConfigSelfTestOperation reflects hardware self-test/health status, and cryptoModuleConfigResetToFactory reveals configuration-reset events, together giving a picture of the encryption module's operational and security state. It is a proprietary module built on ADVA's FSP R7 platform architecture and likely depends on other ADVA FSPR7 chassis/module inventory MIBs for slot/module identification. It is deployed in service-provider and enterprise optical transport networks using ADVA FSP 3000 R7 platforms that require in-line optical data encryption, where ADVA-FSPR7-MODULE-ENCRYPTION-MIB SNMP monitoring verifies firmware state and self-test health on each encryption module.

IPNetwork Monitor allows you to monitor SNMP objects defined in ADVA-FSPR7-MODULE-ENCRYPTION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP 3000 R7 optical transport platform

Monitoring Examples

A security operator would poll cryptoModuleConfigFirmwareVersion and cryptoModuleConfigFirmwareUpdateState from cryptoModuleConfigTable (indexed by cryptoModuleConfigIndex) to confirm an encryption module is running current, fully-updated firmware before a security audit. Checking cryptoModuleConfigSelfTestOperation reveals whether the module's cryptographic self-test passed, and cryptoOfficerPasswordError would flag repeated failed crypto-officer login attempts, potentially indicating an unauthorized access attempt on the encryption subsystem.

What Can Be Monitored

encryption module firmware version/update state
module self-test status
crypto officer password error
factory reset status
port encryption status

Imported Objects

From ADVA-FSPR7-MIB

entityEqptClassName	OBJECT-TYPE
entityEqptExtNo	OBJECT-TYPE
entityEqptPortNo	OBJECT-TYPE
entityEqptShelfNo	OBJECT-TYPE
entityEqptSlotNo	OBJECT-TYPE
entityFacilityClassName	OBJECT-TYPE
entityFacilityExtNo	OBJECT-TYPE
entityFacilityPortNo	OBJECT-TYPE
entityFacilityShelfNo	OBJECT-TYPE
entityFacilitySlotNo	OBJECT-TYPE

From ADVA-MIB

EntityIndex
entityIndex	OBJECT-TYPE
fspR7	OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 cryFacilityCurrent15minElapsedTime	1.3.6.1.4.1.2544.1.11.5.1.4.10.1.4	Integer32	read-only	Elapsed 15Min
U32 cryFacilityCurrent15minEncryptionRunDegradeSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.10.1.3	Unsigned32	read-only	Encryption in degrade mode seconds
U32 cryFacilityCurrent15minEncryptionRunErrorSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.10.1.2	Unsigned32	read-only	Encryption Errored Seconds
U32 cryFacilityCurrent15minEncryptionRunSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.10.1.1	Unsigned32	read-only	Encryption running seconds
cryFacilityCurrent15minEntry	1.3.6.1.4.1.2544.1.11.5.1.4.10.1		not-accessible	Every row of this table represents performance monitoring entry.
cryFacilityCurrent15minTable	1.3.6.1.4.1.2544.1.11.5.1.4.10		not-accessible	This table contains current encryption-related performance monitoring 15-min values related to channel ports.
I32 cryFacilityCurrent1dayElapsedTime	1.3.6.1.4.1.2544.1.11.5.1.4.11.1.4	Integer32	read-only	Elapsed 1Day
U32 cryFacilityCurrent1dayEncryptionRunDegradeSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.11.1.3	Unsigned32	read-only	Encryption in degrade mode seconds
U32 cryFacilityCurrent1dayEncryptionRunErrorSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.11.1.2	Unsigned32	read-only	Encryption Errored Seconds
U32 cryFacilityCurrent1dayEncryptionRunSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.11.1.1	Unsigned32	read-only	Encryption running seconds
cryFacilityCurrent1dayEntry	1.3.6.1.4.1.2544.1.11.5.1.4.11.1		not-accessible	Every row of this table represents performance monitoring entry.
cryFacilityCurrent1dayTable	1.3.6.1.4.1.2544.1.11.5.1.4.11		not-accessible	This table contains current encryption-related performance monitoring 1-day values related to channel ports.
U32 cryFacilityHistorical15minEncryptionRunDegradeSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.12.1.4	Unsigned32	read-only	Informs about degraded time period (seconds) during encryption mode.
U32 cryFacilityHistorical15minEncryptionRunErrorSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.12.1.3	Unsigned32	read-only	Informs about errorous time period (seconds) during encryption mode.
U32 cryFacilityHistorical15minEncryptionRunSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.12.1.2	Unsigned32	read-only	Informs about time period (seconds) during encryption mode.
cryFacilityHistorical15minEntry	1.3.6.1.4.1.2544.1.11.5.1.4.12.1		not-accessible	Every row of this table represents performance monitoring entry.
I32 cryFacilityHistorical15minNumber	1.3.6.1.4.1.2544.1.11.5.1.4.12.1.1	Integer32	not-accessible	A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
cryFacilityHistorical15minTable	1.3.6.1.4.1.2544.1.11.5.1.4.12		not-accessible	This table contains historical encryption-related performance monitoring 15-min values related to channel ports.
DAT cryFacilityHistorical15minTimeStamp	1.3.6.1.4.1.2544.1.11.5.1.4.12.1.6	DateAndTime	read-only	Timestamp
T/F cryFacilityHistorical15minValidFlag	1.3.6.1.4.1.2544.1.11.5.1.4.12.1.5	TruthValue	read-only	Valid Flag
U32 cryFacilityHistorical1dayEncryptionRunDegradeSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.13.1.4	Unsigned32	read-only	Informs about degraded time period (seconds) during encryption mode.
U32 cryFacilityHistorical1dayEncryptionRunErrorSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.13.1.3	Unsigned32	read-only	Informs about errorous time period (seconds) during encryption mode.
U32 cryFacilityHistorical1dayEncryptionRunSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.13.1.2	Unsigned32	read-only	Informs about time period (seconds) during encryption mode.
cryFacilityHistorical1dayEntry	1.3.6.1.4.1.2544.1.11.5.1.4.13.1		not-accessible	Every row of this table represents performance monitoring entry.
I32 cryFacilityHistorical1dayNumber	1.3.6.1.4.1.2544.1.11.5.1.4.13.1.1	Integer32	not-accessible	A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interval.
cryFacilityHistorical1dayTable	1.3.6.1.4.1.2544.1.11.5.1.4.13		not-accessible	This table contains historical encryption-related performance monitoring 1-day values related to channel ports.
DAT cryFacilityHistorical1dayTimeStamp	1.3.6.1.4.1.2544.1.11.5.1.4.13.1.6	DateAndTime	read-only	Timestamp
T/F cryFacilityHistorical1dayValidFlag	1.3.6.1.4.1.2544.1.11.5.1.4.13.1.5	TruthValue	read-only	Valid Flag
I32 cryptoModuleCapCryptoOfficerPassword	1.3.6.1.4.1.2544.1.11.5.1.2.21.1.1	Integer32	read-only	The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error.
cryptoModuleCapEntry	1.3.6.1.4.1.2544.1.11.5.1.2.21.1		not-accessible	Every row of this table represents an encryption-capable module.
CRY cryptoModuleCapFirmwareUpdateState	1.3.6.1.4.1.2544.1.11.5.1.2.21.1.3	CryptoFspR7EnableDisableCaps	read-only	Determines if it is allowed for a module to perform firmware upgrade.
I32 cryptoModuleCapFirmwareVersion	1.3.6.1.4.1.2544.1.11.5.1.2.21.1.4	Integer32	read-only	Firmware package version designated for an upgrade.
CRY cryptoModuleCapResetToFactory	1.3.6.1.4.1.2544.1.11.5.1.2.21.1.2	CryptoFspR7EncryptionResetCaps	read-only	Executes 'reset to factory' action.
CRY cryptoModuleCapSelfTestOperation	1.3.6.1.4.1.2544.1.11.5.1.2.21.1.5	CryptoFspR7SelfTestOperationCaps	read-only	Starts self-tests.
cryptoModuleCapTable	1.3.6.1.4.1.2544.1.11.5.1.2.21		not-accessible	This table contains encryption-related parameters defined per module.
STR cryptoModuleConfigCryptoOfficerPassword	1.3.6.1.4.1.2544.1.11.5.1.2.10.1.2	SnmpAdminString	read-write	The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error.
cryptoModuleConfigEntry	1.3.6.1.4.1.2544.1.11.5.1.2.10.1		not-accessible	Every row of this table represents an encryption-capable module.
CRY cryptoModuleConfigFirmwareUpdateState	1.3.6.1.4.1.2544.1.11.5.1.2.10.1.4	CryptoFspR7EnableDisable	read-write	Determines if it is allowed for a module to perform firmware upgrade.
STR cryptoModuleConfigFirmwareVersion	1.3.6.1.4.1.2544.1.11.5.1.2.10.1.5	SnmpAdminString	read-write	Firmware package version designated for an upgrade.
ENT cryptoModuleConfigIndex	1.3.6.1.4.1.2544.1.11.5.1.2.10.1.1	EntityIndex	not-accessible	Address of an encryption capable module.
CRY cryptoModuleConfigResetToFactory	1.3.6.1.4.1.2544.1.11.5.1.2.10.1.3	CryptoFspR7EncryptionReset	read-write	Executes 'reset to factory' action.
CRY cryptoModuleConfigSelfTestOperation	1.3.6.1.4.1.2544.1.11.5.1.2.10.1.6	CryptoFspR7SelfTestOperation	read-write	Starts self-tests.
cryptoModuleConfigTable	1.3.6.1.4.1.2544.1.11.5.1.2.10		not-accessible	This table contains encryption-related writeable parameters defined per module.
STR cryptoModuleCryptoOfficerPassword	1.3.6.1.4.1.2544.1.11.5.1.2.20.1.1	SnmpAdminString	read-write	The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error.
cryptoModuleEntry	1.3.6.1.4.1.2544.1.11.5.1.2.20.1		not-accessible	Every row of this table represents an encryption-capable module.
U32 cryptoModuleFailureLoginCount	1.3.6.1.4.1.2544.1.11.5.1.2.20.1.6	Unsigned32	read-only	Number of unsuccessful Crypto Officer log-in attempts.
CRY cryptoModuleFirmwareUpdateState	1.3.6.1.4.1.2544.1.11.5.1.2.20.1.3	CryptoFspR7EnableDisable	read-write	Determines if it is allowed for a module to perform firmware upgrade.
STR cryptoModuleFirmwareVersion	1.3.6.1.4.1.2544.1.11.5.1.2.20.1.4	SnmpAdminString	read-write	Firmware package version designated for an upgrade.
CRY cryptoModuleResetToFactory	1.3.6.1.4.1.2544.1.11.5.1.2.20.1.2	CryptoFspR7EncryptionReset	read-write	Executes 'reset to factory' action.
CRY cryptoModuleSelfTestOperation	1.3.6.1.4.1.2544.1.11.5.1.2.20.1.5	CryptoFspR7SelfTestOperation	read-write	Starts self-tests.
cryptoModuleStatusEntry	1.3.6.1.4.1.2544.1.11.5.1.2.11.1		not-accessible	Every row of this table represents an encryption-capable module.
U32 cryptoModuleStatusFailureLoginCount	1.3.6.1.4.1.2544.1.11.5.1.2.11.1.2	Unsigned32	read-only	Number of unsuccessful Crypto Officer log-in attempts.
ENT cryptoModuleStatusIndex	1.3.6.1.4.1.2544.1.11.5.1.2.11.1.1	EntityIndex	not-accessible	Address of an encryption capable module.
CRY cryptoModuleStatusResetToFactoryCapability	1.3.6.1.4.1.2544.1.11.5.1.2.11.1.5	CryptoFspR7EnableDisable	read-only	The status of possibility to perform Reset To Factory operation. If disable(2) then cryptoModuleConfigResetToFactory cannot be used, otherwise operation will fail.
DAT cryptoModuleStatusSuccessfulLoginDateAndTime	1.3.6.1.4.1.2544.1.11.5.1.2.11.1.3	DateAndTime	read-only	The date and time of a last successful Crypto Officer login.
cryptoModuleStatusTable	1.3.6.1.4.1.2544.1.11.5.1.2.11		not-accessible	This table contains encryption-related readable parameters defined per module.
DAT cryptoModuleStatusUnsuccessfulLoginDateAndTime	1.3.6.1.4.1.2544.1.11.5.1.2.11.1.4	DateAndTime	read-only	The date and time of a last unsuccessful Crypto Officer login.
DAT cryptoModuleSuccessfulLoginDateAndTime	1.3.6.1.4.1.2544.1.11.5.1.2.20.1.7	DateAndTime	read-only	The date and time of a last successful Crypto Officer login.
cryptoModuleTable	1.3.6.1.4.1.2544.1.11.5.1.2.20		not-accessible	This table contains encryption-related parameters defined per module.
DAT cryptoModuleUnsuccessfulLoginDateAndTime	1.3.6.1.4.1.2544.1.11.5.1.2.20.1.8	DateAndTime	read-only	The date and time of a last unsuccessful Crypto Officer login.
STR cryptoOfficerPassword	1.3.6.1.4.1.2544.1.11.5.1.2.1	SnmpAdminString	read-write	This object must be present in every set-request regarding encryption functionality.
INT cryptoOfficerPasswordError	1.3.6.1.4.1.2544.1.11.5.1.2.2	INTEGER	read-only	Last error related to set-request perform on that table.
U32 cryptoOfficerPasswordReqId	1.3.6.1.4.1.2544.1.11.5.1.2.3	Unsigned32	read-only	Set-Request id for which cryptoOfficerPasswordError contains value.
STR cryptoPortAuthKey	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.1	SnmpAdminString	read-write	Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will fail with noSuchName error.
CRY cryptoPortAuthKeyLifeTime	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.2	CryptoFspR7SessionKeyLifetime	read-write	Determines a life period of an introduced authentication key for a traffic encryption.
U32 cryptoPortAuthKeyLifeTimeRemaining	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.11	Unsigned32	read-only	Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting.
I32 cryptoPortCapAuthKey	1.3.6.1.4.1.2544.1.11.5.1.3.21.1.1	Integer32	read-only	Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will fail with noSuchName error.
CRY cryptoPortCapAuthKeyLifeTime	1.3.6.1.4.1.2544.1.11.5.1.3.21.1.2	CryptoFspR7SessionKeyLifetimeCaps	read-only	Determines a life period of an introduced authentication key for a traffic encryption.
CRY cryptoPortCapEncryptionOff	1.3.6.1.4.1.2544.1.11.5.1.3.21.1.4	CryptoFspR7EncryptionSwitchCaps	read-only	Disable/enable encryption switch.
CRY cryptoPortCapEncryptionOffState	1.3.6.1.4.1.2544.1.11.5.1.3.21.1.3	CryptoFspR7EnableDisableCaps	read-only	Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps.
cryptoPortCapEntry	1.3.6.1.4.1.2544.1.11.5.1.3.21.1		not-accessible	Every row of this table represents an encryption-capable port.
CRY cryptoPortCapForceKeyExchange	1.3.6.1.4.1.2544.1.11.5.1.3.21.1.5	CryptoFspR7ForceKeyExchangeCaps	read-only	Force key exchange.
CRY cryptoPortCapKeyExchangeForcedClear	1.3.6.1.4.1.2544.1.11.5.1.3.21.1.6	CryptoFspR7KeyExchangeForcedClearCaps	read-only	Clears on demand the alarmEncryptionPortKeyExchangeForced condition.
cryptoPortCapTable	1.3.6.1.4.1.2544.1.11.5.1.3.21		not-accessible	This table contains encryption-related parameters defined per port.
STR cryptoPortConfigAuthKey	1.3.6.1.4.1.2544.1.11.5.1.3.12.1.2	SnmpAdminString	read-write	Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will fail with noSuchName error.
CRY cryptoPortConfigAuthKeyLifeTime	1.3.6.1.4.1.2544.1.11.5.1.3.12.1.3	CryptoFspR7SessionKeyLifetime	read-write	Determines a life period of an introduced authentication key for a traffic encryption.
CRY cryptoPortConfigEncryptionOff	1.3.6.1.4.1.2544.1.11.5.1.3.12.1.5	CryptoFspR7EncryptionSwitch	read-write	Disable/enable encryption switch.
CRY cryptoPortConfigEncryptionOffState	1.3.6.1.4.1.2544.1.11.5.1.3.12.1.4	CryptoFspR7EnableDisable	read-write	Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps.
cryptoPortConfigEntry	1.3.6.1.4.1.2544.1.11.5.1.3.12.1		not-accessible	Every row of this table represents an encryption-capable port.
CRY cryptoPortConfigForceKeyExchange	1.3.6.1.4.1.2544.1.11.5.1.3.12.1.6	CryptoFspR7ForceKeyExchange	read-write	Force key exchange.
ENT cryptoPortConfigIndex	1.3.6.1.4.1.2544.1.11.5.1.3.12.1.1	EntityIndex	not-accessible	Address of an encryption capable port.
CRY cryptoPortConfigKeyExchangeForcedClear	1.3.6.1.4.1.2544.1.11.5.1.3.12.1.7	CryptoFspR7KeyExchangeForcedClear	read-write	Clears on demand the alarmEncryptionPortKeyExchangeForced condition.
cryptoPortConfigTable	1.3.6.1.4.1.2544.1.11.5.1.3.12		not-accessible	This table contains encryption-related writeable parameters defined per port.
CRY cryptoPortEncryptionOff	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.4	CryptoFspR7EncryptionSwitch	read-write	Disable/enable encryption switch.
CRY cryptoPortEncryptionOffState	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.3	CryptoFspR7EnableDisable	read-write	Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps.
U32 cryptoPortEncryptionOffTimeRemaining	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.7	Unsigned32	read-only	Informs about amount of minutes remaining to restore traffic encryption.
cryptoPortEntry	1.3.6.1.4.1.2544.1.11.5.1.3.20.1		not-accessible	Every row of this table represents an encryption-capable port.
U32 cryptoPortFailureKeyExchangeCount	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.8	Unsigned32	read-only	Numbers of unsuccessful encryption key exchanges since the successful one.
CRY cryptoPortForceKeyExchange	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.5	CryptoFspR7ForceKeyExchange	read-write	Force key exchange.
CRY cryptoPortKeyExchangeForcedClear	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.6	CryptoFspR7KeyExchangeForcedClear	read-write	Clears on demand the alarmEncryptionPortKeyExchangeForced condition.
U32 cryptoPortStatusAuthKeyLifeTimeRemaining	1.3.6.1.4.1.2544.1.11.5.1.3.13.1.6	Unsigned32	read-only	Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting.
CRY cryptoPortStatusEncryptionOffCapability	1.3.6.1.4.1.2544.1.11.5.1.3.13.1.7	CryptoFspR7EnableDisable	read-only	Capability for encryption switch.
U32 cryptoPortStatusEncryptionOffTimeRemaining	1.3.6.1.4.1.2544.1.11.5.1.3.13.1.2	Unsigned32	read-only	Informs about amount of minutes remaining to restore traffic encryption.
cryptoPortStatusEntry	1.3.6.1.4.1.2544.1.11.5.1.3.13.1		not-accessible	Every row of this table represents an encryption-capable port.
U32 cryptoPortStatusFailureKeyExchangeCount	1.3.6.1.4.1.2544.1.11.5.1.3.13.1.3	Unsigned32	read-only	Numbers of unsuccessful encryption key exchanges since the successful one.
ENT cryptoPortStatusIndex	1.3.6.1.4.1.2544.1.11.5.1.3.13.1.1	EntityIndex	not-accessible	Address of an encryption capable module.
DAT cryptoPortStatusSuccessfulKeyExchangeDateAndTime	1.3.6.1.4.1.2544.1.11.5.1.3.13.1.4	DateAndTime	read-only	The date and time of a recent successful encryption key exchange.
cryptoPortStatusTable	1.3.6.1.4.1.2544.1.11.5.1.3.13		not-accessible	This table contains encryption-related readable parameters defined per port.
DAT cryptoPortStatusUnsuccessfulKeyExchangeDateAndTime	1.3.6.1.4.1.2544.1.11.5.1.3.13.1.5	DateAndTime	read-only	The date and time of a recent unsuccessful encryption key exchange.
DAT cryptoPortSuccessfulKeyExchangeDateAndTime	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.9	DateAndTime	read-only	The date and time of a recent successful encryption key exchange.
cryptoPortTable	1.3.6.1.4.1.2544.1.11.5.1.3.20		not-accessible	This table contains encryption-related parameters defined per port.
DAT cryptoPortUnsuccessfulKeyExchangeDateAndTime	1.3.6.1.4.1.2544.1.11.5.1.3.20.1.10	DateAndTime	read-only	The date and time of a recent unsuccessful encryption key exchange.
I32 currentEncryptionSublayerPm15minElapsedTime	1.3.6.1.4.1.2544.1.11.5.1.4.3.1.4	Integer32	read-only	Elapsed 15Min
U32 currentEncryptionSublayerPm15minEncryptionRunDegradeSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.3.1.3	Unsigned32	read-only	Encryption in degrade mode seconds
U32 currentEncryptionSublayerPm15minEncryptionRunErrorSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.3.1.2	Unsigned32	read-only	Encryption Errored Seconds
U32 currentEncryptionSublayerPm15minEncryptionRunSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.3.1.1	Unsigned32	read-only	Encryption running seconds
currentEncryptionSublayerPm15minEntry	1.3.6.1.4.1.2544.1.11.5.1.4.3.1		not-accessible	Every row of this table represents performance monitoring entry.
currentEncryptionSublayerPm15minTable	1.3.6.1.4.1.2544.1.11.5.1.4.3		not-accessible	This table contains current encryption-related performance monitoring 15-min values related to channel ports.
I32 currentEncryptionSublayerPm1dayElapsedTime	1.3.6.1.4.1.2544.1.11.5.1.4.4.1.4	Integer32	read-only	Elapsed 1Day
U32 currentEncryptionSublayerPm1dayEncryptionRunDegradeSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.4.1.3	Unsigned32	read-only	Encryption in degrade mode seconds
U32 currentEncryptionSublayerPm1dayEncryptionRunErrorSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.4.1.2	Unsigned32	read-only	Encryption Errored Seconds
U32 currentEncryptionSublayerPm1dayEncryptionRunSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.4.1.1	Unsigned32	read-only	Encryption running seconds
currentEncryptionSublayerPm1dayEntry	1.3.6.1.4.1.2544.1.11.5.1.4.4.1		not-accessible	Every row of this table represents performance monitoring entry.
currentEncryptionSublayerPm1dayTable	1.3.6.1.4.1.2544.1.11.5.1.4.4		not-accessible	This table contains current encryption-related performance monitoring 1-day values related to channel ports.
encryptionMIB	1.3.6.1.4.1.2544.1.11.5.1
encryptionMIBCompliance	1.3.6.1.4.1.2544.1.11.5.1.1.1.1			The compliance statement for entities implementing the ADVA FspR7 Module Encryption MIB.
encryptionMIBCompliances	1.3.6.1.4.1.2544.1.11.5.1.1.1
encryptionMIBConformance	1.3.6.1.4.1.2544.1.11.5.1.1
encryptionMIBGroup	1.3.6.1.4.1.2544.1.11.5.1.1.2.1			A list of objects used for configuration of an encryption functionality on port and module level.
encryptionMIBGroups	1.3.6.1.4.1.2544.1.11.5.1.1.2
encryptionPerformanceMonitoring	1.3.6.1.4.1.2544.1.11.5.1.4
U32 intervalEncryptionSublayerPm15minEncryptionRunDegradeSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.1.1.4	Unsigned32	read-only	Informs about degraded time period (seconds) during encryption mode.
U32 intervalEncryptionSublayerPm15minEncryptionRunErrorSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.1.1.3	Unsigned32	read-only	Informs about errorous time period (seconds) during encryption mode.
U32 intervalEncryptionSublayerPm15minEncryptionRunSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.1.1.2	Unsigned32	read-only	Informs about time period (seconds) during encryption mode.
intervalEncryptionSublayerPm15minEntry	1.3.6.1.4.1.2544.1.11.5.1.4.1.1		not-accessible	Every row of this table represents performance monitoring entry.
I32 intervalEncryptionSublayerPm15minNumber	1.3.6.1.4.1.2544.1.11.5.1.4.1.1.1	Integer32	not-accessible	A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
intervalEncryptionSublayerPm15minTable	1.3.6.1.4.1.2544.1.11.5.1.4.1		not-accessible	This table contains encryption-related performance monitoring 15-min values related to channel ports.
DAT intervalEncryptionSublayerPm15minTimeStamp	1.3.6.1.4.1.2544.1.11.5.1.4.1.1.6	DateAndTime	read-only	Timestamp
T/F intervalEncryptionSublayerPm15minValidFlag	1.3.6.1.4.1.2544.1.11.5.1.4.1.1.5	TruthValue	read-only	Valid Flag
U32 intervalEncryptionSublayerPm1dayEncryptionRunDegradeSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.2.1.4	Unsigned32	read-only	Informs about degraded time period (seconds) during encryption mode.
U32 intervalEncryptionSublayerPm1dayEncryptionRunErrorSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.2.1.3	Unsigned32	read-only	Informs about errorous time period (seconds) during encryption mode.
U32 intervalEncryptionSublayerPm1dayEncryptionRunSeconds	1.3.6.1.4.1.2544.1.11.5.1.4.2.1.2	Unsigned32	read-only	Informs about time period (seconds) during encryption mode.
intervalEncryptionSublayerPm1dayEntry	1.3.6.1.4.1.2544.1.11.5.1.4.2.1		not-accessible	Every row of this table represents performance monitoring entry.
I32 intervalEncryptionSublayerPm1dayNumber	1.3.6.1.4.1.2544.1.11.5.1.4.2.1.1	Integer32	not-accessible	A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interval.
intervalEncryptionSublayerPm1dayTable	1.3.6.1.4.1.2544.1.11.5.1.4.2		not-accessible	This table contains interval encryption-related performance monitoring 15-min values related to channel ports.
DAT intervalEncryptionSublayerPm1dayTimeStamp	1.3.6.1.4.1.2544.1.11.5.1.4.2.1.6	DateAndTime	read-only	Timestamp
T/F intervalEncryptionSublayerPm1dayValidFlag	1.3.6.1.4.1.2544.1.11.5.1.4.2.1.5	TruthValue	read-only	Valid Flag
moduleEncryptionMIB	1.3.6.1.4.1.2544.1.11.5			This is a MIB definition for ADVA AG Optical Networking module encryption management.
moduleEncryptionObjects	1.3.6.1.4.1.2544.1.11.5.1.2
portEncryptionObjects	1.3.6.1.4.1.2544.1.11.5.1.3

RFC description

ADVA FSP3000 F7 optical network module encryption management and key handling.

Start monitoring ADVA FSP 3000 R7 optical transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ADVA-FSPR7-MODULE-ENCRYPTION-MIB

What Is ADVA-FSPR7-MODULE-ENCRYPTION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description