CM-FACILITY-MIB :: cmEthernetNetPortCpdV2L2PTTunnelMac

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-FACILITY-MIBcmEthernetNetPortCpdV2L2PTTunnelMac

cmEthernetNetPortCpdV2L2PTTunnelMac

Module: CM-FACILITY-MIB

OID (symbolic): CM-FACILITY-MIB::cmEthernetNetPortCpdV2L2PTTunnelMac

OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.15.1.29

Node type: OBJECT-TYPE

Type: MacAddress

Access: read-write

Description: Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address.

What is cmEthernetNetPortCpdV2L2PTTunnelMac?

cmEthernetNetPortCpdV2L2PTTunnelMac is a read-write MAC address configured on the Ethernet network-facing port that replaces the destination address of STP, CDP, and VTP frames when their disposition is pass-thru-l2pt, and is used together with the protocol signature to recognize those frames again on decapsulation at the far end. Since this is the network-side counterpart to the access-port tunnel MAC, the two need to agree only if this NE is one leg of a matched tunnel pair rather than the tunnel's originating device. For example, a provider edge device tunneling a customer's VTP domain across an MPLS-connected network port would set this address to the value its remote L2PT peer expects on decapsulation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.15.1.29
snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortCpdV2L2PTTunnelMac

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.15.1.29.1
snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortCpdV2L2PTTunnelMac.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.15.1.29.1 s <value>

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetNetPortCpdV2L2PTTunnelMac OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.4cmFacilityMIBCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1cmFacilityObjectsCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.15cmEthernetNetPortCpdV2TableCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.15.1cmEthernetNetPortCpdV2EntryCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.15.1.29cmEthernetNetPortCpdV2L2PTTunnelMacCM-FACILITY-MIB