BMA-MIB

All MIBs › BMA-MIB

Organization: IETF IP Over IB (IPOIB) Working Group

Last Updated: 2005-09-01

Category: Optical and WDM

Description: Monitors BridgeWave millimeter-wave microwave radio link status, signal quality, and throughput.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BMA-MIB?

Despite the short_desc label, the module_desc reveals this MIB actually defines managed objects for an InfiniBand Baseboard Management Agent (BMA) as documented in an IETF/IANA-registered RFC, not BridgeWave microwave radios; it belongs to the baseboard/chassis management category for InfiniBand-attached server and switch hardware. It exposes baseboard management identity and security configuration data: the managed unit type, IB Management Link (IBML) support and implementation details, and B-Key (baseboard management access key) values, protection bits, lease periods, and violation counts, plus a module information table. Its monitoring relevance is directly hardware/software status oriented: ibBmaBKeyViolations reveals unauthorized or failed baseboard-management access attempts (a security/health signal), while the module info table reports installed module GUIDs useful for hardware inventory and firmware/module identification. It is an IANA/IETF-registered MIB tied to the InfiniBand Baseboard Management Agent specification, so it depends on the broader InfiniBand management framework rather than a proprietary vendor MIB tree. It is deployed on InfiniBand switches, chassis, and server baseboard management controllers in high-performance computing and data center fabrics. Engineers can download the BMA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BMA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

InfiniBand switch/chassis baseboard management controller
InfiniBand-attached server hardware

Monitoring Examples

An operator would check ibBmaBKeyValue, ibBmaBKeyProtectBit, and ibBmaBKeyLeasePeriod to confirm baseboard management access-key protection is correctly configured, and monitor ibBmaBKeyViolations for a rising count that would indicate repeated unauthorized B-Key access attempts. Walking ibBmaModuleInfoTable/ibBmaModuleInfoEntry (indexed by ibBmaModuleInfoIndex) returns each installed module's ibBmaModInfoModGuid, useful for hardware inventory or detecting an unexpected module swap. ibBmaIsIBMLSupported and ibBmaIBMLImplementation indicate whether the IB Management Link is available on this baseboard, relevant when troubleshooting in-band management connectivity.

What Can Be Monitored

B-Key value and protection bit configuration
B-Key lease period
B-Key access violation count
installed module GUID/inventory
IB Management Link support and implementation

Imported Objects

From IB-TC-MIB

IbDataPort
infinibandMIB	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
ibBmaMIB	1.3.6.1.3.117.5			Copyright (C) The Internet Society (2005). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html. This module contains managed object definitions for the Baseboard Management Agent instrumentation for an InfiniBand Baseboard Management Agent (BMA).
ibBmaObjects	1.3.6.1.3.117.5.1
ibBmaBmuInfo	1.3.6.1.3.117.5.1.1
INT ibBmaBaseboardManagedUnitType	1.3.6.1.3.117.5.1.1.1	INTEGER	read-only	The Baseboard Managed Unit (BMU) that contains the BMA is one of three basic types. If the BMU contains an interface to the InfiniBand Management Link (IB-ML) it is called an IB-Module and returns ibModule(1). If the BMU does not contain the IB-ML, it is called a non-Module and returns nonModule(2). If the BMU is part of a managed chassis and contains the Chassis Management Entity (CME) it will return managedChassis(3).
T/F ibBmaIsIBMLSupported	1.3.6.1.3.117.5.1.1.2	TruthValue	read-only	Flag that indicates whether direct access to IB-ML is supported.
INT ibBmaIBMLImplementation	1.3.6.1.3.117.5.1.1.3	INTEGER	read-only	Indicates whether the IB-ML is a physical or virtual implementation. This object is only meaningful if ibBmaIsIBMLSupported has a value of true(1). If the IB-ML implementation type is not known, the unknown(3) value is returned.
ibBmaBKeyInfo	1.3.6.1.3.117.5.1.2
T/F ibBmaIsBKeyNVRAM	1.3.6.1.3.117.5.1.2.1	TruthValue	read-only	Flag that indicates whether the Baseboard Management key (B_Key) is being stored in NVRAM.
OCT ibBmaBKeyValue	1.3.6.1.3.117.5.1.2.2	OCTET STRING	read-only	The eight-byte Baseboard Management key that is used in all BM MADs sent and received by all valid Baseboard Managers. If the value is all zeroes, B_Key checking is not done by the BMA. Each BMA in a node has one B_Key.
T/F ibBmaBKeyProtectBit	1.3.6.1.3.117.5.1.2.3	TruthValue	read-only	Flag that controls B_Key prototection levels at the BMA. If the ibBmaBKeyValue is zero, no protection is provided for any ibBmaBKeyProtectBit value. If this value is false(2), protection is provided, but any BM can read this BMA's B_Key value (i.e., ibBmaBKeyValue). If this value is true(1), protection is provided depending on the value of the B_Key lease period (ibBmaBKeyLeasePeriod). If the lease period is non-zero, the BMA does not allow anyone to read the B_Key until the lease period has expired. If the lease period is zero, the BMA does not allow the B_Key in the node to be read by other BMs.
I32 ibBmaBKeyLeasePeriod	1.3.6.1.3.117.5.1.2.4	Integer32	read-only	Specifies the timer value of the B_Key lease period (in seconds). The lease period indicates how long the B_Key Protection bit is to remain non-zero after a BMSet(BKeyInfo) MAD that fails the B_Key authentication check is dropped. When the value is 0, the lease period shall never expire (i.e., infinite).
I32 ibBmaBKeyViolations	1.3.6.1.3.117.5.1.2.5	Integer32	read-only	Counts the number of MAD packets that have been received at this node since power-on or reset that have been dropped due to a failed B_Key check. Note, if this counter is not implemented by the node, the value 65535 shall be returned.
ibBmaVpd	1.3.6.1.3.117.5.1.3
ibBmaModuleInfo	1.3.6.1.3.117.5.1.3.1
ibBmaModuleInfoTable	1.3.6.1.3.117.5.1.3.1.1		not-accessible	This table contains objects that describe the Module class and the number of InfiniBand and IB-ML links exiting the Module. Non-Modules can also utilize this information to describe their link and IB-ML connection support.
ibBmaModuleInfoEntry	1.3.6.1.3.117.5.1.3.1.1.1		not-accessible	The column definitions for the Module Info table.
I32 ibBmaModuleInfoIndex	1.3.6.1.3.117.5.1.3.1.1.1.1	Integer32	not-accessible	Index into the Module Info table.
OCT ibBmaModInfoModGuid	1.3.6.1.3.117.5.1.3.1.1.1.2	OCTET STRING	read-only	The GUID (EUI-64 ID) assigned to this module.
INT ibBmaModInfoModType	1.3.6.1.3.117.5.1.3.1.1.1.3	INTEGER	read-only	InfiniBand module type.
INT ibBmaModInfoModClass	1.3.6.1.3.117.5.1.3.1.1.1.4	INTEGER	read-only	InfiniBand module class.
I32 ibBmaModInfoNodeCount	1.3.6.1.3.117.5.1.3.1.1.1.5	Integer32	read-only	Number of InfiniBand nodes on this module with unique NodeGUIDs.
I32 ibBmaModInfoLinkCount	1.3.6.1.3.117.5.1.3.1.1.1.6	Integer32	read-only	Number of InfiniBand links on this module with unique PortGuids (i.e., NodeGUID plus Port Number).
I32 ibBmaModInfoBckplaneLinkCnt	1.3.6.1.3.117.5.1.3.1.1.1.7	Integer32	read-only	Number of InfiniBand links exiting this module through its backplane connectors. If the module is not an InfiniBand module, this count is the number of InfiniBand links that exit the module.
I32 ibBmaModInfoIbmlCount	1.3.6.1.3.117.5.1.3.1.1.1.8	Integer32	read-only	Number of IB-ML interfaces on this module.
I32 ibBmaModInfoBckPlaneIbmlCnt	1.3.6.1.3.117.5.1.3.1.1.1.9	Integer32	read-only	Number of IB-MLs exiting this module through its backplane connectors. If the module is not an InfiniBand module, this count is the number of IB-MLs that exit the module.
OCT ibBmaModInfoModuleSize	1.3.6.1.3.117.5.1.3.1.1.1.10	OCTET STRING	read-only	Eight-byte bit map for the volumetric information for standard form factors (in millimeters).
INT ibBmaModInfoFormFactor	1.3.6.1.3.117.5.1.3.1.1.1.11	INTEGER	read-only	The Module Form Factor.
ibBmaChassisInfo	1.3.6.1.3.117.5.1.3.2
OCT ibBmaChasInfoChassisGuid	1.3.6.1.3.117.5.1.3.2.1	OCTET STRING	read-only	The GUID assigned to this chassis.
I32 ibBmaChasInfoSlotCount	1.3.6.1.3.117.5.1.3.2.2	Integer32	read-only	Total number of InfiniBand module slots in this chassis.
ibBmaChasInfoSlotTable	1.3.6.1.3.117.5.1.3.2.3		not-accessible	This table contains objects that describe the Chassis and slot-specific information for Chassis VPD accessed from an InfiniBand Module or a CME.
ibBmaChasInfoSlotEntry	1.3.6.1.3.117.5.1.3.2.3.1		not-accessible	The column definitions for the Chassis Info table.
I32 ibBmaChasInfoSlotIndex	1.3.6.1.3.117.5.1.3.2.3.1.1	Integer32	not-accessible	Chassis slot index.
I32 ibBmaChasInfoAssignedSlotNum	1.3.6.1.3.117.5.1.3.2.3.1.2	Integer32	read-only	Slot number assigned to the CME and the Chassis containing the CME. If the slot number is unspecified or occupied by a non-Module, the value returned will be 0xFF(255).
INT ibBmaChasInfoSlotConnStatus	1.3.6.1.3.117.5.1.3.2.3.1.3	INTEGER	read-only	Chassis slot connector status.
INT ibBmaChasInfoCmeAccess	1.3.6.1.3.117.5.1.3.2.3.1.4	INTEGER	read-only	Chassis CME access.
INT ibBmaChasInfoProxyAccess	1.3.6.1.3.117.5.1.3.2.3.1.5	INTEGER	read-only	Chassis proxy access.
INT ibBmaChasInfoLockDrivesCtr	1.3.6.1.3.117.5.1.3.2.3.1.6	INTEGER	read-only	Indicates whether the lock (if present) keeps CME_CTR deasserted until the lock is released. The value lockDrivesCmeCtr(2) is used if the CME uses only the state of the lock to drive the CME_CTR. The value of lockReleaseFromCmeCtr(3) indicates that the CME_CTR will not be asserted unless the lock is released. Also, the CME has other criteria that can also cause the CME_CTR to be kept deasserted.
INT ibBmaChasInfoMechLockPresent	1.3.6.1.3.117.5.1.3.2.3.1.7	INTEGER	read-only	Indicates whether there is a mechnical lock associated with this slot. A mechnical lock physically prevents the removal of the Module from the slot. The implementation can be mechnical or electro-mechanical.
ibBmaFruInfo	1.3.6.1.3.117.5.1.3.3
ibBmaFruInfoTable	1.3.6.1.3.117.5.1.3.3.1		not-accessible	This table contains objects that describe the FRU records present in the managed device.
ibBmaFruInfoEntry	1.3.6.1.3.117.5.1.3.3.1.1		not-accessible	The column definitions for the FRU Info table.
I32 ibBmaFruInfoIndex	1.3.6.1.3.117.5.1.3.3.1.1.1	Integer32	not-accessible	FRU Info index.
INT ibBmaFruInfoType	1.3.6.1.3.117.5.1.3.3.1.1.2	INTEGER	read-only	The Field Replaceable Unit (FRU) type.
INT ibBmaFruInfoGuidType	1.3.6.1.3.117.5.1.3.3.1.1.3	INTEGER	read-only	The FRU GUID type.
OCT ibBmaFruInfoGuidValue	1.3.6.1.3.117.5.1.3.3.1.1.4	OCTET STRING	read-only	The GUID assigned to this FRU. Needs to hold the longest possible GUID type (guid16(4)).
OCT ibBmaFruInfoSerialNumber	1.3.6.1.3.117.5.1.3.3.1.1.5	OCTET STRING	read-only	The FRU serial number.
OCT ibBmaFruInfoPartNumber	1.3.6.1.3.117.5.1.3.3.1.1.6	OCTET STRING	read-only	The FRU Part Number.
OCT ibBmaFruInfoModelName	1.3.6.1.3.117.5.1.3.3.1.1.7	OCTET STRING	read-only	The model name is assigned by the FRU manufacturer.
OCT ibBmaFruInfoVersion	1.3.6.1.3.117.5.1.3.3.1.1.8	OCTET STRING	read-only	The FRU version is assigned by the FRU manufacturer.
OCT ibBmaFruInfoManufacturerName	1.3.6.1.3.117.5.1.3.3.1.1.9	OCTET STRING	read-only	The FRU Manufacturer Name.
OCT ibBmaFruInfoProductName	1.3.6.1.3.117.5.1.3.3.1.1.10	OCTET STRING	read-only	The FRU Product name.
OCT ibBmaFruInfoManufacturerID	1.3.6.1.3.117.5.1.3.3.1.1.11	OCTET STRING	read-only	The FRU Manufacturer ID.
DAT ibBmaFruInfoManDateAndTime	1.3.6.1.3.117.5.1.3.3.1.1.12	DateAndTime	read-only	Manufacture date and time.
ibBmaPortConnectInfo	1.3.6.1.3.117.5.1.3.4
I32 ibBmaPortConNumConnection	1.3.6.1.3.117.5.1.3.4.1	Integer32	read-only	Number of port connections.
ibBmaPortConnectTable	1.3.6.1.3.117.5.1.3.4.2		not-accessible	This table contains objects that describe the Port Connections present in the managed device.
ibBmaPortConnectEntry	1.3.6.1.3.117.5.1.3.4.2.1		not-accessible	The column definitions for the Port Connection table.
I32 ibBmaPortConnectIndex	1.3.6.1.3.117.5.1.3.4.2.1.1	Integer32	not-accessible	Index for the Port Connection table.
INT ibBmaPortConInternalCon	1.3.6.1.3.117.5.1.3.4.2.1.2	INTEGER	read-only	Internal connection type.
INT ibBmaPortConMediaClass	1.3.6.1.3.117.5.1.3.4.2.1.3	INTEGER	read-only	Connection Media Class.
INT ibBmaPortConConClass	1.3.6.1.3.117.5.1.3.4.2.1.4	INTEGER	read-only	Connection Class.
ibBmaModPowerInfo	1.3.6.1.3.117.5.1.3.5
I32 ibBmaOperThermalPower	1.3.6.1.3.117.5.1.3.5.1	Integer32	read-only	Maximum amount of power dissipated under normal operation including any vendor supplied exerciser over any sliding 60 second window expressed in mW. If this value is unspecified, a 0 should be returned.
I32 ibBmaOperCurrent	1.3.6.1.3.117.5.1.3.5.2	Integer32	read-only	Maximum amount of current drawn under normal operation including any vendor supplied exerciser across the range of VBulk (expressed in mA). If this value is unspecified, a 0 should be returned.
I32 ibBmaIdleCurrent	1.3.6.1.3.117.5.1.3.5.3	Integer32	read-only	Amount of current that a fully initialized device draws when waiting for functional requests (in mA). If this value is unspecified, a 0 will be returned.
I32 ibBmaInitCurrent	1.3.6.1.3.117.5.1.3.5.4	Integer32	read-only	Amount of current drawn during Modules Built-in self test or self-initialization execution across the range of VBulk (in mA). If this value is unspecified, a 0 will be returned.
I32 ibBmaInitTime	1.3.6.1.3.117.5.1.3.5.5	Integer32	read-only	Amount of time (in 10's of ms) from the end of Module Reset to the end of BIST and/or module self-initialization complete under non-fault conditions. The module must be ready for normal operation at the conclusion of this time, excluding any external software driven initialization. If the value is unspecified, a 0 will be returned.
T/F ibBmaIsMStandbySupported	1.3.6.1.3.117.5.1.3.5.6	TruthValue	read-only	Capability flag to indicate if MStandby is supported.
T/F ibBmaIsPowerMgmtSupported	1.3.6.1.3.117.5.1.3.5.7	TruthValue	read-only	Capability flag to indicate if power management is supported.
T/F ibBmaIsUSleepSupported	1.3.6.1.3.117.5.1.3.5.8	TruthValue	read-only	Capability flag to indicate if USleep is supported.
T/F ibBmaIsUStandbySupported	1.3.6.1.3.117.5.1.3.5.9	TruthValue	read-only	Capability flag to indicate if UStandby is supported.
INT ibBmaPowerClass	1.3.6.1.3.117.5.1.3.5.10	INTEGER	read-only	Power class.
INT ibBmaRedundantPower	1.3.6.1.3.117.5.1.3.5.11	INTEGER	read-only	Redundant power converter capability.
ibBmaPowerMgmtInfo	1.3.6.1.3.117.5.1.3.6
I32 ibBmaPowerMgmtIocCount	1.3.6.1.3.117.5.1.3.6.1	Integer32	read-only	Number of IOC capabilities.
ibBmaPowerMgmtIocTable	1.3.6.1.3.117.5.1.3.6.2		not-accessible	This table contains objects that describe the Power Management for each IOC.
ibBmaPowerMgmtIocEntry	1.3.6.1.3.117.5.1.3.6.2.1		not-accessible	The column definitions for the Power Managment IOC table.
I32 ibBmaPowerMgmtIocIndex	1.3.6.1.3.117.5.1.3.6.2.1.1	Integer32	not-accessible	Index for the Power Management IOC table.
T/F ibBmaPMIsIDozeSupported	1.3.6.1.3.117.5.1.3.6.2.1.2	TruthValue	read-only	Flag for Is I Doze supported.
T/F ibBmaPMIsINapSupported	1.3.6.1.3.117.5.1.3.6.2.1.3	TruthValue	read-only	Flag for Is I Nap supported.
T/F ibBmaPMIsISleepSupported	1.3.6.1.3.117.5.1.3.6.2.1.4	TruthValue	read-only	Flag for Is I Sleep supported.
T/F ibBmaPMIsIStandbySupported	1.3.6.1.3.117.5.1.3.6.2.1.5	TruthValue	read-only	Flag for Is I Standby supported.
T/F ibBmaPMWREIsIDozeSupported	1.3.6.1.3.117.5.1.3.6.2.1.6	TruthValue	read-only	Flag for Is WRE I Doze supported.
T/F ibBmaPMWREIsINapSupported	1.3.6.1.3.117.5.1.3.6.2.1.7	TruthValue	read-only	Flag for Is WRE I Nap supported.
T/F ibBmaPMWREIsISleepSupported	1.3.6.1.3.117.5.1.3.6.2.1.8	TruthValue	read-only	Flag for Is WRE I Sleep supported.
T/F ibBmaPMWREIsIStandbySupported	1.3.6.1.3.117.5.1.3.6.2.1.9	TruthValue	read-only	Flag for Is WRE I Standby supported.
I32 ibBmaPwrMgtIDozeCurrent	1.3.6.1.3.117.5.1.3.6.2.1.10	Integer32	read-only	The amount of total current drawn from the Bulk Power while in I-Doze PM state. The range is from 0 to 16,384 milliAmps.
I32 ibBmaPwrMgtINapCurrent	1.3.6.1.3.117.5.1.3.6.2.1.11	Integer32	read-only	The amount of total current drawn from the Bulk Power while in I-Nap PM state. The range is from 0 to 16,384 milliAmps.
I32 ibBmaPwrMgtISleepCurrent	1.3.6.1.3.117.5.1.3.6.2.1.12	Integer32	read-only	The amount of total current drawn from the Bulk Power while in I-Sleep PM state. The range is from 0 to 16,384 milliAmps.
I32 ibBmaPwrMgtIStandbyCurrent	1.3.6.1.3.117.5.1.3.6.2.1.13	Integer32	read-only	The amount of total current drawn from the Auxilliary Power while in I-Standby PM state. The Bulk Power drawn is defined to be 0 amps. The range is from 0 to 16,384 milliAmps.
ibBmaCmeInfo	1.3.6.1.3.117.5.1.3.7
INT ibBmaCmeGuidType	1.3.6.1.3.117.5.1.3.7.1	INTEGER	read-only	The CME GUID type.
OCT ibBmaCmeGuidValue	1.3.6.1.3.117.5.1.3.7.2	OCTET STRING	read-only	The GUID assigned to this CME. Needs to hold the longest possible GUID type (guid16(4)).
OCT ibBmaCmeFirmMinorRev	1.3.6.1.3.117.5.1.3.7.3	OCTET STRING	read-only	The minor revision of the CME firmware.
OCT ibBmaCmeFirmMajorRev	1.3.6.1.3.117.5.1.3.7.4	OCTET STRING	read-only	The major revision of the CME firmware.
OCT ibBmaCmeSlotNumbers	1.3.6.1.3.117.5.1.3.7.5	OCTET STRING	read-only	A 256 bit mask representing IB ports for which the CME provides IB-ML access. The mask allows slot numbers to be non-sequential. Slot numbers must be in the range 1 to 254. 0 is assigned to the CME and its containing Chassis via CME.
ibBmaOemInfo	1.3.6.1.3.117.5.1.3.8
ibBmaOemTable	1.3.6.1.3.117.5.1.3.8.1		not-accessible	This table contains objects that describe the OEM entries.
ibBmaOemEntry	1.3.6.1.3.117.5.1.3.8.1.1		not-accessible	The column definitions for the OEM table.
I32 ibBmaOemIndex	1.3.6.1.3.117.5.1.3.8.1.1.1	Integer32	not-accessible	Index for the OEM table.
INT ibBmaOemIdType	1.3.6.1.3.117.5.1.3.8.1.1.2	INTEGER	read-only	The OEM ID type.
OCT ibBmaOemIdValue	1.3.6.1.3.117.5.1.3.8.1.1.3	OCTET STRING	read-only	The OEM ID value.
I32 ibBmaOemDataLength	1.3.6.1.3.117.5.1.3.8.1.1.4	Integer32	read-only	The OEM Data field length.
OCT ibBmaOemDataBuf	1.3.6.1.3.117.5.1.3.8.1.1.5	OCTET STRING	read-only	The OEM Data buffer.
ibBmaBuddyInfo	1.3.6.1.3.117.5.1.3.9
I32 ibBmaBuddyCount	1.3.6.1.3.117.5.1.3.9.1	Integer32	read-only	The Buddy count. This is the number of InfiniBand nodes, excluding this node, that belong to the same enclosure as the node reporting this record. If no other node belongs to the same enclosure, the value will be 0 and there will be no entries in the ibBmaBuddyTable.
ibBmaBuddyTable	1.3.6.1.3.117.5.1.3.9.2		not-accessible	A table containing BMA Buddy Record information.
ibBmaBuddyEntry	1.3.6.1.3.117.5.1.3.9.2.1		not-accessible	A conceptual row of the ibBmaBuddyTable containing information about a particular Buddy table entry.
I32 ibBmaBuddyIndex	1.3.6.1.3.117.5.1.3.9.2.1.1	Integer32	not-accessible	Index that identifies this Buddy table entry.
INT ibBmaBuddyGuidType	1.3.6.1.3.117.5.1.3.9.2.1.2	INTEGER	read-only	The Buddy node GUID type.
OCT ibBmaBuddyGuidValue	1.3.6.1.3.117.5.1.3.9.2.1.3	OCTET STRING	read-only	The GUID assigned to this node. Needs to hold the longest possible GUID type (guid16(4)).
ibBmaAssetTagInfo	1.3.6.1.3.117.5.1.3.10
ibBmaAssetTagTable	1.3.6.1.3.117.5.1.3.10.1		not-accessible	A table containing BMA Asset Tag information.
ibBmaAssetTagEntry	1.3.6.1.3.117.5.1.3.10.1.1		not-accessible	A conceptual row of the ibBmaAssetTagTable containing information about a particular Asset Tag entry.
I32 ibBmaAssetTagIndex	1.3.6.1.3.117.5.1.3.10.1.1.1	Integer32	not-accessible	Index that identifies this Asset Tag table entry.
I32 ibBmaAssetTagFruHandle	1.3.6.1.3.117.5.1.3.10.1.1.2	Integer32	read-only	The FRU handle.
I32 ibBmaAssetTagLength	1.3.6.1.3.117.5.1.3.10.1.1.3	Integer32	read-only	The length of the ibBmaAssetTagValue object.
OCT ibBmaAssetTagValue	1.3.6.1.3.117.5.1.3.10.1.1.4	OCTET STRING	read-only	The Asset Tag.
ibBmaConformance	1.3.6.1.3.117.5.2
ibBmaCompliances	1.3.6.1.3.117.5.2.1
ibBmaBasicNodeCompliance	1.3.6.1.3.117.5.2.1.1			The basic node implementation requirements for agents that support the IPOIB BMA MIB.
ibBmaFullNodeCompliance	1.3.6.1.3.117.5.2.1.2			The full node implementation requirements for agents that support the IPOIB BMA MIB.
ibBmaGroups	1.3.6.1.3.117.5.2.2
ibBmaBmuInfoGroup	1.3.6.1.3.117.5.2.2.1			The ibBmaBmuInfoGroup defines the MIB objects that describe information about the Baseboard Management Unit (BMU).
ibBmaBKeyInfoGroup	1.3.6.1.3.117.5.2.2.2			The ibBmaBKeyInfo Group defines the MIB objects that describe information about the Baseboard Management keys (B_Keys).
ibBmaModuleInfoGroup	1.3.6.1.3.117.5.2.2.3			The ibBmaModuleInfo Group defines the MIB objects that describe information about the module.
ibBmaChassisInfoGroup	1.3.6.1.3.117.5.2.2.4			The ibBmaChassisInfo Group defines the MIB objects that describe information about a managed chassis.
ibBmaFruInfoGroup	1.3.6.1.3.117.5.2.2.5			The ibBmaFruInfo Group defines the MIB objects that describe information about the Fru attributes.
ibBmaPortConnectInfoGroup	1.3.6.1.3.117.5.2.2.6			The ibBmaPortConnectInfo Group defines the MIB objects that describe information about the port connections.
ibBmaModPowerInfoGroup	1.3.6.1.3.117.5.2.2.7			The ibBmaModPowerInfo Group defines the MIB objects that describe information about the power attributes of the module.
ibBmaPowerMgmtInfoGroup	1.3.6.1.3.117.5.2.2.8			The ibBmaPowerMgmtInfo Group defines the MIB objects that describe information about power management.
ibBmaCmeInfoGroup	1.3.6.1.3.117.5.2.2.9			The ibBmaCmeInfo Group defines the MIB objects that describe information about the CME.
ibBmaOemInfoGroup	1.3.6.1.3.117.5.2.2.10			The ibBmaOemInfo Group defines the MIB objects that describe information about OEM data.
ibBmaBuddyInfoGroup	1.3.6.1.3.117.5.2.2.11			The ibBmaBuddyInfo Group defines the MIB objects that describe information about the Buddy Info.
ibBmaAssetTagInfoGroup	1.3.6.1.3.117.5.2.2.12			The ibBmaAssetTagInfo Group defines the MIB objects that describe information about the asset tags.

RFC description

Provides managed object definitions for InfiniBand Baseboard Management Agent (BMA) instrumentation and baseboard management units.

Start monitoring InfiniBand switch/chassis baseboard management controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BMA-MIB

What Is BMA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description