All MIBs › CM-FACILITY-MIB › cmEthernetNetPortLinkLossFwdSignalType
cmEthernetNetPortLinkLossFwdSignalType
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetNetPortLinkLossFwdSignalType
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.7.1.42
Node type: OBJECT-TYPE
Type: CmLinkLossFwdSignalType
Access: read-write
Description: This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetNetPortLinkLossFwdEnabled is enabled. This object is only valid for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType.
What is cmEthernetNetPortLinkLossFwdSignalType?
This read-write, now-deprecated CmLinkLossFwdSignalType object defined how Link Loss Forwarding signaled a detected failure (applicable only when cmEthernetNetPortLinkLossFwdEnabled is set, and only on FSP150CM Release 3.1). It's mainly relevant to admins maintaining legacy FSP150CM 3.1 deployments, since newer platforms use cmEthernetAccPortLinkLossFwdTxActionType instead for this signaling behavior. For example, an admin auditing an older FSP150CM 3.1 node might still find cmEthernetNetPortLinkLossFwdSignalType configured, but on current hardware would instead look for the replacement TxActionType object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.42 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortLinkLossFwdSignalType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.42.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortLinkLossFwdSignalType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.42.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetNetPortLinkLossFwdSignalType OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.7 | cmEthernetNetPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1 | cmEthernetNetPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.42 | cmEthernetNetPortLinkLossFwdSignalType | CM-FACILITY-MIB |