All MIBs › CM-FACILITY-MIB › gps10MHzPortAdminState
gps10MHzPortAdminState
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::gps10MHzPortAdminState
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.18.1.4
Node type: OBJECT-TYPE
Type: AdminState
Access: read-write
Description:
This object represents the Administrative State of the Port.
What is gps10MHzPortAdminState?
This object represents the administrative state (enabled or disabled) of a GPS 10 MHz timing port used for synchronization. The admin state allows operators to manually control whether the port is active in providing timing signals to the system. A telecom operator would adjust this setting to enable or disable the GPS input based on system configuration and timing redundancy requirements.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.18.1.4 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::gps10MHzPortAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.18.1.4.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::gps10MHzPortAdminState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.18.1.4.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.18 | gps10MHzPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1 | gps10MHzPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.4 | gps10MHzPortAdminState | CM-FACILITY-MIB |