All MIBs › CM-FACILITY-MIB › cmFlowAdminState
cmFlowAdminState
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmFlowAdminState
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.4.1.3
Node type: OBJECT-TYPE
Type: AdminState
Access: read-write
Description:
This object represents the Administrative State of the Flow.
What is cmFlowAdminState?
This object controls the desired operational state of a network flow (data stream) in an ADVA optical transport system. Operators set this to enable (up) or disable (down) traffic on a configured flow, allowing manual control of when data is allowed to pass through the facility. An operator would use this when provisioning circuits or when temporarily halting traffic flow for maintenance without deleting the entire flow configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.4.1.3 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmFlowAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.4.1.3.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmFlowAdminState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.4.1.3.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.4 | cmFlowTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1 | cmFlowEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.3 | cmFlowAdminState | CM-FACILITY-MIB |