CORIANT-GROOVE-MIB

All MIBs › CORIANT-GROOVE-MIB

Organization: Coriant R&D

Last Updated: 2018-07-10

Category: Optical and WDM

Description: Manages Coriant Groove optical transponder configuration, performance monitoring, and alarm objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CORIANT-GROOVE-MIB?

CORIANT-GROOVE-MIB is Coriant's SNMP MIB for the Groove G30 optical transponder platform, covering configuration, performance monitoring, and - most extensively in the sampled objects - fault and alarm reporting for the device. It exposes rich alarm/notification data including the affected functional entity, condition type, location, direction, severity level, service-affecting flag, and timestamps for each raised or cleared condition. This makes it central to monitoring the operational/fault status of the optical transponder hardware - surfacing hardware faults, degraded signal conditions, and their severity/service impact rather than raw performance counters. As an optical-transport product MIB it likely complements standard ITU-T/telecom performance-monitoring conventions and Coriant's broader product MIB tree ("coriant.products.fault"). It is typically deployed in optical/DWDM transport networks where NOC staff monitor Groove G30 transponders for line/card faults and service-affecting alarms. Engineers can download the CORIANT-GROOVE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CORIANT-GROOVE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Coriant Groove G30 optical transport platform

Monitoring Examples

An operator would subscribe to traps carrying notificationConditionType, notificationSeverityLevel, and notificationServiceAffect to be alerted the moment a Groove G30 transponder raises a fault, with notificationFmEntity and notificationLocation identifying exactly which component and direction (line/client side) is affected. notificationOccurrenceDateTime and notificationLastSeverityLevel let an operator track when a condition started and whether its severity has changed or cleared. A notificationServiceAffect flag of 'true' combined with a high severity would flag a fault requiring immediate attention versus a minor, non-service-affecting warning.

What Can Be Monitored

alarm/fault condition type
affected entity and location
alarm severity level
service-affecting status
alarm occurrence timestamp

Imported Objects

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
RowPointer
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
coriant	1.3.6.1.4.1.42229
products	1.3.6.1.4.1.42229.1
groove	1.3.6.1.4.1.42229.1.2			SNMP MIB for Groove G30 release 2.1.0
fault	1.3.6.1.4.1.42229.1.2.1
notificationInfo	1.3.6.1.4.1.42229.1.2.1.1
notificationObject	1.3.6.1.4.1.42229.1.2.1.1.1
STR notificationFmEntity	1.3.6.1.4.1.42229.1.2.1.1.1.1	DisplayString	read-only	The management object instance which the alarm or condition is reported against.
COR notificationConditionType	1.3.6.1.4.1.42229.1.2.1.1.1.2	CoriantFmtypesConditionType	read-only	Identifies the current standing conditions which cause alarms and/or events.
COR notificationLocation	1.3.6.1.4.1.42229.1.2.1.1.1.3	CoriantTypesManagementLocation	read-only	Indicates if the alarm or event location is near end or far end.
COR notificationDirection	1.3.6.1.4.1.42229.1.2.1.1.1.4	CoriantTypesManagementDirection	read-only	Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.
COR notificationTimePeriod	1.3.6.1.4.1.42229.1.2.1.1.1.5	CoriantTypesManagementTimePeriod	read-only	Indicates the time-period increments during which PM data is collected.
COR notificationServiceAffect	1.3.6.1.4.1.42229.1.2.1.1.1.6	CoriantFmtypesServiceAffectFm	read-only	Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.
COR notificationSeverityLevel	1.3.6.1.4.1.42229.1.2.1.1.1.7	CoriantFmtypesSeverityLevel	read-only	Indicates the notification code (severity level) associated with the alarm type of service affecting.
IET notificationOccurrenceDateTime	1.3.6.1.4.1.42229.1.2.1.1.1.8	IetfYangTypesDateAndTime	read-only	Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.
OCT notificationConditionDescription	1.3.6.1.4.1.42229.1.2.1.1.1.9	OCTET STRING	read-only	Describes the condition that caused the alarm.
INT notificationAlarmConditionType	1.3.6.1.4.1.42229.1.2.1.1.1.10	INTEGER	read-only	Alarm condition types, for example, standing or transient.
COR notificationLastSeverityLevel	1.3.6.1.4.1.42229.1.2.1.1.1.11	CoriantFmtypesSeverityLevel	read-only	Indicates the last severity level associated with the alarm type, which provides the info of alarm severity declared and cleared.
OCT notificationExtensionDescription	1.3.6.1.4.1.42229.1.2.1.1.1.12	OCTET STRING	read-only	The description in alarm notification to provide additional information.
COR notificationFmEntityType	1.3.6.1.4.1.42229.1.2.1.1.1.13	CoriantFmtypesEntityTypeFm	read-only	Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.
notificationTrap	1.3.6.1.4.1.42229.1.2.1.2
NTF alarmNotification	1.3.6.1.4.1.42229.1.2.1.2.1
NTF notAlarmedEventNotification	1.3.6.1.4.1.42229.1.2.1.2.2
alarmProfile	1.3.6.1.4.1.42229.1.2.1.4
alarmProfileTable	1.3.6.1.4.1.42229.1.2.1.4.1		not-accessible	Alarm profile defines the severity profile of alarm and event.
alarmProfileEntry	1.3.6.1.4.1.42229.1.2.1.4.1.1		not-accessible	Entry of alarmProfileTable
U32 alarmProfileId	1.3.6.1.4.1.42229.1.2.1.4.1.1.1	Unsigned32	read-only	alarm profile identifier which uniquely specify alarm profile. alarm profile 1 is supported firstly and applicable to all entities implicitly.
alarmProfileENTR	1.3.6.1.4.1.42229.1.2.1.5
alarmProfileENTRTable	1.3.6.1.4.1.42229.1.2.1.5.1		not-accessible	The list includes alarm/event entries of an alarm-profile.
alarmProfileENTREntry	1.3.6.1.4.1.42229.1.2.1.5.1.1		not-accessible	Entry of alarmProfileENTRTable
COR alarmProfileENTRConditionType	1.3.6.1.4.1.42229.1.2.1.5.1.1.1	CoriantFmtypesConditionType	read-only	Identifies the current standing conditions which cause conditions and/or events.
COR alarmProfileENTRFmEntityType	1.3.6.1.4.1.42229.1.2.1.5.1.1.2	CoriantFmtypesEntityTypeFm	read-only	Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.
COR alarmProfileENTRTimePeriod	1.3.6.1.4.1.42229.1.2.1.5.1.1.3	CoriantTypesManagementTimePeriod	read-only	Indicates the time-period increments during which PM data is collected.
COR alarmProfileENTRSeverityLevelSa	1.3.6.1.4.1.42229.1.2.1.5.1.1.4	CoriantFmtypesSeverityLevel	read-only	Indicates the notification code (severity level) associated with the condition type of service affecting.
COR alarmProfileENTRSeverityLevelNsa	1.3.6.1.4.1.42229.1.2.1.5.1.1.5	CoriantFmtypesSeverityLevel	read-only	Indicates the notification code (severity level) associated with the condition type of non-service affecting.
standingCondition	1.3.6.1.4.1.42229.1.2.1.6
standingConditionTable	1.3.6.1.4.1.42229.1.2.1.6.1		not-accessible	The list includes active standing alarms.
standingConditionEntry	1.3.6.1.4.1.42229.1.2.1.6.1.1		not-accessible	Entry of standingConditionTable
NUM standingConditionFmEntity	1.3.6.1.4.1.42229.1.2.1.6.1.1.1	RowPointer	read-only	The management object instance which the alarm or condition is reported against.
COR standingConditionConditionType	1.3.6.1.4.1.42229.1.2.1.6.1.1.2	CoriantFmtypesConditionType	read-only	Identifies the current standing conditions which cause alarms and/or events.
COR standingConditionLocation	1.3.6.1.4.1.42229.1.2.1.6.1.1.3	CoriantTypesManagementLocation	read-only	Indicates if the alarm or event location is near end or far end.
COR standingConditionDirection	1.3.6.1.4.1.42229.1.2.1.6.1.1.4	CoriantTypesManagementDirection	read-only	Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.
COR standingConditionTimePeriod	1.3.6.1.4.1.42229.1.2.1.6.1.1.5	CoriantTypesManagementTimePeriod	read-only	Indicates the time-period increments during which PM data is collected.
COR standingConditionServiceAffect	1.3.6.1.4.1.42229.1.2.1.6.1.1.6	CoriantFmtypesServiceAffectFm	read-only	Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.
COR standingConditionSeverityLevel	1.3.6.1.4.1.42229.1.2.1.6.1.1.7	CoriantFmtypesSeverityLevel	read-only	Indicates the notification code (severity level) associated with the alarm type of service affecting.
IET standingConditionOccurrenceDateTime	1.3.6.1.4.1.42229.1.2.1.6.1.1.8	IetfYangTypesDateAndTime	read-only	Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.
OCT standingConditionConditionDescription	1.3.6.1.4.1.42229.1.2.1.6.1.1.9	OCTET STRING	read-only	Describes the condition that caused the alarm.
COR standingConditionFmEntityType	1.3.6.1.4.1.42229.1.2.1.6.1.1.10	CoriantFmtypesEntityTypeFm	read-only	Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.
ne	1.3.6.1.4.1.42229.1.2.2
neInfo	1.3.6.1.4.1.42229.1.2.2.1
OCT neId	1.3.6.1.4.1.42229.1.2.2.1.1	OCTET STRING	read-only	Network Element's system identification code. Note that this is unique identifier for each NE. default value :
OCT neName	1.3.6.1.4.1.42229.1.2.2.1.2	OCTET STRING	read-only	Name assigned to this particular NE. A readable name for the NE. It can be used for NE. But not expected to be used by NM for unique NE identification The different function from ne-id is that user can keep ne-id unchanged, which uniquely identifies the NE, and update ne-name if necessary. default value :
OCT neType	1.3.6.1.4.1.42229.1.2.2.1.3	OCTET STRING	read-only	Type of the NE default value :GROOVE_G30
OCT neLocation	1.3.6.1.4.1.42229.1.2.2.1.4	OCTET STRING	read-only	Name of the location of this particular NE
OCT neSite	1.3.6.1.4.1.42229.1.2.2.1.5	OCTET STRING	read-only	Name or CLLI of the site where this NE is located
INT neAltitude	1.3.6.1.4.1.42229.1.2.2.1.6	INTEGER	read-only	The altitude of the Network Element in meters UNITS:meters
OCT neVendor	1.3.6.1.4.1.42229.1.2.2.1.7	OCTET STRING	read-only	Vendor name of this NE default value :Coriant
COR neTemperature	1.3.6.1.4.1.42229.1.2.2.1.8	CoriantTypesTemperature	read-only	Ambient temperature sensed by the primary shelf for NE level
system	1.3.6.1.4.1.42229.1.2.2.2
COR systemUnknownPluggableReport	1.3.6.1.4.1.42229.1.2.2.2.1	CoriantTypesEnableSwitch	read-only	The attribute will enable/disable the alarm reporting for unknown pluggables present on the NE. default value :enabled
COR systemPowerConsumptionCurrent	1.3.6.1.4.1.42229.1.2.2.2.2	CoriantTypesPower	read-only	Current power consumption of the system.
COR systemPowerConsumptionEstimatedMax	1.3.6.1.4.1.42229.1.2.2.2.3	CoriantTypesPower	read-only	Derived maximal power consumption around room temperature.
COR systemFactoryResetButton	1.3.6.1.4.1.42229.1.2.2.2.4	CoriantTypesEnableSwitch	read-only	The attribute will enable/disable factory reset button function on the NE. default value :enabled
console	1.3.6.1.4.1.42229.1.2.2.3
INT consoleBaudRate	1.3.6.1.4.1.42229.1.2.2.3.1	INTEGER	read-only	The baud rate of console port default value :9600
equipment	1.3.6.1.4.1.42229.1.2.3
shelf	1.3.6.1.4.1.42229.1.2.3.1
shelfTable	1.3.6.1.4.1.42229.1.2.3.1.1		not-accessible	NULL
shelfEntry	1.3.6.1.4.1.42229.1.2.3.1.1.1		not-accessible	Entry of shelfTable
COR shelfId	1.3.6.1.4.1.42229.1.2.3.1.1.1.1	CoriantTypesShelfId	read-only	Identifier of the shelf. It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf.
OCT shelfLocation	1.3.6.1.4.1.42229.1.2.3.1.1.1.2	OCTET STRING	read-only	Name of the location of this particular shelf.
COR shelfInletTemperature	1.3.6.1.4.1.42229.1.2.3.1.1.1.3	CoriantTypesTemperature	read-only	shelf inlet temperature
COR shelfOutletTemperature	1.3.6.1.4.1.42229.1.2.3.1.1.1.4	CoriantTypesTemperature	read-only	shelf outlet temperature
INT shelfAdminStatus	1.3.6.1.4.1.42229.1.2.3.1.1.1.5	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT shelfOperStatus	1.3.6.1.4.1.42229.1.2.3.1.1.1.6	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT shelfAvailStatus	1.3.6.1.4.1.42229.1.2.3.1.1.1.7	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT shelfAliasName	1.3.6.1.4.1.42229.1.2.3.1.1.1.8	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
slot	1.3.6.1.4.1.42229.1.2.3.2
slotTable	1.3.6.1.4.1.42229.1.2.3.2.1		not-accessible	NULL
slotEntry	1.3.6.1.4.1.42229.1.2.3.2.1.1		not-accessible	Entry of slotTable
COR slotId	1.3.6.1.4.1.42229.1.2.3.2.1.1.1	CoriantTypesSlotId	read-only	Identifier of the slot. It shall be an integer number and assigned implicitly by the system.
COR slotActualCardType	1.3.6.1.4.1.42229.1.2.3.2.1.1.2	CoriantTypesEquipmentType	read-only	Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty
OCT slotPossibleCardTypes	1.3.6.1.4.1.42229.1.2.3.2.1.1.3	OCTET STRING	read-only	Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.
INT slotAdminStatus	1.3.6.1.4.1.42229.1.2.3.2.1.1.4	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT slotOperStatus	1.3.6.1.4.1.42229.1.2.3.2.1.1.5	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT slotAvailStatus	1.3.6.1.4.1.42229.1.2.3.2.1.1.6	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT slotAliasName	1.3.6.1.4.1.42229.1.2.3.2.1.1.7	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
card	1.3.6.1.4.1.42229.1.2.3.3
cardTable	1.3.6.1.4.1.42229.1.2.3.3.1		not-accessible	Card is a container carried by a slot.
cardEntry	1.3.6.1.4.1.42229.1.2.3.3.1.1		not-accessible	Entry of cardTable
COR cardRequiredType	1.3.6.1.4.1.42229.1.2.3.3.1.1.1	CoriantTypesCardType	read-only	The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.
OCT cardEquipmentName	1.3.6.1.4.1.42229.1.2.3.3.1.1.2	OCTET STRING	read-only	The attribute indicates an additional field to identify the module.
INT cardAdminStatus	1.3.6.1.4.1.42229.1.2.3.3.1.1.3	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT cardOperStatus	1.3.6.1.4.1.42229.1.2.3.3.1.1.4	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT cardAvailStatus	1.3.6.1.4.1.42229.1.2.3.3.1.1.5	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
OCT cardAliasName	1.3.6.1.4.1.42229.1.2.3.3.1.1.6	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR cardFanSpeedRate	1.3.6.1.4.1.42229.1.2.3.3.1.1.7	CoriantTypesPercentage	read-only	The fan speed of percentage. Conditions:../required-type = 'FAN'
INT cardSwitchingType	1.3.6.1.4.1.42229.1.2.3.3.1.1.8	INTEGER	read-only	The traffic switching type of card. Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') default value :otn
COR cardTemperature	1.3.6.1.4.1.42229.1.2.3.3.1.1.9	CoriantTypesTemperature	read-only	Temperature at the monitoring point.
INT cardMode	1.3.6.1.4.1.42229.1.2.3.3.1.1.10	INTEGER	read-only	Specify the card mode, e.g. normal or regen. default value :normal
subslot	1.3.6.1.4.1.42229.1.2.3.4
subslotTable	1.3.6.1.4.1.42229.1.2.3.4.1		not-accessible	NULL
subslotEntry	1.3.6.1.4.1.42229.1.2.3.4.1.1		not-accessible	Entry of subslotTable
COR subslotId	1.3.6.1.4.1.42229.1.2.3.4.1.1.1	CoriantTypesSlotId	read-only	Identifier of the subslot.
COR subslotActualCardType	1.3.6.1.4.1.42229.1.2.3.4.1.1.2	CoriantTypesEquipmentType	read-only	Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty
OCT subslotPossibleCardTypes	1.3.6.1.4.1.42229.1.2.3.4.1.1.3	OCTET STRING	read-only	Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.
INT subslotAdminStatus	1.3.6.1.4.1.42229.1.2.3.4.1.1.4	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT subslotOperStatus	1.3.6.1.4.1.42229.1.2.3.4.1.1.5	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT subslotAvailStatus	1.3.6.1.4.1.42229.1.2.3.4.1.1.6	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT subslotAliasName	1.3.6.1.4.1.42229.1.2.3.4.1.1.7	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
subcard	1.3.6.1.4.1.42229.1.2.3.5
subcardTable	1.3.6.1.4.1.42229.1.2.3.5.1		not-accessible	Subcard is a container carried by a subslot.
subcardEntry	1.3.6.1.4.1.42229.1.2.3.5.1.1		not-accessible	Entry of subcardTable
COR subcardRequiredType	1.3.6.1.4.1.42229.1.2.3.5.1.1.1	CoriantTypesCardType	read-only	The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.
OCT subcardEquipmentName	1.3.6.1.4.1.42229.1.2.3.5.1.1.2	OCTET STRING	read-only	The attribute indicates an additional field to identify the module.
INT subcardAdminStatus	1.3.6.1.4.1.42229.1.2.3.5.1.1.3	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT subcardOperStatus	1.3.6.1.4.1.42229.1.2.3.5.1.1.4	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT subcardAvailStatus	1.3.6.1.4.1.42229.1.2.3.5.1.1.5	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
OCT subcardAliasName	1.3.6.1.4.1.42229.1.2.3.5.1.1.6	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR subcardTemperature	1.3.6.1.4.1.42229.1.2.3.5.1.1.7	CoriantTypesTemperature	read-only	Temperature at the monitoring point.
port	1.3.6.1.4.1.42229.1.2.3.6
portTable	1.3.6.1.4.1.42229.1.2.3.6.1		not-accessible	NULL
portEntry	1.3.6.1.4.1.42229.1.2.3.6.1.1		not-accessible	Entry of portTable
COR portId	1.3.6.1.4.1.42229.1.2.3.6.1.1.1	CoriantTypesPortId	read-only	The identifier is defined to uniquely identify the port.
OCT portPossiblePluggableTypes	1.3.6.1.4.1.42229.1.2.3.6.1.1.2	OCTET STRING	read-only	Defined all the pluggable types which can be equipped on the port. Needs to be re-defined in the project specific model. This is a leaf list, encode by some leafs. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon')
COR portActualPluggableType	1.3.6.1.4.1.42229.1.2.3.6.1.1.3	CoriantTypesEquipmentType	read-only	Pluggable type for each port according to the actually equipping. Needs to be re-defined in the project specific model. Conditions:../port-type != 'optical' default value :empty
COR portRxOpticalPower	1.3.6.1.4.1.42229.1.2.3.6.1.1.4	CoriantTypesOpticalPower	read-only	Received optical power
COR portTxOpticalPower	1.3.6.1.4.1.42229.1.2.3.6.1.1.5	CoriantTypesOpticalPower	read-only	Transmitted optical power
COR portRxOpticalPowerSelectedChannel	1.3.6.1.4.1.42229.1.2.3.6.1.1.6	CoriantTypesOpticalPower	read-only	Optical power of the selected channel on coherent receiver, which will be different from the rx-optical-power when multiple channels input simultaneously.
COR portRxOpticalPowerLane1	1.3.6.1.4.1.42229.1.2.3.6.1.1.7	CoriantTypesOpticalPower	read-only	Received optical power of lane 1.
COR portRxOpticalPowerLane2	1.3.6.1.4.1.42229.1.2.3.6.1.1.8	CoriantTypesOpticalPower	read-only	Received optical power of lane 2.
COR portRxOpticalPowerLane3	1.3.6.1.4.1.42229.1.2.3.6.1.1.9	CoriantTypesOpticalPower	read-only	Received optical power of lane 3.
COR portRxOpticalPowerLane4	1.3.6.1.4.1.42229.1.2.3.6.1.1.10	CoriantTypesOpticalPower	read-only	Received optical power of lane 4.
COR portTxOpticalPowerLane1	1.3.6.1.4.1.42229.1.2.3.6.1.1.11	CoriantTypesOpticalPower	read-only	Transmitted optical power lane 1.
COR portTxOpticalPowerLane2	1.3.6.1.4.1.42229.1.2.3.6.1.1.12	CoriantTypesOpticalPower	read-only	Transmitted optical power lane 2.
COR portTxOpticalPowerLane3	1.3.6.1.4.1.42229.1.2.3.6.1.1.13	CoriantTypesOpticalPower	read-only	Transmitted optical power lane 3.
COR portTxOpticalPowerLane4	1.3.6.1.4.1.42229.1.2.3.6.1.1.14	CoriantTypesOpticalPower	read-only	Transmitted optical power lane 4.
COR portDirectionType	1.3.6.1.4.1.42229.1.2.3.6.1.1.15	CoriantTypesTypeOfDirection	read-only	Supported direction of the optical port.
OID portName	1.3.6.1.4.1.42229.1.2.3.6.1.1.16	CoriantTypesNameIdentifier	read-only	The name of the port. default value :unspecified
INT portType	1.3.6.1.4.1.42229.1.2.3.6.1.1.17	INTEGER	read-only	The type of port. Needs to be provided upon Port creation
COR portMode	1.3.6.1.4.1.42229.1.2.3.6.1.1.18	CoriantTypesPortMode	read-only	The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') default value :not-applicable
INT portAdminStatus	1.3.6.1.4.1.42229.1.2.3.6.1.1.19	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT portOperStatus	1.3.6.1.4.1.42229.1.2.3.6.1.1.20	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT portAvailStatus	1.3.6.1.4.1.42229.1.2.3.6.1.1.21	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT portAliasName	1.3.6.1.4.1.42229.1.2.3.6.1.1.22	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OCT portServiceLabel	1.3.6.1.4.1.42229.1.2.3.6.1.1.23	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT portConnectedTo	1.3.6.1.4.1.42229.1.2.3.6.1.1.24	OCTET STRING	read-only	Indicate neighbour port/facility entity to which the current port/facility is connected to.
INT portArcConfig	1.3.6.1.4.1.42229.1.2.3.6.1.1.25	INTEGER	read-only	The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi
INT portArcState	1.3.6.1.4.1.42229.1.2.3.6.1.1.26	INTEGER	read-only	The current mode of the Alarm Report Control (ARC).
INT portArcSubState	1.3.6.1.4.1.42229.1.2.3.6.1.1.27	INTEGER	read-only	Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr
U32 portArcTimer	1.3.6.1.4.1.42229.1.2.3.6.1.1.28	Unsigned32	read-only	The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440
OCT portArcRemainingTime	1.3.6.1.4.1.42229.1.2.3.6.1.1.29	OCTET STRING	read-only	The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.
COR portExternalConnectivity	1.3.6.1.4.1.42229.1.2.3.6.1.1.30	CoriantTypesYesNo	read-only	Indicates the port is connected externally or not. default value :no
subport	1.3.6.1.4.1.42229.1.2.3.7
subportTable	1.3.6.1.4.1.42229.1.2.3.7.1		not-accessible	NULL
subportEntry	1.3.6.1.4.1.42229.1.2.3.7.1.1		not-accessible	Entry of subportTable
COR subportId	1.3.6.1.4.1.42229.1.2.3.7.1.1.1	CoriantTypesPortId	read-only	The identifier is defined to uniquely identify the subport.
OID subportPortName	1.3.6.1.4.1.42229.1.2.3.7.1.1.2	CoriantTypesNameIdentifier	read-only	The name of the port. default value :unspecified
INT subportPortType	1.3.6.1.4.1.42229.1.2.3.7.1.1.3	INTEGER	read-only	The type of port. Needs to be provided upon Port creation
COR subportPortMode	1.3.6.1.4.1.42229.1.2.3.7.1.1.4	CoriantTypesPortMode	read-only	The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') default value :not-applicable
INT subportAdminStatus	1.3.6.1.4.1.42229.1.2.3.7.1.1.5	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT subportOperStatus	1.3.6.1.4.1.42229.1.2.3.7.1.1.6	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT subportAvailStatus	1.3.6.1.4.1.42229.1.2.3.7.1.1.7	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT subportAliasName	1.3.6.1.4.1.42229.1.2.3.7.1.1.8	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OCT subportServiceLabel	1.3.6.1.4.1.42229.1.2.3.7.1.1.9	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT subportConnectedTo	1.3.6.1.4.1.42229.1.2.3.7.1.1.10	OCTET STRING	read-only	Indicate neighbour port/facility entity to which the current port/facility is connected to.
INT subportArcConfig	1.3.6.1.4.1.42229.1.2.3.7.1.1.11	INTEGER	read-only	The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi
INT subportArcState	1.3.6.1.4.1.42229.1.2.3.7.1.1.12	INTEGER	read-only	The current mode of the Alarm Report Control (ARC).
INT subportArcSubState	1.3.6.1.4.1.42229.1.2.3.7.1.1.13	INTEGER	read-only	Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr
U32 subportArcTimer	1.3.6.1.4.1.42229.1.2.3.7.1.1.14	Unsigned32	read-only	The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440
OCT subportArcRemainingTime	1.3.6.1.4.1.42229.1.2.3.7.1.1.15	OCTET STRING	read-only	The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.
COR subportRxOpticalPower	1.3.6.1.4.1.42229.1.2.3.7.1.1.16	CoriantTypesOpticalPower	read-only	Received optical power
COR subportTxOpticalPower	1.3.6.1.4.1.42229.1.2.3.7.1.1.17	CoriantTypesOpticalPower	read-only	Transmitted optical power
COR subportExternalConnectivity	1.3.6.1.4.1.42229.1.2.3.7.1.1.18	CoriantTypesYesNo	read-only	Indicates the port is connected externally or not. default value :no
pluggable	1.3.6.1.4.1.42229.1.2.3.8
pluggableTable	1.3.6.1.4.1.42229.1.2.3.8.1		not-accessible	Represents the Pluggable object
pluggableEntry	1.3.6.1.4.1.42229.1.2.3.8.1.1		not-accessible	Entry of pluggableTable
COR pluggableRequiredType	1.3.6.1.4.1.42229.1.2.3.8.1.1.1	CoriantTypesPluggableType	read-only	The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.
COR pluggableFormFactor	1.3.6.1.4.1.42229.1.2.3.8.1.1.2	CoriantTypesPluggableFormFactor	read-only	Indicating the exact form factor of the pluggable. default value :Unrecognized
OCT pluggableInterfaceType	1.3.6.1.4.1.42229.1.2.3.8.1.1.3	OCTET STRING	read-only	Indicating interface type of the pluggable. default value :
INT pluggableLaserSource	1.3.6.1.4.1.42229.1.2.3.8.1.1.4	INTEGER	read-only	The type of laser frequency. Only tx-lo-independent type support och-os rx-frequency working Conditions:../required-type = 'CFP2' default value :not-available
OCT pluggableHwVersion	1.3.6.1.4.1.42229.1.2.3.8.1.1.5	OCTET STRING	read-only	The attribute Identifies the Hardware Version of the module that populates the slot.
OCT pluggableVendor	1.3.6.1.4.1.42229.1.2.3.8.1.1.6	OCTET STRING	read-only	Vendor information.
OCT pluggableSerialNumber	1.3.6.1.4.1.42229.1.2.3.8.1.1.7	OCTET STRING	read-only	This is the value of serial number stored in EEPROM of the equipment.
OCT pluggableFwVersion	1.3.6.1.4.1.42229.1.2.3.8.1.1.8	OCTET STRING	read-only	Current Firmware (FW) version on the equipment.
OCT pluggablePartNumber	1.3.6.1.4.1.42229.1.2.3.8.1.1.9	OCTET STRING	read-only	Identifies the Part Number of the equipment.
OCT pluggableClei	1.3.6.1.4.1.42229.1.2.3.8.1.1.10	OCTET STRING	read-only	Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages.
OCT pluggableEquipmentName	1.3.6.1.4.1.42229.1.2.3.8.1.1.11	OCTET STRING	read-only	The attribute indicates an additional field to identify the module.
INT pluggableAdminStatus	1.3.6.1.4.1.42229.1.2.3.8.1.1.12	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT pluggableOperStatus	1.3.6.1.4.1.42229.1.2.3.8.1.1.13	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT pluggableAvailStatus	1.3.6.1.4.1.42229.1.2.3.8.1.1.14	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
OCT pluggableAliasName	1.3.6.1.4.1.42229.1.2.3.8.1.1.15	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR pluggableTemperature	1.3.6.1.4.1.42229.1.2.3.8.1.1.16	CoriantTypesTemperature	read-only	Temperature at the monitoring point.
amplifier	1.3.6.1.4.1.42229.1.2.3.9
amplifierTable	1.3.6.1.4.1.42229.1.2.3.9.1		not-accessible	The list of optical amplifier on an equipment.
amplifierEntry	1.3.6.1.4.1.42229.1.2.3.9.1.1		not-accessible	Entry of amplifierTable
OID amplifierName	1.3.6.1.4.1.42229.1.2.3.9.1.1.1	CoriantTypesNameIdentifier	read-only	User-defined name assigned to identify a specific amplifier in the device
NUM amplifierSupportingInputPort	1.3.6.1.4.1.42229.1.2.3.9.1.1.2	RowPointer	read-only	Identifier of the supporting input port.
NUM amplifierSupportingOutputPort	1.3.6.1.4.1.42229.1.2.3.9.1.1.3	RowPointer	read-only	Identifier of the supporting output port.
INT amplifierAdminStatus	1.3.6.1.4.1.42229.1.2.3.9.1.1.4	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT amplifierOperStatus	1.3.6.1.4.1.42229.1.2.3.9.1.1.5	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT amplifierAvailStatus	1.3.6.1.4.1.42229.1.2.3.9.1.1.6	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT amplifierAliasName	1.3.6.1.4.1.42229.1.2.3.9.1.1.7	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR amplifierEnable	1.3.6.1.4.1.42229.1.2.3.9.1.1.8	CoriantTypesEnableSwitch	read-only	Configuration for enable or disable the amplifier. default value :disabled
COR amplifierInputLosShutdown	1.3.6.1.4.1.42229.1.2.3.9.1.1.9	CoriantTypesEnableSwitch	read-only	Enable or disable the function of automatic shutdown per input LOS. default value :enabled
INT amplifierControlMode	1.3.6.1.4.1.42229.1.2.3.9.1.1.10	INTEGER	read-only	Control mode of the amplifier. default value :auto
INT amplifierMode	1.3.6.1.4.1.42229.1.2.3.9.1.1.11	INTEGER	read-only	The operating mode of the amplifier default value :constant-gain
INT amplifierType	1.3.6.1.4.1.42229.1.2.3.9.1.1.12	INTEGER	read-only	Type of the amplifier. default value :variable-gain-EDFA
COR amplifierTargetGain	1.3.6.1.4.1.42229.1.2.3.9.1.1.13	CoriantTypesOpticalDB	read-only	Setting gain to the amplifier for constant-gain mode in manual control mode.
COR amplifierOperatingGain	1.3.6.1.4.1.42229.1.2.3.9.1.1.14	CoriantTypesOpticalDB	read-only	Operating gain of the amplifier, which is the actually configured gain on the amplifier.
COR amplifierGainAdjustment	1.3.6.1.4.1.42229.1.2.3.9.1.1.15	CoriantTypesOpticalDB	read-only	The value is used for adjustment of gain when the amplifier in automatic control mode, the automatically caculated gain will include offset of this attribute. default value :0.0
COR amplifierGainRangeMin	1.3.6.1.4.1.42229.1.2.3.9.1.1.16	CoriantTypesOpticalDB	read-only	The minimum of settable gain.
COR amplifierGainRangeMax	1.3.6.1.4.1.42229.1.2.3.9.1.1.17	CoriantTypesOpticalPower	read-only	The maximum of settable gain. UNITS:dB
COR amplifierOutputPowerMon	1.3.6.1.4.1.42229.1.2.3.9.1.1.18	CoriantTypesOpticalPower	read-only	Monitored aggregation signal output power. UNITS:dBm
COR amplifierOutputPowerMonWithAse	1.3.6.1.4.1.42229.1.2.3.9.1.1.19	CoriantTypesOpticalPower	read-only	Monitored aggregation total output power including both signal and ASE. UNITS:dBm
COR amplifierInputPowerMon	1.3.6.1.4.1.42229.1.2.3.9.1.1.20	CoriantTypesOpticalPower	read-only	Monitored aggregation input power. UNITS:dBm
COR amplifierOutputVoa	1.3.6.1.4.1.42229.1.2.3.9.1.1.21	CoriantTypesOpticalDB	read-only	Configurable optical attenuation at output of the amplifier. default value :0.0
COR amplifierPowerBeforeOutputVoa	1.3.6.1.4.1.42229.1.2.3.9.1.1.22	CoriantTypesOpticalPower	read-only	Monitored optical power after output VOA. UNITS:dBm
tdc	1.3.6.1.4.1.42229.1.2.3.10
tdcTable	1.3.6.1.4.1.42229.1.2.3.10.1		not-accessible	The list of optical tdc on an equipment.
tdcEntry	1.3.6.1.4.1.42229.1.2.3.10.1.1		not-accessible	Entry of tdcTable
OID tdcName	1.3.6.1.4.1.42229.1.2.3.10.1.1.1	CoriantTypesNameIdentifier	read-only	User-defined name assigned to identify a specific tdc in the device
NUM tdcSupportingInputPort	1.3.6.1.4.1.42229.1.2.3.10.1.1.2	RowPointer	read-only	Identifier of the supporting input port.
NUM tdcSupportingOutputPort	1.3.6.1.4.1.42229.1.2.3.10.1.1.3	RowPointer	read-only	Identifier of the supporting output port.
INT tdcAdminStatus	1.3.6.1.4.1.42229.1.2.3.10.1.1.4	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT tdcOperStatus	1.3.6.1.4.1.42229.1.2.3.10.1.1.5	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT tdcAvailStatus	1.3.6.1.4.1.42229.1.2.3.10.1.1.6	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT tdcAliasName	1.3.6.1.4.1.42229.1.2.3.10.1.1.7	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
INT tdcMode	1.3.6.1.4.1.42229.1.2.3.10.1.1.8	INTEGER	read-only	Control mode of the tunable dispersion compensation; Manual: CD value will be decided per configured CD value; Auto: system will automatically decide the CD value per measured chromatic dispersion in the span. default value :auto
COR tdcReferenceFrequency	1.3.6.1.4.1.42229.1.2.3.10.1.1.9	CoriantTypesFreq	read-only	Indicating the reference wavelength of the TDC. UNITS:MHz
U32 tdcActualReferenceFrequency	1.3.6.1.4.1.42229.1.2.3.10.1.1.10	Unsigned32	read-only	Indicating the actual reference wavelength of the TDC. UNITS:MHz
U32 tdcFrequencyRangeMin	1.3.6.1.4.1.42229.1.2.3.10.1.1.11	Unsigned32	read-only	The minimum of supported wavelength. UNITS:MHz
U32 tdcFrequencyRangeMax	1.3.6.1.4.1.42229.1.2.3.10.1.1.12	Unsigned32	read-only	The maximum of supported wavelength. UNITS:MHz
INT tdcChromaticDispersion	1.3.6.1.4.1.42229.1.2.3.10.1.1.13	INTEGER	read-only	The setting value of Chromatic Dispersion. UNITS:ps/nm default value :0
INT tdcChromaticDispersionAdjustment	1.3.6.1.4.1.42229.1.2.3.10.1.1.14	INTEGER	read-only	The value will be used to adjust target chromatic dispersion by adding the value with auto decided dispersion in auto tdc mode. UNITS:ps/nm
INT tdcActualChromaticDispersion	1.3.6.1.4.1.42229.1.2.3.10.1.1.15	INTEGER	read-only	The actual value of Chromatic Dispersion. UNITS:ps/nm
INT tdcCdRangeMin	1.3.6.1.4.1.42229.1.2.3.10.1.1.16	INTEGER	read-only	The minimum of supported chromatic dispersion. UNITS:ps/nm
INT tdcCdRangeMax	1.3.6.1.4.1.42229.1.2.3.10.1.1.17	INTEGER	read-only	The maximum of supported chromatic dispersion. UNITS:ps/nm
inventory	1.3.6.1.4.1.42229.1.2.3.12
inventoryTable	1.3.6.1.4.1.42229.1.2.3.12.1		not-accessible	NULL
inventoryEntry	1.3.6.1.4.1.42229.1.2.3.12.1.1		not-accessible	Entry of inventoryTable
INT inventoryEquipmentType	1.3.6.1.4.1.42229.1.2.3.12.1.1.1	INTEGER	read-only	The equipment type that the inventory data refers to
COR inventoryShelfId	1.3.6.1.4.1.42229.1.2.3.12.1.1.2	CoriantTypesShelfId	read-only	Identifier of the shelf.
COR inventorySlotId	1.3.6.1.4.1.42229.1.2.3.12.1.1.3	CoriantTypesSlotId	read-only	Identifier of the slot.
COR inventorySubslotId	1.3.6.1.4.1.42229.1.2.3.12.1.1.4	CoriantTypesSlotId	read-only	Identifier of the subslot.
COR inventoryPortId	1.3.6.1.4.1.42229.1.2.3.12.1.1.5	CoriantTypesPortId	read-only	Identifier of the port.
OCT inventoryEquipmentVersion	1.3.6.1.4.1.42229.1.2.3.12.1.1.6	OCTET STRING	read-only	The attribute Identifies the Hardware Version of the module that populates the slot.
OCT inventoryModuleType	1.3.6.1.4.1.42229.1.2.3.12.1.1.7	OCTET STRING	read-only	This is the value of module type stored in EEPROM of the equipment.
OCT inventoryVendor	1.3.6.1.4.1.42229.1.2.3.12.1.1.8	OCTET STRING	read-only	Vendor information.
OCT inventorySerialNumber	1.3.6.1.4.1.42229.1.2.3.12.1.1.9	OCTET STRING	read-only	This is the value of serial number stored in EEPROM of the equipment.
OCT inventoryFwVersion	1.3.6.1.4.1.42229.1.2.3.12.1.1.10	OCTET STRING	read-only	Current Firmware (FW) version on the equipment.
OCT inventoryPartNumber	1.3.6.1.4.1.42229.1.2.3.12.1.1.11	OCTET STRING	read-only	Identifies the Part Number of the equipment.
OCT inventoryClei	1.3.6.1.4.1.42229.1.2.3.12.1.1.12	OCTET STRING	read-only	Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages. CLEI codes have 4 data elements: - Characters 1 to 4: Define family or subfamily of product. - Characters 5 to 7: Define features. - Character 8: Manufacturer and System ID. - Characters 9 and 10: Identifies version, issue, and release #.
OCT inventoryInterfaceType	1.3.6.1.4.1.42229.1.2.3.12.1.1.13	OCTET STRING	read-only	Indicating interface type of the pluggable. default value :
OCT inventoryManufactureDate	1.3.6.1.4.1.42229.1.2.3.12.1.1.14	OCTET STRING	read-only	The equipment manufacture date get from equipment. format is mm/dd/yyyy. When there is no date information show nothing Conditions:(../equipment-type = 'shelf') or (../equipment-type = 'card') or (../equipment-type = 'subcard') or (../equipment-type = 'pluggable') default value :
OCT inventoryManufacturerNumber	1.3.6.1.4.1.42229.1.2.3.12.1.1.16	OCTET STRING	read-only	This is the value of manufacturer number stored in EEPROM of the equipment.
led	1.3.6.1.4.1.42229.1.2.3.14
ledTable	1.3.6.1.4.1.42229.1.2.3.14.1		not-accessible	Attributes related with LED Applicable to Shelf, FAN, PSU, CHM1, CHM2, CHM1G, OCC2 in DCI.
ledEntry	1.3.6.1.4.1.42229.1.2.3.14.1.1		not-accessible	Entry of ledTable
OCT ledEquipmentType	1.3.6.1.4.1.42229.1.2.3.14.1.1.1	OCTET STRING	read-only	The attribute indicates the equipment type to identify the module. for example, if the card is CHM1, 'CHM1' shall be used. DCI supporting LEDs: CHM1, CHM2, SHELF, FAN
COR ledShelfId	1.3.6.1.4.1.42229.1.2.3.14.1.1.2	CoriantTypesShelfId	read-only	Identifier of the shelf.
COR ledSlotId	1.3.6.1.4.1.42229.1.2.3.14.1.1.3	CoriantTypesSlotId	read-only	Identifier of the slot.
OCT ledName	1.3.6.1.4.1.42229.1.2.3.14.1.1.4	OCTET STRING	read-only	The functional name of LED. DCI NE: location_led port(n)_led (CHM1: n = 1 to 6, CHM2 n = 1 to 12, e.g. Port12) active_led power_led fault_led status_led subslot(n)_led
INT ledStatus	1.3.6.1.4.1.42229.1.2.3.14.1.1.5	INTEGER	read-only	Current LED status. DCI NE: For Location_LED: OFF, BLINK For others: red, red-blink,green,green-blink,amber,amber-blink,off,notAvailable
COR ledSubslotId	1.3.6.1.4.1.42229.1.2.3.14.1.1.6	CoriantTypesSubslotId	read-only	Identifier of the subslot.
temperatureDetails	1.3.6.1.4.1.42229.1.2.3.15
temperatureDetailsTable	1.3.6.1.4.1.42229.1.2.3.15.1		not-accessible	The detailed information of temperature in each monitoring-point of current module
temperatureDetailsEntry	1.3.6.1.4.1.42229.1.2.3.15.1.1		not-accessible	Entry of temperatureDetailsTable
OCT temperatureDetailsMonitoringPoint	1.3.6.1.4.1.42229.1.2.3.15.1.1.1	OCTET STRING	read-only	The point of temperature monitoring. It could be the sensor or chip internal.
COR temperatureDetailsTemperature	1.3.6.1.4.1.42229.1.2.3.15.1.1.2	CoriantTypesTemperature	read-only	Temperature at the monitoring point.
COR temperatureDetailsTemperatureRangeLow	1.3.6.1.4.1.42229.1.2.3.15.1.1.3	CoriantTypesTemperature	read-only	The lowest temperature threshold of this monitoring point in working mode.
COR temperatureDetailsTemperatureRangeHigh	1.3.6.1.4.1.42229.1.2.3.15.1.1.4	CoriantTypesTemperature	read-only	The highest temperature threshold of this monitoring point in working mode.
otdr	1.3.6.1.4.1.42229.1.2.3.16
otdrTable	1.3.6.1.4.1.42229.1.2.3.16.1		not-accessible	Container of OTDR.
otdrEntry	1.3.6.1.4.1.42229.1.2.3.16.1.1		not-accessible	Entry of otdrTable
INT otdrState	1.3.6.1.4.1.42229.1.2.3.16.1.1.1	INTEGER	read-only	Indicating the current status of the OTDR. default value :not-available
U32 otdrMeasurementTime	1.3.6.1.4.1.42229.1.2.3.16.1.1.2	Unsigned32	read-only	Indicating the time remaining in current measurement running. UNITS:second default value :0
OCT otdrError	1.3.6.1.4.1.42229.1.2.3.16.1.1.3	OCTET STRING	read-only	Error message produced when the measurement ends with error.
INT otdrLaserStatus	1.3.6.1.4.1.42229.1.2.3.16.1.1.4	INTEGER	read-only	Indicating the current status of the OTDR laser. default value :not-available
U32 otdrMeasurementPort	1.3.6.1.4.1.42229.1.2.3.16.1.1.5	Unsigned32	read-only	0 indicates that the card is not measuring any port; non-zero indicates the OTDR port number where a measurement is currently taking place. default value :0
otdrPort	1.3.6.1.4.1.42229.1.2.3.18
otdrPortTable	1.3.6.1.4.1.42229.1.2.3.18.1		not-accessible	Containing attributes of OTDR port.
otdrPortEntry	1.3.6.1.4.1.42229.1.2.3.18.1.1		not-accessible	Entry of otdrPortTable
OTD otdrPortOtdrRange	1.3.6.1.4.1.42229.1.2.3.18.1.1.1	OtdrOtdrRange	read-only	OTDR measurement range. UNITS:km default value :auto
OTD otdrPortOtdrPulseWidth	1.3.6.1.4.1.42229.1.2.3.18.1.1.2	OtdrOtdrPulseWidth	read-only	Indicates pulse width to be used in otdr measurement. UNITS:nano-second default value :auto
INT otdrPortOtdrMeasurementSpeed	1.3.6.1.4.1.42229.1.2.3.18.1.1.3	INTEGER	read-only	Indicating OTDR measurement speed. default value :auto
OTD otdrPortOtdrIor	1.3.6.1.4.1.42229.1.2.3.18.1.1.4	OtdrOtdrIor	read-only	Specifies the group index of refraction (IOR) of the fiber to be measured. default value :auto
INT otdrPortOtdrFiberType	1.3.6.1.4.1.42229.1.2.3.18.1.1.5	INTEGER	read-only	Indicating fiber type to be measured. default value :auto
IET otdrPortOtdrLastMeasurement	1.3.6.1.4.1.42229.1.2.3.18.1.1.6	IetfYangTypesDateAndTime	read-only	Indicates the last otdr measurement date and time on the port. default value :0000-00-00T00:00:00Z
OCT otdrPortOtdrResolution	1.3.6.1.4.1.42229.1.2.3.18.1.1.7	OCTET STRING	read-only	Specifies the OTDR data sampling resolution. UNITS:meter default value :auto
ops	1.3.6.1.4.1.42229.1.2.3.20
opsTable	1.3.6.1.4.1.42229.1.2.3.20.1		not-accessible	The list of optical protection switch (ops) on an equipment.
opsEntry	1.3.6.1.4.1.42229.1.2.3.20.1.1		not-accessible	Entry of opsTable
OID opsName	1.3.6.1.4.1.42229.1.2.3.20.1.1.1	CoriantTypesNameIdentifier	read-only	The name assigned to identify a specific ops in the device
NUM opsWorkingEntity	1.3.6.1.4.1.42229.1.2.3.20.1.1.2	RowPointer	read-only	Identifier of the working port of the OPS.
NUM opsProtectionEntity	1.3.6.1.4.1.42229.1.2.3.20.1.1.3	RowPointer	read-only	Identifier of the protection port of the OPS
INT opsAdminStatus	1.3.6.1.4.1.42229.1.2.3.20.1.1.4	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT opsOperStatus	1.3.6.1.4.1.42229.1.2.3.20.1.1.5	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT opsAvailStatus	1.3.6.1.4.1.42229.1.2.3.20.1.1.6	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT opsAliasName	1.3.6.1.4.1.42229.1.2.3.20.1.1.7	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
INT opsProtectionStatus	1.3.6.1.4.1.42229.1.2.3.20.1.1.8	INTEGER	read-only	Indicates the status of the protection switch.
INT opsActivePath	1.3.6.1.4.1.42229.1.2.3.20.1.1.9	INTEGER	read-only	Indicating the active port of the protection switch. default value :unknown
COR opsRevertive	1.3.6.1.4.1.42229.1.2.3.20.1.1.10	CoriantTypesYesNo	read-only	Revertive behavior of the aps. If True, then automatically revert after protection switch once the fault is restored. default value :no
U32 opsWaitToRestore	1.3.6.1.4.1.42229.1.2.3.20.1.1.11	Unsigned32	read-only	Wait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately, after expiration of the timer, the working is restored and a norequest state is transmitted. UNITS:second default value :300
COR opsWorkingSwitchThreshold	1.3.6.1.4.1.42229.1.2.3.20.1.1.12	CoriantTypesOpticalPower	read-only	The switching threshold of the working port which indicates the optical power threshold of signal degrade. default value :-18.0
COR opsProtectionSwitchThreshold	1.3.6.1.4.1.42229.1.2.3.20.1.1.13	CoriantTypesOpticalPower	read-only	The switching threshold of the protection port which indicates the optical power threshold of signal degrade. default value :-18.0
COR opsWorkingLosThreshold	1.3.6.1.4.1.42229.1.2.3.20.1.1.14	CoriantTypesOpticalPower	read-only	The switching threshold of the working port, power level below it will lead to loss of signal. default value :-23.0
COR opsProtectionLosThreshold	1.3.6.1.4.1.42229.1.2.3.20.1.1.15	CoriantTypesOpticalPower	read-only	The switching threshold of the protection port, power level below it will lead to loss of signal. default value :-23.0
U32 opsHoldoffTimer	1.3.6.1.4.1.42229.1.2.3.20.1.1.16	Unsigned32	read-only	The hold off time of the protection switch. UNITS:milliseconds default value :0
INT opsWavelengthBand	1.3.6.1.4.1.42229.1.2.3.20.1.1.17	INTEGER	read-only	Specifies the band of the signal going through the optical protection switch unit. UNITS:nm default value :1550
subportStatistics	1.3.6.1.4.1.42229.1.2.3.25
subportStatisticsTable	1.3.6.1.4.1.42229.1.2.3.25.1		not-accessible	NULL
subportStatisticsEntry	1.3.6.1.4.1.42229.1.2.3.25.1.1		not-accessible	Entry of subportStatisticsTable
IET subportStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.3.25.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
portStatistics	1.3.6.1.4.1.42229.1.2.3.26
portStatisticsTable	1.3.6.1.4.1.42229.1.2.3.26.1		not-accessible	NULL
portStatisticsEntry	1.3.6.1.4.1.42229.1.2.3.26.1.1		not-accessible	Entry of portStatisticsTable
IET portStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.3.26.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
subcardStatistics	1.3.6.1.4.1.42229.1.2.3.27
subcardStatisticsTable	1.3.6.1.4.1.42229.1.2.3.27.1		not-accessible	NULL
subcardStatisticsEntry	1.3.6.1.4.1.42229.1.2.3.27.1.1		not-accessible	Entry of subcardStatisticsTable
IET subcardStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.3.27.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
cardStatistics	1.3.6.1.4.1.42229.1.2.3.28
cardStatisticsTable	1.3.6.1.4.1.42229.1.2.3.28.1		not-accessible	NULL
cardStatisticsEntry	1.3.6.1.4.1.42229.1.2.3.28.1.1		not-accessible	Entry of cardStatisticsTable
IET cardStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.3.28.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
shelfStatistics	1.3.6.1.4.1.42229.1.2.3.29
shelfStatisticsTable	1.3.6.1.4.1.42229.1.2.3.29.1		not-accessible	NULL
shelfStatisticsEntry	1.3.6.1.4.1.42229.1.2.3.29.1.1		not-accessible	Entry of shelfStatisticsTable
IET shelfStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.3.29.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
services	1.3.6.1.4.1.42229.1.2.4
otn	1.3.6.1.4.1.42229.1.2.4.1
eth10g	1.3.6.1.4.1.42229.1.2.4.1.1
eth10gTable	1.3.6.1.4.1.42229.1.2.4.1.1.1		not-accessible	Represents the 10GBE object.
eth10gEntry	1.3.6.1.4.1.42229.1.2.4.1.1.1.1		not-accessible	Entry of eth10gTable
COR eth10gEthFecType	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.1	CoriantTypesEthFec	read-only	The FEC working type of etyn port. default value :auto
COR eth10gEthFecTypeState	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.2	CoriantTypesEthFec	read-only	The FEC working state of etyn port. default value :disabled
U32 eth10gTransmitInterpacketgap	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.3	Unsigned32	read-only	Specifies the minimum transmit IPG value. default value :8
COR eth10gGfpPayloadFcs	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.4	CoriantTypesEnableSwitch	read-only	Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled
INT eth10gMappingMode	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.5	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT eth10gAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.6	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT eth10gOperStatus	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.7	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT eth10gAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.8	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT eth10gAliasName	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.9	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR eth10gClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.10	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 eth10gClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.11	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR eth10gNearEndAls	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.12	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR eth10gAlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.13	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR eth10gLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.14	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT eth10gLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.15	INTEGER	read-only	The type mode of loopback function default value :none
COR eth10gTestSignalType	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.16	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR eth10gTestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.17	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT eth10gServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.18	OCTET STRING	read-only	Path/service name of cross-connection related facility.
INT eth10gLldpStatusIf	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.19	INTEGER	read-only	Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
INT eth10gUpiValue	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.20	INTEGER	read-only	The value of ODU2 upi in PREAMBLE mapping mode. default value :not-applicable
COR eth10gHoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.1.1.1.21	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
testSignalFacilityStatus	1.3.6.1.4.1.42229.1.2.4.1.2
testSignalFacilityStatusTable	1.3.6.1.4.1.42229.1.2.4.1.2.1		not-accessible	Test signal status for current facility.
testSignalFacilityStatusEntry	1.3.6.1.4.1.42229.1.2.4.1.2.1.1		not-accessible	Entry of testSignalFacilityStatusTable
INT testSignalFacilityStatusPrbsSync	1.3.6.1.4.1.42229.1.2.4.1.2.1.1.1	INTEGER	read-only	The test result of PRBS Synchronization default value :not-applicable
U32 testSignalFacilityStatusTestTimeDuration	1.3.6.1.4.1.42229.1.2.4.1.2.1.1.2	Unsigned32	read-only	The time duration of signal test UNITS:seconds
NUM testSignalFacilityStatusPrbsBitErrorCount	1.3.6.1.4.1.42229.1.2.4.1.2.1.1.3	IetfYangTypesGauge64	read-only	The counting of bit error by PRBS Synchronization
lldpRemoteSystem	1.3.6.1.4.1.42229.1.2.4.1.3
lldpRemoteSystemTable	1.3.6.1.4.1.42229.1.2.4.1.3.1		not-accessible	List of LLDP neighbors.
lldpRemoteSystemEntry	1.3.6.1.4.1.42229.1.2.4.1.3.1.1		not-accessible	Entry of lldpRemoteSystemTable
U32 lldpRemoteSystemLldpRemoteIndex	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.1	Unsigned32	read-only	This attribute represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.
INT lldpRemoteSystemRemoteChassisIdSubtype	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.2	INTEGER	read-only	This attribute describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value.
OCT lldpRemoteSystemRemoteChassisId	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.3	OCTET STRING	read-only	This attribute describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instance. If the associated LldpChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated LldpChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated LldpChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated LldpChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated LldpChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID.
INT lldpRemoteSystemRemotePortIdSubtype	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.4	INTEGER	read-only	This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
OCT lldpRemoteSystemRemotePortId	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.5	OCTET STRING	read-only	This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
OCT lldpRemoteSystemRemotePortDesc	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.6	OCTET STRING	read-only	The string value used to identify the description of the given port associated with the remote system.
OCT lldpRemoteSystemRemoteSysName	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.7	OCTET STRING	read-only	The string value used to identify the system name of the remote system. sys-name: system name
OCT lldpRemoteSystemRemoteSysDesc	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.8	OCTET STRING	read-only	The string value used to identify the system description of the remote system. sys-desc: system description
LLD lldpRemoteSystemRemoteSysCapSupported	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.9	LldpLldpSysCap	read-only	This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality. sys-cap-supported: supported system capability
LLD lldpRemoteSystemRemoteSysCapEnabled	1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10	LldpLldpSysCap	read-only	This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality.
remoteManAddresses	1.3.6.1.4.1.42229.1.2.4.1.4
remoteManAddressesTable	1.3.6.1.4.1.42229.1.2.4.1.4.1		not-accessible	List of management addresses of LLDP neighbor. man:managment, remote management addresses
remoteManAddressesEntry	1.3.6.1.4.1.42229.1.2.4.1.4.1.1		not-accessible	Entry of remoteManAddressesTable
U32 remoteManAddressesRemoteManAddrSubtype	1.3.6.1.4.1.42229.1.2.4.1.4.1.1.1	Unsigned32	read-only	The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.
OCT remoteManAddressesRemoteManAddr	1.3.6.1.4.1.42229.1.2.4.1.4.1.1.2	OCTET STRING	read-only	The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity. man: management addr: address
U32 remoteManAddressesRemoteManAddrIfSubtype	1.3.6.1.4.1.42229.1.2.4.1.4.1.1.3	Unsigned32	read-only	This attribute describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' represents interface identifier based on the ifIndex MIB object. The enumeration 'systemPortNumber(3)' represents interface identifier based on the system port numbering convention. man: management addr: address
U32 remoteManAddressesRemoteManAddrIfId	1.3.6.1.4.1.42229.1.2.4.1.4.1.1.4	Unsigned32	read-only	The integer value used to identify the interface number regarding the management address component associated with the remote system. man: management addr: address
OCT remoteManAddressesRemoteManAddrOid	1.3.6.1.4.1.42229.1.2.4.1.4.1.1.5	OCTET STRING	read-only	The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. man: management addr: address oid: object identifier
odu	1.3.6.1.4.1.42229.1.2.4.1.5
oduTable	1.3.6.1.4.1.42229.1.2.4.1.5.1		not-accessible	NULL
oduEntry	1.3.6.1.4.1.42229.1.2.4.1.5.1.1		not-accessible	Entry of oduTable
COR odutypeL1	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.1	CoriantTypesOduType	read-only	Level 1 ODU type
U32 oduidL1	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.2	Unsigned32	read-only	Identifier of level 1 ODU
COR odutypeL2	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.3	CoriantTypesOduType	read-only	Level 2 ODU type
U32 oduidL2	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.4	Unsigned32	read-only	Identifier of level 2 ODU
COR odutypeL3	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.5	CoriantTypesOduType	read-only	Level 3 ODU type
U32 oduidL3	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.6	Unsigned32	read-only	Identifier of level 3 ODU
COR odutypeL4	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.7	CoriantTypesOduType	read-only	Level 4 ODU type
U32 oduidL4	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.8	Unsigned32	read-only	Identifier of level 4 ODU
INT oduAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.9	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT oduOperStatus	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.10	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT oduAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.11	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT oduAliasName	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.12	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OCT oduServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.13	OCTET STRING	read-only	Path/service name of cross-connection related facility.
COR oduTribSlot	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.14	CoriantTypesNumberList	read-only	Tributary slots of ODU, range 1 to 80
OCT oduRxPayloadType	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.15	OCTET STRING	read-only	Received payload-type of ODU
OCT oduTxPayloadType	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.16	OCTET STRING	read-only	Transmitter payload-type of ODU
COR oduNimEnable	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.17	CoriantTypesEnableSwitch	read-only	The enable switching of nim function default value :enabled
COR oduDelayMeasurementEnable	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.18	CoriantTypesEnableSwitch	read-only	The enable switching of delay-measurement function default value :disabled
INT oduOpuConfigActual	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.19	INTEGER	read-only	The actual opu configuration type default value :not-applicable
INT oduClientSignalType	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.20	INTEGER	read-only	The ODUflex rate for special signal type default value :not-applicable
OCT oduExpSapi	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.21	OCTET STRING	read-only	The expected sapi(Source Access Point Identifier)
OCT oduExpDapi	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.22	OCTET STRING	read-only	The expected dapi(Destination Access Point Identifier)
OCT oduExpOperator	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.23	OCTET STRING	read-only	The expected operator TTI
OCT oduTxSapi	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.24	OCTET STRING	read-only	The transmitter sapi(Source Access Point Identifier)
OCT oduTxDapi	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.25	OCTET STRING	read-only	The transmitter dapi(Destination Access Point Identifier)
OCT oduTxOperator	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.26	OCTET STRING	read-only	The transmitter operator TTI
COR oduTimDefectMode	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.27	CoriantTypesTimMode	read-only	The tim defect selection mode default value :NONE
COR oduTimAct	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.28	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
OCT oduRxSapi	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.29	OCTET STRING	read-only	The received sapi(Source Access Point Identifier)
OCT oduRxDapi	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.30	OCTET STRING	read-only	The received dapi(Destination Access Point Identifier)
OCT oduRxOperator	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.31	OCTET STRING	read-only	The received operator TTI
U32 oduDegradeInterval	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.32	Unsigned32	read-only	The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
U32 oduDegradeThreshold	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.33	Unsigned32	read-only	The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
COR oduTestSignalType	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.34	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR oduTestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.35	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
INT oduTerminationMode	1.3.6.1.4.1.42229.1.2.4.1.5.1.1.36	INTEGER	read-only	Termination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation default value :terminated
oduEncryption	1.3.6.1.4.1.42229.1.2.4.1.6
oduEncryptionTable	1.3.6.1.4.1.42229.1.2.4.1.6.1		not-accessible	Encryption function for the ODU channel.
oduEncryptionEntry	1.3.6.1.4.1.42229.1.2.4.1.6.1.1		not-accessible	Entry of oduEncryptionTable
INT oduEncryptionEncryptionEnable	1.3.6.1.4.1.42229.1.2.4.1.6.1.1.1	INTEGER	read-only	Setting AES-256 encryption on OTN default value :disabled
INT oduEncryptionBlockCipherMode	1.3.6.1.4.1.42229.1.2.4.1.6.1.1.2	INTEGER	read-only	Specifies the block cipher mode of operation. default value :CTR
U32 oduEncryptionEncryptionInterval	1.3.6.1.4.1.42229.1.2.4.1.6.1.1.3	Unsigned32	read-only	The encryption key rotation interval (in minutes) UNITS:minutes default value :30
COR oduEncryptionEncryptionTxStatus	1.3.6.1.4.1.42229.1.2.4.1.6.1.1.4	CoriantCommonOtnEncryStatusEnum	read-only	The encryption status at transmit side of the ODU, which reflects the status of both encryption data and communication sessions.
COR oduEncryptionEncryptionRxStatus	1.3.6.1.4.1.42229.1.2.4.1.6.1.1.5	CoriantCommonOtnEncryStatusEnum	read-only	The encryption status at receive side of the ODU, which reflects the status of both encryption data and communication sessions.
COR oduEncryptionOduKeySyncSession	1.3.6.1.4.1.42229.1.2.4.1.6.1.1.6	CoriantCommonOtnKeySyncSession	read-only	Indicate the associated session for the ODU channel to synchronize keys. default value :none
OCT oduEncryptionEncryptionTxChannelId	1.3.6.1.4.1.42229.1.2.4.1.6.1.1.7	OCTET STRING	read-only	Specify channel identifier of the encrypted ODU, which shall be unique within the NE.
U32 oduEncryptionTimeToNextKey	1.3.6.1.4.1.42229.1.2.4.1.6.1.1.8	Unsigned32	read-only	The time left to rotate the ODU encryption key. UNITS:seconds default value :0
testSignalStatus	1.3.6.1.4.1.42229.1.2.4.1.7
testSignalStatusTable	1.3.6.1.4.1.42229.1.2.4.1.7.1		not-accessible	Test signal status on ODU
testSignalStatusEntry	1.3.6.1.4.1.42229.1.2.4.1.7.1.1		not-accessible	Entry of testSignalStatusTable
INT testSignalStatusPrbsSync	1.3.6.1.4.1.42229.1.2.4.1.7.1.1.1	INTEGER	read-only	The test result of PRBS Synchronization default value :not-applicable
U32 testSignalStatusTestTimeDuration	1.3.6.1.4.1.42229.1.2.4.1.7.1.1.2	Unsigned32	read-only	The time duration of signal test UNITS:seconds
NUM testSignalStatusPrbsBitErrorCount	1.3.6.1.4.1.42229.1.2.4.1.7.1.1.3	IetfYangTypesGauge64	read-only	The counting of bit error by PRBS Synchronization
eth40g	1.3.6.1.4.1.42229.1.2.4.1.8
eth40gTable	1.3.6.1.4.1.42229.1.2.4.1.8.1		not-accessible	Represents the 40GBE object.
eth40gEntry	1.3.6.1.4.1.42229.1.2.4.1.8.1.1		not-accessible	Entry of eth40gTable
COR eth40gEthFecType	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.1	CoriantTypesEthFec	read-only	The FEC working type of etyn port. default value :auto
COR eth40gEthFecTypeState	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.2	CoriantTypesEthFec	read-only	The FEC working state of etyn port. default value :disabled
U32 eth40gTransmitInterpacketgap	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.3	Unsigned32	read-only	Specifies the minimum transmit IPG value. default value :8
COR eth40gGfpPayloadFcs	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.4	CoriantTypesEnableSwitch	read-only	Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled
INT eth40gMappingMode	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.5	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT eth40gAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.6	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT eth40gOperStatus	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT eth40gAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.8	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT eth40gAliasName	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.9	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR eth40gClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.10	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 eth40gClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.11	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR eth40gNearEndAls	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.12	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR eth40gAlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.13	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR eth40gLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.14	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT eth40gLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.15	INTEGER	read-only	The type mode of loopback function default value :none
COR eth40gTestSignalType	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.16	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR eth40gTestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.17	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT eth40gServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.18	OCTET STRING	read-only	Path/service name of cross-connection related facility.
INT eth40gLldpStatusIf	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.19	INTEGER	read-only	Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
COR eth40gHoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.8.1.1.20	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
eth100g	1.3.6.1.4.1.42229.1.2.4.1.9
eth100gTable	1.3.6.1.4.1.42229.1.2.4.1.9.1		not-accessible	Represents the 100GBE object.
eth100gEntry	1.3.6.1.4.1.42229.1.2.4.1.9.1.1		not-accessible	Entry of eth100gTable
COR eth100gEthFecType	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.1	CoriantTypesEthFec	read-only	The FEC working type of etyn port. default value :auto
COR eth100gEthFecTypeState	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.2	CoriantTypesEthFec	read-only	The FEC working state of etyn port. default value :disabled
U32 eth100gTransmitInterpacketgap	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.3	Unsigned32	read-only	Specifies the minimum transmit IPG value. default value :8
COR eth100gGfpPayloadFcs	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.4	CoriantTypesEnableSwitch	read-only	Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled
INT eth100gMappingMode	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.5	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT eth100gAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.6	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT eth100gOperStatus	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.7	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT eth100gAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.8	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT eth100gAliasName	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.9	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR eth100gClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.10	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 eth100gClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.11	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR eth100gNearEndAls	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.12	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR eth100gAlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.13	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR eth100gLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.14	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT eth100gLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.15	INTEGER	read-only	The type mode of loopback function default value :none
COR eth100gTestSignalType	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.16	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR eth100gTestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.17	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT eth100gServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.18	OCTET STRING	read-only	Path/service name of cross-connection related facility.
INT eth100gLldpStatusIf	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.19	INTEGER	read-only	Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
COR eth100gHoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.9.1.1.20	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
otu4	1.3.6.1.4.1.42229.1.2.4.1.10
otu4Table	1.3.6.1.4.1.42229.1.2.4.1.10.1		not-accessible	Represents the otu4 object
otu4Entry	1.3.6.1.4.1.42229.1.2.4.1.10.1.1		not-accessible	Entry of otu4Table
COR otu4FecType	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.1	CoriantTypesOtukFec	read-only	The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
INT otu4AdminStatus	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT otu4OperStatus	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT otu4AvailStatus	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT otu4AliasName	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OCT otu4ServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.6	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT otu4ExpSapi	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.7	OCTET STRING	read-only	The expected sapi(Source Access Point Identifier)
OCT otu4ExpDapi	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.8	OCTET STRING	read-only	The expected dapi(Destination Access Point Identifier)
OCT otu4ExpOperator	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.9	OCTET STRING	read-only	The expected operator TTI
OCT otu4TxSapi	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.10	OCTET STRING	read-only	The transmitter sapi(Source Access Point Identifier)
OCT otu4TxDapi	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.11	OCTET STRING	read-only	The transmitter dapi(Destination Access Point Identifier)
OCT otu4TxOperator	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.12	OCTET STRING	read-only	The transmitter operator TTI
COR otu4TimDefectMode	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.13	CoriantTypesTimMode	read-only	The tim defect selection mode default value :NONE
COR otu4TimAct	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.14	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
OCT otu4RxSapi	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.15	OCTET STRING	read-only	The received sapi(Source Access Point Identifier)
OCT otu4RxDapi	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.16	OCTET STRING	read-only	The received dapi(Destination Access Point Identifier)
OCT otu4RxOperator	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.17	OCTET STRING	read-only	The received operator TTI
U32 otu4DegradeInterval	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.18	Unsigned32	read-only	The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
U32 otu4DegradeThreshold	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.19	Unsigned32	read-only	The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
COR otu4LoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.20	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT otu4LoopbackType	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.21	INTEGER	read-only	The type mode of loopback function default value :none
COR otu4ClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.22	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 otu4ClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.23	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR otu4HoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.24	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
COR otu4NearEndAls	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.25	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR otu4AlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.10.1.1.26	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
otu2	1.3.6.1.4.1.42229.1.2.4.1.11
otu2Table	1.3.6.1.4.1.42229.1.2.4.1.11.1		not-accessible	Represents the otu2 object
otu2Entry	1.3.6.1.4.1.42229.1.2.4.1.11.1.1		not-accessible	Entry of otu2Table
COR otu2FecType	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.1	CoriantTypesOtukFec	read-only	The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
INT otu2AdminStatus	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT otu2OperStatus	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT otu2AvailStatus	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT otu2AliasName	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OCT otu2ServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.6	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT otu2ExpSapi	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.7	OCTET STRING	read-only	The expected sapi(Source Access Point Identifier)
OCT otu2ExpDapi	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.8	OCTET STRING	read-only	The expected dapi(Destination Access Point Identifier)
OCT otu2ExpOperator	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.9	OCTET STRING	read-only	The expected operator TTI
OCT otu2TxSapi	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.10	OCTET STRING	read-only	The transmitter sapi(Source Access Point Identifier)
OCT otu2TxDapi	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.11	OCTET STRING	read-only	The transmitter dapi(Destination Access Point Identifier)
OCT otu2TxOperator	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.12	OCTET STRING	read-only	The transmitter operator TTI
COR otu2TimDefectMode	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.13	CoriantTypesTimMode	read-only	The tim defect selection mode default value :NONE
COR otu2TimAct	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.14	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
OCT otu2RxSapi	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.15	OCTET STRING	read-only	The received sapi(Source Access Point Identifier)
OCT otu2RxDapi	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.16	OCTET STRING	read-only	The received dapi(Destination Access Point Identifier)
OCT otu2RxOperator	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.17	OCTET STRING	read-only	The received operator TTI
U32 otu2DegradeInterval	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.18	Unsigned32	read-only	The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
U32 otu2DegradeThreshold	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.19	Unsigned32	read-only	The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
COR otu2LoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.20	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT otu2LoopbackType	1.3.6.1.4.1.42229.1.2.4.1.11.1.1.21	INTEGER	read-only	The type mode of loopback function default value :none
otu2e	1.3.6.1.4.1.42229.1.2.4.1.12
otu2eTable	1.3.6.1.4.1.42229.1.2.4.1.12.1		not-accessible	Represents the otu2e object
otu2eEntry	1.3.6.1.4.1.42229.1.2.4.1.12.1.1		not-accessible	Entry of otu2eTable
COR otu2eFecType	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.1	CoriantTypesOtukFec	read-only	The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
INT otu2eAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT otu2eOperStatus	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT otu2eAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT otu2eAliasName	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OCT otu2eServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.6	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT otu2eExpSapi	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.7	OCTET STRING	read-only	The expected sapi(Source Access Point Identifier)
OCT otu2eExpDapi	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.8	OCTET STRING	read-only	The expected dapi(Destination Access Point Identifier)
OCT otu2eExpOperator	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.9	OCTET STRING	read-only	The expected operator TTI
OCT otu2eTxSapi	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.10	OCTET STRING	read-only	The transmitter sapi(Source Access Point Identifier)
OCT otu2eTxDapi	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.11	OCTET STRING	read-only	The transmitter dapi(Destination Access Point Identifier)
OCT otu2eTxOperator	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.12	OCTET STRING	read-only	The transmitter operator TTI
COR otu2eTimDefectMode	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.13	CoriantTypesTimMode	read-only	The tim defect selection mode default value :NONE
COR otu2eTimAct	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.14	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
OCT otu2eRxSapi	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.15	OCTET STRING	read-only	The received sapi(Source Access Point Identifier)
OCT otu2eRxDapi	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.16	OCTET STRING	read-only	The received dapi(Destination Access Point Identifier)
OCT otu2eRxOperator	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.17	OCTET STRING	read-only	The received operator TTI
U32 otu2eDegradeInterval	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.18	Unsigned32	read-only	The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
U32 otu2eDegradeThreshold	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.19	Unsigned32	read-only	The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
COR otu2eLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.20	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT otu2eLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.12.1.1.21	INTEGER	read-only	The type mode of loopback function default value :none
fc8g	1.3.6.1.4.1.42229.1.2.4.1.13
fc8gTable	1.3.6.1.4.1.42229.1.2.4.1.13.1		not-accessible	Represents the FC8G object.
fc8gEntry	1.3.6.1.4.1.42229.1.2.4.1.13.1.1		not-accessible	Entry of fc8gTable
INT fc8gMappingMode	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.1	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT fc8gAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT fc8gOperStatus	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT fc8gAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT fc8gAliasName	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR fc8gClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.6	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 fc8gClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.7	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR fc8gNearEndAls	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.8	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR fc8gAlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.9	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR fc8gLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.10	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT fc8gLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.11	INTEGER	read-only	The type mode of loopback function default value :none
COR fc8gTestSignalType	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.12	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR fc8gTestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.13	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT fc8gServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.14	OCTET STRING	read-only	Path/service name of cross-connection related facility.
COR fc8gHoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.13.1.1.15	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
fc16g	1.3.6.1.4.1.42229.1.2.4.1.14
fc16gTable	1.3.6.1.4.1.42229.1.2.4.1.14.1		not-accessible	Represents the FC16G object.
fc16gEntry	1.3.6.1.4.1.42229.1.2.4.1.14.1.1		not-accessible	Entry of fc16gTable
INT fc16gMappingMode	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.1	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT fc16gAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT fc16gOperStatus	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT fc16gAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT fc16gAliasName	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR fc16gClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.6	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 fc16gClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.7	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR fc16gNearEndAls	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.8	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR fc16gAlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.9	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR fc16gLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.10	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT fc16gLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.11	INTEGER	read-only	The type mode of loopback function default value :none
COR fc16gTestSignalType	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.12	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR fc16gTestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.13	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT fc16gServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.14	OCTET STRING	read-only	Path/service name of cross-connection related facility.
COR fc16gHoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.14.1.1.15	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
oc192	1.3.6.1.4.1.42229.1.2.4.1.15
oc192Table	1.3.6.1.4.1.42229.1.2.4.1.15.1		not-accessible	Represents the OC192 object.
oc192Entry	1.3.6.1.4.1.42229.1.2.4.1.15.1.1		not-accessible	Entry of oc192Table
INT oc192MappingMode	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.1	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT oc192AdminStatus	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT oc192OperStatus	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT oc192AvailStatus	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT oc192AliasName	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR oc192ClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.6	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 oc192ClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.7	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR oc192NearEndAls	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.8	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR oc192AlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.9	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR oc192LoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.10	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT oc192LoopbackType	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.11	INTEGER	read-only	The type mode of loopback function default value :none
COR oc192TestSignalType	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.12	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR oc192TestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.13	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT oc192ServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.14	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT oc192ExpTrc	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.15	OCTET STRING	read-only	The expected trc(trail trace identification)
OCT oc192TxTrc	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.16	OCTET STRING	read-only	The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
OCT oc192RxTrc	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.17	OCTET STRING	read-only	The received trc(trail trace identification)
COR oc192TimAct	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.18	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
COR oc192TimMonitor	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.19	CoriantTypesEnableSwitch	read-only	The enable switching of tim defect monitor mode default value :disabled
INT oc192AisType	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.20	INTEGER	read-only	NULL default value :Generic-AIS
COR oc192HoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.15.1.1.21	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
stm64	1.3.6.1.4.1.42229.1.2.4.1.16
stm64Table	1.3.6.1.4.1.42229.1.2.4.1.16.1		not-accessible	Represents the STM64 object.
stm64Entry	1.3.6.1.4.1.42229.1.2.4.1.16.1.1		not-accessible	Entry of stm64Table
INT stm64MappingMode	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.1	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT stm64AdminStatus	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT stm64OperStatus	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT stm64AvailStatus	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT stm64AliasName	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR stm64ClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.6	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 stm64ClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.7	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR stm64NearEndAls	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.8	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR stm64AlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.9	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR stm64LoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.10	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT stm64LoopbackType	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.11	INTEGER	read-only	The type mode of loopback function default value :none
COR stm64TestSignalType	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.12	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR stm64TestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.13	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT stm64ServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.14	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT stm64ExpTrc	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.15	OCTET STRING	read-only	The expected trc(trail trace identification)
OCT stm64TxTrc	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.16	OCTET STRING	read-only	The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
OCT stm64RxTrc	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.17	OCTET STRING	read-only	The received trc(trail trace identification)
COR stm64TimAct	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.18	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
COR stm64TimMonitor	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.19	CoriantTypesEnableSwitch	read-only	The enable switching of tim defect monitor mode default value :disabled
INT stm64AisType	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.20	INTEGER	read-only	NULL default value :Generic-AIS
COR stm64HoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.16.1.1.21	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
otuc2	1.3.6.1.4.1.42229.1.2.4.1.17
otuc2Table	1.3.6.1.4.1.42229.1.2.4.1.17.1		not-accessible	Represents the otuc2 object
otuc2Entry	1.3.6.1.4.1.42229.1.2.4.1.17.1.1		not-accessible	Entry of otuc2Table
COR otuc2FecType	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.1	CoriantTypesOtukFec	read-only	The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
INT otuc2AdminStatus	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT otuc2OperStatus	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT otuc2AvailStatus	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT otuc2AliasName	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OCT otuc2ServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.6	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT otuc2ExpSapi	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.7	OCTET STRING	read-only	The expected sapi(Source Access Point Identifier)
OCT otuc2ExpDapi	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.8	OCTET STRING	read-only	The expected dapi(Destination Access Point Identifier)
OCT otuc2ExpOperator	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.9	OCTET STRING	read-only	The expected operator TTI
OCT otuc2TxSapi	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.10	OCTET STRING	read-only	The transmitter sapi(Source Access Point Identifier)
OCT otuc2TxDapi	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.11	OCTET STRING	read-only	The transmitter dapi(Destination Access Point Identifier)
OCT otuc2TxOperator	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.12	OCTET STRING	read-only	The transmitter operator TTI
COR otuc2TimDefectMode	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.13	CoriantTypesTimMode	read-only	The tim defect selection mode default value :NONE
COR otuc2TimAct	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.14	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
OCT otuc2RxSapi	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.15	OCTET STRING	read-only	The received sapi(Source Access Point Identifier)
OCT otuc2RxDapi	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.16	OCTET STRING	read-only	The received dapi(Destination Access Point Identifier)
OCT otuc2RxOperator	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.17	OCTET STRING	read-only	The received operator TTI
U32 otuc2DegradeInterval	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.18	Unsigned32	read-only	The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
U32 otuc2DegradeThreshold	1.3.6.1.4.1.42229.1.2.4.1.17.1.1.19	Unsigned32	read-only	The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
otuc3	1.3.6.1.4.1.42229.1.2.4.1.18
otuc3Table	1.3.6.1.4.1.42229.1.2.4.1.18.1		not-accessible	Represents the otuc3 object
otuc3Entry	1.3.6.1.4.1.42229.1.2.4.1.18.1.1		not-accessible	Entry of otuc3Table
COR otuc3FecType	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.1	CoriantTypesOtukFec	read-only	The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
INT otuc3AdminStatus	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT otuc3OperStatus	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT otuc3AvailStatus	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT otuc3AliasName	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OCT otuc3ServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.6	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT otuc3ExpSapi	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.7	OCTET STRING	read-only	The expected sapi(Source Access Point Identifier)
OCT otuc3ExpDapi	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.8	OCTET STRING	read-only	The expected dapi(Destination Access Point Identifier)
OCT otuc3ExpOperator	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.9	OCTET STRING	read-only	The expected operator TTI
OCT otuc3TxSapi	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.10	OCTET STRING	read-only	The transmitter sapi(Source Access Point Identifier)
OCT otuc3TxDapi	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.11	OCTET STRING	read-only	The transmitter dapi(Destination Access Point Identifier)
OCT otuc3TxOperator	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.12	OCTET STRING	read-only	The transmitter operator TTI
COR otuc3TimDefectMode	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.13	CoriantTypesTimMode	read-only	The tim defect selection mode default value :NONE
COR otuc3TimAct	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.14	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
OCT otuc3RxSapi	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.15	OCTET STRING	read-only	The received sapi(Source Access Point Identifier)
OCT otuc3RxDapi	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.16	OCTET STRING	read-only	The received dapi(Destination Access Point Identifier)
OCT otuc3RxOperator	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.17	OCTET STRING	read-only	The received operator TTI
U32 otuc3DegradeInterval	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.18	Unsigned32	read-only	The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
U32 otuc3DegradeThreshold	1.3.6.1.4.1.42229.1.2.4.1.18.1.1.19	Unsigned32	read-only	The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
ochOs	1.3.6.1.4.1.42229.1.2.4.1.19
ochOsTable	1.3.6.1.4.1.42229.1.2.4.1.19.1		not-accessible	Represents the och-os MO
ochOsEntry	1.3.6.1.4.1.42229.1.2.4.1.19.1.1		not-accessible	Entry of ochOsTable
INT ochOsModulationFormat	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.1	INTEGER	read-only	Currently och-os modulation format
INT ochOsLineEncoding	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.2	INTEGER	read-only	Currently line-encoding mode
COR ochOsFrequency	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.3	CoriantTypesFreq	read-only	The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only. UNITS:MHz default value :0
COR ochOsActualFrequency	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.4	CoriantTypesFreq	read-only	The actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0
COR ochOsRxFrequency	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.5	CoriantTypesFreq	read-only	The rx laser frequency. Special for 0 means it is same as tx laser frequency. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0
COR ochOsActualRxFrequency	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.6	CoriantTypesFreq	read-only	The actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and Rx. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0
COR ochOsLaserEnable	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.7	CoriantTypesEnableSwitch	read-only	The enable switching of output laser. default value :disabled
COR ochOsRequiredTxOpticalPower	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.8	CoriantTypesOpticalPower	read-only	This is to support adjustable optical power of Line side. default value :1.0
COR ochOsActualTxOpticalPower	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.9	CoriantTypesOpticalPower	read-only	This is the actual transmitting optical power of Line side. default value :-99.0
COR ochOsFecType	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.10	CoriantTypesOtukFec	read-only	The FEC type of och-os default value :SDFEC25
COR ochOsRxAttenuation	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.11	CoriantTypesOpticalDB	read-only	This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default value :0.0
OCT ochOsTxFilterRollOff	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.12	OCTET STRING	read-only	Transmitter filter roll off factor. default value :0.2
COR ochOsPreemphasis	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.13	CoriantTypesEnableSwitch	read-only	Preemphasis of transmitted signal. default value :enabled
OCT ochOsPreemphasisValue	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.14	OCTET STRING	read-only	Preemphasis of transmitted signal. default value :1.0
INT ochOsAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.15	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT ochOsOperStatus	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.16	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT ochOsAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.17	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT ochOsAliasName	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.18	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR ochOsLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.19	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT ochOsLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.20	INTEGER	read-only	The type mode of loopback function default value :none
OCT ochOsServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.21	OCTET STRING	read-only	Path/service name of cross-connection related facility.
U32 ochOsDGD	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.22	Unsigned32	read-only	Value of Differential Group Delay UNITS:ps
INT ochOsCD	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.23	INTEGER	read-only	Value of Chromatic Dispersion UNITS:ps/nm
COR ochOsOSNR	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.24	CoriantTypesOpticalDB	read-only	Current value of OSNR. The result could be OSNR value with dB
COR ochOsQFactor	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.25	CoriantTypesOpticalDB	read-only	Current value of Q-factor
OCT ochOsPreFecBer	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.26	OCTET STRING	read-only	Current value of PreFEC Bit Error Ratio. default value :-99.0
INT ochOsCdRangeLow	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.27	INTEGER	read-only	low value of chromatic dispersion search range. UNITS:ps/nm default value :-45000
INT ochOsCdRangeHigh	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.28	INTEGER	read-only	high value of chromatic dispersion search range. UNITS:ps/nm default value :45000
COR ochOsPropagateShutdown	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.29	CoriantTypesYesNo	read-only	When the attribute value is set to yes, the transmit laser will be shutdown if the whole service of the direction has signal failure, the function mainly used in regeneration node to propagate signal failure as LOS. default value :no
COR ochOsFastSopMode	1.3.6.1.4.1.42229.1.2.4.1.19.1.1.31	CoriantTypesEnableSwitch	read-only	Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default value :disabled
wan10gSonet	1.3.6.1.4.1.42229.1.2.4.1.30
wan10gSonetTable	1.3.6.1.4.1.42229.1.2.4.1.30.1		not-accessible	Represents the 10GWAN_SONET object.
wan10gSonetEntry	1.3.6.1.4.1.42229.1.2.4.1.30.1.1		not-accessible	Entry of wan10gSonetTable
INT wan10gSonetMappingMode	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.1	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT wan10gSonetAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT wan10gSonetOperStatus	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT wan10gSonetAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT wan10gSonetAliasName	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR wan10gSonetClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.6	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 wan10gSonetClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.7	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR wan10gSonetHoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.8	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
COR wan10gSonetNearEndAls	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.9	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR wan10gSonetAlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.10	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR wan10gSonetLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.11	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT wan10gSonetLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.12	INTEGER	read-only	The type mode of loopback function default value :none
COR wan10gSonetTestSignalType	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.13	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR wan10gSonetTestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.14	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT wan10gSonetServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.15	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT wan10gSonetExpTrc	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.16	OCTET STRING	read-only	The expected trc(trail trace identification)
OCT wan10gSonetTxTrc	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.17	OCTET STRING	read-only	The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
OCT wan10gSonetRxTrc	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.18	OCTET STRING	read-only	The received trc(trail trace identification)
COR wan10gSonetTimAct	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.19	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
COR wan10gSonetTimMonitor	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.20	CoriantTypesEnableSwitch	read-only	The enable switching of tim defect monitor mode default value :disabled
INT wan10gSonetAisType	1.3.6.1.4.1.42229.1.2.4.1.30.1.1.21	INTEGER	read-only	NULL default value :Generic-AIS
wan10gSdh	1.3.6.1.4.1.42229.1.2.4.1.31
wan10gSdhTable	1.3.6.1.4.1.42229.1.2.4.1.31.1		not-accessible	Represents the 10GWAN_SDH object.
wan10gSdhEntry	1.3.6.1.4.1.42229.1.2.4.1.31.1.1		not-accessible	Entry of wan10gSdhTable
INT wan10gSdhMappingMode	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.1	INTEGER	read-only	The mapping mode of client port packets into ODUk. default value :not-applicable
INT wan10gSdhAdminStatus	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT wan10gSdhOperStatus	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT wan10gSdhAvailStatus	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT wan10gSdhAliasName	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
COR wan10gSdhClientShutdown	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.6	CoriantTypesYesNo	read-only	The switching of client-shutdown. default value :no
U32 wan10gSdhClientShutdownHoldoffTimer	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.7	Unsigned32	read-only	The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
COR wan10gSdhHoldoffSignal	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.8	CoriantTypesYesNo	read-only	Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
COR wan10gSdhNearEndAls	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.9	CoriantTypesYesNo	read-only	The switching of near end ALS. default value :no
COR wan10gSdhAlsDegradeMode	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.10	CoriantTypesEnableSwitch	read-only	The switching of defect BERSD-ODU trig ALS default value :disabled
COR wan10gSdhLoopbackEnable	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.11	CoriantTypesEnableSwitch	read-only	The enable switching of loopback function. default value :disabled
INT wan10gSdhLoopbackType	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.12	INTEGER	read-only	The type mode of loopback function default value :none
COR wan10gSdhTestSignalType	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.13	CoriantTypesTestSignalType	read-only	The type mode of test signal. default value :NONE
COR wan10gSdhTestSignalEnable	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.14	CoriantTypesTestSignalConfig	read-only	The enable switching of test signal function default value :NONE
OCT wan10gSdhServiceLabel	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.15	OCTET STRING	read-only	Path/service name of cross-connection related facility.
OCT wan10gSdhExpTrc	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.16	OCTET STRING	read-only	The expected trc(trail trace identification)
OCT wan10gSdhTxTrc	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.17	OCTET STRING	read-only	The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
OCT wan10gSdhRxTrc	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.18	OCTET STRING	read-only	The received trc(trail trace identification)
COR wan10gSdhTimAct	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.19	CoriantTypesEnableSwitch	read-only	The enable switching of inserting AIS by tim function default value :disabled
COR wan10gSdhTimMonitor	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.20	CoriantTypesEnableSwitch	read-only	The enable switching of tim defect monitor mode default value :disabled
INT wan10gSdhAisType	1.3.6.1.4.1.42229.1.2.4.1.31.1.1.21	INTEGER	read-only	NULL default value :Generic-AIS
eth10gStatistics	1.3.6.1.4.1.42229.1.2.4.1.32
eth10gStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.32.1		not-accessible	NULL
eth10gStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.32.1.1		not-accessible	Entry of eth10gStatisticsTable
IET eth10gStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT eth10gStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT eth10gStatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT eth10gStatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
OCT eth10gStatisticsEntryInSymbolErrors	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.5	OCTET STRING	read-only	the statistics Times counting for input signal symbol errors UNITS:Events
OCT eth10gStatisticsEntryInDropEvents	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.6	OCTET STRING	read-only	the statistics counting for input signal drop events UNITS:events
OCT eth10gStatisticsEntryInOctets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.7	OCTET STRING	read-only	the statistics counting for input signal octets UNITS:octets
OCT eth10gStatisticsEntryInPackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.8	OCTET STRING	read-only	the statistics counting for input signal packets UNITS:packets
OCT eth10gStatisticsEntryInBroadcastPackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.9	OCTET STRING	read-only	the statistics counting for input broadcast packets UNITS:packets
OCT eth10gStatisticsEntryInMulticastPackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.10	OCTET STRING	read-only	the statistics counting for input multicast packets UNITS:packets
OCT eth10gStatisticsEntryInCrcAlignErrors	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.11	OCTET STRING	read-only	the statistics counting for input CRC error packets UNITS:packets
OCT eth10gStatisticsEntryInUndersizePackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.12	OCTET STRING	read-only	the statistics counting for input undersize packets UNITS:packets
OCT eth10gStatisticsEntryInOversizePackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.13	OCTET STRING	read-only	the statistics counting for input oversize packets UNITS:packets
OCT eth10gStatisticsEntryInFragments	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.14	OCTET STRING	read-only	the statistics counting for input fragment packets UNITS:packets
OCT eth10gStatisticsEntryInJabbers	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.15	OCTET STRING	read-only	the statistics counting for input jabber packets UNITS:packets
OCT eth10gStatisticsEntryInPackets64octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.16	OCTET STRING	read-only	the statistics counting for input 64 octets packets UNITS:packets
OCT eth10gStatisticsEntryInPackets65to127octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.17	OCTET STRING	read-only	the statistics counting for input 65 to 127 octets packets UNITS:packets
OCT eth10gStatisticsEntryInPackets128to255octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.18	OCTET STRING	read-only	the statistics counting for input 128 to 255 octets packets UNITS:packets
OCT eth10gStatisticsEntryInPackets256to511octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.19	OCTET STRING	read-only	the statistics counting for input 256 to 511 octets packets UNITS:packets
OCT eth10gStatisticsEntryInPackets512to1023octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.20	OCTET STRING	read-only	the statistics counting for input 512 to 1023 octets packets UNITS:packets
OCT eth10gStatisticsEntryInPackets1024to1518octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.21	OCTET STRING	read-only	the statistics counting for input 1024 to 1518 octets packets UNITS:packets
OCT eth10gStatisticsEntryOutSymbolErrors	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.22	OCTET STRING	read-only	the statistics Times counting for output signal symbol errors UNITS:Events
OCT eth10gStatisticsEntryOutDropEvents	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.23	OCTET STRING	read-only	the statistics counting for output signal drop events UNITS:events
OCT eth10gStatisticsEntryOutOctets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.24	OCTET STRING	read-only	the statistics counting for output signal octets UNITS:octets
OCT eth10gStatisticsEntryOutPackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.25	OCTET STRING	read-only	the statistics counting for output signal packets UNITS:packets
OCT eth10gStatisticsEntryOutBroadcastPackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.26	OCTET STRING	read-only	the statistics counting for output broadcast packets UNITS:packets
OCT eth10gStatisticsEntryOutMulticastPackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.27	OCTET STRING	read-only	the statistics counting for output multicast packets UNITS:packets
OCT eth10gStatisticsEntryOutCrcAlignErrors	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.28	OCTET STRING	read-only	the statistics counting for output CRC error packets UNITS:packets
OCT eth10gStatisticsEntryOutUndersizePackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.29	OCTET STRING	read-only	the statistics counting for output undersize packets UNITS:packets
OCT eth10gStatisticsEntryOutOversizePackets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.30	OCTET STRING	read-only	the statistics counting for output oversize packets UNITS:packets
OCT eth10gStatisticsEntryOutFragments	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.31	OCTET STRING	read-only	the statistics counting for output fragment packets UNITS:packets
OCT eth10gStatisticsEntryOutJabbers	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.32	OCTET STRING	read-only	the statistics counting for output jabber packets UNITS:packets
OCT eth10gStatisticsEntryOutPackets64octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.33	OCTET STRING	read-only	the statistics counting for output 64 octets packets UNITS:packets
OCT eth10gStatisticsEntryOutPackets65to127octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.34	OCTET STRING	read-only	the statistics counting for output 65 to 127 octets packets UNITS:packets
OCT eth10gStatisticsEntryOutPackets128to255octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.35	OCTET STRING	read-only	the statistics counting for output 128 to 255 octets packets UNITS:packets
OCT eth10gStatisticsEntryOutPackets256to511octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.36	OCTET STRING	read-only	the statistics counting for output 256 to 511 octets packets UNITS:packets
OCT eth10gStatisticsEntryOutPackets512to1023octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.37	OCTET STRING	read-only	the statistics counting for output 512 to 1023 octets packets UNITS:packets
OCT eth10gStatisticsEntryOutPackets1024to1518octets	1.3.6.1.4.1.42229.1.2.4.1.32.1.1.38	OCTET STRING	read-only	the statistics counting for output 1024 to 1518 octets packets UNITS:packets
oduStatistics	1.3.6.1.4.1.42229.1.2.4.1.33
oduStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.33.1		not-accessible	NULL
oduStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.33.1.1		not-accessible	Entry of oduStatisticsTable
IET oduStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.33.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT oduStatisticsEntryErroredBlocks	1.3.6.1.4.1.42229.1.2.4.1.33.1.1.2	OCTET STRING	read-only	the statistics counting for errored blocks UNITS:blocks
OCT oduStatisticsEntryErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.33.1.1.3	OCTET STRING	read-only	the statistics seconds counting for errored signal UNITS:seconds
OCT oduStatisticsEntrySeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.33.1.1.4	OCTET STRING	read-only	the statistics seconds counting for severely errored signal UNITS:seconds
OCT oduStatisticsEntryUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.33.1.1.5	OCTET STRING	read-only	the statistics seconds counting for unavailable signal UNITS:seconds
OCT oduStatisticsEntryEncryptionFailRx	1.3.6.1.4.1.42229.1.2.4.1.33.1.1.6	OCTET STRING	read-only	Failed Encryption Frames of Receive side UNITS:frames
eth40gStatistics	1.3.6.1.4.1.42229.1.2.4.1.34
eth40gStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.34.1		not-accessible	NULL
eth40gStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.34.1.1		not-accessible	Entry of eth40gStatisticsTable
IET eth40gStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT eth40gStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT eth40gStatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT eth40gStatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
OCT eth40gStatisticsEntryInSymbolErrors	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.5	OCTET STRING	read-only	the statistics Times counting for input signal symbol errors UNITS:Events
OCT eth40gStatisticsEntryInDropEvents	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.6	OCTET STRING	read-only	the statistics counting for input signal drop events UNITS:events
OCT eth40gStatisticsEntryInOctets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.7	OCTET STRING	read-only	the statistics counting for input signal octets UNITS:octets
OCT eth40gStatisticsEntryInPackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.8	OCTET STRING	read-only	the statistics counting for input signal packets UNITS:packets
OCT eth40gStatisticsEntryInBroadcastPackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.9	OCTET STRING	read-only	the statistics counting for input broadcast packets UNITS:packets
OCT eth40gStatisticsEntryInMulticastPackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.10	OCTET STRING	read-only	the statistics counting for input multicast packets UNITS:packets
OCT eth40gStatisticsEntryInCrcAlignErrors	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.11	OCTET STRING	read-only	the statistics counting for input CRC error packets UNITS:packets
OCT eth40gStatisticsEntryInUndersizePackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.12	OCTET STRING	read-only	the statistics counting for input undersize packets UNITS:packets
OCT eth40gStatisticsEntryInOversizePackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.13	OCTET STRING	read-only	the statistics counting for input oversize packets UNITS:packets
OCT eth40gStatisticsEntryInFragments	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.14	OCTET STRING	read-only	the statistics counting for input fragment packets UNITS:packets
OCT eth40gStatisticsEntryInJabbers	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.15	OCTET STRING	read-only	the statistics counting for input jabber packets UNITS:packets
OCT eth40gStatisticsEntryInPackets64octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.16	OCTET STRING	read-only	the statistics counting for input 64 octets packets UNITS:packets
OCT eth40gStatisticsEntryInPackets65to127octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.17	OCTET STRING	read-only	the statistics counting for input 65 to 127 octets packets UNITS:packets
OCT eth40gStatisticsEntryInPackets128to255octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.18	OCTET STRING	read-only	the statistics counting for input 128 to 255 octets packets UNITS:packets
OCT eth40gStatisticsEntryInPackets256to511octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.19	OCTET STRING	read-only	the statistics counting for input 256 to 511 octets packets UNITS:packets
OCT eth40gStatisticsEntryInPackets512to1023octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.20	OCTET STRING	read-only	the statistics counting for input 512 to 1023 octets packets UNITS:packets
OCT eth40gStatisticsEntryInPackets1024to1518octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.21	OCTET STRING	read-only	the statistics counting for input 1024 to 1518 octets packets UNITS:packets
OCT eth40gStatisticsEntryOutSymbolErrors	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.22	OCTET STRING	read-only	the statistics Times counting for output signal symbol errors UNITS:Events
OCT eth40gStatisticsEntryOutDropEvents	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.23	OCTET STRING	read-only	the statistics counting for output signal drop events UNITS:events
OCT eth40gStatisticsEntryOutOctets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.24	OCTET STRING	read-only	the statistics counting for output signal octets UNITS:octets
OCT eth40gStatisticsEntryOutPackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.25	OCTET STRING	read-only	the statistics counting for output signal packets UNITS:packets
OCT eth40gStatisticsEntryOutBroadcastPackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.26	OCTET STRING	read-only	the statistics counting for output broadcast packets UNITS:packets
OCT eth40gStatisticsEntryOutMulticastPackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.27	OCTET STRING	read-only	the statistics counting for output multicast packets UNITS:packets
OCT eth40gStatisticsEntryOutCrcAlignErrors	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.28	OCTET STRING	read-only	the statistics counting for output CRC error packets UNITS:packets
OCT eth40gStatisticsEntryOutUndersizePackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.29	OCTET STRING	read-only	the statistics counting for output undersize packets UNITS:packets
OCT eth40gStatisticsEntryOutOversizePackets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.30	OCTET STRING	read-only	the statistics counting for output oversize packets UNITS:packets
OCT eth40gStatisticsEntryOutFragments	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.31	OCTET STRING	read-only	the statistics counting for output fragment packets UNITS:packets
OCT eth40gStatisticsEntryOutJabbers	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.32	OCTET STRING	read-only	the statistics counting for output jabber packets UNITS:packets
OCT eth40gStatisticsEntryOutPackets64octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.33	OCTET STRING	read-only	the statistics counting for output 64 octets packets UNITS:packets
OCT eth40gStatisticsEntryOutPackets65to127octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.34	OCTET STRING	read-only	the statistics counting for output 65 to 127 octets packets UNITS:packets
OCT eth40gStatisticsEntryOutPackets128to255octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.35	OCTET STRING	read-only	the statistics counting for output 128 to 255 octets packets UNITS:packets
OCT eth40gStatisticsEntryOutPackets256to511octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.36	OCTET STRING	read-only	the statistics counting for output 256 to 511 octets packets UNITS:packets
OCT eth40gStatisticsEntryOutPackets512to1023octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.37	OCTET STRING	read-only	the statistics counting for output 512 to 1023 octets packets UNITS:packets
OCT eth40gStatisticsEntryOutPackets1024to1518octets	1.3.6.1.4.1.42229.1.2.4.1.34.1.1.38	OCTET STRING	read-only	the statistics counting for output 1024 to 1518 octets packets UNITS:packets
eth100gStatistics	1.3.6.1.4.1.42229.1.2.4.1.35
eth100gStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.35.1		not-accessible	NULL
eth100gStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.35.1.1		not-accessible	Entry of eth100gStatisticsTable
IET eth100gStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT eth100gStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT eth100gStatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT eth100gStatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
OCT eth100gStatisticsEntryInSymbolErrors	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.5	OCTET STRING	read-only	the statistics Times counting for input signal symbol errors UNITS:Events
OCT eth100gStatisticsEntryInDropEvents	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.6	OCTET STRING	read-only	the statistics counting for input signal drop events UNITS:events
OCT eth100gStatisticsEntryInOctets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.7	OCTET STRING	read-only	the statistics counting for input signal octets UNITS:octets
OCT eth100gStatisticsEntryInPackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.8	OCTET STRING	read-only	the statistics counting for input signal packets UNITS:packets
OCT eth100gStatisticsEntryInBroadcastPackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.9	OCTET STRING	read-only	the statistics counting for input broadcast packets UNITS:packets
OCT eth100gStatisticsEntryInMulticastPackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.10	OCTET STRING	read-only	the statistics counting for input multicast packets UNITS:packets
OCT eth100gStatisticsEntryInCrcAlignErrors	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.11	OCTET STRING	read-only	the statistics counting for input CRC error packets UNITS:packets
OCT eth100gStatisticsEntryInUndersizePackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.12	OCTET STRING	read-only	the statistics counting for input undersize packets UNITS:packets
OCT eth100gStatisticsEntryInOversizePackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.13	OCTET STRING	read-only	the statistics counting for input oversize packets UNITS:packets
OCT eth100gStatisticsEntryInFragments	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.14	OCTET STRING	read-only	the statistics counting for input fragment packets UNITS:packets
OCT eth100gStatisticsEntryInJabbers	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.15	OCTET STRING	read-only	the statistics counting for input jabber packets UNITS:packets
OCT eth100gStatisticsEntryInPackets64octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.16	OCTET STRING	read-only	the statistics counting for input 64 octets packets UNITS:packets
OCT eth100gStatisticsEntryInPackets65to127octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.17	OCTET STRING	read-only	the statistics counting for input 65 to 127 octets packets UNITS:packets
OCT eth100gStatisticsEntryInPackets128to255octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.18	OCTET STRING	read-only	the statistics counting for input 128 to 255 octets packets UNITS:packets
OCT eth100gStatisticsEntryInPackets256to511octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.19	OCTET STRING	read-only	the statistics counting for input 256 to 511 octets packets UNITS:packets
OCT eth100gStatisticsEntryInPackets512to1023octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.20	OCTET STRING	read-only	the statistics counting for input 512 to 1023 octets packets UNITS:packets
OCT eth100gStatisticsEntryInPackets1024to1518octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.21	OCTET STRING	read-only	the statistics counting for input 1024 to 1518 octets packets UNITS:packets
OCT eth100gStatisticsEntryOutSymbolErrors	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.22	OCTET STRING	read-only	the statistics Times counting for output signal symbol errors UNITS:Events
OCT eth100gStatisticsEntryOutDropEvents	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.23	OCTET STRING	read-only	the statistics counting for output signal drop events UNITS:events
OCT eth100gStatisticsEntryOutOctets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.24	OCTET STRING	read-only	the statistics counting for output signal octets UNITS:octets
OCT eth100gStatisticsEntryOutPackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.25	OCTET STRING	read-only	the statistics counting for output signal packets UNITS:packets
OCT eth100gStatisticsEntryOutBroadcastPackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.26	OCTET STRING	read-only	the statistics counting for output broadcast packets UNITS:packets
OCT eth100gStatisticsEntryOutMulticastPackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.27	OCTET STRING	read-only	the statistics counting for output multicast packets UNITS:packets
OCT eth100gStatisticsEntryOutCrcAlignErrors	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.28	OCTET STRING	read-only	the statistics counting for output CRC error packets UNITS:packets
OCT eth100gStatisticsEntryOutUndersizePackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.29	OCTET STRING	read-only	the statistics counting for output undersize packets UNITS:packets
OCT eth100gStatisticsEntryOutOversizePackets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.30	OCTET STRING	read-only	the statistics counting for output oversize packets UNITS:packets
OCT eth100gStatisticsEntryOutFragments	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.31	OCTET STRING	read-only	the statistics counting for output fragment packets UNITS:packets
OCT eth100gStatisticsEntryOutJabbers	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.32	OCTET STRING	read-only	the statistics counting for output jabber packets UNITS:packets
OCT eth100gStatisticsEntryOutPackets64octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.33	OCTET STRING	read-only	the statistics counting for output 64 octets packets UNITS:packets
OCT eth100gStatisticsEntryOutPackets65to127octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.34	OCTET STRING	read-only	the statistics counting for output 65 to 127 octets packets UNITS:packets
OCT eth100gStatisticsEntryOutPackets128to255octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.35	OCTET STRING	read-only	the statistics counting for output 128 to 255 octets packets UNITS:packets
OCT eth100gStatisticsEntryOutPackets256to511octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.36	OCTET STRING	read-only	the statistics counting for output 256 to 511 octets packets UNITS:packets
OCT eth100gStatisticsEntryOutPackets512to1023octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.37	OCTET STRING	read-only	the statistics counting for output 512 to 1023 octets packets UNITS:packets
OCT eth100gStatisticsEntryOutPackets1024to1518octets	1.3.6.1.4.1.42229.1.2.4.1.35.1.1.38	OCTET STRING	read-only	the statistics counting for output 1024 to 1518 octets packets UNITS:packets
otu4Statistics	1.3.6.1.4.1.42229.1.2.4.1.36
otu4StatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.36.1		not-accessible	NULL
otu4StatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.36.1.1		not-accessible	Entry of otu4StatisticsTable
IET otu4StatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.36.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT otu4StatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.36.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT otu4StatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.36.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT otu4StatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.36.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
OCT otu4StatisticsEntryErroredBlocks	1.3.6.1.4.1.42229.1.2.4.1.36.1.1.5	OCTET STRING	read-only	the statistics counting for errored blocks UNITS:blocks
OCT otu4StatisticsEntryErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.36.1.1.6	OCTET STRING	read-only	the statistics seconds counting for errored signal UNITS:seconds
OCT otu4StatisticsEntrySeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.36.1.1.7	OCTET STRING	read-only	the statistics seconds counting for severely errored signal UNITS:seconds
OCT otu4StatisticsEntryUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.36.1.1.8	OCTET STRING	read-only	the statistics seconds counting for unavailable signal UNITS:seconds
otu2Statistics	1.3.6.1.4.1.42229.1.2.4.1.37
otu2StatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.37.1		not-accessible	NULL
otu2StatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.37.1.1		not-accessible	Entry of otu2StatisticsTable
IET otu2StatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.37.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT otu2StatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.37.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT otu2StatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.37.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT otu2StatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.37.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
OCT otu2StatisticsEntryErroredBlocks	1.3.6.1.4.1.42229.1.2.4.1.37.1.1.5	OCTET STRING	read-only	the statistics counting for errored blocks UNITS:blocks
OCT otu2StatisticsEntryErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.37.1.1.6	OCTET STRING	read-only	the statistics seconds counting for errored signal UNITS:seconds
OCT otu2StatisticsEntrySeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.37.1.1.7	OCTET STRING	read-only	the statistics seconds counting for severely errored signal UNITS:seconds
OCT otu2StatisticsEntryUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.37.1.1.8	OCTET STRING	read-only	the statistics seconds counting for unavailable signal UNITS:seconds
otu2eStatistics	1.3.6.1.4.1.42229.1.2.4.1.38
otu2eStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.38.1		not-accessible	NULL
otu2eStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.38.1.1		not-accessible	Entry of otu2eStatisticsTable
IET otu2eStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.38.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT otu2eStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.38.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT otu2eStatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.38.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT otu2eStatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.38.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
OCT otu2eStatisticsEntryErroredBlocks	1.3.6.1.4.1.42229.1.2.4.1.38.1.1.5	OCTET STRING	read-only	the statistics counting for errored blocks UNITS:blocks
OCT otu2eStatisticsEntryErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.38.1.1.6	OCTET STRING	read-only	the statistics seconds counting for errored signal UNITS:seconds
OCT otu2eStatisticsEntrySeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.38.1.1.7	OCTET STRING	read-only	the statistics seconds counting for severely errored signal UNITS:seconds
OCT otu2eStatisticsEntryUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.38.1.1.8	OCTET STRING	read-only	the statistics seconds counting for unavailable signal UNITS:seconds
oc192Statistics	1.3.6.1.4.1.42229.1.2.4.1.39
oc192StatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.39.1		not-accessible	NULL
oc192StatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.39.1.1		not-accessible	Entry of oc192StatisticsTable
IET oc192StatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.39.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT oc192StatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.39.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT oc192StatisticsEntryInCodingViolation	1.3.6.1.4.1.42229.1.2.4.1.39.1.1.3	OCTET STRING	read-only	the statistics bits counting for ingress coding violation UNITS:bits
OCT oc192StatisticsEntryInErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.39.1.1.4	OCTET STRING	read-only	the statistics seconds counting for RX errored signal UNITS:seconds
OCT oc192StatisticsEntryInSeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.39.1.1.5	OCTET STRING	read-only	the statistics seconds counting for RX severely errored signal UNITS:seconds
OCT oc192StatisticsEntryInUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.39.1.1.6	OCTET STRING	read-only	the statistics seconds counting for RX unavailable signal UNITS:seconds
OCT oc192StatisticsEntryInSeverelyErroredFrameSecond	1.3.6.1.4.1.42229.1.2.4.1.39.1.1.7	OCTET STRING	read-only	the statistics seconds counting for ingress signal frame severely errored UNITS:seconds
stm64Statistics	1.3.6.1.4.1.42229.1.2.4.1.40
stm64StatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.40.1		not-accessible	NULL
stm64StatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.40.1.1		not-accessible	Entry of stm64StatisticsTable
IET stm64StatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.40.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT stm64StatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.40.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT stm64StatisticsEntryInBackgroundBlockError	1.3.6.1.4.1.42229.1.2.4.1.40.1.1.3	OCTET STRING	read-only	the statistics counting for ingress errored blocks UNITS:blocks
OCT stm64StatisticsEntryInErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.40.1.1.4	OCTET STRING	read-only	the statistics seconds counting for RX errored signal UNITS:seconds
OCT stm64StatisticsEntryInSeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.40.1.1.5	OCTET STRING	read-only	the statistics seconds counting for RX severely errored signal UNITS:seconds
OCT stm64StatisticsEntryInUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.40.1.1.6	OCTET STRING	read-only	the statistics seconds counting for RX unavailable signal UNITS:seconds
OCT stm64StatisticsEntryInOutOfFrameSeconds	1.3.6.1.4.1.42229.1.2.4.1.40.1.1.7	OCTET STRING	read-only	the statistics seconds counting for ingress signal lose of frame UNITS:seconds
wan10gSonetStatistics	1.3.6.1.4.1.42229.1.2.4.1.41
wan10gSonetStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.41.1		not-accessible	NULL
wan10gSonetStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.41.1.1		not-accessible	Entry of wan10gSonetStatisticsTable
IET wan10gSonetStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.41.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT wan10gSonetStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.41.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT wan10gSonetStatisticsEntryInCodingViolation	1.3.6.1.4.1.42229.1.2.4.1.41.1.1.3	OCTET STRING	read-only	the statistics bits counting for ingress coding violation UNITS:bits
OCT wan10gSonetStatisticsEntryInErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.41.1.1.4	OCTET STRING	read-only	the statistics seconds counting for RX errored signal UNITS:seconds
OCT wan10gSonetStatisticsEntryInSeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.41.1.1.5	OCTET STRING	read-only	the statistics seconds counting for RX severely errored signal UNITS:seconds
OCT wan10gSonetStatisticsEntryInUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.41.1.1.6	OCTET STRING	read-only	the statistics seconds counting for RX unavailable signal UNITS:seconds
OCT wan10gSonetStatisticsEntryInSeverelyErroredFrameSecond	1.3.6.1.4.1.42229.1.2.4.1.41.1.1.7	OCTET STRING	read-only	the statistics seconds counting for ingress signal frame severely errored UNITS:seconds
wan10gSdhStatistics	1.3.6.1.4.1.42229.1.2.4.1.42
wan10gSdhStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.42.1		not-accessible	NULL
wan10gSdhStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.42.1.1		not-accessible	Entry of wan10gSdhStatisticsTable
IET wan10gSdhStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.42.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT wan10gSdhStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.42.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT wan10gSdhStatisticsEntryInBackgroundBlockError	1.3.6.1.4.1.42229.1.2.4.1.42.1.1.3	OCTET STRING	read-only	the statistics counting for ingress errored blocks UNITS:blocks
OCT wan10gSdhStatisticsEntryInErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.42.1.1.4	OCTET STRING	read-only	the statistics seconds counting for RX errored signal UNITS:seconds
OCT wan10gSdhStatisticsEntryInSeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.42.1.1.5	OCTET STRING	read-only	the statistics seconds counting for RX severely errored signal UNITS:seconds
OCT wan10gSdhStatisticsEntryInUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.42.1.1.6	OCTET STRING	read-only	the statistics seconds counting for RX unavailable signal UNITS:seconds
OCT wan10gSdhStatisticsEntryInOutOfFrameSeconds	1.3.6.1.4.1.42229.1.2.4.1.42.1.1.7	OCTET STRING	read-only	the statistics seconds counting for ingress signal lose of frame UNITS:seconds
fc8gStatistics	1.3.6.1.4.1.42229.1.2.4.1.43
fc8gStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.43.1		not-accessible	NULL
fc8gStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.43.1.1		not-accessible	Entry of fc8gStatisticsTable
IET fc8gStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.43.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT fc8gStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.43.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT fc8gStatisticsEntryInSymbolErrors	1.3.6.1.4.1.42229.1.2.4.1.43.1.1.3	OCTET STRING	read-only	the statistics Times counting for signal symbol errors UNITS:Events
fc16gStatistics	1.3.6.1.4.1.42229.1.2.4.1.44
fc16gStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.44.1		not-accessible	NULL
fc16gStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.44.1.1		not-accessible	Entry of fc16gStatisticsTable
IET fc16gStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.44.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT fc16gStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.44.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT fc16gStatisticsEntryInSymbolErrors	1.3.6.1.4.1.42229.1.2.4.1.44.1.1.3	OCTET STRING	read-only	the statistics Times counting for signal symbol errors UNITS:Events
otuc2Statistics	1.3.6.1.4.1.42229.1.2.4.1.45
otuc2StatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.45.1		not-accessible	NULL
otuc2StatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.45.1.1		not-accessible	Entry of otuc2StatisticsTable
IET otuc2StatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.45.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT otuc2StatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.45.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT otuc2StatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.45.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT otuc2StatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.45.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
OCT otuc2StatisticsEntryErroredBlocks	1.3.6.1.4.1.42229.1.2.4.1.45.1.1.5	OCTET STRING	read-only	the statistics counting for errored blocks UNITS:blocks
OCT otuc2StatisticsEntryErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.45.1.1.6	OCTET STRING	read-only	the statistics seconds counting for errored signal UNITS:seconds
OCT otuc2StatisticsEntrySeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.45.1.1.7	OCTET STRING	read-only	the statistics seconds counting for severely errored signal UNITS:seconds
OCT otuc2StatisticsEntryUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.45.1.1.8	OCTET STRING	read-only	the statistics seconds counting for unavailable signal UNITS:seconds
otuc3Statistics	1.3.6.1.4.1.42229.1.2.4.1.46
otuc3StatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.46.1		not-accessible	NULL
otuc3StatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.46.1.1		not-accessible	Entry of otuc3StatisticsTable
IET otuc3StatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.46.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT otuc3StatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.46.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT otuc3StatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.46.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT otuc3StatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.46.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
OCT otuc3StatisticsEntryErroredBlocks	1.3.6.1.4.1.42229.1.2.4.1.46.1.1.5	OCTET STRING	read-only	the statistics counting for errored blocks UNITS:blocks
OCT otuc3StatisticsEntryErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.46.1.1.6	OCTET STRING	read-only	the statistics seconds counting for errored signal UNITS:seconds
OCT otuc3StatisticsEntrySeverelyErroredSeconds	1.3.6.1.4.1.42229.1.2.4.1.46.1.1.7	OCTET STRING	read-only	the statistics seconds counting for severely errored signal UNITS:seconds
OCT otuc3StatisticsEntryUnavailableSeconds	1.3.6.1.4.1.42229.1.2.4.1.46.1.1.8	OCTET STRING	read-only	the statistics seconds counting for unavailable signal UNITS:seconds
ochOsStatistics	1.3.6.1.4.1.42229.1.2.4.1.47
ochOsStatisticsTable	1.3.6.1.4.1.42229.1.2.4.1.47.1		not-accessible	NULL
ochOsStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.1.47.1.1		not-accessible	Entry of ochOsStatisticsTable
IET ochOsStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.1.47.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
OCT ochOsStatisticsEntryLossOfSignalSeconds	1.3.6.1.4.1.42229.1.2.4.1.47.1.1.2	OCTET STRING	read-only	the statistics seconds counting for signal loss UNITS:seconds
OCT ochOsStatisticsEntryBitErrorFec	1.3.6.1.4.1.42229.1.2.4.1.47.1.1.3	OCTET STRING	read-only	the statistics bits counting for error bit forward error correction UNITS:bits
OCT ochOsStatisticsEntryUncorrectedBlockErrorFec	1.3.6.1.4.1.42229.1.2.4.1.47.1.1.4	OCTET STRING	read-only	the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
cRS	1.3.6.1.4.1.42229.1.2.4.3
cRSTable	1.3.6.1.4.1.42229.1.2.4.3.1		not-accessible	Cross connection table.
cRSEntry	1.3.6.1.4.1.42229.1.2.4.3.1.1		not-accessible	Entry of cRSTable
NUM cRSSrcTp	1.3.6.1.4.1.42229.1.2.4.3.1.1.1	RowPointer	read-only	Source tp of cross connection.
NUM cRSDstTp	1.3.6.1.4.1.42229.1.2.4.3.1.1.2	RowPointer	read-only	Destination tp of cross connection.
OCT cRSServiceLabel	1.3.6.1.4.1.42229.1.2.4.3.1.1.3	OCTET STRING	read-only	Path/service name of cross-connection.
INT cRSManagedBy	1.3.6.1.4.1.42229.1.2.4.3.1.1.4	INTEGER	read-only	Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user
OCT cRSAliasName	1.3.6.1.4.1.42229.1.2.4.3.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
fiberConnection	1.3.6.1.4.1.42229.1.2.4.4
fiberConnectionTable	1.3.6.1.4.1.42229.1.2.4.4.1		not-accessible	Fiber connection table which will be user managed and be explicitly provisioned by user. Fiber Connection indicates the physical fiber connection between physical ports or subports.
fiberConnectionEntry	1.3.6.1.4.1.42229.1.2.4.4.1.1		not-accessible	Entry of fiberConnectionTable
NUM fiberConnectionSrcPort	1.3.6.1.4.1.42229.1.2.4.4.1.1.1	RowPointer	read-only	Source port of fiber connection.
NUM fiberConnectionDstPort	1.3.6.1.4.1.42229.1.2.4.4.1.1.2	RowPointer	read-only	Destination port of fiber connection.
INT fiberConnectionType	1.3.6.1.4.1.42229.1.2.4.4.1.1.3	INTEGER	read-only	Indicates fiber connection type. default value :two-way
OCT fiberConnectionFiberLabel	1.3.6.1.4.1.42229.1.2.4.4.1.1.4	OCTET STRING	read-only	Label of fiber connection.
OCT fiberConnectionAliasName	1.3.6.1.4.1.42229.1.2.4.4.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
optical	1.3.6.1.4.1.42229.1.2.4.5
ots	1.3.6.1.4.1.42229.1.2.4.5.2
otsTable	1.3.6.1.4.1.42229.1.2.4.5.2.1		not-accessible	Represents the Optical Transmission Section (OTS) interface entity
otsEntry	1.3.6.1.4.1.42229.1.2.4.5.2.1.1		not-accessible	Entry of otsTable
OID otsName	1.3.6.1.4.1.42229.1.2.4.5.2.1.1.1	CoriantTypesNameIdentifier	read-only	The name is defined to uniquely identify the ots optical interface.
INT otsAdminStatus	1.3.6.1.4.1.42229.1.2.4.5.2.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT otsOperStatus	1.3.6.1.4.1.42229.1.2.4.5.2.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT otsAvailStatus	1.3.6.1.4.1.42229.1.2.4.5.2.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT otsAliasName	1.3.6.1.4.1.42229.1.2.4.5.2.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OPT otsSupportingRxPort	1.3.6.1.4.1.42229.1.2.4.5.2.1.1.6	OpticalCommonSupportingPort	read-only	Supporting Rx port for the optical interface.
OPT otsSupportingTxPort	1.3.6.1.4.1.42229.1.2.4.5.2.1.1.7	OpticalCommonSupportingPort	read-only	Supporting Tx port for the optical interface.
COR otsMeasuredSpanLoss	1.3.6.1.4.1.42229.1.2.4.5.2.1.1.8	CoriantTypesOpticalDB	read-only	The measured span loss excluding offset.
oms	1.3.6.1.4.1.42229.1.2.4.5.3
omsTable	1.3.6.1.4.1.42229.1.2.4.5.3.1		not-accessible	Represents the optical multiplex section (OMS) interface MO
omsEntry	1.3.6.1.4.1.42229.1.2.4.5.3.1.1		not-accessible	Entry of omsTable
OID omsName	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.1	CoriantTypesNameIdentifier	read-only	The name is defined to uniquely identify the oms optical interface.
INT omsAdminStatus	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT omsOperStatus	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT omsAvailStatus	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT omsAliasName	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OPT omsSupportingRxPort	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.6	OpticalCommonSupportingPort	read-only	Supporting Rx port for the optical interface.
OPT omsSupportingTxPort	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.7	OpticalCommonSupportingPort	read-only	Supporting Tx port for the optical interface.
NUM omsParentOtsInterface	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.8	RowPointer	read-only	Supporting OTS interface.
COR omsRxOpticalPower	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.9	CoriantTypesOpticalPower	read-only	Received optical power
COR omsTxOpticalPower	1.3.6.1.4.1.42229.1.2.4.5.3.1.1.10	CoriantTypesOpticalPower	read-only	Transmitted optical power
osc	1.3.6.1.4.1.42229.1.2.4.5.4
oscTable	1.3.6.1.4.1.42229.1.2.4.5.4.1		not-accessible	Represents the Optical Supervision Channel (OSC) MO
oscEntry	1.3.6.1.4.1.42229.1.2.4.5.4.1.1		not-accessible	Entry of oscTable
OID oscName	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.1	CoriantTypesNameIdentifier	read-only	The name is defined to uniquely identify the osc optical interface.
INT oscAdminStatus	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT oscOperStatus	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT oscAvailStatus	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT oscAliasName	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OPT oscSupportingRxPort	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.6	OpticalCommonSupportingPort	read-only	Supporting Rx port for the optical interface.
OPT oscSupportingTxPort	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.7	OpticalCommonSupportingPort	read-only	Supporting Tx port for the optical interface.
NUM oscParentOtsInterface	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.8	RowPointer	read-only	Supporting OTS insterface.
INT oscMode	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.9	INTEGER	read-only	Indicating the current OSC mode. default value :155M52
OCT oscWavelength	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.10	OCTET STRING	read-only	Indicates the wavelength band of the OSC channel. UNITS:nm default value :1510
COR oscDataCommunication	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.11	CoriantTypesEnableSwitch	read-only	Configuration for enable or disable data communication network support of the OSC. default value :enabled
COR oscRxOpticalPower	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.12	CoriantTypesOpticalPower	read-only	Received optical power
COR oscTxOpticalPower	1.3.6.1.4.1.42229.1.2.4.5.4.1.1.13	CoriantTypesOpticalPower	read-only	Transmitted optical power
gopt	1.3.6.1.4.1.42229.1.2.4.5.5
goptTable	1.3.6.1.4.1.42229.1.2.4.5.5.1		not-accessible	Represents the Generic Optical Section Interface (GOPT) MO
goptEntry	1.3.6.1.4.1.42229.1.2.4.5.5.1.1		not-accessible	Entry of goptTable
OID goptName	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.1	CoriantTypesNameIdentifier	read-only	The name is defined to uniquely identify the gopt optical interface.
INT goptAdminStatus	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT goptOperStatus	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT goptAvailStatus	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.4	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT goptAliasName	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.5	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
OPT goptSupportingRxPort	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.6	OpticalCommonSupportingPort	read-only	Supporting Rx port for the optical interface.
OPT goptSupportingTxPort	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.7	OpticalCommonSupportingPort	read-only	Supporting Tx port for the optical interface.
COR goptRxOpticalPower	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.8	CoriantTypesOpticalPower	read-only	Received optical power
COR goptTxOpticalPower	1.3.6.1.4.1.42229.1.2.4.5.5.1.1.9	CoriantTypesOpticalPower	read-only	Transmitted optical power
omsStatistics	1.3.6.1.4.1.42229.1.2.4.5.9
omsStatisticsTable	1.3.6.1.4.1.42229.1.2.4.5.9.1		not-accessible	NULL
omsStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.5.9.1.1		not-accessible	Entry of omsStatisticsTable
IET omsStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.5.9.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
oscStatistics	1.3.6.1.4.1.42229.1.2.4.5.10
oscStatisticsTable	1.3.6.1.4.1.42229.1.2.4.5.10.1		not-accessible	NULL
oscStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.5.10.1.1		not-accessible	Entry of oscStatisticsTable
IET oscStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.5.10.1.1.1	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
goptStatistics	1.3.6.1.4.1.42229.1.2.4.5.11
goptStatisticsTable	1.3.6.1.4.1.42229.1.2.4.5.11.1		not-accessible	NULL
goptStatisticsEntry	1.3.6.1.4.1.42229.1.2.4.5.11.1.1		not-accessible	Entry of goptStatisticsTable
OCT goptStatisticsEntryProtectionSwitchDuration	1.3.6.1.4.1.42229.1.2.4.5.11.1.1.1	OCTET STRING	read-only	Protection Switch Duration UNITS:seconds
OCT goptStatisticsEntryProtectionSwitchCount	1.3.6.1.4.1.42229.1.2.4.5.11.1.1.2	OCTET STRING	read-only	Protection Switch Count UNITS:times
OCT goptStatisticsEntryLossTx	1.3.6.1.4.1.42229.1.2.4.5.11.1.1.3	OCTET STRING	read-only	Loss of Signal Seconds of Transmit side UNITS:seconds
OCT goptStatisticsEntryLossRx	1.3.6.1.4.1.42229.1.2.4.5.11.1.1.4	OCTET STRING	read-only	Loss of Signal Seconds of Receive side UNITS:seconds
IET goptStatisticsEntryLastClear	1.3.6.1.4.1.42229.1.2.4.5.11.1.1.5	IetfYangTypesDateAndTime	read-only	The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
lldp	1.3.6.1.4.1.42229.1.2.4.6
COR lldpStatusNe	1.3.6.1.4.1.42229.1.2.4.6.1	CoriantTypesEnableSwitch	read-only	Global lldp control on NE level. Value of 'enabled', then the LLDP agent will receive, but it will not transmit LLDP frames on all ports with port level lldp not disabled of the NE. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on all ports of the NE. If there is remote systems information which is received on ports supporting LLDP and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. default value :disabled
performance	1.3.6.1.4.1.42229.1.2.5
performanceInfo	1.3.6.1.4.1.42229.1.2.5.1
U32 performancePmdaystart	1.3.6.1.4.1.42229.1.2.5.1.1	Unsigned32	read-only	Specifies the hour of starting collecting 1-DAY monitoring parameters. To reset the NE clock to the default value of 00:00 hours, the parameter should contain the value 0. UNITS:hour default value :0
COR performanceStatisticsEnable	1.3.6.1.4.1.42229.1.2.5.1.2	CoriantTypesEnableSwitch	read-only	The global switch for all system statistics data collection. default value :enabled
pmPoint	1.3.6.1.4.1.42229.1.2.5.2
pmPointTable	1.3.6.1.4.1.42229.1.2.5.2.1		not-accessible	The list of performance monitoring points associated with the monitored management object.
pmPointEntry	1.3.6.1.4.1.42229.1.2.5.2.1.1		not-accessible	Entry of pmPointTable
NUM pmPointPmEntity	1.3.6.1.4.1.42229.1.2.5.2.1.1.1	RowPointer	read-only	Specifies the management object instance the performance monitoring data are collected for.
COR pmPointPmpType	1.3.6.1.4.1.42229.1.2.5.2.1.1.2	CoriantPmtypesPmpType	read-only	Specifies the type of performance monitoring point.
COR pmPointPmTimePeriod	1.3.6.1.4.1.42229.1.2.5.2.1.1.3	CoriantTypesManagementTimePeriod	read-only	Specifies the time-period increments during which PM data are collected.
COR pmPointSupervisionSwitch	1.3.6.1.4.1.42229.1.2.5.2.1.1.4	CoriantTypesEnableSwitch	read-only	Enable/disable counting for all performance monitoring parameters of the given PMP. default value :disabled
COR pmPointThresholdingSwitch	1.3.6.1.4.1.42229.1.2.5.2.1.1.5	CoriantTypesEnableSwitch	read-only	Enable/disable the TCA processing and reporting for all performance monitoring parameters of the given PM point. default value :enabled
COR pmPointHistoryRecording	1.3.6.1.4.1.42229.1.2.5.2.1.1.6	CoriantTypesEnableSwitch	read-only	Enable/disable the history data storage for all performance monitoring parameters of the given PM point. default value :enabled
pmData	1.3.6.1.4.1.42229.1.2.5.3
pmDataCurrentTable	1.3.6.1.4.1.42229.1.2.5.3.2		not-accessible	Defines the get-pm output of record performance data for current time
pmDataCurrentEntry	1.3.6.1.4.1.42229.1.2.5.3.2.1		not-accessible	Entry of pmDataCurrentTable
OCT pmDataCurrentMonitoringDateTime	1.3.6.1.4.1.42229.1.2.5.3.2.1.1	OCTET STRING	read-only	Monitoring data and time'
COR pmDataCurrentPmParameter	1.3.6.1.4.1.42229.1.2.5.3.2.1.2	CoriantPmtypesPmParameter	not-accessible	Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
OCT pmDataCurrentPmValue	1.3.6.1.4.1.42229.1.2.5.3.2.1.3	OCTET STRING	read-only	PM counter or gauge value of the PM parameter.
COR pmDataCurrentPmUnit	1.3.6.1.4.1.42229.1.2.5.3.2.1.4	CoriantCommonpmUnitOfValue	read-only	Unit of PM value.
COR pmDataCurrentValidity	1.3.6.1.4.1.42229.1.2.5.3.2.1.5	CoriantPmtypesValidityType	read-only	Indicates whether or not a performance monitoring value is valid.
pmDataLatestHistoryTable	1.3.6.1.4.1.42229.1.2.5.3.3		not-accessible	Defines the get-pm output of record performance data for latest history time
pmDataLatestHistoryEntry	1.3.6.1.4.1.42229.1.2.5.3.3.1		not-accessible	Entry of pmDataLatestHistoryTable
OCT pmDataLatestHistoryMonitoringDateTime	1.3.6.1.4.1.42229.1.2.5.3.3.1.1	OCTET STRING	read-only	Monitoring data and time'
COR pmDataLatestHistoryPmParameter	1.3.6.1.4.1.42229.1.2.5.3.3.1.2	CoriantPmtypesPmParameter	not-accessible	Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
OCT pmDataLatestHistoryPmValue	1.3.6.1.4.1.42229.1.2.5.3.3.1.3	OCTET STRING	read-only	PM counter or gauge value of the PM parameter.
COR pmDataLatestHistoryPmUnit	1.3.6.1.4.1.42229.1.2.5.3.3.1.4	CoriantCommonpmUnitOfValue	read-only	Unit of PM value.
COR pmDataLatestHistoryValidity	1.3.6.1.4.1.42229.1.2.5.3.3.1.5	CoriantPmtypesValidityType	read-only	Indicates whether or not a performance monitoring value is valid.
pmDataHistoryTable	1.3.6.1.4.1.42229.1.2.5.3.4		not-accessible	Defines the get-pm output of record performance data for history
pmDataHistoryEntry	1.3.6.1.4.1.42229.1.2.5.3.4.1		not-accessible	Entry of pmDataHistoryTable
U32 pmDataHistoryRecordIndex	1.3.6.1.4.1.42229.1.2.5.3.4.1.1	Unsigned32	not-accessible	Index of PM data records.
OCT pmDataHistoryMonitoringDateTime	1.3.6.1.4.1.42229.1.2.5.3.4.1.2	OCTET STRING	read-only	Monitoring data and time'
COR pmDataHistoryPmParameter	1.3.6.1.4.1.42229.1.2.5.3.4.1.3	CoriantPmtypesPmParameter	not-accessible	Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
OCT pmDataHistoryPmValue	1.3.6.1.4.1.42229.1.2.5.3.4.1.4	OCTET STRING	read-only	PM counter or gauge value of the PM parameter.
COR pmDataHistoryPmUnit	1.3.6.1.4.1.42229.1.2.5.3.4.1.5	CoriantCommonpmUnitOfValue	read-only	Unit of PM value.
COR pmDataHistoryValidity	1.3.6.1.4.1.42229.1.2.5.3.4.1.6	CoriantPmtypesValidityType	read-only	Indicates whether or not a performance monitoring value is valid.
pmThresholdsValue	1.3.6.1.4.1.42229.1.2.5.4
pmThresholdsValueTable	1.3.6.1.4.1.42229.1.2.5.4.1		not-accessible	The list of entries of performance monitoring threshold value.
pmThresholdsValueEntry	1.3.6.1.4.1.42229.1.2.5.4.1.1		not-accessible	Entry of pmThresholdsValueTable
COR pmThresholdsValuePmParameter	1.3.6.1.4.1.42229.1.2.5.4.1.1.1	CoriantPmtypesPmParameter	read-only	Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
COR pmThresholdsValuePmHighThreshold	1.3.6.1.4.1.42229.1.2.5.4.1.1.2	CoriantCommonpmThresholdValue	read-only	Specifies the desired high threshold value of the selected performance monitoring parameter.
COR pmThresholdsValuePmLowThreshold	1.3.6.1.4.1.42229.1.2.5.4.1.1.3	CoriantCommonpmThresholdValue	read-only	Specifies the desired low threshold value of the selected performance monitoring parameter.
COR pmThresholdsValuePmUnit	1.3.6.1.4.1.42229.1.2.5.4.1.1.4	CoriantCommonpmUnitOfValue	read-only	The unit of the performance monitoring value.
networking	1.3.6.1.4.1.42229.1.2.6
networkingInfo	1.3.6.1.4.1.42229.1.2.6.1
INT networkingSourceAddressSelectMode	1.3.6.1.4.1.42229.1.2.6.1.1	INTEGER	read-only	Select the source address for route next-hop entry. loopback-prefer mode select the numerically lowest address configured on loopback interfaces if exist, link-prefer mode select the address configured on the outgoing interface default value :link-prefer
interface	1.3.6.1.4.1.42229.1.2.6.2
interfaceTable	1.3.6.1.4.1.42229.1.2.6.2.1		not-accessible	The list of configured interfaces on the device.
interfaceEntry	1.3.6.1.4.1.42229.1.2.6.2.1.1		not-accessible	Entry of interfaceTable
OCT interfaceIfName	1.3.6.1.4.1.42229.1.2.6.2.1.1.1	OCTET STRING	read-only	The name of the interface.
OCT interfaceIfDescription	1.3.6.1.4.1.42229.1.2.6.2.1.1.2	OCTET STRING	read-only	A textual description of the interface.
INT interfaceIfType	1.3.6.1.4.1.42229.1.2.6.2.1.1.3	INTEGER	read-only	The type of the interface. Refer to http://www.iana.org/assignments/smi-numbers
INT interfaceAdminStatus	1.3.6.1.4.1.42229.1.2.6.2.1.1.4	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT interfaceOperStatus	1.3.6.1.4.1.42229.1.2.6.2.1.1.5	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
BIT interfaceAvailStatus	1.3.6.1.4.1.42229.1.2.6.2.1.1.6	Bits	read-only	Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
OCT interfaceAliasName	1.3.6.1.4.1.42229.1.2.6.2.1.1.7	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
ethernet	1.3.6.1.4.1.42229.1.2.6.3
ethernetTable	1.3.6.1.4.1.42229.1.2.6.3.1		not-accessible	The Ethernet attributes of an Ethernet interface.
ethernetEntry	1.3.6.1.4.1.42229.1.2.6.3.1.1		not-accessible	Entry of ethernetTable
COR ethernetAutoNegotiation	1.3.6.1.4.1.42229.1.2.6.3.1.1.1	CoriantTypesEnableSwitch	read-only	Auto negotiation mode. default value :disabled
COR ethernetDuplexMode	1.3.6.1.4.1.42229.1.2.6.3.1.1.2	CoriantTypesDuplexMode	read-only	Duplex Mode; only valid if auto negotiation is disabled. default value :full
COR ethernetOperationalDuplexMode	1.3.6.1.4.1.42229.1.2.6.3.1.1.3	CoriantTypesDuplexMode	read-only	Operational duplex mode. default value :NA
COR ethernetRate	1.3.6.1.4.1.42229.1.2.6.3.1.1.4	CoriantTypesEthernetRate	read-only	Required Ethernet Rate; only valid if auto negotiation is disabled. default value :max-rate
COR ethernetOperationalEthernetRate	1.3.6.1.4.1.42229.1.2.6.3.1.1.5	CoriantTypesEthernetRate	read-only	Operation ethernet rate. default value :NA
COR ethernetFlowControl	1.3.6.1.4.1.42229.1.2.6.3.1.1.6	CoriantTypesFlowControl	read-only	Specifies the type of flow control to be supported. default value :tx-rx
COR ethernetOperationalFlowControl	1.3.6.1.4.1.42229.1.2.6.3.1.1.7	CoriantTypesFlowControl	read-only	Operational flow control. default value :NA
ADR ethernetMacAddress	1.3.6.1.4.1.42229.1.2.6.3.1.1.8	IetfYangTypesMacAddress	read-only	MAC Address of the port. default value :00:00:00:00:00:00
OCT ethernetAliasName	1.3.6.1.4.1.42229.1.2.6.3.1.1.9	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
ppp	1.3.6.1.4.1.42229.1.2.6.4
pppTable	1.3.6.1.4.1.42229.1.2.6.4.1		not-accessible	NULL
pppEntry	1.3.6.1.4.1.42229.1.2.6.4.1.1		not-accessible	Entry of pppTable
INT pppType	1.3.6.1.4.1.42229.1.2.6.4.1.1.1	INTEGER	read-only	Specifies the link type associated with the ppp.
NUM pppPfRef	1.3.6.1.4.1.42229.1.2.6.4.1.1.2	RowPointer	read-only	Reference of the ppp profile.
NUM pppResourceRef	1.3.6.1.4.1.42229.1.2.6.4.1.1.3	RowPointer	read-only	Reference of the lower layer resource associated with this interface.
OCT pppAliasName	1.3.6.1.4.1.42229.1.2.6.4.1.1.4	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
ipv4	1.3.6.1.4.1.42229.1.2.6.5
ipv4Table	1.3.6.1.4.1.42229.1.2.6.5.1		not-accessible	Parameters for the IPv4 address family.
ipv4Entry	1.3.6.1.4.1.42229.1.2.6.5.1.1		not-accessible	Entry of ipv4Table
T/F ipv4Forwarding	1.3.6.1.4.1.42229.1.2.6.5.1.1.1	TruthValue	read-only	Controls IPv4 packet forwarding of datagrams received by, but not addressed to, this interface. IPv4 routers forward datagrams. IPv4 hosts do not (except those source-routed via the host). default value :true
U32 ipv4Mtu	1.3.6.1.4.1.42229.1.2.6.5.1.1.2	Unsigned32	read-only	The size, in octets, of the largest IPv4 packet that the interface will send and receive. The server may restrict the allowed values for this leaf, depending on the interface's type. If this leaf is not configured, the operationally used MTU depends on the interface's type. UNITS:octets
INT ipv4AddressAssignmentMethod	1.3.6.1.4.1.42229.1.2.6.5.1.1.3	INTEGER	read-only	IPv4 address assignment method. default value :static
ipAddress	1.3.6.1.4.1.42229.1.2.6.6
ipAddressTable	1.3.6.1.4.1.42229.1.2.6.6.1		not-accessible	The IPv4 address on the interface.
ipAddressEntry	1.3.6.1.4.1.42229.1.2.6.6.1.1		not-accessible	Entry of ipAddressTable
ADR ipAddressIp	1.3.6.1.4.1.42229.1.2.6.6.1.1.1	IetfInetTypesIpv4Address	read-only	The IPv4 address on the interface.
INT ipAddressOrigin	1.3.6.1.4.1.42229.1.2.6.6.1.1.2	INTEGER	read-only	The origin of this address. default value :static
U32 ipAddressPrefixLength	1.3.6.1.4.1.42229.1.2.6.6.1.1.3	Unsigned32	read-only	The length of the subnet prefix.
ipUnnumbered	1.3.6.1.4.1.42229.1.2.6.7
ipUnnumberedTable	1.3.6.1.4.1.42229.1.2.6.7.1		not-accessible	The IP unnumbered configurations.
ipUnnumberedEntry	1.3.6.1.4.1.42229.1.2.6.7.1.1		not-accessible	Entry of ipUnnumberedTable
T/F ipUnnumberedUnnumEnabled	1.3.6.1.4.1.42229.1.2.6.7.1.1.1	TruthValue	read-only	Indicates that the interface is unnumbered. By default the interface is numbered, i.e., expected to have an IP address configuration. default value :false
NUM ipUnnumberedParentInterface	1.3.6.1.4.1.42229.1.2.6.7.1.1.2	RowPointer	read-only	Reference of the parent interface of the unnumbered interface.
routingProtocol	1.3.6.1.4.1.42229.1.2.6.9
routingProtocolTable	1.3.6.1.4.1.42229.1.2.6.9.1		not-accessible	Routing protocol instance.
routingProtocolEntry	1.3.6.1.4.1.42229.1.2.6.9.1.1		not-accessible	Entry of routingProtocolTable
COR routingProtocolRtpType	1.3.6.1.4.1.42229.1.2.6.9.1.1.1	CoriantTypesRtpType	read-only	The type of the routing protocol instance.
OCT routingProtocolRtpName	1.3.6.1.4.1.42229.1.2.6.9.1.1.2	OCTET STRING	read-only	The name of the routing protocol instance. For system-controlled instances this name is persistent, i.e., it SHOULD NOT change across reboots.
OCT routingProtocolDescription	1.3.6.1.4.1.42229.1.2.6.9.1.1.3	OCTET STRING	read-only	Textual description of the routing protocol instance.
staticRoute	1.3.6.1.4.1.42229.1.2.6.10
staticRouteTable	1.3.6.1.4.1.42229.1.2.6.10.1		not-accessible	A list of static routes.
staticRouteEntry	1.3.6.1.4.1.42229.1.2.6.10.1.1		not-accessible	Entry of staticRouteTable
IET staticRouteDestinationPrefix	1.3.6.1.4.1.42229.1.2.6.10.1.1.1	IetfInetTypesIpv4Prefix	read-only	IPv4 destination prefix.
OCT staticRouteDescription	1.3.6.1.4.1.42229.1.2.6.10.1.1.2	OCTET STRING	read-only	Textual description of the static route.
T/F staticRouteAdvertised	1.3.6.1.4.1.42229.1.2.6.10.1.1.3	TruthValue	read-only	When set to YES, the static route is advertised in the routing protocol. For OSPF, the static route will be advertised as an AS external route, if OSPF is configured as an ASBR. default value :false
nextHop	1.3.6.1.4.1.42229.1.2.6.11
nextHopTable	1.3.6.1.4.1.42229.1.2.6.11.1		not-accessible	Configuration of static next-hop.
nextHopEntry	1.3.6.1.4.1.42229.1.2.6.11.1.1		not-accessible	Entry of nextHopTable
OCT nextHopIndex	1.3.6.1.4.1.42229.1.2.6.11.1.1.1	OCTET STRING	read-only	An user-specified identifier utilised to uniquely reference the next-hop entry in the next-hop list. The value of this index has no semantic meaning other than for referencing the entry.
NUM nextHopOutgoingInterface	1.3.6.1.4.1.42229.1.2.6.11.1.1.2	RowPointer	read-only	Reference of the outgoing interface.
ADR nextHopAddress	1.3.6.1.4.1.42229.1.2.6.11.1.1.3	IetfInetTypesIpv4Address	read-only	IPv4 address of the next-hop.
U32 nextHopMetric	1.3.6.1.4.1.42229.1.2.6.11.1.1.4	Unsigned32	read-only	metric of the next-hop. default value :0
ospf	1.3.6.1.4.1.42229.1.2.6.12
ospfTable	1.3.6.1.4.1.42229.1.2.6.12.1		not-accessible	OSPF protocol.
ospfEntry	1.3.6.1.4.1.42229.1.2.6.12.1.1		not-accessible	Entry of ospfTable
IET ospfRouterId	1.3.6.1.4.1.42229.1.2.6.12.1.1.1	IetfYangTypesDottedQuad	read-only	OSPF Router ID.
OCT ospfDescription	1.3.6.1.4.1.42229.1.2.6.12.1.1.2	OCTET STRING	read-only	Textual description of the OSPF instance.
T/F ospfAsbr	1.3.6.1.4.1.42229.1.2.6.12.1.1.3	TruthValue	read-only	OSPF Autonomous System Boundary Router. default value :true
INT ospfAdminStatus	1.3.6.1.4.1.42229.1.2.6.12.1.1.4	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT ospfOperStatus	1.3.6.1.4.1.42229.1.2.6.12.1.1.5	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
OCT ospfAliasName	1.3.6.1.4.1.42229.1.2.6.12.1.1.6	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
ospfArea	1.3.6.1.4.1.42229.1.2.6.13
ospfAreaTable	1.3.6.1.4.1.42229.1.2.6.13.1		not-accessible	Configuration of ospf area.
ospfAreaEntry	1.3.6.1.4.1.42229.1.2.6.13.1.1		not-accessible	Entry of ospfAreaTable
IET ospfAreaId	1.3.6.1.4.1.42229.1.2.6.13.1.1.1	IetfYangTypesDottedQuad	read-only	OSPF Router Area ID.
INT ospfAreaAdminStatus	1.3.6.1.4.1.42229.1.2.6.13.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT ospfAreaOperStatus	1.3.6.1.4.1.42229.1.2.6.13.1.1.3	INTEGER	read-only	The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
OCT ospfAreaAliasName	1.3.6.1.4.1.42229.1.2.6.13.1.1.4	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
INT ospfAreaType	1.3.6.1.4.1.42229.1.2.6.13.1.1.5	INTEGER	read-only	OSPF Router Area Type. default value :normal
ospfInterface	1.3.6.1.4.1.42229.1.2.6.14
ospfInterfaceTable	1.3.6.1.4.1.42229.1.2.6.14.1		not-accessible	Configuration of interface in an ospf area.
ospfInterfaceEntry	1.3.6.1.4.1.42229.1.2.6.14.1.1		not-accessible	Entry of ospfInterfaceTable
OCT ospfInterfaceOspfIfName	1.3.6.1.4.1.42229.1.2.6.14.1.1.1	OCTET STRING	read-only	Reference of the interface in OSPF area.
OCT ospfInterfaceOspfLinkpf	1.3.6.1.4.1.42229.1.2.6.14.1.1.2	OCTET STRING	read-only	Reference of the ospf link profile associated with the interface.
U32 ospfInterfaceOspfCost	1.3.6.1.4.1.42229.1.2.6.14.1.1.3	Unsigned32	read-only	OSPF link cost.
INT ospfInterfaceOspfIfRouting	1.3.6.1.4.1.42229.1.2.6.14.1.1.4	INTEGER	read-only	Specifies if Routing is enabled and if so, if Routing is passive or active. ACTIVE - This link is advertised and routing messages are transported over this link. PASSIVE - This link is advertised, routing messages are not transported over this link. default value :active
INT ospfInterfaceOspfNetworkType	1.3.6.1.4.1.42229.1.2.6.14.1.1.5	INTEGER	read-only	OSPF Interface Network Types.
ospfAdjacency	1.3.6.1.4.1.42229.1.2.6.15
ospfAdjacencyTable	1.3.6.1.4.1.42229.1.2.6.15.1		not-accessible	attributes of OSPF adjacency.
ospfAdjacencyEntry	1.3.6.1.4.1.42229.1.2.6.15.1.1		not-accessible	Entry of ospfAdjacencyTable
ADR ospfAdjacencyOspfNeighborAddress	1.3.6.1.4.1.42229.1.2.6.15.1.1.1	IetfInetTypesIpv4Address	read-only	neighbor IP address of the OSPF adjacency.
IET ospfAdjacencyNeighborRouterId	1.3.6.1.4.1.42229.1.2.6.15.1.1.2	IetfYangTypesDottedQuad	read-only	OSPF neighbor Router ID.
INT ospfAdjacencyOspfAdjStatus	1.3.6.1.4.1.42229.1.2.6.15.1.1.3	INTEGER	read-only	OSPF adjacency status.
rib	1.3.6.1.4.1.42229.1.2.6.16
ribTable	1.3.6.1.4.1.42229.1.2.6.16.1		not-accessible	Each entry represents a RIB identified by the 'name' key. All routes in a RIB MUST belong to the same address family. For each routing instance, an implementation SHOULD provide one system-controlled default RIB for each supported address family.
ribEntry	1.3.6.1.4.1.42229.1.2.6.16.1.1		not-accessible	Entry of ribTable
OCT ribName	1.3.6.1.4.1.42229.1.2.6.16.1.1.1	OCTET STRING	read-only	The name of the RIB.
INT ribAddressFamily	1.3.6.1.4.1.42229.1.2.6.16.1.1.2	INTEGER	read-only	Address family.
T/F ribDefaultRib	1.3.6.1.4.1.42229.1.2.6.16.1.1.3	TruthValue	read-only	This flag has the value of 'true' if and only if the RIB is the default RIB for the given address family. A default RIB always receives direct routes. By default it also receives routes from all routing protocols. default value :true
OCT ribDescription	1.3.6.1.4.1.42229.1.2.6.16.1.1.4	OCTET STRING	read-only	Textual description of the RIB.
route	1.3.6.1.4.1.42229.1.2.6.17
routeTable	1.3.6.1.4.1.42229.1.2.6.17.1		not-accessible	A list of static routes.
routeEntry	1.3.6.1.4.1.42229.1.2.6.17.1.1		not-accessible	Entry of routeTable
COR routeSourceProtocol	1.3.6.1.4.1.42229.1.2.6.17.1.1.1	CoriantTypesSourceProtocol	read-only	Type of the routing protocol from which the route originated.
IET routeDestinationPrefix	1.3.6.1.4.1.42229.1.2.6.17.1.1.2	IetfInetTypesIpv4Prefix	read-only	IPv4 destination prefix.
OCT routeDescription	1.3.6.1.4.1.42229.1.2.6.17.1.1.3	OCTET STRING	read-only	Textual description of the route.
U32 routePreference	1.3.6.1.4.1.42229.1.2.6.17.1.1.4	Unsigned32	read-only	This route attribute, also known as administrative distance, allows for selecting the preferred route among routes with the same destination prefix. A smaller value means a more preferred route.
T/F routeActive	1.3.6.1.4.1.42229.1.2.6.17.1.1.5	TruthValue	read-only	Indicates that the route is preferred among all routes in the same RIB that have the same destination prefix.
profiles	1.3.6.1.4.1.42229.1.2.6.18
pppProfile	1.3.6.1.4.1.42229.1.2.6.18.1
pppProfileTable	1.3.6.1.4.1.42229.1.2.6.18.1.1		not-accessible	Profile for the point-to-point interface.
pppProfileEntry	1.3.6.1.4.1.42229.1.2.6.18.1.1.1		not-accessible	Entry of pppProfileTable
OCT pppProfilePppPfName	1.3.6.1.4.1.42229.1.2.6.18.1.1.1.1	OCTET STRING	read-only	The name of the point-to-point protocol profile.
INT pppProfilePppFcsLength	1.3.6.1.4.1.42229.1.2.6.18.1.1.1.2	INTEGER	read-only	Specifies whether the frame check sequence is a 16-bit or 32-bit value. default value :16
U32 pppProfilePppMru	1.3.6.1.4.1.42229.1.2.6.18.1.1.1.3	Unsigned32	read-only	Specifies the maximum number of octets in the Information and Padding fields. UNITS:octets default value :1500
U32 pppProfilePppRestartTimer	1.3.6.1.4.1.42229.1.2.6.18.1.1.1.4	Unsigned32	read-only	Specifies the restart timer of the PPP protocol in seconds. UNITS:seconds default value :3
U32 pppProfilePppMaxFailure	1.3.6.1.4.1.42229.1.2.6.18.1.1.1.5	Unsigned32	read-only	Specifies the maximum failure value of the PPP protocol profile. default value :5
ospfLinkProfile	1.3.6.1.4.1.42229.1.2.6.18.2
ospfLinkProfileTable	1.3.6.1.4.1.42229.1.2.6.18.2.1		not-accessible	Profile for the OSPF protocol link.
ospfLinkProfileEntry	1.3.6.1.4.1.42229.1.2.6.18.2.1.1		not-accessible	Entry of ospfLinkProfileTable
OCT ospfLinkProfileOspfLinkpfName	1.3.6.1.4.1.42229.1.2.6.18.2.1.1.1	OCTET STRING	read-only	The name of the OSPF protocol link profile.
U32 ospfLinkProfileHelloInterval	1.3.6.1.4.1.42229.1.2.6.18.2.1.1.2	Unsigned32	read-only	Specifies the Hello Interval in seconds. UNITS:seconds default value :10
U32 ospfLinkProfileRouterDeadInterval	1.3.6.1.4.1.42229.1.2.6.18.2.1.1.3	Unsigned32	read-only	Specifies the Router Dead Interval in seconds. UNITS:seconds default value :40
U32 ospfLinkProfileRetransmissionInterval	1.3.6.1.4.1.42229.1.2.6.18.2.1.1.4	Unsigned32	read-only	Specifies the Retransmission Interval in seconds. UNITS:seconds default value :5
oscx	1.3.6.1.4.1.42229.1.2.6.19
oscxTable	1.3.6.1.4.1.42229.1.2.6.19.1		not-accessible	OSCX (Optical Supervisory Channel Extended) interface
oscxEntry	1.3.6.1.4.1.42229.1.2.6.19.1.1		not-accessible	Entry of oscxTable
INT oscxChannel	1.3.6.1.4.1.42229.1.2.6.19.1.1.1	INTEGER	read-only	Specifies the OSCX channel within the Optical Supervisory Channel.
NUM oscxResourceRef	1.3.6.1.4.1.42229.1.2.6.19.1.1.2	RowPointer	read-only	Reference of the lower layer resource associated with this interface.
OCT oscxAliasName	1.3.6.1.4.1.42229.1.2.6.19.1.1.3	OCTET STRING	read-only	User defined alias for this entity. Must be an alphanumeric string with dash or underscore
security	1.3.6.1.4.1.42229.1.2.7
securityInfo	1.3.6.1.4.1.42229.1.2.7.1
OCT securitySshPublicKey	1.3.6.1.4.1.42229.1.2.7.1.1	OCTET STRING	read-only	The system's public key for use with SSH or SFTP.This is a leaf list, encode by some leafs.
OCT securitySshPublicKeyFingerprint	1.3.6.1.4.1.42229.1.2.7.1.2	OCTET STRING	read-only	The fingerprint of the system's public key.This is a leaf list, encode by some leafs.
OCT securityPreLoginMessage	1.3.6.1.4.1.42229.1.2.7.1.3	OCTET STRING	read-only	Welcome message displayed before user login default value :**************************************** Warning ************************************** This system is restricted to authorized users for business purposes. Unauthorized access is a violation of the law. This service may be monitored for administrative and security reasons. By proceeding, you consent to this monitoring. *******************************************************************************************
OCT securityWarningMessage	1.3.6.1.4.1.42229.1.2.7.1.4	OCTET STRING	read-only	Welcome message displayed after user login default value :**************************************** Warning ************************************** This system is restricted to authorized users for business purposes. Unauthorized access is a violation of the law. This service may be monitored for administrative and security reasons. By proceeding, you consent to this monitoring. *******************************************************************************************
INT securityAaaAuthenticationMethod	1.3.6.1.4.1.42229.1.2.7.1.5	INTEGER	read-only	specify authentication method for the user login to the NE. default value :local-only
INT securitySystemFips	1.3.6.1.4.1.42229.1.2.7.1.6	INTEGER	read-only	specifies whether the system security is operating in compliance with FIPS. default value :disabled
COR securityHttpSupport	1.3.6.1.4.1.42229.1.2.7.1.7	CoriantTypesEnableSwitch	read-only	Defines whether unsecure HTTP protocol is allowed; includes file transfer, or any other application that uses HTTP default value :disabled
user	1.3.6.1.4.1.42229.1.2.7.2
userTable	1.3.6.1.4.1.42229.1.2.7.2.1		not-accessible	NULL
userEntry	1.3.6.1.4.1.42229.1.2.7.2.1.1		not-accessible	Entry of userTable
COR userName	1.3.6.1.4.1.42229.1.2.7.2.1.1.1	CoriantTypesUserName	read-only	User name.
OCT userPassword	1.3.6.1.4.1.42229.1.2.7.2.1.1.2	OCTET STRING	read-only	The password of the user.
INT userClass	1.3.6.1.4.1.42229.1.2.7.2.1.1.3	INTEGER	read-only	The access class for the user. default value :supervision
U32 userMaxInvalidLogin	1.3.6.1.4.1.42229.1.2.7.2.1.1.4	Unsigned32	read-only	This attribute is the maximum number of consecutive and invalid login attempts before an account is suspended (lockedout). default value :3
U32 userSuspensionTime	1.3.6.1.4.1.42229.1.2.7.2.1.1.5	Unsigned32	read-only	This attribute is the duration of UID suspension following consecutive invalid login attempts. Setting the value to 0 disables this attribute. UNITS:seconds default value :60
U32 userTimeout	1.3.6.1.4.1.42229.1.2.7.2.1.1.6	Unsigned32	read-only	This attribute is the Session Time Out Interval. If there are no messages between the user and the NE over the Time Out interval, the session is logged off. Setting the value to 0 disables this attribute (meaning the session will not time out). UNITS:minutes default value :30
U32 userPasswordAgingInterval	1.3.6.1.4.1.42229.1.2.7.2.1.1.7	Unsigned32	read-only	This attribute is the Password Aging Interval. Setting the value to 0 disables this attribute. UNITS:days default value :0
IET userPasswordExpirationDate	1.3.6.1.4.1.42229.1.2.7.2.1.1.8	IetfYangTypesDateAndTime	read-only	This attribute shows the password expiration date.
INT userAdminStatus	1.3.6.1.4.1.42229.1.2.7.2.1.1.9	INTEGER	read-only	The attribute allows administrators to modify the user administration status. default value :enabled
INT userStatus	1.3.6.1.4.1.42229.1.2.7.2.1.1.10	INTEGER	read-only	This attribute shows the user status. User with status 'enabled' will have access to the system. User with status 'disabled' not have access to the system. User with status 'password-aged' will have access to the system but will be forced to change his password on first-time login. User with status 'lockout' means the account is locked out due to unsuccessful login attempts. default value :disabled
U32 userMaxSessions	1.3.6.1.4.1.42229.1.2.7.2.1.1.11	Unsigned32	read-only	This attribute specifies the maximum number of sessions allowed for this user. default value :6
IET userLastLoginDate	1.3.6.1.4.1.42229.1.2.7.2.1.1.12	IetfYangTypesDateAndTime	read-only	The last login date/time of the user. default value :1970-01-01T00:00:00Z
INT userAaaType	1.3.6.1.4.1.42229.1.2.7.2.1.1.13	INTEGER	read-only	Indicates the authentication method of the user. default value :local
session	1.3.6.1.4.1.42229.1.2.7.3
sessionTable	1.3.6.1.4.1.42229.1.2.7.3.1		not-accessible	NULL
sessionEntry	1.3.6.1.4.1.42229.1.2.7.3.1.1		not-accessible	Entry of sessionTable
COR sessionId	1.3.6.1.4.1.42229.1.2.7.3.1.1.1	CoriantTypesSessionId	read-only	Specifies a unique identifier of the current session. It indicates the IP address and transport layer port number associated with this session. If the session is initiated from the serial port, the value is 'NA'.
NUM sessionUser	1.3.6.1.4.1.42229.1.2.7.3.1.1.2	RowPointer	read-only	Points to a user instance.
INT sessionType	1.3.6.1.4.1.42229.1.2.7.3.1.1.3	INTEGER	read-only	Session type.
INT sessionProtocol	1.3.6.1.4.1.42229.1.2.7.3.1.1.4	INTEGER	read-only	Indicates which protocol has been used to establish the session.
IET sessionCreatedTime	1.3.6.1.4.1.42229.1.2.7.3.1.1.5	IetfYangTypesDateAndTime	read-only	The timestamp the user has created this session.
aaaServer	1.3.6.1.4.1.42229.1.2.7.4
aaaServerTable	1.3.6.1.4.1.42229.1.2.7.4.1		not-accessible	NULL
aaaServerEntry	1.3.6.1.4.1.42229.1.2.7.4.1.1		not-accessible	Entry of aaaServerTable
OCT aaaServerServerName	1.3.6.1.4.1.42229.1.2.7.4.1.1.1	OCTET STRING	read-only	specify the name of aaa server.
U32 aaaServerServerPriority	1.3.6.1.4.1.42229.1.2.7.4.1.1.2	Unsigned32	read-only	This is used to sort the servers in the order of precedence.
INT aaaServerProtocolSupported	1.3.6.1.4.1.42229.1.2.7.4.1.1.3	INTEGER	read-only	specify the protocol used for AAA. default value :TACACSPLUS
ADR aaaServerServerIp	1.3.6.1.4.1.42229.1.2.7.4.1.1.4	IetfInetTypesIpv4Address	read-only	The IPv4 address of AAA server.
IET aaaServerServerPort	1.3.6.1.4.1.42229.1.2.7.4.1.1.5	IetfInetTypesPortNumber	read-only	AAA server port number. default value :49
OCT aaaServerSharedSecret	1.3.6.1.4.1.42229.1.2.7.4.1.1.6	OCTET STRING	read-only	The shared secret of the aaa server. The shared secret will be displayed as *. default value :sharedkey
BIT aaaServerRoleSupported	1.3.6.1.4.1.42229.1.2.7.4.1.1.7	Bits	read-only	specify the role of the server for AAA. default value :authentication authorization
INT aaaServerAdminStatus	1.3.6.1.4.1.42229.1.2.7.4.1.1.8	INTEGER	read-only	The administrative state specifes the permission to use or prohibition against using the resource. The administrative state can be modified by the user. default value :up
U32 aaaServerTimeOut	1.3.6.1.4.1.42229.1.2.7.4.1.1.9	Unsigned32	read-only	Specifies the response timeout of Access-Request messages sent to a AAA server in seconds. UNITS:seconds default value :5
U32 aaaServerRetry	1.3.6.1.4.1.42229.1.2.7.4.1.1.10	Unsigned32	read-only	Specifies the number of attempted Access-Request messages to a single AAA server before failing authentication. default value :3
keySyncSession	1.3.6.1.4.1.42229.1.2.7.5
keySyncSessionTable	1.3.6.1.4.1.42229.1.2.7.5.1		not-accessible	TLS session to synchronize ODU encryption key.
keySyncSessionEntry	1.3.6.1.4.1.42229.1.2.7.5.1.1		not-accessible	Entry of keySyncSessionTable
U32 keySyncSessionId	1.3.6.1.4.1.42229.1.2.7.5.1.1.1	Unsigned32	read-only	Specifies a unique identifier of the key synchronization session.
INT keySyncSessionAdminStatus	1.3.6.1.4.1.42229.1.2.7.5.1.1.2	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
INT keySyncSessionSessionStatus	1.3.6.1.4.1.42229.1.2.7.5.1.1.4	INTEGER	read-only	Indicating the status of key sync session.
ADR keySyncSessionRemoteIp	1.3.6.1.4.1.42229.1.2.7.5.1.1.5	IetfInetTypesIpv4Address	read-only	The IP address of remote session server.
IET keySyncSessionRemotePort	1.3.6.1.4.1.42229.1.2.7.5.1.1.6	IetfInetTypesPortNumber	read-only	The port number of remote session server. default value :8443
ADR keySyncSessionLocalIp	1.3.6.1.4.1.42229.1.2.7.5.1.1.7	IetfInetTypesIpv4Address	read-only	The source IP address of a manual session.
IET keySyncSessionLocalPort	1.3.6.1.4.1.42229.1.2.7.5.1.1.8	IetfInetTypesPortNumber	read-only	The source port number of a manual session.
OCT keySyncSessionSourceAddressFrom	1.3.6.1.4.1.42229.1.2.7.5.1.1.9	OCTET STRING	read-only	specifies the interface of the source IP address of the outgoing packets. Conditions:../key-sync-session-type = 'manual' default value :auto
IET keySyncSessionConnectedTime	1.3.6.1.4.1.42229.1.2.7.5.1.1.10	IetfYangTypesDateAndTime	read-only	The timestamp the user has created this session.
INT keySyncSessionType	1.3.6.1.4.1.42229.1.2.7.5.1.1.11	INTEGER	read-only	Indicating the type of key sync session, 'manual' is for the session user configured, and 'auto' is for the session automatically created by system. default value :manual
INT keySyncSessionAuthType	1.3.6.1.4.1.42229.1.2.7.5.1.1.12	INTEGER	read-only	Indicating the authentication type of the key sync session. default value :proprietary-psk
OCT keySyncSessionLocalCertificate	1.3.6.1.4.1.42229.1.2.7.5.1.1.13	OCTET STRING	read-only	Previously installed certificate that authenticates the NE. default value :none
pskMap	1.3.6.1.4.1.42229.1.2.7.7
pskMapTable	1.3.6.1.4.1.42229.1.2.7.7.1		not-accessible	NULL
pskMapEntry	1.3.6.1.4.1.42229.1.2.7.7.1.1		not-accessible	Entry of pskMapTable
OCT pskMapPskIdentity	1.3.6.1.4.1.42229.1.2.7.7.1.1.1	OCTET STRING	read-only	The PSK identity encoded as a UTF-8 string. For details how certain common PSK identity formats can be encoded in UTF-8, see section 5.1. of RFC 4279.
STR pskMapKey	1.3.6.1.4.1.42229.1.2.7.7.1.1.2	IetfYangTypesHexString	read-only	The key associated with the PSK identity
INT pskMapPskStatus	1.3.6.1.4.1.42229.1.2.7.7.1.1.4	INTEGER	read-only	Status of the psk-map. psk-map can be updated only if psk-status is in init or sync status; the previous psk-map updating can be cancelled only if psk-satus is updating; psk-map cannot be updated and previous psk-map updating cannot be cancelled if psk-status is candidate-key-authenticate. default value :init
OCT pskMapPskInfo	1.3.6.1.4.1.42229.1.2.7.7.1.1.5	OCTET STRING	read-only	The label of the psk-map. default value :
U32 pskMapWarningTimer	1.3.6.1.4.1.42229.1.2.7.7.1.1.6	Unsigned32	read-only	Warning Time before psk-map updating completes. UNITS:minutes default value :5
U32 pskMapCriticalTimer	1.3.6.1.4.1.42229.1.2.7.7.1.1.7	Unsigned32	read-only	Critical time before psk-map updating completes. UNITS:minutes default value :30
U32 pskMapTrafficOffTimer	1.3.6.1.4.1.42229.1.2.7.7.1.1.8	Unsigned32	read-only	Traffic off time before psk-map updating completes. UNITS:minutes default value :1440
IET pskMapEffectiveTimestamp	1.3.6.1.4.1.42229.1.2.7.7.1.1.9	IetfYangTypesDateAndTime	read-only	Indicates the Time of new psk starts to take effect.
key	1.3.6.1.4.1.42229.1.2.7.9
keyTable	1.3.6.1.4.1.42229.1.2.7.9.1		not-accessible	A key maintained by the keystore.
keyEntry	1.3.6.1.4.1.42229.1.2.7.9.1.1		not-accessible	Entry of keyTable
OCT keyName	1.3.6.1.4.1.42229.1.2.7.9.1.1.1	OCTET STRING	read-only	An arbitrary name for the key.
INT keyAlgorithmIdentifier	1.3.6.1.4.1.42229.1.2.7.9.1.1.2	INTEGER	read-only	Identifies which algorithm is to be used with the key. This value determines how the 'private-key' and 'public-key' fields are interpreted.
OCT keyPublicKey	1.3.6.1.4.1.42229.1.2.7.9.1.1.3	OCTET STRING	read-only	A binary string that contains the value of the public key. The interpretation of the content is defined in the registration of the key algorithm. For example, a DSA key is an INTEGER, an RSA key is represented as RSAPublicKey as defined in [RFC3447], and an Elliptic Curve Cryptography (ECC) key is represented using the 'publicKey' described in [RFC5915]
certificate	1.3.6.1.4.1.42229.1.2.7.10
certificateTable	1.3.6.1.4.1.42229.1.2.7.10.1		not-accessible	A certificate for this private key.
certificateEntry	1.3.6.1.4.1.42229.1.2.7.10.1.1		not-accessible	Entry of certificateTable
OCT certificateName	1.3.6.1.4.1.42229.1.2.7.10.1.1.1	OCTET STRING	read-only	An arbitrary name for the certificate. The name must be a unique across all keys, not just within this key.
INT certificateVersion	1.3.6.1.4.1.42229.1.2.7.10.1.1.2	INTEGER	read-only	version of the certificate. default value :x509v1
OCT certificateSerialNumber	1.3.6.1.4.1.42229.1.2.7.10.1.1.3	OCTET STRING	read-only	serial number of the certificate.
OCT certificateSignatureAlgorithm	1.3.6.1.4.1.42229.1.2.7.10.1.1.4	OCTET STRING	read-only	signature algorithm of the certificate.
OCT certificateIssuer	1.3.6.1.4.1.42229.1.2.7.10.1.1.5	OCTET STRING	read-only	issuer of the certificate.
OCT certificateValidFrom	1.3.6.1.4.1.42229.1.2.7.10.1.1.6	OCTET STRING	read-only	valid-from date and time of the certificate.
OCT certificateValidTo	1.3.6.1.4.1.42229.1.2.7.10.1.1.7	OCTET STRING	read-only	valid-to date and time of the certificate.
OCT certificateSubject	1.3.6.1.4.1.42229.1.2.7.10.1.1.8	OCTET STRING	read-only	subject of the certificate.
OCT certificatePublicKeyAlgorithm	1.3.6.1.4.1.42229.1.2.7.10.1.1.9	OCTET STRING	read-only	public-key-algorithm of the certificate.
trustedCertificateGroup	1.3.6.1.4.1.42229.1.2.7.11
trustedCertificateGroupTable	1.3.6.1.4.1.42229.1.2.7.11.1		not-accessible	A list of trusted certificates. These certificates can be used by a server to authenticate clients, or by clients to authenticate servers. The certificates may be endpoint specific or for certificate authorities, to authenticate many clients at once. Each list of certificates SHOULD be specific to a purpose, as the list as a whole may be referenced by other modules. For instance, a NETCONF server model might point to a list of certificates to use when authenticating client certificates.
trustedCertificateGroupEntry	1.3.6.1.4.1.42229.1.2.7.11.1.1		not-accessible	Entry of trustedCertificateGroupTable
OCT trustedCertificateGroupName	1.3.6.1.4.1.42229.1.2.7.11.1.1.1	OCTET STRING	read-only	An arbitrary name for this list of trusted certificates.
trustedCertificate	1.3.6.1.4.1.42229.1.2.7.12
trustedCertificateTable	1.3.6.1.4.1.42229.1.2.7.12.1		not-accessible	A trusted certificate for a specific use. Note, this 'certificate' is a list in order to encode any associated intermediate certificates.
trustedCertificateEntry	1.3.6.1.4.1.42229.1.2.7.12.1.1		not-accessible	Entry of trustedCertificateTable
OCT trustedCertificateName	1.3.6.1.4.1.42229.1.2.7.12.1.1.1	OCTET STRING	read-only	An arbitrary name for this trusted certificate. Must be unique across all lists of trusted certificates (not just this list) so that a leafref to it from another module can resolve to unique values.
INT trustedCertificateVersion	1.3.6.1.4.1.42229.1.2.7.12.1.1.2	INTEGER	read-only	version of the certificate. default value :x509v1
OCT trustedCertificateSerialNumber	1.3.6.1.4.1.42229.1.2.7.12.1.1.3	OCTET STRING	read-only	serial number of the certificate.
OCT trustedCertificateSignatureAlgorithm	1.3.6.1.4.1.42229.1.2.7.12.1.1.4	OCTET STRING	read-only	signature algorithm of the certificate.
OCT trustedCertificateIssuer	1.3.6.1.4.1.42229.1.2.7.12.1.1.5	OCTET STRING	read-only	issuer of the certificate.
OCT trustedCertificateValidFrom	1.3.6.1.4.1.42229.1.2.7.12.1.1.6	OCTET STRING	read-only	valid-from date and time of the certificate.
OCT trustedCertificateValidTo	1.3.6.1.4.1.42229.1.2.7.12.1.1.7	OCTET STRING	read-only	valid-to date and time of the certificate.
OCT trustedCertificateSubject	1.3.6.1.4.1.42229.1.2.7.12.1.1.8	OCTET STRING	read-only	subject of the certificate.
OCT trustedCertificatePublicKeyAlgorithm	1.3.6.1.4.1.42229.1.2.7.12.1.1.9	OCTET STRING	read-only	public-key-algorithm of the certificate.
nbi	1.3.6.1.4.1.42229.1.2.8
snmp	1.3.6.1.4.1.42229.1.2.8.1
snmpv3	1.3.6.1.4.1.42229.1.2.8.1.1
snmpv3Table	1.3.6.1.4.1.42229.1.2.8.1.1.1		not-accessible	SNMPv3 configuration for user
snmpv3Entry	1.3.6.1.4.1.42229.1.2.8.1.1.1.1		not-accessible	Entry of snmpv3Table
INT snmpv3UserSecLevel	1.3.6.1.4.1.42229.1.2.8.1.1.1.1.1	INTEGER	read-only	Specifies the SNMPv3 user security level. default value :no-auth-no-priv
INT snmpv3AuthProtocol	1.3.6.1.4.1.42229.1.2.8.1.1.1.1.2	INTEGER	read-only	Specifies the authentication protocol that the SNMPv3 user being created will use. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv') default value :SHA
OCT snmpv3AuthPassphrase	1.3.6.1.4.1.42229.1.2.8.1.1.1.1.3	OCTET STRING	read-only	Specifies the SNMPv3 authentication pass phrase. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv')
INT snmpv3PrivProtocol	1.3.6.1.4.1.42229.1.2.8.1.1.1.1.4	INTEGER	read-only	Specifies the privacy protocol that the SNMPv3 user being created will use. Conditions:../user-sec-level = 'auth-priv' default value :AES
OCT snmpv3PrivPassphrase	1.3.6.1.4.1.42229.1.2.8.1.1.1.1.5	OCTET STRING	read-only	Specifies the SNMPv3 privacy pass phrase. Conditions:../user-sec-level = 'auth-priv'
snmpInfo	1.3.6.1.4.1.42229.1.2.8.1.2
OCT snmpEngineId	1.3.6.1.4.1.42229.1.2.8.1.2.1	OCTET STRING	read-only	snmp EngineID of the NE. The EngineID will follow the EngineID format 3 defined in RFC3411. The MAC address in the Engine ID will be the first MAC address of the MAC addresses Pool of the NE.
snmpCommunity	1.3.6.1.4.1.42229.1.2.8.1.3
snmpCommunityTable	1.3.6.1.4.1.42229.1.2.8.1.3.1		not-accessible	List of SNMP Community Strings. Please note that the trap-community-string is located in the snmp-target MO.
snmpCommunityEntry	1.3.6.1.4.1.42229.1.2.8.1.3.1.1		not-accessible	Entry of snmpCommunityTable
STR snmpCommunityCommunityString	1.3.6.1.4.1.42229.1.2.8.1.3.1.1.1	CoriantTypesSnmpString	read-only	Community String.
INT snmpCommunityCommunityStringAccess	1.3.6.1.4.1.42229.1.2.8.1.3.1.1.2	INTEGER	read-only	snmp access right of this community string. default value :read-only
snmpTarget	1.3.6.1.4.1.42229.1.2.8.1.4
snmpTargetTable	1.3.6.1.4.1.42229.1.2.8.1.4.1		not-accessible	List of SNMP targets (trap listeners)
snmpTargetEntry	1.3.6.1.4.1.42229.1.2.8.1.4.1.1		not-accessible	Entry of snmpTargetTable
INT snmpTargetSnmpVersion	1.3.6.1.4.1.42229.1.2.8.1.4.1.1.1	INTEGER	read-only	snmp version. default value :v2c
NUM snmpTargetSnmpv3User	1.3.6.1.4.1.42229.1.2.8.1.4.1.1.2	RowPointer	read-only	Indicate the snmpv3 user. Conditions:../snmp-version = 'v3'
OCT snmpTargetTargetName	1.3.6.1.4.1.42229.1.2.8.1.4.1.1.3	OCTET STRING	read-only	Identifies the SNMP target
ADR snmpTargetTargetIp	1.3.6.1.4.1.42229.1.2.8.1.4.1.1.4	IetfInetTypesIpv4Address	read-only	IP address of the SNMP target
IET snmpTargetTargetPort	1.3.6.1.4.1.42229.1.2.8.1.4.1.1.5	IetfInetTypesPortNumber	read-only	UDP port number. default value :162
INT snmpTargetTargetTransport	1.3.6.1.4.1.42229.1.2.8.1.4.1.1.6	INTEGER	read-only	Type of transport for the SNMP target default value :udp
STR snmpTargetTrapCommunityString	1.3.6.1.4.1.42229.1.2.8.1.4.1.1.7	CoriantTypesSnmpString	read-only	Community string used for SNMP traps Conditions:../snmp-version = 'v2c' default value :groove
cli	1.3.6.1.4.1.42229.1.2.8.2
cliConfig	1.3.6.1.4.1.42229.1.2.8.2.1
cliConfigTable	1.3.6.1.4.1.42229.1.2.8.2.1.1		not-accessible	NULL
cliConfigEntry	1.3.6.1.4.1.42229.1.2.8.2.1.1.1		not-accessible	Entry of cliConfigTable
U32 cliConfigCliLines	1.3.6.1.4.1.42229.1.2.8.2.1.1.1.1	Unsigned32	read-only	Number of rows to be used for display. This value is automatically discovered when possible default value :40
U32 cliConfigCliColumns	1.3.6.1.4.1.42229.1.2.8.2.1.1.1.2	Unsigned32	read-only	Number of columns to be used for display. This value is automatically discovered when possible default value :140
U32 cliConfigMaxHistorySize	1.3.6.1.4.1.42229.1.2.8.2.1.1.1.3	Unsigned32	read-only	Command history maximum size for the current session default value :500
COR cliConfigInteractiveMode	1.3.6.1.4.1.42229.1.2.8.2.1.1.1.4	CoriantTypesEnableSwitch	read-only	This determines if the CLI shall issue interactive prompt (e.g. for prompting additional information, or for confirmation of user initiated actions). Enabled = CLI will prompt user (default) Disabled = CLI will suppress any prompt to the user This parameter is set per CLI session and is not persistent. default value :enabled
restconf	1.3.6.1.4.1.42229.1.2.8.3
COR restconfRestHttpSupport	1.3.6.1.4.1.42229.1.2.8.3.1	CoriantTypesEnableSwitch	read-only	Defines if the HTTP port (8080) is enabled for RESTCONF default value :disabled
COR restconfRestHttpsSupport	1.3.6.1.4.1.42229.1.2.8.3.2	CoriantTypesEnableSwitch	read-only	Defines if the HTTPS port (8181) is enabled for RESTCONF default value :enabled
U32 restconfRestSessionTimeout	1.3.6.1.4.1.42229.1.2.8.3.3	Unsigned32	read-only	Timeout of a cookie based RESTCONF session. The cookie expiration date is reset every time there is activity on the session. UNITS:minutes default value :5
cliAlias	1.3.6.1.4.1.42229.1.2.8.4
cliAliasTable	1.3.6.1.4.1.42229.1.2.8.4.1		not-accessible	List of aliases used in CLI. Can only be accessed via 'alias/unalias' CLI commands.
cliAliasEntry	1.3.6.1.4.1.42229.1.2.8.4.1.1		not-accessible	Entry of cliAliasTable
OCT cliAliasName	1.3.6.1.4.1.42229.1.2.8.4.1.1.1	OCTET STRING	read-only	Name of the alias
OCT cliAliasValue	1.3.6.1.4.1.42229.1.2.8.4.1.1.2	OCTET STRING	read-only	Value of the alias
cliScript	1.3.6.1.4.1.42229.1.2.8.5
cliScriptTable	1.3.6.1.4.1.42229.1.2.8.5.1		not-accessible	List of available CLI scripts. Scripts can be executed with the 'run' command
cliScriptEntry	1.3.6.1.4.1.42229.1.2.8.5.1.1		not-accessible	Entry of cliScriptTable
OCT cliScriptScriptName	1.3.6.1.4.1.42229.1.2.8.5.1.1.1	OCTET STRING	read-only	File name of the CLI script
OCT cliScriptDescription	1.3.6.1.4.1.42229.1.2.8.5.1.1.2	OCTET STRING	read-only	Description of the CLI script
filesw	1.3.6.1.4.1.42229.1.2.9
softwareload	1.3.6.1.4.1.42229.1.2.9.2
softwareloadTable	1.3.6.1.4.1.42229.1.2.9.2.1		not-accessible	The list of the software loads in the system.
softwareloadEntry	1.3.6.1.4.1.42229.1.2.9.2.1.1		not-accessible	Entry of softwareloadTable
U32 softwareloadSwloadId	1.3.6.1.4.1.42229.1.2.9.2.1.1.1	Unsigned32	read-only	software load identifier which is uniquely identify specific software load.
INT softwareloadSwloadState	1.3.6.1.4.1.42229.1.2.9.2.1.1.2	INTEGER	read-only	Indicates the state of the software load.
COR softwareloadSwloadVersion	1.3.6.1.4.1.42229.1.2.9.2.1.1.3	CoriantFileSwTypesSwVersion	read-only	Indicates the software version of the software load.
COR softwareloadSwloadVendor	1.3.6.1.4.1.42229.1.2.9.2.1.1.4	CoriantFileSwTypesSwloadVendor	read-only	Vendor information of the software load.
COR softwareloadSwloadProduct	1.3.6.1.4.1.42229.1.2.9.2.1.1.5	CoriantFileSwTypesSwloadProduct	read-only	Indicates the network element family this software belongs to.
OCT softwareloadSwloadLabel	1.3.6.1.4.1.42229.1.2.9.2.1.1.6	OCTET STRING	read-only	The label of the software load including summary information.
database	1.3.6.1.4.1.42229.1.2.9.3
databaseTable	1.3.6.1.4.1.42229.1.2.9.3.1		not-accessible	The list of the databases in the system.
databaseEntry	1.3.6.1.4.1.42229.1.2.9.3.1.1		not-accessible	Entry of databaseTable
U32 databaseId	1.3.6.1.4.1.42229.1.2.9.3.1.1.1	Unsigned32	read-only	database identifier which is uniquely identify specific database.
INT databaseState	1.3.6.1.4.1.42229.1.2.9.3.1.1.2	INTEGER	read-only	Indicates the state of the database.
COR databaseVersion	1.3.6.1.4.1.42229.1.2.9.3.1.1.3	CoriantFileSwTypesSwVersion	read-only	Indicates the database version.
COR databaseVendor	1.3.6.1.4.1.42229.1.2.9.3.1.1.4	CoriantFileSwTypesSwloadVendor	read-only	Vendor information of the database.
COR databaseProduct	1.3.6.1.4.1.42229.1.2.9.3.1.1.5	CoriantFileSwTypesSwloadProduct	read-only	Indicates the network element family this database belongs to.
OCT databaseBackupTime	1.3.6.1.4.1.42229.1.2.9.3.1.1.6	OCTET STRING	read-only	Indicates the database last backup time. default value :
fwVersionMap	1.3.6.1.4.1.42229.1.2.9.4
fwVersionMapTable	1.3.6.1.4.1.42229.1.2.9.4.1		not-accessible	The firmware information of the upgradable devices included in the software load.
fwVersionMapEntry	1.3.6.1.4.1.42229.1.2.9.4.1.1		not-accessible	Entry of fwVersionMapTable
COR fwVersionMapDeviceName	1.3.6.1.4.1.42229.1.2.9.4.1.1.1	CoriantFileSwTypesDeviceName	read-only	Indicates the name of the device.
COR fwVersionMapDeviceFwVersion	1.3.6.1.4.1.42229.1.2.9.4.1.1.2	CoriantFileSwTypesDeviceFwVersion	read-only	Indicates the version of the firmware.
currentFwVersion	1.3.6.1.4.1.42229.1.2.9.5
currentFwVersionTable	1.3.6.1.4.1.42229.1.2.9.5.1		not-accessible	The firmware information of the upgradable devices included in the software load.
currentFwVersionEntry	1.3.6.1.4.1.42229.1.2.9.5.1.1		not-accessible	Entry of currentFwVersionTable
NUM currentFwVersionEquipmentEntity	1.3.6.1.4.1.42229.1.2.9.5.1.1.1	RowPointer	read-only	Indicates the entity of the equipment carrying the device.
COR currentFwVersionFwEquipmentType	1.3.6.1.4.1.42229.1.2.9.5.1.1.2	CoriantTypesEquipmentType	read-only	Indicates the type of the equipment carrying the device.
COR currentFwVersionDeviceName	1.3.6.1.4.1.42229.1.2.9.5.1.1.3	CoriantFileSwTypesDeviceName	read-only	Indicates the name of the device.
COR currentFwVersionDeviceFwVersion	1.3.6.1.4.1.42229.1.2.9.5.1.1.4	CoriantFileSwTypesDeviceFwVersion	read-only	Indicates the version of the firmware.
INT currentFwVersionFwState	1.3.6.1.4.1.42229.1.2.9.5.1.1.5	INTEGER	read-only	Indicates firmware state of the device. Current: indicates the loaded firmware is the version of current software load. Not-current: indicates the loaded firmware is not the version of current software load. default value :not-available
rollbackPoint	1.3.6.1.4.1.42229.1.2.9.6
rollbackPointTable	1.3.6.1.4.1.42229.1.2.9.6.1		not-accessible	Represents a rollback point stored in the system. A rollback point represents the system configuration of a specific point in time, that the user may create with the 'create-rollback-point' command, visualize with the 'diff' command' and rollback to with the 'rollback' command. The system is able to store up to 10 rollback-points, rolling over old instances as new ones are created. The incremental IDs of 1..10 are automatically generated by the system whenever the rollback-point is created. Rollback points can be deleted as any normal object. A special 'backup' rollback-point can also be created with ID 0; unlike normal rollback-points, this instance will be kept even after activation with the 'rollback' RPC.
rollbackPointEntry	1.3.6.1.4.1.42229.1.2.9.6.1.1		not-accessible	Entry of rollbackPointTable
U32 rollbackPointId	1.3.6.1.4.1.42229.1.2.9.6.1.1.1	Unsigned32	read-only	Integer ID of the rollback-point. Generated dynamically whenever a rollback-point is created, with range 1 to 100
IET rollbackPointCreationTime	1.3.6.1.4.1.42229.1.2.9.6.1.1.2	IetfYangTypesDateAndTime	read-only	Timestamp when this rollback-point was created
COR rollbackPointCreationTrigger	1.3.6.1.4.1.42229.1.2.9.6.1.1.3	CoriantTypesUserName	read-only	Describes the author user-name of this rollback-point
OCT rollbackPointDescription	1.3.6.1.4.1.42229.1.2.9.6.1.1.4	OCTET STRING	read-only	User defined description of this rollback-point
INT rollbackPointType	1.3.6.1.4.1.42229.1.2.9.6.1.1.5	INTEGER	read-only	The type of the rollback-point default value :normal
logServer	1.3.6.1.4.1.42229.1.2.9.8
logServerTable	1.3.6.1.4.1.42229.1.2.9.8.1		not-accessible	Grouping the configuration parameters for log forwarding.
logServerEntry	1.3.6.1.4.1.42229.1.2.9.8.1.1		not-accessible	Entry of logServerTable
OCT logServerName	1.3.6.1.4.1.42229.1.2.9.8.1.1.1	OCTET STRING	read-only	The name for the endpoint to forwarding logs to.
ADR logServerIpAddress	1.3.6.1.4.1.42229.1.2.9.8.1.1.2	IetfInetTypesIpv4Address	read-only	The leaf uniquely specifies the ipv4 address of the remote host.
INT logServerTransport	1.3.6.1.4.1.42229.1.2.9.8.1.1.3	INTEGER	read-only	It is the transport protocol used when forwarding logs. default value :udp
IET logServerPort	1.3.6.1.4.1.42229.1.2.9.8.1.1.4	IetfInetTypesPortNumber	read-only	This leaf specifies the port number used to deliver messages to the remote server. default value :514
COR logServerDestinationFacilityType	1.3.6.1.4.1.42229.1.2.9.8.1.1.5	CoriantTypesEnableSwitch	read-only	Switching of the function destination-facility default value :disabled
OCT logServerDestinationFacility	1.3.6.1.4.1.42229.1.2.9.8.1.1.6	OCTET STRING	read-only	This leaf specifies the facility used in messages delivered to the remote server. default value :23
logFacility	1.3.6.1.4.1.42229.1.2.9.10
logFacilityTable	1.3.6.1.4.1.42229.1.2.9.10.1		not-accessible	NULL
logFacilityEntry	1.3.6.1.4.1.42229.1.2.9.10.1.1		not-accessible	Entry of logFacilityTable
INT logFacilityLogSelectorFacility	1.3.6.1.4.1.42229.1.2.9.10.1.1.1	INTEGER	read-only	The leaf uniquely identifies a syslog facility for forwarding.
INT logFacilityLogSelectorSeverity	1.3.6.1.4.1.42229.1.2.9.10.1.1.2	INTEGER	read-only	The system log selected severity level for forwarding default value :debug
INT logFacilityCompareOp	1.3.6.1.4.1.42229.1.2.9.10.1.1.3	INTEGER	read-only	This leaf describes the option to specify how the severity comparison is performed. default value :equals-or-higher
timeManager	1.3.6.1.4.1.42229.1.2.10
timeManagerInfo	1.3.6.1.4.1.42229.1.2.10.1
INT timeManagerTimezone	1.3.6.1.4.1.42229.1.2.10.1.1	INTEGER	read-only	Indicates the Name of the Time Zone of this NE. default value :Greenwich_Mean_Time:Dublin-Edinburgh-Lisbon-London[GMT]
IET timeManagerCurrentTime	1.3.6.1.4.1.42229.1.2.10.1.2	IetfYangTypesDateAndTime	read-only	Indicates the current Date and Time of this NE.
IET timeManagerLastStartTime	1.3.6.1.4.1.42229.1.2.10.1.3	IetfYangTypesDateAndTime	read-only	Indicate the time of last system boot.
OCT timeManagerUpTime	1.3.6.1.4.1.42229.1.2.10.1.4	OCTET STRING	read-only	Indicate how long the system has been running.
INT timeManagerTimeSourceState	1.3.6.1.4.1.42229.1.2.10.1.5	INTEGER	read-only	Indicates the state of the time source.
ntp	1.3.6.1.4.1.42229.1.2.10.2
T/F ntpEnabled	1.3.6.1.4.1.42229.1.2.10.2.1	TruthValue	read-only	Indicates if NTP is enabled. default value :false
ADR ntpCurrentTimeSource	1.3.6.1.4.1.42229.1.2.10.2.2	IetfInetTypesIpv4AddressNoZone	read-only	Indicates the current time source. default value :0.0.0.0
ntpAssociation	1.3.6.1.4.1.42229.1.2.10.3
ntpAssociationTable	1.3.6.1.4.1.42229.1.2.10.3.1		not-accessible	NULL
ntpAssociationEntry	1.3.6.1.4.1.42229.1.2.10.3.1.1		not-accessible	Entry of ntpAssociationTable
ADR ntpAssociationSource	1.3.6.1.4.1.42229.1.2.10.3.1.1.1	IetfInetTypesIpv4AddressNoZone	read-only	Indicates the ntp-association-source.
INT ntpAssociationType	1.3.6.1.4.1.42229.1.2.10.3.1.1.2	INTEGER	read-only	Indicates the ntp association type.
T/F ntpAssociationPreferredNtpAssociation	1.3.6.1.4.1.42229.1.2.10.3.1.1.3	TruthValue	read-only	Indicates if this is preferred.
INT ntpAssociationNtpAdminState	1.3.6.1.4.1.42229.1.2.10.3.1.1.4	INTEGER	read-only	The administrative state specifies the permission to use or prohibition against using the resource. default value :up
ntpAssociationStatus	1.3.6.1.4.1.42229.1.2.10.4
ntpAssociationStatusTable	1.3.6.1.4.1.42229.1.2.10.4.1		not-accessible	NULL
ntpAssociationStatusEntry	1.3.6.1.4.1.42229.1.2.10.4.1.1		not-accessible	Entry of ntpAssociationStatusTable
OCT ntpAssociationStatusNtpAssociationRefid	1.3.6.1.4.1.42229.1.2.10.4.1.1.1	OCTET STRING	read-only	Reference clock type or address for the peer.
U32 ntpAssociationStatusNtpStratum	1.3.6.1.4.1.42229.1.2.10.4.1.1.2	Unsigned32	read-only	This attribute indicates the stratum of local clock. A value of 0, indicates that Stratum in Unspecified.
U32 ntpAssociationStatusNtpPollingInterval	1.3.6.1.4.1.42229.1.2.10.4.1.1.3	Unsigned32	read-only	NTP polling interval. This is an integer number indicating the HOST polling interval between transmitted messages, in seconds. UNITS:seconds
OCT ntpAssociationStatusNtpPrecision	1.3.6.1.4.1.42229.1.2.10.4.1.1.4	OCTET STRING	read-only	This is an unsigned floating-point number indicating the precision of the various clocks, in milliseconds. UNITS:milliseconds
OCT ntpAssociationStatusNtpAssociationOffset	1.3.6.1.4.1.42229.1.2.10.4.1.1.5	OCTET STRING	read-only	Indicates the offset between the local clock and the superior reference clock. UNITS:milliseconds
U32 ntpAssociationStatusNtpAssociationReach	1.3.6.1.4.1.42229.1.2.10.4.1.1.6	Unsigned32	read-only	Indicates the reachability of the configured server or peer.
OCT ntpAssociationStatusNtpAssociationDelay	1.3.6.1.4.1.42229.1.2.10.4.1.1.7	OCTET STRING	read-only	Indicates the delay between the local clock and the superior reference clock, in milliseconds. UNITS:milliseconds
OCT ntpAssociationStatusNtpAssociationDispersion	1.3.6.1.4.1.42229.1.2.10.4.1.1.8	OCTET STRING	read-only	Indicates the dispersion between the local clock and the peer clock, in milliseconds. UNITS:milliseconds
ztc	1.3.6.1.4.1.42229.1.2.11
ztcInfo	1.3.6.1.4.1.42229.1.2.11.1
T/F ztcEnabled	1.3.6.1.4.1.42229.1.2.11.1.1	TruthValue	read-only	enable/disable Zero Touch commissioning. default value :true
INT ztcStatus	1.3.6.1.4.1.42229.1.2.11.1.2	INTEGER	read-only	Shows the ZTC process status: disabled - ZTC will not be attempted because it was disabled via configuration ready - ZTC will be attempted when able to communicate with external ZTC server ongoing - ZTC is ongoing failed - some problems occurred during ZTC done - ZTC completed successfully. default value :ready
common	1.3.6.1.4.1.42229.1.2.13
bitErrorRatePreFec	1.3.6.1.4.1.42229.1.2.13.1
bitErrorRatePreFecTable	1.3.6.1.4.1.42229.1.2.13.1.1		not-accessible	statistics value: average, minimum, maximum and instant value for bit error rate before fec
bitErrorRatePreFecEntry	1.3.6.1.4.1.42229.1.2.13.1.1.1		not-accessible	Entry of bitErrorRatePreFecTable
OCT bitErrorRatePreFecInstant	1.3.6.1.4.1.42229.1.2.13.1.1.1.1	OCTET STRING	read-only	the instant value of statistics counter UNITS:bit-ratio
OCT bitErrorRatePreFecAvg	1.3.6.1.4.1.42229.1.2.13.1.1.1.2	OCTET STRING	read-only	the average value of statistics counter UNITS:bit-ratio
OCT bitErrorRatePreFecMin	1.3.6.1.4.1.42229.1.2.13.1.1.1.3	OCTET STRING	read-only	the minimum value of statistics counter UNITS:bit-ratio
OCT bitErrorRatePreFecMax	1.3.6.1.4.1.42229.1.2.13.1.1.1.4	OCTET STRING	read-only	the maximum value of statistics counter UNITS:bit-ratio
bitErrorRatePostFec	1.3.6.1.4.1.42229.1.2.13.2
bitErrorRatePostFecTable	1.3.6.1.4.1.42229.1.2.13.2.1		not-accessible	statistics value: average, minimum, maximum and instant value for bit error rate post fec
bitErrorRatePostFecEntry	1.3.6.1.4.1.42229.1.2.13.2.1.1		not-accessible	Entry of bitErrorRatePostFecTable
OCT bitErrorRatePostFecInstant	1.3.6.1.4.1.42229.1.2.13.2.1.1.1	OCTET STRING	read-only	the instant value of statistics counter UNITS:bit-ratio
OCT bitErrorRatePostFecAvg	1.3.6.1.4.1.42229.1.2.13.2.1.1.2	OCTET STRING	read-only	the average value of statistics counter UNITS:bit-ratio
OCT bitErrorRatePostFecMin	1.3.6.1.4.1.42229.1.2.13.2.1.1.3	OCTET STRING	read-only	the minimum value of statistics counter UNITS:bit-ratio
OCT bitErrorRatePostFecMax	1.3.6.1.4.1.42229.1.2.13.2.1.1.4	OCTET STRING	read-only	the maximum value of statistics counter UNITS:bit-ratio
inUtilization	1.3.6.1.4.1.42229.1.2.13.3
inUtilizationTable	1.3.6.1.4.1.42229.1.2.13.3.1		not-accessible	statistics value: average, minimum, maximum and instant value for RX utilization
inUtilizationEntry	1.3.6.1.4.1.42229.1.2.13.3.1.1		not-accessible	Entry of inUtilizationTable
COR inUtilizationInstant	1.3.6.1.4.1.42229.1.2.13.3.1.1.1	CoriantTypesPercentage	read-only	the instant value of statistics counter
COR inUtilizationAvg	1.3.6.1.4.1.42229.1.2.13.3.1.1.2	CoriantTypesPercentage	read-only	the average value of statistics counter
COR inUtilizationMin	1.3.6.1.4.1.42229.1.2.13.3.1.1.3	CoriantTypesPercentage	read-only	the minimum value of statistics counter
COR inUtilizationMax	1.3.6.1.4.1.42229.1.2.13.3.1.1.4	CoriantTypesPercentage	read-only	the maximum value of statistics counter
outUtilization	1.3.6.1.4.1.42229.1.2.13.4
outUtilizationTable	1.3.6.1.4.1.42229.1.2.13.4.1		not-accessible	statistics value: average, minimum, maximum and instant value for TX utilization
outUtilizationEntry	1.3.6.1.4.1.42229.1.2.13.4.1.1		not-accessible	Entry of outUtilizationTable
COR outUtilizationInstant	1.3.6.1.4.1.42229.1.2.13.4.1.1.1	CoriantTypesPercentage	read-only	the instant value of statistics counter
COR outUtilizationAvg	1.3.6.1.4.1.42229.1.2.13.4.1.1.2	CoriantTypesPercentage	read-only	the average value of statistics counter
COR outUtilizationMin	1.3.6.1.4.1.42229.1.2.13.4.1.1.3	CoriantTypesPercentage	read-only	the minimum value of statistics counter
COR outUtilizationMax	1.3.6.1.4.1.42229.1.2.13.4.1.1.4	CoriantTypesPercentage	read-only	the maximum value of statistics counter
oduDelay	1.3.6.1.4.1.42229.1.2.13.23
oduDelayTable	1.3.6.1.4.1.42229.1.2.13.23.1		not-accessible	statistics value: average, minimum, maximum and instant value for measured odu signal delay
oduDelayEntry	1.3.6.1.4.1.42229.1.2.13.23.1.1		not-accessible	Entry of oduDelayTable
OCT oduDelayInstant	1.3.6.1.4.1.42229.1.2.13.23.1.1.1	OCTET STRING	read-only	the instant value of statistics counter UNITS:microseconds
OCT oduDelayAvg	1.3.6.1.4.1.42229.1.2.13.23.1.1.2	OCTET STRING	read-only	the average value of statistics counter UNITS:microseconds
OCT oduDelayMin	1.3.6.1.4.1.42229.1.2.13.23.1.1.3	OCTET STRING	read-only	the minimum value of statistics counter UNITS:microseconds
OCT oduDelayMax	1.3.6.1.4.1.42229.1.2.13.23.1.1.4	OCTET STRING	read-only	the maximum value of statistics counter UNITS:microseconds
inOpticalPower	1.3.6.1.4.1.42229.1.2.13.24
inOpticalPowerTable	1.3.6.1.4.1.42229.1.2.13.24.1		not-accessible	statistics value: average, minimum, maximum and instant value for RX optical power
inOpticalPowerEntry	1.3.6.1.4.1.42229.1.2.13.24.1.1		not-accessible	Entry of inOpticalPowerTable
COR inOpticalPowerInstant	1.3.6.1.4.1.42229.1.2.13.24.1.1.1	CoriantTypesOpticalPower	read-only	the instant value of statistics counter
COR inOpticalPowerAvg	1.3.6.1.4.1.42229.1.2.13.24.1.1.2	CoriantTypesOpticalPower	read-only	the average value of statistics counter
COR inOpticalPowerMin	1.3.6.1.4.1.42229.1.2.13.24.1.1.3	CoriantTypesOpticalPower	read-only	the minimum value of statistics counter
COR inOpticalPowerMax	1.3.6.1.4.1.42229.1.2.13.24.1.1.4	CoriantTypesOpticalPower	read-only	the maximum value of statistics counter
outOpticalPower	1.3.6.1.4.1.42229.1.2.13.25
outOpticalPowerTable	1.3.6.1.4.1.42229.1.2.13.25.1		not-accessible	statistics value: average, minimum, maximum and instant value for TX optical power
outOpticalPowerEntry	1.3.6.1.4.1.42229.1.2.13.25.1.1		not-accessible	Entry of outOpticalPowerTable
COR outOpticalPowerInstant	1.3.6.1.4.1.42229.1.2.13.25.1.1.1	CoriantTypesOpticalPower	read-only	the instant value of statistics counter
COR outOpticalPowerAvg	1.3.6.1.4.1.42229.1.2.13.25.1.1.2	CoriantTypesOpticalPower	read-only	the average value of statistics counter
COR outOpticalPowerMin	1.3.6.1.4.1.42229.1.2.13.25.1.1.3	CoriantTypesOpticalPower	read-only	the minimum value of statistics counter
COR outOpticalPowerMax	1.3.6.1.4.1.42229.1.2.13.25.1.1.4	CoriantTypesOpticalPower	read-only	the maximum value of statistics counter
differentialGroupDelay	1.3.6.1.4.1.42229.1.2.13.26
differentialGroupDelayTable	1.3.6.1.4.1.42229.1.2.13.26.1		not-accessible	statistics value: average, minimum, maximum and instant value for differential group delay
differentialGroupDelayEntry	1.3.6.1.4.1.42229.1.2.13.26.1.1		not-accessible	Entry of differentialGroupDelayTable
U32 differentialGroupDelayInstant	1.3.6.1.4.1.42229.1.2.13.26.1.1.1	Unsigned32	read-only	the instant value of statistics counter UNITS:ps
U32 differentialGroupDelayAvg	1.3.6.1.4.1.42229.1.2.13.26.1.1.2	Unsigned32	read-only	the average value of statistics counter UNITS:ps
U32 differentialGroupDelayMin	1.3.6.1.4.1.42229.1.2.13.26.1.1.3	Unsigned32	read-only	the minimum value of statistics counter UNITS:ps
U32 differentialGroupDelayMax	1.3.6.1.4.1.42229.1.2.13.26.1.1.4	Unsigned32	read-only	the maximum value of statistics counter UNITS:ps
chromaticDispersion	1.3.6.1.4.1.42229.1.2.13.27
chromaticDispersionTable	1.3.6.1.4.1.42229.1.2.13.27.1		not-accessible	statistics value: average, minimum, maximum and instant value for chromatic dispersion
chromaticDispersionEntry	1.3.6.1.4.1.42229.1.2.13.27.1.1		not-accessible	Entry of chromaticDispersionTable
INT chromaticDispersionInstant	1.3.6.1.4.1.42229.1.2.13.27.1.1.1	INTEGER	read-only	the instant value of statistics counter UNITS:ps/nm
INT chromaticDispersionAvg	1.3.6.1.4.1.42229.1.2.13.27.1.1.2	INTEGER	read-only	the average value of statistics counter UNITS:ps/pm
INT chromaticDispersionMin	1.3.6.1.4.1.42229.1.2.13.27.1.1.3	INTEGER	read-only	the minimum value of statistics counter UNITS:ps/pm
INT chromaticDispersionMax	1.3.6.1.4.1.42229.1.2.13.27.1.1.4	INTEGER	read-only	the maximum value of statistics counter UNITS:ps/pm
osnr	1.3.6.1.4.1.42229.1.2.13.28
osnrTable	1.3.6.1.4.1.42229.1.2.13.28.1		not-accessible	statistics value: average, minimum, maximum and instant value for osnr
osnrEntry	1.3.6.1.4.1.42229.1.2.13.28.1.1		not-accessible	Entry of osnrTable
COR osnrInstant	1.3.6.1.4.1.42229.1.2.13.28.1.1.1	CoriantTypesDBPrecision1	read-only	the instant value of statistics counter
COR osnrAvg	1.3.6.1.4.1.42229.1.2.13.28.1.1.2	CoriantTypesDBPrecision1	read-only	the average value of statistics counter
COR osnrMin	1.3.6.1.4.1.42229.1.2.13.28.1.1.3	CoriantTypesDBPrecision1	read-only	the minimum value of statistics counter
COR osnrMax	1.3.6.1.4.1.42229.1.2.13.28.1.1.4	CoriantTypesDBPrecision1	read-only	the maximum value of statistics counter
qFactor	1.3.6.1.4.1.42229.1.2.13.29
qFactorTable	1.3.6.1.4.1.42229.1.2.13.29.1		not-accessible	statistics value: average, minimum, maximum and instant value for q-factor
qFactorEntry	1.3.6.1.4.1.42229.1.2.13.29.1.1		not-accessible	Entry of qFactorTable
COR qFactorInstant	1.3.6.1.4.1.42229.1.2.13.29.1.1.1	CoriantTypesDBPrecision1	read-only	the instant value of statistics counter
COR qFactorAvg	1.3.6.1.4.1.42229.1.2.13.29.1.1.2	CoriantTypesDBPrecision1	read-only	the average value of statistics counter
COR qFactorMin	1.3.6.1.4.1.42229.1.2.13.29.1.1.3	CoriantTypesDBPrecision1	read-only	the minimum value of statistics counter
COR qFactorMax	1.3.6.1.4.1.42229.1.2.13.29.1.1.4	CoriantTypesDBPrecision1	read-only	the maximum value of statistics counter
polarizationDependentLoss	1.3.6.1.4.1.42229.1.2.13.30
polarizationDependentLossTable	1.3.6.1.4.1.42229.1.2.13.30.1		not-accessible	statistics value: average, minimum, maximum and instant value for polarization dependent loss
polarizationDependentLossEntry	1.3.6.1.4.1.42229.1.2.13.30.1.1		not-accessible	Entry of polarizationDependentLossTable
COR polarizationDependentLossInstant	1.3.6.1.4.1.42229.1.2.13.30.1.1.1	CoriantTypesDBPrecision1	read-only	the instant value of statistics counter
COR polarizationDependentLossAvg	1.3.6.1.4.1.42229.1.2.13.30.1.1.2	CoriantTypesDBPrecision1	read-only	the average value of statistics counter
COR polarizationDependentLossMin	1.3.6.1.4.1.42229.1.2.13.30.1.1.3	CoriantTypesDBPrecision1	read-only	the minimum value of statistics counter
COR polarizationDependentLossMax	1.3.6.1.4.1.42229.1.2.13.30.1.1.4	CoriantTypesDBPrecision1	read-only	the maximum value of statistics counter
inOpticalFrequency	1.3.6.1.4.1.42229.1.2.13.31
inOpticalFrequencyTable	1.3.6.1.4.1.42229.1.2.13.31.1		not-accessible	statistics value: average, minimum, maximum and instant value for RX optical frequency
inOpticalFrequencyEntry	1.3.6.1.4.1.42229.1.2.13.31.1.1		not-accessible	Entry of inOpticalFrequencyTable
U32 inOpticalFrequencyInstant	1.3.6.1.4.1.42229.1.2.13.31.1.1.1	Unsigned32	read-only	the instant value of statistics counter UNITS:MHz
U32 inOpticalFrequencyAvg	1.3.6.1.4.1.42229.1.2.13.31.1.1.2	Unsigned32	read-only	the average value of statistics counter UNITS:MHz
U32 inOpticalFrequencyMin	1.3.6.1.4.1.42229.1.2.13.31.1.1.3	Unsigned32	read-only	the minimum value of statistics counter UNITS:MHz
U32 inOpticalFrequencyMax	1.3.6.1.4.1.42229.1.2.13.31.1.1.4	Unsigned32	read-only	the maximum value of statistics counter UNITS:MHz
outOpticalFrequency	1.3.6.1.4.1.42229.1.2.13.32
outOpticalFrequencyTable	1.3.6.1.4.1.42229.1.2.13.32.1		not-accessible	statistics value: average, minimum, maximum and instant value for TX optical frequency
outOpticalFrequencyEntry	1.3.6.1.4.1.42229.1.2.13.32.1.1		not-accessible	Entry of outOpticalFrequencyTable
U32 outOpticalFrequencyInstant	1.3.6.1.4.1.42229.1.2.13.32.1.1.1	Unsigned32	read-only	the instant value of statistics counter UNITS:MHz
U32 outOpticalFrequencyAvg	1.3.6.1.4.1.42229.1.2.13.32.1.1.2	Unsigned32	read-only	the average value of statistics counter UNITS:MHz
U32 outOpticalFrequencyMin	1.3.6.1.4.1.42229.1.2.13.32.1.1.3	Unsigned32	read-only	the minimum value of statistics counter UNITS:MHz
U32 outOpticalFrequencyMax	1.3.6.1.4.1.42229.1.2.13.32.1.1.4	Unsigned32	read-only	the maximum value of statistics counter UNITS:MHz
inOpticalPowerLaneHigh	1.3.6.1.4.1.42229.1.2.13.33
inOpticalPowerLaneHighTable	1.3.6.1.4.1.42229.1.2.13.33.1		not-accessible	statistics value: average, minimum, maximum and instant value for highest value of RX lane optical power
inOpticalPowerLaneHighEntry	1.3.6.1.4.1.42229.1.2.13.33.1.1		not-accessible	Entry of inOpticalPowerLaneHighTable
COR inOpticalPowerLaneHighInstant	1.3.6.1.4.1.42229.1.2.13.33.1.1.1	CoriantTypesOpticalPower	read-only	the instant value of statistics counter
COR inOpticalPowerLaneHighAvg	1.3.6.1.4.1.42229.1.2.13.33.1.1.2	CoriantTypesOpticalPower	read-only	the average value of statistics counter
COR inOpticalPowerLaneHighMin	1.3.6.1.4.1.42229.1.2.13.33.1.1.3	CoriantTypesOpticalPower	read-only	the minimum value of statistics counter
COR inOpticalPowerLaneHighMax	1.3.6.1.4.1.42229.1.2.13.33.1.1.4	CoriantTypesOpticalPower	read-only	the maximum value of statistics counter
inOpticalPowerLaneLow	1.3.6.1.4.1.42229.1.2.13.34
inOpticalPowerLaneLowTable	1.3.6.1.4.1.42229.1.2.13.34.1		not-accessible	statistics value: average, minimum, maximum and instant value for lowest value of RX lane optical power
inOpticalPowerLaneLowEntry	1.3.6.1.4.1.42229.1.2.13.34.1.1		not-accessible	Entry of inOpticalPowerLaneLowTable
COR inOpticalPowerLaneLowInstant	1.3.6.1.4.1.42229.1.2.13.34.1.1.1	CoriantTypesOpticalPower	read-only	the instant value of statistics counter
COR inOpticalPowerLaneLowAvg	1.3.6.1.4.1.42229.1.2.13.34.1.1.2	CoriantTypesOpticalPower	read-only	the average value of statistics counter
COR inOpticalPowerLaneLowMin	1.3.6.1.4.1.42229.1.2.13.34.1.1.3	CoriantTypesOpticalPower	read-only	the minimum value of statistics counter
COR inOpticalPowerLaneLowMax	1.3.6.1.4.1.42229.1.2.13.34.1.1.4	CoriantTypesOpticalPower	read-only	the maximum value of statistics counter
inOpticalPowerLaneTotal	1.3.6.1.4.1.42229.1.2.13.35
inOpticalPowerLaneTotalTable	1.3.6.1.4.1.42229.1.2.13.35.1		not-accessible	statistics value: average, minimum, maximum and instant value for total value of RX lane optical power
inOpticalPowerLaneTotalEntry	1.3.6.1.4.1.42229.1.2.13.35.1.1		not-accessible	Entry of inOpticalPowerLaneTotalTable
COR inOpticalPowerLaneTotalInstant	1.3.6.1.4.1.42229.1.2.13.35.1.1.1	CoriantTypesOpticalPower	read-only	the instant value of statistics counter
COR inOpticalPowerLaneTotalAvg	1.3.6.1.4.1.42229.1.2.13.35.1.1.2	CoriantTypesOpticalPower	read-only	the average value of statistics counter
COR inOpticalPowerLaneTotalMin	1.3.6.1.4.1.42229.1.2.13.35.1.1.3	CoriantTypesOpticalPower	read-only	the minimum value of statistics counter
COR inOpticalPowerLaneTotalMax	1.3.6.1.4.1.42229.1.2.13.35.1.1.4	CoriantTypesOpticalPower	read-only	the maximum value of statistics counter
outOpticalPowerLaneHigh	1.3.6.1.4.1.42229.1.2.13.36
outOpticalPowerLaneHighTable	1.3.6.1.4.1.42229.1.2.13.36.1		not-accessible	statistics value: average, minimum, maximum and instant value for highest value of TX lane optical power
outOpticalPowerLaneHighEntry	1.3.6.1.4.1.42229.1.2.13.36.1.1		not-accessible	Entry of outOpticalPowerLaneHighTable
COR outOpticalPowerLaneHighInstant	1.3.6.1.4.1.42229.1.2.13.36.1.1.1	CoriantTypesOpticalPower	read-only	the instant value of statistics counter
COR outOpticalPowerLaneHighAvg	1.3.6.1.4.1.42229.1.2.13.36.1.1.2	CoriantTypesOpticalPower	read-only	the average value of statistics counter
COR outOpticalPowerLaneHighMin	1.3.6.1.4.1.42229.1.2.13.36.1.1.3	CoriantTypesOpticalPower	read-only	the minimum value of statistics counter
COR outOpticalPowerLaneHighMax	1.3.6.1.4.1.42229.1.2.13.36.1.1.4	CoriantTypesOpticalPower	read-only	the maximum value of statistics counter
outOpticalPowerLaneLow	1.3.6.1.4.1.42229.1.2.13.37
outOpticalPowerLaneLowTable	1.3.6.1.4.1.42229.1.2.13.37.1		not-accessible	statistics value: average, minimum, maximum and instant value for lowest value of TX lane optical power
outOpticalPowerLaneLowEntry	1.3.6.1.4.1.42229.1.2.13.37.1.1		not-accessible	Entry of outOpticalPowerLaneLowTable
COR outOpticalPowerLaneLowInstant	1.3.6.1.4.1.42229.1.2.13.37.1.1.1	CoriantTypesOpticalPower	read-only	the instant value of statistics counter
COR outOpticalPowerLaneLowAvg	1.3.6.1.4.1.42229.1.2.13.37.1.1.2	CoriantTypesOpticalPower	read-only	the average value of statistics counter
COR outOpticalPowerLaneLowMin	1.3.6.1.4.1.42229.1.2.13.37.1.1.3	CoriantTypesOpticalPower	read-only	the minimum value of statistics counter
COR outOpticalPowerLaneLowMax	1.3.6.1.4.1.42229.1.2.13.37.1.1.4	CoriantTypesOpticalPower	read-only	the maximum value of statistics counter
outOpticalPowerLaneTotal	1.3.6.1.4.1.42229.1.2.13.38
outOpticalPowerLaneTotalTable	1.3.6.1.4.1.42229.1.2.13.38.1		not-accessible	statistics value: average, minimum, maximum and instant value for total value of TX lane optical power
outOpticalPowerLaneTotalEntry	1.3.6.1.4.1.42229.1.2.13.38.1.1		not-accessible	Entry of outOpticalPowerLaneTotalTable
COR outOpticalPowerLaneTotalInstant	1.3.6.1.4.1.42229.1.2.13.38.1.1.1	CoriantTypesOpticalPower	read-only	the instant value of statistics counter
COR outOpticalPowerLaneTotalAvg	1.3.6.1.4.1.42229.1.2.13.38.1.1.2	CoriantTypesOpticalPower	read-only	the average value of statistics counter
COR outOpticalPowerLaneTotalMin	1.3.6.1.4.1.42229.1.2.13.38.1.1.3	CoriantTypesOpticalPower	read-only	the minimum value of statistics counter
COR outOpticalPowerLaneTotalMax	1.3.6.1.4.1.42229.1.2.13.38.1.1.4	CoriantTypesOpticalPower	read-only	the maximum value of statistics counter
moduleTemperature	1.3.6.1.4.1.42229.1.2.13.39
moduleTemperatureTable	1.3.6.1.4.1.42229.1.2.13.39.1		not-accessible	statistics value: average, minimum, maximum and instant value for module temperature
moduleTemperatureEntry	1.3.6.1.4.1.42229.1.2.13.39.1.1		not-accessible	Entry of moduleTemperatureTable
COR moduleTemperatureInstant	1.3.6.1.4.1.42229.1.2.13.39.1.1.1	CoriantTypesTemperaturePrecision3	read-only	the instant value of statistics counter
COR moduleTemperatureAvg	1.3.6.1.4.1.42229.1.2.13.39.1.1.2	CoriantTypesTemperaturePrecision3	read-only	the average value of statistics counter
COR moduleTemperatureMin	1.3.6.1.4.1.42229.1.2.13.39.1.1.3	CoriantTypesTemperaturePrecision3	read-only	the minimum value of statistics counter
COR moduleTemperatureMax	1.3.6.1.4.1.42229.1.2.13.39.1.1.4	CoriantTypesTemperaturePrecision3	read-only	the maximum value of statistics counter
inletTemperature	1.3.6.1.4.1.42229.1.2.13.40
inletTemperatureTable	1.3.6.1.4.1.42229.1.2.13.40.1		not-accessible	statistics value: average, minimum, maximum and instant value for inlet temperature
inletTemperatureEntry	1.3.6.1.4.1.42229.1.2.13.40.1.1		not-accessible	Entry of inletTemperatureTable
COR inletTemperatureInstant	1.3.6.1.4.1.42229.1.2.13.40.1.1.1	CoriantTypesTemperaturePrecision3	read-only	the instant value of statistics counter
COR inletTemperatureAvg	1.3.6.1.4.1.42229.1.2.13.40.1.1.2	CoriantTypesTemperaturePrecision3	read-only	the average value of statistics counter
COR inletTemperatureMin	1.3.6.1.4.1.42229.1.2.13.40.1.1.3	CoriantTypesTemperaturePrecision3	read-only	the minimum value of statistics counter
COR inletTemperatureMax	1.3.6.1.4.1.42229.1.2.13.40.1.1.4	CoriantTypesTemperaturePrecision3	read-only	the maximum value of statistics counter
outletTemperature	1.3.6.1.4.1.42229.1.2.13.41
outletTemperatureTable	1.3.6.1.4.1.42229.1.2.13.41.1		not-accessible	statistics value: average, minimum, maximum and instant value for outlet temperature
outletTemperatureEntry	1.3.6.1.4.1.42229.1.2.13.41.1.1		not-accessible	Entry of outletTemperatureTable
COR outletTemperatureInstant	1.3.6.1.4.1.42229.1.2.13.41.1.1.1	CoriantTypesTemperaturePrecision3	read-only	the instant value of statistics counter
COR outletTemperatureAvg	1.3.6.1.4.1.42229.1.2.13.41.1.1.2	CoriantTypesTemperaturePrecision3	read-only	the average value of statistics counter
COR outletTemperatureMin	1.3.6.1.4.1.42229.1.2.13.41.1.1.3	CoriantTypesTemperaturePrecision3	read-only	the minimum value of statistics counter
COR outletTemperatureMax	1.3.6.1.4.1.42229.1.2.13.41.1.1.4	CoriantTypesTemperaturePrecision3	read-only	the maximum value of statistics counter

RFC description

SNMP management MIB for Coriant Groove G30 optical transport equipment and OTN paths.

Start monitoring Coriant Groove optical transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CORIANT-GROOVE-MIB

What Is CORIANT-GROOVE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description