All MIBs › CM-FACILITY-MIB › e3t3AdminState
e3t3AdminState
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::e3t3AdminState
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.51.1.5
Node type: OBJECT-TYPE
Type: AdminState
Access: read-write
Description:
This object represents the Administrative State of the E3/T3.
What is e3t3AdminState?
This object sets the desired administrative state (in-service or out-of-service) for an E3 or T3 telecommunications facility. An E3/T3 is a high-speed digital transmission line (34 Mbps or 45 Mbps) used in WAN networks; the admin state controls whether the facility is enabled for traffic. Network operators use this object to take facilities in and out of service for maintenance, troubleshooting, or planned capacity adjustments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.51.1.5 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::e3t3AdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.51.1.5.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::e3t3AdminState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.51.1.5.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.51 | e3t3Table | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1 | e3t3Entry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.5 | e3t3AdminState | CM-FACILITY-MIB |